import mariadb-10.5.8-1.module+el8.4.0+9031+9abc7af9

This commit is contained in:
CentOS Sources 2020-12-22 18:16:03 +00:00 committed by Andrew Lukoshko
commit 40fcf3ec2f
30 changed files with 4785 additions and 0 deletions

1
.gitignore vendored Normal file
View File

@ -0,0 +1 @@
SOURCES/mariadb-10.5.8.tar.gz

1
.mariadb.metadata Normal file
View File

@ -0,0 +1 @@
6442a3c9d9d316086ce6822f18e2e026bd8422d0 SOURCES/mariadb-10.5.8.tar.gz

View File

@ -0,0 +1,27 @@
Copyright (c) 2012-2014, Olaf van Zandwijk
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors
may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

13
SOURCES/README.mysql-cnf Normal file
View File

@ -0,0 +1,13 @@
This directory contains prepared configuration files with .cnf extension,
which provide a configuration for some common MariaDB deployment scenarios.
These configuration files do not include the default configuration of datadir,
log-file and pid-file locations, as specified in the default my.cnf file,
provided in this distribution.
Thus, it is recommended to use these configuration files as an addition to the
default my.cnf configuration file.
Since default my.cnf contains `!includedir @INSTALL_SYSCONF2DIR@` directive, it is
recommended to copy required configuration under @INSTALL_SYSCONF2DIR@ directory,
so the default my.cnf specifications will be extended.

View File

@ -0,0 +1,4 @@
The official MySQL documentation is not freely redistributable, so we cannot
include it in RHEL or Fedora. You can find it on-line at
http://dev.mysql.com/doc/

View File

@ -0,0 +1,9 @@
MySQL is distributed under GPL v2, but there are some licensing exceptions
that allow the client libraries to be linked with a non-GPL application,
so long as the application is under a license approved by Oracle.
For details see
http://www.mysql.com/about/legal/licensing/foss-exception/
Some innobase code from Percona and Google is under BSD license.
Some code related to test-suite is under LGPLv2.

89
SOURCES/clustercheck.sh Normal file
View File

@ -0,0 +1,89 @@
#!/bin/bash
#
# Script to make a proxy (ie HAProxy) capable of monitoring Galera cluster nodes properly
#
# Author: Olaf van Zandwijk <olaf.vanzandwijk@nedap.com>
# Author: Raghavendra Prabhu <raghavendra.prabhu@percona.com>
# Author: Ryan O'Hara <rohara@redhat.com>
#
# Documentation and download: https://github.com/olafz/percona-clustercheck
#
# Based on the original script from Unai Rodriguez
#
if [ -f @INSTALL_SYSCONFDIR@/sysconfig/clustercheck ]; then
. @INSTALL_SYSCONFDIR@/sysconfig/clustercheck
fi
MYSQL_USERNAME="${MYSQL_USERNAME-clustercheckuser}"
MYSQL_PASSWORD="${MYSQL_PASSWORD-clustercheckpassword!}"
MYSQL_HOST="${MYSQL_HOST:-127.0.0.1}"
MYSQL_PORT="${MYSQL_PORT:-3306}"
ERR_FILE="${ERR_FILE:-/dev/null}"
AVAILABLE_WHEN_DONOR=${AVAILABLE_WHEN_DONOR:-0}
AVAILABLE_WHEN_READONLY=${AVAILABLE_WHEN_READONLY:-1}
DEFAULTS_EXTRA_FILE=${DEFAULTS_EXTRA_FILE:-@INSTALL_SYSCONFDIR@/my.cnf}
#Timeout exists for instances where mysqld may be hung
TIMEOUT=10
if [[ -r $DEFAULTS_EXTRA_FILE ]];then
MYSQL_CMDLINE="mysql --defaults-extra-file=$DEFAULTS_EXTRA_FILE -nNE \
--connect-timeout=$TIMEOUT \
--user=${MYSQL_USERNAME} --password=${MYSQL_PASSWORD} \
--host=${MYSQL_HOST} --port=${MYSQL_PORT}"
else
MYSQL_CMDLINE="mysql -nNE --connect-timeout=$TIMEOUT \
--user=${MYSQL_USERNAME} --password=${MYSQL_PASSWORD} \
--host=${MYSQL_HOST} --port=${MYSQL_PORT}"
fi
#
# Perform the query to check the wsrep_local_state
#
WSREP_STATUS=$($MYSQL_CMDLINE -e "SHOW STATUS LIKE 'wsrep_local_state';" \
2>${ERR_FILE} | tail -1 2>>${ERR_FILE})
if [[ "${WSREP_STATUS}" == "4" ]] || [[ "${WSREP_STATUS}" == "2" && ${AVAILABLE_WHEN_DONOR} == 1 ]]
then
# Check only when set to 0 to avoid latency in response.
if [[ $AVAILABLE_WHEN_READONLY -eq 0 ]];then
READ_ONLY=$($MYSQL_CMDLINE -e "SHOW GLOBAL VARIABLES LIKE 'read_only';" \
2>${ERR_FILE} | tail -1 2>>${ERR_FILE})
if [[ "${READ_ONLY}" == "ON" ]];then
# Galera cluster node local state is 'Synced', but it is in
# read-only mode. The variable AVAILABLE_WHEN_READONLY is set to 0.
# => return HTTP 503
# Shell return-code is 1
echo -en "HTTP/1.1 503 Service Unavailable\r\n"
echo -en "Content-Type: text/plain\r\n"
echo -en "Connection: close\r\n"
echo -en "Content-Length: 35\r\n"
echo -en "\r\n"
echo -en "Galera cluster node is read-only.\r\n"
sleep 0.1
exit 1
fi
fi
# Galera cluster node local state is 'Synced' => return HTTP 200
# Shell return-code is 0
echo -en "HTTP/1.1 200 OK\r\n"
echo -en "Content-Type: text/plain\r\n"
echo -en "Connection: close\r\n"
echo -en "Content-Length: 32\r\n"
echo -en "\r\n"
echo -en "Galera cluster node is synced.\r\n"
sleep 0.1
exit 0
else
# Galera cluster node local state is not 'Synced' => return HTTP 503
# Shell return-code is 1
echo -en "HTTP/1.1 503 Service Unavailable\r\n"
echo -en "Content-Type: text/plain\r\n"
echo -en "Connection: close\r\n"
echo -en "Content-Length: 36\r\n"
echo -en "\r\n"
echo -en "Galera cluster node is not synced.\r\n"
sleep 0.1
exit 1
fi

