Commit Graph

50 Commits

Author SHA1 Message Date
Kairui Song
bde4b7af3b No longer treat atomic/silverblue specially
This commit remove almost all special workaround for atomic, and treat
all bind mounts in any environment equally.

Use a helper get_bind_mount_directory_from_path to get the bind mount
source path of given path.

is_atomic function now only used to determine the right /boot path
for atomic/silverblue environment.

And remove get_mntpoint_from_path(), it's the only function that never
ignore bind mount, and it have no caller after this clean up.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
2020-03-30 22:06:37 +08:00
Kairui Song
b5b0b90521 mkdumprd: Simplify handling of user specified target
For user specified target, the config value is used as the dump target,
and SAVE_PATH (path in kdump.conf) value is used as the dump path within
the dump target, no need to do anything extra with the path value.

Current code logic is not only complicated, it also wrongly generate
an redundantly long path in atomic/silverblue environment.

The right way is only check two things, and do nothing else:

 1. The path exists within the target;
 2. The target is large enough to hold to contain the vmcore.

Currently checking the target still requires it to be mounted so it will
error out if it's not mounted. Will implement some auto mount as next
step.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
2020-03-30 22:06:28 +08:00
Kairui Song
fd7e7be483 mkdumprd: Use get_save_path instead of parsing config
get_save_path provides default value fail back and error check, no need
to repeat it again.

Also remove a redundant echo and grep in get_save_path

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
2020-03-30 22:06:07 +08:00
HAGIO KAZUHITO(萩尾 一仁)
64d30f54b9 kdump-lib.sh: Fix is_user_configured_dump_target()
Currently, is_user_configured_dump_target() doesn't work as expected
due to lack of grep -E option.

As a result, kdump service with a ssh dump configuration can unnecessarily
fail to start due to the non-existence of a directory at where the path
option specifies on the local system:

  kdumpctl[9760]: Rebuilding /boot/initramfs-5.4.19-200.fc31.x86_64kdump.img
  kdumpctl[9760]: Dump path /var/crash/ssh does not exist.
  kdumpctl[9760]: mkdumprd: failed to make kdump initrd
  kdumpctl[9760]: Starting kdump: [FAILED]

Signed-off-by: Kazuhito Hagio <k-hagio-ab@nec.com>
Acked-by: Kairui Song <kasong@redhat.com>
2020-03-12 23:32:25 +08:00
Lianbo Jiang
6a20bd5447 kdump-lib: switch to the kexec_file_load() syscall on x86_64 by default
UEFI Secure boot is a signature verification mechanism, designed to
prevent malicious code being loaded and executed at the early boot
stage. This makes sure that code executed is trusted by firmware.

Previously, with kexec_file_load() interface, kernel prevents unsigned
kernel image from being loaded if secure boot is enabled. So kdump will
detect whether secure boot is enabled firstly, then decide which interface
is chosen to execute, kexec_load() or kexec_file_load(). Otherwise unsigned
kernel loading will fail if secure boot enabled, and kexec_file_load() is
entered.

Now, the implementation of kexec_file_load() is adjusted in below commit.
With this change, if CONFIG_KEXEC_SIG_FORCE is not set, unsigned kernel
still has a chance to be allowed to load under some conditions.

commit 99d5cadfde2b ("kexec_file: split KEXEC_VERIFY_SIG into KEXEC_SIG
and KEXEC_SIG_FORCE")

And in the current Fedora, the CONFIG_KEXEC_SIG_FORCE is not set, only the
CONFIG_KEXEC_SIG and CONFIG_BZIMAGE_VERIFY_SIG are set on x86_64 by default.
It's time to spread kexec_file_load() onto all systems of x86_64, including
Secure-boot platforms and legacy platforms. Please refer to the following
form.

