# -*- rpm-spec -*- # This spec file assumes you are building on a Fedora or RHEL version # that's still supported by the vendor. It may work on other distros # or versions, but no effort will be made to ensure that going forward. %define min_rhel 8 %define min_fedora 33 %define arches_qemu_kvm %{ix86} x86_64 %{power64} %{arm} aarch64 s390x %if 0%{?rhel} %if 0%{?rhel} > 8 %define arches_qemu_kvm x86_64 aarch64 s390x %else %define arches_qemu_kvm x86_64 %{power64} aarch64 s390x %endif %endif %define arches_64bit x86_64 %{power64} aarch64 s390x riscv64 %define arches_x86 %{ix86} x86_64 %define arches_systemtap_64bit %{arches_64bit} %define arches_dmidecode %{arches_x86} %define arches_xen %{arches_x86} aarch64 %if 0%{?fedora} >= 36 %define arches_xen x86_64 aarch64 %endif %define arches_vbox %{arches_x86} %define arches_ceph %{arches_64bit} %define arches_zfs %{arches_x86} %{power64} %{arm} %define arches_numactl %{arches_x86} %{power64} aarch64 s390x %define arches_numad %{arches_x86} %{power64} aarch64 # The hypervisor drivers that run in libvirtd %define with_qemu 0%{!?_without_qemu:1} %define with_lxc 0%{!?_without_lxc:1} %define with_libxl 0%{!?_without_libxl:1} %define with_vbox 0%{!?_without_vbox:1} %ifarch %{arches_qemu_kvm} %define with_qemu_kvm %{with_qemu} %else %define with_qemu_kvm 0 %endif %define with_qemu_tcg %{with_qemu} # RHEL disables TCG on all architectures %if 0%{?rhel} %define with_qemu_tcg 0 %endif %if ! %{with_qemu_tcg} && ! %{with_qemu_kvm} %define with_qemu 0 %endif # Then the hypervisor drivers that run outside libvirtd, in libvirt.so %define with_openvz 0%{!?_without_openvz:1} %define with_vmware 0%{!?_without_vmware:1} %define with_esx 0%{!?_without_esx:1} %define with_hyperv 0%{!?_without_hyperv:1} # Then the secondary host drivers, which run inside libvirtd %define with_storage_rbd 0%{!?_without_storage_rbd:1} %define with_storage_gluster 0%{!?_without_storage_gluster:1} %if 0%{?rhel} # Glusterfs has been dropped in RHEL-9, and before that # was only enabled on arches where KVM exists %if 0%{?rhel} > 8 %define with_storage_gluster 0 %else %ifnarch %{arches_qemu_kvm} %define with_storage_gluster 0 %endif %endif %endif # Fedora has zfs-fuse %if 0%{?fedora} %define with_storage_zfs 0%{!?_without_storage_zfs:1} %else %define with_storage_zfs 0 %endif %define with_storage_iscsi_direct 0%{!?_without_storage_iscsi_direct:1} # libiscsi has been dropped in RHEL-9 %if 0%{?rhel} > 8 %define with_storage_iscsi_direct 0 %endif # Other optional features %define with_numactl 0%{!?_without_numactl:1} # A few optional bits off by default, we enable later %define with_fuse 0 %define with_sanlock 0 %define with_numad 0 %define with_firewalld_zone 0 %define with_netcf 0 %define with_libssh2 0 %define with_wireshark 0 %define with_libssh 0 %define with_dmidecode 0 # Finally set the OS / architecture specific special cases # Architecture-dependent features %ifnarch %{arches_xen} %define with_libxl 0 %endif %ifnarch %{arches_vbox} %define with_vbox 0 %endif %ifnarch %{arches_numactl} %define with_numactl 0 %endif %ifnarch %{arches_zfs} %define with_storage_zfs 0 %endif %ifnarch %{arches_ceph} %define with_storage_rbd 0 %endif # RHEL doesn't ship many hypervisor drivers %if 0%{?rhel} %define with_openvz 0 %define with_vbox 0 %define with_vmware 0 %define with_libxl 0 %define with_hyperv 0 %define with_vz 0 %define with_lxc 0 %endif %define with_firewalld_zone 0%{!?_without_firewalld_zone:1} %if (0%{?fedora} && 0%{?fedora} < 34) || (0%{?rhel} && 0%{?rhel} < 9) %define with_netcf 0%{!?_without_netcf:1} %endif # fuse is used to provide virtualized /proc for LXC %if %{with_lxc} %define with_fuse 0%{!?_without_fuse:1} %endif # Enable sanlock library for lock management with QEMU # Sanlock is available only on arches where kvm is available for RHEL %if 0%{?fedora} %define with_sanlock 0%{!?_without_sanlock:1} %endif %if 0%{?rhel} %ifarch %{arches_qemu_kvm} %define with_sanlock 0%{!?_without_sanlock:1} %endif %endif # Enable libssh2 transport for new enough distros %if 0%{?fedora} %define with_libssh2 0%{!?_without_libssh2:1} %endif # Enable wireshark plugins for all distros %define with_wireshark 0%{!?_without_wireshark:1} %define wireshark_plugindir %(pkg-config --variable plugindir wireshark)/epan # Enable libssh transport for all distros %define with_libssh 0%{!?_without_libssh:1} %if %{with_qemu} || %{with_lxc} # numad is used to manage the CPU and memory placement dynamically, # it's not available on many non-x86 architectures. %ifarch %{arches_numad} %define with_numad 0%{!?_without_numad:1} %endif %endif %ifarch %{arches_dmidecode} %define with_dmidecode 0%{!?_without_dmidecode:1} %endif %define with_modular_daemons 0 %if 0%{?fedora} >= 35 || 0%{?rhel} >= 9 %define with_modular_daemons 1 %endif # Force QEMU to run as non-root %define qemu_user qemu %define qemu_group qemu # Locations for QEMU data %define qemu_moddir %{_libdir}/qemu %define qemu_datadir %{_datadir}/qemu %define with_mingw 0 %if 0%{?fedora} %define with_mingw 0%{!?_without_mingw:1} %endif # RHEL releases provide stable tool chains and so it is safe to turn # compiler warning into errors without being worried about frequent # changes in reported warnings %if 0%{?rhel} %define enable_werror -Dwerror=true %else %define enable_werror -Dwerror=false -Dgit_werror=disabled %endif %define tls_priority "@LIBVIRT,SYSTEM" # libvirt 8.1.0 stops distributing any sysconfig files. # If the user has customized their sysconfig file, # the RPM upgrade path will rename it to .rpmsave # because the file is no longer managed by RPM. # To prevent a regression we rename it back after the # transaction to preserve the user's modifications %define libvirt_sysconfig_pre() \ for sc in %{?*} ; do \ test -f "%{_sysconfdir}/sysconfig/${sc}.rpmsave" || continue ; \ mv -v "%{_sysconfdir}/sysconfig/${sc}.rpmsave" "%{_sysconfdir}/sysconfig/${sc}.rpmsave.old" ; \ done \ %{nil} %define libvirt_sysconfig_posttrans() \ for sc in %{?*} ; do \ test -f "%{_sysconfdir}/sysconfig/${sc}.rpmsave" || continue ; \ mv -v "%{_sysconfdir}/sysconfig/${sc}.rpmsave" "%{_sysconfdir}/sysconfig/${sc}" ; \ done \ %{nil} Summary: Library providing a simple virtualization API Name: libvirt Version: 9.5.0 Release: 7%{?dist}%{?extra_release}.alma.1 License: GPL-2.0-or-later AND LGPL-2.1-only AND LGPL-2.1-or-later AND OFL-1.1 URL: https://libvirt.org/ %if %(echo %{version} | grep -q "\.0$"; echo $?) == 1 %define mainturl stable_updates/ %endif Source: https://download.libvirt.org/%{?mainturl}libvirt-%{version}.tar.xz Source1: symlinks Patch1: libvirt-nodedev-transient-mdev-update-on-nodeDeviceCreateXML.patch Patch2: libvirt-nodedev-refactor-mdevctl-thread-functions.patch Patch3: libvirt-nodedev-update-mdevs-from-the-mdevctl-thread.patch Patch4: libvirt-tests-remove-acpi-support-from-s390x-ccw-hotplug-tests.patch Patch5: libvirt-tests-add-capabilities-for-QEMU-8.1.0-on-s390x.patch Patch6: libvirt-qemu-add-run-with-async-teardown-capability.patch Patch7: libvirt-qemu-allow-use-of-async-teardown-in-domain.patch Patch8: libvirt-conf-domcaps-Add-async-teardown-domain-capability.patch Patch9: libvirt-qemu-S390-does-not-provide-physical-address-size.patch Patch10: libvirt-nodedev-report-mdev-persistence-properly.patch Patch11: libvirt-node_device-Don-t-leak-error-message-buffer-from-virMdevctlListDefined-Active.patch Patch12: libvirt-storage-Fix-returning-of-locked-objects-from-virStoragePoolObjListSearch.patch Patch13: libvirt-Revert-qemu_passt-Actually-use-logfd.patch Patch14: libvirt-Revert-qemu_passt-Precreate-passt-logfile.patch Patch15: libvirt-tests-Use-DO_TEST_CAPS_-_ABI_UPDATE-for-ppc64.patch Patch16: libvirt-tests-Switch-to-firmware-autoselection-for-hvf.patch Patch17: libvirt-tests-Use-virt-4.0-machine-type-for-aarch64.patch Patch18: libvirt-tests-Consistently-use-path-to-guest_VARS.fd.patch Patch19: libvirt-tests-Turn-abi-update.xml-into-a-symlink.patch Patch20: libvirt-tests-Rename-firmware-auto-efi-nvram-path.patch Patch21: libvirt-qemu-Fix-return-value-for-qemuFirmwareFillDomainLegacy.patch Patch22: libvirt-qemu-Fix-lookup-against-stateless-combined-pflash.patch Patch23: libvirt-tests-Add-some-more-DO_TEST-ABI_UPDATE-macros.patch Patch24: libvirt-tests-Add-more-tests-for-firmware-selection.patch Patch25: libvirt-tests-Update-firmware-descriptor-files.patch Patch26: libvirt-tests-Drop-tags-from-BIOS-firmware-descriptor.patch Patch27: libvirt-tests-Include-microvm-in-firmwaretest.patch Patch28: libvirt-qemu-Don-t-overwrite-NVRAM-template-for-legacy-firmware.patch Patch29: libvirt-qemu-Generate-NVRAM-path-in-more-cases.patch Patch30: libvirt-qemu-Filter-firmware-based-on-loader.readonly.patch Patch31: libvirt-qemu-Match-NVRAM-template-extension-for-new-domains.patch Patch32: libvirt-conf-Don-t-default-to-raw-format-for-loader-NVRAM.patch Patch33: libvirt-tests-Rename-firmware-auto-efi-format-loader-qcow2-nvram-path.patch Patch34: libvirt-tests-Reintroduce-firmware-auto-efi-format-mismatch.patch # Patches were taken from: # https://github.com/libvirt/libvirt/commit/cd2843f5463d93eee00fab31fe259ad1b5b27a27.patch Patch35: libvirt-util-use-stubDriverType-instead-of-just-stubDriver.patch # https://github.com/libvirt/libvirt/commit/1bb961797153a92a40a3c517114e4920c65672d4.patch Patch36: libvirt-util-add-stub-driver-name-to-virPCIDevice-object.patch # https://github.com/libvirt/libvirt/commit/222b66974e8256965c089fb0f244dc1e01f708e7.patch Patch37: libvirt-util-rename-virPCIDeviceGetDriverPathAndName.patch # https://github.com/libvirt/libvirt/commit/6ce071f6097d9e96892d5a6c7bd3040f43cc925b.patch Patch38: libvirt-util-permit-existing-binding-to-VFIO-variant-driver.patch # https://github.com/libvirt/libvirt/commit/2d9c9445b9cc093c870f101eb884ddeac3ae40f7.patch Patch39: libvirt-util-probe-stub-driver-from-within-function-that-binds-to-stub-driver.patch # https://github.com/libvirt/libvirt/commit/928296b044647fd3cbe409db6903afc791863a90.patch Patch40: libvirt-util-honor-stubDriverName-when-probing.patch # https://github.com/libvirt/libvirt/commit/24beaffec33efa3fa077d7b8596d97aa9a038a01.patch Patch41: libvirt-node_device-support-binding-other-drivers-with-virNodeDevice.patch # https://github.com/libvirt/libvirt/commit/10e8a518a05922d5592d1405054aed3195aebf06.patch Patch42: libvirt-qemu-turn-two-multiline-log-messages-into-single-line.patch # https://github.com/libvirt/libvirt/commit/bbfcf18f504b0eb165c0bbfe2f34b4e20d11c355.patch Patch43: libvirt-docs-update-description-of-virsh-nodedev-detach.patch Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-config-network = %{version}-%{release} Requires: libvirt-daemon-config-nwfilter = %{version}-%{release} %if %{with_libxl} Requires: libvirt-daemon-driver-libxl = %{version}-%{release} %endif %if %{with_lxc} Requires: libvirt-daemon-driver-lxc = %{version}-%{release} %endif %if %{with_qemu} Requires: libvirt-daemon-driver-qemu = %{version}-%{release} %endif # We had UML driver, but we've removed it. Obsoletes: libvirt-daemon-driver-uml <= 5.0.0 Obsoletes: libvirt-daemon-uml <= 5.0.0 %if %{with_vbox} Requires: libvirt-daemon-driver-vbox = %{version}-%{release} %endif Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-client = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} # All build-time requirements. Run-time requirements are # listed against each sub-RPM BuildRequires: python3-docutils BuildRequires: gcc BuildRequires: meson >= 0.56.0 BuildRequires: ninja-build BuildRequires: git BuildRequires: perl-interpreter BuildRequires: python3 %if %{with_libxl} BuildRequires: xen-devel %endif BuildRequires: glib2-devel >= 2.56 BuildRequires: libxml2-devel BuildRequires: libxslt BuildRequires: readline-devel BuildRequires: bash-completion >= 2.0 BuildRequires: gettext BuildRequires: libtasn1-devel BuildRequires: gnutls-devel BuildRequires: libattr-devel # For pool-build probing for existing pools BuildRequires: libblkid-devel >= 2.17 # for augparse, optionally used in testing BuildRequires: augeas BuildRequires: systemd-devel >= 185 BuildRequires: systemd-rpm-macros BuildRequires: libpciaccess-devel >= 0.10.9 BuildRequires: yajl-devel %if %{with_sanlock} BuildRequires: sanlock-devel >= 2.4 %endif BuildRequires: libpcap-devel >= 1.5.0 BuildRequires: libnl3-devel BuildRequires: libselinux-devel BuildRequires: iptables BuildRequires: ebtables BuildRequires: module-init-tools BuildRequires: cyrus-sasl-devel BuildRequires: polkit >= 0.112 # For mount/umount in FS driver BuildRequires: util-linux %if %{with_qemu} # For managing ACLs BuildRequires: libacl-devel # From QEMU RPMs, used by