Latest upstream version, now systemd friendly

Signed-off-by: Doug Ledford <dledford@redhat.com>

.gitignore

@@ -22,3 +22,5 @@ opensm-3.3.9/
 opensm-3.3.12/
 /opensm-3.3.13.tar.gz
 /opensm-3.3.13/
+/opensm-3.3.15.tar.gz
+/opensm-3.3.15/

opensm-3.3.13.conf

@@ -0,0 +1,410 @@
+#
+# DEVICE ATTRIBUTES OPTIONS
+#
+# The port GUID on which the OpenSM is running
+guid 0x0000000000000000
+
+# M_Key value sent to all ports qualifying all Set(PortInfo)
+m_key 0x0000000000000000
+
+# The lease period used for the M_Key on this subnet in [sec]
+m_key_lease_period 0
+
+# SM_Key value of the SM used for SM authentication
+sm_key 0x0000000000000001
+
+# SM_Key value to qualify rcv SA queries as 'trusted'
+sa_key 0x0000000000000001
+
+# Note that for both values above (sm_key and sa_key)
+# OpenSM version 3.2.1 and below used the default value '1'
+# in a host byte order, it is fixed now but you may need to
+# change the values to interoperate with old OpenSM running
+# on a little endian machine.
+
+# Subnet prefix used on this subnet
+subnet_prefix 0xfe80000000000000
+
+# The LMC value used on this subnet
+lmc 0
+
+# lmc_esp0 determines whether LMC value used on subnet is used for
+# enhanced switch port 0. If TRUE, LMC value for subnet is used for
+# ESP0. Otherwise, LMC value for ESP0s is 0.
+lmc_esp0 FALSE
+
+# sm_sl determines SMSL used for SM/SA communication
+sm_sl 0
+
+# The code of maximal time a packet can live in a switch
+# The actual time is 4.096usec * 2^<packet_life_time>
+# The value 0x14 disables this mechanism
+packet_life_time 0x12
+
+# The number of sequential packets dropped that cause the port
+# to enter the VLStalled state. The result of setting this value to
+# zero is undefined.
+vl_stall_count 0x07
+
+# The number of sequential packets dropped that cause the port
+# to enter the VLStalled state. This value is for switch ports
+# driving a CA or router port. The result of setting this value
+# to zero is undefined.
+leaf_vl_stall_count 0x07
+
+# The code of maximal time a packet can wait at the head of
+# transmission queue.
+# The actual time is 4.096usec * 2^<head_of_queue_lifetime>
+# The value 0x14 disables this mechanism
+head_of_queue_lifetime 0x12
+
+# The maximal time a packet can wait at the head of queue on
+# switch port connected to a CA or router port
+leaf_head_of_queue_lifetime 0x10
+
+# Limit the maximal operational VLs
+max_op_vls 5
+
+# Force PortInfo:LinkSpeedEnabled on switch ports
+# If 0, don't modify PortInfo:LinkSpeedEnabled on switch port
+# Otherwise, use value for PortInfo:LinkSpeedEnabled on switch port
+# Values are (IB Spec 1.2.1, 14.2.5.6 Table 146 "PortInfo")
+#    1: 2.5 Gbps
+#    3: 2.5 or 5.0 Gbps
+#    5: 2.5 or 10.0 Gbps
+#    7: 2.5 or 5.0 or 10.0 Gbps
+#    2,4,6,8-14 Reserved
+#    Default 15: set to PortInfo:LinkSpeedSupported
+force_link_speed 15
+
+# Force PortInfo:LinkSpeedExtEnabled on ports
+# If 0, don't modify PortInfo:LinkSpeedExtEnabled on port
+# Otherwise, use value for PortInfo:LinkSpeedExtEnabled on port
+# Values are (MgtWG RefID #4722)
+#    1: 14.0625 Gbps
+#    2: 25.78125 Gbps
+#    3: 14.0625 Gbps or 25.78125 Gbps
+#    30: Disable extended link speeds
+#    Default 31: set to PortInfo:LinkSpeedExtSupported
+force_link_speed_ext 31
+
+# FDR10 on ports on devices that support FDR10
+# Values are:
+#    0: don't use fdr10 (no MLNX ExtendedPortInfo MADs)
+#    Default 1: enable fdr10 when supported
+#    2: disable fdr10 when supported
+fdr10 1
+
+# The subnet_timeout code that will be set for all the ports
+# The actual timeout is 4.096usec * 2^<subnet_timeout>
+subnet_timeout 18
+
+# Threshold of local phy errors for sending Trap 129
