96a3fc1ac8
Resolves: bz1924115
Conflict: None
Upstream: Fedora
commit fa9201b240 (devel)
Author: Hari Bathini <hbathini@linux.ibm.com>
Date: Wed Jun 23 20:06:48 2021 +0530
fadump: isolate fadump initramfs image within the default one
In case of fadump, the initramfs image has to be built to boot into
the production environment as well as to offload the active crash dump
to the specified dump target (for boot after crash). As the same image
would be used for both boot scenarios, it could not be built optimally
while accommodating both cases.
Use --include to include the initramfs image built for offloading
active crash dump to the specified dump target. Also, introduce a new
out-of-tree dracut module (99zz-fadumpinit) that installs a customized
init program while moving the default /init to /init.dracut. This
customized init program is leveraged to isolate fadump image within
the default initramfs image by kicking off default boot process
(exec /init.dracut) for regular boot scenario and activating fadump
initramfs image, if the system is booting after a crash.
If squash is available, ensure default initramfs image is also built
with squash module to reduce memory consumption in capture kernel.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
1081 lines
30 KiB
Bash
Executable File
1081 lines
30 KiB
Bash
Executable File
#!/bin/sh
|
|
#
|
|
# Kdump common variables and functions
|
|
#
|
|
|
|
DEFAULT_PATH="/var/crash/"
|
|
FENCE_KDUMP_CONFIG_FILE="/etc/sysconfig/fence_kdump"
|
|
FENCE_KDUMP_SEND="/usr/libexec/fence_kdump_send"
|
|
FADUMP_ENABLED_SYS_NODE="/sys/kernel/fadump_enabled"
|
|
|
|
is_fadump_capable()
|
|
{
|
|
# Check if firmware-assisted dump is enabled
|
|
# if no, fallback to kdump check
|
|
if [ -f $FADUMP_ENABLED_SYS_NODE ]; then
|
|
rc=`cat $FADUMP_ENABLED_SYS_NODE`
|
|
[ $rc -eq 1 ] && return 0
|
|
fi
|
|
return 1
|
|
}
|
|
|
|
is_squash_available() {
|
|
for kmodule in squashfs overlay loop; do
|
|
if [ -z "$KDUMP_KERNELVER" ]; then
|
|
modprobe --dry-run $kmodule &>/dev/null || return 1
|
|
else
|
|
modprobe -S $KDUMP_KERNELVER --dry-run $kmodule &>/dev/null || return 1
|
|
fi
|
|
done
|
|
}
|
|
|
|
perror_exit() {
|
|
derror "$@"
|
|
exit 1
|
|
}
|
|
|
|
is_fs_type_nfs()
|
|
{
|
|
[ "$1" = "nfs" ] || [ "$1" = "nfs4" ]
|
|
}
|
|
|
|
is_ssh_dump_target()
|
|
{
|
|
grep -q "^ssh[[:blank:]].*@" /etc/kdump.conf
|
|
}
|
|
|
|
is_nfs_dump_target()
|
|
{
|
|
if grep -q "^nfs" /etc/kdump.conf; then
|
|
return 0;
|
|
fi
|
|
|
|
if is_fs_type_nfs $(get_dracut_args_fstype "$(grep "^dracut_args .*\-\-mount" /etc/kdump.conf)"); then
|
|
return 0
|
|
fi
|
|
|
|
local _save_path=$(get_save_path)
|
|
local _target=$(get_target_from_path $_save_path)
|
|
local _fstype=$(get_fs_type_from_target $_target)
|
|
|
|
if is_fs_type_nfs $_fstype; then
|
|
return 0
|
|
fi
|
|
|
|
return 1
|
|
}
|
|
|
|
is_raw_dump_target()
|
|
{
|
|
grep -q "^raw" /etc/kdump.conf
|
|
}
|
|
|
|
is_fs_dump_target()
|
|
{
|
|
egrep -q "^ext[234]|^xfs|^btrfs|^minix" /etc/kdump.conf
|
|
}
|
|
|
|
strip_comments()
|
|
{
|
|
echo $@ | sed -e 's/\(.*\)#.*/\1/'
|
|
}
|
|
|
|
# Read from kdump config file stripping all comments
|
|
read_strip_comments()
|
|
{
|
|
# strip heading spaces, and print any content starting with
|
|
# neither space or #, and strip everything after #
|
|
sed -n -e "s/^\s*\([^# \t][^#]\+\).*/\1/gp" $1
|
|
}
|
|
|
|
# Check if fence kdump is configured in Pacemaker cluster
|
|
is_pcs_fence_kdump()
