Resolves: bz1924115
Conflict: None
Upstream: Fedora
commit 97930d3cca
Author: Kairui Song <kasong@redhat.com>
Date: Mon Jun 28 13:57:27 2021 +0800
fadump-init: clean up mount points properly
When running with squash module enabled for both initramfs, /dev and
/run are also mounted by squash-init, so move them to newroot as well,
else they might leak.
Also pass `-d` to umount so loop devices (if used) will be force freed.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
Resolves: bz1924115
Conflict: None
Upstream: Fedora
commit bf6671b60d
Author: Kairui Song <kasong@redhat.com>
Date: Fri Jun 25 14:44:45 2021 +0800
fadump: kdumpctl should check the modules used by the fadump initramfs
After fadump embedded the fadump initramfs in the normal initramfs,
kdumpctl will mistakenly rebuild the initramfs everytime.
kdumpctl checks the hostonly-kernel-modules.txt file in initramfs
to check if required drivers are included, but the normal initramfs
is built in non-hostonly mode, so it doesn't have a
hostonly-kernel-modules.txt file. The check will always fail.
So let mkfadumprd make a copy of the hostonly-kernel-modules.txt in the
fadump initramfs and let kdumpctl check that file instead.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
Resolves: bz1924115
Conflict: None
Upstream: Fedora
commit fa9201b240 (devel)
Author: Hari Bathini <hbathini@linux.ibm.com>
Date: Wed Jun 23 20:06:48 2021 +0530
fadump: isolate fadump initramfs image within the default one
In case of fadump, the initramfs image has to be built to boot into
the production environment as well as to offload the active crash dump
to the specified dump target (for boot after crash). As the same image
would be used for both boot scenarios, it could not be built optimally
while accommodating both cases.
Use --include to include the initramfs image built for offloading
active crash dump to the specified dump target. Also, introduce a new
out-of-tree dracut module (99zz-fadumpinit) that installs a customized
init program while moving the default /init to /init.dracut. This
customized init program is leveraged to isolate fadump image within
the default initramfs image by kicking off default boot process
(exec /init.dracut) for regular boot scenario and activating fadump
initramfs image, if the system is booting after a crash.
If squash is available, ensure default initramfs image is also built
with squash module to reduce memory consumption in capture kernel.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
Resolves: bz1972463
Conflict: None
Upstream: Fedora
commit 2603ba7187 (origin/rawhide, rawhide)
Author: Kairui Song <kasong@redhat.com>
Date: Fri Jul 2 03:27:05 2021 +0800
Cleanup dead systemd services before start sysroot.mount
When kdump failed due to initqueue timeout, the sysroot.mount and other
serivces could be stuck in `start` but `dead` status:
Example output of systemctl:
dev-disk-by\x2duuid-530830d1\x2df2c7\x2d4c9a\x2d9a82\x2d148609097521.device loaded inactive dead start
<... snip ...>
squash-root.mount loaded active mounted /squash/root
squash.mount loaded active mounted /squash
sysroot.mount loaded inactive dead start /sysroot
<... snip ...>
dracut-cmdline.service loaded active exited dracut cmdline hook
dracut-initqueue.service loaded activating start start dracut initqueue hook
dracut-mount.service loaded inactive dead start dracut mount hook
At this point calling `systemctl start sysroot.mount` will just hang as
systemd will just wait for the services that are stuck in `start`
status. So call `systemctl cancel` here to cancel all pending jobs and
have a clean start for mounting sysroot.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
Resolves: bz1974638
Upstream: Fedora
Conflict: Minor conflict in spec file resolved easily
commit 6463641935
Author: Kairui Song <kasong@redhat.com>
Date: Thu Jun 10 13:06:23 2021 +0800
Add a new hook: 92-crashkernel.install
To track and manage kernel's crashkernel usage by kernel version,
each kernel package will include a crashkernel.default containing the
default `crashkernel=` value of that kernel. So we can use a hook to
update the kernel cmdline of new installed kernel accordingly.
