Commit Graph

1578 Commits

Author SHA1 Message Date
Hari Bathini
146f662622 kdump/ppc64: migration action registration clean up
While kdump migration action is registered for LPM event, ensure it is
cleared as appropriate to avoid duplicate/stale notification entries.

Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-07-31 19:40:14 +08:00
Fedora Release Engineering
152cf5e46c - Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild
Signed-off-by: Fedora Release Engineering <releng@fedoraproject.org>
2021-07-22 09:42:58 +00:00
Coiby Xu
b2bbb54d89 Check the existence of /sys/bus/ccwgroup/devices/*/online beforehand
On s390x KVM machines, the following errors would show when building kdump
initramfs that dumps vmcore to a remote target,
    $ kdumpctl rebuild
    /usr/lib/dracut/modules.d/99kdumpbase/module-setup.sh: line 475: /sys/bus/ccwgroup/devices/online: No such file or directory
    /usr/lib/dracut/modules.d/99kdumpbase/module-setup.sh: line 476: [: -ne: unary operator expected

This happens because s390x KVM machines use virtual network and
/sys/bus/ccwgroup/devices/ exists but is empty. Fix it by check
the existence of file "/sys/bus/ccwgroup/devices/*/online".

Fixes: commit 7d47251568
       ("Iterate /sys/bus/ccwgroup/devices to tell if we should set up rd.znet")

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1982474
Reported-by: Jie Li <jieli@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
t Acked-by: Kairui Song <kasong@redhat.com>
2021-07-21 17:10:28 +08:00
Kairui Song
660cf4ac03 Make dump_to_rootfs wait for 90s for real
When `failure_action` is set to `dump_to_rootfs`, the message:
"Waiting for rootfs mount, will timeout after 90 seconds"
is actually wrong. Kdump will simply call `systemctl start sysroot.mount`,
but the timeout value of sysroot.mount depends on the unit service and
dracut parameters. And by default, dracut will set
JobRunningTimeoutSec=0 and JobTimeoutSec=0 for the device units,
which means it will wait forever. (see wait_for_dev function in dracut)

For some devices, this can be fixed by setting rd.timeout=90. But when
initqueue is set enabled during initramfs build, dracut will force set
timeout for host devices to `0`. (see 99base/module-setup.sh).

Depending on dracut / systemd can make things unpredictable and break as
parameters or code change. To make things easy to understand and
maintain, just call `systemctl` with `--no-block` params, and implement
a standalone wait loop.  Now `dump_to_rootfs` will actually wait for
90s then timeout.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Coiby Xu <coxu@redhat.com>
2021-07-21 15:40:38 +08:00
Kairui Song
7435ecf3c4 Update crashkernel-howto.txt
Fix some grammar issues.

Signed-off-by: Kairui Song <kasong@redhat.com>
2021-07-21 14:05:42 +08:00
Hari Bathini
71b7a2f47c kdump/ppc64: rebuild initramfs image after migration
Dump capture initramfs needs rebuild after partition migration (LPM).
Use servicelog notification mechanism to invoke kdump rebuild after
migration.

Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-07-21 10:53:59 +08:00
Philipp Rudo
914a856c66 kdump.sysconfig.s390: Remove "prot_virt" from kdump kernel cmdline
"prot_virt" enables the kernel to run Secure Execution virtual machines
on s390. These virtual machines are isolated from the hypervisor and
thus protected against tampering by a malicious host. Enabling
"prot_virt" requires a minimum of ~2.5GB memory which exceeds what is
typically reserved for the crashkernel. Thus remove "prot_virt" from the
command line for the 2nd kernel to prevent it to run out-of-memory.

