A space was added by mistake and unfortunately fips-mode-setup refuses
an extra parameter,
# fips-mode-setup --is-enabled 2 > /dev/null
# echo $?
2
# fips-mode-setup --is-enabled 2
Check, enable, or disable the system FIPS mode.
usage: /usr/bin/fips-mode-setup --enable|--disable [--no-bootcfg]
usage: /usr/bin/fips-mode-setup --check
usage: /usr/bin/fips-mode-setup --is-enabled
So in this case mkdumprd can never detect if FIPS is enabled. Fix this
mistake.
Fixes: 443a43e0 ("mkdumprd: call dracut with --add-device to install the drivers needed by /boot partition automatically for FIPS")
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Tao Liu <ltao@redhat.com>
Currently, kexec-tools only updates the crashkernel to a new default
value only when both two conditions are met,
- auto_reset_crashkernel=yes in kdump.conf
- existing kernels or current running kernel should use the old default
value.
To address seen corner cases, the logic to tell if the second condition
is met becomes quite complex. Instead of making the logic more complex
to support aarch64-64k, this patch drops the second condition to
simplify the management of the crashkernel kernel parameter.
Another change brought by this simplification is kexec-tools will also
set up the kernel crashkernel parameter for a fresh install (previously
it's limited to osbuild).
Note
1. This patch also stop trying to update /etc/default/grub because
a) it only affects the static file /boot/grub2/grub.cfg
b) grubby is recommended to change the kernel command-line parameters
for both Fedora [1] and RHEL9 [2][3]
c) For the cases of aarch64 and POWER, different kernels could have
different default crashkernel value.
2. Starting with Fedora 37, posttrans rpm scriplet distinguish between
package install and upgrade.
[1] https://fedoraproject.org/wiki/GRUB_2
[2] https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/9/html/managing_monitoring_and_updating_the_kernel/configuring-kernel-command-line-parameters_managing-monitoring-and-updating-the-kernel#changing-kernel-command-line-parameters-for-all-boot-entries_configuring-kernel-command-line-parameters
[3] https://access.redhat.com/solutions/1136173
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Currently, for non-s390x systems, the return code is 1 even when
_update_kernel_cmdline is correctly executed. This makes callers like
reset_crashkernel_after_update fail to print a message if a kernel has
its crashkernel updated. Fix it by put the code inside if block for
s390x.
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Currently, kdump doesn't work on many FIPS-enabled systems including
Azure, ESXI, Hyper, POWER and etc. When FIPS is enabled, it needs to
access /boot//.vmlinuz-xxx.hmac to verify the integrity of the kernel.
However, on those systems, /boot fails to be mounted due to a lack of
fs and block device drivers and the system just halted after failing to
verify the integrity of the kernel. For example, on Hyper-V, sd_mod, sg,
scsi_transport_fc, hv_storvsc and hv_vmbus need to be installed in order
for /boot to be mounted.
mkdumprd calls dracut with the --no-hostonly-default-device. Following
the documentation (man dracut),
--no-hostonly-default-device
Do not generate implicit host devices like root, swap, fstab, etc.
Use "--mount" or "--add-device" to explicitly add devices as needed
this patch uses "--add-device" to explicitly add the device of /boot.
Note there is already an attempt to fix it in dracut's 01fips module
i.e. via the commit 83651776 ("fips: ensure fs module for /boot is
installed"). Unfortunately it only installs the file system driver e.g.
xfs.
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
On aarch64, a 64k kernel's name looks like:
vmlinuz-5.14.0-300.el9.aarch64+64k and the corresponding debug kernel's
name looks like: vmlinuz-5.14.0-300.el9.aarch64+64k-debug, which ends
with the suffix -debug instead of +debug.