+local_phy_errors_threshold 0x08
+
+# Threshold of credit overrun errors for sending Trap 130
+overrun_errors_threshold 0x08
+
+# Use SwitchInfo:MulticastFDBTop if advertised in PortInfo:CapabilityMask
+use_mfttop TRUE
+
+#
+# PARTITIONING OPTIONS
+#
+# Partition configuration file to be used
+partition_config_file /etc/rdma/partitions.conf
+
+# Disable partition enforcement by switches
+no_partition_enforcement FALSE
+
+#
+# SWEEP OPTIONS
+#
+# The number of seconds between subnet sweeps (0 disables it)
+sweep_interval 10
+
+# If TRUE cause all lids to be reassigned
+reassign_lids FALSE
+
+# If TRUE forces every sweep to be a heavy sweep
+force_heavy_sweep FALSE
+
+# If TRUE every trap will cause a heavy sweep.
+# NOTE: successive identical traps (>10) are suppressed
+sweep_on_trap TRUE
+
+#
+# ROUTING OPTIONS
+#
+# If TRUE count switches as link subscriptions
+port_profile_switch_nodes FALSE
+
+# Name of file with port guids to be ignored by port profiling
+port_prof_ignore_file (null)
+
+# The file holding routing weighting factors per output port
+hop_weights_file (null)
+
+# The file holding non-default port order per switch for routing
+port_search_ordering_file (null)
+
+# Routing engine
+# Multiple routing engines can be specified separated by
+# commas so that specific ordering of routing algorithms will
+# be tried if earlier routing engines fail.
+# Supported engines: minhop, updn, dnup, file, ftree, lash,
+#    dor, torus-2QoS
+routing_engine (null)
+
+# Connect roots (use FALSE if unsure)
+connect_roots FALSE
+
+# Use unicast routing cache (use FALSE if unsure)
+use_ucast_cache FALSE
+
+# Lid matrix dump file name
+lid_matrix_dump_file (null)
+
+# LFTs file name
+lfts_file (null)
+
+# The file holding the root node guids (for fat-tree or Up/Down)
+# One guid in each line
+root_guid_file (null)
+
+# The file holding the fat-tree compute node guids
+# One guid in each line
+cn_guid_file (null)
+
+# The file holding the fat-tree I/O node guids
+# One guid in each line
+io_guid_file (null)
+
+# Number of reverse hops allowed for I/O nodes 
+# Used for connectivity between I/O nodes connected to Top Switches
+max_reverse_hops 0
+
+# The file holding the node ids which will be used by Up/Down algorithm instead
+# of GUIDs (one guid and id in each line)
+ids_guid_file (null)
+
+# The file holding guid routing order guids (for MinHop and Up/Down)
+guid_routing_order_file (null)
+
+# Do mesh topology analysis (for LASH algorithm)
+do_mesh_analysis FALSE
+
+# Starting VL for LASH algorithm
+lash_start_vl 0
+
+# Port Shifting (use FALSE if unsure)
+port_shifting FALSE
+
+# Assign ports in a random order instead of round-robin.
+# If zero disable, otherwise use the value as a random seed
+scatter_ports 0
+
+# SA database file name
+sa_db_file (null)
+
+# If TRUE causes OpenSM to dump SA database at the end of
+# every light sweep, regardless of the verbosity level
+sa_db_dump FALSE
+
+# Torus-2QoS configuration file name
+torus_config /etc/rdma/torus-2QoS.conf
+
+#
+# HANDOVER - MULTIPLE SMs OPTIONS
+#
+# SM priority used for deciding who is the master
+# Range goes from 0 (lowest priority) to 15 (highest).
+sm_priority 0
+
+# If TRUE other SMs on the subnet should be ignored
+ignore_other_sm FALSE
+
+# Timeout in [msec] between two polls of active master SM
+sminfo_polling_timeout 10000
+
+# Number of failing polls of remote SM that declares it dead
+polling_retry_number 4
+
+# If TRUE honor the guid2lid file when coming out of standby
+# state, if such file exists and is valid
+honor_guid2lid_file FALSE
+
+#
+# TIMING AND THREADING OPTIONS
+#
+# Maximum number of SMPs sent in parallel
+max_wire_smps 4
+