For more discussions about this, see:
https://lists.fedoraproject.org/archives/list/kexec@lists.fedoraproject.org/thread/QSRRNV4ALKXUJC2VM3US4Z2NSQRHVMXB/

Signed-off-by: Philipp Rudo <prudo@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
2021-07-20 15:57:05 +08:00
Kairui Song
bcd8d6a47b kdumpctl: fix a typo
Recommanded -> Recommended

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Coiby Xu <coxu@redhat.com>
2021-07-20 15:57:05 +08:00
Zbigniew Jędrzejewski-Szmek
c894022e9b Remove references to systemd-sysv-convert
Packaging guidelines have been amended to not require systemd for scriptlets,
see https://docs.fedoraproject.org/en-US/packaging-guidelines/Scriptlets/#_scriptlets.

The comment duplicates what the macro contains.

systemd-sysv-convert binary was removed in 2013, trying to call it is
unlikely to succeed.

chkconfig binary is provided by the chkconfig package, which is not in
Requires. (And makes little sense to call nowadays anyway.)
2021-07-18 16:36:52 +00:00
Kairui Song
7b7ddaba88 kdump-lib.sh: kdump_get_arch_recommend_size uses crashkernel.default
The new `crashkernel.default` file in kernel package can be used as the
ck_cmdline source.

Also keep the legacy code so old kernel packages will still work.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
2021-07-14 02:04:06 +08:00
Coiby Xu
231a75ac1b Revert "Revert "x86_64: enable the kexec file load by default""
This reverts commit 073c30973c, i.e.
re-enable the kexec file load by default since this dual signature
issue no longer bothers Fedora 34.

Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-07-14 02:03:10 +08:00
Kairui Song
2603ba7187 Cleanup dead systemd services before start sysroot.mount
When kdump failed due to initqueue timeout, the sysroot.mount and other
serivces could be stuck in `start` but `dead` status:

Example output of systemctl:

dev-disk-by\x2duuid-530830d1\x2df2c7\x2d4c9a\x2d9a82\x2d148609097521.device loaded inactive   dead    start
<... snip ...>
squash-root.mount		loaded active     mounted       /squash/root
squash.mount			loaded active     mounted       /squash
sysroot.mount			loaded inactive   dead    start /sysroot
<... snip ...>
dracut-cmdline.service		loaded active     exited        dracut cmdline hook
dracut-initqueue.service	loaded activating start   start dracut initqueue hook
dracut-mount.service		loaded inactive   dead    start dracut mount hook

At this point calling `systemctl start sysroot.mount` will just hang as
systemd will just wait for the services that are stuck in `start`
status. So call `systemctl cancel` here to cancel all pending jobs and
have a clean start for mounting sysroot.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Coiby Xu <coxu@redhat.com>
2021-07-12 16:53:34 +08:00
Kairui Song
7dbbb4bb31 Add a crashkernel-howto.txt doc
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
2021-07-08 15:36:36 +08:00
Kairui Song
6463641935 Add a new hook: 92-crashkernel.install
To track and manage kernel's crashkernel usage by kernel version,
each kernel package will include a crashkernel.default containing the
default `crashkernel=` value of that kernel. So we can use a hook to
update the kernel cmdline of new installed kernel accordingly.

Put it after all other grub boot loader setup hooks, so it can simply
call grubby to modify the kernel cmdline.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
2021-07-08 15:36:32 +08:00
Kairui Song
86130ec10f kdumpctl: Add kdumpctl reset-crashkernel
In newer kernel, crashkernel.default will contain the default
crashkernel value of a kernel build. So introduce a new sub command
to help user reset kernel crashkernel size to the default value.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
2021-07-08 15:18:45 +08:00
Kairui Song
017903c3c4 Revert "kdump-lib.sh: Remove is_atomic"
Now we need this helper again, for `reset-crashkernel`

This reverts commit ff46cfb19e.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
2021-07-08 15:18:00 +08:00
Kairui Song
97930d3cca fadump-init: clean up mount points properly
When running with squash module enabled for both initramfs, /dev and
/run are also mounted by squash-init, so move them to newroot as well,
else they might leak.

