#!/bin/sh # # The main kdump routine in capture kernel, bash may not be the # default shell. Any code added must be POSIX compliant. . /lib/dracut-lib.sh . /lib/kdump-logger.sh . /lib/kdump-lib-initramfs.sh #initiate the kdump logger if ! dlog_init; then echo "failed to initiate the kdump logger." exit 1 fi KDUMP_PATH="/var/crash" KDUMP_LOG_FILE="/run/initramfs/kexec-dmesg.log" KDUMP_LOG_DEST="" KDUMP_LOG_OP="" CORE_COLLECTOR="" DEFAULT_CORE_COLLECTOR="makedumpfile -l --message-level 7 -d 31" DMESG_COLLECTOR="/sbin/vmcore-dmesg" FAILURE_ACTION="systemctl reboot -f" DATEDIR=$(date +%Y-%m-%d-%T) HOST_IP='127.0.0.1' DUMP_INSTRUCTION="" SSH_KEY_LOCATION=$DEFAULT_SSHKEY DD_BLKSIZE=512 FINAL_ACTION="systemctl reboot -f" KDUMP_PRE="" KDUMP_POST="" NEWROOT="/sysroot" OPALCORE="/sys/firmware/opal/mpipl/core" KDUMP_CONF_PARSED="/tmp/kdump.conf.$$" # POSIX doesn't have pipefail, only apply when using bash # shellcheck disable=SC3040 [ -n "$BASH" ] && set -o pipefail DUMP_RETVAL=0 kdump_read_conf > $KDUMP_CONF_PARSED get_kdump_confs() { while read -r config_opt config_val; do # remove inline comments after the end of a directive. case "$config_opt" in path) KDUMP_PATH="$config_val" ;; core_collector) [ -n "$config_val" ] && CORE_COLLECTOR="$config_val" ;; sshkey) if [ -f "$config_val" ]; then SSH_KEY_LOCATION=$config_val fi ;; kdump_pre) KDUMP_PRE="$config_val" ;; kdump_post) KDUMP_POST="$config_val" ;; fence_kdump_args) FENCE_KDUMP_ARGS="$config_val" ;; fence_kdump_nodes) FENCE_KDUMP_NODES="$config_val" ;; failure_action | default) case $config_val in shell) FAILURE_ACTION="kdump_emergency_shell" ;; reboot) FAILURE_ACTION="systemctl reboot -f && exit" ;; halt) FAILURE_ACTION="halt && exit" ;; poweroff) FAILURE_ACTION="systemctl poweroff -f && exit" ;; dump_to_rootfs) FAILURE_ACTION="dump_to_rootfs" ;; esac ;; final_action) case $config_val in reboot) FINAL_ACTION="systemctl reboot -f" ;; halt) FINAL_ACTION="halt" ;; poweroff) FINAL_ACTION="systemctl poweroff -f" ;; esac ;; esac done < "$KDUMP_CONF_PARSED" if [ -z "$CORE_COLLECTOR" ]; then CORE_COLLECTOR="$DEFAULT_CORE_COLLECTOR" if is_ssh_dump_target || is_raw_dump_target; then CORE_COLLECTOR="$CORE_COLLECTOR -F" fi fi } # store the kexec kernel log to a file. save_log() { # LOG_OP is empty when log can't be saved, eg. raw target [ -n "$KDUMP_LOG_OP" ] || return dmesg -T > $KDUMP_LOG_FILE if command -v journalctl > /dev/null; then journalctl -ab >> $KDUMP_LOG_FILE fi chmod 600 $KDUMP_LOG_FILE dinfo "saving the $KDUMP_LOG_FILE to $KDUMP_LOG_DEST/" eval "$KDUMP_LOG_OP" } # $1: dump path, must be a mount point dump_fs() { ddebug "dump_fs _mp=$1" if ! is_mounted "$1"; then dinfo "dump path '$1' is not mounted, trying to mount..." if ! mount --target "$1"; then derror "failed to dump to '$1', it's not a mount point!" return 1 fi fi # Remove -F in makedumpfile case. We don't want a flat format dump here. case $CORE_COLLECTOR in *makedumpfile*) CORE_COLLECTOR=$(echo "$CORE_COLLECTOR" | sed -e "s/-F//g") ;; esac _dump_fs_path=$(echo "$1/$KDUMP_PATH/$HOST_IP-$DATEDIR/" | tr -s /) dinfo "saving to $_dump_fs_path" # Only remount to read-write mode if the dump target is mounted read-only. _dump_mnt_op=$(get_mount_info OPTIONS target "$1" -f) case $_dump_mnt_op in ro*) dinfo "Remounting the dump target in rw mode." mount -o remount,rw "$1" || return 1 ;; esac mkdir -p "$_dump_fs_path" || return 1 save_vmcore_dmesg_fs ${DMESG_COLLECTOR} "$_dump_fs_path" save_opalcore_fs "$_dump_fs_path" dinfo "saving vmcore" KDUMP_LOG_DEST=$_dump_fs_path/ KDUMP_LOG_OP="mv '$KDUMP_LOG_FILE' '$KDUMP_LOG_DEST/'" $CORE_COLLECTOR /proc/vmcore "$_dump_fs_path/vmcore-incomplete" _dump_exitcode=$? if [ $_dump_exitcode -eq 0 ]; then mv "$_dump_fs_path/vmcore-incomplete" "$_dump_fs_path/vmcore" sync dinfo "saving vmcore complete" else derror "saving vmcore failed, exitcode:$_dump_exitcode" return 1 fi # improper kernel cmdline can cause the failure of echo, we can ignore this kind of failure return 0 } # $1: dmesg collector # $2: dump path save_vmcore_dmesg_fs() { dinfo "saving vmcore-dmesg.txt to $2" if $1 /proc/vmcore > "$2/vmcore-dmesg-incomplete.txt"; then mv "$2/vmcore-dmesg-incomplete.txt" "$2/vmcore-dmesg.txt" chmod 600 "$2/vmcore-dmesg.txt" # Make sure file is on disk. There have been instances where later # saving vmcore failed and system rebooted without sync and there # was no vmcore-dmesg.txt available. sync dinfo "saving vmcore-dmesg.txt complete" else if [ -f "$2/vmcore-dmesg-incomplete.txt" ]; then chmod 600 "$2/vmcore-dmesg-incomplete.txt" fi derror "saving vmcore-dmesg.txt failed" fi } # $1: dump path save_opalcore_fs() { if [ ! -f $OPALCORE ]; then # Check if we are on an old kernel that uses a different path if [ -f /sys/firmware/opal/core ]; then OPALCORE="/sys/firmware/opal/core" else return 0 fi fi dinfo "saving opalcore:$OPALCORE to $1/opalcore" if ! cp $OPALCORE "$1/opalcore"; then derror "saving opalcore failed" return 1 fi sync dinfo "saving opalcore complete" return 0 } dump_to_rootfs() { if [ "$(systemctl status dracut-initqueue | sed -n "s/^\s*Active: \(\S*\)\s.*$/\1/p")" = "inactive" ]; then dinfo "Trying to bring up initqueue for rootfs mount" systemctl start dracut-initqueue fi dinfo "Clean up dead systemd services" systemctl cancel dinfo "Waiting for rootfs mount, will timeout after 90 seconds" systemctl start --no-block sysroot.mount _loop=0 while [ $_loop -lt 90 ] && ! is_mounted /sysroot; do sleep 1 _loop=$((_loop + 1)) done if ! is_mounted /sysroot; then derror "Failed to mount rootfs" return fi ddebug "NEWROOT=$NEWROOT" dump_fs $NEWROOT } kdump_emergency_shell() { ddebug "Switching to kdump emergency shell..." [ -f /etc/profile ] && . /etc/profile export PS1='kdump:${PWD}# ' . /lib/dracut-lib.sh if [ -f /dracut-state.sh ]; then . /dracut-state.sh 2> /dev/null fi source_conf /etc/conf.d type plymouth > /dev/null 2>&1 && plymouth quit source_hook "emergency" while read -r _tty rest; do ( echo echo echo 'Entering kdump emergency mode.' echo 'Type "journalctl" to view system logs.' echo 'Type "rdsosreport" to generate a sosreport, you can then' echo 'save it elsewhere and