kexec-tools/kdumpctl
Coiby Xu 5951b5e268 Don't try to update crashkernel when bootloader is not installed
Currently when using anaconda to install the OS, the following errors
occur,

    INF packaging: Configuring (running scriptlet for): kernel-core-5.14.0-70.el9.x86_64 ...
    INF dnf.rpm: grep: /boot/grub2/grubenv: No such file or directory
    grep: /boot/grub2/grubenv: No such file or directory
    grep: /boot/grub2/grubenv: No such file or directory
    grep: /boot/grub2/grubenv: No such file or directory
    ...
    INF packaging: Configuring (running scriptlet for): kexec-tools-2.0.23-9.el9.x86_64 ...
    INF dnf.rpm: grep: /boot/grub2/grubenv: No such file or directory
    grep: /boot/grub2/grubenv: No such file or directory
    grep: /boot/grub2/grubenv: No such file or directory

Or for s390, the following errors occur,

    INF packaging: Configuring (running scriptlet for): kernel-core-5.14.0-71.el9.s390x ...
    03:37:51,232 INF dnf.rpm: grep: /etc/zipl.conf: No such file or directory
    grep: /etc/zipl.conf: No such file or directory
    grep: /etc/zipl.conf: No such file or directory

    INF packaging: Configuring (running scriptlet for): kexec-tools-2.0.23-9_1.el9_0.s390x ...
    INF dnf.rpm: grep: /etc/zipl.conf: No such file or directory

This is because when anaconda installs the packages, bootloader hasn't
been installed and /boot/grub2/grubenv or /etc/zipl.conf doesn't exist.
So don't try to update crashkernel when bootloader isn't ready to avoid
the above errors.

Note this is the second attempt to fix this issue. Previously a file
/tmp/kexec_tools_package_install was created to avoid running the
related code thus to avoid the above errors but unfortunately that
approach has two issues a) somehow osbuild doesn't delete it for RHEL b)
this file could still exist if users manually remove kexec-tools.

Fixes: e218128 ("Only try to reset crashkernel for osbuild during package install")
Reported-by: Jan Stodola <jstodola@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
2022-12-22 10:33:00 +08:00

1839 lines
47 KiB
Bash
Executable File

#!/bin/bash
KEXEC=/sbin/kexec
KDUMP_KERNELVER=""
KDUMP_KERNEL=""
KDUMP_COMMANDLINE=""
KEXEC_ARGS=""
KDUMP_LOG_PATH="/var/log"
MKDUMPRD="/sbin/mkdumprd -f"
MKFADUMPRD="/sbin/mkfadumprd"
DRACUT_MODULES_FILE="/usr/lib/dracut/modules.txt"
DEFAULT_INITRD=""
DEFAULT_INITRD_BAK=""
INITRD_CHECKSUM_LOCATION=""
KDUMP_INITRD=""
TARGET_INITRD=""
FADUMP_REGISTER_SYS_NODE="/sys/kernel/fadump_registered"
#kdump shall be the default dump mode
DEFAULT_DUMP_MODE="kdump"
image_time=0
standard_kexec_args="-d -p"
# Some default values in case /etc/sysconfig/kdump doesn't include
KDUMP_COMMANDLINE_REMOVE="hugepages hugepagesz slub_debug"
declare -A OPT
if [[ -f /etc/sysconfig/kdump ]]; then
. /etc/sysconfig/kdump
fi
[[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut
. $dracutbasedir/dracut-functions.sh
if [[ ${__SOURCED__:+x} ]]; then
KDUMP_LIB_PATH=.
else
KDUMP_LIB_PATH=/lib/kdump
fi
. $KDUMP_LIB_PATH/kdump-lib.sh
. $KDUMP_LIB_PATH/kdump-logger.sh
#initiate the kdump logger
if ! dlog_init; then
echo "failed to initiate the kdump logger."
exit 1
fi
single_instance_lock()
{
local rc timeout=5 lockfile
if [[ -d /run/lock ]]; then
lockfile=/run/lock/kdump
else
# when updating package using virt-customize, /run/lock doesn't exist
lockfile=/tmp/kdump.lock
fi
if ! exec 9> $lockfile; then
derror "Create file lock failed"
exit 1
fi
flock -n 9
rc=$?
while [[ $rc -ne 0 ]]; do
dinfo "Another app is currently holding the kdump lock; waiting for it to exit..."
flock -w $timeout 9
rc=$?
done
}
determine_dump_mode()
{
# Check if firmware-assisted dump is enabled
# if yes, set the dump mode as fadump
if is_fadump_capable; then
dinfo "Dump mode is fadump"
DEFAULT_DUMP_MODE="fadump"
fi
ddebug "DEFAULT_DUMP_MODE=$DEFAULT_DUMP_MODE"
}
rebuild_fadump_initrd()
{
if ! $MKFADUMPRD "$DEFAULT_INITRD_BAK" "$TARGET_INITRD" --kver "$KDUMP_KERNELVER"; then
derror "mkfadumprd: failed to make fadump initrd"
return 1
fi
sync -f "$TARGET_INITRD"
return 0
}
check_earlykdump_is_enabled()
{
grep -q -w "rd.earlykdump" /proc/cmdline
}
rebuild_kdump_initrd()
{
ddebug "rebuild kdump initrd: $MKDUMPRD $TARGET_INITRD $KDUMP_KERNELVER"
if ! $MKDUMPRD "$TARGET_INITRD" "$KDUMP_KERNELVER"; then
derror "mkdumprd: failed to make kdump initrd"
return 1
fi
if check_earlykdump_is_enabled; then
dwarn "Tips: If early kdump is enabled, also require rebuilding the system initramfs to make the changes take effect for early kdump."
fi
sync -f "$TARGET_INITRD"
return 0
}
rebuild_initrd()
{
if [[ ! -w $(dirname "$TARGET_INITRD") ]]; then
derror "$(dirname "$TARGET_INITRD") does not have write permission. Cannot rebuild $TARGET_INITRD"
return 1
fi
if [[ $DEFAULT_DUMP_MODE == "fadump" ]]; then
rebuild_fadump_initrd
else
rebuild_kdump_initrd
fi
}
#$1: the files to be checked with IFS=' '
check_exist()
{
for file in $1; do
if [[ ! -e $file ]]; then
derror "Error: $file not found."
return 1
fi
done
}
#$1: the files to be checked with IFS=' '
check_executable()
{
for file in $1; do
if [[ ! -x $file ]]; then
derror "Error: $file is not executable."
return 1
fi
done
}
backup_default_initrd()
{
ddebug "backup default initrd: $DEFAULT_INITRD"
if [[ ! -f $DEFAULT_INITRD ]]; then
return
fi
if [[ ! -e $DEFAULT_INITRD_BAK ]]; then
dinfo "Backing up $DEFAULT_INITRD before rebuild."
