rpms/pnm2ppa
7
0
Fork 0
Code Issues Pull Requests Releases Activity
c9
pnm2ppa/SOURCES/pbm2ppa-20000205.diff

895 lines
27 KiB
Diff
Raw Permalink Normal View History

import pnm2ppa-1.04-52.el9
2022-05-17 10:09:07 +00:00
diff -up pbm2ppa-0.8.6/CALIBRATION.20000205 pbm2ppa-0.8.6/CALIBRATION
--- pbm2ppa-0.8.6/CALIBRATION.20000205 1998-08-22 14:44:07.000000000 +0100
+++ pbm2ppa-0.8.6/CALIBRATION 2008-09-24 15:15:53.000000000 +0100
@@ -10,9 +10,22 @@ during this procedure (like 600)]
The 'pbmtpg' program generates a full-page (8.5"x11") test pattern in
pbmraw (P4) format on stdout. The output may be fed directly into pbm2ppa
in order to print a calibration pattern on your printer with commands such as:
+Assuming you printer is on /dev/lp0
- pbmtpg | pbm2ppa > /dev/lp1
+ pbmtpg | pbm2ppa > /dev/lp0
( as root )
+(Note: /dev/lp0 is the default device for the primary parallel port on systems
+with 2.2.x or later Linux kernels; it is /dev/lp1 on systems with
+older Linux 2.0.x kernels)
+
+For other papersizes, the command must specify a valid size, for both
+pbmtpg and pbm2ppa:
+
+ pbmtpg -a4 | pbm2ppa -s a4 > /dev/lp0
+ pbmtpg -legal | pbm2ppa -s legal > /dev/lp0
+ pbmtpg -letter | pbm2ppa -s letter > /dev/lp0
+
+For A4, US Legal of US Letter (default).
- or -
@@ -33,3 +46,7 @@ paper. Also, the margins should be able
causing the printer to choke with 'blinking lights syndrome'.
[TODO: Add shearing adjustments to pbm2ppa and explain here]
+
+
+
+
diff -up pbm2ppa-0.8.6/defaults.1000.h.20000205 pbm2ppa-0.8.6/defaults.1000.h
--- pbm2ppa-0.8.6/defaults.1000.h.20000205 1998-08-22 14:44:12.000000000 +0100
+++ pbm2ppa-0.8.6/defaults.1000.h 2008-09-24 15:17:47.000000000 +0100
@@ -1,19 +0,0 @@
-/* defaults.h
- * Default printer values. Edit these and recompile if so desired.
- * [Note: a /etc/pbm2ppa.conf file will override these]
- */
-#ifndef _DEFAULTS_H
-#define _DEFAULTS_H
-
-#define DEFAULT_PRINTER ( HP1000 )
-
-/* Refer to CALIBRATION file about these settings */
-#define DEFAULT_X_OFFSET ( 100 )
-#define DEFAULT_Y_OFFSET ( -650 )
-
-#define DEFAULT_TOP_MARGIN ( 150 )
-#define DEFAULT_LEFT_MARGIN ( 150 )
-#define DEFAULT_RIGHT_MARGIN ( 150 )
-#define DEFAULT_BOTTOM_MARGIN ( 150 )
-
-#endif
diff -up pbm2ppa-0.8.6/defaults.720.h.20000205 pbm2ppa-0.8.6/defaults.720.h
--- pbm2ppa-0.8.6/defaults.720.h.20000205 1998-08-22 14:44:12.000000000 +0100
+++ pbm2ppa-0.8.6/defaults.720.h 2008-09-24 15:17:47.000000000 +0100
@@ -1,19 +0,0 @@
-/* defaults.h
- * Default printer values. Edit these and recompile if so desired.
- * [Note: a /etc/pbm2ppa.conf file will override these]
- */
-#ifndef _DEFAULTS_H
-#define _DEFAULTS_H
-
-#define DEFAULT_PRINTER ( HP720 )
-
-/* Refer to CALIBRATION file about these settings */
-#define DEFAULT_X_OFFSET ( 169 )
-#define DEFAULT_Y_OFFSET ( -569 )
-
-#define DEFAULT_TOP_MARGIN ( 150 )
-#define DEFAULT_LEFT_MARGIN ( 150 )
-#define DEFAULT_RIGHT_MARGIN ( 150 )
-#define DEFAULT_BOTTOM_MARGIN ( 150 )
-
-#endif
diff -up pbm2ppa-0.8.6/defaults.820.h.20000205 pbm2ppa-0.8.6/defaults.820.h
--- pbm2ppa-0.8.6/defaults.820.h.20000205 1998-08-22 14:44:12.000000000 +0100
+++ pbm2ppa-0.8.6/defaults.820.h 2008-09-24 15:17:47.000000000 +0100
@@ -1,19 +0,0 @@
-/* defaults.h
- * Default printer values. Edit these and recompile if so desired.
