kexec-tools/dracut-module-setup.sh
Kairui Song f6770b30c3 dracut-module-setup: Fix DRM module inclusion test for hyper-v
We test if to include the drm module or not by testing if there are any
drm entry in sysfs. But there is an exception for hyper-v, DRM module
take care of hyperv's framebuffer driver as well but hyperv_fb will
not create any drm entry. So currently we got black screen on
hyperv guest.

Fix by detect hyperv's special entry as well.

Signed-off-by: Kairui Song <kasong@redhat.com>
2018-08-07 17:22:05 +08:00

772 lines
24 KiB
Bash
Executable File

#!/bin/bash
. $dracutfunctions
. /lib/kdump/kdump-lib.sh
if ! [[ -d "${initdir}/tmp" ]]; then
mkdir -p "${initdir}/tmp"
fi
check() {
[[ $debug ]] && set -x
#kdumpctl sets this explicitly
if [ -z "$IN_KDUMP" ] || [ ! -f /etc/kdump.conf ]
then
return 1
fi
return 0
}
depends() {
local _dep="base shutdown"
if [ -n "$( find /sys/devices -name drm )" ] || [ -d /sys/module/hyperv_fb ]; then
_dep="$_dep drm"
fi
if is_generic_fence_kdump -o is_pcs_fence_kdump; then
_dep="$_dep network"
fi
echo $_dep
return 0
}
kdump_get_persistent_dev() {
local dev="${1//\"/}"
case "$dev" in
UUID=*)
dev=`blkid -U "${dev#UUID=}"`
;;
LABEL=*)
dev=`blkid -L "${dev#LABEL=}"`
;;
esac
echo $(get_persistent_dev "$dev")
}
kdump_is_bridge() {
[ -d /sys/class/net/"$1"/bridge ]
}
kdump_is_bond() {
[ -d /sys/class/net/"$1"/bonding ]
}
kdump_is_team() {
[ -f /usr/bin/teamnl ] && teamnl $1 ports &> /dev/null
}
kdump_is_vlan() {
[ -f /proc/net/vlan/"$1" ]
}
# $1: netdev name
source_ifcfg_file() {
local ifcfg_file
ifcfg_file=$(get_ifcfg_filename $1)
if [ -f "${ifcfg_file}" ]; then
. ${ifcfg_file}
else
dwarning "The ifcfg file of $1 is not found!"
fi
}
# $1: netdev name
kdump_setup_dns() {
local _nameserver _dns
local _dnsfile=${initdir}/etc/cmdline.d/42dns.conf
source_ifcfg_file $1
[ -n "$DNS1" ] && echo "nameserver=$DNS1" > "$_dnsfile"
[ -n "$DNS2" ] && echo "nameserver=$DNS2" >> "$_dnsfile"
while read content;
do
_nameserver=$(echo $content | grep ^nameserver)
[ -z "$_nameserver" ] && continue
_dns=$(echo $_nameserver | cut -d' ' -f2)
[ -z "$_dns" ] && continue
if [ ! -f $_dnsfile ] || [ ! $(cat $_dnsfile | grep -q $_dns) ]; then
echo "nameserver=$_dns" >> "$_dnsfile"
fi
done < "/etc/resolv.conf"
}
#$1: netdev name
#$2: srcaddr
#if it use static ip echo it, or echo null
kdump_static_ip() {
local _netdev="$1" _srcaddr="$2" _ipv6_flag
local _netmask _gateway _ipaddr _target _nexthop
_ipaddr=$(ip addr show dev $_netdev permanent | awk "/ $_srcaddr\/.* /{print \$2}")
if is_ipv6_address $_srcaddr; then
_ipv6_flag="-6"
fi
if [ -n "$_ipaddr" ]; then
_gateway=$(ip $_ipv6_flag route list dev $_netdev | \
awk '/^default /{print $3}' | head -n 1)
if [ "x" != "x"$_ipv6_flag ]; then
# _ipaddr="2002::56ff:feb6:56d5/64", _netmask is the number after "/"
_netmask=${_ipaddr#*\/}
_srcaddr="[$_srcaddr]"
_gateway="[$_gateway]"
else
_netmask=$(ipcalc -m $_ipaddr | cut -d'=' -f2)
fi
echo -n "${_srcaddr}::${_gateway}:${_netmask}::"
fi
