Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2160676
Upstream: Fedora rawhide
Conflict: applied manually due to slight difference in context
commit 5b31b099ae
Author: Coiby Xu <coxu@redhat.com>
Date: Wed Apr 26 04:48:25 2023 +0800
Simplify the management of the kernel parameter crashkernel
Currently, kexec-tools only updates the crashkernel to a new default
value only when both two conditions are met,
- auto_reset_crashkernel=yes in kdump.conf
- existing kernels or current running kernel should use the old default
value.
To address seen corner cases, the logic to tell if the second condition
is met becomes quite complex. Instead of making the logic more complex
to support aarch64-64k, this patch drops the second condition to
simplify the management of the crashkernel kernel parameter.
Another change brought by this simplification is kexec-tools will also
set up the kernel crashkernel parameter for a fresh install (previously
it's limited to osbuild).
Note
1. This patch also stop trying to update /etc/default/grub because
a) it only affects the static file /boot/grub2/grub.cfg
b) grubby is recommended to change the kernel command-line parameters
for both Fedora [1] and RHEL9 [2][3]
c) For the cases of aarch64 and POWER, different kernels could have
different default crashkernel value.
2. Starting with Fedora 37, posttrans rpm scriplet distinguish between
package install and upgrade.
[1] https://fedoraproject.org/wiki/GRUB_2
[2] https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/9/html/managing_monitoring_and_updating_the_kernel/configuring-kernel-command-line-parameters_managing-monitoring-and-updating-the-kernel#changing-kernel-command-line-parameters-for-all-boot-entries_configuring-kernel-command-line-parameters
[3] https://access.redhat.com/solutions/1136173
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Resolves: bz2169720
Upstream: src.fedoraproject.org/rpms/kexec-tools.git
Conflicts: Small context difference in kexec-tools.spec
commit ea7be0608e
Author: Philipp Rudo <prudo@redhat.com>
Date: Fri May 5 17:14:42 2023 +0200
kdumpctl: Add basic UKI support
A Unified Kernel Image (UKI) is a single EFI PE executable combining an
EFI stub, a kernel image, an initrd image, and the kernel command line.
They are defined in the Boot Loader Specification [1] as type #2
entries. UKIs have the advantage that all code as well as meta data that
is required to boot the system, not only the kernel image, is combined
in a single PE file and can be signed for EFI SecureBoot. This extends
the coverage of SecureBoot extensively.
For RHEL support for UKI were included into kernel-ark with 16c7e3ee836e
("redhat: Add sub-RPM with a EFI unified kernel image for virtual
machines").
There are two problems with UKIs from the kdump point of view at the
moment. First, they cannot be directly loaded via kexec_file_load and
second, the initrd included isn't suitable for kdump. In order to enable
kdump on systems with UKIs build the kdump initrd as usual and extract
the kernel image before loading the crash kernel.
[1] https://uapi-group.org/specifications/specs/boot_loader_specification/
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Tao Liu <ltao@redhat.com>
Resolves: bz2060319
Upstream: Fedora
Conflict: commit a3da46d6 ("Skip reset_crashkernel_after_update
during package install") hasn't been backported. Note it's now
no longer needed.
commit 5951b5e268
Author: Coiby Xu <coxu@redhat.com>
Date: Tue Dec 20 13:59:18 2022 +0800
Don't try to update crashkernel when bootloader is not installed
Currently when using anaconda to install the OS, the following errors
occur,
INF packaging: Configuring (running scriptlet for): kernel-core-5.14.0-70.el9.x86_64 ...
INF dnf.rpm: grep: /boot/grub2/grubenv: No such file or directory
grep: /boot/grub2/grubenv: No such file or directory
grep: /boot/grub2/grubenv: No such file or directory
grep: /boot/grub2/grubenv: No such file or directory
...
INF packaging: Configuring (running scriptlet for): kexec-tools-2.0.23-9.el9.x86_64 ...