+# Maximum number of timeout based SMPs allowed to be outstanding
+# A value less than or equal to max_wire_smps disables this mechanism
+max_wire_smps2 4
+
+# The timeout in [usec] used for sending SMPs above max_wire_smps limit and below max_wire_smps2 limit
+max_smps_timeout 600000
+
+# The maximum time in [msec] allowed for a transaction to complete
+transaction_timeout 200
+
+# The maximum number of retries allowed for a transaction to complete
+transaction_retries 3
+
+# Maximal time in [msec] a message can stay in the incoming message queue.
+# If there is more than one message in the queue and the last message
+# stayed in the queue more than this value, any SA request will be
+# immediately be dropped but BUSY status is not currently returned.
+max_msg_fifo_timeout 10000
+
+# Use a single thread for handling SA queries
+single_thread FALSE
+
+#
+# MISC OPTIONS
+#
+# Daemon mode
+daemon FALSE
+
+# SM Inactive
+sm_inactive FALSE
+
+# Babbling Port Policy
+babbling_port_policy FALSE
+
+# Use Optimized SLtoVLMapping programming if supported by device
+use_optimized_slvl FALSE
+
+#
+# Performance Manager Options
+#
+# perfmgr enable
+perfmgr FALSE
+
+# perfmgr redirection enable
+perfmgr_redir TRUE
+
+# sweep time in seconds
+perfmgr_sweep_time_s 180
+
+# Max outstanding queries
+perfmgr_max_outstanding_queries 500
+
+#
+# Event DB Options
+#
+# Dump file to dump the events to
+event_db_dump_file (null)
+
+#
+# Event Plugin Options
+#
+# Event plugin name(s)
+event_plugin_name (null)
+
+# Options string that would be passed to the plugin(s)
+event_plugin_options (null)
+
+#
+# Node name map for mapping node's to more descriptive node descriptions
+# (man ibnetdiscover for more information)
+#
+node_name_map_name (null)
+
+#
+# DEBUG FEATURES
+#
+# The log flags used
+log_flags 0x03
+
+# Force flush of the log file after each log message
+force_log_flush FALSE
+
+# Log file to be used
+log_file /var/log/opensm.log
+
+# Limit the size of the log file in MB. If overrun, log is restarted
+log_max_size 0
+
+# If TRUE will accumulate the log over multiple OpenSM sessions
+accum_log_file TRUE
+
+# The directory to hold the file OpenSM dumps
+dump_files_dir /var/log/
+
+# If TRUE enables new high risk options and hardware specific quirks
+enable_quirks FALSE
+
+# If TRUE disables client reregistration
+no_clients_rereg FALSE
+
+# If TRUE OpenSM should disable multicast support and
+# no multicast routing is performed if TRUE
+disable_multicast FALSE
+
+# If TRUE opensm will exit on fatal initialization issues
+exit_on_fatal TRUE
+
+# console [off|local]
+console off
+
+# Telnet port for console (default 10000)
+console_port 10000
+
+#
+# QoS OPTIONS
+#
+# Enable QoS setup
+qos FALSE
+
+# QoS policy file to be used
+qos_policy_file /etc/rdma/qos-policy.conf
+
+# QoS default options
+qos_max_vls 0
+qos_high_limit -1
+qos_vlarb_high (null)
+qos_vlarb_low (null)
+qos_sl2vl (null)
+
+# QoS CA options
+qos_ca_max_vls 0
+qos_ca_high_limit -1
+qos_ca_vlarb_high (null)
+qos_ca_vlarb_low (null)
+qos_ca_sl2vl (null)
+
+# QoS Switch Port 0 options
+qos_sw0_max_vls 0
+qos_sw0_high_limit -1
+qos_sw0_vlarb_high (null)
+qos_sw0_vlarb_low (null)
+qos_sw0_sl2vl (null)
+
+# QoS Switch external ports options
+qos_swe_max_vls 0
+qos_swe_high_limit -1
+qos_swe_vlarb_high (null)
+qos_swe_vlarb_low (null)
+qos_swe_sl2vl (null)
+
+# QoS Router ports options
+qos_rtr_max_vls 0
+qos_rtr_high_limit -1
+qos_rtr_vlarb_high (null)
+qos_rtr_vlarb_low (null)
+qos_rtr_sl2vl (null)
+
+# Prefix routes file name
+prefix_routes_file /etc/rdma/prefix-routes.conf
+
+#
+# IPv6 Solicited Node Multicast (SNM) Options
+#
+consolidate_ipv6_snm_req FALSE
+
+# Log prefix
+log_prefix (null)
+