- * [Note: a /etc/pbm2ppa.conf file will override these]
- */
-#ifndef _DEFAULTS_H
-#define _DEFAULTS_H
-
-#define DEFAULT_PRINTER ( HP820 )
-
-/* Refer to CALIBRATION file about these settings */
-#define DEFAULT_X_OFFSET ( 75 )
-#define DEFAULT_Y_OFFSET ( -500 )
-
-#define DEFAULT_TOP_MARGIN ( 80 )
-#define DEFAULT_LEFT_MARGIN ( 80 )
-#define DEFAULT_RIGHT_MARGIN ( 80 )
-#define DEFAULT_BOTTOM_MARGIN ( 150 )
-
-#endif
diff -up /dev/null pbm2ppa-0.8.6/defaults.h
--- /dev/null 2008-09-24 08:53:03.196006296 +0100
+++ pbm2ppa-0.8.6/defaults.h 2008-09-24 15:15:53.000000000 +0100
@@ -0,0 +1,53 @@
+/* defaults.h
+ * Default printer values. Edit these and recompile if so desired.
+ * [Note: a /etc/pbm2ppa.conf file will override these]
+ */
+
+#ifndef _DEFAULTS_H
+#define _DEFAULTS_H
+
+#ifndef DEFAULT_PRINTER
+#define DEFAULT_PRINTER ( HP720 )
+#endif
+
+/* for HP720 series */
+/* Refer to CALIBRATION file about these settings */
+#define HP720_X_OFFSET ( 169 )
+#define HP720_Y_OFFSET ( -569 )
+
+#define HP720_TOP_MARGIN ( 150 )
+#define HP720_LEFT_MARGIN ( 150 )
+#define HP720_RIGHT_MARGIN ( 150 )
+#define HP720_BOTTOM_MARGIN ( 150 )
+
+/* for HP820 series */
+/* Refer to CALIBRATION file about these settings */
+#define HP820_X_OFFSET ( 75 )
+#define HP820_Y_OFFSET ( -500 )
+
+#define HP820_TOP_MARGIN ( 80 )
+#define HP820_LEFT_MARGIN ( 80 )
+#define HP820_RIGHT_MARGIN ( 80 )
+#define HP820_BOTTOM_MARGIN ( 150 )
+
+/* for HP1000 series */
+/* Refer to CALIBRATION file about these settings */
+#define HP1000_X_OFFSET ( 100 )
+#define HP1000_Y_OFFSET ( -650 )
+
+#define HP1000_TOP_MARGIN ( 150 )
+#define HP1000_LEFT_MARGIN ( 150 )
+#define HP1000_RIGHT_MARGIN ( 150 )
+#define HP1000_BOTTOM_MARGIN ( 150 )
+
+#endif
+
+
+
+
+
+
+
+
+
+
diff -up pbm2ppa-0.8.6/INSTALL.20000205 pbm2ppa-0.8.6/INSTALL
--- pbm2ppa-0.8.6/INSTALL.20000205 1998-10-19 02:27:16.000000000 +0100
+++ pbm2ppa-0.8.6/INSTALL 2008-09-24 15:15:53.000000000 +0100
@@ -1,6 +1,6 @@
Overview
--------
-This file contains some quick notes on installation in general. For a
+ This file contains some quick notes on installation in general. For a
complete step-by-step instruction on how to install pbm2ppa for your
printer, please see INSTALL-MORE. (It was written for the 820, but it
should work for all supported models) Thanks to Michael Buehlmann for
@@ -9,14 +9,19 @@ writing that guide!
Compilation
-----------
To compile, you should simply run 'make' with the series of your
-printer. The following options are supported:
+printer. This will set the default printer to the HP720 series.
+To specify a different default printyer, the following options are supported:
make 720 # for 720 series - e.g. 722C
make 820 # for 820 series - e.g. 820Cse
make 1000 # for 1000 series
-If you choose to recompile for a different printer series, you must 'make
-clean' first.
+ If you choose to recompile for a different default printer series,
+you must 'make clean' first. However, the default printer choice
+selected at compilation time can be overridden with e.g., the
+"pbm2pppa -v 820 ..." command line option, or specified by e.g.,
+a "version 820" entry in the /etc/pbm2ppa.conf file.
+Type "pbm2ppa -h" to see the list of options.
Installation
------------
@@ -26,17 +31,23 @@ but you might want to tweak them). See
The other binary created, pbm2ppa, is a converter from a PBM
image to a stream of PPA data that can be sent directly to the printer.