View File

@ -0,0 +1,29 @@
This scirpt is ran by the systemd service.
In Fedora the service has priviledges dropped to the mysql user.
Thus "chown 0" will always fail
Never parse 'ls' output!
http://mywiki.wooledge.org/BashFAQ/087
--- mariadb-10.4.12/scripts/mysql_install_db.sh 2020-01-26 21:43:53.000000000 +0100
+++ mariadb-10.4.12/scripts/mysql_install_db.sh_patched 2020-01-29 11:11:09.448812331 +0100
@@ -482,13 +482,16 @@ if test -n "$user"
then
if test -z "$srcdir" -a "$in_rpm" -eq 0
then
- chown 0 "$pamtooldir/auth_pam_tool_dir/auth_pam_tool" && \
- chmod 04755 "$pamtooldir/auth_pam_tool_dir/auth_pam_tool"
- if test $? -ne 0
+ if [ `stat "$pamtooldir/auth_pam_tool_dir/auth_pam_tool" -c %u` -ne 0 ]
then
+ chown 0 "$pamtooldir/auth_pam_tool_dir/auth_pam_tool" && \
+ chmod 04755 "$pamtooldir/auth_pam_tool_dir/auth_pam_tool"
+ if test $? -ne 0
+ then
echo "Couldn't set an owner to '$pamtooldir/auth_pam_tool_dir/auth_pam_tool'."
echo "It must be root, the PAM authentication plugin doesn't work otherwise.."
echo
+ fi
fi
chown $user "$pamtooldir/auth_pam_tool_dir" && \
chmod 0700 "$pamtooldir/auth_pam_tool_dir"

View File

@ -0,0 +1,30 @@
# Fixing conflict with groonga package
# https://bugzilla.redhat.com/show_bug.cgi?id=1763287
--- mariadb-10.3.18/storage/mroonga/vendor/groonga/CMakeLists.txt.withoutoption 2019-11-11 14:01:07.762595716 +0100
+++ mariadb-10.3.18/storage/mroonga/vendor/groonga/CMakeLists.txt 2019-11-11 14:33:05.224012458 +0100
@@ -86,7 +86,9 @@
set(INCLUDE_DIR "include")
set(GRN_INCLUDE_DIR "include/groonga")
set(DATA_DIR "share")
-set(GRN_DATA_DIR "${DATA_DIR}/${GRN_PROJECT_NAME}")
+if(NOT DEFINED GRN_DATA_DIR)
+ set(GRN_DATA_DIR "${DATA_DIR}/${GRN_PROJECT_NAME}")
+endif()
set(CONFIG_DIR "etc")
set(GRN_CONFIG_DIR "${CONFIG_DIR}/${GRN_PROJECT_NAME}")
set(GRN_CONFIG_PATH "${CMAKE_INSTALL_PREFIX}/${GRN_CONFIG_DIR}/groonga.conf")
--- mariadb-10.3.18/storage/mroonga/vendor/groonga/vendor/plugins/groonga-normalizer-mysql/CMakeLists.txt.withoutoption 2019-11-11 14:34:22.661005715 +0100
+++ mariadb-10.3.18/storage/mroonga/vendor/groonga/vendor/plugins/groonga-normalizer-mysql/CMakeLists.txt 2019-11-11 14:35:59.962244120 +0100
@@ -16,7 +16,9 @@
# MA 02110-1335 USA
cmake_minimum_required(VERSION 2.6)
-set(GROONGA_NORMALIZER_MYSQL_PROJECT_NAME "groonga-normalizer-mysql")
+if (NOT DEFINED GROONGA_NORMALIZER_MYSQL_PROJECT_NAME)
+ set(GROONGA_NORMALIZER_MYSQL_PROJECT_NAME "groonga-normalizer-mysql")
+endif()
project("${GROONGA_NORMALIZER_MYSQL_PROJECT_NAME}")
if(DEFINED GROONGA_NORMALIZER_MYSQL_EMBED)