Put it after all other grub boot loader setup hooks, so it can simply
call grubby to modify the kernel cmdline.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
Resolves: bz1974638
Upstream: Fedora
Conflict: None
commit 86130ec10f
Author: Kairui Song <kasong@redhat.com>
Date: Thu Jun 10 13:06:22 2021 +0800
kdumpctl: Add kdumpctl reset-crashkernel
In newer kernel, crashkernel.default will contain the default
crashkernel value of a kernel build. So introduce a new sub command
to help user reset kernel crashkernel size to the default value.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
Resolves: bz1974638
Upstream: Fedora
Conflict: None
commit 017903c3c4
Author: Kairui Song <kasong@redhat.com>
Date: Fri Jun 25 03:42:19 2021 +0800
Revert "kdump-lib.sh: Remove is_atomic"
Now we need this helper again, for `reset-crashkernel`
This reverts commit ff46cfb19e.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
Related: bz1977543
Upstream: Fedora
Conflict: None
commit ad6f60d70d
Author: Coiby Xu <coxu@redhat.com>
Date: Mon Jun 28 18:37:11 2021 +0800
fix format issue in find_online_znet_device
Change spaces to tab to fix alignment issue.
Fixes: commit 7d47251568
("Iterate /sys/bus/ccwgroup/devices to tell if we should set up rd.znet")
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Resolves: bz1977543
Upstream: Fedora
Conflict: None
commit 03f9b91351
Author: Coiby Xu <coxu@redhat.com>
Date: Mon Jun 28 18:37:10 2021 +0800
check the existence of /sys/bus/ccwgroup/devices before trying to find online network device
/sys/bus/ccwgroup/devices doesn't exist for non-s390x machines which leads to
the warning "find: '/sys/bus/ccwgroup/devices': No such file or directory".
This warning can be eliminated by checking the existence of
"/sys/bus/ccwgroup/devices" beforehand.
Fixes: commit 7d47251568
("Iterate /sys/bus/ccwgroup/devices to tell if we should set up rd.znet")
Reported-by: Ruowen Qin <ruqin@redhat.com>
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1974618
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Resolves: bz1974178
Upstream: Fedora
Conflict: None
commit 9a6f589d99dcef114c89fde992157f5467028c8f
Author: Tao Liu <ltao@redhat.com>
Date: Fri Jun 18 18:28:04 2021 +0800
[PATCH] check for invalid physical address of /proc/kcore when making ELF dumpfile
Previously when executing makedumpfile with -E option against
/proc/kcore, makedumpfile will fail:
# makedumpfile -E -d 31 /proc/kcore kcore.dump
...
write_elf_load_segment: Can't convert physaddr(ffffffffffffffff) to an offset.
makedumpfile Failed.
It's because /proc/kcore contains PT_LOAD program headers which have
physaddr (0xffffffffffffffff). With -E option, makedumpfile will
try to convert the physaddr to an offset and fails.
Skip the PT_LOAD program headers which have such physaddr.
Signed-off-by: Tao Liu <ltao@redhat.com>
Signed-off-by: Kazuhito Hagio <k-hagio-ab@nec.com>
Signed-off-by: Tao Liu <ltao@redhat.com>
Resolves: bz1972464
Upstream: Fedora
Conflict: None
commit 646456862df8926ba10dd7330abf3bf0f887e1b6
Author: Kazuhito Hagio <k-hagio-ab@nec.com>
Date: Wed May 26 14:31:26 2021 +0900
[PATCH] Increase SECTION_MAP_LAST_BIT to 5
* Required for kernel 5.12
Kernel commit 1f90a3477df3 ("mm: teach pfn_to_online_page() about
ZONE_DEVICE section collisions") added a section flag
(SECTION_TAINT_ZONE_DEVICE) and causes makedumpfile an error on
some machines like this:
__vtop4_x86_64: Can't get a valid pmd_pte.
readmem: Can't convert a virtual address(ffffe2bdc2000000) to physical address.
readmem: type_addr: 0, addr:ffffe2bdc2000000, size:32768
__exclude_unnecessary_pages: Can't read the buffer of struct page.
create_2nd_bitmap: Can't exclude unnecessary pages.
Increase SECTION_MAP_LAST_BIT to 5 to fix this. The bit had not
been used until the change, so we can just increase the value.
Signed-off-by: Kazuhito Hagio <k-hagio-ab@nec.com>
Signed-off-by: Tao Liu <ltao@redhat.com>
Resolves: bz1975632
Upstream: Fedora
Conflict: None
commit 6137956f79
Author: Kairui Song <kasong@redhat.com>
Date: Wed Apr 14 13:41:19 2021 +0800
kdumpctl: fix check_config error when kdump.conf is empty
Kdump scirpt already have default values for core_collector, path in
many other place. Empty kdump.conf still works. Fix this corner case and
fix the error message.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
Signed-off-by: Tao Liu <ltao@redhat.com>
Resolves: bz1968374
Upstream: Fedora
Conflict: None
commit 39a642b66b
Author: Hari Bathini <hbathini@linux.ibm.com>
Date: Tue Jun 1 16:46:58 2021 +0530
kdump-lib.sh: fix a warning in prepare_kdump_bootinfo()
Fix the warning observed when KDUMP_KERNELVER is specified:
kdumpctl[10926]: /lib/kdump/kdump-lib.sh: line 697: [: missing `]'
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Resolves: bz1965952
Upstream: Fedora
Conflict: None
commit 75bdcb7399
Author: Kelvin Fan <kfan@redhat.com>
Date: Fri Apr 16 22:31:13 2021 +0000
Write to `/var/lib/kdump` if $KDUMP_BOOTDIR not writable
The `/boot` directory on some operating systems might be read-only.