# save checksum to verify before restoring
sha1sum "$DEFAULT_INITRD" > "$INITRD_CHECKSUM_LOCATION"
if ! cp "$DEFAULT_INITRD" "$DEFAULT_INITRD_BAK"; then
dwarn "WARNING: failed to backup $DEFAULT_INITRD."
rm -f -- "$INITRD_CHECKSUM_LOCATION"
rm -f -- "$DEFAULT_INITRD_BAK"
fi
fi
}
restore_default_initrd()
{
ddebug "restore default initrd: $DEFAULT_INITRD"
if [[ ! -f $DEFAULT_INITRD ]]; then
return
fi
# If a backup initrd exists, we must be switching back from
# fadump to kdump. Restore the original default initrd.
if [[ -f $DEFAULT_INITRD_BAK ]] && [[ -f $INITRD_CHECKSUM_LOCATION ]]; then
# verify checksum before restoring
backup_checksum=$(sha1sum "$DEFAULT_INITRD_BAK" | awk '{ print $1 }')
default_checksum=$(awk '{ print $1 }' "$INITRD_CHECKSUM_LOCATION")
if [[ $default_checksum != "$backup_checksum" ]]; then
dwarn "WARNING: checksum mismatch! Can't restore original initrd.."
else
rm -f $INITRD_CHECKSUM_LOCATION
if mv "$DEFAULT_INITRD_BAK" "$DEFAULT_INITRD"; then
derror "Restoring original initrd as fadump mode is disabled."
sync -f "$DEFAULT_INITRD"
fi
fi
fi
}
_set_config()
{
local opt=$1
local val=$2
if [[ -z $val ]]; then
derror "Invalid kdump config value for option '$opt'"
return 1
fi
if [[ -n ${OPT[$opt]} ]]; then
if [[ $opt == _target ]] || [[ $opt == _fstype ]]; then
derror "More than one dump targets specified"
else
derror "Duplicated kdump config value of option $opt"
fi
return 1
fi
OPT[$opt]="$val"
}
parse_config()
{
while read -r config_opt config_val; do
case "$config_opt" in
dracut_args)
if [[ $config_val == *--mount* ]]; then
if [[ $(echo "$config_val" | grep -o -- "--mount" | wc -l) -ne 1 ]]; then
derror 'Multiple mount targets specified in one "dracut_args".'
return 1
fi
_set_config _fstype "$(get_dracut_args_fstype "$config_val")" || return 1
_set_config _target "$(get_dracut_args_target "$config_val")" || return 1
fi
;;
raw)
if [[ -d "/proc/device-tree/ibm,opal/dump" ]]; then
dwarn "WARNING: Won't capture opalcore when 'raw' dump target is used."
fi
_set_config _fstype "$config_opt" || return 1
config_opt=_target
;;
ext[234] | minix | btrfs | xfs | nfs | ssh | virtiofs)
_set_config _fstype "$config_opt" || return 1
config_opt=_target
;;
sshkey)
if [[ -z $config_val ]]; then
derror "Invalid kdump config value for option '$config_opt'"
return 1
elif [[ -f $config_val ]]; then
config_val=$(/usr/bin/readlink -m "$config_val")
else
dwarn "WARNING: '$config_val' doesn't exist, using default value '$DEFAULT_SSHKEY'"
config_val=$DEFAULT_SSHKEY
fi
;;
path | core_collector | kdump_post | kdump_pre | extra_bins | extra_modules | failure_action | default | final_action | force_rebuild | force_no_rebuild | fence_kdump_args | fence_kdump_nodes | auto_reset_crashkernel) ;;
net | options | link_delay | disk_timeout | debug_mem_level | blacklist)
derror "Deprecated kdump config option: $config_opt. Refer to kdump.conf manpage for alternatives."
return 1
;;
'')
continue
;;
*)
derror "Invalid kdump config option $config_opt"
return 1
;;
esac
_set_config "$config_opt" "$config_val" || return 1
done <<< "$(kdump_read_conf)"
OPT[path]=${OPT[path]:-$DEFAULT_PATH}
OPT[sshkey]=${OPT[sshkey]:-$DEFAULT_SSHKEY}
check_failure_action_config || return 1
check_final_action_config || return 1
check_fence_kdump_config || return 1
check_ssh_config || return 1
return 0
}
# get_pcs_cluster_modified_files <image timestamp>
# return list of modified file for fence_kdump modified in Pacemaker cluster
get_pcs_cluster_modified_files()
{
local time_stamp
local modified_files
is_generic_fence_kdump && return 1
is_pcs_fence_kdump || return 1
time_stamp=$(pcs cluster cib | xmllint --xpath 'string(/cib/@cib-last-written)' - | xargs -0 date +%s --date)
if [[ -n $time_stamp ]] && [[ $time_stamp -gt $image_time ]]; then
modified_files="cluster-cib"
fi
if [[ -f $FENCE_KDUMP_CONFIG_FILE ]]; then
time_stamp=$(stat -c "%Y" "$FENCE_KDUMP_CONFIG_FILE")
if [[ $time_stamp -gt $image_time ]]; then
modified_files="$modified_files $FENCE_KDUMP_CONFIG_FILE"
fi
fi
echo "$modified_files"
}
setup_initrd()
{
if ! prepare_kdump_bootinfo; then
derror "failed to prepare for kdump bootinfo."
return 1
fi
DEFAULT_INITRD_BAK="$KDUMP_BOOTDIR/.$(basename "$DEFAULT_INITRD").default"
INITRD_CHECKSUM_LOCATION="$DEFAULT_INITRD_BAK.checksum"
if [[ $DEFAULT_DUMP_MODE == "fadump" ]]; then
TARGET_INITRD="$DEFAULT_INITRD"
# backup initrd for reference before replacing it
# with fadump aware initrd
backup_default_initrd
else
TARGET_INITRD="$KDUMP_INITRD"
# check if a backup of default initrd exists. If yes,
# it signifies a switch from fadump mode. So, restore
# the backed up default initrd.
restore_default_initrd
fi
}
check_files_modified()
{
local modified_files=""
#also rebuild when Pacemaker cluster conf is changed and fence kdump is enabled.
modified_files=$(get_pcs_cluster_modified_files)
EXTRA_BINS=${OPT[kdump_post]}
CHECK_FILES=${OPT[kdump_pre]}
HOOKS="/etc/kdump/post.d/ /etc/kdump/pre.d/"
if [[ -d /etc/kdump/post.d ]]; then
for file in /etc/kdump/post.d/*; do
if [[ -x $file ]]; then
POST_FILES="$POST_FILES $file"
fi
done
fi
if [[ -d /etc/kdump/pre.d ]]; then
for file in /etc/kdump/pre.d/*; do
if [[ -x $file ]]; then
PRE_FILES="$PRE_FILES $file"
fi
done
fi
HOOKS="$HOOKS $POST_FILES $PRE_FILES"
CORE_COLLECTOR=$(echo "${OPT[core_collector]}" | awk '{print $1}')
CORE_COLLECTOR=$(type -P "$CORE_COLLECTOR")
