Make is_fadump_capable() a library function, as we will need
it in mkdumprd.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
This reverts commit cb38b32dfc.
We are going to add "--hostonly-cmdline" dracut argument in
the following patch.
With the help of "--hostonly-cmdline", dracut will generate
"rd.lvm.lv=X" for us, no need to implement here again.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
This reverts commit 54a5bcc4ee.
We are going to add "--no-hostonly-default-device" dracut argument
in the following patch.
With the help of "--no-hostonly-default-device", dracut only
adds the dump target as host devices, which naturally guarantees
only required dracut modules being selected.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
This reverts commit 821d1af080.
We are going to add "--no-hostonly-default-device" dracut argument
in the following patch.
With the help of "--no-hostonly-default-device", dracut only
adds the dump target as host devices, which naturally guarantees
only required dracut modules being selected.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
This reverts commit fb522e972c.
We are going to add "--no-hostonly-default-device" dracut argument
in the following patch.
With the help of "--no-hostonly-default-device", dracut only
adds the dump target as host devices, which naturally guarantees
only required dracut modules being selected.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Added patch from panand which was accepted by upstream but not merged in upstream yet.
kexec-tools-2.0.15-makedumpfile-fix-SECTION_MAP_MASK-for-kernel-bigger-than-4.13.patch
Currently kdump service is restarted even when any new file is added in cpu
subsystem. So, it can be restarted multiple times in the cases like loading
of acpi_cpufreq module or online/offline of any cpu.
However, we should see kdump service restart only once in case a new CPU
is added or removed. cpu crash notes buffer is created when a new CPU is
added. It's location does not change when a CPU is onlined/offlined or
acpi_cpufreq driver is loaded. Therefore, no need to restart kdump
service in such cases.
Thus, we need to introduce an extra filter for the kernel name of the
directory created by cpu_add which is KERNEL=="cpu[0-9]*". This will ensure
that kdump service is not restarted when any new file is added in /removed
from cpu subsystem.
Signed-off-by: Pratyush Anand <panand@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Currently, we throw the error message at the very beginning, as
a result on a pure-hardware(all-offload) iscsi machine with many
iscsi partitions, we suffered from too much noise as follows:
iscsiadm: No records found
Unable to find iscsi record for
/sys/devices/pci0000:00/0000:00:06.0/0000:07:00.0/0000:08:01.1/host0/session1
iscsiadm: No records found
Unable to find iscsi record for
/sys/devices/pci0000:00/0000:00:06.0/0000:07:00.0/0000:08:01.3/host1/session2
iscsiadm: No records found
Unable to find iscsi record for
/sys/devices/pci0000:00/0000:00:06.0/0000:07:00.0/0000:08:01.1/host0/session1
iscsiadm: No records found
Unable to find iscsi record for
/sys/devices/pci0000:00/0000:00:06.0/0000:07:00.0/0000:08:01.3/host1/session2
iscsiadm: No records found
Unable to find iscsi record for
/sys/devices/pci0000:00/0000:00:06.0/0000:07:00.0/0000:08:01.1/host0/session1
iscsiadm: No records found
Unable to find iscsi record for
/sys/devices/pci0000:00/0000:00:06.0/0000:07:00.0/0000:08:01.3/host1/session2
iscsiadm: No records found
Unable to find iscsi record for
/sys/devices/pci0000:00/0000:00:06.0/0000:07:00.0/0000:08:01.1/host0/session1
iscsiadm: No records found
Unable to find iscsi record for
/sys/devices/pci0000:00/0000:00:06.0/0000:07:00.0/0000:08:01.3/host1/session2
iscsiadm: No records found
Unable to find iscsi record for
/sys/devices/pci0000:00/0000:00:06.0/0000:07:00.0/0000:08:01.1/host0/session1
iscsiadm: No records found
Unable to find iscsi record for
/sys/devices/pci0000:00/0000:00:06.0/0000:07:00.0/0000:08:01.3/host1/session2
kexec: loaded kdump kernel
Starting kdump: [OK]
There's no need to know the very early error messages, we can
remove the error output which is actually normal for the pure
hardware iscsi.
As for unexpected errors, we kept the error outputs in the
succeeding kdump_iscsi_get_rec_val() calls by not appending
"2>/dev/null".
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Currently, systemd uses 90s as the default mount unit timeout
(see "man 5 systemd-system.conf " for "DefaultTimeoutStartSec"),
in some cases, although it works well in 1st kernel, it's not
enough under kdump and results in mount timeout, further results
in kdump dumping failure.