/sbin/ip $_ipv6_flag route show | grep -v default | grep ".*via.* $_netdev " |\
while read _route; do
_target=`echo $_route | cut -d ' ' -f1`
_nexthop=`echo $_route | cut -d ' ' -f3`
if [ "x" != "x"$_ipv6_flag ]; then
_target="[$_target]"
_nexthop="[$_nexthop]"
fi
echo "rd.route=$_target:$_nexthop:$_netdev"
done >> ${initdir}/etc/cmdline.d/45route-static.conf
}
kdump_get_mac_addr() {
cat /sys/class/net/$1/address
}
#Bonding or team master modifies the mac address
#of its slaves, we should use perm address
kdump_get_perm_addr() {
local addr=$(ethtool -P $1 | sed -e 's/Permanent address: //')
if [ -z "$addr" ] || [ "$addr" = "00:00:00:00:00:00" ]
then
derror "Can't get the permanent address of $1"
else
echo "$addr"
fi
}
# Prefix kernel assigned names with "kdump-". EX: eth0 -> kdump-eth0
# Because kernel assigned names are not persistent between 1st and 2nd
# kernel. We could probably end up with eth0 being eth1, eth0 being
# eth1, and naming conflict happens.
kdump_setup_ifname() {
local _ifname
# If ifname already has 'kdump-' prefix, we must be switching from
# fadump to kdump. Skip prefixing 'kdump-' in this case as adding
# another prefix may truncate the ifname. Since an ifname with
# 'kdump-' is already persistent, this should be fine.
if [[ $1 =~ eth* ]] && [[ ! $1 =~ ^kdump-* ]]; then
_ifname="kdump-$1"
else
_ifname="$1"
fi
echo "$_ifname"
}
kdump_setup_bridge() {
local _netdev=$1
local _brif _dev _mac _kdumpdev
for _dev in `ls /sys/class/net/$_netdev/brif/`; do
_kdumpdev=$_dev
if kdump_is_bond "$_dev"; then
kdump_setup_bond "$_dev"
elif kdump_is_team "$_dev"; then
kdump_setup_team "$_dev"
elif kdump_is_vlan "$_dev"; then
kdump_setup_vlan "$_dev"
else
_mac=$(kdump_get_mac_addr $_dev)
_kdumpdev=$(kdump_setup_ifname $_dev)
echo -n " ifname=$_kdumpdev:$_mac" >> ${initdir}/etc/cmdline.d/41bridge.conf
fi
_brif+="$_kdumpdev,"
done
echo " bridge=$_netdev:$(echo $_brif | sed -e 's/,$//')" >> ${initdir}/etc/cmdline.d/41bridge.conf
}
kdump_setup_bond() {
local _netdev=$1
local _dev _mac _slaves _kdumpdev
for _dev in `cat /sys/class/net/$_netdev/bonding/slaves`; do
_mac=$(kdump_get_perm_addr $_dev)
_kdumpdev=$(kdump_setup_ifname $_dev)
echo -n " ifname=$_kdumpdev:$_mac" >> ${initdir}/etc/cmdline.d/42bond.conf
_slaves+="$_kdumpdev,"
done
echo -n " bond=$_netdev:$(echo $_slaves | sed 's/,$//')" >> ${initdir}/etc/cmdline.d/42bond.conf
# Get bond options specified in ifcfg
source_ifcfg_file $_netdev
bondoptions="$(echo :$BONDING_OPTS | sed 's/\s\+/,/')"
echo "$bondoptions" >> ${initdir}/etc/cmdline.d/42bond.conf
}
kdump_setup_team() {
local _netdev=$1
local _dev _mac _slaves _kdumpdev
for _dev in `teamnl $_netdev ports | awk -F':' '{print $2}'`; do
_mac=$(kdump_get_perm_addr $_dev)
_kdumpdev=$(kdump_setup_ifname $_dev)
echo -n " ifname=$_kdumpdev:$_mac" >> ${initdir}/etc/cmdline.d/44team.conf
_slaves+="$_kdumpdev,"
done
echo " team=$_netdev:$(echo $_slaves | sed -e 's/,$//')" >> ${initdir}/etc/cmdline.d/44team.conf
#Buggy version teamdctl outputs to stderr!
