RHEL 9.0.0 Alpha bootstrap

The content of this branch was automatically imported from Fedora ELN with the following as its source: https://src.fedoraproject.org/rpms/mariadb#4e960545a8a5fc83de7c79818a01beeb08c51d6b
2020-10-15 18:57:59 +02:00 · 2020-10-15 18:57:59 +02:00 · 6df48a42f2
commit 6df48a42f2
parent 33aafbe94e
35 changed files with 4955 additions and 0 deletions
--- a/.gitignore
+++ b/.gitignore
@ -0,0 +1,3 @@
+/*/
+/*.rpm
+/*.tar.gz
--- a/LICENSE.clustercheck
+++ b/LICENSE.clustercheck
@ -0,0 +1,27 @@
+Copyright (c) 2012-2014, Olaf van Zandwijk
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice,
+   this list of conditions and the following disclaimer.
+
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution.
+
+3. Neither the name of the copyright holder nor the names of its contributors
+   may be used to endorse or promote products derived from this software without
+   specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
--- a/README.mysql-cnf
+++ b/README.mysql-cnf
@ -0,0 +1,13 @@
+This directory contains prepared configuration files with .cnf extension,
+which provide a configuration for some common MariaDB deployment scenarios.
+These configuration files do not include the default configuration of datadir,
+log-file and pid-file locations, as specified in the default my.cnf file,
+provided in this distribution.
+
+Thus, it is recommended to use these configuration files as an addition to the
+default my.cnf configuration file.
+
+Since default my.cnf contains `!includedir @INSTALL_SYSCONF2DIR@` directive, it is
+recommended to copy required configuration under @INSTALL_SYSCONF2DIR@ directory,
+so the default my.cnf specifications will be extended.
+
--- a/README.mysql-docs
+++ b/README.mysql-docs
@ -0,0 +1,4 @@
+The official MySQL documentation is not freely redistributable, so we cannot
+include it in RHEL or Fedora.  You can find it on-line at
+
+http://dev.mysql.com/doc/
--- a/README.mysql-license
+++ b/README.mysql-license
@ -0,0 +1,9 @@
+MySQL is distributed under GPL v2, but there are some licensing exceptions
+that allow the client libraries to be linked with a non-GPL application,
+so long as the application is under a license approved by Oracle.
+For details see
+
+http://www.mysql.com/about/legal/licensing/foss-exception/
+
+Some innobase code from Percona and Google is under BSD license.
+Some code related to test-suite is under LGPLv2.
--- a/clustercheck.sh
+++ b/clustercheck.sh
@ -0,0 +1,89 @@
+#!/bin/bash
+#
+# Script to make a proxy (ie HAProxy) capable of monitoring Galera cluster nodes properly
+#
+# Author: Olaf van Zandwijk <olaf.vanzandwijk@nedap.com>
+# Author: Raghavendra Prabhu <raghavendra.prabhu@percona.com>
+# Author: Ryan O'Hara <rohara@redhat.com>
+#
+# Documentation and download: https://github.com/olafz/percona-clustercheck
+#
+# Based on the original script from Unai Rodriguez
+#
+
+if [ -f @INSTALL_SYSCONFDIR@/sysconfig/clustercheck ]; then
+    . @INSTALL_SYSCONFDIR@/sysconfig/clustercheck
+fi
+
+MYSQL_USERNAME="${MYSQL_USERNAME-clustercheckuser}"
+MYSQL_PASSWORD="${MYSQL_PASSWORD-clustercheckpassword!}"
+MYSQL_HOST="${MYSQL_HOST:-127.0.0.1}"
+MYSQL_PORT="${MYSQL_PORT:-3306}"
+ERR_FILE="${ERR_FILE:-/dev/null}"
+AVAILABLE_WHEN_DONOR=${AVAILABLE_WHEN_DONOR:-0}
+AVAILABLE_WHEN_READONLY=${AVAILABLE_WHEN_READONLY:-1}
+DEFAULTS_EXTRA_FILE=${DEFAULTS_EXTRA_FILE:-@INSTALL_SYSCONFDIR@/my.cnf}
+
+#Timeout exists for instances where mysqld may be hung
+TIMEOUT=10
+
+if [[ -r $DEFAULTS_EXTRA_FILE ]];then
+    MYSQL_CMDLINE="mysql --defaults-extra-file=$DEFAULTS_EXTRA_FILE -nNE \
+                    --connect-timeout=$TIMEOUT \
+                    --user=${MYSQL_USERNAME} --password=${MYSQL_PASSWORD} \
+                    --host=${MYSQL_HOST} --port=${MYSQL_PORT}"
+else
+    MYSQL_CMDLINE="mysql -nNE --connect-timeout=$TIMEOUT \
+                    --user=${MYSQL_USERNAME} --password=${MYSQL_PASSWORD} \
+                    --host=${MYSQL_HOST} --port=${MYSQL_PORT}"
+fi
+#
+# Perform the query to check the wsrep_local_state
+#
+WSREP_STATUS=$($MYSQL_CMDLINE -e "SHOW STATUS LIKE 'wsrep_local_state';" \
+    2>${ERR_FILE} | tail -1 2>>${ERR_FILE})
+
+if [[ "${WSREP_STATUS}" == "4" ]] || [[ "${WSREP_STATUS}" == "2" && ${AVAILABLE_WHEN_DONOR} == 1 ]]
+then
+    # Check only when set to 0 to avoid latency in response.
+    if [[ $AVAILABLE_WHEN_READONLY -eq 0 ]];then
+        READ_ONLY=$($MYSQL_CMDLINE -e "SHOW GLOBAL VARIABLES LIKE 'read_only';" \
+                    2>${ERR_FILE} | tail -1 2>>${ERR_FILE})
+
+        if [[ "${READ_ONLY}" == "ON" ]];then
+            # Galera cluster node local state is 'Synced', but it is in
+            # read-only mode. The variable AVAILABLE_WHEN_READONLY is set to 0.
+            # => return HTTP 503
+            # Shell return-code is 1
+            echo -en "HTTP/1.1 503 Service Unavailable\r\n"
+            echo -en "Content-Type: text/plain\r\n"
+            echo -en "Connection: close\r\n"
+            echo -en "Content-Length: 35\r\n"
+            echo -en "\r\n"
+            echo -en "Galera cluster node is read-only.\r\n"
+            sleep 0.1
+            exit 1
+        fi
+    fi
+    # Galera cluster node local state is 'Synced' => return HTTP 200
+    # Shell return-code is 0
+    echo -en "HTTP/1.1 200 OK\r\n"
+    echo -en "Content-Type: text/plain\r\n"
+    echo -en "Connection: close\r\n"
+    echo -en "Content-Length: 32\r\n"
+    echo -en "\r\n"
+    echo -en "Galera cluster node is synced.\r\n"
+    sleep 0.1
+    exit 0
+else
+    # Galera cluster node local state is not 'Synced' => return HTTP 503
+    # Shell return-code is 1
+    echo -en "HTTP/1.1 503 Service Unavailable\r\n"
+    echo -en "Content-Type: text/plain\r\n"
+    echo -en "Connection: close\r\n"
+    echo -en "Content-Length: 36\r\n"
+    echo -en "\r\n"
+    echo -en "Galera cluster node is not synced.\r\n"
+    sleep 0.1
+    exit 1
+fi
--- a/mariadb-auth_pam_tool_dir.patch
+++ b/mariadb-auth_pam_tool_dir.patch
@ -0,0 +1,29 @@
+This scirpt is ran by the systemd service.
