.powerpc-utils.metadata

@@ -0,0 +1 @@
+4596fced545f3c751ff2665663baaed0db7ab7ce SOURCES/powerpc-utils-1.3.10.tar.gz

SOURCES/0001-scripts-bootlist-Support-multiple-dev-paths-for-a-nv.patch

@@ -0,0 +1,171 @@
+From edf7ee0e03e60140bcbe34ec458e1361678a5dd2 Mon Sep 17 00:00:00 2001
+From: Wen Xiong <wenxiong@linux.ibm.com>
+Date: Thu, 25 Jan 2024 23:49:21 -0500
+Subject: [PATCH] scripts/bootlist: Support multiple dev paths for a nvme boot
+ device
+
+Multipath splitter drawer is going to support two physical paths for
+each nvme device.
+This patch adds the support for multiple device/of paths for a nvme boot
+device.
+
+For example,
+
+U50EE.001.WZS000E-P3-C1-R1  U.2 PCI-E capable, Rev 4, 4x lanes with 2x
+lanes connected  0581:10:00.0
+U50EE.001.WZS000E-P3-C1-R2  U.2 PCI-E capable, Rev 4, 4x lanes with 2x
+lanes connected  0521:10:00.0
+
+nvme-subsys1 -
+NQN=nqn.1994-11.com.samsung:nvme:PM1735a:2.5-inch:S6RUNE0R900042
+               hostnqn=nqn.2014-08.org.nvmexpress:uuid:3c6c1ace-e9b1-4a17-8ff0-6a84d3dd15f4
+               iopolicy=numa
+\
+ +- nvme1 pcie 0523:20:00.0 live
+ +- nvme0 pcie 0583:20:00.0 live
+
+Node                  Generic               SN                   Model
+Namespace  Usage                      Format           FW Rev
+--------------------- --------------------- --------------------
+---------------------------------------- ----------
+-------------------------- ---------------- --------
+/dev/nvme1n1          /dev/ng1n1            S6RUNE0R900042       1.6TB
+NVMe Gen4 U.2 SSD III              0x1          1.60  TB /   1.60  TB
+4 KiB +  0 B   REV.SN66
+nvme0
+nvme1n1
+/pci@800000020000583/pci1014,6bc@0/namespace@1
+/pci@800000020000523/pci1014,6bc@0/namespace@1
+
+Signed-off-by: Wen Xiong <wenxiong@linux.ibm.com>
+---
+ scripts/bootlist | 80 +++++++++++++++++++++++++++++++++++++++---------
+ 1 file changed, 66 insertions(+), 14 deletions(-)
+
+diff --git a/scripts/bootlist b/scripts/bootlist
+index cc8718e..dcb5c00 100755
+--- a/scripts/bootlist
++++ b/scripts/bootlist
+@@ -304,6 +304,21 @@ is_nvmf_device()
+ 	fi
+ }
+ 
++# is_multipath_nvme_device
++# Check to see if this is a multipath nvme device
++#
++is_multipath_nvme_device()
++{
++	local res
++
++	res=`$FIND /sys/devices/virtual/nvme-subsystem -name $1 2>/dev/null`
++	if [[ ${#res} = 0 ]]; then
++		echo "no"
++	else
++		echo "yes"
++	fi
++}
++
+ # get_link
+ # return the directory path that a link points to.
+ # The only parameter is the link name.
+@@ -340,6 +355,32 @@ add_nvmf()
+ 	fi
+ }
+ 
++add_multipath_nvme() 
++{
++	local DEVNAME=$1
++
++	ctrl_name=$DEVNAME
++	local startctr=$ctr
++
++	local dir
++	for dir in `$FIND /sys/devices/virtual/nvme-subsystem -name "$ctrl_name"`; do
++		cd $dir
++		cd ..
++		for slave in `ls -d $PWD/nvme*`; do
++		    slavedev=${slave##*/}
++		    if [[ "$slavedev" != *nvme*n* ]] ; then
++			    LOGICAL_NAMES[$ctr]=${slavedev}
++			    ctr=$[$ctr + 1]
++		    fi
++		done
++	done
++
++	if [[ "$startctr" = "$ctr" ]] ; then
++		LOGICAL_NAMES[$ctr]=$1
++		ctr=$[$ctr + 1]
++	fi
++}
++
+ add_logical()
+ {
+     local DEVNAME=$1
+@@ -487,31 +528,40 @@ while [[ -n $1 ]]; do
+         if [[ "$1" == *"dm-"* ]] ; then
+             add_logical $1
+         else
+-            if [[ "$1" == *"nvme-of"* ]]; then
++            if [[ "$1" == *"nvme-of"* ]] || [[ "$1" == *"namespace"* ]]; then
+                 ctrl_name=`get_logical_device_name $1`
++		master_of_path=$1
+             else
+             	ctrl_name=$1
+             	ctrl_name=${ctrl_name##*/}
++		master_of_path=`get_of_device_name $1`
+             fi
++
++	    if [[ -z $master_of_path ]]; then
++                echo "Device $1 does not appear to be valid." >&2
++                exit 1
++            fi
++
+             ctrl_name="${ctrl_name%n[0-9]*}"
+             is_nvmf=$(is_nvmf_device $ctrl_name)
+             if [[ $is_nvmf = "yes" ]]; then
+-                if [[ "$1" == *"nvme-of"* ]]; then
+-                    master_of_path=$1
+-                else
+-                    master_of_path=`get_of_device_name $1`
+-                fi
+-
+-                if [[ -z $master_of_path ]]; then
+-                    echo "Device $1 does not appear to be valid." >&2
+-                    exit 1
+-                fi
+-
+                 namespace_base=${master_of_path##*/}
+                 DEVTYPE="nvme-of"
+                 add_nvmf $ctrl_name
+             else
+-                add_logical $1
++	       	is_multipath_nvme=$(is_multipath_nvme_device $ctrl_name)
++                if [[ $is_multipath_nvme = "yes" ]]; then
++                    if [[ "$master_of_path" == *namespace* ]] ; then
++                        namespace_base=${master_of_path##*/}
++		    else
++		        echo "Device $1 does not appear to be valid." >&2
++		        exit 1
++                    fi
++                    DEVTYPE="multi-nvme"
++                    add_multipath_nvme $ctrl_name
++                else 
++                    add_logical $1
++		fi
+             fi
+         fi
+     fi
+@@ -534,8 +584,10 @@ if [[ ${#LOGICAL_NAMES[*]} -ne 0 ]]; then
+         if [[ -z ${OF_DEVPATH[$ctr]} ]]; then
+ 	    # See if this is an OF pathname
+ 	    OF_DEVPATH[$ctr]=`get_of_device_name ${LOGICAL_NAMES[$ctr]}`
+-	    if [[ $DEVTYPE = "nvme-of" ]]; then
++	    if [[ $DEVTYPE = "nvme-of" ]] || [[ $DEVTYPE = "multi-nvme" ]]; then
+ 		    OF_DEVPATH[$ctr]=${OF_DEVPATH[$ctr]}/$namespace_base
++            else
++		    OF_DEVPATH[$ctr]=${OF_DEVPATH[$ctr]}
+ 	    fi
+ 	else
+ 	    OF_DEVPATH[$ctr]=${LOGICAL_NAMES[$ctr]}
+-- 
+2.35.3

SOURCES/powerpc-utils-1.3.10-lparstat-Fix-negative-values-seen-while-running-lpar.patch

@@ -1,84 +0,0 @@
-commit 73ba26c1240a25e7699449e82cfc09dad10fed80
-Author: Sathvika Vasireddy <sv@linux.ibm.com>
-Date:   Fri Dec 9 15:26:46 2022 +0530
-
-    lparstat: Fix negative values seen while running lparstat with -E option
-    
-    Negative values are seen while running lparstat with -E option.
-    This is because delta_purr value is less than delta_idle_purr.
-    Given that these values are read from different sources, a
-    small variation in the values is possible. So, in such cases,
-    round down delta_idle_purr to delta_purr.
-    
-    Without this patch:
-    =====
-    System Configuration
-    type=Dedicated mode=Capped smt=8 lcpu=240 mem=67033290112 kB cpus=0
-    ent=240.00
-    
-    ---Actual---                 -Normalized-
-    %busy  %idle   Frequency     %busy  %idle
-    ------ ------  ------------- ------ ------
-     -0.03 100.02  3.93GHz[111%]   0.01 110.97
-      0.00 100.00  3.93GHz[111%]   0.01 110.99
-     -0.04 100.03  3.93GHz[111%]   0.01 110.98
-      0.06  99.95  3.93GHz[111%]   0.01 110.99
-      0.02  99.98  3.93GHz[111%]   0.01 110.99
-    =====
-    
-    With this patch:
-    =====
-    System Configuration
-    type=Dedicated mode=Capped smt=8 lcpu=240 mem=67033290112 kB cpus=0
-    ent=240.00
-    
-    ---Actual---                 -Normalized-
-    %busy  %idle   Frequency     %busy  %idle
-    ------ ------  ------------- ------ ------
-      0.03  99.96  3.93GHz[111%]   0.01 110.98
-      0.00 100.00  3.93GHz[111%]   0.01 110.99
-      0.03  99.97  3.93GHz[111%]   0.01 110.99
-      0.00 100.00  3.93GHz[111%]   0.01 110.99
-      0.09  99.90  3.93GHz[111%]   0.01 110.99
-    =====
-    
-    Reported-by: Shirisha Ganta <shirisha.ganta1@ibm.com>
-    Signed-off-by: Sathvika Vasireddy <sv@linux.ibm.com>
-    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
-
-diff --git a/src/lparstat.c b/src/lparstat.c
-index 31a4ee8..eebba1f 100644
---- a/src/lparstat.c
-+++ b/src/lparstat.c
-@@ -492,6 +492,15 @@ void get_cpu_util_purr(struct sysentry *unused_se, char *buf)
- 	delta_purr = get_delta_value("purr");
- 	delta_idle_purr = get_delta_value("idle_purr");
- 
-+	/*
-+	 * Given that these values are read from different
-+	 * sources (purr from lparcfg and idle_purr from sysfs),
-+	 * a small variation in the values is possible.
-+	 * In such cases, round down delta_idle_purr to delta_purr.
-+	 */
-+	if (delta_idle_purr > delta_purr)
-+		delta_idle_purr = delta_purr;
-+
- 	physc = (delta_purr - delta_idle_purr) / delta_tb;
- 	physc *= 100.00;
- 
-@@ -507,6 +516,15 @@ void get_cpu_idle_purr(struct sysentry *unused_se, char *buf)
- 	delta_purr = get_delta_value("purr");
- 	delta_idle_purr = get_delta_value("idle_purr");
- 
-+	/*
-+	 * Given that these values are read from different
-+	 * sources (purr from lparcfg and idle_purr from sysfs),
-+	 * a small variation in the values is possible.
-+	 * In such cases, round down delta_idle_purr to delta_purr.
-+	 */
-+	if (delta_idle_purr > delta_purr)
-+		delta_idle_purr = delta_purr;
-+
- 	physc = (delta_purr - delta_idle_purr) / delta_tb;
- 	idle = (delta_purr / delta_tb) - physc;
- 	idle *= 100.00;

