b5577c163a
/usr/lib/udev/ccw_init [1] shipped by s390utils extracts the values of
SUBCHANNELS, NETTYPE and LAYER2 from /etc/sysconfig/network-scripts/ifcfg-*
or /etc/NetworkManager/system-connections/*.nmconnection to activate znet
network device. If the connection profile is copied to initrd,
there is no need to set up the "rd.znet" dracut cmdline parameter.
There are two cases addressed by this commit,
1. znet network interface is a slave of bonding/teaming/vlan/bridging
network. The connection profile has been copied to initrd by
kdump_copy_nmconnection_file and it contains the info needed by
ccw_init.
2. znet network interface is a slave of bonding/teaming/vlan/bridging
network. The corresponding ifcfg-*/*.nmconnection file may not contain
info like SUBCHANNELS [2]. In this case, copy the ifcfg-*/*.nmconnection
file that has this info to the kdump initrd. Also to prevent the copied
connection profile from being chosen by NM, set
connection.autoconnect=false for this connection profile.
With this implementation, there is also no need to check if znet is
used beforehand.
Note
1. ccw_init doesn't care if SUBCHANNELS, NETTYPE and LAYER2 comes from
an active NM profile or not. If an inactive NM profile contains this
info, it needs to be copied to the kdump initrd as well.
2. "rd.znet_ifname=$_netdev:${SUBCHANNELS}" is no longer needed needed
because now there is no renaming of s390x network interfaces when
reusing NetworkManager profiles. rd.znet_ifname was introduced in
commit ce0305d ("Add a new option 'rd.znet_ifname' in order to use it
in udev rules") to address the special case of non-persistent
MAC address by renaming a network interface by SUBCHANNELS.
[1] https://src.fedoraproject.org/rpms/s390utils/blob/rawhide/f/ccw_init
[2] https://bugzilla.redhat.com/show_bug.cgi?id=2064708
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Thomas Haller <thaller@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
1065 lines
32 KiB
Bash
Executable File
1065 lines
32 KiB
Bash
Executable File
#!/bin/bash
|
|
|
|
_DRACUT_KDUMP_NM_TMP_DIR="/tmp/$$-DRACUT_KDUMP_NM"
|
|
|
|
_save_kdump_netifs() {
|
|
unique_netifs[$1]=1
|
|
}
|
|
|
|
_get_kdump_netifs() {
|
|
echo -n "${!unique_netifs[@]}"
|
|
}
|
|
|
|
cleanup() {
|
|
rm -rf "$_DRACUT_KDUMP_NM_TMP_DIR"
|
|
}
|
|
|
|
# shellcheck disable=SC2154 # known issue of shellcheck https://github.com/koalaman/shellcheck/issues/1299
|
|
trap 'ret=$?; cleanup; exit $ret;' EXIT
|
|
|
|
kdump_module_init() {
|
|
if ! [[ -d "${initdir}/tmp" ]]; then
|
|
mkdir -p "${initdir}/tmp"
|
|
fi
|
|
|
|
mkdir -p "$_DRACUT_KDUMP_NM_TMP_DIR"
|
|
|
|
. /lib/kdump/kdump-lib.sh
|
|
}
|
|
|
|
check() {
|
|
[[ $debug ]] && set -x
|
|
#kdumpctl sets this explicitly
|
|
if [[ -z $IN_KDUMP ]] || [[ ! -f /etc/kdump.conf ]]; then
|
|
return 1
|
|
fi
|
|
return 0
|
|
}
|
|
|
|
depends() {
|
|
local _dep="base shutdown"
|
|
|
|
kdump_module_init
|
|
|
|
add_opt_module() {
|
|
[[ " $omit_dracutmodules " != *\ $1\ * ]] && _dep="$_dep $1"
|
|
}
|
|
|
|
if is_squash_available; then
|
|
add_opt_module squash
|
|
else
|
|
dwarning "Required modules to build a squashed kdump image is missing!"
|
|
fi
|
|
|
|
if is_wdt_active; then
|
|
add_opt_module watchdog
|
|
fi
|
|
|
|
if is_ssh_dump_target; then
|
|
_dep="$_dep ssh-client"
|
|
fi
|
|
|
|
if is_lvm2_thinp_dump_target; then
|
|
if dracut --list-modules | grep -q lvmthinpool-monitor; then
|
|
add_opt_module lvmthinpool-monitor
|
|
else
|
|
dwarning "Required lvmthinpool-monitor modules is missing! Please upgrade dracut >= 057."
|
|
fi
|
|
fi
|
|
|
|
if [[ "$(uname -m)" == "s390x" ]]; then
|
|
_dep="$_dep znet"
|
|
fi
|
|
|
|
if [[ -n "$(ls -A /sys/class/drm 2> /dev/null)" ]] || [[ -d /sys/module/hyperv_fb ]]; then
|
|
add_opt_module drm
|
|
fi
|
|
|
|
if is_generic_fence_kdump || is_pcs_fence_kdump; then
|
|
_dep="$_dep network"
|
|
fi
|
|
|
|
echo "$_dep"
|
|
}
|
|
|
|
kdump_is_bridge() {
|
|
[[ -d /sys/class/net/"$1"/bridge ]]
|
|
}
|
|
|
|
kdump_is_bond() {
|
|
[[ -d /sys/class/net/"$1"/bonding ]]
|
|
}
|
|
|
|
kdump_is_team() {
|
|
[[ -f /usr/bin/teamnl ]] && teamnl "$1" ports &> /dev/null
|
|
}
|
|
|
|
kdump_is_vlan() {
|
|
[[ -f /proc/net/vlan/"$1" ]]
|
|
}
|
|
|
|
# $1: netdev name
|
|
source_ifcfg_file() {
|
|
local ifcfg_file
|
|
|
|
dwarning "Network Scripts are deprecated. You are encouraged to set up network by NetworkManager."
|
|
ifcfg_file=$(get_ifcfg_filename "$1")
|
|
if [[ -f ${ifcfg_file} ]]; then
|
|
. "${ifcfg_file}"
|
|
else
|
|
dwarning "The ifcfg file of $1 is not found!"