|
|
{
|
|
# no pcs or fence_kdump_send executables installed?
|
|
type -P pcs > /dev/null || return 1
|
|
[ -x $FENCE_KDUMP_SEND ] || return 1
|
|
|
|
# fence kdump not configured?
|
|
(pcs cluster cib | grep 'type="fence_kdump"') &> /dev/null || return 1
|
|
}
|
|
|
|
# Check if fence_kdump is configured using kdump options
|
|
is_generic_fence_kdump()
|
|
{
|
|
[ -x $FENCE_KDUMP_SEND ] || return 1
|
|
|
|
grep -q "^fence_kdump_nodes" /etc/kdump.conf
|
|
}
|
|
|
|
to_dev_name() {
|
|
local dev="${1//\"/}"
|
|
|
|
case "$dev" in
|
|
UUID=*)
|
|
dev=`blkid -U "${dev#UUID=}"`
|
|
;;
|
|
LABEL=*)
|
|
dev=`blkid -L "${dev#LABEL=}"`
|
|
;;
|
|
esac
|
|
echo $dev
|
|
}
|
|
|
|
is_user_configured_dump_target()
|
|
{
|
|
grep -E -q "^ext[234]|^xfs|^btrfs|^minix|^raw|^nfs|^ssh" /etc/kdump.conf || is_mount_in_dracut_args;
|
|
}
|
|
|
|
get_user_configured_dump_disk()
|
|
{
|
|
local _target
|
|
|
|
_target=$(egrep "^ext[234]|^xfs|^btrfs|^minix|^raw" /etc/kdump.conf 2>/dev/null |awk '{print $2}')
|
|
[ -n "$_target" ] && echo $_target && return
|
|
|
|
_target=$(get_dracut_args_target "$(grep "^dracut_args .*\-\-mount" /etc/kdump.conf)")
|
|
[ -b "$_target" ] && echo $_target
|
|
}
|
|
|
|
get_root_fs_device()
|
|
{
|
|
findmnt -k -f -n -o SOURCE /
|
|
}
|
|
|
|
get_save_path()
|
|
{
|
|
local _save_path=$(awk '$1 == "path" {print $2}' /etc/kdump.conf)
|
|
[ -z "$_save_path" ] && _save_path=$DEFAULT_PATH
|
|
|
|
# strip the duplicated "/"
|
|
echo $_save_path | tr -s /
|
|
}
|
|
|
|
get_block_dump_target()
|
|
{
|
|
local _target _path
|
|
|
|
if is_ssh_dump_target || is_nfs_dump_target; then
|
|
return
|
|
fi
|
|
|
|
_target=$(get_user_configured_dump_disk)
|
|
[ -n "$_target" ] && echo $(to_dev_name $_target) && return
|
|
|
|
# Get block device name from local save path
|
|
_path=$(get_save_path)
|
|
_target=$(get_target_from_path $_path)
|
|
[ -b "$_target" ] && echo $(to_dev_name $_target)
|
|
}
|
|
|
|
is_dump_to_rootfs()
|
|
{
|
|
grep -E "^(failure_action|default)[[:space:]]dump_to_rootfs" /etc/kdump.conf >/dev/null
|
|
}
|
|
|
|
get_failure_action_target()
|
|
{
|
|
local _target
|
|
|
|
if is_dump_to_rootfs; then
|
|
# Get rootfs device name
|
|
_target=$(get_root_fs_device)
|
|
[ -b "$_target" ] && echo $(to_dev_name $_target) && return
|
|
# Then, must be nfs root
|
|
echo "nfs"
|
|
fi
|
|
}
|
|
|
|
# Get kdump targets(including root in case of dump_to_rootfs).
|
|
get_kdump_targets()
|
|
{
|
|
local _target _root
|
|
local kdump_targets
|
|
|
|
_target=$(get_block_dump_target)
|
|
if [ -n "$_target" ]; then
|
|
kdump_targets=$_target
|
|
elif is_ssh_dump_target; then
|
|
kdump_targets="ssh"
|
|
else
|
|
kdump_targets="nfs"
|
|
fi
|
|
|
|
# Add the root device if dump_to_rootfs is specified.
|
|
_root=$(get_failure_action_target)
|
|
if [ -n "$_root" -a "$kdump_targets" != "$_root" ]; then
|
|
kdump_targets="$kdump_targets $_root"
|
|
fi
|
|
|
|
echo "$kdump_targets"
|
|
}
|
|
|
|
# Return the bind mount source path, return the path itself if it's not bind mounted
|
|
# Eg. if /path/to/src is bind mounted to /mnt/bind, then:
|
|
# /mnt/bind -> /path/to/src, /mnt/bind/dump -> /path/to/src/dump
|
|
#
|
|
# findmnt uses the option "-v, --nofsroot" to exclusive the [/dir]
|
|
# in the SOURCE column for bind-mounts, then if $_src equals to
|
|
# $_src_nofsroot, the mountpoint is not bind mounted directory.
|
|
#
|
|
# Below is just an example for mount info
|
|
# /dev/mapper/atomicos-root[/ostree/deploy/rhel-atomic-host/var], if the
|
|
# directory is bind mounted. The former part represents the device path, rest
|
|
# part is the bind mounted directory which quotes by bracket "[]".
|
|
get_bind_mount_source()
|
|
{
|
|
local _mnt=$(df $1 | tail -1 | awk '{print $NF}')
|
|
local _path=${1#$_mnt}
|
|
|
|
local _src=$(get_mount_info SOURCE target $_mnt -f)
|
|
local _opt=$(get_mount_info OPTIONS target $_mnt -f)
|
|
local _fstype=$(get_mount_info FSTYPE target $_mnt -f)
|
|
|
|
# bind mount in fstab
|
|
if [[ -d "$_src" ]] && [[ "$_fstype" = none ]] && (echo "$_opt" | grep -q "\bbind\b"); then
|
|
echo $_src$_path && return
|
|
fi
|
|
|
|
# direct mount
|
|
local _src_nofsroot=$(get_mount_info SOURCE target $_mnt -v -f)
|
|
if [[ $_src_nofsroot = $_src ]]; then
|
|
echo $_mnt$_path && return
|
|
fi
|
|
|
|
local _fsroot=${_src#$_src_nofsroot[}
|
|
_fsroot=${_fsroot%]}
|
|
_mnt=$(get_mount_info TARGET source $_src_nofsroot -f)
|
|
|
|
# for btrfs, _fsroot will also contain the subvol value as well, strip it
|
|
if [[ "$_fstype" = btrfs ]]; then
|
|
local _subvol
|
|
_subvol=${_opt#*subvol=}
|
|
_subvol=${_subvol%,*}
|
|
_fsroot=${_fsroot#$_subvol}
|
|
fi
|
|
echo $_mnt$_fsroot$_path
|
|
}
|
|
|
|
# Return the current underlaying device of a path, ignore bind mounts
|
|
get_target_from_path()
|
|
{
|
|
local _target
|
|
|
|
_target=$(df $1 2>/dev/null | tail -1 | awk '{print $1}')
|
|
[[ "$_target" == "/dev/root" ]] && [[ ! -e /dev/root ]] && _target=$(get_root_fs_device)
|
|
echo $_target
|
|
}
|
|
|
|
is_mounted()
|
|
{
|
|
findmnt -k -n $1 &>/dev/null
|
|
}
|
|
|
|
get_mount_info()
|
|
{
|
|
local _info_type=$1 _src_type=$2 _src=$3; shift 3
|
|
local _info=$(findmnt -k -n -r -o $_info_type --$_src_type $_src $@)
|
|
|
|
[ -z "$_info" ] && [ -e "/etc/fstab" ] && _info=$(findmnt -s -n -r -o $_info_type --$_src_type $_src $@)
|
|
|
|
echo $_info
|
|
}
|
|
|
|
get_fs_type_from_target()
|
|
{
|
|
get_mount_info FSTYPE source $1 -f
|
|
}
|
|
|
|
get_mntopt_from_target()
|
|
{
|
|
get_mount_info OPTIONS source $1 -f
|
|
}
|
|
# Find the general mount point of a dump target, not the bind mount point
|
|
get_mntpoint_from_target()
|
|
{
|
|
# Expcilitly specify --source to findmnt could ensure non-bind mount is returned
|
|
get_mount_info TARGET source $1 -f
|
|
}
|
|
|
|
# Get the path where the target will be mounted in kdump kernel
|
|
# $1: kdump target device
|
|
get_kdump_mntpoint_from_target()
|
|
{
|
|
local _mntpoint=$(get_mntpoint_from_target $1)