If we cannot write to `$KDUMP_BOOTDIR` when generating the kdump
initrd, attempt to place the generated initrd at `/var/lib/kdump`
instead.
Signed-off by: Kelvin Fan <kelvinfan001@gmail.com>
Acked-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Tao Liu <ltao@redhat.com>
Resolves: bz1941905
Upstream: Fedora
Conflict: None
commit 7d47251568
Author: Coiby Xu <coxu@redhat.com>
Date: Mon Jun 7 07:26:03 2021 +0800
Iterate /sys/bus/ccwgroup/devices to tell if we should set up rd.znet
This patch fixes bz1941106 and bz1941905 which passed empty rd.znet to the
kernel command line in the following cases,
- The IBM (Z15) KVM guest uses virtio for all devices including network
device, so there is no znet device for IBM KVM guest. So we can't
assume a s390x machine always has a znet device.
- When a bridged network is used, kexec-tools tries to obtain the znet
configuration from the ifcfg script of the bridged network rather than
from the ifcfg script of znet device.
We can iterate /sys/bus/ccwgroup/devices to tell if there if there is
a znet network device. By getting an ifname from znet, we can also avoid
mistaking the slave netdev as a znet network device in a bridged network
or bonded network.
Note: This patch also assumes there is only one znet device as commit
7148c0a30d ("add s390x netdev setup")
which greatly simplifies the code. According to IBM [1], there could be
more than znet devices for a z/VM system and a z/VM system may have a
non-znet network device like ConnectX. Since kdump_setup_znet was
introduced in 2012 and so far there is no known customer complaint that
invalidates this assumption I think it's safe to assume an IBM z/VM
system only has one znet device. Besides, there is no z/VM system found
on beaker to test the alternative scenarios.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1941905#c13
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Resolves: bz1901024
Upstream: Fedora
Conflict: None
commit 41980f30d9
Author: Kairui Song <kasong@redhat.com>
Date: Mon Apr 26 17:09:57 2021 +0800
Use a customized emergency shell
Use a modified and minimized version of emergency shell.
The differences of this kdump shell and dracut emergency shell are:
- Kdump shell won't generate a rdsosreport automatically
- Customized prompts
- Never ask root password
- Won't tangle with dracut's emergency_action. If emergency_action is
set, dracut emergency shell will perform dracut's emergency_action
instead of kdump final_action on exit.
- If rd.shell=no is set, kdump shell will still work, dracut emergency
shell won't, even if kdump failure_action is set to shell.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
Resolves: bz1901024
Upstream: Fedora
Conflict: None
commit a2306346bc
Author: Kairui Song <kasong@redhat.com>
Date: Mon Apr 26 17:09:56 2021 +0800
Remove the kdump error handler isolation wrapper
The wrapper is introduced in commit 002337c, according to the commit
message, the only usage of the wrapper is when dracut-initqueue calls
"systemctl start emergency" directly. In that case, emergency
is started, but not in a isolation mode, which means dracut-initqueue
is still running. On the other hand, emergency will call
"systemctl start dracut-initqueue" again when default action is dump_to_rootfs.
systemd would block on the last dracut-initqueue, waiting for the first
instance to exit, which leaves us hang.
In previous commit we added initqueue status detect in dump_to_rootfs,
so now even without the wrapper, it will not hang.
And actually, previously, with the wrapper, emergency might still hang
for like 30s. When dracut called emergency service because initqueue
timed out, dump_to_rootfs will try start initqueue again and timeout
again. Now with the wrapper removed, we can avoid these two kinds of
hangs, bacause without the isolation we can detect initqueue service
status correctly in such case.
Also remove the invalid header comments in service file, the service
is not part of systemd code. And sync the service spec with dracut.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
Resolves: bz1901024
Upstream: Fedora
Conflict: None
commit 108258139a
Author: Kairui Song <kasong@redhat.com>
Date: Mon Apr 26 17:09:55 2021 +0800
Don's try to restart dracut-initqueue if it's already there
kdump's dump_to_rootfs will try to start initqueue unconditionally.
dump_to_rootfs will run after systemd isolate to emergency
target, so this is currently accetable.
