.gitignore

@@ -1,2 +1 @@
-SOURCES/php-8.0.27.tar.xz
-SOURCES/php-keyring.gpg
+SOURCES/php-7.2.24.tar.xz

.php.metadata

@@ -1,2 +1 @@
-ac46d5e81f142f65130407d073997f549f316b4f SOURCES/php-8.0.27.tar.xz
-84a18625778745667413034f693446ea76846714 SOURCES/php-keyring.gpg
+d31628bdc89a724a2a0950c2ed7d79b40cf489a7 SOURCES/php-7.2.24.tar.xz

SOURCES/10-opcache.ini

@@ -5,17 +5,17 @@ zend_extension=opcache
 opcache.enable=1
 
 ; Determines if Zend OPCache is enabled for the CLI version of PHP
-opcache.enable_cli=1
+;opcache.enable_cli=0
 
 ; The OPcache shared memory storage size.
-;opcache.memory_consumption=128
+opcache.memory_consumption=128
 
 ; The amount of memory for interned strings in Mbytes.
-;opcache.interned_strings_buffer=8
+opcache.interned_strings_buffer=8
 
 ; The maximum number of keys (scripts) in the OPcache hash table.
 ; Only numbers between 200 and 1000000 are allowed.
-;opcache.max_accelerated_files=10000
+opcache.max_accelerated_files=4000
 
 ; The maximum percentage of "wasted" memory until a restart is scheduled.
 ;opcache.max_wasted_percentage=5
@@ -42,20 +42,18 @@ opcache.enable_cli=1
 ; size of the optimized code.
 ;opcache.save_comments=1
 
-; If enabled, compilation warnings (including notices and deprecations) will
-; be recorded and replayed each time a file is included. Otherwise, compilation
-; warnings will only be emitted when the file is first cached.
-;opcache.record_warnings=0
+; If enabled, a fast shutdown sequence is used for the accelerated code
+; Depending on the used Memory Manager this may cause some incompatibilities.
+;opcache.fast_shutdown=0
 
 ; Allow file existence override (file_exists, etc.) performance feature.
 ;opcache.enable_file_override=0
 
 ; A bitmask, where each bit enables or disables the appropriate OPcache
 ; passes
-;opcache.optimization_level=0x7FFFBFFF
+;opcache.optimization_level=0xffffffff
 
-; This hack should only be enabled to work around "Cannot redeclare class"
-; errors.
+;opcache.inherited_hack=1
 ;opcache.dups_fix=0
 
 ; The location of the OPcache blacklist file (wildcards allowed).
@@ -114,10 +112,6 @@ opcache.blacklist_filename=/etc/php.d/opcache*.blacklist
 ; cache is required.
 ;opcache.file_cache_fallback=1
 
-; Enables or disables copying of PHP code (text segment) into HUGE PAGES.
-; This should improve performance, but requires appropriate OS configuration.
-opcache.huge_code_pages=0
-
 ; Validate cached file permissions.
 ; Leads OPcache to check file readability on each access to cached file.
 ; This directive should be enabled in shared hosting environment, when few
@@ -130,24 +124,7 @@ opcache.huge_code_pages=0
 ; different "chroot" environments.
 ;opcache.validate_root=0
 
-; If specified, it produces opcode dumps for debugging different stages of
-; optimizations.
-;opcache.opt_debug_level=0
+; Enables or disables copying of PHP code (text segment) into HUGE PAGES.
+; This should improve performance, but requires appropriate OS configuration.
+opcache.huge_code_pages=0
 
-; Specifies a PHP script that is going to be compiled and executed at server
-; start-up.
-; http://php.net/opcache.preload
-;opcache.preload=
-
-; Preloading code as root is not allowed for security reasons. This directive
-; facilitates to let the preloading to be run as another user.
-; http://php.net/opcache.preload_user
-;opcache.preload_user=
-
-; Prevents caching files that are less than this number of seconds old. It
-; protects from caching of incompletely updated files. In case all file updates
-; on your site are atomic, you may increase performance by setting it to "0".
-;opcache.file_update_protection=2
-
-; Absolute path used to store shared lockfiles (for *nix only).
-;opcache.lockfile_path=/tmp

SOURCES/20-ffi.ini

@@ -1,13 +0,0 @@
-; Enable ffi extension module
-extension=ffi
-
-; FFI API restriction. Possibe values:
-; "preload" - enabled in CLI scripts and preloaded files (default)
-; "false"   - always disabled
-; "true"    - always enabled
-;ffi.enable=preload
-
-; List of headers files to preload, wildcard patterns allowed.
-; /usr/share/php/preload used by for RPM packages
-; /usr/local/share/php/preload may be used for local files
-ffi.preload=/usr/share/php/preload/*.h:/usr/local/share/php/preload/*.h

SOURCES/php-5.3.0-recode.patch

@@ -0,0 +1,17 @@
+diff -up php-5.3.0beta1/ext/recode/config9.m4.recode php-5.3.0beta1/ext/recode/config9.m4
+--- php-5.3.0beta1/ext/recode/config9.m4.recode	2008-12-02 00:30:21.000000000 +0100
++++ php-5.3.0beta1/ext/recode/config9.m4	2009-02-28 09:46:50.000000000 +0100
+@@ -4,13 +4,6 @@ dnl
+ 
+ dnl Check for extensions with which Recode can not work
+ if test "$PHP_RECODE" != "no"; then
+-  test "$PHP_IMAP"  != "no" && recode_conflict="$recode_conflict imap"
+-
+-  if test -n "$MYSQL_LIBNAME"; then
+-    PHP_CHECK_LIBRARY($MYSQL_LIBNAME, hash_insert, [
+-      recode_conflict="$recode_conflict mysql"
+-    ])
+-  fi
+ 
+   if test -n "$recode_conflict"; then
+     AC_MSG_ERROR([recode extension can not be configured together with:$recode_conflict])

SOURCES/php-5.6.3-datetests.patch

@@ -0,0 +1,23 @@
+--- a/ext/date/tests/bug66985.phpt	2014-10-30 07:32:03.297693403 +0100
++++ b/ext/date/tests/bug66985.phpt	2014-10-30 07:32:45.138877977 +0100
+@@ -3,7 +3,7 @@
+ --FILE--
+ <?php
+ $zones = array(
+-	"CST6CDT", "Cuba", "Egypt", "Eire", "EST5EDT", "Factory", "GB-Eire",
++	"CST6CDT", "Cuba", "Egypt", "Eire", "EST5EDT", "GB-Eire",
+ 	"GMT0", "Greenwich", "Hongkong", "Iceland", "Iran", "Israel", "Jamaica",
+ 	"Japan", "Kwajalein", "Libya", "MST7MDT", "Navajo", "NZ-CHAT", "Poland",
+ 	"Portugal", "PST8PDT", "Singapore", "Turkey", "Universal", "W-SU",
+@@ -45,11 +45,6 @@
+ )
+ DateTimeZone Object
+ (
+-    [timezone_type] => 3
+-    [timezone] => Factory
+-)
+-DateTimeZone Object
+-(
+     [timezone_type] => 3
+     [timezone] => GB-Eire
+ )

SOURCES/php-5.6.3-embed.patch

@@ -1,25 +1,24 @@
-diff -up ./sapi/embed/config.m4.embed ./sapi/embed/config.m4
---- ./sapi/embed/config.m4.embed	2020-07-07 13:51:05.879764972 +0200
-+++ ./sapi/embed/config.m4	2020-07-07 13:52:50.128412148 +0200
+--- php-5.6.3/sapi/embed/config.m4.embed
++++ php-5.6.3/sapi/embed/config.m4
 @@ -12,7 +12,8 @@ if test "$PHP_EMBED" != "no"; then
+   case "$PHP_EMBED" in
      yes|shared)
-       LIBPHP_CFLAGS="-shared"
        PHP_EMBED_TYPE=shared
 -      INSTALL_IT="\$(mkinstalldirs) \$(INSTALL_ROOT)\$(prefix)/lib; \$(INSTALL) -m 0755 $SAPI_SHARED \$(INSTALL_ROOT)\$(prefix)/lib"
 +      EXTRA_LDFLAGS="$EXTRA_LDFLAGS -release \$(PHP_MAJOR_VERSION).\$(PHP_MINOR_VERSION)"
 +      INSTALL_IT="\$(mkinstalldirs) \$(INSTALL_ROOT)\$(libdir); \$(LIBTOOL) --mode=install \$(INSTALL) -m 0755 \$(OVERALL_TARGET) \$(INSTALL_ROOT)\$(libdir)"
        ;;
      static)
-       LIBPHP_CFLAGS="-static"
-diff -up ./scripts/php-config.in.embed ./scripts/php-config.in
---- ./scripts/php-config.in.embed	2020-07-07 12:54:42.000000000 +0200
-+++ ./scripts/php-config.in	2020-07-07 13:51:05.880764968 +0200
+       PHP_EMBED_TYPE=static
+diff -up php-5.5.30/scripts/php-config.in.old php-5.5.30/scripts/php-config.in
+--- php-5.5.30/scripts/php-config.in.old	2015-10-19 15:17:31.944747715 +0200
++++ php-5.5.30/scripts/php-config.in	2015-10-19 15:17:58.278858083 +0200
 @@ -18,7 +18,7 @@ exe_extension="@EXEEXT@"
  php_cli_binary=NONE
  php_cgi_binary=NONE
  configure_options="@CONFIGURE_OPTIONS@"
 -php_sapis="@PHP_INSTALLED_SAPIS@"
-+php_sapis="apache2handler litespeed fpm phpdbg @PHP_INSTALLED_SAPIS@"
- ini_dir="@EXPANDED_PHP_CONFIG_FILE_SCAN_DIR@"
- ini_path="@EXPANDED_PHP_CONFIG_FILE_PATH@"
++php_sapis="apache2handler embed fpm @PHP_INSTALLED_SAPIS@"
  
+ # Set php_cli_binary and php_cgi_binary if available
+ for sapi in $php_sapis; do

SOURCES/php-5.6.3-phpinfo.patch

@@ -0,0 +1,27 @@
+
+Drop "Configure Command" from phpinfo as it doesn't
+provide any useful information.
+The available extensions are not related to this command.
+
+--- php-5.4.9/ext/standard/info.c.orig	2012-12-11 10:43:02.450578276 +0100
++++ php-5.4.9/ext/standard/info.c	2012-12-11 10:44:12.530820821 +0100
+@@ -743,9 +743,6 @@
+ #ifdef ARCHITECTURE
+ 		php_info_print_table_row(2, "Architecture", ARCHITECTURE);
+ #endif
+-#ifdef CONFIGURE_COMMAND
+-		php_info_print_table_row(2, "Configure Command", CONFIGURE_COMMAND );
+-#endif
+ 
+ 		if (sapi_module.pretty_name) {
+ 			php_info_print_table_row(2, "Server API", sapi_module.pretty_name );
+--- php-5.4.9/ext/standard/tests/general_functions/phpinfo.phpt.orig	2012-12-11 11:07:26.959156091 +0100
++++ php-5.4.9/ext/standard/tests/general_functions/phpinfo.phpt	2012-12-11 11:07:30.899170970 +0100
+@@ -20,7 +20,6 @@
+ 
+ System => %s
+ Build Date => %s%a
+-Configure Command => %s
+ Server API => Command Line Interface
+ Virtual Directory Support => %s
+ Configuration File (php.ini) Path => %s

SOURCES/php-7.1.7-httpd.patch

@@ -5,9 +5,10 @@ mod_php is build twice
 - as ZTS using --enable-maintainer-zts
 
 diff --git a/sapi/apache2handler/config.m4 b/sapi/apache2handler/config.m4
+index 2e64b21..ec4799f 100644
 --- a/sapi/apache2handler/config.m4
 +++ b/sapi/apache2handler/config.m4
-@@ -105,17 +105,6 @@ if test "$PHP_APXS2" != "no"; then
+@@ -116,17 +116,6 @@ if test "$PHP_APXS2" != "no"; then
      ;;
    esac
  
@@ -17,7 +18,7 @@ diff --git a/sapi/apache2handler/config.m4 b/sapi/apache2handler/config.m4
 -      PHP_BUILD_THREAD_SAFE
 -    fi
 -  else
--    APACHE_THREADED_MPM=`$APXS_HTTPD -V 2>/dev/null | grep 'threaded:.*yes'`
+-    APACHE_THREADED_MPM=`$APXS_HTTPD -V | grep 'threaded:.*yes'`
 -    if test -n "$APACHE_THREADED_MPM"; then
 -      PHP_BUILD_THREAD_SAFE
 -    fi

SOURCES/php-7.2.0-libdb.patch

@@ -1,7 +1,7 @@
-diff -up ./ext/dba/config.m4.libdb ./ext/dba/config.m4
---- ./ext/dba/config.m4.libdb	2020-04-09 14:06:11.000000000 +0200
-+++ ./ext/dba/config.m4	2020-04-09 14:35:08.208605065 +0200
-@@ -375,61 +375,13 @@ if test "$PHP_DB4" != "no"; then
+diff -up php-7.2.0alpha0/ext/dba/config.m4.libdb php-7.2.0alpha0/ext/dba/config.m4
+--- php-7.2.0alpha0/ext/dba/config.m4.libdb	2017-05-29 08:56:06.000000000 +0200
++++ php-7.2.0alpha0/ext/dba/config.m4	2017-05-29 09:13:52.014823282 +0200
+@@ -346,61 +346,13 @@ if test "$PHP_DB4" != "no"; then
    dbdp4="/usr/local/BerkeleyDB.4."
    dbdp5="/usr/local/BerkeleyDB.5."
    for i in $PHP_DB4 ${dbdp5}1 ${dbdp5}0 ${dbdp4}8 ${dbdp4}7 ${dbdp4}6 ${dbdp4}5 ${dbdp4}4 ${dbdp4}3 ${dbdp4}2 ${dbdp4}1 ${dbdp}0 /usr/local /usr; do
@@ -65,21 +65,21 @@ diff -up ./ext/dba/config.m4.libdb ./ext/dba/config.m4
  fi
  PHP_DBA_STD_RESULT(db4,Berkeley DB4)
  
-diff -up ./ext/dba/dba.c.libdb ./ext/dba/dba.c
---- ./ext/dba/dba.c.libdb	2020-04-09 14:06:11.000000000 +0200
-+++ ./ext/dba/dba.c	2020-04-09 14:36:30.593275190 +0200
-@@ -50,6 +50,10 @@
+diff -up php-7.2.0alpha0/ext/dba/dba.c.libdb php-7.2.0alpha0/ext/dba/dba.c
+--- php-7.2.0alpha0/ext/dba/dba.c.libdb	2017-05-29 09:16:15.736628202 +0200
++++ php-7.2.0alpha0/ext/dba/dba.c	2017-05-29 09:16:20.494654746 +0200
+@@ -53,6 +53,10 @@
+ #include "php_tcadb.h"
  #include "php_lmdb.h"
- #include "dba_arginfo.h"
  
 +#ifdef DB4_INCLUDE_FILE
 +#include DB4_INCLUDE_FILE
 +#endif
 +
- PHP_MINIT_FUNCTION(dba);
- PHP_MSHUTDOWN_FUNCTION(dba);
- PHP_MINFO_FUNCTION(dba);
-@@ -459,6 +463,10 @@ PHP_MINFO_FUNCTION(dba)
+ /* {{{ arginfo */
+ ZEND_BEGIN_ARG_INFO_EX(arginfo_dba_popen, 0, 0, 2)
+ 	ZEND_ARG_INFO(0, path)
+@@ -558,6 +562,10 @@ PHP_MINFO_FUNCTION(dba)
  
  	php_info_print_table_start();
   	php_info_print_table_row(2, "DBA support", "enabled");

SOURCES/php-7.2.12-phpize.patch

@@ -1,7 +1,7 @@
-diff -up ./scripts/phpize.in.headers ./scripts/phpize.in
---- ./scripts/phpize.in.headers	2019-07-23 10:05:11.000000000 +0200
-+++ ./scripts/phpize.in	2019-07-23 10:18:13.648098089 +0200
-@@ -165,6 +165,15 @@ phpize_autotools()
+diff -up php-7.2.12RC1/scripts/phpize.in.headers php-7.2.12RC1/scripts/phpize.in
+--- php-7.2.12RC1/scripts/phpize.in.headers	2018-10-23 11:47:43.000000000 +0200
++++ php-7.2.12RC1/scripts/phpize.in	2018-10-23 11:49:51.651818777 +0200
+@@ -162,6 +162,15 @@ phpize_autotools()
    $PHP_AUTOHEADER || exit 1
  }
  
@@ -17,7 +17,7 @@ diff -up ./scripts/phpize.in.headers ./scripts/phpize.in
  # Main script
  
  case "$1" in
-@@ -183,12 +192,15 @@ case "$1" in
+@@ -180,12 +189,15 @@ case "$1" in
  
    # Version
    --version|-v)

SOURCES/php-7.2.16-systzdata-v17.patch

@@ -5,11 +5,7 @@ Add support for use of the system timezone database, rather
 than embedding a copy.  Discussed upstream but was not desired.
 