|
|
fi
|
|
}
|
|
|
|
# $1: repeat times
|
|
# $2: string to be repeated
|
|
# $3: separator
|
|
repeatedly_join_str() {
|
|
local _count="$1"
|
|
local _str="$2"
|
|
local _separator="$3"
|
|
local i _res
|
|
|
|
if [[ $_count -le 0 ]]; then
|
|
echo -n ""
|
|
return
|
|
fi
|
|
|
|
i=0
|
|
_res="$_str"
|
|
((_count--))
|
|
|
|
while [[ $i -lt $_count ]]; do
|
|
((i++))
|
|
_res="${_res}${_separator}${_str}"
|
|
done
|
|
echo -n "$_res"
|
|
}
|
|
|
|
# $1: prefix
|
|
# $2: ipv6_flag="-6" indicates it's IPv6
|
|
# Given a prefix, calculate the netmask (equivalent of "ipcalc -m")
|
|
# by concatenating three parts,
|
|
# 1) the groups with all bits set 1
|
|
# 2) a group with partial bits set to 0
|
|
# 3) the groups with all bits set to 0
|
|
cal_netmask_by_prefix() {
|
|
local _prefix="$1"
|
|
local _ipv6_flag="$2" _ipv6
|
|
local _bits_per_octet=8
|
|
local _count _res _octets_per_group _octets_total _seperator _total_groups
|
|
local _max_group_value _max_group_value_repr _bits_per_group _tmp _zero_bits
|
|
|
|
if [[ $_ipv6_flag == "-6" ]]; then
|
|
_ipv6=1
|
|
else
|
|
_ipv6=0
|
|
fi
|
|
|
|
if [[ $_prefix -lt 0 || $_prefix -gt 128 ]] \
|
|
|| ( ((!_ipv6)) && [[ $_prefix -gt 32 ]]); then
|
|
derror "Bad prefix:$_prefix for calculating netmask"
|
|
exit 1
|
|
fi
|
|
|
|
if ((_ipv6)); then
|
|
_octets_per_group=2
|
|
_octets_total=16
|
|
_seperator=":"
|
|
else
|
|
_octets_per_group=1
|
|
_octets_total=4
|
|
_seperator="."
|
|
fi
|
|
|
|
_total_groups=$((_octets_total / _octets_per_group))
|
|
_bits_per_group=$((_octets_per_group * _bits_per_octet))
|
|
_max_group_value=$(((1 << _bits_per_group) - 1))
|
|
|
|
if ((_ipv6)); then
|
|
_max_group_value_repr=$(printf "%x" $_max_group_value)
|
|
else
|
|
_max_group_value_repr="$_max_group_value"
|
|
fi
|
|
|
|
_count=$((_prefix / _octets_per_group / _bits_per_octet))
|
|
_first_part=$(repeatedly_join_str "$_count" "$_max_group_value_repr" "$_seperator")
|
|
_res="$_first_part"
|
|
|
|
_tmp=$((_octets_total * _bits_per_octet - _prefix))
|
|
_zero_bits=$((_tmp % _bits_per_group))
|
|
if [[ $_zero_bits -ne 0 ]]; then
|
|
_second_part=$((_max_group_value >> _zero_bits << _zero_bits))
|
|
if ((_ipv6)); then
|
|
_second_part=$(printf "%x" $_second_part)
|
|
fi
|
|
((_count++))
|
|
if [[ -z $_first_part ]]; then
|
|
_res="$_second_part"
|
|
else
|
|
_res="${_first_part}${_seperator}${_second_part}"
|
|
fi
|
|
fi
|
|
|
|
_count=$((_total_groups - _count))
|
|
if [[ $_count -eq 0 ]]; then
|
|
echo -n "$_res"
|
|
return
|
|
fi
|
|
|
|
if ((_ipv6)) && [[ $_count -gt 1 ]]; then
|
|
# use condensed notion for IPv6
|
|
_third_part=":"
|
|
else
|
|
_third_part=$(repeatedly_join_str "$_count" "0" "$_seperator")
|
|
fi
|
|
|
|
if [[ -z $_res ]] && ((!_ipv6)); then
|
|
echo -n "${_third_part}"
|
|
else
|
|
echo -n "${_res}${_seperator}${_third_part}"
|
|
fi
|
|
}
|
|
|
|
kdump_get_mac_addr() {
|
|
cat "/sys/class/net/$1/address"
|
|
}
|
|
|
|
#Bonding or team master modifies the mac address
|
|
#of its slaves, we should use perm address
|
|
kdump_get_perm_addr() {
|
|
local addr
|
|
addr=$(ethtool -P "$1" | sed -e 's/Permanent address: //')
|
|
if [[ -z $addr ]] || [[ $addr == "00:00:00:00:00:00" ]]; then
|
|
derror "Can't get the permanent address of $1"
|
|
else
|
|
echo "$addr"
|
|
fi
|
|
}
|
|
|
|
apply_nm_initrd_generator_timeouts() {
|
|
local _timeout_conf
|
|
|
|
_timeout_conf=$_DRACUT_KDUMP_NM_TMP_DIR/timeout_conf
|
|
cat << EOF > "$_timeout_conf"
|
|
[device-95-kdump]
|
|
carrier-wait-timeout=30000
|
|
|
|
[connection-95-kdump]
|
|
ipv4.dhcp-timeout=90
|
|
ipv6.dhcp-timeout=90
|
|
EOF
|
|
|
|
inst "$_timeout_conf" "/etc/NetworkManager/conf.d/95-kdump-timeouts.conf"
|
|
}
|
|
|
|
use_ipv4_or_ipv6() {
|
|
local _netif=$1 _uuid=$2
|
|
|
|
if [[ -v "ipv4_usage[$_netif]" ]]; then
|
|