# POST_FILES and PRE_FILES are already checked against executable, need not to check again.
EXTRA_BINS="$EXTRA_BINS $CHECK_FILES"
CHECK_FILES=${OPT[extra_bins]}
EXTRA_BINS="$EXTRA_BINS $CHECK_FILES"
files="$KDUMP_CONFIG_FILE $KDUMP_KERNEL $EXTRA_BINS $CORE_COLLECTOR"
[[ -e /etc/fstab ]] && files="$files /etc/fstab"
# Check for any updated extra module
EXTRA_MODULES="${OPT[extra_modules]}"
if [[ -n $EXTRA_MODULES ]]; then
if [[ -e /lib/modules/$KDUMP_KERNELVER/modules.dep ]]; then
files="$files /lib/modules/$KDUMP_KERNELVER/modules.dep"
fi
for _module in $EXTRA_MODULES; do
if _module_file="$(modinfo --set-version "$KDUMP_KERNELVER" --filename "$_module" 2> /dev/null)"; then
files="$files $_module_file"
for _dep_modules in $(modinfo -F depends "$_module" | tr ',' ' '); do
files="$files $(modinfo --set-version "$KDUMP_KERNELVER" --filename "$_dep_modules" 2> /dev/null)"
done
else
# If it's not a module nor builtin, give an error
if ! (modprobe --set-version "$KDUMP_KERNELVER" --dry-run "$_module" &> /dev/null); then
dwarn "Module $_module not found"
fi
fi
done
fi
# HOOKS is mandatory and need to check the modification time
files="$files $HOOKS"
is_lvm2_thinp_dump_target && files="$files $LVM_CONF"
check_exist "$files" && check_executable "$EXTRA_BINS" || return 2
for file in $files; do
if [[ -e $file ]]; then
time_stamp=$(stat -c "%Y" "$file")
if [[ $time_stamp -gt $image_time ]]; then
modified_files="$modified_files $file"
fi
if [[ -L $file ]]; then
file=$(readlink -m "$file")
time_stamp=$(stat -c "%Y" "$file")
if [[ $time_stamp -gt $image_time ]]; then
modified_files="$modified_files $file"
fi
fi
else
dwarn "$file doesn't exist"
fi
done
if [[ -n $modified_files ]]; then
dinfo "Detected change(s) in the following file(s): $modified_files"
return 1
fi
return 0
}
check_drivers_modified()
{
local _target _new_drivers _old_drivers _module_name _module_filename
# If it's dump target is on block device, detect the block driver
_target=$(get_block_dump_target)
if [[ -n $_target ]]; then
_record_block_drivers()
{
local _drivers
_drivers=$(udevadm info -a "/dev/block/$1" | sed -n 's/\s*DRIVERS=="\(\S\+\)"/\1/p')
for _driver in $_drivers; do
if ! [[ " $_new_drivers " == *" $_driver "* ]]; then
_new_drivers="$_new_drivers $_driver"
fi
done
ddebug "MAJ:MIN=$1 drivers='$_drivers'"
}
check_block_and_slaves_all _record_block_drivers "$(get_maj_min "$_target")"
fi
# Include watchdog drivers if watchdog module is not omitted
is_dracut_mod_omitted watchdog || _new_drivers+=" $(get_watchdog_drvs)"
[[ -z $_new_drivers ]] && return 0
if is_fadump_capable; then
_old_drivers="$(lsinitrd "$TARGET_INITRD" -f /usr/lib/dracut/fadump-kernel-modules.txt | tr '\n' ' ')"
else
_old_drivers="$(lsinitrd "$TARGET_INITRD" -f /usr/lib/dracut/hostonly-kernel-modules.txt | tr '\n' ' ')"
fi
ddebug "Modules required for kdump: '$_new_drivers'"
ddebug "Modules included in old initramfs: '$_old_drivers'"
for _driver in $_new_drivers; do
# Skip deprecated/invalid driver name or built-in module
_module_name=$(modinfo --set-version "$KDUMP_KERNELVER" -F name "$_driver" 2> /dev/null)
_module_filename=$(modinfo --set-version "$KDUMP_KERNELVER" -n "$_driver" 2> /dev/null)
if [[ -z $_module_name ]] || [[ -z $_module_filename ]] || [[ $_module_filename == *"(builtin)"* ]]; then
continue
fi
if ! [[ " $_old_drivers " == *" $_module_name "* ]]; then
dinfo "Detected change in block device driver, new loaded module: $_module_name"
return 1
fi
done
}
check_fs_modified()
{
local _old_dev _old_mntpoint _old_fstype
local _new_dev _new_mntpoint _new_fstype
local _target _dracut_args
# No need to check in case of mount target specified via "dracut_args".
if is_mount_in_dracut_args; then
return 0
fi
# No need to check in case of raw target.
# Currently we do not check also if ssh/nfs/virtiofs/thinp target is specified
if is_ssh_dump_target || is_nfs_dump_target || is_raw_dump_target ||
is_virtiofs_dump_target || is_lvm2_thinp_dump_target; then
return 0
fi
_target=$(get_block_dump_target)
_new_fstype=$(get_fs_type_from_target "$_target")
if [[ -z $_target ]] || [[ -z $_new_fstype ]]; then
derror "Dump target is invalid"
return 2
fi
ddebug "_target=$_target _new_fstype=$_new_fstype"
_new_dev=$(kdump_get_persistent_dev "$_target")
if [[ -z $_new_dev ]]; then
perror "Get persistent device name failed"
return 2
fi
_new_mntpoint="$(get_kdump_mntpoint_from_target "$_target")"
_dracut_args=$(lsinitrd "$TARGET_INITRD" -f usr/lib/dracut/build-parameter.txt)
if [[ -z $_dracut_args ]]; then
dwarn "Warning: No dracut arguments found in initrd"
return 0
fi
# if --mount argument present then match old and new target, mount
# point and file system. If any of them mismatches then rebuild
if echo "$_dracut_args" | grep -q -- "--mount"; then
# shellcheck disable=SC2046
set -- $(echo "$_dracut_args" | awk -F "--mount '" '{print $2}' | cut -d' ' -f1,2,3)
_old_dev=$1
_old_mntpoint=$2
_old_fstype=$3
[[ $_new_dev == "$_old_dev" && $_new_mntpoint == "$_old_mntpoint" && $_new_fstype == "$_old_fstype" ]] && return 0
# otherwise rebuild if target device is not a root device
else
[[ $_target == "$(get_root_fs_device)" ]] && return 0
fi
dinfo "Detected change in File System"
return 1
}
# returns 0 if system is not modified
# returns 1 if system is modified
# returns 2 if system modification is invalid
check_system_modified()
{
local ret
[[ -f $TARGET_INITRD ]] || return 1
check_files_modified
ret=$?
if [[ $ret -ne 0 ]]; then
return $ret
fi
check_fs_modified
ret=$?
if [[ $ret -ne 0 ]]; then
return $ret
fi
check_drivers_modified
ret=$?
if [[ $ret -ne 0 ]]; then
return $ret
fi
return 0
}
check_rebuild()
{
local capture_capable_initrd="1"
local force_rebuild force_no_rebuild
local ret system_modified="0"
setup_initrd || return 1
force_no_rebuild=${OPT[force_no_rebuild]}
force_no_rebuild=${force_no_rebuild:-0}
if [[ $force_no_rebuild != "0" ]] && [[ $force_no_rebuild != "1" ]]; then
derror "Error: force_no_rebuild value is invalid"
return 1
fi
force_rebuild=${OPT[force_rebuild]}
force_rebuild=${force_rebuild:-0}
if [[ $force_rebuild != "0" ]] && [[ $force_rebuild != "1" ]]; then
derror "Error: force_rebuild value is invalid"
return 1
fi
if [[ $force_no_rebuild == "1" && $force_rebuild == "1" ]]; then
derror "Error: force_rebuild and force_no_rebuild are enabled simultaneously in kdump.conf"
return 1
fi
# Will not rebuild kdump initrd
if [[ $force_no_rebuild == "1" ]]; then
return 0
fi
#check to see if dependent files has been modified
#since last build of the image file
if [[ -f $TARGET_INITRD ]]; then
image_time=$(stat -c "%Y" "$TARGET_INITRD" 2> /dev/null)
#in case of fadump mode, check whether the default/target
#initrd is already built with dump capture capability
if [[ $DEFAULT_DUMP_MODE == "fadump" ]]; then
capture_capable_initrd=$(lsinitrd -f $DRACUT_MODULES_FILE "$TARGET_INITRD" | grep -c -e ^kdumpbase$ -e ^zz-fadumpinit$)
fi
fi
check_system_modified
ret=$?
if [[ $ret -eq 2 ]]; then
return 1
elif [[ $ret -eq 1 ]]; then
system_modified="1"
fi
if [[ $image_time -eq 0 ]]; then
dinfo "No kdump initial ramdisk found."