SOURCES/powerpc-utils-1.3.10-manpages.patch

@@ -1,265 +1,26 @@
-diff -up powerpc-utils-1.3.5/man/pseries_platform.8.me powerpc-utils-1.3.5/man/pseries_platform.8
+diff -up powerpc-utils-1.3.10/Makefile.am.than powerpc-utils-1.3.10/Makefile.am
---- powerpc-utils-1.3.5/man/pseries_platform.8.me	2018-11-29 16:50:07.601034729 +0100
+--- powerpc-utils-1.3.10/Makefile.am.than	2023-11-27 22:07:33.391345328 +0100
-+++ powerpc-utils-1.3.5/man/pseries_platform.8	2018-11-29 16:50:07.601034729 +0100
++++ powerpc-utils-1.3.10/Makefile.am	2023-11-27 22:06:38.715373360 +0100
-@@ -0,0 +1,11 @@
+@@ -26,6 +26,16 @@ sbin_SCRIPTS = \
-+.\"
+ 	scripts/hcnmgr
-+.\" Copyright (C) 2015 International Business Machines
+ 
-+.\"
+ man_MANS = \
-+.TH pseries_platform 8 "September 2015" Linux "Linux on Power Service Tools"
++	man/lsdevinfo.8 \
-+.SH NAME
++	man/rtas_event_decode.8 \
-+pseries_platform \- identify the platform and display the name of platform
++	man/ls-vdev.8 \
-+.SH SYNOPSIS
++	man/lsprop.8 \
-+.B /usr/bin/pseries_platform
++	man/ls-veth.8 \
-+
++	man/nvsetenv.8 \
-+.SH DESCRIPTION
++	man/ls-vscsi.8 \
-+The \fIpseries_platform\fR tool can identify the platform and display the name of platform.
++	man/pseries_platform.8 \
-diff -up powerpc-utils-1.2.15/man/lsdevinfo.8.man powerpc-utils-1.2.15/man/lsdevinfo.8
++	man/update_flash_nv.8 \
---- powerpc-utils-1.2.15/man/lsdevinfo.8.man	2013-01-16 15:31:13.886591137 +0100
++	man/hcnmgr.8 \
-+++ powerpc-utils-1.2.15/man/lsdevinfo.8	2013-01-16 15:31:13.886591137 +0100
+ 	man/activate_firmware.8 \
-@@ -0,0 +1,39 @@
+ 	man/rtas_ibm_get_vpd.8 \
-+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
+ 	man/uesensor.8 \
-+.TH LSDEVINFO "8" "October 2010" "Linux" "Linux on Power Service Tools"
+diff -up powerpc-utils-1.3.10/man/hcnmgr.8.than powerpc-utils-1.3.10/man/hcnmgr.8
-+.SH NAME
+--- powerpc-utils-1.3.10/man/hcnmgr.8.than	2023-11-27 22:05:20.283979110 +0100
-+lsdevinfo - information on Virtual devices
++++ powerpc-utils-1.3.10/man/hcnmgr.8	2023-11-27 22:05:20.283979110 +0100
-+
-+.SH SYNOPSIS
-+.B lsdevinfo
-+[\fI-q criteria\fR] [\fI-F format\fR] [\fI-R\fR] [\fI-c\fR] [\fI-h\fR]
-+
-+.SH DESCRIPTION
-+Provide information on Virtual devices
-+.PP
-+
-+.SH OPTIONS
-+.TP
-+\fB\-q\fR criteria
-+Specifies a criteria to select which devices are to be displayed.
-+.TP
-+\fB\-F\fR format
-+Specifies the set of attributes to be displayed.
-+.TP
-+\fB\-R\fR
-+Recursively display children of selected devices
-+.TP
-+\fB\-c\fR
-+Display output as a comma separated list for each device.
-+.TP
-+\fB\-V\fR
-+Display version information and exit
-+.TP
-+\fB\-h\fR
-+Display help information and exit
-+
-+.SH AUTHOR
-+.B lsdevinfo
-+was written by Santiago Leon <sleon@ec.ibm.com>.
-+.PP
-+This manual page was written by Roman Rakus <rrakus@redhat.com>.
-+
-diff -up powerpc-utils-1.2.15/man/lsprop.8.man powerpc-utils-1.2.15/man/lsprop.8
---- powerpc-utils-1.2.15/man/lsprop.8.man	2013-01-16 15:31:13.886591137 +0100
-+++ powerpc-utils-1.2.15/man/lsprop.8	2013-01-16 15:31:13.886591137 +0100
-@@ -0,0 +1,42 @@
-+.TH LSPROP "8" "Sep 2010" "Linux" "Linux on Power Service Tools"
-+.SH NAME
-+lsprop \- list properties
-+.SH SYNOPSIS
-+.B lsprop
-+.RB [ \-R ]
-+.RB [ \-m
-+.IR max-bytes ]
-+.RB [ \-w
-+.IR num-words ]
-+.RI [ FILE .\|.\|.]
-+.SH OVERVIEW
-+.B lsprop
-+program is a member of the ppc64-utils suite of utils.
-+Use it to list properties
-+
-+.SH DESCRIPTION
-+.B lsprop
-+displays properties for
-+.IR FILE s
-+like Open Firmware
-+.I .properties
-+word.
-+If the
-+.I FILE
-+is not set, the current directory is used.
-+
-+.SH OPTIONS
-+.TP
-+.B \-R
-+Process recursively
-+.TP
-+.BI \-m " max-bytes"
-+Read only first
-+.I max-bytes
-+bytes from the
-+.IR FILE s
-+.TP
-+.BI \-w " num-words"
-+Display up to
-+.I num-words
-+words per line
-diff -up powerpc-utils-1.2.15/man/ls-vdev.8.man powerpc-utils-1.2.15/man/ls-vdev.8
---- powerpc-utils-1.2.15/man/ls-vdev.8.man	2013-01-16 15:31:13.886591137 +0100
-+++ powerpc-utils-1.2.15/man/ls-vdev.8	2013-01-16 15:31:13.886591137 +0100
-@@ -0,0 +1,25 @@
-+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
-+.TH LS-VDEV "8" "October 2010" "Linux" "Linux on Power Service Tools"
-+.SH NAME
-+ls-vdev \- information on Virtual SCSI adapters and devices
-+.SH SYNOPSIS
-+.BR ls-vdev " [" \-h " | " -V ]
-+
-+.SH DESCRIPTION
-+Provide information on Virtual SCSI adapters and devices
-+.PP
-+
-+.SH OPTIONS
-+.TP
-+\fB\-V\fR
-+Display version information and exit
-+.TP
-+\fB\-h\fR
-+Display help information and exit
-+.PP
-+
-+.SH AUTHOR
-+.B ls-vdev
-+was written by Brian King <brking@linux.vnet.ibm.com>.
-+.PP
-+This manual page was written by Roman Rakus <rrakus@redhat.com>.
-diff -up powerpc-utils-1.2.15/man/ls-veth.8.man powerpc-utils-1.2.15/man/ls-veth.8
---- powerpc-utils-1.2.15/man/ls-veth.8.man	2013-01-16 15:31:13.887591102 +0100
-+++ powerpc-utils-1.2.15/man/ls-veth.8	2013-01-16 15:31:13.887591102 +0100
-@@ -0,0 +1,25 @@
-+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
-+.TH LS-VETH "8" "October 2010" "Linux" "Linux on Power Service Tools"
-+.SH NAME
-+ls-veth \- information on Virtual Ethernet devices
-+.SH SYNOPSIS
-+.BR ls-veth " [" \-h " | " -V ]
-+
-+.SH DESCRIPTION
-+Provide information on Virtual Ethernet devices
-+.PP
-+
-+.SH OPTIONS
-+.TP
-+\fB\-V\fR
-+Display version information and exit
-+.TP
-+\fB\-h\fR
-+Display help information and exit
-+.PP
-+
-+.SH AUTHOR
-+.B ls-veth
-+was written by Brian King <brking@linux.vnet.ibm.com>.
-+.PP
-+This manual page was written by Roman Rakus <rrakus@redhat.com>.
-diff -up powerpc-utils-1.2.15/man/ls-vscsi.8.man powerpc-utils-1.2.15/man/ls-vscsi.8
---- powerpc-utils-1.2.15/man/ls-vscsi.8.man	2013-01-16 15:31:13.887591102 +0100
-+++ powerpc-utils-1.2.15/man/ls-vscsi.8	2013-01-16 15:31:13.887591102 +0100
-@@ -0,0 +1,25 @@
-+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
-+.TH LS-VSCSI "8" "October 2010" "Linux" "Linux on Power Service Tools"
-+.SH NAME
-+ls-vscsi \- information on Virtual devices
-+.SH SYNOPSIS
-+.BR ls-vscsi " [" \-h " | " -V ]
-+
-+.SH DESCRIPTION
-+Provide information on Virtual devices
-+.PP
-+
-+.SH OPTIONS
-+.TP
-+\fB\-V\fR
-+Display version information and exit
-+.TP
-+\fB\-h\fR
-+Display help information and exit
-+.PP
-+
-+.SH AUTHOR
-+.B ls-vscsi
-+was written by Brian King <brking@linux.vnet.ibm.com>.
-+.PP
-+This manual page was written by Roman Rakus <rrakus@redhat.com>.
-diff -up powerpc-utils-1.2.15/man/nvsetenv.8.man powerpc-utils-1.2.15/man/nvsetenv.8
---- powerpc-utils-1.2.15/man/nvsetenv.8.man	2013-01-16 15:31:13.887591102 +0100
-+++ powerpc-utils-1.2.15/man/nvsetenv.8	2013-01-16 15:31:13.887591102 +0100
-@@ -0,0 +1,29 @@
-+.TH NVSETENV "8" "Oct 2010" "Linux" "Linux on Power Service Tools"
-+.SH NAME
-+nvsetenv \- wrapper to invoke nvram
-+
-+.SH SYNOPSIS
-+.B nvsetenv
-+[ ARG1 ] [ ARG2 ]
-+
-+.SH DESCRIPTION
-+.B nvsetenv
-+is just a wrapper to invoke nvram
-+
-+.SH OPTIONS
-+
-+Without any argument, nvsetenv calls
-+.I nvram --print-config
-+
-+With one argument
-+.IR ARG1 ,
-+nvsetenv calls
-+.I nvram --print-config=ARG1
-+
-+With two arguments
-+.IR "ARG1 ARG2" ,
-+nvsetenv calls
-+.I nvram --update-config ARG1=ARG2
-+
-+.SH "SEE ALSO"
-+.IR nvram (8)
-diff -up powerpc-utils-1.2.15/man/rtas_event_decode.8.man powerpc-utils-1.2.15/man/rtas_event_decode.8
---- powerpc-utils-1.2.15/man/rtas_event_decode.8.man	2013-01-16 15:31:13.888591067 +0100
-+++ powerpc-utils-1.2.15/man/rtas_event_decode.8	2013-01-16 15:31:13.888591067 +0100
-@@ -0,0 +1,31 @@
-+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
-+.TH RTAS_EVENT_DECODE 8 "September 2010" "Linux" "Linux on Power Service Tools"
-+.SH NAME
-+\fBrtas_event_decode\fP - RTAS message decoder
-+.SH SYNOPSIS
-+.B rtas_event_decode
-+[\fI-dv\fR] [\fI-n eventnum\fR] [\fI-w width\fR]
-+.SH DESCRIPTION
-+RTAS messages are placed in the syslog encoded in a binary
-+format, and are unreadable.  This tool will take exactly one
-+message, parse it, and spit out the human-readable equivalent.
-+This program expects ascii data on stdin.
-+
-+This tool is mostly meant to be used in conjuction with the
-+rtas_dump shell script, which provides a suitable user 
-+interface.
-+
-+.SH OPTIONS
-+.TP
-+.B \-d
-+dump the raw RTAS event
-+.TP
-+.BI \-n " eventnum"
-+event number of the RTAS event being dumped
-+.TP
-+.B \-v
-+verbose, print all details, not just header
-+.TP
-+.BI \-w " width"
-+limit the output to the specified width, default width is 80 characters. The width must be > 0 and < 1024.
-+
-diff -up powerpc-utils-1.3.8/man/hcnmgr.8.me powerpc-utils-1.3.8/man/hcnmgr.8
---- powerpc-utils-1.3.8/man/hcnmgr.8.me	2021-02-08 13:18:50.115407652 +0100
-+++ powerpc-utils-1.3.8/man/hcnmgr.8	2021-02-08 13:18:43.734322981 +0100
 @@ -0,0 +1,47 @@
 +.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.6.
 +.TH HCNMGR "1" "hcnmgr contains a set of commands to support migratable SR_IOV logical port." "hcnmgr"
@@ -308,9 +69,268 @@ diff -up powerpc-utils-1.3.8/man/hcnmgr.8.me powerpc-utils-1.3.8/man/hcnmgr.8
 +was written by Mingming Cao <mingming.cao@ibm.com>.
 +.PP
 +This manual page was written by Than Ngo <than@redhat.com>.
-diff -up powerpc-utils-1.3.5/man/update_flash_nv.8.me powerpc-utils-1.3.5/man/update_flash_nv.8
+diff -up powerpc-utils-1.3.10/man/lsdevinfo.8.than powerpc-utils-1.3.10/man/lsdevinfo.8
---- powerpc-utils-1.3.5/man/update_flash_nv.8.me	2018-11-29 16:49:51.344987106 +0100
+--- powerpc-utils-1.3.10/man/lsdevinfo.8.than	2023-11-27 22:05:20.282979092 +0100
-+++ powerpc-utils-1.3.5/man/update_flash_nv.8	2018-11-29 16:49:42.589961458 +0100
++++ powerpc-utils-1.3.10/man/lsdevinfo.8	2023-11-27 22:05:20.282979092 +0100
+@@ -0,0 +1,39 @@
++.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
++.TH LSDEVINFO "8" "October 2010" "Linux" "Linux on Power Service Tools"
++.SH NAME
++lsdevinfo - information on Virtual devices
++
++.SH SYNOPSIS
++.B lsdevinfo
++[\fI-q criteria\fR] [\fI-F format\fR] [\fI-R\fR] [\fI-c\fR] [\fI-h\fR]
++
++.SH DESCRIPTION
++Provide information on Virtual devices
++.PP
++
++.SH OPTIONS
++.TP
++\fB\-q\fR criteria
++Specifies a criteria to select which devices are to be displayed.
++.TP
++\fB\-F\fR format
++Specifies the set of attributes to be displayed.
++.TP
++\fB\-R\fR
++Recursively display children of selected devices
++.TP
++\fB\-c\fR
++Display output as a comma separated list for each device.
++.TP
++\fB\-V\fR
++Display version information and exit
++.TP
++\fB\-h\fR
++Display help information and exit
++
++.SH AUTHOR
++.B lsdevinfo
++was written by Santiago Leon <sleon@ec.ibm.com>.
++.PP
++This manual page was written by Roman Rakus <rrakus@redhat.com>.
++
+diff -up powerpc-utils-1.3.10/man/lsprop.8.than powerpc-utils-1.3.10/man/lsprop.8
+--- powerpc-utils-1.3.10/man/lsprop.8.than	2023-11-27 22:05:20.283979110 +0100
++++ powerpc-utils-1.3.10/man/lsprop.8	2023-11-27 22:05:20.283979110 +0100
+@@ -0,0 +1,42 @@
++.TH LSPROP "8" "Sep 2010" "Linux" "Linux on Power Service Tools"
++.SH NAME
++lsprop \- list properties
++.SH SYNOPSIS
++.B lsprop
++.RB [ \-R ]
++.RB [ \-m
++.IR max-bytes ]
++.RB [ \-w
++.IR num-words ]
++.RI [ FILE .\|.\|.]
++.SH OVERVIEW
++.B lsprop
++program is a member of the ppc64-utils suite of utils.
++Use it to list properties
++
++.SH DESCRIPTION
++.B lsprop
++displays properties for
++.IR FILE s
++like Open Firmware
++.I .properties
++word.
++If the
++.I FILE
++is not set, the current directory is used.
++
++.SH OPTIONS
++.TP
++.B \-R
++Process recursively
++.TP
++.BI \-m " max-bytes"
++Read only first
++.I max-bytes
++bytes from the
++.IR FILE s
++.TP
++.BI \-w " num-words"
++Display up to
++.I num-words
++words per line
+diff -up powerpc-utils-1.3.10/man/ls-vdev.8.than powerpc-utils-1.3.10/man/ls-vdev.8
+--- powerpc-utils-1.3.10/man/ls-vdev.8.than	2023-11-27 22:05:20.283979110 +0100
++++ powerpc-utils-1.3.10/man/ls-vdev.8	2023-11-27 22:05:20.283979110 +0100
+@@ -0,0 +1,25 @@
++.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
++.TH LS-VDEV "8" "October 2010" "Linux" "Linux on Power Service Tools"
++.SH NAME
++ls-vdev \- information on Virtual SCSI adapters and devices
++.SH SYNOPSIS
++.BR ls-vdev " [" \-h " | " -V ]
++
++.SH DESCRIPTION
++Provide information on Virtual SCSI adapters and devices
++.PP
++
++.SH OPTIONS
++.TP
++\fB\-V\fR
++Display version information and exit
++.TP
++\fB\-h\fR
++Display help information and exit
++.PP
++
++.SH AUTHOR
++.B ls-vdev
++was written by Brian King <brking@linux.vnet.ibm.com>.
++.PP
++This manual page was written by Roman Rakus <rrakus@redhat.com>.
+diff -up powerpc-utils-1.3.10/man/ls-veth.8.than powerpc-utils-1.3.10/man/ls-veth.8
+--- powerpc-utils-1.3.10/man/ls-veth.8.than	2023-11-27 22:05:20.283979110 +0100
++++ powerpc-utils-1.3.10/man/ls-veth.8	2023-11-27 22:05:20.283979110 +0100
+@@ -0,0 +1,25 @@
++.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
++.TH LS-VETH "8" "October 2010" "Linux" "Linux on Power Service Tools"
++.SH NAME
++ls-veth \- information on Virtual Ethernet devices
++.SH SYNOPSIS
++.BR ls-veth " [" \-h " | " -V ]
++
++.SH DESCRIPTION
++Provide information on Virtual Ethernet devices
++.PP
++
++.SH OPTIONS
++.TP
++\fB\-V\fR
++Display version information and exit
++.TP
++\fB\-h\fR
++Display help information and exit
++.PP
++
++.SH AUTHOR
++.B ls-veth
++was written by Brian King <brking@linux.vnet.ibm.com>.
++.PP
++This manual page was written by Roman Rakus <rrakus@redhat.com>.
+diff -up powerpc-utils-1.3.10/man/ls-vscsi.8.than powerpc-utils-1.3.10/man/ls-vscsi.8
+--- powerpc-utils-1.3.10/man/ls-vscsi.8.than	2023-11-27 22:05:20.283979110 +0100
++++ powerpc-utils-1.3.10/man/ls-vscsi.8	2023-11-27 22:05:20.283979110 +0100
+@@ -0,0 +1,25 @@
++.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
++.TH LS-VSCSI "8" "October 2010" "Linux" "Linux on Power Service Tools"
++.SH NAME
++ls-vscsi \- information on Virtual devices
++.SH SYNOPSIS
++.BR ls-vscsi " [" \-h " | " -V ]
++
++.SH DESCRIPTION
++Provide information on Virtual devices
++.PP
++
++.SH OPTIONS
++.TP
++\fB\-V\fR
++Display version information and exit
++.TP
++\fB\-h\fR
++Display help information and exit
++.PP
++
++.SH AUTHOR
++.B ls-vscsi
++was written by Brian King <brking@linux.vnet.ibm.com>.
++.PP
++This manual page was written by Roman Rakus <rrakus@redhat.com>.
+diff -up powerpc-utils-1.3.10/man/nvsetenv.8.than powerpc-utils-1.3.10/man/nvsetenv.8
+--- powerpc-utils-1.3.10/man/nvsetenv.8.than	2023-11-27 22:05:20.283979110 +0100
++++ powerpc-utils-1.3.10/man/nvsetenv.8	2023-11-27 22:05:20.283979110 +0100
+@@ -0,0 +1,29 @@
++.TH NVSETENV "8" "Oct 2010" "Linux" "Linux on Power Service Tools"
++.SH NAME
++nvsetenv \- wrapper to invoke nvram
++
++.SH SYNOPSIS
++.B nvsetenv
++[ ARG1 ] [ ARG2 ]
++
++.SH DESCRIPTION
++.B nvsetenv
++is just a wrapper to invoke nvram
++
++.SH OPTIONS
++
++Without any argument, nvsetenv calls
++.I nvram --print-config
++
++With one argument
++.IR ARG1 ,
++nvsetenv calls
++.I nvram --print-config=ARG1
++
++With two arguments
++.IR "ARG1 ARG2" ,
++nvsetenv calls
++.I nvram --update-config ARG1=ARG2
++
++.SH "SEE ALSO"
++.IR nvram (8)
+diff -up powerpc-utils-1.3.10/man/pseries_platform.8.than powerpc-utils-1.3.10/man/pseries_platform.8
+--- powerpc-utils-1.3.10/man/pseries_platform.8.than	2023-11-27 22:05:20.282979092 +0100
++++ powerpc-utils-1.3.10/man/pseries_platform.8	2023-11-27 22:05:20.282979092 +0100
+@@ -0,0 +1,11 @@
++.\"
++.\" Copyright (C) 2015 International Business Machines
++.\"
++.TH pseries_platform 8 "September 2015" Linux "Linux on Power Service Tools"
++.SH NAME
++pseries_platform \- identify the platform and display the name of platform
++.SH SYNOPSIS
++.B /usr/bin/pseries_platform
++
++.SH DESCRIPTION
++The \fIpseries_platform\fR tool can identify the platform and display the name of platform.
+diff -up powerpc-utils-1.3.10/man/rtas_event_decode.8.than powerpc-utils-1.3.10/man/rtas_event_decode.8
+--- powerpc-utils-1.3.10/man/rtas_event_decode.8.than	2023-11-27 22:05:20.283979110 +0100
++++ powerpc-utils-1.3.10/man/rtas_event_decode.8	2023-11-27 22:05:20.283979110 +0100
+@@ -0,0 +1,31 @@
++.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
++.TH RTAS_EVENT_DECODE 8 "September 2010" "Linux" "Linux on Power Service Tools"
++.SH NAME
++\fBrtas_event_decode\fP - RTAS message decoder
++.SH SYNOPSIS
++.B rtas_event_decode
++[\fI-dv\fR] [\fI-n eventnum\fR] [\fI-w width\fR]
++.SH DESCRIPTION
++RTAS messages are placed in the syslog encoded in a binary
++format, and are unreadable.  This tool will take exactly one
++message, parse it, and spit out the human-readable equivalent.
++This program expects ascii data on stdin.
++
++This tool is mostly meant to be used in conjuction with the
++rtas_dump shell script, which provides a suitable user 
++interface.
++
++.SH OPTIONS
++.TP
++.B \-d
++dump the raw RTAS event
++.TP
++.BI \-n " eventnum"
++event number of the RTAS event being dumped
++.TP
++.B \-v
++verbose, print all details, not just header
++.TP
++.BI \-w " width"
++limit the output to the specified width, default width is 80 characters. The width must be > 0 and < 1024.
++
+diff -up powerpc-utils-1.3.10/man/update_flash_nv.8.than powerpc-utils-1.3.10/man/update_flash_nv.8
+--- powerpc-utils-1.3.10/man/update_flash_nv.8.than	2023-11-27 22:05:20.283979110 +0100
++++ powerpc-utils-1.3.10/man/update_flash_nv.8	2023-11-27 22:05:20.283979110 +0100
 @@ -0,0 +1,15 @@
 +.\"
 +.\" Copyright (C) 2015 International Business Machines
@@ -327,25 +347,3 @@ diff -up powerpc-utils-1.3.5/man/update_flash_nv.8.me powerpc-utils-1.3.5/man/up
 +.SH SEE ALSO
 +update_flash(8).
 +
-diff -up powerpc-utils-1.3.10/Makefile.am.me powerpc-utils-1.3.10/Makefile.am
---- powerpc-utils-1.3.10/Makefile.am.me	2022-06-03 12:35:01.335312481 +0200
-+++ powerpc-utils-1.3.10/Makefile.am	2022-06-03 12:46:42.460763120 +0200
-@@ -48,7 +48,17 @@ man_MANS = \
- 	man/vcpustat.8 \
- 	man/rtas_dbg.8 \
- 	man/drmgr.8 \
--	man/lparnumascore.8
-+	man/lparnumascore.8 \
-+	man/lsdevinfo.8 \
-+	man/rtas_event_decode.8 \
-+	man/ls-vdev.8 \
-+	man/lsprop.8 \
-+	man/ls-veth.8 \
-+	man/nvsetenv.8 \
-+	man/ls-vscsi.8 \
-+	man/pseries_platform.8 \
-+	man/update_flash_nv.8 \
-+	man/hcnmgr.8
- 
- EXTRA_DIST += $(bin_SCRIPTS) $(sbin_SCRIPTS) $(man_MANS)
- 

