Kdump always use _proto=dhcp for both ipv4 and ipv6. But for ipv6
the dhcp address assignment is not like ipv4, there are different ways
for it, stateless and stateful, see below document:
https://fedoraproject.org/wiki/IPv6Guide
In case stateless, kernel can do the address assignment, dracut use
_proto=auto6; for stateful case, dracut use _proto=dhcp6.
But it is hard to decide whether stateless or stateful takes effect,
hence, dracut introduces ip=either6 option, which can try both of these
method automatically for us. For detail, refer to dracut:
commit 67354ee 40network: introduce ip=either6 option
We do not see bug reports before because for the most auto6 cases
kernel assign ip address before dhclient, kdump just happened to work.
Signed-off-by: Pingfan Liu <piliu@redhat.com>
When using fence_kdump, module-setup will create a kdump.conf with
fence_kdump_nodes. The node name comes from the cluster xml, which may
use the hostname alias. Later in kdump stage, "fence_kdump_send alias_1
alias_2" sends out notification to peers. Hence it requires /etc/hosts
and nsswitch.conf to make alias work.
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Kdump service starts too late, so early crashes will have no chance
to get kdump kernel booting, this will cause crash information to be
lost. It is necessary to add a dracut module in order to load crash
kernel and initramfs as early as possible. You can provide "rd.early
kdump" in grub commandline to enable, then the early kdump will load
those files like the normal kdump, which is disabled by default.
For the normal kdump service, it can check whether the early kdump
has loaded the crash kernel and initramfs. It has no conflict with
the early kdump.
If you rebuild the new initramfs for early kdump, the new initramfs
size will become large, because it will put the vmlinuz and kdump
initramfs into the new initramfs.
In addition, early kdump doesn't support fadump.
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Reviewed-by: Kazuhito Hagio <khagio@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
we move some common functions from kdumpctl to kdump-lib.sh, the
functions could be used in other modules, such as early kdump.
It has no bad effect.
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Reviewed-by: Kazuhito Hagio <khagio@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
port from rhel, original patch is contributed by Minfei Huang:
Using /sys to determines crashkernel actual size is confusing since
there is no unit of measure.
Add a new command "kdumpctl showmem" to show the reserved memory kindly.
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Signed-off-by: Minfei Huang <mhuang@redhat.com>
Acked-by: Bhupesh Sharma <bhsharma@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
This reverts commit 2f4149f276.
It is not proved to be right to get auto6 or dhcpv6 in 1st kernel,
pingfan is working on a dracut fix to do some fallback in 2nd kernel initramfs.
So revert this commit
For ppc64(le), the default behavior of kexec always copy "root=" param,
but if dump target is ssh, there will no tools installed in kdump
rd, which help to mount root. As a result, kdump service will fail to
start. So explicitly disable the default behavior with --dt_no_old_root
option.
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
When core_collector is changed, the kdump initramfs needs to
be rebuilt before it is loaded.
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Kdump always use _proto=dhcp for both ipv4 and ipv6. But for ipv6
the dhcp address assignment is not like ipv4, there are different ways
for it, stateless and stateful, see below document:
https://fedoraproject.org/wiki/IPv6Guide
In case stateless, kernel can do the address assignment, dracut use
_proto=auto6; for stateful case, dracut use _proto=dhcp6.
We do not see bug reports before because for the most auto6 cases
kernel assign ip address before dhclient, kdump just happened to work.
Here we use auto6 if possible first. And we take the assumption that
host use auto6 if /proc/sys/net/ipv6/conf/$netdev/autoconf is enabled
Signed-off-by: Pingfan Liu <piliu@redhat.com>
When using "dracut_args --mount" to specify dump target, e.g. nfs like:
path /
core_collector makedumpfile -d 31
dracut_args --mount "host:/path /var/crash nfs defaults"
kdump service should neither guarantees the correctness, nor relabels it.
For current code, since dracut_args dump targets are likely not mounted
so kdump service mistakenly relabel the rootfs, which is meanless and
takes very long time.
Signed-off-by: Pingfan Liu <piliu@redhat.com>
This reverts commit 2040103bd7.