#Try to use the latest version of teamd.
teamdctl "$_netdev" config dump > ${initdir}/tmp/$$-$_netdev.conf
if [ $? -ne 0 ]
then
derror "teamdctl failed."
exit 1
fi
inst_dir /etc/teamd
inst_simple ${initdir}/tmp/$$-$_netdev.conf "/etc/teamd/$_netdev.conf"
rm -f ${initdir}/tmp/$$-$_netdev.conf
}
kdump_setup_vlan() {
local _netdev=$1
local _phydev="$(awk '/^Device:/{print $2}' /proc/net/vlan/"$_netdev")"
local _netmac="$(kdump_get_mac_addr $_phydev)"
local _kdumpdev
#Just support vlan over bond, it is not easy
#to support all other complex setup
if kdump_is_bridge "$_phydev"; then
derror "Vlan over bridge is not supported!"
exit 1
elif kdump_is_team "$_phydev"; then
derror "Vlan over team is not supported!"
exit 1
elif kdump_is_bond "$_phydev"; then
kdump_setup_bond "$_phydev"
echo " vlan=$_netdev:$_phydev" > ${initdir}/etc/cmdline.d/43vlan.conf
else
_kdumpdev="$(kdump_setup_ifname $_phydev)"
echo " vlan=$_netdev:$_kdumpdev ifname=$_kdumpdev:$_netmac" > ${initdir}/etc/cmdline.d/43vlan.conf
fi
}
# setup s390 znet cmdline
# $1: netdev name
kdump_setup_znet() {
local _options=""
source_ifcfg_file $1
for i in $OPTIONS; do
_options=${_options},$i
done
echo rd.znet=${NETTYPE},${SUBCHANNELS}${_options} > ${initdir}/etc/cmdline.d/30znet.conf
}
# Setup dracut to bringup a given network interface
kdump_setup_netdev() {
local _netdev=$1 _srcaddr=$2
local _static _proto _ip_conf _ip_opts _ifname_opts
local _netmac=$(kdump_get_mac_addr $_netdev)
if [ "$(uname -m)" = "s390x" ]; then
kdump_setup_znet $_netdev
fi
_static=$(kdump_static_ip $_netdev $_srcaddr)
if [ -n "$_static" ]; then
_proto=none
elif is_ipv6_address $_srcaddr; then
_proto=either6
else
_proto=dhcp
fi
_ip_conf="${initdir}/etc/cmdline.d/40ip.conf"
_ip_opts=" ip=${_static}$(kdump_setup_ifname $_netdev):${_proto}"
# dracut doesn't allow duplicated configuration for same NIC, even they're exactly the same.
# so we have to avoid adding duplicates
# We should also check /proc/cmdline for existing ip=xx arg.
# For example, iscsi boot will specify ip=xxx arg in cmdline.
if [ ! -f $_ip_conf ] || ! grep -q $_ip_opts $_ip_conf &&\
! grep -q "ip=[^[:space:]]*$_netdev" /proc/cmdline; then
echo "$_ip_opts" >> $_ip_conf
fi
if kdump_is_bridge "$_netdev"; then
kdump_setup_bridge "$_netdev"
elif kdump_is_bond "$_netdev"; then
kdump_setup_bond "$_netdev"
elif kdump_is_team "$_netdev"; then
kdump_setup_team "$_netdev"
elif kdump_is_vlan "$_netdev"; then
kdump_setup_vlan "$_netdev"
else
_ifname_opts=" ifname=$(kdump_setup_ifname $_netdev):$_netmac"
echo "$_ifname_opts" >> $_ip_conf
fi
kdump_setup_dns "$_netdev"
}
get_ip_route_field()
{
if `echo $1 | grep -q $2`; then
echo ${1##*$2} | cut -d ' ' -f1
fi
}
#Function:kdump_install_net
#$1: config values of net line in kdump.conf
#$2: srcaddr of network device
kdump_install_net() {
local _server _netdev _srcaddr _route _serv_tmp
local config_val="$1"
_server=$(get_remote_host $config_val)
if is_hostname $_server; then
_serv_tmp=`getent ahosts $_server | grep -v : | head -n 1`
if [ -z "$_serv_tmp" ]; then
_serv_tmp=`getent ahosts $_server | head -n 1`
fi
_server=`echo $_serv_tmp | cut -d' ' -f1`
fi
_route=`/sbin/ip -o route get to $_server 2>&1`
[ $? != 0 ] && echo "Bad kdump location: $config_val" && exit 1
#the field in the ip output changes if we go to another subnet
_srcaddr=$(get_ip_route_field "$_route" "src")
_netdev=$(get_ip_route_field "$_route" "dev")
kdump_setup_netdev "${_netdev}" "${_srcaddr}"
