2040103bd7
Check the number of cpus for x86_64 kdump kernel to boot with. We met an issue on x86_64: kdump runs out of vectors with the default "nr_cpus=1", when requesting tons of irqs. This patch detects such situation and warns users about the risk. The total number of vectors percpu is 256 defined by x86 architecture. The available vectors can be allocated to io devices percpu starts from FIRST_EXTERNAL_VECTOR(see kernel code), and some high-numbered ones are consumed by some system interrupts. As a result, the vectors for io device are within [FIRST_EXTERNAL_VECTOR, FIRST_SYSTEM_VECTOR), with one known exception, 0x80 within the range is reserved specially as the syscall vector. FIRST_EXTERNAL_VECTOR is invariably 32, while FIRST_SYSTEM_VECTOR can vary between different kernel versions. E.g. FIRST_SYSTEM_VECTOR gets 0xef(with CONFIG_X86_LOCAL_APIC on)for linux-4.10, that is 17 vectors reserved, considering it may increase in the future and the special vectors, we use a flexible variance and assume there are 32 reserved from FIRST_EXTERNAL_VECTOR. Then the max vectors for device interrupts percpu is: (256-32)-32=192, we acquire the number N of device interrupts from /proc/irq/, then the number of minimal cpus required is calculated: (N + 192 - 1) / 192 Signed-off-by: Xunlei Pang <xlpang@redhat.com> Acked-by: Pratyush Anand <panand@redhat.com> Acked-by: Dave Young <dyoung@redhat.com>
1278 lines
29 KiB
Bash
Executable File
1278 lines
29 KiB
Bash
Executable File
#! /bin/sh
|
|
KEXEC=/sbin/kexec
|
|
|
|
KDUMP_KERNELVER=""
|
|
KDUMP_COMMANDLINE=""
|
|
KEXEC_ARGS=""
|
|
KDUMP_CONFIG_FILE="/etc/kdump.conf"
|
|
MKDUMPRD="/sbin/mkdumprd -f"
|
|
SAVE_PATH=/var/crash
|
|
SSH_KEY_LOCATION="/root/.ssh/kdump_id_rsa"
|
|
INITRD_CHECKSUM_LOCATION="/boot/.fadump_initrd_checksum"
|
|
DUMP_TARGET=""
|
|
DEFAULT_INITRD=""
|
|
DEFAULT_INITRD_BAK=""
|
|
TARGET_INITRD=""
|
|
FADUMP_ENABLED_SYS_NODE="/sys/kernel/fadump_enabled"
|
|
FADUMP_REGISTER_SYS_NODE="/sys/kernel/fadump_registered"
|
|
#kdump shall be the default dump mode
|
|
DEFAULT_DUMP_MODE="kdump"
|
|
image_time=0
|
|
|
|
[[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut
|
|
. $dracutbasedir/dracut-functions.sh
|
|
. /lib/kdump/kdump-lib.sh
|
|
|
|
standard_kexec_args="-p"
|
|
|
|
# Some default values in case /etc/sysconfig/kdump doesn't include
|
|
KDUMP_COMMANDLINE_REMOVE="hugepages hugepagesz slub_debug"
|
|
|
|
if [ -f /etc/sysconfig/kdump ]; then
|
|
. /etc/sysconfig/kdump
|
|
fi
|
|
|
|
single_instance_lock()
|
|
{
|
|
local rc timeout=5
|
|
|
|
exec 9>/var/lock/kdump
|
|
|
|
flock -n 9
|
|
rc=$?
|
|
|
|
while [ $rc -ne 0 ]; do
|
|
echo "Another app is currently holding the kdump lock; waiting for it to exit..."
|
|
flock -w $timeout 9
|
|
rc=$?
|
|
done
|
|
}
|
|
|
|
determine_dump_mode()
|
|
{
|
|
# Check if firmware-assisted dump is enabled
|
|
# if yes, set the dump mode as fadump
|
|
if is_fadump_capable; then
|
|
echo "Dump mode is fadump"
|
|
DEFAULT_DUMP_MODE="fadump"
|
|
fi
|
|
}
|
|
|
|
# remove_cmdline_param <kernel cmdline> <param1> [<param2>] ... [<paramN>]
|
|
# Remove a list of kernel parameters from a given kernel cmdline and print the result.
|
|
# For each "arg" in the removing params list, "arg" and "arg=xxx" will be removed if exists.
|
|
remove_cmdline_param()
|
|
{
|
|
local cmdline=$1
|
|
shift
|
|
|
|
for arg in $@; do
|
|
cmdline=`echo $cmdline | \
|
|
sed -e "s/\b$arg=[^ ]*\b//g" \
|
|
-e "s/\b$arg\b//g" \
|
|
-e "s/\s\+/ /g"`
|
|
done
|
|
echo $cmdline
|
|
}
|
|
|
|
#
|
|
# This function returns the "initial apicid" of the
|
|
# boot cpu (cpu 0) if present.
|
|
#
|
|
get_bootcpu_initial_apicid()
|
|
{
|
|
awk ' \
|
|
BEGIN { CPU = "-1"; } \
|
|
$1=="processor" && $2==":" { CPU = $NF; } \
|
|
CPU=="0" && /initial apicid/ { print $NF; } \
|
|
' \
|
|
/proc/cpuinfo
|
|
}
|
|
|
|
#
|
|
# This function appends argument "$2=$3" to string ($1) if not already present.
|
|
#
|
|
append_cmdline()
|
|
{
|
|
local cmdline=$1
|
|
local newstr=${cmdline/$2/""}
|
|
|
|
# unchanged str implies argument wasn't there
|
|
if [ "$cmdline" == "$newstr" ]; then
|
|
cmdline="${cmdline} ${2}=${3}"
|
|
fi
|
|
|
|
echo $cmdline
|
|
}
|
|
|
|
# Check the number of cpus for kdump kernel to boot with.
|
|
# We met an issue on x86_64: kdump runs out of vectors with
|
|
# "nr_cpus=1" when requesting tons of irqs, so here we check
|
|
# "nr_cpus=1" and warn users if kdump probably can't work.
|
|
check_kdump_cpus()