elif [[ $capture_capable_initrd == "0" ]]; then
dinfo "Rebuild $TARGET_INITRD with dump capture support"
elif [[ $force_rebuild != "0" ]]; then
dinfo "Force rebuild $TARGET_INITRD"
elif [[ $system_modified != "0" ]]; then
:
else
return 0
fi
dinfo "Rebuilding $TARGET_INITRD"
rebuild_initrd
}
# On ppc64le LPARs, the keys trusted by firmware do not end up in
# .builtin_trusted_keys. So instead, add the key to the .ima keyring
function load_kdump_kernel_key()
{
# this is only called inside is_secure_boot_enforced,
# no need to retest
# this is only required if DT /ibm,secure-boot is a file.
# if it is a dir, we are on OpenPower and don't need this.
if ! [[ -f /proc/device-tree/ibm,secure-boot ]]; then
return
fi
KDUMP_KEY_ID=$(keyctl padd asymmetric kernelkey-$RANDOM %:.ima < "/usr/share/doc/kernel-keys/$KDUMP_KERNELVER/kernel-signing-ppc.cer")
}
# remove a previously loaded key. There's no real security implication
# to leaving it around, we choose to do this because it makes it easier
# to be idempotent and so as to reduce the potential for confusion.
function remove_kdump_kernel_key()
{
if [[ -z $KDUMP_KEY_ID ]]; then
return
fi
keyctl unlink "$KDUMP_KEY_ID" %:.ima
}
function is_aws_aarch64()
{
local _bios_model
_bios_model=$(lscpu | grep "BIOS Model name")
if [[ "${_bios_model}" =~ "AWS Graviton" ]]; then
return 0
fi
return 1
}
# Load the kdump kernel specified in /etc/sysconfig/kdump
# If none is specified, try to load a kdump kernel with the same version
# as the currently running kernel.
load_kdump()
{
local ret
KEXEC_ARGS=$(prepare_kexec_args "${KEXEC_ARGS}")
KDUMP_COMMANDLINE=$(prepare_cmdline "${KDUMP_COMMANDLINE}" "${KDUMP_COMMANDLINE_REMOVE}" "${KDUMP_COMMANDLINE_APPEND}")
# This is a workaround on AWS platform, since irqpoll may cause the hot-remove of some pci hotplug device
if is_aws_aarch64; then
KDUMP_COMMANDLINE=$(remove_cmdline_param "${KDUMP_COMMANDLINE}" irqpoll)
fi
# For secureboot enabled machines, use new kexec file based syscall.
# Old syscall will always fail as it does not have capability to
# to kernel signature verification.
if is_secure_boot_enforced; then
dinfo "Secure Boot is enabled. Using kexec file based syscall."
KEXEC_ARGS="$KEXEC_ARGS -s"
load_kdump_kernel_key
fi
ddebug "$KEXEC $KEXEC_ARGS $standard_kexec_args --command-line=$KDUMP_COMMANDLINE --initrd=$TARGET_INITRD $KDUMP_KERNEL"
# The '12' represents an intermediate temporary file descriptor
# to store the standard error file descriptor '2', and later
# restore the error file descriptor with the file descriptor '12'
# and release it.
exec 12>&2
exec 2>> $KDUMP_LOG_PATH/kdump.log
chmod 600 $KDUMP_LOG_PATH/kdump.log
PS4='+ $(date "+%Y-%m-%d %H:%M:%S") ${BASH_SOURCE}@${LINENO}: '
set -x
# shellcheck disable=SC2086
$KEXEC $KEXEC_ARGS $standard_kexec_args \
--command-line="$KDUMP_COMMANDLINE" \
--initrd="$TARGET_INITRD" "$KDUMP_KERNEL"
ret=$?
set +x
exec 2>&12 12>&-
remove_kdump_kernel_key
if [[ $ret == 0 ]]; then
dinfo "kexec: loaded kdump kernel"
return 0
else
derror "kexec: failed to load kdump kernel"
return 1
fi
}
check_ssh_config()
{
local target
[[ "${OPT[_fstype]}" == ssh ]] || return 0
target=$(ssh -G "${OPT[_target]}" | sed -n -e "s/^hostname[[:space:]]\+\([^[:space:]]*\).*$/\1/p")
[[ ${OPT[_target]} =~ .*@.* ]] || return 1
if [[ ${OPT[_target]#*@} != "$target" ]]; then
derror "Invalid ssh destination ${OPT[_target]} provided."
return 1
fi
return 0
}
# ipv6 host address may takes a long time to be ready.
# Instead of checking against ipv6 address, we just check the network reachable
# by the return val of 'ssh'
check_and_wait_network_ready()
{
local start_time
local warn_once=1
local cur
local diff
local retval
local errmsg
[[ "${OPT[_fstype]}" == ssh ]] || return 0
start_time=$(date +%s)
while true; do
errmsg=$(ssh -i "${OPT[sshkey]}" -o BatchMode=yes "${OPT[_target]}" mkdir -p "${OPT[path]}" 2>&1)
retval=$?
# ssh exits with the exit status of the remote command or with 255 if an error occurred
if [[ $retval -eq 0 ]]; then
return 0
elif [[ $retval -ne 255 ]]; then
derror "Could not create ${OPT[_target]}:${OPT[path]}, you should check the privilege on server side"
return 1
fi
# if server removes the authorized_keys or, no /root/.ssh/kdump_id_rsa
ddebug "$errmsg"
if echo "$errmsg" | grep -q "Permission denied\|No such file or directory\|Host key verification failed"; then
derror "Could not create ${OPT[_target]}:${OPT[path]}, you probably need to run \"kdumpctl propagate\""
return 1
fi
if [[ $warn_once -eq 1 ]]; then
dwarn "Network dump target is not usable, waiting for it to be ready..."
warn_once=0
fi
cur=$(date +%s)
diff=$((cur - start_time))
# time out after 180s
if [[ $diff -gt 180 ]]; then
break
fi
sleep 1
done
dinfo "Could not create ${OPT[_target]}:${OPT[path]}, ipaddr is not ready yet. You should check network connection"
return 1
}
propagate_ssh_key()
{
local SSH_USER SSH_SERVER
parse_config || return 1
if [[ ${OPT[_fstype]} != ssh ]] ; then
derror "No ssh destination defined in $KDUMP_CONFIG_FILE."
derror "Please verify that $KDUMP_CONFIG_FILE contains 'ssh <user>@<host>' and that it is properly formatted."
exit 1
fi
local KEYFILE=${OPT[sshkey]}
#Check to see if we already created key, if not, create it.
if [[ -f $KEYFILE ]]; then
dinfo "Using existing keys..."
else
dinfo "Generating new ssh keys... "
/usr/bin/ssh-keygen -t rsa -f "$KEYFILE" -N "" &> /dev/null
dinfo "done."
fi
SSH_USER=${OPT[_target]%@*}
SSH_SERVER=${OPT[_target]#*@}
if ssh-copy-id -i "$KEYFILE" "${OPT[_target]}"; then
dinfo "$KEYFILE has been added to ~$SSH_USER/.ssh/authorized_keys on $SSH_SERVER"
return 0
else
derror "Failed to propagate ssh key, could not transfer $KEYFILE to $SSH_SERVER"
exit 1
fi
}
show_reserved_mem()
{
local mem
local mem_mb
mem=$(< /sys/kernel/kexec_crash_size)
mem_mb=$((mem / 1024 / 1024))
dinfo "Reserved ${mem_mb}MB memory for crash kernel"
}
check_current_fadump_status()
{
# Check if firmware-assisted dump has been registered.
rc=$(< $FADUMP_REGISTER_SYS_NODE)
[[ $rc -eq 1 ]] && return 0
return 1
}
check_current_status()
{
if [[ $DEFAULT_DUMP_MODE == "fadump" ]]; then
check_current_fadump_status
else
check_current_kdump_status
fi
}
save_raw()
{
local raw_target
[[ ${OPT[_fstype]} == raw ]] || return 0
raw_target=${OPT[_target]}
[[ -b $raw_target ]] || {
derror "raw partition $raw_target not found"
return 1
}
check_fs=$(lsblk --nodeps -npo FSTYPE "$raw_target")
if [[ $(echo "$check_fs" | wc -w) -ne 0 ]]; then
dwarn "Warning: Detected '$check_fs' signature on $raw_target, data loss is expected."
