Resolves: bz1561837
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1561837
Currently 'kdump.conf' and 'kdump.conf MAN page' entries state that the
local dump path should be:
<fs type> <partition>
- Will mount -t <fs type> <partition> <mnt>, and copy
/proc/vmcore to <mnt>/<path>/%DATE/.
The correct vmcore path instead should be:
<mnt>/<path>/%HOST_IP-%DATE/
Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
fence_kdump_nodes should include list of cluster node(s) except localhost.
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
This patch introduces the 'force_no_rebuild' option
inside the 'kdump.conf' and its handling inside the 'kdumpctl'
script.
There might be several use cases, where a system admin
decides that he doesn't need to rebuild the kdump initrd
and wants to use an existing version of the same. In such cases,
he can set the 'force_no_rebuild' option inside 'kdump.conf'
to 1, to force the 'kdumpctl' script not to rebuild the kdump
initrd.
Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
Acked-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Fix the typos and grammar problems in kdump.conf man page.
Reported-by: Donald Berry <dberry@redhat.com>
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
In case no target is specified explicitly in /etc/kdump.conf, the behavior
of path is changed, a check need be taken to see if any separate file
system is mounted on any tier of 'path', and also to take the relevant
action. Now the path section need be renewed for kdump.conf and its
man page accordingly.
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Adds two new options to kdump.conf to be able to configure fence_kdump
support for generic clusters:
fence_kdump_args <arg(s)>
- Command line arguments for fence_kdump_send (it can contain all
valid arguments except hosts to send notification to)
fence_kdump_nodes <node(s)>
- List of cluster node(s) separated by space to send fence_kdump
notification to (this option is mandatory to enable fence_kdump)
Generic clusters fence_kdump configuration take precedence over older
method of fence_kdump configuration for Pacemaker clusters. It means
that if fence_kdump is configured using above options in kdump.conf, old
Pacemaker configuration is not used even if it exists.
Bug-Url: https://bugzilla.redhat.com/1078134
Signed-off-by: Martin Perina <mperina@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Lzo is proven faster than zlib, for large memory machine it will
extremely shorten the time for saving vmcore. Let's switch to lzo as the
default compression method for makedumpfile.
The drawback is lzo has a little less compression ratio than zlib. But
considering for most users, speed/time is a more serious concern than
vmcore size. So I think default to lzo will benefit most of the users.
v1->v2: update kdump.conf.5 [DaveY]
Signed-off-by: WANG Chao <chaowang@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
mkdumprd call dracut to rebuilding kdump initrd, sometimes passing extra
dracut args is helpful. For example user can enable debug output with
--debug, --printsize to print roughly increased initramfs size by each module,
--omit-drivers to omit kernel modules, etc.
This patch enables dracut_args option for passing extra args to dracut.
Also it modifies add_dracut_arg() to treat a string with-in quote as single
string because for dracut options which has its own args, the args need to be
quoted and space seperated.
If add_dracut_arg() gets an string read from kdump.conf and if that string
contains double quotes, then while converting to positional parameters
those double quotes are not interpreted. Hence if /etc/kdump.conf contains
following.
dracut_args --add-drivers "driver1 driver2"
then add_dracut_args() sees following positional parameters
$1= --add-drivers
$2= "driver1
$3= driver2"
Notice, double quotes have been ignored and parameters have been broken
based on white space.
Modify add_dracut_arg() to look for parameters starting with " and
if one is found, it tries to merge all the next parameters till one
is found with ending double quote. Hence effectively simulating
following behavior.
$1= --add-drivers
$2= "driver1 driver2"
[v1->v2]: address quoted substring in dracut_args, also handle the leading
and ending spaces in substring.
[v2->v3]: fix dracut arguments seperator in kdump.conf.
[v3->v4]: improve changelog, thanks vivek.
[v4->v5]: make the manpage more verbose [vivek].
Tested with below dracut_args test cases:
1. dracut_args --add-drivers "pcspkr virtio_net" --omit-drivers "sdhci-pci hid-logitech-dj e1000"
2. dracut_args --add-drivers " pcspkr virtio_net " --omit-drivers "sdhci-pci hid-logitech-dj e1000"
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Some Smart Array (hpsa/cciss) adapters don't support reset, we need
to disable kdump on those devices, like rhel6 did.
In this patch, the dump target is checked according to below
criteria if it's a block device.
If it's cciss disk but is resettbale, can be used as dump target.
If it's cciss disk but is not resettable, can not be used as dump
target.
If it's cciss disk and not resettable, but user set OVERRIDE_RESETTABLE
to 1 in /etc/sysconfig/kdump, can be taken as dump target. Because
user know the situation and want to have a try.
In this patch, added codes include 4 parts:
1)Add an option "override_resettable <0 | 1>" into kdump.conf, and
add related section into kdump.conf man page. In mkdumprd, will check
whether user has set a value, get that value if yes. By default, the
value is 0.
2)port utility functions from dracut-functions.sh.