|
|
{
|
|
local nr_origin nr_min nr_max
|
|
local arch=$(uname -m) cmdline=$KDUMP_COMMANDLINE_APPEND
|
|
|
|
if [ $arch != "x86_64" ]; then
|
|
return
|
|
fi
|
|
|
|
# We only care about the default "nr_cpus=1".
|
|
echo $cmdline | grep -E -q "nr_cpus=1[[:space:]]*|nr_cpus=1$"
|
|
if [ $? -ne 0 ]; then
|
|
return
|
|
fi
|
|
|
|
nr_origin=1
|
|
|
|
# Online cpus in first kernel.
|
|
nr_max=$(grep -c '^processor' /proc/cpuinfo)
|
|
|
|
# To calculate the estimated minimal cpus required.
|
|
nr_min=$(ls -ld /proc/irq/*/ | wc -l)
|
|
|
|
# Vectors for io device start from FIRST_EXTERNAL_VECTOR(32),
|
|
# some high-numbered ones starting from FIRST_EXTERNAL_VECTOR
|
|
# are reserved for system internal uses.
|
|
#
|
|
# We use a flexible variance and assume there are 32 reserved
|
|
# from FIRST_EXTERNAL_VECTOR. Then the total vectors for device
|
|
# interrupts percpu is: (256-32)-32=192.
|
|
#
|
|
# For "nr_cpus=1", irq and vector have the 1:1 mapping.
|
|
nr_min=$(($nr_min + 192 - 1))
|
|
nr_min=$(($nr_min / 192))
|
|
if [ $nr_min -gt 1 ]; then
|
|
# The system seems to have tons of interrupts. We need
|
|
# some further calculation of the number of cpus(>1).
|
|
# For "nr_cpus>1", irq and vector have the 1:M mapping,
|
|
# multiple-cpu affinity can consume multiple vectors.
|
|
# Luckily for x2apic which is commonly deployed on large
|
|
# modern machines, default case of boot, device bringup
|
|
# etc will use a single cpu to minimize vector pressure.
|
|
#
|
|
# For further safety, we add one more cpu and round it
|
|
# up to an even number.
|
|
nr_min=$(($nr_min + 1))
|
|
nr_min=$(($nr_min + $nr_min % 2))
|
|
fi
|
|
|
|
if [ $nr_min -gt $nr_max ]; then
|
|
nr_min=$nr_max
|
|
fi
|
|
|
|
if [ $nr_origin -ge $nr_min ]; then
|
|
return
|
|
fi
|
|
|
|
echo -n "Warning: nr_cpus=1 may not be enough for kdump boot,"
|
|
echo " try nr_cpus=$nr_min or larger instead"
|
|
}
|
|
|
|
# This function performs a series of edits on the command line.
|
|
# Store the final result in global $KDUMP_COMMANDLINE.
|
|
prepare_cmdline()
|
|
{
|
|
local cmdline id
|
|
|
|
if [ -z "$KDUMP_COMMANDLINE" ]; then
|
|
cmdline=`cat /proc/cmdline`
|
|
# 'root' parameter will cause kdump failure in live images
|
|
if [[ ${cmdline} == *"root=live:"* ]]; then
|
|
KDUMP_COMMANDLINE_REMOVE="${KDUMP_COMMANDLINE_REMOVE} root"
|
|
fi
|
|
else
|
|
cmdline=${KDUMP_COMMANDLINE}
|
|
fi
|
|
|
|
# These params should always be removed
|
|
cmdline=`remove_cmdline_param "$cmdline" crashkernel panic_on_warn`
|
|
# These params can be removed configurably
|
|
cmdline=`remove_cmdline_param "$cmdline" ${KDUMP_COMMANDLINE_REMOVE}`
|
|
|
|
cmdline="${cmdline} ${KDUMP_COMMANDLINE_APPEND}"
|
|
|
|
id=`get_bootcpu_initial_apicid`
|
|
if [ ! -z ${id} ] ; then
|
|
cmdline=`append_cmdline "${cmdline}" disable_cpu_apicid ${id}`
|
|
fi
|
|
|
|
KDUMP_COMMANDLINE=$cmdline
|
|
|
|
check_kdump_cpus
|
|
}
|
|
|
|
|
|
save_core()
|
|
{
|
|
coredir="/var/crash/`date +"%Y-%m-%d-%H:%M"`"
|
|
|
|
mkdir -p $coredir
|
|
cp --sparse=always /proc/vmcore $coredir/vmcore-incomplete
|
|
if [ $? == 0 ]; then
|
|
mv $coredir/vmcore-incomplete $coredir/vmcore
|
|
echo "saved a vmcore to $coredir"
|
|
else
|
|
echo "failed to save a vmcore to $coredir" >&2
|
|
fi
|
|
|
|
# pass the dmesg to Abrt tool if exists, in order
|
|
# to collect the kernel oops message.
|
|
# https://fedorahosted.org/abrt/
|
|
if [ -x /usr/bin/dumpoops ]; then
|
|
makedumpfile --dump-dmesg $coredir/vmcore $coredir/dmesg >/dev/null 2>&1
|
|
dumpoops -d $coredir/dmesg >/dev/null 2>&1
|
|
if [ $? == 0 ]; then
|
|
echo "kernel oops has been collected by abrt tool"
|
|
fi
|
|
fi
|
|
}
|
|
|
|
rebuild_fadump_initrd()
|
|
{
|
|
local target_initrd_tmp
|
|
|
|
# this file tells the initrd is fadump enabled
|
|
touch /tmp/fadump.initramfs
|
|
target_initrd_tmp="$TARGET_INITRD.tmp"
|
|
$MKDUMPRD $target_initrd_tmp --rebuild $TARGET_INITRD --kver $kdump_kver \
|
|
-i /tmp/fadump.initramfs /etc/fadump.initramfs
|
|
if [ $? != 0 ]; then
|
|
echo "mkdumprd: failed to rebuild initrd with fadump support" >&2
|
|
rm -f /tmp/fadump.initramfs
|
|
return 1
|
|
fi
|
|
rm -f /tmp/fadump.initramfs
|
|
|
|
# updating fadump initrd
|
|
mv $target_initrd_tmp $TARGET_INITRD
|
|
sync
|
|
|
|
return 0
|
|
}
|
|
|
|
rebuild_kdump_initrd()
|
|
{
|
|
$MKDUMPRD $TARGET_INITRD $kdump_kver
|
|
if [ $? != 0 ]; then
|
|
echo "mkdumprd: failed to make kdump initrd" >&2
|
|
return 1
|
|
fi
|
|
|
|
return 0
|
|
}
|
|
|
|
rebuild_initrd()
|
|
{
|
|
if [ $DEFAULT_DUMP_MODE == "fadump" ]; then
|
|
rebuild_fadump_initrd
|
|
else
|
|
rebuild_kdump_initrd
|
|
fi
|
|
|
|
return $?