+In Fedora the service has priviledges dropped to the mysql user.
+Thus "chown 0" will always fail
+
+Never parse 'ls' output!
+http://mywiki.wooledge.org/BashFAQ/087
+
+--- mariadb-10.4.12/scripts/mysql_install_db.sh	2020-01-26 21:43:53.000000000 +0100
+++ mariadb-10.4.12/scripts/mysql_install_db.sh_patched	2020-01-29 11:11:09.448812331 +0100
+@@ -482,13 +482,16 @@ if test -n "$user"
+ then
+   if test -z "$srcdir" -a "$in_rpm" -eq 0
+   then
+-    chown 0 "$pamtooldir/auth_pam_tool_dir/auth_pam_tool" && \
+-    chmod 04755 "$pamtooldir/auth_pam_tool_dir/auth_pam_tool"
+-    if test $? -ne 0
+    if [ `stat "$pamtooldir/auth_pam_tool_dir/auth_pam_tool" -c %u` -ne 0 ]
+     then
+      chown 0 "$pamtooldir/auth_pam_tool_dir/auth_pam_tool" && \
+      chmod 04755 "$pamtooldir/auth_pam_tool_dir/auth_pam_tool"
+      if test $? -ne 0
+      then
+         echo "Couldn't set an owner to '$pamtooldir/auth_pam_tool_dir/auth_pam_tool'."
+         echo "It must be root, the PAM authentication plugin doesn't work otherwise.."
+         echo
+      fi
+     fi
+     chown $user "$pamtooldir/auth_pam_tool_dir" && \
+     chmod 0700 "$pamtooldir/auth_pam_tool_dir"
--- a/mariadb-groonga.patch
+++ b/mariadb-groonga.patch
@ -0,0 +1,30 @@
+# Fixing conflict with groonga package
+# https://bugzilla.redhat.com/show_bug.cgi?id=1763287
+
+--- mariadb-10.3.18/storage/mroonga/vendor/groonga/CMakeLists.txt.withoutoption	2019-11-11 14:01:07.762595716 +0100
+++ mariadb-10.3.18/storage/mroonga/vendor/groonga/CMakeLists.txt	2019-11-11 14:33:05.224012458 +0100
+@@ -86,7 +86,9 @@
+ set(INCLUDE_DIR "include")
+ set(GRN_INCLUDE_DIR "include/groonga")
+ set(DATA_DIR "share")
+-set(GRN_DATA_DIR "${DATA_DIR}/${GRN_PROJECT_NAME}")
+if(NOT DEFINED GRN_DATA_DIR)
+    set(GRN_DATA_DIR "${DATA_DIR}/${GRN_PROJECT_NAME}")
+endif()
+ set(CONFIG_DIR "etc")
+ set(GRN_CONFIG_DIR "${CONFIG_DIR}/${GRN_PROJECT_NAME}")
+ set(GRN_CONFIG_PATH "${CMAKE_INSTALL_PREFIX}/${GRN_CONFIG_DIR}/groonga.conf")
+
+--- mariadb-10.3.18/storage/mroonga/vendor/groonga/vendor/plugins/groonga-normalizer-mysql/CMakeLists.txt.withoutoption	2019-11-11 14:34:22.661005715 +0100
+++ mariadb-10.3.18/storage/mroonga/vendor/groonga/vendor/plugins/groonga-normalizer-mysql/CMakeLists.txt	2019-11-11 14:35:59.962244120 +0100
+@@ -16,7 +16,9 @@
+ # MA 02110-1335  USA
+ 
+ cmake_minimum_required(VERSION 2.6)
+-set(GROONGA_NORMALIZER_MYSQL_PROJECT_NAME "groonga-normalizer-mysql")
+if (NOT DEFINED GROONGA_NORMALIZER_MYSQL_PROJECT_NAME)
+    set(GROONGA_NORMALIZER_MYSQL_PROJECT_NAME "groonga-normalizer-mysql")
+endif()
+ project("${GROONGA_NORMALIZER_MYSQL_PROJECT_NAME}")
+ 
+ if(DEFINED GROONGA_NORMALIZER_MYSQL_EMBED)
--- a/mariadb-logrotate.patch
+++ b/mariadb-logrotate.patch
@ -0,0 +1,73 @@
+Adjust the mysql-log-rotate script in several ways:
+
+* Use the correct log file pathname for Red Hat installations.
+* Enable creation of the log file by logrotate (needed since
+  /var/log/ isn't writable by mysql user); and set the same 640
+  permissions we normally use.
+* Comment out the actual rotation commands, so that user must edit
+  the file to enable rotation.  This is unfortunate, but the fact
+  that the script will probably fail without manual configuration
+  (to set a root password) means that we can't really have it turned
+  on by default.  Fortunately, in most configurations the log file
+  is low-volume and so rotation is not critical functionality.
+
+See discussions at RH bugs 799735, 547007
+* Note they are from Fedora 15 / 16
+
+Update 3/2017
+* it would be big unexpected change for anyone upgrading, if we start shipping it now.
+  Maybe it is good candidate for shipping with MariaDB 10.2 ?
+* the 'mysqladmin flush logs' doesn´t guarantee, no entries are lost
+  during flushing, the operation is not atomic.
+  We should not ship it in that state
+
+Update 6/2018
+* the SIGHUP causes server to flush all logs. No password admin needed, the only constraint is
+  beeing able to send the SIGHUP to the process and read the mysqld pid file, which root can.
+* Submited as PR: https://github.com/MariaDB/server/pull/807
+
+--- mariadb-10.3.19/support-files/mysql-log-rotate.sh	2019-11-03 17:03:27.000000000 +0100
+++ mariadb-10.3.19/support-files/mysql-log-rotate.sh_patched	2019-11-06 15:07:54.205379672 +0100
+@@ -3,23 +3,10 @@
+ # in the [mysqld] section as follows:
+ #
+ # [mysqld]
+-# log-error=@localstatedir@/mysqld.log
+-#
+-# If the root user has a password you have to create a
+-# /root/.my.cnf configuration file with the following
+-# content:
+-#
+-# [mysqladmin]
+-# password = <secret> 
+-# user= root
+-#
+-# where "<secret>" is the password. 
+-#
+-# ATTENTION: This /root/.my.cnf should be readable ONLY
+-# for root !