Fix the matching pattern by [+|-]debug
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
The default systemd-boot installed kernels on fedora end up in the form:
/boot/efi/36b54597c46383/6.4.0-0.rc0.20230427git6e98b09da931.5.fc39.aarch64/linux
Where the kernel version is a directory containing the kernel (linux)
and the initrd. Thus _find_kernel_path_by release needs to be a bit less
strict and allow some futher characters on the grubby (really bootctl)
output.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
The new aggressive strip option was added in dracut 058, which tell
dracut to build the initramfs stripping more sections of the ELF
binaries (basically strip .symtab, .strtab).
These section are only useful for debugging runtime failures, but in
kdump kernel, neccessary tools for debug any runtime failure are
absent, there is no point keeping these sections.
Stripping these section can help save some memory with almost no side
effect. So let enable --aggressive-strip by default.
Comparison of unpacked initramfs before / after enabling aggressive strip:
du -hs image image.aggressive-strip
31M image
29M image.aggressive-strip
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
A Unified Kernel Image (UKI) is a single EFI PE executable combining an
EFI stub, a kernel image, an initrd image, and the kernel command line.
They are defined in the Boot Loader Specification [1] as type #2
entries. UKIs have the advantage that all code as well as meta data that
is required to boot the system, not only the kernel image, is combined
in a single PE file and can be signed for EFI SecureBoot. This extends
the coverage of SecureBoot extensively.
For RHEL support for UKI were included into kernel-ark with 16c7e3ee836e
("redhat: Add sub-RPM with a EFI unified kernel image for virtual
machines").
There are two problems with UKIs from the kdump point of view at the
moment. First, they cannot be directly loaded via kexec_file_load and
second, the initrd included isn't suitable for kdump. In order to enable
kdump on systems with UKIs build the kdump initrd as usual and extract
the kernel image before loading the crash kernel.
[1] https://uapi-group.org/specifications/specs/boot_loader_specification/
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
Others will need to use a temporary files, too. In order to avoid
potential clashes of multiple trap handlers move the local temp file
into a global temp dir.
While at it make sure that the trap handler returns the correct exit
code.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
The function is only used in do_estimate. Move it to kdumpctl to
prevent confusion.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
The function is pretty broken right now. To start with the -o/--omit
option allows a quoted, space separated list of modules. But using 'set'
breaks quotation and thus only considers the first element in the list.
Furthermore dracut uses getopt internally. This means that it is also
possible to pass the list via --omit=.
Fix the function by making use of getopt for parsing the dracut_args.
While at it also add a test cases to cover the functions.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
The function is only used in kdumpctl. Thus move it there to keep
kdump-lib small and simple.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
The function isn't used anywhere. Thus remove it to keep kdump-lib small
and simple.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
The function isn't used anywhere. Thus remove it to keep kdump-lib small
and simple.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
With the NetworkManager rewrite this function in no longer used. This
also allows to remove a lot of dead code in kdump-lib.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
The function isn't used anywhere. Thus remove it to keep
kdump-lib-initramfs small and simple.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Lichen Liu <lichliu@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
If the device/mountpoint for findmnt is omitted findmnt will list all
mounted filesystems. In that case it will always return "true". So
explicitly check if an argument was passed to prevent false-positives.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
Relates: https://bugzilla.redhat.com/show_bug.cgi?id=2151504
Currently, when the network isn't ready, kdump would repeatedly print
the same info,
[ 29.537230] kdump[671]: Bad kdump network destination: 192.123.1.21
[ 30.559418] kdump[679]: Bad kdump network destination: 192.123.1.21
[ 31.580189] kdump[687]: Bad kdump network destination: 192.123.1.21
This is not user-friendly and users may think kdump has got stuck. So
also show much time has waited for the network to be ready,
[ 29.546258] kdump[673]: Waiting for network to be ready (50s / 10min)
...
[ 32.608967] kdump[697]: Waiting for network to be ready (56s / 10min)
Note kdump_get_ip_route no longer prints an error message and it's up to
the caller to determine the log level and print relevant messages. And
kdump_collect_netif_usage aborts when kdump_get_ip_route fails.