|
|
}
|
|
|
|
#$1: the files to be checked with IFS=' '
|
|
check_exist()
|
|
{
|
|
for file in $1; do
|
|
if [ ! -f "$file" ]; then
|
|
echo -n "Error: $file not found."; echo
|
|
return 1
|
|
fi
|
|
done
|
|
}
|
|
|
|
#$1: the files to be checked with IFS=' '
|
|
check_executable()
|
|
{
|
|
for file in $1; do
|
|
if [ ! -x "$file" ]; then
|
|
echo -n "Error: $file is not executable."; echo
|
|
return 1
|
|
fi
|
|
done
|
|
}
|
|
|
|
backup_default_initrd()
|
|
{
|
|
if [ ! -e $DEFAULT_INITRD_BAK ]; then
|
|
echo "Backing up $DEFAULT_INITRD before rebuild."
|
|
# save checksum to verify before restoring
|
|
sha1sum $DEFAULT_INITRD > $INITRD_CHECKSUM_LOCATION
|
|
cp $DEFAULT_INITRD $DEFAULT_INITRD_BAK
|
|
if [ $? -ne 0 ]; then
|
|
echo "WARNING: failed to backup $DEFAULT_INITRD."
|
|
rm -f $DEFAULT_INITRD_BAK
|
|
fi
|
|
fi
|
|
}
|
|
|
|
restore_default_initrd()
|
|
{
|
|
# If a backup initrd exists, we must be switching back from
|
|
# fadump to kdump. Restore the original default initrd.
|
|
if [ -f $DEFAULT_INITRD_BAK ] && [ -f $INITRD_CHECKSUM_LOCATION ]; then
|
|
# verify checksum before restoring
|
|
backup_checksum=`sha1sum $DEFAULT_INITRD_BAK | awk '{ print $1 }'`
|
|
default_checksum=`cat $INITRD_CHECKSUM_LOCATION | awk '{ print $1 }'`
|
|
if [ "$default_checksum" != "$backup_checksum" ]; then
|
|
echo "WARNING: checksum mismatch! Can't restore original initrd.."
|
|
else
|
|
rm -f $INITRD_CHECKSUM_LOCATION
|
|
mv $DEFAULT_INITRD_BAK $DEFAULT_INITRD
|
|
if [[ $? -eq 0 ]]; then
|
|
echo -n "Restoring original initrd as fadump mode "
|
|
echo "is disabled."
|
|
sync
|
|
fi
|
|
fi
|
|
fi
|
|
}
|
|
|
|
check_config()
|
|
{
|
|
local nr
|
|
|
|
nr=$(awk 'BEGIN{cnt=0} /^raw|^ssh[[:blank:]]|^nfs|^ext[234]|^xfs|^btrfs|^minix|^dracut_args .*\-\-mount/{cnt++} END{print cnt}' $KDUMP_CONFIG_FILE)
|
|
[ $nr -gt 1 ] && {
|
|
echo "More than one dump targets specified."
|
|
return 1
|
|
}
|
|
|
|
nr=$(grep "^dracut_args .*\-\-mount" $KDUMP_CONFIG_FILE | grep -o "\-\-mount" | wc -l)
|
|
[ $nr -gt 1 ] && {
|
|
echo "Multiple mount targets specified in one \"dracut_args\"."
|
|
return 1
|
|
}
|
|
|
|
while read config_opt config_val; do
|
|
# remove inline comments after the end of a directive.
|
|
config_val=$(strip_comments $config_val)
|
|
case "$config_opt" in
|
|
\#* | "")
|
|
;;
|
|
raw|ext2|ext3|ext4|minix|btrfs|xfs|nfs|ssh|sshkey|path|core_collector|kdump_post|kdump_pre|extra_bins|extra_modules|default|force_rebuild|dracut_args|fence_kdump_args|fence_kdump_nodes)
|
|
[ -z "$config_val" ] && {
|
|
echo "Invalid kdump config value for option $config_opt."
|
|
return 1;
|
|
}
|
|
;;
|
|
net|options|link_delay|disk_timeout|debug_mem_level|blacklist)
|
|
echo "Deprecated kdump config option: $config_opt. Refer to kdump.conf manpage for alternatives."
|
|
return 1
|
|
;;
|
|
*)
|
|
echo "Invalid kdump config option $config_opt"
|
|
return 1;
|
|
;;
|
|
esac
|
|
done < $KDUMP_CONFIG_FILE
|
|
|
|
check_default_config || return 1
|
|
|
|
check_fence_kdump_config || return 1
|
|
|
|
return 0
|
|
}
|
|
|
|
# get_pcs_cluster_modified_files <image timestamp>
|
|
# return list of modified file for fence_kdump modified in Pacemaker cluster
|
|
get_pcs_cluster_modified_files()
|
|
{
|
|
local time_stamp
|
|
local modified_files
|
|
|
|
is_generic_fence_kdump && return 1
|
|
is_pcs_fence_kdump || return 1
|
|
|
|
time_stamp=`pcs cluster cib | xmllint --xpath 'string(/cib/@cib-last-written)' - | \
|
|
xargs -0 date +%s --date`
|
|
|
|
if [ -n $time_stamp -a $time_stamp -gt $image_time ]; then
|
|
modified_files="cluster-cib"
|
|
fi
|
|
|
|
if [ -f $FENCE_KDUMP_CONFIG_FILE ]; then
|
|
time_stamp=`stat -c "%Y" $FENCE_KDUMP_CONFIG_FILE`
|
|
if [ "$time_stamp" -gt "$image_time" ]; then
|
|
modified_files="$modified_files $FENCE_KDUMP_CONFIG_FILE"
|
|
fi
|
|
fi
|
|
|
|
echo $modified_files
|
|
}
|
|
|
|
check_boot_dir()
|
|
{
|
|
#If user specify a boot dir for kdump kernel, let's use it. Otherwise
|
|
#check whether it's a atomic host. If yes parse the subdirectory under
|
|
#/boot; If not just find it under /boot.