-The PBM image is expected to be 600 dpi, 8.5"x11". These files can be
+The PBM image is expected to be 600 dpi, and the paper size
+can be 8.5"x11" (US Letter), 8.5"x14" (US Legal) or A4. These files can be
generated with ghostscript. Both the pbm and pbmraw devices are supported.
pbmraw is MUCH faster, so use it if you have it available!
+IMPORTANT: the PAPERSIZE option passed to ghostscript must match
+the paper size specified for pbm2ppa.
+Valid papersizes are: "letter" = "us" , "legal" , and "a4" .
Use
---
- To print a postscript file with this program, I use a simple
-shell script:
+ To print a postscript file with this program, on US Letter
+paper and a HP 710/720 series printer, I use a simple shell script:
-cat $1 | gs -sDEVICE=pbm -q -dNOPAUSE -r600 -sOutputFile=- - | \
-pbm2ppa - - | lpr
+cat $1 | gs -sDEVICE=pbm -q -dNOPAUSE -r600 -sPAPERSIZE=letter -sOutputFile=- - | \
+pbm2ppa -s letter -v 720 - - | lpr -l
+
+Valid printer versions are "720", "820" and "1000".
You can also set up a printer filter. See the documentation for
your print spooler for information on how to do that, or look in
diff -up pbm2ppa-0.8.6/INSTALL-MORE.20000205 pbm2ppa-0.8.6/INSTALL-MORE
--- pbm2ppa-0.8.6/INSTALL-MORE.20000205 1998-10-19 02:27:17.000000000 +0100
+++ pbm2ppa-0.8.6/INSTALL-MORE 2008-09-24 15:15:53.000000000 +0100
@@ -36,14 +36,21 @@ or put in your printer number (720, 820
file).
-2. To adjust the paper size to DIN A4, use the -s a4 option to pbm2ppa or
+2. To adjust the paper size to US Legal (8.5"x14"), use the -s legal option
+to pbm2ppa or change your pbm2ppa.conf file to read "papersize legal"
+To adjust the paper size to DIN A4, use the -s a4 option to pbm2ppa or
change your pbm2ppa.conf file to read "papersize a4" (see step 5).
-
+For US Letter (8.5"x11") paper is the default; "-s us", "-s letter",
+"papersize us" and "papersize letter" also specif this size.
3. You can now calibrate the printer with
-For US size paper:
+For US Letter size paper:
# pbmtpg | pbm2ppa > /dev/lp1 ( as root )
+or
+# pbmtpg -letter | pbm2ppa > /dev/lp1 ( as root )
+For US Legal size paper:
+# pbmtpg -legal | pbm2ppa -s a4 > /dev/lp1 ( as root )
For A4 size paper:
# pbmtpg -a4 | pbm2ppa -s a4 > /dev/lp1 ( as root )
diff -up pbm2ppa-0.8.6/Makefile.20000205 pbm2ppa-0.8.6/Makefile
--- pbm2ppa-0.8.6/Makefile.20000205 1998-10-11 16:17:16.000000000 +0100
+++ pbm2ppa-0.8.6/Makefile 2008-09-24 15:15:53.000000000 +0100
@@ -1,36 +1,23 @@
CC=gcc
-CFLAGS=-Wall -O2
+CFLAGS=-Wall -O2
LDFLAGS=
+PRINTER=HP720
-default:
- @echo Please specify the type of printer you wish to compile this
- @echo software for. Supported options are:
- @echo
- @echo make 720
- @echo make 820
- @echo make 1000
- @echo
- @exit
+default: all
-720.h:
- cp defaults.720.h defaults.h
+720: PRINTER=HP720
+720: all
-820.h:
- cp defaults.820.h defaults.h
+820: PRINTER=HP820
+820: all
-1000.h:
- cp defaults.1000.h defaults.h
+1000: PRINTER=HP1000
+1000: all
-720: 720.h all
-
-820: 820.h all
-
-1000: 1000.h all
-
-all: defaults.h pbm2ppa pbmtpg
+all: pbm2ppa pbmtpg
clean:
- rm -f *.o *~ pbmtpg pbm2ppa defaults.h
+ rm -f *.o *~ pbmtpg pbm2ppa
pbm2ppa: pbm2ppa.o ppa.o pbm.o cutswath.o
$(CC) $(LDFLAGS) -o pbm2ppa pbm2ppa.o ppa.o pbm.o cutswath.o
@@ -39,4 +26,11 @@ pbmtpg: pbmtpg.o
$(CC) $(CFLAGS) -o pbmtpg pbmtpg.o -lm
.c.o: $*.c ppa.h pbm.h
- $(CC) $(CFLAGS) -c $*.c
+ $(CC) $(CFLAGS) -DDEFAULT_PRINTER=$(PRINTER) -c $*.c
+
+
+
+
+
+
+
diff -up /dev/null pbm2ppa-0.8.6/pbm2ppa.1
--- /dev/null 2008-09-24 08:53:03.196006296 +0100
+++ pbm2ppa-0.8.6/pbm2ppa.1 2008-09-24 15:15:53.000000000 +0100
@@ -0,0 +1,135 @@
+.TH pnm2ppa "5 Feb 2000"
+.SH NAME
+pbm2ppa - convert portable bitmap (PBM) to HP's Printing Performance Architecture (PPA) file format
+.SH SYNOPSIS
+pbm2ppa [options] [ <\fIinfile\fR] > [ <\fIoutfile\fR]> ] ]
+
+.SH DESCRIPTION
+Reads portable bitmap (PBM) format as input. Outputs a stream suitable for
+processing by Hewlett-Packard's range of Printing Performance Architecture
+(PPA) printers.