Reason is it's based on the environment of 1st kernel where all
present devices could be active and initialized during bootup.
Then all pci devices will request irqs. While kdump only brings
up those devices which are necessary for vmcore dumping. So this
commit is not meaningful and helpless to very large extent. And
it will print out 'Warning' when calculated result is larger than
1 cpu, actually it's a false positive report most of the time.
So revert the commit, and can check the git history for later
reference.
[dyoung]: on some machine this warning message shows up but
later we found the irq numbers with and without nr_cpus=1 is
quite different so this need more investigation since
the formula is not accurate.
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Due to the following commit in dracut, which splits out hostonly modules
commit 5ce7cc7337a4c769b223152c083914f2052aa348
Author: Harald Hoyer <harald@redhat.com>
Date: Mon Jul 10 13:28:40 2017 +0200
add 90multipath-hostonly module
hardcoding the wwid of the drives in the initramfs causes problems
when the drives are cloned to a system with the same hardware, but
different disk wwid's
https://bugzilla.redhat.com/show_bug.cgi?id=1457311
So kdump should decide whether to include the hostonly module.
The multipath-hostonly can help kdump to include only the needed mpath device,
in order to use less memory by 2nd kernel.
---- The performance -----
before this patch
[root@localhost ~]# time kdumpctl start
Detected change(s) in the following file(s):
/etc/kdump.conf
Rebuilding /boot/initramfs-4.13.9-300.fc27.x86_64kdump.img
kexec: loaded kdump kernel
Starting kdump: [OK]
real 0m12.485s
user 0m10.096s
sys 0m1.887s
after this patch
root@localhost ~]# time kdumpctl start
Detected change(s) in the following file(s):
/etc/kdump.conf
Rebuilding /boot/initramfs-4.13.9-300.fc27.x86_64kdump.img
kexec: loaded kdump kernel
Starting kdump: [OK]
real 0m15.839s
user 0m13.015s
sys 0m1.853s
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
This reverts commit 8e3b6475c9.
After reading the background of bugzilla:
https://bugzilla.redhat.com/show_bug.cgi?id=1510922
It is not a problem actually, sorry for the noise.
Although root set different "PATH" can lead to wrong script, but it is
different with what the bug described "current working dir" and it is
not a problem worth an update
Since we call dracut directly on current working directory "." so it is
possible to trick root to call fake code.
Thus move to use absolute path instead.
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Bhupesh Sharma <bhsharma@redhat.com>
Resolves: BZ1484945
https://bugzilla.redhat.com/show_bug.cgi?id=1484945
Currently the kdumpctl script doesn't handle
whitespaces (including TABs) which might be there before
an option name in the kdump.conf
This patch addresses this issue, by ensuring that the
kdumpctl errors out in case it finds any stray space(s)
or tab(s) before a option name.
Reported-by: Kenneth D'souza <kdsouza@redhat.com>
Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
Acked-by: Pratyush Anand <panand@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
This commit eliminates a redundant kdump_get_mac_addr call in
kdump_setup_netdev.
Signed-off-by: Ziyue Yang <ziyang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Currently in Fedora/RedHat dracut installs its fedora.conf.example
as the default config file, in which sysloglvl is set 5. This leads
to maxloglvl=5 in dracut calls, making unnecessary lsinitrd calls
during initramfs builds by kdump.
This patch makes use of
https://github.com/dracutdevs/dracut/pull/272
and disables lsinitrd logging by giving "-q" option to dracut,
eliminating unnecessary lsinitrd calls in dracut.