|
|
[ -n "$KDUMP_BOOTDIR" ] && return
|
|
|
|
if ! is_atomic || [ "$(uname -m)" = "s390x" ]; then
|
|
KDUMP_BOOTDIR="/boot"
|
|
else
|
|
eval $(cat /proc/cmdline| grep "BOOT_IMAGE" | cut -d' ' -f1)
|
|
KDUMP_BOOTDIR="/boot"$(dirname $BOOT_IMAGE)
|
|
fi
|
|
}
|
|
|
|
setup_initrd()
|
|
{
|
|
DEFAULT_INITRD="${KDUMP_BOOTDIR}/initramfs-`uname -r`.img"
|
|
DEFAULT_INITRD_BAK="${KDUMP_BOOTDIR}/.initramfs-`uname -r`.img.default"
|
|
if [ $DEFAULT_DUMP_MODE == "fadump" ]; then
|
|
TARGET_INITRD="$DEFAULT_INITRD"
|
|
if [ ! -s "$TARGET_INITRD" ]; then
|
|
echo "Error: No initrd found to rebuild!"
|
|
return 1
|
|
fi
|
|
else
|
|
TARGET_INITRD="${KDUMP_BOOTDIR}/initramfs-${kdump_kver}kdump.img"
|
|
fi
|
|
}
|
|
|
|
check_files_modified()
|
|
{
|
|
local modified_files=""
|
|
|
|
#also rebuild when Pacemaker cluster conf is changed and fence kdump is enabled.
|
|
modified_files=$(get_pcs_cluster_modified_files)
|
|
|
|
EXTRA_BINS=`grep ^kdump_post $KDUMP_CONFIG_FILE | cut -d\ -f2`
|
|
CHECK_FILES=`grep ^kdump_pre $KDUMP_CONFIG_FILE | cut -d\ -f2`
|
|
EXTRA_BINS="$EXTRA_BINS $CHECK_FILES"
|
|
CHECK_FILES=`grep ^extra_bins $KDUMP_CONFIG_FILE | cut -d\ -f2-`
|
|
EXTRA_BINS="$EXTRA_BINS $CHECK_FILES"
|
|
files="$KDUMP_CONFIG_FILE $kdump_kernel $EXTRA_BINS"
|
|
[[ -e /etc/fstab ]] && files="$files /etc/fstab"
|
|
|
|
check_exist "$files" && check_executable "$EXTRA_BINS"
|
|
[ $? -ne 0 ] && return 2
|
|
|
|
for file in $files; do
|
|
time_stamp=`stat -c "%Y" $file`
|
|
if [ "$time_stamp" -gt "$image_time" ]; then
|
|
modified_files="$modified_files $file"
|
|
fi
|
|
done
|
|
if [ -n "$modified_files" ]; then
|
|
echo "Detected change(s) in the following file(s):"
|
|
echo -n " "; echo "$modified_files" | sed 's/\s/\n /g'
|
|
return 1
|
|
fi
|
|
|
|
return 0
|
|
}
|
|
|
|
check_dump_fs_modified()
|
|
{
|
|
local _old_dev _old_mntpoint _old_fstype
|
|
local _new_dev _new_mntpoint _new_fstype
|
|
local _target _path _dracut_args
|
|
|
|
# No need to check in case of mount target specified via "dracut_args".
|
|
if is_mount_in_dracut_args; then
|
|
return 0
|
|
fi
|
|
|
|
# No need to check in case of raw target.
|
|
# Currently we do not check also if ssh/nfs target is specified
|
|
if is_ssh_dump_target || is_nfs_dump_target || is_raw_dump_target; then
|
|
return 0
|
|
fi
|
|
|
|
_target=$(get_user_configured_dump_disk)
|
|
|
|
if [[ -n "$_target" ]]; then
|
|
_target=$(to_dev_name $_target)
|
|
_new_fstype=$(blkid $_target | awk -F"TYPE=" '{print $2}' | cut -d '"' -f 2)
|
|
else
|
|
_path=$(get_save_path)
|
|
_target=$(get_target_from_path $_path)
|
|
_target=$(to_dev_name $_target)
|
|
_new_fstype=$(get_fs_type_from_target $_target)
|
|
if [[ -z "$_target" || -z "$_new_fstype" ]];then
|
|
echo "Dump path $_path does not exist"
|
|
return 2
|
|
fi
|
|
fi
|
|
|
|
if [[ $(expr substr $_new_fstype 1 3) = "nfs" ]];then
|
|
_new_dev=$_target
|
|
else
|
|
_new_dev=$(get_persistent_dev $_target)
|
|
if [ -z "$_new_dev" ]; then
|
|
echo "Get persistent device name failed"
|
|
return 2
|
|
fi
|
|
fi
|
|
|
|
if ! findmnt $_target >/dev/null; then
|
|
echo "Dump target $_target is probably not mounted."
|
|
return 2
|
|
fi
|
|
_new_mntpoint="/kdumproot/$(get_mntpoint_from_target $_target)"
|
|
|
|
_dracut_args=$(lsinitrd $TARGET_INITRD | grep "^Arguments:" | head -1)
|
|
if [[ -z "$_dracut_args" ]];then
|
|
echo "Warning: No dracut arguments found in initrd"
|
|
return 0
|
|
fi
|
|
|
|
# if --mount argument present then match old and new target, mount
|
|
# point and file system. If any of them mismatches then rebuild
|
|
echo $_dracut_args | grep "\-\-mount" &> /dev/null
|
|
if [[ $? -eq 0 ]];then
|
|
set -- $(echo $_dracut_args | awk -F "--mount '" '{print $2}' | cut -d' ' -f1,2,3)
|
|
_old_dev=$1
|
|
_old_mntpoint=$2
|
|
_old_fstype=$3
|
|
[[ $_new_dev = $_old_dev && $_new_mntpoint = $_old_mntpoint && $_new_fstype = $_old_fstype ]] && return 0
|
|
# otherwise rebuild if target device is not a root device
|
|
else
|
|
[[ "$_target" = "$(get_root_fs_device)" ]] && return 0
|
|
fi
|
|
|
|
echo "Detected change in File System"
|
|
return 1
|
|
}
|
|
|
|
check_wdt_modified()
|
|
{
|
|
is_wdt_mod_omitted
|
|
[[ $? -eq 0 ]] && return 0
|
|
[[ -d /sys/class/watchdog/ ]] || return 0
|
|
|
|
for dir in /sys/class/watchdog/*; do
|
|
[[ -d "$dir" ]] || continue
|
|
[[ -f "$dir/state" ]] || continue
|
|
wdtdrv=$(< "$dir/device/modalias")
|
|
wdtdrv=$(modinfo $wdtdrv | grep filename | awk -F"kernel/" '{print $2}')
|
|
active=$(< "$dir/state")
