rpms/perl
7
0
Fork 0
Code Issues Pull Requests Releases Activity
9b1e909266
perl/perl-update-Compress-Raw-Zlib.patch
Štěpán Kasal 357706338a - fix patch-update-Compress-Raw-Zlib.patch (did not patch Zlib.pm) 
- update Compress::Raw::Zlib to 2.023
- update IO::Compress::Base, and IO::Compress::Zlib to 2.015 (#542645)
2009-12-01 15:14:56 +00:00

1537 lines
45 KiB
Diff
Raw Blame History

Compress-Raw-Zlib-2.023
(omitting changes to private/MakeUtil.pm)
(omitting changes to perl-5.10.0/t/lib/compress; these are in
IO-Compress-Base 2.015 update)
diff -urN perl-5.10.0.orig/MANIFEST perl-5.10.0/MANIFEST
--- perl-5.10.0.orig/MANIFEST 2009-12-01 14:46:37.000000000 +0100
+++ perl-5.10.0/MANIFEST 2009-12-01 15:43:34.000000000 +0100
@@ -124,6 +124,7 @@
ext/Compress/Raw/Zlib/t/01version.t Compress::Raw::Zlib
ext/Compress/Raw/Zlib/t/02zlib.t Compress::Raw::Zlib
ext/Compress/Raw/Zlib/t/07bufsize.t Compress::Raw::Zlib
+ext/Compress/Raw/Zlib/t/09limitoutput.t Compress::Raw::Zlib
ext/Compress/Raw/Zlib/t/18lvalue.t Compress::Raw::Zlib
ext/Compress/Raw/Zlib/typemap Compress::Raw::Zlib
ext/Compress/Raw/Zlib/zlib-src/adler32.c Compress::Raw::Zlib
diff -urN perl-5.10.0.orig/ext/Compress/Raw/Zlib/Changes perl-5.10.0/ext/Compress/Raw/Zlib/Changes
--- perl-5.10.0.orig/ext/Compress/Raw/Zlib/Changes 2009-12-01 15:36:07.000000000 +0100
+++ perl-5.10.0/ext/Compress/Raw/Zlib/Changes 2009-12-01 15:38:24.000000000 +0100
@@ -1,6 +1,73 @@
CHANGES
-------
+ 2.023 9 November 2009
+
+ * fixed instance where $[ should have been $] in t/02zlib.t
+ Thanks to Robin Barker and zefram [RT #50765] for independantly
+ spotting the issue.
+
+ 2.021 30 August 2009
+
+ * Changed test harness so that it can cope with PERL5OPT=-MCarp=verbose
+ [RT# 47225]
+
+ 2.020 3 June 2009
+
+ * Minor documentation update.
+
+ 2.019 4 May 2009
+
+ * No Changes
+
+ 2.018 3 May 2009
+
+ * No Changes
+
+ 2.017 28 March 2009
+
+ * Added 'LimitOutput' option
+
+ * Removed MAN3PODS from Makefile.PL
+
+ * Fixed coring issue when LimitOutput was used.
+
+ * Documented Compress::Raw::Zlib::zlib_version()
+
+ * Documented Compress::Raw::Zlib::deflateReset()
+ [RT #40566]
+
+ 2.015 3 September 2008
+
+ * Makefile.PL
+ Backout changes made in 2.014
+
+ 2.014 2 September 2008
+
+ * Makefile.PL
+ Updated to check for indirect dependencies.
+
+ 2.012 15 July 2008
+
+ * Document the gzip flags that WindowBits can take.
+
+ * Allow a dictionary to be used with a raw inflate.
+ Needs zlib 1.2.2.1 or better.
+ [RT #36046]
+
+ 2.011 5 May 2008
+
+ * A C++-style comment sneaked in with the last update. Fixed.
+ [core patch #33828]
+
+ 2.010 5 May 2008
+
+ * No Changes
+
+ 2.009 20 April 2008
+
+ * No Changes
+
2.008 2 November 2007
* Minor documentation changes in README
diff -urN perl-5.10.0.orig/ext/Compress/Raw/Zlib/Makefile.PL perl-5.10.0/ext/Compress/Raw/Zlib/Makefile.PL
--- perl-5.10.0.orig/ext/Compress/Raw/Zlib/Makefile.PL 2009-12-01 14:47:16.000000000 +0100
+++ perl-5.10.0/ext/Compress/Raw/Zlib/Makefile.PL 2009-12-01 15:38:24.000000000 +0100
@@ -77,24 +77,11 @@
},
(
- $ENV{SKIP_FOR_CORE}
- ? (MAN3PODS => {})
- : ()
- ),
-
- (
$BUILD_ZLIB
? zlib_files($ZLIB_LIB)
: (LIBS => [ "-L$ZLIB_LIB -lz " ])
),
- (
- $] >= 5.005
- ? (ABSTRACT_FROM => 'lib/Compress/Raw/Zlib.pm',
- AUTHOR => 'Paul Marquess <pmqs@cpan.org>')
- : ()
- ),
-
INSTALLDIRS => ($] >= 5.009 ? 'perl' : 'site'),
((ExtUtils::MakeMaker->VERSION() gt '6.30') ?
diff -urN perl-5.10.0.orig/ext/Compress/Raw/Zlib/README perl-5.10.0/ext/Compress/Raw/Zlib/README
--- perl-5.10.0.orig/ext/Compress/Raw/Zlib/README 2009-12-01 15:36:07.000000000 +0100
+++ perl-5.10.0/ext/Compress/Raw/Zlib/README 2009-12-01 15:38:24.000000000 +0100
@@ -1,16 +1,14 @@
Compress-Raw-Zlib
- Version 2.008
+ Version 2.023
- 2nd November 2007
+ 9th November 2009
-
- Copyright (c) 2005-2007 Paul Marquess. All rights reserved.
+ Copyright (c) 2005-2009 Paul Marquess. All rights reserved.
This program is free software; you can redistribute it
and/or modify it under the same terms as Perl itself.
-
The directory zlib-src contains a subset of the
source files copied directly from zlib version 1.2.3.
These files are Copyright(C) 1995-2005
@@ -18,39 +16,27 @@
Full source for the zlib library is available at
http://www.zlib.org
-
-
DESCRIPTION
-----------
-
This module provides a Perl interface to the zlib compression library.
-
-
-
-
PREREQUISITES
-------------
Before you can build Compress-Raw-Zlib you need to have the following
installed on your system:
-
* A C compiler
* Perl 5.004 or better.
-
-
By default, Compress-Raw-Zlib will build its own private copy of the
zlib library. If you want to use a different version of
zlib, follow the instructions in the section called
"Controlling the version of zlib used by Compress-Raw-Zlib"
later in this document.
-
-
BUILDING THE MODULE
-------------------
@@ -61,8 +47,6 @@
make
make test
-
-
INSTALLATION
------------
@@ -70,9 +54,6 @@
make install
-
-
-
Controlling the version of zlib used by Compress-Raw-Zlib
----------------------------------------------------------
@@ -92,7 +73,6 @@
Note that if you intend to use either Option 2 or 3, you need to have
zlib version 1.0.5 or better.