return 0
fi
coredir="${OPT[path]}/$(date +"%Y-%m-%d-%H:%M")"
mkdir -p "$coredir"
[[ -d $coredir ]] || {
derror "failed to create $coredir"
return 1
}
if makedumpfile -R "$coredir/vmcore" < "$raw_target" > /dev/null 2>&1; then
# dump found
dinfo "Dump saved to $coredir/vmcore"
# wipe makedumpfile header
dd if=/dev/zero of="$raw_target" bs=1b count=1 2> /dev/null
else
rm -rf "$coredir"
fi
return 0
}
is_local_target()
{
[[ ${OPT[_fstype]} =~ ^ext[234]|^xfs|^btrfs|^minix ]]
}
path_to_be_relabeled()
{
local _path _mnt="/" _rmnt
if is_user_configured_dump_target; then
if is_mount_in_dracut_args; then
return
fi
if is_local_target; then
_mnt=$(get_mntpoint_from_target "${OPT[_target]}")
if ! is_mounted "$_mnt"; then
return
fi
else
return
fi
fi
_path=$(get_save_path)
# if $_path is masked by other mount, we will not relabel it.
_rmnt=$(df "$_mnt/$_path" 2> /dev/null | tail -1 | awk '{ print $NF }')
if [[ $_rmnt == "$_mnt" ]]; then
echo "$_mnt/$_path"
fi
}
selinux_relabel()
{
local _path _i _attr
_path=$(path_to_be_relabeled)
if [[ -z $_path ]] || ! [[ -d $_path ]]; then
return
fi
while IFS= read -r -d '' _i; do
_attr=$(getfattr -m "security.selinux" "$_i" 2> /dev/null)
if [[ -z $_attr ]]; then
restorecon "$_i"
fi
done < <(find "$_path" -print0)
}
check_fence_kdump_config()
{
local hostname
local ipaddrs
local nodes
hostname=$(hostname)
ipaddrs=$(hostname -I)
nodes=${OPT[fence_kdump_nodes]}
for node in $nodes; do
if [[ $node == "$hostname" ]]; then
derror "Option fence_kdump_nodes cannot contain $hostname"
return 1
fi
# node can be ipaddr
if echo "$ipaddrs " | grep -q "$node "; then
derror "Option fence_kdump_nodes cannot contain $node"
return 1
fi
done
return 0
}
check_dump_feasibility()
{
if [[ $DEFAULT_DUMP_MODE == "fadump" ]]; then
return 0
fi
check_kdump_feasibility
}
start_fadump()
{
echo 1 > $FADUMP_REGISTER_SYS_NODE
if ! check_current_fadump_status; then
derror "fadump: failed to register"
return 1
fi
dinfo "fadump: registered successfully"
return 0
}
start_dump()
{
if [[ $DEFAULT_DUMP_MODE == "fadump" ]]; then
start_fadump
else
load_kdump
fi
}
check_failure_action_config()
{
local default_option
local failure_action
local option="failure_action"
default_option=${OPT[default]}
failure_action=${OPT[failure_action]}
if [[ -z $failure_action ]] && [[ -z $default_option ]]; then
return 0
elif [[ -n $failure_action ]] && [[ -n $default_option ]]; then
derror "Cannot specify 'failure_action' and 'default' option together"
return 1
fi
if [[ -n $default_option ]]; then
option="default"
failure_action="$default_option"
fi
case "$failure_action" in
reboot | halt | poweroff | shell | dump_to_rootfs)
return 0
;;
*)
dinfo $"Usage kdump.conf: $option {reboot|halt|poweroff|shell|dump_to_rootfs}"
return 1
;;
esac
}
check_final_action_config()
{
local final_action
final_action=${OPT[final_action]}
if [[ -z $final_action ]]; then
return 0
else
case "$final_action" in
reboot | halt | poweroff)
return 0
;;
*)
dinfo $"Usage kdump.conf: final_action {reboot|halt|poweroff}"
return 1
;;
esac
fi
}
start()
{
if ! check_dump_feasibility; then
derror "Starting kdump: [FAILED]"
return 1
fi
if ! parse_config; then
derror "Starting kdump: [FAILED]"
return 1
fi
if sestatus 2> /dev/null | grep -q "SELinux status.*enabled"; then
selinux_relabel
fi
if ! save_raw; then
derror "Starting kdump: [FAILED]"
return 1
fi
if [[ $DEFAULT_DUMP_MODE == "kdump" ]] && check_current_kdump_status; then
dwarn "Kdump already running: [WARNING]"
return 0
fi
if ! check_and_wait_network_ready; then
derror "Starting kdump: [FAILED]"
return 1
fi
if ! check_rebuild; then
derror "Starting kdump: [FAILED]"
return 1
fi
if ! start_dump; then
derror "Starting kdump: [FAILED]"
return 1
fi
dinfo "Starting kdump: [OK]"
}
reload()
{
if ! check_current_status; then
dwarn "Kdump was not running: [WARNING]"
fi
if [[ $DEFAULT_DUMP_MODE == "fadump" ]]; then
reload_fadump
return
else
if ! stop_kdump; then
derror "Stopping kdump: [FAILED]"
return 1
fi
fi
dinfo "Stopping kdump: [OK]"
if ! setup_initrd; then
derror "Starting kdump: [FAILED]"
return 1
fi
if ! start_dump; then
derror "Starting kdump: [FAILED]"
return 1
fi
dinfo "Starting kdump: [OK]"
}
stop_fadump()
{
echo 0 > $FADUMP_REGISTER_SYS_NODE
if check_current_fadump_status; then
derror "fadump: failed to unregister"
return 1
fi
dinfo "fadump: unregistered successfully"
return 0
}
stop_kdump()
{
if is_secure_boot_enforced; then
$KEXEC -s -p -u
else
$KEXEC -p -u
fi
# shellcheck disable=SC2181
if [[ $? != 0 ]]; then
derror "kexec: failed to unload kdump kernel"
return 1
fi
dinfo "kexec: unloaded kdump kernel"
return 0
}
reload_fadump()
{
if echo 1 > $FADUMP_REGISTER_SYS_NODE; then
dinfo "fadump: re-registered successfully"
return 0
else
# FADump could fail on older kernel where re-register
# support is not enabled. Try stop/start from userspace
# to handle such scenario.
if stop_fadump; then
start_fadump
return
fi
fi
return 1
}
stop()
{
if [[ $DEFAULT_DUMP_MODE == "fadump" ]]; then
stop_fadump
else
stop_kdump
fi
# shellcheck disable=SC2181
if [[ $? != 0 ]]; then
derror "Stopping kdump: [FAILED]"
return 1
fi
dinfo "Stopping kdump: [OK]"
return 0
}
rebuild()
{
parse_config || return 1
check_and_wait_network_ready || return 1
setup_initrd || return 1
dinfo "Rebuilding $TARGET_INITRD"
rebuild_initrd
}
do_estimate()
{
local kdump_mods
local -A large_mods
local baseline
local kernel_size mod_size initrd_size baseline_size runtime_size reserved_size estimated_size recommended_size _cryptsetup_overhead
local size_mb=$((1024 * 1024))
setup_initrd
if [[ ! -f $TARGET_INITRD ]]; then
derror "kdumpctl estimate: kdump initramfs is not built yet."