opensm-3.3.15.conf

@@ -0,0 +1,540 @@
+#
+# DEVICE ATTRIBUTES OPTIONS
+#
+# The port GUID on which the OpenSM is running
+guid 0x0000000000000000
+
+# M_Key value sent to all ports qualifying all Set(PortInfo)
+m_key 0x0000000000000000
+
+# The lease period used for the M_Key on this subnet in [sec]
+m_key_lease_period 0
+
+# The protection level used for the M_Key on this subnet
+m_key_protection_level 0
+
+# SM_Key value of the SM used for SM authentication
+sm_key 0x0000000000000001
+
+# SM_Key value to qualify rcv SA queries as 'trusted'
+sa_key 0x0000000000000001
+
+# Note that for both values above (sm_key and sa_key)
+# OpenSM version 3.2.1 and below used the default value '1'
+# in a host byte order, it is fixed now but you may need to
+# change the values to interoperate with old OpenSM running
+# on a little endian machine.
+
+# Subnet prefix used on this subnet
+subnet_prefix 0xfe80000000000000
+
+# The LMC value used on this subnet
+lmc 0
+
+# lmc_esp0 determines whether LMC value used on subnet is used for
+# enhanced switch port 0. If TRUE, LMC value for subnet is used for
+# ESP0. Otherwise, LMC value for ESP0s is 0.
+lmc_esp0 FALSE
+
+# sm_sl determines SMSL used for SM/SA communication
+sm_sl 0
+
+# The code of maximal time a packet can live in a switch
+# The actual time is 4.096usec * 2^<packet_life_time>
+# The value 0x14 disables this mechanism
+packet_life_time 0x12
+
+# The number of sequential packets dropped that cause the port
+# to enter the VLStalled state. The result of setting this value to
+# zero is undefined.
+vl_stall_count 0x07
+
+# The number of sequential packets dropped that cause the port
+# to enter the VLStalled state. This value is for switch ports
+# driving a CA or router port. The result of setting this value
+# to zero is undefined.
+leaf_vl_stall_count 0x07
+
+# The code of maximal time a packet can wait at the head of
+# transmission queue.
+# The actual time is 4.096usec * 2^<head_of_queue_lifetime>
+# The value 0x14 disables this mechanism
+head_of_queue_lifetime 0x12
+
+# The maximal time a packet can wait at the head of queue on
+# switch port connected to a CA or router port
+leaf_head_of_queue_lifetime 0x10
+
+# Limit the maximal operational VLs
+max_op_vls 5
+
+# Force PortInfo:LinkSpeedEnabled on switch ports
+# If 0, don't modify PortInfo:LinkSpeedEnabled on switch port
+# Otherwise, use value for PortInfo:LinkSpeedEnabled on switch port
+# Values are (IB Spec 1.2.1, 14.2.5.6 Table 146 "PortInfo")
+#    1: 2.5 Gbps
+#    3: 2.5 or 5.0 Gbps
+#    5: 2.5 or 10.0 Gbps
+#    7: 2.5 or 5.0 or 10.0 Gbps
+#    2,4,6,8-14 Reserved
+#    Default 15: set to PortInfo:LinkSpeedSupported
+force_link_speed 15
+
+# Force PortInfo:LinkSpeedExtEnabled on ports
+# If 0, don't modify PortInfo:LinkSpeedExtEnabled on port
+# Otherwise, use value for PortInfo:LinkSpeedExtEnabled on port
+# Values are (MgtWG RefID #4722)
+#    1: 14.0625 Gbps
+#    2: 25.78125 Gbps
+#    3: 14.0625 Gbps or 25.78125 Gbps
+#    30: Disable extended link speeds
+#    Default 31: set to PortInfo:LinkSpeedExtSupported
+force_link_speed_ext 31
+
+# FDR10 on ports on devices that support FDR10
+# Values are:
+#    0: don't use fdr10 (no MLNX ExtendedPortInfo MADs)
+#    Default 1: enable fdr10 when supported
+#    2: disable fdr10 when supported
+fdr10 1
+
+# The subnet_timeout code that will be set for all the ports
+# The actual timeout is 4.096usec * 2^<subnet_timeout>
+subnet_timeout 18
+
+# Threshold of local phy errors for sending Trap 129
+local_phy_errors_threshold 0x08
+
+# Threshold of credit overrun errors for sending Trap 130
+overrun_errors_threshold 0x08
+
+# Use SwitchInfo:MulticastFDBTop if advertised in PortInfo:CapabilityMask
+use_mfttop TRUE
+
+#
+# PARTITIONING OPTIONS
+#
+# Partition configuration file to be used
+partition_config_file /etc/rdma/partitions.conf
+
+# Disable partition enforcement by switches (DEPRECATED)
+# This option is DEPRECATED. Please use part_enforce instead
+no_partition_enforcement FALSE
+
+# Partition enforcement type (for switches)
+# Values are both, out, in and off
+# Default is both (outbound and inbound enforcement)
+part_enforce both
+
+# Allow both full and limited membership on the same partition
+allow_both_pkeys FALSE
+
+# SM assigned GUID byte where GUID is formed from OpenFabrics OUI
+# followed by 40 bits xy 00 ab cd ef where xy is the SM assigned GUID byte
+# and ab cd ef is an SM autogenerated 24 bits
+# SM assigned GUID byte should be configured as subnet unique
+sm_assigned_guid 0x00
+
+#
+# SWEEP OPTIONS
+#
+# The number of seconds between subnet sweeps (0 disables it)
+sweep_interval 10
+
+# If TRUE cause all lids to be reassigned
+reassign_lids FALSE
+
+# If TRUE forces every sweep to be a heavy sweep
+force_heavy_sweep FALSE
+
+# If TRUE every trap will cause a heavy sweep.
+# NOTE: successive identical traps (>10) are suppressed
+sweep_on_trap TRUE
+
+#
+# ROUTING OPTIONS
+#
+# If TRUE count switches as link subscriptions
+port_profile_switch_nodes FALSE
+
+# Name of file with port guids to be ignored by port profiling
