.gitignore

@@ -1 +1 @@
-SOURCES/plymouth-1e36e303e08ba425fecbcff4dde22c8ee936638c.tar.bz2
+SOURCES/plymouth-1ea1020.tar.gz

.plymouth.metadata

@@ -1 +1 @@
-7847967f397a536ccf5fb2d43aa561ac5e5dff6c SOURCES/plymouth-1e36e303e08ba425fecbcff4dde22c8ee936638c.tar.bz2
+99c241db2da7e2e2d03acacd58c79b2fa19e13e3 SOURCES/plymouth-1ea1020.tar.gz

SOURCES/0001-Revert-configure-bump-so-name.patch

@@ -0,0 +1,26 @@
+From 696f93e5996634473fb554e07ba2d0775be2a814 Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Tue, 1 Oct 2019 12:11:09 +0200
+Subject: [PATCH] Revert "configure: bump so name"
+
+This reverts commit be27b260042e76aba988b88a4f26983247e02bde.
+---
+ configure.ac | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/configure.ac b/configure.ac
+index 2257374..507145e 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -26,7 +26,7 @@ PKG_PROG_PKG_CONFIG
+ LT_INIT([dlopen disable-static pic-only])
+ 
+ ## increment if the interface has additions, changes, removals.
+-LT_CURRENT=5
++LT_CURRENT=4
+ 
+ ## increment any time the source changes; set to
+ ##  0 if you increment CURRENT
+-- 
+2.23.0
+

SOURCES/0001-details-Don-t-replay-boot-buffer-on-serial-consoles.patch

@@ -0,0 +1,167 @@
+From c42ff26b3dd3afa520946b1e28716055134cab50 Mon Sep 17 00:00:00 2001
+From: Ray Strode <rstrode@redhat.com>
+Date: Tue, 30 Aug 2022 14:41:36 -0400
+Subject: [PATCH] details: Don't replay boot buffer on serial consoles
+
+commit 0e59dde8 changed the details plugin to clear the terminal when
+first opening it. This was done to prevent duplicate messages from
+showing up when toggling back and forth between details and graphical
+splashes.
+
+That has the negative side effect of purging serial console output too
+though. Furthermore, it makes little sense to replay the boot buffer
+on serial consoles, since serial consoles don't aggressively purge
+scrollback like VTs do.
+
+This commit adds a check to make sure the terminal is a VT before trying
+to clear and replay the scrollback buffer.
+
+Closes: https://gitlab.freedesktop.org/plymouth/plymouth/-/issues/187
+---
+ src/plugins/splash/details/plugin.c | 38 ++++++++++++++++++++---------
+ 1 file changed, 27 insertions(+), 11 deletions(-)
+
+diff --git a/src/plugins/splash/details/plugin.c b/src/plugins/splash/details/plugin.c
+index 254f682b..140fb282 100644
+--- a/src/plugins/splash/details/plugin.c
++++ b/src/plugins/splash/details/plugin.c
+@@ -175,109 +175,125 @@ destroy_plugin (ply_boot_splash_plugin_t *plugin)
+                                                        detach_from_event_loop,
+                                                        plugin);
+                 detach_from_event_loop (plugin);
+         }
+ 
+         free_messages (plugin);
+         free_views (plugin);
+ 
+         free (plugin);
+ }
+ 
+ static void
+ detach_from_event_loop (ply_boot_splash_plugin_t *plugin)
+ {
+         plugin->loop = NULL;
+ 
+         ply_trace ("detaching from event loop");
+ }
+ 
+ static void
+ view_write (view_t     *view,
+             const char *text,
+             size_t      number_of_bytes)
+ {
+         ply_terminal_t *terminal;
+ 
+         terminal = ply_text_display_get_terminal (view->display);
+         ply_terminal_write (terminal, "%.*s", (int) number_of_bytes, text);
+ }
+ 
++static void
++view_write_boot_buffer (view_t *view)
++{
++        ply_boot_splash_plugin_t *plugin;
++        ply_terminal_t *terminal;
++
++        plugin = view->plugin;
++
++        terminal = ply_text_display_get_terminal (view->display);
++
++        ply_text_display_clear_screen (view->display);
++        ply_terminal_activate_vt (terminal);
++
++        if (plugin->boot_buffer != NULL) {
++                size_t size;
++                const char *bytes;
++
++                size = ply_buffer_get_size (plugin->boot_buffer);
++                bytes = ply_buffer_get_bytes (plugin->boot_buffer);
++                view_write (view, bytes, size);
++        }
++}
++
+ static void
+ write_on_views (ply_boot_splash_plugin_t *plugin,
+                 const char               *text,
+                 size_t                    number_of_bytes)
+ {
+         ply_list_node_t *node;
+ 
+         if (number_of_bytes == 0)
+                 return;
+ 
+         node = ply_list_get_first_node (plugin->views);
+ 
+         while (node != NULL) {
+                 ply_list_node_t *next_node;
+                 view_t *view;
+ 
+                 view = ply_list_node_get_data (node);
+                 next_node = ply_list_get_next_node (plugin->views, node);
+ 
+                 view_write (view, text, number_of_bytes);
+ 
+                 node = next_node;
+         }
+ }
+ 
+ static void
+ add_text_display (ply_boot_splash_plugin_t *plugin,
+                   ply_text_display_t       *display)
+ {
+         view_t *view;
+         ply_terminal_t *terminal;
+ 
+         view = view_new (plugin, display);
+ 
+         terminal = ply_text_display_get_terminal (view->display);
+-        if (ply_terminal_open (terminal)) {
+-                ply_text_display_clear_screen (view->display);        
+-                ply_terminal_activate_vt (terminal);
+-        }
+ 
+-        ply_list_append_data (plugin->views, view);
++        ply_terminal_open (terminal);
+ 
+-        if (plugin->boot_buffer != NULL) {
+-                size_t size;
+-                const char *bytes;
++        ply_list_append_data (plugin->views, view);
+ 
+-                size = ply_buffer_get_size (plugin->boot_buffer);
+-                bytes = ply_buffer_get_bytes (plugin->boot_buffer);
+-                view_write (view, bytes, size);
++        if (ply_terminal_is_vt (terminal)) {
++                view_write_boot_buffer (view);
+         }
+ }
+ 
+ static void
+ remove_text_display (ply_boot_splash_plugin_t *plugin,
+                      ply_text_display_t       *display)
+ {
+         ply_list_node_t *node;
+ 
+         node = ply_list_get_first_node (plugin->views);
+         while (node != NULL) {
+                 view_t *view;
+                 ply_list_node_t *next_node;
+ 
+                 view = ply_list_node_get_data (node);
+                 next_node = ply_list_get_next_node (plugin->views, node);
+ 
+                 if (view->display == display) {
+                         ply_list_remove_node (plugin->views, node);
+                         return;
+                 }
+ 
+                 node = next_node;
+         }
+ }
+ 
+ static bool
+ show_splash_screen (ply_boot_splash_plugin_t *plugin,
+                     ply_event_loop_t         *loop,
+                     ply_buffer_t             *boot_buffer,
+-- 
+2.41.0.rc2
+

SOURCES/0001-ply-utils-Reintroduce-ply_string_has_prefix-helper.patch

@@ -0,0 +1,158 @@
+From 58161da08c108243d59d58c6c1f9d3c97bb9a3ad Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Mon, 7 Mar 2022 12:25:56 +0100
+Subject: [PATCH 1/6] ply-utils: Reintroduce ply_string_has_prefix helper
+
+ply_string_has_prefix was dropped in commit c7965ea19abf ("ply-utils:
+Drop unused ply_string_has_prefix helper"). We have a need for this
+helper again, so reintroduce it.
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+ src/libply/ply-utils.c | 9 +++++++++
+ src/libply/ply-utils.h | 1 +
+ 2 files changed, 10 insertions(+)
+
+diff --git a/src/libply/ply-utils.c b/src/libply/ply-utils.c
+index f90ac40..f457579 100644
+--- a/src/libply/ply-utils.c
++++ b/src/libply/ply-utils.c
+@@ -432,60 +432,69 @@ ply_copy_string_array (const char *const *array)
+         int i;
+ 
+         for (i = 0; array[i] != NULL; i++) {
+         }
+ 
+         copy = calloc (i + 1, sizeof(char *));
+ 
+         for (i = 0; array[i] != NULL; i++) {
+                 copy[i] = strdup (array[i]);
+         }
+ 
+         return copy;
+ }
+ 
+ void
+ ply_free_string_array (char **array)
+ {
+         int i;
+ 
+         if (array == NULL)
+                 return;
+ 
+         for (i = 0; array[i] != NULL; i++) {
+                 free (array[i]);
+                 array[i] = NULL;
+         }
+ 
+         free (array);
+ }
+ 
++bool
++ply_string_has_prefix (const char *str, const char *prefix)
++{
++        if (str == NULL || prefix == NULL)
++                return false;
++
++        return strncmp (str, prefix, strlen (prefix)) == 0;
++}
++
+ double
+ ply_get_timestamp (void)
+ {
+         const double nanoseconds_per_second = 1000000000.0;
+         double timestamp;
+         struct timespec now = { 0L, /* zero-filled */ };
+ 
+         clock_gettime (CLOCK_MONOTONIC, &now);
+         timestamp = ((nanoseconds_per_second * now.tv_sec) + now.tv_nsec) /
+                     nanoseconds_per_second;
+ 
+         return timestamp;
+ }
+ 
+ void
+ ply_save_errno (void)
+ {
+         assert (errno_stack_position < PLY_ERRNO_STACK_SIZE);
+         errno_stack[errno_stack_position] = errno;
+         errno_stack_position++;
+ }
+ 
+ void
+ ply_restore_errno (void)
+ {
+         assert (errno_stack_position > 0);
+         errno_stack_position--;
+         errno = errno_stack[errno_stack_position];
+ }
+ 
+diff --git a/src/libply/ply-utils.h b/src/libply/ply-utils.h
+index d7b7622..b4565c3 100644
+--- a/src/libply/ply-utils.h
++++ b/src/libply/ply-utils.h
+@@ -56,60 +56,61 @@ typedef enum
+ #ifndef PLY_HIDE_FUNCTION_DECLARATIONS
+ 
+ #define ply_round_to_multiple(n, m) (((n) + (((m) - 1))) & ~((m) - 1))
+ 
+ bool ply_open_unidirectional_pipe (int *sender_fd,
+                                    int *receiver_fd);
+ int ply_connect_to_unix_socket (const char            *path,
+                                 ply_unix_socket_type_t type);
+ int ply_listen_to_unix_socket (const char            *path,
+                                ply_unix_socket_type_t type);
+ bool ply_get_credentials_from_fd (int    fd,
+                                   pid_t *pid,
+                                   uid_t *uid,
+                                   gid_t *gid);
+ 
+ bool ply_write (int         fd,
+                 const void *buffer,
+                 size_t      number_of_bytes);
+ bool ply_write_uint32 (int      fd,
+                        uint32_t value);
+ bool ply_read (int    fd,
+                void  *buffer,
+                size_t number_of_bytes);
+ bool ply_read_uint32 (int       fd,
+                       uint32_t *value);
+ 
+ bool ply_fd_has_data (int fd);
+ bool ply_set_fd_as_blocking (int fd);
+ char **ply_copy_string_array (const char *const *array);
+ void ply_free_string_array (char **array);
++bool ply_string_has_prefix (const char *str, const char *prefix);
+ double ply_get_timestamp (void);
+ 
+ void ply_save_errno (void);
+ void ply_restore_errno (void);
+ 
+ bool ply_directory_exists (const char *dir);
+ bool ply_file_exists (const char *file);
+ bool ply_character_device_exists (const char *device);
+ 
+ ply_module_handle_t *ply_open_module (const char *module_path);
+ ply_module_handle_t *ply_open_built_in_module (void);
+ 
+ ply_module_function_t ply_module_look_up_function (ply_module_handle_t *handle,
+                                                    const char          *function_name);
+ void ply_close_module (ply_module_handle_t *handle);
+ 
+ bool ply_create_directory (const char *directory);
+ bool ply_create_file_link (const char *source,
+                            const char *destination);
+ void ply_show_new_kernel_messages (bool should_show);
+ 
+ ply_daemon_handle_t *ply_create_daemon (void);
+ bool ply_detach_daemon (ply_daemon_handle_t *handle,
+                         int                  exit_code);
+ 
+ int ply_utf8_character_get_size (const char *string,
+                                  size_t      n);
+ int ply_utf8_string_get_length (const char *string,
+                                 size_t      n);
+ 
+-- 
+2.37.0.rc1
+