nmcli connection modify --temporary "$_uuid" ipv4.may-fail no &> >(ddebug)
|
|
fi
|
|
|
|
if [[ -v "ipv6_usage[$_netif]" ]]; then
|
|
nmcli connection modify --temporary "$_uuid" ipv6.may-fail no &> >(ddebug)
|
|
fi
|
|
|
|
if [[ -v "ipv4_usage[$_netif]" ]] && [[ ! -v "ipv6_usage[$_netif]" ]]; then
|
|
nmcli connection modify --temporary "$_uuid" ipv6.method disabled &> >(ddebug)
|
|
elif [[ ! -v "ipv4_usage[$_netif]" ]] && [[ -v "ipv6_usage[$_netif]" ]]; then
|
|
nmcli connection modify --temporary "$_uuid" ipv4.method disabled &> >(ddebug)
|
|
fi
|
|
}
|
|
|
|
_clone_nmconnection() {
|
|
local _clone_output _name _unique_id
|
|
|
|
_unique_id=$1
|
|
_name=$(nmcli --get-values connection.id connection show "$_unique_id")
|
|
if _clone_output=$(nmcli connection clone --temporary uuid "$_unique_id" "$_name"); then
|
|
sed -E -n "s/.* \(.*\) cloned as.*\((.*)\)\.$/\1/p" <<< "$_clone_output"
|
|
return 0
|
|
fi
|
|
|
|
return 1
|
|
}
|
|
|
|
_match_nmconnection_by_mac() {
|
|
local _unique_id _dev _mac _mac_field
|
|
|
|
_unique_id=$1
|
|
_dev=$2
|
|
|
|
_mac=$(kdump_get_perm_addr "$_dev")
|
|
[[ $_mac != 'not set' ]] || return
|
|
_mac_field=$(nmcli --get-values connection.type connection show "$_unique_id").mac-address
|
|
nmcli connection modify --temporary "$_unique_id" "$_mac_field" "$_mac" &> >(ddebug)
|
|
nmcli connection modify --temporary "$_unique_id" "connection.interface-name" "" &> >(ddebug)
|
|
}
|
|
|
|
# Clone and modify NM connection profiles
|
|
#
|
|
# This function makes use of "nmcli clone" to automatically convert ifcfg-*
|
|
# files to Networkmanager .nmconnection connection profiles and also modify the
|
|
# properties of .nmconnection if necessary.
|
|
clone_and_modify_nmconnection() {
|
|
local _dev _cloned_nmconnection_file_path _tmp_nmconnection_file_path _old_uuid _uuid
|
|
|
|
_dev=$1
|
|
_nmconnection_file_path=$2
|
|
|
|
_old_uuid=$(nmcli --get-values connection.uuid connection show filename "$_nmconnection_file_path")
|
|
|
|
if ! _uuid=$(_clone_nmconnection "$_old_uuid"); then
|
|
derror "Failed to clone $_old_uuid"
|
|
exit 1
|
|
fi
|
|
|
|
use_ipv4_or_ipv6 "$_dev" "$_uuid"
|
|
|
|
nmcli connection modify --temporary uuid "$_uuid" connection.wait-device-timeout 60000 &> >(ddebug)
|
|
# For physical NIC i.e. non-user created NIC, ask NM to match a
|
|
# connection profile based on MAC address
|
|
_match_nmconnection_by_mac "$_uuid" "$_dev"
|
|
|
|
_cloned_nmconnection_file_path=$(nmcli --get-values UUID,FILENAME connection show | sed -n "s/^${_uuid}://p")
|
|
_tmp_nmconnection_file_path=$_DRACUT_KDUMP_NM_TMP_DIR/$(basename "$_nmconnection_file_path")
|
|
cp "$_cloned_nmconnection_file_path" "$_tmp_nmconnection_file_path"
|
|
# change uuid back to old value in case it's refered by other connection
|
|
# profile e.g. connection.master could be interface name of the master
|
|
# device or UUID of the master connection.
|
|
sed -i -E "s/(^uuid=).*$/\1${_old_uuid}/g" "$_tmp_nmconnection_file_path"
|
|
nmcli connection del "$_uuid" &> >(ddebug)
|
|
echo -n "$_tmp_nmconnection_file_path"
|
|
}
|
|
|
|
_install_nmconnection() {
|
|
local _src _nmconnection_name _dst
|
|
|
|
_src=$1
|
|
_nmconnection_name=$(basename "$_src")
|
|
_dst="/etc/NetworkManager/system-connections/$_nmconnection_name"
|
|
inst "$_src" "$_dst"
|
|
}
|
|
|
|
kdump_install_nmconnections() {
|
|
local _netif _nm_conn_path _cloned_nm_path
|
|
|
|
while IFS=: read -r _netif _nm_conn_path; do
|
|
[[ -v "unique_netifs[$_netif]" ]] || continue
|
|
if _cloned_nm_path=$(clone_and_modify_nmconnection "$_netif" "$_nm_conn_path"); then
|
|
_install_nmconnection "$_cloned_nm_path"
|
|
else
|
|
derror "Failed to install the .nmconnection for $_netif"
|
|
exit 1
|
|
fi
|
|
done <<< "$(nmcli -t -f device,filename connection show --active)"