View File

@ -0,0 +1,73 @@
Adjust the mysql-log-rotate script in several ways:
* Use the correct log file pathname for Red Hat installations.
* Enable creation of the log file by logrotate (needed since
/var/log/ isn't writable by mysql user); and set the same 640
permissions we normally use.
* Comment out the actual rotation commands, so that user must edit
the file to enable rotation. This is unfortunate, but the fact
that the script will probably fail without manual configuration
(to set a root password) means that we can't really have it turned
on by default. Fortunately, in most configurations the log file
is low-volume and so rotation is not critical functionality.
See discussions at RH bugs 799735, 547007
* Note they are from Fedora 15 / 16
Update 3/2017
* it would be big unexpected change for anyone upgrading, if we start shipping it now.
Maybe it is good candidate for shipping with MariaDB 10.2 ?
* the 'mysqladmin flush logs' doesn´t guarantee, no entries are lost
during flushing, the operation is not atomic.
We should not ship it in that state
Update 6/2018
* the SIGHUP causes server to flush all logs. No password admin needed, the only constraint is
beeing able to send the SIGHUP to the process and read the mysqld pid file, which root can.
* Submited as PR: https://github.com/MariaDB/server/pull/807
--- mariadb-10.5.4/support-files/mysql-log-rotate.sh.old 2020-09-16 13:36:57.247955135 +0200
+++ mariadb-10.5.4/support-files/mysql-log-rotate.sh 2020-09-16 13:40:59.744220908 +0200
@@ -3,23 +3,10 @@
# in the [mysqld] section as follows:
#
# [mysqld]
-# log-error=@localstatedir@/mysqld.log
-#
-# If the root user has a password you have to create a
-# /root/.my.cnf configuration file with the following
-# content:
-#
-# [mysqladmin]
-# password = <secret>
-# user= root
-#
-# where "<secret>" is the password.
-#
-# ATTENTION: This /root/.my.cnf should be readable ONLY
-# for root !
+# log-error=@LOG_LOCATION@
-@localstatedir@/mysqld.log {
- # create 600 mysql mysql
+@LOG_LOCATION@ {
+ create 600 mysql mysql
notifempty
daily
rotate 3
@@ -27,11 +14,9 @@
compress
postrotate
# just if mariadbd is really running
- if test -x @bindir@/mysqladmin && \
- @bindir@/mysqladmin ping &>/dev/null
- then
- @bindir@/mysqladmin --local flush-error-log \
- flush-engine-log flush-general-log flush-slow-log
- fi
+ if [ -e @PID_FILE_DIR@/@DAEMON_NO_PREFIX@.pid ]
+ then
+ kill -1 $(<@PID_FILE_DIR@/@DAEMON_NO_PREFIX@.pid)
+ fi
endscript
}

View File

@ -0,0 +1,31 @@
--- mariadb-10.4.14/support-files/CMakeLists.txt 2020-08-06 17:28:28.000000000 +0200
+++ mariadb-10.4.14/support-files/CMakeLists.txt_patched 2020-09-03 13:21:07.826658279 +0200
@@ -187,6 +187,7 @@ IF(UNIX)
COMPONENT SharedLibraries)
INSTALL(FILES rpm/mysql-clients.cnf DESTINATION ${INSTALL_SYSCONF2DIR}
COMPONENT Client)
+ CONFIGURE_FILE(rpm/server.cnf ${CMAKE_CURRENT_SOURCE_DIR}/rpm/server.cnf @ONLY)
INSTALL(FILES rpm/server.cnf DESTINATION ${INSTALL_SYSCONF2DIR}
COMPONENT IniFiles)
INSTALL(FILES rpm/enable_encryption.preset DESTINATION ${INSTALL_SYSCONF2DIR}
diff -up mariadb-10.0.15/support-files/rpm/server.cnf.ownsetup mariadb-10.0.15/support-files/rpm/server.cnf
--- mariadb-10.0.15/support-files/rpm/server.cnf.ownsetup 2015-01-24 23:55:55.110063592 +0100
+++ mariadb-10.0.15/support-files/rpm/server.cnf 2015-01-24 23:57:42.308114387 +0100
@@ -9,7 +9,16 @@
[server]
# this is only for the mysqld standalone daemon
+# Settings user and group are ignored when systemd is used.
+# If you need to run mysqld under a different user or group,
+# customize your systemd unit file for mysqld/mariadb according to the
+# instructions in http://fedoraproject.org/wiki/Systemd
[mysqld]
+datadir=@MYSQL_DATADIR@
+socket=@MYSQL_UNIX_ADDR@
+log-error=@LOG_LOCATION@
+pid-file=@PID_FILE_DIR@/@DAEMON_NO_PREFIX@.pid
+
#
# * Galera-related settings