SOURCES/0001-src-die-during-shutdown-with-everything-else.patch

@@ -1,871 +0,0 @@
-From f55051678452647e035853ee94a89cb54ea2aa4a Mon Sep 17 00:00:00 2001
-From: Ray Strode <rstrode@redhat.com>
-Date: Fri, 17 Jul 2020 16:06:44 -0400
-Subject: [PATCH] src: die during shutdown with everything else
-
-plymouthd currently avoids getting killed at shutdown.  This causes
-filesystems to fail to remount read-only in some cases.
-
-This commit changes things up so that plymouthd dies with everyone else,
-but spawns a process to hold open the drm device that can keep the splash
-up until the very end.
-
-In order to keep this process alive until the very end, it gets run
-from within the initramfs (if available).  This requires adding service
-files to jump back into the initramfs at shutdown
----
- configure.ac                                  |  1 +
- scripts/plymouth-populate-initrd.in           |  2 +
- src/Makefile.am                               |  7 +++
- src/main.c                                    | 11 +++-
- src/plugins/renderers/drm/Makefile.am         |  3 +-
- src/plugins/renderers/drm/plugin.c            | 62 +++++++++++++++++++
- src/plymouthd-drm-escrow.c                    | 18 ++++++
- systemd-units/Makefile.am                     | 28 ++++++---
- systemd-units/plymouth-halt.service.in        |  1 +
- systemd-units/plymouth-poweroff.service.in    |  1 +
- systemd-units/plymouth-reboot.service.in      |  1 +
- .../plymouth-switch-root-initramfs.service.in | 12 ++++
- 12 files changed, 134 insertions(+), 13 deletions(-)
- create mode 100644 src/plymouthd-drm-escrow.c
- create mode 100644 systemd-units/plymouth-switch-root-initramfs.service.in
-
-diff --git a/configure.ac b/configure.ac
-index 970e19f..1dc8cdb 100644
---- a/configure.ac
-+++ b/configure.ac
-@@ -319,36 +319,37 @@ AC_CONFIG_FILES([Makefile po/Makefile.in
-            src/plugins/controls/label/Makefile
-            src/Makefile
-            src/client/ply-boot-client.pc
-            src/client/Makefile
-            src/upstart-bridge/Makefile
-            themes/Makefile
-            themes/spinfinity/Makefile
-            themes/fade-in/Makefile
-            themes/tribar/Makefile
-            themes/text/Makefile
-            themes/details/Makefile
-            themes/solar/Makefile
-            themes/glow/Makefile
-            themes/spinner/Makefile
-            themes/script/Makefile
-            themes/bgrt/Makefile
-            images/Makefile
- 	   scripts/plymouth-generate-initrd
- 	   scripts/plymouth-populate-initrd
- 	   scripts/plymouth-set-default-theme
-            scripts/Makefile
-            systemd-units/plymouth-halt.service
-            systemd-units/plymouth-kexec.service
-            systemd-units/plymouth-poweroff.service
-            systemd-units/plymouth-quit.service
-            systemd-units/plymouth-quit-wait.service
-            systemd-units/plymouth-read-write.service
-            systemd-units/plymouth-reboot.service
-            systemd-units/plymouth-start.service
-            systemd-units/plymouth-switch-root.service
-+           systemd-units/plymouth-switch-root-initramfs.service
-            systemd-units/systemd-ask-password-plymouth.path
-            systemd-units/systemd-ask-password-plymouth.service
-            systemd-units/Makefile
-            docs/Makefile
- ])
- AC_OUTPUT
-diff --git a/scripts/plymouth-populate-initrd.in b/scripts/plymouth-populate-initrd.in
-index 60fd063..535a896 100755
---- a/scripts/plymouth-populate-initrd.in
-+++ b/scripts/plymouth-populate-initrd.in
-@@ -1,54 +1,55 @@
- #!/bin/bash
- #
- # inst bits ruthlessly and viciously stolen from dracut
- 
- [ -z "$DESTDIR" ] || exit 0
- 
- # For running on a (cross-compiled) sysroot, the following
- # settings are needed:
- # PLYMOUTH_SYSROOT - the sysroot directory
- # PLYMOUTH_LDD - an optional ldd command that works on foreign binaries
- # PLYMOUTH_LDD_PATH - optional PATH ldd is run with
- 
- [ -z "$PLYMOUTH_LDD" ] && PLYMOUTH_LDD="ldd"
- [ -z "$PLYMOUTH_LDD_PATH" ] && PLYMOUTH_LDD_PATH="$PATH"
- [ -z "$PLYMOUTH_LIBEXECDIR" ] && PLYMOUTH_LIBEXECDIR="@PLYMOUTH_LIBEXECDIR@"
- [ -z "$PLYMOUTH_DATADIR" ] && PLYMOUTH_DATADIR="@PLYMOUTH_DATADIR@"
- [ -z "$PLYMOUTH_PLUGIN_PATH" ] && PLYMOUTH_PLUGIN_PATH="$(plymouth --get-splash-plugin-path)"
- [ -z "$PLYMOUTH_LOGO_FILE" ] && PLYMOUTH_LOGO_FILE="@PLYMOUTH_LOGO_FILE@"
- [ -n "$PLYMOUTH_THEME_NAME" ] && THEME_OVERRIDE=1
- [ -z "$PLYMOUTH_THEME_NAME" ] && PLYMOUTH_THEME_NAME=$(plymouth-set-default-theme)
- [ -z "$PLYMOUTH_CONFDIR" ] && PLYMOUTH_CONFDIR="@PLYMOUTH_CONF_DIR@"
- [ -z "$PLYMOUTH_POLICYDIR" ] && PLYMOUTH_POLICYDIR="@PLYMOUTH_POLICY_DIR@"
- [ -z "$PLYMOUTH_DAEMON_PATH" ] && PLYMOUTH_DAEMON_PATH="@PLYMOUTH_DAEMON_DIR@/plymouthd"
- [ -z "$PLYMOUTH_CLIENT_PATH" ] && PLYMOUTH_CLIENT_PATH="@PLYMOUTH_CLIENT_DIR@/plymouth"
-+[ -z "$PLYMOUTH_DRM_ESCROW_PATH" ] && PLYMOUTH_DRM_ESCROW_PATH="@PLYMOUTH_LIBEXECDIR@/plymouth/plymouth-drm-escrow"
- [ -z "$SYSTEMD_UNIT_DIR" ] && SYSTEMD_UNIT_DIR="@SYSTEMD_UNIT_DIR@"
- [ -z "$SUPPORTED_LANGUAGES" ] && SUPPORTED_LANGUAGES="pt fr de it ru es en zh ja ko zh as bn gu hi kn ml mr or pa ta te"
- 
- # Generic substring function.  If $2 is in $1, return 0.
- strstr() { [ "${1#*$2*}" != "$1" ]; }
- 
- ddebug() {
-     [ "$verbose" = "true" ] && echo "$@"
- }
- 
- # normalize_path <path>
- # Prints the normalized path, where it removes any duplicated
- # and trailing slashes.
- # Example:
- # $ normalize_path ///test/test//
- # /test/test
- normalize_path() {
-     shopt -q -s extglob
-     set -- "${1//+(\/)//}"
-     shopt -q -u extglob
-     echo "${1%/}"
- }
- 
- # convert_abs_rel <from> <to>
- # Prints the relative path, when creating a symlink to <to> from <from>.
- # Example:
- # $ convert_abs_rel /usr/bin/test /bin/test-2
- # ../../bin/test-2
- # $ ln -s $(convert_abs_rel /usr/bin/test /bin/test-2) /usr/bin/test
- convert_abs_rel() {
-@@ -390,60 +391,61 @@ verbose=false
- INITRDDIR=""
- while [ $# -gt 0 ]; do
-     case $1 in
-         --verbose|-v)
-             verbose=true
-             ;;
-         --targetdir|-t)
-             shift
-             INITRDDIR="$1"
-             ;;
-         --help|-h)
-             usage normal
-             ;;
-         *)
-             usage error
-             break
-             ;;
-     esac
-     shift
- done
- 
- [ -z "$INITRDDIR" ] && usage error
- 
- ddebug "Running with PLYMOUTH_SYSROOT=$PLYMOUTH_SYSROOT"
- ddebug "Running with PLYMOUTH_LDD=$PLYMOUTH_LDD"
- ddebug "Running with PLYMOUTH_LDD_PATH=$PLYMOUTH_LDD_PATH"
- 
- mkdir -p ${INITRDDIR}${PLYMOUTH_DATADIR}/plymouth/themes
- inst ${PLYMOUTH_DAEMON_PATH} $INITRDDIR
- inst ${PLYMOUTH_CLIENT_PATH} $INITRDDIR
-+inst ${PLYMOUTH_DRM_ESCROW_PATH} $INITRDDIR
- inst ${PLYMOUTH_DATADIR}/plymouth/themes/text/text.plymouth $INITRDDIR
- inst ${PLYMOUTH_PLUGIN_PATH}/text.so $INITRDDIR
- inst ${PLYMOUTH_DATADIR}/plymouth/themes/details/details.plymouth $INITRDDIR
- inst ${PLYMOUTH_PLUGIN_PATH}/details.so $INITRDDIR
- inst ${PLYMOUTH_LOGO_FILE} $INITRDDIR
- inst @RELEASE_FILE@ $INITRDDIR
- inst ${PLYMOUTH_POLICYDIR}/plymouthd.defaults $INITRDDIR
- inst ${PLYMOUTH_CONFDIR}/plymouthd.conf $INITRDDIR
- 
- if [ -z "$PLYMOUTH_THEME_NAME" ]; then
-     echo "No default plymouth plugin is set" >&2
-     exit 1
- fi
- 
- if [ $THEME_OVERRIDE ]; then
-     conf=$INITRDDIR/${PLYMOUTH_CONFDIR}/plymouthd.conf
-     echo "modifying plymouthd.conf: Theme=$PLYMOUTH_THEME_NAME" >&2
-     # make sure the section and key exist so we can modify them
-     grep -q "^ *\[Daemon\]" $conf || echo "[Daemon]" >> $conf
-     grep -q "^ *Theme *=" $conf || echo "Theme=fade-in" >> $conf
-     sed -i "s/^ *Theme *=.*/# theme modified by plymouth-populate-initrd\nTheme=$PLYMOUTH_THEME_NAME/" $conf
- fi
- 
- PLYMOUTH_MODULE_NAME=$(grep "ModuleName *= *" ${PLYMOUTH_SYSROOT}${PLYMOUTH_DATADIR}/plymouth/themes/${PLYMOUTH_THEME_NAME}/${PLYMOUTH_THEME_NAME}.plymouth | sed 's/ModuleName *= *//')
- PLYMOUTH_THEME_DIR="${PLYMOUTH_DATADIR}/plymouth/themes/${PLYMOUTH_THEME_NAME}"
- PLYMOUTH_IMAGE_DIR=$(grep "ImageDir *= *" ${PLYMOUTH_SYSROOT}${PLYMOUTH_THEME_DIR}/${PLYMOUTH_THEME_NAME}.plymouth | sed 's/ImageDir *= *//')
- 
- if [ ! -f ${PLYMOUTH_SYSROOT}${PLYMOUTH_PLUGIN_PATH}/${PLYMOUTH_MODULE_NAME}.so ]; then
-     echo "The default plymouth plugin (${PLYMOUTH_MODULE_NAME}) doesn't exist" >&2
-     exit 1
-diff --git a/src/Makefile.am b/src/Makefile.am
-index 95ed019..78f3f78 100644
---- a/src/Makefile.am
-+++ b/src/Makefile.am
-@@ -1,52 +1,59 @@
- SUBDIRS = libply libply-splash-core libply-splash-graphics . plugins client
- if ENABLE_UPSTART_MONITORING
- SUBDIRS += upstart-bridge
- endif
- AM_CPPFLAGS = -I$(top_srcdir)                                                 \
-            -I$(srcdir)/libply                                                 \
-            -I$(srcdir)/libply-splash-core                                     \
-            -I$(srcdir)                                                        \
-+           -DPLYMOUTH_DRM_ESCROW_DIRECTORY=\"$(libexecdir)/plymouth\"         \
-            -DPLYMOUTH_LOG_DIRECTORY=\"$(localstatedir)/log\"                  \
-            -DPLYMOUTH_SPOOL_DIRECTORY=\"$(localstatedir)/spool/plymouth\"     \
-            -DPLYMOUTH_TIME_DIRECTORY=\"$(localstatedir)/lib/plymouth/\"       \
-            -DPLYMOUTH_LOGO_FILE=\"$(logofile)\"
- 
- plymouthdbindir = $(plymouthdaemondir)
- plymouthdbin_PROGRAMS = plymouthd
- 
- plymouthd_CFLAGS = $(PLYMOUTH_CFLAGS)                                         \
- 		   -rdynamic                                                  \
- 		   -DPLYMOUTH_PLUGIN_PATH=\"$(PLYMOUTH_PLUGIN_PATH)\"         \
- 		   -DPLYMOUTH_THEME_PATH=\"$(PLYMOUTH_THEME_PATH)/\"          \
- 		   -DPLYMOUTH_POLICY_DIR=\"$(PLYMOUTH_POLICY_DIR)/\"          \
- 		   -DPLYMOUTH_RUNTIME_DIR=\"$(PLYMOUTH_RUNTIME_DIR)\"         \
- 		   -DPLYMOUTH_CONF_DIR=\"$(PLYMOUTH_CONF_DIR)/\"              \
- 		   -DPLYMOUTH_RUNTIME_THEME_PATH=\"$(PLYMOUTH_RUNTIME_THEME_PATH)/\"
- plymouthd_LDADD = $(PLYMOUTH_LIBS) libply/libply.la libply-splash-core/libply-splash-core.la
- plymouthd_SOURCES =                                                            \
-                    ply-boot-protocol.h                                        \
-                    ply-boot-server.h                                          \
-                    ply-boot-server.c                                          \
-                    plugins/splash/details/plugin.c                  \
-                    main.c
- 
-+escrowdir = $(libexecdir)/plymouth
-+escrow_PROGRAMS = plymouthd-drm-escrow
-+
-+plymouthd_drm_escrow_LDFLAGS = -all-static
-+plymouthd_drm_escrow_SOURCES = plymouthd-drm-escrow.c
-+
- plymouthdrundir = $(localstatedir)/run/plymouth
- plymouthdspooldir = $(localstatedir)/spool/plymouth
- plymouthdtimedir = $(localstatedir)/lib/plymouth
- 
- pkgconfigdir = $(libdir)/pkgconfig
- pkgconfig_DATA = ply-splash-core.pc ply-splash-graphics.pc
- 
- plymouthd_defaultsdir = $(PLYMOUTH_POLICY_DIR)
- dist_plymouthd_defaults_DATA = plymouthd.defaults
- 
- plymouthd_confdir = $(PLYMOUTH_CONF_DIR)
- dist_plymouthd_conf_DATA = plymouthd.conf
- 
- install-data-hook:
- 	-mkdir -p $(DESTDIR)$(plymouthdrundir)
- 	-mkdir -p $(DESTDIR)$(plymouthdspooldir)
- 	-mkdir -p $(DESTDIR)$(plymouthdtimedir)
- 
- EXTRA_DIST = ply-splash-core.pc.in ply-splash-graphics.pc.in
- MAINTAINERCLEANFILES = Makefile.in
-diff --git a/src/main.c b/src/main.c
-index 8848ad0..8372f2f 100644
---- a/src/main.c
-+++ b/src/main.c
-@@ -2181,65 +2181,70 @@ main (int    argc,
- 
-                 if (daemon_handle == NULL) {
-                         ply_error ("plymouthd: cannot daemonize: %m");
-                         return EX_UNAVAILABLE;