+pnm2ppa supports the HP 710c, 712c, 720c, 722c, 820c, and 1000c
+series printers.
+.PP
+(Portable bitmap (PBM) format output can be produced from PostScript(tm) input
+by the GhostScript driver "pbmraw".)
+.PP
+
+
+.SH OPTIONS
+.\"{{{ infile
+.IP "\fB\\fIinfile\fR \fP"
+Input file \fIinfile\fR is either a path to a file or device, or '-' to indicate stdin (defaults to stdin)
+.\"}}}
+
+
+.\"{{{ outfile
+.IP "\fB\\fIoutfile\fR \fP"
+Output file \fIoutfile\fR is either a path to a file or device, or '-' to indicate stdout (defaults to stdout)
+.\"}}}
+
+
+.\"{{{ -b bottommargin
+.IP "\fB\-b \fIbottommargin\fR\fP"
+Sets the bottom margin \fIbottommargin\fR in units of 1/600 inches (e.g., -b 150 = 0.25")
+.\"}}}
+
+
+.\"{{{ -d
+.IP "\fB\-d\fP"
+Displays the current configuration
+.\"}}}
+
+
+.\"{{{ -f configfile
+.IP "\fB\-f \fIconfigfile\fR\fP"
+Overrides reading the configuration from /etc/pnm2ppa.conf, and uses
+\fIconfigfile\fR instead.
+.\"}}}
+
+
+.\"{{{ -h
+.IP "\fB\-h\fP"
+Displays program usage
+.\"}}}
+
+
+
+.\"{{{ -l leftmargin
+.IP "\fB\-l \fIleftmargin\fR\fP"
+Sets the left margin \fIleftmargin\fR in units of 1/600 inches (e.g., -l 150 = 0.25")
+.\"}}}
+
+
+.\"{{{ -r rightmargin
+.IP "\fB\-r \fIrightmargin\fR\fP"
+Sets the right margin \fIrightmargin\fR in units of 1/600 inches (e.g., -r 150 = 0.25")
+.\"}}}
+
+.\"{{{ -s papersize
+.IP "\fB\-s \fIpapersize\fR\fP"
+Sets the paper size. Possible values for \fIpapersize\fR are \fBa4\fP (A4),
+\fBletter\fP or \fBus\fP (US Letter, 8.5"x11"), and \fBlegal\fR (US Legal,
+8.5"x14").
+The default is US Letter.
+.\"}}}
+
+.\"{{{ -t topmargin
+.IP "\fB\-t \fItopmargin\fR\fP"
+Sets the top margin \fItopmargin\fR in units of 1/600 inches (ie -t 150 = 0.25")
+.\"}}}
+
+.\"{{{ -v printertype
+.IP "\fB\-v \fIprintertype\fP"
+Selects the printer model. Possible values of \fIprintertype\fR are:
+\fB710\fP, \fB712\fP, \fB720\fP, \fB722\fP, \fB820\fP and \fB1000\fP.
+The default is the HP DeskJet 7X0 Series (710, 712, 720, 722).
+.\"}}}
+
+
+.\"{{{ -x xoffset
+.IP "\fB\-x \fIxoffset\fR\fP"
+Sets the x-offset \fBxoffset\fR from the left of the page. Units are 1/600 inches
+.\"}}}
+
+.\"{{{ -y yoffset
+.IP "\fB\-y \fIyoffset\fR\fP"
+Sets the y-offset \fByoffset\fR from the top of the page. Units are 1/600 inches
+.\"}}}
+
+
+.SH NOTES
+The configuration file is read in first. Command line arguments then modify the resulting definitions.
+.PP
+The -x and -y options accumulate. The -v option resets all definitions back to
+an inbuilt default for that printer and should be used before subsequent -b -l -r, -t, -x, and -y arguments.