SOURCES/powerpc-utils-1.3.10-nvram-manpage.patch

@@ -0,0 +1,47 @@
+commit d604cc779741c29cbdc8da97cbfc1512fd21fc1b
+Author: Likhitha Korrapati <likhitha@linux.ibm.com>
+Date:   Fri Aug 11 00:41:14 2023 -0500
+
+    nvram man page and --help output are not in sync
+    
+    The nvram man page and the output from --help option are not in
+    sync and few of the options are missing in man page.
+    
+    The options that are missing are ascii, dump, nvram-size, zero.
+    These options are added through the commit ids [1], [2].
+    
+    This patch adds the above missing options to the nvram.
+    
+    [1] https://github.com/ibm-power-utilities/powerpc-utils/commit/0e09f4e2898e7dea556479b018a7f4bf12108099
+    [2] https://github.com/ibm-power-utilities/powerpc-utils/commit/976dbe9bb7b01b135cac3e7bbd1dce0cdc88636a
+    
+    Signed-off-by: Likhitha Korrapati <likhitha@linux.ibm.com>
+    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
+
+diff --git a/man/nvram.8 b/man/nvram.8
+index 2938e34..6071712 100644
+--- a/man/nvram.8
++++ b/man/nvram.8
+@@ -67,6 +67,22 @@ be more verbose.
+ \fB\--help
+ print usage information including other low level options useful for
+ debugging nvram.
++.TP
++\fB\--ascii \fIname
++print partition contents as ASCII text
++.TP
++\fB\--dump \fIname
++raw dump of partition (use --partitions to see names)
++.TP
++\fB\--nvram-size
++specify size of nvram data, must in multiples of 16 Bytes (for repair 
++operations)
++.TP
++\fB\--unzip \fIname
++decompress and print compressed data from partition
++.TP
++\fB\--zero | 0 \fR
++terminate config pairs with a NULL character
+ .SH FILES
+ /dev/nvram
+ .SH AUTHOR

SOURCES/powerpc-utils-1.3.10-nvram-print-config-crash.patch

@@ -0,0 +1,47 @@
+commit 3f72b8326a2fc9a9dffb4b31d0ce3abf12e24751
+Author: Likhitha Korrapati <likhitha@linux.ibm.com>
+Date:   Thu Jan 25 15:44:02 2024 +0530
+
+    powerpc/nvram: fix segmentation fault issue in print-config
+    
+    print-config option in nvram results in segmentation fault when the
+    user provides a very large value.
+    
+    without the patch:
+    [root@xxx powerpc-utils]# nvram --print-config=real-mode?
+    true
+    [root@xxx powerpc-utils]# nvram --print-config=$(perl -e 'p
+    rint "A"x1000000')
+    Segmentation fault (core dumped)
+    
+    The Segmentation fault occurs because the code tries to access memory
+    beyond the bounds of the data at index varlen. varlen is the length of
+    the string provided by the user.
+    
+    This patch adds a condition to check whether the length of the data is
+    greater than varlen to prevent accessing out of bounds.
+    
+    with the patch:
+    [root@xxx powerpc-utils]# ./src/nvram --print-config=real-m
+    ode?
+    true
+    [root@xxx powerpc-utils]# ./src/nvram --print-config=$(perl
+     -e 'print "A"x1000000')
+    
+    Reported-by: Shirisha Ganta <shirisha@linux.ibm.com>
+    Signed-off-by: Likhitha Korrapati <likhitha@linux.ibm.com>
+    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
+
+diff --git a/src/nvram.c b/src/nvram.c
+index f051e9c..095e747 100644
+--- a/src/nvram.c
++++ b/src/nvram.c
+@@ -1280,7 +1280,7 @@ print_of_config(struct nvram *nvram, char *config_var, char *pname,
+ 
+ 	data = (char *)phead + sizeof(*phead);
+ 	while (*data != '\0') {
+-	    if ((data[varlen] == '=') && 
++	    if (strlen(data) > varlen && (data[varlen] == '=') &&
+ 		strncmp(config_var, data, varlen) == 0) {
+ 		printf("%s%c", data + varlen + 1, terminator);
+ 		rc = 0;

SOURCES/powerpc-utils-1.3.10-nvram-size-crash.patch

@@ -0,0 +1,51 @@
+commit a6d31caf4eaa453d3ec879f02163b3a515789b85
+Author: Likhitha Korrapati <likhitha@linux.ibm.com>
+Date:   Mon Sep 11 05:23:37 2023 -0500
+
+    powerpc/nvram: Fix Segmentation fault issue in nvram-size.
+    
+    nvram-size option results in segmentation fault when the user
+    specifies value larger than the default nvram size
+    
+    Without the patch:
+    [root@xxx ~]# nvram --nvram-size 1048592
+    nvram: WARNING: expected 1048592 bytes, but only read 15360!
+    Segmentation fault (core dumped)
+    
+    Segmentation fault is caused because the phead->length is becoming 0.
+    And because of this the p_start doesn't get updated which makes the
+    while loop run infinitely resulting in segmentation fault.
+    This patch adds a condition check for phead->length to avoid infinite
+    while loop.
+    
+    With the patch:
+    [root@xxx src]# ./nvram --nvram-size 1048592
+    ./nvram: WARNING: expected 1048592 bytes, but only read 15360!
+    [root@xxx src]# ./nvram --nvram-size 268435456
+    ./nvram: WARNING: expected 268435456 bytes, but only read 15360!
+    [root@xxx src]#
+    
+    Reported-by: Shirisha Ganta <shirisha@linux.ibm.com>
+    Signed-off-by: Likhitha Korrapati <likhitha@linux.ibm.com>
+    [tyreld: fixed up else block]
+    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
+
+diff --git a/src/nvram.c b/src/nvram.c
+index 095e747..1987c3d 100644
+--- a/src/nvram.c
++++ b/src/nvram.c
+@@ -460,8 +460,12 @@ nvram_parse_partitions(struct nvram *nvram)
+ 	c_sum = checksum(phead);
+ 	if (c_sum != phead->checksum)
+ 	    warn_msg("this partition checksum should be %02x!\n", c_sum);
+-	phead->length = be16toh(phead->length);
+-	p_start += phead->length * NVRAM_BLOCK_SIZE;
++	if (phead->length != 0) {
++		phead->length = be16toh(phead->length);
++		p_start += phead->length * NVRAM_BLOCK_SIZE;
++	} else {
++		break;
++	}
+     }
+ 
+     if (verbose)

SOURCES/powerpc-utils-1ac96f8ab7c27095be90eb2e69ae57e8b43eccbe.patch

@@ -0,0 +1,34 @@
+commit 1ac96f8ab7c27095be90eb2e69ae57e8b43eccbe
+Author: Laurent Dufour <ldufour@linux.ibm.com>
+Date:   Fri Sep 16 18:39:13 2022 +0200
+
+    drmgr/pmig: remove deprecated call to refrsrc IBM.ManagementServer
+    
+    As Nathan reported while reviewing this series:
+    
+    This RSCT doc indicates that the IBM.ManagementServer resource class has
+    been superseded:
+    
+    https://www.ibm.com/docs/en/rsct/3.2?topic=security-management-domain-configuration
+    
+    Removing that deprecated call in this series because it is conflicting with
+    a following patch. The system returned value is stored in rc to prevent
+    compilation error (due to warning if system returned value is not read).
+    
+    Suggested-by: Nathan Lynch <nathanl@linux.ibm.com>
+    Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
+    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
+
+diff --git a/src/drmgr/drmig_chrp_pmig.c b/src/drmgr/drmig_chrp_pmig.c
+index 94cb49a..f78ff15 100644
+--- a/src/drmgr/drmig_chrp_pmig.c
++++ b/src/drmgr/drmig_chrp_pmig.c
+@@ -753,8 +753,5 @@ int drmig_chrp_pmig(void)
+ 
+ 	post_mobility_update();
+ 
+-	say(DEBUG, "Refreshing RMC via refrsrc\n");
+-	rc = system("/usr/sbin/rsct/bin/refrsrc IBM.ManagementServer");
+-
+ 	return 0;
+ }