But there is a problem when initqueue starts the emergency action
because of initqueue timeout. dump_to_rootfs will start initqueue and
lead to timeout again.
So following patch will remove the previous isolation wrapper, and
detect the service status here. Previous isolation makes the detection
impossible. Now this detection will be valid and helpful to prevent
double timeout or hang.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
Resolves: bz1952342
Upstream: Fedora
Conflict: None
commit 45377836b0
Author: Pingfan Liu <piliu@redhat.com>
Date: Tue May 25 09:26:09 2021 +0800
kdump-lib.sh: fix the case if no enough total RAM for kdump in get_recommend_size()
For crashkernel=auto policy, if total RAM size is under a throttle,
there is no memory reserved for kdump.
Also correct a trivial bug by correcting the arch name.
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Resolves: bz1951415
Upstream: fedora
Conflict: none
commit e9e6a2c745
Author: Kairui Song <kasong@redhat.com>
Date: Thu Apr 22 03:27:10 2021 +0800
kdumpctl: Add kdumpctl estimate
Add a rough esitimation support, currently, following memory usage are
checked by this sub command:
- System RAM
- Kdump Initramfs size
- Kdump Kernel image size
- Kdump Kernel module size
- Kdump userspace user and other runtime allocated memory (currently
simply using a fixed value: 64M)
- LUKS encryption memory usage
The output of kdumpctl estimate looks like this:
# kdumpctl estimate
Reserved crashkernel: 256M
Recommanded crashkernel: 160M
Kernel image size: 47M
Kernel modules size: 12M
Initramfs size: 19M
Runtime reservation: 64M
Large modules:
xfs: 1892352
nouveau: 2318336
And if the kdump target is encrypted:
# kdumpctl estimate
Encrypted kdump target requires extra memory, assuming using the keyslot with minimun memory requirement
Reserved crashkernel: 256M
Recommanded crashkernel: 655M
Kernel image size: 47M
Kernel modules size: 12M
Initramfs size: 19M
Runtime reservation: 64M
LUKS required size: 512M
Large modules:
xfs: 1892352
nouveau: 2318336
WARNING: Current crashkernel size is lower than recommanded size 655M.
The "Recommanded" value is calculated based on memory usages mentioned
above, and will be adjusted accodingly to be no less than the value provided
by kdump_get_arch_recommend_size.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
Resolves: bz1951415
Upstream: fedora
Conflict: None
commit 85c725813b
Author: Kairui Song <kasong@redhat.com>
Date: Thu Apr 8 01:41:21 2021 +0800
mkdumprd: make use of the new get_luks_crypt_dev helper
Simplfy the code and also improve the performance. udevadm call is
heavy.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
Resolves: bz1951415
Upstream: fedora
Conflict: None
commit 1c70cf51c7
Author: Kairui Song <kasong@redhat.com>
Date: Tue May 18 16:13:16 2021 +0800
kdump-lib.sh: introduce a helper to get all crypt dev used by kdump
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
Resolves: bz1896247
Upstream: fedora
Conflict: none
commit ee160bf04d
Author: Kairui Song <kasong@redhat.com>
Date: Mon Apr 19 23:00:10 2021 +0800
Revert "Always set vm.zone_reclaim_mode = 3 in kdump kernel"
This reverts commit 5633e83318.
vm.zone_reclaim_mode may cause trashing on some machines. And after
second thought, vm.zone_reclaim_mode is barely helpful for machines
with high mem stress, so just revert it.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
Resolves: bz1952652
Upstream: fedora
Conflict: none
commit d0e9c51e0d
Author: Hari Bathini <hbathini@linux.ibm.com>
Date: Thu Apr 22 18:21:59 2021 +0530
fadump: fix dump capture failure to root disk
If the dump target is the root disk, kdump scripts add an entry in
/etc/fstab for root disk with /sysroot as the mount point. The root
disk, passed through root=<> kernel commandline parameter, is mounted
at /sysroot in read-only mode before switching from initial ramdisk.
So, in fadump mode, a remount of /sysroot to read-write mode is needed
to capture dump successfully, because /sysroot is already mounted as
read-only based on root=<> boot parameter.