View File

@ -0,0 +1,19 @@
Use PCDIR CMake option, if configured
Upstream install the server pkgconfig file into arch-independent directory
Reported to upstream as: https://jira.mariadb.org/browse/MDEV-14340
--- mariadb-10.5.5/support-files/CMakeLists.txt.old 2020-09-30 10:36:08.582490318 +0200
+++ mariadb-10.5.5/support-files/CMakeLists.txt 2020-09-30 10:38:58.079710848 +0200
@@ -91,7 +91,11 @@
ENDIF()
CONFIGURE_FILE(mariadb.pc.in ${CMAKE_CURRENT_BINARY_DIR}/mariadb.pc @ONLY)
+IF(INSTALL_PCDIR)
+ INSTALL(FILES ${CMAKE_CURRENT_BINARY_DIR}/mariadb.pc DESTINATION ${INSTALL_PCDIR} COMPONENT Development)
+ELSE()
INSTALL(FILES ${CMAKE_CURRENT_BINARY_DIR}/mariadb.pc DESTINATION ${INSTALL_LIBDIR}/pkgconfig COMPONENT Development)
+ENDIF()
INSTALL(FILES mysql.m4 DESTINATION ${INSTALL_SHAREDIR}/aclocal COMPONENT Development)

View File

@ -0,0 +1,41 @@
We have some downstream patches and other scripts that include variables to
be expanded by cmake. Cmake needs to know about them, so adding them manually.
# Install libgcc as mylibgcc.a
--- mariadb-10.5.5/scripts/CMakeLists.txt.old 2020-09-24 10:13:35.272589689 +0200
+++ mariadb-10.5.5/scripts/CMakeLists.txt 2020-09-24 10:17:31.428985798 +0200
@@ -377,6 +377,34 @@
INSTALL_LINK(${file} ${binname} ${INSTALL_BINDIR} ${${file}_COMPONENT})
ENDIF()
ENDFOREACH()
+
+ # files for systemd
+ SET(SYSTEMD_SCRIPTS
+ mysql.tmpfiles.d
+ mysql.service
+ mysql@.service
+ mysql-prepare-db-dir
+ mysql-check-socket
+ mysql-check-upgrade
+ mysql-scripts-common
+ mysql_config_multilib
+ clustercheck
+ galera_new_cluster
+ my.cnf
+ )
+ FOREACH(file ${SYSTEMD_SCRIPTS})
+ IF(EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/${file}.sh)
+ CONFIGURE_FILE(${CMAKE_CURRENT_SOURCE_DIR}/${file}.sh
+ ${CMAKE_CURRENT_BINARY_DIR}/${file} ESCAPE_QUOTES @ONLY)
+ ELSEIF(EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/${file}.in)
+ CONFIGURE_FILE(${CMAKE_CURRENT_SOURCE_DIR}/${file}.in
+ ${CMAKE_CURRENT_BINARY_DIR}/${file} ESCAPE_QUOTES @ONLY)
+ ELSE()
+ MESSAGE(FATAL_ERROR "Can not find ${file}.sh or ${file}.in in "
+ "${CMAKE_CURRENT_SOURCE_DIR}" )
+ ENDIF()
+ ENDFOREACH()
+
ENDIF()
# Install libgcc as mylibgcc.a

View File

@ -0,0 +1,23 @@
module mariadb-server-galera 1.0;
require {
type mysqld_t;
type rsync_exec_t;
type anon_inodefs_t;
type proc_net_t;
type kerberos_port_t;
class file { read execute execute_no_trans getattr open };
class tcp_socket { name_bind name_connect };
class process { setpgid siginh rlimitinh noatsecure };
}
# allow mysqld to run rsyncd
allow mysqld_t self:process setpgid;
allow mysqld_t rsync_exec_t:file { read execute execute_no_trans getattr open };
allow mysqld_t anon_inodefs_t:file getattr;
allow mysqld_t proc_net_t:file { read open };
# allow rsyncd to listen on port 4444
allow mysqld_t kerberos_port_t:tcp_socket { name_bind name_connect };

File diff suppressed because it is too large Load Diff

View File

@ -0,0 +1,13 @@
diff -up mariadb-10.3.9/mysql-test/main/ssl_cipher.test.fixtest mariadb-10.3.9/mysql-test/main/ssl_cipher.test
--- mariadb-10.3.13/mysql-test/main/ssl_cipher.test 2019-02-20 08:59:09.000000000 +0100
+++ mariadb-10.3.13/mysql-test/main/ssl_cipher.test_patched 2019-02-22 11:22:01.250256060 +0100
@@ -97,7 +97,9 @@ drop user mysqltest_1@localhost;
let $restart_parameters=--ssl-cipher=AES128-SHA;
source include/restart_mysqld.inc;
connect (ssl_con,localhost,root,,,,,SSL);
+--replace_regex /TLS_AES_.*/AES128-SHA/
SHOW STATUS LIKE 'Ssl_cipher';
+--replace_regex /TLS_AES_.*/AES128-SHA/
SHOW STATUS LIKE 'Ssl_cipher_list';
disconnect ssl_con;
connection default;

18
SOURCES/my.cnf.in Normal file
View File

@ -0,0 +1,18 @@
#
# This group is read both both by the client and the server
# use it for options that affect everything
#
[client-server]
#
# This group is read by the server
#
[mysqld]
# Disabling symbolic-links is recommended to prevent assorted security risks
symbolic-links=0
#
# include all files from the config directory
#
!includedir @INSTALL_SYSCONF2DIR@