+.SH "SEE ALSO"
+pbm(5)
+
+.SH FILES
+
+.\"{{{ /etc/pbm2ppa.conf
+.IP "\fB\fI/etc/pbm2ppa.conf\fR\fP"
+Default configuration file
+.\"}}}
+
+
+.SH AUTHOR
+This code is licensed under the GNU Public License version 2. See
+LICENSE for details.
+.PP
+(c) 1998 Tim Norman
+.PP
+.SH HISTORY
+This program was written by Tim Norman. It originally
+supported black and white output on the 820 series. This program is
+almost obsolete; its successor pnm2ppa will support color printing.
+.SH BUGS
+This is a stable driver, but does not support color printing.
+
+
+
+
+
+
+
diff -up pbm2ppa-0.8.6/pbm2ppa.c.20000205 pbm2ppa-0.8.6/pbm2ppa.c
--- pbm2ppa-0.8.6/pbm2ppa.c.20000205 1998-09-16 01:00:27.000000000 +0100
+++ pbm2ppa-0.8.6/pbm2ppa.c 2008-09-24 15:15:53.000000000 +0100
@@ -17,10 +17,15 @@
/* Paper sizes in 600ths of an inch. */
-/* US is 8.5 in by 11 in */
+/* US Letter is 8.5 in by 11 in */
-#define USWIDTH (5100)
-#define USHEIGHT (6600)
+#define LETTERWIDTH (5100)
+#define LETTERHEIGHT (6600)
+
+/* US Legal is 8.5 in by 14 in */
+
+#define LEGALWIDTH (5100)
+#define LEGALHEIGHT (8400)
/* A4 is 210 mm by 297 mm == 8.27 in by 11.69 in */
@@ -121,16 +126,35 @@ int print_pbm (FILE *in)
void set_printer_specific_defaults()
{
- printer.x_offset=DEFAULT_X_OFFSET;
- printer.y_offset=DEFAULT_Y_OFFSET;
switch(printer.version)
{
case HP720:
+ printer.x_offset=HP720_X_OFFSET;
+ printer.y_offset=HP720_Y_OFFSET;
+ printer.top_margin=HP720_TOP_MARGIN;
+ printer.left_margin=HP720_LEFT_MARGIN;
+ printer.right_margin=HP720_RIGHT_MARGIN;
+ printer.bottom_margin=HP720_BOTTOM_MARGIN;
printer.marg_diff=2;
printer.bufsize = 200*1024;
break;
case HP820:
+ printer.x_offset=HP820_X_OFFSET;
+ printer.y_offset=HP820_Y_OFFSET;
+ printer.top_margin=HP820_TOP_MARGIN;
+ printer.left_margin=HP820_LEFT_MARGIN;
+ printer.right_margin=HP820_RIGHT_MARGIN;
+ printer.bottom_margin=HP820_BOTTOM_MARGIN;
+ printer.marg_diff=0x62;
+ printer.bufsize = 100*1024;
+ break;
case HP1000:
+ printer.x_offset=HP1000_X_OFFSET;
+ printer.y_offset=HP1000_Y_OFFSET;
+ printer.top_margin=HP1000_TOP_MARGIN;
+ printer.left_margin=HP1000_LEFT_MARGIN;
+ printer.right_margin=HP1000_RIGHT_MARGIN;
+ printer.bottom_margin=HP1000_BOTTOM_MARGIN;
printer.marg_diff=0x62;
printer.bufsize = 100*1024;
break;
@@ -144,15 +168,17 @@ void show_usage(char* prog)
{
printf("usage: %s [ options ] [ <infile> [ <outfile> ] ]\n\n",prog);
printf(" Prints a pbm- or pbmraw-format <infile> to HP720/820/1000-format <outfile>.\n\n");
- printf(" -v <version> printer version (720, 820, or 1000)\n");
- printf(" -x <xoff> vertical offset adjustment in 1\"/600\n");
- printf(" -y <yoff> horizontal offset adjustment in 1\"/600\n");
- printf(" -t <topmarg> top margin in 1\"/600 (default: 150 = 0.25\")\n");
- printf(" -l <leftmarg> left margin in 1\"/600 (default: 150 = 0.25\")\n");
- printf(" -r <rightmarg> right margin in 1\"/600 (default: 150 = 0.25\")\n");
- printf(" -b <botmarg> bottom margin in 1\"/600 (default: 150 = 0.25\")\n");
- printf(" -s <paper> paper size (us, a4, default: us)\n");
+ printf(" -b <margin> bottom margin in 1\"/600 (default: 150 = 0.25\")\n");