+port_prof_ignore_file (null)
+
+# The file holding routing weighting factors per output port
+hop_weights_file (null)
+
+# The file holding non-default port order per switch for routing
+port_search_ordering_file (null)
+
+# Routing engine
+# Multiple routing engines can be specified separated by
+# commas so that specific ordering of routing algorithms will
+# be tried if earlier routing engines fail.
+# Supported engines: minhop, updn, dnup, file, ftree, lash,
+#    dor, torus-2QoS, dfsssp, sssp
+routing_engine (null)
+
+# Connect roots (use FALSE if unsure)
+connect_roots FALSE
+
+# Use unicast routing cache (use FALSE if unsure)
+use_ucast_cache FALSE
+
+# Lid matrix dump file name
+lid_matrix_dump_file (null)
+
+# LFTs file name
+lfts_file (null)
+
+# The file holding the root node guids (for fat-tree or Up/Down)
+# One guid in each line
+root_guid_file (null)
+
+# The file holding the fat-tree compute node guids
+# One guid in each line
+cn_guid_file (null)
+
+# The file holding the fat-tree I/O node guids
+# One guid in each line
+io_guid_file (null)
+
+# Number of reverse hops allowed for I/O nodes 
+# Used for connectivity between I/O nodes connected to Top Switches
+max_reverse_hops 0
+
+# The file holding the node ids which will be used by Up/Down algorithm instead
+# of GUIDs (one guid and id in each line)
+ids_guid_file (null)
+
+# The file holding guid routing order guids (for MinHop and Up/Down)
+guid_routing_order_file (null)
+
+# Do mesh topology analysis (for LASH algorithm)
+do_mesh_analysis FALSE
+
+# Starting VL for LASH algorithm
+lash_start_vl 0
+
+# Port Shifting (use FALSE if unsure)
+port_shifting FALSE
+
+# Assign ports in a random order instead of round-robin.
+# If zero disable, otherwise use the value as a random seed
+scatter_ports 0
+
+# SA database file name
+sa_db_file (null)
+
+# If TRUE causes OpenSM to dump SA database at the end of
+# every light sweep, regardless of the verbosity level
+sa_db_dump FALSE
+
+# Torus-2QoS configuration file name
+torus_config /etc/rdma/torus-2QoS.conf
+
+#
+# HANDOVER - MULTIPLE SMs OPTIONS
+#
+# SM priority used for deciding who is the master
+# Range goes from 0 (lowest priority) to 15 (highest).
+sm_priority 0
+
+# If TRUE other SMs on the subnet should be ignored
+ignore_other_sm FALSE
+
+# Timeout in [msec] between two polls of active master SM
+sminfo_polling_timeout 10000
+
+# Number of failing polls of remote SM that declares it dead
+polling_retry_number 4
+
+# If TRUE honor the guid2lid file when coming out of standby
+# state, if such file exists and is valid
+honor_guid2lid_file FALSE
+
+#
+# TIMING AND THREADING OPTIONS
+#
+# Maximum number of SMPs sent in parallel
+max_wire_smps 4
+
+# Maximum number of timeout based SMPs allowed to be outstanding
+# A value less than or equal to max_wire_smps disables this mechanism
+max_wire_smps2 4
+
+# The timeout in [usec] used for sending SMPs above max_wire_smps limit and below max_wire_smps2 limit
+max_smps_timeout 600000
+
+# The maximum time in [msec] allowed for a transaction to complete
+transaction_timeout 200
+
+# The maximum number of retries allowed for a transaction to complete
+transaction_retries 3
+
+# Maximal time in [msec] a message can stay in the incoming message queue.
+# If there is more than one message in the queue and the last message
+# stayed in the queue more than this value, any SA request will be
+# immediately be dropped but BUSY status is not currently returned.
+max_msg_fifo_timeout 10000
+
+# Use a single thread for handling SA queries
+single_thread FALSE
+
+#
+# MISC OPTIONS
+#
+# Daemon mode
+daemon FALSE
+
+# SM Inactive
+sm_inactive FALSE
+
+# Babbling Port Policy
+babbling_port_policy FALSE
+
+# Use Optimized SLtoVLMapping programming if supported by device
+use_optimized_slvl FALSE
+
+#
+# Performance Manager Options
+#
+# perfmgr enable
+perfmgr FALSE
+
+# perfmgr redirection enable
+perfmgr_redir TRUE
+
+# sweep time in seconds
+perfmgr_sweep_time_s 180
+
+# Max outstanding queries
+perfmgr_max_outstanding_queries 500
+perfmgr_ignore_cas FALSE
+
+# Remove missing nodes from DB
+perfmgr_rm_nodes TRUE
+
+# Log error counters to opensm.log
+perfmgr_log_errors TRUE
+
+#
+# Event DB Options
+#
+# Dump file to dump the events to
+event_db_dump_file (null)
+
+#
+# Event Plugin Options
+#
+# Event plugin name(s)
+event_plugin_name (null)
+
+# Options string that would be passed to the plugin(s)
+event_plugin_options (null)
+
+#
+# Node name map for mapping node's to more descriptive node descriptions
+# (man ibnetdiscover for more information)
+#
+node_name_map_name (null)
+
+#
+# DEBUG FEATURES
+#
+# The log flags used
+log_flags 0x03
+
+# Force flush of the log file after each log message
+force_log_flush FALSE
+
+# Log file to be used
+log_file /var/log/opensm.log
+
+# Limit the size of the log file in MB. If overrun, log is restarted
+log_max_size 0
+
+# If TRUE will accumulate the log over multiple OpenSM sessions
+accum_log_file TRUE
+
+# Per module logging configuration file
+# Each line in config file contains <module_name><separator><log_flags>