|
|
# rebuild when:
|
|
# module for this watchdog is not found and watchdog is active
|
|
# module for this watchdog is found and watchdog is inactive
|
|
lsinitrd $TARGET_INITRD | grep $wdtdrv &> /dev/null
|
|
if [ $? -ne 0 ]; then
|
|
[[ "$active" = "active" ]] && return 1
|
|
else
|
|
[[ "$active" = "inactive" ]] && return 1
|
|
fi
|
|
done
|
|
|
|
# check if watchdog kernel module unloaded.
|
|
loaded_mods=$(lsinitrd $TARGET_INITRD -f etc/cmdline.d/00-watchdog.conf)
|
|
[[ -n $loaded_mods ]] && loaded_mods=$(echo $loaded_mods | awk -F"rd.driver.pre=" '{print $2}' | sed "s/,/ /g")
|
|
for mod in $loaded_mods ; do
|
|
lsmod | grep $mod &> /dev/null
|
|
[[ $? != 0 ]] && return 1
|
|
done
|
|
|
|
return 0
|
|
}
|
|
|
|
# returns 0 if system is not modified
|
|
# returns 1 if system is modified
|
|
# returns 2 if system modification is invalid
|
|
check_system_modified()
|
|
{
|
|
local ret
|
|
|
|
[[ -f $TARGET_INITRD ]] || return 1
|
|
|
|
check_files_modified
|
|
ret=$?
|
|
if [ $ret -ne 0 ]; then
|
|
return $ret
|
|
fi
|
|
|
|
check_dump_fs_modified
|
|
ret=$?
|
|
if [ $ret -ne 0 ]; then
|
|
return $ret
|
|
fi
|
|
|
|
check_wdt_modified
|
|
if [ $? -ne 0 ]; then
|
|
echo "Detected change in watchdog state"
|
|
return 1
|
|
fi
|
|
|
|
return 0
|
|
}
|
|
|
|
check_rebuild()
|
|
{
|
|
local extra_modules
|
|
local _force_rebuild force_rebuild="0"
|
|
local ret system_modified="0"
|
|
|
|
check_boot_dir
|
|
|
|
if [ -z "$KDUMP_KERNELVER" ]; then
|
|
kdump_kver=`uname -r`
|
|
else
|
|
kdump_kver=$KDUMP_KERNELVER
|
|
fi
|
|
|
|
kdump_kernel="${KDUMP_BOOTDIR}/${KDUMP_IMG}-${kdump_kver}${KDUMP_IMG_EXT}"
|
|
setup_initrd
|
|
if [ $? -ne 0 ]; then
|
|
return 1
|
|
fi
|
|
|
|
_force_rebuild=`grep ^force_rebuild $KDUMP_CONFIG_FILE 2>/dev/null`
|
|
if [ $? -eq 0 ]; then
|
|
force_rebuild=`echo $_force_rebuild | cut -d' ' -f2`
|
|
if [ "$force_rebuild" != "0" ] && [ "$force_rebuild" != "1" ];then
|
|
echo "Error: force_rebuild value is invalid"
|
|
return 1
|
|
fi
|
|
fi
|
|
|
|
#will rebuild every time if extra_modules are specified
|
|
extra_modules=`grep ^extra_modules $KDUMP_CONFIG_FILE`
|
|
[ -n "$extra_modules" ] && force_rebuild="1"
|
|
|
|
#check to see if dependent files has been modified
|
|
#since last build of the image file
|
|
if [ -f $TARGET_INITRD ]; then
|
|
image_time=`stat -c "%Y" $TARGET_INITRD 2>/dev/null`
|
|
fi
|
|
|
|
check_system_modified
|
|
ret=$?
|
|
if [ $ret -eq 2 ]; then
|
|
return 1
|
|
elif [ $ret -eq 1 ];then
|
|
system_modified="1"
|
|
fi
|
|
|
|
if is_mode_switched; then
|
|
echo -n "Dump mode changed from last boot."; echo
|
|
handle_mode_switch
|
|
elif [ $image_time -eq 0 ]; then
|
|
echo -n "No kdump initial ramdisk found."; echo
|
|
elif [ "$force_rebuild" != "0" ]; then
|
|
echo -n "Force rebuild $TARGET_INITRD"; echo
|
|
elif [ "$system_modified" != "0" ]; then
|
|
:
|
|
else
|
|
return 0
|
|
fi
|
|
|
|
if [[ ! -w "$KDUMP_BOOTDIR" ]];then
|
|
echo "$KDUMP_BOOTDIR does not have write permission. Can not rebuild $TARGET_INITRD"
|
|
return 1
|
|
fi
|
|
|
|
echo "Rebuilding $TARGET_INITRD"
|
|
rebuild_initrd
|
|
return $?
|
|
}
|
|
|
|
# This function check iomem and determines if we have more than
|
|
# 4GB of ram available. Returns 1 if we do, 0 if we dont
|
|
need_64bit_headers()
|
|
{
|
|
return `tail -n 1 /proc/iomem | awk '{ split ($1, r, "-"); \
|
|
print (strtonum("0x" r[2]) > strtonum("0xffffffff")); }'`
|
|
}
|
|
|
|
# Load the kdump kernel specified in /etc/sysconfig/kdump
|
|
# If none is specified, try to load a kdump kernel with the same version
|
|
# as the currently running kernel.
|
|
load_kdump()
|
|
{
|
|
ARCH=`uname -m`
|
|
if [ "$ARCH" == "i686" -o "$ARCH" == "i386" ]
|
|
then
|
|
|
|
need_64bit_headers
|
|
if [ $? == 1 ]
|
|
then
|
|
FOUND_ELF_ARGS=`echo $KEXEC_ARGS | grep elf32-core-headers`
|
|
if [ -n "$FOUND_ELF_ARGS" ]
|
|
then
|
|
echo -n "Warning: elf32-core-headers overrides correct elf64 setting"
|
|
echo
|
|
else
|
|
KEXEC_ARGS="$KEXEC_ARGS --elf64-core-headers"
|
|
fi
|
|
else
|
|
FOUND_ELF_ARGS=`echo $KEXEC_ARGS | grep elf64-core-headers`
|
|
if [ -z "$FOUND_ELF_ARGS" ]
|
|
then
|
|
KEXEC_ARGS="$KEXEC_ARGS --elf32-core-headers"
|
|
fi
|
|
fi
|
|
fi
|
|
|
|
prepare_cmdline
|
|
|
|
# For secureboot enabled machines, use new kexec file based syscall.
|
|
# Old syscall will always fail as it does not have capability to
|
|
# to kernel signature verification.
|
|
if is_secure_boot_enforced; then
|
|
echo "Secure Boot is enabled. Using kexec file based syscall."