View File

@ -0,0 +1,39 @@
#!/bin/sh
# We check if there is already a process using the socket file,
# since otherwise the systemd service file could report false
# positive result when starting and mysqld_safe could remove
# a socket file, which is actually being used by a different daemon.
source "`dirname ${BASH_SOURCE[0]}`/mysql-scripts-common"
if test -e "$socketfile" ; then
echo "Socket file $socketfile exists." >&2
# no write permissions
if ! test -w "$socketfile" ; then
echo "Not enough permission to write to the socket file $socketfile, which is suspicious." >&2
echo "Please, remove $socketfile manually to start the service." >&2
exit 1
fi
# not a socket file
if ! test -S "$socketfile" ; then
echo "The file $socketfile is not a socket file, which is suspicious." >&2
echo "Please, remove $socketfile manually to start the service." >&2
exit 1
fi
# some process uses the socket file
response=`@bindir@/mysqladmin --no-defaults --socket="$socketfile" --user=UNKNOWN_MYSQL_USER --connect-timeout="${CHECKSOCKETTIMEOUT:-10}" ping 2>&1`
if [ $? -eq 0 ] || echo "$response" | grep -q "Access denied for user" ; then
echo "Is another MySQL daemon already running with the same unix socket?" >&2
echo "Please, stop the process using the socket $socketfile or remove the file manually to start the service." >&2
exit 1
fi
# socket file is a garbage
echo "No process is using $socketfile, which means it is a garbage, so it will be removed automatically." >&2
fi
exit 0

View File

@ -0,0 +1,39 @@
#!/bin/sh
source "`dirname ${BASH_SOURCE[0]}`/mysql-scripts-common"
upgrade_info_file="$datadir/mysql_upgrade_info"
version=0
# get version as integer from mysql_upgrade_info file
if [ -f "$upgrade_info_file" ] && [ -r "$upgrade_info_file" ] ; then
version_major=$(cat "$upgrade_info_file" | head -n 1 | sed -e 's/\([0-9]*\)\.\([0-9]*\)\..*$/\1/')
version_minor=$(cat "$upgrade_info_file" | head -n 1 | sed -e 's/\([0-9]*\)\.\([0-9]*\)\..*$/\2/')
if [[ $version_major =~ ^[0-9]+$ ]] && [[ $version_minor =~ ^[0-9]+$ ]] ; then
version=$((version_major*100+version_minor))
fi
fi
# compute current version as integer
thisversion=$((@MAJOR_VERSION@*100+@MINOR_VERSION@))
# provide warning in cases we should run mysql_upgrade
if [ $version -ne $thisversion ] ; then
# give extra warning if some version seems to be skipped
if [ $version -gt 0 ] && [ $version -lt 505 ] ; then
echo "The datadir located at $datadir seems to be older than of a version 5.5. Please, mind that as a general rule, to upgrade from one release series to another, go to the next series rather than skipping a series." >&2
fi
cat <<EOF >&2
The datadir located at $datadir needs to be upgraded using 'mysql_upgrade' tool. This can be done using the following steps:
1. Back-up your data before with 'mysql_upgrade'
2. Start the database daemon using 'service @DAEMON_NAME@ start'
3. Run 'mysql_upgrade' with a database user that has sufficient privileges
Read more about 'mysql_upgrade' usage at:
https://mariadb.com/kb/en/mariadb/documentation/sql-commands/table-commands/mysql_upgrade/
EOF
fi
exit 0