Also pass `-d` to umount so loop devices (if used) will be force freed.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
2021-06-30 17:28:45 +08:00
Kairui Song
bf6671b60d fadump: kdumpctl should check the modules used by the fadump initramfs
After fadump embedded the fadump initramfs in the normal initramfs,
kdumpctl will mistakenly rebuild the initramfs everytime.

kdumpctl checks the hostonly-kernel-modules.txt file in initramfs
to check if required drivers are included, but the normal initramfs
is built in non-hostonly mode, so it doesn't have a
hostonly-kernel-modules.txt file. The check will always fail.

So let mkfadumprd make a copy of the hostonly-kernel-modules.txt in the
fadump initramfs and let kdumpctl check that file instead.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
2021-06-30 17:27:02 +08:00
Hari Bathini
fa9201b240 fadump: isolate fadump initramfs image within the default one
In case of fadump, the initramfs image has to be built to boot into
the production environment as well as to offload the active crash dump
to the specified dump target (for boot after crash). As the same image
would be used for both boot scenarios, it could not be built optimally
while accommodating both cases.

Use --include to include the initramfs image built for offloading
active crash dump to the specified dump target. Also, introduce a new
out-of-tree dracut module (99zz-fadumpinit) that installs a customized
init program while moving the default /init to /init.dracut. This
customized init program is leveraged to isolate fadump image within
the default initramfs image by kicking off default boot process
(exec /init.dracut) for regular boot scenario and activating fadump
initramfs image, if the system is booting after a crash.

If squash is available, ensure default initramfs image is also built
with squash module to reduce memory consumption in capture kernel.

Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-06-29 21:35:58 +08:00
Kairui Song
c4749f9c57 Release 2.0.22-4
Signed-off-by: Kairui Song <kasong@redhat.com>
2021-06-29 21:24:19 +08:00
Coiby Xu
ad6f60d70d fix format issue in find_online_znet_device
Change spaces to tab to fix alignment issue.

Fixes: commit 7d47251568
       ("Iterate /sys/bus/ccwgroup/devices to tell if we should set up rd.znet")
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-06-29 17:11:07 +08:00
Coiby Xu
03f9b91351 check the existence of /sys/bus/ccwgroup/devices before trying to find online network device
/sys/bus/ccwgroup/devices doesn't exist for non-s390x machines which leads to
the warning "find: '/sys/bus/ccwgroup/devices': No such file or directory".
This warning can be eliminated by checking the existence of
"/sys/bus/ccwgroup/devices" beforehand.

Fixes: commit 7d47251568
       ("Iterate /sys/bus/ccwgroup/devices to tell if we should set up rd.znet")

Reported-by: Ruowen Qin <ruqin@redhat.com>
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1974618
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-06-29 17:11:00 +08:00
Tao Liu
50bb8b701f check for invalid physical address of /proc/kcore when making ELF dumpfile
Backport from upstream.

commit 9a6f589d99dcef114c89fde992157f5467028c8f
Author: Tao Liu <ltao@redhat.com>
Date:   Fri Jun 18 18:28:04 2021 +0800

    [PATCH] check for invalid physical address of /proc/kcore when making ELF dumpfile

    Previously when executing makedumpfile with -E option against
    /proc/kcore, makedumpfile will fail:

      # makedumpfile -E -d 31 /proc/kcore kcore.dump
      ...
      write_elf_load_segment: Can't convert physaddr(ffffffffffffffff) to an offset.

      makedumpfile Failed.

    It's because /proc/kcore contains PT_LOAD program headers which have
    physaddr (0xffffffffffffffff).  With -E option, makedumpfile will
    try to convert the physaddr to an offset and fails.

    Skip the PT_LOAD program headers which have such physaddr.