-
The contents of the file config.in are used to control which of the
three options is actually used. This file is read during the
@@ -101,8 +81,6 @@
step of the build, so remember to make any required changes to config.in
before building this module.
-
-
Option 1
--------
@@ -169,10 +147,9 @@
------------------------
Every gzip stream stores a byte in its header to identify the Operating
-System that was used to create the gzip stream. When you build
-Compress-Raw-Zlib it will attempt to determine the value that is correct for
-your Operating System. This will then be used by IO::Gzip as the default
-value for the OS byte in all gzip headers it creates.
+System that was used to create the gzip stream. When you build Compress-Raw-Zlib it will attempt to determine the value that is correct for
+your Operating System. This will then be used by IO::Compress::Gzip as the
+default value for the OS byte in all gzip headers it creates.
The variable GZIP_OS_CODE in the config.in file controls the setting of
this value when building Compress-Raw-Zlib. If GZIP_OS_CODE is set to
@@ -197,16 +174,37 @@
detected is incorrect, please take a few moments to contact the author of
this module.
-
-
TROUBLESHOOTING
---------------
+Undefined Symbol gzsetparams
+----------------------------
+If you get the error shown below when you run the Compress-Raw-Zlib test
+harness it probably means you are running a copy of zlib that is
+version 1.0.5 or older.
+t/01version.........Can't load 'blib/arch/auto/Compress/Zlib/Zlib.so' for
+ module Compress::Raw::Zlib: blib/arch/auto/Compress/Raw/Zlib/Zlib.so:
+ undefined symbol: gzsetparams at ...
+There are two ways to fix this problem:
+ 1. Upgrade to the latest version of zlib.
+ 2. Edit config.in and set the OLD_ZLIB variable to True.
+
+Test Harness 01version fails
+----------------------------
+If the 01version test harness fails, and the problem isn't covered by the
+scenario above, it probably means that you have two versions of
+zlib installed on your system.
+
+Run the command below to see if this is indeed the case
+
+ make test TEST_VERBOSE=1 TEST_FILES=t/01version.t
+
+Try removing the one you don't want to use and rebuild.
Solaris build fails with "language optional software package not installed"
---------------------------------------------------------------------------
@@ -245,9 +243,6 @@
If that doesn't work for you, it's time to make changes to the Makefile
by hand. Good luck!
-
-
-
Solaris build fails with "gcc: unrecognized option `-KPIC'"
-----------------------------------------------------------
@@ -285,10 +280,6 @@
is necessary to have first built the zlib library with the -fpic
option.
-
-
-
-
Linux Notes
-----------
@@ -307,9 +298,6 @@
for zlib. Check for an RPM that start with "zlib-devel" in your Linux
distribution.
-
-
-
Win32 Notes
-----------
@@ -318,15 +306,11 @@
newer version of Compress-Raw-Zlib is available run this from the command
prompt
- C:\> ppm verify -upgrade Compress-Zlib
-
+ C:\> ppm verify -upgrade Compress-Raw-Zlib
If you are not running Activestate Perl and you don't have access
to a C compiler, you will not be able to build and install this module.
-
-
-
Win32 & Cygwin Notes
--------------------
@@ -338,7 +322,6 @@
The workaround is to install Compress-Raw-Zlib manually using the
instructions given at the start of this file.
-
FEEDBACK
--------
@@ -372,8 +355,7 @@
If you haven't installed Compress-Raw-Zlib then search Compress::Raw::Zlib.pm
for a line like this:
- $VERSION = "2.008" ;
-
+ $VERSION = "2.023" ;
c. The version of zlib you have used.
If you have successfully installed Compress-Raw-Zlib, this one-liner
@@ -381,10 +363,8 @@
perl -MCompress::Raw::Zlib -e "print q[zlib ver ]. Compress::Raw::Zlib::ZLIB_VERSION.qq[\n]"
-
If not, look at the beginning of the file zlib.h.
-
2. If you are having problems building Compress-Raw-Zlib, send me a
complete log of what happened. Start by unpacking the Compress-Raw-Zlib
module into a fresh directory and keep a log of all the steps
@@ -394,5 +374,4 @@
make
make test TEST_VERBOSE=1
-
Paul Marquess <pmqs@cpan.org>
diff -urN perl-5.10.0.orig/ext/Compress/Raw/Zlib/Zlib.xs perl-5.10.0/ext/Compress/Raw/Zlib/Zlib.xs
--- perl-5.10.0.orig/ext/Compress/Raw/Zlib/Zlib.xs 2009-12-01 15:36:07.000000000 +0100
+++ perl-5.10.0/ext/Compress/Raw/Zlib/Zlib.xs 2009-12-01 15:38:24.000000000 +0100
@@ -3,7 +3,7 @@
* Created : 22nd January 1996
* Version : 2.000
*
- * Copyright (c) 1995-2007 Paul Marquess. All rights reserved.
+ * Copyright (c) 1995-2009 Paul Marquess. All rights reserved.
* This program is free software; you can redistribute it and/or
* modify it under the same terms as Perl itself.