1) Before this patch
$ kdumpctl stop; touch /etc/kdump.conf; time kdumpctl start
kexec: unloaded kdump kernel
Stopping kdump: [OK]
Detected change(s) in the following file(s):
/etc/kdump.conf
Rebuilding /boot/initramfs-4.13.0-0.rc1.git4.1.fc27.x86_64kdump.img
kexec: loaded kdump kernel
Starting kdump: [OK]
real 0m26.824s
user 0m9.958s
sys 0m15.106s
2) After this patch
$ kdumpctl stop; touch /etc/kdump.conf; time kdumpctl start
kexec: unloaded kdump kernel
Stopping kdump: [OK]
Detected change(s) in the following file(s):
/etc/kdump.conf
Rebuilding /boot/initramfs-4.13.0-0.rc1.git4.1.fc27.x86_64kdump.img
kexec: loaded kdump kernel
Starting kdump: [OK]
real 0m20.420s
user 0m8.385s
sys 0m10.468s
[dyoung]:
- rewrite patch subject
Signed-off-by: Ziyue Yang <ziyang@redhat.com>
Reviewed-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
mkdumprd removes "noauto" mount option, but it also mistakenly removes
"noauto" within a string. For example ext4 has mount option noauto_da_alloc
mkdumprd will replace it with _da_alloc.
Use '\b' to match a whole word of "noauto" to fix it.
Also do same for s/ro/rw for same reason.
Signed-off-by: Dave Young <dyoung@redhat.com>
Reveiwed-by: Xunlei Pang <xlpang@redhat.com>
As default initrd is used for booting fadump capture kernel, it must be
rebuilt with dump capture capability when dump mode is fadump. Check if
default initrd is already fadump capable and rebuild, if necessary.
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Reviewed-by: Xunlei Pang <xlpang@redhat.com>
After adding "--hostonly-cmdline", besides 99kdump, 95iscsi
also generates iscsi related cmdline. IOW, we have duplicate
software iscsi cmdlines.
95iscsi generated software iscsi cmdline doesn't work, so we
remove that of 95iscsi and use that of 99kdump which has been
well tested.
We can change to use 95iscsi when possible in the future.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Now with the help of "--hostonly-cmdline", dracut will generate
the needed cmdlines for the dump target, so we can avoid the
corresponding duplicate or unnecessary inheritage.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Dracut has "--hostonly-cmdline" which can generate cmdlines(if any)
regarding the dump target, it's an existing way for us to use to
simplify the code. E.g. We already removed generate_lvm_cmdlines(),
to use "--hostonly-cmdline".
But "--hostonly-cmdline" has other issues(e.g. BZ1451717), it adds
needless devices for kdump like root device.
Now dracut supports "--no-hostonly-default-device" which enables
us to only add the kdump target, which can avoid needless devices
being recognized under kdump. Thus "--hostonly-cmdline" side effects
can be avoided with the help of "--no-hostonly-default-device".
This patch applies dracut's "--hostonly-cmdline" together with
"--no-hostonly-default-device" to achieve above-mentioned purpose.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Currently, we kept "root=X" for the dump_to_rootfs case, this
patch consolidates to use "--mount" for all the kdump mounts.
One advantage of this way is that dracut can correctly mark root
(in case of dump_to_rootfs is specified) as the host device when
"--no-hostonly-default-device" is added in the following patch.
Changed the code style in passing, as shellcheck tool reported:
Use $(..) instead of deprecated `..`
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Make is_fadump_capable() a library function, as we will need
it in mkdumprd.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
This reverts commit cb38b32dfc.
We are going to add "--hostonly-cmdline" dracut argument in
the following patch.
With the help of "--hostonly-cmdline", dracut will generate
"rd.lvm.lv=X" for us, no need to implement here again.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
This reverts commit 54a5bcc4ee.
We are going to add "--no-hostonly-default-device" dracut argument
in the following patch.
With the help of "--no-hostonly-default-device", dracut only
adds the dump target as host devices, which naturally guarantees
only required dracut modules being selected.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
This reverts commit 821d1af080.
We are going to add "--no-hostonly-default-device" dracut argument
in the following patch.
With the help of "--no-hostonly-default-device", dracut only
adds the dump target as host devices, which naturally guarantees
only required dracut modules being selected.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
This reverts commit fb522e972c.
We are going to add "--no-hostonly-default-device" dracut argument
in the following patch.
With the help of "--no-hostonly-default-device", dracut only
adds the dump target as host devices, which naturally guarantees
only required dracut modules being selected.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Added patch from panand which was accepted by upstream but not merged in upstream yet.
kexec-tools-2.0.15-makedumpfile-fix-SECTION_MAP_MASK-for-kernel-bigger-than-4.13.patch