|
|
|
|
# Stop dracut 35network-manger to calling nm-initrd-generator.
|
|
# Note this line of code can be removed after NetworkManager >= 1.35.2
|
|
# gets released.
|
|
echo > "${initdir}/usr/libexec/nm-initrd-generator"
|
|
}
|
|
|
|
kdump_install_nm_netif_allowlist() {
|
|
local _netif _except_netif _netif_allowlist _netif_allowlist_nm_conf
|
|
|
|
for _netif in $1; do
|
|
_per_mac=$(kdump_get_perm_addr "$_netif")
|
|
if [[ "$_per_mac" != 'not set' ]]; then
|
|
_except_netif="mac:$_per_mac"
|
|
else
|
|
_except_netif="interface-name:$_netif"
|
|
fi
|
|
_netif_allowlist="${_netif_allowlist}except:${_except_netif};"
|
|
done
|
|
|
|
_netif_allowlist_nm_conf=$_DRACUT_KDUMP_NM_TMP_DIR/netif_allowlist_nm_conf
|
|
cat << EOF > "$_netif_allowlist_nm_conf"
|
|
[device-others]
|
|
match-device=${_netif_allowlist}
|
|
managed=false
|
|
EOF
|
|
|
|
inst "$_netif_allowlist_nm_conf" "/etc/NetworkManager/conf.d/10-kdump-netif_allowlist.conf"
|
|
}
|
|
|
|
_get_nic_driver() {
|
|
ethtool -i "$1" | sed -n -E "s/driver: (.*)/\1/p"
|
|
}
|
|
|
|
kdump_install_nic_driver() {
|
|
local _netif _driver _drivers
|
|
|
|
_drivers=()
|
|
|
|
for _netif in $1; do
|
|
_driver=$(_get_nic_driver "$_netif")
|
|
if [[ -z $_driver ]]; then
|
|
derror "Failed to get the driver of $_netif"
|
|
exit 1
|
|
fi
|
|
|
|
if [[ $_driver == "802.1Q VLAN Support" ]]; then
|
|
# ethtool somehow doesn't return the driver name for a VLAN NIC
|
|
_driver=8021q
|
|
elif [[ $_driver == "team" ]]; then
|
|
# install the team mode drivers like team_mode_roundrobin.ko as well
|
|
_driver='=drivers/net/team'
|
|
fi
|
|
|
|
_drivers+=("$_driver")
|
|
done
|
|
|
|
instmods "${_drivers[@]}"
|
|
}
|
|
|
|
kdump_setup_bridge() {
|
|
local _netdev=$1
|
|
local _dev
|
|
for _dev in "/sys/class/net/$_netdev/brif/"*; do
|
|
[[ -e $_dev ]] || continue
|
|
_dev=${_dev##*/}
|
|
if kdump_is_bond "$_dev"; then
|
|
kdump_setup_bond "$_dev" || return 1
|
|
elif kdump_is_team "$_dev"; then
|
|
kdump_setup_team "$_dev"
|
|
elif kdump_is_vlan "$_dev"; then
|
|
kdump_setup_vlan "$_dev"
|
|
fi
|
|
_save_kdump_netifs "$_dev"
|
|
done
|
|
}
|
|
|
|
kdump_setup_bond() {
|
|
local _netdev="$1"
|
|
local _dev
|
|
|
|
for _dev in $(< "/sys/class/net/$_netdev/bonding/slaves"); do
|
|
_save_kdump_netifs "$_dev"
|
|
done
|
|
}
|
|
|
|
kdump_setup_team() {
|
|
local _netdev=$1
|
|
local _dev
|
|
for _dev in $(teamnl "$_netdev" ports | awk -F':' '{print $2}'); do
|
|
_save_kdump_netifs "$_dev"
|
|
done
|
|
}
|
|
|
|
kdump_setup_vlan() {
|
|
local _netdev=$1
|
|
local _parent_netif
|
|
|
|
_parent_netif="$(awk '/^Device:/{print $2}' /proc/net/vlan/"$_netdev")"
|
|
|
|
#Just support vlan over bond and team
|
|
if kdump_is_bridge "$_parent_netif"; then
|
|
derror "Vlan over bridge is not supported!"
|
|
exit 1
|
|
elif kdump_is_bond "$_parent_netif"; then
|
|
kdump_setup_bond "$_parent_netif" || return 1
|
|
elif kdump_is_team "$_parent_netif"; then
|
|
kdump_setup_team "$_parent_netif" || return 1
|
|
fi
|
|
|
|
_save_kdump_netifs "$_parent_netif"
|
|
}
|
|
|
|
_find_znet_nmconnection() {
|
|
LANG=C grep -s -E -i -l \
|
|
"^s390-subchannels=([0-9]\.[0-9]\.[a-f0-9]+;){0,2}" \
|
|
"$1"/*.nmconnection | LC_ALL=C sed -e "$2"
|
|
}
|
|
|
|
# setup s390 znet
|
|
#
|
|
# Note part of code is extracted from ccw_init provided by s390utils
|
|
kdump_setup_znet() {
|
|
local _config_file _unique_name _NM_conf_dir
|
|
local __sed_discard_ignored_files='/\(~\|\.bak\|\.old\|\.orig\|\.rpmnew\|\.rpmorig\|\.rpmsave\)$/d'
|
|
|
|
if [[ "$(uname -m)" != "s390x" ]]; then
|
|
return
|
|
fi
|
|
|
|
_NM_conf_dir="/etc/NetworkManager/system-connections"
|
|
|
|
_config_file=$(_find_znet_nmconnection "$initdir/$_NM_conf_dir" "$__sed_discard_ignored_files")
|
|
if [[ -n "$_config_file" ]]; then
|
|
ddebug "$_config_file has already contained the znet config"
|
|
return
|
|
fi
|
|
|
|
_config_file=$(LANG=C grep -s -E -i -l \
|
|
"^[[:space:]]*SUBCHANNELS=['\"]?([0-9]\.[0-9]\.[a-f0-9]+,){0,2}" \
|
|
/etc/sysconfig/network-scripts/ifcfg-* \
|
|
| LC_ALL=C sed -e "$__sed_discard_ignored_files")
|
|
|
|
if [[ -z "$_config_file" ]]; then
|
|
_config_file=$(_find_znet_nmconnection "$_NM_conf_dir" "$__sed_discard_ignored_files")
|
|
fi
|
|
|
|
if [[ -n "$_config_file" ]]; then
|
|
_unique_name=$(cat /proc/sys/kernel/random/uuid)
|
|
nmcli connection clone --temporary "$_config_file" "$_unique_name" &> >(ddebug)
|
|
nmcli connection modify --temporary "$_unique_name" connection.autoconnect false
|
|
inst "/run/NetworkManager/system-connections/${_unique_name}.nmconnection" "${_NM_conf_dir}/${_unique_name}.nmconnection"
|
|
nmcli connection del "$_unique_name" &> >(ddebug)
|
|
fi
|
|
|
|
}
|
|
|
|
kdump_get_remote_ip() {
|
|
local _remote _remote_temp
|
|