+# log-error=@LOG_LOCATION@
+ 
+-@localstatedir@/mysqld.log {
+-        # create 600 mysql mysql
+@LOG_LOCATION@ {
+        create 600 mysql mysql
+         notifempty
+         daily
+         rotate 3
+@@ -27,11 +14,9 @@
+         compress
+     postrotate
+ 	# just if mysqld is really running
+-	if test -x @bindir@/mysqladmin && \
+-	   @bindir@/mysqladmin ping &>/dev/null
+-	then
+-	   @bindir@/mysqladmin --local flush-error-log \
+-              flush-engine-log flush-general-log flush-slow-log
+-	fi
+        if [ -e @PID_FILE_DIR@/@DAEMON_NO_PREFIX@.pid ]
+        then
+           kill -1 $(<@PID_FILE_DIR@/@DAEMON_NO_PREFIX@.pid)
+        fi
+     endscript
+ }
--- a/mariadb-ownsetup.patch
+++ b/mariadb-ownsetup.patch
@ -0,0 +1,31 @@
+--- mariadb-10.4.14/support-files/CMakeLists.txt	2020-08-06 17:28:28.000000000 +0200
+++ mariadb-10.4.14/support-files/CMakeLists.txt_patched	2020-09-03 13:21:07.826658279 +0200
+@@ -187,6 +187,7 @@ IF(UNIX)
+               COMPONENT SharedLibraries)
+       INSTALL(FILES rpm/mysql-clients.cnf DESTINATION ${INSTALL_SYSCONF2DIR}
+               COMPONENT Client)
+      CONFIGURE_FILE(rpm/server.cnf ${CMAKE_CURRENT_SOURCE_DIR}/rpm/server.cnf @ONLY)
+       INSTALL(FILES rpm/server.cnf DESTINATION ${INSTALL_SYSCONF2DIR}
+               COMPONENT IniFiles)
+       INSTALL(FILES rpm/enable_encryption.preset DESTINATION ${INSTALL_SYSCONF2DIR}
+
+diff -up mariadb-10.0.15/support-files/rpm/server.cnf.ownsetup mariadb-10.0.15/support-files/rpm/server.cnf
+--- mariadb-10.0.15/support-files/rpm/server.cnf.ownsetup	2015-01-24 23:55:55.110063592 +0100
+++ mariadb-10.0.15/support-files/rpm/server.cnf	2015-01-24 23:57:42.308114387 +0100
+@@ -9,7 +9,16 @@
+ [server]
+ 
+ # this is only for the mysqld standalone daemon
+# Settings user and group are ignored when systemd is used.
+# If you need to run mysqld under a different user or group,
+# customize your systemd unit file for mysqld/mariadb according to the
+# instructions in http://fedoraproject.org/wiki/Systemd
+ [mysqld]
+datadir=@MYSQL_DATADIR@
+socket=@MYSQL_UNIX_ADDR@
+log-error=@LOG_LOCATION@
+pid-file=@PID_FILE_DIR@/@DAEMON_NO_PREFIX@.pid
+
+ 
+ #
+ # * Galera-related settings
--- a/mariadb-scripts.patch
+++ b/mariadb-scripts.patch
@ -0,0 +1,40 @@
+We have some downstream patches and other scripts that include variables to
+be expanded by cmake. Cmake needs to know about them, so adding them manually.
+
+--- mariadb-10.3.8/scripts/CMakeLists.txt	2018-07-02 09:34:11.000000000 +0200
+++ mariadb-10.3.8/scripts/CMakeLists.txt_patched	2018-07-03 10:58:15.954670153 +0200
+@@ -361,6 +361,34 @@ ELSE()
+       COMPONENT ${${file}_COMPONENT}
+      )
+   ENDFOREACH()
+
+  # files for systemd
+  SET(SYSTEMD_SCRIPTS
+    mysql.tmpfiles.d
+    mysql.service
+    mysql@.service
+    mysql-prepare-db-dir
+    mysql-check-socket
+    mysql-check-upgrade
+    mysql-scripts-common
+    mysql_config_multilib
+    clustercheck
+    galera_new_cluster
+    my.cnf
+  )
+  FOREACH(file ${SYSTEMD_SCRIPTS})
+    IF(EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/${file}.sh)
+      CONFIGURE_FILE(${CMAKE_CURRENT_SOURCE_DIR}/${file}.sh
+        ${CMAKE_CURRENT_BINARY_DIR}/${file} ESCAPE_QUOTES @ONLY)
+    ELSEIF(EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/${file}.in)
+      CONFIGURE_FILE(${CMAKE_CURRENT_SOURCE_DIR}/${file}.in
+        ${CMAKE_CURRENT_BINARY_DIR}/${file} ESCAPE_QUOTES @ONLY)
+    ELSE()
+      MESSAGE(FATAL_ERROR "Can not find ${file}.sh or ${file}.in in "
+        "${CMAKE_CURRENT_SOURCE_DIR}" )
+    ENDIF()
+  ENDFOREACH()
+
+ ENDIF()
+ 
+ # Install libgcc as  mylibgcc.a
--- a/mariadb-server-galera.te
+++ b/mariadb-server-galera.te
@ -0,0 +1,23 @@
+
+module mariadb-server-galera 1.0;
+
+require {
+    type mysqld_t;
+    type rsync_exec_t;
+    type anon_inodefs_t;
+    type proc_net_t;
+    type kerberos_port_t;
+    class file { read execute execute_no_trans getattr open };
+    class tcp_socket { name_bind name_connect };
+    class process { setpgid siginh rlimitinh noatsecure };
+}
+
+# allow mysqld to run rsyncd
+allow mysqld_t self:process setpgid;
+allow mysqld_t rsync_exec_t:file { read execute execute_no_trans getattr open };
+allow mysqld_t anon_inodefs_t:file getattr;
+allow mysqld_t proc_net_t:file { read open };
+
+# allow rsyncd to listen on port 4444
+allow mysqld_t kerberos_port_t:tcp_socket { name_bind name_connect };
+
--- a/mariadb-spider_on_armv7hl.patch
+++ b/mariadb-spider_on_armv7hl.patch
--- a/mariadb-ssl-cipher-tests.patch
+++ b/mariadb-ssl-cipher-tests.patch
@ -0,0 +1,13 @@
+diff -up mariadb-10.3.9/mysql-test/main/ssl_cipher.test.fixtest mariadb-10.3.9/mysql-test/main/ssl_cipher.test
+--- mariadb-10.3.13/mysql-test/main/ssl_cipher.test	2019-02-20 08:59:09.000000000 +0100
+++ mariadb-10.3.13/mysql-test/main/ssl_cipher.test_patched	2019-02-22 11:22:01.250256060 +0100
+@@ -97,7 +97,9 @@ drop user mysqltest_1@localhost;
+ let $restart_parameters=--ssl-cipher=AES128-SHA;
+ source include/restart_mysqld.inc;
+ connect (ssl_con,localhost,root,,,,,SSL);
+--replace_regex /TLS_AES_.*/AES128-SHA/
+ SHOW STATUS LIKE 'Ssl_cipher';
+--replace_regex /TLS_AES_.*/AES128-SHA/
+ SHOW STATUS LIKE 'Ssl_cipher_list';
+ disconnect ssl_con;
+ connection default;
--- a/mariadb-ssl-cypher.patch
+++ b/mariadb-ssl-cypher.patch
@ -0,0 +1,21 @@
+diff -up mariadb-10.1.19/mysql-test/r/ssl_8k_key.result.sslbak mariadb-10.1.19/mysql-test/r/ssl_8k_key.result
+--- mariadb-10.1.19/mysql-test/r/ssl_8k_key.result.sslbak	2016-11-24 08:55:21.637000000 -0500
+++ mariadb-10.1.19/mysql-test/r/ssl_8k_key.result	2016-11-24 08:55:55.853000000 -0500
+@@ -1,2 +1,2 @@
+-Variable_name	Value
+-Ssl_cipher	DHE-RSA-AES256-SHA
+have_ssl
+1
+diff -up mariadb-10.1.19/mysql-test/t/ssl_8k_key.test.sslbak mariadb-10.1.19/mysql-test/t/ssl_8k_key.test
+--- mariadb-10.1.19/mysql-test/t/ssl_8k_key.test.sslbak	2016-11-24 08:54:10.485000000 -0500
+++ mariadb-10.1.19/mysql-test/t/ssl_8k_key.test	2016-11-24 08:54:35.724000000 -0500
+@@ -5,7 +5,7 @@
+ #
+ # Bug#29784 YaSSL assertion failure when reading 8k key.