.----------------------------------------------------------------------.
| .                    |     signed kernel     |    unsigned kernel    |
|    .      types      |-----------------------|-----------------------|
|       .              |Secure boot|  Legacy   |Secure boot|  Legacy   |
|          .           |-----------|-----------|-----------|-----------|
| options     .        | prev| now | prev| now |     |     | prev| now |
|                .     |(file|(file|(only|(file| prev| now |(only|(file|
|                    . |load)|load)|load)|load)|     |     |load)|load)|
|----------------------|-----|-----|-----|-----|-----|-----|-----|-----|
|KEXEC_SIG=y           |     |     |     |     |     |     |     |     |
|SIG_FORCE is not set  |succ |succ |succ |succ |  X  |  X  |succ |succ |
|BZIMAGE_VERIFY_SIG=y  |     |     |     |     |     |     |     |     |
|----------------------|-----|-----|-----|-----|-----|-----|-----|-----|
|KEXEC_SIG=y           |     |     |     |     |     |     |     |     |
|SIG_FORCE is not set  |     |     |     |     |     |     |     |     |
|BZIMAGE_VERIFY_SIG is |fail |fail |succ |fail |  X  |  X  |succ |fail |
|not set               |     |     |     |     |     |     |     |     |
|----------------------|-----|-----|-----|-----|-----|-----|-----|-----|
|KEXEC_SIG=y           |     |     |     |     |     |     |     |     |
|SIG_FORCE=y           |succ |succ |succ |fail |  X  |  X  |succ |fail |
|BZIMAGE_VERIFY_SIG=y  |     |     |     |     |     |     |     |     |
|----------------------|-----|-----|-----|-----|-----|-----|-----|-----|
|KEXEC_SIG=y           |     |     |     |     |     |     |     |     |
|SIG_FORCE=y           |     |     |     |     |     |     |     |     |
|BZIMAGE_VERIFY_SIG is |fail |fail |succ |fail |  X  |  X  |succ |fail |
|not set               |     |     |     |     |     |     |     |     |
|----------------------|-----|-----|-----|-----|-----|-----|-----|-----|
|KEXEC_SIG is not set  |     |     |     |     |     |     |     |     |
|SIG_FORCE is not set  |     |     |     |     |     |     |     |     |
|BZIMAGE_VERIFY_SIG is |fail |fail |succ |succ |  X  |  X  |succ |succ |
|not set               |     |     |     |     |     |     |     |     |
 ----------------------------------------------------------------------
Note:
[1] The 'X' indicates that the 1st kernel(unsigned) can not boot when the
    Secure boot is enabled.

Hence, in this patch, if on x86_64, let's use the kexec_file_load() only.
See if anything wrong happened in this case, in Fedora firstly for the
time being.

Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2020-02-06 21:57:14 +08:00
Kairui Song
b76c567325 kdump-lib.sh: Fix is_nfs_dump_target
Previously is_nfs_dump_target didn't cover the case that 'path <value>'
where <value> points to a nfs mount point. This function is never used
in first kernel before so so far it worked.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
2020-01-03 16:35:12 +08:00
Kairui Song
03111c797b Always use get_save_path to get the 'path' option
This help deduplicate the code. Use a single function instead of
repeat the same logic.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
2020-01-03 16:35:07 +08:00
Kairui Song
d10f202996 kdump-lib: Don't abuse echo, and clean up
Some of echo $(...) code segment is pointless, just call the command
directly, and remove some useless if / return statement.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
2020-01-03 16:34:34 +08:00
Yuval Turgeman
4714c7c8a3 kdump-lib: strip grub device from kdump_bootdir
When trying to setup kdump for fedora-coreos, kdumpctl start fails to
find the correct boot directory since BOOT_IMAGE start with the grub
device name

Signed-off-by: Yuval Turgeman <yturgema@redhat.com>
2019-09-24 12:19:43 +03:00
Kairui Song
75d9132417 Get rid of duplicated strip_comments when reading config
When reading kdump configs, a single parsing should be enough and this
saves a lot of duplicated striping call which speed up the total load
speed.

Speed up about 2 second when building and 0.1 second for reload in my
tests.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2019-05-20 16:56:28 +08:00
Kazuhito Hagio
cc95f0a744 Add failure_action as alias of default and make default obsolete
In preparation for adding 'final_action' option, since it's confusing
to have the 'final_action' and 'default' options at the same time,
this patch introduces 'failure_action' as an alias of the 'default'
option to /etc/kdump.conf, and makes 'default' obsolete to be removed
in the future.

Also, the "default action" term is renamed to "failure action".

Signed-off-by: Kazuhito Hagio <k-hagio@ab.jp.nec.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Lianbo Jiang <lijiang@redhat.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Acked-by: Bhupesh Sharma <bhsharma@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
2019-01-22 17:57:53 +08:00
Lianbo Jiang
b1fbeebd08 move some common functions from kdumpctl to kdump-lib.sh
we move some common functions from kdumpctl to kdump-lib.sh, the
functions could be used in other modules, such as early kdump.
It has no bad effect.

Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Reviewed-by: Kazuhito Hagio <khagio@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2018-05-29 10:18:40 +08:00
Dave Young
2884fed616 Revert "dracut-module-setup.sh: pass correct ip= param for ipv6"
This reverts commit 2f4149f276.

It is not proved to be right to get auto6 or dhcpv6 in 1st kernel,
pingfan is working on a dracut fix to do some fallback in 2nd kernel initramfs.
So revert this commit
2018-05-09 14:21:51 +08:00
Pingfan Liu
2f4149f276 dracut-module-setup.sh: pass correct ip= param for ipv6
Kdump always use _proto=dhcp for both ipv4 and ipv6.  But for ipv6
the dhcp address assignment is not like ipv4, there are different ways
for it, stateless and stateful, see below document:
https://fedoraproject.org/wiki/IPv6Guide

In case stateless, kernel can do the address assignment, dracut use
_proto=auto6;  for stateful case, dracut use _proto=dhcp6.

We do not see bug reports before because for the most auto6 cases
kernel assign ip address before dhclient, kdump just happened to work.

Here we use auto6 if possible first. And we take the assumption that
host use auto6 if /proc/sys/net/ipv6/conf/$netdev/autoconf is enabled

Signed-off-by: Pingfan Liu <piliu@redhat.com>
2018-03-15 10:06:51 +08:00
Xunlei Pang
e067d77dfc mkdumprd: apply dracut "--hostonly-cmdline" and "--no-hostonly-default-device"
Dracut has "--hostonly-cmdline" which can generate cmdlines(if any)
regarding the dump target, it's an existing way for us to use to
simplify the code. E.g. We already removed generate_lvm_cmdlines(),
to use "--hostonly-cmdline".

But "--hostonly-cmdline" has other issues(e.g. BZ1451717), it adds
needless devices for kdump like root device.

Now dracut supports "--no-hostonly-default-device" which enables
us to only add the kdump target, which can avoid needless devices
being recognized under kdump. Thus "--hostonly-cmdline" side effects
can be avoided with the help of "--no-hostonly-default-device".

This patch applies dracut's "--hostonly-cmdline" together with
"--no-hostonly-default-device" to achieve above-mentioned purpose.

Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2017-09-06 15:40:04 +08:00
Xunlei Pang
d5fe9022d0 kdumpctl: move is_fadump_capable() to kdump-lib.sh
Make is_fadump_capable() a library function, as we will need
it in mkdumprd.

Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2017-09-06 15:39:23 +08:00
Xunlei Pang
8250f23c10 Revert "mkdumprd: omit crypt when there is no crypt kdump target"
This reverts commit 54a5bcc4ee.

We are going to add "--no-hostonly-default-device" dracut argument
in the following patch.

With the help of "--no-hostonly-default-device", dracut only
adds the dump target as host devices, which naturally guarantees
only required dracut modules being selected.

Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2017-09-06 15:38:09 +08:00
Xunlei Pang
54a5bcc4ee mkdumprd: omit crypt when there is no crypt kdump target
Resolves: bz1451717
https://bugzilla.redhat.com/1451717

When there is no crypt related kdump target, we can safely
omit "crypt" dracut module, this can avoid the pop asking
disk password during kdump boot in some cases.

This patch introduces omit_dracut_modules() before calling
dracut, we can omit more modules to reduce initrd size in
the future.

We don't want to omit any module for fadump, thus we move
is_fadump_capable() into kdump-lib.sh as a helper to use.

Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2017-07-14 14:54:31 +08:00
Xunlei Pang
3ee00cd384 kdump-lib.sh: introduce get_kdump_targets()
Resolves: bz1451717
https://bugzilla.redhat.com/1451717

We need to know all the kdump targets including the dump
target and root in case of "dump_to_rootfs".

This is useful for us to do some extra work related to the
type of different targets.

Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2017-07-14 14:54:06 +08:00
Xunlei Pang
1bc78e025f kdump-lib.sh: fix improper get_block_dump_target()
Resolves: bz1451717
https://bugzilla.redhat.com/1451717

This patch improves get_block_dump_target as follows:
-Consider block device in the special "--dracut-args --mount ..."
 in get_user_configured_dump_disk().
-Consider save path instead of root fs in get_block_dump_target(),
 and move it into kdump-lib.sh because we will have another user
 in the following patch.
-For nfs/ssh dumping, there is no need to check the root device.
-Move get_save_path into kdump-lib.sh.

After this patch, get_block_dump_target() can always return the
correct block dump target specified.

Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2017-07-14 14:53:43 +08:00
Pingfan Liu
14ec322b4b kdump-lib.sh: fix incorrect usage with pipe as input for grep -q in is_pcs_fence_kdump()
For -q option, as man grep says:  Exit immediately with zero status if
any match is found, even if an error was detected.
So when matching, the read side of pipe is closed by "grep -q", while
the write side still try to write more data, which cause SIGPIPE to the
process, and the shell can not exit with 0. It depends on the kernel's
implementation of pipe to decide how much data written by the producer
can trigger the bug.

Bash test script:
  #!/bin/sh
  set -o pipefail
  dd if=/dev/zero of=text.file bs=1M count=1
  sed -i '1s/^/keyword /' text.file
  cat text.file | grep -q keyword
  echo $?

Notice the "set -o pipefail" is set by dracut, so
mkdumprd -> dracut -> dracut-module-setup.sh -> is_pcs_fence_kdump()
trigger the bug.

Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Acked-by: Pratyush Anand <panand@redhat.com>
2017-03-08 13:07:20 +08:00
Dave Young
631d979eb3 drop dracut duplicate functions
We maintained several kdump specific functions which are duplicate with the
similar versions in dracut,  Dracut upstream splitted dracut init stuff from
dracut-functions.sh so that we can source it now.

Notes about kdump_get_presistent_dev:
Dracut now has a persistent_policy feature, for kdump when we dump to
raw disks we do not care the filesystem uuid and labels so we prefer to
search disk id instead. For raw disk set the persistent_policy before calling
get_persistent_dev ensure kdump logic still work.

Tested filesystem and raw dump in kvm guests.

[Xunlei: drop other functions other than get_persistent_dev.]

Signed-off-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Xunlei Pang <xlpang@redhat.com>
2016-11-28 10:41:22 +08:00
Pratyush Anand
4db9e59e89 kdumpctl: fix target identification for systems without initrd
We get following error on the systems that have everything built-in and no
initrd is used.

	Kernel dev name of /dev/root is not found.
	Dump target /dev/root is probably not mounted.

It happens because `df $path` gets /dev/root from /proc/self/mountinfo.

Fix this by identifying real target device when `df $path` returns
Filesystem as /dev/root.

Reported-and-tested-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Pratyush Anand <panand@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2016-09-16 15:40:48 +08:00
Xunlei Pang
74c6f46429 Support special mount information via "dracut_args"
There are some complaints about nfs kdump that users must mount
nfs beforehand, which may cause some overhead to nfs server.
For example, there're thounsands of diskless clients deployed with
nfs dumping, each time the client is boot up, it will trigger
kdump rebuilding so will mount nfs, thus resulting in thousands
of nfs request concurrently imposed on the same nfs server.

We introduce a new way of specifying mount information via the
already-existent "dracut_args" directive(so avoid adding extra
directives in /etc/kdump.conf), we will skip all the filesystem
mounting and checking stuff for it. So it can be used in the
above-mentioned nfs scenario to avoid severe nfs server overhead.

Specifically, if there is any "--mount" information specified via
"dracut_args" in /etc/kdump.conf, always use it as the final mount
without any validation(mounting or checking like mount options,
fs size, etc), so users are expected to ensure its correctness.

NOTE:
-Only one mount target is allowed using "dracut_args" globally.
-Dracut will create <mountpoint> if it doesn't exist in kdump kernel,
 <mountpoint> must be specified as an absolute path.
-Users should do a test first and ensure it works because kdump does
 not prepare the mount or check all the validity.

Reviewed-by: Pratyush Anand <panand@redhat.com>
Suggested-by: Dave Young <dyoung@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
2016-08-26 14:03:48 +08:00
Pratyush Anand
3095c3741f mkdumprd: Add dracut watchdog module as default option
If dracut watchdog module is enabled then, it includes kernel watchdog
module of active watchdog device in initramfs.

kdump.conf has an option to modify dracut_args. So, if an user passes "-a
watchdog" in dracut_args then dracut will add kernel watchdog module of
active watchdog device in initramfs.