SOURCES/powerpc-utils-2fbd7c-add_NVMf-FC_boot_support_part2.patch

@@ -0,0 +1,110 @@
+commit 2fbd7c1ff428e534d80f60e03501d625ab594eca
+Author: Wen Xiong <wenxiong@linux.ibm.com>
+Date:   Wed Jun 15 13:05:51 2022 -0500
+
+    ofpathname: Fix several issues in nvmf boot/install support
+    
+    This patch fixes several issues in boot/install over nvme-over-fc
+    device support.
+    
+    - change cntlid to ffff
+    - add devnisd from sysfs
+    - add subsysnqn
+    
+    Signed-off-by: Wen Xiong <wenxiong@linux.ibm.com>
+    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
+
+diff --git a/scripts/ofpathname b/scripts/ofpathname
+index b1d6b09..33d7702 100755
+--- a/scripts/ofpathname
++++ b/scripts/ofpathname
+@@ -773,8 +773,7 @@ l2of_nvmf()
+             t_wwpn="${t_wwpn#0x}"
+             t_wwpn="${t_wwpn%,*}"
+             nqn=`$CAT $PWD/subsysnqn`
+-            cntlid_dec=`$CAT $PWD/cntlid`
+-            cntlid=`echo "obase=16; $cntlid_dec" |bc`
++            cntlid=`echo ffff`
+             if [[ -n $h_wwpn ]]; then
+                 for f in `$FIND /sys/devices -name "port_name"`; do
+                     sys_wwpn=`$CAT $f 2>/dev/null`
+@@ -808,6 +807,9 @@ l2of_nvmf()
+         if [[ ${#res} = 0 ]]; then
+             OF_PATH=""
+         else
++            goto_dir $res
++            devnsid=`$CAT $PWD/nsid | tr -d '\000'`
++            devnsid=`echo "obase=16; $devnsid" |bc`
+             OF_PATH="$OF_PATH/namespace@$devnsid"
+         fi
+     fi
+@@ -818,6 +820,8 @@ l2of_nvmf()
+         if [[ ${#res} = 0 ]]; then
+             OF_PATH=""
+         else
++            goto_dir $res
++            devpart=`$CAT $PWD/partition | tr -d '\000'`
+             OF_PATH="${OF_PATH}:${devpart}"
+         fi
+     fi
+@@ -1826,8 +1830,7 @@ of2l_nvmf()
+     ctrl_name=`echo $DEVNAME | cut -d "/" -f 5`
+     OF_WWPN=${ctrl_name%,*}
+     OF_WWPN=${OF_WWPN#*@}
+-    of_cntlid=${ctrl_name%%:*}
+-    of_cntlid=${of_cntlid#*,}
++    OF_NQN=`echo $ctrl_name | cut -d "=" -f 2`
+     # set partition number only if ':' is present
+     case "${nsid_part}" in
+     *:*)
+@@ -1835,6 +1838,7 @@ of2l_nvmf()
+         ;;
+     esac
+     local dir
++    local found=0
+ 
+     for dir in `$FIND /sys/devices/virtual/nvme-fabrics -name "nvme[0-9]*"`; do
+         cd $dir
+@@ -1844,10 +1848,9 @@ of2l_nvmf()
+             t_wwpn="${t_wwpn%,*}"
+             h_wwpn=`$CAT $PWD/address | cut  -f 5 -d "-"`
+             h_wwpn="${h_wwpn#0x}"
+-            cntlid_dec=`$CAT $PWD/cntlid 2>/dev/null`
+-            cntlid=`echo "obase=16; $cntlid_dec" |bc`
++            nqn=`$CAT $PWD/subsysnqn`
+             if [[ $t_wwpn = $OF_WWPN ]] && \
+-                [[ $cntlid == $of_cntlid ]]; then
++                [[ $nqn == $OF_NQN ]]; then
+                 for f in `$FIND /sys/devices -name "port_name"`; do
+                     sys_wwpn=`$CAT $f 2>/dev/null`
+                     sys_wwpn="${sys_wwpn#0x}"
+@@ -1871,14 +1874,23 @@ of2l_nvmf()
+             fi
+         fi
+     done
++
+     if [[ -n $LOGICAL_DEVNAME ]] && \
+        [[ -n $nsid ]]; then
+-        res=`$FIND /sys/devices/virtual -name ${LOGICAL_DEVNAME}n${nsid}`
+-        if [[ ${#res} = 0 ]]; then
+-            LOGICAL_DEVNAME=''
+-        else
+-            LOGICAL_DEVNAME="${LOGICAL_DEVNAME}n${nsid}"
+-        fi
++        for dir in `$FIND /sys/block -name "${LOGICAL_DEVNAME}n[0-9]*"`; do
++            cd $dir
++
++            local devnsid=`$CAT ./nsid 2>/dev/null`
++            devnsid=`echo "obase=16; $devnsid" |bc`
++            if [[ $devnsid = $nsid ]]; then
++                found=1
++                LOGICAL_DEVNAME="${dir##*/}"
++                break
++            fi
++        done
++    	 if [[ $found -eq 0 ]]; then
++            LOGICAL_DEVNAME=""
++         fi
+     fi
+ 
+     if [[ -n $LOGICAL_DEVNAME ]] && \

SOURCES/powerpc-utils-372599ed28d65a79d4c3b3405a8e04034eb58e09.patch

@@ -0,0 +1,79 @@
+commit 372599ed28d65a79d4c3b3405a8e04034eb58e09
+Author: Laurent Dufour <ldufour@linux.ibm.com>
+Date:   Fri Sep 16 18:39:15 2022 +0200
+
+    drmgr: introduce a DRC type name table
+    
+    So that there is only one place to convert the name of the drc to the type
+    of drc and vice versa.
+    
+    Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
+    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
+
+diff --git a/src/drmgr/common.c b/src/drmgr/common.c
+index 622cfaf..12af756 100644
+--- a/src/drmgr/common.c
++++ b/src/drmgr/common.c
+@@ -52,6 +52,21 @@ char *remove_slot_fname = REMOVE_SLOT_FNAME;
+ static int dr_lock_fd = 0;
+ static long dr_timeout;
+ 
++#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
++
++static char *drc_type_str[] = {
++	[DRC_TYPE_NONE]		= "unknwon",
++	[DRC_TYPE_PCI]		= "pci",
++	[DRC_TYPE_SLOT]		= "slot",
++	[DRC_TYPE_PHB]		= "phb",
++	[DRC_TYPE_CPU]		= "cpu",
++	[DRC_TYPE_MEM]		= "mem",
++	[DRC_TYPE_PORT]		= "port",
++	[DRC_TYPE_HIBERNATE]	= "phib",
++	[DRC_TYPE_MIGRATION]	= "pmig",
++	[DRC_TYPE_ACC]		= "acc",
++};
++
+ /**
+  * set_output level
+  * @brief Common routine to set the output level
+@@ -1521,35 +1536,12 @@ int do_kernel_dlpar_common(const char *cmd, int cmdlen, int silent_error)
+ 
+ enum drc_type to_drc_type(const char *arg)
+ {
+-	if (!strncmp(arg, "pci", 3))
+-		return DRC_TYPE_PCI;
+-
+-	if (!strncmp(arg, "slot", 4))
+-		return DRC_TYPE_SLOT;
+-
+-	if (!strncmp(arg, "phb", 3))
+-		return DRC_TYPE_PHB;
+-
+-	if (!strncmp(arg, "cpu", 3))
+-		return DRC_TYPE_CPU;
+-
+-	if (!strncmp(arg, "mem", 3))
+-		return DRC_TYPE_MEM;
++	enum drc_type i;
+ 
+-	if (!strncmp(arg, "port", 4))
+-		return DRC_TYPE_PORT;
+-
+-	if (!strncmp(arg, "phib", 4))
+-		return DRC_TYPE_HIBERNATE;
+-
+-	if (!strncmp(arg, "pmig", 4))
+-		return DRC_TYPE_MIGRATION;
+-
+-	/*
+-	 * Accelerator
+-	 */
+-	if (!strncmp(arg, "acc", 3))
+-		return DRC_TYPE_ACC;
++	for (i = DRC_TYPE_NONE + 1; i < ARRAY_SIZE(drc_type_str); i++) {
++		if (!strcmp(arg, drc_type_str[i]))
++			return i;
++	}
+ 
+ 	return DRC_TYPE_NONE;
+ }

SOURCES/powerpc-utils-73ba26-lparstat-fix_negative_values.patch

@@ -0,0 +1,36 @@
+diff --git a/src/lparstat.c b/src/lparstat.c
+index 31a4ee8..eebba1f 100644
+--- a/src/lparstat.c
++++ b/src/lparstat.c
+@@ -492,6 +492,15 @@ void get_cpu_util_purr(struct sysentry *unused_se, char *buf)
+ 	delta_purr = get_delta_value("purr");
+ 	delta_idle_purr = get_delta_value("idle_purr");
+ 
++	/*
++	 * Given that these values are read from different
++	 * sources (purr from lparcfg and idle_purr from sysfs),
++	 * a small variation in the values is possible.
++	 * In such cases, round down delta_idle_purr to delta_purr.
++	 */
++	if (delta_idle_purr > delta_purr)
++		delta_idle_purr = delta_purr;
++
+ 	physc = (delta_purr - delta_idle_purr) / delta_tb;
+ 	physc *= 100.00;
+ 
+@@ -507,6 +516,15 @@ void get_cpu_idle_purr(struct sysentry *unused_se, char *buf)
+ 	delta_purr = get_delta_value("purr");
+ 	delta_idle_purr = get_delta_value("idle_purr");
+ 
++	/*
++	 * Given that these values are read from different
++	 * sources (purr from lparcfg and idle_purr from sysfs),
++	 * a small variation in the values is possible.
++	 * In such cases, round down delta_idle_purr to delta_purr.
++	 */
++	if (delta_idle_purr > delta_purr)
++		delta_idle_purr = delta_purr;
++
+ 	physc = (delta_purr - delta_idle_purr) / delta_tb;
+ 	idle = (delta_purr / delta_tb) - physc;
+ 	idle *= 100.00;

SOURCES/powerpc-utils-7698adc945372e901c2bc3f7066a5a1c219bf1d8.patch

@@ -0,0 +1,120 @@
+commit 7698adc945372e901c2bc3f7066a5a1c219bf1d8
+Author: Laurent Dufour <ldufour@linux.ibm.com>
+Date:   Fri Sep 16 18:39:18 2022 +0200
+
+    drmgr: add the drmgr-hooks man file.
+    
+    This man page describe the various drmgr's hooks.
+    
+    Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
+    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
+
+diff --git a/Makefile.am b/Makefile.am
+index ba7a3c5..5c0ca3c 100644
+--- a/Makefile.am
++++ b/Makefile.am
+@@ -48,6 +48,7 @@ man_MANS = \
+ 	man/vcpustat.8 \
+ 	man/rtas_dbg.8 \
+ 	man/drmgr.8 \
++	man/drmgr-hooks.8 \
+ 	man/lparnumascore.8
+ 
+ EXTRA_DIST += $(bin_SCRIPTS) $(sbin_SCRIPTS) $(man_MANS)
+diff --git a/man/drmgr-hooks.8 b/man/drmgr-hooks.8
+new file mode 100644
+index 0000000..621e4f0
+--- /dev/null
++++ b/man/drmgr-hooks.8
+@@ -0,0 +1,82 @@
++.\"
++.\" Copyright (C) 2022 International Business Machines
++.\"
++.TH DRMGR-HOOKS 8 "May 24, 2022" Linux "Linux on Power Service Tools"
++.SH NAME
++drmgr\-hooks \- Hooks run by drmgr
++.SH DESCRIPTION
++When
++.B drmgr
++is run to perform PowerVM Dynamic Logical Partitioning (DLPAR) operations,
++a set of hooks may be triggered to validate, and, or be aware of the incoming operation.
++.P
++Not all the DLPAR operations are providing hook calls.
++Currently only the LPAR Migration operation (LPM) is concerned.
++.P
++The hooks are executable files stored in a directory named "DRC TYPE" in
++.IR /etc/drmgr.d/ .
++For instance, hooks run when a LPAR migration is done are stored in
++.IR /etc/drmgr.d/pmig .
++.P
++Hook files can be symbolic links to executable files. All the hooks can be stored in
++.IR /etc/drmgr.d
++and linked into multiple directories to provide multiple DRC type's hooks.
++.SH ARGUMENTS
++.P
++Hooks are called without any arguments but with  at least these 2 environment variable set:
++.TP
++.BI "DRC_TYPE"
++The Dynamic reconfiguration connector type to act upon from the following list:
++.BR pmig ", " pci ", " cpu ", " mem ", " port ", " slot ", " phb "."
++.TP
++.BI "PHASE"
++The phase of the operation from the following list:
++.BR check ", " undocheck ", " pre ", " post "."
++.SH LPAR MIGRATION
++.P
++When a LPAR migration is initiated the
++.B check
++phase is first triggered. Hooks called at check phase may returned a non zero value to prevent the migration operation to happen.
++The error messages displayed in
++.BR STDOUT " or " STDERR
++would be reported to the end user through the HMC.
++.P
++If the
++.B check
++phase has failed, because at least one hook has returned a non null value, the
++.B undocheck
++phase is launched. Return value for the
++.B
++undocheck
++phase is ignored.
++.P
++If the
++.B check
++phase succeeded, the
++.BR pre " and later " post
++phases are triggered. Returned values for these 2 phases are ignored, and the
++.B post
++phase is triggered even if the LPM operation has failed.
++.SH ENVIRONMENT
++.P
++The drmgr's hooks are called while holding the DLPAR lock, so any other
++DLPAR operation initiated from a hook is expected to fail.
++.P
++The hooks standard input
++.B STDIN
++is redirected to
++.I /dev/null
++while STDOUT and STDERR are redirected to pipes.
++The outputs done in these pipes are reported to the end user when a hook has returned an error value and that error value is not ignored (e.g in the LPM, the
++.B check
++phase but not the
++.BR pre "or " post
++phase)
++.P
++Except the variables specified in the ARGUMENTS section, all the environment variables are unset before calling the hook.
++.SH FILES
++.IR /etc/drmgr.d/pmig/
++.SH AUTHOR
++Laurent Dufour <ldufour@linux.ibm.com>
++.SH SEE ALSO
++.BR drmgr (8)
+diff --git a/man/drmgr.8 b/man/drmgr.8
+index 09944bd..f40136b 100644
+--- a/man/drmgr.8
++++ b/man/drmgr.8
+@@ -158,3 +158,4 @@ was written by IBM Corporation
+ 
+ .SH SEE ALSO
+ .BR lsslot "(8)"
++.BR drmgr-hooks "(8)"