*
@@ -50,6 +50,10 @@
# define AT_LEAST_ZLIB_1_2_2_1
#endif
+#if defined(ZLIB_VERNUM) && ZLIB_VERNUM >= 0x1222
+# define AT_LEAST_ZLIB_1_2_2_2
+#endif
+
#if defined(ZLIB_VERNUM) && ZLIB_VERNUM >= 0x1223
# define AT_LEAST_ZLIB_1_2_2_3
#endif
@@ -64,6 +68,11 @@
# include "ppport.h"
#endif
+#if PERL_REVISION == 5 && PERL_VERSION == 9
+ /* For Andreas */
+# define sv_pvbyte_force(sv,lp) sv_pvbyten_force(sv,lp)
+#endif
+
#if PERL_REVISION == 5 && (PERL_VERSION < 8 || (PERL_VERSION == 8 && PERL_SUBVERSION < 4 ))
# ifdef SvPVbyte_force
@@ -103,6 +112,7 @@
#define FLAG_CRC32 2
#define FLAG_ADLER32 4
#define FLAG_CONSUME_INPUT 8
+#define FLAG_LIMIT_OUTPUT 16
uLong crc32 ;
uLong adler32 ;
z_stream stream;
@@ -228,7 +238,8 @@
#define adlerInitial adler32(0L, Z_NULL, 0)
#define crcInitial crc32(0L, Z_NULL, 0)
-static const char * const my_z_errmsg[] = {
+/* static const char * const my_z_errmsg[] = { */
+static const char my_z_errmsg[][32] = {
"need dictionary", /* Z_NEED_DICT 2 */
"stream end", /* Z_STREAM_END 1 */
"", /* Z_OK 0 */
@@ -460,6 +471,8 @@
printf(" CRC32 %s\n", EnDis(FLAG_CRC32));
printf(" ADLER32 %s\n", EnDis(FLAG_ADLER32));
printf(" CONSUME %s\n", EnDis(FLAG_CONSUME_INPUT));
+ printf(" LIMIT %s\n", EnDis(FLAG_LIMIT_OUTPUT));
+
#ifdef MAGIC_APPEND
printf(" window 0x%p\n", s->window);
@@ -510,7 +523,7 @@
static SV*
#ifdef CAN_PROTOTYPE
-deRef(SV * sv, char * string)
+deRef(SV * sv, const char * string)
#else
deRef(sv, string)
SV * sv ;
@@ -528,6 +541,8 @@
case SVt_PVHV:
case SVt_PVCV:
croak("%s: buffer parameter is not a SCALAR reference", string);
+ default:
+ break;
}
if (SvROK(sv))
croak("%s: buffer parameter is a reference to a reference", string) ;
@@ -542,7 +557,7 @@
static SV*
#ifdef CAN_PROTOTYPE
-deRef_l(SV * sv, char * string)
+deRef_l(SV * sv, const char * string)
#else
deRef_l(sv, string)
SV * sv ;
@@ -565,6 +580,8 @@
case SVt_PVHV:
case SVt_PVCV:
croak("%s: buffer parameter is not a SCALAR reference", string);
+ default:
+ break;
}
if (SvROK(sv))
croak("%s: buffer parameter is a reference to a reference", string) ;
@@ -802,6 +819,19 @@
s = NULL ;
}
else if (SvCUR(dictionary)) {
+#ifdef AT_LEAST_ZLIB_1_2_2_1
+ /* Zlib 1.2.2.1 or better allows a dictionary with raw inflate */
+ if (s->WindowBits < 0) {
+ err = inflateSetDictionary(&(s->stream),
+ (const Bytef*)SvPVbyte_nolen(dictionary),
+ SvCUR(dictionary));
+ if (err != Z_OK) {
+ Safefree(s) ;
+ s = NULL ;
+ }
+ }
+ else
+#endif
/* Dictionary specified - take a copy for use in inflate */
s->dictionary = newSVsv(dictionary) ;
}
@@ -1246,7 +1276,7 @@
bool eof
uInt cur_length = 0;
uInt prefix_length = 0;
- uInt increment = 0;
+ int increment = 0;
STRLEN stmp = NO_INIT
uLong bufinc = NO_INIT
PREINIT:
@@ -1280,22 +1310,39 @@
if((s->flags & FLAG_APPEND) != FLAG_APPEND) {
SvCUR_set(output, 0);
}
+
+ /* Assume no output buffer - the code below will update if there is any available */
+ s->stream.avail_out = 0;
+
+
if (SvLEN(output)) {
prefix_length = cur_length = SvCUR(output) ;
- s->stream.next_out = (Bytef*) SvPVbyte_nolen(output) + cur_length;
- increment = SvLEN(output) - cur_length - 1;
- s->stream.avail_out = increment;
- }
- else {
- s->stream.avail_out = 0;
+
+ if (s->flags & FLAG_LIMIT_OUTPUT && SvLEN(output) - cur_length - 1 < bufinc)
+ {
+ Sv_Grow(output, bufinc + cur_length + 1) ;
+ }
+
+ /* Only setup the stream output pointers if there is spare
+ capacity in the outout SV
+ */
+ if (SvLEN(output) > cur_length + 1)
+ {
+ s->stream.next_out = (Bytef*) SvPVbyte_nolen(output) + cur_length;
+ increment = SvLEN(output) - cur_length - 1;
+ s->stream.avail_out = increment;
+ }
}
+
+
s->bytesInflated = 0;
- while (1) {
+ RETVAL = Z_OK;
- if (s->stream.avail_out == 0 ) {
+ while (RETVAL == Z_OK) {
+ if (s->stream.avail_out == 0) {
/* out of space in the output buffer so make it bigger */
- Sv_Grow(output, SvLEN(output) + bufinc) ;
+ Sv_Grow(output, SvLEN(output) + bufinc +1) ;
cur_length += increment ;
s->stream.next_out = (Bytef*) SvPVbyte_nolen(output) + cur_length ;
increment = bufinc ;
@@ -1303,10 +1350,30 @@
bufinc *= 2 ;
}
+ /* printf("INFLATE Availl In %d, Out %d\n", s->stream.avail_in,
+ s->stream.avail_out);
+DispStream(s, "BEFORE");
+Perl_sv_dump(output); */
RETVAL = inflate(&(s->stream), Z_SYNC_FLUSH);
+ /* printf("INFLATE returned %d %s, avail in %d, out %d\n", RETVAL,
+ GetErrorString(RETVAL), s->stream.avail_in, s->stream.avail_out); */
+
+
+ if (RETVAL == Z_NEED_DICT && s->dictionary) {
+ s->dict_adler = s->stream.adler ;
+ RETVAL = inflateSetDictionary(&(s->stream),
+ (const Bytef*)SvPVbyte_nolen(s->dictionary),
+ SvCUR(s->dictionary));
+ if (RETVAL == Z_OK)
+ continue;
+ }
+
+ if (s->flags & FLAG_LIMIT_OUTPUT &&
+ (RETVAL == Z_OK || RETVAL == Z_BUF_ERROR ))
+ break;
if (RETVAL == Z_STREAM_ERROR || RETVAL == Z_MEM_ERROR ||
- RETVAL == Z_DATA_ERROR || RETVAL == Z_STREAM_END )
+ RETVAL == Z_DATA_ERROR || RETVAL == Z_STREAM_END )
break ;
if (RETVAL == Z_BUF_ERROR) {
@@ -1317,19 +1384,9 @@
break ;
}
}
-
- if (RETVAL == Z_NEED_DICT && s->dictionary) {
- s->dict_adler = s->stream.adler ;
- RETVAL = inflateSetDictionary(&(s->stream),
- (const Bytef*)SvPVbyte_nolen(s->dictionary),
- SvCUR(s->dictionary));
- }
-
- if (RETVAL != Z_OK)
- break;
}