 History:
-r21: retrieve tzdata version from /usr/share/zoneinfo/tzdata.zi
-r20: adapt for timelib 2020.03 (in 8.0.10RC1)
-r19: adapt for timelib 2020.02 (in 8.0.0beta2)
-r18: adapt for autotool change in 7.3.3RC1
-r17: adapt for timelib 2018.01 (in 7.3.2RC1)
+r17: adapt for autotool change in 7.2.16RC1
 r16: adapt for timelib 2017.06 (in 7.2.3RC1)
 r15: adapt for timelib 2017.05beta7 (in 7.2.0RC1)
 r14: improve check for valid tz file
@@ -32,11 +28,10 @@ r3: fix a crash if /usr/share/zoneinfo doesn't exist (Raphael Geissert)
 r2: add filesystem trawl to set up name alias index
 r1: initial revision
 
-diff --git a/ext/date/config0.m4 b/ext/date/config0.m4
-index 20e4164aaa..a61243646d 100644
---- a/ext/date/config0.m4
-+++ b/ext/date/config0.m4
-@@ -4,6 +4,19 @@ AC_CHECK_HEADERS([io.h])
+diff -up php-7.2.16RC1/ext/date/config0.m4.systzdata php-7.2.16RC1/ext/date/config0.m4
+--- php-7.2.16RC1/ext/date/config0.m4.systzdata	2019-02-19 11:22:22.223741585 +0100
++++ php-7.2.16RC1/ext/date/config0.m4	2019-02-19 11:23:05.089111556 +0100
+@@ -10,6 +10,19 @@ io.h
  dnl Check for strtoll, atoll
  AC_CHECK_FUNCS(strtoll atoll)
  
@@ -56,11 +51,10 @@ index 20e4164aaa..a61243646d 100644
  PHP_DATE_CFLAGS="-I@ext_builddir@/lib -DZEND_ENABLE_STATIC_TSRMLS_CACHE=1 -DHAVE_TIMELIB_CONFIG_H=1"
  timelib_sources="lib/astro.c lib/dow.c lib/parse_date.c lib/parse_tz.c
                   lib/timelib.c lib/tm2unixtime.c lib/unixtime2tm.c lib/parse_iso_intervals.c lib/interval.c"
-diff --git a/ext/date/lib/parse_tz.c b/ext/date/lib/parse_tz.c
-index e9bd0f136d..c04ff01adc 100644
---- a/ext/date/lib/parse_tz.c
-+++ b/ext/date/lib/parse_tz.c
-@@ -26,8 +26,21 @@
+diff -up php-7.2.16RC1/ext/date/lib/parse_tz.c.systzdata php-7.2.16RC1/ext/date/lib/parse_tz.c
+--- php-7.2.16RC1/ext/date/lib/parse_tz.c.systzdata	2019-02-19 11:13:22.000000000 +0100
++++ php-7.2.16RC1/ext/date/lib/parse_tz.c	2019-02-19 11:19:40.245313535 +0100
+@@ -25,8 +25,21 @@
  #include "timelib.h"
  #include "timelib_private.h"
  
@@ -82,7 +76,7 @@ index e9bd0f136d..c04ff01adc 100644
  
  #if (defined(__APPLE__) || defined(__APPLE_CC__)) && (defined(__BIG_ENDIAN__) || defined(__LITTLE_ENDIAN__))
  # if defined(__LITTLE_ENDIAN__)
-@@ -94,6 +107,11 @@ static int read_php_preamble(const unsigned char **tzf, timelib_tzinfo *tz)
+@@ -67,6 +80,11 @@ static int read_php_preamble(const unsig
  {
  	uint32_t version;
  
@@ -94,11 +88,11 @@ index e9bd0f136d..c04ff01adc 100644
  	/* read ID */
  	version = (*tzf)[3] - '0';
  	*tzf += 4;
-@@ -435,7 +453,467 @@ void timelib_dump_tzinfo(timelib_tzinfo *tz)
+@@ -374,7 +392,429 @@ void timelib_dump_tzinfo(timelib_tzinfo
  	}
  }
  
--static int seek_to_tz_position(const unsigned char **tzf, const char *timezone, const timelib_tzdb *tzdb)
+-static int seek_to_tz_position(const unsigned char **tzf, char *timezone, const timelib_tzdb *tzdb)
 +#ifdef HAVE_SYSTEM_TZDATA
 +
 +#ifdef HAVE_SYSTEM_TZDATA_PREFIX
@@ -325,44 +319,6 @@ index e9bd0f136d..c04ff01adc 100644
 +}
 +
 +
-+/* Retrieve tzdata version. */
-+static void retrieve_zone_version(timelib_tzdb *db)
-+{
-+    static char buf[30];
-+    char path[PATH_MAX];
-+    FILE *fp;
-+
-+    strncpy(path, ZONEINFO_PREFIX "/tzdata.zi", sizeof(path));
-+
-+    fp = fopen(path, "r");
-+    if (fp) {
-+		if (fgets(buf, sizeof(buf), fp)) {
-+			if (!memcmp(buf, "# version ", 10) &&
-+				isdigit(buf[10]) &&
-+				isdigit(buf[11]) &&
-+				isdigit(buf[12]) &&
-+				isdigit(buf[13]) &&
-+				islower(buf[14])) {
-+				if (buf[14] >= 't') {        /* 2022t = 2022.20 */
-+					buf[17] = 0;
-+					buf[16] = buf[14] - 't' + '0';
-+					buf[15] = '2';
-+				} else if (buf[14] >= 'j') { /* 2022j = 2022.10 */
-+					buf[17] = 0;
-+					buf[16] = buf[14] - 'j' + '0';
-+					buf[15] = '1';
-+				} else {                     /* 2022a = 2022.1  */
-+					buf[16] = 0;
-+					buf[15] = buf[14] - 'a' + '1';
-+				}
-+				buf[14] = '.';
-+				db->version = buf+10;
-+			}
-+		}
-+		fclose(fp);
-+    }
-+}
-+
 +/* Create the zone identifier index by trawling the filesystem. */
 +static void create_zone_index(timelib_tzdb *db)
 +{
@@ -559,15 +515,15 @@ index e9bd0f136d..c04ff01adc 100644
 +
 +#endif
 +
-+static int inmem_seek_to_tz_position(const unsigned char **tzf, const char *timezone, const timelib_tzdb *tzdb)
++static int inmem_seek_to_tz_position(const unsigned char **tzf, char *timezone, const timelib_tzdb *tzdb)
  {
  	int left = 0, right = tzdb->index_size - 1;
  
-@@ -461,9 +939,49 @@ static int seek_to_tz_position(const unsigned char **tzf, const char *timezone,
+@@ -400,9 +840,48 @@ static int seek_to_tz_position(const uns
  	return 0;
  }
  
-+static int seek_to_tz_position(const unsigned char **tzf, const char *timezone,
++static int seek_to_tz_position(const unsigned char **tzf, char *timezone,
 +			       char **map, size_t *maplen,
 +			       const timelib_tzdb *tzdb)
 +{
@@ -600,7 +556,6 @@ index e9bd0f136d..c04ff01adc 100644
 +		tmp->version = "0.system";
 +		tmp->data = NULL;
 +		create_zone_index(tmp);
-+		retrieve_zone_version(tmp);
 +		system_location_table = create_location_table();
 +		fake_data_segment(tmp, system_location_table);
 +		timezonedb_system = tmp;
@@ -613,8 +568,8 @@ index e9bd0f136d..c04ff01adc 100644
  }
  
  const timelib_tzdb_index_entry *timelib_timezone_identifiers_list(const timelib_tzdb *tzdb, int *count)
-@@ -475,7 +993,30 @@ const timelib_tzdb_index_entry *timelib_timezone_identifiers_list(const timelib_
- int timelib_timezone_id_is_valid(const char *timezone, const timelib_tzdb *tzdb)
+@@ -414,7 +893,30 @@ const timelib_tzdb_index_entry *timelib_
+ int timelib_timezone_id_is_valid(char *timezone, const timelib_tzdb *tzdb)
  {
  	const unsigned char *tzf;
 -	return (seek_to_tz_position(&tzf, timezone, tzdb));
@@ -645,8 +600,8 @@ index e9bd0f136d..c04ff01adc 100644
  }
  
  static int skip_64bit_preamble(const unsigned char **tzf, timelib_tzinfo *tz)
-@@ -517,6 +1058,8 @@ static timelib_tzinfo* timelib_tzinfo_ctor(const char *name)
- timelib_tzinfo *timelib_parse_tzfile(const char *timezone, const timelib_tzdb *tzdb, int *error_code)
+@@ -456,12 +958,14 @@ static timelib_tzinfo* timelib_tzinfo_ct
+ timelib_tzinfo *timelib_parse_tzfile(char *timezone, const timelib_tzdb *tzdb, int *error_code)
  {
  	const unsigned char *tzf;
 +	char *memmap = NULL;
@@ -654,19 +609,18 @@ index e9bd0f136d..c04ff01adc 100644
  	timelib_tzinfo *tmp;
  	int version;
  	int transitions_result, types_result;
-@@ -524,7 +1067,7 @@ timelib_tzinfo *timelib_parse_tzfile(const char *timezone, const timelib_tzdb *t
- 
- 	*error_code = TIMELIB_ERROR_NO_ERROR;
+ 	unsigned int type; /* TIMELIB_TZINFO_PHP or TIMELIB_TZINFO_ZONEINFO */
  
 -	if (seek_to_tz_position(&tzf, timezone, tzdb)) {
 +	if (seek_to_tz_position(&tzf, timezone, &memmap, &maplen, tzdb)) {
  		tmp = timelib_tzinfo_ctor(timezone);
  
  		version = read_preamble(&tzf, tmp, &type);
-@@ -563,11 +1106,36 @@ timelib_tzinfo *timelib_parse_tzfile(const char *timezone, const timelib_tzdb *t
+@@ -484,6 +988,29 @@ timelib_tzinfo *timelib_parse_tzfile(cha
+ 			timelib_tzinfo_dtor(tmp);
+ 			return NULL;
  		}
- 		skip_posix_string(&tzf, tmp);
- 
++
 +#ifdef HAVE_SYSTEM_TZDATA
 +		if (memmap) {
 +			const struct location_info *li;
@@ -689,8 +643,10 @@ index e9bd0f136d..c04ff01adc 100644
 +			munmap(memmap, maplen);
 +		} else {
 +#endif
- 		if (type == TIMELIB_TZINFO_PHP) {
- 			read_location(&tzf, tmp);
+ 		if (version == 2 || version == 3) {
+ 			if (!skip_64bit_preamble(&tzf, tmp)) {
+ 				/* 64 bit preamble is not in place */
+@@ -501,6 +1028,9 @@ timelib_tzinfo *timelib_parse_tzfile(cha
  		} else {
  			set_default_location_and_comments(&tzf, tmp);
  		}
@@ -700,19 +656,3 @@ index e9bd0f136d..c04ff01adc 100644
  	} else {
  		*error_code = TIMELIB_ERROR_NO_SUCH_TIMEZONE;
  		tmp = NULL;
-diff --git a/ext/date/php_date.c b/ext/date/php_date.c
-index 2d5cffb963..389f09f313 100644
---- a/ext/date/php_date.c
-+++ b/ext/date/php_date.c
-@@ -457,7 +457,11 @@ PHP_MINFO_FUNCTION(date)
- 	php_info_print_table_row(2, "date/time support", "enabled");
- 	php_info_print_table_row(2, "timelib version", TIMELIB_ASCII_VERSION);
- 	php_info_print_table_row(2, "\"Olson\" Timezone Database Version", tzdb->version);
-+#ifdef HAVE_SYSTEM_TZDATA
-+	php_info_print_table_row(2, "Timezone Database", "system");
-+#else
- 	php_info_print_table_row(2, "Timezone Database", php_date_global_timezone_db_enabled ? "external" : "internal");
-+#endif
- 	php_info_print_table_row(2, "Default timezone", guess_timezone(tzdb));
- 	php_info_print_table_end();
- 

SOURCES/php-7.2.3-ldap_r.patch

@@ -1,12 +1,12 @@
 
 Use -lldap_r by default.
 
-diff -up php-7.4.0RC2/ext/ldap/config.m4.ldap_r php-7.4.0RC2/ext/ldap/config.m4
---- php-7.4.0RC2/ext/ldap/config.m4.ldap_r	2019-09-17 10:21:24.769200812 +0200
-+++ php-7.4.0RC2/ext/ldap/config.m4	2019-09-17 10:21:30.658181771 +0200
-@@ -68,7 +68,11 @@ if test "$PHP_LDAP" != "no"; then
-   dnl -pc removal is a hack for clang
-   MACHINE_INCLUDES=$($CC -dumpmachine | $SED 's/-pc//')
+diff -up php-7.2.3RC1/ext/ldap/config.m4.ldap_r php-7.2.3RC1/ext/ldap/config.m4
+--- php-7.2.3RC1/ext/ldap/config.m4.ldap_r	2018-02-14 06:05:11.553142812 +0100
++++ php-7.2.3RC1/ext/ldap/config.m4	2018-02-14 06:07:31.179816122 +0100
+@@ -119,7 +119,11 @@ if test "$PHP_LDAP" != "no"; then
+ 
+   MACHINE_INCLUDES=$($CC -dumpmachine)
  
 -  if test -f $LDAP_LIBDIR/liblber.a || test -f $LDAP_LIBDIR/liblber.$SHLIB_SUFFIX_NAME || test -f $LDAP_LIBDIR/$MACHINE_INCLUDES/liblber.a || test -f $LDAP_LIBDIR/$MACHINE_INCLUDES/liblber.$SHLIB_SUFFIX_NAME; then
 +  if test -f $LDAP_LIBDIR/libldap_r.$SHLIB_SUFFIX_NAME; then

SOURCES/php-7.2.4-dlopen.patch

@@ -0,0 +1,30 @@
+diff -up php-7.2.4RC1/sapi/litespeed/lsapilib.c.dlopen php-7.2.4RC1/sapi/litespeed/lsapilib.c
+--- php-7.2.4RC1/sapi/litespeed/lsapilib.c.dlopen	2018-03-13 12:40:25.330885880 +0100
++++ php-7.2.4RC1/sapi/litespeed/lsapilib.c	2018-03-13 12:41:35.797251042 +0100
+@@ -755,7 +755,7 @@ static int (*fp_lve_leave)(struct liblve
+ static int (*fp_lve_jail)( struct passwd *, char *) = NULL;
+ static int lsapi_load_lve_lib(void)
+ {
+-    s_liblve = dlopen("liblve.so.0", RTLD_LAZY);
++    s_liblve = dlopen("liblve.so.0", RTLD_NOW);
+     if (s_liblve)
+     {
+         fp_lve_is_available = dlsym(s_liblve, "lve_is_available");
+diff -up php-7.2.4RC1/Zend/zend_portability.h.dlopen php-7.2.4RC1/Zend/zend_portability.h
+--- php-7.2.4RC1/Zend/zend_portability.h.dlopen	2018-03-13 12:33:38.000000000 +0100
++++ php-7.2.4RC1/Zend/zend_portability.h	2018-03-13 12:40:25.330885880 +0100
+@@ -144,11 +144,11 @@
+ # endif
+ 
+ # if defined(RTLD_GROUP) && defined(RTLD_WORLD) && defined(RTLD_PARENT)
+-#  define DL_LOAD(libname)			dlopen(libname, RTLD_LAZY | RTLD_GLOBAL | RTLD_GROUP | RTLD_WORLD | RTLD_PARENT)
++#  define DL_LOAD(libname)			dlopen(libname, RTLD_NOW  | RTLD_GLOBAL | RTLD_GROUP | RTLD_WORLD | RTLD_PARENT)
+ # elif defined(RTLD_DEEPBIND) && !defined(__SANITIZE_ADDRESS__)
+-#  define DL_LOAD(libname)			dlopen(libname, RTLD_LAZY | RTLD_GLOBAL | RTLD_DEEPBIND)
++#  define DL_LOAD(libname)			dlopen(libname, RTLD_NOW  | RTLD_GLOBAL | RTLD_DEEPBIND)
+ # else
+-#  define DL_LOAD(libname)			dlopen(libname, RTLD_LAZY | RTLD_GLOBAL)
++#  define DL_LOAD(libname)			dlopen(libname, RTLD_NOW  | RTLD_GLOBAL)
+ # endif
+ # define DL_UNLOAD					dlclose
+ # if defined(DLSYM_NEEDS_UNDERSCORE)

SOURCES/php-7.2.4-fixheader.patch

@@ -0,0 +1,12 @@
+diff -up php-7.2.4RC1/configure.ac.fixheader php-7.2.4RC1/configure.ac
+--- php-7.2.4RC1/configure.ac.fixheader	2018-03-13 12:42:47.594623100 +0100
++++ php-7.2.4RC1/configure.ac	2018-03-13 12:43:35.591871825 +0100
+@@ -1275,7 +1275,7 @@ PHP_BUILD_DATE=`date -u +%Y-%m-%d`
+ fi
+ AC_DEFINE_UNQUOTED(PHP_BUILD_DATE,"$PHP_BUILD_DATE",[PHP build date])
+ 
+-PHP_UNAME=`uname -a | xargs`
++PHP_UNAME=`uname | xargs`
+ AC_DEFINE_UNQUOTED(PHP_UNAME,"$PHP_UNAME",[uname -a output])
+ PHP_OS=`uname | xargs`
+ AC_DEFINE_UNQUOTED(PHP_OS,"$PHP_OS",[uname output])

