Fix the warning observed when KDUMP_KERNELVER is specified:
kdumpctl[10926]: /lib/kdump/kdump-lib.sh: line 697: [: missing `]'
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Kairui Song <kasong@redhat.com>
For crashkernel=auto policy, if total RAM size is under a throttle,
there is no memory reserved for kdump.
Also correct a trivial bug by correcting the arch name.
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Add a rough esitimation support, currently, following memory usage are
checked by this sub command:
- System RAM
- Kdump Initramfs size
- Kdump Kernel image size
- Kdump Kernel module size
- Kdump userspace user and other runtime allocated memory (currently
simply using a fixed value: 64M)
- LUKS encryption memory usage
The output of kdumpctl estimate looks like this:
# kdumpctl estimate
Reserved crashkernel: 256M
Recommanded crashkernel: 160M
Kernel image size: 47M
Kernel modules size: 12M
Initramfs size: 19M
Runtime reservation: 64M
Large modules:
xfs: 1892352
nouveau: 2318336
And if the kdump target is encrypted:
# kdumpctl estimate
Encrypted kdump target requires extra memory, assuming using the keyslot with minimun memory requirement
Reserved crashkernel: 256M
Recommanded crashkernel: 655M
Kernel image size: 47M
Kernel modules size: 12M
Initramfs size: 19M
Runtime reservation: 64M
LUKS required size: 512M
Large modules:
xfs: 1892352
nouveau: 2318336
WARNING: Current crashkernel size is lower than recommanded size 655M.
The "Recommanded" value is calculated based on memory usages mentioned
above, and will be adjusted accodingly to be no less than the value provided
by kdump_get_arch_recommend_size.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
apath (a D-Bus active connection path) is used for nmcli connection operations, e.g.
$ nmcli connection show $apath
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
nmcli --get-values <field> connection show /org/freedesktop/NetworkManager/ActiveConnection/1
returns the following value for the corresponding field respectively,
Field Value
IP4.DNS "10.19.42.41 | 10.11.5.19 | 10.5.30.160"
802-3-ethernet.s390-subchannels ""
bond.options "mode=balance-rr"
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
The `/boot` directory on some operating systems might be read-only.
If we cannot write to `$KDUMP_BOOTDIR` when generating the kdump
initrd, attempt to place the generated initrd at `/var/lib/kdump`
instead.
Signed-off by: Kelvin Fan <kelvinfan001@gmail.com>
Acked-by: Kairui Song <kasong@redhat.com>
On ppc64le LPAR, secure-boot is a little different from bare metal,
Where
host secure boot: /ibm,secure-boot/os-secureboot-enforcing DT property exists
while
guest secure boot: /ibm,secure-boot >= 2
Make kexec-tools adapt to LPAR
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
The kdump kernel uses resources for ftrace because trace_buf_size, which
specifies the ring buffer size for ftrace, and trace_event, which specifies
a valid trace event, are not removed, but the kdump kernel does not require
ftrace.
trace_buf_size is ignored if the specified size is 0, so specify 1.
Signed-off-by: Hisashi Nagaoka <fj1508ic@fujitsu.com>
Acked-by: Kairui Song <kasong@redhat.com>
There is requirement to decide the recommended memory size for the current
system. And the algorithm is based on /proc/iomem, so it can align with the
algorithm used by reserve_crashkernel() in kernel.
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Sourcing logger file in kdump-lib.sh will leak kdump helper to dracut,
because module-setup.sh will source kdump-lib.sh. This will make kdump's
function override dracut's ones, and lead to unexpected behaviours.
So include kdump-logger.sh individually and only source it where it really
needed. for module-setup.sh, simply use dracut's logger helper is good
enough so just source kdump-logger.sh in kdump only scripts.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
Currently get_bind_mount_source will not work on btrfs, that's because
this function relies on findmnt to detect bind mount.
For a bind mount, findmnt will return different value with "-v" option.
For example, we have /dev/sdc mounted on /mnt/source, and then bind
mount /mnt/source/sub/path to /mnt/bind:
$ findmnt /mnt/bind
TARGET SOURCE FSTYPE OPTIONS
/mnt/bind /dev/sdc[/sub/path] ext4 rw,relatime,seclabel
$ findmnt -v /mnt/bind
TARGET SOURCE FSTYPE OPTIONS
/mnt/bind /dev/sdc ext4 rw,relatime,seclabel
But findmnt also return similiar result for btrfs, on a fresh installed
Fedora 33:
$ findmnt /
TARGET SOURCE FSTYPE OPTIONS
/ /dev/sdb7[/root] btrfs rw,relatime,seclabel,ssd,space_cache,subvolid=256,subvol=/root
$ findmnt -v /
TARGET SOURCE FSTYPE OPTIONS
/ /dev/sdb7 btrfs rw,relatime,seclabel,ssd,space_cache,subvolid=256,subvol=/root
The [...] indicator will contain the subvol of btrfs as well. And if
it's bind mounted under btrfs, it will contain a mixup of btrfs subvol
and the actuall fsroot.