exit 1
fi
kdump_mods="$(lsinitrd "$TARGET_INITRD" -f /usr/lib/dracut/hostonly-kernel-modules.txt | tr '\n' ' ')"
baseline=$(kdump_get_arch_recommend_size)
if [[ ${baseline: -1} == "M" ]]; then
baseline=${baseline%M}
elif [[ ${baseline: -1} == "G" ]]; then
baseline=$((${baseline%G} * 1024))
elif [[ ${baseline: -1} == "T" ]]; then
baseline=$((${baseline%Y} * 1048576))
fi
# The default pre-reserved crashkernel value
baseline_size=$((baseline * size_mb))
# Current reserved crashkernel size
reserved_size=$(< /sys/kernel/kexec_crash_size)
# A pre-estimated value for userspace usage and kernel
# runtime allocation, 64M should good for most cases
runtime_size=$((64 * size_mb))
# Kernel image size
kernel_size=$(get_kernel_size "$KDUMP_KERNEL")
# Kdump initramfs size
initrd_size=$(du -b "$TARGET_INITRD" | awk '{print $1}')
# Kernel modules static size after loaded
mod_size=0
while read -r _name _size _; do
if [[ " $kdump_mods " != *" $_name "* ]]; then
continue
fi
mod_size=$((mod_size + _size))
# Mark module with static size larger than 2M as large module
if [[ $((_size / size_mb)) -ge 1 ]]; then
large_mods[$_name]=$_size
fi
done <<< "$(< /proc/modules)"
# Extra memory usage required for LUKS2 decryption
crypt_size=0
for _dev in $(get_all_kdump_crypt_dev); do
_crypt_info=$(cryptsetup luksDump "/dev/block/$_dev")
[[ $(echo "$_crypt_info" | sed -n "s/^Version:\s*\(.*\)/\1/p") == "2" ]] || continue
for _mem in $(echo "$_crypt_info" | sed -n "s/\sMemory:\s*\(.*\)/\1/p" | sort -n -r); do
crypt_size=$((crypt_size + _mem * 1024))
break
done
done
if [[ $crypt_size -ne 0 ]]; then
if [[ $(uname -m) == aarch64 ]]; then
_cryptsetup_overhead=50
else
_cryptsetup_overhead=20
fi
crypt_size=$((crypt_size + _cryptsetup_overhead * size_mb))
echo -e "Encrypted kdump target requires extra memory, assuming using the keyslot with maximum memory requirement\n"
fi
estimated_size=$((kernel_size + mod_size + initrd_size + runtime_size + crypt_size))
if [[ $baseline_size -gt $estimated_size ]]; then
recommended_size=$baseline_size
else
recommended_size=$estimated_size
fi
echo "Reserved crashkernel: $((reserved_size / size_mb))M"
echo "Recommended crashkernel: $((recommended_size / size_mb))M"
echo
echo "Kernel image size: $((kernel_size / size_mb))M"
echo "Kernel modules size: $((mod_size / size_mb))M"
echo "Initramfs size: $((initrd_size / size_mb))M"
echo "Runtime reservation: $((runtime_size / size_mb))M"
[[ $crypt_size -ne 0 ]] &&
echo "LUKS required size: $((crypt_size / size_mb))M"
echo -n "Large modules:"
if [[ ${#large_mods[@]} -eq 0 ]]; then
echo " <none>"
else
echo ""
for _mod in "${!large_mods[@]}"; do
echo " $_mod: ${large_mods[$_mod]}"
done
fi
if [[ $reserved_size -lt $recommended_size ]]; then
echo "WARNING: Current crashkernel size is lower than recommended size $((recommended_size / size_mb))M."
fi
}
get_default_crashkernel()
{
local _dump_mode=$1
kdump_get_arch_recommend_crashkernel "$_dump_mode"
}
# Read kernel cmdline parameter for a specific kernel
# $1: kernel path, DEFAULT or kernel path, ALL not accepted
# $2: kernel cmldine parameter
get_grub_kernel_boot_parameter()
{
local _kernel_path=$1 _para=$2
[[ $_kernel_path == ALL ]] && derror "kernel_path=ALL invalid for get_grub_kernel_boot_parameter" && return 1
grubby --info="$_kernel_path" | sed -En -e "/^args=.*$/{s/^.*(\s|\")${_para}=(\S*).*\"$/\2/p;q}"
}
# get dump mode by fadump value
# return
# - fadump, if fadump=on or fadump=nocma
# - kdump, if fadump=off or empty fadump, return kdump
# - error if otherwise
get_dump_mode_by_fadump_val()
{
local _fadump_val=$1
if [[ -z $_fadump_val ]] || [[ $_fadump_val == off ]]; then
echo -n kdump
elif [[ $_fadump_val == on ]] || [[ $_fadump_val == nocma ]]; then
echo -n fadump
else
derror "invalid fadump=$_fadump_val"
return 1
fi
}
# get dump mode of a specific kernel
# based on its fadump kernel cmdline parameter
get_dump_mode_by_kernel()
{
local _kernel_path=$1 _fadump_val _dump_mode
_fadump_val=$(get_grub_kernel_boot_parameter "$_kernel_path" fadump)
if _dump_mode=$(get_dump_mode_by_fadump_val "$_fadump_val"); then
echo -n "$_dump_mode"
else
derror "failed to get dump mode for kernel $_kernel_path"
exit
fi
}
_filter_grubby_kernel_str()
{
local _grubby_kernel_str=$1
echo -n "$_grubby_kernel_str" | sed -n -e 's/^kernel="\(.*\)"/\1/p'
}
_find_kernel_path_by_release()
{
local _release="$1" _grubby_kernel_str _kernel_path
_grubby_kernel_str=$(grubby --info ALL | grep "^kernel=.*$_release\"$")
_kernel_path=$(_filter_grubby_kernel_str "$_grubby_kernel_str")
if [[ -z $_kernel_path ]]; then
derror "kernel $_release doesn't exist"
return 1
fi
echo -n "$_kernel_path"
}
_get_current_running_kernel_path()
{
local _release _path
_release=$(uname -r)
if _path=$(_find_kernel_path_by_release "$_release"); then
echo -n "$_path"
else
return 1
fi
}
_update_kernel_cmdline()
{
local _kernel_path=$1 _crashkernel=$2 _dump_mode=$3 _fadump_val=$4
if is_ostree; then
if rpm-ostree kargs | grep -q "crashkernel="; then
rpm-ostree kargs --replace="crashkernel=$_crashkernel"
else
rpm-ostree kargs --append="crashkernel=$_crashkernel"
fi
else
grubby --args "crashkernel=$_crashkernel" --update-kernel "$_kernel_path"
if [[ $_dump_mode == kdump ]]; then
grubby --remove-args="fadump" --update-kernel "$_kernel_path"
else
grubby --args="fadump=$_fadump_val" --update-kernel "$_kernel_path"
fi
fi
[[ -f /etc/zipl.conf ]] && zipl > /dev/null
}
_valid_grubby_kernel_path()
{
[[ -n "$1" ]] && grubby --info="$1" > /dev/null 2>&1
}
# return all the kernel paths given a grubby kernel-path
#
# $1: kernel path accepted by grubby, e.g. DEFAULT, ALL,
# /boot/vmlinuz-`uname -r`
# return: kernel paths separated by space
_get_all_kernels_from_grubby()
{
local _kernels _line _kernel_path _grubby_kernel_path=$1
for _line in $(grubby --info "$_grubby_kernel_path" | grep "^kernel="); do
_kernel_path=$(_filter_grubby_kernel_str "$_line")
_kernels="$_kernels $_kernel_path"
done
echo -n "$_kernels"
}
GRUB_ETC_DEFAULT="/etc/default/grub"