+ #
+---exec $MYSQL --ssl --ssl-key=$MYSQL_TEST_DIR/std_data/client-key.pem --ssl-cert=$MYSQL_TEST_DIR/std_data/client-cert.pem -e "SHOW STATUS LIKE 'ssl_Cipher'" 2>&1
+--exec $MYSQL --ssl --ssl-key=$MYSQL_TEST_DIR/std_data/client-key.pem --ssl-cert=$MYSQL_TEST_DIR/std_data/client-cert.pem -e "SELECT (VARIABLE_VALUE <> '') AS have_ssl FROM INFORMATION_SCHEMA.SESSION_STATUS WHERE VARIABLE_NAME='Ssl_cipher'" 2>&1
+ 
+ ##  This test file is for testing encrypted communication only, not other
+ ##  encryption routines that the SSL library happens to provide!
+
--- a/mariadb.rpmlintrc
+++ b/mariadb.rpmlintrc
@ -0,0 +1,65 @@
+# THIS FILE SERVES FOR WHITELISTING RPMLINT ERRORS AND WARNINGS IN TASKOTRON
+# https://fedoraproject.org/wiki/Taskotron/Tasks/dist.rpmlint#Whitelisting_errors
+
+# (same file in python3 package served as a great example)
+
+
+
+# Spelling errors
+addFilter(r'spelling-error .* en_US (cnf|mysqld|benchmarking|pam|passwordless|subpackage|libmariadb) ')
+
+# Debugsource
+addFilter(r'^mariadb.*debugsource\.[^:]+: (E|W): no-documentation')
+# Debuginfo
+addFilter(r'^mariadb.*debuginfo\.[^:]+: (E|W): useless-provides debuginfo\(build-id\)')
+# Debug symlinks
+addFilter(r'dangling-relative-symlink /usr/lib/.build-id')
+
+# Testsuite
+#   Some expected tests results are zero-length files
+addFilter(r'(zero-length|pem-certificate) /usr/share/mysql-test/*')
+
+# Chroot function
+#   False positive; checked by upstream
+addFilter(r'missing-call-to-chdir-with-chroot')
+
+# Missing documentation
+#   I don't think that's on the upstream priority list
+addFilter(r'no-documentation')
+addFilter(r'no-manual-page-for-binary')
+
+# Obsoleted not provided
+#   Obsoleting upstream packages, not providing them is expected to not mix them up
+addFilter(r'obsolete-not-provided MySQL')
+#   Provided by mariadb-connector-c
+addFilter(r'obsolete-not-provided mariadb-libs')
+
+# Config file without noreplace flag
+#   Don't replace logs that may contain old entries
+addFilter(r'conffile-without-noreplace-flag /var/log/mariadb/mariadb.log')
+
+# Log rotation
+#   MariaDB log rotation script is commented out, because it is still not ready for big industry usage.
+#   Let the user decide, if they want to enable it (uncomment it)
+addFilter(r'incoherent-logrotate-file /etc/logrotate.d/mariadb')
+
+# Permissions
+# wsrep_sst_common
+#   It contains a parser of arguments for other sst scripts.
+#   It is meant to be sourced, not to be executed alone.
+#   So it correctly does not have shebang nor executable bit.
+addFilter(r'non-executable-in-bin /usr/bin/wsrep_sst_common 644')
+addFilter(r'script-without-shebang /usr/bin/wsrep_sst_common')
+addFilter(r'non-executable-script /usr/bin/wsrep_sst_common 644 None')
+# mysql-scripts-common has a simmilar issue
+addFilter(r'non-executable-script /usr/libexec/mysql-scripts-common 644 /bin/sh')
+# Seems pretty standard to me ...
+addFilter(r'non-standard-dir-perm /var/log/mariadb 750')
+
+# Unversioned bundles
+#  RocksDB has so rapid developement, it it not compatible through versions.
+#  That means we need to stick to the exact verison upstream use.
+addFilter(r'unversioned-explicit-provides bundled(rocksdb)')
+
+# Testsuite errors
+addFilter(r'non-executable-script /usr/share/mysql-test')
--- a/mariadb.spec
+++ b/mariadb.spec
--- a/my.cnf.in
+++ b/my.cnf.in
@ -0,0 +1,18 @@
+#
+# This group is read both both by the client and the server
+# use it for options that affect everything
+#
+[client-server]
+
+#
+# This group is read by the server
+#
+[mysqld]
+# Disabling symbolic-links is recommended to prevent assorted security risks
+symbolic-links=0
+
+#
+# include all files from the config directory
+#
+!includedir @INSTALL_SYSCONF2DIR@
+
--- a/mysql-check-socket.sh
+++ b/mysql-check-socket.sh
@ -0,0 +1,39 @@
+#!/bin/sh
+
+# We check if there is already a process using the socket file,
+# since otherwise the systemd service file could report false
+# positive result when starting and mysqld_safe could remove
+# a socket file, which is actually being used by a different daemon.