|
|
|
|
# mount under /sysroot if dump to root disk or mount under
|
|
# mount under /kdumproot if dump target is not mounted in first kernel
|
|
# mount under /kdumproot/$_mntpoint in other cases in 2nd kernel.
|
|
# systemd will be in charge to umount it.
|
|
if [ -z "$_mntpoint" ];then
|
|
_mntpoint="/kdumproot"
|
|
else
|
|
if [ "$_mntpoint" = "/" ];then
|
|
_mntpoint="/sysroot"
|
|
else
|
|
_mntpoint="/kdumproot/$_mntpoint"
|
|
fi
|
|
fi
|
|
|
|
# strip duplicated "/"
|
|
echo $_mntpoint | tr -s "/"
|
|
}
|
|
|
|
# get_option_value <option_name>
|
|
# retrieves value of option defined in kdump.conf
|
|
get_option_value() {
|
|
strip_comments `grep "^$1[[:space:]]\+" /etc/kdump.conf | tail -1 | cut -d\ -f2-`
|
|
}
|
|
|
|
kdump_get_persistent_dev() {
|
|
local dev="${1//\"/}"
|
|
|
|
case "$dev" in
|
|
UUID=*)
|
|
dev=`blkid -U "${dev#UUID=}"`
|
|
;;
|
|
LABEL=*)
|
|
dev=`blkid -L "${dev#LABEL=}"`
|
|
;;
|
|
esac
|
|
echo $(get_persistent_dev "$dev")
|
|
}
|
|
|
|
is_atomic()
|
|
{
|
|
grep -q "ostree" /proc/cmdline
|
|
}
|
|
|
|
is_ipv6_address()
|
|
{
|
|
echo $1 | grep -q ":"
|
|
}
|
|
|
|
# get ip address or hostname from nfs/ssh config value
|
|
get_remote_host()
|
|
{
|
|
local _config_val=$1
|
|
|
|
# ipv6 address in kdump.conf is around with "[]",
|
|
# factor out the ipv6 address
|
|
_config_val=${_config_val#*@}
|
|
_config_val=${_config_val%:/*}
|
|
_config_val=${_config_val#[}
|
|
_config_val=${_config_val%]}
|
|
echo $_config_val
|
|
}
|
|
|
|
is_hostname()
|
|
{
|
|
local _hostname=`echo $1 | grep ":"`
|
|
|
|
if [ -n "$_hostname" ]; then
|
|
return 1
|
|
fi
|
|
echo $1 | grep -q "[a-zA-Z]"
|
|
}
|
|
|
|
# Copied from "/etc/sysconfig/network-scripts/network-functions"
|
|
get_hwaddr()
|
|
{
|
|
if [ -f "/sys/class/net/${1}/address" ]; then
|
|
awk '{ print toupper($0) }' < /sys/class/net/${1}/address
|
|
elif [ -d "/sys/class/net/${1}" ]; then
|
|
LC_ALL= LANG= ip -o link show ${1} 2>/dev/null | \
|
|
awk '{ print toupper(gensub(/.*link\/[^ ]* ([[:alnum:]:]*).*/,
|
|
"\\1", 1)); }'
|
|
fi
|
|
}
|
|
|
|
|
|
# Get value by a field using "nmcli -g"
|
|
#
|
|
# "nmcli --get-values" allows us to retrive value(s) by field, for example,
|
|
# nmcli --get-values <field> connection show /org/freedesktop/NetworkManager/ActiveConnection/1
|
|
# returns the following value for the corresponding field respectively,
|
|
# Field Value
|
|
# IP4.DNS "10.19.42.41 | 10.11.5.19 | 10.5.30.160"
|
|
# 802-3-ethernet.s390-subchannels ""
|
|
# bond.options "mode=balance-rr"
|
|
get_nmcli_value_by_field()
|
|
{
|
|
local _nm_show_cmd=$1
|
|
local _field=$2
|
|
|
|
local val=$(LANG=C nmcli --get-values $_field $_nm_show_cmd)
|
|
|
|
echo -n "$val"
|
|
}
|
|
|
|
# Get nmcli connection apath (a D-Bus active connection path ) by ifname
|
|
#
|
|
# apath is used for nmcli connection operations, e.g.
|
|
# $ nmcli connection show $apath
|
|
get_nmcli_connection_apath_by_ifname()
|
|
{
|
|
local _ifname=$1
|
|
local _nm_show_cmd="device show $_ifname"
|
|
|
|
local _apath=$(get_nmcli_value_by_field "$_nm_show_cmd" "GENERAL.CON-PATH")
|
|
|
|
echo -n "$_apath"