# Update a kernel parameter in default grub conf
#
# If a value is specified, it will be inserted in the end. Otherwise it
# would remove given kernel parameter.
#
# Note this function doesn't address the following cases,
# 1. The kernel ignores everything on the command line after a '--'. So
# simply adding the new entry to the end will fail if the cmdline
# contains a --.
# 2. If the value for a parameter contains spaces it can be quoted using
# double quotes, for example param="value with spaces". This will
# break the [^[:space:]\"] regex for the value.
# 3. Dashes and underscores in the parameter name are equivalent. So
# some_parameter and some-parameter are identical.
# 4. Some parameters, e.g. efivar_ssdt, can be given multiple times.
# 5. Some kernel parameters, e.g. quiet, doesn't have value
#
# $1: the name of the kernel command line parameter
# $2: new value. If empty, given parameter would be removed
_update_kernel_arg_in_grub_etc_default()
{
local _para=$1 _val=$2 _para_val
if [[ $(uname -m) == s390x ]]; then
return
fi
if [[ -n $_val ]]; then
_para_val="$_para=$_val"
fi
# Update the command line /etc/default/grub, i.e.
# on the line that starts with 'GRUB_CMDLINE_LINUX=',
# 1) remove $para=$val if the it's the first arg
# 2) remove all occurences of $para=$val
# 3) insert $_para_val to end
# 4) remove duplicate spaces left over by 1) or 2) or 3)
# 5) remove space at the beginning of the string left over by 1) or 2) or 3)
# 6) remove space at the end of the string left over by 1) or 2) or 3)
sed -i -E "/^GRUB_CMDLINE_LINUX=/ {
s/\"${_para}=[^[:space:]\"]*/\"/g;
s/[[:space:]]+${_para}=[^[:space:]\"]*/ /g;
s/\"$/ ${_para_val}\"/
s/[[:space:]]+/ /g;
s/(\")[[:space:]]+/\1/g;
s/[[:space:]]+(\")/\1/g;
}" "$GRUB_ETC_DEFAULT"
}
# Read the kernel arg in default grub conf.
# Note reading a kernel parameter that doesn't have a value isn't supported.
#
# $1: the name of the kernel command line parameter
_read_kernel_arg_in_grub_etc_default()
{
sed -n -E "s/^GRUB_CMDLINE_LINUX=.*[[:space:]\"]${1}=([^[:space:]\"]*).*$/\1/p" "$GRUB_ETC_DEFAULT"
}
reset_crashkernel()
{
local _opt _val _dump_mode _fadump_val _reboot _grubby_kernel_path _kernel _kernels
local _old_crashkernel _new_crashkernel _new_dump_mode _crashkernel_changed
local _new_fadump_val _old_fadump_val _what_is_updated
for _opt in "$@"; do
case "$_opt" in
--fadump=*)
_val=${_opt#*=}
if _dump_mode=$(get_dump_mode_by_fadump_val $_val); then
_fadump_val=$_val
else
derror "failed to determine dump mode"
exit
fi
;;
--kernel=*)
_val=${_opt#*=}
if ! _valid_grubby_kernel_path $_val; then
derror "Invalid $_opt, please specify a valid kernel path, ALL or DEFAULT"
exit
fi
_grubby_kernel_path=$_val
;;
--reboot)
_reboot=yes
;;
*)
derror "$_opt not recognized"
exit 1
;;
esac
done
# 1. OSTree systems use "rpm-ostree kargs" instead of grubby to manage kernel command
# line. --kernel=ALL doesn't make sense for OStree.
# 2. We don't have any OSTree POWER systems so the dump mode is always kdump.
# 3. "rpm-ostree kargs" would prompt the user to reboot the system after
# modifying the kernel command line so there is no need for kexec-tools
# to repeat it.
if is_ostree; then
_old_crashkernel=$(rpm-ostree kargs | sed -n -E 's/.*(^|\s)crashkernel=(\S*).*/\2/p')
_new_dump_mode=kdump
_new_crashkernel=$(kdump_get_arch_recommend_crashkernel "$_new_dump_mode")
if [[ $_old_crashkernel != "$_new_crashkernel" ]]; then
_update_kernel_cmdline "" "$_new_crashkernel" "$_new_dump_mode" ""
if [[ $_reboot == yes ]]; then
systemctl reboot
fi
fi
return
fi
# For non-ppc64le systems, the dump mode is always kdump since only ppc64le
# has FADump.
if [[ -z $_dump_mode && $(uname -m) != ppc64le ]]; then
_dump_mode=kdump
_fadump_val=off
fi
# If the dump mode is determined, we can also know the default crashkernel value
if [[ -n $_dump_mode ]]; then
_crashkernel=$(kdump_get_arch_recommend_crashkernel "$_dump_mode")
fi
# If --kernel-path=ALL, update GRUB_CMDLINE_LINUX in /etc/default/grub.
#
# An exception case is when the ppc64le user doesn't specify the fadump value.
# In this case, the dump mode would be determined by parsing the kernel
# command line of the kernel(s) to be updated thus don't update GRUB_CMDLINE_LINUX.
#
# The following code has been simplified because of what has been done early,
# - set the dump mode as kdump for non-ppc64le cases
# - retrieved the default crashkernel value for given dump mode
if [[ $_grubby_kernel_path == ALL && -n $_dump_mode ]]; then
_update_kernel_arg_in_grub_etc_default crashkernel "$_crashkernel"
# remove the fadump if fadump is disabled
if [[ $_fadump_val == off ]]; then
_fadump_val=""
fi
_update_kernel_arg_in_grub_etc_default fadump "$_fadump_val"
fi
# If kernel-path not specified, either
# - use KDUMP_KERNELVER if it's defined
# - use current running kernel
if [[ -z $_grubby_kernel_path ]]; then
if [[ -z $KDUMP_KERNELVER ]] ||
! _kernel_path=$(_find_kernel_path_by_release "$KDUMP_KERNELVER"); then
if ! _kernel_path=$(_get_current_running_kernel_path); then
derror "no running kernel found"
exit 1
fi
fi
_kernels=$_kernel_path
else
_kernels=$(_get_all_kernels_from_grubby "$_grubby_kernel_path")
fi
for _kernel in $_kernels; do
if [[ -z $_dump_mode ]]; then
_new_dump_mode=$(get_dump_mode_by_kernel "$_kernel")
_new_crashkernel=$(kdump_get_arch_recommend_crashkernel "$_new_dump_mode")
_new_fadump_val=$(get_grub_kernel_boot_parameter "$_kernel" fadump)
else
_new_dump_mode=$_dump_mode
_new_crashkernel=$_crashkernel
_new_fadump_val=$_fadump_val
fi
_old_crashkernel=$(get_grub_kernel_boot_parameter "$_kernel" crashkernel)
_old_fadump_val=$(get_grub_kernel_boot_parameter "$_kernel" fadump)
if [[ $_old_crashkernel != "$_new_crashkernel" || $_old_fadump_val != "$_new_fadump_val" ]]; then
_update_kernel_cmdline "$_kernel" "$_new_crashkernel" "$_new_dump_mode" "$_new_fadump_val"
if [[ $_reboot != yes ]]; then
if [[ $_old_crashkernel != "$_new_crashkernel" ]]; then
_what_is_updated="Updated crashkernel=$_new_crashkernel"
else
# This case happens only when switching between fadump=on and fadump=nocma
_what_is_updated="Updated fadump=$_new_fadump_val"
fi
dwarn "$_what_is_updated for kernel=$_kernel. Please reboot the system for the change to take effect."