|
|
KEXEC_ARGS="$KEXEC_ARGS -s"
|
|
fi
|
|
|
|
$KEXEC $KEXEC_ARGS $standard_kexec_args \
|
|
--command-line="$KDUMP_COMMANDLINE" \
|
|
--initrd=$TARGET_INITRD $kdump_kernel
|
|
if [ $? == 0 ]; then
|
|
echo "kexec: loaded kdump kernel"
|
|
return 0
|
|
else
|
|
echo "kexec: failed to load kdump kernel" >&2
|
|
return 1
|
|
fi
|
|
}
|
|
|
|
check_ssh_config()
|
|
{
|
|
while read config_opt config_val; do
|
|
# remove inline comments after the end of a directive.
|
|
config_val=$(strip_comments $config_val)
|
|
case "$config_opt" in
|
|
sshkey)
|
|
if [ -f "$config_val" ]; then
|
|
# canonicalize the path
|
|
SSH_KEY_LOCATION=$(/usr/bin/readlink -m $config_val)
|
|
else
|
|
echo "WARNING: '$config_val' doesn't exist, using default value '$SSH_KEY_LOCATION'"
|
|
fi
|
|
;;
|
|
path)
|
|
SAVE_PATH=$config_val
|
|
;;
|
|
ssh)
|
|
DUMP_TARGET=$config_val
|
|
;;
|
|
*)
|
|
;;
|
|
esac
|
|
done < $KDUMP_CONFIG_FILE
|
|
|
|
#make sure they've configured kdump.conf for ssh dumps
|
|
local SSH_TARGET=`echo -n $DUMP_TARGET | sed -n '/.*@/p'`
|
|
if [ -z "$SSH_TARGET" ]; then
|
|
return 1
|
|
fi
|
|
return 0
|
|
}
|
|
|
|
check_ssh_target()
|
|
{
|
|
local _ret
|
|
ssh -q -i $SSH_KEY_LOCATION -o BatchMode=yes $DUMP_TARGET mkdir -p $SAVE_PATH
|
|
_ret=$?
|
|
if [ $_ret -ne 0 ]; then
|
|
echo "Could not create $DUMP_TARGET:$SAVE_PATH, you probably need to run \"kdumpctl propagate\"" >&2
|
|
return 1
|
|
fi
|
|
return 0
|
|
}
|
|
|
|
propagate_ssh_key()
|
|
{
|
|
check_ssh_config
|
|
if [ $? -ne 0 ]; then
|
|
echo "No ssh config specified in $KDUMP_CONFIG_FILE. Can't propagate" >&2
|
|
exit 1
|
|
fi
|
|
|
|
local KEYFILE=$SSH_KEY_LOCATION
|
|
local errmsg="Failed to propagate ssh key"
|
|
|
|
#Check to see if we already created key, if not, create it.
|
|
if [ -f $KEYFILE ]; then
|
|
echo "Using existing keys..."
|
|
else
|
|
echo -n "Generating new ssh keys... "
|
|
/usr/bin/ssh-keygen -t rsa -f $KEYFILE -N "" 2>&1 > /dev/null
|
|
echo "done."
|
|
fi
|
|
|
|
#now find the target ssh user and server to contact.
|
|
SSH_USER=`echo $DUMP_TARGET | cut -d\ -f2 | cut -d@ -f1`
|
|
SSH_SERVER=`echo $DUMP_TARGET | sed -e's/\(.*@\)\(.*$\)/\2/'`
|
|
|
|
#now send the found key to the found server
|
|
ssh-copy-id -i $KEYFILE $SSH_USER@$SSH_SERVER
|
|
RET=$?
|
|
if [ $RET == 0 ]; then
|
|
echo $KEYFILE has been added to ~$SSH_USER/.ssh/authorized_keys on $SSH_SERVER
|
|
return 0
|
|
else
|
|
echo $errmsg, $KEYFILE failed in transfer to $SSH_SERVER >&2
|
|
exit 1
|
|
fi
|
|
}
|
|
|
|
is_mode_switched()
|
|
{
|
|
local _mod_included
|
|
|
|
if [ ! -f $DEFAULT_INITRD ]; then
|
|
return 1
|
|
fi
|
|
|
|
# find if default initrd has kdumpbase module included.
|
|
_mod_included=`lsinitrd -m $DEFAULT_INITRD | grep ^kdumpbase$ | wc -l`
|
|
|
|
if [ "$DEFAULT_DUMP_MODE" != "fadump" ]; then
|
|
# If kdumpbase module is included in default initrd,
|
|
# we must have just switched from fadump mode.
|
|
if [ "$_mod_included" -eq "1" ]; then
|
|
return 0
|
|
fi
|
|
elif [ "$_mod_included" -eq "0" ]; then
|
|
# If kdumpbase module is missing in default initrd,
|
|
# we must have just switched from kdump mode.
|
|
return 0
|
|
fi
|
|
|
|
return 1
|
|
}
|
|
|
|
handle_mode_switch()
|
|
{
|
|
if [ "$DEFAULT_DUMP_MODE" == "fadump" ]; then
|
|
# backup initrd for reference before replacing it
|
|
# with fadump aware initrd
|
|
backup_default_initrd
|
|
else
|
|
# check if a backup of default initrd exists. If yes,
|
|
# it signifies a switch from fadump mode. So, restore
|
|
# the backed up default initrd.
|
|
restore_default_initrd
|
|
fi
|
|
}
|
|
|
|
is_fadump_capable()
|
|
{
|
|
# Check if firmware-assisted dump is enabled
|
|
# if no, fallback to kdump check
|
|
if [ -f $FADUMP_ENABLED_SYS_NODE ]; then
|
|
rc=`cat $FADUMP_ENABLED_SYS_NODE`
|
|
[ $rc -eq 1 ] && return 0
|
|
fi
|
|
return 1
|
|
}
|
|
|
|
check_current_fadump_status()
|
|
{
|
|
# Check if firmware-assisted dump has been registered.
|
|
rc=`cat $FADUMP_REGISTER_SYS_NODE`
|
|
[ $rc -eq 1 ] && return 0
|
|
return 1
|
|
}
|
|
|
|
check_current_kdump_status()
|
|
{
|
|
rc=`cat /sys/kernel/kexec_crash_loaded`
|
|
if [ $rc == 1 ]; then
|
|
return 0
|
|
else
|
|
return 1
|
|
fi
|
|
}
|
|
|
|
check_current_status()
|
|
{
|
|
if [ $DEFAULT_DUMP_MODE == "fadump" ]; then
|
|
check_current_fadump_status
|
|
else
|
|
check_current_kdump_status
|
|
fi
|
|
|
|
return $?