+
+source "`dirname ${BASH_SOURCE[0]}`/mysql-scripts-common"
+
+if test -e "$socketfile" ; then
+    echo "Socket file $socketfile exists." >&2
+
+    # no write permissions
+    if ! test -w "$socketfile" ; then
+        echo "Not enough permission to write to the socket file $socketfile, which is suspicious." >&2
+        echo "Please, remove $socketfile manually to start the service." >&2
+        exit 1
+    fi
+
+    # not a socket file
+    if ! test -S "$socketfile" ; then
+        echo "The file $socketfile is not a socket file, which is suspicious." >&2
+        echo "Please, remove $socketfile manually to start the service." >&2
+        exit 1
+    fi
+
+    # some process uses the socket file
+    response=`@bindir@/mysqladmin --no-defaults --socket="$socketfile" --user=UNKNOWN_MYSQL_USER --connect-timeout="${CHECKSOCKETTIMEOUT:-10}" ping 2>&1`
+    if [ $? -eq 0 ] || echo "$response" | grep -q "Access denied for user" ; then
+        echo "Is another MySQL daemon already running with the same unix socket?" >&2
+        echo "Please, stop the process using the socket $socketfile or remove the file manually to start the service." >&2
+        exit 1
+    fi
+
+    # socket file is a garbage
+    echo "No process is using $socketfile, which means it is a garbage, so it will be removed automatically." >&2
+fi
+
+exit 0
--- a/mysql-check-upgrade.sh
+++ b/mysql-check-upgrade.sh
@ -0,0 +1,39 @@
+#!/bin/sh
+
+source "`dirname ${BASH_SOURCE[0]}`/mysql-scripts-common"
+
+upgrade_info_file="$datadir/mysql_upgrade_info"
+version=0
+# get version as integer from mysql_upgrade_info file
+if [ -f "$upgrade_info_file" ] && [ -r "$upgrade_info_file" ] ; then
+    version_major=$(cat "$upgrade_info_file" | head -n 1 | sed -e 's/\([0-9]*\)\.\([0-9]*\)\..*$/\1/')
+    version_minor=$(cat "$upgrade_info_file" | head -n 1 | sed -e 's/\([0-9]*\)\.\([0-9]*\)\..*$/\2/')
+    if [[ $version_major =~ ^[0-9]+$ ]] && [[ $version_minor =~ ^[0-9]+$ ]] ; then
+        version=$((version_major*100+version_minor))
+    fi
+fi
+
+# compute current version as integer
+thisversion=$((@MAJOR_VERSION@*100+@MINOR_VERSION@))
+
+# provide warning in cases we should run mysql_upgrade
+if [ $version -ne $thisversion ] ; then
+
+    # give extra warning if some version seems to be skipped
+    if [ $version -gt 0 ] && [ $version -lt 505 ] ; then
+        echo "The datadir located at $datadir seems to be older than of a version 5.5. Please, mind that as a general rule, to upgrade from one release series to another, go to the next series rather than skipping a series." >&2
+    fi
+
+    cat <<EOF >&2
+The datadir located at $datadir needs to be upgraded using 'mysql_upgrade' tool. This can be done using the following steps:
+
+  1. Back-up your data before with 'mysql_upgrade'
+  2. Start the database daemon using 'service @DAEMON_NAME@ start'
+  3. Run 'mysql_upgrade' with a database user that has sufficient privileges
+
+Read more about 'mysql_upgrade' usage at:
+https://mariadb.com/kb/en/mariadb/documentation/sql-commands/table-commands/mysql_upgrade/
+EOF
+fi
+
+exit 0
--- a/mysql-prepare-db-dir.sh
+++ b/mysql-prepare-db-dir.sh
@ -0,0 +1,137 @@
+#!/bin/sh
+
+# This script creates the mysql data directory during first service start.
+# In subsequent starts, it does nothing much.
+
+source "`dirname ${BASH_SOURCE[0]}`/mysql-scripts-common"
+
+export LC_ALL=C
+
+# Returns content of the specified directory
+# If listing files fails, fake-file is returned so which means
+# we'll behave like there was some data initialized
+# Some files or directories are fine to be there, so those are
+# explicitly removed from the listing
+# @param <dir> datadir
+list_datadir ()
+{
+    ( ls -1A "$1" 2>/dev/null || echo "fake-file" ) | grep -v \
+    -e '^lost+found$' \
+    -e '\.err$' \
+    -e '^.bash_history$'
+}
+
+# Checks whether datadir should be initialized
+# @param <dir> datadir
+should_initialize ()
+{
+    test -z "$(list_datadir "$1")"
+}
+
+# If two args given first is user, second is group
+# otherwise the arg is the systemd service file
+if [ "$#" -eq 2 ]
+then
+    myuser="$1"
+    mygroup="$2"
+else
+    # Absorb configuration settings from the specified systemd service file,
+    # or the default service if not specified
+    SERVICE_NAME="$1"
+    if [ x"$SERVICE_NAME" = x ]
+    then
+        SERVICE_NAME=@DAEMON_NAME@.service
+    fi
+
+    myuser=`systemctl show -p User "${SERVICE_NAME}" |
+      sed 's/^User=//'`
+    if [ x"$myuser" = x ]
+    then
+        myuser=mysql
+    fi
+
+    mygroup=`systemctl show -p Group "${SERVICE_NAME}" |
+      sed 's/^Group=//'`
+    if [ x"$mygroup" = x ]
+    then
+        mygroup=mysql
+    fi
+fi
+
+# Set up the errlogfile with appropriate permissions
+if [ ! -e "$errlogfile" -a ! -h "$errlogfile" -a x$(dirname "$errlogfile") = "x/var/log" ]; then
+    case $(basename "$errlogfile") in
+        mysql*.log|mariadb*.log) install /dev/null -m0640 -o$myuser -g$mygroup "$errlogfile" ;;
+        *) ;;
+    esac
+else
+    # Provide some advice if the log file cannot be created by this script
+    errlogdir=$(dirname "$errlogfile")
+    if ! [ -d "$errlogdir" ] ; then
+        echo "The directory $errlogdir does not exist." >&2
+        exit 1
+    elif [ -e "$errlogfile" -a ! -w "$errlogfile" ] ; then
+        echo "The log file $errlogfile cannot be written, please, fix its permissions." >&2
+        echo "The daemon will be run under $myuser:$mygroup" >&2
+        exit 1
+    fi
+fi
+
+# Make the data directory if doesn't exist or empty
+if should_initialize "$datadir" ; then
+    # First, make sure $datadir is there with correct permissions
+    # (note: if it's not, and we're not root, this'll fail ...)
+    if [ ! -e "$datadir" -a ! -h "$datadir" ]
+    then
+        mkdir -p "$datadir" || exit 1
+    fi
+    chown "$myuser:$mygroup" "$datadir"
+    chmod 0755 "$datadir"
+    [ -x /sbin/restorecon ] && /sbin/restorecon "$datadir"
+
+    # Now create the database
+    echo "Initializing @NICE_PROJECT_NAME@ database" >&2
+    # Avoiding deletion of files not created by mysql_install_db is
+    # guarded by time check and sleep should help work-arounded
+    # potential issues on systems with 1 second resolution timestamps
+    # https://bugzilla.redhat.com/show_bug.cgi?id=1335849#c19
+    INITDB_TIMESTAMP=`LANG=C date -u`
+    sleep 1
+    @bindir@/mysql_install_db --rpm --datadir="$datadir" --user="$myuser" --skip-test-db >&2
+    ret=$?