INF dnf.rpm: grep: /boot/grub2/grubenv: No such file or directory
grep: /boot/grub2/grubenv: No such file or directory
grep: /boot/grub2/grubenv: No such file or directory
Or for s390, the following errors occur,
INF packaging: Configuring (running scriptlet for): kernel-core-5.14.0-71.el9.s390x ...
03:37:51,232 INF dnf.rpm: grep: /etc/zipl.conf: No such file or directory
grep: /etc/zipl.conf: No such file or directory
grep: /etc/zipl.conf: No such file or directory
INF packaging: Configuring (running scriptlet for): kexec-tools-2.0.23-9_1.el9_0.s390x ...
INF dnf.rpm: grep: /etc/zipl.conf: No such file or directory
This is because when anaconda installs the packages, bootloader hasn't
been installed and /boot/grub2/grubenv or /etc/zipl.conf doesn't exist.
So don't try to update crashkernel when bootloader isn't ready to avoid
the above errors.
Note this is the second attempt to fix this issue. Previously a file
/tmp/kexec_tools_package_install was created to avoid running the
related code thus to avoid the above errors but unfortunately that
approach has two issues a) somehow osbuild doesn't delete it for RHEL b)
this file could still exist if users manually remove kexec-tools.
Fixes: e218128 ("Only try to reset crashkernel for osbuild during package install")
Reported-by: Jan Stodola <jstodola@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Resolves: bz2139000
Upstream: Fedora
Conflict: Upstream doesn't have Source37: supported-kdump-targets.txt,
so the number of SourceXX need to be changed.
commit 4a2dcab26a
Author: Hari Bathini <hbathini@linux.ibm.com>
Date: Fri Dec 2 18:46:51 2022 +0530
fadump: add a kernel install hook to clean up fadump initramfs
Kdump service will create fadump initramfs when needed, but it won't
clean up the fadump initramfs on kernel uninstall. So create a kernel
install hook to do the clean up job.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Lichen Liu <lichliu@redhat.com>
Resolves: bz2139000
Upstream: Fedora
Conflict: None
commit 748eb3a2a6
Author: Kairui Song <kasong@tencent.com>
Date: Sun Jan 9 18:03:35 2022 +0800
spec: only install mkfadumprd for ppc
fadump is a ppc only feature, mkfadumprd is only needed for fadump, drop
it for other arch.
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Kairui Song <kasong@tencent.com>
Signed-off-by: Lichen Liu <lichliu@redhat.com>
Resolves: bz2145087
Conflict: None
commit 6b6187f546f0ddad8ea84d22c3f7ad72133dcfe3
Author: Sourabh Jain <sourabhjain@linux.ibm.com>
Date: Thu Sep 15 14:12:40 2022 +0530
ppc64: remove rma_top limit
Restricting kexec tool to allocate hole for kexec segments below 768MB
may not be relavent now since first memory block size can be 1024MB and
more.
Removing rma_top restriction will give more space to find holes for
kexec segments and existing in-place checks make sure that kexec segment
allocation doesn't cross the first memory block because every kexec segment
has to be within first memory block for kdump kernel to boot properly.
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Resolves: bz2078460
Upstream: Fedora
commit 787b041aab
Author: Pingfan Liu <piliu@redhat.com>
Date: Tue Nov 15 12:00:09 2022 +0800
kdump.conf: use a simple generator script to maintain
This commit has the same motivation as the commit 677da8a "sysconfig:
use a simple generator script to maintain".
At present, only the kdump.conf generated for s390x has a slight
difference from the other arches, where the core_collector asks the
makedumpfile to use "-c" option to compress dump data by each page using
zlib, which is more efficient than lzo on s390x.