virstoragetest BuildRequires: /usr/bin/qemu-img %endif # For LVM drivers BuildRequires: lvm2 # For pool type=iscsi BuildRequires: iscsi-initiator-utils %if %{with_storage_iscsi_direct} # For pool type=iscsi-direct BuildRequires: libiscsi-devel %endif # For disk driver BuildRequires: parted-devel # For Multipath support BuildRequires: device-mapper-devel %if %{with_storage_rbd} BuildRequires: librados-devel BuildRequires: librbd-devel %endif %if %{with_storage_gluster} BuildRequires: glusterfs-api-devel >= 3.4.1 BuildRequires: glusterfs-devel >= 3.4.1 %endif %if %{with_numactl} # For QEMU/LXC numa info BuildRequires: numactl-devel %endif BuildRequires: libcap-ng-devel >= 0.5.0 %if %{with_fuse} BuildRequires: fuse-devel >= 2.8.6 %endif %if %{with_libssh2} BuildRequires: libssh2-devel >= 1.3.0 %endif %if %{with_netcf} BuildRequires: netcf-devel >= 0.2.2 %endif %if (0%{?fedora} >= 36) || (0%{?rhel} >= 9) BuildRequires: passt %endif %if %{with_esx} BuildRequires: libcurl-devel %endif %if %{with_hyperv} BuildRequires: libwsman-devel >= 2.6.3 %endif BuildRequires: audit-libs-devel # we need /usr/sbin/dtrace BuildRequires: systemtap-sdt-devel # For mount/umount in FS driver BuildRequires: util-linux # For showmount in FS driver (netfs discovery) BuildRequires: nfs-utils # Fedora build root suckage BuildRequires: gawk # For storage wiping with different algorithms BuildRequires: scrub %if %{with_numad} BuildRequires: numad %endif %if %{with_wireshark} BuildRequires: wireshark-devel %endif %if %{with_libssh} BuildRequires: libssh-devel >= 0.8.1 %endif BuildRequires: rpcgen BuildRequires: libtirpc-devel # Needed for the firewalld_reload macro %if %{with_firewalld_zone} BuildRequires: firewalld-filesystem %endif %if %{with_mingw} BuildRequires: mingw32-filesystem BuildRequires: mingw32-gcc BuildRequires: mingw32-binutils BuildRequires: mingw32-glib2 >= 2.48 BuildRequires: mingw32-libgpg-error BuildRequires: mingw32-libgcrypt BuildRequires: mingw32-gnutls BuildRequires: mingw32-gettext BuildRequires: mingw32-libxml2 BuildRequires: mingw32-portablexdr BuildRequires: mingw32-dlfcn BuildRequires: mingw32-libssh2 BuildRequires: mingw32-curl BuildRequires: mingw64-filesystem BuildRequires: mingw64-gcc BuildRequires: mingw64-binutils BuildRequires: mingw64-glib2 >= 2.48 BuildRequires: mingw64-libgpg-error BuildRequires: mingw64-libgcrypt BuildRequires: mingw64-gnutls BuildRequires: mingw64-gettext BuildRequires: mingw64-libxml2 BuildRequires: mingw64-portablexdr BuildRequires: mingw64-dlfcn BuildRequires: mingw64-libssh2 BuildRequires: mingw64-curl %endif %description Libvirt is a C toolkit to interact with the virtualization capabilities of recent versions of Linux (and other OSes). The main package includes the libvirtd server exporting the virtualization support. %package docs Summary: API reference and website documentation %description docs Includes the API reference for the libvirt C library, and a complete copy of the libvirt.org website documentation. %package daemon Summary: Server side daemon and supporting files for libvirt library # All runtime requirements for the libvirt package (runtime requrements # for subpackages are listed later in those subpackages) # The client side, i.e. shared libs are in a subpackage Requires: libvirt-libs = %{version}-%{release} Requires: libvirt-daemon-common = %{version}-%{release} Requires: libvirt-daemon-lock = %{version}-%{release} Requires: libvirt-daemon-plugin-lockd = %{version}-%{release} Requires: libvirt-daemon-log = %{version}-%{release} Requires: libvirt-daemon-proxy = %{version}-%{release} %description daemon Server side daemon required to manage the virtualization capabilities of recent versions of Linux. Requires a hypervisor specific sub-RPM for specific drivers. %package daemon-common Summary: Files and utilities used by daemons Requires: libvirt-libs = %{version}-%{release} # The libvirt-guests.sh script requires virsh from libvirt-client subpackage, # but not every deployment wants to use libvirt-guests service. Using # Recommends here will install libvirt-client by default (if available), but # RPM won't complain if the package is unavailable, masked, or removed later. Recommends: libvirt-client = %{version}-%{release} # for /sbin/ip Requires: iproute # for /sbin/tc Requires: iproute-tc Requires: polkit >= 0.112 %if %{with_dmidecode} # For virConnectGetSysinfo Requires: dmidecode %endif # For service management Requires(posttrans): /usr/bin/systemctl Requires(preun): /usr/bin/systemctl # libvirtd depends on 'messagebus' service Requires: dbus # For uid creation during pre Requires(pre): shadow-utils # Needed by /usr/libexec/libvirt-guests.sh script. %if 0%{?fedora} >= 37 Requires: gettext-runtime %else Requires: gettext %endif # Ensure smooth upgrades Obsoletes: libvirt-admin < 7.3.0 Provides: libvirt-admin = %{version}-%{release} Obsoletes: libvirt-bash-completion < 7.3.0 %description daemon-common Miscellaneous files and utilities used by other libvirt daemons %package daemon-lock Summary: Server side daemon for managing locks Requires: libvirt-libs = %{version}-%{release} %description daemon-lock Server side daemon used to manage locks held against virtual machine resources %package daemon-plugin-lockd Summary: lockd client plugin for virtlockd Requires: libvirt-libs = %{version}-%{release} Requires: libvirt-daemon-lock = %{version}-%{release} %description daemon-plugin-lockd A client-side plugin that implements disk locking using POSIX fcntl advisory locks via communication with the virtlockd daemon %package daemon-log Summary: Server side daemon for managing logs Requires: libvirt-libs = %{version}-%{release} %description daemon-log Server side daemon used to manage logs from virtual machine consoles %package daemon-proxy Summary: Server side daemon providing libvirtd proxy Requires: libvirt-libs = %{version}-%{release} # netcat is needed on the server side so that clients that have # libvirt < 6.9.0 can connect, but newer versions will prefer # virt-ssh-helper. Making this a Recommends means that it gets # installed by default, but can still be removed if compatibility # with old clients is not required Recommends: /usr/bin/nc %description daemon-proxy Server side daemon providing functionality previously provided by the monolithic libvirtd %package daemon-config-network Summary: Default configuration files for the libvirtd daemon Requires: libvirt-daemon-driver-network = %{version}-%{release} %description daemon-config-network Default configuration files for setting up NAT based networking %package daemon-config-nwfilter Summary: Network filter configuration files for the libvirtd daemon Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} %description daemon-config-nwfilter Network filter configuration files for cleaning guest traffic %package daemon-driver-network Summary: Network driver plugin for the libvirtd daemon Requires: libvirt-daemon-common = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: dnsmasq >= 2.41 Requires: iptables %description daemon-driver-network The network driver plugin for the libvirtd daemon, providing an implementation of the virtual network APIs using the Linux bridge capabilities. %package daemon-driver-nwfilter Summary: Nwfilter driver plugin for the libvirtd daemon Requires: libvirt-daemon-common = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: iptables Requires: ebtables %description daemon-driver-nwfilter The nwfilter driver plugin for the libvirtd daemon, providing an implementation of the firewall APIs using the ebtables, iptables and ip6tables capabilities %package daemon-driver-nodedev Summary: Nodedev driver plugin for the libvirtd daemon Requires: libvirt-daemon-common = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} # needed for device enumeration Requires: systemd >= 185 # For managing persistent mediated devices Requires: mdevctl # for modprobe of pci devices Requires: module-init-tools %description daemon-driver-nodedev The nodedev driver plugin for the libvirtd daemon, providing an implementation of the node device APIs using the udev capabilities. %package daemon-driver-interface Summary: Interface driver plugin for the libvirtd daemon Requires: libvirt-daemon-common = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} %if %{with_netcf} Requires: netcf-libs >= 0.2.2 %endif %description daemon-driver-interface The interface driver plugin for the libvirtd daemon, providing an implementation of the host network interface APIs. %package daemon-driver-secret Summary: Secret driver plugin for the libvirtd daemon Requires: libvirt-daemon-common = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} %description daemon-driver-secret The secret driver plugin for the libvirtd daemon, providing an implementation of the secret key APIs. %package daemon-driver-storage-core Summary: Storage driver plugin including base backends for the libvirtd daemon Requires: libvirt-daemon-common = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: nfs-utils # For mkfs Requires: util-linux %if %{with_qemu} # From QEMU RPMs Requires: /usr/bin/qemu-img %endif %if !%{with_storage_rbd} Obsoletes: libvirt-daemon-driver-storage-rbd < 5.2.0 %endif Obsoletes: libvirt-daemon-driver-storage-sheepdog < 8.8.0 %description daemon-driver-storage-core The storage driver plugin for the libvirtd daemon, providing an implementation of the storage APIs using files, local disks, LVM, SCSI, iSCSI, and multipath storage. %package daemon-driver-storage-logical Summary: Storage driver plugin for lvm volumes Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: lvm2 %description daemon-driver-storage-logical The storage driver backend adding implementation of the storage APIs for block volumes using lvm. %package daemon-driver-storage-disk Summary: Storage driver plugin for disk Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: parted Requires: device-mapper %description daemon-driver-storage-disk The storage driver backend adding implementation of the storage APIs for block volumes using the host disks. %package daemon-driver-storage-scsi Summary: Storage driver plugin for local scsi devices Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} %description daemon-driver-storage-scsi The storage driver backend adding implementation of the storage APIs for scsi host devices. %package daemon-driver-storage-iscsi Summary: Storage driver plugin for iscsi Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: iscsi-initiator-utils %description daemon-driver-storage-iscsi The storage driver backend adding implementation of the storage APIs for iscsi volumes using the host iscsi stack. %if %{with_storage_iscsi_direct} %package daemon-driver-storage-iscsi-direct Summary: Storage driver plugin for iscsi-direct Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} %description daemon-driver-storage-iscsi-direct The storage driver backend adding implementation of the storage APIs for iscsi volumes using libiscsi direct connection. %endif %package daemon-driver-storage-mpath Summary: Storage driver plugin for multipath volumes Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: device-mapper %description daemon-driver-storage-mpath The storage driver backend adding implementation of the storage APIs for multipath storage using device mapper. %if %{with_storage_gluster} %package daemon-driver-storage-gluster Summary: Storage driver plugin for gluster Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} %if 0%{?fedora} Requires: glusterfs-client >= 2.0.1 %endif %if (0%{?fedora} || 0%{?with_storage_gluster}) Requires: /usr/sbin/gluster %endif %description daemon-driver-storage-gluster The storage driver backend adding implementation of the storage APIs for gluster volumes using libgfapi. %endif %if %{with_storage_rbd} %package daemon-driver-storage-rbd Summary: Storage driver plugin for rbd Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} %description daemon-driver-storage-rbd The storage driver backend adding implementation of the storage APIs for rbd volumes using the ceph protocol. %endif %if %{with_storage_zfs} %package daemon-driver-storage-zfs Summary: Storage driver plugin for ZFS Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} # Support any conforming implementation of zfs Requires: /sbin/zfs Requires: /sbin/zpool %description daemon-driver-storage-zfs The storage driver backend adding implementation of the storage APIs for ZFS volumes. %endif %package daemon-driver-storage Summary: Storage driver plugin including all backends for the libvirtd