SOURCES/php-7.2.7-getallheaders.patch

@@ -0,0 +1,280 @@
+Adapted for 7.2.7 from 7.3 by remi
+
+
+From 0ea4013f101d64fbeb9221260b36e98f10ed1ddd Mon Sep 17 00:00:00 2001
+From: Remi Collet <remi@remirepo.net>
+Date: Wed, 4 Jul 2018 08:48:38 +0200
+Subject: [PATCH] Fixed bug #62596 add getallheaders (apache_request_headers)
+ missing function in FPM add sapi_add_request_header in public API (was
+ add_request_header) fix arginfo for fastcgi_finish_request fucntion
+
+---
+ main/SAPI.c                       | 50 +++++++++++++++++++++++++++++
+ main/SAPI.h                       |  1 +
+ sapi/cgi/cgi_main.c               | 51 +----------------------------
+ sapi/fpm/fpm/fpm_main.c           | 25 ++++++++++++++-
+ sapi/fpm/tests/getallheaders.phpt | 67 +++++++++++++++++++++++++++++++++++++++
+ 5 files changed, 143 insertions(+), 51 deletions(-)
+ create mode 100644 sapi/fpm/tests/getallheaders.phpt
+
+diff --git a/main/SAPI.c b/main/SAPI.c
+index b6c3329..7e0c7c8 100644
+--- a/main/SAPI.c
++++ b/main/SAPI.c
+@@ -1104,6 +1104,56 @@ SAPI_API void sapi_terminate_process(void) {
+ 	}
+ }
+ 
++SAPI_API void sapi_add_request_header(char *var, unsigned int var_len, char *val, unsigned int val_len, void *arg) /* {{{ */
++{
++	zval *return_value = (zval*)arg;
++	char *str = NULL;
++
++	ALLOCA_FLAG(use_heap)
++
++	if (var_len > 5 &&
++	    var[0] == 'H' &&
++	    var[1] == 'T' &&
++	    var[2] == 'T' &&
++	    var[3] == 'P' &&
++	    var[4] == '_') {
++
++		char *p;
++
++		var_len -= 5;
++		p = var + 5;
++		var = str = do_alloca(var_len + 1, use_heap);
++		*str++ = *p++;
++		while (*p) {
++			if (*p == '_') {
++				*str++ = '-';
++				p++;
++				if (*p) {
++					*str++ = *p++;
++				}
++			} else if (*p >= 'A' && *p <= 'Z') {
++				*str++ = (*p++ - 'A' + 'a');
++			} else {
++				*str++ = *p++;
++			}
++		}
++		*str = 0;
++	} else if (var_len == sizeof("CONTENT_TYPE")-1 &&
++	           memcmp(var, "CONTENT_TYPE", sizeof("CONTENT_TYPE")-1) == 0) {
++		var = "Content-Type";
++	} else if (var_len == sizeof("CONTENT_LENGTH")-1 &&
++	           memcmp(var, "CONTENT_LENGTH", sizeof("CONTENT_LENGTH")-1) == 0) {
++		var = "Content-Length";
++	} else {
++		return;
++	}
++	add_assoc_stringl_ex(return_value, var, var_len, val, val_len);
++	if (str) {
++		free_alloca(var, use_heap);
++	}
++}
++/* }}} */
++
+ /*
+  * Local variables:
+  * tab-width: 4
+diff --git a/main/SAPI.h b/main/SAPI.h
+index f829fd7..4b8e223 100644
+--- a/main/SAPI.h
++++ b/main/SAPI.h
+@@ -151,6 +151,7 @@ SAPI_API void sapi_shutdown(void);
+ SAPI_API void sapi_activate(void);
+ SAPI_API void sapi_deactivate(void);
+ SAPI_API void sapi_initialize_empty_request(void);
++SAPI_API void sapi_add_request_header(char *var, unsigned int var_len, char *val, unsigned int val_len, void *arg);
+ END_EXTERN_C()
+ 
+ /*
+diff --git a/sapi/cgi/cgi_main.c b/sapi/cgi/cgi_main.c
+index 2e9cefe..350846d 100644
+--- a/sapi/cgi/cgi_main.c
++++ b/sapi/cgi/cgi_main.c
+@@ -1591,54 +1591,6 @@ PHP_FUNCTION(apache_child_terminate) /*
+ }
+ /* }}} */
+ 
+-static void add_request_header(char *var, unsigned int var_len, char *val, unsigned int val_len, void *arg) /* {{{ */
+-{
+-	zval *return_value = (zval*)arg;
+-	char *str = NULL;
+-	char *p;
+-	ALLOCA_FLAG(use_heap)
+-
+-	if (var_len > 5 &&
+-	    var[0] == 'H' &&
+-	    var[1] == 'T' &&
+-	    var[2] == 'T' &&
+-	    var[3] == 'P' &&
+-	    var[4] == '_') {
+-
+-		var_len -= 5;
+-		p = var + 5;
+-		var = str = do_alloca(var_len + 1, use_heap);
+-		*str++ = *p++;
+-		while (*p) {
+-			if (*p == '_') {
+-				*str++ = '-';
+-				p++;
+-				if (*p) {
+-					*str++ = *p++;
+-				}
+-			} else if (*p >= 'A' && *p <= 'Z') {
+-				*str++ = (*p++ - 'A' + 'a');
+-			} else {
+-				*str++ = *p++;
+-			}
+-		}
+-		*str = 0;
+-	} else if (var_len == sizeof("CONTENT_TYPE")-1 &&
+-	           memcmp(var, "CONTENT_TYPE", sizeof("CONTENT_TYPE")-1) == 0) {
+-		var = "Content-Type";
+-	} else if (var_len == sizeof("CONTENT_LENGTH")-1 &&
+-	           memcmp(var, "CONTENT_LENGTH", sizeof("CONTENT_LENGTH")-1) == 0) {
+-		var = "Content-Length";
+-	} else {
+-		return;
+-	}
+-	add_assoc_stringl_ex(return_value, var, var_len, val, val_len);
+-	if (str) {
+-		free_alloca(var, use_heap);
+-	}
+-}
+-/* }}} */
+-
+ PHP_FUNCTION(apache_request_headers) /* {{{ */
+ {
+ 	if (zend_parse_parameters_none()) {
+@@ -1648,7 +1600,7 @@ PHP_FUNCTION(apache_request_headers) /*
+ 	if (fcgi_is_fastcgi()) {
+ 		fcgi_request *request = (fcgi_request*) SG(server_context);
+ 
+-		fcgi_loadenv(request, add_request_header, return_value);
++		fcgi_loadenv(request, sapi_add_request_header, return_value);
+ 	} else {
+ 		char buf[128];
+ 		char **env, *p, *q, *var, *val, *t = buf;
+diff --git a/sapi/fpm/fpm/fpm_main.c b/sapi/fpm/fpm/fpm_main.c
+index 3256660..e815be4 100644
+--- a/sapi/fpm/fpm/fpm_main.c
++++ b/sapi/fpm/fpm/fpm_main.c
+@@ -1533,6 +1533,10 @@ PHP_FUNCTION(fastcgi_finish_request) /* {{{ */
+ {
+ 	fcgi_request *request = (fcgi_request*) SG(server_context);
+ 
++	if (zend_parse_parameters_none() == FAILURE) {
++		return;
++	}
++
+ 	if (!fcgi_is_closed(request)) {
+ 		php_output_end_all();
+ 		php_header();
+@@ -1547,8 +1551,27 @@ PHP_FUNCTION(fastcgi_finish_request) /* {{{ */
+ }
+ /* }}} */
+ 
++ZEND_BEGIN_ARG_INFO(cgi_fcgi_sapi_no_arginfo, 0)
++ZEND_END_ARG_INFO()
++
++PHP_FUNCTION(apache_request_headers) /* {{{ */
++{
++	fcgi_request *request;
++
++	if (zend_parse_parameters_none() == FAILURE) {
++		return;
++	}
++
++	array_init(return_value);
++	if ((request = (fcgi_request*) SG(server_context))) {
++		fcgi_loadenv(request, sapi_add_request_header, return_value);
++	}
++} /* }}} */
++
+ static const zend_function_entry cgi_fcgi_sapi_functions[] = {
+-	PHP_FE(fastcgi_finish_request,              NULL)
++	PHP_FE(fastcgi_finish_request,                    cgi_fcgi_sapi_no_arginfo)
++	PHP_FE(apache_request_headers,                    cgi_fcgi_sapi_no_arginfo)
++	PHP_FALIAS(getallheaders, apache_request_headers, cgi_fcgi_sapi_no_arginfo)
+ 	PHP_FE_END
+ };
+ 
+diff --git a/sapi/fpm/tests/getallheaders.phpt b/sapi/fpm/tests/getallheaders.phpt
+new file mode 100644
+index 0000000..b41f1c6
+--- /dev/null
++++ b/sapi/fpm/tests/getallheaders.phpt
+@@ -0,0 +1,67 @@
++--TEST--
++FPM: Function getallheaders basic test
++--SKIPIF--
++<?php include "skipif.inc"; ?>
++--FILE--
++<?php
++
++require_once "tester.inc";
++
++$cfg = <<<EOT
++[global]
++error_log = {{FILE:LOG}}
++[unconfined]
++listen = {{ADDR}}
++pm = dynamic
++pm.max_children = 5
++pm.start_servers = 1
++pm.min_spare_servers = 1
++pm.max_spare_servers = 3
++EOT;
++
++$code = <<<EOT
++<?php
++echo "Test Start\n";
++var_dump(getallheaders());
++echo "Test End\n";
++EOT;
++
++$headers = [];
++$tester = new FPM\Tester($cfg, $code);
++$tester->start();
++$tester->expectLogStartNotices();
++$tester->request(
++		'', 
++		[
++			'HTTP_X_FOO' => 'BAR',
++			'HTTP_FOO'   => 'foo'
++		]
++	)->expectBody(
++		[
++			'Test Start',
++			'array(4) {',
++			'  ["Foo"]=>',
++			'  string(3) "foo"',
++			'  ["X-Foo"]=>',
++			'  string(3) "BAR"',
++			'  ["Content-Length"]=>',
++			'  string(1) "0"',
++			'  ["Content-Type"]=>',
++			'  string(0) ""',
++			'}',
++			'Test End',
++		]
++	);
++$tester->terminate();
++$tester->expectLogTerminatingNotices();
++$tester->close();
++
++?>
++Done
++--EXPECT--
++Done
++--CLEAN--
++<?php
++require_once "tester.inc";
++FPM\Tester::clean();
++?>
+-- 
+2.1.4
+

SOURCES/php-7.4.0-datetests.patch

@@ -1,98 +0,0 @@
-diff -up ./ext/date/tests/bug33414-2.phpt.datetests ./ext/date/tests/bug33414-2.phpt
---- ./ext/date/tests/bug33414-2.phpt.datetests	2020-04-09 14:06:11.000000000 +0200
-+++ ./ext/date/tests/bug33414-2.phpt	2020-04-09 14:40:00.809433489 +0200
-@@ -74,10 +74,10 @@ $strtotime_tstamp = strtotime("next Frid
- print "result=".date("l Y-m-d H:i:s T I", $strtotime_tstamp)."\n";
- print "wanted=Friday            00:00:00\n\n";
- ?>
----EXPECT--
-+--EXPECTF--
- TZ=Pacific/Rarotonga - wrong day.
--tStamp=Thursday 1970-01-01 17:17:17 -1030 0
--result=Tuesday 1970-01-06 00:00:00 -1030 0
-+tStamp=Thursday 1970-01-01 17:17:17 %s
-+result=Tuesday 1970-01-06 00:00:00 %s
- wanted=Tuesday            00:00:00
- 
- TZ=Atlantic/South_Georgia - wrong day.
-@@ -91,13 +91,13 @@ result=Monday 2005-04-04 00:00:00 EDT 1
- wanted=Monday            00:00:00
- 
- TZ=Pacific/Enderbury - wrong day, off by 2 days.
--tStamp=Thursday 1970-01-01 17:17:17 -12 0
--result=Monday 1970-01-05 00:00:00 -12 0
-+tStamp=Thursday 1970-01-01 17:17:17 %s
-+result=Monday 1970-01-05 00:00:00 %s
- wanted=Monday            00:00:00
- 
- TZ=Pacific/Kiritimati - wrong day, off by 2 days.
--tStamp=Thursday 1970-01-01 17:17:17 -1040 0
--result=Monday 1970-01-05 00:00:00 -1040 0
-+tStamp=Thursday 1970-01-01 17:17:17 %s
-+result=Monday 1970-01-05 00:00:00 %s
- wanted=Monday            00:00:00
- 
- TZ=America/Managua - wrong day.
-@@ -106,13 +106,13 @@ result=Tuesday 2005-04-12 00:00:00 CDT 1
- wanted=Tuesday            00:00:00
- 
- TZ=Pacific/Pitcairn - wrong day.
--tStamp=Thursday 1970-01-01 17:17:17 -0830 0
--result=Wednesday 1970-01-07 00:00:00 -0830 0
-+tStamp=Thursday 1970-01-01 17:17:17 %s
-+result=Wednesday 1970-01-07 00:00:00 %s
- wanted=Wednesday            00:00:00
- 
- TZ=Pacific/Fakaofo - wrong day.
--tStamp=Thursday 1970-01-01 17:17:17 -11 0
--result=Saturday 1970-01-03 00:00:00 -11 0
-+tStamp=Thursday 1970-01-01 17:17:17 %s
-+result=Saturday 1970-01-03 00:00:00 %s
- wanted=Saturday            00:00:00
- 
- TZ=Pacific/Johnston - wrong day.
-diff -up ./ext/date/tests/bug66985.phpt.datetests ./ext/date/tests/bug66985.phpt
---- ./ext/date/tests/bug66985.phpt.datetests	2020-04-09 14:06:11.000000000 +0200
-+++ ./ext/date/tests/bug66985.phpt	2020-04-09 14:40:37.099288185 +0200
-@@ -3,7 +3,7 @@ Bug #66985 (Some timezones are no longer
- --FILE--
- <?php
- $zones = array(
--    "CST6CDT", "Cuba", "Egypt", "Eire", "EST5EDT", "Factory", "GB-Eire",
-+    "CST6CDT", "Cuba", "Egypt", "Eire", "EST5EDT", "GB-Eire",
-     "GMT0", "Greenwich", "Hongkong", "Iceland", "Iran", "Israel", "Jamaica",
-     "Japan", "Kwajalein", "Libya", "MST7MDT", "Navajo", "NZ-CHAT", "Poland",
-     "Portugal", "PST8PDT", "Singapore", "Turkey", "Universal", "W-SU",
-@@ -45,11 +45,6 @@ DateTimeZone Object
- )
- DateTimeZone Object
- (
--    [timezone_type] => 3
--    [timezone] => Factory
--)
--DateTimeZone Object
--(
-     [timezone_type] => 3
-     [timezone] => GB-Eire
- )
-diff -up ./ext/date/tests/strtotime3-64bit.phpt.datetests ./ext/date/tests/strtotime3-64bit.phpt
---- ./ext/date/tests/strtotime3-64bit.phpt.datetests	2020-04-09 14:06:11.000000000 +0200
-+++ ./ext/date/tests/strtotime3-64bit.phpt	2020-04-09 14:40:00.809433489 +0200
-@@ -44,7 +44,7 @@ foreach ($strs as $str) {
- }
- 
- ?>
----EXPECT--
-+--EXPECTF--
- bool(false)
- bool(false)
- string(31) "Thu, 15 Jun 2006 00:00:00 +0100"
-@@ -53,7 +53,7 @@ bool(false)
- string(31) "Fri, 16 Jun 2006 23:49:12 +0100"
- bool(false)
- string(31) "Fri, 16 Jun 2006 02:22:00 +0100"
--string(31) "Sun, 16 Jun 0222 02:22:00 -0036"
-+string(31) "Sun, 16 Jun 0222 02:22:00 %s"
- string(31) "Fri, 16 Jun 2006 02:22:33 +0100"
- bool(false)
- string(31) "Tue, 02 Mar 2004 00:00:00 +0000"

SOURCES/php-8.0.0-phpinfo.patch

@@ -1,118 +0,0 @@
-
-Drop "Configure Command" from phpinfo as it doesn't
-provide any useful information.
-The available extensions are not related to this command.
-
-Replace full GCC name by gcc in php -v output
-
-
-Also apply
-
-From 9bf43c45908433d382f0499d529849172d0d8206 Mon Sep 17 00:00:00 2001
-From: Remi Collet <remi@remirepo.net>
-Date: Mon, 28 Dec 2020 08:33:09 +0100
-Subject: [PATCH] rename COMPILER and ARCHITECTURE macro (too generic)
-
----
- configure.ac             |  4 ++--
- ext/standard/info.c      |  8 ++++----
- sapi/cli/php_cli.c       |  8 ++++----
- win32/build/confutils.js | 10 +++++-----
- 4 files changed, 15 insertions(+), 15 deletions(-)
-
-diff --git a/configure.ac b/configure.ac
-index 9d9c8b155b07..143dc061346b 100644
---- a/configure.ac
-+++ b/configure.ac
-@@ -1289,10 +1289,10 @@ if test -n "${PHP_BUILD_PROVIDER}"; then
-   AC_DEFINE_UNQUOTED(PHP_BUILD_PROVIDER,"$PHP_BUILD_PROVIDER",[build provider])
- fi
- if test -n "${PHP_BUILD_COMPILER}"; then
--  AC_DEFINE_UNQUOTED(COMPILER,"$PHP_BUILD_COMPILER",[used compiler for build])
-+  AC_DEFINE_UNQUOTED(PHP_BUILD_COMPILER,"$PHP_BUILD_COMPILER",[used compiler for build])
- fi
- if test -n "${PHP_BUILD_ARCH}"; then
--  AC_DEFINE_UNQUOTED(ARCHITECTURE,"$PHP_BUILD_ARCH",[build architecture])
-+  AC_DEFINE_UNQUOTED(PHP_BUILD_ARCH,"$PHP_BUILD_ARCH",[build architecture])
- fi
- 
- PHP_SUBST_OLD(PHP_INSTALLED_SAPIS)
-diff --git a/ext/standard/info.c b/ext/standard/info.c
-index 153cb6cde014..8ceef31d9fe4 100644
---- a/ext/standard/info.c
-+++ b/ext/standard/info.c
-@@ -798,11 +798,11 @@ PHPAPI ZEND_COLD void php_print_info(int flag)
- #ifdef PHP_BUILD_PROVIDER
- 		php_info_print_table_row(2, "Build Provider", PHP_BUILD_PROVIDER);
- #endif
--#ifdef COMPILER
--		php_info_print_table_row(2, "Compiler", COMPILER);
-+#ifdef PHP_BUILD_COMPILER
-+		php_info_print_table_row(2, "Compiler", PHP_BUILD_COMPILER);
- #endif
--#ifdef ARCHITECTURE
--		php_info_print_table_row(2, "Architecture", ARCHITECTURE);
-+#ifdef PHP_BUILD_ARCH
-+		php_info_print_table_row(2, "Architecture", PHP_BUILD_ARCH);
- #endif
- #ifdef CONFIGURE_COMMAND
- 		php_info_print_table_row(2, "Configure Command", CONFIGURE_COMMAND );
-diff --git a/sapi/cli/php_cli.c b/sapi/cli/php_cli.c
-index 5092fb0ffd68..9d296acec631 100644
---- a/sapi/cli/php_cli.c
-+++ b/sapi/cli/php_cli.c
-@@ -640,12 +640,12 @@ static int do_cli(int argc, char **argv) /* {{{ */
- #else
- 					"NTS "
- #endif
--#ifdef COMPILER
--					COMPILER
-+#ifdef PHP_BUILD_COMPILER
-+					PHP_BUILD_COMPILER
- 					" "
- #endif
--#ifdef ARCHITECTURE
--					ARCHITECTURE
-+#ifdef PHP_BUILD_ARCH
-+					PHP_BUILD_ARCH
- 					" "
- #endif
- #if ZEND_DEBUG
-
-diff -up ./ext/standard/info.c.phpinfo ./ext/standard/info.c
---- ./ext/standard/info.c.phpinfo	2020-07-21 10:49:31.000000000 +0200
-+++ ./ext/standard/info.c	2020-07-21 11:41:56.295633523 +0200
-@@ -804,9 +804,6 @@ PHPAPI ZEND_COLD void php_print_info(int
- #ifdef PHP_BUILD_ARCH
- 		php_info_print_table_row(2, "Architecture", PHP_BUILD_ARCH);
- #endif
--#ifdef CONFIGURE_COMMAND
--		php_info_print_table_row(2, "Configure Command", CONFIGURE_COMMAND );
--#endif
- 
- 		if (sapi_module.pretty_name) {
- 			php_info_print_table_row(2, "Server API", sapi_module.pretty_name );
-diff -up ./ext/standard/tests/general_functions/phpinfo.phpt.phpinfo ./ext/standard/tests/general_functions/phpinfo.phpt
---- ./ext/standard/tests/general_functions/phpinfo.phpt.phpinfo	2020-07-21 10:49:31.000000000 +0200
-+++ ./ext/standard/tests/general_functions/phpinfo.phpt	2020-07-21 11:41:56.296633522 +0200
-@@ -17,7 +17,6 @@ PHP Version => %s
- 
- System => %s
- Build Date => %s%a
--Configure Command => %s
- Server API => Command Line Interface
- Virtual Directory Support => %s
- Configuration File (php.ini) Path => %s
-diff -up ./sapi/cli/php_cli.c.phpinfo ./sapi/cli/php_cli.c
---- ./sapi/cli/php_cli.c.phpinfo	2020-07-21 11:43:38.812475300 +0200
-+++ ./sapi/cli/php_cli.c	2020-07-21 11:43:45.783464540 +0200
-@@ -641,8 +641,7 @@ static int do_cli(int argc, char **argv)
- 					"NTS "
- #endif
- #ifdef PHP_BUILD_COMPILER
--					PHP_BUILD_COMPILER
--					" "
-+					"gcc "
- #endif
- #ifdef PHP_BUILD_ARCH
- 					PHP_BUILD_ARCH