|
|
}
|
|
|
|
save_raw()
|
|
{
|
|
local kdump_dir
|
|
local raw_target
|
|
|
|
raw_target=$(awk '$1 ~ /^raw$/ { print $2; }' $KDUMP_CONFIG_FILE)
|
|
[ -z "$raw_target" ] && return 0
|
|
[ -b "$raw_target" ] || {
|
|
echo "raw partition $raw_target not found"
|
|
return 1
|
|
}
|
|
kdump_dir=`grep ^path $KDUMP_CONFIG_FILE | cut -d' ' -f2-`
|
|
if [ -z "${kdump_dir}" ]; then
|
|
coredir="/var/crash/`date +"%Y-%m-%d-%H:%M"`"
|
|
else
|
|
coredir="${kdump_dir}/`date +"%Y-%m-%d-%H:%M"`"
|
|
fi
|
|
|
|
mkdir -p "$coredir"
|
|
[ -d "$coredir" ] || {
|
|
echo "failed to create $coredir"
|
|
return 1
|
|
}
|
|
if makedumpfile -R $coredir/vmcore <$raw_target >/dev/null 2>&1; then
|
|
# dump found
|
|
echo "Dump saved to $coredir/vmcore"
|
|
# wipe makedumpfile header
|
|
dd if=/dev/zero of=$raw_target bs=1b count=1 2>/dev/null
|
|
else
|
|
rm -rf "$coredir"
|
|
fi
|
|
|
|
return 0
|
|
}
|
|
|
|
get_save_path()
|
|
{
|
|
local _save_path=$(grep "^path" /etc/kdump.conf|awk '{print $2}')
|
|
if [ -z "$_save_path" ]; then
|
|
_save_path="/var/crash"
|
|
fi
|
|
|
|
echo $_save_path
|
|
}
|
|
|
|
is_dump_target_configured()
|
|
{
|
|
local _target
|
|
|
|
_target=$(egrep "^ext[234]|^xfs|^btrfs|^minix|^raw|^ssh|^nfs" /etc/kdump.conf)
|
|
|
|
[ -n "$_target" ]
|
|
}
|
|
|
|
local_fs_dump_target()
|
|
{
|
|
local _target
|
|
|
|
_target=$(egrep "^ext[234]|^xfs|^btrfs|^minix" /etc/kdump.conf)
|
|
if [ $? -eq 0 ]; then
|
|
echo $_target|awk '{print $2}'
|
|
fi
|
|
}
|
|
|
|
path_to_be_relabeled()
|
|
{
|
|
local _path _target _mnt="/" _rmnt
|
|
|
|
if is_dump_target_configured; then
|
|
_target=$(local_fs_dump_target)
|
|
if [[ -n "$_target" ]]; then
|
|
_mnt=$(findmnt -k -f -n -r -o TARGET $_target)
|
|
if [ -z "$_mnt" ]; then
|
|
return
|
|
fi
|
|
else
|
|
return
|
|
fi
|
|
fi
|
|
|
|
_path=$(get_save_path)
|
|
# if $_path is masked by other mount, we will not relabel it.
|
|
_rmnt=$(df $_mnt/$_path 2>/dev/null | tail -1 | awk '{ print $NF }')
|
|
if [ "$_rmnt" == "$_mnt" ]; then
|
|
echo $_mnt/$_path
|
|
fi
|
|
}
|
|
|
|
selinux_relabel()
|
|
{
|
|
local _path _i _attr
|
|
|
|
_path=$(path_to_be_relabeled)
|
|
if [ -z "$_path" ] || ! [ -d "$_path" ] ; then
|
|
return
|
|
fi
|
|
|
|
for _i in $(find $_path); do
|
|
_attr=$(getfattr -m "security.selinux" $_i 2>/dev/null)
|
|
if [ -z "$_attr" ]; then
|
|
restorecon $_i;
|
|
fi
|
|
done
|
|
}
|
|
|
|
# Check if secure boot is being enforced.
|
|
#
|
|
# Per Peter Jones, we need check efivar SecureBoot-$(the UUID) and
|
|
# SetupMode-$(the UUID), they are both 5 bytes binary data. The first four
|
|
# bytes are the attributes associated with the variable and can safely be
|
|
# ignored, the last bytes are one-byte true-or-false variables. If SecureBoot
|
|
# is 1 and SetupMode is 0, then secure boot is being enforced.
|
|
#
|
|
# Assume efivars is mounted at /sys/firmware/efi/efivars.
|
|
is_secure_boot_enforced()
|
|
{
|
|
local secure_boot_file setup_mode_file
|
|
local secure_boot_byte setup_mode_byte
|
|
|
|
secure_boot_file=$(find /sys/firmware/efi/efivars -name SecureBoot-* 2>/dev/null)
|
|
setup_mode_file=$(find /sys/firmware/efi/efivars -name SetupMode-* 2>/dev/null)
|
|
|
|
if [ -f "$secure_boot_file" ] && [ -f "$setup_mode_file" ]; then
|
|
secure_boot_byte=$(hexdump -v -e '/1 "%d\ "' $secure_boot_file|cut -d' ' -f 5)
|
|
setup_mode_byte=$(hexdump -v -e '/1 "%d\ "' $setup_mode_file|cut -d' ' -f 5)
|
|
|
|
if [ "$secure_boot_byte" = "1" ] && [ "$setup_mode_byte" = "0" ]; then
|
|
return 0
|
|
fi
|
|
fi
|
|
|
|
return 1
|
|
}
|
|
|
|
check_crash_mem_reserved()
|
|
{
|
|
MEM_RESERVED=$(cat /sys/kernel/kexec_crash_size)
|
|
if [ $MEM_RESERVED -eq 0 ]
|
|
then
|
|
echo "No memory reserved for crash kernel." >&2
|
|
return 1
|
|
fi
|
|
|
|
return 0
|
|
}
|
|
|
|
check_kdump_feasibility()
|
|
{
|
|
if [ ! -e /sys/kernel/kexec_crash_loaded ]; then
|
|
echo "Kdump is not supported on this kernel"
|
|
return 1
|
|
fi
|
|
check_crash_mem_reserved
|
|
return $?