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Resolves: bz2060319
Upstream: Fedora
Conflict: None
commit e218128e28
Author: Coiby Xu <coxu@redhat.com>
Date: Thu Sep 8 14:30:02 2022 +0800
Only try to reset crashkernel for osbuild during package install
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2060319
Currently, kexec-tools tries to reset crashkernel when using anaconda to
install the system. But grubby isn't ready and complains that,
10:33:17,631 INF packaging: Configuring (running scriptlet for): kernel-core-5.14.0-70.el9.x86_64 1645746534 03dcd32db234b72440ee6764d59b32347c5f0cd98ac3fb55beb47214a76f33b4
10:34:16,696 INF dnf.rpm: grep: /boot/grub2/grubenv: No such file or directory
grep: /boot/grub2/grubenv: No such file or directory
We only need to try resetting crashkernel for osbuild. Skip it for other
cases. To tell if it's package install instead of package upgrade, make
use of %pre to write a file /tmp/kexec-tools-install when "$1 == 1" [1].
[1] https://docs.fedoraproject.org/en-US/packaging-guidelines/Scriptlets/#_syntax
Reported-by: Jan Stodola <jstodola@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Lichen Liu <lichenliu@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Related: bz2048690
Upstream: Fedora
Conflict: None
commit f6bcd819fc
Author: Coiby Xu <coxu@redhat.com>
Date: Fri Jul 15 15:11:44 2022 +0800
use /run/ostree-booted to tell if scriptlet is running on OSTree system
Resolves: bz2092012
According to the ostree team [1], the existence of /run/ostree-booted
> is the most stable way to signal/check that a system has been
> booted in ostree-style. It is also used by rpm-ostree at
> compose/install time in the sandboxed environment where scriptlets run,
> in order to signal that the package is being installed/composed into
> an ostree commit (i.e. not directly on a live system). See
> 8ddf5f40d9/src/libpriv/rpmostree-scripts.cxx (L350-L353)
> for reference.
By checking the existence of /run/ostree-booted, we could skip trying to
update kernel cmdline during OSTree compose time.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=2092012#c3
Reported-by: Luca BRUNO <lucab@redhat.com>
Suggested-by: Luca BRUNO <lucab@redhat.com>
Fixes: 0adb0f4 ("try to reset kernel crashkernel when kexec-tools updates the default crashkernel value")
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Acked-by: Timothée Ravier <siosm@fedoraproject.org>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Upstream: fedora
Resolves: bz2045949
Resolves: bz2044804
Conflict: none
commit fc1c79ffd2
Author: Tao Liu <ltao@redhat.com>
Date: Sat Oct 8 12:09:08 2022 +0800
Seperate dracut and dracut-squash compressor for zstd
Previously kexec-tools will pass "--compress zstd" to dracut. It
will make dracut to decide whether: a) call mksquashfs to make a
zstd format squash-root.img, b) call cmd zstd to make a initramfs.
Since dracut(>= 057) has decoupled the compressor for dracut and
dracut-squash, So in this patch, we will pass the compressor seperately.
Note:
The is_squash_available && !dracut_has_option --squash-compressor
&& !is_zsdt_command_available case is left unprocessed on purpose.
Actually, the situation when we want to call zstd compression is:
1) If squash function OK, we want dracut to invoke mksquashfs to make
a zstd format squash-root.img within initramfs.
2) If squash function is not OK, and cmd zstd presents, we want dracut
to invoke cmd zstd to make a zstd format initramfs.
is_zstd_command_available check can handle case 2 completely.
However, for the is_squash_available check, it cannot handle case 1
completely. It only checks if the kernel supports squashfs, it doesn't
check whether the squash module has been added by dracut when making
initramfs. In fact, in kexec-tools we are unable to do the check,
there are multiple ways to forbit dracut to load a module, such as
"dracut -o module" and "omit_dracutmodules in dracut.conf".
When squash dracut module is omitted, is_squash_available check will
still pass, so "--compress zstd" will be appended to dracut cmdline,
and it will call cmd zstd to do the compression. However cmd zstd may
not exist, so it fails.