SOURCES/php-8.0.10-phar-sha.patch

@@ -1,515 +0,0 @@
-Backported for 8.0 from
-
-
-From 8bb0c74e24359a11216824117ac3adf3d5ef7b71 Mon Sep 17 00:00:00 2001
-From: Remi Collet <remi@remirepo.net>
-Date: Thu, 5 Aug 2021 11:10:15 +0200
-Subject: [PATCH] switch phar to use sha256 signature by default
-
----
- ext/phar/phar/pharcommand.inc                  | 2 +-
- ext/phar/tests/create_new_and_modify.phpt      | 4 ++--
- ext/phar/tests/create_new_phar_c.phpt          | 4 ++--
- ext/phar/tests/phar_setsignaturealgo2.phpt     | 2 +-
- ext/phar/tests/tar/phar_setsignaturealgo2.phpt | 2 +-
- ext/phar/tests/zip/phar_setsignaturealgo2.phpt | 2 +-
- ext/phar/util.c                                | 6 +++---
- ext/phar/zip.c                                 | 2 +-
- 8 files changed, 12 insertions(+), 12 deletions(-)
-
-diff --git a/ext/phar/phar/pharcommand.inc b/ext/phar/phar/pharcommand.inc
-index a31290eee75fe..5f698b4bec26b 100644
---- a/ext/phar/phar/pharcommand.inc
-+++ b/ext/phar/phar/pharcommand.inc
-@@ -92,7 +92,7 @@ class PharCommand extends CLICommand
-                 'typ' => 'select',
-                 'val' => NULL,
-                 'inf' => '<method> Selects the hash algorithm.',
--                'select' => array('md5' => 'MD5','sha1' => 'SHA1')
-+                'select' => array('md5' => 'MD5','sha1' => 'SHA1', 'sha256' => 'SHA256', 'sha512' => 'SHA512', 'openssl' => 'OPENSSL')
-             ),
-             'i' => array(
-                 'typ' => 'regex',
-diff --git a/ext/phar/tests/create_new_and_modify.phpt b/ext/phar/tests/create_new_and_modify.phpt
-index 02e36c6cea2fe..32defcae8a639 100644
---- a/ext/phar/tests/create_new_and_modify.phpt
-+++ b/ext/phar/tests/create_new_and_modify.phpt
-@@ -49,8 +49,8 @@ include $pname . '/b.php';
- <?php unlink(__DIR__ . '/' . basename(__FILE__, '.clean.php') . '.phar.php'); ?>
- --EXPECTF--
- brand new!
--string(40) "%s"
--string(40) "%s"
-+string(%d) "%s"
-+string(%d) "%s"
- bool(true)
- modified!
- another!
-diff --git a/ext/phar/tests/create_new_phar_c.phpt b/ext/phar/tests/create_new_phar_c.phpt
-index 566d3c4d5f8ad..bf6d740fd1d10 100644
---- a/ext/phar/tests/create_new_phar_c.phpt
-+++ b/ext/phar/tests/create_new_phar_c.phpt
-@@ -20,7 +20,7 @@ var_dump($phar->getSignature());
- --EXPECTF--
- array(2) {
-   ["hash"]=>
--  string(40) "%s"
-+  string(64) "%s"
-   ["hash_type"]=>
--  string(5) "SHA-1"
-+  string(7) "SHA-256"
- }
-diff --git a/ext/phar/tests/phar_setsignaturealgo2.phpt b/ext/phar/tests/phar_setsignaturealgo2.phpt
-index 293d3196713d8..4f31836fbbbcc 100644
---- a/ext/phar/tests/phar_setsignaturealgo2.phpt
-+++ b/ext/phar/tests/phar_setsignaturealgo2.phpt
-@@ -52,7 +52,7 @@ array(2) {
-   ["hash"]=>
-   string(%d) "%s"
-   ["hash_type"]=>
--  string(5) "SHA-1"
-+  string(7) "SHA-256"
- }
- array(2) {
-   ["hash"]=>
-diff --git a/ext/phar/tests/tar/phar_setsignaturealgo2.phpt b/ext/phar/tests/tar/phar_setsignaturealgo2.phpt
-index 9923ac5c88476..cc10a241d739b 100644
---- a/ext/phar/tests/tar/phar_setsignaturealgo2.phpt
-+++ b/ext/phar/tests/tar/phar_setsignaturealgo2.phpt
-@@ -51,7 +51,7 @@ array(2) {
-   ["hash"]=>
-   string(%d) "%s"
-   ["hash_type"]=>
--  string(5) "SHA-1"
-+  string(7) "SHA-256"
- }
- array(2) {
-   ["hash"]=>
-diff --git a/ext/phar/tests/zip/phar_setsignaturealgo2.phpt b/ext/phar/tests/zip/phar_setsignaturealgo2.phpt
-index 8de77479d7825..60fec578ee894 100644
---- a/ext/phar/tests/zip/phar_setsignaturealgo2.phpt
-+++ b/ext/phar/tests/zip/phar_setsignaturealgo2.phpt
-@@ -78,7 +78,7 @@ array(2) {
-   ["hash"]=>
-   string(%d) "%s"
-   ["hash_type"]=>
--  string(5) "SHA-1"
-+  string(7) "SHA-256"
- }
- array(2) {
-   ["hash"]=>
-diff --git a/ext/phar/util.c b/ext/phar/util.c
-index 314acfe81a788..8d2db03b69601 100644
---- a/ext/phar/util.c
-+++ b/ext/phar/util.c
-@@ -1798,6 +1798,8 @@ int phar_create_signature(phar_archive_d
- 			*signature_length = 64;
- 			break;
- 		}
-+		default:
-+			phar->sig_flags = PHAR_SIG_SHA256;
- 		case PHAR_SIG_SHA256: {
- 			unsigned char digest[32];
- 			PHP_SHA256_CTX  context;
-@@ -1894,8 +1896,6 @@ int phar_create_signature(phar_archive_d
- 			*signature_length = siglen;
- 		}
- 		break;
--		default:
--			phar->sig_flags = PHAR_SIG_SHA1;
- 		case PHAR_SIG_SHA1: {
- 			unsigned char digest[20];
- 			PHP_SHA1_CTX  context;
-diff --git a/ext/phar/zip.c b/ext/phar/zip.c
-index 31d4bd2998215..c5e38cabf7b87 100644
---- a/ext/phar/zip.c
-+++ b/ext/phar/zip.c
-@@ -1423,7 +1423,7 @@ int phar_zip_flush(phar_archive_data *phar, char *user_stub, zend_long len, int
- 
- 	memcpy(eocd.signature, "PK\5\6", 4);
- 	if (!phar->is_data && !phar->sig_flags) {
--		phar->sig_flags = PHAR_SIG_SHA1;
-+		phar->sig_flags = PHAR_SIG_SHA256;
- 	}
- 	if (phar->sig_flags) {
- 		PHAR_SET_16(eocd.counthere, zend_hash_num_elements(&phar->manifest) + 1);
-
-From c51af22fef988c1b2f92b7b9e3a9d745f7084815 Mon Sep 17 00:00:00 2001
-From: Remi Collet <remi@remirepo.net>
-Date: Thu, 5 Aug 2021 16:49:48 +0200
-Subject: [PATCH] implement openssl_256 and openssl_512 for phar singatures
-
----
- ext/openssl/openssl.c                         |   1 +
- ext/phar/phar.1.in                            |  10 +++-
- ext/phar/phar.c                               |   8 +++-
- ext/phar/phar/pharcommand.inc                 |  14 +++++-
- ext/phar/phar_internal.h                      |   2 +
- ext/phar/phar_object.c                        |  24 ++++++++--
- ext/phar/tests/files/openssl256.phar          | Bin 0 -> 7129 bytes
- ext/phar/tests/files/openssl256.phar.pubkey   |   6 +++
- ext/phar/tests/files/openssl512.phar          | Bin 0 -> 7129 bytes
- ext/phar/tests/files/openssl512.phar.pubkey   |   6 +++
- .../phar_get_supported_signatures_002a.phpt   |   6 ++-
- .../tests/tar/phar_setsignaturealgo2.phpt     |  16 +++++++
- ext/phar/tests/test_signaturealgos.phpt       |   8 ++++
- ext/phar/util.c                               |  45 ++++++++++++++----
- 14 files changed, 128 insertions(+), 18 deletions(-)
- create mode 100644 ext/phar/tests/files/openssl256.phar
- create mode 100644 ext/phar/tests/files/openssl256.phar.pubkey
- create mode 100644 ext/phar/tests/files/openssl512.phar
- create mode 100644 ext/phar/tests/files/openssl512.phar.pubkey
-
-diff --git a/ext/phar/phar.1.in b/ext/phar/phar.1.in
-index 77912b241dfd5..323e77b0e2a3b 100644
---- a/ext/phar/phar.1.in
-+++ b/ext/phar/phar.1.in
-@@ -475,7 +475,15 @@ SHA512
- .TP
- .PD
- .B openssl
--OpenSSL
-+OpenSSL using SHA-1
-+.TP
-+.PD
-+.B openssl_sha256
-+OpenSSL using SHA-256
-+.TP
-+.PD
-+.B openssl_sha512
-+OpenSSL using SHA-512
- 
- .SH SEE ALSO
- For a more or less complete description of PHAR look here:
-diff --git a/ext/phar/phar.c b/ext/phar/phar.c
-index 77f21cef9da53..bc08e4edde05d 100644
---- a/ext/phar/phar.c
-+++ b/ext/phar/phar.c
-@@ -869,6 +869,8 @@ static int phar_parse_pharfile(php_stream *fp, char *fname, size_t fname_len, ch
- 		PHAR_GET_32(sig_ptr, sig_flags);
- 
- 		switch(sig_flags) {
-+			case PHAR_SIG_OPENSSL_SHA512:
-+			case PHAR_SIG_OPENSSL_SHA256:
- 			case PHAR_SIG_OPENSSL: {
- 				uint32_t signature_len;
- 				char *sig;
-@@ -903,7 +905,7 @@ static int phar_parse_pharfile(php_stream *fp, char *fname, size_t fname_len, ch
- 					return FAILURE;
- 				}
- 
--				if (FAILURE == phar_verify_signature(fp, end_of_phar, PHAR_SIG_OPENSSL, sig, signature_len, fname, &signature, &sig_len, error)) {
-+				if (FAILURE == phar_verify_signature(fp, end_of_phar, sig_flags, sig, signature_len, fname, &signature, &sig_len, error)) {
- 					efree(savebuf);
- 					efree(sig);
- 					php_stream_close(fp);
-@@ -3162,7 +3164,9 @@ int phar_flush(phar_archive_data *phar, char *user_stub, zend_long len, int conv
- 
- 				php_stream_write(newfile, digest, digest_len);
- 				efree(digest);
--				if (phar->sig_flags == PHAR_SIG_OPENSSL) {
-+				if (phar->sig_flags == PHAR_SIG_OPENSSL ||
-+					phar->sig_flags == PHAR_SIG_OPENSSL_SHA256 ||
-+					phar->sig_flags == PHAR_SIG_OPENSSL_SHA512) {
- 					phar_set_32(sig_buf, digest_len);
- 					php_stream_write(newfile, sig_buf, 4);
- 				}
-diff --git a/ext/phar/phar/pharcommand.inc b/ext/phar/phar/pharcommand.inc
-index 5f698b4bec26b..1b1eeca59c560 100644
---- a/ext/phar/phar/pharcommand.inc
-+++ b/ext/phar/phar/pharcommand.inc
-@@ -92,7 +92,7 @@ class PharCommand extends CLICommand
-                 'typ' => 'select',
-                 'val' => NULL,
-                 'inf' => '<method> Selects the hash algorithm.',
--                'select' => array('md5' => 'MD5','sha1' => 'SHA1', 'sha256' => 'SHA256', 'sha512' => 'SHA512', 'openssl' => 'OPENSSL')
-+                'select' => ['md5' => 'MD5','sha1' => 'SHA1', 'sha256' => 'SHA256', 'sha512' => 'SHA512', 'openssl' => 'OPENSSL', 'openssl_sha256' => 'OPENSSL_SHA256', 'openssl_sha512' => 'OPENSSL_SHA512']
-             ),
-             'i' => array(
-                 'typ' => 'regex',
-@@ -156,6 +156,8 @@ class PharCommand extends CLICommand
-         $hash_avail = Phar::getSupportedSignatures();
-         $hash_optional = array('SHA-256' => 'SHA256',
-                                'SHA-512' => 'SHA512',
-+                               'OpenSSL_sha256' => 'OpenSSL_SHA256',
-+                               'OpenSSL_sha512' => 'OpenSSL_SHA512',
-                                'OpenSSL' => 'OpenSSL');
-         if (!in_array('OpenSSL', $hash_avail)) {
-             unset($phar_args['y']);
-@@ -429,6 +431,16 @@ class PharCommand extends CLICommand
-                     self::error("Cannot use OpenSSL signing without key.\n");
-                 }
-                 return Phar::OPENSSL;
-+            case 'openssl_sha256':
-+                if (!$privkey) {
-+                    self::error("Cannot use OpenSSL signing without key.\n");
-+                }
-+                return Phar::OPENSSL_SHA256;
-+            case 'openssl_sha512':
-+                if (!$privkey) {
-+                    self::error("Cannot use OpenSSL signing without key.\n");
-+                }
-+                return Phar::OPENSSL_SHA512;
-         }
-     }
-     // }}}
-diff --git a/ext/phar/phar_internal.h b/ext/phar/phar_internal.h
-index a9f81e2ab994a..30b408a8c4462 100644
---- a/ext/phar/phar_internal.h
-+++ b/ext/phar/phar_internal.h
-@@ -88,6 +88,8 @@
- #define PHAR_SIG_SHA256           0x0003
- #define PHAR_SIG_SHA512           0x0004
- #define PHAR_SIG_OPENSSL          0x0010
-+#define PHAR_SIG_OPENSSL_SHA256   0x0011
-+#define PHAR_SIG_OPENSSL_SHA512   0x0012
- 
- /* flags byte for each file adheres to these bitmasks.
-    All unused values are reserved */
-diff --git a/ext/phar/phar_object.c b/ext/phar/phar_object.c
-index 9c1e5f2fa1eef..c05970e657f18 100644
---- a/ext/phar/phar_object.c
-+++ b/ext/phar/phar_object.c
-@@ -1246,9 +1246,13 @@ PHP_METHOD(Phar, getSupportedSignatures)
- 	add_next_index_stringl(return_value, "SHA-512", 7);
- #ifdef PHAR_HAVE_OPENSSL
- 	add_next_index_stringl(return_value, "OpenSSL", 7);
-+	add_next_index_stringl(return_value, "OpenSSL_SHA256", 14);
-+	add_next_index_stringl(return_value, "OpenSSL_SHA512", 14);
- #else
- 	if (zend_hash_str_exists(&module_registry, "openssl", sizeof("openssl")-1)) {
- 		add_next_index_stringl(return_value, "OpenSSL", 7);
-+		add_next_index_stringl(return_value, "OpenSSL_SHA256", 14);
-+		add_next_index_stringl(return_value, "OpenSSL_SHA512", 14);
- 	}
- #endif
- }
-@@ -3028,6 +3032,8 @@ PHP_METHOD(Phar, setSignatureAlgorithm)
- 		case PHAR_SIG_MD5:
- 		case PHAR_SIG_SHA1:
- 		case PHAR_SIG_OPENSSL:
-+		case PHAR_SIG_OPENSSL_SHA256:
-+		case PHAR_SIG_OPENSSL_SHA512:
- 			if (phar_obj->archive->is_persistent && FAILURE == phar_copy_on_write(&(phar_obj->archive))) {
- 				zend_throw_exception_ex(phar_ce_PharException, 0, "phar \"%s\" is persistent, unable to copy on write", phar_obj->archive->fname);
- 				RETURN_THROWS();
-@@ -3066,19 +3072,25 @@ PHP_METHOD(Phar, getSignature)
- 		add_assoc_stringl(return_value, "hash", phar_obj->archive->signature, phar_obj->archive->sig_len);
- 		switch(phar_obj->archive->sig_flags) {
- 			case PHAR_SIG_MD5:
--				add_assoc_stringl(return_value, "hash_type", "MD5", 3);
-+				add_assoc_string(return_value, "hash_type", "MD5");
- 				break;
- 			case PHAR_SIG_SHA1:
--				add_assoc_stringl(return_value, "hash_type", "SHA-1", 5);
-+				add_assoc_string(return_value, "hash_type", "SHA-1");
- 				break;
- 			case PHAR_SIG_SHA256:
--				add_assoc_stringl(return_value, "hash_type", "SHA-256", 7);
-+				add_assoc_string(return_value, "hash_type", "SHA-256");
- 				break;
- 			case PHAR_SIG_SHA512:
--				add_assoc_stringl(return_value, "hash_type", "SHA-512", 7);
-+				add_assoc_string(return_value, "hash_type", "SHA-512");
- 				break;
- 			case PHAR_SIG_OPENSSL:
--				add_assoc_stringl(return_value, "hash_type", "OpenSSL", 7);
-+				add_assoc_string(return_value, "hash_type", "OpenSSL");
-+				break;
-+			case PHAR_SIG_OPENSSL_SHA256:
-+				add_assoc_string(return_value, "hash_type", "OpenSSL_SHA256");
-+				break;
-+			case PHAR_SIG_OPENSSL_SHA512:
-+				add_assoc_string(return_value, "hash_type", "OpenSSL_SHA512");
- 				break;
- 			default:
- 				unknown = strpprintf(0, "Unknown (%u)", phar_obj->archive->sig_flags);
-@@ -5103,6 +5115,8 @@ void phar_object_init(void) /* {{{ */
- 	REGISTER_PHAR_CLASS_CONST_LONG(phar_ce_archive, "PHPS", PHAR_MIME_PHPS)
- 	REGISTER_PHAR_CLASS_CONST_LONG(phar_ce_archive, "MD5", PHAR_SIG_MD5)
- 	REGISTER_PHAR_CLASS_CONST_LONG(phar_ce_archive, "OPENSSL", PHAR_SIG_OPENSSL)
-+	REGISTER_PHAR_CLASS_CONST_LONG(phar_ce_archive, "OPENSSL_SHA256", PHAR_SIG_OPENSSL_SHA256)
-+	REGISTER_PHAR_CLASS_CONST_LONG(phar_ce_archive, "OPENSSL_SHA512", PHAR_SIG_OPENSSL_SHA512)
- 	REGISTER_PHAR_CLASS_CONST_LONG(phar_ce_archive, "SHA1", PHAR_SIG_SHA1)
- 	REGISTER_PHAR_CLASS_CONST_LONG(phar_ce_archive, "SHA256", PHAR_SIG_SHA256)
- 	REGISTER_PHAR_CLASS_CONST_LONG(phar_ce_archive, "SHA512", PHAR_SIG_SHA512)
-diff --git a/ext/phar/tests/phar_get_supported_signatures_002a.phpt b/ext/phar/tests/phar_get_supported_signatures_002a.phpt
-index 06d811f2c35c2..639143b3d2c90 100644
---- a/ext/phar/tests/phar_get_supported_signatures_002a.phpt
-+++ b/ext/phar/tests/phar_get_supported_signatures_002a.phpt
-@@ -14,7 +14,7 @@ phar.readonly=0
- var_dump(Phar::getSupportedSignatures());
- ?>
- --EXPECT--
--array(5) {
-+array(7) {
-   [0]=>
-   string(3) "MD5"
-   [1]=>
-@@ -25,4 +25,8 @@ array(5) {
-   string(7) "SHA-512"
-   [4]=>
-   string(7) "OpenSSL"
-+  [5]=>
-+  string(14) "OpenSSL_SHA256"
-+  [6]=>
-+  string(14) "OpenSSL_SHA512"
- }
-diff --git a/ext/phar/tests/tar/phar_setsignaturealgo2.phpt b/ext/phar/tests/tar/phar_setsignaturealgo2.phpt
-index cc10a241d739b..c2eb5d77a5bf0 100644
---- a/ext/phar/tests/tar/phar_setsignaturealgo2.phpt
-+++ b/ext/phar/tests/tar/phar_setsignaturealgo2.phpt
-@@ -38,6 +38,10 @@ $pkey = '';
- openssl_pkey_export($private, $pkey, NULL, $config_arg);
- $p->setSignatureAlgorithm(Phar::OPENSSL, $pkey);
- var_dump($p->getSignature());
-+$p->setSignatureAlgorithm(Phar::OPENSSL_SHA512, $pkey);
-+var_dump($p->getSignature());
-+$p->setSignatureAlgorithm(Phar::OPENSSL_SHA256, $pkey);
-+var_dump($p->getSignature());
- } catch (Exception $e) {
- echo $e->getMessage();
- }
-@@ -83,3 +87,15 @@ array(2) {
-   ["hash_type"]=>
-   string(7) "OpenSSL"
- }
-+array(2) {
-+  ["hash"]=>
-+  string(%d) "%s"
-+  ["hash_type"]=>
-+  string(14) "OpenSSL_SHA512"
-+}
-+array(2) {
-+  ["hash"]=>
-+  string(%d) "%s"
-+  ["hash_type"]=>
-+  string(14) "OpenSSL_SHA256"
-+}
-diff --git a/ext/phar/util.c b/ext/phar/util.c
-index 8d2db03b69601..515830bf2c70a 100644
---- a/ext/phar/util.c
-+++ b/ext/phar/util.c
-@@ -34,7 +34,7 @@
- #include <openssl/ssl.h>
- #include <openssl/pkcs12.h>
- #else
--static int phar_call_openssl_signverify(int is_sign, php_stream *fp, zend_off_t end, char *key, size_t key_len, char **signature, size_t *signature_len);
-+static int phar_call_openssl_signverify(int is_sign, php_stream *fp, zend_off_t end, char *key, size_t key_len, char **signature, size_t *signature_len, php_uint32 sig_type);
- #endif
- 
- /* for links to relative location, prepend cwd of the entry */
-@@ -1381,11 +1381,11 @@ static int phar_hex_str(const char *digest, size_t digest_len, char **signature)
- /* }}} */
- 
- #ifndef PHAR_HAVE_OPENSSL
--static int phar_call_openssl_signverify(int is_sign, php_stream *fp, zend_off_t end, char *key, size_t key_len, char **signature, size_t *signature_len) /* {{{ */
-+static int phar_call_openssl_signverify(int is_sign, php_stream *fp, zend_off_t end, char *key, size_t key_len, char **signature, size_t *signature_len, php_uint32 sig_type) /* {{{ */
- {
- 	zend_fcall_info fci;
- 	zend_fcall_info_cache fcc;
--	zval retval, zp[3], openssl;
-+	zval retval, zp[4], openssl;
- 	zend_string *str;
- 
- 	ZVAL_STRINGL(&openssl, is_sign ? "openssl_sign" : "openssl_verify", is_sign ? sizeof("openssl_sign")-1 : sizeof("openssl_verify")-1);
-@@ -1402,6 +1402,14 @@ static int phar_call_openssl_signverify(int is_sign, php_stream *fp, zend_off_t
- 	} else {
- 		ZVAL_EMPTY_STRING(&zp[0]);
- 	}
-+	if (sig_type == PHAR_SIG_OPENSSL_SHA512) {
-+		ZVAL_LONG(&zp[3], 9); /* value from openssl.c #define OPENSSL_ALGO_SHA512 9 */
-+	} else if (sig_type == PHAR_SIG_OPENSSL_SHA256) {
-+		ZVAL_LONG(&zp[3], 7); /* value from openssl.c #define OPENSSL_ALGO_SHA256 7 */
-+	} else {
-+		/* don't rely on default value which may change in the future */
-+		ZVAL_LONG(&zp[3], 1); /* value from openssl.c #define OPENSSL_ALGO_SHA1   1 */
-+	}
- 
- 	if ((size_t)end != Z_STRLEN(zp[0])) {
- 		zval_ptr_dtor_str(&zp[0]);
-@@ -1419,7 +1427,7 @@ static int phar_call_openssl_signverify(int is_sign, php_stream *fp, zend_off_t
- 		return FAILURE;
- 	}
- 
--	fci.param_count = 3;
-+	fci.param_count = 4;
- 	fci.params = zp;
- 	Z_ADDREF(zp[0]);
- 	if (is_sign) {
-@@ -1482,12 +1490,22 @@ int phar_verify_signature(php_stream *fp, size_t end_of_phar, uint32_t sig_type,
- 	php_stream_rewind(fp);
- 
- 	switch (sig_type) {
-+		case PHAR_SIG_OPENSSL_SHA512:
-+		case PHAR_SIG_OPENSSL_SHA256:
- 		case PHAR_SIG_OPENSSL: {
- #ifdef PHAR_HAVE_OPENSSL
- 			BIO *in;
- 			EVP_PKEY *key;
--			EVP_MD *mdtype = (EVP_MD *) EVP_sha1();
-+			const EVP_MD *mdtype;
- 			EVP_MD_CTX *md_ctx;
-+
-+			if (sig_type == PHAR_SIG_OPENSSL_SHA512) {
-+				mdtype = EVP_sha512();
-+			} else if (sig_type == PHAR_SIG_OPENSSL_SHA256) {
-+				mdtype = EVP_sha256();
-+			} else {
-+				mdtype = EVP_sha1();
-+			}
- #else
- 			size_t tempsig;
- #endif
-@@ -1521,7 +1539,7 @@ int phar_verify_signature(php_stream *fp, size_t end_of_phar, uint32_t sig_type,
- #ifndef PHAR_HAVE_OPENSSL
- 			tempsig = sig_len;
- 
--			if (FAILURE == phar_call_openssl_signverify(0, fp, end_of_phar, pubkey ? ZSTR_VAL(pubkey) : NULL, pubkey ? ZSTR_LEN(pubkey) : 0, &sig, &tempsig)) {
-+			if (FAILURE == phar_call_openssl_signverify(0, fp, end_of_phar, pubkey ? ZSTR_VAL(pubkey) : NULL, pubkey ? ZSTR_LEN(pubkey) : 0, &sig, &tempsig, sig_type)) {
- 				if (pubkey) {
- 					zend_string_release_ex(pubkey, 0);
- 				}
-@@ -1815,6 +1833,8 @@ int phar_create_signature(phar_archive_data *phar, php_stream *fp, char **signat
- 			*signature_length = 32;
- 			break;
- 		}
-+		case PHAR_SIG_OPENSSL_SHA512:
-+		case PHAR_SIG_OPENSSL_SHA256:
- 		case PHAR_SIG_OPENSSL: {
- 			unsigned char *sigbuf;
- #ifdef PHAR_HAVE_OPENSSL
-@@ -1822,6 +1842,15 @@ int phar_create_signature(phar_archive_data *phar, php_stream *fp, char **signat
- 			BIO *in;
- 			EVP_PKEY *key;
- 			EVP_MD_CTX *md_ctx;
-+			const EVP_MD *mdtype;
-+
-+			if (phar->sig_flags == PHAR_SIG_OPENSSL_SHA512) {
-+				mdtype = EVP_sha512();
-+			} else if (phar->sig_flags == PHAR_SIG_OPENSSL_SHA256) {
-+				mdtype = EVP_sha256();
-+			} else {
-+				mdtype = EVP_sha1();
-+			}
- 
- 			in = BIO_new_mem_buf(PHAR_G(openssl_privatekey), PHAR_G(openssl_privatekey_len));
- 
-@@ -1847,7 +1876,7 @@ int phar_create_signature(phar_archive_data *phar, php_stream *fp, char **signat
- 			siglen = EVP_PKEY_size(key);
- 			sigbuf = emalloc(siglen + 1);
- 
--			if (!EVP_SignInit(md_ctx, EVP_sha1())) {
-+			if (!EVP_SignInit(md_ctx, mdtype)) {
- 				EVP_PKEY_free(key);
- 				efree(sigbuf);
- 				if (error) {
-@@ -1885,7 +1914,7 @@ int phar_create_signature(phar_archive_data *phar, php_stream *fp, char **signat
- 			siglen = 0;
- 			php_stream_seek(fp, 0, SEEK_END);
- 
--			if (FAILURE == phar_call_openssl_signverify(1, fp, php_stream_tell(fp), PHAR_G(openssl_privatekey), PHAR_G(openssl_privatekey_len), (char **)&sigbuf, &siglen)) {
-+			if (FAILURE == phar_call_openssl_signverify(1, fp, php_stream_tell(fp), PHAR_G(openssl_privatekey), PHAR_G(openssl_privatekey_len), (char **)&sigbuf, &siglen, phar->sig_flags)) {
- 				if (error) {
- 					spprintf(error, 0, "unable to write phar \"%s\" with requested openssl signature", phar->fname);
- 				}