#ifdef NEED_DUMMY_BYTE_AT_END
- if (eof && RETVAL == Z_OK) {
+ if (eof && RETVAL == Z_OK && s->flags & FLAG_LIMIT_OUTPUT == 0) {
Bytef* nextIn = s->stream.next_in;
uInt availIn = s->stream.avail_in;
s->stream.next_in = (Bytef*) " ";
@@ -1350,8 +1407,8 @@
#endif
s->last_error = RETVAL ;
- if (RETVAL == Z_OK || RETVAL == Z_STREAM_END || RETVAL == Z_DATA_ERROR) {
- unsigned in ;
+ if (RETVAL == Z_OK || RETVAL == Z_STREAM_END || RETVAL == Z_BUF_ERROR || RETVAL == Z_DATA_ERROR) {
+ unsigned in ;
s->bytesInflated = cur_length + increment - s->stream.avail_out - prefix_length;
s->uncompressedBytes += s->bytesInflated ;
@@ -1377,7 +1434,7 @@
SvCUR(output)-prefix_length) ;
/* fix the input buffer */
- if (s->flags & FLAG_CONSUME_INPUT) {
+ if (s->flags & FLAG_CONSUME_INPUT || s->flags & FLAG_LIMIT_OUTPUT) {
in = s->stream.avail_in ;
SvCUR_set(buf, in) ;
if (in)
@@ -1385,6 +1442,7 @@
*SvEND(buf) = '\0';
SvSETMAGIC(buf);
}
+
}
OUTPUT:
RETVAL
diff -urN perl-5.10.0.orig/ext/Compress/Raw/Zlib/lib/Compress/Raw/Zlib.pm perl-5.10.0/ext/Compress/Raw/Zlib/lib/Compress/Raw/Zlib.pm
--- perl-5.10.0.orig/ext/Compress/Raw/Zlib/lib/Compress/Raw/Zlib.pm 2009-12-01 15:36:07.000000000 +0100
+++ perl-5.10.0/ext/Compress/Raw/Zlib/lib/Compress/Raw/Zlib.pm 2009-12-01 15:38:24.000000000 +0100
@@ -13,7 +13,7 @@
use bytes ;
our ($VERSION, $XS_VERSION, @ISA, @EXPORT, $AUTOLOAD);
-$VERSION = '2.008';
+$VERSION = '2.023';
$XS_VERSION = $VERSION;
$VERSION = eval $VERSION;
@@ -62,8 +62,13 @@
Z_SYNC_FLUSH
Z_UNKNOWN
Z_VERSION_ERROR
+
+ WANT_GZIP
+ WANT_GZIP_OR_ZLIB
);
+use constant WANT_GZIP => 16;
+use constant WANT_GZIP_OR_ZLIB => 32;
sub AUTOLOAD {
my($constname);
@@ -79,6 +84,7 @@
use constant FLAG_CRC => 2 ;
use constant FLAG_ADLER => 4 ;
use constant FLAG_CONSUME_INPUT => 8 ;
+use constant FLAG_LIMIT_OUTPUT => 16 ;
eval {
require XSLoader;
@@ -361,10 +367,14 @@
$flags |= FLAG_CRC if $got->value('CRC32') ;
$flags |= FLAG_ADLER if $got->value('ADLER32') ;
+ my $windowBits = $got->value('WindowBits');
+ $windowBits += MAX_WBITS()
+ if ($windowBits & MAX_WBITS()) == 0 ;
+
_deflateInit($flags,
$got->value('Level'),
$got->value('Method'),
- $got->value('WindowBits'),
+ $windowBits,
$got->value('MemLevel'),
$got->value('Strategy'),
$got->value('Bufsize'),
@@ -378,6 +388,7 @@
my ($got) = ParseParameters(0,
{
'AppendOutput' => [1, 1, Parse_boolean, 0],
+ 'LimitOutput' => [1, 1, Parse_boolean, 0],
'CRC32' => [1, 1, Parse_boolean, 0],
'ADLER32' => [1, 1, Parse_boolean, 0],
'ConsumeInput' => [1, 1, Parse_boolean, 1],
@@ -397,8 +408,14 @@
$flags |= FLAG_CRC if $got->value('CRC32') ;
$flags |= FLAG_ADLER if $got->value('ADLER32') ;
$flags |= FLAG_CONSUME_INPUT if $got->value('ConsumeInput') ;
+ $flags |= FLAG_LIMIT_OUTPUT if $got->value('LimitOutput') ;
+
+
+ my $windowBits = $got->value('WindowBits');
+ $windowBits += MAX_WBITS()
+ if ($windowBits & MAX_WBITS()) == 0 ;
- _inflateInit($flags, $got->value('WindowBits'), $got->value('Bufsize'),
+ _inflateInit($flags, $windowBits, $got->value('Bufsize'),
$got->value('Dictionary')) ;
}
@@ -530,6 +547,7 @@
($d, $status) = new Compress::Raw::Zlib::Deflate( [OPT] ) ;
$status = $d->deflate($input, $output) ;
$status = $d->flush($output [, $flush_type]) ;
+ $d->deflateReset() ;
$d->deflateParams(OPTS) ;
$d->deflateTune(OPTS) ;
$d->dict_adler() ;
@@ -559,8 +577,7 @@
$crc = adler32_combine($crc1, $crc2, $len2)l
$crc = crc32_combine($adler1, $adler2, $len2)
- ZLIB_VERSION
- ZLIB_VERNUM
+ my $version = Compress::Raw::Zlib::zlib_version();
=head1 DESCRIPTION
@@ -568,8 +585,6 @@
compression library (see L</AUTHOR> for details about where to get
I<zlib>).
-
-
=head1 Compress::Raw::Zlib::Deflate
This section defines an interface that allows in-memory compression using
@@ -577,7 +592,6 @@
Here is a definition of the interface available:
-
=head2 B<($d, $status) = new Compress::Raw::Zlib::Deflate( [OPT] ) >
Initialises a deflation object.
@@ -610,7 +624,7 @@
C<Z_NO_COMPRESSION>, C<Z_BEST_SPEED>, C<Z_BEST_COMPRESSION>, and
C<Z_DEFAULT_COMPRESSION>.
-The default is Z_DEFAULT_COMPRESSION.
+The default is C<Z_DEFAULT_COMPRESSION>.
=item B<-Method>
@@ -619,10 +633,18 @@
=item B<-WindowBits>
+To compress an RFC 1950 data stream, set C<WindowBits> to a positive
+number between 8 and 15.
+
+To compress an RFC 1951 data stream, set C<WindowBits> to C<-MAX_WBITS>.
+
+To compress an RFC 1952 data stream (i.e. gzip), set C<WindowBits> to
+C<WANT_GZIP>.
+
For a definition of the meaning and valid values for C<WindowBits>
refer to the I<zlib> documentation for I<deflateInit2>.
-Defaults to MAX_WBITS.
+Defaults to C<MAX_WBITS>.
=item B<-MemLevel>
@@ -678,7 +700,6 @@
This option defaults to false.
-
=item B<-ADLER32>
If set to true, an adler32 checksum of the uncompressed data will be
@@ -686,7 +707,6 @@
This option defaults to false.
-
=back
Here is an example of using the C<Compress::Raw::Zlib::Deflate> optional
@@ -696,7 +716,6 @@
my $d = new Compress::Raw::Zlib::Deflate ( -Bufsize => 300,
-Level => Z_BEST_SPEED ) ;
-
=head2 B<$status = $d-E<gt>deflate($input, $output)>
Deflates the contents of C<$input> and writes the compressed data to
@@ -744,6 +763,16 @@
it is false, C<$output> will be truncated before any compressed data is
written to it.