-                 }
-         }
- 
-         if (debug)
-                 debug_buffer = ply_buffer_new ();
- 
-         signal (SIGABRT, on_crash);
-         signal (SIGSEGV, on_crash);
- 
-         /* before do anything we need to make sure we have a working
-          * environment.
-          */
-         if (!initialize_environment (&state)) {
-                 if (errno == 0) {
-                         if (daemon_handle != NULL)
-                                 ply_detach_daemon (daemon_handle, 0);
-                         return 0;
-                 }
- 
-                 ply_error ("plymouthd: could not setup basic operating environment: %m");
-                 if (daemon_handle != NULL)
-                         ply_detach_daemon (daemon_handle, EX_OSERR);
-                 return EX_OSERR;
-         }
- 
-         /* Make the first byte in argv be '@' so that we can survive systemd's killing
--         * spree when going from initrd to /, and so we stay alive all the way until
--         * the power is killed at shutdown.
-+         * spree when going from initrd to /
-          * http://www.freedesktop.org/wiki/Software/systemd/RootStorageDaemons
-+         *
-+         * If the system is shutting down, we let systemd slay us because otherwise we
-+         * may prevent the root fs from getting remounted read-only.
-          */
--        argv[0][0] = '@';
-+        if (state.mode != PLY_BOOT_SPLASH_MODE_SHUTDOWN &&
-+	    state.mode != PLY_BOOT_SPLASH_MODE_REBOOT) {
-+                argv[0][0] = '@';
-+        }
- 
-         state.boot_server = start_boot_server (&state);
- 
-         if (state.boot_server == NULL) {
-                 ply_trace ("plymouthd is already running");
- 
-                 if (daemon_handle != NULL)
-                         ply_detach_daemon (daemon_handle, EX_OK);
-                 return EX_OK;
-         }
- 
-         state.boot_buffer = ply_buffer_new ();
- 
-         if (attach_to_session) {
-                 state.should_be_attached = attach_to_session;
-                 if (!attach_to_running_session (&state)) {
-                         ply_trace ("could not redirect console session: %m");
-                         if (!no_daemon)
-                                 ply_detach_daemon (daemon_handle, EX_UNAVAILABLE);
-                         return EX_UNAVAILABLE;
-                 }
-         }
- 
-         state.progress = ply_progress_new ();
-         state.splash_delay = NAN;
-         state.device_timeout = NAN;
- 
-         ply_progress_load_cache (state.progress,
-                                  get_cache_file_for_mode (state.mode));
- 
-diff --git a/src/plugins/renderers/drm/Makefile.am b/src/plugins/renderers/drm/Makefile.am
-index 271b17f..22a819b 100644
---- a/src/plugins/renderers/drm/Makefile.am
-+++ b/src/plugins/renderers/drm/Makefile.am
-@@ -1,23 +1,24 @@
- if ENABLE_DRM_RENDERER
- AM_CPPFLAGS = -I$(top_srcdir)                                                 \
-            -I$(srcdir)/../../../libply                                        \
-            -I$(srcdir)/../../../libply-splash-core                            \
-            -I$(srcdir)/../../..                                               \
-            -I$(srcdir)/../..                                                  \
-            -I$(srcdir)/..                                                     \
--           -I$(srcdir)
-+           -I$(srcdir)                                                        \
-+           -DPLYMOUTH_DRM_ESCROW_DIRECTORY=\"$(libexecdir)/plymouth\"
- 
- plugindir = $(libdir)/plymouth/renderers
- plugin_LTLIBRARIES = drm.la
- 
- drm_la_CFLAGS = $(PLYMOUTH_CFLAGS) $(DRM_CFLAGS)
- 
- drm_la_LDFLAGS = -module -avoid-version -export-dynamic
- drm_la_LIBADD = $(PLYMOUTH_LIBS) $(DRM_LIBS)                                  \
-                          ../../../libply/libply.la                            \
-                          ../../../libply-splash-core/libply-splash-core.la
- drm_la_SOURCES = $(srcdir)/plugin.c
- 
- endif
- 
- MAINTAINERCLEANFILES = Makefile.in
-diff --git a/src/plugins/renderers/drm/plugin.c b/src/plugins/renderers/drm/plugin.c
-index 4dbf8da..38bae36 100644
---- a/src/plugins/renderers/drm/plugin.c
-+++ b/src/plugins/renderers/drm/plugin.c
-@@ -131,73 +131,79 @@ typedef struct
-         bool connected;
-         bool uses_hw_rotation;
- } ply_output_t;
- 
- struct _ply_renderer_backend
- {
-         ply_event_loop_t                *loop;
-         ply_terminal_t                  *terminal;
- 
-         int                              device_fd;
-         char                            *device_name;
-         drmModeRes                      *resources;
- 
-         ply_renderer_input_source_t      input_source;
-         ply_list_t                      *heads;
-         ply_hashtable_t                 *heads_by_controller_id;
- 
-         ply_hashtable_t                 *output_buffers;
- 
-         ply_output_t                    *outputs;
-         int                              outputs_len;
-         int                              connected_count;
- 
-         int32_t                          dither_red;
-         int32_t                          dither_green;
-         int32_t                          dither_blue;
- 
-         uint32_t                         is_active : 1;
-         uint32_t        requires_explicit_flushing : 1;
-         uint32_t                use_preferred_mode : 1;
-+        uint32_t          watching_for_termination : 1;
- 
-         int                              panel_width;
-         int                              panel_height;
-         ply_pixel_buffer_rotation_t      panel_rotation;
-         int                              panel_scale;
- };
- 
- ply_renderer_plugin_interface_t *ply_renderer_backend_get_interface (void);
- static bool open_input_source (ply_renderer_backend_t      *backend,
-                                ply_renderer_input_source_t *input_source);
- static void flush_head (ply_renderer_backend_t *backend,
-                         ply_renderer_head_t    *head);
- 
-+static void close_device (ply_renderer_backend_t *backend);
-+
-+static void watch_for_termination (ply_renderer_backend_t *backend);
-+static void stop_watching_for_termination (ply_renderer_backend_t *backend);
-+
- /* A small helper to determine if we should try to keep the current mode
-  * or pick the best mode ourselves, we keep the current mode only if the
-  * user specified a specific mode using video= on the commandline.
-  */
- static bool
- should_use_preferred_mode (void)
- {
-         bool use_preferred_mode = true;
- 
-         if (ply_kernel_command_line_get_string_after_prefix ("video="))
-                 use_preferred_mode = false;
- 
-         ply_trace ("should_use_preferred_mode: %d", use_preferred_mode);
- 
-         return use_preferred_mode;
- }
- 
- static bool
- ply_renderer_buffer_map (ply_renderer_backend_t *backend,
-                          ply_renderer_buffer_t  *buffer)
- {
-         struct drm_mode_map_dumb map_dumb_buffer_request;
-         void *map_address;
- 
-         if (buffer->map_address != MAP_FAILED) {
-                 buffer->map_count++;
-                 return true;
-         }
- 
-         memset (&map_dumb_buffer_request, 0, sizeof(struct drm_mode_map_dumb));
-@@ -918,158 +924,214 @@ static void
- destroy_backend (ply_renderer_backend_t *backend)
- {
-         ply_trace ("destroying renderer backend for device %s", backend->device_name);
-         free_heads (backend);
- 
-         free (backend->device_name);
-         ply_hashtable_free (backend->output_buffers);
-         ply_hashtable_free (backend->heads_by_controller_id);
- 
-         free (backend->outputs);
-         free (backend);
- }
- 
- static void
- activate (ply_renderer_backend_t *backend)
- {
-         ply_renderer_head_t *head;
-         ply_list_node_t *node;
- 
-         ply_trace ("taking master and scanning out");
-         backend->is_active = true;
- 
-         drmSetMaster (backend->device_fd);
-         node = ply_list_get_first_node (backend->heads);
-         while (node != NULL) {
-                 head = (ply_renderer_head_t *) ply_list_node_get_data (node);
-                 /* Flush out any pending drawing to the buffer */
-                 flush_head (backend, head);
-                 node = ply_list_get_next_node (backend->heads, node);
-         }
-+
-+        watch_for_termination (backend);
- }
- 
- static void
- deactivate (ply_renderer_backend_t *backend)
- {
-         ply_trace ("dropping master");
-         drmDropMaster (backend->device_fd);
-         backend->is_active = false;
-+
-+        stop_watching_for_termination (backend);
- }
- 
- static void
- on_active_vt_changed (ply_renderer_backend_t *backend)
- {
-         if (ply_terminal_is_active (backend->terminal)) {
-                 ply_trace ("activating on vt change");
-                 activate (backend);
-         } else {
-                 ply_trace ("deactivating on vt change");
-                 deactivate (backend);
-         }
- }
- 
- static bool
- load_driver (ply_renderer_backend_t *backend)
- {
-         int device_fd;
- 
-         ply_trace ("Opening '%s'", backend->device_name);
-         device_fd = open (backend->device_name, O_RDWR);
- 
-         if (device_fd < 0) {
-                 ply_trace ("open failed: %m");
-                 return false;
-         }
- 
-         backend->device_fd = device_fd;
- 
-         drmDropMaster (device_fd);
- 
-         return true;
- }
- 
- static void
- unload_backend (ply_renderer_backend_t *backend)
- {
-         if (backend == NULL)
-                 return;
- 
-         ply_trace ("unloading backend");
- 
-         if (backend->device_fd >= 0) {
-                 drmClose (backend->device_fd);
-                 backend->device_fd = -1;
-         }
- 
-         destroy_backend (backend);
-         backend = NULL;
- 
- }
- 
-+static void
-+on_term_signal (ply_renderer_backend_t *backend)
-+{
-+        pid_t pid;
-+
-+        ply_trace ("got SIGTERM, launching drm escrow to protect splash, and dying");
-+
-+        pid = fork();
-+
-+        if (pid == 0) {
-+                const char *argv[] = { PLYMOUTH_DRM_ESCROW_DIRECTORY "/plymouthd-drm-escrow", NULL };
-+
-+                dup (backend->device_fd);
-+                execve (argv[0], (char * const *) argv, NULL);
-+
-+		ply_trace ("could not launch drm escrow process: %m");
-+
-+                _exit (1);
-+        }
-+
-+
-+	close_device (backend);
-+
-+        exit (0);
-+}
-+
-+static void
-+watch_for_termination (ply_renderer_backend_t *backend)
-+{
-+        if (backend->watching_for_termination)
-+                return;
-+
-+	ply_trace ("watching for termination signal");
-+        ply_event_loop_watch_signal (backend->loop, SIGTERM, (ply_event_handler_t) on_term_signal, backend);
-+        backend->watching_for_termination = true;
-+}
-+
-+static void
-+stop_watching_for_termination (ply_renderer_backend_t *backend)
-+{
-+        if (!backend->watching_for_termination)
-+                return;
-+
-+	ply_trace ("stopping watching for termination signal");
-+        ply_event_loop_stop_watching_signal (backend->loop, SIGTERM);
-+        backend->watching_for_termination = false;
-+}
-+
- static bool
- open_device (ply_renderer_backend_t *backend)
- {
-         assert (backend != NULL);
-         assert (backend->device_name != NULL);
- 
-         if (!load_driver (backend))
-                 return false;
- 
-         if (backend->terminal == NULL)
-                 return true;
- 
-         if (!ply_terminal_open (backend->terminal)) {
-                 ply_trace ("could not open terminal: %m");
