lldpd/0001-client-add-range-restriction-for-tx-hold-and-interva.patch

From 7b9abb819337dd50583350105afbdc82302f00ff Mon Sep 17 00:00:00 2001
From: Hangbin Liu <liuhangbin@gmail.com>
Date: Wed, 10 Jul 2024 15:32:01 +0800
Subject: [PATCH 1/2] client: add range restriction for tx hold and interval

Based on IEEE 802.1AB(2016) 9.2.5. The valid range of tx hold is 1-100,
the valid range of tx interval is 1-3600.

Reported-by: Matt Lucius <malucius@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
---
 src/client/lldpcli.8.in | 15 ++++++++-------
 src/lib/atoms/config.c  | 13 +++++++++----
 2 files changed, 17 insertions(+), 11 deletions(-)

diff --git a/src/client/lldpcli.8.in b/src/client/lldpcli.8.in
index 74a07eb4b806..39f936d1ceae 100644
--- a/src/client/lldpcli.8.in
+++ b/src/client/lldpcli.8.in
@@ -555,8 +555,8 @@ Force port description to the provided string.
 .Cd lldp tx-interval Ar interval
 .Bd -ragged -offset XXXXXX
 Change transmit delay to the specified value in seconds. The transmit
-delay is the delay between two transmissions of LLDP PDU. The default
-value is 30 seconds. Note:
+delay is the delay between two transmissions of LLDP PDU. The valid range
+is 1 through 3600 in seconds. The default value is 30 seconds. Note:
 .Nm lldpd
 also starts another system based refresh timer on each port to detect
 changes such as a hostname. This is the value of the tx-interval
@@ -576,8 +576,8 @@ system capabilities and CPU speed.
 .Bd -ragged -offset XXXXXX
 Change transmit hold value to the specified value. This value is used
 to compute the TTL of transmitted packets which is the product of this
-value and of the transmit delay. The default value is 4 and therefore
-the default TTL is 120 seconds.
+value and of the transmit delay. The valid range is 1 through 100. The
+default value is 4 and therefore the default TTL is 120 seconds.
 .Ed
 
 .Cd configure
@@ -676,9 +676,10 @@ to shorten the interval between two LLDPDU.
 .Cd enable
 should enable LLDP-MED fast start while
 .Cd tx-interval
-specifies the interval between two LLDPDU in seconds. The default
-interval is 1 second. Once 4 LLDPDU have been sent, the fast start
-mechanism is disabled until a new neighbor is detected.
+specifies the interval between two LLDPDU in seconds. The valid interval
+range is 1 through 3600 in seconds. The default interval is 1 second. Once
+4 LLDPDU have been sent, the fast start mechanism is disabled until a new
+neighbor is detected.
 .Ed
 
 .Cd unconfigure med fast-start
diff --git a/src/lib/atoms/config.c b/src/lib/atoms/config.c
index 8a4af2e8d1cd..305b5861de6e 100644
--- a/src/lib/atoms/config.c
+++ b/src/lib/atoms/config.c
@@ -262,11 +262,13 @@ _lldpctl_atom_set_int_config(lldpctl_atom_t *atom, lldpctl_key_t key, long int v
 		break;
 	case lldpctl_k_config_tx_interval:
 		config.c_tx_interval = value * 1000;
-		if (value > 0) c->config->c_tx_interval = value * 1000;
+		if (value > 0 && value <= 3600 * 1000)
+			c->config->c_tx_interval = value * 1000;
 		break;
 	case lldpctl_k_config_tx_interval_ms:
 		config.c_tx_interval = value;
-		if (value > 0) c->config->c_tx_interval = value;
+		if (value > 0 && value <= 3600 * 1000)
+			c->config->c_tx_interval = value;
 		break;
 	case lldpctl_k_config_ifdescr_update:
 		config.c_set_ifdescr = c->config->c_set_ifdescr = value;
@@ -288,12 +290,15 @@ _lldpctl_atom_set_int_config(lldpctl_atom_t *atom, lldpctl_key_t key, long int v
 		config.c_enable_fast_start = c->config->c_enable_fast_start = value;
 		break;
 	case lldpctl_k_config_fast_start_interval:
-		config.c_tx_fast_interval = c->config->c_tx_fast_interval = value;
+		config.c_tx_fast_interval = value;
+		if (value > 0 && value <= 3600)
+			c->config->c_tx_fast_interval = value;
 		break;
 #endif
 	case lldpctl_k_config_tx_hold:
 		config.c_tx_hold = value;
-		if (value > 0) c->config->c_tx_hold = value;
+		if (value > 0 && value <= 100)
+			c->config->c_tx_hold = value;
 		break;
 	case lldpctl_k_config_max_neighbors:
 		config.c_max_neighbors = value;
-- 
2.46.0