SOURCES/powerpc-utils-8a7aa61c5f520df03e53e6f7e1d63b7d5c432376.patch

@@ -0,0 +1,33 @@
+commit 8a7aa61c5f520df03e53e6f7e1d63b7d5c432376
+Author: Wen Xiong <wenxiong@linux.ibm.com>
+Date:   Wed Nov 15 14:37:43 2023 -0600
+
+    powerpc-utils/scripts/ofpathname: handle nsid of nvme device as hex number
+    
+    Installation fails if nsid of nvme device is greater than 10.
+    
+    The patch fixes the issue and handle nsid of nvme ad a hex number.
+    
+    Signed-off-by: Wen Xiong <wenxiong@linux.ibm.com>
+    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
+
+diff --git a/scripts/ofpathname b/scripts/ofpathname
+index 3abe4d1..833d03f 100755
+--- a/scripts/ofpathname
++++ b/scripts/ofpathname
+@@ -722,6 +722,7 @@ l2of_nvme()
+         err $ERR_NO_OFPATH
+     fi
+ 
++    devnsid=$(printf "%x" $devnsid)
+     OF_PATH="$OF_PATH/$devtype@$devnsid"
+ 
+     # No partition (pZ) specified.
+@@ -1798,6 +1799,7 @@ of2l_nvme()
+ 	    cd $dir
+ 
+ 	    local devnsid=`$CAT ./nsid 2>/dev/null`
++	    devnsid=$(printf "%x" $devnsid)
+ 	    if [[ $devnsid = $nsid ]]; then
+ 		    LOGICAL_DEVNAME="${dir##*/}"
+ 		    break

SOURCES/powerpc-utils-c01580-add_NVMf-FC_boot_support_part1.patch

@@ -0,0 +1,131 @@
+commit c015807d5bef0ebdeaf99883793173f2b636e740
+Author: Wen Xiong <wenxiong@linux.ibm.com>
+Date:   Wed Jun 15 13:05:18 2022 -0500
+
+    bootlist: Add install/boot support for nvmf devices
+    
+    This patch adds the boot/installation support for nvme-over-fc devices.
+    It can set nvmf device as boot device in both of logical device name
+    and open firmware device path name.
+    
+    Signed-off-by: Wen Xiong <wenxiong@linux.ibm.com>
+    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
+
+diff --git a/scripts/bootlist b/scripts/bootlist
+index b5cfbd9..1929f65 100755
+--- a/scripts/bootlist
++++ b/scripts/bootlist
+@@ -22,6 +22,7 @@
+ 
+ OFPATHNAME=/usr/sbin/ofpathname
+ NVRAM=/usr/sbin/nvram
++FIND=/usr/bin/find
+ PSERIES_PLATFORM=$(dirname $0)/pseries_platform
+ 
+ #
+@@ -288,6 +289,63 @@ dm_to_part()
+         done
+ }
+ 
++# is_nvmf_device
++# Check to see if this is a nvmf device
++#
++is_nvmf_device()
++{
++	local res
++
++	res=`$FIND /sys/devices/virtual/nvme-fabrics -name $1 2>/dev/null`
++	if [[ ${#res} = 0 ]]; then
++		echo "no"
++	else
++		echo "yes"
++	fi
++}
++
++# get_link
++# return the directory path that a link points to.
++# The only parameter is the link name.
++#
++get_link()
++{
++	local ln_name=$1;
++
++	echo `ls -l $ln_name 2>/dev/null | awk -F"->" '{print $2}'`
++}
++
++add_nvmf()
++{
++	local DEVNAME=$1
++
++	ctrl_name=$DEVNAME
++	local startctr=$ctr
++
++	local dir
++	for dir in `$FIND /sys/devices/virtual/nvme-fabrics -name "$ctrl_name"`; do
++		cd $dir
++		link=`get_link "device"`
++		cd $link
++		for slave in $PWD/*; do
++			slavedev=${slave##*/}
++			if [[ "$slavedev" == nvme[0-9]* ]] ; then
++				cd $slave
++				res=`$FIND . -name "${ctrl_name}*"`
++				if [[ ${#res} != 0 ]]; then
++					LOGICAL_NAMES[$ctr]=${slavedev}
++					ctr=$[$ctr + 1]
++				fi
++			fi
++		done
++	done
++
++	if [[ "$startctr" = "$ctr" ]] ; then
++		LOGICAL_NAMES[$ctr]=$1
++		ctr=$[$ctr + 1]
++	fi
++}
++
+ add_logical()
+ {
+     local DEVNAME=$1
+@@ -432,7 +490,30 @@ while [[ -n $1 ]]; do
+ 	exit -1
+     else
+         # add this element to the array
+-	add_logical $1
++        if [[ "$1" == *"dm-"* ]] ; then
++            add_logical $1
++        else
++            if [[ "$1" == *"nvme-of"* ]]; then
++                ctrl_name=`get_logical_device_name $1`
++            else
++            	ctrl_name=$1
++            	ctrl_name=${ctrl_name##*/}
++            fi
++            ctrl_name="${ctrl_name%n[0-9]*}"
++            is_nvmf=$(is_nvmf_device $ctrl_name)
++            if [[ $is_nvmf = "yes" ]]; then
++		if [[ "$1" == *"nvme-of"* ]]; then
++			master_of_path=$1
++		else
++			master_of_path=`get_of_device_name $1`
++		fi
++                namespace_base=${master_of_path##*/}
++                DEVTYPE="nvme-of"
++                add_nvmf $ctrl_name
++            else
++                add_logical $1
++            fi
++        fi
+     fi
+ 
+     shift
+@@ -453,6 +534,9 @@ if [[ ${#LOGICAL_NAMES[*]} -ne 0 ]]; then
+         if [[ -z ${OF_DEVPATH[$ctr]} ]]; then
+ 	    # See if this is an OF pathname
+ 	    OF_DEVPATH[$ctr]=`get_of_device_name ${LOGICAL_NAMES[$ctr]}`
++	    if [[ $DEVTYPE = "nvme-of" ]]; then
++		    OF_DEVPATH[$ctr]=${OF_DEVPATH[$ctr]}/$namespace_base
++	    fi
+ 	else
+ 	    OF_DEVPATH[$ctr]=${LOGICAL_NAMES[$ctr]}
+         fi

SOURCES/powerpc-utils-c3ce3040ea9ed49345756136d61eb402e32402e8.patch

@@ -0,0 +1,36 @@
+commit c3ce3040ea9ed49345756136d61eb402e32402e8
+Author: Laurent Dufour <ldufour@linux.ibm.com>
+Date:   Fri Sep 16 18:39:12 2022 +0200
+
+    drmgr/pmig: remove unused code
+    
+    The original system id is read but never used, so remove that useless code.
+    Remove also an unjustified sleep(5) call.
+    
+    Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
+    Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
+    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
+
+diff --git a/src/drmgr/drmig_chrp_pmig.c b/src/drmgr/drmig_chrp_pmig.c
+index 569eeb6..94cb49a 100644
+--- a/src/drmgr/drmig_chrp_pmig.c
++++ b/src/drmgr/drmig_chrp_pmig.c
+@@ -695,7 +695,6 @@ void post_mobility_update(void)
+ int drmig_chrp_pmig(void)
+ {
+ 	int rc;
+-	char sys_src[20];
+ 	uint64_t stream_val;
+ 
+ 	/* Ensure that this partition is migratable/mobile */
+@@ -732,10 +731,6 @@ int drmig_chrp_pmig(void)
+ 		say(ERROR, "Invalid streamid specified: %s\n", strerror(errno));
+ 		return -1;
+ 	}
+-	
+-	/* Get the ID of the original system, for later logging */
+-	get_str_attribute(OFDT_BASE, "system-id", sys_src, 20);
+-	sleep(5);
+ 
+ 	/* Now do the actual migration */
+ 	do {

SOURCES/powerpc-utils-d0bc79aedaf76eff09a5d1f399da09561a4d4d7d.patch

@@ -0,0 +1,93 @@
+commit d0bc79aedaf76eff09a5d1f399da09561a4d4d7d
+Author: Laurent Dufour <ldufour@linux.ibm.com>
+Date:   Fri Sep 16 18:39:17 2022 +0200
+
+    drmgr: introducing the LPM hooks
+    
+    There are 3 hooks run when an LPM is performed:
+    1. check before the LPM is really initiated
+     1 bis. undocheck if check failed.
+    2. pre just before entering the switch over
+    3. post at the end of the LPM operation
+    
+    Only the check hook's return status is taken in account. If the check hook
+    return value is different from 0, the LPM is aborted and the outputs of the
+    check hook are reported to the end user through the HMC.
+    
+    In the case at least one check hook returned a non zero status, the
+    undocheck event is run (for all the hooks), and the pre and post events are
+    not triggered.
+    
+    The post event is triggered even if the LPM operation has failed.
+    
+    Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
+    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
+
+diff --git a/src/drmgr/drmig_chrp_pmig.c b/src/drmgr/drmig_chrp_pmig.c
+index f78ff15..f169fa5 100644
+--- a/src/drmgr/drmig_chrp_pmig.c
++++ b/src/drmgr/drmig_chrp_pmig.c
+@@ -691,11 +691,15 @@ void post_mobility_update(void)
+ 		devtree_update();
+ 	}
+ }
+-	
++
+ int drmig_chrp_pmig(void)
+ {
+ 	int rc;
+ 	uint64_t stream_val;
++	enum drc_type drc_type = DRC_TYPE_NONE;
++
++	if (usr_action == MIGRATE)
++		drc_type = DRC_TYPE_MIGRATION;
+ 
+ 	/* Ensure that this partition is migratable/mobile */
+ 	if (! pmig_capable()) {
+@@ -704,14 +708,11 @@ int drmig_chrp_pmig(void)
+ 		return -1;
+ 	}
+ 
+-	/* Today we do no pre-checks for migratability. The only check
+-	 * we could do is whether the "ibm,suspend-me" RTAS call exists.
+-	 * But if it doesn't, the firmware level doesn't support migration,
+-	 * in which case why the heck are we being invoked anyways.
+-	 */
+-	if (strcmp(usr_p_option, "check") == 0) {
+-		say(DEBUG, "check: Nothing to do...\n");
+-		return 0;
++	if (usr_action == MIGRATE && (strcmp(usr_p_option, "check") == 0)) {
++		rc = run_hooks(drc_type, HOOK_CHECK);
++		if (rc)
++			run_hooks(drc_type, HOOK_UNDOCHECK);
++		return rc;
+ 	}
+ 
+ 	/* The only other command is pre, any other command is invalid */
+@@ -734,6 +735,9 @@ int drmig_chrp_pmig(void)
+ 
+ 	/* Now do the actual migration */
+ 	do {
++		if (usr_action == MIGRATE)
++			run_hooks(drc_type, HOOK_PRE);
++
+ 		if (usr_action == MIGRATE)
+ 			rc = do_migration(stream_val);
+ 		else if (usr_action == HIBERNATE)
+@@ -748,10 +752,12 @@ int drmig_chrp_pmig(void)
+ 
+ 	syslog(LOG_LOCAL0 | LOG_INFO, "drmgr: %s rc %d\n",
+ 	       (usr_action == MIGRATE ? "migration" : "hibernation"), rc);
+-	if (rc)
+-		return rc;
+ 
+-	post_mobility_update();
++	if (!rc)
++		post_mobility_update();
+ 
+-	return 0;
++	/* Post hook is called even if the migration has failed */
++	if (usr_action == MIGRATE)
++		run_hooks(drc_type, HOOK_POST);
++	return rc;
+ }