+=head2 B<$status = $d-E<gt>deflateReset() >
+
+This method will reset the deflation object C<$d>. It can be used when you
+are compressing multiple data streams and want to use the same object to
+compress each of them. It should only be used once the previous data stream
+has been flushed successfully, i.e. a call to C<< $d->flush(Z_FINISH) >> has
+returned C<Z_OK>.
+
+Returns C<Z_OK> if successful.
+
=head2 B<$status = $d-E<gt>deflateParams([OPT])>
Change settings for the deflate object C<$d>.
@@ -751,7 +780,6 @@
The list of the valid options is shown below. Options not specified
will remain unchanged.
-
=over 5
=item B<-Level>
@@ -772,7 +800,6 @@
reallocated to increase the size, it will grow in increments of
C<Bufsize>.
-
=back
=head2 B<$status = $d-E<gt>deflateTune($good_length, $max_lazy, $nice_length, $max_chain)>
@@ -815,7 +842,6 @@
Returns the deflation strategy currently used. Valid values are
C<Z_DEFAULT_STRATEGY>, C<Z_FILTERED> and C<Z_HUFFMAN_ONLY>.
-
=head2 B<$d-E<gt>get_Level()>
Returns the compression level being used.
@@ -826,7 +852,6 @@
=head2 Example
-
Here is a trivial example of using C<deflate>. It simply reads standard
input, deflates it and writes it to standard output.
@@ -865,7 +890,6 @@
Here is a definition of the interface:
-
=head2 B< ($i, $status) = new Compress::Raw::Zlib::Inflate( [OPT] ) >
Initialises an inflation object.
@@ -894,14 +918,20 @@
=item B<-WindowBits>
To uncompress an RFC 1950 data stream, set C<WindowBits> to a positive
-number.
+number between 8 and 15.
To uncompress an RFC 1951 data stream, set C<WindowBits> to C<-MAX_WBITS>.
+To uncompress an RFC 1952 data stream (i.e. gzip), set C<WindowBits> to
+C<WANT_GZIP>.
+
+To auto-detect and uncompress an RFC 1950 or RFC 1952 data stream (i.e.
+gzip), set C<WindowBits> to C<WANT_GZIP_OR_ZLIB>.
+
For a full definition of the meaning and valid values for C<WindowBits>
refer to the I<zlib> documentation for I<inflateInit2>.
-Defaults to MAX_WBITS.
+Defaults to C<MAX_WBITS>.
=item B<-Bufsize>
@@ -928,7 +958,6 @@
This option defaults to false.
-
=item B<-CRC32>
If set to true, a crc32 checksum of the uncompressed data will be
@@ -946,7 +975,7 @@
=item B<-ConsumeInput>
If set to true, this option will remove compressed data from the input
-buffer of the the C< $i-E<gt>inflate > method as the inflate progresses.
+buffer of the C<< $i->inflate >> method as the inflate progresses.
This option can be useful when you are processing compressed data that is
embedded in another file/buffer. In this case the data that immediately
@@ -954,6 +983,29 @@
This option defaults to true.
+=item B<-LimitOutput>
+
+The C<LimitOutput> option changes the behavior of the C<< $i->inflate >>
+method so that the amount of memory used by the output buffer can be
+limited.
+
+When C<LimitOutput> is used the size of the output buffer used will either
+be the value of the C<Bufsize> option or the amount of memory already
+allocated to C<$output>, whichever is larger. Predicting the output size
+available is tricky, so don't rely on getting an exact output buffer size.
+
+When C<LimitOutout> is not specified C<< $i->inflate >> will use as much
+memory as it takes to write all the uncompressed data it creates by
+uncompressing the input buffer.
+
+If C<LimitOutput> is enabled, the C<ConsumeInput> option will also be
+enabled.
+
+This option defaults to false.
+
+See L</The LimitOutput option> for a discussion on why C<LimitOutput> is
+needed and how to use it.
+
=back
Here is an example of using an optional parameter to override the default
@@ -1048,7 +1100,6 @@
data streams. They must have been added explicitly when the data stream
was created by calling C<Compress::Deflate::flush> with C<Z_FULL_FLUSH>.
-
=head2 B<$i-E<gt>dict_adler()>
Returns the adler32 value for the dictionary.
@@ -1083,7 +1134,7 @@
Returns the buffer size used to carry out the decompression.
-=head2 Example
+=head2 Examples
Here is an example of using C<inflate>.
@@ -1102,10 +1153,9 @@
my ($output, $status) ;
while (read(STDIN, $input, 4096))
{
- $status = $x->inflate(\$input, $output) ;
+ $status = $x->inflate($input, $output) ;
- print $output
- if $status == Z_OK or $status == Z_STREAM_END ;
+ print $output ;
last if $status != Z_OK ;
}
@@ -1113,6 +1163,46 @@
die "inflation failed\n"
unless $status == Z_STREAM_END ;
+The next example show how to use the C<LimitOutput> option. Notice the use
+of two nested loops in this case. The outer loop reads the data from the
+input source - STDIN and the inner loop repeatedly calls C<inflate> until
+C<$input> is exhausted, we get an error, or the end of the stream is
+reached. One point worth remembering is by using the C<LimitOutput> option
+you also get C<ConsumeInput> set as well - this makes the code below much
+simpler.
+
+ use strict ;
+ use warnings ;
+
+ use Compress::Raw::Zlib;
+
+ my $x = new Compress::Raw::Zlib::Inflate(LimitOutput => 1)
+ or die "Cannot create a inflation stream\n" ;
+
+ my $input = '' ;
+ binmode STDIN;
+ binmode STDOUT;
+
+ my ($output, $status) ;
+
+ OUTER:
+ while (read(STDIN, $input, 4096))
+ {
+ do
+ {
+ $status = $x->inflate($input, $output) ;
+
+ print $output ;
+
+ last OUTER
+ unless $status == Z_OK || $status == Z_BUF_ERROR ;
+ }
+ while ($status == Z_OK && length $input);
+ }
+
+ die "inflation failed\n"
+ unless $status == Z_STREAM_END ;
+
=head1 CHECKSUM FUNCTIONS
Two functions are provided by I<zlib> to calculate checksums. For the
@@ -1135,24 +1225,163 @@
These functions allow checksums to be merged.
-=head1 ACCESSING ZIP FILES
+=head1 Misc
+
+=head2 my $version = Compress::Raw::Zlib::zlib_version();
+
+Returns the version of the zlib library.
+
+=head1 The LimitOutput option.
+
+By default C<< $i->inflate($input, $output) >> will uncompress I<all> data
+in C<$input> and write I<all> of the uncompressed data it has generated to
+C<$output>. This makes the interface to C<inflate> much simpler - if the
+method has uncompressed C<$input> successfully I<all> compressed data in
+C<$input> will have been dealt with. So if you are reading from an input
+source and uncompressing as you go the code will look something like this
+
+ use strict ;
+ use warnings ;
+
+ use Compress::Raw::Zlib;
+
+ my $x = new Compress::Raw::Zlib::Inflate()
+ or die "Cannot create a inflation stream\n" ;
+
+ my $input = '' ;
+
+ my ($output, $status) ;
+ while (read(STDIN, $input, 4096))
+ {
+ $status = $x->inflate($input, $output) ;
+
+ print $output ;
+
+ last if $status != Z_OK ;
+ }
+
+ die "inflation failed\n"
+ unless $status == Z_STREAM_END ;
+
+The points to note are
+
+=over 5
+
+=item *
+
+The main processing loop in the code handles reading of compressed data
+from STDIN.
