import pcp-5.3.4-2.el8

SOURCES/remove-run-level-check.patch

@@ -0,0 +1,183 @@
+commit b9ff7d65b5e11cae35995495b4177443283c9a31
+Author: Mark Goodwin <mgoodwin@redhat.com>
+Date:   Wed Oct 13 12:04:35 2021 +1100
+
+    services: remove run-level check in pmlogger systemd service config
+    
+    Remove the run-level check (pmlogger_check -C flag) since systemd
+    uses targets for run-level checks. The run-level checks were causing
+    the pmlogger service to fail to manually start (via systemctl start
+    pmlogger) when the service is disabled.
+    
+    New test qa/1889 checks pmlogger still starts even if disabled (on
+    systemd platforms only). qa/808 is also reworked since it was running
+    pmlogger_check directly and was failing every *second* run.
+
+diff --git a/qa/1889 b/qa/1889
+new file mode 100755
+index 000000000..00b748968
+--- /dev/null
++++ b/qa/1889
+@@ -0,0 +1,68 @@
++#!/bin/sh
++# PCP QA Test No. 1889
++# test primary pmlogger starts under systemd when service is disabled
++#
++# Copyright (c) 2021 Red Hat.  All Rights Reserved.
++#
++seq=`basename $0`
++echo "QA output created by $seq"
++
++# get standard environment, filters and checks
++. ./common.product
++. ./common.filter
++. ./common.check
++
++# this tests systemd starting pmlogger
++which systemctl >/dev/null 2>&1 || _notrun "systemctl not installed"
++
++_cleanup()
++{
++    cd $here
++    if [ -n "$pid" ]
++    then
++	$sudo rm -f $PCP_TMP_DIR/pmlogger/$pid $PCP_RUN_DIR/pmlogger.$pid.socket
++    fi
++    $sudo rm -f $PCP_RUN_DIR/pmlogger.pid
++    echo "=== enable pmlogger.service"
++    $sudo systemctl enable pmlogger.service >/dev/null 2>&1
++    _restore_auto_restart pmlogger
++    _service pmlogger restart | _filter_pcp_start
++    rm -rf $tmp.*
++}
++
++status=1	# failure is the default!
++$sudo rm -rf $tmp.* $seq.full
++trap "_cleanup; exit \$status" 0 1 2 3 15
++
++# real QA test starts here
++_stop_auto_restart pmlogger
++
++pid=`$PCP_PS_PROG $PCP_PS_ALL_FLAGS | grep 'pmlogger.*-P' | \
++grep -v grep | awk '{print $2}'`
++
++if [ ! -S "$PCP_RUN_DIR/pmlogger.$pid.socket" ]; then
++    echo FAIL no primary pmlogger running? pid=$pid
++    status=1
++    exit
++fi
++echo found primary pmlogger and found control socket in PCP_RUN_DIR
++
++echo "=== disable pmlogger.service" | tee -a $seq.full
++$sudo systemctl disable pmlogger.service >>$seq.full 2>&1
++
++echo === start primary logger whilst disabled ===
++_service pmlogger start | _filter_pcp_start
++_wait_for_pmlogger
++
++newpid=`$PCP_PS_PROG $PCP_PS_ALL_FLAGS | grep 'pmlogger.*-P' | \
++    grep -v grep | awk '{print $2}'`
++
++if [ -z "$newpid" ]; then
++    echo FAIL pmlogger failed to start whilst disabled
++    status=1
++    exit
++fi
++echo found primary pmlogger and found control socket in PCP_RUN_DIR
++status=0
++
++exit
+diff --git a/qa/1889.out b/qa/1889.out
+new file mode 100644
+index 000000000..67d0e457f
+--- /dev/null
++++ b/qa/1889.out
+@@ -0,0 +1,6 @@
++QA output created by 1889
++found primary pmlogger and found control socket in PCP_RUN_DIR
++=== disable pmlogger.service
++=== start primary logger whilst disabled ===
++found primary pmlogger and found control socket in PCP_RUN_DIR
++=== enable pmlogger.service
+diff --git a/qa/808 b/qa/808
+index 6b0b64a7e..f1c796ee9 100755
+--- a/qa/808
++++ b/qa/808
+@@ -53,9 +53,9 @@ else
+     done
+     $sudo kill -0 $pid >/dev/null 2>&1 && echo "Arrggh, pid $pid won't die!"
+ 
+-    echo === running pmlogger_check to restart primary logger ===
+-    $sudo $PCP_BINADM_DIR/pmlogger_check -C
+-    sleep 2
++    echo === restart primary logger ===
++    _service pmlogger start | _filter_pcp_start
++    _wait_for_pmlogger
+ 
+     newpid=`$PCP_PS_PROG $PCP_PS_ALL_FLAGS | grep 'pmlogger.*-P' | \
+ 	grep -v grep | awk '{print $2}'`
+@@ -98,9 +98,9 @@ else
+     $sudo rm -f $PCP_RUN_DIR/pmlogger.primary.socket
+     $sudo ln $PCP_RUN_DIR/pmlogger.$pid.socket $PCP_RUN_DIR/pmlogger.primary.socket
+ 
+-    echo === running pmlogger_check to restart primary logger ===
+-    $sudo $PCP_BINADM_DIR/pmlogger_check -C
+-    sleep 2
++    echo === restart primary logger ===
++    _service pmlogger start | _filter_pcp_start
++    _wait_for_pmlogger
+ 
+     newpid=`$PCP_PS_PROG $PCP_PS_ALL_FLAGS | grep 'pmlogger.*-P' | \
+ 	grep -v grep | awk '{print $2}'`
+diff --git a/qa/808.out b/qa/808.out
+index fdd386503..be2f16086 100644
+--- a/qa/808.out
++++ b/qa/808.out
+@@ -1,7 +1,7 @@
+ QA output created by 808
+ found primary pmlogger and found control socket in PCP_RUN_DIR
+ === killing the primary pmlogger with SIGKILL ===
+-=== running pmlogger_check to restart primary logger ===
++=== restart primary logger ===
+ === checking with stale legacy hard links
+ === killing the primary pmlogger with SIGKILL ===
+-=== running pmlogger_check to restart primary logger ===
++=== restart primary logger ===
+diff --git a/qa/group b/qa/group
+index 7b50c353e..3f2033f53 100644
+--- a/qa/group
++++ b/qa/group
+@@ -1946,6 +1946,7 @@ x11
+ 1874 pmseries pmproxy local
+ 1876 pmcd secure local
+ 1886 pmseries libpcp_web local
++1889 pmlogger local
+ 1893 pmda.proc local
+ 1895 pmda.bpf local
+ 1896 pmlogger logutil pmlc local
+diff --git a/src/pmlogger/pmlogger.service.in b/src/pmlogger/pmlogger.service.in
+index 19b904cff..c24143734 100644
+--- a/src/pmlogger/pmlogger.service.in
++++ b/src/pmlogger/pmlogger.service.in
+@@ -9,7 +9,7 @@ Wants=pmcd.service
+ [Service]
+ Type=notify
+ NotifyAccess=all
+-Environment="PMLOGGER_CHECK_PARAMS=-C --only-primary"
++Environment="PMLOGGER_CHECK_PARAMS=--only-primary"
+ EnvironmentFile=-@PCP_SYSCONFIG_DIR@/pmlogger
+ TimeoutStartSec=120
+ TimeoutStopSec=120
+diff --git a/src/pmlogger/pmlogger_check.service.in b/src/pmlogger/pmlogger_check.service.in
+index af58997f3..ef24d30a5 100644
+--- a/src/pmlogger/pmlogger_check.service.in
++++ b/src/pmlogger/pmlogger_check.service.in
+@@ -13,7 +13,7 @@ TimeoutStopSec=120
+ # which is timer driven and exits. KillMode is temporary and will
+ # not be necessary once we have pmlogger-farm.service.
+ KillMode=process
+-Environment="PMLOGGER_CHECK_PARAMS=-C --skip-primary"
++Environment="PMLOGGER_CHECK_PARAMS=--skip-primary"
+ EnvironmentFile=-@PCP_SYSCONFIG_DIR@/pmlogger_timers
+ ExecStart=@PCP_BINADM_DIR@/pmlogger_check $PMLOGGER_CHECK_PARAMS
+ WorkingDirectory=@PCP_VAR_DIR@