|
|
}
|
|
|
|
# Get nmcli connection show cmd by ifname
|
|
#
|
|
# "$_apath" is supposed to not contain any chracter that
|
|
# need to be escapded, e.g. space. Otherwise get_nmcli_value_by_field
|
|
# would fail.
|
|
get_nmcli_connection_show_cmd_by_ifname()
|
|
{
|
|
local _ifname="$1"
|
|
local _apath=$(get_nmcli_connection_apath_by_ifname "$_ifname")
|
|
local _nm_show_cmd="connection show $_apath"
|
|
|
|
echo -n "$_nm_show_cmd"
|
|
}
|
|
|
|
get_ifcfg_by_device()
|
|
{
|
|
grep -E -i -l "^[[:space:]]*DEVICE=\"*${1}\"*[[:space:]]*$" \
|
|
/etc/sysconfig/network-scripts/ifcfg-* 2>/dev/null | head -1
|
|
}
|
|
|
|
get_ifcfg_by_hwaddr()
|
|
{
|
|
grep -E -i -l "^[[:space:]]*HWADDR=\"*${1}\"*[[:space:]]*$" \
|
|
/etc/sysconfig/network-scripts/ifcfg-* 2>/dev/null | head -1
|
|
}
|
|
|
|
get_ifcfg_by_uuid()
|
|
{
|
|
grep -E -i -l "^[[:space:]]*UUID=\"*${1}\"*[[:space:]]*$" \
|
|
/etc/sysconfig/network-scripts/ifcfg-* 2>/dev/null | head -1
|
|
}
|
|
|
|
get_ifcfg_by_name()
|
|
{
|
|
grep -E -i -l "^[[:space:]]*NAME=\"*${1}\"*[[:space:]]*$" \
|
|
/etc/sysconfig/network-scripts/ifcfg-* 2>/dev/null | head -1
|
|
}
|
|
|
|
is_nm_running()
|
|
{
|
|
[ "$(LANG=C nmcli -t --fields running general status 2>/dev/null)" = "running" ]
|
|
}
|
|
|
|
is_nm_handling()
|
|
{
|
|
LANG=C nmcli -t --fields device,state dev status 2>/dev/null \
|
|
| grep -q "^\(${1}:connected\)\|\(${1}:connecting.*\)$"
|
|
}
|
|
|
|
# $1: netdev name
|
|
get_ifcfg_nmcli()
|
|
{
|
|
local nm_uuid nm_name
|
|
local ifcfg_file
|
|
|
|
# Get the active nmcli config name of $1
|
|
if is_nm_running && is_nm_handling "${1}" ; then
|
|
# The configuration "uuid" and "name" generated by nm is wrote to
|
|
# the ifcfg file as "UUID=<nm_uuid>" and "NAME=<nm_name>".
|
|
nm_uuid=$(LANG=C nmcli -t --fields uuid,device c show --active 2>/dev/null \
|
|
| grep "${1}" | head -1 | cut -d':' -f1)
|
|
nm_name=$(LANG=C nmcli -t --fields name,device c show --active 2>/dev/null \
|
|
| grep "${1}" | head -1 | cut -d':' -f1)
|
|
ifcfg_file=$(get_ifcfg_by_uuid "${nm_uuid}")
|
|
[ -z "${ifcfg_file}" ] && ifcfg_file=$(get_ifcfg_by_name "${nm_name}")
|
|
fi
|
|
|
|
echo -n "${ifcfg_file}"
|
|
}
|
|
|
|
# $1: netdev name
|
|
get_ifcfg_legacy()
|
|
{
|
|
local ifcfg_file
|
|
|
|
ifcfg_file="/etc/sysconfig/network-scripts/ifcfg-${1}"
|
|
[ -f "${ifcfg_file}" ] && echo -n "${ifcfg_file}" && return
|
|
|
|
ifcfg_file=$(get_ifcfg_by_name "${1}")
|
|
[ -f "${ifcfg_file}" ] && echo -n "${ifcfg_file}" && return
|
|
|
|
local hwaddr=$(get_hwaddr "${1}")
|
|
if [ -n "$hwaddr" ]; then
|
|
ifcfg_file=$(get_ifcfg_by_hwaddr "${hwaddr}")
|
|
[ -f "${ifcfg_file}" ] && echo -n "${ifcfg_file}" && return
|
|
fi
|
|
|
|
ifcfg_file=$(get_ifcfg_by_device "${1}")
|
|
|
|
echo -n "${ifcfg_file}"
|
|
}
|
|
|
|
# $1: netdev name
|
|
# Return the ifcfg file whole name(including the path) of $1 if any.
|
|
get_ifcfg_filename() {
|
|
local ifcfg_file
|
|
|
|
ifcfg_file=$(get_ifcfg_nmcli "${1}")
|
|
if [ -z "${ifcfg_file}" ]; then
|
|
ifcfg_file=$(get_ifcfg_legacy "${1}")
|
|
fi
|
|
|
|
echo -n "${ifcfg_file}"
|
|
}
|
|
|
|
# returns 0 when omission of a module is desired in dracut_args
|
|
# returns 1 otherwise
|
|
is_dracut_mod_omitted() {
|
|
local dracut_args dracut_mod=$1
|
|
|
|
set -- $(grep "^dracut_args" /etc/kdump.conf)
|
|
while [ $# -gt 0 ]; do
|
|
case $1 in
|
|
-o|--omit)
|
|
[[ " ${2//[^[:alnum:]]/ } " == *" $dracut_mod "* ]] && return 0
|
|
esac
|
|
shift
|
|
done
|
|
|
|
return 1
|
|
}
|
|
|
|
is_wdt_active() {
|
|
local active
|
|
|
|
[ -d /sys/class/watchdog ] || return 1
|
|
for dir in /sys/class/watchdog/*; do
|
|
[ -f "$dir/state" ] || continue
|
|
active=$(< "$dir/state")