+
+=item *
+
+The status code returned from C<inflate> will only trigger termination of
+the main processing loop if it isn't C<Z_OK>. When C<LimitOutput> has not
+been used the C<Z_OK> status means means that the end of the compressed
+data stream has been reached or there has been an error in uncompression.
+
+=item *
+
+After the call to C<inflate> I<all> of the uncompressed data in C<$input>
+will have been processed. This means the subsequent call to C<read> can
+overwrite it's contents without any problem.
+
+=back
+
+For most use-cases the behavior described above is acceptable (this module
+and it's predecessor, C<Compress::Zlib>, have used it for over 10 years
+without an issue), but in a few very specific use-cases the amount of
+memory required for C<$output> can prohibitively large. For example, if the
+compressed data stream contains the same pattern repeated thousands of
+times, a relatively small compressed data stream can uncompress into
+hundreds of megabytes. Remember C<inflate> will keep allocating memory
+until I<all> the uncompressed data has been written to the output buffer -
+the size of C<$output> is unbounded.
+
+The C<LimitOutput> option is designed to help with this use-case.
+
+The main difference in your code when using C<LimitOutput> is having to
+deal with cases where the C<$input> parameter still contains some
+uncompressed data that C<inflate> hasn't processed yet. The status code
+returned from C<inflate> will be C<Z_OK> if uncompression took place and
+C<Z_BUF_ERROR> if the output buffer is full.
+
+Below is typical code that shows how to use C<LimitOutput>.
+
+ use strict ;
+ use warnings ;
+
+ use Compress::Raw::Zlib;
+
+ my $x = new Compress::Raw::Zlib::Inflate(LimitOutput => 1)
+ or die "Cannot create a inflation stream\n" ;
+
+ my $input = '' ;
+ binmode STDIN;
+ binmode STDOUT;
+
+ my ($output, $status) ;
+
+ OUTER:
+ while (read(STDIN, $input, 4096))
+ {
+ do
+ {
+ $status = $x->inflate($input, $output) ;
-Although it is possible (with some effort on your part) to use this
-module to access .zip files, there is a module on CPAN that will do all
-the hard work for you. Check out the C<Archive::Zip> module on CPAN at
+ print $output ;
- http://www.cpan.org/modules/by-module/Archive/Archive-Zip-*.tar.gz
+ last OUTER
+ unless $status == Z_OK || $status == Z_BUF_ERROR ;
+ }
+ while ($status == Z_OK && length $input);
+ }
+
+ die "inflation failed\n"
+ unless $status == Z_STREAM_END ;
+Points to note this time:
+
+=over 5
+
+=item *
+
+There are now two nested loops in the code: the outer loop for reading the
+compressed data from STDIN, as before; and the inner loop to carry out the
+uncompression.
+
+=item *
+
+There are two exit points from the inner uncompression loop.
+
+Firstly when C<inflate> has returned a status other than C<Z_OK> or
+C<Z_BUF_ERROR>. This means that either the end of the compressed data
+stream has been reached (C<Z_STREAM_END>) or there is an error in the
+compressed data. In either of these cases there is no point in continuing
+with reading the compressed data, so both loops are terminated.
+
+The second exit point tests if there is any data left in the input buffer,
+C<$input> - remember that the C<ConsumeInput> option is automatically
+enabled when C<LimitOutput> is used. When the input buffer has been
+exhausted, the outer loop can run again and overwrite a now empty
+C<$input>.
+
+=back
+
+=head1 ACCESSING ZIP FILES
+
+Although it is possible (with some effort on your part) to use this module
+to access .zip files, there are other perl modules available that will
+do all the hard work for you. Check out C<Archive::Zip>,
+C<IO::Compress::Zip> and C<IO::Uncompress::Unzip>.
=head1 CONSTANTS
All the I<zlib> constants are automatically imported when you make use
of I<Compress::Raw::Zlib>.
-
=head1 SEE ALSO
-L<Compress::Zlib>, L<IO::Compress::Gzip>, L<IO::Uncompress::Gunzip>, L<IO::Compress::Deflate>, L<IO::Uncompress::Inflate>, L<IO::Compress::RawDeflate>, L<IO::Uncompress::RawInflate>, L<IO::Compress::Bzip2>, L<IO::Uncompress::Bunzip2>, L<IO::Compress::Lzop>, L<IO::Uncompress::UnLzop>, L<IO::Compress::Lzf>, L<IO::Uncompress::UnLzf>, L<IO::Uncompress::AnyInflate>, L<IO::Uncompress::AnyUncompress>
+L<Compress::Zlib>, L<IO::Compress::Gzip>, L<IO::Uncompress::Gunzip>, L<IO::Compress::Deflate>, L<IO::Uncompress::Inflate>, L<IO::Compress::RawDeflate>, L<IO::Uncompress::RawInflate>, L<IO::Compress::Bzip2>, L<IO::Uncompress::Bunzip2>, L<IO::Compress::Lzma>, L<IO::Uncompress::UnLzma>, L<IO::Compress::Xz>, L<IO::Uncompress::UnXz>, L<IO::Compress::Lzop>, L<IO::Uncompress::UnLzop>, L<IO::Compress::Lzf>, L<IO::Uncompress::UnLzf>, L<IO::Uncompress::AnyInflate>, L<IO::Uncompress::AnyUncompress>
L<Compress::Zlib::FAQ|Compress::Zlib::FAQ>
@@ -1160,7 +1389,6 @@
L<Archive::Tar|Archive::Tar>,
L<IO::Zlib|IO::Zlib>
-
For RFC 1950, 1951 and 1952 see
F<http://www.faqs.org/rfcs/rfc1950.html>,
F<http://www.faqs.org/rfcs/rfc1951.html> and
@@ -1174,25 +1402,18 @@
The primary site for gzip is F<http://www.gzip.org>.
-
-
-
=head1 AUTHOR
This module was written by Paul Marquess, F<pmqs@cpan.org>.
-
-
=head1 MODIFICATION HISTORY
See the Changes file.
=head1 COPYRIGHT AND LICENSE
-Copyright (c) 2005-2007 Paul Marquess. All rights reserved.
+Copyright (c) 2005-2009 Paul Marquess. All rights reserved.
This program is free software; you can redistribute it and/or
modify it under the same terms as Perl itself.