View File

@ -0,0 +1,137 @@
#!/bin/sh
# This script creates the mysql data directory during first service start.
# In subsequent starts, it does nothing much.
source "`dirname ${BASH_SOURCE[0]}`/mysql-scripts-common"
export LC_ALL=C
# Returns content of the specified directory
# If listing files fails, fake-file is returned so which means
# we'll behave like there was some data initialized
# Some files or directories are fine to be there, so those are
# explicitly removed from the listing
# @param <dir> datadir
list_datadir ()
{
( ls -1A "$1" 2>/dev/null || echo "fake-file" ) | grep -v \
-e '^lost+found$' \
-e '\.err$' \
-e '^.bash_history$'
}
# Checks whether datadir should be initialized
# @param <dir> datadir
should_initialize ()
{
test -z "$(list_datadir "$1")"
}
# If two args given first is user, second is group
# otherwise the arg is the systemd service file
if [ "$#" -eq 2 ]
then
myuser="$1"
mygroup="$2"
else
# Absorb configuration settings from the specified systemd service file,
# or the default service if not specified
SERVICE_NAME="$1"
if [ x"$SERVICE_NAME" = x ]
then
SERVICE_NAME=@DAEMON_NAME@.service
fi
myuser=`systemctl show -p User "${SERVICE_NAME}" |
sed 's/^User=//'`
if [ x"$myuser" = x ]
then
myuser=mysql
fi
mygroup=`systemctl show -p Group "${SERVICE_NAME}" |
sed 's/^Group=//'`
if [ x"$mygroup" = x ]
then
mygroup=mysql
fi
fi
# Set up the errlogfile with appropriate permissions
if [ ! -e "$errlogfile" -a ! -h "$errlogfile" -a x$(dirname "$errlogfile") = "x/var/log" ]; then
case $(basename "$errlogfile") in
mysql*.log|mariadb*.log) install /dev/null -m0640 -o$myuser -g$mygroup "$errlogfile" ;;
*) ;;
esac
else
# Provide some advice if the log file cannot be created by this script
errlogdir=$(dirname "$errlogfile")
if ! [ -d "$errlogdir" ] ; then
echo "The directory $errlogdir does not exist." >&2
exit 1
elif [ -e "$errlogfile" -a ! -w "$errlogfile" ] ; then
echo "The log file $errlogfile cannot be written, please, fix its permissions." >&2
echo "The daemon will be run under $myuser:$mygroup" >&2
exit 1
fi
fi
# Make the data directory if doesn't exist or empty
if should_initialize "$datadir" ; then
# First, make sure $datadir is there with correct permissions
# (note: if it's not, and we're not root, this'll fail ...)
if [ ! -e "$datadir" -a ! -h "$datadir" ]
then
mkdir -p "$datadir" || exit 1
fi
chown "$myuser:$mygroup" "$datadir"
chmod 0755 "$datadir"
[ -x /sbin/restorecon ] && /sbin/restorecon "$datadir"
# Now create the database
echo "Initializing @NICE_PROJECT_NAME@ database" >&2
# Avoiding deletion of files not created by mysql_install_db is
# guarded by time check and sleep should help work-arounded
# potential issues on systems with 1 second resolution timestamps
# https://bugzilla.redhat.com/show_bug.cgi?id=1335849#c19
INITDB_TIMESTAMP=`LANG=C date -u`
sleep 1
@bindir@/mysql_install_db --rpm --datadir="$datadir" --user="$myuser" --skip-test-db >&2
ret=$?
if [ $ret -ne 0 ] ; then
echo "Initialization of @NICE_PROJECT_NAME@ database failed." >&2
echo "Perhaps @sysconfdir@/my.cnf is misconfigured or there is some problem with permissions of $datadir." >&2
# Clean up any partially-created database files
if [ ! -e "$datadir/mysql/user.frm" ] && [ -d "$datadir" ] ; then
echo "Initialization of @NICE_PROJECT_NAME@ database was not finished successfully." >&2
echo "Files created so far will be removed." >&2
find "$datadir" -mindepth 1 -maxdepth 1 -newermt "$INITDB_TIMESTAMP" \
-not -name "lost+found" -exec rm -rf {} +
if [ $? -ne 0 ] ; then
echo "Removing of created files was not successfull." >&2
echo "Please, clean directory $datadir manually." >&2
fi
else
echo "However, part of data has been initialized and those will not be removed." >&2
echo "Please, clean directory $datadir manually." >&2
fi
exit $ret
fi
# upgrade does not need to be run on a fresh datadir
echo "@VERSION@-MariaDB" >"$datadir/mysql_upgrade_info"
else
if [ -d "$datadir/mysql/" ] ; then
# mysql dir exists, it seems data are initialized properly
echo "Database @NICE_PROJECT_NAME@ is probably initialized in $datadir already, nothing is done."
echo "If this is not the case, make sure the $datadir is empty before running `basename $0`."
else
# if the directory is not empty but mysql/ directory is missing, then
# print error and let user to initialize manually or empty the directory
echo "Database @NICE_PROJECT_NAME@ is not initialized, but the directory $datadir is not empty, so initialization cannot be done." >&2
echo "Make sure the $datadir is empty before running `basename $0`." >&2
exit 1
fi
fi
exit 0

View File

@ -0,0 +1,68 @@
#!/bin/sh
# Some useful functions used in other MySQL helper scripts
# This scripts defines variables datadir, errlogfile, socketfile
export LC_ALL=C
# extract value of a MySQL option from config files
# Usage: get_mysql_option VARNAME DEFAULT SECTION [ SECTION, ... ]
# result is returned in $result
# We use my_print_defaults which prints all options from multiple files,
# with the more specific ones later; hence take the last match.
get_mysql_option(){
if [ $# -ne 3 ] ; then
echo "get_mysql_option requires 3 arguments: section option default_value"
return
fi
sections="$1"
option_name="$2"
default_value="$3"
result=`@bindir@/my_print_defaults $my_print_defaults_extra_args $sections | sed -n "s/^--${option_name}=//p" | tail -n 1`
if [ -z "$result" ]; then
# not found, use default
result="${default_value}"
fi
}
# For the case of running more instances via systemd, scrits that source
# this file can get --default-group-suffix or similar option as the first
# argument. The utility my_print_defaults needs to use it as well, so the
# scripts sourcing this file work with the same options as the daemon.
my_print_defaults_extra_args=''
while echo "$1" | grep -q '^--defaults' ; do
my_print_defaults_extra_args="${my_print_defaults_extra_args} $1"
shift
done
# Defaults here had better match what mysqld_safe will default to
# The option values are generally defined on three important places
# on the default installation:
# 1) default values are hardcoded in the code of mysqld daemon or
# mysqld_safe script
# 2) configurable values are defined in @sysconfdir@/my.cnf
# 3) default values for helper scripts are specified bellow
# So, in case values are defined in my.cnf, we need to get that value.
# In case they are not defined in my.cnf, we need to get the same value
# in the daemon, as in the helper scripts. Thus, default values here
# must correspond with values defined in mysqld_safe script and source
# code itself.
server_sections="mysqld_safe mysqld server mysqld-@MAJOR_VERSION@.@MINOR_VERSION@ mariadb mariadb-@MAJOR_VERSION@.@MINOR_VERSION@ client-server"
get_mysql_option "$server_sections" datadir "@MYSQL_DATADIR@"
datadir="$result"
# if there is log_error in the my.cnf, my_print_defaults still
# returns log-error
# log-error might be defined in mysqld_safe and mysqld sections,
# the former has bigger priority
get_mysql_option "$server_sections" log-error "$datadir/`uname -n`.err"
errlogfile="$result"
get_mysql_option "$server_sections" socket "@MYSQL_UNIX_ADDR@"
socketfile="$result"
get_mysql_option "$server_sections" pid-file "$datadir/`uname -n`.pid"
pidfile="$result"