+ printf(" -d dumps the configuration to stdout");
printf(" -f <cfgfile> read <cfgfile> as parameters\n\n");
+ printf(" -h displays this help text");
+ printf(" -l <margin> left margin in 1\"/600 (default: 150 = 0.25\")\n");
+ printf(" -r <margin> right margin in 1\"/600 (default: 150 = 0.25\")\n");
+ printf(" -s <paper> paper size (us,letter,legal,a4, default: us)\n");
+ printf(" -t <margin> top margin in 1\"/600 (default: 150 = 0.25\")\n");
+ printf(" -v <model> printer model (710, 712, 720, 722, 820, or 1000)\n");
+ printf(" -x <offset> vertical offset adjustment in 1\"/600\n");
+ printf(" -y <offset> horizontal offset adjustment in 1\"/600\n");
printf(" The -x and -y options accumulate. The -v option resets the horizontal and\n");
printf(" vertical adjustments to an internal default. <infile> and <outfile> default\n");
printf(" to stdin and stdout. '-' is a synonym for stdin and stdout.\n\n");
@@ -173,7 +199,13 @@ void show_usage(char* prog)
void parm_version(char* arg)
{
- if(!strcasecmp(arg,"hp720") || !strcmp(arg,"720"))
+ if(!strcasecmp(arg,"hp710") || !strcmp(arg,"710"))
+ printer.version=HP720;
+ else if(!strcasecmp(arg,"hp712") || !strcmp(arg,"712"))
+ printer.version=HP720;
+ else if(!strcasecmp(arg,"hp720") || !strcmp(arg,"720"))
+ printer.version=HP720;
+ else if(!strcasecmp(arg,"hp722") || !strcmp(arg,"722"))
printer.version=HP720;
else if(!strcasecmp(arg,"hp820") || !strcmp(arg,"820"))
printer.version=HP820;
@@ -191,7 +223,10 @@ void parm_iversion(int arg)
{
switch(arg)
{
+ case 710:
+ case 712:
case 720:
+ case 722:
printer.version=HP720;
break;
case 820:
@@ -262,10 +297,15 @@ void read_config_file(char* fname)
printer.bottom_margin=value;
else if(!strncmp(key,"papersize",len))
{
- if(!strcmp(buf,"us"))
+ if(!strcmp(buf,"us") || !strcmp(buf,"letter"))
+ {
+ Width = LETTERWIDTH;
+ Height = LETTERHEIGHT;
+ }
+ else if(!strcmp(buf,"legal"))
{
- Width = USWIDTH;
- Height = USHEIGHT;
+ Width = LEGALWIDTH;
+ Height = LEGALHEIGHT;
}
else if(!strcmp(buf,"a4"))
{
@@ -313,15 +353,9 @@ int main (int argc, char *argv[])
FILE *in=stdin, *out=stdout;
struct stat tmpstat;
- printer.version = DEFAULT_PRINTER;
- printer.x_offset = DEFAULT_X_OFFSET;
- printer.y_offset = DEFAULT_Y_OFFSET;
- printer.top_margin = DEFAULT_TOP_MARGIN;
- printer.left_margin = DEFAULT_LEFT_MARGIN;
- printer.right_margin = DEFAULT_RIGHT_MARGIN;
- printer.bottom_margin = DEFAULT_BOTTOM_MARGIN;
- Width = USWIDTH;
- Height = USHEIGHT;
+ printer.version = DEFAULT_PRINTER;
+ Width = LETTERWIDTH;
+ Height = LETTERHEIGHT;
set_printer_specific_defaults();
if(!stat(defaultcfgfile,&tmpstat))
@@ -356,10 +390,15 @@ int main (int argc, char *argv[])
else if(!strcmp(argv[argn],"-s"))
{
argn++;
- if(!strcmp(argv[argn],"us"))
+ if(!strcmp(argv[argn],"us") || !strcmp(argv[argn],"letter"))
{
- Width = USWIDTH;
- Height = USHEIGHT;
+ Width = LETTERWIDTH;
+ Height = LETTERHEIGHT;
+ }
+ else if(!strcmp(argv[argn],"legal"))
+ {
+ Width = LEGALWIDTH;
+ Height = LEGALHEIGHT;
}
else if(!strcmp(argv[argn],"a4"))
{
@@ -414,3 +453,4 @@ int main (int argc, char *argv[])
return print_pbm (in);
}
+
diff -up /dev/null pbm2ppa-0.8.6/pbm2ppa.conf
