Resolves: https://issues.redhat.com/browse/RHEL-38358
Upstream: kdump-utils
commit 247c7a5f39b305f9a83bad2d936d00237165b7e0
Author: Mamoru Nishibe (Fujitsu) <nishibe.mamoru@fujitsu.com>
Date: Wed Apr 24 08:11:12 2024 +0000
mkdumprd: Fix makedumpfile parameter check.
If only "makedumpfile" is written in "core_collector" of /etc/kdump.conf
and try to run makedumpfile without options,
"makedumpfile --check-params" fails and terminates abnormally.
# grep ^core_collector /etc/kdump.conf
core_collector makedumpfile
# /usr/bin/kdumpctl start
:
Commandline parameter is invalid.
Try `makedumpfile --help' for more information.
kdump: makedumpfile parameter check failed.
kdump: mkdumprd: failed to make kdump initrd
kdump: Starting kdump: [FAILED]
On the other hand, "makedumpfile --check-params" works fine without any options.
# makedumpfile --check-params vmcore dumpfile
# echo $?
0
In addition, before verify_core_collector() was implemented,
initial RAM for kdump was successfully created using only "core_collector makedumpfile".
I consider it a regression.
This is due to a parameter extraction error in verify_core_collector().
Fix it to correctly extract only the options as follows.
Fixes: a1c28126 ("mkdumprd: Use makedumpfile --check-params option")
Signed-off-by: Mamoru Nishibe <nishibe.mamoru@fujitsu.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Resolves: bz2185794
Upstream: Fedora
Conflicts: None
commit e42a823dae
Author: Coiby Xu <coxu@redhat.com>
Date: Thu Jun 1 16:05:05 2023 +0800
mkdumprd: Use the correct syntax to redirect the stderr to null
A space was added by mistake and unfortunately fips-mode-setup refuses
an extra parameter,
# fips-mode-setup --is-enabled 2 > /dev/null
# echo $?
2
# fips-mode-setup --is-enabled 2
Check, enable, or disable the system FIPS mode.
usage: /usr/bin/fips-mode-setup --enable|--disable [--no-bootcfg]
usage: /usr/bin/fips-mode-setup --check
usage: /usr/bin/fips-mode-setup --is-enabled
So in this case mkdumprd can never detect if FIPS is enabled. Fix this
mistake.
Fixes: 443a43e0 ("mkdumprd: call dracut with --add-device to install the drivers needed by /boot partition automatically for FIPS")
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Tao Liu <ltao@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Resolves: bz2185794
Upstream: Fedora
Conflicts: small change
commit 443a43e075
Author: Coiby Xu <coxu@redhat.com>
Date: Wed May 24 12:01:45 2023 +0800
mkdumprd: call dracut with --add-device to install the drivers needed by /boot partition automatically for FIPS
Currently, kdump doesn't work on many FIPS-enabled systems including
Azure, ESXI, Hyper, POWER and etc. When FIPS is enabled, it needs to
access /boot//.vmlinuz-xxx.hmac to verify the integrity of the kernel.
However, on those systems, /boot fails to be mounted due to a lack of
fs and block device drivers and the system just halted after failing to
verify the integrity of the kernel. For example, on Hyper-V, sd_mod, sg,
scsi_transport_fc, hv_storvsc and hv_vmbus need to be installed in order
for /boot to be mounted.
mkdumprd calls dracut with the --no-hostonly-default-device. Following
the documentation (man dracut),
--no-hostonly-default-device
Do not generate implicit host devices like root, swap, fstab, etc.
Use "--mount" or "--add-device" to explicitly add devices as needed
this patch uses "--add-device" to explicitly add the device of /boot.
Note there is already an attempt to fix it in dracut's 01fips module
i.e. via the commit 83651776 ("fips: ensure fs module for /boot is
installed"). Unfortunately it only installs the file system driver e.g.
xfs.
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Resolves: bz2219378
Upstream: RHEL-ONLY
Conflict: None
The commit 68d02c2a casused a regression that mount sysroot will fail in
the kdump kernel. Since that commit only fixed a print issue, revert it.