    Signed-off-by: Tao Liu <ltao@redhat.com>
    Signed-off-by: Kazuhito Hagio <k-hagio-ab@nec.com>

Signed-off-by: Tao Liu <ltao@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-06-28 15:52:21 +08:00
Tao Liu
0feb109818 check for invalid physical address of /proc/kcore when finding max_paddr
Backport from upstream.

commit 38d921a2ef50ebd36258097553626443ffe27496
Author: Coiby Xu <coxu@redhat.com>
Date:   Tue Jun 15 18:26:31 2021 +0800

    [PATCH] check for invalid physical address of /proc/kcore when finding max_paddr

    Kernel commit 464920104bf7adac12722035bfefb3d772eb04d8 ("/proc/kcore:
    update physical address for kcore ram and text") sets an invalid paddr
    (0xffffffffffffffff = -1) for PT_LOAD segments of not direct mapped
    regions:

      $ readelf -l /proc/kcore
      ...
      Program Headers:
        Type           Offset             VirtAddr           PhysAddr
                       FileSiz            MemSiz              Flags  Align
        NOTE           0x0000000000000120 0x0000000000000000 0x0000000000000000
                       0x0000000000002320 0x0000000000000000         0x0
        LOAD           0x1000000000010000 0xd000000000000000 0xffffffffffffffff
                                                             ^^^^^^^^^^^^^^^^^^
                       0x0001f80000000000 0x0001f80000000000  RWE    0x10000

    makedumpfile uses max_paddr to calculate the number of sections for
    sparse memory model thus wrong number is obtained based on max_paddr
    (-1).  This error could lead to the failure of copying /proc/kcore
    for RHEL-8.5 on ppc64le machine [1]:

      $ makedumpfile /proc/kcore vmcore1
      get_mem_section: Could not validate mem_section.
      get_mm_sparsemem: Can't get the address of mem_section.

      makedumpfile Failed.

    Let's check if the phys_start of the segment is a valid physical
    address to fix this problem.

    [1] https://bugzilla.redhat.com/show_bug.cgi?id=1965267

    Reported-by: Xiaoying Yan <yiyan@redhat.com>
    Signed-off-by: Coiby Xu <coxu@redhat.com>

Signed-off-by: Tao Liu <ltao@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-06-28 15:52:16 +08:00
Tao Liu
18b9b763de Increase SECTION_MAP_LAST_BIT to 5
Backport from upstream.

commit 646456862df8926ba10dd7330abf3bf0f887e1b6
Author: Kazuhito Hagio <k-hagio-ab@nec.com>
Date:   Wed May 26 14:31:26 2021 +0900

    [PATCH] Increase SECTION_MAP_LAST_BIT to 5

    * Required for kernel 5.12

    Kernel commit 1f90a3477df3 ("mm: teach pfn_to_online_page() about
    ZONE_DEVICE section collisions") added a section flag
    (SECTION_TAINT_ZONE_DEVICE) and causes makedumpfile an error on
    some machines like this:

      __vtop4_x86_64: Can't get a valid pmd_pte.
      readmem: Can't convert a virtual address(ffffe2bdc2000000) to physical address.
      readmem: type_addr: 0, addr:ffffe2bdc2000000, size:32768
      __exclude_unnecessary_pages: Can't read the buffer of struct page.
      create_2nd_bitmap: Can't exclude unnecessary pages.

    Increase SECTION_MAP_LAST_BIT to 5 to fix this.  The bit had not
    been used until the change, so we can just increase the value.

    Signed-off-by: Kazuhito Hagio <k-hagio-ab@nec.com>

Signed-off-by: Tao Liu <ltao@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-06-28 15:52:02 +08:00
Kairui Song
302be5c34b Release 2.0.22-3
Signed-off-by: Kairui Song <kasong@redhat.com>
2021-06-20 02:38:04 +08:00
Coiby Xu
62578ace21 selftest: ignore all spaces when compare the dmesg files
For the log entry that has multiple lines, "makedumpfile --dump-dmesg"
would indent the remaining lines while vmcore-dmesg doesn't. For
example, vmcore-dmesg.txt and vmcore-dmesg.txt.2 are the outputs of
vmcore-dmesg and "makedumpfile --dump-dmesg" respectively,