|
|
}
|
|
|
|
check_fence_kdump_config()
|
|
{
|
|
local hostname=`hostname`
|
|
local nodes=$(get_option_value "fence_kdump_nodes")
|
|
|
|
for node in $nodes; do
|
|
if [ "$node" = "$hostname" ]; then
|
|
echo "Option fence_kdump_nodes cannot contain $hostname"
|
|
return 1
|
|
fi
|
|
done
|
|
|
|
return 0
|
|
}
|
|
|
|
check_dump_feasibility()
|
|
{
|
|
if [ $DEFAULT_DUMP_MODE == "fadump" ]; then
|
|
return 0
|
|
fi
|
|
|
|
check_kdump_feasibility
|
|
return $?
|
|
}
|
|
|
|
start_fadump()
|
|
{
|
|
echo 1 > $FADUMP_REGISTER_SYS_NODE
|
|
if ! check_current_fadump_status; then
|
|
echo "fadump: failed to register"
|
|
return 1
|
|
fi
|
|
|
|
echo "fadump: registered successfully"
|
|
return 0
|
|
}
|
|
|
|
start_dump()
|
|
{
|
|
if [ $DEFAULT_DUMP_MODE == "fadump" ]; then
|
|
start_fadump
|
|
else
|
|
load_kdump
|
|
fi
|
|
|
|
return $?
|
|
}
|
|
|
|
check_default_config()
|
|
{
|
|
local default_option
|
|
|
|
default_option=$(awk '$1 ~ /^default$/ {print $2;}' $KDUMP_CONFIG_FILE)
|
|
if [ -z "$default_option" ]; then
|
|
return 0
|
|
else
|
|
case "$default_option" in
|
|
reboot|halt|poweroff|shell|dump_to_rootfs)
|
|
return 0
|
|
;;
|
|
*)
|
|
echo $"Usage kdump.conf: default {reboot|halt|poweroff|shell|dump_to_rootfs}"
|
|
return 1
|
|
esac
|
|
fi
|
|
}
|
|
|
|
start()
|
|
{
|
|
check_config
|
|
if [ $? -ne 0 ]; then
|
|
echo "Starting kdump: [FAILED]"
|
|
return 1
|
|
fi
|
|
|
|
if sestatus 2>/dev/null | grep -q "SELinux status.*enabled"; then
|
|
selinux_relabel
|
|
fi
|
|
save_raw
|
|
if [ $? -ne 0 ]; then
|
|
echo "Starting kdump: [FAILED]"
|
|
return 1
|
|
fi
|
|
|
|
check_dump_feasibility
|
|
if [ $? -ne 0 ]; then
|
|
echo "Starting kdump: [FAILED]"
|
|
return 1
|
|
fi
|
|
|
|
check_current_status
|
|
if [ $? == 0 ]; then
|
|
echo "Kdump already running: [WARNING]"
|
|
return 0
|
|
fi
|
|
|
|
if check_ssh_config; then
|
|
if ! check_ssh_target; then
|
|
echo "Starting kdump: [FAILED]"
|
|
return 1
|
|
fi
|
|
fi
|
|
|
|
check_rebuild
|
|
if [ $? != 0 ]; then
|
|
echo "Starting kdump: [FAILED]"
|
|
return 1
|
|
fi
|
|
|
|
start_dump
|
|
if [ $? != 0 ]; then
|
|
echo "Starting kdump: [FAILED]"
|
|
return 1
|
|
fi
|
|
|
|
echo "Starting kdump: [OK]"
|
|
}
|
|
|
|
stop_fadump()
|
|
{
|
|
echo 0 > $FADUMP_REGISTER_SYS_NODE
|
|
if check_current_fadump_status; then
|
|
echo "fadump: failed to unregister"
|
|
return 1
|
|
fi
|
|
|
|
echo "fadump: unregistered successfully"
|
|
return 0
|
|
}
|
|
|
|
stop_kdump()
|
|
{
|
|
if is_secure_boot_enforced; then
|
|
$KEXEC -s -p -u
|
|
else
|
|
$KEXEC -p -u
|
|
fi
|
|
|
|
if [ $? != 0 ]; then
|
|
echo "kexec: failed to unload kdump kernel"
|
|
return 1
|
|
fi
|
|
|
|
echo "kexec: unloaded kdump kernel"
|
|
return 0
|
|
}
|
|
|
|
stop()
|
|
{
|
|
if [ $DEFAULT_DUMP_MODE == "fadump" ]; then
|
|
stop_fadump
|
|
else
|
|
stop_kdump
|
|
fi
|
|
|
|
if [ $? != 0 ]; then
|
|
echo "Stopping kdump: [FAILED]"
|
|
return 1
|
|
fi
|
|
|
|
echo "Stopping kdump: [OK]"
|
|
return 0
|
|
}
|
|
|
|
if [ ! -f "$KDUMP_CONFIG_FILE" ]; then
|
|
echo "Error: No kdump config file found!" >&2
|
|
exit 1
|
|
fi
|
|
|
|
main ()
|
|
{
|
|
# Determine if the dump mode is kdump or fadump
|
|
determine_dump_mode
|
|
|
|
case "$1" in
|
|
start)
|
|
if [ -s /proc/vmcore ]; then
|
|
save_core
|
|
reboot
|
|
else
|
|
start
|
|
fi
|
|
;;
|
|
stop)
|
|
stop
|
|
;;
|
|
status)
|
|
EXIT_CODE=0
|
|
check_current_status
|
|
case "$?" in
|
|
0)
|
|
echo "Kdump is operational"
|
|
EXIT_CODE=0
|
|
;;
|
|
1)
|
|
echo "Kdump is not operational"
|
|
EXIT_CODE=3
|
|
;;
|
|
esac
|
|
exit $EXIT_CODE
|
|
;;
|
|
restart)
|
|
stop
|
|
start
|
|
;;
|
|
condrestart)
|
|
;;
|
|
propagate)
|
|
propagate_ssh_key
|
|
;;
|
|
*)
|
|
echo $"Usage: $0 {start|stop|status|restart|propagate}"
|
|
exit 1
|
|
esac
|
|
}
|
|
|
|
# Other kdumpctl instances will block in queue, until this one exits
|
|
single_instance_lock
|
|
|
|
# To avoid fd 9 leaking, we invoke a subshell, close fd 9 and call main.
|
|
# So that fd isn't leaking when main is invoking a subshell.
|
|
(exec 9<&-; main $1)
|
|
|
|
exit $?
|