#save netdev used for kdump as cmdline
# Whoever calling kdump_install_net() is setting up the default gateway,
# ie. bootdev/kdumpnic. So don't override the setting if calling
# kdump_install_net() for another time. For example, after setting eth0 as
# the default gate way for network dump, eth1 in the fence kdump path will
# call kdump_install_net again and we don't want eth1 to be the default
# gateway.
if [ ! -f ${initdir}/etc/cmdline.d/60kdumpnic.conf ] &&
[ ! -f ${initdir}/etc/cmdline.d/70bootdev.conf ]; then
echo "kdumpnic=$(kdump_setup_ifname $_netdev)" > ${initdir}/etc/cmdline.d/60kdumpnic.conf
echo "bootdev=$(kdump_setup_ifname $_netdev)" > ${initdir}/etc/cmdline.d/70bootdev.conf
fi
}
default_dump_target_install_conf()
{
local _target _fstype
local _mntpoint _save_path
is_user_configured_dump_target && return
_save_path=$(get_option_value "path")
[ -z "$_save_path" ] && _save_path=$DEFAULT_PATH
# strip the duplicated "/"
_save_path=$(echo $_save_path | tr -s /)
_mntpoint=$(get_mntpoint_from_path $_save_path)
_target=$(get_target_from_path $_save_path)
if is_atomic && is_bind_mount $_mntpoint; then
_save_path=${_save_path##"$_mntpoint"}
# the real dump path in the 2nd kernel, if the mount point is bind mounted.
_save_path=$(get_bind_mount_directory $_mntpoint)/$_save_path
_mntpoint=$(get_mntpoint_from_target $_target)
# the absolute path in the 1st kernel
_save_path=$_mntpoint/$_save_path
fi
_fstype=$(get_fs_type_from_target $_target)
if is_fs_type_nfs $_fstype; then
kdump_install_net "$_target"
_fstype="nfs"
else
_target=$(kdump_get_persistent_dev $_target)
fi
echo "$_fstype $_target" >> ${initdir}/tmp/$$-kdump.conf
# strip the duplicated "/"
_save_path=$(echo $_save_path | tr -s /)
# don't touch the path under root mount
if [ "$_mntpoint" != "/" ]; then
_save_path=${_save_path##"$_mntpoint"}
fi
#erase the old path line, then insert the parsed path
sed -i "/^path/d" ${initdir}/tmp/$$-kdump.conf
echo "path $_save_path" >> ${initdir}/tmp/$$-kdump.conf
}
adjust_bind_mount_path()
{
local _target=$1
local _save_path=$(get_option_value "path")
[ -z "$_save_path" ] && _save_path=$DEFAULT_PATH
# strip the duplicated "/"
_save_path=$(echo $_save_path | tr -s /)
local _absolute_save_path=$(get_mntpoint_from_target $_target)/$_save_path
_absolute_save_path=$(echo "$_absolute_save_path" | tr -s /)
local _mntpoint=$(get_mntpoint_from_path $_absolute_save_path)