+# where module_name is file name including .c
+# separator is either = , space, or tab
+# log_flags is the same flags as used in the coarse/overall logging
+per_module_logging_file /etc/rdma/per-module-logging.conf
+
+# The directory to hold the file OpenSM dumps
+dump_files_dir /var/log/
+
+# If TRUE enables new high risk options and hardware specific quirks
+enable_quirks FALSE
+
+# If TRUE disables client reregistration
+no_clients_rereg FALSE
+
+# If TRUE OpenSM should disable multicast support and
+# no multicast routing is performed if TRUE
+disable_multicast FALSE
+
+# If TRUE opensm will exit on fatal initialization issues
+exit_on_fatal TRUE
+
+# console [off|local]
+console off
+
+# Telnet port for console (default 10000)
+console_port 10000
+
+#
+# QoS OPTIONS
+#
+# Enable QoS setup
+qos FALSE
+
+# QoS policy file to be used
+qos_policy_file /etc/rdma/qos-policy.conf
+
+# QoS default options
+qos_max_vls 0
+qos_high_limit -1
+qos_vlarb_high (null)
+qos_vlarb_low (null)
+qos_sl2vl (null)
+
+# QoS CA options
+qos_ca_max_vls 0
+qos_ca_high_limit -1
+qos_ca_vlarb_high (null)
+qos_ca_vlarb_low (null)
+qos_ca_sl2vl (null)
+
+# QoS Switch Port 0 options
+qos_sw0_max_vls 0
+qos_sw0_high_limit -1
+qos_sw0_vlarb_high (null)
+qos_sw0_vlarb_low (null)
+qos_sw0_sl2vl (null)
+
+# QoS Switch external ports options
+qos_swe_max_vls 0
+qos_swe_high_limit -1
+qos_swe_vlarb_high (null)
+qos_swe_vlarb_low (null)
+qos_swe_sl2vl (null)
+
+# QoS Router ports options
+qos_rtr_max_vls 0
+qos_rtr_high_limit -1
+qos_rtr_vlarb_high (null)
+qos_rtr_vlarb_low (null)
+qos_rtr_sl2vl (null)
+
+#
+# Congestion Control OPTIONS (EXPERIMENTAL)
+#
+
+# Enable Congestion Control Configuration
+congestion_control FALSE
+
+# CCKey to use when configuring congestion control
+# note that this does not configure a new CCkey, only the CCkey to use
+cc_key 0x0000000000000000
+
+# Congestion Control Max outstanding MAD
+cc_max_outstanding_mads 500
+
+#
+# Congestion Control SwitchCongestionSetting options
+#
+# Control Map - bitmask indicating which of the following attributes are to be used
+# bit 0 - victim mask
+# bit 1 - credit mask
+# bit 2 - threshold + packet size
+# bit 3 - credit starvation threshold + return delay valid
+# bit 4 - marking rate valid
+cc_sw_cong_setting_control_map 0x0
+
+# Victim Mask - 256 bit mask representing switch ports, mark packets with FECN
+# whether they are the source or victim of congestion
+# bit 0 - port 0 (enhanced port)
+# bit 1 - port 1
+# ...
+# bit 254 - port 254
+# bit 255 - reserved
+cc_sw_cong_setting_victim_mask 0x0000000000000000000000000000000000000000000000000000000000000000
+
+# Credit Mask - 256 bit mask representing switch ports to apply credit starvation
+# bit 0 - port 0 (enhanced port)
+# bit 1 - port 1
+# ...
+# bit 254 - port 254
+# bit 255 - reserved
+cc_sw_cong_setting_credit_mask 0x0000000000000000000000000000000000000000000000000000000000000000
+
+# Threshold - value indicating aggressiveness of congestion marking
+# 0x0 - none, 0x1 - loose, ..., 0xF - aggressive
+cc_sw_cong_setting_threshold 0x00
+
+# Packet Size - any packet less than this size will not be marked with a FECN
+# units are in credits
+cc_sw_cong_setting_packet_size 0
+
+# Credit Starvation Threshold - value indicating aggressiveness of credit starvation
+# 0x0 - none, 0x1 - loose, ..., 0xF - aggressive
+cc_sw_cong_setting_credit_starvation_threshold 0x00
+
+# Credit Starvation Return Delay - in CCT entry shift:multiplier format, see IB spec
+cc_sw_cong_setting_credit_starvation_return_delay 0:0
+
+# Marking Rate - mean number of packets between markings
+cc_sw_cong_setting_marking_rate 0
+
+#
+# Congestion Control CA Congestion Setting options
+#
+# Port Control
+# bit 0 = 0, QP based congestion control
+# bit 0 = 1, SL/port based congestion control
+cc_ca_cong_setting_port_control 0x0000
+
+# Control Map - 16 bit bitmask indicating which SLs should be configured
+cc_ca_cong_setting_control_map 0x0000
+
+#
+# CA Congestion Setting Entries
+#
+# Each of congestion control settings below configures the CA Congestion
+# Settings for an individual SL.  The SL must be specified before the value.
+# These options may be specified multiple times to configure different values
+# for different SLs.
+#
+# ccti timer - when expires decrements 1 from the CCTI
+# ccti increase - number to be added to the table index on receipt of a BECN
+# trigger threshold - when the ccti is equal to this, an event is logged
+# ccti min - the minimum value for the ccti.  This imposes a minimum rate
+#            on the injection rate
+
+# SL = 0
+cc_ca_cong_setting_ccti_timer 0 0
+cc_ca_cong_setting_ccti_increase 0 0
+cc_ca_cong_setting_trigger_threshold 0 0
+cc_ca_cong_setting_ccti_min 0 0
+
+#
+# Congestion Control Table
+#
+# Comma separated list of CCT entries representing CCT.
+# Format is shift:multipler,shift_multiplier,shift:multiplier,...
+cc_cct (null)
+
+# Prefix routes file name
+prefix_routes_file /etc/rdma/prefix-routes.conf
+
+#
+# IPv6 Solicited Node Multicast (SNM) Options
+#
+consolidate_ipv6_snm_req FALSE
+
+# Log prefix
+log_prefix (null)
+

