Commit Graph

14 Commits

Author SHA1 Message Date
Dave Young
57f8e18d17 network dns config fix
In case explict DNS setup in ifcfg file, we should add proper cmdline
for dracut network use.

Add a kdump_setup_dns function to handle this.
v1->v2: vivek: use echo instead of 'echo -n'

Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2012-07-12 11:15:35 +08:00
dyoung@redhat.com
7148c0a30d add s390x netdev setup
s390x netdev need special cmdline to bring up
parse the ifcfg file to append proper cmdline, also add znet dracut module

Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2012-07-05 16:52:12 +08:00
dyoung@redhat.com
a67cebf1bf Cleanup temp file leaved at /tmp/
module_setup.sh removed comment and blank lines of kdump.conf, then install it
to initramfs, but it leaved the /tmp/$$-kdump.conf which should be removed.

Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2012-07-05 16:41:49 +08:00
Cong Wang
f9c56b3f6e Respect bonding mode
Update: use /sys/class/net/bondX/bonding/mode

We should set the mode of the bonding properly
in the second kernel too.

Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Cong Wang <amwang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2012-07-05 16:35:16 +08:00
Cong Wang
469bdf2cae Support dump over vlan tagged bonding
Update: error out vlan over bridge case

This patch adds support for vlan tagged bonding,
in theory, we could support other complex setup as well,
in practice, this is not easy, so just support vlan
tagged bonding, which is the one we support in RHEL6.

Note, this patch depends on the dracut patch:
http://marc.info/?l=initramfs&m=134025049228510&w=2

Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Cong Wang <amwang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2012-07-05 16:34:54 +08:00
Dave Young
4e4a173698 Add kdump_post and kdump_pre support
Original patch is from Amerigo, but it has changed a lot:
remove multi dump
refreshed with latest git for the dump instruction function restructure
fixed the behavior of do_kdump_pre, if kdump_pre fails it will reboot
update the docs
check the existance and executable of kdump_pre/post files,
also check the timestamp of them for rebuilding.

refresh patch,
Address comments from vivek:
s/hush/bash in docs
fix the copy-paste error in kdump post error message
s/reboot\/halt/reboot in kexec-kdump-howto.txt

Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2012-06-14 09:57:30 +08:00
Cong Wang
e720fcdadf add vlan support
This patch depends on the latest dracut in git.
It adds support of dumping over a vlan device.

Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Cong Wang <amwang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2012-06-11 14:03:26 +08:00
Cong Wang
999870558b fix and refactor bond handling code
This patch fixes dumping over a bonding interface,
we should pass ifname= for all its underlying slaves,
which is required by dracut.

And it separates the code into a different function.

Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Cong Wang <amwang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2012-06-11 14:03:12 +08:00
Cong Wang
725dae14ac fix and refactor bridge handling code
This patch fixes dumping over a bridge interface,
we should pass ifname= for all its underlying devices,
which is required by dracut.

And it separates the code into different functions,
for later patches to use.

Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Cong Wang <amwang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2012-06-11 14:02:47 +08:00
Dave Young
21398a5cdd static ip configuration support
Resolves: bz822739

We hardcoded with dhcp in dracut cmdline before.
Fix it by parsing  ifcfg to get the proper proto,
echo proper cmdline for both static and dhcp
[v1->v2]: amwang - handle PREFIX as well

Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Cong Wang <amwang@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2012-05-28 09:49:25 +08:00
Vivek Goyal
e30ad0a4ec kdump: Basic iscsi target dump support (software initiator)
BZ: 822701

This patch implements basic software iscsi dump support. Complex iscsi
setups like ibft etc might not work.

iscsi self configuration logic is currenlty part of kdump module. At some
point of time I would like to see it in dracut iscsi module instead of
kdump module when iscsi and other subsystems become self configuration aware
for general boot.

This patch will require work for complex setups. Some of them are.

- IPV6 support
- IBFT support
- Parsing some more advanced parameters and passing to netroot option.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2012-05-28 09:42:00 +08:00
Vivek Goyal
bf247cb56c kdump: Move network device setup in a separate function
BZ: 822701

This allows to reuse same function from iscsi setup code too. Also makes
code more modular.

[dyoung: add a missed space]

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2012-05-24 13:49:21 +08:00
Dave Young
70dbef8656 Resolves: bz805773
cleanup module_setup.sh, move code blocks to functions.

[v1->v2]: vivek: add kdump_ prefix to kdump functions because dracut
          source this file

Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2012-05-14 10:36:18 +08:00
Dave Young
bbd2e7d30a remove dracut-files.tbz2 [v2]
Resolves: bz816864

currently kexec-tools maintains kdump dracut modules as below dir hierarchy:
 [dave@localhost fedpkg]$ tree kexec-tools/kdump_dracut_modules
 kexec-tools/kdump_dracut_modules
 `-- 99kdumpbase
     |-- kdump.sh
     `-- module-setup.sh

But in kexec-tools.spec, sources line is below:
Source100: dracut-files.tbz2

So we need to manually generate the dracut-files.tbz2, upload it, modify
the sources file which contains the md5sum of these binaies, and then do
the building. The more headache problem is this make local tests of
changes to kdump module hard.

To ease future work, move the files to TOPDIR, cp the sources instead.

Thanks for help from dzickus
[v1->v2]: Also remove dracut-files.tbz2 from sources file
          ChaoWang: add prefix to dracut files
2012-05-03 10:06:05 +08:00