Reported-by: Martin Pitt <mpitt@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2151504
When a NetworManager connection profile contains a colon in the name,
"nmcli --get-values UUID,FILENAME" by default would escape the colon
because a colon is also used for separating the values. In this case,
99kdumpbase fails to get the correct connection profile path,
kdumpctl[5439]: cp: cannot stat '/run/NetworkManager/system-connections/static-52\\\:54\\\:01.nmconnection': No such file or directory
kdumpctl[5440]: sed: can't read /tmp/1977-DRACUT_KDUMP_NM/ifcfg-static-52-54-01: No such file or directory
kdumpctl[5449]: dracut-install: ERROR: installing '/tmp/1977-DRACUT_KDUMP_NM/ifcfg-static-52-54-01' to '/etc/NetworkManager/system-connections/ifcfg-static-52-54-01'
As a result, dumping vmcore to a remote nfs would fail.
In our case of getting connection profile path, there is no need to escape the
colon so pass "-escape no" to nmcli,
[root@localhost ~]# nmcli --get-values UUID,FILENAME c show
659e09c1-a6bd-3549-9be4-a07a1a9a8ffd:/etc/NetworkManager/system-connections/aa\:bb.nmconnection
[root@localhost ~]# nmcli -escape no --get-values UUID,FILENAME c show
659e09c1-a6bd-3549-9be4-a07a1a9a8ffd:/etc/NetworkManager/system-connections/aa:bb.nmconnection
Suggested-by: Beniamino Galvani <bgalvani@redhat.com>
Reported-by: Martin Pitt <mpitt@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Although upgrading the kernel with `rpm -Uvh` is not recommended, the
kexec-tools plugin prints confusing error logs when a customer upgrades the
kernel through it.
```
kdump: kernel 5.14.0-80.el9.x86_64 doesn't exist
kdump: Couldn't find current running kernel
```
Not finding the currently running kernel will only make kdump unable to copy the
grub entry parameters to the newly installed kernel, so lower the log level.
Signed-off-by: Lichen Liu <lichliu@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2140721
Currently, if users specify dumping to nfsv4 target via
dracut_args --mount "<NFS-server-ip>:/var/crash /mnt nfs defaults"
it fails with the following errors,
[ 5.159760] mount[446]: mount.nfs: Protocol not supported
[ 5.164502] systemd[1]: mnt.mount: Mount process exited, code=exited, status=32/n/a
[ 5.167616] systemd[1]: mnt.mount: Failed with result 'exit-code'.
[FAILED] Failed to mount /mnt.
This is because nfsv4-releted drivers are not installed to kdump initrd.
mkdumprd calls dracut with "--hostonly-mode strict". If nfsv4-related
drivers aren't loaded before calling dracut, they won't be installed.
When users specify nfs dumping via dracut_args, kexec-tools won't mount
the nfs fs beforehand hence nfsv4-related drivers won't be installed.
Note dracut only installs the nfs driver i.e. nfsv3 driver for "--mount
... nfs". So also install nfsv4-related drivers when users specify nfs
dumping via dracut_args. Since nfs_layout_nfsv41_files depends on nfsv4,
the nfsv4 driver will be installed automatically.
As for the reason why we support nfs dumping via dracut_args instead of
asking user to use the nfs directive, please refer to commit 74c6f464
("Support special mount information via 'dracut_args'").
Fixes: 4eedcae5 ("dracut-module-setup.sh: don't include multipath-hostonly")
Reported-by: rcheerla@redhat.com
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Probing unnecessary I/O devices wastes memory and in extreme cases can
cause the crashkernel to run OOM. That's why the s390-tools maintain
their own module, 95zdev-kdump [1], that disables auto LUN scanning and
only configures zfcp devices that can be used as dump target. So remove
zfcp.allow_lun_scan from the kernel command line to prevent that we
accidentally overwrite the default set by the module.