fi
_crashkernel_changed=yes
fi
done
if [[ $_reboot == yes && $_crashkernel_changed == yes ]]; then
reboot
fi
}
_is_bootloader_installed()
{
if [[ $(uname -r) == s390x ]]; then
test -f /etc/zipl.conf
else
test -f /boot/grub2/grub.cfg
fi
}
# update the crashkernel value in GRUB_ETC_DEFAULT if necessary
#
# called by reset_crashkernel_after_update and inherit its array variable
# _crashkernel_vals
update_crashkernel_in_grub_etc_default_after_update()
{
local _crashkernel _fadump_val
local _dump_mode _old_default_crashkernel _new_default_crashkernel
if [[ $(uname -m) == s390x ]]; then
return
fi
_crashkernel=$(_read_kernel_arg_in_grub_etc_default crashkernel)
if [[ -z $_crashkernel ]]; then
return
fi
_fadump_val=$(_read_kernel_arg_in_grub_etc_default fadump)
_dump_mode=$(get_dump_mode_by_fadump_val "$_fadump_val")
_old_default_crashkernel=${_crashkernel_vals[old_${_dump_mode}]}
_new_default_crashkernel=${_crashkernel_vals[new_${_dump_mode}]}
if [[ $_crashkernel == auto ]] ||
[[ $_crashkernel == "$_old_default_crashkernel" &&
$_new_default_crashkernel != "$_old_default_crashkernel" ]]; then
_update_kernel_arg_in_grub_etc_default crashkernel "$_new_default_crashkernel"
fi
}
# shellcheck disable=SC2154 # false positive when dereferencing an array
reset_crashkernel_after_update()
{
local _kernel _crashkernel _dump_mode _fadump_val _old_default_crashkernel _new_default_crashkernel
declare -A _crashkernel_vals
if ! _is_bootloader_installed; then
return
fi
_crashkernel_vals[old_kdump]=$(cat /tmp/old_default_crashkernel 2> /dev/null)
_crashkernel_vals[old_fadump]=$(cat /tmp/old_default_crashkernel_fadump 2> /dev/null)
_crashkernel_vals[new_kdump]=$(get_default_crashkernel kdump)
_crashkernel_vals[new_fadump]=$(get_default_crashkernel fadump)
for _kernel in $(_get_all_kernels_from_grubby ALL); do
_crashkernel=$(get_grub_kernel_boot_parameter "$_kernel" crashkernel)
if [[ $_crashkernel == auto ]]; then
reset_crashkernel "--kernel=$_kernel"
elif [[ -n $_crashkernel ]]; then
_dump_mode=$(get_dump_mode_by_kernel "$_kernel")
_old_default_crashkernel=${_crashkernel_vals[old_${_dump_mode}]}
_new_default_crashkernel=${_crashkernel_vals[new_${_dump_mode}]}
if [[ $_crashkernel == "$_old_default_crashkernel" ]] &&
[[ $_new_default_crashkernel != "$_old_default_crashkernel" ]]; then
_fadump_val=$(get_grub_kernel_boot_parameter "$_kernel" fadump)
if _update_kernel_cmdline "$_kernel" "$_new_default_crashkernel" "$_dump_mode" "$_fadump_val"; then
echo "For kernel=$_kernel, crashkernel=$_new_default_crashkernel now."
fi
fi
fi
done
update_crashkernel_in_grub_etc_default_after_update
}
# read the value of an environ variable from given environ file path
#
# The environment variable entries in /proc/[pid]/environ are separated
# by null bytes instead of by spaces.
#
# $1: environment variable
# $2: environ file path
read_proc_environ_var()
{
local _var=$1 _environ_path=$2
sed -n -E "s/.*(^|\x00)${_var}=([^\x00]*).*/\2/p" < "$_environ_path"
}
_OSBUILD_ENVIRON_PATH='/proc/1/environ'
_is_osbuild()
{
[[ $(read_proc_environ_var container "$_OSBUILD_ENVIRON_PATH") == bwrap-osbuild ]]
}
reset_crashkernel_for_installed_kernel()
{
local _installed_kernel _running_kernel _crashkernel _crashkernel_running
local _dump_mode_running _fadump_val_running
# During package install, only try to reset crashkernel for osbuild
# thus to avoid calling grubby when installing os via anaconda
if ! _is_bootloader_installed && ! _is_osbuild; then
return
fi
if ! _installed_kernel=$(_find_kernel_path_by_release "$1"); then
exit 1
fi
if _is_osbuild; then
if ! grep -qs crashkernel= /etc/kernel/cmdline; then
reset_crashkernel "--kernel=$_installed_kernel"
fi
return
fi
if ! _running_kernel=$(_get_current_running_kernel_path); then
derror "Couldn't find current running kernel"
exit
fi
_crashkernel=$(get_grub_kernel_boot_parameter "$_installed_kernel" crashkernel)
_crashkernel_running=$(get_grub_kernel_boot_parameter "$_running_kernel" crashkernel)
_dump_mode_running=$(get_dump_mode_by_kernel "$_running_kernel")
_fadump_val_running=$(get_grub_kernel_boot_parameter "$_kernel" fadump)
if [[ $_crashkernel != "$_crashkernel_running" ]]; then
if _update_kernel_cmdline "$_installed_kernel" "$_crashkernel_running" "$_dump_mode_running" "$_fadump_val_running"; then
echo "kexec-tools has reset $_installed_kernel to use the new default crashkernel value $_crashkernel_running"
fi
fi
}
main()
{
# Determine if the dump mode is kdump or fadump
determine_dump_mode
case "$1" in
start)
start
;;
stop)
stop
;;
status)
EXIT_CODE=0
check_current_status
case "$?" in
0)
dinfo "Kdump is operational"
EXIT_CODE=0
;;
1)
dinfo "Kdump is not operational"
EXIT_CODE=3
;;
esac
exit $EXIT_CODE
;;
reload)
reload
;;
restart)
stop
start
;;
rebuild)
rebuild
;;
condrestart) ;;
propagate)
propagate_ssh_key
;;
showmem)
show_reserved_mem
;;
estimate)
do_estimate
;;
get-default-crashkernel)
get_default_crashkernel "$2"
;;
reset-crashkernel)
shift
reset_crashkernel "$@"
;;
_reset-crashkernel-after-update)
if [[ $(kdump_get_conf_val auto_reset_crashkernel) != no ]]; then
reset_crashkernel_after_update
fi
;;
_reset-crashkernel-for-installed_kernel)
if [[ $(kdump_get_conf_val auto_reset_crashkernel) != no ]]; then
reset_crashkernel_for_installed_kernel "$2"
fi
;;
*)
dinfo $"Usage: $0 {estimate|start|stop|status|restart|reload|rebuild|reset-crashkernel|propagate|showmem}"
exit 1
;;
esac
}
if [[ ${__SOURCED__:+x} ]]; then
return
fi
if [[ ! -f $KDUMP_CONFIG_FILE ]]; then
derror "Error: No kdump config file found!"
exit 1
fi
# Other kdumpctl instances will block in queue, until this one exits
single_instance_lock
# To avoid fd 9 leaking, we invoke a subshell, close fd 9 and call main.
# So that fd isn't leaking when main is invoking a subshell.
(
exec 9<&-
main "$@"
)