The previous "--compress zstd" is ambiguous, after the intro of
"--squash-compressor", "--squash-compressor" only effect for
mksquashfs and "--compress" only effect for specific cmd.
So for the is_squash_available && !dracut_has_option
--squash-compressor && !is_zsdt_command_available case, we just leave
it to be handled the default way.
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Tao Liu <ltao@redhat.com>
Signed-off-by: Tao Liu <ltao@redhat.com>
Resolves: bz2089871
Upstream: Fedora
Conflict: None
commit da0ca0d205
Author: Coiby Xu <coxu@redhat.com>
Date: Tue Jun 28 14:38:28 2022 +0800
Allow to update kexec-tools using virt-customize for cloud base image
Resolves: bz2089871
Currently, kexec-tools can't be updated using virt-customize because
older version of kdumpctl can't acquire instance lock for the
get-default-crashkernel subcommand. The reason is /var/lock is linked to
/run/lock which however doesn't exist in the case of virt-customize.
This patch fixes this problem by using /tmp/kdump.lock as the lock
file if /run/lock doesn't exist.
Note
1. The lock file is now created in /run/lock instead of /var/run/lock since
Fedora has adopted adopted /run [2] since F15.
2. %pre scriptlet now always return success since package update won't
be blocked
[1] https://fedoraproject.org/wiki/Features/var-run-tmpfs
Fixes: 0adb0f4 ("try to reset kernel crashkernel when kexec-tools updates the default crashkernel value")
Reported-by: Nicolas Hicher <nhicher@redhat.com>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Suggested-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Resolves: bz2081323
Upstream: github.com/makedumpfile/makedumpfile.git
Conflicts: None
commit 6d0d95ecc04a70f8448d562ff0fbbae237f5c929
Author: Kazuhito Hagio <k-hagio-ab@nec.com>
Date: Thu Apr 21 08:58:29 2022 +0900
[PATCH] Avoid false-positive mem_section validation with vmlinux
Currently get_mem_section() validates if SYMBOL(mem_section) is the address
of the mem_section array first. But there was a report that the first
validation wrongly returned TRUE with -x vmlinux and SPARSEMEM_EXTREME
(4.15+) on s390x. This leads to crash failing statup with the following
seek error:
crash: seek error: kernel virtual address: 67fffc2800 type: "memory section root table"
Skip the first validation when satisfying the conditions.
Reported-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Kazuhito Hagio <k-hagio-ab@nec.com>
Reviewed-and-Tested-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Pingfan Liu <piliu@redhat.com>
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Resolves: bz2060824
Upstream: git.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git
Conflicts: None
commit 2e1ec106dc5aac951ba884ebe4cca036e9a2d45f
Author: Sven Schnelle <svens@linux.ibm.com>
Date: Thu Dec 16 12:43:56 2021 +0100
s390: add support for --reuse-cmdline
--reuse-cmdline reads the command line of the currently
running kernel from /proc/cmdline and uses that for the
kernel that should be kexec'd.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Resolves: bz2060824
Upstream: git.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git
Conflicts: None
commit d6516ba4c88f217fe14455db92c60cd0e9af18f8
Author: Sven Schnelle <svens@linux.ibm.com>
Date: Thu Dec 16 12:43:55 2021 +0100
use slurp_proc_file() in get_command_line()
This way the size of the command line that get_command_line() can handle
is no longer fixed.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Resolves: bz2060824
Upstream: git.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git
Conflicts: None
commit 193e51deccc62544f6423eb5e5eefc8a23aad679
Author: Sven Schnelle <svens@linux.ibm.com>
Date: Thu Dec 16 12:43:54 2021 +0100
add slurp_proc_file()
slurp_file() cannot be used to read proc files, as they are returning
a size of zero in stat(). Add a function slurp_proc_file() which is
similar to slurp_file(), but doesn't require the size of the file to
be known.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Resolves: bz2060824
Upstream: git.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git
Conflicts: None
commit 91a3d0e00a5c18ee9bdd2c6c03ac64a6471e2559
Author: Sven Schnelle <svens@linux.ibm.com>
Date: Thu Dec 16 12:43:53 2021 +0100
s390: use KEXEC_ALL_OPTIONS
KEXEC_ALL_OPTIONS could be used instead defining the same
array several times. This makes code easier to maintain when
new options are added.