[1] https://github.com/ibm-s390-linux/s390-tools/blob/master/zdev/dracut/95zdev-kdump/module-setup.sh
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
`uname -m` was used by mistake. As a result, kexec-tools failed to
update crashkernel=auto during in-place upgrade from RHEL8 to RHEL9.
`uname -m` should be used to get architecture instead.
Fixes: 5951b5e2 ("Don't try to update crashkernel when bootloader is not installed")
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Lichen Liu <lichliu@redhat.com>
At the beginning of do_estimate it currently checks whether the
TARGET_INITRD exists and if not fails with an error message. This not
only requires the user to manually trigger the build of the initrd but
also ignores all cases where the TARGET_INITRD exists but need to be
rebuild. For example when there were changes to kdump.conf or when the
system switches from kdump to fadump. All these changes will impact the
outcome of do_estimate. Thus properly check whether the initrd needs to
be rebuild and if it does trigger the rebuild automatically.
To do so move the check whether the TARGET_INITRD has fadump enabled to
is_system_modified and call this function. With this force_(no_)rebuild
options in kdump.conf are ignored to avoid unnecessary rebuilds.
While at it cleanup check_system_modified and rename it to
is_system_modified. Furthermore move printing the info that the initrd
gets rebuild to rebuild_initrd to avoid every caller has the same line.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
check_rebuild uses a bunch of local variables to store the result of the
different checks performed. At the end of the function it then evaluates
which check failed to print an appropriate info and trigger a rebuild if
needed. This not only makes the function hard to read but also requires
all checks to be executed even if an earlier one already determined that
the initrd needs to be rebuild. Thus refractor check_rebuild such that
it only checks whether the initrd needs to rebuild and trigger the
rebuild by the caller (if needed). While at it rename the function to
need_initrd_rebuild.
Furthermore also move setup_initrd to the caller so it is more consisted
with the other users of the function.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
Like for 'start' move the printing of the error message to the calling
function. This not only makes the code more consistent to 'start' but
also prevents 'kdumpctl restart' to call 'start' in case 'stop' has
failed. This doesn't impact the case when 'kdumpctl restart' is run
without any crash kernel being loaded as kexec will still return success
in that case.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
The function has many block of the kind
if ! cmd; then
derror "Starting kdump: [FAILED]"
return 1
fi
This duplicates code and makes the function hard to read. Thus move the
block to the calling function.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
A recently added unit test found that prepare_cmdline has several
problems. For example an empty remove list will remove all spaces or
when the cmdline contains a parameter with quoted values containing
spaces will only remove the beginning up to the first space. Furthermore
the old design requires lots of subshells and pipes.
This patch rewrites prepare_cmdline in a way that makes the unit test
happy and tries to use as many bash built-ins as possible.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
Move the workaround for aws graviton cpus from load_kdump to
prepare_cmdline. This (1) makes the workaround available also for other
callers of prepare_cmdline (although not needed at the moment) and (2)
makes it easier to fix the problems found by the unit test included
earlier as all changes to the cmdline are done at one place now.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
prepare_cmdline is totally broken. For example if the remove list ($2)
is empty it removes all white spaces or if a parameter has a quoted
value containing a white space it only removes the first part of the
parameter up to the first space. Thus add a test case that shows what the
function should do in order to fix it in subsequent patches.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
is_squash_available is only used in dracut-module-setup.sh and mkdumprd.
Neither of the two scripts calls prepare_kdump_bootinfo which determines
and sets KDUMP_KERNELVER. Thus KDUMP_KERNELVER is only non-zero if it
explicitly specified by the user in /etc/sysconfig/kdump (and the file
gets sourced, which is not the case for drachu-module-setup.sh).
In theory this can even lead to bugs. For example consider the case when
a debug kernel is running. In that case kdumpctl will try to use the
non-debug version of the kernel while is_squash_available will make its
decision based on the debug version. So in case the debug kernel has
squash available but the non-debug kernel doesn't mkdumprd will try to
add it nevertheless.