This issue is related to a systemd bug which has been fixed by this PR:
https://github.com/systemd/systemd/pull/23893, before these patches are
backported to RHEL-8, we should keep the nofail and x-systemd.before
options.
Fixes: 68d02c2a
(Revert "Append both nofail and x-systemd.before to kdump mount target")
Signed-off-by: Lichen Liu <lichliu@redhat.com>
Resolves: bz1958587
Upstream: Fedora
Conflict: 1. RHEL8's mkdumprd has different dracut_args from upstream's.
2. RHEL8's kdump_install_net is different from upstream's and
we should install needed NIC drivers in the end.
commit a65dde2d10
Author: Coiby Xu <coxu@redhat.com>
Date: Thu May 19 11:39:25 2022 +0800
Reduce kdump memory consumption by only installing needed NIC drivers
Even after having asked NM to stop managing a unneeded NIC, a NIC driver
may still waste memory. For example, mlx5_core uses a substantial amount
of memory during driver initialization,
======== Report format module_summary: ========
Module mlx5_core using 350.2MB (89650 pages), peak allocation 367.4MB (94056 pages)
Module squashfs using 13.1MB (3360 pages), peak allocation 13.1MB (3360 pages)
Module overlay using 2.1MB (550 pages), peak allocation 2.2MB (555 pages)
Module dns_resolver using 0.9MB (219 pages), peak allocation 5.2MB (1338 pages)
Module mlxfw using 0.7MB (172 pages), peak allocation 5.3MB (1349 pages)
======== Report format module_summary END ========
======== Report format module_top: ========
Top stack usage of module mlx5_core:
(null) Pages: 89650 (peak: 94056)
ret_from_fork (0xffffda088b4165f8) Pages: 60007 (peak: 60007)
kthread (0xffffda088b4bd7e4) Pages: 60007 (peak: 60007)
worker_thread (0xffffda088b4b48d0) Pages: 60007 (peak: 60007)
process_one_work (0xffffda088b4b3f40) Pages: 60007 (peak: 60007)
work_for_cpu_fn (0xffffda088b4aef00) Pages: 53906 (peak: 53906)
local_pci_probe (0xffffda088b9e1e44) Pages: 53906 (peak: 53906)
probe_one mlx5_core (0xffffda084f899cc8) Pages: 53518 (peak: 53518)
mlx5_init_one mlx5_core (0xffffda084f8994ac) Pages: 49756 (peak: 49756)
mlx5_function_setup.constprop.0 mlx5_core (0xffffda084f899100) Pages: 44434 (eak: 44434)
mlx5_satisfy_startup_pages mlx5_core (0xffffda084f8a4f24) Pages: 44434 (peak: 44434)
mlx5_function_setup.constprop.0 mlx5_core (0xffffda084f899078) Pages: 5285 (peak: 5285)
mlx5_cmd_init mlx5_core (0xffffda084f89e414) Pages: 4818 (peak: 4818)
mlx5_alloc_cmd_msg mlx5_core (0xffffda084f89aaa0) Pages: 4403 (peak: 4403)
This memory consumption is completely unnecessary when kdump doesn't need
this NIC. Only install needed NIC drivers to prevent this kind of waste.
Note
1. this patch depends on [1] to ask dracut to not install NIC drivers.
2. "ethtool -i" somehow fails to get the vlan driver
3. team.ko doesn't depend on the team mode drivers so we need to install
the team mode drivers manually.
[1] https://github.com/dracutdevs/dracut/pull/1789
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Thomas Haller <thaller@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Resolves: bz2164929
Upstream: Fedora
Conflict: Missing upstream commit
94a7b4("Always drop nofail or nobootwait options")
commit 0843c70672
Author: Kairui Song <kasong@redhat.com>
Date: Wed Jan 13 17:12:18 2021 +0800
Revert "Append both nofail and x-systemd.before to kdump mount target"
That commit is trying to workaround a kernel VFS bug. Now,
the VFS issue should have been fixed in all recent releases, so
remove this workaround.
This reverts commit 539bff4083.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
Signed-off-by: Lichen Liu <lichliu@redhat.com>
Pingfan Liu
Coiby Xu
Lichen Liu
CentOS Sources
James Antill