|
|
[ "$active" = "active" ] && return 0
|
|
done
|
|
return 1
|
|
}
|
|
|
|
# If "dracut_args" contains "--mount" information, use it
|
|
# directly without any check(users are expected to ensure
|
|
# its correctness).
|
|
is_mount_in_dracut_args()
|
|
{
|
|
grep -q "^dracut_args .*\-\-mount" /etc/kdump.conf
|
|
}
|
|
|
|
# If $1 contains dracut_args "--mount", return <filesystem type>
|
|
get_dracut_args_fstype()
|
|
{
|
|
echo $1 | grep "\-\-mount" | sed "s/.*--mount .\(.*\)/\1/" | cut -d' ' -f3
|
|
}
|
|
|
|
# If $1 contains dracut_args "--mount", return <device>
|
|
get_dracut_args_target()
|
|
{
|
|
echo $1 | grep "\-\-mount" | sed "s/.*--mount .\(.*\)/\1/" | cut -d' ' -f1
|
|
}
|
|
|
|
check_crash_mem_reserved()
|
|
{
|
|
local mem_reserved
|
|
|
|
mem_reserved=$(cat /sys/kernel/kexec_crash_size)
|
|
if [ $mem_reserved -eq 0 ]; then
|
|
derror "No memory reserved for crash kernel"
|
|
return 1
|
|
fi
|
|
|
|
return 0
|
|
}
|
|
|
|
check_kdump_feasibility()
|
|
{
|
|
if [ ! -e /sys/kernel/kexec_crash_loaded ]; then
|
|
derror "Kdump is not supported on this kernel"
|
|
return 1
|
|
fi
|
|
check_crash_mem_reserved
|
|
return $?
|
|
}
|
|
|
|
check_current_kdump_status()
|
|
{
|
|
if [ ! -f /sys/kernel/kexec_crash_loaded ];then
|
|
derror "Perhaps CONFIG_CRASH_DUMP is not enabled in kernel"
|
|
return 1
|
|
fi
|
|
|
|
rc=`cat /sys/kernel/kexec_crash_loaded`
|
|
if [ $rc == 1 ]; then
|
|
return 0
|
|
else
|
|
return 1
|
|
fi
|
|
}
|
|
|
|
# remove_cmdline_param <kernel cmdline> <param1> [<param2>] ... [<paramN>]
|
|
# Remove a list of kernel parameters from a given kernel cmdline and print the result.
|
|
# For each "arg" in the removing params list, "arg" and "arg=xxx" will be removed if exists.
|
|
remove_cmdline_param()
|
|
{
|
|
local cmdline=$1
|
|
shift
|
|
|
|
for arg in $@; do
|
|
cmdline=`echo $cmdline | \
|
|
sed -e "s/\b$arg=[^ ]*//g" \
|
|
-e "s/^$arg\b//g" \
|
|
-e "s/[[:space:]]$arg\b//g" \
|
|
-e "s/\s\+/ /g"`
|
|
done
|
|
echo $cmdline
|
|
}
|
|
|
|
#
|
|
# This function returns the "apicid" of the boot
|
|
# cpu (cpu 0) if present.
|
|
#
|
|
get_bootcpu_apicid()
|
|
{
|
|
awk ' \
|
|
BEGIN { CPU = "-1"; } \
|
|
$1=="processor" && $2==":" { CPU = $NF; } \
|
|
CPU=="0" && /^apicid/ { print $NF; } \
|
|
' \
|
|
/proc/cpuinfo
|
|
}
|
|
|
|
#
|
|
# append_cmdline <kernel cmdline> <parameter name> <parameter value>
|
|
# This function appends argument "$2=$3" to string ($1) if not already present.
|
|
#
|
|
append_cmdline()
|
|
{
|
|
local cmdline=$1
|
|
local newstr=${cmdline/$2/""}
|
|
|
|
# unchanged str implies argument wasn't there
|
|
if [ "$cmdline" == "$newstr" ]; then
|
|
cmdline="${cmdline} ${2}=${3}"
|
|
fi
|
|
|
|
echo $cmdline
|
|
}
|
|
|
|
# This function check iomem and determines if we have more than
|
|
# 4GB of ram available. Returns 1 if we do, 0 if we dont
|
|
need_64bit_headers()
|
|
{
|
|
return `tail -n 1 /proc/iomem | awk '{ split ($1, r, "-"); \
|
|
print (strtonum("0x" r[2]) > strtonum("0xffffffff")); }'`
|
|
}
|
|
|
|
# Check if secure boot is being enforced.
|
|
#
|
|
# Per Peter Jones, we need check efivar SecureBoot-$(the UUID) and
|
|
# SetupMode-$(the UUID), they are both 5 bytes binary data. The first four
|
|
# bytes are the attributes associated with the variable and can safely be
|
|
# ignored, the last bytes are one-byte true-or-false variables. If SecureBoot
|
|
# is 1 and SetupMode is 0, then secure boot is being enforced.
|
|
#
|
|
# Assume efivars is mounted at /sys/firmware/efi/efivars.
|
|
is_secure_boot_enforced()