SOURCES/php-8.0.10-snmp-sha.patch

@@ -1,143 +0,0 @@
-Backported for 8.0 from
-
-
-From 718e91343fddb8817a004f96f111c424843bf746 Mon Sep 17 00:00:00 2001
-From: Remi Collet <remi@php.net>
-Date: Wed, 11 Aug 2021 13:02:18 +0200
-Subject: [PATCH] add SHA256 and SHA512 for security protocol
-
----
- ext/snmp/config.m4                            | 18 +++++++++-
- ext/snmp/snmp.c                               | 33 ++++++++++++++++++-
- .../tests/snmp-object-setSecurity_error.phpt  |  2 +-
- ext/snmp/tests/snmp3-error.phpt               |  2 +-
- 4 files changed, 51 insertions(+), 4 deletions(-)
-
-diff --git a/ext/snmp/config.m4 b/ext/snmp/config.m4
-index 1475ddfe2b7f0..f285a572de9cb 100644
---- a/ext/snmp/config.m4
-+++ b/ext/snmp/config.m4
-@@ -30,7 +30,7 @@ if test "$PHP_SNMP" != "no"; then
-         AC_MSG_ERROR([Could not find the required paths. Please check your net-snmp installation.])
-       fi
-     else
--      AC_MSG_ERROR([Net-SNMP version 5.3 or greater reqired (detected $snmp_full_version).])
-+      AC_MSG_ERROR([Net-SNMP version 5.3 or greater required (detected $snmp_full_version).])
-     fi
-   else
-     AC_MSG_ERROR([Could not find net-snmp-config binary. Please check your net-snmp installation.])
-@@ -54,6 +54,22 @@ if test "$PHP_SNMP" != "no"; then
-     $SNMP_SHARED_LIBADD
-   ])
- 
-+  dnl Check whether usmHMAC192SHA256AuthProtocol exists.
-+  PHP_CHECK_LIBRARY($SNMP_LIBNAME, usmHMAC192SHA256AuthProtocol,
-+  [
-+    AC_DEFINE(HAVE_SNMP_SHA256, 1, [ ])
-+  ], [], [
-+    $SNMP_SHARED_LIBADD
-+  ])
-+
-+  dnl Check whether usmHMAC384SHA512AuthProtocol exists.
-+  PHP_CHECK_LIBRARY($SNMP_LIBNAME, usmHMAC384SHA512AuthProtocol,
-+  [
-+    AC_DEFINE(HAVE_SNMP_SHA512, 1, [ ])
-+  ], [], [
-+    $SNMP_SHARED_LIBADD
-+  ])
-+
-   PHP_NEW_EXTENSION(snmp, snmp.c, $ext_shared)
-   PHP_SUBST(SNMP_SHARED_LIBADD)
- fi
-diff --git a/ext/snmp/snmp.c b/ext/snmp/snmp.c
-index 69d6549405b17..f0917501751f5 100644
---- a/ext/snmp/snmp.c
-+++ b/ext/snmp/snmp.c
-@@ -29,6 +29,7 @@
- #include "php_snmp.h"
- 
- #include "zend_exceptions.h"
-+#include "zend_smart_string.h"
- #include "ext/spl/spl_exceptions.h"
- #include "snmp_arginfo.h"
- 
-@@ -938,16 +939,48 @@ static int netsnmp_session_set_auth_protocol(struct snmp_session *s, char *prot)
- 	if (!strcasecmp(prot, "MD5")) {
- 		s->securityAuthProto = usmHMACMD5AuthProtocol;
- 		s->securityAuthProtoLen = USM_AUTH_PROTO_MD5_LEN;
--	} else
-+		return 0;
-+	}
- #endif
-+
- 	if (!strcasecmp(prot, "SHA")) {
- 		s->securityAuthProto = usmHMACSHA1AuthProtocol;
- 		s->securityAuthProtoLen = USM_AUTH_PROTO_SHA_LEN;
--	} else {
--		zend_value_error("Authentication protocol must be either \"MD5\" or \"SHA\"");
--		return (-1);
-+		return 0;
- 	}
--	return (0);
-+
-+#ifdef HAVE_SNMP_SHA256
-+	if (!strcasecmp(prot, "SHA256")) {
-+		s->securityAuthProto = usmHMAC192SHA256AuthProtocol;
-+		s->securityAuthProtoLen = sizeof(usmHMAC192SHA256AuthProtocol) / sizeof(oid);
-+		return 0;
-+	}
-+#endif
-+
-+#ifdef HAVE_SNMP_SHA512
-+	if (!strcasecmp(prot, "SHA512")) {
-+		s->securityAuthProto = usmHMAC384SHA512AuthProtocol;
-+		s->securityAuthProtoLen = sizeof(usmHMAC384SHA512AuthProtocol) / sizeof(oid);
-+		return 0;
-+	}
-+#endif
-+
-+	smart_string err = {0};
-+
-+	smart_string_appends(&err, "Authentication protocol must be \"SHA\"");
-+#ifdef HAVE_SNMP_SHA256
-+	smart_string_appends(&err, " or \"SHA256\"");
-+#endif
-+#ifdef HAVE_SNMP_SHA512
-+	smart_string_appends(&err, " or \"SHA512\"");
-+#endif
-+#ifndef DISABLE_MD5
-+	smart_string_appends(&err, " or \"MD5\"");
-+#endif
-+	smart_string_0(&err);
-+	zend_value_error("%s", err.c);
-+	smart_string_free(&err);
-+	return -1;
- }
- /* }}} */
- 
-diff --git a/ext/snmp/tests/snmp-object-setSecurity_error.phpt b/ext/snmp/tests/snmp-object-setSecurity_error.phpt
-index f8de846492a75..cf4f928837773 100644
---- a/ext/snmp/tests/snmp-object-setSecurity_error.phpt
-+++ b/ext/snmp/tests/snmp-object-setSecurity_error.phpt
-@@ -59,7 +59,7 @@ var_dump($session->close());
- --EXPECTF--
- Security level must be one of "noAuthNoPriv", "authNoPriv", or "authPriv"
- Security level must be one of "noAuthNoPriv", "authNoPriv", or "authPriv"
--Authentication protocol must be either "MD5" or "SHA"
-+Authentication protocol must be %s
- 
- Warning: SNMP::setSecurity(): Error generating a key for authentication pass phrase '': Generic error (The supplied password length is too short.) in %s on line %d
- bool(false)
-diff --git a/ext/snmp/tests/snmp3-error.phpt b/ext/snmp/tests/snmp3-error.phpt
-index 849e363b45058..389800dad6b28 100644
---- a/ext/snmp/tests/snmp3-error.phpt
-+++ b/ext/snmp/tests/snmp3-error.phpt
-@@ -58,7 +58,7 @@ try {
- Checking error handling
- Security level must be one of "noAuthNoPriv", "authNoPriv", or "authPriv"
- Security level must be one of "noAuthNoPriv", "authNoPriv", or "authPriv"
--Authentication protocol must be either "MD5" or "SHA"
-+Authentication protocol must be %s
- 
- Warning: snmp3_get(): Error generating a key for authentication pass phrase '': Generic error (The supplied password length is too short.) in %s on line %d
- bool(false)

SOURCES/php-8.0.13-crypt.patch

@@ -1,45 +0,0 @@
-From fc4e31467c352032ee709ac55d3c67bc22abcd8d Mon Sep 17 00:00:00 2001
-From: Remi Collet <remi@remirepo.net>
-Date: Fri, 15 Oct 2021 17:11:12 +0200
-Subject: [PATCH] add --with-external-libcrypt build option display an error
- message if some algo not available in external libcrypt
-
----
- ext/standard/config.m4 | 21 ++++++++++++++++-----
- 1 file changed, 16 insertions(+), 5 deletions(-)
-
-diff --git a/ext/standard/config.m4 b/ext/standard/config.m4
-index 58b9c5e658a4..3ec18be4d7df 100644
---- a/ext/standard/config.m4
-+++ b/ext/standard/config.m4
-@@ -267,14 +267,25 @@ int main() {
- ])])
- 
- 
-+PHP_ARG_WITH([external-libcrypt],
-+  [for external libcrypt or libxcrypt],
-+  [AS_HELP_STRING([--with-external-libcrypt],
-+    [Use external libcrypt or libxcrypt])],
-+  [no],
-+  [no])
-+
- dnl
- dnl If one of them is missing, use our own implementation, portable code is then possible
- dnl
--dnl TODO This is currently always enabled
--if test "$ac_cv_crypt_blowfish" = "no" || test "$ac_cv_crypt_des" = "no" || test "$ac_cv_crypt_ext_des" = "no" || test "$ac_cv_crypt_md5" = "no" || test "$ac_cv_crypt_sha512" = "no" || test "$ac_cv_crypt_sha256" = "no" || test "$ac_cv_func_crypt_r" != "yes" || true; then
--  AC_DEFINE_UNQUOTED(PHP_USE_PHP_CRYPT_R, 1, [Whether PHP has to use its own crypt_r for blowfish, des, ext des and md5])
--
--  PHP_ADD_SOURCES(PHP_EXT_DIR(standard), crypt_freesec.c crypt_blowfish.c crypt_sha512.c crypt_sha256.c php_crypt_r.c)
-+dnl This is currently enabled by default
-+if test "$ac_cv_crypt_blowfish" = "no" || test "$ac_cv_crypt_des" = "no" || test "$ac_cv_crypt_ext_des" = "no" || test "$ac_cv_crypt_md5" = "no" || test "$ac_cv_crypt_sha512" = "no" || test "$ac_cv_crypt_sha256" = "no" || test "$ac_cv_func_crypt_r" != "yes" || test "$PHP_EXTERNAL_LIBCRYPT" = "no"; then
-+  if test "$PHP_EXTERNAL_LIBCRYPT" = "no"; then
-+    AC_DEFINE_UNQUOTED(PHP_USE_PHP_CRYPT_R, 1, [Whether PHP has to use its own crypt_r for blowfish, des, ext des and md5])
-+
-+    PHP_ADD_SOURCES(PHP_EXT_DIR(standard), crypt_freesec.c crypt_blowfish.c crypt_sha512.c crypt_sha256.c php_crypt_r.c)
-+   else
-+    AC_MSG_ERROR([Cannot use external libcrypt as some algo are missing])
-+   fi
- else
-   AC_DEFINE_UNQUOTED(PHP_USE_PHP_CRYPT_R, 0, [Whether PHP has to use its own crypt_r for blowfish, des and ext des])
- fi