attach it to a bug report.' echo echo ) > "/dev/$_tty" done < /proc/consoles sh -i -l /bin/rm -f -- /.console_lock } do_failure_action() { dinfo "Executing failure action $FAILURE_ACTION" eval $FAILURE_ACTION } do_final_action() { dinfo "Executing final action $FINAL_ACTION" eval $FINAL_ACTION } do_dump() { eval $DUMP_INSTRUCTION _ret=$? if [ $_ret -ne 0 ]; then derror "saving vmcore failed" fi return $_ret } do_kdump_pre() { if [ -n "$KDUMP_PRE" ]; then "$KDUMP_PRE" _ret=$? if [ $_ret -ne 0 ]; then derror "$KDUMP_PRE exited with $_ret status" return $_ret fi fi # if any script fails, it just raises warning and continues if [ -d /etc/kdump/pre.d ]; then for file in /etc/kdump/pre.d/*; do "$file" _ret=$? if [ $_ret -ne 0 ]; then derror "$file exited with $_ret status" fi done fi return 0 } do_kdump_post() { if [ -d /etc/kdump/post.d ]; then for file in /etc/kdump/post.d/*; do "$file" "$1" _ret=$? if [ $_ret -ne 0 ]; then derror "$file exited with $_ret status" fi done fi if [ -n "$KDUMP_POST" ]; then "$KDUMP_POST" "$1" _ret=$? if [ $_ret -ne 0 ]; then derror "$KDUMP_POST exited with $_ret status" fi fi } # $1: block target, eg. /dev/sda dump_raw() { [ -b "$1" ] || return 1 dinfo "saving to raw disk $1" if ! echo "$CORE_COLLECTOR" | grep -q makedumpfile; then _src_size=$(stat --format %s /proc/vmcore) _src_size_mb=$((_src_size / 1048576)) /kdumpscripts/monitor_dd_progress $_src_size_mb & fi dinfo "saving vmcore" $CORE_COLLECTOR /proc/vmcore | dd of="$1" bs=$DD_BLKSIZE >> /tmp/dd_progress_file 2>&1 || return 1 sync dinfo "saving vmcore complete" return 0 } # $1: ssh key file # $2: ssh address in @ format dump_ssh() { _ret=0 _ssh_opt="-i $1 -o BatchMode=yes -o StrictHostKeyChecking=yes" _ssh_dir="$KDUMP_PATH/$HOST_IP-$DATEDIR" if is_ipv6_address "$2"; then _scp_address=${2%@*}@"[${2#*@}]" else _scp_address=$2 fi dinfo "saving to $2:$_ssh_dir" cat /var/lib/random-seed > /dev/urandom ssh -q $_ssh_opt "$2" mkdir -p "$_ssh_dir" || return 1 save_vmcore_dmesg_ssh "$DMESG_COLLECTOR" "$_ssh_dir" "$_ssh_opt" "$2" dinfo "saving vmcore" KDUMP_LOG_DEST=$2:$_ssh_dir/ KDUMP_LOG_OP="scp -q $_ssh_opt '$KDUMP_LOG_FILE' '$_scp_address:$_ssh_dir/'" save_opalcore_ssh "$_ssh_dir" "$_ssh_opt" "$2" "$_scp_address" if [ "${CORE_COLLECTOR%%[[:blank:]]*}" = "scp" ]; then scp -q $_ssh_opt /proc/vmcore "$_scp_address:$_ssh_dir/vmcore-incomplete" _ret=$? _vmcore="vmcore" else $CORE_COLLECTOR /proc/vmcore | ssh $_ssh_opt "$2" "umask 0077 && dd bs=512 of='$_ssh_dir/vmcore-incomplete'" _ret=$? _vmcore="vmcore.flat" fi if [ $_ret -eq 0 ]; then ssh $_ssh_opt "$2" "mv '$_ssh_dir/vmcore-incomplete' '$_ssh_dir/$_vmcore'" _ret=$? if [ $_ret -ne 0 ]; then derror "moving vmcore failed, exitcode:$_ret" else dinfo "saving vmcore complete" fi else derror "saving vmcore failed, exitcode:$_ret" fi return $_ret } # $1: dump path # $2: ssh opts # $3: ssh address in @ format # $4: scp address, similar with ssh address but IPv6 addresses are quoted save_opalcore_ssh() { if [ ! -f $OPALCORE ]; then # Check if we are on an old kernel that uses a different path if [ -f /sys/firmware/opal/core ]; then OPALCORE="/sys/firmware/opal/core" else return 0 fi fi dinfo "saving opalcore:$OPALCORE to $3:$1" if ! scp $2 $OPALCORE "$4:$1/opalcore-incomplete"; then derror "saving opalcore failed" return 1 fi ssh $2 "$3" mv "$1/opalcore-incomplete" "$1/opalcore" dinfo "saving opalcore complete" return 0 } # $1: dmesg collector # $2: dump path # $3: ssh opts # $4: ssh address in @ format save_vmcore_dmesg_ssh() { dinfo "saving vmcore-dmesg.txt to $4:$2" if $1 /proc/vmcore | ssh $3 "$4" "umask 0077 && dd of='$2/vmcore-dmesg-incomplete.txt'"; then ssh -q $3 "$4" mv "$2/vmcore-dmesg-incomplete.txt" "$2/vmcore-dmesg.txt" dinfo "saving vmcore-dmesg.txt complete" else derror "saving vmcore-dmesg.txt failed" fi } get_host_ip() { if is_nfs_dump_target || is_ssh_dump_target; then kdumpnic=$(getarg kdumpnic=) if [ -z "$kdumpnic" ]; then derror "failed to get kdumpnic!" return 1 fi if ! kdumphost=$(ip addr show dev "$kdumpnic" | grep '[ ]*inet'); then derror "wrong kdumpnic: $kdumpnic" return 1 fi kdumphost=$(echo "$kdumphost" | head -n 1 | awk '{print $2}') kdumphost="${kdumphost%%/*}" if [ -z "$kdumphost" ]; then derror "wrong kdumpnic: $kdumpnic" return 1 fi HOST_IP=$kdumphost fi return 0 } read_kdump_confs() { if [ ! -f "$KDUMP_CONFIG_FILE" ]; then derror "$KDUMP_CONFIG_FILE not found" return fi get_kdump_confs # rescan for add code for dump target while read -r config_opt config_val; do # remove inline comments after the end of a directive. case "$config_opt" in dracut_args) config_val=$(get_dracut_args_target "$config_val") if [ -n "$config_val" ]; then config_val=$(get_mntpoint_from_target "$config_val") DUMP_INSTRUCTION="dump_fs $config_val" fi ;; ext[234] | xfs | btrfs | minix | nfs) config_val=$(get_mntpoint_from_target "$config_val") DUMP_INSTRUCTION="dump_fs $config_val" ;; raw) DUMP_INSTRUCTION="dump_raw $config_val" ;; ssh) DUMP_INSTRUCTION="dump_ssh $SSH_KEY_LOCATION $config_val" ;; esac done < "$KDUMP_CONF_PARSED" } fence_kdump_notify() { if [ -n "$FENCE_KDUMP_NODES" ]; then # shellcheck disable=SC2086 $FENCE_KDUMP_SEND $FENCE_KDUMP_ARGS $FENCE_KDUMP_NODES & fi } if [ "$1" = "--error-handler" ]; then get_kdump_confs do_failure_action do_final_action exit $? fi # continue here only if we have to save dump. if [ -f /etc/fadump.initramfs ] && [ ! -f /proc/device-tree/rtas/ibm,kernel-dump ] && [ ! -f /proc/device-tree/ibm,opal/dump/mpipl-boot ]; then exit 0 fi read_kdump_confs fence_kdump_notify if ! get_host_ip; then derror "get_host_ip exited with non-zero status!" exit 1 fi if [ -z "$DUMP_INSTRUCTION" ]; then DUMP_INSTRUCTION="dump_fs $NEWROOT" fi if ! do_kdump_pre; then derror "kdump_pre script exited with non-zero status!" do_final_action # During systemd service to reboot the machine, stop this shell script running exit 1 fi make_trace_mem "kdump saving vmcore" '1:shortmem' '2+:mem' '3+:slab' do_dump DUMP_RETVAL=$? if ! do_kdump_post $DUMP_RETVAL; then derror "kdump_post script exited with non-zero status!" fi save_log if [ $DUMP_RETVAL -ne 0 ]; then exit 1 fi do_final_action