And also, if the bind mount source device is not mounted on /,
get_bind_mount_source will also not work.
So rewrite the get_bind_mount_source function, make it work in every
cases.
Tested with:
- Silverblue's bind mount
- Bind mount with source device mounted not under /
- Btrfs
- Bind mount and source device is Btrfs
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
Remove the --real when calling findmnt.
The option is only useful in capture kernel, to avoid
`findmnt` returning the pseudo 'rootfs' for non mounted path.
example, when /kdumproot/mnt/ is not mounted:
kdump:/# findmnt --target /kdumproot/mnt
TARGET SOURCE FSTYPE OPTIONS
/ rootfs rootfs rw,size=61368k,nr_inodes=15342
kdump:/# findmnt --target /kdumproot/mnt
<return 1 and empty output>
But this function will make findmnt also return empty value for bind
mount. So remove it and add an extra if statement for second kernel.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
Most watchdogs have a parameter pretimeout, if set to non-zero, it means
before the watchdog really reset the system, it will try to panic the
kernel first, so kdump could kick in, or, just print a panic stacktrace
and then kernel should reset it self.
If we are already in kdump kernel, this is not really helpful, only
increase kernel hanging chance. And it also make thing become complex
as some watchdog triggers the kernel panic in NMI context, which
could also hang the kernel in strange ways, and fail the watchdog it
self. So just disable this parameter.
Also for hpwdt, it have another parameter kdumptimeout, which is
just designed for first kernel. The default behaviour is the watchdog
will simply stop working if timeouted, trigger a panic, and leave the
kernel to kdump. Again, if we are already in kdump this is not helpful.
So also disable that.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
Since the logger was introduced into kdump, let's enable it for kdump
so that we can output kdump messages according the log level and save
these messages for debugging.
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
On s390, if Secure-IPL is enabled, then "kexec -s -l" is required.
Otherwise kdump kernel can not be loaded.
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Now all atomic special workaround is removed, we can remove the atomic
detection function.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
kernel installation is not always in a fixed location /boot, there are
multiple different style of kernel installation, and initramfs location
changes with kernel. The two files should be detected together and adapt
to different style.
To do so we use a list of known installation destinations, and a list
of possible kernel image and initrd names. Iterate the two list to
detect the installation location of the two files. If GRUB is in use,
the BOOT_IMAGE= cmdline from GRUB will also be considered. And also
prefers user specified config if given.
Previous atomic workaround is no longer needed as the new detection
method can cover that case.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
In secure boot mode, kexec_load syscall is disabled. So, if in secure
boot mode, load kdump kernel with kexec_file_load syscall instead.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
This reverts commit 6a20bd5447.
Let's restore the logic of secureboot status check, and remove the
option 'KDUMP_FILE_LOAD=on|off'. We will use the option KEXEC_ARGS="-s"
to enable the kexec file load later, which can avoid failures when
the secureboot is enabled.
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Dracut get_persistent_dev function don't recognize UUID= or LABEL=
format, so caller should conver it to the path to the block device
before calling it. There is already such a helper
"kdump_get_persistent_dev", just move it to kdump-lib.sh and rename
it to reuse it,
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Currently kexec-tools always depend on dump target to be mounted, which
caused some inconvenience for setup.
So for user configured target, allow kdump to start and build initramfs
even if target is not mounted.
When a mounted user configured target is used, the behavior is not
changed.
When a unmounted user configured target is used, mkdumprd will look for
corresponding mount info in fstab, and a entry with noauto option is
founded, mkdumprd will try to mount it inplace with optoins specified
in fstab and do basic checks on the device, then umount it.
If there is no fstab entry, mkdumprd will try to mount it in temporary
path with defaults option, do same basic check and umount it.
If there is a fstab entry but "noauto" option is not used, then there
must be some reason that the target device is not mounted, mkdumprd will
error out.
When path based target is used, there is no behavior change.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
Use get_mount_info so that fstab is used as a failback when look for
mount info.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
Use is_mounted helper instaed of calling findmnt directly or checking if
"mount" value is empty.
If findmnt looks for fstab as well, some non mounted entry will also
return value. Required to support non-mounted target.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
User a helper to get the path to mount dump target in kdump kernel, and
fix duplicated '/' in the mount path problem.