_remote=$(get_remote_host "$1")
|
|
if is_hostname "$_remote"; then
|
|
_remote_temp=$(getent ahosts "$_remote" | grep -v : | head -n 1)
|
|
if [[ -z $_remote_temp ]]; then
|
|
_remote_temp=$(getent ahosts "$_remote" | head -n 1)
|
|
fi
|
|
_remote=$(echo "$_remote_temp" | awk '{print $1}')
|
|
fi
|
|
echo "$_remote"
|
|
}
|
|
|
|
# Collect netifs needed by kdump
|
|
# $1: destination host
|
|
kdump_collect_netif_usage() {
|
|
local _destaddr _srcaddr _route _netdev
|
|
|
|
_destaddr=$(kdump_get_remote_ip "$1")
|
|
_route=$(kdump_get_ip_route "$_destaddr")
|
|
_srcaddr=$(kdump_get_ip_route_field "$_route" "src")
|
|
_netdev=$(kdump_get_ip_route_field "$_route" "dev")
|
|
|
|
if kdump_is_bridge "$_netdev"; then
|
|
kdump_setup_bridge "$_netdev"
|
|
elif kdump_is_bond "$_netdev"; then
|
|
kdump_setup_bond "$_netdev" || return 1
|
|
elif kdump_is_team "$_netdev"; then
|
|
kdump_setup_team "$_netdev"
|
|
elif kdump_is_vlan "$_netdev"; then
|
|
kdump_setup_vlan "$_netdev"
|
|
fi
|
|
_save_kdump_netifs "$_netdev"
|
|
|
|
if [[ ! -f ${initdir}/etc/cmdline.d/50neednet.conf ]]; then
|
|
# network-manager module needs this parameter
|
|
echo "rd.neednet" >> "${initdir}/etc/cmdline.d/50neednet.conf"
|
|
fi
|
|
|
|
if [[ ! -f ${initdir}/etc/cmdline.d/60kdumpip.conf ]]; then
|
|
echo "kdump_remote_ip=$_destaddr" > "${initdir}/etc/cmdline.d/60kdumpip.conf"
|
|
fi
|
|
|
|
if is_ipv6_address "$_srcaddr"; then
|
|
ipv6_usage[$_netdev]=1
|
|
else
|
|
ipv4_usage[$_netdev]=1
|
|
fi
|
|
}
|
|
|
|
# Setup dracut to bring up network interface that enable
|
|
# initramfs accessing giving destination
|
|
kdump_install_net() {
|
|
local _netifs
|
|
|
|
_netifs=$(_get_kdump_netifs)
|
|
if [[ -n "$_netifs" ]]; then
|
|
kdump_install_nmconnections
|
|
apply_nm_initrd_generator_timeouts
|
|
kdump_setup_znet
|
|
kdump_install_nm_netif_allowlist "$_netifs"
|
|
kdump_install_nic_driver "$_netifs"
|
|
fi
|
|
}
|
|
|
|
# install etc/kdump/pre.d and /etc/kdump/post.d
|
|
kdump_install_pre_post_conf() {
|
|
if [[ -d /etc/kdump/pre.d ]]; then
|
|
for file in /etc/kdump/pre.d/*; do
|
|
if [[ -x $file ]]; then
|
|
dracut_install "$file"
|
|
elif [[ $file != "/etc/kdump/pre.d/*" ]]; then
|
|
echo "$file is not executable"
|
|
fi
|
|
done
|
|
fi
|
|
|
|
if [[ -d /etc/kdump/post.d ]]; then
|
|
for file in /etc/kdump/post.d/*; do
|
|
if [[ -x $file ]]; then
|
|
dracut_install "$file"
|
|
elif [[ $file != "/etc/kdump/post.d/*" ]]; then
|
|
echo "$file is not executable"
|
|
fi
|
|
done
|
|
fi
|
|
}
|
|
|
|
default_dump_target_install_conf() {
|
|
local _target _fstype
|
|
local _mntpoint _save_path
|
|
|
|
is_user_configured_dump_target && return
|
|
|
|
_save_path=$(get_bind_mount_source "$(get_save_path)")
|
|
_target=$(get_target_from_path "$_save_path")
|
|
_mntpoint=$(get_mntpoint_from_target "$_target")
|
|
|
|
_fstype=$(get_fs_type_from_target "$_target")
|
|
if is_fs_type_nfs "$_fstype"; then
|
|
kdump_collect_netif_usage "$_target"
|
|
_fstype="nfs"
|
|
else
|
|
_target=$(kdump_get_persistent_dev "$_target")
|
|
fi
|
|
|
|
echo "$_fstype $_target" >> "${initdir}/tmp/$$-kdump.conf"
|
|
|
|
# don't touch the path under root mount
|
|
if [[ $_mntpoint != "/" ]]; then
|
|
_save_path=${_save_path##"$_mntpoint"}
|
|
fi
|
|
|
|
#erase the old path line, then insert the parsed path
|
|
sed -i "/^path/d" "${initdir}/tmp/$$-kdump.conf"
|
|
echo "path $_save_path" >> "${initdir}/tmp/$$-kdump.conf"
|
|
}
|
|
|
|
#install kdump.conf and what user specifies in kdump.conf
|
|
kdump_install_conf() {
|
|
local _opt _val _pdev
|
|
|
|
kdump_read_conf > "${initdir}/tmp/$$-kdump.conf"
|
|
|
|
while read -r _opt _val; do
|
|
# remove inline comments after the end of a directive.
|
|
case "$_opt" in
|
|
raw)
|
|
_pdev=$(persistent_policy="by-id" kdump_get_persistent_dev "$_val")
|
|
sed -i -e "s#^${_opt}[[:space:]]\+$_val#$_opt $_pdev#" "${initdir}/tmp/$$-kdump.conf"
|
|
;;
|
|
ext[234] | xfs | btrfs | minix | virtiofs)
|
|
_pdev=$(kdump_get_persistent_dev "$_val")
|
|
sed -i -e "s#^${_opt}[[:space:]]\+$_val#$_opt $_pdev#" "${initdir}/tmp/$$-kdump.conf"
|
|
;;
|
|
ssh | nfs)
|
|
kdump_collect_netif_usage "$_val"
|
|
;;
|
|
dracut_args)
|
|
if [[ $(get_dracut_args_fstype "$_val") == nfs* ]]; then
|
|
kdump_collect_netif_usage "$(get_dracut_args_target "$_val")"
|
|
fi
|
|
;;
|
|
kdump_pre | kdump_post | extra_bins)
|
|
# shellcheck disable=SC2086
|
|
dracut_install $_val
|
|
;;
|
|
core_collector)
|
|
dracut_install "${_val%%[[:blank:]]*}"
|
|
;;
|
|
esac
|
|
done <<< "$(kdump_read_conf)"
|
|
|
|
kdump_install_pre_post_conf
|
|
|
|
default_dump_target_install_conf
|
|
|
|
kdump_configure_fence_kdump "${initdir}/tmp/$$-kdump.conf"
|
|
inst "${initdir}/tmp/$$-kdump.conf" "/etc/kdump.conf"
|
|
rm -f "${initdir}/tmp/$$-kdump.conf"