+    if [ $ret -ne 0 ] ; then
+        echo "Initialization of @NICE_PROJECT_NAME@ database failed." >&2
+        echo "Perhaps @sysconfdir@/my.cnf is misconfigured or there is some problem with permissions of $datadir." >&2
+        # Clean up any partially-created database files
+        if [ ! -e "$datadir/mysql/user.frm" ] && [ -d "$datadir" ] ; then
+            echo "Initialization of @NICE_PROJECT_NAME@ database was not finished successfully." >&2
+            echo "Files created so far will be removed." >&2
+            find "$datadir" -mindepth 1 -maxdepth 1 -newermt "$INITDB_TIMESTAMP" \
+                 -not -name "lost+found" -exec rm -rf {} +
+            if [ $? -ne 0 ] ; then
+                echo "Removing of created files was not successfull." >&2
+                echo "Please, clean directory $datadir manually." >&2
+            fi
+        else
+            echo "However, part of data has been initialized and those will not be removed." >&2
+            echo "Please, clean directory $datadir manually." >&2
+        fi
+        exit $ret
+    fi
+    # upgrade does not need to be run on a fresh datadir
+    echo "@VERSION@-MariaDB" >"$datadir/mysql_upgrade_info"
+else
+    if [ -d "$datadir/mysql/" ] ; then
+        # mysql dir exists, it seems data are initialized properly
+        echo "Database @NICE_PROJECT_NAME@ is probably initialized in $datadir already, nothing is done."
+        echo "If this is not the case, make sure the $datadir is empty before running `basename $0`."
+    else
+        # if the directory is not empty but mysql/ directory is missing, then
+        # print error and let user to initialize manually or empty the directory
+        echo "Database @NICE_PROJECT_NAME@ is not initialized, but the directory $datadir is not empty, so initialization cannot be done." >&2
+        echo "Make sure the $datadir is empty before running `basename $0`." >&2
+        exit 1
+    fi
+fi
+
+exit 0
--- a/mysql-scripts-common.sh
+++ b/mysql-scripts-common.sh
@ -0,0 +1,68 @@
+#!/bin/sh
+
+# Some useful functions used in other MySQL helper scripts
+# This scripts defines variables datadir, errlogfile, socketfile
+
+export LC_ALL=C
+
+# extract value of a MySQL option from config files
+# Usage: get_mysql_option VARNAME DEFAULT SECTION [ SECTION, ... ]
+# result is returned in $result
+# We use my_print_defaults which prints all options from multiple files,
+# with the more specific ones later; hence take the last match.
+get_mysql_option(){
+	if [ $# -ne 3 ] ; then
+		echo "get_mysql_option requires 3 arguments: section option default_value"
+		return
+	fi
+	sections="$1"
+	option_name="$2"
+	default_value="$3"
+	result=`@bindir@/my_print_defaults $my_print_defaults_extra_args $sections | sed -n "s/^--${option_name}=//p" | tail -n 1`
+	if [ -z "$result" ]; then
+	    # not found, use default
+	    result="${default_value}"
+	fi
+}
+
+# For the case of running more instances via systemd, scrits that source
+# this file can get --default-group-suffix or similar option as the first
+# argument. The utility my_print_defaults needs to use it as well, so the
+# scripts sourcing this file work with the same options as the daemon.
+my_print_defaults_extra_args=''
+while echo "$1" | grep -q '^--defaults' ; do
+	my_print_defaults_extra_args="${my_print_defaults_extra_args} $1"
+	shift
+done
+
+# Defaults here had better match what mysqld_safe will default to
+# The option values are generally defined on three important places
+# on the default installation:
+#  1) default values are hardcoded in the code of mysqld daemon or
+#     mysqld_safe script
+#  2) configurable values are defined in @sysconfdir@/my.cnf
+#  3) default values for helper scripts are specified bellow
+# So, in case values are defined in my.cnf, we need to get that value.
+# In case they are not defined in my.cnf, we need to get the same value
+# in the daemon, as in the helper scripts. Thus, default values here
+# must correspond with values defined in mysqld_safe script and source
+# code itself.
+
+server_sections="mysqld_safe mysqld server mysqld-@MAJOR_VERSION@.@MINOR_VERSION@ mariadb mariadb-@MAJOR_VERSION@.@MINOR_VERSION@ client-server"
+
+get_mysql_option "$server_sections" datadir "@MYSQL_DATADIR@"
+datadir="$result"
+
+# if there is log_error in the my.cnf, my_print_defaults still
+# returns log-error
+# log-error might be defined in mysqld_safe and mysqld sections,
+# the former has bigger priority
+get_mysql_option "$server_sections" log-error "$datadir/`uname -n`.err"
+errlogfile="$result"
+
+get_mysql_option "$server_sections" socket "@MYSQL_UNIX_ADDR@"
+socketfile="$result"
+
+get_mysql_option "$server_sections" pid-file "$datadir/`uname -n`.pid"
+pidfile="$result"
+
--- a/mysql.service.in
+++ b/mysql.service.in
@ -0,0 +1,73 @@
+# It's not recommended to modify this file in-place, because it will be
+# overwritten during package upgrades.  If you want to customize, the
+# best way is to create a file "/etc/systemd/system/@DAEMON_NAME@.service",
+# containing
+#	.include /usr/lib/systemd/system/@DAEMON_NAME@.service
+#	...make your changes here...
+# or create a file "/etc/systemd/system/@DAEMON_NAME@.service.d/foo.conf",
+# which doesn't need to include ".include" call and which will be parsed
+# after the file @DAEMON_NAME@.service itself is parsed.
+#
+# For more info about custom unit files, see systemd.unit(5) or
+# http://fedoraproject.org/wiki/Systemd#How_do_I_customize_a_unit_file.2F_add_a_custom_unit_file.3F
+
+# For example, if you want to increase mysql's open-files-limit to 10000,
+# you need to increase systemd's LimitNOFILE setting, so create a file named
+# "/etc/systemd/system/@DAEMON_NAME@.service.d/limits.conf" containing:
+#	[Service]
+#	LimitNOFILE=10000
+
+# Note: /usr/lib/... is recommended in the .include line though /lib/...
+# still works.
+# Don't forget to reload systemd daemon after you change unit configuration:
+# root> systemctl --system daemon-reload
+
+# Use [mysqld.INSTANCENAME] as sections in my.cnf to configure this instance.
+
+[Unit]
+Description=@NICE_PROJECT_NAME@ @MAJOR_VERSION@.@MINOR_VERSION@ database server
+Documentation=man:mysqld(8)
+Documentation=https://mariadb.com/kb/en/library/systemd/
+After=network.target
+
+[Install]
+WantedBy=multi-user.target
+Alias=mysql.service
+Alias=mysqld.service
+
+[Service]
+Type=notify
+User=mysql
+Group=mysql
+
+ExecStartPre=@libexecdir@/mysql-check-socket
+# '%n' expands to 'Full unit name'; man systemd.unit
+ExecStartPre=@libexecdir@/mysql-prepare-db-dir %n
+# MYSQLD_OPTS here is for users to set in /etc/systemd/system/@DAEMON_NAME@@.service.d/MY_SPECIAL.conf
+# Note: we set --basedir to prevent probes that might trigger SELinux alarms,
+# per bug #547485
+ExecStart=@libexecdir@/mysqld --basedir=@prefix@ $MYSQLD_OPTS $_WSREP_NEW_CLUSTER
+ExecStartPost=@libexecdir@/mysql-check-upgrade
+
+# Setting this to true can break replication and the Type=notify settings
+# See also bind-address mysqld option.
