Commit Graph

120 Commits

Author SHA1 Message Date
Dave Young
4d37a55bc1 install core_collector in module-setup.sh
file install code should stay in module-setup.sh, move core_collector installation
code as well.

Note: mkdumpfile is installed twice before, one is dracut cmdline, another is
module_setup.sh. This patch removed the duplicate code in dracut cmdline.

Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2012-07-12 11:15:35 +08:00
Dave Young
9f5af7aca8 install extra_bins in module-setup.sh
moving file install code to module-setup.sh looks better.
This patch move extra_bins installation to module-setup.sh

Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2012-07-12 11:15:35 +08:00
Dave Young
1c38f02031 improve warning message of space checking
For core_collector like makedumpfile use case, it will compress and filter the
vmcore so free space small than memtotal is mostly ok. But we can not guarantee
it will be always ok.

The "there is not enough space" is not accurate, improve it to "there might be
not enough space"

Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2012-07-12 11:15:35 +08:00
Dave Young
ec8e35a790 do not mount root twice
Resolves: bz821997

dracut will mount rootfs for us, so we need not pass root to fstab again here.
Here remove the root-mount line.

This will depends on the root=cmdline is right, by default kdump will
inherit it from /proc/cmdline.

Vivek: add document about the assumption for the root= cmdline issue.

Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2012-07-12 11:15:35 +08:00
Dave Young
88b03bf0ba do not add fstab-sys module in dracut cmdline
fstab-sys module will be added automaticlly when there's --mount passed
So no need to explictly add it in dracut cmdline

Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2012-07-12 11:15:35 +08:00
Dave Young
b14b692242 omit dash module
dash is be default omited in f17, but we use -o in command line so our omit
modules list will overwrite the system configs, so dash will be installed to
initramfs.

Here avoid install dash by adding it to the '-o' list
Also remove dash dependency from rpm spec

Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2012-07-12 11:15:35 +08:00
dyoung@redhat.com
7148c0a30d add s390x netdev setup
s390x netdev need special cmdline to bring up
parse the ifcfg file to append proper cmdline, also add znet dracut module

Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2012-07-05 16:52:12 +08:00
dyoung@redhat.com
a71cead537 add check_size function for fs dump
Resolves: bz806196

Adding check_size function for filesystem dump, also move common code to
top of the file because get_fs_size need know the mount point.

Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2012-07-05 16:39:27 +08:00
dyoung@redhat.com
2cb3c1cbc4 add ssh check_size
check available size of ssh target before dumping
remove unused check_remote()
v2: vivek: add error handling

Resolves: bz806196

Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2012-07-05 16:39:08 +08:00
dyoung@redhat.com
ea5c605d16 blacklist patch apply fix
The original blacklist patch was applied without conflict.
But in fact there's exactly same context with amerigo's original patch and
it's in wrong place!

Moving it to the right switch branch..

Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2012-07-05 16:38:29 +08:00
dyoung@redhat.com
1b30666cac add blacklist option
For the "blacklist" here, it means prevent the kernel modules
from loading into kdump initrd, which is different from RHEL6.

Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2012-06-22 15:38:42 +08:00
Dave Young
b30eb78ab2 raw core_collector fix
1. only append '-F' for default core_collector internally
2. error out if user does not add '-F' for makedumpfile

v1->v2: refresh because of new core collector verify function
v2->v3: optimize the code, remove local variable for default core_collector

Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2012-06-14 09:57:07 +08:00
Dave Young
2697669fa9 ssh core_collector fix
1. add core_collector filter support to ssh dump
2. scp can be specified in kdump.conf
3. error out if no '-F' with makedumpfile
4. add proper explanation and examples to kdump.conf[.5] and kexec-kdump-howto.txt.

v1->v2: add verify_core_collector function
v2->v3: optimize the code, remove local variable for default core_collector

Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2012-06-14 09:56:10 +08:00
Dave Young
7a7ecb150b omit plymouth module
Resolves: bz821997

while root is set to dump target, it can not be unmounted because plymouthd
are holding it. umount failing will cause calling of default_action.

Omit plymouth module to fix this issue.
Also drop "--add dash" or dracut will report error "dash is not found", this
is because default fedora dracut.conf will omit dash.

Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2012-06-06 16:26:32 +08:00
Dave Young
7e82b251c6 mkdumprd: remove --debug
dracut args pass through will be introduced later, remove this firstly.

Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2012-06-06 16:24:32 +08:00
Dave Young
d88c0390b8 mkdumprd: remove noconf
noconf is not supported, remove the --noconf in mkdumprd

Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2012-06-06 16:24:28 +08:00
Dave Young
d6cc7ff7dc makedumprd: remove -d
-d option is not implemented and unused, remove it from mkdumprd

Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2012-06-06 16:24:23 +08:00
Vivek Goyal
015dd4c67c mkdumprd: Start using --hostonly and --add kdumpbase while calling dracut
BZ: 817044

Harald suggested that we use --add kdumpbase instead of -m kdumpbsae. As
-m means only use modules specified on the command line. I am not sure
that kdump will ever know the list of modules it wants to use. It might
be a good idea to let dracut decide it based on --mount option.