-                 return false;
-         }
- 
-         if (!ply_terminal_is_vt (backend->terminal)) {
-                 ply_trace ("terminal is not a VT");
-                 ply_terminal_close (backend->terminal);
-                 return false;
-         }
- 
-         ply_terminal_watch_for_active_vt_change (backend->terminal,
-                                                  (ply_terminal_active_vt_changed_handler_t)
-                                                  on_active_vt_changed,
-                                                  backend);
- 
-+        watch_for_termination (backend);
-+
-         return true;
- }
- 
- static void
- close_device (ply_renderer_backend_t *backend)
- {
-         ply_trace ("closing device");
- 
-         free_heads (backend);
- 
-+        stop_watching_for_termination (backend);
-+
-         if (backend->terminal != NULL) {
-                 ply_terminal_stop_watching_for_active_vt_change (backend->terminal,
-                                                                  (ply_terminal_active_vt_changed_handler_t)
-                                                                  on_active_vt_changed,
-                                                                  backend);
-         }
- 
-         unload_backend (backend);
- }
- 
- static void
- output_get_controller_info (ply_renderer_backend_t *backend,
-                             drmModeConnector       *connector,
-                             ply_output_t           *output)
- {
-         int i;
-         drmModeEncoder *encoder;
- 
-         assert (backend != NULL);
- 
-         output->possible_controllers = 0xffffffff;
- 
-         for (i = 0; i < connector->count_encoders; i++) {
-                 encoder = drmModeGetEncoder (backend->device_fd,
-                                              connector->encoders[i]);
- 
-                 if (encoder == NULL)
-                         continue;
- 
-                 if (encoder->encoder_id == connector->encoder_id && encoder->crtc_id) {
-diff --git a/src/plymouthd-drm-escrow.c b/src/plymouthd-drm-escrow.c
-new file mode 100644
-index 0000000..9097db9
---- /dev/null
-+++ b/src/plymouthd-drm-escrow.c
-@@ -0,0 +1,18 @@
-+#include <signal.h>
-+#include <unistd.h>
-+
-+int
-+main(int argc, char **argv)
-+{
-+	signal (SIGTERM, SIG_IGN);
-+
-+        /* Make the first byte in argv be '@' so that we can survive systemd's killing
-+         * spree until the power is killed at shutdown.
-+         * http://www.freedesktop.org/wiki/Software/systemd/RootStorageDaemons
-+         */
-+        argv[0][0] = '@';
-+
-+        while (pause());
-+
-+        return 0;
-+}
-diff --git a/systemd-units/Makefile.am b/systemd-units/Makefile.am
-index b1d843b..bfede17 100644
---- a/systemd-units/Makefile.am
-+++ b/systemd-units/Makefile.am
-@@ -1,78 +1,88 @@
- systemd_unit_templates =                                                     \
-         plymouth-switch-root.service.in                                      \
-+        plymouth-switch-root-initramfs.service.in                            \
-         plymouth-start.service.in                                            \
-         plymouth-read-write.service.in                                       \
-         plymouth-quit.service.in                                             \
-         plymouth-quit-wait.service.in                                        \
-         plymouth-reboot.service.in                                           \
-         plymouth-kexec.service.in                                            \
-         plymouth-poweroff.service.in                                         \
-         plymouth-halt.service.in                                             \
-         systemd-ask-password-plymouth.path.in                                \
-         systemd-ask-password-plymouth.service.in
- 
- if ENABLE_SYSTEMD_INTEGRATION
- systemdunitdir=$(SYSTEMD_UNIT_DIR)
- systemdunit_DATA = $(systemd_unit_templates:.in=)
- 
- install-data-hook:
- 	$(MKDIR_P) -m 0755                                                   \
- 		$(DESTDIR)$(SYSTEMD_UNIT_DIR)/initrd-switch-root.target.wants\
- 		$(DESTDIR)$(SYSTEMD_UNIT_DIR)/sysinit.target.wants           \
- 		$(DESTDIR)$(SYSTEMD_UNIT_DIR)/multi-user.target.wants        \
- 		$(DESTDIR)$(SYSTEMD_UNIT_DIR)/reboot.target.wants            \
- 		$(DESTDIR)$(SYSTEMD_UNIT_DIR)/kexec.target.wants             \
- 		$(DESTDIR)$(SYSTEMD_UNIT_DIR)/poweroff.target.wants          \
- 		$(DESTDIR)$(SYSTEMD_UNIT_DIR)/halt.target.wants
- 	(cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/initrd-switch-root.target.wants && \
- 		rm -f plymouth-start.service plymouth-switch-root.service && \
- 		$(LN_S) ../plymouth-start.service &&                         \
- 		$(LN_S) ../plymouth-switch-root.service)
- 	(cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/sysinit.target.wants &&            \
- 		rm -f plymouth-start.service plymouth-read-write.service &&  \
- 		$(LN_S) ../plymouth-start.service &&                         \
- 		$(LN_S) ../plymouth-read-write.service)
- 	(cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/multi-user.target.wants &&         \
- 		rm -f plymouth-quit.service plymouth-quit-wait.service &&    \
- 		$(LN_S) ../plymouth-quit.service &&                          \
- 		$(LN_S) ../plymouth-quit-wait.service)
- 	(cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/reboot.target.wants &&             \
--		rm -f plymouth-reboot.service &&                             \
--		$(LN_S) ../plymouth-reboot.service)
-+		rm -f plymouth-reboot.service                                \
-+		      plymouth-switch-root-initramfs.service &&              \
-+		$(LN_S) ../plymouth-reboot.service &&                        \
-+		$(LN_S) ../plymouth-switch-root-initramfs.service)
- 	(cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/kexec.target.wants &&              \
- 		rm -f plymouth-kexec.service &&                              \
- 		$(LN_S) ../plymouth-kexec.service)
- 	(cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/poweroff.target.wants &&           \
--		rm -f plymouth-poweroff.service &&                           \
--		$(LN_S) ../plymouth-poweroff.service)
-+		rm -f plymouth-poweroff.service                              \
-+		      plymouth-switch-root-initramfs.service &&              \
-+		$(LN_S) ../plymouth-poweroff.service &&                      \
-+		$(LN_S) ../plymouth-switch-root-initramfs.service)
- 	(cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/halt.target.wants &&               \
--		rm -f plymouth-halt.service &&                               \
--		$(LN_S) ../plymouth-halt.service)
-+		rm -f plymouth-halt.service                                  \
-+		      plymouth-switch-root-initramfs.service &&              \
-+		$(LN_S) ../plymouth-halt.service &&                          \
-+		$(LN_S) ../plymouth-switch-root-initramfs.service)
- 
- uninstall-hook:
- 	(cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/initrd-switch-root.target.wants && \
- 		rm -f plymouth-start.service plymouth-switch-root.service)
- 	(cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/sysinit.target.wants &&            \
- 		rm -f plymouth-start.service plymouth-read-write.service)
- 	(cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/multi-user.target.wants &&         \
- 		rm -f plymouth-quit.service plymouth-quit-wait.service)
- 	(cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/reboot.target.wants &&             \
--		rm -f plymouth-reboot.service)
-+		rm -f plymouth-reboot.service                                \
-+		      plymouth-switch-root-initramfs.service)
- 	(cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/kexec.target.wants &&              \
- 		rm -f plymouth-kexec.service)
- 	(cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/poweroff.target.wants &&           \
--		rm -f plymouth-poweroff.service)
-+		rm -f plymouth-poweroff.service                              \
-+		      plymouth-switch-root-initramfs.service)
- 	(cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/halt.target.wants &&               \
--		rm -f plymouth-halt.service)
-+		rm -f plymouth-halt.service                                  \
-+		      plymouth-switch-root-initramfs.service)
- 	rmdir --ignore-fail-on-non-empty                                     \
- 		$(DESTDIR)$(SYSTEMD_UNIT_DIR)/sysinit.target.wants           \
- 		$(DESTDIR)$(SYSTEMD_UNIT_DIR)/multi-user.target.wants        \
- 		$(DESTDIR)$(SYSTEMD_UNIT_DIR)/reboot.target.wants            \
- 		$(DESTDIR)$(SYSTEMD_UNIT_DIR)/kexec.target.wants             \
- 		$(DESTDIR)$(SYSTEMD_UNIT_DIR)/poweroff.target.wants          \
- 		$(DESTDIR)$(SYSTEMD_UNIT_DIR)/halt.target.wants
- 
- endif
- 
- EXTRA_DIST = $(systemd_unit_templates) $(systemdunit_DATA)
- DISTCLEANFILES=$(systemdunit_DATA)
-diff --git a/systemd-units/plymouth-halt.service.in b/systemd-units/plymouth-halt.service.in
-index cb87c1f..00f7eed 100644
---- a/systemd-units/plymouth-halt.service.in
-+++ b/systemd-units/plymouth-halt.service.in
-@@ -1,13 +1,14 @@
- [Unit]
- Description=Show Plymouth Halt Screen
- After=getty@tty1.service display-manager.service plymouth-start.service
- Before=systemd-halt.service
- DefaultDependencies=no
- ConditionKernelCommandLine=!plymouth.enable=0
- ConditionVirtualization=!container
- 
- [Service]
- ExecStart=@PLYMOUTH_DAEMON_DIR@/plymouthd --mode=shutdown --attach-to-session
- ExecStartPost=-@PLYMOUTH_CLIENT_DIR@/plymouth show-splash
-+KillMode=none
- Type=forking
- RemainAfterExit=yes
-diff --git a/systemd-units/plymouth-poweroff.service.in b/systemd-units/plymouth-poweroff.service.in
-index cf05e47..a1f78eb 100644
---- a/systemd-units/plymouth-poweroff.service.in
-+++ b/systemd-units/plymouth-poweroff.service.in
-@@ -1,13 +1,14 @@
- [Unit]
- Description=Show Plymouth Power Off Screen
- After=getty@tty1.service display-manager.service plymouth-start.service
- Before=systemd-poweroff.service
- DefaultDependencies=no
- ConditionKernelCommandLine=!plymouth.enable=0
- ConditionVirtualization=!container
- 
- [Service]
- ExecStart=@PLYMOUTH_DAEMON_DIR@/plymouthd --mode=shutdown --attach-to-session
- ExecStartPost=-@PLYMOUTH_CLIENT_DIR@/plymouth show-splash
-+KillMode=none
- Type=forking
- RemainAfterExit=yes
-diff --git a/systemd-units/plymouth-reboot.service.in b/systemd-units/plymouth-reboot.service.in
-index 3624550..8fff576 100644
---- a/systemd-units/plymouth-reboot.service.in
-+++ b/systemd-units/plymouth-reboot.service.in
-@@ -1,13 +1,14 @@
- [Unit]
- Description=Show Plymouth Reboot Screen
- After=getty@tty1.service display-manager.service plymouth-start.service
- Before=systemd-reboot.service
- DefaultDependencies=no
- ConditionKernelCommandLine=!plymouth.enable=0
- ConditionVirtualization=!container
- 
- [Service]
- ExecStart=@PLYMOUTH_DAEMON_DIR@/plymouthd --mode=reboot --attach-to-session
- ExecStartPost=-@PLYMOUTH_CLIENT_DIR@/plymouth show-splash
-+KillMode=none
- Type=forking
- RemainAfterExit=yes
-diff --git a/systemd-units/plymouth-switch-root-initramfs.service.in b/systemd-units/plymouth-switch-root-initramfs.service.in
-new file mode 100644
-index 0000000..cb20459
---- /dev/null
-+++ b/systemd-units/plymouth-switch-root-initramfs.service.in
-@@ -0,0 +1,12 @@
-+[Unit]
-+Description=Tell Plymouth To Jump To initramfs
-+DefaultDependencies=no
-+After=plymouth-halt.service plymouth-reboot.service plymouth-poweroff.service dracut-shutdown.service
-+ConditionPathExists=/run/initramfs/bin/sh
-+
-+[Service]
-+Type=oneshot
-+RemainAfterExit=yes
-+ExecStart=-@PLYMOUTH_CLIENT_DIR@/plymouth update-root-fs --new-root-dir=/run/initramfs
-+Type=oneshot
-+RemainAfterExit=yes
--- 
-2.26.0
-