+PrivateNetwork=false
+
+KillMode=process
+KillSignal=SIGTERM
+
+# Don't want to see an automated SIGKILL ever
+SendSIGKILL=no
+
+# Restart crashed server only, on-failure would also restart, for example, when
+# my.cnf contains unknown option
+Restart=on-abort
+RestartSec=5s
+
+UMask=007
+
+# Give a reasonable amount of time for the server to start up/shut down
+TimeoutSec=300
+
+# Place temp files in a secure directory, not /tmp
+PrivateTmp=true
--- a/mysql.tmpfiles.d.in
+++ b/mysql.tmpfiles.d.in
@ -0,0 +1,3 @@
+# Do not edit this file.
+# To override this, put /etc/tmpfiles.d/mariadb.conf instead.
+d @PID_FILE_DIR@ 0755 mysql mysql -
--- a/mysql@.service.in
+++ b/mysql@.service.in
@ -0,0 +1,79 @@
+# Multi instance version of mariadb. For if you run mutiple verions at once.
+# Also used for @DAEMON_NAME@@bootstrap to bootstrap Galera.
+#
+# To use multi instance variant, use [mysqld.INSTANCENAME] as sections in my.cnf
+# and start the service via:
+#	systemctl start @DAEMON_NAME@@{instancename}.server
+#
+# It's not recommended to modify this file in-place, because it will be
+# overwritten during package upgrades.  If you want to customize, the
+# best way is to create a file "/etc/systemd/system/@DAEMON_NAME@.service",
+# containing
+#	.include /usr/lib/systemd/system/@DAEMON_NAME@.service
+#	...make your changes here...
+# or create a file "/etc/systemd/system/@DAEMON_NAME@.service.d/foo.conf",
+# which doesn't need to include ".include" call and which will be parsed
+# after the file @DAEMON_NAME@.service itself is parsed.
+#
+# For more info about custom unit files, see systemd.unit(5) or
+# http://fedoraproject.org/wiki/Systemd#How_do_I_customize_a_unit_file.2F_add_a_custom_unit_file.3F
+
+# For example, if you want to increase mysql's open-files-limit to 10000,
+# you need to increase systemd's LimitNOFILE setting, so create a file named
+# "/etc/systemd/system/@DAEMON_NAME@.service.d/limits.conf" containing:
+#	[Service]
+#	LimitNOFILE=10000
+
+# Note: /usr/lib/... is recommended in the .include line though /lib/...
+# still works.
+# Don't forget to reload systemd daemon after you change unit configuration:
+# root> systemctl --system daemon-reload
+
+# Use [mysqld.INSTANCENAME] as sections in my.cnf to configure this instance.
+
+[Unit]
+Description=@NICE_PROJECT_NAME@ @MAJOR_VERSION@.@MINOR_VERSION@ database server
+Documentation=man:mysqld(8)
+Documentation=https://mariadb.com/kb/en/library/systemd/
+After=network.target
+
+[Install]
+WantedBy=multi-user.target
+Alias=mysql.service
+Alias=mysqld.service
+
+[Service]
+Type=notify
+User=mysql
+Group=mysql
+
+ExecStartPre=@libexecdir@/mysql-check-socket --defaults-group-suffix=.%I
+ExecStartPre=@libexecdir@/mysql-prepare-db-dir --defaults-group-suffix=.%I %n
+# MYSQLD_OPTS here is for users to set in /etc/systemd/system/@DAEMON_NAME@@.service.d/MY_SPECIAL.conf
+# Note: we set --basedir to prevent probes that might trigger SELinux alarms,
+# per bug #547485
+ExecStart=@libexecdir@/mysqld --defaults-group-suffix=.%I --basedir=@prefix@ $MYSQLD_OPTS $_WSREP_NEW_CLUSTER
+ExecStartPost=@libexecdir@/mysql-check-upgrade --defaults-group-suffix=.%I
+
+# Setting this to true can break replication and the Type=notify settings
+# See also bind-address mysqld option.
+PrivateNetwork=false
+
+KillMode=process
+KillSignal=SIGTERM
+
+# Don't want to see an automated SIGKILL ever
+SendSIGKILL=no
+
+# Restart crashed server only, on-failure would also restart, for example, when
+# my.cnf contains unknown option
+Restart=on-abort
+RestartSec=5s
+
+UMask=007
+
+# Give a reasonable amount of time for the server to start up/shut down
+TimeoutSec=300
+
+# Place temp files in a secure directory, not /tmp
+PrivateTmp=true
--- a/mysql_config_multilib.sh
+++ b/mysql_config_multilib.sh
@ -0,0 +1,26 @@
+#! /bin/sh
+#
+# Wrapper script for mysql_config to support multilib
+#
+# This command respects setarch
+
+bits=$(rpm --eval %__isa_bits)
+
+case $bits in
+    32|64) status=known ;;
+        *) status=unknown ;;
+esac
+
+if [ "$status" = "unknown" ] ; then
+    echo "$0: error: command 'rpm --eval %__isa_bits' returned unknown value: $bits"
+    exit 1
+fi
+
+
+if [ -x @bindir@/mysql_config-$bits ] ; then
+    @bindir@/mysql_config-$bits "$@"
+else
+    echo "$0: error: needed binary: @bindir@/mysql_config-$bits is missing"
+    exit 1
+fi
+
--- a/rh-skipped-tests-arm.list
+++ b/rh-skipped-tests-arm.list
@ -0,0 +1,2 @@
+# Fails since 10.3.17, only on armv7hl
+versioning.partition      :
--- a/rh-skipped-tests-base.list
+++ b/rh-skipped-tests-base.list
@ -0,0 +1,43 @@
+# The SSL test are failing correctly. Fro more explanation, see:
+# https://jira.mariadb.org/browse/MDEV-8404?focusedCommentId=84275&page=com.atlassian.jira.plugin.system.issuetabpanels%3Acomment-tabpanel#comment-84275
+main.ssl_7937                                : #1399847
+main.ssl_8k_key                              :
+main.ssl_crl                                 : #1399847
+
+# ------------------------------
+# Tests that fails because of 'Self Signed Certificate in the Certificate Chain'
+perfschema.cnf_option                        :
+
+rpl.rpl_row_img_blobs                        :
+rpl.rpl_row_img_eng_min                      :
+rpl.rpl_row_img_eng_noblob                   :
+
+sys_vars.slave_parallel_threads_basic        :
+
+# ------------------------------
+# Expected to fail, the plugin is not build with server, but 'mariadb-connector-c' instead
+plugins.auth_ed25519                         :
+plugins.multiauth                            :
+
+# ------------------------------
+perfschema.nesting                           : #1399847
+perfschema.socket_summary_by_instance_func   : #1399847
+perfschema.socket_summary_by_event_name_func :
+
+# ------------------------------
+# Fails since 10.1.12
+innodb.innodb_defrag_binlog                  :
+
+# Fails everywhere since 10.2.15
+main.userstat				     :
+
+# Fails everywhere since 10.4.11
+main.events_bugs                             :
+sys_vars.tcp_nodelay                         :
+
+# Fails on i686
+encryption.innodb-redo-badkey                :
+
+# Fails on all architectures since 10.4.14
+main.ssl_system_ca                           :
+disks.disks                                  :
--- a/rh-skipped-tests-ppc.list
+++ b/rh-skipped-tests-ppc.list
@ -0,0 +1,2 @@
+# Fails on ppc64le since 10.4.12
+oqgraph.social : 
--- a/rh-skipped-tests-s390.list
+++ b/rh-skipped-tests-s390.list
@ -0,0 +1,4 @@
+# Fails since 10.2.15
+disks.disks                    :
+# Fails since 10.4.11
+disks.disks_notembedded        :
--- a/1
+++ b/1
@ -0,0 +1 @@
+SHA512 (mariadb-10.4.14.tar.gz) = c09817c1dd7962132bcf2886c97ad17ce43c00ee687724028e5f39f6a6a93877ae8695c2c795abba6a4f3bc40674f93a53d6d43f46788a4a8a42c4a65a22c91c
--- a/tests/basic_service/Makefile
+++ b/tests/basic_service/Makefile
@ -0,0 +1,62 @@
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+#
+#   Makefile of /CoreOS/tests/Sanity/basic_service
+#   Description: The very basic service testing
+#   Author: Michal Schorm <mschorm@redhat.com>
+#
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+#
+#   Copyright (c) 2018 Red Hat, Inc.