daemon Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-daemon-driver-storage-disk = %{version}-%{release} Requires: libvirt-daemon-driver-storage-logical = %{version}-%{release} Requires: libvirt-daemon-driver-storage-scsi = %{version}-%{release} Requires: libvirt-daemon-driver-storage-iscsi = %{version}-%{release} Requires: libvirt-daemon-driver-storage-mpath = %{version}-%{release} %if %{with_storage_iscsi_direct} Requires: libvirt-daemon-driver-storage-iscsi-direct = %{version}-%{release} %endif %if %{with_storage_gluster} Requires: libvirt-daemon-driver-storage-gluster = %{version}-%{release} %endif %if %{with_storage_rbd} Requires: libvirt-daemon-driver-storage-rbd = %{version}-%{release} %endif %if %{with_storage_zfs} Requires: libvirt-daemon-driver-storage-zfs = %{version}-%{release} %endif %description daemon-driver-storage The storage driver plugin for the libvirtd daemon, providing an implementation of the storage APIs using LVM, iSCSI, parted and more. %if %{with_qemu} %package daemon-driver-qemu Summary: QEMU driver plugin for the libvirtd daemon Requires: libvirt-daemon-common = %{version}-%{release} Requires: libvirt-daemon-log = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: /usr/bin/qemu-img # For image compression Requires: gzip Requires: bzip2 Requires: lzop Requires: xz Requires: systemd-container Requires: swtpm-tools %if %{with_numad} Requires: numad %endif %if (0%{?fedora} >= 36) || (0%{?rhel} >= 9) Recommends: passt Recommends: passt-selinux %endif %description daemon-driver-qemu The qemu driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using QEMU %endif %if %{with_lxc} %package daemon-driver-lxc Summary: LXC driver plugin for the libvirtd daemon Requires: libvirt-daemon-common = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} # There really is a hard cross-driver dependency here Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: systemd-container # for modprobe of nbd driver Requires: module-init-tools %if %{with_numad} Requires: numad %endif %description daemon-driver-lxc The LXC driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using the Linux kernel %endif %if %{with_vbox} %package daemon-driver-vbox Summary: VirtualBox driver plugin for the libvirtd daemon Requires: libvirt-daemon-common = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} %description daemon-driver-vbox The vbox driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using VirtualBox %endif %if %{with_libxl} %package daemon-driver-libxl Summary: Libxl driver plugin for the libvirtd daemon Requires: libvirt-daemon-common = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Obsoletes: libvirt-daemon-driver-xen < 4.3.0 %description daemon-driver-libxl The Libxl driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using Libxl %endif %if %{with_qemu_tcg} %package daemon-qemu Summary: Server side daemon & driver required to run QEMU guests %if %{with_modular_daemons} Requires: libvirt-daemon-common = %{version}-%{release} Requires: libvirt-daemon-log = %{version}-%{release} Requires: libvirt-daemon-lock = %{version}-%{release} Requires: libvirt-daemon-plugin-lockd = %{version}-%{release} Requires: libvirt-daemon-proxy = %{version}-%{release} %else Requires: libvirt-daemon = %{version}-%{release} %endif Requires: libvirt-daemon-driver-qemu = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} Requires: qemu %description daemon-qemu Server side daemon and driver required to manage the virtualization capabilities of the QEMU TCG emulators %endif %if %{with_qemu_kvm} %package daemon-kvm Summary: Server side daemon & driver required to run KVM guests %if %{with_modular_daemons} Requires: libvirt-daemon-common = %{version}-%{release} Requires: libvirt-daemon-log = %{version}-%{release} Requires: libvirt-daemon-lock = %{version}-%{release} Requires: libvirt-daemon-plugin-lockd = %{version}-%{release} Requires: libvirt-daemon-proxy = %{version}-%{release} %else Requires: libvirt-daemon = %{version}-%{release} %endif Requires: libvirt-daemon-driver-qemu = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} Requires: qemu-kvm %description daemon-kvm Server side daemon and driver required to manage the virtualization capabilities of the KVM hypervisor %endif %if %{with_lxc} %package daemon-lxc Summary: Server side daemon & driver required to run LXC guests %if %{with_modular_daemons} Requires: libvirt-daemon-common = %{version}-%{release} Requires: libvirt-daemon-proxy = %{version}-%{release} %else Requires: libvirt-daemon = %{version}-%{release} %endif Requires: libvirt-daemon-driver-lxc = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} %description daemon-lxc Server side daemon and driver required to manage the virtualization capabilities of LXC %endif %if %{with_libxl} %package daemon-xen Summary: Server side daemon & driver required to run XEN guests %if %{with_modular_daemons} Requires: libvirt-daemon-common = %{version}-%{release} Requires: libvirt-daemon-lock = %{version}-%{release} Requires: libvirt-daemon-plugin-lockd = %{version}-%{release} Requires: libvirt-daemon-proxy = %{version}-%{release} %else Requires: libvirt-daemon = %{version}-%{release} %endif Requires: libvirt-daemon-driver-libxl = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} Requires: xen %description daemon-xen Server side daemon and driver required to manage the virtualization capabilities of XEN %endif %if %{with_vbox} %package daemon-vbox Summary: Server side daemon & driver required to run VirtualBox guests %if %{with_modular_daemons} Requires: libvirt-daemon-common = %{version}-%{release} Requires: libvirt-daemon-proxy = %{version}-%{release} %else Requires: libvirt-daemon = %{version}-%{release} %endif Requires: libvirt-daemon-driver-vbox = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} %description daemon-vbox Server side daemon and driver required to manage the virtualization capabilities of VirtualBox %endif %package client Summary: Client side utilities of the libvirt library Requires: libvirt-libs = %{version}-%{release} # Needed by virt-pki-validate script. Requires: gnutls-utils # Ensure smooth upgrades Obsoletes: libvirt-bash-completion < 7.3.0 %description client The client binaries needed to access the virtualization capabilities of recent versions of Linux (and other OSes). %package client-qemu Summary: Additional client side utilities for QEMU Requires: libvirt-libs = %{version}-%{release} Requires: python3-libvirt >= 3.7.0 Requires: python3-cryptography Requires: python3-lxml %description client-qemu The additional client binaries are used to interact with some QEMU specific features of libvirt. %package libs Summary: Client side libraries # So remote clients can access libvirt over SSH tunnel Requires: cyrus-sasl # Needed by default sasl.conf - no onerous extra deps, since # 100's of other things on a system already pull in krb5-libs Requires: cyrus-sasl-gssapi %description libs Shared libraries for accessing the libvirt daemon. %if %{with_wireshark} %package wireshark Summary: Wireshark dissector plugin for libvirt RPC transactions Requires: wireshark Requires: libvirt-libs = %{version}-%{release} %description wireshark Wireshark dissector plugin for better analysis of libvirt RPC traffic. %endif %if %{with_lxc} %package login-shell Summary: Login shell for connecting users to an LXC container Requires: libvirt-libs = %{version}-%{release} %description login-shell Provides the set-uid virt-login-shell binary that is used to connect a user to an LXC container when they login, by switching namespaces. %endif %package devel Summary: Libraries, includes, etc. to compile with the libvirt library Requires: libvirt-libs = %{version}-%{release} Requires: pkgconfig %description devel Include header files & development libraries for the libvirt C library. %if %{with_sanlock} %package daemon-plugin-sanlock Summary: Sanlock lock manager plugin for QEMU driver Requires: sanlock >= 2.4 #for virt-sanlock-cleanup require augeas Requires: augeas Requires: libvirt-libs = %{version}-%{release} Obsoletes: libvirt-lock-sanlock < 9.1.0 Provides: libvirt-lock-sanlock = %{version}-%{release} %description daemon-plugin-sanlock Includes the Sanlock lock manager plugin for the QEMU driver %endif %package nss Summary: Libvirt plugin for Name Service Switch Requires: libvirt-daemon-driver-network = %{version}-%{release} %description nss Libvirt plugin for NSS for translating domain names into IP addresses. %if %{with_mingw} %package -n mingw32-libvirt Summary: %{summary} Obsoletes: mingw32-libvirt-static < 7.0.0 BuildArch: noarch %description -n mingw32-libvirt MinGW Windows libvirt virtualization library. %package -n mingw64-libvirt Summary: %{summary} Obsoletes: mingw64-libvirt-static < 7.0.0 BuildArch: noarch %description -n mingw64-libvirt MinGW Windows libvirt virtualization library. %{?mingw_debug_package} %endif %prep %autosetup -S git_am -N # "make dist" replaces all symlinks with a copy of the linked files; # we need to replace all of them with the original symlinks echo "Restoring symlinks" while read lnk target; do if [ -e $lnk ]; then rm -rf $lnk ln -s $target $lnk fi done <%{_sourcedir}/symlinks || exit 1 git add . git commit -q -a --allow-empty --author 'rpm-build ' -m symlinks git config gc.auto 0 %autopatch %build %if 0%{?fedora} >= %{min_fedora} || 0%{?rhel} >= %{min_rhel} %define supported_platform 1 %else %define supported_platform 0 %endif %if ! %{supported_platform} echo "This RPM requires either Fedora >= %{min_fedora} or RHEL >= %{min_rhel}" exit 1 %endif %if %{with_qemu} %define arg_qemu -Ddriver_qemu=enabled %else %define arg_qemu -Ddriver_qemu=disabled %endif %if %{with_openvz} %define arg_openvz -Ddriver_openvz=enabled %else %define arg_openvz -Ddriver_openvz=disabled %endif %if %{with_lxc} %define arg_lxc -Ddriver_lxc=enabled %define arg_login_shell -Dlogin_shell=enabled %else %define arg_lxc -Ddriver_lxc=disabled %define arg_login_shell -Dlogin_shell=disabled %endif %if %{with_vbox} %define arg_vbox -Ddriver_vbox=enabled %else %define arg_vbox -Ddriver_vbox=disabled %endif %if %{with_libxl} %define arg_libxl -Ddriver_libxl=enabled %else %define arg_libxl -Ddriver_libxl=disabled %endif %if %{with_esx} %define arg_esx -Ddriver_esx=enabled -Dcurl=enabled %else %define arg_esx -Ddriver_esx=disabled -Dcurl=disabled %endif %if %{with_hyperv} %define arg_hyperv -Ddriver_hyperv=enabled -Dopenwsman=enabled %else %define arg_hyperv -Ddriver_hyperv=disabled -Dopenwsman=disabled %endif %if %{with_vmware} %define arg_vmware -Ddriver_vmware=enabled %else %define arg_vmware -Ddriver_vmware=disabled %endif %if %{with_storage_rbd} %define arg_storage_rbd -Dstorage_rbd=enabled %else %define arg_storage_rbd -Dstorage_rbd=disabled %endif %if %{with_storage_gluster} %define arg_storage_gluster -Dstorage_gluster=enabled -Dglusterfs=enabled %else %define arg_storage_gluster -Dstorage_gluster=disabled -Dglusterfs=disabled %endif %if %{with_storage_zfs} %define arg_storage_zfs -Dstorage_zfs=enabled %else %define arg_storage_zfs -Dstorage_zfs=disabled %endif %if %{with_numactl} %define arg_numactl -Dnumactl=enabled %else %define arg_numactl -Dnumactl=disabled %endif %if %{with_numad} %define arg_numad -Dnumad=enabled %else %define arg_numad -Dnumad=disabled %endif %if %{with_fuse} %define arg_fuse -Dfuse=enabled %else %define arg_fuse -Dfuse=disabled %endif %if %{with_sanlock} %define arg_sanlock -Dsanlock=enabled %else %define arg_sanlock -Dsanlock=disabled %endif %if %{with_firewalld_zone} %define arg_firewalld_zone -Dfirewalld_zone=enabled %else %define arg_firewalld_zone -Dfirewalld_zone=disabled %endif %if %{with_netcf} %define arg_netcf -Dnetcf=enabled %else %define arg_netcf -Dnetcf=disabled %endif %if %{with_wireshark} %define arg_wireshark -Dwireshark_dissector=enabled %else %define arg_wireshark -Dwireshark_dissector=disabled %endif %if %{with_storage_iscsi_direct} %define arg_storage_iscsi_direct -Dstorage_iscsi_direct=enabled -Dlibiscsi=enabled %else %define arg_storage_iscsi_direct -Dstorage_iscsi_direct=disabled -Dlibiscsi=disabled %endif %if %{with_libssh} %define arg_libssh -Dlibssh=enabled %else %define arg_libssh -Dlibssh=disabled %endif %if %{with_libssh2} %define arg_libssh2 -Dlibssh2=enabled %else %define arg_libssh2 -Dlibssh2=disabled %endif %if %{with_modular_daemons} %define arg_remote_mode -Dremote_default_mode=direct %else %define arg_remote_mode -Dremote_default_mode=legacy %endif %define when %(date +"%%F-%%T") %define where %(hostname) %define who %{?packager}%{!?packager:Unknown} %define arg_packager -Dpackager="%{who}, %{when}, %{where}" %define arg_packager_version -Dpackager_version="%{release}" %define arg_selinux_mount -Dselinux_mount="/sys/fs/selinux" # place macros above and build commands below this comment export SOURCE_DATE_EPOCH=$(stat --printf='%Y' %{_specdir}/libvirt.spec) %meson \ -Drunstatedir=%{_rundir} \ -Dinitconfdir=%{_sysconfdir}/sysconfig \ %{?arg_qemu} \ %{?arg_openvz} \ %{?arg_lxc} \ %{?arg_vbox} \ %{?arg_libxl} \ -Dsasl=enabled \ -Dpolkit=enabled \ -Ddriver_libvirtd=enabled \ -Ddriver_remote=enabled \ -Ddriver_test=enabled \ %{?arg_esx} \ %{?arg_hyperv} \ %{?arg_vmware} \ -Ddriver_vz=disabled \ -Ddriver_bhyve=disabled \ -Ddriver_ch=disabled \ %{?arg_remote_mode} \ -Ddriver_interface=enabled \ -Ddriver_network=enabled \ -Dstorage_fs=enabled \ -Dstorage_lvm=enabled \ -Dstorage_iscsi=enabled \ %{?arg_storage_iscsi_direct} \ -Dstorage_scsi=enabled \ -Dstorage_disk=enabled \ -Dstorage_mpath=enabled \ %{?arg_storage_rbd} \ %{?arg_storage_gluster} \ %{?arg_storage_zfs} \ -Dstorage_vstorage=disabled \ %{?arg_numactl} \ %{?arg_numad} \ -Dcapng=enabled \ %{?arg_fuse} \ %{?arg_netcf} \ -Dselinux=enabled \ %{?arg_selinux_mount} \ -Dapparmor=disabled \ -Dapparmor_profiles=disabled \ -Dsecdriver_apparmor=disabled \ -Dudev=enabled \ -Dyajl=enabled \ %{?arg_sanlock} \ -Dlibpcap=enabled \ -Dlibnl=enabled \ -Daudit=enabled \ -Ddtrace=enabled \ -Dfirewalld=enabled \ %{?arg_firewalld_zone} \ %{?arg_wireshark} \ %{?arg_libssh} \ %{?arg_libssh2} \ -Dpm_utils=disabled \ -Dnss=enabled \ %{arg_packager} \ %{arg_packager_version} \ -Dqemu_user=%{qemu_user} \ -Dqemu_group=%{qemu_group} \ -Dqemu_moddir=%{qemu_moddir} \ -Dqemu_datadir=%{qemu_datadir} \ -Dtls_priority=%{tls_priority} \ %{?enable_werror} \ -Dexpensive_tests=enabled \ -Dinit_script=systemd \ -Ddocs=enabled \ -Dtests=enabled \ -Drpath=disabled \ %{?arg_login_shell} %meson_build %if %{with_mingw} %mingw_meson \ --auto-features=enabled \ -Ddriver_remote=enabled \ -Ddriver_test=enabled \ -Ddriver_esx=enabled \ -Dcurl=enabled \ -Ddocs=enabled \ -Dapparmor=disabled \ -Dapparmor_profiles=disabled \ -Dattr=disabled \ -Daudit=disabled \ -Dbash_completion=disabled \ -Dblkid=disabled \ -Dcapng=disabled \ -Ddriver_bhyve=disabled \ -Ddriver_hyperv=disabled \ -Ddriver_interface=disabled \ -Ddriver_libvirtd=disabled \ -Ddriver_libxl=disabled \ -Ddriver_lxc=disabled \ -Ddriver_network=disabled \ -Ddriver_openvz=disabled \ -Ddriver_qemu=disabled \ -Ddriver_secrets=disabled \ -Ddriver_vbox=disabled \ -Ddriver_vmware=disabled \ -Ddriver_vz=disabled \ -Ddtrace=disabled \ -Dexpensive_tests=enabled \ -Dfirewalld=disabled \ -Dfirewalld_zone=disabled \ -Dfuse=disabled \ -Dglusterfs=disabled \ -Dhost_validate=disabled \ -Dlibiscsi=disabled \ -Dlibnl=disabled \ -Dlibpcap=disabled \ -Dlibssh2=disabled \ -Dlibssh=disabled \ -Dlogin_shell=disabled \ -Dnetcf=disabled \ -Dnls=disabled \ -Dnss=disabled \ -Dnumactl=disabled \ -Dnumad=disabled \ -Dopenwsman=disabled \ -Dpciaccess=disabled \ -Dpm_utils=disabled \ -Dpolkit=disabled \ -Dreadline=disabled \ -Drpath=disabled \ -Dsanlock=disabled \ -Dsasl=disabled \ -Dsecdriver_apparmor=disabled \ -Dsecdriver_selinux=disabled \ -Dselinux=disabled \ -Dstorage_dir=disabled \ -Dstorage_disk=disabled \ -Dstorage_fs=disabled \ -Dstorage_gluster=disabled \ -Dstorage_iscsi_direct=disabled \ -Dstorage_iscsi=disabled \ -Dstorage_lvm=disabled \ -Dstorage_mpath=disabled \ -Dstorage_rbd=disabled \ -Dstorage_scsi=disabled \ -Dstorage_vstorage=disabled \ -Dstorage_zfs=disabled \ -Dsysctl_config=disabled \ -Dtests=disabled \ -Dudev=disabled \ -Dwireshark_dissector=disabled \ -Dyajl=disabled %mingw_ninja %endif %install rm -fr %{buildroot} export SOURCE_DATE_EPOCH=$(stat --printf='%Y' %{_specdir}/libvirt.spec) %meson_install # We don't want to install /etc/libvirt/qemu/networks in the main %%files list # because if the admin wants to delete the default network completely, we don't # want to end up re-incarnating it on every RPM upgrade. install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/ cp $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml \ $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml # libvirt saves this file with mode 0600 chmod 0600 $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml # nwfilter files are installed in /usr/share/libvirt and copied to /etc in %%post # to avoid verification errors on changed files in /etc install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/nwfilter/ cp -a $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/nwfilter/*.xml \ $RPM_BUILD_ROOT%{_datadir}/libvirt/nwfilter/ # libvirt saves these files with mode 600 chmod 600 $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/nwfilter/*.xml %if ! %{with_qemu} rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_qemu.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug %endif %find_lang %{name} %if ! %{with_sanlock} rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirt_sanlock.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug %endif %if ! %{with_lxc} rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_lxc.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug %endif %if ! %{with_qemu} rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu.conf rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.qemu %endif %if ! %{with_lxc} rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/lxc.conf rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.lxc %endif %if ! %{with_libxl} rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/libxl.conf rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.libxl rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_libxl.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_libxl.aug %endif # Copied into libvirt-docs subpackage eventually mv $RPM_BUILD_ROOT%{_datadir}/doc/libvirt libvirt-docs %ifarch %{arches_systemtap_64bit} mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes.stp \ $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes-64.stp %if %{with_qemu} mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes.stp \ $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes-64.stp %endif %endif %if %{with_mingw} %mingw_ninja_install rm -rf $RPM_BUILD_ROOT%{mingw32_sysconfdir}/libvirt/nwfilter rm -rf $RPM_BUILD_ROOT%{mingw64_sysconfdir}/libvirt/nwfilter rm -rf $RPM_BUILD_ROOT%{mingw32_datadir}/doc/* rm -rf $RPM_BUILD_ROOT%{mingw64_datadir}/doc/* rm -rf $RPM_BUILD_ROOT%{mingw32_datadir}/gtk-doc/* rm -rf $RPM_BUILD_ROOT%{mingw64_datadir}/gtk-doc/* rm -rf $RPM_BUILD_ROOT%{mingw32_libexecdir}/libvirt_iohelper.exe rm -rf $RPM_BUILD_ROOT%{mingw64_libexecdir}/libvirt_iohelper.exe rm -rf $RPM_BUILD_ROOT%{mingw32_libexecdir}/libvirt-guests.sh rm -rf $RPM_BUILD_ROOT%{mingw64_libexecdir}/libvirt-guests.sh %mingw_debug_install_post %mingw_find_lang %{name} %endif %check # Building on slow archs, like emulated s390x in Fedora copr, requires # raising the test timeout VIR_TEST_DEBUG=1 %meson_test --no-suite syntax-check --timeout-multiplier 10 %define libvirt_rpmstatedir %{_localstatedir}/lib/rpm-state/libvirt # Mark units such that presets will later be applied to them. Meant # to be called during %pre. Units that already exist on the system # will not be marked, with the assumption that presets have already # been applied at some point in the past. This makes it safe to call # this macro for all units each time %pre runs. %define libvirt_systemd_schedule_preset() \ mkdir -p %{libvirt_rpmstatedir} || : \ for unit in %{?*}; do \ if ! test -e %{_unitdir}/$unit; then \ touch %{libvirt_rpmstatedir}/preset-$unit || : \ fi \ done \ %{nil} # Apply presets for units that have previously been marked. Meant to # be called during %posttrans. Note that foo.service must be passed # as the first argument, before all the various foo*.socket # associated with it, for things to work correctly. This is necessary # because Also=foo.socket is usually present in foo.service's # [Install] section, and we want that configuration to take # precedence over foo.socket's own presets. %define libvirt_systemd_perform_preset() \ %{?7:%{error:Too many arguments}} \ for unit in %{?2} %{?3} %{?4} %{?5} %{?6} %1; do \ if test -e %{libvirt_rpmstatedir}/preset-$unit; then \ /usr/bin/systemctl --no-reload preset $unit || : \ fi \ rm -f %{libvirt_rpmstatedir}/preset-$unit \ done \ rmdir %{libvirt_rpmstatedir} 2>/dev/null || : \ %{nil} # Mark a single unit for restart. Meant to be called during %pre. %define libvirt_systemd_schedule_restart() \ mkdir -p %{libvirt_rpmstatedir} || : \ touch %{libvirt_rpmstatedir}/restart-%1 || : \ %{nil} # Restart a unit that was previously marked. Meant to be called # during %posttrans. If systemd is not running, no action will be # performed. %define libvirt_systemd_perform_restart() \ if test -d /run/systemd/system && \ test -e %{libvirt_rpmstatedir}/restart-%1; then \ /usr/bin/systemctl try-restart %1 >/dev/null 2>&1 || : \ fi \ rm -f %{libvirt_rpmstatedir}/restart-%1 \ rmdir %{libvirt_rpmstatedir} 2>/dev/null || : \ %{nil} # Mark a single unit for reload. Meant to be called during %pre. %define libvirt_systemd_schedule_reload() \ mkdir -p %{libvirt_rpmstatedir} || : \ touch %{libvirt_rpmstatedir}/reload-%1 || : \ %{nil} # Reload a unit that was previously marked. Meant to be called during # %posttrans. If systemd is not running, no action will be performed. %define libvirt_systemd_perform_reload() \ if test -d /run/systemd/system && \ test -e %{libvirt_rpmstatedir}/reload-%1; then \ /usr/bin/systemctl try-reload-or-restart %1 >/dev/null 2>&1 || : \ fi \ rm -f %{libvirt_rpmstatedir}/reload-%1 \ rmdir %{libvirt_rpmstatedir} 2>/dev/null || : \ %{nil} # Disable a single unit, optionally stopping it if systemd is # running. Meant to be called during %preun. %define libvirt_systemd_disable() \ if test -d /run/systemd/system; then \ /usr/bin/systemctl --no-reload disable --now %{?*} || : \ else \ /usr/bin/systemctl --no-reload disable %{?*} || : \ fi \ %{nil} # %pre implementation for services that should be restarted on # upgrade. Note that foo.service must be passed as the first # argument, before all the various foo*.socket associated with it. %define libvirt_systemd_restart_pre() \ %libvirt_systemd_schedule_preset %{?*} \ %libvirt_systemd_schedule_restart %1 \ %{nil} # %pre implementation for services that should be reloaded on # upgrade. Note that foo.service must be passed as the first # argument, before all the various foo*.socket associated with it. %define libvirt_systemd_reload_pre() \ %libvirt_systemd_schedule_preset %{?*} \ %libvirt_systemd_schedule_reload %1 \ %{nil} # %pre implementation for services that should be neither restarted # nor reloaded on upgrade. %define libvirt_systemd_noaction_pre() \ %libvirt_systemd_schedule_preset %{?*} \ %{nil} # %posttrans implementation for all services. We can use a single # macro to cover all scenarios, because each operation will only be # performed if it had previously been scheduled. Note that # foo.service must be passed as the first argument, before all the # various foo*.socket associated with it. %define libvirt_systemd_posttrans() \ %libvirt_systemd_perform_preset %{?*} \ %libvirt_systemd_perform_reload %1 \ %libvirt_systemd_perform_restart %1 \ %{nil} # %preun implementation for all services. %define libvirt_systemd_preun() \ if [ $1 -lt 1 ]; then \ %libvirt_systemd_disable %{?