opensm.launch

@@ -0,0 +1,42 @@
+#!/bin/bash
+#
+# Launch the necessary OpenSM daemons for systemd
+#
+# sysconfig: /etc/sysconfig/opensm
+# config: /etc/rdma/opensm.conf
+#
+
+prog=/usr/sbin/opensm
+[ -f /etc/sysconfig/opensm ] && . /etc/sysconfig/opensm
+
+[ -n "$PRIORITY" ] && prio="-p $PRIORITY"
+
+if [ -z "$GUIDS" ]; then
+	CONFIGS=""
+	CONFIG_CNT=0
+	for conf in /etc/rdma/opensm.conf.[0-9]*; do
+		CONFIGS="$CONFIGS $conf"
+		let CONFIG_CNT++
+	done
+else
+	GUID_CNT=0
+	for guid in $GUIDS; do
+		let GUID_CNT++
+	done
+fi
+# Start opensm
+if [ -n "$GUIDS" ]; then
+	SUBNET_COUNT=0
+	for guid in $GUIDS; do
+		SUBNET_PREFIX=`printf "0xfe800000000000%02d" $SUBNET_COUNT`
+		$prog -B $prio -g $guid --subnet_prefix $SUBNET_PREFIX
+		let SUBNET_COUNT++
+	done
+elif [ -n "$CONFIGS" ]; then
+	for config in $CONFIGS; do
+		$prog -B $prio -F $config
+	done
+else
+	$prog -B $prio
+fi
+exit 0

