parted/0020-tests-Use-wait_for_dev_to_-functions.patch

From f72968f996372d923dbeded302395d8f08445b31 Mon Sep 17 00:00:00 2001
From: "Brian C. Lane" <bcl@redhat.com>
Date: Fri, 7 Aug 2015 11:43:17 -0700
Subject: [PATCH 20/20] tests: Use wait_for_dev_to_ functions

Recent changes to udev have made some long-standing problems appear more
frequently. udev executes various actions when changes are made to
devices. Sometimes this can result in device nodes not appearing
immediately. Other times it can result in EBUSY being returned. This
patch only addresses devices that are slow to appear/disappear.

It is best to use the wait_for_dev_to_appear_ and
wait_for_dev_to_disappear_ functions than to test for existance. These
will loop and wait for up to 2 seconds for it to appear.

This also changes t9041 to fail if mkfs doesn't work since using skip
here may hide cases when the device node doesn't appear.

(cherry picked from commit 1dc13965e1108ab513662450e0171c3ea3af3bd1)
---
 tests/t1100-busy-label.sh                       | 10 ++--------
 tests/t1102-loop-label.sh                       | 25 +++++--------------------
 tests/t2320-dos-extended-noclobber.sh           |  1 +
 tests/t6001-psep.sh                             |  4 ++--
 tests/t6004-dm-many-partitions.sh               |  6 ++----
 tests/t6006-dm-512b-sectors.sh                  |  1 +
 tests/t6100-mdraid-partitions.sh                |  5 +++--
 tests/t9041-undetected-in-use-16th-partition.sh |  2 +-
 8 files changed, 17 insertions(+), 37 deletions(-)

diff --git a/tests/t1100-busy-label.sh b/tests/t1100-busy-label.sh
index 4e256d3..70e8ede 100755
--- a/tests/t1100-busy-label.sh
+++ b/tests/t1100-busy-label.sh
@@ -27,22 +27,16 @@ dev=$(cat dev-name)
 
 parted -s "$dev" mklabel msdos mkpart primary fat32 1 40 > out 2>&1 || fail=1
 compare /dev/null out || fail=1
-mkfs.vfat ${dev}1 || skip_ "mkfs.vfat failed"
+wait_for_dev_to_appear_ ${dev}1 || fail=1
+mkfs.vfat ${dev}1 || fail=1
 
 mount_point="`pwd`/mnt"
 
 # Be sure to unmount upon interrupt, failure, etc.
 cleanup_fn_() { umount "${dev}1" > /dev/null 2>&1; }
 
-# There's a race condition here: on udev-based systems, the partition#1
-# device, ${dev}1 (i.e., /dev/sdd1) is not created immediately, and
-# without some delay, this mount command would fail.  Using a flash card
-# as $dev, the loop below typically iterates 7-20 times.
-
 # create mount point dir. and mount the just-created partition on it
 mkdir $mount_point || fail=1
-i=0; while :; do test -e "${dev}1" && break; test $i = 90 && break;
-  i=$(expr $i + 1); done;
 mount "${dev}1" $mount_point || fail=1
 
 # now that a partition is mounted, mklabel attempt must fail
diff --git a/tests/t1102-loop-label.sh b/tests/t1102-loop-label.sh
index 9752002..68b9af4 100644
--- a/tests/t1102-loop-label.sh
+++ b/tests/t1102-loop-label.sh
@@ -44,15 +44,9 @@ mv out o2 && sed -e "s,$dev,DEVICE,;s/  *$//" o2 > out
 
 compare exp out || fail=1
 parted -s $dev rm 1 || fail=1
-if [ -e ${dev}1 ]; then
-    echo "Partition should not exist on loop device"
-    fail=1
-fi
+wait_for_dev_to_disappear_ ${dev}1 2 || fail=1
 partprobe $dev || fail=1
-if [ -e ${dev}1 ]; then
-    echo "Partition should not exist on loop device"
-    fail=1
-fi
+wait_for_dev_to_disappear_ ${dev}1 2 || fail=1
 
 mount_point="`pwd`/mnt"
 
@@ -80,24 +74,15 @@ umount "$mount_point"
 
 # make sure partprobe cleans up stale partition devices
 parted -s $dev mklabel msdos mkpart primary ext2 0% 100% || fail=1
-if [ ! -e ${dev}1 ]; then
-    echo "Partition doesn't exist on loop device"
-    fail=1
-fi
+wait_for_dev_to_appear_ ${dev}1 || fail=1
 
 mke2fs -F $dev
 partprobe $dev || fail=1
-if [ -e ${dev}1 ]; then
-    echo "Partition should not exist on loop device"
-    fail=1
-fi
+wait_for_dev_to_disappear_ ${dev}1 2 || fail=1
 
 # make sure new loop label removes old partitions > 1
 parted -s $dev mklabel msdos mkpart primary ext2 0% 50% mkpart primary ext2 50% 100% || fail=1
 parted -s $dev mklabel loop || fail=1
-if [ -e ${dev}2 ]; then
-    echo "Partition 2 not removed"
-    fail=1
-fi
+wait_for_dev_to_disappear_ ${dev}2 2 || fail=1
 