SOURCES/0002-ply-device-manager-Treat-SimpleDRM-drm-devices-as-fb.patch

@@ -0,0 +1,159 @@
+From ccb1a425efa1a21ba0d6730b8eba030c5f1d4ada Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Mon, 28 Feb 2022 16:07:11 +0100
+Subject: [PATCH 2/6] ply-device-manager: Treat SimpleDRM drm devices as fbdev
+ devices
+
+Simple-framebuffer devices driven by simpledrm lack information
+like panel-rotation info and physical size, causing the splash
+to briefly render on its side / without HiDPI scaling, switching
+to the correct rendering when the native driver loads.
+
+To avoid this treat simpledrm devices as fbdev devices and only
+use them after the timeout.
+
+Also adds 2 exceptions to this:
+
+1. If nomodeset is passed on the kernel commandline then no native
+drivers will load, so in this case it is best to immediately use
+SimpleDRM devices when they are detected.
+
+2. On some devics the firmware leave the panel black at boot. In this
+case it is desirable to show the splash to the user ASAP so that there
+is some visual feedback that the device is booting. Add a support for a
+"plymouth.use-simpledrm" kernel cmdline option to show the splash
+immediately on SimpleDRM devices rather then waiting for the native
+driver to load.
+
+Closes #167
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+ src/libply-splash-core/ply-device-manager.c | 39 +++++++++++++++++++++
+ 1 file changed, 39 insertions(+)
+
+diff --git a/src/libply-splash-core/ply-device-manager.c b/src/libply-splash-core/ply-device-manager.c
+index aed7bac..b2484b4 100644
+--- a/src/libply-splash-core/ply-device-manager.c
++++ b/src/libply-splash-core/ply-device-manager.c
+@@ -378,78 +378,117 @@ create_devices_for_subsystem (ply_device_manager_t *manager,
+ static void
+ on_drm_udev_add_or_change (ply_device_manager_t *manager,
+                            const char           *action,
+                            const char           *device_path,
+                            struct udev_device   *device)
+ {
+         ply_renderer_t *renderer;
+         bool changed;
+ 
+         renderer = ply_hashtable_lookup (manager->renderers, (void *) device_path);
+         if (renderer == NULL) {
+                 /* We also try to create the renderer again on change events,
+                  * renderer creation fails when no outputs are connected and
+                  * this may have changed.
+                  */
+                 create_devices_for_udev_device (manager, device);
+                 return;
+         }
+ 
+         /* Renderer exists, bail if this is not a change event */
+         if (strcmp (action, "change"))
+                 return;
+ 
+         changed = ply_renderer_handle_change_event (renderer);
+         if (changed) {
+                 free_displays_for_renderer (manager, renderer);
+                 create_pixel_displays_for_renderer (manager, renderer);
+         }
+ }
+ 
++static bool
++verify_drm_device (struct udev_device *device)
++{
++        const char *id_path;
++
++        /*
++         * Simple-framebuffer devices driven by simpledrm lack information
++         * like panel-rotation info and physical size, causing the splash
++         * to briefly render on its side / without HiDPI scaling, switching
++         * to the correct rendering when the native driver loads.
++         * To avoid this treat simpledrm devices as fbdev devices and only
++         * use them after the timeout.
++         */
++        id_path = udev_device_get_property_value (device, "ID_PATH");
++        if (!ply_string_has_prefix (id_path, "platform-simple-framebuffer"))
++                return true; /* Not a SimpleDRM device */
++
++        /*
++         * With nomodeset, no native drivers will load, so SimpleDRM devices
++         * should be used immediately.
++         */
++        if (ply_kernel_command_line_has_argument ("nomodeset"))
++                return true;
++
++        /*
++         * Some firmwares leave the panel black at boot. Allow enabling SimpleDRM
++         * use from the cmdline to show something to the user ASAP.
++         */
++        if (ply_kernel_command_line_has_argument ("plymouth.use-simpledrm"))
++                return true;
++
++        return false;
++}
++
+ static bool
+ verify_add_or_change (ply_device_manager_t *manager,
+                       const char           *action,
+                       const char           *device_path,
+                       struct udev_device   *device)
+ {
+         const char *subsystem = udev_device_get_subsystem (device);
+ 
+         if (strcmp (action, "add") && strcmp (action, "change"))
+                 return false;
+ 
+         subsystem = udev_device_get_subsystem (device);
+ 
+         if (strcmp (subsystem, SUBSYSTEM_DRM) == 0) {
+                 if (manager->local_console_managed && manager->local_console_is_text) {
+                         ply_trace ("ignoring since we're already using text splash for local console");
+                         return false;
+                 }
++
++                if (!verify_drm_device (device)) {
++                        ply_trace ("ignoring since we only handle SimpleDRM devices after timeout");
++                        return false;
++                }
+         } else {
+                 ply_trace ("ignoring since we only handle subsystem %s devices after timeout", subsystem);
+                 return false;
+         }
+ 
+         return true;
+ }
+ 
+ static bool
+ duplicate_device_path (ply_list_t *events, const char *device_path)
+ {
+         struct udev_device *device;
+         ply_list_node_t *node;
+ 
+         for (node = ply_list_get_first_node (events);
+              node; node = ply_list_get_next_node (events, node)) {
+                 device = ply_list_node_get_data (node);
+ 
+                 if (strcmp (udev_device_get_devnode (device), device_path) == 0)
+                         return true;
+         }
+ 
+         return false;
+ }
+ 
+ static void
+ process_udev_add_or_change_events (ply_device_manager_t *manager, ply_list_t *events)
+ {
+         const char *action, *device_path;
+         struct udev_device *device;
+-- 
+2.37.0.rc1
+

