For ppc64(le), the default behavior of kexec always copy "root=" param,
but if dump target is ssh, there will no tools installed in kdump
rd, which help to mount root. As a result, kdump service will fail to
start. So explicitly disable the default behavior with --dt_no_old_root
option.
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
When core_collector is changed, the kdump initramfs needs to
be rebuilt before it is loaded.
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Kdump always use _proto=dhcp for both ipv4 and ipv6. But for ipv6
the dhcp address assignment is not like ipv4, there are different ways
for it, stateless and stateful, see below document:
https://fedoraproject.org/wiki/IPv6Guide
In case stateless, kernel can do the address assignment, dracut use
_proto=auto6; for stateful case, dracut use _proto=dhcp6.
We do not see bug reports before because for the most auto6 cases
kernel assign ip address before dhclient, kdump just happened to work.
Here we use auto6 if possible first. And we take the assumption that
host use auto6 if /proc/sys/net/ipv6/conf/$netdev/autoconf is enabled
Signed-off-by: Pingfan Liu <piliu@redhat.com>
When using "dracut_args --mount" to specify dump target, e.g. nfs like:
path /
core_collector makedumpfile -d 31
dracut_args --mount "host:/path /var/crash nfs defaults"
kdump service should neither guarantees the correctness, nor relabels it.
For current code, since dracut_args dump targets are likely not mounted
so kdump service mistakenly relabel the rootfs, which is meanless and
takes very long time.
Signed-off-by: Pingfan Liu <piliu@redhat.com>
This reverts commit 2040103bd7.
Reason is it's based on the environment of 1st kernel where all
present devices could be active and initialized during bootup.
Then all pci devices will request irqs. While kdump only brings
up those devices which are necessary for vmcore dumping. So this
commit is not meaningful and helpless to very large extent. And
it will print out 'Warning' when calculated result is larger than
1 cpu, actually it's a false positive report most of the time.
So revert the commit, and can check the git history for later
reference.
[dyoung]: on some machine this warning message shows up but
later we found the irq numbers with and without nr_cpus=1 is
quite different so this need more investigation since
the formula is not accurate.
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Due to the following commit in dracut, which splits out hostonly modules
commit 5ce7cc7337a4c769b223152c083914f2052aa348
Author: Harald Hoyer <harald@redhat.com>
Date: Mon Jul 10 13:28:40 2017 +0200
add 90multipath-hostonly module
hardcoding the wwid of the drives in the initramfs causes problems
when the drives are cloned to a system with the same hardware, but
different disk wwid's
https://bugzilla.redhat.com/show_bug.cgi?id=1457311
So kdump should decide whether to include the hostonly module.
The multipath-hostonly can help kdump to include only the needed mpath device,
in order to use less memory by 2nd kernel.
---- The performance -----
before this patch
[root@localhost ~]# time kdumpctl start
Detected change(s) in the following file(s):
/etc/kdump.conf
Rebuilding /boot/initramfs-4.13.9-300.fc27.x86_64kdump.img
kexec: loaded kdump kernel
Starting kdump: [OK]
real 0m12.485s
user 0m10.096s
sys 0m1.887s
after this patch
root@localhost ~]# time kdumpctl start
Detected change(s) in the following file(s):
/etc/kdump.conf
Rebuilding /boot/initramfs-4.13.9-300.fc27.x86_64kdump.img
kexec: loaded kdump kernel
Starting kdump: [OK]
real 0m15.839s
user 0m13.015s
sys 0m1.853s
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
This reverts commit 8e3b6475c9.
After reading the background of bugzilla:
https://bugzilla.redhat.com/show_bug.cgi?id=1510922
It is not a problem actually, sorry for the noise.
Although root set different "PATH" can lead to wrong script, but it is
different with what the bug described "current working dir" and it is
not a problem worth an update
Since we call dracut directly on current working directory "." so it is
possible to trick root to call fake code.
Thus move to use absolute path instead.
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Bhupesh Sharma <bhsharma@redhat.com>
Resolves: BZ1484945
https://bugzilla.redhat.com/show_bug.cgi?id=1484945
Currently the kdumpctl script doesn't handle
whitespaces (including TABs) which might be there before
an option name in the kdump.conf
This patch addresses this issue, by ensuring that the
kdumpctl errors out in case it finds any stray space(s)
or tab(s) before a option name.
Reported-by: Kenneth D'souza <kdsouza@redhat.com>
Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
Acked-by: Pratyush Anand <panand@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
This commit eliminates a redundant kdump_get_mac_addr call in
kdump_setup_netdev.