SOURCES/php-8.0.19-parser.patch

@@ -1,16 +0,0 @@
-diff -up ./build/gen_stub.php.syslib ./build/gen_stub.php
---- ./build/gen_stub.php.syslib	2020-06-25 08:11:51.782046813 +0200
-+++ ./build/gen_stub.php	2020-06-25 08:13:11.188860368 +0200
-@@ -1075,6 +1075,12 @@ function initPhpParser() {
-     }
- 
-     $isInitialized = true;
-+
-+    if (file_exists('/usr/share/php/PhpParser4/autoload.php')) {
-+        require_once '/usr/share/php/PhpParser4/autoload.php';
-+        return;
-+    }
-+
-     $version = "4.13.0";
-     $phpParserDir = __DIR__ . "/PHP-Parser-$version";
-     if (!is_dir($phpParserDir)) {

SOURCES/php-8.0.27.tar.xz.asc

@@ -1,17 +0,0 @@
------BEGIN PGP SIGNATURE-----
-
-iQJKBAABCAA0FiEELBbHZdvlSgiBMPG8S5tfYAtV87QFAmO0V3EWHGNhcnVzb2dh
-YnJpZWxAcGhwLm5ldAAKCRBLm19gC1XztIS+D/4oSpkmnwIJgZVkb3eGrwdOwTzu
-dDg1cT/eO89AuKmEsVYCDxOGyWIUBunZkZ5sEWbvlNPM4xxxA1EN6DoNMgZal1UN
-hSdx19IbmMBYAquINikasBQEvMhCJMUNqRvvLmGRndbDk8DusrIEyxv65clpt3xx
-r7rzYs+06+i2MCUxI53nRX3Hl6MQ208Wx/SefKu2LrZ+5Sylz/fFpYP1kre21f+4
-Zpig5wR8WS0KyzPO7rPdYq8+SQ88pYrlxSGIbgC1WLDSODWJ2aqSfshinVkOBlMh
-XdbNv9hBidQT+B0YaTLCm0SrFCpTfBcW4+4WBucjQjhwYtfC+3ldMY/tdzPBIYWI
-yLfTcpsRViv1Jn4liwFsGIlFPy9CaE3e/IOQaxgh/SAeGwMVQEAkysmTNWCS7/BW
-uJ/+TeEGoYkLIwbP4AIOk2YXDlr9BwaUHLqITFVgqZLEhXC2elFsPd/9B1MgGwMO
-1ZcjMoULgPnMkoGhKhuCUuxug4yjBxBVROreNhtXvfmTt24GUkR65Aqm6w8S4OPO
-kG3aqhSxTAOHQCbMl4PyOkUBUbVIpByiJSMOz+PAAb7SHMc3suw3MEGZTMoLD1Gh
-JgCjjh0KyMEJtN8nILI85xOQeuv6zG/szwNcZWXrC6+PTndMXOACLyS0dNCevFNz
-DCp3Qv9kRIty3xvUKg==
-=Rb0u
------END PGP SIGNATURE-----

SOURCES/php-8.0.6-deprecated.patch

@@ -1,400 +0,0 @@
-From 4dc8b3c0efaae25b08c8f59b068f17c97c59d0ae Mon Sep 17 00:00:00 2001
-From: Remi Collet <remi@remirepo.net>
-Date: Wed, 5 May 2021 15:41:00 +0200
-Subject: [PATCH] get rid of inet_aton and inet_ntoa use inet_ntop iand
- inet_pton where available standardize buffer size
-
----
- ext/sockets/sockaddr_conv.c |  4 ++++
- ext/sockets/sockets.c       | 48 +++++++++++++++++++++++++------------
- ext/standard/dns.c          | 16 ++++++++++++-
- main/network.c              | 20 ++++++++++++++--
- 4 files changed, 70 insertions(+), 18 deletions(-)
-
-diff --git a/ext/sockets/sockaddr_conv.c b/ext/sockets/sockaddr_conv.c
-index 57996612d2d7e..65c8418fb3a6f 100644
---- a/ext/sockets/sockaddr_conv.c
-+++ b/ext/sockets/sockaddr_conv.c
-@@ -87,7 +87,11 @@ int php_set_inet_addr(struct sockaddr_in *sin, char *string, php_socket *php_soc
- 	struct in_addr tmp;
- 	struct hostent *host_entry;
- 
-+#ifdef HAVE_INET_PTON
-+	if (inet_pton(AF_INET, string, &tmp)) {
-+#else
- 	if (inet_aton(string, &tmp)) {
-+#endif
- 		sin->sin_addr.s_addr = tmp.s_addr;
- 	} else {
- 		if (strlen(string) > MAXFQDNLEN || ! (host_entry = php_network_gethostbyname(string))) {
-diff --git a/ext/sockets/sockets.c b/ext/sockets/sockets.c
-index 16ad3e8013a4c..85c938d1b97b1 100644
---- a/ext/sockets/sockets.c
-+++ b/ext/sockets/sockets.c
-@@ -220,8 +220,10 @@ zend_module_entry sockets_module_entry = {
- ZEND_GET_MODULE(sockets)
- #endif
- 
-+#ifndef HAVE_INET_NTOP
- /* inet_ntop should be used instead of inet_ntoa */
- int inet_ntoa_lock = 0;
-+#endif
- 
- static int php_open_listen_sock(php_socket *sock, int port, int backlog) /* {{{ */
- {
-@@ -1082,10 +1084,12 @@ PHP_FUNCTION(socket_getsockname)
- 	struct sockaddr_in		*sin;
- #if HAVE_IPV6
- 	struct sockaddr_in6		*sin6;
--	char					addr6[INET6_ADDRSTRLEN+1];
-+#endif
-+#ifdef HAVE_INET_NTOP
-+	char					addrbuf[INET6_ADDRSTRLEN];
- #endif
- 	struct sockaddr_un		*s_un;
--	char					*addr_string;
-+	const char				*addr_string;
- 	socklen_t				salen = sizeof(php_sockaddr_storage);
- 
- 	if (zend_parse_parameters(ZEND_NUM_ARGS(), "Oz|z", &arg1, socket_ce, &addr, &port) == FAILURE) {
-@@ -1106,8 +1110,8 @@ PHP_FUNCTION(socket_getsockname)
- #if HAVE_IPV6
- 		case AF_INET6:
- 			sin6 = (struct sockaddr_in6 *) sa;
--			inet_ntop(AF_INET6, &sin6->sin6_addr, addr6, INET6_ADDRSTRLEN);
--			ZEND_TRY_ASSIGN_REF_STRING(addr, addr6);
-+			inet_ntop(AF_INET6, &sin6->sin6_addr,  addrbuf, sizeof(addrbuf));
-+			ZEND_TRY_ASSIGN_REF_STRING(addr, addrbuf);
- 
- 			if (port != NULL) {
- 				ZEND_TRY_ASSIGN_REF_LONG(port, htons(sin6->sin6_port));
-@@ -1117,11 +1121,14 @@ PHP_FUNCTION(socket_getsockname)
- #endif
- 		case AF_INET:
- 			sin = (struct sockaddr_in *) sa;
-+#ifdef HAVE_INET_NTOP
-+			addr_string = inet_ntop(AF_INET, &sin->sin_addr, addrbuf, sizeof(addrbuf));
-+#else
- 			while (inet_ntoa_lock == 1);
- 			inet_ntoa_lock = 1;
- 			addr_string = inet_ntoa(sin->sin_addr);
- 			inet_ntoa_lock = 0;
--
-+#endif
- 			ZEND_TRY_ASSIGN_REF_STRING(addr, addr_string);
- 
- 			if (port != NULL) {
-@@ -1154,10 +1161,12 @@ PHP_FUNCTION(socket_getpeername)
- 	struct sockaddr_in		*sin;
- #if HAVE_IPV6
- 	struct sockaddr_in6		*sin6;
--	char					addr6[INET6_ADDRSTRLEN+1];
-+#endif
-+#ifdef HAVE_INET_NTOP
-+	char					addrbuf[INET6_ADDRSTRLEN];
- #endif
- 	struct sockaddr_un		*s_un;
--	char					*addr_string;
-+	const char				*addr_string;
- 	socklen_t				salen = sizeof(php_sockaddr_storage);
- 
- 	if (zend_parse_parameters(ZEND_NUM_ARGS(), "Oz|z", &arg1, socket_ce, &arg2, &arg3) == FAILURE) {
-@@ -1178,9 +1187,9 @@ PHP_FUNCTION(socket_getpeername)
- #if HAVE_IPV6
- 		case AF_INET6:
- 			sin6 = (struct sockaddr_in6 *) sa;
--			inet_ntop(AF_INET6, &sin6->sin6_addr, addr6, INET6_ADDRSTRLEN);
-+			inet_ntop(AF_INET6, &sin6->sin6_addr, addrbuf, sizeof(addrbuf));
- 
--			ZEND_TRY_ASSIGN_REF_STRING(arg2, addr6);
-+			ZEND_TRY_ASSIGN_REF_STRING(arg2, addrbuf);
- 
- 			if (arg3 != NULL) {
- 				ZEND_TRY_ASSIGN_REF_LONG(arg3, htons(sin6->sin6_port));
-@@ -1191,11 +1200,14 @@ PHP_FUNCTION(socket_getpeername)
- #endif
- 		case AF_INET:
- 			sin = (struct sockaddr_in *) sa;
-+#ifdef HAVE_INET_NTOP
-+			addr_string = inet_ntop(AF_INET, &sin->sin_addr, addrbuf, sizeof(addrbuf));
-+#else
- 			while (inet_ntoa_lock == 1);
- 			inet_ntoa_lock = 1;
- 			addr_string = inet_ntoa(sin->sin_addr);
- 			inet_ntoa_lock = 0;
--
-+#endif
- 			ZEND_TRY_ASSIGN_REF_STRING(arg2, addr_string);
- 
- 			if (arg3 != NULL) {
-@@ -1527,12 +1539,14 @@ PHP_FUNCTION(socket_recvfrom)
- 	struct sockaddr_in	sin;
- #if HAVE_IPV6
- 	struct sockaddr_in6	sin6;
--	char				addr6[INET6_ADDRSTRLEN];
-+#endif
-+#ifdef HAVE_INET_NTOP
-+	char				addrbuf[INET6_ADDRSTRLEN];
- #endif
- 	socklen_t			slen;
- 	int					retval;
- 	zend_long				arg3, arg4;
--	char				*address;
-+	const char			*address;
- 	zend_string			*recv_buf;
- 
- 	if (zend_parse_parameters(ZEND_NUM_ARGS(), "Ozllz|z", &arg1, socket_ce, &arg2, &arg3, &arg4, &arg5, &arg6) == FAILURE) {
-@@ -1590,7 +1604,11 @@ PHP_FUNCTION(socket_recvfrom)
- 			ZSTR_LEN(recv_buf) = retval;
- 			ZSTR_VAL(recv_buf)[ZSTR_LEN(recv_buf)] = '\0';
- 
-+#ifdef HAVE_INET_NTOP
-+			address = inet_ntop(AF_INET, &sin.sin_addr, addrbuf, sizeof(addrbuf));
-+#else
- 			address = inet_ntoa(sin.sin_addr);
-+#endif
- 
- 			ZEND_TRY_ASSIGN_REF_NEW_STR(arg2, recv_buf);
- 			ZEND_TRY_ASSIGN_REF_STRING(arg5, address ? address : "0.0.0.0");
-@@ -1617,11 +1635,11 @@ PHP_FUNCTION(socket_recvfrom)
- 			ZSTR_LEN(recv_buf) = retval;
- 			ZSTR_VAL(recv_buf)[ZSTR_LEN(recv_buf)] = '\0';
- 
--			memset(addr6, 0, INET6_ADDRSTRLEN);
--			inet_ntop(AF_INET6, &sin6.sin6_addr, addr6, INET6_ADDRSTRLEN);
-+			memset(addrbuf, 0, INET6_ADDRSTRLEN);
-+			inet_ntop(AF_INET6, &sin6.sin6_addr,  addrbuf, sizeof(addrbuf));
- 
- 			ZEND_TRY_ASSIGN_REF_NEW_STR(arg2, recv_buf);
--			ZEND_TRY_ASSIGN_REF_STRING(arg5, addr6[0] ? addr6 : "::");
-+			ZEND_TRY_ASSIGN_REF_STRING(arg5, addrbuf[0] ? addrbuf : "::");
- 			ZEND_TRY_ASSIGN_REF_LONG(arg6, ntohs(sin6.sin6_port));
- 			break;
- #endif
-diff --git a/ext/standard/dns.c b/ext/standard/dns.c
-index 41b98424edb60..6efdbbe894b46 100644
---- a/ext/standard/dns.c
-+++ b/ext/standard/dns.c
-@@ -228,6 +228,9 @@ PHP_FUNCTION(gethostbynamel)
- 	struct hostent *hp;
- 	struct in_addr in;
- 	int i;
-+#ifdef HAVE_INET_NTOP
-+	char addr4[INET_ADDRSTRLEN];
-+#endif
- 
- 	ZEND_PARSE_PARAMETERS_START(1, 1)
- 		Z_PARAM_PATH(hostname, hostname_len)
-@@ -255,7 +258,11 @@ PHP_FUNCTION(gethostbynamel)
- 		}
- 
- 		in = *h_addr_entry;
-+#ifdef HAVE_INET_NTOP
-+		add_next_index_string(return_value, inet_ntop(AF_INET, &in, addr4, INET_ADDRSTRLEN));
-+#else
- 		add_next_index_string(return_value, inet_ntoa(in));
-+#endif
- 	}
- }
- /* }}} */
-@@ -266,7 +273,10 @@ static zend_string *php_gethostbyname(char *name)
- 	struct hostent *hp;
- 	struct in_addr *h_addr_0; /* Don't call this h_addr, it's a macro! */
- 	struct in_addr in;
--	char *address;
-+#ifdef HAVE_INET_NTOP
-+	char addr4[INET_ADDRSTRLEN];
-+#endif
-+	const char *address;
- 
- 	hp = php_network_gethostbyname(name);
- 	if (!hp) {
-@@ -281,7 +291,11 @@ static zend_string *php_gethostbyname(char *name)
- 
- 	memcpy(&in.s_addr, h_addr_0, sizeof(in.s_addr));
- 
-+#ifdef HAVE_INET_NTOP
-+	address = inet_ntop(AF_INET, &in, addr4, INET_ADDRSTRLEN);
-+#else
- 	address = inet_ntoa(in);
-+#endif
- 	return zend_string_init(address, strlen(address), 0);
- }
- /* }}} */
-diff --git a/main/network.c b/main/network.c
-index 2c504952b2dd1..7f2f714ec42df 100644
---- a/main/network.c
-+++ b/main/network.c
-@@ -236,8 +236,12 @@ PHPAPI int php_network_getaddresses(const char *host, int socktype, struct socka
- 	} while ((sai = sai->ai_next) != NULL);
- 
- 	freeaddrinfo(res);
-+#else
-+#ifdef HAVE_INET_PTON
-+	if (!inet_pton(AF_INET, host, &in)) {
- #else
- 	if (!inet_aton(host, &in)) {
-+#endif
- 		if(strlen(host) > MAXFQDNLEN) {
- 			host_info = NULL;
- 			errno = E2BIG;
-@@ -555,7 +559,11 @@ PHPAPI int php_network_parse_network_address_with_port(const char *addr, zend_lo
- 		goto out;
- 	}
- #endif
-+#ifdef HAVE_INET_PTON
-+	if (inet_pton(AF_INET, tmp, &in4->sin_addr) > 0) {
-+#else
- 	if (inet_aton(tmp, &in4->sin_addr) > 0) {
-+#endif
- 		in4->sin_port = htons(port);
- 		in4->sin_family = AF_INET;
- 		*sl = sizeof(struct sockaddr_in);
-@@ -617,15 +625,19 @@ PHPAPI void php_network_populate_name_from_sockaddr(
- 	}
- 
- 	if (textaddr) {
--#if HAVE_IPV6 && HAVE_INET_NTOP
-+#ifdef HAVE_INET_NTOP
- 		char abuf[256];
- #endif
--		char *buf = NULL;
-+		const char *buf = NULL;
- 
- 		switch (sa->sa_family) {
- 			case AF_INET:
- 				/* generally not thread safe, but it *is* thread safe under win32 */
-+#ifdef HAVE_INET_NTOP
-+				buf = inet_ntop(AF_INET, &((struct sockaddr_in*)sa)->sin_addr, (char *)&abuf, sizeof(abuf));
-+#else
- 				buf = inet_ntoa(((struct sockaddr_in*)sa)->sin_addr);
-+#endif
- 				if (buf) {
- 					*textaddr = strpprintf(0, "%s:%d",
- 						buf, ntohs(((struct sockaddr_in*)sa)->sin_port));
-@@ -862,7 +874,11 @@ php_socket_t php_network_connect_socket_to_host(const char *host, unsigned short
- 
- 					in4->sin_family = sa->sa_family;
- 					in4->sin_port = htons(bindport);
-+#ifdef HAVE_INET_PTON
-+					if (!inet_pton(AF_INET, bindto, &in4->sin_addr)) {
-+#else
- 					if (!inet_aton(bindto, &in4->sin_addr)) {
-+#endif
- 						php_error_docref(NULL, E_WARNING, "Invalid IP Address: %s", bindto);
- 						goto skip_bind;
- 					}
-From e5b6f43ec7813392d83ea586b7902e0396a1f792 Mon Sep 17 00:00:00 2001
-From: Remi Collet <remi@remirepo.net>
-Date: Thu, 6 May 2021 14:21:29 +0200
-Subject: [PATCH] get rid of inet_addr usage
-
----
- main/fastcgi.c            | 4 ++++
- sapi/litespeed/lsapilib.c | 4 ++++
- 2 files changed, 8 insertions(+)
-
-diff --git a/main/fastcgi.c b/main/fastcgi.c
-index 071f69d3a7f0..c936d42405de 100644
---- a/main/fastcgi.c
-+++ b/main/fastcgi.c
-@@ -688,8 +688,12 @@ int fcgi_listen(const char *path, int backlog)
- 		if (!*host || !strncmp(host, "*", sizeof("*")-1)) {
- 			sa.sa_inet.sin_addr.s_addr = htonl(INADDR_ANY);
- 		} else {
-+#ifdef HAVE_INET_PTON
-+			if (!inet_pton(AF_INET, host, &sa.sa_inet.sin_addr)) {
-+#else
- 			sa.sa_inet.sin_addr.s_addr = inet_addr(host);
- 			if (sa.sa_inet.sin_addr.s_addr == INADDR_NONE) {
-+#endif
- 				struct hostent *hep;
- 
- 				if(strlen(host) > MAXFQDNLEN) {
-diff --git a/sapi/litespeed/lsapilib.c b/sapi/litespeed/lsapilib.c
-index a72b5dc1b988..305f3326a682 100644
---- a/sapi/litespeed/lsapilib.c
-+++ b/sapi/litespeed/lsapilib.c
-@@ -2672,8 +2672,12 @@ int LSAPI_ParseSockAddr( const char * pBind, struct sockaddr * pAddr )
-             ((struct sockaddr_in *)pAddr)->sin_addr.s_addr = htonl( INADDR_LOOPBACK );
-         else
-         {
-+#ifdef HAVE_INET_PTON
-+            if (!inet_pton(AF_INET, p, &((struct sockaddr_in *)pAddr)->sin_addr))
-+#else
-             ((struct sockaddr_in *)pAddr)->sin_addr.s_addr = inet_addr( p );
-             if ( ((struct sockaddr_in *)pAddr)->sin_addr.s_addr == INADDR_BROADCAST)
-+#endif
-             {
-                 doAddrInfo = 1;
-             }
-From 99d67d121acd4c324738509679d23acaf759d065 Mon Sep 17 00:00:00 2001
-From: Remi Collet <remi@remirepo.net>
-Date: Thu, 6 May 2021 16:35:48 +0200
-Subject: [PATCH] use getnameinfo instead of gethostbyaddr
-
----
- ext/standard/dns.c | 34 ++++++++++++++++++++++------------
- 1 file changed, 22 insertions(+), 12 deletions(-)
-
-diff --git a/ext/standard/dns.c b/ext/standard/dns.c
-index edd9a4549f5c..540c777faaba 100644
---- a/ext/standard/dns.c
-+++ b/ext/standard/dns.c
-@@ -169,20 +169,30 @@ PHP_FUNCTION(gethostbyaddr)
- static zend_string *php_gethostbyaddr(char *ip)
- {
- #if HAVE_IPV6 && HAVE_INET_PTON
--	struct in6_addr addr6;
--#endif
--	struct in_addr addr;
--	struct hostent *hp;
-+	struct sockaddr_in sa4;
-+	struct sockaddr_in6 sa6;
-+	char out[NI_MAXHOST];
- 
--#if HAVE_IPV6 && HAVE_INET_PTON
--	if (inet_pton(AF_INET6, ip, &addr6)) {
--		hp = gethostbyaddr((char *) &addr6, sizeof(addr6), AF_INET6);
--	} else if (inet_pton(AF_INET, ip, &addr)) {
--		hp = gethostbyaddr((char *) &addr, sizeof(addr), AF_INET);
--	} else {
--		return NULL;
-+	if (inet_pton(AF_INET6, ip, &sa6.sin6_addr)) {
-+		sa6.sin6_family = AF_INET6;
-+
-+		if (getnameinfo((struct sockaddr *)&sa6, sizeof(sa6), out, sizeof(out), NULL, 0, NI_NAMEREQD) < 0) {
-+			return zend_string_init(ip, strlen(ip), 0);
-+		}
-+		return zend_string_init(out, strlen(out), 0);
-+	} else if (inet_pton(AF_INET, ip, &sa4.sin_addr)) {
-+		sa4.sin_family = AF_INET;
-+
-+		if (getnameinfo((struct sockaddr *)&sa4, sizeof(sa4), out, sizeof(out), NULL, 0, NI_NAMEREQD) < 0) {
-+			return zend_string_init(ip, strlen(ip), 0);
-+		}
-+		return zend_string_init(out, strlen(out), 0);
- 	}
-+	return NULL; /* not a valid IP */
- #else
-+	struct in_addr addr;
-+	struct hostent *hp;
-+
- 	addr.s_addr = inet_addr(ip);
- 
- 	if (addr.s_addr == -1) {
-@@ -190,13 +200,13 @@ static zend_string *php_gethostbyaddr(char *ip)
- 	}
- 
- 	hp = gethostbyaddr((char *) &addr, sizeof(addr), AF_INET);
--#endif
- 
- 	if (!hp || hp->h_name == NULL || hp->h_name[0] == '\0') {
- 		return zend_string_init(ip, strlen(ip), 0);
- 	}
- 
- 	return zend_string_init(hp->h_name, strlen(hp->h_name), 0);
-+#endif
- }
- /* }}} */
- 

