kexec-tools/kdump-logger.sh
Lianbo Jiang 5b2b7ec08b Remove unused log levels for kdump logger
Previously, the range of log level is from 1 to 6, and the TRACE
level and FATAL level are not used, therefore, let's remove these
unused log levels.

Now it has only four log levels: error(1), warn(2), info(3)
and debug(4). We have to remap the numeric log level to the logger
priority or syslog log level, which is finished in kdump-logger.sh
module, it is invisible for user.

Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2020-11-13 02:42:48 +08:00

299 lines
8.2 KiB
Bash
Executable File

#!/bin/bash
#
# This comes from the dracut-logger.sh
#
# The logger defined 4 logging levels:
# - ddebug (4)
# The DEBUG Level designates fine-grained informational events that are most
# useful to debug an application.
# - dinfo (3)
# The INFO level designates informational messages that highlight the
# progress of the application at coarse-grained level.
# - dwarn (2)
# The WARN level designates potentially harmful situations.
# - derror (1)
# The ERROR level designates error events that might still allow the
# application to continue running.
#
# Logging is controlled by following global variables:
# - @var kdump_stdloglvl - logging level to standard error (console output)
# - @var kdump_sysloglvl - logging level to syslog (by logger command)
# - @var kdump_kmsgloglvl - logging level to /dev/kmsg (only for boot-time)
#
# If any of the variables is not set, this function set it to default:
# - @var kdump_stdloglvl = 3 (info)
# - @var kdump_sysloglvl = 3 (info)
# - @var kdump_kmsgloglvl = 0 (no logging)
#
# First of all you have to start with dlog_init() function which initializes
# required variables. Don't call any other logging function before that one!
#
# @brief Check the log level.
# @retval 1 if something has gone wrong
# @retval 0 on success.
#
check_loglvl()
{
case "$1" in
0|1|2|3|4)
return 0
;;
*)
return 1
;;
esac
}
# @brief Initializes Logger.
# @retval 1 if something has gone wrong
# @retval 0 on success.
#
dlog_init() {
local ret=0; local errmsg
[ -z "$kdump_stdloglvl" ] && kdump_stdloglvl=3
[ -z "$kdump_sysloglvl" ] && kdump_sysloglvl=3
[ -z "$kdump_kmsgloglvl" ] && kdump_kmsgloglvl=0
for loglvl in "$kdump_stdloglvl" "$kdump_kmsgloglvl" "$kdump_sysloglvl"; do
check_loglvl "$loglvl"
if [ $? -ne 0 ]; then
echo "Illegal log level: $kdump_stdloglvl $kdump_kmsgloglvl $kdump_sysloglvl"
return 1
fi
done
# Skip initialization if it's already done.
[ -n "$kdump_maxloglvl" ] && return 0
if [[ $UID -ne 0 ]]; then
kdump_kmsgloglvl=0
kdump_sysloglvl=0
fi
if [[ $kdump_sysloglvl -gt 0 ]]; then
if [[ -d /run/systemd/journal ]] \
&& type -P systemd-cat &>/dev/null \
&& systemctl --quiet is-active systemd-journald.socket &>/dev/null; then
readonly _systemdcatfile="/var/tmp/systemd-cat"
mkfifo "$_systemdcatfile" &>/dev/null
readonly _dlogfd=15
systemd-cat -t 'kdump' --level-prefix=true <"$_systemdcatfile" &
exec 15>"$_systemdcatfile"
elif ! [ -S /dev/log -a -w /dev/log ] || ! command -v logger >/dev/null; then
# We cannot log to syslog, so turn this facility off.
kdump_kmsgloglvl=$kdump_sysloglvl
kdump_sysloglvl=0
ret=1
errmsg="No '/dev/log' or 'logger' included for syslog logging"
fi
fi
local lvl; local maxloglvl_l=0
for lvl in $kdump_stdloglvl $kdump_sysloglvl $kdump_kmsgloglvl; do
[[ $lvl -gt $maxloglvl_l ]] && maxloglvl_l=$lvl
done
readonly kdump_maxloglvl=$maxloglvl_l
export kdump_maxloglvl
if [[ $kdump_stdloglvl -lt 4 ]] && [[ $kdump_kmsgloglvl -lt 4 ]] && [[ $kdump_sysloglvl -lt 4 ]]; then
unset ddebug
ddebug() { :; };
fi
if [[ $kdump_stdloglvl -lt 3 ]] && [[ $kdump_kmsgloglvl -lt 3 ]] && [[ $kdump_sysloglvl -lt 3 ]]; then
unset dinfo
dinfo() { :; };
fi
if [[ $kdump_stdloglvl -lt 2 ]] && [[ $kdump_kmsgloglvl -lt 2 ]] && [[ $kdump_sysloglvl -lt 2 ]]; then
unset dwarn
dwarn() { :; };
unset dwarning
dwarning() { :; };
fi
if [[ $kdump_stdloglvl -lt 1 ]] && [[ $kdump_kmsgloglvl -lt 1 ]] && [[ $kdump_sysloglvl -lt 1 ]]; then
unset derror
derror() { :; };
fi