    ```
    diff -u vmcore-dmesg.txt vmcore-dmesg.txt.2
    --- vmcore-dmesg.txt    2021-03-28 22:13:09.986000000 -0400
    +++ vmcore-dmesg.txt.2  2021-03-28 22:13:39.920106131 -0400
    @@ -397,9 +397,9 @@
     [    1.710742] vc vcsa: hash matches
     [    1.711938] RAS: Correctable Errors collector initialized.
     [    1.713736] Unstable clock detected, switching default tracing clock to "global"
    -If you want to keep using the local clock, then add:
    -  "trace_clock=local"
    -on the kernel command line
    +               If you want to keep using the local clock, then add:
    +                 "trace_clock=local"
    +               on the kernel command line
     [    1.750539] ata1.01: NODEV after polling detection
     [    1.750973] ata1.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100
     [    1.752885] ata1.00: 8388608 sectors, multi 16: LBA48
    ```

Quite often, all three tests could fail because of the above difference. So
let's ignore all the spaces. This patch could fix bz1952299 [1].

[1] https://bugzilla.redhat.com/show_bug.cgi?id=1952299

Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-06-08 22:21:47 +08:00
Coiby Xu
560c0e8a7b selftest: Make test_base_image depends on EXTRA_RPMS
test_base_image should depend on EXTRA_RPMS so it gets rebuild when
EXTRA_RPMS changes.

Fixes: commit bbc064f958
       ("selftest: add EXTRA_RPMs so dracut RPMs can be installed onto
        the image to run the tests")
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-06-08 22:21:47 +08:00
Coiby Xu
0a15d859bb selftest: fix the error of misplacing double quotes
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-06-08 22:21:47 +08:00
Lianbo Jiang
2d9504c4a4 mkdumprd: display the absolute path of dump location in the check_user_configured_target()
When kdump service fails, the current errors do not display the
absolute path of dump location(marked it as "^"), for example:

kdump: kexec: unloaded kdump kernel
kdump: Stopping kdump: [OK]
kdump: Detected change(s) in the following file(s):  /etc/kdump.conf
kdump: Rebuilding /boot/initramfs-4.18.0-304.el8.x86_64kdump.img
kdump: Dump path "/var1/crash" does not exist in dump target "UUID=c202ef45-3ac3-4adb-85e7-307a916757f0"
                  ^^^^^^^^^^^
kdump: mkdumprd: failed to make kdump initrd
kdump: Starting kdump: [FAILED]

Here, it should output the absolute path of dump location with this
format: "<mount path>/<path>". To fix it, let's extend the relative
pathname to the absolute pathname in check_user_configured_target().

Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-06-08 10:49:24 +08:00
Coiby Xu
7d47251568 Iterate /sys/bus/ccwgroup/devices to tell if we should set up rd.znet
This patch fixes bz1941106 and bz1941905 which passed empty rd.znet to the
kernel command line in the following cases,
 - The IBM (Z15) KVM guest uses virtio for all devices including network
   device, so there is no znet device for IBM KVM guest. So we can't
   assume a s390x machine always has a znet device.
 - When a bridged network is used, kexec-tools tries to obtain the znet
   configuration from the ifcfg script of the bridged network rather than
   from the ifcfg script of znet device.

We can iterate /sys/bus/ccwgroup/devices to tell if there if there is
a znet network device. By getting an ifname from znet, we can also avoid
mistaking the slave netdev as a znet network device in a bridged network
or bonded network.

Note: This patch also assumes there is only one znet device as commit
7148c0a30d ("add s390x netdev setup")
which greatly simplifies the code. According to IBM [1], there could be
more than znet devices for a z/VM system and a z/VM system may have a
non-znet network device like ConnectX. Since kdump_setup_znet was
introduced in 2012 and so far there is no known customer complaint that
invalidates this assumption I think it's safe to assume an IBM z/VM
system only has one znet device. Besides, there is no z/VM system found
on beaker to test the alternative scenarios.