SOURCES/php-fpm-www.conf

@@ -1,5 +1,5 @@
 ; Start a new pool named 'www'.
-; the variable $pool can be used in any directive and will be replaced by the
+; the variable $pool can we used in any directive and will be replaced by the
 ; pool name ('www' here)
 [www]
 
@@ -128,7 +128,7 @@ pm.min_spare_servers = 5
 ; Note: Used only when pm is set to 'dynamic'
 ; Note: Mandatory when pm is set to 'dynamic'
 pm.max_spare_servers = 35
-
+ 
 ; The number of seconds after which an idle process will be killed.
 ; Note: Used only when pm is set to 'ondemand'
 ; Default Value: 10s
@@ -238,7 +238,7 @@ pm.max_spare_servers = 35
 ;       may conflict with a real PHP file.
 ; Default Value: not set
 ;pm.status_path = /status
-
+ 
 ; The ping URI to call the monitoring page of FPM. If this value is not set, no
 ; URI will be recognized as a ping page. This could be used to test from outside
 ; that FPM is alive and responding, or to
@@ -255,7 +255,7 @@ pm.max_spare_servers = 35
 ; response is formatted as text/plain with a 200 response code.
 ; Default Value: pong
 ;ping.response = pong
-
+ 
 ; The access log file
 ; Default: not set
 ;access.log = log/$pool.access.log
@@ -330,26 +330,22 @@ slowlog = /var/log/php-fpm/www-slow.log
 ; Default Value: 0
 ;request_slowlog_timeout = 0
 
-; Depth of slow log stack trace.
-; Default Value: 20
-;request_slowlog_trace_depth = 20
-
 ; The timeout for serving a single request after which the worker process will
 ; be killed. This option should be used when the 'max_execution_time' ini option
 ; does not stop script execution for some reason. A value of '0' means 'off'.
 ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
 ; Default Value: 0
 ;request_terminate_timeout = 0
-
+ 
 ; Set open file descriptor rlimit.
 ; Default Value: system defined value
 ;rlimit_files = 1024
-
+ 
 ; Set max core size rlimit.
 ; Possible Values: 'unlimited' or an integer greater or equal to 0
 ; Default Value: system defined value
 ;rlimit_core = 0
-
+ 
 ; Chroot to this directory at the start. This value must be defined as an
 ; absolute path. When this value is not set, chroot is not used.
 ; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
@@ -359,20 +355,20 @@ slowlog = /var/log/php-fpm/www-slow.log
 ;       possible. However, all PHP paths will be relative to the chroot
 ;       (error_log, sessions.save_path, ...).
 ; Default Value: not set
-;chroot =
-
+;chroot = 
+ 
 ; Chdir to this directory at the start.
 ; Note: relative path can be used.
 ; Default Value: current directory or / when chroot
 ;chdir = /var/www
-
+ 
 ; Redirect worker stdout and stderr into main error log. If not set, stdout and
 ; stderr will be redirected to /dev/null according to FastCGI specs.
 ; Note: on highloaded environement, this can cause some delay in the page
 ; process time (several ms).
 ; Default Value: no
 ;catch_workers_output = yes
-
+ 
 ; Clear environment in FPM workers
 ; Prevents arbitrary environment variables from reaching FPM worker processes
 ; by clearing the environment in workers before env vars specified in this
@@ -385,7 +381,7 @@ slowlog = /var/log/php-fpm/www-slow.log
 ; Limits the extensions of the main script FPM will allow to parse. This can
 ; prevent configuration mistakes on the web server side. You should only limit
 ; FPM to .php extensions to prevent malicious users to use other extensions to
-; execute php code.
+; exectute php code.
 ; Note: set an empty value to allow all extensions.
 ; Default Value: .php
 ;security.limit_extensions = .php .php3 .php4 .php5 .php7
@@ -403,7 +399,7 @@ slowlog = /var/log/php-fpm/www-slow.log
 ; overwrite the values previously defined in the php.ini. The directives are the
 ; same as the PHP SAPI:
 ;   php_value/php_flag             - you can set classic ini defines which can
-;                                    be overwritten from PHP call 'ini_set'.
+;                                    be overwritten from PHP call 'ini_set'. 
 ;   php_admin_value/php_admin_flag - these directives won't be overwritten by
 ;                                     PHP call 'ini_set'
 ; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.

SOURCES/php-fpm.conf

@@ -43,24 +43,6 @@ error_log = /var/log/php-fpm/error.log
 ; Default Value: notice
 ;log_level = notice
 
-; Log limit on number of characters in the single line (log entry). If the
-; line is over the limit, it is wrapped on multiple lines. The limit is for
-; all logged characters including message prefix and suffix if present. However
-; the new line character does not count into it as it is present only when
-; logging to a file descriptor. It means the new line character is not present
-; when logging to syslog.
-; Default Value: 1024
-;log_limit = 4096
-
-; Log buffering specifies if the log line is buffered which means that the
-; line is written in a single write operation. If the value is false, then the
-; data is written directly into the file descriptor. It is an experimental
-; option that can potentionaly improve logging performance and memory usage
-; for some heavy logging scenarios. This option is ignored if logging to syslog
-; as it has to be always buffered.
-; Default value: yes
-;log_buffering = no
-
 ; If this number of child processes exit with SIGSEGV or SIGBUS within the time
 ; interval set by emergency_restart_interval then FPM will restart. A value
 ; of '0' means 'Off'.

SOURCES/php.conf

@@ -19,13 +19,15 @@ DirectoryIndex index.php
 #
 # Redirect to local php-fpm (no mod_php in default configuration)
 #
-<IfModule !mod_php.c>
+<IfModule !mod_php5.c>
+  <IfModule !mod_php7.c>
     # Enable http authorization headers
     SetEnvIfNoCase ^Authorization$ "(.+)" HTTP_AUTHORIZATION=$1
 
     <FilesMatch \.(php|phar)$>
         SetHandler "proxy:unix:/run/php-fpm/www.sock|fcgi://localhost"
     </FilesMatch>
+  </IfModule>
 </IfModule>
 
 #
@@ -34,7 +36,7 @@ DirectoryIndex index.php
 #
 # mod_php options
 #
-<IfModule  mod_php.c>
+<IfModule  mod_php7.c>
     #
     # Cause the PHP interpreter to handle files with a .php extension.
     #

SOURCES/php.ini

@@ -15,7 +15,7 @@
 ; 5. The web server's directory (for SAPI modules), or directory of PHP
 ; (otherwise in Windows)
 ; 6. The directory from the --with-config-file-path compile time option, or the
-; Windows directory (usually C:\windows)
+; Windows directory (C:\windows or C:\winnt)
 ; See the PHP docs for more specific information.
 ; http://php.net/configuration.file
 
@@ -58,9 +58,9 @@
 ; An empty string can be denoted by simply not writing anything after the equal
 ; sign, or by using the None keyword:
 
-; foo =         ; sets foo to an empty string
-; foo = None    ; sets foo to an empty string
-; foo = "None"  ; sets foo to the string 'None'
+;  foo =         ; sets foo to an empty string
+;  foo = None    ; sets foo to an empty string
+;  foo = "None"  ; sets foo to the string 'None'
 
 ; If you use constants in your value, and these constants belong to a
 ; dynamically loaded extension (either a PHP extension or a Zend extension),
@@ -83,12 +83,11 @@
 ; development version only in development environments, as errors shown to
 ; application users can inadvertently leak otherwise secure information.
 
-; This is the php.ini-production INI file.
+; This is php.ini-production INI file.
 
 ;;;;;;;;;;;;;;;;;;;
 ; Quick Reference ;
 ;;;;;;;;;;;;;;;;;;;
-
 ; The following are all the settings which are different in either the production
 ; or development versions of the INIs with respect to PHP's default behavior.
 ; Please see the actual settings later in the document for more details as to why
@@ -100,15 +99,20 @@
 ;   Production Value: Off
 
 ; display_startup_errors
-;   Default Value: On
+;   Default Value: Off
 ;   Development Value: On
 ;   Production Value: Off
 
 ; error_reporting
-;   Default Value: E_ALL
+;   Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
 ;   Development Value: E_ALL
 ;   Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
 
+; html_errors
+;   Default Value: On
+;   Development Value: On
+;   Production value: On
+
 ; log_errors
 ;   Default Value: Off
 ;   Development Value: On
@@ -149,28 +153,23 @@
 ;   Development Value: Off
 ;   Production Value: Off
 
+; track_errors
+;   Default Value: Off
+;   Development Value: On
+;   Production Value: Off
+
 ; variables_order
 ;   Default Value: "EGPCS"
 ;   Development Value: "GPCS"
 ;   Production Value: "GPCS"
 
-; zend.exception_ignore_args
-;   Default Value: Off
-;   Development Value: Off
-;   Production Value: On
-
-; zend.exception_string_param_max_len
-;   Default Value: 15
-;   Development Value: 15
-;   Production Value: 0
-
 ;;;;;;;;;;;;;;;;;;;;
 ; php.ini Options  ;
 ;;;;;;;;;;;;;;;;;;;;
 ; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
 ;user_ini.filename = ".user.ini"
 
-; To disable this feature set this option to an empty value
+; To disable this feature set this option to empty value
 ;user_ini.filename =
 
 ; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
@@ -249,7 +248,7 @@ output_buffering = 4096
 ; Production Value: "form="
 ;url_rewriter.tags
 
-; URL rewriter will not rewrite absolute URL nor form by default. To enable
+; URL rewriter will not rewrites absolute URL nor form by default. To enable
 ; absolute URL rewrite, allowed hosts must be defined at RUNTIME.
 ; Refer to session.trans_sid_hosts for more details.
 ; Default Value: ""
@@ -295,13 +294,6 @@ implicit_flush = Off
 ; callback-function.
 unserialize_callback_func =
 
-; The unserialize_max_depth specifies the default depth limit for unserialized
-; structures. Setting the depth limit too high may result in stack overflows
-; during unserialization. The unserialize_max_depth ini setting can be
-; overridden by the max_depth option on individual unserialize() calls.
-; A value of 0 disables the depth limit.
-;unserialize_max_depth = 4096
-
 ; When floats & doubles are serialized, store serialize_precision significant
 ; digits after the floating point. The default value ensures that when floats
 ; are decoded with unserialize, the data will remain the same.
@@ -313,16 +305,15 @@ serialize_precision = -1
 ; open_basedir, if set, limits all file operations to the defined directory
 ; and below.  This directive makes most sense if used in a per-directory
 ; or per-virtualhost web server configuration file.
-; Note: disables the realpath cache
 ; http://php.net/open-basedir
 ;open_basedir =
 
-; This directive allows you to disable certain functions.
+; This directive allows you to disable certain functions for security reasons.
 ; It receives a comma-delimited list of function names.
 ; http://php.net/disable-functions
 disable_functions =
 
-; This directive allows you to disable certain classes.
+; This directive allows you to disable certain classes for security reasons.
 ; It receives a comma-delimited list of class names.
 ; http://php.net/disable-classes
 disable_classes =
@@ -346,7 +337,6 @@ disable_classes =
 ; Determines the size of the realpath cache to be used by PHP. This value should
 ; be increased on systems where PHP opens many files to reflect the quantity of
 ; the file operations performed.
-; Note: if open_basedir is set, the cache is disabled
 ; http://php.net/realpath-cache-size
 ;realpath_cache_size = 4096k
 
@@ -363,31 +353,15 @@ zend.enable_gc = On
 ; If enabled, scripts may be written in encodings that are incompatible with
 ; the scanner.  CP936, Big5, CP949 and Shift_JIS are the examples of such
 ; encodings.  To use this feature, mbstring extension must be enabled.
+; Default: Off
 ;zend.multibyte = Off
 
 ; Allows to set the default encoding for the scripts.  This value will be used
 ; unless "declare(encoding=...)" directive appears at the top of the script.
 ; Only affects if zend.multibyte is set.
+; Default: ""
 ;zend.script_encoding =
 
-; Allows to include or exclude arguments from stack traces generated for exceptions.
-; In production, it is recommended to turn this setting on to prohibit the output
-; of sensitive information in stack traces
-; Default Value: Off
-; Development Value: Off
-; Production Value: On
-zend.exception_ignore_args = On
-
-; Allows setting the maximum string length in an argument of a stringified stack trace
-; to a value between 0 and 1000000.
-; This has no effect when zend.exception_ignore_args is enabled.
-; Default Value: 15
-; Development Value: 15
-; Production Value: 0
-; In production, it is recommended to set this to 0 to reduce the output
-; of sensitive information in stack traces.
-zend.exception_string_param_max_len = 0
-
 ;;;;;;;;;;;;;;;;;
 ; Miscellaneous ;
 ;;;;;;;;;;;;;;;;;
@@ -423,9 +397,9 @@ max_input_time = 60
 ;max_input_nesting_level = 64
 
 ; How many GET/POST/COOKIE input variables may be accepted
-;max_input_vars = 1000
+; max_input_vars = 1000
 
-; Maximum amount of memory a script may consume
+; Maximum amount of memory a script may consume (128MB)
 ; http://php.net/memory-limit
 memory_limit = 128M
 
@@ -479,7 +453,7 @@ memory_limit = 128M
 ;   E_ALL & ~E_NOTICE  (Show all errors, except for notices)
 ;   E_ALL & ~E_NOTICE & ~E_STRICT  (Show all errors, except for notices and coding standards warnings.)
 ;   E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR  (Show only errors)
-; Default Value: E_ALL
+; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
 ; Development Value: E_ALL
 ; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
 ; http://php.net/error-reporting
@@ -503,9 +477,11 @@ error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT
 display_errors = Off
 
 ; The display of errors which occur during PHP's startup sequence are handled
-; separately from display_errors. We strongly recommend you set this to 'off'
-; for production servers to avoid leaking configuration details.
-; Default Value: On
+; separately from display_errors. PHP's default behavior is to suppress those
+; errors from clients. Turning the display of startup errors on can be useful in
+; debugging configuration problems. We strongly recommend you
+; set this to 'off' for production servers.
+; Default Value: Off
 ; Development Value: On
 ; Production Value: Off
 ; http://php.net/display-startup-errors
@@ -538,14 +514,24 @@ ignore_repeated_errors = Off
 ignore_repeated_source = Off
 
 ; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This is only effective in a debug compile, and if
+; stdout or in the log). This has only effect in a debug compile, and if
 ; error reporting includes E_WARNING in the allowed list
 ; http://php.net/report-memleaks
 report_memleaks = On
 
-; This setting is off by default.
+; This setting is on by default.
 ;report_zend_debug = 0
 
+; Store the last error/warning message in $php_errormsg (boolean). Setting this value
+; to On can assist in debugging and is appropriate for development servers. It should
+; however be disabled on production servers.
+; This directive is DEPRECATED.
+; Default Value: Off
+; Development Value: Off
+; Production Value: Off
+; http://php.net/track-errors
+;track_errors = Off
+
 ; Turn off normal error reporting and emit XML-RPC error XML
 ; http://php.net/xmlrpc-errors
 ;xmlrpc_errors = 0
@@ -557,8 +543,11 @@ report_memleaks = On
 ; error message as HTML for easier reading. This directive controls whether
 ; the error message is formatted as HTML or not.
 ; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: On
+; Development Value: On
+; Production value: On
 ; http://php.net/html-errors
-;html_errors = On
+html_errors = On
 