SOURCES/powerpc-utils-e0928dc5e5375591a4cff6ffabc6063771288f59.patch

@@ -0,0 +1,219 @@
+commit e0928dc5e5375591a4cff6ffabc6063771288f59
+Author: Laurent Dufour <ldufour@linux.ibm.com>
+Date:   Fri Sep 16 18:39:16 2022 +0200
+
+    drmgr: introducing the hook framework
+    
+    The hook framework run in a sequence any executable file found in the
+    relevant directory (/etc/drmgr.d/<DRC TYPE NAME>/)
+    
+    The hook are run according to the versionsort()'s output order.
+    
+    The hook inherits from drmgr its standard I/O streams. All others file
+    descriptor should have the close on exec flag set to ensure they will be
+    closed when executing an hook.
+    
+    The hooks are run with no arguments, arguments are passed through
+    environment variable.
+    
+    The inherited environment is cleaned and 2 environment variables
+    are set:
+    - DRC_TYPE containing the DRC type string
+    - PHASE containing the current phase
+    
+    There are 4 known phases: check, undocheck, pre and post.
+    
+    The hook's run is recorded in the drmgr's log, so blocking hook could be
+    identified.
+    
+    Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
+    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
+
+diff --git a/src/drmgr/common.c b/src/drmgr/common.c
+index 12af756..9cd91d1 100644
+--- a/src/drmgr/common.c
++++ b/src/drmgr/common.c
+@@ -49,6 +49,8 @@ char *remove_slot_fname = REMOVE_SLOT_FNAME;
+ 
+ #define SYSFS_DLPAR_FILE	"/sys/kernel/dlpar"
+ 
++#define DR_SCRIPT_DIR	"/etc/drmgr.d"
++
+ static int dr_lock_fd = 0;
+ static long dr_timeout;
+ 
+@@ -67,6 +69,13 @@ static char *drc_type_str[] = {
+ 	[DRC_TYPE_ACC]		= "acc",
+ };
+ 
++static char *hook_phase_name[] = {
++	[HOOK_CHECK]		= "check",
++	[HOOK_UNDOCHECK]	= "undocheck",
++	[HOOK_PRE]		= "pre",
++	[HOOK_POST]		= "post",
++};
++
+ /**
+  * set_output level
+  * @brief Common routine to set the output level
+@@ -1546,3 +1555,138 @@ enum drc_type to_drc_type(const char *arg)
+ 	return DRC_TYPE_NONE;
+ }
+ 
++static int run_one_hook(enum drc_type drc_type,	enum hook_phase phase,
++			const char *name)
++{
++	int rc;
++	pid_t child;
++
++	fflush(NULL);
++	child = fork();
++	if (child == -1) {
++		say(ERROR, "Can't fork to run a hook: %s\n", strerror(errno));
++		return -1;
++	}
++
++	if (child) {
++		/* Father side */
++		while (waitpid(child, &rc, 0) == -1) {
++			if (errno == EINTR)
++				continue;
++			say(ERROR, "waitpid error: %s\n", strerror(errno));
++			return -1;
++		}
++
++		if (WIFSIGNALED(rc)) {
++			say(INFO, "hook '%s' terminated by signal %d\n",
++			    name, WTERMSIG(rc));
++			rc = 1;
++		} else {
++			rc = WEXITSTATUS(rc);
++			say(INFO, "hook '%s' exited with status %d\n",
++			    name, rc);
++		}
++		return rc;
++	}
++
++
++	/* Child side */
++	say(DEBUG, "Running hook '%s' for phase %s (PID=%d)\n",
++	    name, hook_phase_name[phase], getpid());
++
++	if (chdir("/")) {
++		say(ERROR, "Can't change working directory to / : %s\n",
++		    strerror(errno));
++		exit(255);
++	}
++
++	if (clearenv() ||
++	    setenv("DRC_TYPE", drc_type_str[drc_type], 1) ||
++	    setenv("PHASE", hook_phase_name[phase], 1)) {
++		say(ERROR, "Can't set environment variables: %s\n",
++		    strerror(errno));
++		exit(255);
++	}
++
++	execl(name, name, (char *)NULL);
++	say(ERROR, "Can't exec hook %s : %s\n", strerror(errno));
++	exit(255);
++}
++
++static int is_file_or_link(const struct dirent *entry)
++{
++	if ((entry->d_type == DT_REG) || (entry->d_type == DT_LNK))
++		return 1;
++	return 0;
++}
++
++/*
++ * Run all executable hooks found in a given directory.
++ * Return 0 if all run script have returned 0 status.
++ */
++int run_hooks(enum drc_type drc_type, enum hook_phase phase)
++{
++	int rc = 0, fdd, num, i;
++	DIR *dir;
++	struct dirent **entries = NULL;
++
++	/* Sanity check */
++	if (drc_type <= DRC_TYPE_NONE || drc_type >= ARRAY_SIZE(drc_type_str)) {
++		say(ERROR, "Invalid DRC TYPE detected (%d)\n", drc_type);
++		return -1;
++	}
++
++	if (phase < HOOK_CHECK || phase > HOOK_POST) {
++		say(ERROR, "Invalid hook phase %d\n", phase);
++		return -1;
++	}
++
++	dir = opendir(DR_SCRIPT_DIR);
++	if (dir == NULL) {
++		if (errno == ENOENT)
++			return 0;
++		say(ERROR, "Can't open %s: %s\n", DR_SCRIPT_DIR,
++		    strerror(errno));
++		return -1;
++	}
++
++	fdd = dirfd(dir);
++	num = scandirat(fdd, drc_type_str[drc_type], &entries,
++			is_file_or_link, versionsort);
++	closedir(dir);
++
++	for (i = 0; i < num; i++) {
++		struct stat st;
++		struct dirent *entry = entries[i];
++		char *name;
++
++		if (asprintf(&name, "%s/%s/%s", DR_SCRIPT_DIR,
++			     drc_type_str[drc_type], entry->d_name) == -1) {
++			say(ERROR,
++			    "Can't allocate filename string (%zd bytes)\n",
++			    strlen(DR_SCRIPT_DIR) + 1 +
++			    strlen(drc_type_str[drc_type]) + 1 +
++			    strlen(entry->d_name) + 1);
++			rc = 1;
++			free(entry);
++			continue;
++		}
++
++		/*
++		 * Report error only in the case the hook itself fails.
++		 * Any other error (file is not executable etc.) is ignored.
++		 */
++		if (stat(name, &st))
++			say(WARN, "Can't stat file %s: %s\n",
++			    name, strerror(errno));
++		else if (S_ISREG(st.st_mode) && (st.st_mode & S_IXUSR) &&
++			 run_one_hook(drc_type, phase, name))
++			rc = 1;
++
++		free(name);
++		free(entry);
++	}
++
++	free(entries);
++	return rc;
++}
+diff --git a/src/drmgr/dr.h b/src/drmgr/dr.h
+index 58fdb5c..5526c29 100644
+--- a/src/drmgr/dr.h
++++ b/src/drmgr/dr.h
+@@ -70,6 +70,8 @@ enum drc_type {DRC_TYPE_NONE, DRC_TYPE_PCI, DRC_TYPE_SLOT, DRC_TYPE_PHB,
+ 	       DRC_TYPE_CPU, DRC_TYPE_MEM, DRC_TYPE_PORT,
+ 	       DRC_TYPE_HIBERNATE, DRC_TYPE_MIGRATION, DRC_TYPE_ACC};
+ 
++enum hook_phase {HOOK_CHECK, HOOK_UNDOCHECK, HOOK_PRE, HOOK_POST};
++
+ extern enum drmgr_action usr_action;
+ extern int display_capabilities;
+ extern int usr_slot_identification;
+@@ -133,6 +135,8 @@ void print_dlpar_capabilities(void);
+ 
+ void set_output_level(int);
+ 
++int run_hooks(enum drc_type drc_type, enum hook_phase phase);
++
+ #define DR_BUF_SZ	256
+ 
+ int drslot_chrp_slot(void);

SOURCES/powerpc-utils-f2a4619ef6be747f53e5f631f8b23b5edb9bb023.patch

@@ -0,0 +1,47 @@
+commit f2a4619ef6be747f53e5f631f8b23b5edb9bb023
+Author: Laurent Dufour <ldufour@linux.ibm.com>
+Date:   Fri Sep 16 18:39:14 2022 +0200
+
+    drmgr: prevent file descriptor to be inherited when execing a child
+    
+    When a file descriptor is opened and remain opened, the O_CLOEXEC should be
+    set so execed children are not inheriting it.
+    
+    There is no need for file descriptor opened and closed immediately, like in
+    probe_cpu().
+    
+    Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
+    Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
+    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
+
+diff --git a/src/drmgr/common.c b/src/drmgr/common.c
+index 393a997..622cfaf 100644
+--- a/src/drmgr/common.c
++++ b/src/drmgr/common.c
+@@ -174,7 +174,7 @@ inline int dr_init(void)
+ 	}
+ 
+ 
+-	log_fd = open(DR_LOG_PATH, O_RDWR | O_CREAT | O_APPEND,
++	log_fd = open(DR_LOG_PATH, O_RDWR | O_CREAT | O_APPEND | O_CLOEXEC,
+ 		      S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
+ 	if (log_fd == -1) {
+ 		log_fd = 0;
+@@ -314,7 +314,7 @@ int dr_lock(void)
+ 	mode_t          old_mode;
+ 
+ 	old_mode = umask(0);
+-	dr_lock_fd = open(DR_LOCK_FILE, O_RDWR | O_CREAT,
++	dr_lock_fd = open(DR_LOCK_FILE, O_RDWR | O_CREAT | O_CLOEXEC,
+ 			  S_IRUSR | S_IRGRP | S_IROTH);
+ 	if (dr_lock_fd < 0)
+ 		return -1;
+@@ -1496,7 +1496,7 @@ int do_kernel_dlpar_common(const char *cmd, int cmdlen, int silent_error)
+ 
+ 	/* write to file */
+ 	if (fd == -1) {
+-		fd = open(SYSFS_DLPAR_FILE, O_WRONLY);
++		fd = open(SYSFS_DLPAR_FILE, O_WRONLY | O_CLOEXEC);
+ 		if (fd < 0) {
+ 			say(ERROR,
+ 			    "Could not open %s to initiate DLPAR request\n",

SOURCES/powerpc-utils-f4c2b0-fix_display_of_mode_for_dedicated_donating_partition.patch

@@ -1,41 +1,3 @@
-commit f4c2b0d142f623e7dd28a5d685e446d41be75601
-Author: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
-Date:   Thu Aug 25 12:19:27 2022 +0530
-
-    lparstat: Fix display of mode for dedicated-donating partition
-    
-     From the lparstat man page:
-      mode
-      Indicates whether the partition processor capacity is capped or uncapped
-      allowing it to consume idle cycles from the shared pool. Dedicated LPAR
-      is capped or donating.
-    
-    However, on a dedicated partition, lparstat always displays the mode as
-    'Capped' today. Fix this by using 'DedDonMode' field from lparcfg for
-    determining the cycle donation status of a dedicated partition.
-    
-    On a dedicated-donating partition:
-      $ grep -e shared -e DedDonMode -e capped /proc/powerpc/lparcfg
-      DedDonMode=1
-      capped=1
-      shared_processor_mode=0
-    
-    Before this patch:
-      $ lparstat
-    
-      System Configuration
-      type=Dedicated mode=Capped smt=8 lcpu=1 mem=3335424 kB cpus=0 ent=1.00
-    
-    After this patch:
-      $ lparstat
-    
-      System Configuration
-      type=Dedicated mode=Donating smt=8 lcpu=1 mem=3335424 kB cpus=0 ent=1.00
-    
-    Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
-    Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
-    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
-
 diff --git a/src/lparstat.c b/src/lparstat.c
 index 0b30fc9..e998e8c 100644
 --- a/src/lparstat.c

SOURCES/powerpc-utils-git04e5c9-handle_nsid_as_hex.patch

@@ -0,0 +1,40 @@
+commit 04e5c9646296e1f12048723bba4cee663c3f74ed
+Author: Wen Xiong <wenxiong@linux.ibm.com>
+Date:   Thu Dec 1 05:22:37 2022 -0600
+
+    ofpathname: Handle nsid as hex in nvmf boot/install support
+    
+    Didn't handle nsid correctly in nvmf boot/install support.
+    Need to handle it as hexadecimal number
+    
+    For example,
+    /pci@800000020000132/fibre-channel@0,1/nvme-of/controller@50050768101935e5,ffff
+    :nqn=nqn.1986-03.com.ibm:nvme:2145.0000020420006CEA/namespace@26c
+    
+    26c should be a hexadecimal number.
+    
+    Signed-off-by: Wen Xiong <wenxiong@linux.ibm.com>
+    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
+
+diff --git a/scripts/ofpathname b/scripts/ofpathname
+index c576fb8..3abe4d1 100755
+--- a/scripts/ofpathname
++++ b/scripts/ofpathname
+@@ -809,7 +809,7 @@ l2of_nvmf()
+         else
+             goto_dir $res
+             devnsid=`$CAT $PWD/nsid | tr -d '\000'`
+-            devnsid=`echo "obase=16; $devnsid" |bc`
++	    devnsid=$(printf "%x" $devnsid)
+             OF_PATH="$OF_PATH/namespace@$devnsid"
+         fi
+     fi
+@@ -1886,7 +1886,7 @@ of2l_nvmf()
+                 for dev_name in `$FIND /sys/block -name "${ana_name##*/}n[0-9]*"`; do
+                     cd $dev_name
+                     local devnsid=`$CAT ./nsid 2>/dev/null`
+-                    devnsid=`echo "obase=16; $devnsid" |bc`
++		    devnsid=$(printf "%x" $devnsid)
+                     if [[ $devnsid = $nsid ]]; then
+                         found=1
+                         NS_ID="${dev_name##*n}"

SOURCES/powerpc-utils-git3847a1-support_multiple_dev_paths_for_a_nvmf_boot_device.patch

@@ -0,0 +1,118 @@
+commit 3847a1c25a640394c4afd2b8938ad21190bf5dbe
+Author: Wen Xiong <wenxiong@linux.ibm.com>
+Date:   Fri Oct 28 09:20:38 2022 -0500
+
+    Support multiple dev paths for a nvmf boot device
+    
+    This patch adds the support for multiple dev/of paths with a nvmf boot dev
+    
+    # bootlist -m normal -o nvme1n4
+    nvme1n4
+    nvme3n4
+    nvme5n4
+    nvme6n4
+    # bootlist -m normal -o
+    nvme1n4
+    nvme3n4
+    nvme5n4
+    nvme6n4
+    # bootlist -m normal -r
+    /pci@800000020000017/fibre-channel@0/nvme-of/controller@50050768101935e5,ffff:nqn=nqn.1986-03.com.ibm:nvme:2145.0000020420006CEA/namespace@147
+    /pci@800000020000017/fibre-channel@0/nvme-of/controller@5005076810193675,ffff:nqn=nqn.1986-03.com.ibm:nvme:2145.0000020420006CEA/namespace@147
+    /pci@800000020000017/fibre-channel@0,1/nvme-of/controller@5005076810193675,ffff:nqn=nqn.1986-03.com.ibm:nvme:2145.0000020420006CEA/namespace@147
+    /pci@800000020000017/fibre-channel@0,1/nvme-of/controller@50050768101935e5,ffff:nqn=nqn.1986-03.com.ibm:nvme:2145.0000020420006CEA/namespace@147
+    
+    Signed-off-by: Wen Xiong <wenxiong@linux.ibm.com>
+    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
+
+diff --git a/scripts/bootlist b/scripts/bootlist
+index 1929f65..cc8718e 100755
+--- a/scripts/bootlist
++++ b/scripts/bootlist
+@@ -327,16 +327,10 @@ add_nvmf()
+ 		cd $dir
+ 		link=`get_link "device"`
+ 		cd $link
+-		for slave in $PWD/*; do
+-			slavedev=${slave##*/}
+-			if [[ "$slavedev" == nvme[0-9]* ]] ; then
+-				cd $slave
+-				res=`$FIND . -name "${ctrl_name}*"`
+-				if [[ ${#res} != 0 ]]; then
+-					LOGICAL_NAMES[$ctr]=${slavedev}
+-					ctr=$[$ctr + 1]
+-				fi
+-			fi
++        for slave in `ls -d $PWD/nvme*`; do
++            slavedev=${slave##*/}
++            LOGICAL_NAMES[$ctr]=${slavedev}
++            ctr=$[$ctr + 1]
+ 		done
+ 	done
+ 
+@@ -502,11 +496,17 @@ while [[ -n $1 ]]; do
+             ctrl_name="${ctrl_name%n[0-9]*}"
+             is_nvmf=$(is_nvmf_device $ctrl_name)
+             if [[ $is_nvmf = "yes" ]]; then
+-		if [[ "$1" == *"nvme-of"* ]]; then
+-			master_of_path=$1
+-		else
+-			master_of_path=`get_of_device_name $1`
+-		fi
++                if [[ "$1" == *"nvme-of"* ]]; then
++                    master_of_path=$1
++                else
++                    master_of_path=`get_of_device_name $1`
++                fi
++
++                if [[ -z $master_of_path ]]; then
++                    echo "Device $1 does not appear to be valid." >&2
++                    exit 1
++                fi
++
+                 namespace_base=${master_of_path##*/}
+                 DEVTYPE="nvme-of"
+                 add_nvmf $ctrl_name
+diff --git a/scripts/ofpathname b/scripts/ofpathname
+index 33d7702..c576fb8 100755
+--- a/scripts/ofpathname
++++ b/scripts/ofpathname
+@@ -1875,19 +1875,28 @@ of2l_nvmf()
+         fi
+     done
+ 
++    local ana_dir
+     if [[ -n $LOGICAL_DEVNAME ]] && \
+        [[ -n $nsid ]]; then
+-        for dir in `$FIND /sys/block -name "${LOGICAL_DEVNAME}n[0-9]*"`; do
+-            cd $dir
+-
+-            local devnsid=`$CAT ./nsid 2>/dev/null`
+-            devnsid=`echo "obase=16; $devnsid" |bc`
+-            if [[ $devnsid = $nsid ]]; then
+-                found=1
+-                LOGICAL_DEVNAME="${dir##*/}"
+-                break
+-            fi
++        for ana_dir in `$FIND /sys/devices/virtual/nvme-fabrics -name "$LOGICAL_DEVNAME"`; do
++            cd $ana_dir
++            link=`get_link "device"`
++            cd $link
++            for ana_name in `ls -d $PWD/nvme*`; do
++                for dev_name in `$FIND /sys/block -name "${ana_name##*/}n[0-9]*"`; do
++                    cd $dev_name
++                    local devnsid=`$CAT ./nsid 2>/dev/null`
++                    devnsid=`echo "obase=16; $devnsid" |bc`
++                    if [[ $devnsid = $nsid ]]; then
++                        found=1
++                        NS_ID="${dev_name##*n}"
++                        LOGICAL_DEVNAME="${LOGICAL_DEVNAME}n${NS_ID}"
++                        break
++                    fi
++                 done
++            done
+         done
++        
+     	 if [[ $found -eq 0 ]]; then
+             LOGICAL_DEVNAME=""
+          fi