opensm.service

@@ -0,0 +1,14 @@
+[Unit]
+Description=Starts the OpenSM InfiniBand fabric Subnet Manager
+Documentation=man:opensm
+DefaultDependencies=false
+Before=network.target remote-fs-pre.target
+Requires=rdma.service
+After=rdma.service
+
+[Service]
+Type=forking
+ExecStart=/usr/libexec/opensm-launch
+
+[Install]
+WantedBy=network.target

opensm.spec

@@ -1,6 +1,6 @@
 Name: opensm
-Version: 3.3.13
+Version: 3.3.15
-Release: 3%{?dist}
+Release: 1%{?dist}
 Summary: OpenIB InfiniBand Subnet Manager and management utilities
 Group: System Environment/Daemons
 License: GPLv2 or BSD
@@ -10,9 +10,11 @@ Source1: opensm.conf
 Source2: opensm.logrotate
 Source3: opensm.initd
 Source4: opensm.sysconfig
+Source5: opensm.service
+Source6: opensm.launch
 Patch0: opensm-3.3.13-prefix.patch
 BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
-BuildRequires: libibmad-devel = 1.3.8, libtool, bison, flex, byacc
+BuildRequires: libibmad-devel = 1.3.9, libtool, bison, flex, byacc, systemd
 Requires: %{name}-libs = %{version}-%{release}, logrotate, rdma
 ExcludeArch: s390 s390x
 
@@ -24,6 +26,17 @@ also contains various tools for diagnosing and testing Infiniband networks
 that can be used from any machine and do not need to be run on a machine
 running the opensm daemon.
 
+%package sysv
+Summary: Old back compatible SysV init script
+Group: System Environment/Daemons
+Requires(post): chkconfig, service
+Requires(preun): chkconfig, service
+
+%description sysv
+OpenSM has been updated to use the new systemd daemon management
+architecture.  The old SysV init script has been saved off in this
+sub package so users that require it can still have it.
+
 %package libs
 Summary: Libraries used by opensm and included utilities
 Group: System Environment/Libraries
@@ -66,19 +79,21 @@ install -D -m644 %{SOURCE1} %{buildroot}%{_sysconfdir}/rdma/opensm.conf
 install -D -m644 %{SOURCE2} %{buildroot}%{_sysconfdir}/logrotate.d/opensm
 install -D -m755 %{SOURCE3} %{buildroot}%{_initddir}/opensm
 install -D -m644 %{SOURCE4} %{buildroot}%{_sysconfdir}/sysconfig/opensm
+install -D -m644 %{SOURCE5} %{buildroot}%{_unitdir}/opensm.service
+install -D -m755 %{SOURCE6} %{buildroot}%{_libexecdir}/opensm-launch
 mkdir -p ${RPM_BUILD_ROOT}/var/cache/opensm
 
 %clean
 rm -rf %{buildroot}
 
-%post
+%post sysv
 if [ $1 = 1 ]; then
 	/sbin/chkconfig --add opensm
 else
 	/sbin/service opensm condrestart
 fi
 
-%preun
+%preun sysv
 if [ $1 = 0 ]; then
 	/sbin/service opensm stop
 	/sbin/chkconfig --del opensm
@@ -93,13 +108,18 @@ fi
 %defattr(-,root,root,-)
 %dir /var/cache/opensm
 %{_sbindir}/*
-%{_initddir}/opensm
 %{_mandir}/*
+%{_unitdir}/*
+%{_libexecdir}/*
 %config(noreplace) %{_sysconfdir}/logrotate.d/opensm
 %config(noreplace) %{_sysconfdir}/rdma/opensm.conf
 %config(noreplace) %{_sysconfdir}/sysconfig/opensm
 %doc AUTHORS COPYING ChangeLog INSTALL README NEWS
 
+%files sysv
+%defattr(-,root,root,-)
+%{_initddir}/opensm
+
 %files libs
 %defattr(-,root,root,-)
 %{_libdir}/lib*.so.*
@@ -114,6 +134,10 @@ fi
 %{_libdir}/lib*.a
 
 %changelog
+* Tue Nov 27 2012 Doug Ledford <dledford@redhat.com> - 3.3.15-1
+- Update to latest upstream release
+- Update to systemd startup
+
 * Fri Jul 20 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 3.3.13-3
 - Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
 

sources

@@ -1 +1 @@
-6e667badb126a5e21ea2ab90cd950226  opensm-3.3.13.tar.gz
+ad4c179c119bbb78be740e33b59746ad  opensm-3.3.15.tar.gz