3)The check_resettable function checks if dump target is a resettable
block device. This includes the case where default action dump_to_rootfs
is set.
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Current blacklist option is different from the option in rhel6. In current
implementation blacklist just means omit the driver, but it should really
be preventing it being loaded in initramfs.
To keep consistent, just make the option as deprecated. User is suggested
to user dracut kernel cmdline rd.driver.blacklist instead.
[v1->v2]: improve man page description, thanks Vivek.
Tested in kvm guest with rd.driver.blacklist in kdump sysconfig
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Firstly rename dump_rootfs to dump_to_rootfs to remove the ambiguity
about dump_rootfs. Then add it as one of default options. That means
user can specify dump_to_rootfs to be default action manually, then
it will take action when specified target dump failed.
Secondly, in rhel7 and fedora, when default action is not specified,
the default 'default' is dump_to_rootfs. Namely when specified target
dump failed, the kdump initrd will mount root and save kdump from
initramfs context. However in rhel6, the default 'default' is 'reboot'.
That means when specified target dump failed, the kdump initrd will
reboot systems. For being consistent with rhel6, change the default
'default' back to 'reboot'. And this can also keep logic simple, easier
to understand. Primarily, Our default dump target is root filesystem.
So keeping "default" as "dump_to_rootfs" and trying to dump to root
filesystem again when first attempt fails does not make much sense.
Meanwhile add the relevant description into kdump.conf,kdump.conf.5
and kexec-kdump-howto.txt.
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Add a function check_config to check kdump config file.
1. move multi dump target checking into this function
2. check invalid config options and obsolete config options
3. check null config value.
[v2->v3]: add detail doc about deprecated options in kdump.conf manpage.
[v3->v4]: print out the bad config option in case it is not valid.
[v4->v5]: improve documentation according to comments from Vivek.
[v5->v6]: s/Deprecated/Invalid for invalid config options.
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Marc Milgram <mmilgram@redhat.com>
For devices with filesystem, udev /dev/disk/by-uuid/* links are usually
reliable. But one exception is multipath devices, child and top layer
device may have same uuid.
As dm devices maintain /dev/mapper/* as persistent names, so converting to
/dev/mapper/* firstly then try by-uuid/* and by-id/*
Also because user know better what's the persistent name we just document well
to suggest user use persistent name in kdump.conf. it's suggested to
to use lvm or multipath canonical names or uuid/label.
Updated kdump.conf examples and related chunks in kexec-kdump-howto.txt
use lvm /dev/vg/<devname> in examples
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Copy comments from the bz:
In rhel7 onwards, we will require dump target filesystem to be mounted in first kernel so that kdump can make use of same mount options instead of trying to come up with its own mount options. This should make mounting that file system safer. Also it reduces complexity in kdump code.
That will mean one needs to put an entry for the dump file system in /etc/fstab
so that after reboot when kdump service starts, it can find the dump target and build initramfs instead of failing.
Add force_rebuild option in kdump.conf
Some user need always force rebuild the dumprd, add an kdump.conf
option force_rebuild here. If force_rebuild is set to 1
kdump initrd will be rebuilt every time then the service starts.
Testing:
Tested below cases:
force_rebuild
force_rebuild 0
force_rebuild 1
force_rebuild 2
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Currently net options means either nfs or ssh dump.
Better to split these two into standalone options. That's more clear to user.
after the split, ssh dump need user specify "ssh user@host"
nfs dump need user specify "nfs host:nfsshare"
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
For the "blacklist" here, it means prevent the kernel modules
from loading into kdump initrd, which is different from RHEL6.
Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Original patch is from Amerigo, but it has changed a lot:
remove multi dump
refreshed with latest git for the dump instruction function restructure
fixed the behavior of do_kdump_pre, if kdump_pre fails it will reboot
update the docs
check the existance and executable of kdump_pre/post files,
also check the timestamp of them for rebuilding.
refresh patch,
Address comments from vivek:
s/hush/bash in docs
fix the copy-paste error in kdump post error message
s/reboot\/halt/reboot in kexec-kdump-howto.txt
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
1. add core_collector filter support to ssh dump
2. scp can be specified in kdump.conf
3. error out if no '-F' with makedumpfile
4. add proper explanation and examples to kdump.conf[.5] and kexec-kdump-howto.txt.
v1->v2: add verify_core_collector function
v2->v3: optimize the code, remove local variable for default core_collector
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Update core_collector in kdump.conf[.5]:
1. accept <command> not limited to makedumpfile
2. add notes about default core_collector
3. add notes about flattened vmcore
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
disk_timeout should be handled by dracut. remove it from kdump.conf[.5]
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Default shell of kdump module is bash instead of msh, fix the doc
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
If default action is not set kdump will by default dump to root fs
Fix kdump.conf[.5] about this issue
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
kernel module options is not implemented yet, remove them from kdump.conf.5
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
kdump_post and kdump_pre are not implemented, remove them from kdump.conf[.5]
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Dracut and udev handles bringing up network, remove the legacy link_delay
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