|
|
{
|
|
local secure_boot_file setup_mode_file
|
|
local secure_boot_byte setup_mode_byte
|
|
|
|
# On powerpc, os-secureboot-enforcing DT property indicates whether secureboot
|
|
# is enforced. Return success, if it is found.
|
|
if [ -f /proc/device-tree/ibm,secureboot/os-secureboot-enforcing ]; then
|
|
return 0
|
|
fi
|
|
|
|
# Detect secure boot on x86 and arm64
|
|
secure_boot_file=$(find /sys/firmware/efi/efivars -name SecureBoot-* 2>/dev/null)
|
|
setup_mode_file=$(find /sys/firmware/efi/efivars -name SetupMode-* 2>/dev/null)
|
|
|
|
if [ -f "$secure_boot_file" ] && [ -f "$setup_mode_file" ]; then
|
|
secure_boot_byte=$(hexdump -v -e '/1 "%d\ "' $secure_boot_file|cut -d' ' -f 5)
|
|
setup_mode_byte=$(hexdump -v -e '/1 "%d\ "' $setup_mode_file|cut -d' ' -f 5)
|
|
|
|
if [ "$secure_boot_byte" = "1" ] && [ "$setup_mode_byte" = "0" ]; then
|
|
return 0
|
|
fi
|
|
fi
|
|
|
|
# Detect secure boot on s390x
|
|
if [[ -e "/sys/firmware/ipl/secure" && "$(cat /sys/firmware/ipl/secure)" == "1" ]]; then
|
|
return 0
|
|
fi
|
|
|
|
return 1
|
|
}
|
|
|
|
#
|
|
# prepare_kexec_args <kexec args>
|
|
# This function prepares kexec argument.
|
|
#
|
|
prepare_kexec_args()
|
|
{
|
|
local kexec_args=$1
|
|
local found_elf_args
|
|
|
|
ARCH=`uname -m`
|
|
if [ "$ARCH" == "i686" -o "$ARCH" == "i386" ]
|
|
then
|
|
need_64bit_headers
|
|
if [ $? == 1 ]
|
|
then
|
|
found_elf_args=`echo $kexec_args | grep elf32-core-headers`
|
|
if [ -n "$found_elf_args" ]
|
|
then
|
|
dwarn "Warning: elf32-core-headers overrides correct elf64 setting"
|
|
else
|
|
kexec_args="$kexec_args --elf64-core-headers"
|
|
fi
|
|
else
|
|
found_elf_args=`echo $kexec_args | grep elf64-core-headers`
|
|
if [ -z "$found_elf_args" ]
|
|
then
|
|
kexec_args="$kexec_args --elf32-core-headers"
|
|
fi
|
|
fi
|
|
fi
|
|
echo $kexec_args
|
|
}
|
|
|
|
#
|
|
# Detect initrd and kernel location, results are stored in global enviromental variables:
|
|
# KDUMP_BOOTDIR, KDUMP_KERNELVER, KDUMP_KERNEL, DEFAULT_INITRD, and KDUMP_INITRD
|
|
#
|
|
# Expectes KDUMP_BOOTDIR, KDUMP_IMG, KDUMP_IMG_EXT, KDUMP_KERNELVER to be loaded from config already
|
|
# and will prefer already set values so user can specify custom kernel/initramfs location
|
|
#
|
|
prepare_kdump_bootinfo()
|
|
{
|
|
local boot_imglist boot_dirlist boot_initrdlist curr_kver="$(uname -r)"
|
|
local machine_id
|
|
|
|
if [ -z "$KDUMP_KERNELVER" ]; then
|
|
KDUMP_KERNELVER="$(uname -r)"
|
|
fi
|
|
|
|
read machine_id < /etc/machine-id
|
|
boot_dirlist=${KDUMP_BOOTDIR:-"/boot /boot/efi /efi /"}
|
|
boot_imglist="$KDUMP_IMG-$KDUMP_KERNELVER$KDUMP_IMG_EXT $machine_id/$KDUMP_KERNELVER/$KDUMP_IMG"
|
|
|
|
# Use BOOT_IMAGE as reference if possible, strip the GRUB root device prefix in (hd0,gpt1) format
|
|
local boot_img="$(cat /proc/cmdline | sed "s/^BOOT_IMAGE=\((\S*)\)\?\(\S*\) .*/\2/")"
|
|
if [ -n "$boot_img" ]; then
|
|
boot_imglist="$boot_img $boot_imglist"
|
|
fi
|
|
|
|
for dir in $boot_dirlist; do
|
|
for img in $boot_imglist; do
|
|
if [ -f "$dir/$img" ]; then
|
|
KDUMP_KERNEL=$(echo $dir/$img | tr -s '/')
|
|
break 2
|
|
fi
|
|
done
|
|
done
|
|
|
|
if ! [ -e "$KDUMP_KERNEL" ]; then
|
|
derror "Failed to detect kdump kernel location"
|
|
return 1
|
|
fi
|
|
|
|
# Set KDUMP_BOOTDIR to where kernel image is stored
|
|
KDUMP_BOOTDIR=$(dirname $KDUMP_KERNEL)
|
|
|
|
# Default initrd should just stay aside of kernel image, try to find it in KDUMP_BOOTDIR
|
|
boot_initrdlist="initramfs-$KDUMP_KERNELVER.img initrd"
|
|
for initrd in $boot_initrdlist; do
|
|
if [ -f "$KDUMP_BOOTDIR/$initrd" ]; then
|
|
defaut_initrd_base="$initrd"
|
|
DEFAULT_INITRD="$KDUMP_BOOTDIR/$defaut_initrd_base"
|
|
break
|
|
fi
|
|
done
|
|
|
|
# Create kdump initrd basename from default initrd basename
|
|
# initramfs-5.7.9-200.fc32.x86_64.img => initramfs-5.7.9-200.fc32.x86_64kdump.img
|
|
# initrd => initrdkdump
|
|
if [[ -z "$defaut_initrd_base" ]]; then
|
|
kdump_initrd_base=initramfs-${KDUMP_KERNELVER}kdump.img
|
|
elif [[ $defaut_initrd_base == *.* ]]; then
|
|
kdump_initrd_base=${defaut_initrd_base%.*}kdump.${DEFAULT_INITRD##*.}
|
|
else
|
|
kdump_initrd_base=${defaut_initrd_base}kdump
|
|
fi
|
|
|
|
# Place kdump initrd in `/var/lib/kdump` if `KDUMP_BOOTDIR` not writable
|
|
if [[ ! -w "$KDUMP_BOOTDIR" ]];then
|
|
var_target_initrd_dir="/var/lib/kdump"
|
|
mkdir -p "$var_target_initrd_dir"
|
|
KDUMP_INITRD="$var_target_initrd_dir/$kdump_initrd_base"
|
|
else
|
|
KDUMP_INITRD="$KDUMP_BOOTDIR/$kdump_initrd_base"
|
|
fi
|
|
}
|
|
|
|
get_watchdog_drvs()
|
|
{
|
|
local _wdtdrvs _drv _dir
|
|
|
|
for _dir in /sys/class/watchdog/*; do
|
|
# device/modalias will return driver of this device
|
|
[[ -f "$_dir/device/modalias" ]] || continue
|
|
_drv=$(< "$_dir/device/modalias")
|
|
_drv=$(modprobe --set-version "$KDUMP_KERNELVER" -R $_drv 2>/dev/null)
|
|
for i in $_drv; do
|
|
if ! [[ " $_wdtdrvs " == *" $i "* ]]; then
|
|
_wdtdrvs="$_wdtdrvs $i"