Fixes: bz1785371
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
This commit remove almost all special workaround for atomic, and treat
all bind mounts in any environment equally.
Use a helper get_bind_mount_directory_from_path to get the bind mount
source path of given path.
is_atomic function now only used to determine the right /boot path
for atomic/silverblue environment.
And remove get_mntpoint_from_path(), it's the only function that never
ignore bind mount, and it have no caller after this clean up.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
For user specified target, the config value is used as the dump target,
and SAVE_PATH (path in kdump.conf) value is used as the dump path within
the dump target, no need to do anything extra with the path value.
Current code logic is not only complicated, it also wrongly generate
an redundantly long path in atomic/silverblue environment.
The right way is only check two things, and do nothing else:
1. The path exists within the target;
2. The target is large enough to hold to contain the vmcore.
Currently checking the target still requires it to be mounted so it will
error out if it's not mounted. Will implement some auto mount as next
step.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
get_save_path provides default value fail back and error check, no need
to repeat it again.
Also remove a redundant echo and grep in get_save_path
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
Currently, is_user_configured_dump_target() doesn't work as expected
due to lack of grep -E option.
As a result, kdump service with a ssh dump configuration can unnecessarily
fail to start due to the non-existence of a directory at where the path
option specifies on the local system:
kdumpctl[9760]: Rebuilding /boot/initramfs-5.4.19-200.fc31.x86_64kdump.img
kdumpctl[9760]: Dump path /var/crash/ssh does not exist.
kdumpctl[9760]: mkdumprd: failed to make kdump initrd
kdumpctl[9760]: Starting kdump: [FAILED]
Signed-off-by: Kazuhito Hagio <k-hagio-ab@nec.com>
Acked-by: Kairui Song <kasong@redhat.com>
UEFI Secure boot is a signature verification mechanism, designed to
prevent malicious code being loaded and executed at the early boot
stage. This makes sure that code executed is trusted by firmware.
Previously, with kexec_file_load() interface, kernel prevents unsigned
kernel image from being loaded if secure boot is enabled. So kdump will
detect whether secure boot is enabled firstly, then decide which interface
is chosen to execute, kexec_load() or kexec_file_load(). Otherwise unsigned
kernel loading will fail if secure boot enabled, and kexec_file_load() is
entered.
Now, the implementation of kexec_file_load() is adjusted in below commit.
With this change, if CONFIG_KEXEC_SIG_FORCE is not set, unsigned kernel
still has a chance to be allowed to load under some conditions.
commit 99d5cadfde2b ("kexec_file: split KEXEC_VERIFY_SIG into KEXEC_SIG
and KEXEC_SIG_FORCE")
And in the current Fedora, the CONFIG_KEXEC_SIG_FORCE is not set, only the
CONFIG_KEXEC_SIG and CONFIG_BZIMAGE_VERIFY_SIG are set on x86_64 by default.
It's time to spread kexec_file_load() onto all systems of x86_64, including
Secure-boot platforms and legacy platforms. Please refer to the following
form.
.----------------------------------------------------------------------.
| . | signed kernel | unsigned kernel |
| . types |-----------------------|-----------------------|
| . |Secure boot| Legacy |Secure boot| Legacy |
| . |-----------|-----------|-----------|-----------|
| options . | prev| now | prev| now | | | prev| now |
| . |(file|(file|(only|(file| prev| now |(only|(file|
| . |load)|load)|load)|load)| | |load)|load)|
|----------------------|-----|-----|-----|-----|-----|-----|-----|-----|
|KEXEC_SIG=y | | | | | | | | |
|SIG_FORCE is not set |succ |succ |succ |succ | X | X |succ |succ |
|BZIMAGE_VERIFY_SIG=y | | | | | | | | |
|----------------------|-----|-----|-----|-----|-----|-----|-----|-----|
|KEXEC_SIG=y | | | | | | | | |
|SIG_FORCE is not set | | | | | | | | |
|BZIMAGE_VERIFY_SIG is |fail |fail |succ |fail | X | X |succ |fail |
|not set | | | | | | | | |
|----------------------|-----|-----|-----|-----|-----|-----|-----|-----|
|KEXEC_SIG=y | | | | | | | | |
|SIG_FORCE=y |succ |succ |succ |fail | X | X |succ |fail |
|BZIMAGE_VERIFY_SIG=y | | | | | | | | |
|----------------------|-----|-----|-----|-----|-----|-----|-----|-----|
|KEXEC_SIG=y | | | | | | | | |
|SIG_FORCE=y | | | | | | | | |
|BZIMAGE_VERIFY_SIG is |fail |fail |succ |fail | X | X |succ |fail |
|not set | | | | | | | | |
|----------------------|-----|-----|-----|-----|-----|-----|-----|-----|
|KEXEC_SIG is not set | | | | | | | | |
|SIG_FORCE is not set | | | | | | | | |
|BZIMAGE_VERIFY_SIG is |fail |fail |succ |succ | X | X |succ |succ |
|not set | | | | | | | | |
----------------------------------------------------------------------
Note:
[1] The 'X' indicates that the 1st kernel(unsigned) can not boot when the
Secure boot is enabled.