 ; If html_errors is set to On *and* docref_root is not empty, then PHP
 ; produces clickable error messages that direct to a page describing the error
@@ -593,29 +582,9 @@ report_memleaks = On
 ; http://php.net/error-log
 ; Example:
 ;error_log = php_errors.log
-; Log errors to syslog (Event Log on Windows).
+; Log errors to syslog.
 ;error_log = syslog
 
-; The syslog ident is a string which is prepended to every message logged
-; to syslog. Only used when error_log is set to syslog.
-;syslog.ident = php
-
-; The syslog facility is used to specify what type of program is logging
-; the message. Only used when error_log is set to syslog.
-;syslog.facility = user
-
-; Set this to disable filtering control characters (the default).
-; Some loggers only accept NVT-ASCII, others accept anything that's not
-; control characters. If your logger accepts everything, then no filtering
-; is needed at all.
-; Allowed values are:
-;   ascii (all printable ASCII characters and NL)
-;   no-ctrl (all characters except control characters)
-;   all (all characters)
-;   raw (like "all", but messages are not split at newlines)
-; http://php.net/syslog.filter
-;syslog.filter = ascii
-
 ;windows.show_crt_warning
 ; Default value: 0
 ; Development value: 0
@@ -683,7 +652,7 @@ register_argc_argv = Off
 ; first used (Just In Time) instead of when the script starts. If these
 ; variables are not used within a script, having this directive on will result
 ; in a performance gain. The PHP directive register_argc_argv must be disabled
-; for this directive to have any effect.
+; for this directive to have any affect.
 ; http://php.net/auto-globals-jit
 auto_globals_jit = On
 
@@ -765,13 +734,13 @@ user_dir =
 
 ; Directory in which the loadable extensions (modules) reside.
 ; http://php.net/extension-dir
-;extension_dir = "./"
+; extension_dir = "./"
 ; On windows:
-;extension_dir = "ext"
+; extension_dir = "ext"
 
 ; Directory where the temporary files should be placed.
 ; Defaults to the system default (see sys_get_temp_dir)
-;sys_temp_dir = "/tmp"
+; sys_temp_dir = "/tmp"
 
 ; Whether or not to enable the dl() function.  The dl() function does NOT work
 ; properly in multithreaded servers, such as IIS or Zeus, and is automatically
@@ -808,9 +777,10 @@ enable_dl = Off
 
 ; if cgi.discard_path is enabled, the PHP CGI binary can safely be placed outside
 ; of the web tree and people will not be able to circumvent .htaccess security.
+; http://php.net/cgi.dicard-path
 ;cgi.discard_path=1
 
-; FastCGI under IIS supports the ability to impersonate
+; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
 ; security tokens of the calling client.  This allows IIS to define the
 ; security context that the request runs under.  mod_fastcgi under Apache
 ; does not currently support this feature (03/17/2002)
@@ -938,10 +908,10 @@ cli_server.color = On
 ;date.default_longitude = 35.2333
 
 ; http://php.net/date.sunrise-zenith
-;date.sunrise_zenith = 90.833333
+;date.sunrise_zenith = 90.583333
 
 ; http://php.net/date.sunset-zenith
-;date.sunset_zenith = 90.833333
+;date.sunset_zenith = 90.583333
 
 [filter]
 ; http://php.net/filter.default
@@ -953,7 +923,7 @@ cli_server.color = On
 [iconv]
 ; Use of this INI entry is deprecated, use global input_encoding instead.
 ; If empty, default_charset or input_encoding or iconv.input_encoding is used.
-; The precedence is: default_charset < input_encoding < iconv.input_encoding
+; The precedence is: default_charset < intput_encoding < iconv.input_encoding
 ;iconv.input_encoding =
 
 ; Use of this INI entry is deprecated, use global internal_encoding instead.
@@ -968,13 +938,6 @@ cli_server.color = On
 ; otherwise output encoding conversion cannot be performed.
 ;iconv.output_encoding =
 
-[imap]
-; rsh/ssh logins are disabled by default. Use this INI entry if you want to
-; enable them. Note that the IMAP library does not filter mailbox names before
-; passing them to rsh/ssh command, thus passing untrusted data to this function
-; with rsh/ssh enabled is insecure.
-;imap.enable_insecure_rsh=0
-
 [intl]
 ;intl.default_locale =
 ; This directive allows you to produce PHP errors when some error
@@ -984,33 +947,22 @@ cli_server.color = On
 ;intl.use_exceptions = 0
 
 [sqlite3]
-; Directory pointing to SQLite3 extensions
-; http://php.net/sqlite3.extension-dir
 ;sqlite3.extension_dir =
 
-; SQLite defensive mode flag (only available from SQLite 3.26+)
-; When the defensive flag is enabled, language features that allow ordinary
-; SQL to deliberately corrupt the database file are disabled. This forbids
-; writing directly to the schema, shadow tables (eg. FTS data tables), or
-; the sqlite_dbpage virtual table.
-; https://www.sqlite.org/c3ref/c_dbconfig_defensive.html
-; (for older SQLite versions, this flag has no use)
-;sqlite3.defensive = 1
-
 [Pcre]
-; PCRE library backtracking limit.
+;PCRE library backtracking limit.
 ; http://php.net/pcre.backtrack-limit
 ;pcre.backtrack_limit=100000
 
-; PCRE library recursion limit.
-; Please note that if you set this value to a high number you may consume all
-; the available process stack and eventually crash PHP (due to reaching the
-; stack size limit imposed by the Operating System).
+;PCRE library recursion limit.
+;Please note that if you set this value to a high number you may consume all
+;the available process stack and eventually crash PHP (due to reaching the
+;stack size limit imposed by the Operating System).
 ; http://php.net/pcre.recursion-limit
 ;pcre.recursion_limit=100000
 
-; Enables or disables JIT compilation of patterns. This requires the PCRE
-; library to be compiled with JIT support.
+;Enables or disables JIT compilation of patterns. This requires the PCRE
+;library to be compiled with JIT support.
 pcre.jit=0
 
 [Pdo]
@@ -1018,9 +970,16 @@ pcre.jit=0
 ; http://php.net/pdo-odbc.connection-pooling
 ;pdo_odbc.connection_pooling=strict
 
+;pdo_odbc.db2_instance_name
+
 [Pdo_mysql]
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/pdo_mysql.cache_size
+pdo_mysql.cache_size = 2000
+
 ; Default socket name for local MySQL connects.  If empty, uses the built-in
 ; MySQL defaults.
+; http://php.net/pdo_mysql.default-socket
 pdo_mysql.default_socket=
 
 [Phar]
@@ -1043,12 +1002,12 @@ sendmail_path = /usr/sbin/sendmail -t -i
 ;mail.force_extra_parameters =
 
 ; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
-mail.add_x_header = Off
+mail.add_x_header = On
 
 ; The path to a log file that will log all mail() calls. Log entries include
 ; the full path of the script, line number, To address and headers.
 ;mail.log =
-; Log mail to syslog (Event Log on Windows).
+; Log mail to syslog;
 ;mail.log = syslog
 
 [ODBC]
@@ -1092,6 +1051,39 @@ odbc.defaultlrl = 4096
 ; http://php.net/odbc.defaultbinmode
 odbc.defaultbinmode = 1
 
+;birdstep.max_links = -1
+
+[Interbase]
+; Allow or prevent persistent links.
+ibase.allow_persistent = 1
+
+; Maximum number of persistent links.  -1 means no limit.
+ibase.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent).  -1 means no limit.
+ibase.max_links = -1
+
+; Default database name for ibase_connect().
+;ibase.default_db =
+
+; Default username for ibase_connect().
+;ibase.default_user =
+
+; Default password for ibase_connect().
+;ibase.default_password =
+
+; Default charset for ibase_connect().
+;ibase.default_charset =
+
+; Default timestamp format.
+ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
+
+; Default date format.
+ibase.dateformat = "%Y-%m-%d"
+
+; Default time format.
+ibase.timeformat = "%H:%M:%S"
+
 [MySQLi]
 
 ; Maximum number of persistent links.  -1 means no limit.
@@ -1110,6 +1102,10 @@ mysqli.allow_persistent = On
 ; http://php.net/mysqli.max-links
 mysqli.max_links = -1
 
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysqli.cache_size
+mysqli.cache_size = 2000
+
 ; Default port number for mysqli_connect().  If unset, mysqli_connect() will use
 ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
 ; compile-time value defined MYSQL_PORT (in that order).  Win32 will only look
@@ -1122,11 +1118,11 @@ mysqli.default_port = 3306
 ; http://php.net/mysqli.default-socket
 mysqli.default_socket =
 
-; Default host for mysqli_connect() (doesn't apply in safe mode).
+; Default host for mysql_connect() (doesn't apply in safe mode).
 ; http://php.net/mysqli.default-host
 mysqli.default_host =
 
-; Default user for mysqli_connect() (doesn't apply in safe mode).
+; Default user for mysql_connect() (doesn't apply in safe mode).
 ; http://php.net/mysqli.default-user
 mysqli.default_user =
 
@@ -1144,10 +1140,12 @@ mysqli.reconnect = Off
 [mysqlnd]
 ; Enable / Disable collection of general statistics by mysqlnd which can be
 ; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_statistics
 mysqlnd.collect_statistics = On
 
 ; Enable / Disable collection of memory usage statistics by mysqlnd which can be
 ; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_memory_statistics
 mysqlnd.collect_memory_statistics = Off
 
 ; Records communication from all extensions using mysqlnd to the specified log
@@ -1156,23 +1154,29 @@ mysqlnd.collect_memory_statistics = Off
 ;mysqlnd.debug =
 
 ; Defines which queries will be logged.
+; http://php.net/mysqlnd.log_mask
 ;mysqlnd.log_mask = 0
 
 ; Default size of the mysqlnd memory pool, which is used by result sets.
+; http://php.net/mysqlnd.mempool_default_size
 ;mysqlnd.mempool_default_size = 16000
 
 ; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
+; http://php.net/mysqlnd.net_cmd_buffer_size
 ;mysqlnd.net_cmd_buffer_size = 2048
 
 ; Size of a pre-allocated buffer used for reading data sent by the server in
 ; bytes.
+; http://php.net/mysqlnd.net_read_buffer_size
 ;mysqlnd.net_read_buffer_size = 32768
 
 ; Timeout for network requests in seconds.
+; http://php.net/mysqlnd.net_read_timeout
 ;mysqlnd.net_read_timeout = 31536000
 
 ; SHA-256 Authentication Plugin related. File with the MySQL server public RSA
 ; key.
+; http://php.net/mysqlnd.sha256_server_public_key
 ;mysqlnd.sha256_server_public_key =
 
 [PostgreSQL]
@@ -1251,11 +1255,10 @@ session.save_handler = files
 ;session.save_path = "/tmp"
 
 ; Whether to use strict session mode.
-; Strict session mode does not accept an uninitialized session ID, and
-; regenerates the session ID if the browser sends an uninitialized session ID.
-; Strict mode protects applications from session fixation via a session adoption
-; vulnerability. It is disabled by default for maximum compatibility, but
-; enabling it is encouraged.
+; Strict session mode does not accept uninitialized session ID and regenerate
+; session ID if browser sends uninitialized session ID. Strict mode protects
+; applications from session fixation via session adoption vulnerability. It is
+; disabled by default for maximum compatibility, but enabling it is encouraged.
 ; https://wiki.php.net/rfc/strict_sessions
 session.use_strict_mode = 0
 
@@ -1293,24 +1296,20 @@ session.cookie_path = /
 ; http://php.net/session.cookie-domain
 session.cookie_domain =
 
-; Whether or not to add the httpOnly flag to the cookie, which makes it
-; inaccessible to browser scripting languages such as JavaScript.
+; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
 ; http://php.net/session.cookie-httponly
 session.cookie_httponly =
 
-; Add SameSite attribute to cookie to help mitigate Cross-Site Request Forgery (CSRF/XSRF)
-; Current valid values are "Strict", "Lax" or "None". When using "None",
-; make sure to include the quotes, as `none` is interpreted like `false` in ini files.
-; https://tools.ietf.org/html/draft-west-first-party-cookies-07
-session.cookie_samesite =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
+; Handler used to serialize data.  php is the standard serializer of PHP.
 ; http://php.net/session.serialize-handler
 session.serialize_handler = php
 
-; Defines the probability that the 'garbage collection' process is started on every
-; session initialization. The probability is calculated by using gc_probability/gc_divisor,
-; e.g. 1/100 means there is a 1% chance that the GC process starts on each request.
+; Defines the probability that the 'garbage collection' process is started
+; on every session initialization. The probability is calculated by using
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator
+; and gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request.
 ; Default Value: 1
 ; Development Value: 1
 ; Production Value: 1
@@ -1318,9 +1317,13 @@ session.serialize_handler = php
 session.gc_probability = 1
 
 ; Defines the probability that the 'garbage collection' process is started on every
-; session initialization. The probability is calculated by using gc_probability/gc_divisor,
-; e.g. 1/100 means there is a 1% chance that the GC process starts on each request.
-; For high volume production servers, using a value of 1000 is a more efficient approach.
+; session initialization. The probability is calculated by using the following equation:
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
+; session.gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request. Increasing this value to 1000 will give you
+; a 0.1% chance the gc will run on any give request. For high volume production servers,
+; this is a more efficient approach.
 ; Default Value: 100
 ; Development Value: 1000
 ; Production Value: 1000
@@ -1336,8 +1339,8 @@ session.gc_maxlifetime = 1440
 ;       (see session.save_path above), then garbage collection does *not*
 ;       happen automatically.  You will need to do your own garbage
 ;       collection through a shell script, cron entry, or some other method.
-;       For example, the following script is the equivalent of setting
-;       session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
+;       For example, the following script would is the equivalent of
+;       setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
 ;          find /path/to/sessions -cmin +24 -type f | xargs rm
 
 ; Check HTTP Referer to invalidate externally stored URLs containing ids.
@@ -1370,7 +1373,7 @@ session.use_trans_sid = 0
 ; Set session ID character length. This value could be between 22 to 256.
 ; Shorter length than default is supported only for compatibility reason.
 ; Users should use 32 or more chars.
-; http://php.net/session.sid-length
+; http://php.net/session.sid_length
 ; Default Value: 32
 ; Development Value: 26
 ; Production Value: 26
@@ -1389,7 +1392,7 @@ session.sid_length = 26
 session.trans_sid_tags = "a=href,area=href,frame=src,form="
 
 ; URL rewriter does not rewrite absolute URLs by default.
-; To enable rewrites for absolute paths, target hosts must be specified
+; To enable rewrites for absolute pathes, target hosts must be specified
 ; at RUNTIME. i.e. use ini_set()
 ; <form> tags is special. PHP will check action attribute's URL regardless
 ; of session.trans_sid_tags setting.
@@ -1478,7 +1481,7 @@ zend.assertions = -1
 ; http://php.net/assert.active
 ;assert.active = On
 
-; Throw an AssertionError on failed assertions
+; Throw an AssertationException on failed assertions
 ; http://php.net/assert.exception
 ;assert.exception = On
 
@@ -1494,6 +1497,11 @@ zend.assertions = -1
 ; http://php.net/assert.callback
 ;assert.callback = 0
 
+; Eval the expression with current error_reporting().  Set to true if you want
+; error_reporting(0) around the eval().
+; http://php.net/assert.quiet-eval
+;assert.quiet_eval = 0
+
 [mbstring]
 ; language for internal character representation.
 ; This affects mb_send_mail() and mbstring.detect_order.
@@ -1509,9 +1517,9 @@ zend.assertions = -1
 
 ; Use of this INI entry is deprecated, use global input_encoding instead.
 ; http input encoding.
-; mbstring.encoding_translation = On is needed to use this setting.
+; mbstring.encoding_traslation = On is needed to use this setting.
 ; If empty, default_charset or input_encoding or mbstring.input is used.
-; The precedence is: default_charset < input_encoding < mbstring.http_input
+; The precedence is: default_charset < intput_encoding < mbsting.http_input
 ; http://php.net/mbstring.http-input
 ;mbstring.http_input =
 
@@ -1543,22 +1551,26 @@ zend.assertions = -1
 ; http://php.net/mbstring.substitute-character
 ;mbstring.substitute_character = none
 
-; Enable strict encoding detection.
-;mbstring.strict_detection = Off
+; overload(replace) single byte functions by mbstring functions.
+; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
+; etc. Possible values are 0,1,2,4 or combination of them.
+; For example, 7 for overload everything.
+; 0: No overload
+; 1: Overload mail() function
+; 2: Overload str*() functions
+; 4: Overload ereg*() functions
+; http://php.net/mbstring.func-overload
+;mbstring.func_overload = 0
+
+; enable strict encoding detection.
+; Default: Off
+;mbstring.strict_detection = On
 
 ; This directive specifies the regex pattern of content types for which mb_output_handler()
 ; is activated.
 ; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
 ;mbstring.http_output_conv_mimetype=
 
-; This directive specifies maximum stack depth for mbstring regular expressions. It is similar
-; to the pcre.recursion_limit for PCRE.
-;mbstring.regex_stack_limit=100000
-
-; This directive specifies maximum retry count for mbstring regular expressions. It is similar
-; to the pcre.backtrack_limit for PCRE.
-;mbstring.regex_retry_limit=1000000
-
 [gd]
 ; Tell the jpeg decode to ignore warnings and try to create
 ; a gd image. The warning will then be displayed as notices
@@ -1633,9 +1645,6 @@ ldap.max_links = -1
 [dba]
 ;dba.default_handler=
 
-[opcache]
-; see /etc/php.d/10-opcache.ini
-
 [curl]
 ; A default value for the CURLOPT_CAINFO option. This is required to be an
 ; absolute path.
@@ -1659,5 +1668,6 @@ ldap.max_links = -1
 ; SSL stream context option.
 ;openssl.capath=
 
-[ffi]
-; see /etc/php.d/20-ffi.ini
+; Local Variables:
+; tab-width: 4
+; End:

SOURCES/php.modconf

@@ -3,11 +3,10 @@
 # easy for developers to write dynamically generated webpages.
 #
 
-# Cannot load both php5, php7 and php modules
+# Cannot load both php5 and php7 modules
 <IfModule !mod_php5.c>
-  <IfModule !mod_php7.c>
-    <IfModule prefork.c>
-      LoadModule php_module modules/libphp.so
-    </IfModule>
+  <IfModule prefork.c>
+    LoadModule php7_module modules/libphp7.so
   </IfModule>
 </IfModule>
+

SOURCES/php.ztsmodconf

@@ -0,0 +1,7 @@
+
+<IfModule !mod_php5.c>
+  <IfModule !prefork.c>
+    # ZTS module is not supported, so FPM is preferred
+    # LoadModule php7_module modules/libphp7-zts.so
+  </IfModule>
+</IfModule>