|
|
fi
|
|
done
|
|
done
|
|
|
|
echo $_wdtdrvs
|
|
}
|
|
|
|
#
|
|
# prepare_cmdline <commandline> <commandline remove> <commandline append>
|
|
# This function performs a series of edits on the command line.
|
|
# Store the final result in global $KDUMP_COMMANDLINE.
|
|
prepare_cmdline()
|
|
{
|
|
local cmdline id
|
|
|
|
if [ -z "$1" ]; then
|
|
cmdline=$(cat /proc/cmdline)
|
|
else
|
|
cmdline="$1"
|
|
fi
|
|
|
|
# These params should always be removed
|
|
cmdline=$(remove_cmdline_param "$cmdline" crashkernel panic_on_warn)
|
|
# These params can be removed configurably
|
|
cmdline=$(remove_cmdline_param "$cmdline" "$2")
|
|
|
|
# Always remove "root=X", as we now explicitly generate all kinds
|
|
# of dump target mount information including root fs.
|
|
#
|
|
# We do this before KDUMP_COMMANDLINE_APPEND, if one really cares
|
|
# about it(e.g. for debug purpose), then can pass "root=X" using
|
|
# KDUMP_COMMANDLINE_APPEND.
|
|
cmdline=$(remove_cmdline_param "$cmdline" root)
|
|
|
|
# With the help of "--hostonly-cmdline", we can avoid some interitage.
|
|
cmdline=$(remove_cmdline_param "$cmdline" rd.lvm.lv rd.luks.uuid rd.dm.uuid rd.md.uuid fcoe)
|
|
|
|
# Remove netroot, rd.iscsi.initiator and iscsi_initiator since
|
|
# we get duplicate entries for the same in case iscsi code adds
|
|
# it as well.
|
|
cmdline=$(remove_cmdline_param "$cmdline" netroot rd.iscsi.initiator iscsi_initiator)
|
|
|
|
cmdline="${cmdline} $3"
|
|
|
|
id=$(get_bootcpu_apicid)
|
|
if [ ! -z ${id} ] ; then
|
|
cmdline=$(append_cmdline "${cmdline}" disable_cpu_apicid ${id})
|
|
fi
|
|
|
|
# If any watchdog is used, set it's pretimeout to 0. pretimeout let
|
|
# watchdog panic the kernel first, and reset the system after the
|
|
# panic. If the system is already in kdump, panic is not helpful
|
|
# and only increase the chance of watchdog failure.
|
|
for i in $(get_watchdog_drvs); do
|
|
cmdline+=" $i.pretimeout=0"
|
|
|
|
if [[ $i == hpwdt ]]; then
|
|
# hpwdt have a special parameter kdumptimeout, is's only suppose
|
|
# to be set to non-zero in first kernel. In kdump, non-zero
|
|
# value could prevent the watchdog from resetting the system.
|
|
cmdline+=" $i.kdumptimeout=0"
|
|
fi
|
|
done
|
|
|
|
echo ${cmdline}
|
|
}
|
|
|
|
#get system memory size in the unit of GB
|
|
get_system_size()
|
|
{
|
|
result=$(cat /proc/iomem | grep "System RAM" | awk -F ":" '{ print $1 }' | tr [:lower:] [:upper:] | paste -sd+)
|
|
result="+$result"
|
|
# replace '-' with '+0x' and '+' with '-0x'
|
|
sum=$( echo $result | sed -e 's/-/K0x/g' | sed -e 's/+/-0x/g' | sed -e 's/K/+/g' )
|
|
size=$(printf "%d\n" $(($sum)))
|
|
let size=$size/1024/1024/1024
|
|
|
|
echo $size
|
|
}
|
|
|
|
get_recommend_size()
|
|
{
|
|
local mem_size=$1
|
|
local _ck_cmdline=$2
|
|
local OLDIFS="$IFS"
|
|
|
|
last_sz=""
|
|
last_unit=""
|
|
|
|
start=${_ck_cmdline: :1}
|
|
if [ $mem_size -lt $start ]; then
|
|
echo "0M"
|
|
return
|
|
fi
|
|
IFS=','
|
|
for i in $_ck_cmdline; do
|
|
end=$(echo $i | awk -F "-" '{ print $2 }' | awk -F ":" '{ print $1 }')
|
|
recommend=$(echo $i | awk -F "-" '{ print $2 }' | awk -F ":" '{ print $2 }')
|
|
size=${end: : -1}
|
|
unit=${end: -1}
|
|
if [ $unit == 'T' ]; then
|
|
let size=$size*1024
|
|
fi
|
|
if [ $mem_size -lt $size ]; then
|
|
echo $recommend
|
|
IFS="$OLDIFS"
|
|
return
|
|
fi
|
|
done
|
|
IFS="$OLDIFS"
|
|
}
|
|
|
|
# return recommended size based on current system RAM size
|
|
kdump_get_arch_recommend_size()
|
|
{
|
|
if ! [[ -r "/proc/iomem" ]] ; then
|
|
echo "Error, can not access /proc/iomem."