Since, kexec-tools always requires to add kernel watchdog module of active
watchdog device in initramfs, therefore even when an user does not pass any
watchdog option and there exists at least one active watchdog device then
also kexec-tools adds "-a watchdog" in dracut args.

Therefore, if an user does not want to add kernel watchdog module in
initramfs then the person must pass "-o watchdog" in dracut_args.

Signed-off-by: Pratyush Anand <panand@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2016-07-21 13:56:19 +08:00
Pratyush Anand
81f2c9ea6f get_persistent_dev(): fix name contention with dracut's similar function
Resolves: BZ1348898

dracut-functions.sh defines a get_persistent_dev(). Earlier, we had another
local get_persistent_dev() in mkdumprd, however that was moved to
kdump-lib.sh, so that it can be reused in kdumpctl.

Since, dracut-module-setup.sh (which is dracut's
99kdumpbase/module-setup.sh) sources kdump-lib.sh. Therefore, once dracut
will execute 99kdumpbase module, it's own get_persistent_dev() function is
overwritten by kdump's version. If any other dracut module calls
get_persistent_dev() thereafter then, kdump's version is executed, which was
not expected.

Therefore rename kdump's get_persistent_dev() as kdump_get_persistent_dev()
to avoid any name contention.

Signed-off-by: Pratyush Anand <panand@redhat.com>
Acked-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2016-06-28 03:28:47 +08:00
Xunlei Pang
65b0f80a5c kdump-lib: Add get_ifcfg_filename() to get the proper ifcfg file
Previously, we assumed the ifcfg file of a network "interface" is
"/etc/sysconfig/network-scripts/ifcfg-<interface>", but actually
it is not the case.

For example, for network interface "enp0s25", we are able to
generate like "/etc/sysconfig/network-scripts/ifcfg-enp0s25-test"
for it via network-manager.

The "suffix" in "ifcfg-<suffix>" is actually a "configuration"
name not "interface" name, though normally we use the "interface"
name as its "configuration" name. You can refer to "man ifup"
for some detail.

So, this patch adds some assistant helpers to acquire the right
ifcfg file for an interface. Borrow some logic from script below:
"/etc/sysconfig/network-scripts/network-functions"

Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2016-06-06 13:03:18 +08:00
Pratyush Anand
d1424f3f66 mkdumprd: move to_dev_name() & get_persistent_dev() to kdump-lib.sh
to_dev_name() and get_persistent_dev() can be used by function in kdumpctl.
Therefore moving them to kdump-lib.sh.

No functional changes.

Signed-off-by: Pratyush Anand <panand@redhat.com>
Acked-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Baoquan He <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2016-05-12 09:53:51 +08:00
Minfei Huang
c994a80698 dracut-module-setup: Support the network for ipv6 protocol
Previously, Kdump will save route to setup the network route in the 2nd
kernel for ipv4 protocol. To support ipv6 protocol, make Kdump fetch
correct nexthop, since the ruturning format is different.

In order to enhance kdump to support ipv6, support the static ip for
ipv6 protocol, which ipv4 has supported already.

Introduce a new lib function get_remote_host which is used to factor out
the ip address(ipv4 or ipv6) and hostname in /etc/kdump.conf.

Introduce a new lib function is_ipv6_address which is used to make sure
whether the passed ip address is ipv4 or ipv6.

Introduce a new lib function is_hostname which is used to confirm
whether the passed parameter is hostname, not the ip address.

Introduce a new function get_ip_route_field which is used to factor out
the specified string in ip route info.

Due to the different format between ipv4 and ipv6 protocol, quote the
ipv6 address with bracket "[]" to make dracut notify.

Signed-off-by: Minfei Huang <mhuang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2015-07-28 12:42:17 +08:00
Dave Young
977d20cd50 Revert commit 63476302
The ipv6 patchset is still under review, previously the commit was mistakenly
merged, thus let's revert it.

Revert "dracut-kdump: Use proper the known hosts entry in the file known_hosts"

This reverts commit 63476302aa.