 Exit $fail
diff --git a/tests/t2320-dos-extended-noclobber.sh b/tests/t2320-dos-extended-noclobber.sh
index 6f3dfff..bbc4f26 100644
--- a/tests/t2320-dos-extended-noclobber.sh
+++ b/tests/t2320-dos-extended-noclobber.sh
@@ -32,6 +32,7 @@ scsi_dev=$(cat dev-name)
 parted -s $scsi_dev mklabel msdos || fail=1
 parted -s $scsi_dev mkpart extended 1 5 > out 2>&1 || fail=1
 parted -s $scsi_dev mkpart primary 5 10 > out 2>&1 || fail=1
+wait_for_dev_to_appear_ ${scsi_dev}1 || fail=1
 
 # Make sure the size of the extended partition is correct.
 # 2 sectors for 512b and 1 sector for larger. /sys/.../size is in
diff --git a/tests/t6001-psep.sh b/tests/t6001-psep.sh
index f15090a..4c758e8 100644
--- a/tests/t6001-psep.sh
+++ b/tests/t6001-psep.sh
@@ -54,7 +54,7 @@ parted -s $dev mklabel msdos mkpart primary fat32 1m 5m > out 2>&1 || fail=1
 compare /dev/null out || fail=1
 
 #make sure device name is correct
-test -e ${dev}p1 || fail=1
+wait_for_dev_to_appear_ ${dev}p1 || fail=1
 
 #repeat on name not ending in a digit
 # setup: create a mapping
@@ -66,7 +66,7 @@ parted -s $dev mklabel msdos mkpart primary fat32 1m 5m > out 2>&1 || fail=1
 compare /dev/null out || fail=1
 
 #make sure device name is correct
-test -e ${dev}1 || fail=1
+wait_for_dev_to_appear_ ${dev}1 || fail=1
 
 if [ -n "$fail" ]; then
     ls /dev/mapper
diff --git a/tests/t6004-dm-many-partitions.sh b/tests/t6004-dm-many-partitions.sh
index 8d291ef..7ebc48a 100755
--- a/tests/t6004-dm-many-partitions.sh
+++ b/tests/t6004-dm-many-partitions.sh
@@ -49,10 +49,8 @@ parted -m -a min -s /dev/mapper/$dm_name mklabel gpt $cmd > /dev/null 2>&1 || fa
 
 # Make sure all the partitions appeared under /dev/mapper/
 for ((i=1; i<=$n_partitions; i+=1)); do
-    if [ ! -e "/dev/mapper/${dm_name}p$i" ]; then
-        fail=1
-        break
-    fi
+    wait_for_dev_to_appear_ "/dev/mapper/${dm_name}p$i" || { fail=1; break; }
+
     # remove the partitions as we go, otherwise cleanup won't work.
     dmsetup remove /dev/mapper/${dm_name}p$i
 done
diff --git a/tests/t6006-dm-512b-sectors.sh b/tests/t6006-dm-512b-sectors.sh
index 31abba9..c3045af 100644
--- a/tests/t6006-dm-512b-sectors.sh
+++ b/tests/t6006-dm-512b-sectors.sh
@@ -60,6 +60,7 @@ dev="/dev/mapper/$linear_"
 # Create msdos partition table with a partition from 1MiB to 100MiB
 parted -s $dev mklabel msdos mkpart primary ext2 1MiB 101MiB > out 2>&1 || fail=1
 compare /dev/null out || fail=1
+wait_for_dev_to_appear_ ${dev}1 || fail=1
 
 # The size of the partition should be 100MiB, or 204800 512b sectors
 p1_size=$(blockdev --getsz ${dev}1) || framework_failure
diff --git a/tests/t6100-mdraid-partitions.sh b/tests/t6100-mdraid-partitions.sh
index 6f08442..dbc5986 100755
--- a/tests/t6100-mdraid-partitions.sh
+++ b/tests/t6100-mdraid-partitions.sh
@@ -54,13 +54,14 @@ parted -s $md_dev mklabel gpt \
 compare /dev/null out || fail=1
 
 # Verify that kernel has been informed about the second device.
-grep "${md_name}p2" /proc/partitions || { fail=1; cat /proc/partitions; }
+wait_for_dev_to_appear_ ${md_dev}p2 || { fail=1; cat /proc/partitions; }
 
 # Remove partitions from the raid device.
 parted -s $md_dev rm 2 rm 1 > out 2>&1 || fail=1
 compare /dev/null out || fail=1
 
 # Verify that kernel has been informed about those removals.
-grep "${md_name}p[12]" /proc/partitions && { fail=1; cat /proc/partitions; }
+wait_for_dev_to_disappear_ ${md_dev}p1 2 || { fail=1; cat /proc/partitions; }
+wait_for_dev_to_disappear_ ${md_dev}p2 2 || { fail=1; cat /proc/partitions; }
 
 Exit $fail
diff --git a/tests/t9041-undetected-in-use-16th-partition.sh b/tests/t9041-undetected-in-use-16th-partition.sh
index edaae1b..673e508 100644
--- a/tests/t9041-undetected-in-use-16th-partition.sh
+++ b/tests/t9041-undetected-in-use-16th-partition.sh
@@ -72,7 +72,7 @@ wait_for_dev_to_appear_ ${scsi_dev}16 || fail_ ${scsi_dev}16 did not appear
 
 partitions="${scsi_dev}14 ${scsi_dev}15 ${scsi_dev}16"
 for i in $partitions; do
-  mkfs.ext3 $i || skip_ mkfs.ext3 $i failed
+  mkfs.ext3 $i || fail=1
 done
 
 # be sure to unmount upon interrupt, failure, etc.
-- 
2.4.3