Also start using --hostonly to make sure atleast our default dumping to
root disk always works.

I also noticed that with --add and --hostonly initramfs size came down. So
for the time being just bring down the initramfs size.

But it still looks big and this area will require more experimentation and
bug fixing to make sure we are generatiing optimal size images for kdump
purposes and get rid of bloat. I am just beginning to understand dracut,
so expect more churn in this area down the line from me.

I am posting this patch for the bz opened again F18. As it is reducing
initramfs size significantly, I think it is a good idea to commit it
in F17 branch also.

Following is image size comparision.

Dump to root disk.
------------------
vanilla compressed: 13MB
hostonly compressed: 7.5MB

Dump to nfs
-----------
vanilla compressed: 24MB
hostonly compressed: 13MB

Dump over ssh
-------------
vanilla compressed: 23.5 MB
hostonly compressed: 12 MB

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2012-05-02 10:08:18 +08:00
Dave Young
24eaa7da8f port raw dump from rhel6 [v7]
Resolves: bz805783

kdumpctl: save_raw if found vmcore
mkdumprd: checking available size of raw disk
dracut module: do the dumping

Note, add a dir /kdumpscripts for monitor_dd_progress and future
kdump scripts
[v1->v2]: monitor_dd_process become a script instead of a function
          add missed utils
          use pipe with dc
[v2->v3]: Don: fix dd_progress_file typo
          Vivek: move [ -f $conf_file ] earlier
                 don't split keyfile= and [ -f keyfile ]
                 move default core_collector earlier
                 move non-makedumpfile warnings to mkdumprd
                 make check available size a common function
          Amerigo: use less pipe for grep then awk print
                   use shell (( )) instead of dc
          use cut instead of awk
          no need install dc and awk
          make DD_BLKSIZE a variable
          don't add 0755 file in git, chmod in module-setup.sh
[v3->v4]: vivek: kdumpctl multi raw target handling
          monitor_dd_progress- fix wrong size calculation:
          the tail -1 of dd pregress file is in bytes instead of blocks
          only print the whole dd src file size for non-filtered case
          check [ -b raw target device ] before dump
[v4->v5]: vivek: move check [ -b $1 ] before monitor_dd_progress
          remove multi target function
[v5->v6]: vivek: only warning for raw dump of non-makedumpfile core_collector
[v6->v7]: kdumpctl should return 0 when there's no raw target

Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2012-05-02 10:06:51 +08:00
Dave Young
ba0aa24316 Add ssh dump support
Add ssh dump support

changes including below items:
1. sshkey option
2. sshkey propagate
3. fix a bug of  _server ip calculation for dump target string
4. change the prefix of kdump hook from 93 to 01 to avoid dhclient and
   other cleanups happening before us
5. enable network with dracut cmdline rd.neednet=1 when there's network
   target config

[v1 - v2]:
Only check_ssh_target when there's ssh dump target in kdump config file

[v2 -> v3]
style fixes: trailing spaces and space before tab indent
remove set -x
simply check_ssh_target
use awk to get sshkey option value
change pivot hook order to 0000