SOURCES/powerpc-utils-rtas_dbg_return_negativ_value.patch

@@ -0,0 +1,70 @@
+commit 9caa77e4477a73064a6deea253fd3faea32648fb
+Author: Likhitha Korrapati <likhitha@linux.ibm.com>
+Date:   Fri Nov 17 01:42:29 2023 -0500
+
+    rtas_dbg: Fix the large negative values in rtas_dbg
+    
+    without the patch:
+    [root@xxx powerpc-utils]# rtas_dbg -l ibm,rks-hcalls
+    Could not get rtas token for ibm,indicator-0002
+    Could not get rtas token for ibm,integrated-stop-self
+    Could not get rtas token for ibm,indicator-9005
+    Could not get rtas token for ibm,extended-os-term
+    Could not get rtas token for ibm,indicator-0001
+    Could not get rtas token for ibm,sensor-0009
+    Could not get rtas token for ibm,recoverable-epow3
+    Could not get rtas token for ibm,sensor-9005
+    Could not get rtas token for ibm,change-msix-capable
+    Could not get rtas token for ibm,sensor-0005
+    Could not get rtas token for ibm,sensor-0001
+    ibm,rks-hcalls                          -536870912
+    
+    The large negatives values are due to incompatible format(%d).
+    The data type of the token variable is uint32_t.This patch
+    modifies the format(%u) to align with its data type(uint32_t).
+    
+    with the patch:
+    [root@xxx powerpc-utils]# ./src/rtas_dbg -l ibm,rks-hcalls
+    Could not get rtas token for ibm,indicator-0002
+    Could not get rtas token for ibm,integrated-stop-self
+    Could not get rtas token for ibm,indicator-9005
+    Could not get rtas token for ibm,extended-os-term
+    Could not get rtas token for ibm,indicator-0001
+    Could not get rtas token for ibm,sensor-0009
+    Could not get rtas token for ibm,recoverable-epow3
+    Could not get rtas token for ibm,sensor-9005
+    Could not get rtas token for ibm,change-msix-capable
+    Could not get rtas token for ibm,sensor-0005
+    Could not get rtas token for ibm,sensor-0001
+    ibm,rks-hcalls                          3758096384
+    
+    Reported-by: Shirisha Ganta <shirisha@linux.ibm.com>
+    Signed-off-by: Likhitha Korrapati <likhitha@linux.ibm.com>
+    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
+
+diff --git a/src/rtas_dbg.c b/src/rtas_dbg.c
+index ebc7474..6c7854a 100644
+--- a/src/rtas_dbg.c
++++ b/src/rtas_dbg.c
+@@ -200,10 +200,10 @@ void print_rtas_tokens(struct rtas_token *tok, struct rtas_token *tok_list)
+ 	struct rtas_token *t;
+ 
+ 	if (tok)
+-		printf("%-40s%d\n", tok->name, tok->token);
++		printf("%-40s%u\n", tok->name, tok->token);
+ 	else {
+ 		for (t = tok_list; t; t = t->next)
+-			printf("%-40s%d\n", t->name, t->token);
++			printf("%-40s%u\n", t->name, t->token);
+ 	}
+ }
+ 
+@@ -217,7 +217,7 @@ int set_rtas_dbg(struct rtas_token *tok)
+ 	args.nret = htobe32(1);
+ 	args.args[0] = htobe32(tok->token);
+ 
+-	printf("Enabling rtas debug for %s (%d)\n", tok->name, tok->token);
++	printf("Enabling rtas debug for %s (%u)\n", tok->name, tok->token);
+ 
+ 	rc = rtas(&args);
+ 

SOURCES/powerpc-utils-support_partial_SMT_level_through_SYS_FS.patch

@@ -0,0 +1,65 @@
+commit 46c524be975a108d2b8d1cadb95003b9c2670c8e
+Author: Laurent Dufour <ldufour@linux.ibm.com>
+Date:   Thu Jun 29 16:41:37 2023 +0200
+
+    ppc64_cpu: Support partial SMT level through SYS FS smt/control files
+    
+    The next kernel release will support partial SMT level [1] though the SYS
+    FS file "devices/system/cpu/smt/control". This allows the SMT level to be
+    recorded in the kernel. With the current SMT level stored in the kernel,
+    when a new CPU is added, only the necessary threads are brought online.
+    
+    The legacy way to active threads through the SYS FS files
+    'devices/system/cpu/cpu<n>/online', is still used in the case the new SYS
+    FS API is not available. This allows compatibility with the previous kernel
+    versions.
+    
+    [1] https://lore.kernel.org/linuxppc-dev/20230705145143.40545-1-ldufour@linux.ibm.com/
+    
+    Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
+
+diff --git a/src/ppc64_cpu.c b/src/ppc64_cpu.c
+index 5fdf86a..c33a293 100644
+--- a/src/ppc64_cpu.c
++++ b/src/ppc64_cpu.c
+@@ -56,6 +56,8 @@
+ #define DIAGNOSTICS_RUN_MODE	42
+ #define CPU_OFFLINE		-1
+ 
++#define SYS_SMT_CONTROL "/sys/devices/system/cpu/smt/control"
++
+ #ifdef HAVE_LINUX_PERF_EVENT_H
+ struct cpu_freq {
+ 	int offline;
+@@ -360,6 +362,20 @@ static int is_dscr_capable(void)
+ 	return 0;
+ }
+ 
++/*
++ * Depends on kernel's CONFIG_HOTPLUG_CPU
++ */
++static int set_smt_control(int smt_state)
++{
++	if (set_attribute(SYS_SMT_CONTROL, "%d", smt_state)) {
++		/* Silently ignore kernel not supporting this feature */
++		if (errno != ENODEV)
++			perror(SYS_SMT_CONTROL);
++		return -1;
++	}
++	return 0;
++}
++
+ static int do_smt(char *state, bool numeric)
+ {
+ 	int rc = 0;
+@@ -388,7 +404,9 @@ static int do_smt(char *state, bool numeric)
+ 			return -1;
+ 		}
+ 
+-		rc = set_smt_state(smt_state);
++		/* Try using smt/control if failing, fall back to the legacy way */
++		if (set_smt_control(smt_state))
++			rc = set_smt_state(smt_state);
+ 	}
+ 
+ 	return rc;

SPECS/powerpc-utils.spec

@@ -1,27 +1,68 @@
 Name: powerpc-utils
 Version: 1.3.10
-Release: 6%{?dist}
+Release: 11%{?dist}
 Summary: PERL-based scripts for maintaining and servicing PowerPC systems
 
-Group: System Environment/Base
 License: GPLv2
 URL: https://github.com/ibm-power-utilities/powerpc-utils
 Source0: https://github.com/ibm-power-utilities/%{name}/archive/v%{version}/%{name}-%{version}.tar.gz
 Source1: nx-gzip.udev
+
 Patch0: powerpc-utils-1.3.10-manpages.patch
 Patch1: powerpc-utils-1.3.10-distro.patch
+
 # bz#2121470, Fix lsslot -c mem output when using 4GB LMB size
 Patch3: powerpc-utils-b1b9e7-LMB_size_4GB.patch
 Patch4: powerpc-utils-e1f1de-lmb_address_in_hexadecimal.patch
-Patch5: powerpc-utils-fix_setting_primary_slave_across_reboots.patch
-Patch6: powerpc-utils-f4c2b0-fix_display_of_mode_for_dedicated_donating_partition.patch
 
-# lparstat: Fix-negative-values-seen-while-running-lpar
+# bz#2110129, Add NVMf-FC boot support for Power - powerpc-utils
-Patch10: powerpc-utils-1.3.10-lparstat-Fix-negative-values-seen-while-running-lpar.patch
+Patch5: powerpc-utils-c01580-add_NVMf-FC_boot_support_part1.patch
+Patch6: powerpc-utils-2fbd7c-add_NVMf-FC_boot_support_part2.patch
+Patch7: powerpc-utils-git3847a1-support_multiple_dev_paths_for_a_nvmf_boot_device.patch
+Patch8: powerpc-utils-git04e5c9-handle_nsid_as_hex.patch
+Patch9: powerpc-utils-fix_setting_primary_slave_across_reboots.patch
+
+# lparstat: Fix display of mode for dedicated-donating partition
+Patch10: powerpc-utils-f4c2b0-fix_display_of_mode_for_dedicated_donating_partition.patch
+
+# lparstat: Fix negative values seen while running lparstat with -E option
+Patch11: powerpc-utils-73ba26-lparstat-fix_negative_values.patch
+
 # report-mixed-SMT-state
-Patch11: powerpc-utils-1.3.10-lparstat-report-mixed-SMT-state.patch
+Patch12: powerpc-utils-1.3.10-lparstat-report-mixed-SMT-state.patch
+
 # Fix-offline-threads-uninitialized-entries
-Patch12: powerpc-utils-1.3.10-lparstat-Fix-offline-threads-uninitialized-entries.patch
+Patch13: powerpc-utils-1.3.10-lparstat-Fix-offline-threads-uninitialized-entries.patch
+
+# ppc64_cpu: Support partial SMT level through SYS FS smt/control files
+Patch14: powerpc-utils-support_partial_SMT_level_through_SYS_FS.patch
+
+# new hook mechanism has been introduced in powerpc-utils allowing application to be aware of the ongoing LPM
+patch15: powerpc-utils-c3ce3040ea9ed49345756136d61eb402e32402e8.patch
+patch16: powerpc-utils-1ac96f8ab7c27095be90eb2e69ae57e8b43eccbe.patch
+Patch17: powerpc-utils-f2a4619ef6be747f53e5f631f8b23b5edb9bb023.patch
+Patch18: powerpc-utils-372599ed28d65a79d4c3b3405a8e04034eb58e09.patch
+Patch19: powerpc-utils-e0928dc5e5375591a4cff6ffabc6063771288f59.patch
+Patch20: powerpc-utils-d0bc79aedaf76eff09a5d1f399da09561a4d4d7d.patch
+Patch21: powerpc-utils-7698adc945372e901c2bc3f7066a5a1c219bf1d8.patch
+
+# lpar can't boot up after installation if nsid of nvme device is greater than 10.
+Patch22: powerpc-utils-8a7aa61c5f520df03e53e6f7e1d63b7d5c432376.patch
+
+# rtas_dbg -l returns large negativ value
+Patch23: powerpc-utils-rtas_dbg_return_negativ_value.patch
+
+# Support multiple dev paths for a nvme boot device
+Patch24: 0001-scripts-bootlist-Support-multiple-dev-paths-for-a-nv.patch
+
+# segault when running nvram --print-config
+Patch25: powerpc-utils-1.3.10-nvram-print-config-crash.patch
+
+# segault when running nvram --nvram-size 268435456
+Patch26: powerpc-utils-1.3.10-nvram-size-crash.patch
+
+# nvram help page and man page are not in sync
+Patch27: powerpc-utils-1.3.10-nvram-manpage.patch
 
 ExclusiveArch: ppc %{power64}
 
@@ -51,13 +92,20 @@ Requires(preun): systemd
 Requires(postun): systemd
 Requires: kmod
 Requires: which
-Requires: gawk
+Requires: /usr/bin/awk
-Requires: bc
+Requires: /usr/bin/basename
-Requires: findutils
+Requires: /usr/bin/bc
-Requires: grep
+Requires: /usr/bin/cat
-Requires: sed
+Requires: /usr/bin/cut
-Requires: systemd-udev
+Requires: /usr/bin/echo
-Requires: coreutils
+Requires: /usr/bin/find
+Requires: /bin/grep
+Requires: /usr/bin/head
+Requires: /usr/bin/ls
+Requires: /usr/bin/sed
+Requires: /usr/bin/tr
+Requires: /usr/bin/udevadm
+
 
 %description core
 Core utilities for maintaining and servicing PowerPC systems.
@@ -66,7 +114,6 @@ Core utilities for maintaining and servicing PowerPC systems.
 %prep
 %autosetup -p1
 
-
 %build
 export CFLAGS="$RPM_OPT_FLAGS -fno-strict-aliasing"
 ./autogen.sh
@@ -102,6 +149,9 @@ ln -s serv_config.8 %{buildroot}%{_mandir}/man8/uspchrp.8
 # deprecated, use sosreport instead
 rm -f $RPM_BUILD_ROOT%{_sbindir}/snap $RPM_BUILD_ROOT%{_mandir}/man8/snap.8*
 
+# add hierachy /etc/drmgr.d/pmig
+mkdir -p $RPM_BUILD_ROOT/etc/drmgr.d/pmig
+
 %post core
 %systemd_post hcn-init.service
 # update the smt.state file with current SMT
@@ -129,7 +179,8 @@ systemctl enable hcn-init.service >/dev/null 2>&1 || :
 %files core
 %license COPYING
 %dir %{_localstatedir}/lib/powerpc-utils
-%config(noreplace) %{_localstatedir}/lib/powerpc-utils/smt.state
+%dir /etc/drmgr.d/pmig
+%verify(not md5 size mtime) %config(noreplace) %{_localstatedir}/lib/powerpc-utils/smt.state
 %{_unitdir}/smtstate.service
 %{_unitdir}/smt_off.service
 %{_unitdir}/hcn-init.service
@@ -201,123 +252,158 @@ systemctl enable hcn-init.service >/dev/null 2>&1 || :
 %{_mandir}/man8/nvram.8*
 %{_mandir}/man8/ofpathname.8*
 %{_mandir}/man8/drmgr.8*
+%{_mandir}/man8/drmgr-hooks.8*
 %{_mandir}/man8/lparnumascore.8*
 