-
-
diff -urN perl-5.10.0.orig/ext/Compress/Raw/Zlib/t/02zlib.t perl-5.10.0/ext/Compress/Raw/Zlib/t/02zlib.t
--- perl-5.10.0.orig/ext/Compress/Raw/Zlib/t/02zlib.t 2009-12-01 15:36:07.000000000 +0100
+++ perl-5.10.0/ext/Compress/Raw/Zlib/t/02zlib.t 2009-12-01 15:38:24.000000000 +0100
@@ -24,13 +24,13 @@
my $count = 0 ;
if ($] < 5.005) {
- $count = 189 ;
+ $count = 230 ;
}
elsif ($] >= 5.006) {
- $count = 243 ;
+ $count = 300 ;
}
else {
- $count = 201 ;
+ $count = 258 ;
}
plan tests => $count + $extra;
@@ -443,10 +443,13 @@
# create a flush point
cmp_ok $x->flush($Answer, Z_FULL_FLUSH), '==', Z_OK ;
+
+ my $len1 = length $Answer;
cmp_ok $x->deflate($goodbye, $Answer), '==', Z_OK;
cmp_ok $x->flush($Answer), '==', Z_OK ;
+ my $len2 = length($Answer) - $len1 ;
my ($first, @Answer) = split('', $Answer) ;
@@ -475,7 +478,6 @@
$GOT .= $Z if defined $Z ;
# print "x $status\n";
last if $status == Z_STREAM_END or $status != Z_OK ;
-
}
cmp_ok $status, '==', Z_DATA_ERROR ;
@@ -488,7 +490,7 @@
my $initial = $1 ;
- ok(($k, $err) = new Compress::Raw::Zlib::Inflate(-ConsumeInput => 0)) ;
+ ok(($k, $err) = new Compress::Raw::Zlib::Inflate(ConsumeInput => 0)) ;
ok $k ;
cmp_ok $err, '==', Z_OK ;
@@ -499,8 +501,11 @@
cmp_ok $status, '==', Z_OK
or diag "status '$status'\nlength rest is " . length($rest) . "\n" ;
- cmp_ok $k->inflate($rest, $GOT), '==', Z_DATA_ERROR;
- is $Z . $GOT, $goodbye ;
+ is length($rest), $len2, "expected compressed output";
+
+ $GOT = '';
+ cmp_ok $k->inflate($rest, $GOT), '==', Z_DATA_ERROR, "inflate returns Z_DATA_ERROR";
+ is $GOT, $goodbye ;
}
{
@@ -598,7 +603,7 @@
foreach (1 .. 2)
{
- next if $[ < 5.005 ;
+ next if $] < 5.005 ;
title 'test inflate/deflate with a substr';
@@ -726,6 +731,142 @@
ok 1, "resetLastBlockByte(undef) is ok" ;
}
+{
+
+ title "gzip mode";
+ # ================
+
+ my $hello = "I am a HAL 9000 computer" ;
+ my @hello = split('', $hello) ;
+ my ($err, $x, $X, $status);
+
+ ok( ($x, $err) = new Compress::Raw::Zlib::Deflate (
+ WindowBits => WANT_GZIP ,
+ AppendOutput => 1
+ ), "Create deflate object" );
+ ok $x, "Compress::Raw::Zlib::Deflate ok" ;
+ cmp_ok $err, '==', Z_OK, "status is Z_OK" ;
+
+ $status = $x->deflate($hello, $X) ;
+ cmp_ok $status, '==', Z_OK, "deflate returned Z_OK" ;
+
+ cmp_ok $x->flush($X), '==', Z_OK, "flush returned Z_OK" ;
+
+ my ($k, $GOT);
+ ($k, $err) = new Compress::Raw::Zlib::Inflate(
+ WindowBits => WANT_GZIP ,
+ ConsumeInput => 0 ,
+ AppendOutput => 1);
+ ok $k, "Compress::Raw::Zlib::Inflate WANT_GZIP ok" ;
+ cmp_ok $err, '==', Z_OK, "status is Z_OK" ;
+
+ $status = $k->inflate($X, $GOT) ;
+ cmp_ok $status, '==', Z_STREAM_END, "Got Z_STREAM_END" ;
+ is $GOT, $hello, "uncompressed data matches ok" ;
+
+ $GOT = '';
+ ($k, $err) = new Compress::Raw::Zlib::Inflate(
+ WindowBits => WANT_GZIP_OR_ZLIB ,
+ AppendOutput => 1);
+ ok $k, "Compress::Raw::Zlib::Inflate WANT_GZIP_OR_ZLIB ok" ;
+ cmp_ok $err, '==', Z_OK, "status is Z_OK" ;
+
+ $status = $k->inflate($X, $GOT) ;
+ cmp_ok $status, '==', Z_STREAM_END, "Got Z_STREAM_END" ;
+ is $GOT, $hello, "uncompressed data matches ok" ;
+}
+
+{
+
+ title "gzip error mode";
+ # Create gzip -
+ # read with no special windowbits setting - this will fail
+ # then read with WANT_GZIP_OR_ZLIB - thi swill work
+ # ================
+
+ my $hello = "I am a HAL 9000 computer" ;
+ my ($err, $x, $X, $status);
+
+ ok( ($x, $err) = new Compress::Raw::Zlib::Deflate (
+ WindowBits => WANT_GZIP ,
+ AppendOutput => 1
+ ), "Create deflate object" );
+ ok $x, "Compress::Raw::Zlib::Deflate ok" ;
+ cmp_ok $err, '==', Z_OK, "status is Z_OK" ;
+
+ $status = $x->deflate($hello, $X) ;
+ cmp_ok $status, '==', Z_OK, "deflate returned Z_OK" ;
+
+ cmp_ok $x->flush($X), '==', Z_OK, "flush returned Z_OK" ;
+
+ my ($k, $GOT);
+ ($k, $err) = new Compress::Raw::Zlib::Inflate(
+ WindowBits => MAX_WBITS ,
+ ConsumeInput => 0 ,
+ AppendOutput => 1);
+ ok $k, "Compress::Raw::Zlib::Inflate WANT_GZIP ok" ;
+ cmp_ok $err, '==', Z_OK, "status is Z_OK" ;
+
+ $status = $k->inflate($X, $GOT) ;
+ cmp_ok $status, '==', Z_DATA_ERROR, "Got Z_DATA_ERROR" ;
+
+ $GOT = '';
+ ($k, $err) = new Compress::Raw::Zlib::Inflate(
+ WindowBits => WANT_GZIP_OR_ZLIB ,
+ AppendOutput => 1);
+ ok $k, "Compress::Raw::Zlib::Inflate WANT_GZIP_OR_ZLIB ok" ;
+ cmp_ok $err, '==', Z_OK, "status is Z_OK" ;
+
+ $status = $k->inflate($X, $GOT) ;
+ cmp_ok $status, '==', Z_STREAM_END, "Got Z_STREAM_END" ;
+ is $GOT, $hello, "uncompressed data matches ok" ;
+}
+
+{
+
+ title "gzip/zlib error mode";
+ # Create zlib -
+ # read with no WANT_GZIP windowbits setting - this will fail