SOURCES/0002-throbgress-update-for-api-change.patch

@@ -1,142 +0,0 @@
-From b9faf90fe5939fedfd710e1e8385f4d5c12e1df7 Mon Sep 17 00:00:00 2001
-From: Ray Strode <rstrode@redhat.com>
-Date: Mon, 15 Jun 2020 10:35:45 -0400
-Subject: [PATCH 2/2] throbgress: update for api change
-
----
- src/plugins/splash/throbgress/plugin.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/src/plugins/splash/throbgress/plugin.c b/src/plugins/splash/throbgress/plugin.c
-index 86be064..68cca70 100644
---- a/src/plugins/splash/throbgress/plugin.c
-+++ b/src/plugins/splash/throbgress/plugin.c
-@@ -715,61 +715,61 @@ update_status (ply_boot_splash_plugin_t *plugin,
- }
- 
- static void
- on_boot_progress (ply_boot_splash_plugin_t *plugin,
-                   double                    duration,
-                   double                    percent_done)
- {
-         ply_list_node_t *node;
-         double total_duration;
- 
-         if (plugin->mode == PLY_BOOT_SPLASH_MODE_UPDATES ||
-             plugin->mode == PLY_BOOT_SPLASH_MODE_SYSTEM_UPGRADE ||
-             plugin->mode == PLY_BOOT_SPLASH_MODE_FIRMWARE_UPGRADE)
-                 return;
- 
-         total_duration = duration / percent_done;
- 
-         /* Fun made-up smoothing function to make the growth asymptotic:
-          * fraction(time,estimate)=1-2^(-(time^1.45)/estimate) */
-         percent_done = 1.0 - pow (2.0, -pow (duration, 1.45) / total_duration) * (1.0 - percent_done);
- 
-         node = ply_list_get_first_node (plugin->views);
- 
-         while (node != NULL) {
-                 ply_list_node_t *next_node;
-                 view_t *view;
- 
-                 view = ply_list_node_get_data (node);
-                 next_node = ply_list_get_next_node (plugin->views, node);
- 
--                ply_progress_bar_set_percent_done (view->progress_bar, percent_done);
-+                ply_progress_bar_set_fraction_done (view->progress_bar, percent_done);
- 
-                 node = next_node;
-         }
- }
- 
- static void
- hide_splash_screen (ply_boot_splash_plugin_t *plugin,
-                     ply_event_loop_t         *loop)
- {
-         assert (plugin != NULL);
- 
-         ply_trace ("hiding splash");
-         if (plugin->loop != NULL) {
-                 stop_animation (plugin, NULL);
- 
-                 ply_event_loop_stop_watching_for_exit (plugin->loop, (ply_event_loop_exit_handler_t)
-                                                        detach_from_event_loop,
-                                                        plugin);
-                 detach_from_event_loop (plugin);
-         }
- 
-         plugin->is_visible = false;
- }
- 
- static void
- show_password_prompt (ply_boot_splash_plugin_t *plugin,
-                       const char               *text,
-                       int                       number_of_bullets)
- {
-         ply_list_node_t *node;
-@@ -920,61 +920,61 @@ display_question (ply_boot_splash_plugin_t *plugin,
-         show_prompt (plugin, prompt, entry_text);
-         redraw_views (plugin);
-         unpause_views (plugin);
- }
- 
- static void
- display_message (ply_boot_splash_plugin_t *plugin,
-                  const char               *message)
- {
-         show_message (plugin, message);
- }
- 
- static void
- system_update (ply_boot_splash_plugin_t *plugin,
-                int                       progress)
- {
-         ply_list_node_t *node;
- 
-         if (plugin->mode != PLY_BOOT_SPLASH_MODE_UPDATES &&
-             plugin->mode != PLY_BOOT_SPLASH_MODE_SYSTEM_UPGRADE &&
-             plugin->mode != PLY_BOOT_SPLASH_MODE_FIRMWARE_UPGRADE)
-                 return;
- 
-         node = ply_list_get_first_node (plugin->views);
-         while (node != NULL) {
-                 ply_list_node_t *next_node;
-                 view_t *view;
- 
-                 view = ply_list_node_get_data (node);
-                 next_node = ply_list_get_next_node (plugin->views, node);
--                ply_progress_bar_set_percent_done (view->progress_bar, (double) progress / 100.f);
-+                ply_progress_bar_set_fraction_done (view->progress_bar, (double) progress / 100.f);
-                 node = next_node;
-         }
- }
- 
- ply_boot_splash_plugin_interface_t *
- ply_boot_splash_plugin_get_interface (void)
- {
-         static ply_boot_splash_plugin_interface_t plugin_interface =
-         {
-                 .create_plugin        = create_plugin,
-                 .destroy_plugin       = destroy_plugin,
-                 .add_pixel_display    = add_pixel_display,
-                 .remove_pixel_display = remove_pixel_display,
-                 .show_splash_screen   = show_splash_screen,
-                 .update_status        = update_status,
-                 .on_boot_progress     = on_boot_progress,
-                 .hide_splash_screen   = hide_splash_screen,
-                 .on_root_mounted      = on_root_mounted,
-                 .become_idle          = become_idle,
-                 .display_normal       = display_normal,
-                 .display_password     = display_password,
-                 .display_question     = display_question,
-                 .display_message      = display_message,
-                 .system_update        = system_update,
-         };
- 
-         return &plugin_interface;
- }
- 
- /* vim: set ts=4 sw=4 expandtab autoindent cindent cino={.5s,(0: */
--- 
-2.21.0
-

SOURCES/0003-ply-device-manager-Move-verify_drm_device-higher-up-.patch

@@ -0,0 +1,213 @@
+From 7fbd59d04e971d327c3aaba417765f25c3168447 Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Wed, 28 Sep 2022 15:14:00 +0200
+Subject: [PATCH 3/6] ply-device-manager: Move verify_drm_device() higher up in
+ the file
+
+Move verify_drm_device() higher up in ply-device-manager.c, this is
+a preparation patch for the next patch in this series.
+
+This is a pure move without any changes to the moved block.
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+ src/libply-splash-core/ply-device-manager.c | 68 ++++++++++-----------
+ 1 file changed, 34 insertions(+), 34 deletions(-)
+
+diff --git a/src/libply-splash-core/ply-device-manager.c b/src/libply-splash-core/ply-device-manager.c
+index b2484b4..015bd70 100644
+--- a/src/libply-splash-core/ply-device-manager.c
++++ b/src/libply-splash-core/ply-device-manager.c
+@@ -236,60 +236,94 @@ fb_device_has_drm_device (ply_device_manager_t *manager,
+         ply_trace ("trying to find associated drm node for fb device (path: %s)", id_path);
+ 
+         udev_enumerate_scan_devices (card_matches);
+ 
+         /* there should only ever be at most one match so we don't iterate through
+          * the list, but just look at the first entry */
+         card_entry = udev_enumerate_get_list_entry (card_matches);
+ 
+         if (card_entry != NULL) {
+                 struct udev_device *card_device = NULL;
+                 const char *card_node;
+                 const char *card_path;
+ 
+                 card_path = udev_list_entry_get_name (card_entry);
+                 card_device = udev_device_new_from_syspath (manager->udev_context, card_path);
+                 card_node = udev_device_get_devnode (card_device);
+                 if (card_node != NULL && drm_device_in_use (manager, card_node))
+                         has_drm_device = true;
+                 else
+                         ply_trace ("no card node!");
+ 
+                 udev_device_unref (card_device);
+         } else {
+                 ply_trace ("no card entry!");
+         }
+ 
+         udev_enumerate_unref (card_matches);
+         return has_drm_device;
+ }
+ 
++static bool
++verify_drm_device (struct udev_device *device)
++{
++        const char *id_path;
++
++        /*
++         * Simple-framebuffer devices driven by simpledrm lack information
++         * like panel-rotation info and physical size, causing the splash
++         * to briefly render on its side / without HiDPI scaling, switching
++         * to the correct rendering when the native driver loads.
++         * To avoid this treat simpledrm devices as fbdev devices and only
++         * use them after the timeout.
++         */
++        id_path = udev_device_get_property_value (device, "ID_PATH");
++        if (!ply_string_has_prefix (id_path, "platform-simple-framebuffer"))
++                return true; /* Not a SimpleDRM device */
++
++        /*
++         * With nomodeset, no native drivers will load, so SimpleDRM devices
++         * should be used immediately.
++         */
++        if (ply_kernel_command_line_has_argument ("nomodeset"))
++                return true;
++
++        /*
++         * Some firmwares leave the panel black at boot. Allow enabling SimpleDRM
++         * use from the cmdline to show something to the user ASAP.
++         */
++        if (ply_kernel_command_line_has_argument ("plymouth.use-simpledrm"))
++                return true;
++
++        return false;
++}
++
+ static bool
+ create_devices_for_udev_device (ply_device_manager_t *manager,
+                                 struct udev_device   *device)
+ {
+         const char *device_path;
+         bool created = false;
+ 
+         device_path = udev_device_get_devnode (device);
+ 
+         if (device_path != NULL) {
+                 const char *subsystem;
+                 ply_renderer_type_t renderer_type = PLY_RENDERER_TYPE_NONE;
+ 
+                 subsystem = udev_device_get_subsystem (device);
+                 ply_trace ("device subsystem is %s", subsystem);
+ 
+                 if (subsystem != NULL && strcmp (subsystem, SUBSYSTEM_DRM) == 0) {
+                         ply_trace ("found DRM device %s", device_path);
+                         renderer_type = PLY_RENDERER_TYPE_DRM;
+                 } else if (strcmp (subsystem, SUBSYSTEM_FRAME_BUFFER) == 0) {
+                         ply_trace ("found frame buffer device %s", device_path);
+                         if (!fb_device_has_drm_device (manager, device))
+                                 renderer_type = PLY_RENDERER_TYPE_FRAME_BUFFER;
+                         else
+                                 ply_trace ("ignoring, since there's a DRM device associated with it");
+                 }
+ 
+                 if (renderer_type != PLY_RENDERER_TYPE_NONE) {
+                         ply_terminal_t *terminal = NULL;
+ 
+@@ -378,94 +412,60 @@ create_devices_for_subsystem (ply_device_manager_t *manager,
+ static void
+ on_drm_udev_add_or_change (ply_device_manager_t *manager,
+                            const char           *action,
+                            const char           *device_path,
+                            struct udev_device   *device)
+ {
+         ply_renderer_t *renderer;
+         bool changed;
+ 
+         renderer = ply_hashtable_lookup (manager->renderers, (void *) device_path);
+         if (renderer == NULL) {
+                 /* We also try to create the renderer again on change events,
+                  * renderer creation fails when no outputs are connected and
+                  * this may have changed.
+                  */
+                 create_devices_for_udev_device (manager, device);
+                 return;
+         }
+ 
+         /* Renderer exists, bail if this is not a change event */
+         if (strcmp (action, "change"))
+                 return;
+ 
+         changed = ply_renderer_handle_change_event (renderer);
+         if (changed) {
+                 free_displays_for_renderer (manager, renderer);
+                 create_pixel_displays_for_renderer (manager, renderer);
+         }
+ }
+ 
+-static bool
+-verify_drm_device (struct udev_device *device)
+-{
+-        const char *id_path;
+-
+-        /*
+-         * Simple-framebuffer devices driven by simpledrm lack information
+-         * like panel-rotation info and physical size, causing the splash
+-         * to briefly render on its side / without HiDPI scaling, switching
+-         * to the correct rendering when the native driver loads.
+-         * To avoid this treat simpledrm devices as fbdev devices and only
+-         * use them after the timeout.
+-         */
+-        id_path = udev_device_get_property_value (device, "ID_PATH");
+-        if (!ply_string_has_prefix (id_path, "platform-simple-framebuffer"))
+-                return true; /* Not a SimpleDRM device */
+-
+-        /*
+-         * With nomodeset, no native drivers will load, so SimpleDRM devices
+-         * should be used immediately.
+-         */
+-        if (ply_kernel_command_line_has_argument ("nomodeset"))
+-                return true;
+-
+-        /*
+-         * Some firmwares leave the panel black at boot. Allow enabling SimpleDRM
+-         * use from the cmdline to show something to the user ASAP.
+-         */
+-        if (ply_kernel_command_line_has_argument ("plymouth.use-simpledrm"))
+-                return true;
+-
+-        return false;
+-}
+-
+ static bool
+ verify_add_or_change (ply_device_manager_t *manager,
+                       const char           *action,
+                       const char           *device_path,
+                       struct udev_device   *device)
+ {
+         const char *subsystem = udev_device_get_subsystem (device);
+ 
+         if (strcmp (action, "add") && strcmp (action, "change"))
+                 return false;
+ 
+         subsystem = udev_device_get_subsystem (device);
+ 
+         if (strcmp (subsystem, SUBSYSTEM_DRM) == 0) {
+                 if (manager->local_console_managed && manager->local_console_is_text) {
+                         ply_trace ("ignoring since we're already using text splash for local console");
+                         return false;
+                 }
+ 
+                 if (!verify_drm_device (device)) {
+                         ply_trace ("ignoring since we only handle SimpleDRM devices after timeout");
+                         return false;
+                 }
+         } else {
+                 ply_trace ("ignoring since we only handle subsystem %s devices after timeout", subsystem);
+                 return false;
+         }
+ 
+         return true;
+ }
+-- 
+2.37.0.rc1
+