Conflicts:
	kdump-lib.sh

Signed-off-by: Minfei Huang <mhuang@redhat.com>
Signed-off-by: Dave Young <dyoung@redhat.com>
2015-06-26 10:14:14 +08:00
Minfei Huang
7acaa304f6 Fix the warning if the target path is bind mount in Atomic
kdump will raise the warning in Atomic, if the path is bind mounted
directory. The reason why causes this issue is kdump cannt parse the
bind mounted directory.

To correct dumping target, we can construct the real dumping path in
Atomic, which contains two part, one bind mounted path, the other
specified dump target.

Following is an example:
    -bash-4.2# cat /etc/kdump.conf | grep ^path
    path /var/crash

    -bash-4.2# findmnt /var | tail -n 1 | awk '{print $2}'
    /dev/mapper/atomicos-root[/ostree/deploy/rhel-atomic-host/var]

    -bash-4.2# findmnt -v /var | tail -n 1 | awk '{print $2}'
    /dev/mapper/atomicos-root

Then we can found it that the real path of dumping vmcore is
/ostree/deploy/rhel-atomic-host/var/crash.

To fix this issue, we can replace the target path as the real path which
is from above parsing.

Signed-off-by: Minfei Huang <mhuang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
2015-04-21 10:58:00 +08:00
Minfei Huang
c82a453c67 Get the mount point correctly, if the device has several mount point
Any block device can be mounted multiply on the different mount point.
Once a mount point is mounted in bind mode, the general mount point can
be unmounted. Thus kdump would not find the general mount point[1] to
handle the path.

The mount point, which is as general mount point, will be got by
"fintmnt" previously. But the mntpoint may be incorrect, if the mntpoint
is bind mount.

In order to fix it to support bind mounted in atomic, we will add a
judgement to comfirm the mntpoint is bind mounted, or not.

For general mount, returning path is like following, if we use
"findmnt". The returning is same as "findmnt -v".

    -bash-4.2# findmnt /var | tail -n 1 | awk '{print $2}'
    /dev/mapper/atomicos-root

But for bind mount, returning path is like following, if we use
"fintmnt".
    -bash-4.2# findmnt /var | tail -n 1 | awk '{print $2}'
    /dev/mapper/atomicos-root[/ostree/deploy/rhel-atomic-host/var]

Use "findmnt -v" is like this:
    -bash-4.2# findmnt -v /var | tail -n 1 | awk '{print $2}'
    /dev/mapper/atomicos-root

So we can determine the bind mount, if the returning is different
between "findmnt" and "findmnt -v".

[1] general mount point is a directory without being in bind mounted
mode, just a normal directory.

Signed-off-by: Minfei Huang <mhuang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
2015-04-21 10:57:44 +08:00
Minfei Huang
4a468829e7 kdump-lib: Add new function to judge the system is Atomic or not
For Atomic system, the cmdline will contain the specific string
"ostree". So we can filter out the "ostree" to judge the system is
Atomic or not.

Signed-off-by: Minfei Huang <mhuang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
2015-04-21 10:57:28 +08:00
Minfei Huang
ef94190ce5 kdump-lib: Add the new function to enhance bind mounted judgement
findmnt uses the option "-v, --nofsroot" to exclude the [/dir] in the
SOURCE column for bind-mounts, then if $_mntpoint equals to
$_mntpoint_nofsroot, the mountpoint is not bind mounted directory.

the value of $_mntpoint may be like
/dev/mapper/atomicos-root[/ostree/deploy/rhel-atomic-host/var], if the
directory is bind mounted. The former part represents the device path, the
rest part is the bind mounted directory which quotes by bracket "[]".

Signed-off-by: Minfei Huang <mhuang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
2015-04-21 10:57:12 +08:00
Minfei Huang
63476302aa dracut-kdump: Use proper the known hosts entry in the file known_hosts
Once login using ssh, the ssh will store the known hosts entry to the
local ~/.ssh/known_hosts. From now, we can login using ssh automaticly.

The ssh will check the ~/ssh/.known_hosts entry, if set the option
StrictHostKeyChecking=yes/ask in the config or command line, when you
want to login the target. the default value of StrictHostKeyChecking is
ask.
And the kdump using the ssh will append the option
StrictHostKeyChecking=yes in the command line.

We can using following ip to connect peer machine, if enable the ipv6.
fe80::5054:ff:fe48:ca80%eth0

Obviously, above ip contains the ethX.