73
SOURCES/mysql.service.in Normal file
View File

@ -0,0 +1,73 @@
# It's not recommended to modify this file in-place, because it will be
# overwritten during package upgrades. If you want to customize, the
# best way is to create a file "/etc/systemd/system/@DAEMON_NAME@.service",
# containing
# .include /usr/lib/systemd/system/@DAEMON_NAME@.service
# ...make your changes here...
# or create a file "/etc/systemd/system/@DAEMON_NAME@.service.d/foo.conf",
# which doesn't need to include ".include" call and which will be parsed
# after the file @DAEMON_NAME@.service itself is parsed.
#
# For more info about custom unit files, see systemd.unit(5) or
# http://fedoraproject.org/wiki/Systemd#How_do_I_customize_a_unit_file.2F_add_a_custom_unit_file.3F
# For example, if you want to increase mysql's open-files-limit to 10000,
# you need to increase systemd's LimitNOFILE setting, so create a file named
# "/etc/systemd/system/@DAEMON_NAME@.service.d/limits.conf" containing:
# [Service]
# LimitNOFILE=10000
# Note: /usr/lib/... is recommended in the .include line though /lib/...
# still works.
# Don't forget to reload systemd daemon after you change unit configuration:
# root> systemctl --system daemon-reload
# Use [mysqld.INSTANCENAME] as sections in my.cnf to configure this instance.
[Unit]
Description=@NICE_PROJECT_NAME@ @MAJOR_VERSION@.@MINOR_VERSION@ database server
Documentation=man:mysqld(8)
Documentation=https://mariadb.com/kb/en/library/systemd/
After=network.target
[Install]
WantedBy=multi-user.target
Alias=mysql.service
Alias=mysqld.service
[Service]
Type=notify
User=mysql
Group=mysql
ExecStartPre=@libexecdir@/mysql-check-socket
# '%n' expands to 'Full unit name'; man systemd.unit
ExecStartPre=@libexecdir@/mysql-prepare-db-dir %n
# MYSQLD_OPTS here is for users to set in /etc/systemd/system/@DAEMON_NAME@@.service.d/MY_SPECIAL.conf
# Note: we set --basedir to prevent probes that might trigger SELinux alarms,
# per bug #547485
ExecStart=@libexecdir@/mysqld --basedir=@prefix@ $MYSQLD_OPTS $_WSREP_NEW_CLUSTER
ExecStartPost=@libexecdir@/mysql-check-upgrade
# Setting this to true can break replication and the Type=notify settings
# See also bind-address mysqld option.
PrivateNetwork=false
KillMode=process
KillSignal=SIGTERM
# Don't want to see an automated SIGKILL ever
SendSIGKILL=no
# Restart crashed server only, on-failure would also restart, for example, when
# my.cnf contains unknown option
Restart=on-abort
RestartSec=5s
UMask=007
# Give a reasonable amount of time for the server to start up/shut down
TimeoutSec=300
# Place temp files in a secure directory, not /tmp
PrivateTmp=true

View File

@ -0,0 +1,3 @@
# Do not edit this file.
# To override this, put /etc/tmpfiles.d/mariadb.conf instead.
d @PID_FILE_DIR@ 0755 mysql mysql -