|
|
}
|
|
|
|
# Default sysctl parameters should suffice for kdump kernel.
|
|
# Remove custom configurations sysctl.conf & sysctl.d/*
|
|
remove_sysctl_conf() {
|
|
|
|
# As custom configurations like vm.min_free_kbytes can lead
|
|
# to OOM issues in kdump kernel, avoid them
|
|
rm -f "${initdir}/etc/sysctl.conf"
|
|
rm -rf "${initdir}/etc/sysctl.d"
|
|
rm -rf "${initdir}/run/sysctl.d"
|
|
rm -rf "${initdir}/usr/lib/sysctl.d"
|
|
}
|
|
|
|
kdump_iscsi_get_rec_val() {
|
|
|
|
local result
|
|
|
|
# The open-iscsi 742 release changed to using flat files in
|
|
# /var/lib/iscsi.
|
|
|
|
result=$(/sbin/iscsiadm --show -m session -r "$1" | grep "^${2} = ")
|
|
result=${result##* = }
|
|
echo "$result"
|
|
}
|
|
|
|
kdump_get_iscsi_initiator() {
|
|
local _initiator
|
|
local initiator_conf="/etc/iscsi/initiatorname.iscsi"
|
|
|
|
[[ -f $initiator_conf ]] || return 1
|
|
|
|
while read -r _initiator; do
|
|
[[ -z ${_initiator%%#*} ]] && continue # Skip comment lines
|
|
|
|
case $_initiator in
|
|
InitiatorName=*)
|
|
initiator=${_initiator#InitiatorName=}
|
|
echo "rd.iscsi.initiator=${initiator}"
|
|
return 0
|
|
;;
|
|
*) ;;
|
|
esac
|
|
done < ${initiator_conf}
|
|
|
|
return 1
|
|
}
|
|
|
|
# Figure out iBFT session according to session type
|
|
is_ibft() {
|
|
[[ "$(kdump_iscsi_get_rec_val "$1" "node.discovery_type")" == fw ]]
|
|
}
|
|
|
|
kdump_setup_iscsi_device() {
|
|
local path=$1
|
|
local tgt_name
|
|
local tgt_ipaddr
|
|
local username
|
|
local password
|
|
local userpwd_str
|
|
local username_in
|
|
local password_in
|
|
local userpwd_in_str
|
|
local netroot_str
|
|
local initiator_str
|
|
local netroot_conf="${initdir}/etc/cmdline.d/50iscsi.conf"
|
|
local initiator_conf="/etc/iscsi/initiatorname.iscsi"
|
|
|
|
dinfo "Found iscsi component $1"
|
|
|
|
# Check once before getting explicit values, so we can bail out early,
|
|
# e.g. in case of pure-hardware(all-offload) iscsi.
|
|
if ! /sbin/iscsiadm -m session -r "$path" &> /dev/null; then
|
|
return 1
|
|
fi
|
|
|
|
if is_ibft "$path"; then
|
|
return
|
|
fi
|
|
|
|
# Remove software iscsi cmdline generated by 95iscsi,
|
|
# and let kdump regenerate here.
|
|
rm -f "${initdir}/etc/cmdline.d/95iscsi.conf"
|
|
|
|
tgt_name=$(kdump_iscsi_get_rec_val "$path" "node.name")
|
|
tgt_ipaddr=$(kdump_iscsi_get_rec_val "$path" "node.conn\[0\].address")
|
|
|
|
# get and set username and password details
|
|
username=$(kdump_iscsi_get_rec_val "$path" "node.session.auth.username")
|
|
[[ $username == "<empty>" ]] && username=""
|
|
password=$(kdump_iscsi_get_rec_val "$path" "node.session.auth.password")
|
|
[[ $password == "<empty>" ]] && password=""
|
|
username_in=$(kdump_iscsi_get_rec_val "$path" "node.session.auth.username_in")
|
|
[[ -n $username ]] && userpwd_str="$username:$password"
|
|
|
|
# get and set incoming username and password details
|
|
[[ $username_in == "<empty>" ]] && username_in=""
|
|
password_in=$(kdump_iscsi_get_rec_val "$path" "node.session.auth.password_in")
|
|
[[ $password_in == "<empty>" ]] && password_in=""
|
|
|
|
[[ -n $username_in ]] && userpwd_in_str=":$username_in:$password_in"
|
|
|
|
kdump_collect_netif_usage "$tgt_ipaddr"
|
|
|
|
# prepare netroot= command line
|
|
# FIXME: Do we need to parse and set other parameters like protocol, port
|
|
# iscsi_iface_name, netdev_name, LUN etc.
|
|
|
|
if is_ipv6_address "$tgt_ipaddr"; then
|
|
tgt_ipaddr="[$tgt_ipaddr]"
|
|
fi
|
|
netroot_str="netroot=iscsi:${userpwd_str}${userpwd_in_str}@$tgt_ipaddr::::$tgt_name"
|
|
|
|
[[ -f $netroot_conf ]] || touch "$netroot_conf"
|
|
|
|
# If netroot target does not exist already, append.
|
|
if ! grep -q "$netroot_str" "$netroot_conf"; then
|
|
echo "$netroot_str" >> "$netroot_conf"
|
|
dinfo "Appended $netroot_str to $netroot_conf"
|
|
fi
|
|
|
|
# Setup initator
|
|
if ! initiator_str=$(kdump_get_iscsi_initiator); then
|
|
derror "Failed to get initiator name"
|
|
return 1
|
|
fi
|
|
|
|
# If initiator details do not exist already, append.
|
|
if ! grep -q "$initiator_str" "$netroot_conf"; then
|
|
echo "$initiator_str" >> "$netroot_conf"
|
|
dinfo "Appended $initiator_str to $netroot_conf"
|
|
fi
|
|
}
|
|
|
|
kdump_check_iscsi_targets() {
|
|
# If our prerequisites are not met, fail anyways.
|
|
type -P iscsistart > /dev/null || return 1
|
|
|
|
kdump_check_setup_iscsi() (
|
|
local _dev
|
|
_dev=$1
|
|
|
|
[[ -L /sys/dev/block/$_dev ]] || return
|
|
cd "$(readlink -f "/sys/dev/block/$_dev")" || return 1
|
|
until [[ -d sys || -d iscsi_session ]]; do
|
|
cd ..
