makedumpfile_eppic.so (provided by kexec-tools-eppic) is built against
makedumpfile (provided by kexec-tools). kexec-tools-eppic must depend on
the same version.release of kexec-tools, otherwise there could be a ABI
compatibility issue.
Signed-off-by: WANG Chao <chaowang@redhat.com>
Just merge the kdump-anadonda-addon.pot to po files of original
firstboot so that we can reuse most of the translation. But there
still are three sentences that has no translation.
Signed-off-by: Arthur Zou <zzou@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Currently this work is done by firstboot. Now we move to anaconda addon
to configurate in the system installation process.
Signed-off-by: Arthur Zou <zzou@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
During debugging of another problem issues were noted with the kdump udev
rules. The kdump service is restarted on memory add and remove events.
These are the wrong events for these types of devices and result in an overly
aggressive restarting of the kdump service.
There are four udev events to consider, "add", "remove", "online", and
"offline". The remove event is a complete removal from the system -- neither
the hardware nor the kernel know about the hardware; it has been physically
removed. The add event is associated with hardware being physically added to
the system. The kernel has some limited knowledge of the device, however,
it is not avaiable for the kernel to use until it is brought online. Online
events refer to the device being available for the kernel to use. Opposite
to that is the offline event, which occurs when a device is no longer in
use by the kernel.
Note that in all four events the kernel *may* have some remaining information
stored about the device.
In the case of memory hotplug, kdump should be restarted when a memory module
is onlined or offlined. This is because the memory is not in use by the
kernel until the memory is onlined, and it is unused when the memory is
offlined.
Making these modifications results in smooth service on systems that do
heavy memory onlining and offlining.
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
In current systemd implementation, nofail mount will not block
local-fs.target, which means our kdump.sh (in dracut-pre-pivot.service)
can't wait for nofail mount. And kdump.sh could run early than nofail
mount happens.
For short term, let's stop passing nofail to mount. As for
sysroot.mount, since we have explicitly specify to wait for it, "nofail"
isn't a problem.
Signed-off-by: WANG Chao <chaowang@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
In case no target is specified explicitly in /etc/kdump.conf, the behavior
of path is changed, a check need be taken to see if any separate file
system is mounted on any tier of 'path', and also to take the relevant
action. Now the path section need be renewed for kdump.conf and its
man page accordingly.
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
In case no target is specified explicitly in /etc/kdump.conf, the behavior
of path is changed, a check need be taken to see if any separate file
system is mounted on any tier of 'path', and also to take the relevant
action. Now the path section need be renewed accordingly.
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
If default target is a separate disk, the related information need be
stored in /etc/kdump.conf of kdump initramfs. This includes the disk
info which will help to deduce the dump_code and path which the vmcore
will be written into.
v5->v7:
No v6 for this patch. Just use newly introduced function
is_fs_type_nfs in default_dump_target_install_conf().
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
When user does not specify dump target explicitly, it's better to
dump to the "path" specified. That means after dump user enter into
1st kernel, can find vmcore in the "path". If that path is in root
fs, vmcore is stored in root fs. If separate disk is mounted on
any tier of "path", we just dump vmcore into the left path on the
left separate disk.
E.g in kdump.conf
path /mnt/nfs
in mount info,
/dev/vdb on /mnt type ext4 (rw,relatime,seclabel,data=ordered)
Then vmcore will be saved in /nfs of /dev/vdb.
In this patch, pass mount info to dracut in this case if separate
disk is mounted on any tier of "path".
Meanwhile introduce a function in kdump-lib.sh to check if any
target is specified.
v4->v5:
Per Vivek's comment, add a helper function is_fs_dump_target.
Then is_user_configured_dump_target is rewrite with these helper
functions.
v5->v7:
No v6 for this patch. Just use newly introduced function
is_fs_type_nfs in handle_default_dump_target.
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
kdump need create the dir specified in "path" formerly if it does not
exist. Now change the behavior to be that ueser takes charge of the
"path", make sure "path" has been created, especially when separate disk
is mounted on this "path".
Also introduce 2 helper functions to help check the existence of path.
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
These utility function will be shared by several files, they are all
operation related to mount stuff.
Meantime define DEFAULT_PATH="/var/crash".
v5-> v6:
Since in rhel7 nfs4 becomes default nfs version, and its fstype is
nfs4. So change the implementation of get_fs_type_from_target(),
whatever fstype returned from findmount, just echo nfs as fstype for all
nfs version.
v6->v7:
Introduce is_fs_type_nfs to check if fstype is nfs or nfs4 per Vivek's
idea.
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
kdump-dep-generator is a systemd generator, used to write out kdump
service dependencies.
Currently it's only useful for ssh dump case. And in ssh dump case, it
writes out a dependency which kdump.service "Wants"
network-online.target:
# ls -l /run/systemd/generator/kdump.service.wants/
[..] network-online.target -> /usr/lib/systemd/system/network-online.target
So that kdump.service will pull in network-online.target and delayed
start until network-online.target is reached.
In the future, we could use generator to write out kdump.service
dynamically and get rid of the static defined kdump.service at all.
v1->v2:
Vivek: not using hardcoded run time generator path, use what systemd pass in.