+ # then read with WANT_GZIP_OR_ZLIB - thi swill work
+ # ================
+
+ my $hello = "I am a HAL 9000 computer" ;
+ my ($err, $x, $X, $status);
+
+ ok( ($x, $err) = new Compress::Raw::Zlib::Deflate (
+ AppendOutput => 1
+ ), "Create deflate object" );
+ ok $x, "Compress::Raw::Zlib::Deflate ok" ;
+ cmp_ok $err, '==', Z_OK, "status is Z_OK" ;
+
+ $status = $x->deflate($hello, $X) ;
+ cmp_ok $status, '==', Z_OK, "deflate returned Z_OK" ;
+
+ cmp_ok $x->flush($X), '==', Z_OK, "flush returned Z_OK" ;
+
+ my ($k, $GOT);
+ ($k, $err) = new Compress::Raw::Zlib::Inflate(
+ WindowBits => WANT_GZIP ,
+ ConsumeInput => 0 ,
+ AppendOutput => 1);
+ ok $k, "Compress::Raw::Zlib::Inflate WANT_GZIP ok" ;
+ cmp_ok $err, '==', Z_OK, "status is Z_OK" ;
+
+ $status = $k->inflate($X, $GOT) ;
+ cmp_ok $status, '==', Z_DATA_ERROR, "Got Z_DATA_ERROR" ;
+
+ $GOT = '';
+ ($k, $err) = new Compress::Raw::Zlib::Inflate(
+ WindowBits => WANT_GZIP_OR_ZLIB ,
+ AppendOutput => 1);
+ ok $k, "Compress::Raw::Zlib::Inflate WANT_GZIP_OR_ZLIB ok" ;
+ cmp_ok $err, '==', Z_OK, "status is Z_OK" ;
+
+ $status = $k->inflate($X, $GOT) ;
+ cmp_ok $status, '==', Z_STREAM_END, "Got Z_STREAM_END" ;
+ is $GOT, $hello, "uncompressed data matches ok" ;
+}
+
exit if $] < 5.006 ;
title 'Looping Append test with substr output - substr the end of the string';
diff -urN perl-5.10.0.orig/ext/Compress/Raw/Zlib/t/09limitoutput.t perl-5.10.0/ext/Compress/Raw/Zlib/t/09limitoutput.t
--- perl-5.10.0.orig/ext/Compress/Raw/Zlib/t/09limitoutput.t 1970-01-01 01:00:00.000000000 +0100
+++ perl-5.10.0/ext/Compress/Raw/Zlib/t/09limitoutput.t 2009-03-25 12:14:56.000000000 +0100
@@ -0,0 +1,129 @@
+BEGIN {
+ if ($ENV{PERL_CORE}) {
+ chdir 't' if -d 't';
+ @INC = ("../lib", "lib/compress");
+ }
+}
+
+use lib qw(t t/compress);
+use strict;
+use warnings;
+use bytes;
+
+use Test::More ;
+use CompTestUtils;
+
+BEGIN
+{
+ # use Test::NoWarnings, if available
+ my $extra = 0 ;
+ $extra = 1
+ if eval { require Test::NoWarnings ; import Test::NoWarnings; 1 };
+
+ plan tests => 98 + $extra ;
+
+ use_ok('Compress::Raw::Zlib', 2) ;
+}
+
+
+
+my $hello = "I am a HAL 9000 computer" x 2001;
+my $tmp = $hello ;
+
+my ($err, $x, $X, $status);
+
+ok( ($x, $err) = new Compress::Raw::Zlib::Deflate (-AppendOutput => 1));
+ok $x ;
+cmp_ok $err, '==', Z_OK, " status is Z_OK" ;
+
+my $out ;
+$status = $x->deflate($tmp, $out) ;
+cmp_ok $status, '==', Z_OK, " status is Z_OK" ;
+
+cmp_ok $x->flush($out), '==', Z_OK, " flush returned Z_OK" ;
+
+
+sub getOut { my $x = ''; return \$x }
+
+for my $bufsize (1, 2, 3, 13, 4096, 1024*10)
+{
+ print "#\n#Bufsize $bufsize\n#\n";
+ $tmp = $out;
+
+ my $k;
+ ok(($k, $err) = new Compress::Raw::Zlib::Inflate( AppendOutput => 1,
+ LimitOutput => 1,
+ Bufsize => $bufsize
+ ));
+ ok $k ;
+ cmp_ok $err, '==', Z_OK, " status is Z_OK" ;
+
+ ok ! defined $k->msg(), " no msg" ;
+ is $k->total_in(), 0, " total_in == 0" ;
+ is $k->total_out(), 0, " total_out == 0" ;
+ my $GOT = getOut();
+ my $prev;
+ my $deltaOK = 1;
+ my $looped = 0;
+ while (length $tmp)
+ {
+ ++ $looped;
+ my $prev = length $GOT;
+ $status = $k->inflate($tmp, $GOT) ;
+ last if $status == Z_STREAM_END || $status == Z_DATA_ERROR || $status == Z_STREAM_ERROR ;
+ $deltaOK = 0 if length($GOT) - $prev > $bufsize;
+ }
+
+ ok $deltaOK, " Output Delta never > $bufsize";
+ cmp_ok $looped, '>=', 1, " looped $looped";
+ is length($tmp), 0, " length of input buffer is zero";
+
+ cmp_ok $status, '==', Z_STREAM_END, " status is Z_STREAM_END" ;
+ is $$GOT, $hello, " got expected output" ;
+ ok ! defined $k->msg(), " no msg" ;
+ is $k->total_in(), length $out, " length total_in ok" ;
+ is $k->total_out(), length $hello, " length total_out ok " . $k->total_out() ;
+}
+
+sub getit
+{
+ my $obj = shift ;
+ my $input = shift;
+
+ my $data ;
+ 1 while $obj->inflate($input, $data) != Z_STREAM_END ;
+ return \$data ;
+}
+
+{
+ title "regression test";
+
+ my ($err, $x, $X, $status);
+
+ ok( ($x, $err) = new Compress::Raw::Zlib::Deflate (-AppendOutput => 1));
+ ok $x ;
+ cmp_ok $err, '==', Z_OK, " status is Z_OK" ;
+
+ my $line1 = ("abcdefghijklmnopq" x 1000) . "\n" ;
+ my $line2 = "second line\n" ;
+ my $text = $line1 . $line2 ;
+ my $tmp = $text;
+
+ my $out ;
+ $status = $x->deflate($tmp, $out) ;
+ cmp_ok $status, '==', Z_OK, " status is Z_OK" ;
+
+ cmp_ok $x->flush($out), '==', Z_OK, " flush returned Z_OK" ;
+
+ my $k;
+ ok(($k, $err) = new Compress::Raw::Zlib::Inflate( AppendOutput => 1,
+ LimitOutput => 1
+ ));
+
+
+ my $c = getit($k, $out);
+ is $$c, $text;
+
+
+}
+
Reference in New Issue View Git Blame Copy Permalink