We've met several such issues, we decided to enlarge this default
value a little for kdump.
We know that dracut has a default initqueue timeout value of 180s
("rd.retry"), we finalized a little larger value 300s as kdump's
default timeout if there is no explicit "DefaultTimeoutStartSec=X,
specified by users.
"DefaultTimeoutStartSec=X" can be overridden by individual mount
option "x-systemd.device-timeout=X", users can specify their own
values as needed.
This patch achieves the purpose by creating a dedicated conf file
"/etc/systemd/system.conf.d/kdump.conf" which has the content of
"DefaultTimeoutStartSec=300s", this is based on the fact that all
the conf files will be parsed by systemd and the last parsed one
will be used if there are duplicate definitions.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1474706
Makedumpfile failed with below error messages, which is caused by kernel changes 65ade2f872b474fa8a04c2d397783350326634e6:
Buffer size for the cyclic mode: 95992
vtop4_x86_64: Can't get the symbol of init_level4_pgt.
readmem: Can't convert a virtual address(ffffffff8fe18284) to physical address.
readmem: type_addr: 0, addr:ffffffff8fe18284, size:390
check_release: Can't get the address of system_utsname.
Pull in Pratyush's fix in upstream makedumpfile (not merged yet but acked by
maintainer)
Signed-off-by: Dave Young <dyoung@redhat.com>
After the following systemd commit, "x-initrd.mount"
option became useless actually, we can safely remove
it now.
commit ce3f6d82b003f365f718f24e48f55b8a0372b924
Author: nmartensen <nis.martensen@web.de>
Date: Fri Jan 15 07:55:25 2016 +0100
fstab-generator: remove bogus condition
The sysroot mount is already taken care of by the
add_sysroot_mount function. With this condition
left in, we can we can get something like this:
initrd-root-fs.target.requires
`-- usr.mount -> /run/systemd/generator/usr.mount
in the main system (i.e., not in the initramfs). In
the initramfs, the previous condition already kicks in.
[snip]
"mount_in_initrd(me)" is true with "x-initrd.mount" option,
the behaviour of systemd fstab generator changed after the
above-mentioned patch, it always generates local mount units
required by local-fs.target regardless of "x-initrd.mount".
After failure, it enters dracut emergency, further triggers
kdump emergency service, thus there is no problem.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
We met a problem on AMD machines, when using "nr_cpus=4" for
kdump, and crash happens on cpus other than cpu0, kdump kernel
will fail to boot and eventually reset.
After some debugging, we found that it stuck at the kernel path
do_boot_cpu()-> ... ->wakeup_secondary_cpu_via_init():
apic_icr_write(APIC_INT_LEVELTRIG|APIC_INT_ASSERT|APIC_DM_INIT,
phys_apicid);
that is, it stuck at sending INIT from AP to BP and reset, which
is actually what "disable_cpu_apicid=X" tries to solve. Printing
the value of @phys_apicid showed that it was the value of "apicid"
other that of "initial apicid" showed by /proc/cpuinfo.
As described in x86 specification:
"In MP systems, the local APIC ID is also used as a processor ID by the
BIOS and the operating system. Some processors permit software to modify
the APIC ID. However, the ability of software to modify the APIC ID is
processor model specific. Because of this, operating system software
should avoid writing to the local APIC ID register. The value returned by
bits 31-24 of the EBX register (when the CPUID instruction is executed with a
source operand value of 1 in the EAX register) is always the Initial APIC ID
(determined by the platform initialization). This is true even if software
has changed the value in the Local APIC ID register."
From kernel commit 151e0c7de("x86, apic, kexec: Add disable_cpu_apicid
kernel parameter"), we can see in generic_processor_info(), it uses
a)read_apic_id() and b)@apicid to compare with @disabled_cpu_apicid.
a)@apicid which is actually @phys_apicid above-mentioned is from the
following calltrace(on the problematic AMD machine):
generic_processor_info+0x37/0x300
acpi_register_lapic+0x30/0x90
acpi_parse_lapic+0x40/0x50
acpi_table_parse_entries_array+0x171/0x1de
acpi_boot_init+0xed/0x50f
The value of @apicid(from acpi MADT) is equal to the value of "apicid"
showed by /proc/cpuinfo as proved by our debug printk.
b)read_apic_id() gets the value from LAPIC ID register which is "apicid"
as well.
While the value of "initial apicid" is from cpuid instruction.