Kdump will add the prefix "kdump-" before ethX to avoid flowing
netdevice name in case netdevice names ethX in the 2nd kernel. So the
ip address will change to fe80::5054:ff:fe48:ca80%kdump-eth0.

Kdump will login the target manully in the 2nd kernel, because of the
option StrictHostKeyChecking=yes and inexistence known hosts entry
in the local ~/.ssh/known_hosts. Hence dumping core will fail.

In order to login automaticly using ssh, we should add the prefix
"kdump-" before ethX in the local ~/.ssh/known_hosts.

Signed-off-by: Minfei Huang <mhuang@redhat.com>
2014-12-11 14:19:49 +08:00
WANG Chao
b95a63839a kdump-lib: fix get_option_value()
get_option_value() is used to get the value of $1 configured in
/etc/kdump.conf. But when we use "get_option_value ssh", it can get the
value of "sshkey" instead of "ssh".

Fix the regexp pattern to get an exact match.

Signed-off-by: WANG Chao <chaowang@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
2014-11-04 11:42:04 +08:00
Baoquan He
f8d7090b59 pass mount info to dracut when default target is a separate disk
When user does not specify dump target explicitly, it's better to
dump to the "path" specified. That means after dump user enter into
1st kernel, can find vmcore in the "path". If that path is in root
fs, vmcore is stored in root fs. If separate disk is mounted on
any tier of "path", we just dump vmcore into the left path on the
left separate disk.

E.g in kdump.conf
path /mnt/nfs

in mount info,
/dev/vdb on /mnt type ext4 (rw,relatime,seclabel,data=ordered)

Then vmcore will be saved in /nfs of /dev/vdb.

In this patch, pass mount info to dracut in this case if separate
disk is mounted on any tier of "path".

Meanwhile introduce a function in kdump-lib.sh to check if any
target is specified.

v4->v5:
    Per Vivek's comment, add a helper function is_fs_dump_target.
    Then is_user_configured_dump_target is rewrite with these helper
    functions.

v5->v7:
    No v6 for this patch. Just use newly introduced function
    is_fs_type_nfs in handle_default_dump_target.

Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-04-17 11:27:31 +08:00
Baoquan He
b2429dbd3d user need make sure "path" on mounted fs has been created
kdump need create the dir specified in "path" formerly if it does not
exist. Now change the behavior to be that ueser takes charge of the
"path", make sure "path" has been created, especially when separate disk
is mounted on this "path".

Also introduce 2 helper functions to help check the existence of path.

Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-04-17 11:27:31 +08:00
Baoquan He
b9185c78ee introduce several basic utility function
These utility function will be shared by several files, they are all
operation related to mount stuff.

Meantime define DEFAULT_PATH="/var/crash".

v5-> v6:
    Since in rhel7 nfs4 becomes default nfs version, and its fstype is
nfs4. So change the implementation of get_fs_type_from_target(),
whatever fstype returned from findmount, just echo nfs as fstype for all
nfs version.

v6->v7:
    Introduce is_fs_type_nfs to check if fstype is nfs or nfs4 per Vivek's
idea.

Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-04-17 11:27:31 +08:00
Martin Perina
2066e5f792 Add fence_kdump support for generic clusters
Adds two new options to kdump.conf to be able to configure fence_kdump
support for generic clusters:

  fence_kdump_args <arg(s)>
    - Command line arguments for fence_kdump_send (it can contain all
      valid arguments except hosts to send notification to)

  fence_kdump_nodes <node(s)>
    - List of cluster node(s) separated by space to send fence_kdump
      notification to (this option is mandatory to enable fence_kdump)

Generic clusters fence_kdump configuration take precedence over older
method of fence_kdump configuration for Pacemaker clusters. It means
that if fence_kdump is configured using above options in kdump.conf, old
Pacemaker configuration is not used even if it exists.

Bug-Url: https://bugzilla.redhat.com/1078134
Signed-off-by: Martin Perina <mperina@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-04-03 14:43:06 +08:00
Martin Perina
b8d586dd59 Add get_option_value()
Adds get_option_value() function to retrieve value of specified option
from /etc/kdump.conf.

Bug-Url: https://bugzilla.redhat.com/1078134
Signed-off-by: Martin Perina <mperina@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-04-03 14:43:03 +08:00
Martin Perina
98f58cdc56 Rename is_fence_kdump to is_pcs_fence_kdump
Renames is_fence_kdump to is_pcs_fence_kdump to identify that this
method should be used to detect fence_kdump configuration only in
Pacemaker clusters.