SPECS/pcp.spec

@@ -1,6 +1,6 @@
 Name:    pcp
 Version: 5.3.4
-Release: 1%{?dist}
+Release: 2%{?dist}
 Summary: System-level performance monitoring and performance management
 License: GPLv2+ and LGPLv2+ and CC-BY
 URL:     https://pcp.io
@@ -8,6 +8,8 @@ URL:     https://pcp.io
 %global  artifactory https://performancecopilot.jfrog.io/artifactory
 Source0: %{artifactory}/pcp-source-release/pcp-%{version}.src.tar.gz
 
+Patch0:	remove-run-level-check.patch
+
 %if 0%{?fedora} >= 26 || 0%{?rhel} > 7
 %global __python2 python2
 %else
@@ -2263,6 +2265,7 @@ updated policy package.
 
 %prep
 %setup -q
+%patch0 -p1
 
 %build
 # the buildsubdir macro gets defined in %setup and is apparently only available in the next step (i.e. the %build step)
@@ -3339,6 +3342,9 @@ PCP_LOG_DIR=%{_logsdir}
 %files zeroconf -f pcp-zeroconf-files.rpm
 
 %changelog
+* Fri Oct 15 2021 Mark Goodwin <mgoodwin@redhat.com> - 5.3.4-2
+- Fix pmlogger manual start with service disabled (BZ 2018011)
+
 * Fri Oct 08 2021 Nathan Scott <nathans@redhat.com> - 5.3.4-1
 - Add pcp-atop(1) support for 'curscal' values (BZ 1984271)
 - Fix pcp-atop(1) reporting perfevent 'ipc' values (BZ 1986264)