Thus factor out the kernel version detection from prepare_kdump_bootinfo
and make use of the new function when checking for the availability of
those kernel modules.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
mkfadumprd doesn't call prepare_kdump_bootinfo from kdump-lib.sh. Thus
both KDUMP_KERNELVER and DEFAULT_INITRD are always empty. Simply remove
them from the debug print.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
Both functions are almost identical. The only differences are (1) the
sysfs node the status is read from and (2) the fact the fadump version
doesn't verify if the file it's trying to read actually exists. Thus
merge the two functions and get rid of the check_current_status wrapper.
While at it rename the function to is_kernel_loaded which explains
better what the function does.
Finally, after moving FADUMP_REGISTER_SYS_NODE shellcheck can no longer
access the definition and starts complaining about it not being quoted.
Thus quote all uses of FADUMP_REGISTER_SYS_NODE.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
Currently dracut-early-kdump.sh claims to be POSIX compliant but it
sources kdump-lib.sh which uses bash-only syntax. Thus require bash for
dracut-early-kdump.sh as well.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
Fix the following issues found by shellcheck. For the second one disable
shellcheck as EARLY_KEXEC_ARGS can contain multiple arguments.
In dracut-early-kdump.sh line 9:
EARLY_KDUMP_KERNELVER=""
^-------------------^ SC2034: EARLY_KDUMP_KERNELVER appears unused. Verify use (or export if used externally).
In dracut-early-kdump.sh line 61:
if $KEXEC $EARLY_KEXEC_ARGS $standard_kexec_args \
^---------------^ SC2086: Double quote to prevent globbing and word splitting.
For more information:
https://www.shellcheck.net/wiki/SC2034https://www.shellcheck.net/wiki/SC2086
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
With the deprecation of the 'default' option in kdump.conf
check_failure_action_config needed to track which option was used
(default or failure_action). This made the function quite complex.Thus
make option 'default' a true alias of 'failure_action' when parsing
kdump.conf and simplify check_failure_action_config.
Do the same simplifications for check_final_action_config as both
functions are basically identical.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
Resolves: bz2155754
Upstream: https://github.com/makedumpfile/makedumpfile
Conflict: None
commit 5f17bdd2128998a3eeeb4521d136a192222fadb6
Author: Kazuhito Hagio <k-hagio-ab@nec.com>
Date: Wed Dec 21 11:06:39 2022 +0900
[PATCH] Fix wrong exclusion of slab pages on Linux 6.2-rc1
* Required for kernel 6.2
Kernel commit 130d4df57390 ("mm/sl[au]b: rearrange struct slab fields to
allow larger rcu_head"), which is contained in Linux 6.2-rc1 and later,
made the offset of slab.slabs equal to page.mapping's one. As a result,
"makedumpfile -d 8", which should exclude user data, excludes some slab
pages wrongly because isAnon() returns true when slab.slabs is an odd
number. With such dumpfiles, crash can fail to start session with an
error like this:
# crash vmlinux dumpfile
...
crash: page excluded: kernel virtual address: ffff8fa047ac2fe8 type: "xa_node shift"
Make isAnon() check that the page is not slab to fix this.
Signed-off-by: Kazuhito Hagio <k-hagio-ab@nec.com>
Reported-by: Baoquan He <bhe@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Currently when using anaconda to install the OS, the following errors
occur,
INF packaging: Configuring (running scriptlet for): kernel-core-5.14.0-70.el9.x86_64 ...
INF dnf.rpm: grep: /boot/grub2/grubenv: No such file or directory
grep: /boot/grub2/grubenv: No such file or directory
grep: /boot/grub2/grubenv: No such file or directory
grep: /boot/grub2/grubenv: No such file or directory
...
INF packaging: Configuring (running scriptlet for): kexec-tools-2.0.23-9.el9.x86_64 ...
INF dnf.rpm: grep: /boot/grub2/grubenv: No such file or directory
grep: /boot/grub2/grubenv: No such file or directory
grep: /boot/grub2/grubenv: No such file or directory
Or for s390, the following errors occur,
INF packaging: Configuring (running scriptlet for): kernel-core-5.14.0-71.el9.s390x ...