Suggested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Resolves: bz2060824
Upstream: git.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git
Conflicts: None
commit defb80a20bf1e4d778596ce2447e19d44f31ae5a
Author: Sven Schnelle <svens@linux.ibm.com>
Date: Thu Dec 16 12:43:52 2021 +0100
s390: add variable command line size
Newer s390 kernels support a command line size longer than 896
bytes. Such kernels contain a new member in the parameter area,
which might be utilized by tools like kexec. Older kernels have
the location initialized to zero, so we check whether there's a
non-zero number present and use that. If there isn't, we fallback
to the legacy command line size of 896 bytes.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Resolves: bz2069200
Upstream: git.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git
Conflicts: None
commit f4c59879b830c7d574a953e6ce970ddaf20910d7
Author: Philipp Rudo <prudo@redhat.com>
Date: Wed Mar 23 16:35:36 2022 +0100
util_lib/elf_info: harden parsing of printk buffer
The old printk mechanism (> v3.5.0 and < v5.10.0) had a fixed size
buffer (log_buf) that contains all messages. The location for the next
message is stored in log_next_idx. In case the log_buf runs full
log_next_idx wraps around and starts overwriting old messages at the
beginning of the buffer. The wraparound is denoted by a message with
msg->len == 0.
Following the behavior described above blindly is dangerous as e.g. a
memory corruption could overwrite (parts of) the log_buf. If the
corruption adds a message with msg->len == 0 this leads to an endless
loop when dumping the dmesg. Fix this by verifying that not wrapped
around before when it encounters a message with msg->len == 0.
While at it also verify that the index is within the log_buf and thus
guard against corruptions with msg->len != 0.
The same bug has been reported and fixed in makedumpfile [1].
[1] http://lists.infradead.org/pipermail/kexec/2022-March/024272.html
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Resolves: bz2069200
Upstream: github.com/makedumpfile/makedumpfile.git
Conflicts: goto out_error --> return FALSE
due to missing 64b5b29 ("[PATCH 03/15] remove variable length
array in readpage_kdump_compressed()")
commit 5035c0821f07da3badda645cd0064d4b80e1667d
Author: Philipp Rudo <prudo@redhat.com>
Date: Mon Mar 14 17:04:32 2022 +0100
[PATCH] print error when reading with unsupported compression
Currently makedumpfile only checks if the required compression algorithm
was enabled during build when compressing a dump but not when reading
from one. This can lead to situations where, one version of makedumpfile
creates the dump using a compression algorithm an other version of
makedumpfile doesn't support. When the second version now tries to, e.g.
extract the dmesg from the dump it will fail with an error similar to
# makedumpfile --dump-dmesg vmcore dmesg.txt
__vtop4_x86_64: Can't get a valid pgd.
readmem: Can't convert a virtual address(ffffffff92e18284) to physical address.
readmem: type_addr: 0, addr:ffffffff92e18284, size:390
check_release: Can't get the address of system_utsname.
makedumpfile Failed.
That's because readpage_kdump_compressed{_parallel} does not return
with an error if the page it is trying to read is compressed with an
unsupported compression algorithm. Thus readmem copies random data from
the (uninitialized) cachebuf to its caller and thus causing the error
above.
Fix this by checking if the required compression algorithm is supported
in readpage_kdump_compressed{_parallel} and print a proper error message
if it isn't.
Reported-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-and-tested-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Kazuhito Hagio <k-hagio-ab@nec.com>
Signed-off-by: Philipp Rudo <prudo@redhat.com>