One example of "apicid" and "initial apicid" of cpu0 from /proc/cpuinfo
on AMD machine:
apicid : 32
initial apicid : 0
Therefore, we should assign /proc/cpuifo "apicid" to "disable_cpu_apicid=X".
We've never met such issue before, because we usually tested "nr_cpus=1",
and mostly on Intel machines, and "apicid" and "initial apicid" have the
same value in most cases on Intel machines.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
I noticed that network is still enabled for local dumping,
like the following kdump boot message on my test machine
using local disk as the dump target:
tg3.c:v3.137 (May 11, 2014)
tg3 0000:02:00.0 eth2: Tigon3 [partno(BCM95720) rev
(PCI Express) MAC address c8:1f:66:c9:35:0d
tg3 0000:02:00.0 eth2: attached PHY is 5720C
After some debugging, found it due to a misuse in code below:
if [ is_generic_fence_kdump -o is_pcs_fence_kdump ]; then
_dep="$_dep network"
fi
The "if" condition always results in "true", and should be
changed as follows:
if is_generic_fence_kdump -o is_pcs_fence_kdump; then
_dep="$_dep network"
fi
After this, network won't be involved in non-network dumping,
as for dumpings require network such as nfs/ssh/iscsi/fcoe/etc,
dracut will add network accordingly. And kdump initramfs size
can be reduced from 24MB to 17MB tested on some real hardware,
and from 19MB to 14MB on my kvm. Moreover, it could avoid the
network (driver) initialization thereby saving us more memory.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
In case of only network target, we can clearly and safely
remove more unnecessary modules to reduce initramfs size,
and to enhance stability.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
In case of on dm related target, we can clearly and safely
remove many unnecessary modules to reduce initramfs size,
and to enhance stability.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Resolves: bz1451717
https://bugzilla.redhat.com/1451717
When there is no crypt related kdump target, we can safely
omit "crypt" dracut module, this can avoid the pop asking
disk password during kdump boot in some cases.
This patch introduces omit_dracut_modules() before calling
dracut, we can omit more modules to reduce initrd size in
the future.
We don't want to omit any module for fadump, thus we move
is_fadump_capable() into kdump-lib.sh as a helper to use.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Resolves: bz1451717
https://bugzilla.redhat.com/1451717
When there is any "rd.lvm.lv=X", "lvm" dracut module will
try to recognize all the lvm volumes which is unnecessary
and probably cause trouble for us.
See https://bugzilla.redhat.com/show_bug.cgi?id=1451717#c2
Remove all the rd.lvm.lv=X inherited from the kernel cmdline,
and generate the corresponding cmdline as needed for kdump.
Because prepare_cmdline() is only used by kdump, we don't need
to add any fadump judgement(also remove the existing judgement
in passing).
Currently, we don't handle "rd.lvm.vg=X", we can add it in
when there is some bug reported in the future.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Resolves: bz1451717
https://bugzilla.redhat.com/1451717
Now that we have get_kdump_targets(), use it to simplify the code.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Resolves: bz1451717
https://bugzilla.redhat.com/1451717
We need to know all the kdump targets including the dump
target and root in case of "dump_to_rootfs".
This is useful for us to do some extra work related to the
type of different targets.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Resolves: bz1451717
https://bugzilla.redhat.com/1451717
This patch improves get_block_dump_target as follows:
-Consider block device in the special "--dracut-args --mount ..."
in get_user_configured_dump_disk().
-Consider save path instead of root fs in get_block_dump_target(),
and move it into kdump-lib.sh because we will have another user
in the following patch.
-For nfs/ssh dumping, there is no need to check the root device.
-Move get_save_path into kdump-lib.sh.
After this patch, get_block_dump_target() can always return the
correct block dump target specified.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Description of problem
(https://bugzilla.redhat.com/show_bug.cgi?id=1465735):
Run `kdumpctl status` as normal user, get below error messages:
Another app is currently holding the kdump lock; waiting for it to exit...
flock: 9: Bad file descriptor
Another app is currently holding the kdump lock; waiting for it to exit...
flock: 9: Bad file descriptor
...
The bug is caused by behavior difference between bash
and sh (bash in posix).
In the function single_instance_lock in kdumpctl script,
there is
exec 9>/var/lock/kdump
which will fail in user mode. However, this fail will cause
script exiting under bash but not exiting under sh, causing
infinite loop because the flock will always fail.
According to the 16th item in
ftp://ftp.gnu.org/old-gnu/Manuals/bash-2.02/html_node/bashref_66.html
If a POSIX.2 special builtin returns an error status, a non-
interactive shell exits.