SOURCES/0004-ply-device-manager-Remove-unnecessary-subsystem-NULL.patch

@@ -0,0 +1,88 @@
+From 5a493ef808b769f4ccc4f3acc1ecf048b8e3efdc Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Mon, 28 Feb 2022 16:20:43 +0100
+Subject: [PATCH 4/6] ply-device-manager: Remove unnecessary subsystem != NULL
+ check
+
+The ply-device-manager.c already assumes that the return value of
+udev_device_get_subsystem () is never NULL in many places, including
+in the condition of the "else if" just below the check which is
+being removed.
+
+Remove the one lonely check for it being NULL for consistency.
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+ src/libply-splash-core/ply-device-manager.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/src/libply-splash-core/ply-device-manager.c b/src/libply-splash-core/ply-device-manager.c
+index 015bd70..6b7ccd6 100644
+--- a/src/libply-splash-core/ply-device-manager.c
++++ b/src/libply-splash-core/ply-device-manager.c
+@@ -286,61 +286,61 @@ verify_drm_device (struct udev_device *device)
+          */
+         if (ply_kernel_command_line_has_argument ("nomodeset"))
+                 return true;
+ 
+         /*
+          * Some firmwares leave the panel black at boot. Allow enabling SimpleDRM
+          * use from the cmdline to show something to the user ASAP.
+          */
+         if (ply_kernel_command_line_has_argument ("plymouth.use-simpledrm"))
+                 return true;
+ 
+         return false;
+ }
+ 
+ static bool
+ create_devices_for_udev_device (ply_device_manager_t *manager,
+                                 struct udev_device   *device)
+ {
+         const char *device_path;
+         bool created = false;
+ 
+         device_path = udev_device_get_devnode (device);
+ 
+         if (device_path != NULL) {
+                 const char *subsystem;
+                 ply_renderer_type_t renderer_type = PLY_RENDERER_TYPE_NONE;
+ 
+                 subsystem = udev_device_get_subsystem (device);
+                 ply_trace ("device subsystem is %s", subsystem);
+ 
+-                if (subsystem != NULL && strcmp (subsystem, SUBSYSTEM_DRM) == 0) {
++                if (strcmp (subsystem, SUBSYSTEM_DRM) == 0) {
+                         ply_trace ("found DRM device %s", device_path);
+                         renderer_type = PLY_RENDERER_TYPE_DRM;
+                 } else if (strcmp (subsystem, SUBSYSTEM_FRAME_BUFFER) == 0) {
+                         ply_trace ("found frame buffer device %s", device_path);
+                         if (!fb_device_has_drm_device (manager, device))
+                                 renderer_type = PLY_RENDERER_TYPE_FRAME_BUFFER;
+                         else
+                                 ply_trace ("ignoring, since there's a DRM device associated with it");
+                 }
+ 
+                 if (renderer_type != PLY_RENDERER_TYPE_NONE) {
+                         ply_terminal_t *terminal = NULL;
+ 
+                         if (!manager->local_console_managed) {
+                                 terminal = manager->local_console_terminal;
+                         }
+ 
+                         created = create_devices_for_terminal_and_renderer_type (manager,
+                                                                                  device_path,
+                                                                                  terminal,
+                                                                                  renderer_type);
+                         if (created) {
+                                 if (renderer_type == PLY_RENDERER_TYPE_DRM)
+                                         manager->found_drm_device = 1;
+                                 if (renderer_type == PLY_RENDERER_TYPE_FRAME_BUFFER)
+                                         manager->found_fb_device = 1;
+                         }
+                 }
+         }
+ 
+-- 
+2.37.0.rc1
+

SOURCES/0005-ply-device-manager-verify_add_or_change-Move-local_c.patch

@@ -0,0 +1,103 @@
+From 406376fbe89078678d68392ea76151ecb4f0e30a Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Mon, 28 Feb 2022 16:36:58 +0100
+Subject: [PATCH 5/6] ply-device-manager: verify_add_or_change(): Move
+ local_console_is_text check
+
+Move the local_console_is_text check outside of the
+"if (subsytem == SUBSYSTEM_DRM)" block.
+
+This check is equally relevant for SUBSYSTEM_FRAME_BUFFER.
+
+Note by itself this is a no-op since verify_add_or_change() *always*
+returns false for SUBSYSTEM_FRAME_BUFFER devices.
+
+This is a preparation patch for making verify_add_or_change() not
+return false when manager->device_timeout_elapsed is set.
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+ src/libply-splash-core/ply-device-manager.c | 10 +++++-----
+ 1 file changed, 5 insertions(+), 5 deletions(-)
+
+diff --git a/src/libply-splash-core/ply-device-manager.c b/src/libply-splash-core/ply-device-manager.c
+index 6b7ccd6..bff4982 100644
+--- a/src/libply-splash-core/ply-device-manager.c
++++ b/src/libply-splash-core/ply-device-manager.c
+@@ -423,68 +423,68 @@ on_drm_udev_add_or_change (ply_device_manager_t *manager,
+                 /* We also try to create the renderer again on change events,
+                  * renderer creation fails when no outputs are connected and
+                  * this may have changed.
+                  */
+                 create_devices_for_udev_device (manager, device);
+                 return;
+         }
+ 
+         /* Renderer exists, bail if this is not a change event */
+         if (strcmp (action, "change"))
+                 return;
+ 
+         changed = ply_renderer_handle_change_event (renderer);
+         if (changed) {
+                 free_displays_for_renderer (manager, renderer);
+                 create_pixel_displays_for_renderer (manager, renderer);
+         }
+ }
+ 
+ static bool
+ verify_add_or_change (ply_device_manager_t *manager,
+                       const char           *action,
+                       const char           *device_path,
+                       struct udev_device   *device)
+ {
+         const char *subsystem = udev_device_get_subsystem (device);
+ 
+         if (strcmp (action, "add") && strcmp (action, "change"))
+                 return false;
+ 
++        if (manager->local_console_managed && manager->local_console_is_text) {
++                ply_trace ("ignoring since we're already using text splash for local console");
++                return false;
++        }
++
+         subsystem = udev_device_get_subsystem (device);
+ 
+         if (strcmp (subsystem, SUBSYSTEM_DRM) == 0) {
+-                if (manager->local_console_managed && manager->local_console_is_text) {
+-                        ply_trace ("ignoring since we're already using text splash for local console");
+-                        return false;
+-                }
+-
+                 if (!verify_drm_device (device)) {
+                         ply_trace ("ignoring since we only handle SimpleDRM devices after timeout");
+                         return false;
+                 }
+         } else {
+                 ply_trace ("ignoring since we only handle subsystem %s devices after timeout", subsystem);
+                 return false;
+         }
+ 
+         return true;
+ }
+ 
+ static bool
+ duplicate_device_path (ply_list_t *events, const char *device_path)
+ {
+         struct udev_device *device;
+         ply_list_node_t *node;
+ 
+         for (node = ply_list_get_first_node (events);
+              node; node = ply_list_get_next_node (events, node)) {
+                 device = ply_list_node_get_data (node);
+ 
+                 if (strcmp (udev_device_get_devnode (device), device_path) == 0)
+                         return true;
+         }
+ 
+         return false;
+ }
+ 
+ static void
+-- 
+2.37.0.rc1
+