Signed-off-by: Ziyue Yang <ziyang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Currently in Fedora/RedHat dracut installs its fedora.conf.example
as the default config file, in which sysloglvl is set 5. This leads
to maxloglvl=5 in dracut calls, making unnecessary lsinitrd calls
during initramfs builds by kdump.
This patch makes use of
https://github.com/dracutdevs/dracut/pull/272
and disables lsinitrd logging by giving "-q" option to dracut,
eliminating unnecessary lsinitrd calls in dracut.
1) Before this patch
$ kdumpctl stop; touch /etc/kdump.conf; time kdumpctl start
kexec: unloaded kdump kernel
Stopping kdump: [OK]
Detected change(s) in the following file(s):
/etc/kdump.conf
Rebuilding /boot/initramfs-4.13.0-0.rc1.git4.1.fc27.x86_64kdump.img
kexec: loaded kdump kernel
Starting kdump: [OK]
real 0m26.824s
user 0m9.958s
sys 0m15.106s
2) After this patch
$ kdumpctl stop; touch /etc/kdump.conf; time kdumpctl start
kexec: unloaded kdump kernel
Stopping kdump: [OK]
Detected change(s) in the following file(s):
/etc/kdump.conf
Rebuilding /boot/initramfs-4.13.0-0.rc1.git4.1.fc27.x86_64kdump.img
kexec: loaded kdump kernel
Starting kdump: [OK]
real 0m20.420s
user 0m8.385s
sys 0m10.468s
[dyoung]:
- rewrite patch subject
Signed-off-by: Ziyue Yang <ziyang@redhat.com>
Reviewed-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
mkdumprd removes "noauto" mount option, but it also mistakenly removes
"noauto" within a string. For example ext4 has mount option noauto_da_alloc
mkdumprd will replace it with _da_alloc.
Use '\b' to match a whole word of "noauto" to fix it.
Also do same for s/ro/rw for same reason.
Signed-off-by: Dave Young <dyoung@redhat.com>
Reveiwed-by: Xunlei Pang <xlpang@redhat.com>
As default initrd is used for booting fadump capture kernel, it must be
rebuilt with dump capture capability when dump mode is fadump. Check if
default initrd is already fadump capable and rebuild, if necessary.
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Reviewed-by: Xunlei Pang <xlpang@redhat.com>
After adding "--hostonly-cmdline", besides 99kdump, 95iscsi
also generates iscsi related cmdline. IOW, we have duplicate
software iscsi cmdlines.
95iscsi generated software iscsi cmdline doesn't work, so we
remove that of 95iscsi and use that of 99kdump which has been
well tested.
We can change to use 95iscsi when possible in the future.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Now with the help of "--hostonly-cmdline", dracut will generate
the needed cmdlines for the dump target, so we can avoid the
corresponding duplicate or unnecessary inheritage.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Dracut has "--hostonly-cmdline" which can generate cmdlines(if any)
regarding the dump target, it's an existing way for us to use to
simplify the code. E.g. We already removed generate_lvm_cmdlines(),
to use "--hostonly-cmdline".
But "--hostonly-cmdline" has other issues(e.g. BZ1451717), it adds
needless devices for kdump like root device.
Now dracut supports "--no-hostonly-default-device" which enables
us to only add the kdump target, which can avoid needless devices
being recognized under kdump. Thus "--hostonly-cmdline" side effects
can be avoided with the help of "--no-hostonly-default-device".
This patch applies dracut's "--hostonly-cmdline" together with
"--no-hostonly-default-device" to achieve above-mentioned purpose.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Currently, we kept "root=X" for the dump_to_rootfs case, this
patch consolidates to use "--mount" for all the kdump mounts.
One advantage of this way is that dracut can correctly mark root
(in case of dump_to_rootfs is specified) as the host device when
"--no-hostonly-default-device" is added in the following patch.
Changed the code style in passing, as shellcheck tool reported:
Use $(..) instead of deprecated `..`
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Make is_fadump_capable() a library function, as we will need
it in mkdumprd.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
This reverts commit cb38b32dfc.
We are going to add "--hostonly-cmdline" dracut argument in
the following patch.
With the help of "--hostonly-cmdline", dracut will generate
"rd.lvm.lv=X" for us, no need to implement here again.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
This reverts commit 54a5bcc4ee.
We are going to add "--no-hostonly-default-device" dracut argument
in the following patch.