--- /dev/null 2008-09-24 08:53:03.196006296 +0100
+++ pbm2ppa-0.8.6/pbm2ppa.conf 2008-09-24 15:15:53.000000000 +0100
@@ -0,0 +1,58 @@
+# Sample configuration file for the HP720/HP820/HP1000 PPA Printers
+#
+# This file will be automatically read upon startup if it's placed in
+# /etc/pbm2ppa.conf
+#
+
+# uncomment options (remove "#" at beginning of line) to activate them
+
+#valid printer versions are 710, 712, 720, 722. 820, 100
+# 710 = 712 = 720 = 722: HP DeskJet 710C, 712C, 720C, 722C (default)
+# 820: HP DeskJet 820Cse, 820Cxi
+# 1000: HP DeskJet 1000Cse, 1000Cxi
+#version 720
+#version 820
+#version 1000
+#
+
+# valid papersizes are us, letter, legal, a4
+# US Letter (8.5"x11"): us, letter (default)
+# US Legal (8.5"x14"): legal
+# A4 : a4
+#papersize letter
+#papersize legal
+#papersize a4
+
+
+#Defaults for 720 series:
+# X-offset, Y-Offset: (Adjust these for your printer, see CALIBRATE)
+#xoff 169
+#yoff -569
+# 1/4 inch margins all around (at 600 DPI)
+#top 150
+#bottom 150
+#left 150
+#right 150
+
+#Defaults for 820 series:
+# X-offset, Y-Offset: (Adjust these for your printer, see CALIBRATE)
+#xoff 75
+#yoff -500
+# 1/4 inch margins all around (at 600 DPI)
+#top 80
+#bottom 150
+#left 80
+#right 80
+
+#Defaults for 820 series:
+# X-offset, Y-Offset: (Adjust these for your printer, see CALIBRATE)
+#xoff 100
+#yoff -650
+# 1/4 inch margins all around (at 600 DPI)
+#top 150
+#bottom 150
+#left 150
+#right 150
+
+
+
diff -up pbm2ppa-0.8.6/pbm2ppa.conf.hp1000.20000205 pbm2ppa-0.8.6/pbm2ppa.conf.hp1000
--- pbm2ppa-0.8.6/pbm2ppa.conf.hp1000.20000205 1998-10-19 02:27:19.000000000 +0100
+++ pbm2ppa-0.8.6/pbm2ppa.conf.hp1000 2008-09-24 15:17:47.000000000 +0100
@@ -1,18 +0,0 @@
-# Sample configuration file for the HP720
-#
-# This file will be automatically read upon startup if it's placed in
-# /etc/pbm2ppa.conf
-#
-
-version 1000
-
-papersize us
-
-xoff 100 # \ Adjust these for your printer.
-yoff -650 # / (see CALIBRATE)
-
-# 1/4 inch margins all around (at 600 DPI)
-top 150
-bottom 150
-left 150
-right 150
diff -up pbm2ppa-0.8.6/pbm2ppa.conf.hp720.20000205 pbm2ppa-0.8.6/pbm2ppa.conf.hp720
--- pbm2ppa-0.8.6/pbm2ppa.conf.hp720.20000205 1998-10-19 02:27:20.000000000 +0100
+++ pbm2ppa-0.8.6/pbm2ppa.conf.hp720 2008-09-24 15:17:47.000000000 +0100
@@ -1,18 +0,0 @@
-# Sample configuration file for the HP720
-#
-# This file will be automatically read upon startup if it's placed in
-# /etc/pbm2ppa.conf
-#
-
-version 720
-
-papersize us
-
-xoff 169 # \ Adjust these for your printer.
-yoff -569 # / (see CALIBRATE)
-
-# 1/4 inch margins all around (at 600 DPI)
-top 150
-bottom 150
-left 150
-right 150
diff -up pbm2ppa-0.8.6/pbm2ppa.conf.hp820.20000205 pbm2ppa-0.8.6/pbm2ppa.conf.hp820
--- pbm2ppa-0.8.6/pbm2ppa.conf.hp820.20000205 1998-10-19 02:27:21.000000000 +0100
+++ pbm2ppa-0.8.6/pbm2ppa.conf.hp820 2008-09-24 15:17:47.000000000 +0100
@@ -1,18 +0,0 @@
-# Sample configuration file for the HP820
-#
-# This file will be automatically read upon startup if it's placed in
-# /etc/pbm2ppa.conf
-#
-
-version 820
-
-papersize us
-
-xoff 75 # \ Adjust these for your printer.