|
|
done
|
|
[[ -d iscsi_session ]] && kdump_setup_iscsi_device "$PWD"
|
|
)
|
|
|
|
[[ $hostonly ]] || [[ $mount_needs ]] && {
|
|
for_each_host_dev_and_slaves_all kdump_check_setup_iscsi
|
|
}
|
|
}
|
|
|
|
# hostname -a is deprecated, do it by ourself
|
|
get_alias() {
|
|
local ips
|
|
local entries
|
|
local alias_set
|
|
|
|
ips=$(hostname -I)
|
|
for ip in $ips; do
|
|
# in /etc/hosts, alias can come at the 2nd column
|
|
if entries=$(grep "$ip" /etc/hosts | awk '{ $1=""; print $0 }'); then
|
|
alias_set="$alias_set $entries"
|
|
fi
|
|
done
|
|
|
|
echo "$alias_set"
|
|
}
|
|
|
|
is_localhost() {
|
|
local hostnames
|
|
local shortnames
|
|
local aliasname
|
|
local nodename=$1
|
|
|
|
hostnames=$(hostname -A)
|
|
shortnames=$(hostname -A -s)
|
|
aliasname=$(get_alias)
|
|
hostnames="$hostnames $shortnames $aliasname"
|
|
|
|
for name in ${hostnames}; do
|
|
if [[ $name == "$nodename" ]]; then
|
|
return 0
|
|
fi
|
|
done
|
|
return 1
|
|
}
|
|
|
|
# retrieves fence_kdump nodes from Pacemaker cluster configuration
|
|
get_pcs_fence_kdump_nodes() {
|
|
local nodes
|
|
|
|
pcs cluster sync > /dev/null 2>&1 && pcs cluster cib-upgrade > /dev/null 2>&1
|
|
# get cluster nodes from cluster cib, get interface and ip address
|
|
nodelist=$(pcs cluster cib | xmllint --xpath "/cib/status/node_state/@uname" -)
|
|
|
|
# nodelist is formed as 'uname="node1" uname="node2" ... uname="nodeX"'
|
|
# we need to convert each to node1, node2 ... nodeX in each iteration
|
|
for node in ${nodelist}; do
|
|
# convert $node from 'uname="nodeX"' to 'nodeX'
|
|
eval "$node"
|
|
nodename="$uname"
|
|
# Skip its own node name
|
|
if is_localhost "$nodename"; then
|
|
continue
|
|
fi
|
|
nodes="$nodes $nodename"
|
|
done
|
|
|
|
echo "$nodes"
|
|
}
|
|
|
|
# retrieves fence_kdump args from config file
|
|
get_pcs_fence_kdump_args() {
|
|
if [[ -f $FENCE_KDUMP_CONFIG_FILE ]]; then
|
|
. "$FENCE_KDUMP_CONFIG_FILE"
|
|
echo "$FENCE_KDUMP_OPTS"
|
|
fi
|
|
}
|
|
|
|
get_generic_fence_kdump_nodes() {
|
|
local filtered
|
|
local nodes
|
|
|
|
nodes=$(kdump_get_conf_val "fence_kdump_nodes")
|
|
for node in ${nodes}; do
|
|
# Skip its own node name
|
|
if is_localhost "$node"; then
|
|
continue
|
|
fi
|
|
filtered="$filtered $node"
|
|
done
|
|
echo "$filtered"
|
|
}
|
|
|
|
# setup fence_kdump in cluster
|
|
# setup proper network and install needed files
|
|
kdump_configure_fence_kdump() {
|
|
local kdump_cfg_file=$1
|
|
local nodes
|
|
local args
|
|
|
|
if is_generic_fence_kdump; then
|
|
nodes=$(get_generic_fence_kdump_nodes)
|
|
|
|
elif is_pcs_fence_kdump; then
|
|
nodes=$(get_pcs_fence_kdump_nodes)
|
|
|
|
# set appropriate options in kdump.conf
|
|
echo "fence_kdump_nodes $nodes" >> "${kdump_cfg_file}"
|
|
|
|
args=$(get_pcs_fence_kdump_args)
|
|
if [[ -n $args ]]; then
|
|
echo "fence_kdump_args $args" >> "${kdump_cfg_file}"
|
|
fi
|
|
|
|
else
|
|
# fence_kdump not configured
|
|
return 1
|
|
fi
|
|
|
|
# setup network for each node
|
|
for node in ${nodes}; do
|
|
kdump_collect_netif_usage "$node"
|
|
done
|
|
|
|
dracut_install /etc/hosts
|
|
dracut_install /etc/nsswitch.conf
|
|
dracut_install "$FENCE_KDUMP_SEND"
|
|
}
|
|
|
|
# Install a random seed used to feed /dev/urandom
|
|
# By the time kdump service starts, /dev/uramdom is already fed by systemd
|
|
kdump_install_random_seed() {
|
|
local poolsize
|
|
|
|
poolsize=$(< /proc/sys/kernel/random/poolsize)
|
|
|
|
if [[ ! -d "${initdir}/var/lib/" ]]; then
|
|
mkdir -p "${initdir}/var/lib/"