+#
+#   This program is free software: you can redistribute it and/or
+#   modify it under the terms of the GNU General Public License as
+#   published by the Free Software Foundation, either version 2 of
+#   the License, or (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be
+#   useful, but WITHOUT ANY WARRANTY; without even the implied
+#   warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+#   PURPOSE.  See the GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program. If not, see http://www.gnu.org/licenses/.
+#
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+export TEST=basic_service
+export TESTVERSION=1.0
+
+BUILT_FILES=
+
+FILES=$(METADATA) runtest.sh Makefile PURPOSE
+
+.PHONY: all install download clean
+
+run: $(FILES) build
+	./runtest.sh
+
+build: $(BUILT_FILES)
+	test -x runtest.sh || chmod a+x runtest.sh
+
+clean:
+	rm -f *~ $(BUILT_FILES)
+
+
+include /usr/share/rhts/lib/rhts-make.include
+
+$(METADATA): Makefile
+	@echo "Owner:           Michal Schorm <mschorm@redhat.com>" > $(METADATA)
+	@echo "Name:            $(TEST)" >> $(METADATA)
+	@echo "TestVersion:     $(TESTVERSION)" >> $(METADATA)
+	@echo "Path:            $(TEST_DIR)" >> $(METADATA)
+	@echo "Description:     The very basic service testing" >> $(METADATA)
+	@echo "Type:            Sanity" >> $(METADATA)
+	@echo "TestTime:        5m" >> $(METADATA)
+	@echo "RunFor:          mariadb" >> $(METADATA)
+	@echo "Requires:        mariadb" >> $(METADATA)
+	@echo "Priority:        Normal" >> $(METADATA)
+	@echo "License:         GPLv2+" >> $(METADATA)
+	@echo "Confidential:    no" >> $(METADATA)
+	@echo "Destructive:     no" >> $(METADATA)
+
+	rhts-lint $(METADATA)
--- a/tests/basic_service/PURPOSE
+++ b/tests/basic_service/PURPOSE
@ -0,0 +1,3 @@
+PURPOSE of basic_service
+Description: The very basic service testing
+Author: Michal Schorm <mschorm@redhat.com>
--- a/tests/basic_service/runtest.sh
+++ b/tests/basic_service/runtest.sh
@ -0,0 +1,72 @@
+#!/bin/bash
+# vim: dict+=/usr/share/beakerlib/dictionary.vim cpt=.,w,b,u,t,i,k
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+#
+#   runtest.sh of basic_service
+#   Description: The very basic service testing
+#   Author: Michal Schorm <mschorm@redhat.com>
+#
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+#
+#   Copyright (c) 2018 Red Hat, Inc.
+#
+#   This program is free software: you can redistribute it and/or
+#   modify it under the terms of the GNU General Public License as
+#   published by the Free Software Foundation, either version 2 of
+#   the License, or (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be
+#   useful, but WITHOUT ANY WARRANTY; without even the implied
+#   warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+#   PURPOSE.  See the GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program. If not, see http://www.gnu.org/licenses/.
+#
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+# Include Beaker environment
+. /usr/bin/rhts-environment.sh || exit 1
+. /usr/share/beakerlib/beakerlib.sh || exit 1
+
+PACKAGE="mariadb"
+
+rlJournalStart
+    rlPhaseStartSetup
+        rlAssertRpm $PACKAGE
+        rlRun "TmpDir=\$(mktemp -d)" 0 "Creating tmp directory"
+        rlRun "systemctl stop mariadb"
+        rlRun "pushd $TmpDir"
+    rlPhaseEnd
+
+
+
+    rlPhaseStartTest
+        rlRun "systemctl -q status mariadb" 3 "Test status of dead service"
+        rlRun "systemctl -q start mariadb" 0 "Start mariadb service"
+        rlRun "systemctl -q status mariadb" 0 "Test status of running mariadb service"
+    rlPhaseEnd
+
+    rlPhaseStartTest
+        rlRun "systemctl -q restart mariadb" 0 "Restart running mariadb service"
+        rlRun "systemctl -q status mariadb" 0 "Test status of running mariadb service"
+    rlPhaseEnd
+
+    rlPhaseStartTest
+        rlRun "systemctl -q stop mariadb" 0 "Stop mariadb service"
+        rlRun "systemctl -q status mariadb" 3 "Test status of dead mariadb service"
+    rlPhaseEnd
+
+    rlPhaseStartTest
+        rlRun "systemctl -q start mariadb" 0 "Start mariadb service"
+        rlRun "systemctl -q status mariadb" 0 "Test status of running mariadb service"
+    rlPhaseEnd
+
+
+
+    rlPhaseStartCleanup
+        rlRun "popd"
+        rlRun "rm -r $TmpDir" 0 "Removing tmp directory"
+    rlPhaseEnd
+rlJournalPrintText
+rlJournalEnd
--- a/tests/tests.yml
+++ b/tests/tests.yml
@ -0,0 +1,30 @@
+---
+
+# --------------------------------------------------
+# This is an experiment with Fedora CI
+#
+# Refer to:
+# https://fedoraproject.org/wiki/CI/Tests
+#
+# TL;DR you have to, as root:
+#  1) # dnf install ansible python2-dnf libselinux-python standard-test-roles
+#  2) install the packages to be tested
+#  3) # ansible-playbook tests.yml
+#
+# Warning !!
+#  DO NOT run it on a machine that SHOULD NOT be destroyed.
+#
+# --------------------------------------------------
+
+# Tests that run in classic context
+- hosts: localhost
+  roles:
+  - role: standard-test-beakerlib
+    tags:
+    - classic
+    tests:
+    - basic_service
+    required_packages:
+    - mariadb
+
+
				`@ -0,0 +1 @@`
				`SHA512 (mariadb-10.4.14.tar.gz) = c09817c1dd7962132bcf2886c97ad17ce43c00ee687724028e5f39f6a6a93877ae8695c2c795abba6a4f3bc40674f93a53d6d43f46788a4a8a42c4a65a22c91c`