-yoff -500 # / (see CALIBRATE)
-
-# 1/4 inch margins all around (at 600 DPI)
-top 80
-bottom 150
-left 80
-right 80
diff -up pbm2ppa-0.8.6/pbmtpg.c.20000205 pbm2ppa-0.8.6/pbmtpg.c
--- pbm2ppa-0.8.6/pbmtpg.c.20000205 1998-09-16 01:00:28.000000000 +0100
+++ pbm2ppa-0.8.6/pbmtpg.c 2008-09-24 15:15:53.000000000 +0100
@@ -1,13 +1,19 @@
#include <math.h>
#include <stdio.h>
#include <stdlib.h>
+#include <string.h>
-/* Support both US and A4. */
+/* Support US Letter, Legal, and A4. */
-/* US is 8.5 in by 11 in */
+/* US Letter is 8.5 in by 11 in */
-#define USWIDTH (5100)
-#define USHEIGHT (6600)
+#define LETTERWIDTH (5100)
+#define LETTERHEIGHT (6600)
+
+/* US Legal is 8.5 in by 14 in */
+
+#define LEGALWIDTH (5100)
+#define LEGALHEIGHT (8400)
/* A4 is 210 mm by 297 mm == 8.27 in by 11.69 in */
@@ -137,8 +143,24 @@ int main(int argc,char** argv)
char buf[128];
char *progname = *argv;
- Width = USWIDTH;
- Height = USHEIGHT;
+ Width = LETTERWIDTH;
+ Height = LETTERHEIGHT;
+ if(argc>1 && strcmp(argv[1], "-letter")==0)
+ {
+ Width = LETTERWIDTH;
+ Height = LETTERHEIGHT;
+ argc--;
+ argv++;
+ }
+
+ if(argc>1 && strcmp(argv[1], "-legal")==0)
+ {
+ Width = LEGALWIDTH;
+ Height = LEGALHEIGHT;
+ argc--;
+ argv++;
+ }
+
if(argc>1 && strcmp(argv[1], "-a4")==0)
{
Width = A4WIDTH;
@@ -146,6 +168,9 @@ int main(int argc,char** argv)
argc--;
argv++;
}
+
+
+
Pwidth = (Width+7)/8;
bitmap = (char *)malloc(Pwidth*Height);
@@ -192,6 +217,7 @@ int main(int argc,char** argv)
return 1;
}
+ Width = 8*Pwidth ; /* here need 8*Pwidth as the Width ! */
printf("P4\n%d %d\n",Width,Height);
for(x=0; x<Pwidth*Height; x++)
@@ -199,3 +225,10 @@ int main(int argc,char** argv)
return 0;
}
+
+
+
+
+
+
+
diff -up pbm2ppa-0.8.6/README.REDHAT.20000205 pbm2ppa-0.8.6/README.REDHAT
--- pbm2ppa-0.8.6/README.REDHAT.20000205 1998-08-22 14:48:40.000000000 +0100
+++ pbm2ppa-0.8.6/README.REDHAT 2008-09-24 15:15:53.000000000 +0100
@@ -1,12 +1,28 @@
-RedHat users may find the following tip from Panayotis Vryonis <vrypan@hol.gr>
-helpful!
+The best way to integrate support for the HP PPA Printers into RedHat's
+Linux Print System Manager (printtool) is to replace e.g., the
+rhs-printfilters-1.57-3 RPM package that comes with Red Hat 6.1,
+with a PPA-aware version from the pnm2ppa project whic h has a
+homepage at http://www.sourceforge.net/projects/?group_id=1322
-Here is a tip to intergrate HP720C support in RedHat's printtool:
+At the time of writing, the latest release is
+ rhs-printfilters-1.57-4ppa1
+This package includes support for both pbm2ppa and the new
+color driver pnm2ppa.
-Install pbm2ppa. Copy pbm2ppa to /usr/bin.
-Edit "printerdb" (in my system it is found in
-/usr/lib/rhs/rhs-printfilters )
-and append the following lines:
+ -------------------------------------
+
+If for some reason, they cannot use this PPA-aware version of
+rhs-printfilters, RedHat users may still find the following tip from
+Panayotis Vryonis <vrypan@hol.gr> helpful!
+It will work with the standard rhs-printfilters that comes with the
+Red Hat release:
+
+ Here is a tip to integrate HP720C support in RedHat's printtool:
+
+ Install pbm2ppa. Copy pbm2ppa to /usr/bin.
+ Edit "printerdb" (in my system it is found in
+ /usr/lib/rhs/rhs-printfilters )
+ and append the following lines:
----------------------Cut here
-------------------------------------------
StartEntry: DeskJet720C
@@ -23,7 +39,11 @@ StartEntry: DeskJet720C
EndEntry
--------------------------------------------------------------------------
-Now you can add an HP720C printer just like any other, using printtool.
+ Now you can add an HP720C printer just like any other, using printtool.
+
+ [Author's (P. Vryonis) Note: The same should work for the 820 and
+ 1000, but it hasn't been tested. Also, use the pbmraw GSDriver if
+ you have it; it's faster. ]
+
+
-[Author's Note: The same should work for the 820 and 1000, but it hasn't
-been tested. Also, use the pbmraw GSDriver if you have it; it's faster. ]
Reference in New Issue Copy Permalink