if is_bind_mount $_mntpoint; then
_save_path=${_absolute_save_path##"$_mntpoint"}
# the real dump path in the 2nd kernel, if the mount point is bind mounted.
_save_path=$(get_bind_mount_directory $_mntpoint)/$_save_path
#erase the old path line, then insert the parsed path
sed -i "/^path/d" ${initdir}/tmp/$$-kdump.conf
echo "path $_save_path" >> ${initdir}/tmp/$$-kdump.conf
fi
}
#install kdump.conf and what user specifies in kdump.conf
kdump_install_conf() {
local _opt _val _pdev
sed -ne '/^#/!p' /etc/kdump.conf > ${initdir}/tmp/$$-kdump.conf
while read _opt _val;
do
# remove inline comments after the end of a directive.
_val=$(strip_comments $_val)
case "$_opt" in
raw)
_pdev=$(persistent_policy="by-id" kdump_get_persistent_dev $_val)
sed -i -e "s#^$_opt[[:space:]]\+$_val#$_opt $_pdev#" ${initdir}/tmp/$$-kdump.conf
;;
ext[234]|xfs|btrfs|minix)
_pdev=$(kdump_get_persistent_dev $_val)
sed -i -e "s#^$_opt[[:space:]]\+$_val#$_opt $_pdev#" ${initdir}/tmp/$$-kdump.conf
if is_atomic; then
adjust_bind_mount_path "$_val"
fi
;;
ssh|nfs)
kdump_install_net "$_val"
;;
dracut_args)
if [[ $(get_dracut_args_fstype "$_val") = nfs* ]] ; then
kdump_install_net "$(get_dracut_args_target "$_val")"
fi
;;
kdump_pre|kdump_post|extra_bins)
dracut_install $_val
;;
core_collector)
dracut_install "${_val%%[[:blank:]]*}"
;;
esac
done < /etc/kdump.conf
default_dump_target_install_conf
kdump_configure_fence_kdump "${initdir}/tmp/$$-kdump.conf"
inst "${initdir}/tmp/$$-kdump.conf" "/etc/kdump.conf"
rm -f ${initdir}/tmp/$$-kdump.conf
}
# Default sysctl parameters should suffice for kdump kernel.
# Remove custom configurations sysctl.conf & sysctl.d/*
remove_sysctl_conf() {
# As custom configurations like vm.min_free_kbytes can lead
# to OOM issues in kdump kernel, avoid them
rm -f "${initdir}/etc/sysctl.conf"
rm -rf "${initdir}/etc/sysctl.d"
rm -rf "${initdir}/run/sysctl.d"
rm -rf "${initdir}/usr/lib/sysctl.d"
}
kdump_iscsi_get_rec_val() {
local result
# The open-iscsi 742 release changed to using flat files in
# /var/lib/iscsi.
result=$(/sbin/iscsiadm --show -m session -r ${1} | grep "^${2} = ")
result=${result##* = }
echo $result
}
kdump_get_iscsi_initiator() {
local _initiator
local initiator_conf="/etc/iscsi/initiatorname.iscsi"
[ -f "$initiator_conf" ] || return 1
while read _initiator; do
[ -z "${_initiator%%#*}" ] && continue # Skip comment lines
case $_initiator in
InitiatorName=*)
initiator=${_initiator#InitiatorName=}
echo "rd.iscsi.initiator=${initiator}"
return 0;;
*) ;;
esac
done < ${initiator_conf}
return 1
}
# Figure out iBFT session according to session type
is_ibft() {
[ "$(kdump_iscsi_get_rec_val $1 "node.discovery_type")" = fw ]
}
kdump_setup_iscsi_device() {
local path=$1
local tgt_name; local tgt_ipaddr;
local username; local password; local userpwd_str;
local username_in; local password_in; local userpwd_in_str;
local netdev
local srcaddr
local idev
local netroot_str ; local initiator_str;
local netroot_conf="${initdir}/etc/cmdline.d/50iscsi.conf"
local initiator_conf="/etc/iscsi/initiatorname.iscsi"
dinfo "Found iscsi component $1"