With the help of "--no-hostonly-default-device", dracut only
adds the dump target as host devices, which naturally guarantees
only required dracut modules being selected.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
This reverts commit 821d1af080.
We are going to add "--no-hostonly-default-device" dracut argument
in the following patch.
With the help of "--no-hostonly-default-device", dracut only
adds the dump target as host devices, which naturally guarantees
only required dracut modules being selected.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
This reverts commit fb522e972c.
We are going to add "--no-hostonly-default-device" dracut argument
in the following patch.
With the help of "--no-hostonly-default-device", dracut only
adds the dump target as host devices, which naturally guarantees
only required dracut modules being selected.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Added patch from panand which was accepted by upstream but not merged in upstream yet.
kexec-tools-2.0.15-makedumpfile-fix-SECTION_MAP_MASK-for-kernel-bigger-than-4.13.patch
Currently kdump service is restarted even when any new file is added in cpu
subsystem. So, it can be restarted multiple times in the cases like loading
of acpi_cpufreq module or online/offline of any cpu.
However, we should see kdump service restart only once in case a new CPU
is added or removed. cpu crash notes buffer is created when a new CPU is
added. It's location does not change when a CPU is onlined/offlined or
acpi_cpufreq driver is loaded. Therefore, no need to restart kdump
service in such cases.
Thus, we need to introduce an extra filter for the kernel name of the
directory created by cpu_add which is KERNEL=="cpu[0-9]*". This will ensure
that kdump service is not restarted when any new file is added in /removed
from cpu subsystem.
Signed-off-by: Pratyush Anand <panand@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Currently, we throw the error message at the very beginning, as
a result on a pure-hardware(all-offload) iscsi machine with many
iscsi partitions, we suffered from too much noise as follows:
iscsiadm: No records found
Unable to find iscsi record for
/sys/devices/pci0000:00/0000:00:06.0/0000:07:00.0/0000:08:01.1/host0/session1
iscsiadm: No records found
Unable to find iscsi record for
/sys/devices/pci0000:00/0000:00:06.0/0000:07:00.0/0000:08:01.3/host1/session2
iscsiadm: No records found
Unable to find iscsi record for
/sys/devices/pci0000:00/0000:00:06.0/0000:07:00.0/0000:08:01.1/host0/session1
iscsiadm: No records found
Unable to find iscsi record for
/sys/devices/pci0000:00/0000:00:06.0/0000:07:00.0/0000:08:01.3/host1/session2
iscsiadm: No records found
Unable to find iscsi record for
/sys/devices/pci0000:00/0000:00:06.0/0000:07:00.0/0000:08:01.1/host0/session1
iscsiadm: No records found
Unable to find iscsi record for
/sys/devices/pci0000:00/0000:00:06.0/0000:07:00.0/0000:08:01.3/host1/session2
iscsiadm: No records found
Unable to find iscsi record for
/sys/devices/pci0000:00/0000:00:06.0/0000:07:00.0/0000:08:01.1/host0/session1
iscsiadm: No records found
Unable to find iscsi record for
/sys/devices/pci0000:00/0000:00:06.0/0000:07:00.0/0000:08:01.3/host1/session2
iscsiadm: No records found
Unable to find iscsi record for
/sys/devices/pci0000:00/0000:00:06.0/0000:07:00.0/0000:08:01.1/host0/session1
iscsiadm: No records found
Unable to find iscsi record for
/sys/devices/pci0000:00/0000:00:06.0/0000:07:00.0/0000:08:01.3/host1/session2
kexec: loaded kdump kernel
Starting kdump: [OK]
There's no need to know the very early error messages, we can
remove the error output which is actually normal for the pure
hardware iscsi.
As for unexpected errors, we kept the error outputs in the
succeeding kdump_iscsi_get_rec_val() calls by not appending
"2>/dev/null".
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Currently, systemd uses 90s as the default mount unit timeout
(see "man 5 systemd-system.conf " for "DefaultTimeoutStartSec"),
in some cases, although it works well in 1st kernel, it's not
enough under kdump and results in mount timeout, further results
in kdump dumping failure.
We've met several such issues, we decided to enlarge this default
value a little for kdump.
We know that dracut has a default initqueue timeout value of 180s
("rd.retry"), we finalized a little larger value 300s as kdump's
default timeout if there is no explicit "DefaultTimeoutStartSec=X,
specified by users.
"DefaultTimeoutStartSec=X" can be overridden by individual mount
option "x-systemd.device-timeout=X", users can specify their own
values as needed.