Commit e8ef4db8ff ("Fix dump_fs mount point detection and fallback
mount") removed initialization of $_op variable, the variable holding
the options the dump target was mounted with, leading to the below
error as remount was skipped:
kdump[586]: saving to /sysroot/var/crash/127.0.0.1-2021-04-22-07:22:08/
kdump.sh[587]: mkdir: cannot create directory '/sysroot/var/crash/127.0.0.1-2021-04-22-07:22:08/': Read-only file system
kdump[589]: saving vmcore failed
Restore $_op variable initialization in dump_fs() function to fix this.
Fixes: e8ef4db8ff ("Fix dump_fs mount point detection and fallback mount")
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Tao Liu <ltao@redhat.com>
Resolves: bz1924116
Upstream: fedora
Conflict: none
commit 6a2e820d87
Author: Sourabh Jain <sourabhjain@linux.ibm.com>
Date: Sun Feb 21 17:23:37 2021 +0530
Stop reloading kdump service on CPU hotplug event for FADump
As FADump does not require an explicit elfcorehdr update whenever there is CPU
hotplug event so let's stop kdump service reload for FADump when CPU hotplug
event is triggered.
A new label is added to handle CPU and memory hotplug events separately. The
updated CPU hotplug event handler make sure that kdump service should not be
reloaded when FADump is configured.
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Reviewed-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Tao Liu <ltao@redhat.com>
Resolves: bz1947928
Upstream: fedora
Conflict: none
commit 475e33030b
Author: Tao Liu <ltao@redhat.com>
Date: Sun Apr 25 17:05:42 2021 +0800
Make dracut-squash required for kexec-tools
This patch reverts commit "Make dracut-squash a weak dep".
Although kexec-tools can work without dracut-squash, it is essential
for kdump to run properly in cases [1][2] where minimal amount of memory
consumption is expected. Thus dracut-squash is needed for it.
[1] https://lists.fedoraproject.org/archives/list/kexec@lists.fedoraproject.org/message/SJX7CW3WLOYSFI2YJKGTUGDBWSCMZXVZ/
[2] https://www.spinics.net/lists/systemd-devel/msg05864.html
Signed-off-by: Tao Liu <ltao@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Tao Liu <ltao@redhat.com>
Resolves: bz1955453
Upstream: fedora
Conflict: none
commit ca05b754af
Author: Tao Liu <ltao@redhat.com>
Date: Mon May 10 22:10:26 2021 +0800
Fix incorrect file permissions of vmcore-dmesg-incomplete.txt
vmcore-dmesg-incomplete.txt is generated by shell redirection,
which taking the default umask value. When dmesg collector exits
with non-zero, the file will exist and anyone can have access to
it.
This patch fixed the issue by chmod the file, making it accessible
only to its owner.
Signed-off-by: Tao Liu <ltao@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Tao Liu <ltao@redhat.com>
Resolves: bz1950885
Upstream: fedora
Conflict: none
commit d5fe96cd7a
Author: Tao Liu <ltao@redhat.com>
Date: Tue Apr 27 17:58:40 2021 +0800
Disable CMA in kdump 2nd kernel
kexec-tools needs to disable CMA for kdump kernel cmdline,
otherwise kdump kernel may run out of memory.
This patch strips the inherited cma=, hugetlb_cma= cmd
line from 1st kernel, and sets to be 0 for 2nd kernel.
Signed-off-by: Tao Liu <ltao@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Tao Liu <ltao@redhat.com>
Resolves: bz1919052
Upstream: Fedora
Conflict: None
commit d5f6d38173
Author: Coiby Xu <coxu@redhat.com>
Date: Thu Apr 1 15:32:13 2021 +0800
Set up bond cmdline by "nmcli --get-values"
Now kdumpctl will exit if failing to set up bond cmdline.
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Resolves: bz1919052
Upstream: Fedora
Conflict: None
commit 8b08b4f17b
Author: Coiby Xu <coxu@redhat.com>
Date: Thu Apr 1 15:32:11 2021 +0800
Set up s390 znet cmdline by "nmcli --get-values"
Now kdumpctl will abort when failing to set up znet.
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Resolves: bz1919052
Upstream: Fedora
Conflict: None
commit 10c309b5f7
Author: Coiby Xu <coxu@redhat.com>
Date: Thu Apr 1 15:32:08 2021 +0800
Add helper to get value by field using "nmcli --get-values"
nmcli --get-values <field> connection show /org/freedesktop/NetworkManager/ActiveConnection/1
returns the following value for the corresponding field respectively,
Field Value
IP4.DNS "10.19.42.41 | 10.11.5.19 | 10.5.30.160"
802-3-ethernet.s390-subchannels ""
bond.options "mode=balance-rr"
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