Bug-Url: https://bugzilla.redhat.com/1078134
Signed-off-by: Martin Perina <mperina@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-04-03 14:42:57 +08:00
Martin Perina
48f4375f2e Rename FENCE_KDUMP_NODES to FENCE_KDUMP_NODES_FILE
Renames FENCE_KDUMP_NODES variable to FENCE_KDUMP_NODES_FILE to
distinguish it from values read from fence_kdump_nodes option in
kdump.conf (introduced in following patches).

Bug-Url: https://bugzilla.redhat.com/1078134
Signed-off-by: Martin Perina <mperina@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-04-03 14:42:54 +08:00
Martin Perina
98d4be908a Rename FENCE_KDUMP_CONFIG to FENCE_KDUMP_CONFIG_FILE
Renames FENCE_KDUMP_CONFIG variable to FENCE_KDUMP_CONFIG_FILE to
distinguish it from values read from fence_kdump_args option in
kdump.conf (introduced in following patches).

Bug-Url: https://bugzilla.redhat.com/1078134
Signed-off-by: Martin Perina <mperina@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-04-03 14:42:13 +08:00
Baoquan He
c1bf4dec6c mkdumprd fail if target is NFS and mounted on /var/crash
Now when dump target is not specified, separate disk can't be mounted on
"path", e.g /var/crash. However if target is specified, whatever the default
fail action is set, mkdumprd should go ahead and not be failed.

In check_block_dump_target(), the check only on disk is not complete,
NFS and ssh need be filtered too. So introduce is_user_configured_dump_target
to check this.

Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-03-26 14:37:55 +08:00
Baoquan He
8c527aba43 kdump-lib.sh: introduce two functions abstracted from get_block_dump_target for reuse
In function get_block_dump_target(), code block to get user configured
dump disk and get root fs device can be reused by other places. Now
abstract and wrap them into 2 new functions:

get_user_configured_dump_disk()
get_root_fs_device()

And put them into kdump-lib.sh.

Meanwhile change the get_block_dump_target() accordingly.

Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-03-10 13:17:21 +08:00
WANG Chao
b0535afe2d kdump-lib: add common variables and function for fence kdump
Add following common variables and function:

$FENCE_KDUMP_CONIFG: configuration file /etc/sysconfig/fence_kdump
$FENCE_KDUMP_NODES: configuration file /etc/fence_kdump_nodes
$FENCE_KDUMP_SEND: executable /usr/libexec/fence_kdump_send
is_fence_kdump(): used to determine if the system is in a cluster and
configured with fence_kdump.

Signed-off-by: WANG Chao <chaowang@redhat.com>
Tested-by: Zhi Zou <zzou@redhat.com>
Tested-by: Marek Grac <mgrac@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-01-29 16:20:06 +08:00
Baoquan He
a682315996 kdump-lib.sh: strip_comments is not implemented correcty
In mkdumprd, strip_comments is not implemented correctly. Since arguments
passed, strip_comments only take $1 and misses others. This caused
problems. Such as below line, current code will only get "makedumpfile"
and pass it to $config_val finally, then parameters for makedumpfile
are missed.

core_collector makedumpfile -c --message-level 1 -d 31

Now modify function strip_comments.

Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: WANG Chao <chaowang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2013-10-12 16:00:12 +08:00
Baoquan He
ee524473c8 kdump-lib.sh: add common function strip_comments
Add function strip_comments into kdump-lib.sh, since it's used by
several files.

Signed-off-by: Wade Mealing <wmealing@redhat.com>
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2013-09-27 10:08:56 +08:00
WANG Chao
a8921f04ae Introduce kdump-lib.sh for kdump shared functions
Currently in the whole kdump framework, we have some common functions
used across not only mkdumprd context and dracut context, but also 1st
kernel and 2nd kernel. We defined these functions at each script, which
is obviously not decent.

So let's introduce kdump-lib.sh for the shared functions and put it
to /lib/kdump/kdump-lib.sh.

It starts small, as you can see, only 3 functions are extracted. But in
the future more and more common functions can be added.

Signed-off-by: WANG Chao <chaowang@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2013-09-27 10:07:13 +08:00