+
 %changelog
-* Wed Jul 26 2023 Than Ngo <than@redhat.com> - 1.3.10-6
+* Sat Jun 29 2024 Than Ngo <than@redhat.com> - 1.3.10-11
+- Resolves: RHEL-23620, nvram help page and man page are not in sync
+- Resolves: RHEL-23619, segault when running nvram --nvram-size 268435456
+- Resolves: RHEL-23624, segault when running nvram --print-config
+
+* Tue Jan 30 2024 Than Ngo <than@redhat.com> - 1.3.10-10
+- Resolves: RHEL-22830, Support multiple dev paths for a nvme boot device
+
+* Wed Jan 10 2024 Than Ngo <than@redhat.com> - 1.3.10-9
+- Resolves: RHEL-20350, getting larger Negative value while running rtas_dbg -l
+- Resolves: RHEL-19076, installation fails if nsid of nvme device is greater than 10
+- Resolves: RHEL-11456, add new /etc/drmgr.d/pmig hierarchy
+
+* Mon Nov 27 2023 Than Ngo <than@redhat.com> - 1.3.10-8
+- Resolves: RHEL-16045, Support partial SMT level through SYS FS smt/control files
+- Resolves: RHEL-11456, LPM hooks
+ 
+* Wed Jul 26 2023 Than Ngo <than@redhat.com> - 1.3.10-7
 - Fix negative values seen while running lpar
 - Fix lparstat error with mixed SMT state
-Resolves: #2225135
+Resolves: #2225371
 
-* Sat Jun 17 2023 Than Ngo <than@redhat.com> - 1.3.10-5
+* Wed May 10 2023 Than Ngo <than@redhat.com> - 1.3.10-6
-- Resolves: #2207649, Add udev rule for the nx-gzip in to the core subpackage
+- Resolves: #2166870, lparstat: Fix display of mode for dedicated-donating partition
+- Resolves: #2169269, lparstat: Fix negative values seen while running lparstat with -E option
 
-* Tue Apr 25 2023 Than Ngo <than@redhat.com> - 1.3.10-4
+* Mon Dec 12 2022 Than Ngo <than@redhat.com> - 1.3.10-5
-- Resolves: #2166871, lparstat showing incorrect mode in a dedicated-donating LPAR
+- Resolves: #2125152, HNV bond fails to come up with sriov interface as active slave
 
-* Mon Nov 28 2022 Than Ngo <than@redhat.com> - 1.3.10-3
+* Thu Dec 08 2022 Than Ngo <than@redhat.com> - 1.3.10-4
-- Resolves: #2148878, HNV bond fails to come up with sriov interface as active slave
+- Resolves: #2150698, handle nsid of nvmf device as hexadecimal number
+- Resolves: #2150697, setup multiple device path for a nvmf boot device
 
-* Fri Oct 21 2022 Than Ngo <than@redhat.com> - 1.3.10-2
+* Thu Nov 03 2022 Than Ngo <than@redhat.com> - 1.3.10-3
-- Resolves: #2121481, Fix lsslot -c mem output when using 4GB LMB size
+- Resolves: #2111991, Add udev rule for the nx-gzip in to the core subpackage
+- Resolves: #2121470, Fix lsslot -c mem output when using 4GB LMB size
+- Resolves: #2110129, Add NVMf-FC boot support for Power
+
+* Mon Jun 06 2022 Than Ngo <than@redhat.com> - 1.3.10-2
+- Related: #2089106, install smt.state as config file 
 
 * Mon Jun 06 2022 Than Ngo <than@redhat.com> - 1.3.10-1
-- Resolves: #2051330, Linux Hybrid Network Virtualization update
+- Resolves: #1920964, P10 Power Mode Reporting
-- Resolves: #2083469, smtstate --save command failed 
+- Resolves: #2050893, Linux Hybrid Network Virtualizatio
+- Resolves: #2065169, bootloader fails to update boot order after OS install
+- Resolves: #2071862, Fix NM HNV setting primary slave
+- Resolves: #2089106, smtstate --save command failed
 
-* Fri May 13 2022 Than Ngo <than@redhat.com> - 1.3.9-3
+* Fri Jan 14 2022 Than Ngo <than@redhat.com> - 1.3.9-6
-- Resolves: #2059459, add new DRC type description strings for latest PCIe slot types 
+- Resolves: #2039201, santize devspec output of a newline if one is present
-- Resolves: #2078514, Fix NM HNV setting primary slave
-- Resolves: #2083469, smtstate test failed as smtstate --save command failed
 
-* Thu Dec 09 2021 Than Ngo <than@redhat.com> - 1.3.9-1
+* Tue Dec 07 2021 Than Ngo <than@redhat.com> - 1.3.9-5
-- Resolves: #2028690, rebase to 1.3.9
+- Resolves: #2024038 - HNV interface fails to configure when added in lpar shutdown state
 
-* Thu Dec 02 2021 Than Ngo <than@redhat.com> - 1.3.8-10
+* Thu Nov 11 2021 Than Ngo <than@redhat.com> - 1.3.9-4
-- Related: #2022225, increase release
+- enable support vnic as backend for HNV interface
+- fixed hexdump format
+  Resolves: #2022235
 
-* Thu Nov 11 2021 Than Ngo <than@redhat.com> - 1.3.8-9
+* Wed Oct 20 2021 Than Ngo <than@redhat.com> - 1.3.9-3
-- Resolves: #2022225, enable support vnic as backend for HNV interfaces 
+- Resolves: #2014916, marked smt.state as %%ghost
 
-* Thu Oct 07 2021 Than Ngo <than@redhat.com> - 1.3.8-8
+* Tue Aug 10 2021 Mohan Boddu <mboddu@redhat.com> - 1.3.9-2
-- lsdevinfo: optimize criteria filtering
+- Rebuilt for IMA sigs, glibc 2.34, aarch64 flags
+  Related: rhbz#1991688
 
-* Fri Jul 16 2021 Than Ngo <than@redhat.com> - 1.3.8-7
+* Mon Jul 19 2021 Than Ngo <than@redhat.com> - 1.3.9-1
-- Related: #1938420, Fix checking HCNID array size at boot time
+- Resolves: #1873868, rebase to 1.3.9
 
-* Thu Apr 01 2021 Than Ngo <than@redhat.com> - 1.3.8-6
+* Fri Jun 11 2021 Than Ngo <than@redhat.com> - 1.3.8-9
-- Resolves: #1935658, New lparstat -x option to report the security flavor
+- Resolves: #1937038, New lparstat -x option to report the security flavor
-- Resolves: #1953818, Use od instead xxd
+- Use od instead xxd
-- Resolves: #1938420, rebase patch fix_boot-time_bonding_interface_cleanup_and_avoid_use_ifcfg 
+- rebase patch fix_boot-time_bonding_interface_cleanup_and_avoid_use_ifcfg
-- Resolves: #1940358, ppc64_cpu --help does not list --version as an option 
+- ppc64_cpu --help does not list --version as an option
-- Resolves: #1951068, take care of NUMA topology when removing memory (DLPAR)
+- take care of NUMA topology when removing memory (DLPAR)
 
-* Wed Feb 03 2021 Than Ngo <than@redhat.com> - 1.3.8-5
+* Fri Apr 16 2021 Mohan Boddu <mboddu@redhat.com> - 1.3.8-8
-- Resolves: #1924150, Fix boot-time bonding interface cleanup and avoid use ifcfg
+- Rebuilt for RHEL 9 BETA on Apr 15th 2021. Related: rhbz#1947937
 
-* Mon Dec 21 2020 Than Ngo <than@redhat.com> - 1.3.8-4
+* Mon Feb 08 2021 Than Ngo <than@redhat.com> - 1.3.8-7
-- Resolves: #1909526, additional patches to support Linux Hybrid Network Virtualization
+- updated hcnmgr manpage
-- Resolves: #1909135, move commands that dont depend on perl to core subpackage
 
-* Tue Oct 06 2020 Than Ngo <than@redhat.com> - 1.3.8-3
+* Mon Feb 08 2021 Than Ngo <than@redhat.com> - 1.3.8-6
-- Resolves: #1868474, ofpathname: Use NVMe controller physical nsid
+- Fix boot-time bonding interface cleanup and avoid use ifcfg
-- Resolves: #1885532, sys_ident: Skip length field from search
+
+* Wed Jan 27 2021 Fedora Release Engineering <releng@fedoraproject.org> - 1.3.8-5
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild
+
+* Tue Dec 22 2020 Than Ngo <than@redhat.com> - 1.3.8-4
+- additional patches to support Linux Hybrid Network Virtualization
+- move commands that dont depend on perl to core subpackage
+- update hcnmgr patch
+- sys_ident: Skip length field from search
+- ofpathname: Use NVMe controller physical nsid
+
+* Thu Oct 01 2020 Than Ngo <than@redhat.com> - 1.3.8-3
+- add hcnmgr man page
 
 * Thu Oct 01 2020 Than Ngo <than@redhat.com> - 1.3.8-2
-- Related: #1853297, add missing hcnmgr manpage and Req on which
+- clean up systemd service 
 
-* Thu Oct 01 2020 Than Ngo <than@redhat.com> - 1.3.8-1
+* Fri Sep 04 2020 Than Ngo <than@redhat.com> - 1.3.8-1
-- Resolves: #1853297, rebase to 1.3.8
+- update to 1.3.8
-- Resolves: #1802181, SR-IOV - Linux Hybrid Network Virtualization
-- Resolves: #1844421, Include vcpustat
 
-* Wed Jun 24 2020 Than Ngo <than@redhat.com> - 1.3.6-11
+* Tue Jul 28 2020 Fedora Release Engineering <releng@fedoraproject.org> - 1.3.7-7
-- Resolves: #1847604, ofpathname: failed to boot
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild
 
-* Fri Jun 19 2020 Than Ngo <than@redhat.com> - 1.3.6-10
+* Thu Jul 09 2020 Than Ngo <than@redhat.com> - 1.3.7-6
-- Resolves: #1848839, update lparstat man page with -E option
+- Track and expose idle PURR and SPURR ticks
+- ofpathname: speed up l2of_scsi()
+- ofpathname: failed to boot
+- update lparstat man page with -E option
+- enable support for ibm,drc-info property
 
-* Fri May 22 2020 Than Ngo <than@redhat.com> - 1.3.6-9
+* Sat Mar 28 2020 Than Ngo <than@redhat.com> - 1.3.7-5
-- Resolves: #1837751, ofpathname: speed up l2of_scsi()
+- move drmgr in core to avoid pulling in Perl
 
-* Fri May 15 2020 Than Ngo <than@redhat.com> - 1.3.6-8
+* Mon Mar 09 2020 Than Ngo <than@redhat.com> - 1.3.7-4
-- Related: #1783285, update the patches V4
+- update_flash_nv: fixup null byte command substitution warning
+- drmgr: Fix segfault when running 'drmgr -c pmig -h'
 
-* Wed May 13 2020 Than Ngo <than@redhat.com> - 1.3.6-7
+* Thu Jan 30 2020 Fedora Release Engineering <releng@fedoraproject.org> - 1.3.7-3
-- Resolves: #1783285, Track and expose idle PURR and SPURR ticks
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild
 
-* Wed Mar 25 2020 Than Ngo <than@redhat.com> - 1.3.6-6
+* Thu Dec 19 2019 Than Ngo <than@redhat.com> - 1.3.7-2
-- Resolves: #1819566 - move drmgr in core to avoid pulling in Perl
+- add systemd service to set default system SMT mode
-- Resolves: #1806870 - ignored null byte in input 
-- Resolves: #1779197 - enable support for ibm,drc-info property
 
-* Wed Dec 04 2019 Than Ngo <than@redhat.com> - 1.3.6-5
+* Wed Dec 18 2019 Than Ngo <than@redhat.com> - 1.3.7-1
-- Resolves: #1779257, Safe bootlist update
+- update to 1.3.7 
 
-* Wed Jul 24 2019 Than Ngo <than@redhat.com> - 1.3.6-4
+* Fri Jul 26 2019 Fedora Release Engineering <releng@fedoraproject.org> - 1.3.6-3
-- Resolves: #1719372 - wrong disk gets booted after installation
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild
 
-* Fri Jun 07 2019 Than Ngo <than@redhat.com> - 1.3.6-3
+* Sat Feb 02 2019 Fedora Release Engineering <releng@fedoraproject.org> - 1.3.6-2
-- Resolves: #1718254, improve handling of errors from subsidiary scripts
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild
 
-* Wed Jun 05 2019 Than Ngo <than@redhat.com> - 1.3.6-2
+* Wed Jan 16 2019 Than Ngo <than@redhat.com> - 1.3.6-1
-- Resolves: #1716425, lparstat and update_flash fixes
+- update to 1.3.6
 
-* Mon Apr 01 2019 Than Ngo <than@redhat.com> - 1.3.6-1
+* Fri Nov 30 2018 Than Ngo <than@redhat.com> - 1.3.5-4
-- Resolves: #1666618, rebase to 1.3.6
+- install missing pseries_platform and update_flash_nv man pages
 
-* Tue Dec 04 2018 Than Ngo <than@redhat.com> - 1.3.5-5
+* Thu Nov 29 2018 Than Ngo <than@redhat.com> - 1.3.5-3
-- Related: #1655903, add missing man pages
+- added pseries_platform and update_flash_nv man pages
 
-* Tue Dec 04 2018 Than Ngo <than@redhat.com> - 1.3.5-4
+* Fri Jul 13 2018 Fedora Release Engineering <releng@fedoraproject.org> - 1.3.5-2
-- Resolves: #1655903, lsslot -c mem is not displaying any information
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
-
-* Tue Nov 27 2018 Than Ngo <than@redhat.com> - 1.3.5-3
-- Resolves: #1653621, fix to display logical name using bootlist -o option
-
-* Sat Nov 10 2018 Than Ngo <than@redhat.com> - 1.3.5-2
-- fix metadate issue detected by rpmdiff
-  Related: #1608172
 
 * Mon Jun 18 2018 Dan Horák <dan[at]danny.cz> - 1.3.5-1
 - Rebased to 1.3.5