03:37:51,232 INF dnf.rpm: grep: /etc/zipl.conf: No such file or directory
grep: /etc/zipl.conf: No such file or directory
grep: /etc/zipl.conf: No such file or directory
INF packaging: Configuring (running scriptlet for): kexec-tools-2.0.23-9_1.el9_0.s390x ...
INF dnf.rpm: grep: /etc/zipl.conf: No such file or directory
This is because when anaconda installs the packages, bootloader hasn't
been installed and /boot/grub2/grubenv or /etc/zipl.conf doesn't exist.
So don't try to update crashkernel when bootloader isn't ready to avoid
the above errors.
Note this is the second attempt to fix this issue. Previously a file
/tmp/kexec_tools_package_install was created to avoid running the
related code thus to avoid the above errors but unfortunately that
approach has two issues a) somehow osbuild doesn't delete it for RHEL b)
this file could still exist if users manually remove kexec-tools.
Fixes: e218128 ("Only try to reset crashkernel for osbuild during package install")
Reported-by: Jan Stodola <jstodola@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Hyper-V VM with accelerated networking
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2151842
Currently, vmcore dumping to remote fs fails on Azure Hyper-V VM with
accelerated networking because it uses a physical NIC for accrelarated
networking [1]. In this case, the driver for this physical NIC should be
installed as well.
[1] https://learn.microsoft.com/en-us/azure/virtual-network/accelerated-networking-overview
Fixes: a65dde2d ("Reduce kdump memory consumption by only installing needed NIC drivers")
Reported-by: Xiaoqiang Xiong <xxiong@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
interface
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2151500
Currently, kdump initrd fails to be built when dumping vmcore to
localhost via ssh or nfs,
kdumpctl[3331]: Cannot get driver information: Operation not supported
kdumpctl[1991]: dracut: Failed to get the driver of lo
dracut[2020]: Failed to get the driver of lo
kdumpctl[1775]: kdump: mkdumprd: failed to make kdump initrd
kdumpctl[1775]: kdump: Starting kdump: [FAILED]
systemd[1]: kdump.service: Main process exited, code=exited, status=1/FAILURE
systemd[1]: kdump.service: Failed with result 'exit-code'.
systemd[1]: Failed to start Crash recovery kernel arming.
systemd[1]: kdump.service: Consumed 1.710s CPU time.
This is because the loopback interface is used for transferring vmcore and
ethtool can't get the driver of the loopback interface. In fact, once
COFNIG_NET is enabled, the loopback device is enabled and there is no driver
for the loopback device. So skip installing driver for the loopback device.
The loopback interface is implemented in linux/drivers/net/loopback.c
and always has the name "lo". So we can safely tell if a network
interface is the loopback interface by its name.
Fixes: a65dde2d ("Reduce kdump memory consumption by only installing needed NIC drivers")
Reported-by: Martin Pitt <mpitt@redhat.com>
Reported-by: Rich Megginson <rmeggins@redhat.com>
Reviewed-by: Lichen Liu <lichliu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2149246
Latest Workstation live x86_64 image has an excess increase of ~300 MB
in size. This is because kdumpbase module's trap handler overwrites
dracut's handler and DRACUT_TMPDIR which has three unpacked initramfs
files fails to be cleaned up. This patch moves kdumpbase module's
temporary folder under DRACUT_TMPDIR and lets dracut's trap handler do
the cleanup instead.
Fixes: d25b1ee3 ("Add functions to copy NetworkManage connection profiles to the initramfs")
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
With kernel commit 607451ce0aa9b ("powerpc/fadump: register for fadump
as early as possible"), 'kdumpctl start' prematurely returns with the
below message:
"Kdump already running: [WARNING]"
instead of setting default initrd with dump capture capability as
required for fadump. Skip status check in fadump mode to avoid this
problem.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