And according to
https://www.gnu.org/software/bash/manual/html_node/Special-Builtins.html
exec is one of the POSIX.2 special builtin's.
This patch fixes the bug by checking exec return value.
Fixes: 9fb2996d05 ("kdumpctl: change the shebang header to use /bin/bash")
Signed-off-by: Ziyue Yang <ziyang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Xunlei Pang <xlpang@redhat.com>
This patch fixes the whitespace errors reported by
'rpmlint' or 'fedpkg lint' when they are run on kexec-tools srpm:
kexec-tools.spec:242: W: mixed-use-of-spaces-and-tabs (spaces: line 107,
tab: line 242)
Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
The /sys/modules/*/drivers sysfs entries do not exist anymore on newer
kernels which means that the DRM moduels would never be included.
Instead check if there is any device with a "drm" sysfs directory to
decide on whether DRM modules need to be included.
Acked-by: Dave Young <dyoung@redhat.com>
fence_kdump_nodes should include list of cluster node(s) except localhost.
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
kdump should not send fence_kdump notifications to local host, because
the role of the falied node (i.e local host) is to send fence_kdump
notifications to other nodes to tell them I'm kdumping, tell to itself is
nonsense. And we have excluded hostname of local host but when one use ip
address we also need exclude it.
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
We met one issue that when changing softlink of "/usr/bin/sh"
to point to "ksh" instead of the default "bash", kdumpctl will
not work and go wrong.
kdumpctl is expected to run under bash like dracut, we should
change its shebang header from "#!/bin/sh" to "#!/bin/bash".
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
The "time kdumpctl start" command shows that strip_comments()
consumes lots of cpu time. By only calling it when necessary,
it saves us nearly half second.
Tested on my Fedora kvm machine.
Before this patch:
$ time kdumpctl start
kexec: loaded kdump kernel
Starting kdump: [OK]
real 0m1.849s
user 0m1.497s
sys 0m0.462s
After this patch:
$ time kdumpctl start
kexec: loaded kdump kernel
Starting kdump: [OK]
real 0m1.344s
user 0m1.195s
sys 0m0.195s
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Resolves: bz1449801
"cat $KDUMP_CONFIG_FILE|grep -v "^#"|while read ..." use pipes
to invoke subshells, as a result we met "the dreaded inaccessible
variables within a subshell problem" as described in the book
"Advanced Bash-Scripting Guide".
It cause regressions, so revert it.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
I found using "cat $KDUMP_CONFIG_FILE|grep -v "^#"|while read ..."
instead of "while read ... do ...; done < $KDUMP_CONFIG_FILE" will
make the script run faster, it saves us nearly half second.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Pratyush Anand <panand@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
We use faster "lsinitrd XXX -f usr/lib/dracut/build-parameter.txt"
instead of "lsinitrd XXX | grep "^Arguments:" | head -1", this can
save us around one second.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Pratyush Anand <panand@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Use the logic of dracut 04watchdog/module-setup.sh to check,
then we only need to compare the content of 00-watchdog.conf,
so we can save one operation of lsinitrd.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Pratyush Anand <panand@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
handle_mode_switch() can ensure the correct logic, so remove
the needless is_mode_switched(). This helps to save one slow
lsinitrd operation for each boot.
Improved backup_default_initrd() to judge DEFAULT_INITRD.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Pratyush Anand <panand@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Some cloud people complained that VM boot speed is slower than
Ubuntu and other distributions, after some debugging, we found
that one of the causes is kdump service starts too slow(7seconds
according to the test result on the test VM), actually there is
no "crashkernel=X" specified. Although kdump service is parallel,
it affects the speed more or less especially on VMs with few cpus,
which is unacceptable. It is even worse when kdump initramfs is
built out in case of no reserved memory at first boot.
Commit afa4a35d3 ("kdumpctrl: kdump feasibility should fail if no
crash memory") can actually solve this issue.
This patch is a supplement of above-mentioned commit, we bail out
start() even earlier in case of no reserved memory.
Also made some cosmatic changes for check_crash_mem_reserved().
1) Before this patch
$ time kdumpctl start
No memory reserved for crash kernel.
Starting kdump: [FAILED]
real 0m0.282s
user 0m0.184s
sys 0m0.146s
2) After this patch
$ time kdumpctl start
No memory reserved for crash kernel
Starting kdump: [FAILED]
real 0m0.010s
user 0m0.008s
sys 0m0.001s
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Pratyush Anand <panand@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