|
|
fi
|
|
|
|
dd if=/dev/urandom of="${initdir}/var/lib/random-seed" \
|
|
bs="$poolsize" count=1 2> /dev/null
|
|
}
|
|
|
|
kdump_install_systemd_conf() {
|
|
# Kdump turns out to require longer default systemd mount timeout
|
|
# than 1st kernel(90s by default), we use default 300s for kdump.
|
|
if ! grep -q -r "^[[:space:]]*DefaultTimeoutStartSec=" "${initdir}/etc/systemd/system.conf"*; then
|
|
mkdir -p "${initdir}/etc/systemd/system.conf.d"
|
|
echo "[Manager]" > "${initdir}/etc/systemd/system.conf.d/kdump.conf"
|
|
echo "DefaultTimeoutStartSec=300s" >> "${initdir}/etc/systemd/system.conf.d/kdump.conf"
|
|
fi
|
|
|
|
# Forward logs to console directly, and don't read Kmsg, this avoids
|
|
# unneccessary memory consumption and make console output more useful.
|
|
# Only do so for non fadump image.
|
|
mkdir -p "${initdir}/etc/systemd/journald.conf.d"
|
|
echo "[Journal]" > "${initdir}/etc/systemd/journald.conf.d/kdump.conf"
|
|
echo "Storage=volatile" >> "${initdir}/etc/systemd/journald.conf.d/kdump.conf"
|
|
echo "ReadKMsg=no" >> "${initdir}/etc/systemd/journald.conf.d/kdump.conf"
|
|
echo "ForwardToConsole=yes" >> "${initdir}/etc/systemd/journald.conf.d/kdump.conf"
|
|
}
|
|
|
|
remove_cpu_online_rule() {
|
|
local file=${initdir}/usr/lib/udev/rules.d/40-redhat.rules
|
|
|
|
if [[ -f $file ]]; then
|
|
sed -i '/SUBSYSTEM=="cpu"/d' "$file"
|
|
fi
|
|
}
|
|
|
|
install() {
|
|
declare -A unique_netifs ipv4_usage ipv6_usage
|
|
local arch
|
|
|
|
kdump_module_init
|
|
kdump_install_conf
|
|
remove_sysctl_conf
|
|
|
|
# Onlining secondary cpus breaks kdump completely on KVM on Power hosts
|
|
# Though we use maxcpus=1 by default but 40-redhat.rules will bring up all
|
|
# possible cpus by default. (rhbz1270174 rhbz1266322)
|
|
# Thus before we get the kernel fix and the systemd rule fix let's remove
|
|
# the cpu online rule in kdump initramfs.
|
|
arch=$(uname -m)
|
|
if [[ "$arch" = "ppc64le" ]] || [[ "$arch" = "ppc64" ]]; then
|
|
remove_cpu_online_rule
|
|
fi
|
|
|
|
if is_ssh_dump_target; then
|
|
kdump_install_random_seed
|
|
fi
|
|
dracut_install -o /etc/adjtime /etc/localtime
|
|
inst "$moddir/monitor_dd_progress" "/kdumpscripts/monitor_dd_progress"
|
|
chmod +x "${initdir}/kdumpscripts/monitor_dd_progress"
|
|
inst "/bin/dd" "/bin/dd"
|
|
inst "/bin/tail" "/bin/tail"
|
|
inst "/bin/date" "/bin/date"
|
|
inst "/bin/sync" "/bin/sync"
|
|
inst "/bin/cut" "/bin/cut"
|
|
inst "/bin/head" "/bin/head"
|
|
inst "/bin/awk" "/bin/awk"
|
|
inst "/bin/sed" "/bin/sed"
|
|
inst "/bin/stat" "/bin/stat"
|
|
inst "/sbin/makedumpfile" "/sbin/makedumpfile"
|
|
inst "/sbin/vmcore-dmesg" "/sbin/vmcore-dmesg"
|
|
inst "/usr/bin/printf" "/sbin/printf"
|
|
inst "/usr/bin/logger" "/sbin/logger"
|
|
inst "/usr/bin/chmod" "/sbin/chmod"
|
|
inst "/lib/kdump/kdump-lib-initramfs.sh" "/lib/kdump-lib-initramfs.sh"
|
|
inst "/lib/kdump/kdump-logger.sh" "/lib/kdump-logger.sh"
|
|
inst "$moddir/kdump.sh" "/usr/bin/kdump.sh"
|
|
inst "$moddir/kdump-capture.service" "$systemdsystemunitdir/kdump-capture.service"
|
|
systemctl -q --root "$initdir" add-wants initrd.target kdump-capture.service
|
|
# Replace existing emergency service and emergency target
|
|
cp "$moddir/kdump-emergency.service" "$initdir/$systemdsystemunitdir/emergency.service"
|
|
cp "$moddir/kdump-emergency.target" "$initdir/$systemdsystemunitdir/emergency.target"
|
|
# Also redirect dracut-emergency to kdump error handler
|
|
ln_r "$systemdsystemunitdir/emergency.service" "$systemdsystemunitdir/dracut-emergency.service"
|
|
|
|
# Check for all the devices and if any device is iscsi, bring up iscsi
|
|
# target. Ideally all this should be pushed into dracut iscsi module
|
|
# at some point of time.
|
|
kdump_check_iscsi_targets
|
|
|
|
kdump_install_systemd_conf
|
|
|
|
# nfs/ssh dump will need to get host ip in second kernel and need to call 'ip' tool, see get_host_ip for more detail
|
|
if is_nfs_dump_target || is_ssh_dump_target; then
|
|
inst "ip"
|
|
fi
|
|
|
|
kdump_install_net
|
|
|
|
# For the lvm type target under kdump, in /etc/lvm/lvm.conf we can
|
|
# safely replace "reserved_memory=XXXX"(default value is 8192) with
|
|
# "reserved_memory=1024" to lower memory pressure under kdump. We do
|
|
# it unconditionally here, if "/etc/lvm/lvm.conf" doesn't exist, it
|
|
# actually does nothing.
|
|
sed -i -e \
|
|
's/\(^[[:space:]]*reserved_memory[[:space:]]*=\)[[:space:]]*[[:digit:]]*/\1 1024/' \
|
|
"${initdir}/etc/lvm/lvm.conf" &> /dev/null
|
|
|
|
# Save more memory by dropping switch root capability
|
|
dracut_no_switch_root
|
|
}
|