[ -n "$errmsg" ] && derror "$errmsg"
return $ret
}
## @brief Converts numeric level to logger priority defined by POSIX.2.
#
# @param lvl Numeric logging level in range from 1 to 4.
# @retval 1 if @a lvl is out of range.
# @retval 0 if @a lvl is correct.
# @result Echoes logger priority.
_lvl2syspri() {
case "$1" in
1) echo error;;
2) echo warning;;
3) echo info;;
4) echo debug;;
*) return 1;;
esac
}
## @brief Converts logger numeric level to syslog log level
#
# @param lvl Numeric logging level in range from 1 to 4.
# @retval 1 if @a lvl is out of range.
# @retval 0 if @a lvl is correct.
# @result Echoes kernel console numeric log level
#
# Conversion is done as follows:
#
# <tt>
# none -> LOG_EMERG (0)
# none -> LOG_ALERT (1)
# none -> LOG_CRIT (2)
# ERROR(1) -> LOG_ERR (3)
# WARN(2) -> LOG_WARNING (4)
# none -> LOG_NOTICE (5)
# INFO(3) -> LOG_INFO (6)
# DEBUG(4) -> LOG_DEBUG (7)
# </tt>
#
# @see /usr/include/sys/syslog.h
_dlvl2syslvl() {
local lvl
case "$1" in
1) lvl=3;;
2) lvl=4;;
3) lvl=6;;
4) lvl=7;;
*) return 1;;
esac
[ -s /proc/vmcore ] && echo $((24+$lvl)) || echo $((8+$lvl))
}
## @brief Prints to stderr, to syslog and/or /dev/kmsg given message with
# given level (priority).
#
# @param lvl Numeric logging level.
# @param msg Message.
# @retval 0 It's always returned, even if logging failed.
#
# @note This function is not supposed to be called manually. Please use
# dinfo(), ddebug(), or others instead which wrap this one.
#
# This is core logging function which logs given message to standard error
# and/or syslog (with POSIX shell command <tt>logger</tt>) and/or to /dev/kmsg.
# The format is following:
#
# <tt>X: some message</tt>
#
# where @c X is the first letter of logging level. See module description for
# details on that.
#
# Message to syslog is sent with tag @c kdump. Priorities are mapped as
# following:
# - @c ERROR to @c error
# - @c WARN to @c warning
# - @c INFO to @c info
# - @c DEBUG to @c debug
_do_dlog() {
local lvl="$1"; shift
local msg="$*"
[[ $lvl -le $kdump_stdloglvl ]] && printf -- 'kdump: %s\n' "$msg" >&2
if [[ $lvl -le $kdump_sysloglvl ]]; then
if [[ "$_dlogfd" ]]; then
printf -- "<%s>%s\n" "$(($(_dlvl2syslvl $lvl) & 7))" "$msg" >&$_dlogfd
else
logger -t "kdump[$$]" -p $(_lvl2syspri $lvl) -- "$msg"
fi
fi
[[ $lvl -le $kdump_kmsgloglvl ]] && \
echo "<$(_dlvl2syslvl $lvl)>kdump[$$] $msg" >/dev/kmsg
}
## @brief Internal helper function for _do_dlog()
#
# @param lvl Numeric logging level.
# @param msg Message.
# @retval 0 It's always returned, even if logging failed.
#
# @note This function is not supposed to be called manually. Please use
# dinfo(), ddebug(), or others instead which wrap this one.
#
# This function calls _do_dlog() either with parameter msg, or if
# none is given, it will read standard input and will use every line as
# a message.
#
# This enables:
# dwarn "This is a warning"
# echo "This is a warning" | dwarn
dlog() {
[ -z "$kdump_maxloglvl" ] && return 0
[[ $1 -le $kdump_maxloglvl ]] || return 0
if [[ $# -gt 1 ]]; then
_do_dlog "$@"
else
while read line || [ -n "$line" ]; do
_do_dlog "$1" "$line"
done
fi
}
## @brief Logs message at DEBUG level (4)
#
# @param msg Message.
# @retval 0 It's always returned, even if logging failed.
ddebug() {
set +x
dlog 4 "$@"
[ -n "$debug" ] && set -x || :
}
## @brief Logs message at INFO level (3)
#
# @param msg Message.
# @retval 0 It's always returned, even if logging failed.
dinfo() {
set +x
dlog 3 "$@"
[ -n "$debug" ] && set -x || :
}
## @brief Logs message at WARN level (2)
#
# @param msg Message.
# @retval 0 It's always returned, even if logging failed.
dwarn() {
set +x
dlog 2 "$@"
[ -n "$debug" ] && set -x || :
}
## @brief It's an alias to dwarn() function.
#
# @param msg Message.
# @retval 0 It's always returned, even if logging failed.
dwarning() {
set +x
dwarn "$@"
[ -n "$debug" ] && set -x || :
}
## @brief Logs message at ERROR level (1)
#
# @param msg Message.
# @retval 0 It's always returned, even if logging failed.
derror() {
set +x
dlog 1 "$@"
[ -n "$debug" ] && set -x || :
}