Hence, in this patch, if on x86_64, let's use the kexec_file_load() only.
See if anything wrong happened in this case, in Fedora firstly for the
time being.
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Previously is_nfs_dump_target didn't cover the case that 'path <value>'
where <value> points to a nfs mount point. This function is never used
in first kernel before so so far it worked.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
This help deduplicate the code. Use a single function instead of
repeat the same logic.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
Some of echo $(...) code segment is pointless, just call the command
directly, and remove some useless if / return statement.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
When trying to setup kdump for fedora-coreos, kdumpctl start fails to
find the correct boot directory since BOOT_IMAGE start with the grub
device name
Signed-off-by: Yuval Turgeman <yturgema@redhat.com>
When reading kdump configs, a single parsing should be enough and this
saves a lot of duplicated striping call which speed up the total load
speed.
Speed up about 2 second when building and 0.1 second for reload in my
tests.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
In preparation for adding 'final_action' option, since it's confusing
to have the 'final_action' and 'default' options at the same time,
this patch introduces 'failure_action' as an alias of the 'default'
option to /etc/kdump.conf, and makes 'default' obsolete to be removed
in the future.
Also, the "default action" term is renamed to "failure action".
Signed-off-by: Kazuhito Hagio <k-hagio@ab.jp.nec.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Lianbo Jiang <lijiang@redhat.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Acked-by: Bhupesh Sharma <bhsharma@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
we move some common functions from kdumpctl to kdump-lib.sh, the
functions could be used in other modules, such as early kdump.
It has no bad effect.
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Reviewed-by: Kazuhito Hagio <khagio@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
This reverts commit 2f4149f276.
It is not proved to be right to get auto6 or dhcpv6 in 1st kernel,
pingfan is working on a dracut fix to do some fallback in 2nd kernel initramfs.
So revert this commit
Kdump always use _proto=dhcp for both ipv4 and ipv6. But for ipv6
the dhcp address assignment is not like ipv4, there are different ways
for it, stateless and stateful, see below document:
https://fedoraproject.org/wiki/IPv6Guide
In case stateless, kernel can do the address assignment, dracut use
_proto=auto6; for stateful case, dracut use _proto=dhcp6.
We do not see bug reports before because for the most auto6 cases
kernel assign ip address before dhclient, kdump just happened to work.
Here we use auto6 if possible first. And we take the assumption that
host use auto6 if /proc/sys/net/ipv6/conf/$netdev/autoconf is enabled
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Dracut has "--hostonly-cmdline" which can generate cmdlines(if any)
regarding the dump target, it's an existing way for us to use to
simplify the code. E.g. We already removed generate_lvm_cmdlines(),
to use "--hostonly-cmdline".
But "--hostonly-cmdline" has other issues(e.g. BZ1451717), it adds
needless devices for kdump like root device.
Now dracut supports "--no-hostonly-default-device" which enables
us to only add the kdump target, which can avoid needless devices
being recognized under kdump. Thus "--hostonly-cmdline" side effects
can be avoided with the help of "--no-hostonly-default-device".
This patch applies dracut's "--hostonly-cmdline" together with
"--no-hostonly-default-device" to achieve above-mentioned purpose.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Make is_fadump_capable() a library function, as we will need
it in mkdumprd.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
This reverts commit 54a5bcc4ee.
We are going to add "--no-hostonly-default-device" dracut argument
in the following patch.
With the help of "--no-hostonly-default-device", dracut only
adds the dump target as host devices, which naturally guarantees
only required dracut modules being selected.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Resolves: bz1451717
https://bugzilla.redhat.com/1451717
When there is no crypt related kdump target, we can safely
omit "crypt" dracut module, this can avoid the pop asking
disk password during kdump boot in some cases.
This patch introduces omit_dracut_modules() before calling
dracut, we can omit more modules to reduce initrd size in
the future.
We don't want to omit any module for fadump, thus we move
is_fadump_capable() into kdump-lib.sh as a helper to use.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Resolves: bz1451717
https://bugzilla.redhat.com/1451717
We need to know all the kdump targets including the dump
target and root in case of "dump_to_rootfs".
This is useful for us to do some extra work related to the
type of different targets.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