Signed-off-by: Dave Young <dyoung@redhat.com>
2012-02-22 14:12:57 +08:00
Cong Wang
f51fd99344 Really upload the dracut module this time 2012-01-25 17:21:43 +08:00
Cong Wang
c461ec7057 Fix various bugs for nfs dump 2012-01-25 16:58:35 +08:00
Cong Wang
2630148dc7 Handle rootfs correctly 2012-01-25 12:18:51 +08:00
Cong Wang
a0f1142b60 Fix add_dracut_arg in mkdumprd 2012-01-10 22:34:47 +08:00
Cong Wang
113404857a Update kdump dracut module with the latest dracut kdump branch 2012-01-10 13:28:27 +08:00
Cong Wang
2d16a847d4 Use an array to hold arguments to avoid quote problems 2011-12-16 18:06:45 +08:00
wangcong
005c06fa9f Update kdump dracut module to use the latest dracut feature 2011-12-16 14:21:02 +08:00
Amerigo Wang
c5ebc6337d mkdumprd: move module inclusion code to module-setup.sh 2011-08-01 17:19:24 +08:00
Amerigo Wang
108f6ac2cc mkdumprd: use shutdown module of dracut to handle reboot/shutdown/halt. 2011-07-28 22:50:43 +08:00
Amerigo Wang
52dbdacb5f wait for loginit 2011-07-27 20:37:49 +08:00
Amerigo Wang
75b0166343 mkdumprd: don't use consolehelper 2011-07-27 19:45:59 +08:00
Amerigo Wang
1345d1582d mkdumprd: support core_collector and extran_bins 2011-07-25 18:02:37 +08:00
Amerigo Wang
c5f74a28e8 Bypass -d option. 2011-07-21 21:04:09 +08:00
Amerigo Wang
57ae098fd0 Update initramfs code. 2011-07-21 18:51:33 +08:00
Neil Horman
fe18fead61 Resolves: bz 710744 2011-06-06 15:43:54 -04:00
Neil Horman
678b7b882f Fix misuse of basename in mkdumprd
Resolves bz: 683769
2011-03-28 11:08:50 -04:00
Neil Horman
2fb552037c remove emitdms call and code as its no longer needed 2011-03-10 11:04:43 -05:00
Neil Horman
771517d3a8 Resolves: bz 645734 2010-10-22 06:56:33 -04:00
Neil Horman
be84f84fee Resolves: bz 635893 2010-09-22 06:58:35 -04:00
Lubomir Rintel
dc002368a1 Pull EL6 kdump fixes into Rawhide Resolves: 597588 2010-06-13 19:20:48 +00:00
Neil Horman
68d2a8081e Resolves: bz 572569 2010-03-11 16:06:06 +00:00
Neil Horman
66d844ee90 Resolves: bz 566135 2010-02-17 16:49:26 +00:00
Neil Horman
5a44a04f67 Resolves: bz519767 2009-12-01 17:56:44 +00:00
Neil Horman
0376606424 Resolves: bz 505701 2009-06-15 16:58:42 +00:00
Neil Horman
64c7c7b164 Resolves: bz 494416 2009-04-07 13:57:21 +00:00
Neil Horman
94baf10fb4 Resoves: bz 493707 2009-04-03 20:06:29 +00:00
Neil Horman
352a954156 Resolves: bz 469001 2008-10-29 13:37:34 +00:00
Neil Horman
ced35688d2 Resolves: bz 455998 2008-08-27 11:26:34 +00:00
Neil Horman
b4a96a8bbc Resolves: bz 443878) 2008-07-14 14:52:37 +00:00
Neil Horman
51a3406429 Resolves: bz 443878 2008-06-11 10:51:51 +00:00
Neil Horman
558bea7d40 Mass Update of RHEL5 patches 2008-06-05 15:18:53 +00:00
Neil Horman
f178fa14a0 Resolves: bz 443878 2008-04-24 17:09:32 +00:00
Neil Horman
dbc5e5bd2e Bunches of bugfixes from RHEL5 + bz 428684 2008-02-22 12:40:20 +00:00
Neil Horman
79df4118e8 Resolves: bz 433350 2008-02-19 20:01:55 +00:00
Neil Horman
4a8369b55e Resolves: bz 252170 2007-08-22 15:14:11 +00:00
Neil Horman
9611e10df6 Resolves: bz 250341 2007-08-01 17:44:53 +00:00
Neil Horman
7c84ec10fe Resolves: bz248797 2007-07-19 12:33:57 +00:00
Neil Horman
d60d8254be Resolves: bz222911 2007-06-19 11:05:47 +00:00
Neil Horman
42b55e6012 Resolves: bz215056 2007-03-15 17:36:03 +00:00
Neil Horman
88c0ba0f32 Updating kdump.init and mkdumprd to equiv. of -163.el5 2007-01-25 20:13:28 +00:00
Neil Horman
d3c4b95f8a Updating fc7 with all RHEL5 work 2006-12-15 21:05:01 +00:00
Neil Horman
a5a9abd60f updating mkdumprd to use ifup/down in busybox and to use chkconfig properly 2006-09-28 16:16:04 +00:00
Neil Horman
27e9206ed0 final updates for busybox conversion 2006-09-23 01:49:08 +00:00
Neil Horman
31a04fb720 further updates to mkdumprd for scp dumping with busybox 2006-09-22 19:09:02 +00:00
Neil Horman
f9718a1ad6 checking in initial changes to convert kdump to use busybox rather than
nash
2006-09-18 17:59:46 +00:00
Neil Horman
ae7dce0148 updating mkdumprd 2006-08-31 13:23:33 +00:00
Neil Horman
91d1880e3e fixing kcp.c typo and making scp work in mkdumprd 2006-08-30 20:34:16 +00:00
Neil Horman
3060ffe3d7 updating kexec-tools with new kcp utiltiy 2006-08-24 11:55:28 +00:00
Neil Horman
19eed8f6b0 fixing several typo bugs 2006-08-18 17:00:45 +00:00
Neil Horman
ea179a207a adding kexec frontend 2006-07-20 03:36:18 +00:00