This patch achieves the purpose by creating a dedicated conf file
"/etc/systemd/system.conf.d/kdump.conf" which has the content of
"DefaultTimeoutStartSec=300s", this is based on the fact that all
the conf files will be parsed by systemd and the last parsed one
will be used if there are duplicate definitions.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1474706
Makedumpfile failed with below error messages, which is caused by kernel changes 65ade2f872b474fa8a04c2d397783350326634e6:
Buffer size for the cyclic mode: 95992
vtop4_x86_64: Can't get the symbol of init_level4_pgt.
readmem: Can't convert a virtual address(ffffffff8fe18284) to physical address.
readmem: type_addr: 0, addr:ffffffff8fe18284, size:390
check_release: Can't get the address of system_utsname.
Pull in Pratyush's fix in upstream makedumpfile (not merged yet but acked by
maintainer)
Signed-off-by: Dave Young <dyoung@redhat.com>
After the following systemd commit, "x-initrd.mount"
option became useless actually, we can safely remove
it now.
commit ce3f6d82b003f365f718f24e48f55b8a0372b924
Author: nmartensen <nis.martensen@web.de>
Date: Fri Jan 15 07:55:25 2016 +0100
fstab-generator: remove bogus condition
The sysroot mount is already taken care of by the
add_sysroot_mount function. With this condition
left in, we can we can get something like this:
initrd-root-fs.target.requires
`-- usr.mount -> /run/systemd/generator/usr.mount
in the main system (i.e., not in the initramfs). In
the initramfs, the previous condition already kicks in.
[snip]
"mount_in_initrd(me)" is true with "x-initrd.mount" option,
the behaviour of systemd fstab generator changed after the
above-mentioned patch, it always generates local mount units
required by local-fs.target regardless of "x-initrd.mount".
After failure, it enters dracut emergency, further triggers
kdump emergency service, thus there is no problem.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
We met a problem on AMD machines, when using "nr_cpus=4" for
kdump, and crash happens on cpus other than cpu0, kdump kernel
will fail to boot and eventually reset.
After some debugging, we found that it stuck at the kernel path
do_boot_cpu()-> ... ->wakeup_secondary_cpu_via_init():
apic_icr_write(APIC_INT_LEVELTRIG|APIC_INT_ASSERT|APIC_DM_INIT,
phys_apicid);
that is, it stuck at sending INIT from AP to BP and reset, which
is actually what "disable_cpu_apicid=X" tries to solve. Printing
the value of @phys_apicid showed that it was the value of "apicid"
other that of "initial apicid" showed by /proc/cpuinfo.
As described in x86 specification:
"In MP systems, the local APIC ID is also used as a processor ID by the
BIOS and the operating system. Some processors permit software to modify
the APIC ID. However, the ability of software to modify the APIC ID is
processor model specific. Because of this, operating system software
should avoid writing to the local APIC ID register. The value returned by
bits 31-24 of the EBX register (when the CPUID instruction is executed with a
source operand value of 1 in the EAX register) is always the Initial APIC ID
(determined by the platform initialization). This is true even if software
has changed the value in the Local APIC ID register."
From kernel commit 151e0c7de("x86, apic, kexec: Add disable_cpu_apicid
kernel parameter"), we can see in generic_processor_info(), it uses
a)read_apic_id() and b)@apicid to compare with @disabled_cpu_apicid.
a)@apicid which is actually @phys_apicid above-mentioned is from the
following calltrace(on the problematic AMD machine):
generic_processor_info+0x37/0x300
acpi_register_lapic+0x30/0x90
acpi_parse_lapic+0x40/0x50
acpi_table_parse_entries_array+0x171/0x1de
acpi_boot_init+0xed/0x50f
The value of @apicid(from acpi MADT) is equal to the value of "apicid"
showed by /proc/cpuinfo as proved by our debug printk.
b)read_apic_id() gets the value from LAPIC ID register which is "apicid"
as well.
While the value of "initial apicid" is from cpuid instruction.
One example of "apicid" and "initial apicid" of cpu0 from /proc/cpuinfo
on AMD machine:
apicid : 32
initial apicid : 0
Therefore, we should assign /proc/cpuifo "apicid" to "disable_cpu_apicid=X".
We've never met such issue before, because we usually tested "nr_cpus=1",
and mostly on Intel machines, and "apicid" and "initial apicid" have the
same value in most cases on Intel machines.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