*} \ fi \ %{nil} # For daemons with only UNIX sockets %define libvirt_systemd_unix_pre() %libvirt_systemd_restart_pre %1.service %1.socket %1-ro.socket %1-admin.socket %define libvirt_systemd_unix_posttrans() %libvirt_systemd_posttrans %1.service %1.socket %1-ro.socket %1-admin.socket %define libvirt_systemd_unix_preun() %libvirt_systemd_preun %1.service %1.socket %1-ro.socket %1-admin.socket # For daemons with UNIX and INET sockets %define libvirt_systemd_inet_pre() %libvirt_systemd_restart_pre %1.service %1.socket %1-ro.socket %1-admin.socket %1-tls.socket %1-tcp.socket %define libvirt_systemd_inet_posttrans() %libvirt_systemd_posttrans %1.service %1.socket %1-ro.socket %1-admin.socket %1-tls.socket %1-tcp.socket %define libvirt_systemd_inet_preun() %libvirt_systemd_preun %1.service %1.socket %1-ro.socket %1-admin.socket %1-tls.socket %1-tcp.socket # For daemons with only UNIX sockets and no unprivileged read-only access %define libvirt_systemd_privileged_pre() %libvirt_systemd_reload_pre %1.service %1.socket %1-admin.socket %define libvirt_systemd_privileged_posttrans() %libvirt_systemd_posttrans %1.service %1.socket %1-admin.socket %define libvirt_systemd_privileged_preun() %libvirt_systemd_preun %1.service %1.socket %1-admin.socket # For one-shot daemons that have no associated sockets and should never be restarted %define libvirt_systemd_oneshot_pre() %libvirt_systemd_noaction_pre %1.service %define libvirt_systemd_oneshot_posttrans() %libvirt_systemd_posttrans %1.service %define libvirt_systemd_oneshot_preun() %libvirt_systemd_preun %1.service # For packages that install configuration for other daemons %define libvirt_systemd_config_pre() %libvirt_systemd_schedule_restart %1.service %define libvirt_systemd_config_posttrans() %libvirt_systemd_perform_restart %1.service %pre daemon %libvirt_sysconfig_pre libvirtd %libvirt_systemd_inet_pre libvirtd %posttrans daemon %libvirt_sysconfig_posttrans libvirtd %libvirt_systemd_inet_posttrans libvirtd %preun daemon %libvirt_systemd_inet_preun libvirtd %pre daemon-common %libvirt_sysconfig_pre libvirt-guests %libvirt_systemd_oneshot_pre libvirt-guests # 'libvirt' group is just to allow password-less polkit access to libvirt # daemons. The uid number is irrelevant, so we use dynamic allocation. getent group libvirt >/dev/null || groupadd -r libvirt exit 0 %posttrans daemon-common %libvirt_sysconfig_posttrans libvirt-guests %libvirt_systemd_oneshot_posttrans libvirt-guests %preun daemon-common %libvirt_systemd_oneshot_preun libvirt-guests %pre daemon-lock %libvirt_sysconfig_pre virtlockd %libvirt_systemd_privileged_pre virtlockd %posttrans daemon-lock %libvirt_sysconfig_posttrans virtlockd %libvirt_systemd_privileged_posttrans virtlockd %preun daemon-lock %libvirt_systemd_privileged_preun virtlockd %pre daemon-log %libvirt_sysconfig_pre virtlogd %libvirt_systemd_privileged_pre virtlogd %posttrans daemon-log %libvirt_sysconfig_posttrans virtlogd %libvirt_systemd_privileged_posttrans virtlogd %preun daemon-log %libvirt_systemd_privileged_preun virtlogd %pre daemon-proxy %libvirt_sysconfig_pre virtproxyd %libvirt_systemd_inet_pre virtproxyd %posttrans daemon-proxy %libvirt_sysconfig_posttrans virtproxyd %libvirt_systemd_inet_posttrans virtproxyd %preun daemon-proxy %libvirt_systemd_inet_preun virtproxyd %pre daemon-driver-network %libvirt_sysconfig_pre virtnetworkd %libvirt_systemd_unix_pre virtnetworkd %post daemon-driver-network %if %{with_firewalld_zone} %firewalld_reload %endif %posttrans daemon-driver-network %libvirt_sysconfig_posttrans virtnetworkd %libvirt_systemd_unix_posttrans virtnetworkd %preun daemon-driver-network %libvirt_systemd_unix_preun virtnetworkd %postun daemon-driver-network %if %{with_firewalld_zone} %firewalld_reload %endif %pre daemon-driver-nwfilter %libvirt_sysconfig_pre virtnwfilterd %libvirt_systemd_unix_pre virtnwfilterd %posttrans daemon-driver-nwfilter %libvirt_sysconfig_posttrans virtnwfilterd %libvirt_systemd_unix_posttrans virtnwfilterd %preun daemon-driver-nwfilter %libvirt_systemd_unix_preun virtnwfilterd %pre daemon-driver-nodedev %libvirt_sysconfig_pre virtnodedevd %libvirt_systemd_unix_pre virtnodedevd %posttrans daemon-driver-nodedev %libvirt_sysconfig_posttrans virtnodedevd %libvirt_systemd_unix_posttrans virtnodedevd %preun daemon-driver-nodedev %libvirt_systemd_unix_preun virtnodedevd %pre daemon-driver-interface %libvirt_sysconfig_pre virtinterfaced %libvirt_systemd_unix_pre virtinterfaced %posttrans daemon-driver-interface %libvirt_sysconfig_posttrans virtinterfaced %libvirt_systemd_unix_posttrans virtinterfaced %preun daemon-driver-interface %libvirt_systemd_unix_preun virtinterfaced %pre daemon-driver-secret %libvirt_sysconfig_pre virtsecretd %libvirt_systemd_unix_pre virsecretd %posttrans daemon-driver-secret %libvirt_sysconfig_posttrans virtsecretd %libvirt_systemd_unix_posttrans virsecretd %preun daemon-driver-secret %libvirt_systemd_unix_preun virsecretd %pre daemon-driver-storage-core %libvirt_sysconfig_pre virtstoraged %libvirt_systemd_unix_pre virtstoraged %posttrans daemon-driver-storage-core %libvirt_sysconfig_posttrans virtstoraged %libvirt_systemd_unix_posttrans virtstoraged %preun daemon-driver-storage-core %libvirt_systemd_unix_preun virtstoraged %if %{with_qemu} %pre daemon-driver-qemu %libvirt_sysconfig_pre virtqemud %libvirt_systemd_unix_pre virtqemud # We want soft static allocation of well-known ids, as disk images # are commonly shared across NFS mounts by id rather than name; see # https://fedoraproject.org/wiki/Packaging:UsersAndGroups getent group kvm >/dev/null || groupadd -f -g 36 -r kvm getent group qemu >/dev/null || groupadd -f -g 107 -r qemu if ! getent passwd qemu >/dev/null; then if ! getent passwd 107 >/dev/null; then useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu else useradd -r -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu fi fi exit 0 %posttrans daemon-driver-qemu %libvirt_sysconfig_posttrans virtqemud %libvirt_systemd_unix_posttrans virtqemud %preun daemon-driver-qemu %libvirt_systemd_unix_preun virtqemud %endif %if %{with_lxc} %pre daemon-driver-lxc %libvirt_sysconfig_pre virtlxcd %libvirt_systemd_unix_pre virtlxcd %posttrans daemon-driver-lxc %libvirt_sysconfig_posttrans virtlxcd %libvirt_systemd_unix_posttrans virtlxcd %preun daemon-driver-lxc %libvirt_systemd_unix_preun virtlxcd %endif %if %{with_vbox} %pre daemon-driver-vbox %libvirt_sysconfig_pre virtvboxd %libvirt_systemd_unix_pre virtvboxd %posttrans daemon-driver-vbox %libvirt_sysconfig_posttrans virtvboxd %libvirt_systemd_unix_posttrans virtvboxd %preun daemon-driver-vbox %libvirt_systemd_unix_preun virtvboxd %endif %if %{with_libxl} %pre daemon-driver-libxl %libvirt_sysconfig_pre virtxend %libvirt_systemd_unix_pre virtxend %posttrans daemon-driver-libxl %libvirt_sysconfig_posttrans virtxend %libvirt_systemd_unix_posttrans virtxend %preun daemon-driver-libxl %libvirt_systemd_unix_preun virtxend %endif %pre daemon-config-network %libvirt_systemd_config_pre libvirtd %libvirt_systemd_config_pre virtnetworkd %post daemon-config-network if test $1 -eq 1 && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml ; then # see if the network used by default network creates a conflict, # and try to resolve it # NB: 192.168.122.0/24 is used in the default.xml template file; # do not modify any of those values here without also modifying # them in the template. orig_sub=122 sub=${orig_sub} nl=' ' routes="${nl}$(ip route show | cut -d' ' -f1)${nl}" case ${routes} in *"${nl}192.168.${orig_sub}.0/24${nl}"*) # there was a match, so we need to look for an unused subnet for new_sub in $(seq 124 254); do case ${routes} in *"${nl}192.168.${new_sub}.0/24${nl}"*) ;; *) sub=$new_sub break; ;; esac done ;; *) ;; esac sed -e "s/${orig_sub}/${sub}/g" \ < %{_datadir}/libvirt/networks/default.xml \ > %{_sysconfdir}/libvirt/qemu/networks/default.xml ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml # libvirt saves this file with mode 0600 chmod 0600 %{_sysconfdir}/libvirt/qemu/networks/default.xml fi %posttrans daemon-config-network %libvirt_systemd_config_posttrans libvirtd %libvirt_systemd_config_posttrans virtnetworkd %pre daemon-config-nwfilter %libvirt_systemd_config_pre libvirtd %libvirt_systemd_config_pre virtnwfilterd %post daemon-config-nwfilter for datadir_file in %{_datadir}/libvirt/nwfilter/*.xml; do sysconfdir_file=%{_sysconfdir}/libvirt/nwfilter/$(basename "$datadir_file") if [ ! -f "$sysconfdir_file" ]; then # libvirt saves these files with mode 600 install -m 0600 "$datadir_file" "$sysconfdir_file" fi done %posttrans daemon-config-nwfilter %libvirt_systemd_config_posttrans libvirtd %libvirt_systemd_config_posttrans virtnwfilterd %if %{with_lxc} %pre login-shell getent group virtlogin >/dev/null || groupadd -r virtlogin exit 0 %endif %files %files docs %doc AUTHORS.rst NEWS.rst README.rst %doc libvirt-docs/* %files daemon %{_unitdir}/libvirtd.service %{_unitdir}/libvirtd.socket %{_unitdir}/libvirtd-ro.socket %{_unitdir}/libvirtd-admin.socket %{_unitdir}/libvirtd-tcp.socket %{_unitdir}/libvirtd-tls.socket %config(noreplace) %{_sysconfdir}/libvirt/libvirtd.conf %config(noreplace) %{_prefix}/lib/sysctl.d/60-libvirtd.conf %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd %{_datadir}/augeas/lenses/libvirtd.aug %{_datadir}/augeas/lenses/tests/test_libvirtd.aug %attr(0755, root, root) %{_sbindir}/libvirtd %{_mandir}/man8/libvirtd.8* %files daemon-common %{_unitdir}/virt-guest-shutdown.target %{_unitdir}/libvirt-guests.service %config(noreplace) %{_sysconfdir}/sasl2/libvirt.conf %dir %{_datadir}/libvirt/ %ghost %dir %{_rundir}/libvirt/ %ghost %dir %{_rundir}/libvirt/common/ %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/ %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/images/ %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/filesystems/ %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/boot/ %dir %attr(0711, root, root) %{_localstatedir}/cache/libvirt/ %dir %attr(0755, root, root) %{_libdir}/libvirt/ %dir %attr(0755, root, root) %{_libdir}/libvirt/connection-driver/ %dir %attr(0755, root, root) %{_libdir}/libvirt/storage-backend/ %dir %attr(0755, root, root) %{_libdir}/libvirt/storage-file/ %{_datadir}/polkit-1/actions/org.libvirt.unix.policy %{_datadir}/polkit-1/actions/org.libvirt.api.policy %{_datadir}/polkit-1/rules.d/50-libvirt.rules %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/ %attr(0755, root, root) %{_libexecdir}/libvirt_iohelper %attr(0755, root, root) %{_bindir}/virt-ssh-helper %attr(0755, root, root) %{_libexecdir}/libvirt-guests.sh %{_mandir}/man1/virt-admin.1* %{_mandir}/man1/virt-host-validate.1* %{_mandir}/man8/virt-ssh-helper.8* %{_mandir}/man8/libvirt-guests.8* %{_bindir}/virt-host-validate %{_bindir}/virt-admin %{_datadir}/bash-completion/completions/virt-admin %files daemon-lock %{_unitdir}/virtlockd.service %{_unitdir}/virtlockd.socket %{_unitdir}/virtlockd-admin.socket %config(noreplace) %{_sysconfdir}/libvirt/virtlockd.conf %{_datadir}/augeas/lenses/virtlockd.aug %{_datadir}/augeas/lenses/tests/test_virtlockd.aug %{_datadir}/augeas/lenses/libvirt_lockd.aug %if %{with_qemu} %{_datadir}/augeas/lenses/tests/test_libvirt_lockd.aug %endif %attr(0755, root, root) %{_sbindir}/virtlockd %{_mandir}/man8/virtlockd.8* %files daemon-plugin-lockd %dir %attr(0755, root, root) %{_libdir}/libvirt/lock-driver/ %attr(0755, root, root) %{_libdir}/libvirt/lock-driver/lockd.so %files daemon-log %{_unitdir}/virtlogd.service %{_unitdir}/virtlogd.socket %{_unitdir}/virtlogd-admin.socket %config(noreplace) %{_sysconfdir}/libvirt/virtlogd.conf %{_datadir}/augeas/lenses/virtlogd.aug %{_datadir}/augeas/lenses/tests/test_virtlogd.aug %attr(0755, root, root) %{_sbindir}/virtlogd %{_mandir}/man8/virtlogd.8* %files daemon-proxy %{_unitdir}/virtproxyd.service %{_unitdir}/virtproxyd.socket %{_unitdir}/virtproxyd-ro.socket %{_unitdir}/virtproxyd-admin.socket %{_unitdir}/virtproxyd-tcp.socket %{_unitdir}/virtproxyd-tls.socket %config(noreplace) %{_sysconfdir}/libvirt/virtproxyd.conf %{_datadir}/augeas/lenses/virtproxyd.aug %{_datadir}/augeas/lenses/tests/test_virtproxyd.aug %attr(0755, root, root) %{_sbindir}/virtproxyd %{_mandir}/man8/virtproxyd.8* %files daemon-config-network %dir %{_datadir}/libvirt/networks/ %{_datadir}/libvirt/networks/default.xml %ghost %{_sysconfdir}/libvirt/qemu/networks/default.xml %ghost %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml %files daemon-config-nwfilter %dir %{_datadir}/libvirt/nwfilter/ %{_datadir}/libvirt/nwfilter/*.xml %ghost %{_sysconfdir}/libvirt/nwfilter/*.xml %files daemon-driver-interface %config(noreplace) %{_sysconfdir}/libvirt/virtinterfaced.conf %{_datadir}/augeas/lenses/virtinterfaced.aug %{_datadir}/augeas/lenses/tests/test_virtinterfaced.aug %{_unitdir}/virtinterfaced.service %{_unitdir}/virtinterfaced.socket %{_unitdir}/virtinterfaced-ro.socket %{_unitdir}/virtinterfaced-admin.socket %attr(0755, root, root) %{_sbindir}/virtinterfaced %ghost %dir %{_rundir}/libvirt/interface/ %{_libdir}/libvirt/connection-driver/libvirt_driver_interface.so %{_mandir}/man8/virtinterfaced.8* %files daemon-driver-network %config(noreplace) %{_sysconfdir}/libvirt/virtnetworkd.conf %{_datadir}/augeas/lenses/virtnetworkd.aug %{_datadir}/augeas/lenses/tests/test_virtnetworkd.aug %{_unitdir}/virtnetworkd.service %{_unitdir}/virtnetworkd.socket %{_unitdir}/virtnetworkd-ro.socket %{_unitdir}/virtnetworkd-admin.socket %attr(0755, root, root) %{_sbindir}/virtnetworkd %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/ %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/ %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/autostart %ghost %dir %{_rundir}/libvirt/network/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/network/ %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/dnsmasq/ %attr(0755, root, root) %{_libexecdir}/libvirt_leaseshelper %{_libdir}/libvirt/connection-driver/libvirt_driver_network.so %{_mandir}/man8/virtnetworkd.8* %if %{with_firewalld_zone} %{_prefix}/lib/firewalld/zones/libvirt.xml %{_prefix}/lib/firewalld/zones/libvirt-routed.xml %{_prefix}/lib/firewalld/policies/libvirt-routed-in.xml %{_prefix}/lib/firewalld/policies/libvirt-routed-out.xml %{_prefix}/lib/firewalld/policies/libvirt-to-host.xml %endif %files daemon-driver-nodedev %config(noreplace) %{_sysconfdir}/libvirt/virtnodedevd.conf %{_datadir}/augeas/lenses/virtnodedevd.aug %{_datadir}/augeas/lenses/tests/test_virtnodedevd.aug %{_unitdir}/virtnodedevd.service %{_unitdir}/virtnodedevd.socket %{_unitdir}/virtnodedevd-ro.socket %{_unitdir}/virtnodedevd-admin.socket %attr(0755, root, root) %{_sbindir}/virtnodedevd %ghost %dir %{_rundir}/libvirt/nodedev/ %{_libdir}/libvirt/connection-driver/libvirt_driver_nodedev.so %{_mandir}/man8/virtnodedevd.8* %files daemon-driver-nwfilter %config(noreplace) %{_sysconfdir}/libvirt/virtnwfilterd.conf %{_datadir}/augeas/lenses/virtnwfilterd.aug %{_datadir}/augeas/lenses/tests/test_virtnwfilterd.aug %{_unitdir}/virtnwfilterd.service %{_unitdir}/virtnwfilterd.socket %{_unitdir}/virtnwfilterd-ro.socket %{_unitdir}/virtnwfilterd-admin.socket %attr(0755, root, root) %{_sbindir}/virtnwfilterd %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/nwfilter/ %ghost %dir %{_rundir}/libvirt/network/ %ghost %dir %{_rundir}/libvirt/nwfilter-binding/ %ghost %dir %{_rundir}/libvirt/nwfilter/ %{_libdir}/libvirt/connection-driver/libvirt_driver_nwfilter.so %{_mandir}/man8/virtnwfilterd.8* %files daemon-driver-secret %config(noreplace) %{_sysconfdir}/libvirt/virtsecretd.conf %{_datadir}/augeas/lenses/virtsecretd.aug %{_datadir}/augeas/lenses/tests/test_virtsecretd.aug %{_unitdir}/virtsecretd.service %{_unitdir}/virtsecretd.socket %{_unitdir}/virtsecretd-ro.socket %{_unitdir}/virtsecretd-admin.socket %attr(0755, root, root) %{_sbindir}/virtsecretd %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/secrets/ %ghost %dir %{_rundir}/libvirt/secrets/ %{_libdir}/libvirt/connection-driver/libvirt_driver_secret.so %{_mandir}/man8/virtsecretd.8* %files daemon-driver-storage %files daemon-driver-storage-core %config(noreplace) %{_sysconfdir}/libvirt/virtstoraged.conf %{_datadir}/augeas/lenses/virtstoraged.aug %{_datadir}/augeas/lenses/tests/test_virtstoraged.aug %{_unitdir}/virtstoraged.service %{_unitdir}/virtstoraged.socket %{_unitdir}/virtstoraged-ro.socket %{_unitdir}/virtstoraged-admin.socket %attr(0755, root, root) %{_sbindir}/virtstoraged %attr(0755, root, root) %{_libexecdir}/libvirt_parthelper %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/storage/ %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/storage/autostart/ %ghost %dir %{_rundir}/libvirt/storage/ %{_libdir}/libvirt/connection-driver/libvirt_driver_storage.so %{_libdir}/libvirt/storage-backend/libvirt_storage_backend_fs.so %{_libdir}/libvirt/storage-file/libvirt_storage_file_fs.so %{_mandir}/man8/virtstoraged.8* %files daemon-driver-storage-disk %{_libdir}/libvirt/storage-backend/libvirt_storage_backend_disk.so %files daemon-driver-storage-logical %{_libdir}/libvirt/storage-backend/libvirt_storage_backend_logical.so %files daemon-driver-storage-scsi %{_libdir}/libvirt/storage-backend/libvirt_storage_backend_scsi.so %files daemon-driver-storage-iscsi %{_libdir}/libvirt/storage-backend/libvirt_storage_backend_iscsi.so %if %{with_storage_iscsi_direct} %files daemon-driver-storage-iscsi-direct %{_libdir}/libvirt/storage-backend/libvirt_storage_backend_iscsi-direct.so %endif %files daemon-driver-storage-mpath %{_libdir}/libvirt/storage-backend/libvirt_storage_backend_mpath.so %if %{with_storage_gluster} %files daemon-driver-storage-gluster %{_libdir}/libvirt/storage-backend/libvirt_storage_backend_gluster.so %{_libdir}/libvirt/storage-file/libvirt_storage_file_gluster.so %endif %if %{with_storage_rbd} %files daemon-driver-storage-rbd %{_libdir}/libvirt/storage-backend/libvirt_storage_backend_rbd.so %endif %if %{with_storage_zfs} %files daemon-driver-storage-zfs %{_libdir}/libvirt/storage-backend/libvirt_storage_backend_zfs.so %endif %if %{with_qemu} %files daemon-driver-qemu %config(noreplace) %{_sysconfdir}/libvirt/virtqemud.conf %config(noreplace) %{_prefix}/lib/sysctl.d/60-qemu-postcopy-migration.conf %{_datadir}/augeas/lenses/virtqemud.aug %{_datadir}/augeas/lenses/tests/test_virtqemud.aug %{_unitdir}/virtqemud.service %{_unitdir}/virtqemud.socket %{_unitdir}/virtqemud-ro.socket %{_unitdir}/virtqemud-admin.socket %attr(0755, root, root) %{_sbindir}/virtqemud %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/ %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/autostart/ %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/qemu/ %config(noreplace) %{_sysconfdir}/libvirt/qemu.conf %config(noreplace) %{_sysconfdir}/libvirt/qemu-lockd.conf %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.qemu %ghost %dir %{_rundir}/libvirt/qemu/ %ghost %dir %{_rundir}/libvirt/qemu/dbus/ %ghost %dir %{_rundir}/libvirt/qemu/passt/ %ghost %dir %{_rundir}/libvirt/qemu/slirp/ %ghost %dir %{_rundir}/libvirt/qemu/swtpm/ %dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/ %dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/channel/ %dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/channel/target/ %dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/checkpoint/ %dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/dump/ %dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/nvram/ %dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/ram/ %dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/save/ %dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/snapshot/ %dir %attr(0750, root, root) %{_localstatedir}/cache/libvirt/qemu/ %{_datadir}/augeas/lenses/libvirtd_qemu.aug %{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug %{_libdir}/libvirt/connection-driver/libvirt_driver_qemu.so %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/swtpm/ %dir %attr(0730, tss, tss) %{_localstatedir}/log/swtpm/libvirt/qemu/ %{_bindir}/virt-qemu-run %{_mandir}/man1/virt-qemu-run.1* %{_mandir}/man8/virtqemud.8* %endif %if %{with_lxc} %files daemon-driver-lxc %config(noreplace) %{_sysconfdir}/libvirt/virtlxcd.conf %{_datadir}/augeas/lenses/virtlxcd.aug %{_datadir}/augeas/lenses/tests/test_virtlxcd.aug %{_unitdir}/virtlxcd.service %{_unitdir}/virtlxcd.socket %{_unitdir}/virtlxcd-ro.socket %{_unitdir}/virtlxcd-admin.socket %attr(0755, root, root) %{_sbindir}/virtlxcd %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/lxc/ %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/lxc/ %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/lxc/autostart/ %config(noreplace) %{_sysconfdir}/libvirt/lxc.conf %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.lxc %ghost %dir %{_rundir}/libvirt/lxc/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/lxc/ %{_datadir}/augeas/lenses/libvirtd_lxc.aug %{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug %attr(0755, root, root) %{_libexecdir}/libvirt_lxc %{_libdir}/libvirt/connection-driver/libvirt_driver_lxc.so %{_mandir}/man8/virtlxcd.8* %endif %if %{with_libxl} %files daemon-driver-libxl %config(noreplace) %{_sysconfdir}/libvirt/virtxend.conf %{_datadir}/augeas/lenses/virtxend.aug %{_datadir}/augeas/lenses/tests/test_virtxend.aug %{_unitdir}/virtxend.service %{_unitdir}/virtxend.socket %{_unitdir}/virtxend-ro.socket %{_unitdir}/virtxend-admin.socket %attr(0755, root, root) %{_sbindir}/virtxend %config(noreplace) %{_sysconfdir}/libvirt/libxl.conf %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.libxl %config(noreplace) %{_sysconfdir}/libvirt/libxl-lockd.conf %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/libxl/ %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/libxl/autostart/ %{_datadir}/augeas/lenses/libvirtd_libxl.aug %{_datadir}/augeas/lenses/tests/test_libvirtd_libxl.aug %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/libxl/ %ghost %dir %{_rundir}/libvirt/libxl/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/channel/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/channel/target/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/dump/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/save/ %{_libdir}/libvirt/connection-driver/libvirt_driver_libxl.so %{_mandir}/man8/virtxend.8* %endif %if %{with_vbox} %files daemon-driver-vbox %config(noreplace) %{_sysconfdir}/libvirt/virtvboxd.conf %{_datadir}/augeas/lenses/virtvboxd.aug %{_datadir}/augeas/lenses/tests/test_virtvboxd.aug %{_unitdir}/virtvboxd.service %{_unitdir}/virtvboxd.socket %{_unitdir}/virtvboxd-ro.socket %{_unitdir}/virtvboxd-admin.socket %attr(0755, root, root) %{_sbindir}/virtvboxd %{_libdir}/libvirt/connection-driver/libvirt_driver_vbox.so %{_mandir}/man8/virtvboxd.8* %endif %if %{with_qemu_tcg} %files daemon-qemu %endif %if %{with_qemu_kvm} %files daemon-kvm %endif %if %{with_lxc} %files daemon-lxc %endif %if %{with_libxl} %files daemon-xen %endif %if %{with_vbox} %files daemon-vbox %endif %if %{with_sanlock} %files daemon-plugin-sanlock %if %{with_qemu} %config(noreplace) %{_sysconfdir}/libvirt/qemu-sanlock.conf %endif %if %{with_libxl} %config(noreplace) %{_sysconfdir}/libvirt/libxl-sanlock.conf %endif %dir %attr(0755, root, root) %{_libdir}/libvirt/lock-driver/ %attr(0755, root, root) %{_libdir}/libvirt/lock-driver/sanlock.so %{_datadir}/augeas/lenses/libvirt_sanlock.aug %{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug %dir %attr(0770, root, sanlock) %{_localstatedir}/lib/libvirt/sanlock %{_sbindir}/virt-sanlock-cleanup %{_mandir}/man8/virt-sanlock-cleanup.8* %attr(0755, root, root) %{_libexecdir}/libvirt_sanlock_helper %endif %files client %{_mandir}/man1/virsh.1* %{_mandir}/man1/virt-xml-validate.1* %{_mandir}/man1/virt-pki-query-dn.1* %{_mandir}/man1/virt-pki-validate.1* %{_mandir}/man7/virkey*.7* %{_bindir}/virsh %{_bindir}/virt-xml-validate %{_bindir}/virt-pki-query-dn %{_bindir}/virt-pki-validate %{_datadir}/bash-completion/completions/virsh %if %{with_qemu} %files client-qemu %{_mandir}/man1/virt-qemu-qmp-proxy.1* %{_mandir}/man1/virt-qemu-sev-validate.1* %{_bindir}/virt-qemu-qmp-proxy %{_bindir}/virt-qemu-sev-validate %endif %files libs -f %{name}.lang %license COPYING COPYING.LESSER %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/ %config(noreplace) %{_sysconfdir}/libvirt/libvirt.conf %config(noreplace) %{_sysconfdir}/libvirt/libvirt-admin.conf %{_libdir}/libvirt.so.* %{_libdir}/libvirt-qemu.so.* %{_libdir}/libvirt-lxc.so.* %{_libdir}/libvirt-admin.so.* %dir %{_datadir}/libvirt/ %dir %{_datadir}/libvirt/schemas/ %{_datadir}/systemtap/tapset/libvirt_probes*.stp %{_datadir}/systemtap/tapset/libvirt_functions.stp %if %{with_qemu} %{_datadir}/systemtap/tapset/libvirt_qemu_probes*.stp %endif %{_datadir}/libvirt/schemas/*.rng %{_datadir}/libvirt/cpu_map/*.xml %{_datadir}/libvirt/test-screenshot.png %if %{with_wireshark} %files wireshark %{wireshark_plugindir}/libvirt.so %endif %files nss %{_libdir}/libnss_libvirt.so.2 %{_libdir}/libnss_libvirt_guest.so.2 %if %{with_lxc} %files login-shell %attr(4750, root, virtlogin) %{_bindir}/virt-login-shell %{_libexecdir}/virt-login-shell-helper %config(noreplace) %{_sysconfdir}/libvirt/virt-login-shell.conf %{_mandir}/man1/virt-login-shell.1* %endif %files devel %{_libdir}/libvirt.so %{_libdir}/libvirt-admin.so %{_libdir}/libvirt-qemu.so %{_libdir}/libvirt-lxc.so %dir %{_includedir}/libvirt %{_includedir}/libvirt/virterror.h %{_includedir}/libvirt/libvirt.h %{_includedir}/libvirt/libvirt-admin.h %{_includedir}/libvirt/libvirt-common.h %{_includedir}/libvirt/libvirt-domain.h %{_includedir}/libvirt/libvirt-domain-checkpoint.h %{_includedir}/libvirt/libvirt-domain-snapshot.h %{_includedir}/libvirt/libvirt-event.h %{_includedir}/libvirt/libvirt-host.h %{_includedir}/libvirt/libvirt-interface.h %{_includedir}/libvirt/libvirt-network.h %{_includedir}/libvirt/libvirt-nodedev.h %{_includedir}/libvirt/libvirt-nwfilter.h %{_includedir}/libvirt/libvirt-secret.h %{_includedir}/libvirt/libvirt-storage.h %{_includedir}/libvirt/libvirt-stream.h %{_includedir}/libvirt/libvirt-qemu.h %{_includedir}/libvirt/libvirt-lxc.h %{_libdir}/pkgconfig/libvirt.pc %{_libdir}/pkgconfig/libvirt-admin.pc %{_libdir}/pkgconfig/libvirt-qemu.pc %{_libdir}/pkgconfig/libvirt-lxc.pc %dir %{_datadir}/libvirt/api/ %{_datadir}/libvirt/api/libvirt-api.xml %{_datadir}/libvirt/api/libvirt-admin-api.xml %{_datadir}/libvirt/api/libvirt-qemu-api.xml %{_datadir}/libvirt/api/libvirt-lxc-api.xml %if %{with_mingw} %files -n mingw32-libvirt -f mingw32-libvirt.lang %dir %{mingw32_sysconfdir}/libvirt/ %config(noreplace) %{mingw32_sysconfdir}/libvirt/libvirt.conf %config(noreplace) %{mingw32_sysconfdir}/libvirt/libvirt-admin.conf %{mingw32_bindir}/libvirt-0.dll %{mingw32_bindir}/virsh.exe %{mingw32_bindir}/virt-admin.exe %{mingw32_bindir}/virt-xml-validate %{mingw32_bindir}/virt-pki-query-dn.exe %{mingw32_bindir}/virt-pki-validate %{mingw32_bindir}/libvirt-lxc-0.dll %{mingw32_bindir}/libvirt-qemu-0.dll %{mingw32_bindir}/libvirt-admin-0.dll %{mingw32_libdir}/libvirt.dll.a %{mingw32_libdir}/pkgconfig/libvirt.pc %{mingw32_libdir}/pkgconfig/libvirt-qemu.pc %{mingw32_libdir}/pkgconfig/libvirt-lxc.pc %{mingw32_libdir}/pkgconfig/libvirt-admin.pc %{mingw32_libdir}/libvirt-lxc.dll.a %{mingw32_libdir}/libvirt-qemu.dll.a %{mingw32_libdir}/libvirt-admin.dll.a %dir %{mingw32_datadir}/libvirt/ %dir %{mingw32_datadir}/libvirt/schemas/ %{mingw32_datadir}/libvirt/schemas/*.rng %dir %{mingw32_datadir}/libvirt/api/ %{mingw32_datadir}/libvirt/api/libvirt-api.xml %{mingw32_datadir}/libvirt/api/libvirt-lxc-api.xml %{mingw32_datadir}/libvirt/api/libvirt-qemu-api.xml %{mingw32_datadir}/libvirt/api/libvirt-admin-api.xml %{mingw32_datadir}/libvirt/cpu_map/*.xml %{mingw32_datadir}/libvirt/test-screenshot.png %dir %{mingw32_includedir}/libvirt %{mingw32_includedir}/libvirt/libvirt.h %{mingw32_includedir}/libvirt/libvirt-common.h %{mingw32_includedir}/libvirt/libvirt-domain.h %{mingw32_includedir}/libvirt/libvirt-domain-checkpoint.h %{mingw32_includedir}/libvirt/libvirt-domain-snapshot.h %{mingw32_includedir}/libvirt/libvirt-event.h %{mingw32_includedir}/libvirt/libvirt-host.h %{mingw32_includedir}/libvirt/libvirt-interface.h %{mingw32_includedir}/libvirt/libvirt-network.h %{mingw32_includedir}/libvirt/libvirt-nodedev.h %{mingw32_includedir}/libvirt/libvirt-nwfilter.h %{mingw32_includedir}/libvirt/libvirt-secret.h %{mingw32_includedir}/libvirt/libvirt-storage.h %{mingw32_includedir}/libvirt/libvirt-stream.h %{mingw32_includedir}/libvirt/virterror.h %{mingw32_includedir}/libvirt/libvirt-lxc.h %{mingw32_includedir}/libvirt/libvirt-qemu.h %{mingw32_includedir}/libvirt/libvirt-admin.h %{mingw32_mandir}/man1/virsh.1* %{mingw32_mandir}/man1/virt-admin.1* %{mingw32_mandir}/man1/virt-xml-validate.1* %{mingw32_mandir}/man1/virt-pki-query-dn.1* %{mingw32_mandir}/man1/virt-pki-validate.1* %{mingw32_mandir}/man7/virkey*.7* %files -n mingw64-libvirt -f mingw64-libvirt.lang %dir %{mingw64_sysconfdir}/libvirt/ %config(noreplace) %{mingw64_sysconfdir}/libvirt/libvirt.conf %config(noreplace) %{mingw64_sysconfdir}/libvirt/libvirt-admin.conf %{mingw64_bindir}/libvirt-0.dll %{mingw64_bindir}/virsh.exe %{mingw64_bindir}/virt-admin.exe %{mingw64_bindir}/virt-xml-validate %{mingw64_bindir}/virt-pki-query-dn.exe %{mingw64_bindir}/virt-pki-validate %{mingw64_bindir}/libvirt-lxc-0.dll %{mingw64_bindir}/libvirt-qemu-0.dll %{mingw64_bindir}/libvirt-admin-0.dll %{mingw64_libdir}/libvirt.dll.a %{mingw64_libdir}/pkgconfig/libvirt.pc %{mingw64_libdir}/pkgconfig/libvirt-qemu.pc %{mingw64_libdir}/pkgconfig/libvirt-lxc.pc %{mingw64_libdir}/pkgconfig/libvirt-admin.pc %{mingw64_libdir}/libvirt-lxc.dll.a %{mingw64_libdir}/libvirt-qemu.dll.a %{mingw64_libdir}/libvirt-admin.dll.a %dir %{mingw64_datadir}/libvirt/ %dir %{mingw64_datadir}/libvirt/schemas/ %{mingw64_datadir}/libvirt/schemas/*.rng %dir %{mingw64_datadir}/libvirt/api/ %{mingw64_datadir}/libvirt/api/libvirt-api.xml %{mingw64_datadir}/libvirt/api/libvirt-lxc-api.xml %{mingw64_datadir}/libvirt/api/libvirt-qemu-api.xml %{mingw64_datadir}/libvirt/api/libvirt-admin-api.xml %{mingw64_datadir}/libvirt/cpu_map/*.xml %{mingw64_datadir}/libvirt/test-screenshot.png %dir %{mingw64_includedir}/libvirt %{mingw64_includedir}/libvirt/libvirt.h %{mingw64_includedir}/libvirt/libvirt-common.h %{mingw64_includedir}/libvirt/libvirt-domain.h %{mingw64_includedir}/libvirt/libvirt-domain-checkpoint.h %{mingw64_includedir}/libvirt/libvirt-domain-snapshot.h %{mingw64_includedir}/libvirt/libvirt-event.h %{mingw64_includedir}/libvirt/libvirt-host.h %{mingw64_includedir}/libvirt/libvirt-interface.h %{mingw64_includedir}/libvirt/libvirt-network.h %{mingw64_includedir}/libvirt/libvirt-nodedev.h %{mingw64_includedir}/libvirt/libvirt-nwfilter.h %{mingw64_includedir}/libvirt/libvirt-secret.h %{mingw64_includedir}/libvirt/libvirt-storage.h %{mingw64_includedir}/libvirt/libvirt-stream.h %{mingw64_includedir}/libvirt/virterror.h %{mingw64_includedir}/libvirt/libvirt-lxc.h %{mingw64_includedir}/libvirt/libvirt-qemu.h %{mingw64_includedir}/libvirt/libvirt-admin.h %{mingw64_mandir}/man1/virsh.1* %{mingw64_mandir}/man1/virt-admin.1* %{mingw64_mandir}/man1/virt-xml-validate.1* %{mingw64_mandir}/man1/virt-pki-query-dn.1* %{mingw64_mandir}/man1/virt-pki-validate.1* %{mingw64_mandir}/man7/virkey*.7* %endif %changelog * Thu Sep 05 2023 Eduard Abdullin - 9.5.0-7.alma.1 - docs: update description of virsh nodedev-detach --driver option - qemu: turn two multiline log messages into single line - util: add stub driver name to virPCIDevice object - util: honor stubDriverName when probing/binding stub driver for a device - util: permit existing binding to VFIO variant driver - util: probe stub driver from within function that binds to stub driver - util: rename virPCIDeviceGetDriverPathAndName - util: use "stubDriverType" instead of just "stubDriver" - node_device: support binding other drivers with virNodeDeviceDetachFlags() * Fri Aug 25 2023 Jiri Denemark - 9.5.0-6 - tests: Use DO_TEST_CAPS_*_ABI_UPDATE() for ppc64 (rhbz#2196178) - tests: Switch to firmware autoselection for hvf (rhbz#2196178) - tests: Use virt-4.0 machine type for aarch64 (rhbz#2196178) - tests: Consistently use /path/to/guest_VARS.fd (rhbz#2196178) - tests: Turn abi-update.xml into a symlink (rhbz#2196178) - tests: Rename firmware-auto-efi-nvram-path (rhbz#2196178) - qemu: Fix return value for qemuFirmwareFillDomainLegacy() (rhbz#2196178) - qemu: Fix lookup against stateless/combined pflash (rhbz#2196178) - tests: Add some more DO_TEST*ABI_UPDATE* macros (rhbz#2196178) - tests: Add more tests for firmware selection (rhbz#2196178) - tests: Update firmware descriptor files (rhbz#2196178) - tests: Drop tags from BIOS firmware descriptor (rhbz#2196178) - tests: Include microvm in firmwaretest (rhbz#2196178) - qemu: Don't overwrite NVRAM template for legacy firmware (rhbz#2196178) - qemu: Generate NVRAM path in more cases (rhbz#2196178) - qemu: Filter firmware based on loader.readonly (rhbz#2196178) - qemu: Match NVRAM template extension for new domains (rhbz#2196178) - conf: Don't default to raw format for loader/NVRAM (rhbz#2196178) - tests: Rename firmware-auto-efi-format-loader-qcow2-nvram-path (rhbz#2196178) - tests: Reintroduce firmware-auto-efi-format-mismatch (rhbz#2196178) - rpm: Reorder scriptlets (rhbz#2210058) - rpm: Reduce use of with_modular_daemons (rhbz#2210058) - rpm: Remove custom libvirtd restart logic (rhbz#2210058) - rpm: Introduce new macros for handling of systemd units (rhbz#2210058) - rpm: Switch to new macros for handling of systemd units (rhbz#2210058) - rpm: Delete unused macros (rhbz#2210058) * Wed Aug 2 2023 Jiri Denemark - 9.5.0-5 - Revert "qemu_passt: Actually use @logfd" (rhbz#2209191) - Revert "qemu_passt: Precreate passt logfile" (rhbz#2209191) * Mon Jul 31 2023 Jiri Denemark - 9.5.0-4 - storage: Fix returning of locked objects from 'virStoragePoolObjListSearch' (CVE-2023-3750, rhbz#2221851) * Fri Jul 21 2023 Jiri Denemark - 9.5.0-3 - tests: remove acpi support from s390x ccw hotplug tests (rhbz#2168499) - tests: add capabilities for QEMU 8.1.0 on s390x (rhbz#2168499) - qemu: add run-with async-teardown capability (rhbz#2168499) - qemu: allow use of async teardown in domain (rhbz#2168499) - conf: domcaps: Add 'async-teardown' domain capability (rhbz#2168499) - qemu: S390 does not provide physical address size (rhbz#2224016) - nodedev: report mdev persistence properly (rhbz#2143158) - node_device: Don't leak error message buffer from virMdevctlListDefined|Active (rhbz#2143158) * Mon Jul 17 2023 Jiri Denemark - 9.5.0-2 - nodedev: transient mdev update on nodeDeviceCreateXML (rhbz#2143158) - nodedev: refactor mdevctl thread functions (rhbz#2143158) - nodedev: update mdevs from the mdevctl thread (rhbz#2143158) * Mon Jul 3 2023 Jiri Denemark - 9.5.0-1 - Rebased to libvirt-9.5.0 (rhbz#2175785) * Wed Jun 28 2023 Jiri Denemark - 9.5.0-0rc1.1 - Rebased to libvirt-9.5.0-rc1 (rhbz#2175785) - The rebase also fixes the following bugs: rhbz#2160356, rhbz#2209191, rhbz#2210287, rhbz#2209853, rhbz#2171860 rhbz#2138150, rhbz#2171384 * Fri Jun 2 2023 Jiri Denemark - 9.4.0-1 - Rebased to libvirt-9.4.0 (rhbz#2175785) - The rebase also fixes the following bugs: rhbz#2119007, rhbz#2193315, rhbz#2209658, rhbz#2143158, rhbz#2208946 rhbz#2138150, rhbz#2203657, rhbz#2180679, rhbz#2203709 * Tue May 16 2023 Jiri Denemark - 9.3.0-2 - qemu_domin: Account for NVMe disks when calculating memlock limit on hotplug (rhbz#2014030) * Fri May 5 2023 Jiri Denemark - 9.3.0-1 - Rebased to libvirt-9.3.0 (rhbz#2175785) - The rebase also fixes the following bugs: rhbz#2181235, rhbz#2176215, rhbz#2187133, rhbz#2178885, rhbz#2174700 rhbz#2160435, rhbz#2184966, rhbz#2187278, rhbz#2014030, rhbz#2185184 rhbz#2156300 * Mon Apr 3 2023 Jiri Denemark - 9.2.0-1 - Rebased to libvirt-9.2.0 (rhbz#2175785) - The rebase also fixes the following bugs: rhbz#2178885, rhbz#2000410, rhbz#2175582, rhbz#2154750, rhbz#2175449 rhbz#2181234, rhbz#2078693, rhbz#2176924, rhbz#2156300, rhbz#2173142 rhbz#2171973, rhbz#2178866, rhbz#2182961, rhbz#2174397, rhbz#2179030 rhbz#2161965, rhbz#2035985 * Mon Mar 13 2023 Jiri Denemark - 9.1.0-1 - Rebased to libvirt-9.1.0 (rhbz#2175785) - The rebase also fixes the following bugs: rhbz#2004850, rhbz#2137346, rhbz#2166235, rhbz#1961326 * Wed Feb 22 2023 Jiri Denemark - 9.0.0-7 - qemu_snapshot: remove memory snapshot when deleting external snapshot (rhbz#2170826) - qemu_snapshot: refactor qemuSnapshotDeleteExternalPrepare (rhbz#2170826) * Fri Feb 17 2023 Jiri Denemark - 9.0.0-6 - rpc: client: Don't check return value of virNetMessageNew (rhbz#2145188) - rpc: Don't warn about "max_client_requests" in single-threaded daemons (rhbz#2145188) * Mon Feb 13 2023 Jiri Denemark - 9.0.0-5 - qemu_extdevice: Do cleanup host only for VIR_DOMAIN_TPM_TYPE_EMULATOR (rhbz#2168762) - qemu: blockjob: Handle 'pending' blockjob state only when we need it (rhbz#2168769) * Thu Feb 9 2023 Jiri Denemark - 9.0.0-4 - qemuProcessStop: Fix detection of outgoing migration for external devices (rhbz#2161557) - qemuExtTPMStop: Restore TPM state label more often (rhbz#2161557) - qemuProcessLaunch: Tighten rules for external devices wrt incoming migration (rhbz#2161557) - qemu_process: Produce better debug message wrt domain namespaces (rhbz#2167302) - qemu_namespace: Deal with nested mounts when umount()-ing /dev (rhbz#2167302) - qemuProcessRefreshDisks: Don't skip filling of disk information if tray state didn't change (rhbz#2166411) * Wed Feb 1 2023 Jiri Denemark - 9.0.0-3 - src: Don't use virReportSystemError() on virProcessGetStatInfo() failure (rhbz#2148266) - qemu: Provide virDomainGetCPUStats() implementation for session connection (rhbz#2148266) - virsh: Make domif-setlink work more than once (rhbz#2165466) - qemu_fd: Remove declaration for 'qemuFDPassNewDirect' (rhbz#2040272) - qemuStorageSourcePrivateDataFormat: Rename 'tmp' to 'objectsChildBuf' (rhbz#2040272) - qemu: command: Handle FD passing commandline via qemuBuildBlockStorageSourceAttachDataCommandline (rhbz#2040272) - qemuFDPassTransferCommand: Mark that FD was passed (rhbz#2040272) - qemu: fd: Add helpers allowing storing FD set data in status XML (rhbz#2040272) - qemu: domain: Store fdset ID for disks passed to qemu via FD (rhbz#2040272) - qemu: block: Properly handle FD-passed disk hot-(un-)plug (rhbz#2040272) * Wed Jan 25 2023 Jiri Denemark - 9.0.0-2 - vircgroupv2: fix cpu.weight limits check (rhbz#2037998) - domain_validate: drop cpu.shares cgroup check (rhbz#2037998) - docs: document correct cpu shares limits with both cgroups v1 and v2 (rhbz#2037998) - qemu_interface: Fix managed='no' case when creating an ethernet interface (rhbz#2144738) - conf: clarify some external TPM error messages (rhbz#2063723) - qemu: hotplug: Remove legacy quirk for 'dimm' address generation (rhbz#2158701) - qemu: alias: Remove 'oldAlias' argument of qemuAssignDeviceMemoryAlias (rhbz#2158701) - qemu: Remove 'memAliasOrderMismatch' field from VM private data (rhbz#2158701) - rpc: Fix error message in virNetServerSetClientLimits (rhbz#2033879) * Mon Jan 16 2023 Jiri Denemark - 9.0.0-1 - Rebased to libvirt-9.0.0 (rhbz#2124466) - The rebase also fixes the following bugs: rhbz#2151064, rhbz#1874163, rhbz#2130192, rhbz#2111948, rhbz#1824722 rhbz#2150455, rhbz#2063723, rhbz#1717611, rhbz#2160448, rhbz#2151869 rhbz#2040272, rhbz#2144738, rhbz#2159851, rhbz#2156289, rhbz#2033879 rhbz#1820437, rhbz#2151202 * Tue Dec 6 2022 Jiri Denemark - 8.10.0-2 - qemu_process: Document qemuProcessPrepare{Domain,Host}() order (rhbz#2150760) - qemu_extdevice: Init paths in qemuExtDevicesPrepareDomain() (rhbz#2150760) - qemu_extdevice: Expose qemuExtDevicesInitPaths() (rhbz#2150760) - qemu: Init ext devices paths on reconnect (rhbz#2150760) * Thu Dec 1 2022 Jiri Denemark - 8.10.0-1 - Rebased to libvirt-8.10.0 (rhbz#2124466) - The rebase also fixes the following bugs: rhbz#2128993, rhbz#2143235, rhbz#2143840, rhbz#1874163, rhbz#2000075 rhbz#2143838, rhbz#2104919, rhbz#2072204, rhbz#2137298 * Wed Nov 2 2022 Jiri Denemark - 8.9.0-2 - RHEL: rpminspect: Disable abidiff inspection (rhbz#2124466) - spec: Fix python3-libvirt requirement in client-qemu package (rhbz#2124466) * Tue Nov 1 2022 Jiri Denemark - 8.9.0-1 - Rebased to libvirt-8.9.0 (rhbz#2124466) - The rebase also fixes the following bugs: rhbz#2074559, rhbz#2134009, rhbz#1777212, rhbz#2013523, rhbz#2114866 rhbz#1964855 * Mon Oct 3 2022 Jiri Denemark - 8.8.0-1 - Rebased to libvirt-8.8.0 (rhbz#2124466) - The rebase also fixes the following bugs: rhbz#2122534, rhbz#2121262, rhbz#2130089, rhbz#2121276, rhbz#2121627 rhbz#2125111, rhbz#2129239, rhbz#1964855, rhbz#2114866 * Tue Sep 6 2022 Jiri Denemark - 8.7.0-1 - Rebased to libvirt-8.7.0 (rhbz#2124466) - The rebase also fixes the following bugs: rhbz#2084046, rhbz#2108483, rhbz#2123371, rhbz#2101633, rhbz#1988211 rhbz#2086677, rhbz#2103132, rhbz#2078805, rhbz#2111301, rhbz#2094641 * Thu Aug 4 2022 Jiri Denemark - 8.5.0-5 - rpc: Pass OPENSSL_CONF through to ssh invocations (rhbz#2112348) * Fri Jul 29 2022 Jiri Denemark - 8.5.0-4 - qemu: Pass migration flags to qemuMigrationParamsApply (rhbz#2111070) - qemu_migration_params: Replace qemuMigrationParamTypes array (rhbz#2111070) - qemu_migration: Pass migParams to qemuMigrationSrcResume (rhbz#2111070) - qemu_migration: Apply max-postcopy-bandwidth on post-copy resume (rhbz#2111070) - qemu: Always assume support for QEMU_CAPS_MIGRATION_PARAM_XBZRLE_CACHE_SIZE (rhbz#2107892) - qemu_migration: Store original migration params in status XML (rhbz#2107892) - qemu_migration_params: Refactor qemuMigrationParamsApply (rhbz#2107892) - qemu_migration_params: Refactor qemuMigrationParamsReset (rhbz#2107892) - qemu_migration_params: Avoid deadlock in qemuMigrationParamsReset (rhbz#2107892) - qemu: Restore original memory locking limit on reconnect (rhbz#2107424) - qemu: Properly release job in qemuDomainSaveInternal (rhbz#1497907) - qemu: don't call qemuMigrationSrcIsAllowedHostdev() from qemuMigrationDstPrepareFresh() (rhbz#1497907) * Mon Jul 25 2022 Jiri Denemark - 8.5.0-3 - qemu: introduce capability QEMU_CAPS_MIGRATION_BLOCKED_REASONS (rhbz#2092833) - qemu: new function to retrieve migration blocker reasons from QEMU (rhbz#2092833) - qemu: query QEMU for migration blockers before our own harcoded checks (rhbz#2092833) - qemu: remove hardcoded migration fail for vDPA devices if we can ask QEMU (rhbz#2092833) - qemu_migration: Use EnterMonitorAsync in qemuDomainGetMigrationBlockers (rhbz#2092833) - qemu: don't try to query QEMU about migration blockers during offline migration (rhbz#2092833) - qemu_migration: Acquire correct job in qemuMigrationSrcIsAllowed (rhbz#2092833) - virsh: Require --xpath for *dumpxml (rhbz#2103524) - qemu: skip hardcoded hostdev migration check if QEMU can do it for us (rhbz#1497907) * Fri Jul 15 2022 Jiri Denemark - 8.5.0-2 - domain_conf: Format more often (rhbz#2059511) - domain_conf: Format iothread IDs more often (rhbz#2059511) - qemu: Make IOThread changing more robust (rhbz#2059511) - qemuDomainSetIOThreadParams: Accept VIR_DOMAIN_AFFECT_CONFIG flag (rhbz#2059511) - virsh: Implement --config for iothreadset (rhbz#2059511) - docs: Document TPM portion of domcaps (rhbz#2103119) - virtpm: Introduce TPM-1.2 and TPM-2.0 capabilieis (rhbz#2103119) - domcaps: Introduce TPM backendVersion (rhbz#2103119) - qemu: Report supported TPM version in domcaps (rhbz#2103119) - vircpi: Add PCIe 5.0 and 6.0 link speeds (rhbz#2105231) * Fri Jul 1 2022 Jiri Denemark - 8.5.0-1 - Rebased to libvirt-8.5.0 (rhbz#2060313) - The rebase also fixes the following bugs: rhbz#1475431, rhbz#2026765, rhbz#2059511, rhbz#2089431, rhbz#2102009 * Fri Jun 24 2022 Jiri Denemark - 8.4.0-3 - qemu: fd: Fix monitor usage of qemuFDPassDirectGetPath (rhbz#2092856) * Tue Jun 14 2022 Jiri Denemark - 8.4.0-2 - Revert "RHEL: Fix virConnectGetMaxVcpus output" (rhbz#2095260) * Thu Jun 2 2022 Jiri Denemark - 8.4.0-1 - Rebased to libvirt-8.4.0 (rhbz#2060313) - The rebase also fixes the following bugs: rhbz#2057768, rhbz#2081981, rhbz#2035163, rhbz#2075837, rhbz#2082540 rhbz#2075383 * Fri May 6 2022 Jiri Denemark - 8.3.0-1 - Rebased to libvirt-8.3.0 (rhbz#2060313) - The rebase also fixes the following bugs: rhbz#1653327, rhbz#2075765, rhbz#2075464, rhbz#2078274, rhbz#2070380 rhbz#2073887, rhbz#2073867 * Fri Apr 1 2022 Jiri Denemark - 8.2.0-1 - Rebased to libvirt-8.2.0 (rhbz#2060313) - The rebase also fixes the following bugs: rhbz#1866400, rhbz#2065381, rhbz#2063903, rhbz#1901394, rhbz#2065399 * Fri Mar 4 2022 Jiri Denemark - 8.1.0-1 - Rebased to libvirt-8.1.0 (rhbz#2060313) - The rebase also fixes the following bugs: rhbz#1643868, rhbz#2045953, rhbz#1910856, rhbz#2051451, rhbz#1745868 rhbz#2040548, rhbz#2041665, rhbz#1999372, rhbz#2038045, rhbz#2045959 rhbz#2046024, rhbz#2040555, rhbz#2057067, rhbz#2037146, rhbz#2036300 * Thu Feb 24 2022 Jiri Denemark - 8.0.0-5 - Make systemd unit ordering more robust (rhbz#1868537) - util: Fix machined servicename (rhbz#1868537) * Thu Feb 10 2022 Jiri Denemark - 8.0.0-4 - qemu_command: Generate memory only after controllers (rhbz#2047271) - qemu: Validate domain definition even on migration (rhbz#2048435) * Wed Feb 2 2022 Jiri Denemark - 8.0.0-3 - qemuDomainSetupDisk: Initialize 'targetPaths' (rhbz#2046170) * Tue Jan 25 2022 Jiri Denemark - 8.0.0-2 - build: Only install libvirt-guests when building libvirtd (rhbz#2042529) - docs: Add man page for libvirt-guests (rhbz#2042529) - remove sysconfig files (rhbz#2042529) - spec: Run pre/post-install stuff on 'daemon-driver-storage-core' (rhbz#2025644) - qemu: fix inactive snapshot revert (rhbz#2039136) - Revert "report error when virProcessGetStatInfo() is unable to parse data" (rhbz#2043579) * Fri Jan 14 2022 Jiri Denemark - 8.0.0-1 - Rebased to libvirt-8.0.0 (rhbz#2001507) - The rebase also fixes the following bugs: rhbz#2039246, rhbz#2039652, rhbz#2039651, rhbz#2039131 * Mon Jan 10 2022 Jiri Denemark - 8.0.0-0rc1.1 - Rebased to libvirt-8.0.0-rc1 (rhbz#2001507) - The rebase also fixes the following bugs: rhbz#2034539, rhbz#2027400, rhbz#1945420, rhbz#1851249, rhbz#2032410 rhbz#2026812, rhbz#2032365, rhbz#2035888, rhbz#2036895, rhbz#2026537 * Wed Dec 1 2021 Jiri Denemark - 7.10.0-1 - Rebased to libvirt-7.10.0 (rhbz#2001507) - The rebase also fixes the following bugs: rhbz#2024098, rhbz#1964223, rhbz#2018488, rhbz#2021437, rhbz#2022589 rhbz#2023605, rhbz#1431589, rhbz#2024435, rhbz#2016599, rhbz#1945501 rhbz#2023674 * Fri Nov 5 2021 Jiri Denemark - 7.9.0-1 - Rebased to libvirt-7.9.0 (rhbz#2001507) - The rebase also fixes the following bugs: rhbz#2007659, rhbz#2014487, rhbz#1806856, rhbz#2014139, rhbz#1964223 rhbz#2007168, rhbz#2012386, rhbz#2013573, rhbz#1897708 * Tue Oct 5 2021 Jiri Denemark - 7.8.0-1 - Rebased to libvirt-7.8.0 (rhbz#2001507) - The rebase also fixes the following bugs: rhbz#1999420, rhbz#2002761, rhbz#1998920, rhbz#1986066, rhbz#1822891 rhbz#2001627, rhbz#1819160, rhbz#2000861, rhbz#2003092 * Wed Sep 22 2021 Jiri Denemark - 7.7.0-3 - virshDomainGetVcpuBitmap: Return bitmap when taking the fallback path (rhbz#2004429) * Tue Sep 21 2021 Jiri Denemark - 7.7.0-2 - Update gating.yaml by adding subject_type - Revert "RHEL: spec: Do not enable modular daemons yet" (rhbz#1920012) * Fri Sep 10 2021 Jiri Denemark - 7.7.0-1 - Rebased to libvirt-7.7.0 (rhbz#2001507) - The rebase also fixes the following bugs: rhbz#2001326, rhbz#2001391, rhbz#2001322, rhbz#2001389, rhbz#1967187 rhbz#2001327, rhbz#1977155, rhbz#2001997, rhbz#2001323 - RHEL: spec: Do not enable modular daemons yet (rhbz#2001507) * Mon Aug 09 2021 Mohan Boddu - 7.6.0-2 - Rebuilt for IMA sigs, glibc 2.34, aarch64 flags Related: rhbz#1991688 * Wed Aug 4 2021 Jiri Denemark - 7.6.0-1 - Rebased to libvirt-7.6.0 (rhbz#1950948) - The rebase also fixes the following bugs: rhbz#1986509, rhbz#1984318, rhbz#1810661, rhbz#1977776, rhbz#1948433 rhbz#1978526, rhbz#1976690 * Wed Jul 14 2021 Jiri Denemark - 7.5.0-1 - Rebased to libvirt-7.5.0 (rhbz#1950948) - The rebase also fixes the following bugs: rhbz#1949388, rhbz#1969354, rhbz#1970277, rhbz#1972145, rhbz#1973094 rhbz#1975071, rhbz#1972468, rhbz#1975677 * Mon Jun 7 2021 Jiri Denemark - 7.4.0-1 - Rebased to libvirt-7.4.0 (rhbz#1950948) - The rebase also fixes the following bugs: rhbz#1960993 * Mon May 24 2021 Jiri Denemark - 7.3.0-1 - Rebased to libvirt-7.3.0 (rhbz#1950948) - The rebase also fixes the following bugs: rhbz#1898526, rhbz#1910617, rhbz#1910618, rhbz#1943392, rhbz#1946918 rhbz#1947718, rhbz#1947720, rhbz#1947824, rhbz#1949342, rhbz#1950228 rhbz#1950301, rhbz#1950601, rhbz#1950948, rhbz#1953939, rhbz#1958302 rhbz#1962053 - RHEL: Enable usage of x-blockdev-reopen (rhbz#1953939) - RHEL: Add gating.yaml for RHEL9 (rhbz#1950601) * Thu Apr 22 2021 Jiri Denemark - 7.0.0-6 - spec: Do not build qemu driver for Power on RHEL-9 (rhbz#1946529) * Fri Apr 16 2021 Mohan Boddu - 7.0.0-5 - Rebuilt for RHEL 9 BETA on Apr 15th 2021. Related: rhbz#1947937 * Wed Feb 03 2021 Cole Robinson - 7.0.0-4 - Increase meson test timeout to fix builds on s390x copr * Tue Feb 02 2021 Laine Stump - 7.0.0-3 - disable netcf in build * Tue Jan 26 2021 Fedora Release Engineering - 7.0.0-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild * Fri Jan 15 2021 Daniel P. Berrangé - 7.0.0-1 - Rebase to 7.0.0 release * Fri Dec 04 2020 Cole Robinson - 6.10.0-2.1 - Rebuild for wireshark soname bump * Fri Dec 04 2020 Richard W.M. Jones - 6.10.0-2 - Build libvirt-daemon-kvm for riscv64. * Tue Dec 01 2020 Cole Robinson - 6.10.0-1 - Update to version 6.10.0 * Wed Nov 4 2020 Daniel P. Berrangé - 6.9.0-2 - Re-apply reverted fix for disabling glusterfs, curl, openswman and libiscsi * Tue Nov 03 2020 Cole Robinson - 6.9.0-1 - Update to version 6.9.0 * Mon Nov 2 2020 Daniel P. Berrangé - 6.8.0-4 - Really fix meson option for disabling glusterfs - Fix disabling curl, openswman and libiscsi * Mon Nov 2 2020 Daniel P. Berrangé - 6.8.0-4 - Fix name of meson option for disabling glusterfs * Fri Oct 30 2020 Daniel P. Berrangé - 6.8.0-3 - Fix stat() mocking for new glibc * Wed Oct 28 2020 Daniel P. Berrangé - 6.8.0-2 - Remove obsolete bash_completion conditional - Pass args to meson based on with_libssh/with_libssh2 * Thu Oct 01 2020 Cole Robinson - 6.8.0-1 - Update to version 6.8.0 * Fri Sep 4 2020 Daniel P. Berrangé - 6.7.0-2 - Fix QEMU start when KVM is not loaded (rhbz#1875327) * Tue Sep 01 2020 Cole Robinson - 6.7.0-1 - Update to version 6.7.0 * Fri Aug 21 2020 Merlin Mathesius - 6.6.0-3 - Fix so no platforms depend upon ceph for 32-bit architectures - Include upstream patches to fix GCC 10 warnings * Fri Aug 21 2020 Daniel P. Berrangé - 6.6.0-2 - Fix creation of pools on non-btrfs (rhbz#1870197) * Tue Aug 04 2020 Cole Robinson - 6.6.0-1 - Update to version 6.6.0 * Tue Jul 28 2020 Fedora Release Engineering - 6.5.0-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild * Fri Jul 03 2020 Cole Robinson - 6.5.0-1 - Update to version 6.5.0 * Tue Jun 02 2020 Cole Robinson - 6.4.0-1 - Update to version 6.4.0 * Tue May 05 2020 Cole Robinson - 6.3.0-1 - Update to version 6.3.0 * Thu Apr 02 2020 Cole Robinson - 6.2.0-1 - Update to version 6.2.0 * Tue Mar 24 2020 Felipe Borges - 6.1.0-2 - Check for disk type correctly in virDomainDiskTranslateSourcePool * Wed Mar 04 2020 Cole Robinson - 6.1.0-1 - Update to version 6.1.0 * Tue Feb 25 2020 Cole Robinson - 6.0.0-3 - Rebuild for libiscsi soname bump * Wed Jan 29 2020 Fedora Release Engineering - 6.0.0-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild * Wed Jan 15 2020 Cole Robinson - 6.0.0-1 - Update to version 6.0.0