Signed-off-by: WANG Chao <chaowang@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Adds two new options to kdump.conf to be able to configure fence_kdump
support for generic clusters:
fence_kdump_args <arg(s)>
- Command line arguments for fence_kdump_send (it can contain all
valid arguments except hosts to send notification to)
fence_kdump_nodes <node(s)>
- List of cluster node(s) separated by space to send fence_kdump
notification to (this option is mandatory to enable fence_kdump)
Generic clusters fence_kdump configuration take precedence over older
method of fence_kdump configuration for Pacemaker clusters. It means
that if fence_kdump is configured using above options in kdump.conf, old
Pacemaker configuration is not used even if it exists.
Bug-Url: https://bugzilla.redhat.com/1078134
Signed-off-by: Martin Perina <mperina@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Adds get_option_value() function to retrieve value of specified option
from /etc/kdump.conf.
Bug-Url: https://bugzilla.redhat.com/1078134
Signed-off-by: Martin Perina <mperina@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Renames check_fence_kdump to check_pcs_fence_kdump to clearly identify
that this method checks only Pacemaker configuration of fence_kdump.
Bug-Url: https://bugzilla.redhat.com/1078134
Signed-off-by: Martin Perina <mperina@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Renames kdump_check_fence_kdump kdump_configure_fence_kdump to clearly
identify what this function does.
Bug-Url: https://bugzilla.redhat.com/1078134
Signed-off-by: Martin Perina <mperina@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Renames is_fence_kdump to is_pcs_fence_kdump to identify that this
method should be used to detect fence_kdump configuration only in
Pacemaker clusters.
Bug-Url: https://bugzilla.redhat.com/1078134
Signed-off-by: Martin Perina <mperina@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Renames FENCE_KDUMP_NODES variable to FENCE_KDUMP_NODES_FILE to
distinguish it from values read from fence_kdump_nodes option in
kdump.conf (introduced in following patches).
Bug-Url: https://bugzilla.redhat.com/1078134
Signed-off-by: Martin Perina <mperina@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Renames FENCE_KDUMP_CONFIG variable to FENCE_KDUMP_CONFIG_FILE to
distinguish it from values read from fence_kdump_args option in
kdump.conf (introduced in following patches).
Bug-Url: https://bugzilla.redhat.com/1078134
Signed-off-by: Martin Perina <mperina@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Add a README file which explains what's the process for kexec-tools patch
inclusion and where one should post patches for review. This should help
with removing some confusion.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Now when dump target is not specified, separate disk can't be mounted on
"path", e.g /var/crash. However if target is specified, whatever the default
fail action is set, mkdumprd should go ahead and not be failed.
In check_block_dump_target(), the check only on disk is not complete,
NFS and ssh need be filtered too. So introduce is_user_configured_dump_target
to check this.
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
In exteme case vmcore-dmesg will overflow. upstream has fixed the
some problem. so simply backport it
Signed-off-by: Arthur Zou <zzou@redhat.com>
Acked-by: WANG Chao <chaowang@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
When kdump service is started, /sbin/mkdump checks if there is enough
free space on the ssh server using "df -P" command.
However, the slight difference in the first line of the "df -P" command
output for English and Japanese environment causes a problem.
-----
# LANG=en_us.utf8 df -P | head -1
Filesystem 1024-blocks Used Available Capacity Mount on
# LANG=ja_JP.utf8 df -P | head -1
ファイルシス 1024-ブロック 使用 使用可 容量 マウント位置
-----
Because the number of words is 7 in the English output and 6 in
Japanese, the subsequent awk command could not correctly locate the
free space field and results in an error.
One way to fix it is use df -P /var/crash|tail -1, but for remote restricted
shell pipe is not supported. Thus fix this by print field NF-2 in awk script.
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: WANG Chao <chaowang@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Let's omit resume module when building kdump initramfs, because:
- kdump don't want to resume
- it would pull in the swap device dependencie
Tested on Fedora20. This change doesn't break anything.
Signed-off-by: WANG Chao <chaowang@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
kdump now dumps vmcore to root partition by default in SAVE_PATCH
directory, e.g /var/crash defaultly. This is problematic when another
disk is mounted on /var or /var/crash, because the saved vmcore will
he hidden after dump in 1st kernel. This also has the potential of
blindly filling the root file system without a clue as to why.
Now fix this by failing the loading of kdump kernel if dump target
is root fs by default while different disk is mounted on save path.
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Move the invocation of check_resettable() to be together with all
other invocation of functions. This can make the flow of script
clearer and more readable.
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
In function get_block_dump_target(), code block to get user configured
dump disk and get root fs device can be reused by other places. Now
abstract and wrap them into 2 new functions:
get_user_configured_dump_disk()
get_root_fs_device()
And put them into kdump-lib.sh.
Meanwhile change the get_block_dump_target() accordingly.
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
The old implementation in installkernel() will not return success when
added wdt module is not iTCO_wdt. The returned value is related to the
comparison. This is not correct and will cause kdump load failed.
Now move the exact wdt module inserting to the right place, this can
be fixed.
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