[1] https://bugzilla.redhat.com/show_bug.cgi?id=1941905#c13

Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-06-08 10:48:34 +08:00
Kairui Song
41980f30d9 Use a customized emergency shell
Use a modified and minimized version of emergency shell.
The differences of this kdump shell and dracut emergency shell are:

  - Kdump shell won't generate a rdsosreport automatically
  - Customized prompts
  - Never ask root password
  - Won't tangle with dracut's emergency_action. If emergency_action is
    set, dracut emergency shell will perform dracut's emergency_action
    instead of kdump final_action on exit.
  - If rd.shell=no is set, kdump shell will still work, dracut emergency
    shell won't, even if kdump failure_action is set to shell.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Coiby Xu <coxu@redhat.com>
2021-06-04 14:26:51 +08:00
Kairui Song
a2306346bc Remove the kdump error handler isolation wrapper
The wrapper is introduced in commit 002337c, according to the commit
message, the only usage of the wrapper is when dracut-initqueue calls
"systemctl start emergency" directly. In that case, emergency
is started, but not in a isolation mode, which means dracut-initqueue
is still running. On the other hand, emergency will call
"systemctl start dracut-initqueue" again when default action is dump_to_rootfs.

systemd would block on the last dracut-initqueue, waiting for the first
instance to exit, which leaves us hang.

In previous commit we added initqueue status detect in dump_to_rootfs,
so now even without the wrapper, it will not hang.

And actually, previously, with the wrapper, emergency might still hang
for like 30s. When dracut called emergency service because initqueue
timed out, dump_to_rootfs will try start initqueue again and timeout
again. Now with the wrapper removed, we can avoid these two kinds of
hangs, bacause without the isolation we can detect initqueue service
status correctly in such case.

Also remove the invalid header comments in service file, the service
is not part of systemd code. And sync the service spec with dracut.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Coiby Xu <coxu@redhat.com>
2021-06-04 14:26:45 +08:00
Kairui Song
108258139a Don's try to restart dracut-initqueue if it's already there
kdump's dump_to_rootfs will try to start initqueue unconditionally.
dump_to_rootfs will run after systemd isolate to emergency
target, so this is currently accetable.

But there is a problem when initqueue starts the emergency action
because of initqueue timeout. dump_to_rootfs will start initqueue and
lead to timeout again.

So following patch will remove the previous isolation wrapper, and
detect the service status here. Previous isolation makes the detection
impossible. Now this detection will be valid and helpful to prevent
double timeout or hang.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Coiby Xu <coxu@redhat.com>
2021-06-04 14:25:37 +08:00
Hari Bathini
39a642b66b kdump-lib.sh: fix a warning in prepare_kdump_bootinfo()
Fix the warning observed when KDUMP_KERNELVER is specified:

  kdumpctl[10926]: /lib/kdump/kdump-lib.sh: line 697: [: missing `]'

Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-06-04 02:53:10 +08:00
Pingfan Liu
45377836b0 kdump-lib.sh: fix the case if no enough total RAM for kdump in get_recommend_size()
For crashkernel=auto policy, if total RAM size is under a throttle,
there is no memory reserved for kdump.

Also correct a trivial bug by correcting the arch name.

Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-05-25 10:07:55 +08:00
Kairui Song
e9e6a2c745 kdumpctl: Add kdumpctl estimate
Add a rough esitimation support, currently, following memory usage are
checked by this sub command:

- System RAM
- Kdump Initramfs size
- Kdump Kernel image size
- Kdump Kernel module size
- Kdump userspace user and other runtime allocated memory (currently
  simply using a fixed value: 64M)
- LUKS encryption memory usage

The output of kdumpctl estimate looks like this:
  # kdumpctl estimate
  Reserved crashkernel:    256M
  Recommanded crashkernel: 160M

  Kernel image size:   47M
  Kernel modules size: 12M
  Initramfs size:      19M
  Runtime reservation: 64M
  Large modules:
      xfs: 1892352
      nouveau: 2318336

And if the kdump target is encrypted:
  # kdumpctl estimate
  Encrypted kdump target requires extra memory, assuming using the keyslot with minimun memory requirement

  Reserved crashkernel:    256M
  Recommanded crashkernel: 655M

  Kernel image size:   47M
  Kernel modules size: 12M
  Initramfs size:      19M
  Runtime reservation: 64M
  LUKS required size:  512M
  Large modules:
      xfs: 1892352
      nouveau: 2318336
  WARNING: Current crashkernel size is lower than recommanded size 655M.

The "Recommanded" value is calculated based on memory usages mentioned
above, and will be adjusted accodingly to be no less than the value provided
by kdump_get_arch_recommend_size.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
2021-05-19 15:27:43 +08:00
Kairui Song
85c725813b mkdumprd: make use of the new get_luks_crypt_dev helper
Simplfy the code and also improve the performance. udevadm call is
heavy.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
2021-05-19 15:27:37 +08:00
Kairui Song
1c70cf51c7 kdump-lib.sh: introduce a helper to get all crypt dev used by kdump
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
2021-05-19 15:27:19 +08:00
Kairui Song
3423bbc17f kdump-lib.sh: introduce a helper to get underlying crypt device
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
2021-05-19 15:26:58 +08:00
Kairui Song
13796ca93a Release 2.0.22-2
Signed-off-by: Kairui Song <kasong@redhat.com>
2021-05-13 17:14:38 +08:00
Tao Liu
d5fe96cd7a Disable CMA in kdump 2nd kernel
kexec-tools needs to disable CMA for kdump kernel cmdline,
otherwise kdump kernel may run out of memory.

This patch strips the inherited cma=, hugetlb_cma= cmd
line from 1st kernel, and sets to be 0 for 2nd kernel.

Signed-off-by: Tao Liu <ltao@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-05-13 17:13:39 +08:00
Coiby Xu
8178d7a5a1 Warn the user if network scripts are used
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-05-13 17:13:31 +08:00
Coiby Xu
d5f6d38173 Set up bond cmdline by "nmcli --get-values"
Now kdumpctl will exit if failing to set up bond cmdline.

Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-05-13 17:13:28 +08:00
Coiby Xu
6f1badec78 Set up dns cmdline by parsing "nmcli --get-values"
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-05-13 17:13:25 +08:00
Coiby Xu
8b08b4f17b Set up s390 znet cmdline by "nmcli --get-values"
Now kdumpctl will abort when failing to set up znet.

Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-05-13 17:13:15 +08:00
Coiby Xu
0c292f49c7 Add helper to get nmcli connection show cmd by ifname
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-05-13 17:13:08 +08:00
Coiby Xu
c69578ca43 Add helper to get nmcli connection apath by ifname
apath (a D-Bus active connection path) is used for nmcli connection operations, e.g.
  $ nmcli connection show $apath

Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-05-13 17:13:01 +08:00
Coiby Xu
10c309b5f7 Add helper to get value by field using "nmcli --get-values"
nmcli --get-values <field> connection show /org/freedesktop/NetworkManager/ActiveConnection/1
returns the following value for the corresponding field respectively,
  Field                                  Value
  IP4.DNS                                "10.19.42.41 | 10.11.5.19 | 10.5.30.160"
  802-3-ethernet.s390-subchannels        ""
  bond.options                           "mode=balance-rr"

Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-05-13 17:11:38 +08:00
Kairui Song
c05d8a16a0 Update makedumpfile to 1.6.9
Signed-off-by: Kairui Song <kasong@redhat.com>
2021-05-13 16:45:36 +08:00