SOURCES/0006-ply-device-manager-verify_add_or_change-Move-local_c.patch

@@ -0,0 +1,162 @@
+From eb40956898e35121525e253305f6d40b45cfbf23 Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Mon, 28 Feb 2022 16:36:58 +0100
+Subject: [PATCH 6/6] ply-device-manager: verify_add_or_change(): Move
+ local_console_is_text check
+
+Move the local_console_is_text check outside of the
+"if (subsytem == SUBSYSTEM_DRM)" block.
+
+This check is equally relevant for SUBSYSTEM_FRAME_BUFFER.
+
+Note by itself this is a no-op since verify_add_or_change() *always*
+returns false for SUBSYSTEM_FRAME_BUFFER devices.
+
+This is a preparation patch for making verify_add_or_change() not
+return false when manager->device_timeout_elapsed is set.
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+ src/libply-splash-core/ply-device-manager.c | 11 +++++------
+ 1 file changed, 5 insertions(+), 6 deletions(-)
+
+diff --git a/src/libply-splash-core/ply-device-manager.c b/src/libply-splash-core/ply-device-manager.c
+index bff4982..29b26fc 100644
+--- a/src/libply-splash-core/ply-device-manager.c
++++ b/src/libply-splash-core/ply-device-manager.c
+@@ -287,60 +287,64 @@ verify_drm_device (struct udev_device *device)
+         if (ply_kernel_command_line_has_argument ("nomodeset"))
+                 return true;
+ 
+         /*
+          * Some firmwares leave the panel black at boot. Allow enabling SimpleDRM
+          * use from the cmdline to show something to the user ASAP.
+          */
+         if (ply_kernel_command_line_has_argument ("plymouth.use-simpledrm"))
+                 return true;
+ 
+         return false;
+ }
+ 
+ static bool
+ create_devices_for_udev_device (ply_device_manager_t *manager,
+                                 struct udev_device   *device)
+ {
+         const char *device_path;
+         bool created = false;
+ 
+         device_path = udev_device_get_devnode (device);
+ 
+         if (device_path != NULL) {
+                 const char *subsystem;
+                 ply_renderer_type_t renderer_type = PLY_RENDERER_TYPE_NONE;
+ 
+                 subsystem = udev_device_get_subsystem (device);
+                 ply_trace ("device subsystem is %s", subsystem);
+ 
+                 if (strcmp (subsystem, SUBSYSTEM_DRM) == 0) {
++                        if (!manager->device_timeout_elapsed && !verify_drm_device (device)) {
++                                ply_trace ("ignoring since we only handle SimpleDRM devices after timeout");
++                                return false;
++                        }
+                         ply_trace ("found DRM device %s", device_path);
+                         renderer_type = PLY_RENDERER_TYPE_DRM;
+                 } else if (strcmp (subsystem, SUBSYSTEM_FRAME_BUFFER) == 0) {
+                         ply_trace ("found frame buffer device %s", device_path);
+                         if (!fb_device_has_drm_device (manager, device))
+                                 renderer_type = PLY_RENDERER_TYPE_FRAME_BUFFER;
+                         else
+                                 ply_trace ("ignoring, since there's a DRM device associated with it");
+                 }
+ 
+                 if (renderer_type != PLY_RENDERER_TYPE_NONE) {
+                         ply_terminal_t *terminal = NULL;
+ 
+                         if (!manager->local_console_managed) {
+                                 terminal = manager->local_console_terminal;
+                         }
+ 
+                         created = create_devices_for_terminal_and_renderer_type (manager,
+                                                                                  device_path,
+                                                                                  terminal,
+                                                                                  renderer_type);
+                         if (created) {
+                                 if (renderer_type == PLY_RENDERER_TYPE_DRM)
+                                         manager->found_drm_device = 1;
+                                 if (renderer_type == PLY_RENDERER_TYPE_FRAME_BUFFER)
+                                         manager->found_fb_device = 1;
+                         }
+                 }
+         }
+ 
+@@ -430,66 +434,61 @@ on_drm_udev_add_or_change (ply_device_manager_t *manager,
+ 
+         /* Renderer exists, bail if this is not a change event */
+         if (strcmp (action, "change"))
+                 return;
+ 
+         changed = ply_renderer_handle_change_event (renderer);
+         if (changed) {
+                 free_displays_for_renderer (manager, renderer);
+                 create_pixel_displays_for_renderer (manager, renderer);
+         }
+ }
+ 
+ static bool
+ verify_add_or_change (ply_device_manager_t *manager,
+                       const char           *action,
+                       const char           *device_path,
+                       struct udev_device   *device)
+ {
+         const char *subsystem = udev_device_get_subsystem (device);
+ 
+         if (strcmp (action, "add") && strcmp (action, "change"))
+                 return false;
+ 
+         if (manager->local_console_managed && manager->local_console_is_text) {
+                 ply_trace ("ignoring since we're already using text splash for local console");
+                 return false;
+         }
+ 
+         subsystem = udev_device_get_subsystem (device);
+ 
+-        if (strcmp (subsystem, SUBSYSTEM_DRM) == 0) {
+-                if (!verify_drm_device (device)) {
+-                        ply_trace ("ignoring since we only handle SimpleDRM devices after timeout");
+-                        return false;
+-                }
+-        } else {
++        if (strcmp (subsystem, SUBSYSTEM_DRM)) {
+                 ply_trace ("ignoring since we only handle subsystem %s devices after timeout", subsystem);
+                 return false;
+         }
+ 
+         return true;
+ }
+ 
+ static bool
+ duplicate_device_path (ply_list_t *events, const char *device_path)
+ {
+         struct udev_device *device;
+         ply_list_node_t *node;
+ 
+         for (node = ply_list_get_first_node (events);
+              node; node = ply_list_get_next_node (events, node)) {
+                 device = ply_list_node_get_data (node);
+ 
+                 if (strcmp (udev_device_get_devnode (device), device_path) == 0)
+                         return true;
+         }
+ 
+         return false;
+ }
+ 
+ static void
+ process_udev_add_or_change_events (ply_device_manager_t *manager, ply_list_t *events)
+ {
+         const char *action, *device_path;
+         struct udev_device *device;
+         ply_list_node_t *node;
+-- 
+2.37.0.rc1
+

SOURCES/boot-duration

@@ -1,39 +0,0 @@
-0.222:RCkernelparam
-0.223:RChostname
-0.238:RCmountfs
-0.275:RCswap
-0.330:microcode_ctl
-0.357:cpuspeed
-0.365:ip6tables
-0.380:iptables
-0.385:isdn
-0.504:auditd
-0.508:restorecond
-0.523:rsyslog
-0.530:irqbalance
-0.533:rpcbind
-0.549:nfslock
-0.561:mdmonitor
-0.563:rpcidmapd
-0.578:rpcgssd
-0.579:messagebus
-0.580:fuse
-0.594:netfs
-0.600:acpid
-0.611:haldaemon
-0.660:pcscd
-0.691:udev-post
-0.703:portreserve
-0.712:setroubleshoot
-0.749:bluetooth
-0.738:sshd
-0.763:ntpd
-0.807:sendmail
-0.876:crond
-0.902:kerneloops
-0.907:smolt
-0.915:atd
-0.927:avahi-daemon
-0.941:cups
-0.983:anacron
-0.992:local

SOURCES/bootlog

@@ -1,8 +0,0 @@
-/var/log/boot.log
-{
-    missingok
-    daily
-    copytruncate
-    rotate 7
-    notifempty
-}

SOURCES/charge.plymouth

@@ -1,12 +1,12 @@
 [Plymouth Theme]
 Name=Charge
-Description=A theme that features a stylized 8 and spinner
+Description=A theme that features the shadowy hull of a Fedora logo charge up and and finally burst into into full form.
 ModuleName=two-step
 
 [two-step]
 ImageDir=/usr/share/plymouth/themes/charge
 HorizontalAlignment=.5
-VerticalAlignment=.75
+VerticalAlignment=.5
 Transition=none
 TransitionDuration=0.0
 BackgroundStartColor=0x202020

SOURCES/plymouth-update-initrd

@@ -1,2 +0,0 @@
-#!/bin/bash
-dracut -f

SOURCES/ship-label-plugin-in-initrd.patch

@@ -1,4 +1,4 @@
-From f72cdd6969c483d7811e5684fa3143deff55a0c7 Mon Sep 17 00:00:00 2001
+From 0f44635c348f99aeb7b7c24d88a26aa2202c4396 Mon Sep 17 00:00:00 2001
 From: Ray Strode <rstrode@redhat.com>
 Date: Mon, 17 Jun 2019 13:54:42 -0400
 Subject: [PATCH] populate-initrd: ship label plugin
@@ -9,10 +9,10 @@ This gives us font rendering at early boot.
  1 file changed, 21 insertions(+), 2 deletions(-)
 
 diff --git a/scripts/plymouth-populate-initrd.in b/scripts/plymouth-populate-initrd.in
-index 616ecc4..60fd063 100755
+index 66acdde..7ad6409 100755
 --- a/scripts/plymouth-populate-initrd.in
 +++ b/scripts/plymouth-populate-initrd.in
-@@ -1,55 +1,56 @@
+@@ -1,56 +1,57 @@
  #!/bin/bash
  #
  # inst bits ruthlessly and viciously stolen from dracut
@@ -37,6 +37,7 @@ index 616ecc4..60fd063 100755
  [ -z "$PLYMOUTH_POLICYDIR" ] && PLYMOUTH_POLICYDIR="@PLYMOUTH_POLICY_DIR@"
  [ -z "$PLYMOUTH_DAEMON_PATH" ] && PLYMOUTH_DAEMON_PATH="@PLYMOUTH_DAEMON_DIR@/plymouthd"
  [ -z "$PLYMOUTH_CLIENT_PATH" ] && PLYMOUTH_CLIENT_PATH="@PLYMOUTH_CLIENT_DIR@/plymouth"
+ [ -z "$PLYMOUTH_DRM_ESCROW_PATH" ] && PLYMOUTH_DRM_ESCROW_PATH="@PLYMOUTH_LIBEXECDIR@/plymouth/plymouthd-drm-escrow"
  [ -z "$SYSTEMD_UNIT_DIR" ] && SYSTEMD_UNIT_DIR="@SYSTEMD_UNIT_DIR@"
 +[ -z "$SUPPORTED_LANGUAGES" ] && SUPPORTED_LANGUAGES="pt fr de it ru es en zh ja ko zh as bn gu hi kn ml mr or pa ta te"
  
@@ -69,7 +70,7 @@ index 616ecc4..60fd063 100755
  convert_abs_rel() {
      local __current __absolute __abssize __cursize __newpath
      local -i __i __level
-@@ -434,59 +435,77 @@ if [ $THEME_OVERRIDE ]; then
+@@ -436,59 +437,77 @@ if [ $THEME_OVERRIDE ]; then
      conf=$INITRDDIR/${PLYMOUTH_CONFDIR}/plymouthd.conf
      echo "modifying plymouthd.conf: Theme=$PLYMOUTH_THEME_NAME" >&2
      # make sure the section and key exist so we can modify them
@@ -150,5 +151,5 @@ index 616ecc4..60fd063 100755
  
  # vim:ts=8:sw=4:sts=4:et
 -- 
-2.21.0
+2.32.0