# Check once before getting explicit values, so we can bail out early,
# e.g. in case of pure-hardware(all-offload) iscsi.
if ! /sbin/iscsiadm -m session -r ${path} &>/dev/null ; then
return 1
fi
if is_ibft ${path}; then
return
fi
# Remove software iscsi cmdline generated by 95iscsi,
# and let kdump regenerate here.
rm -f ${initdir}/etc/cmdline.d/95iscsi.conf
tgt_name=$(kdump_iscsi_get_rec_val ${path} "node.name")
tgt_ipaddr=$(kdump_iscsi_get_rec_val ${path} "node.conn\[0\].address")
# get and set username and password details
username=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.username")
[ "$username" == "<empty>" ] && username=""
password=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.password")
[ "$password" == "<empty>" ] && password=""
username_in=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.username_in")
[ -n "$username" ] && userpwd_str="$username:$password"
# get and set incoming username and password details
[ "$username_in" == "<empty>" ] && username_in=""
password_in=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.password_in")
[ "$password_in" == "<empty>" ] && password_in=""
[ -n "$username_in" ] && userpwd_in_str=":$username_in:$password_in"
netdev=$(/sbin/ip route get to ${tgt_ipaddr} | \
sed 's|.*dev \(.*\).*|\1|g')
srcaddr=$(echo $netdev | awk '{ print $3; exit }')
netdev=$(echo $netdev | awk '{ print $1; exit }')
kdump_setup_netdev $netdev $srcaddr
# prepare netroot= command line
# FIXME: Do we need to parse and set other parameters like protocol, port
# iscsi_iface_name, netdev_name, LUN etc.
if is_ipv6_address $tgt_ipaddr; then
tgt_ipaddr="[$tgt_ipaddr]"
fi
netroot_str="netroot=iscsi:${userpwd_str}${userpwd_in_str}@$tgt_ipaddr::::$tgt_name"
[[ -f $netroot_conf ]] || touch $netroot_conf
# If netroot target does not exist already, append.
if ! grep -q $netroot_str $netroot_conf; then
echo $netroot_str >> $netroot_conf
dinfo "Appended $netroot_str to $netroot_conf"
fi
# Setup initator
initiator_str=$(kdump_get_iscsi_initiator)
[ $? -ne "0" ] && derror "Failed to get initiator name" && return 1
# If initiator details do not exist already, append.
if ! grep -q "$initiator_str" $netroot_conf; then
echo "$initiator_str" >> $netroot_conf
dinfo "Appended "$initiator_str" to $netroot_conf"
fi
}
kdump_check_iscsi_targets () {
# If our prerequisites are not met, fail anyways.
type -P iscsistart >/dev/null || return 1
kdump_check_setup_iscsi() (
local _dev
_dev=$1
[[ -L /sys/dev/block/$_dev ]] || return
cd "$(readlink -f /sys/dev/block/$_dev)"
until [[ -d sys || -d iscsi_session ]]; do
cd ..
done
[[ -d iscsi_session ]] && kdump_setup_iscsi_device "$PWD"
)
[[ $hostonly ]] || [[ $mount_needs ]] && {
for_each_host_dev_and_slaves_all kdump_check_setup_iscsi
}
}
# retrieves fence_kdump nodes from Pacemaker cluster configuration
get_pcs_fence_kdump_nodes() {
local nodes
# get cluster nodes from cluster cib, get interface and ip address
nodelist=`pcs cluster cib | xmllint --xpath "/cib/status/node_state/@uname" -`
# nodelist is formed as 'uname="node1" uname="node2" ... uname="nodeX"'
# we need to convert each to node1, node2 ... nodeX in each iteration
for node in ${nodelist}; do
# convert $node from 'uname="nodeX"' to 'nodeX'
eval $node
nodename=$uname
# Skip its own node name
if [ "$nodename" = `hostname` -o "$nodename" = `hostname -s` ]; then
continue
fi
nodes="$nodes $nodename"
done
echo $nodes
}
# retrieves fence_kdump args from config file
get_pcs_fence_kdump_args() {
if [ -f $FENCE_KDUMP_CONFIG_FILE ]; then
. $FENCE_KDUMP_CONFIG_FILE
echo $FENCE_KDUMP_OPTS
fi
}