79
SOURCES/mysql@.service.in Normal file
View File

@ -0,0 +1,79 @@
# Multi instance version of mariadb. For if you run mutiple verions at once.
# Also used for @DAEMON_NAME@@bootstrap to bootstrap Galera.
#
# To use multi instance variant, use [mysqld.INSTANCENAME] as sections in my.cnf
# and start the service via:
# systemctl start @DAEMON_NAME@@{instancename}.server
#
# It's not recommended to modify this file in-place, because it will be
# overwritten during package upgrades. If you want to customize, the
# best way is to create a file "/etc/systemd/system/@DAEMON_NAME@.service",
# containing
# .include /usr/lib/systemd/system/@DAEMON_NAME@.service
# ...make your changes here...
# or create a file "/etc/systemd/system/@DAEMON_NAME@.service.d/foo.conf",
# which doesn't need to include ".include" call and which will be parsed
# after the file @DAEMON_NAME@.service itself is parsed.
#
# For more info about custom unit files, see systemd.unit(5) or
# http://fedoraproject.org/wiki/Systemd#How_do_I_customize_a_unit_file.2F_add_a_custom_unit_file.3F
# For example, if you want to increase mysql's open-files-limit to 10000,
# you need to increase systemd's LimitNOFILE setting, so create a file named
# "/etc/systemd/system/@DAEMON_NAME@.service.d/limits.conf" containing:
# [Service]
# LimitNOFILE=10000
# Note: /usr/lib/... is recommended in the .include line though /lib/...
# still works.
# Don't forget to reload systemd daemon after you change unit configuration:
# root> systemctl --system daemon-reload
# Use [mysqld.INSTANCENAME] as sections in my.cnf to configure this instance.
[Unit]
Description=@NICE_PROJECT_NAME@ @MAJOR_VERSION@.@MINOR_VERSION@ database server
Documentation=man:mysqld(8)
Documentation=https://mariadb.com/kb/en/library/systemd/
After=network.target
[Install]
WantedBy=multi-user.target
Alias=mysql.service
Alias=mysqld.service
[Service]
Type=notify
User=mysql
Group=mysql
ExecStartPre=@libexecdir@/mysql-check-socket --defaults-group-suffix=.%I
ExecStartPre=@libexecdir@/mysql-prepare-db-dir --defaults-group-suffix=.%I %n
# MYSQLD_OPTS here is for users to set in /etc/systemd/system/@DAEMON_NAME@@.service.d/MY_SPECIAL.conf
# Note: we set --basedir to prevent probes that might trigger SELinux alarms,
# per bug #547485
ExecStart=@libexecdir@/mysqld --defaults-group-suffix=.%I --basedir=@prefix@ $MYSQLD_OPTS $_WSREP_NEW_CLUSTER
ExecStartPost=@libexecdir@/mysql-check-upgrade --defaults-group-suffix=.%I
# Setting this to true can break replication and the Type=notify settings
# See also bind-address mysqld option.
PrivateNetwork=false
KillMode=process
KillSignal=SIGTERM
# Don't want to see an automated SIGKILL ever
SendSIGKILL=no
# Restart crashed server only, on-failure would also restart, for example, when
# my.cnf contains unknown option
Restart=on-abort
RestartSec=5s
UMask=007
# Give a reasonable amount of time for the server to start up/shut down
TimeoutSec=300
# Place temp files in a secure directory, not /tmp
PrivateTmp=true

View File

@ -0,0 +1,26 @@
#! /bin/sh
#
# Wrapper script for mysql_config to support multilib
#
# This command respects setarch
bits=$(rpm --eval %__isa_bits)
case $bits in
32|64) status=known ;;
*) status=unknown ;;
esac
if [ "$status" = "unknown" ] ; then
echo "$0: error: command 'rpm --eval %__isa_bits' returned unknown value: $bits"
exit 1
fi
if [ -x @bindir@/mysql_config-$bits ] ; then
@bindir@/mysql_config-$bits "$@"
else
echo "$0: error: needed binary: @bindir@/mysql_config-$bits is missing"
exit 1
fi

View File

@ -0,0 +1,2 @@
# Fails since 10.3.17, only on armv7hl
versioning.partition :

View File

@ -0,0 +1,54 @@
# The SSL test are failing correctly. Fro more explanation, see:
# https://jira.mariadb.org/browse/MDEV-8404?focusedCommentId=84275&page=com.atlassian.jira.plugin.system.issuetabpanels%3Acomment-tabpanel#comment-84275
main.ssl_7937 : #1399847
main.ssl_8k_key :
main.ssl_crl : #1399847
# ------------------------------
# Tests that fails because of 'Self Signed Certificate in the Certificate Chain'
perfschema.cnf_option :
rpl.rpl_row_img_blobs :
rpl.rpl_row_img_eng_min :
rpl.rpl_row_img_eng_noblob :
sys_vars.slave_parallel_threads_basic :
# ------------------------------
# Expected to fail, the plugin is not build with server, but 'mariadb-connector-c' instead
plugins.auth_ed25519 :
plugins.multiauth :
# ------------------------------
perfschema.nesting : #1399847
perfschema.socket_summary_by_instance_func : #1399847
perfschema.socket_summary_by_event_name_func :
# ------------------------------
# Fails since 10.1.12
innodb.innodb_defrag_binlog :
# Fails everywhere since 10.2.15
main.userstat :
# Fails everywhere since 10.4.11
main.events_bugs :
sys_vars.tcp_nodelay :
# Fails on i686
encryption.innodb-redo-badkey :
# Fails since 10.5.2
main.mysqld--help2 :
disks.disks :
disks.disks_notembedded :
# Fails since 10.5.3
main.mysqld--help-aria :
# Fails since 10.5.4
main.ssl_system_ca :
# Fails since 10.5.7
innodb.innodb_wl6326_big :
plugins.feedback_plugin_load :

View File

@ -0,0 +1,5 @@
# Fails on ppc64le since 10.4.12
oqgraph.social :
# Fails since 10.5.2
rh-skipped-tests-ppc.list :

View File

@ -0,0 +1,3 @@
# Fails since 10.5.2
perfschema.memory_aggregate_32bit :
period.overlaps :

2758
SPECS/mariadb.spec Normal file

File diff suppressed because it is too large Load Diff