|
|
return 1
|
|
fi
|
|
arch=$(lscpu | grep Architecture | awk -F ":" '{ print $2 }' | tr [:lower:] [:upper:])
|
|
|
|
if [ $arch == "X86_64" ] || [ $arch == "S390X" ]; then
|
|
ck_cmdline="1G-4G:160M,4G-64G:192M,64G-1T:256M,1T-:512M"
|
|
elif [ $arch == "AARCH64" ]; then
|
|
ck_cmdline="2G-:448M"
|
|
elif [ $arch == "PPC64LE" ]; then
|
|
if is_fadump_capable; then
|
|
ck_cmdline="4G-16G:768M,16G-64G:1G,64G-128G:2G,128G-1T:4G,1T-2T:6G,2T-4T:12G,4T-8T:20G,8T-16T:36G,16T-32T:64G,32T-64T:128G,64T-:180G"
|
|
else
|
|
ck_cmdline="2G-4G:384M,4G-16G:512M,16G-64G:1G,64G-128G:2G,128G-:4G"
|
|
fi
|
|
fi
|
|
|
|
ck_cmdline=$(echo $ck_cmdline | sed -e 's/-:/-102400T:/g')
|
|
sys_mem=$(get_system_size)
|
|
result=$(get_recommend_size $sys_mem "$ck_cmdline")
|
|
echo $result
|
|
return 0
|
|
}
|
|
|
|
# Print all underlying crypt devices of a block device
|
|
# print nothing if device is not on top of a crypt device
|
|
# $1: the block device to be checked in maj:min format
|
|
get_luks_crypt_dev()
|
|
{
|
|
[[ -b /dev/block/$1 ]] || return 1
|
|
|
|
local _type=$(eval "$(blkid -u filesystem,crypto -o export -- /dev/block/$1); echo \$TYPE")
|
|
[[ $_type == "crypto_LUKS" ]] && echo $1
|
|
|
|
for _x in /sys/dev/block/$1/slaves/*; do
|
|
[[ -f $_x/dev ]] || continue
|
|
[[ $_x/subsystem -ef /sys/class/block ]] || continue
|
|
get_luks_crypt_dev "$(< "$_x/dev")"
|
|
done
|
|
}
|
|
|
|
# kdump_get_maj_min <device>
|
|
# Prints the major and minor of a device node.
|
|
# Example:
|
|
# $ get_maj_min /dev/sda2
|
|
# 8:2
|
|
kdump_get_maj_min() {
|
|
local _majmin
|
|
_majmin="$(stat -L -c '%t:%T' "$1" 2> /dev/null)"
|
|
printf "%s" "$((0x${_majmin%:*})):$((0x${_majmin#*:}))"
|
|
}
|
|
|
|
get_all_kdump_crypt_dev()
|
|
{
|
|
local _dev _crypt
|
|
|
|
for _dev in $(get_block_dump_target); do
|
|
_crypt=$(get_luks_crypt_dev $(kdump_get_maj_min "$_dev"))
|
|
[[ -n "$_crypt" ]] && echo $_crypt
|
|
done
|
|
}
|
|
|
|
check_vmlinux()
|
|
{
|
|
# Use readelf to check if it's a valid ELF
|
|
readelf -h $1 &>/dev/null || return 1
|
|
}
|
|
|
|
get_vmlinux_size()
|
|
{
|
|
local size=0
|
|
|
|
while read _type _offset _virtaddr _physaddr _fsize _msize _flg _aln; do
|
|
size=$(( $size + $_msize ))
|
|
done <<< $(readelf -l -W $1 | grep "^ LOAD" 2>/dev/stderr)
|
|
|
|
echo $size
|
|
}
|
|
|
|
try_decompress()
|
|
{
|
|
# The obscure use of the "tr" filter is to work around older versions of
|
|
# "grep" that report the byte offset of the line instead of the pattern.
|
|
|
|
# Try to find the header ($1) and decompress from here
|
|
for pos in `tr "$1\n$2" "\n$2=" < "$4" | grep -abo "^$2"`
|
|
do
|
|
if ! type -P $3 > /dev/null; then
|
|
ddebug "Signiature detected but '$3' is missing, skip this decompressor"
|
|
break
|
|
fi
|
|
|
|
pos=${pos%%:*}
|
|
tail -c+$pos "$img" | $3 > $5 2> /dev/null
|
|
if check_vmlinux $5; then
|
|
ddebug "Kernel is extracted with '$3'"
|
|
return 0
|
|
fi
|
|
done
|
|
|
|
return 1
|
|
}
|
|
|
|
# Borrowed from linux/scripts/extract-vmlinux
|
|
get_kernel_size()
|
|
{
|
|
# Prepare temp files:
|
|
local img=$1 tmp=$(mktemp /tmp/vmlinux-XXX)
|
|
trap "rm -f $tmp" 0
|
|
|
|
# Try to check if it's a vmlinux already
|
|
check_vmlinux $img && get_vmlinux_size $img && return 0
|
|
|
|
# That didn't work, so retry after decompression.
|
|
try_decompress '\037\213\010' xy gunzip $img $tmp || \
|
|
try_decompress '\3757zXZ\000' abcde unxz $img $tmp || \
|
|
try_decompress 'BZh' xy bunzip2 $img $tmp || \
|
|
try_decompress '\135\0\0\0' xxx unlzma $img $tmp || \
|
|
try_decompress '\211\114\132' xy 'lzop -d' $img $tmp || \
|
|
try_decompress '\002!L\030' xxx 'lz4 -d' $img $tmp || \
|
|
try_decompress '(\265/\375' xxx unzstd $img $tmp
|
|
|
|
# Finally check for uncompressed images or objects:
|
|
[[ $? -eq 0 ]] && get_vmlinux_size $tmp && return 0
|
|
|
|
# Fallback to use iomem
|
|
local _size=0
|
|
for _seg in $(cat /proc/iomem | grep -E "Kernel (code|rodata|data|bss)" | cut -d ":" -f 1); do
|
|
_size=$(( $_size + 0x${_seg#*-} - 0x${_seg%-*} ))
|
|
done
|
|
echo $_size
|
|
}
|