# setup fence_kdump in cluster
# setup proper network and install needed files
kdump_configure_fence_kdump () {
local kdump_cfg_file=$1
local nodes
local args
if is_generic_fence_kdump; then
nodes=$(get_option_value "fence_kdump_nodes")
elif is_pcs_fence_kdump; then
nodes=$(get_pcs_fence_kdump_nodes)
# set appropriate options in kdump.conf
echo "fence_kdump_nodes $nodes" >> ${kdump_cfg_file}
args=$(get_pcs_fence_kdump_args)
if [ -n "$args" ]; then
echo "fence_kdump_args $args" >> ${kdump_cfg_file}
fi
else
# fence_kdump not configured
return 1
fi
# setup network for each node
for node in ${nodes}; do
kdump_install_net $node
done
dracut_install /etc/hosts
dracut_install /etc/nsswitch.conf
dracut_install $FENCE_KDUMP_SEND
}
# Install a random seed used to feed /dev/urandom
# By the time kdump service starts, /dev/uramdom is already fed by systemd
kdump_install_random_seed() {
local poolsize=`cat /proc/sys/kernel/random/poolsize`
if [ ! -d ${initdir}/var/lib/ ]; then
mkdir -p ${initdir}/var/lib/
fi
dd if=/dev/urandom of=${initdir}/var/lib/random-seed \
bs=$poolsize count=1 2> /dev/null
}
install() {
kdump_install_conf
remove_sysctl_conf
if is_ssh_dump_target; then
kdump_install_random_seed
fi
dracut_install -o /etc/adjtime /etc/localtime
inst "$moddir/monitor_dd_progress" "/kdumpscripts/monitor_dd_progress"
chmod +x ${initdir}/kdumpscripts/monitor_dd_progress
inst "/bin/dd" "/bin/dd"
inst "/bin/tail" "/bin/tail"
inst "/bin/date" "/bin/date"
inst "/bin/sync" "/bin/sync"
inst "/bin/cut" "/bin/cut"
inst "/bin/head" "/bin/head"
inst "/sbin/makedumpfile" "/sbin/makedumpfile"
inst "/sbin/vmcore-dmesg" "/sbin/vmcore-dmesg"
inst "/lib/kdump/kdump-lib.sh" "/lib/kdump-lib.sh"
inst "/lib/kdump/kdump-lib-initramfs.sh" "/lib/kdump-lib-initramfs.sh"
inst "$moddir/kdump.sh" "/usr/bin/kdump.sh"
inst "$moddir/kdump-capture.service" "$systemdsystemunitdir/kdump-capture.service"
ln_r "$systemdsystemunitdir/kdump-capture.service" "$systemdsystemunitdir/initrd.target.wants/kdump-capture.service"
inst "$moddir/kdump-error-handler.sh" "/usr/bin/kdump-error-handler.sh"
inst "$moddir/kdump-error-handler.service" "$systemdsystemunitdir/kdump-error-handler.service"
# Replace existing emergency service and emergency target
cp "$moddir/kdump-emergency.service" "$initdir/$systemdsystemunitdir/emergency.service"
cp "$moddir/kdump-emergency.target" "$initdir/$systemdsystemunitdir/emergency.target"
# Also redirect dracut-emergency to kdump error handler
ln_r "$systemdsystemunitdir/emergency.service" "$systemdsystemunitdir/dracut-emergency.service"
# Check for all the devices and if any device is iscsi, bring up iscsi
# target. Ideally all this should be pushed into dracut iscsi module
# at some point of time.
kdump_check_iscsi_targets
# For the lvm type target under kdump, in /etc/lvm/lvm.conf we can
# safely replace "reserved_memory=XXXX"(default value is 8192) with
# "reserved_memory=1024" to lower memory pressure under kdump. We do
# it unconditionally here, if "/etc/lvm/lvm.conf" doesn't exist, it
# actually does nothing.
sed -i -e \
's/\(^[[:space:]]*reserved_memory[[:space:]]*=\)[[:space:]]*[[:digit:]]*/\1 1024/' \
${initdir}/etc/lvm/lvm.conf &>/dev/null
# Kdump turns out to require longer default systemd mount timeout
# than 1st kernel(90s by default), we use default 300s for kdump.
grep -r "^[[:space:]]*DefaultTimeoutStartSec=" ${initdir}/etc/systemd/system.conf* &>/dev/null
if [ $? -ne 0 ]; then
mkdir -p ${initdir}/etc/systemd/system.conf.d
echo "[Manager]" > ${initdir}/etc/systemd/system.conf.d/kdump.conf
echo "DefaultTimeoutStartSec=300s" >> ${initdir}/etc/systemd/system.conf.d/kdump.conf
fi
}