Commit Graph

83 Commits

Author SHA1 Message Date
Kairui Song
017903c3c4 Revert "kdump-lib.sh: Remove is_atomic"
Now we need this helper again, for `reset-crashkernel`

This reverts commit ff46cfb19e.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
2021-07-08 15:18:00 +08:00
Hari Bathini
fa9201b240 fadump: isolate fadump initramfs image within the default one
In case of fadump, the initramfs image has to be built to boot into
the production environment as well as to offload the active crash dump
to the specified dump target (for boot after crash). As the same image
would be used for both boot scenarios, it could not be built optimally
while accommodating both cases.

Use --include to include the initramfs image built for offloading
active crash dump to the specified dump target. Also, introduce a new
out-of-tree dracut module (99zz-fadumpinit) that installs a customized
init program while moving the default /init to /init.dracut. This
customized init program is leveraged to isolate fadump image within
the default initramfs image by kicking off default boot process
(exec /init.dracut) for regular boot scenario and activating fadump
initramfs image, if the system is booting after a crash.

If squash is available, ensure default initramfs image is also built
with squash module to reduce memory consumption in capture kernel.

Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-06-29 21:35:58 +08:00
Hari Bathini
39a642b66b kdump-lib.sh: fix a warning in prepare_kdump_bootinfo()
Fix the warning observed when KDUMP_KERNELVER is specified:

  kdumpctl[10926]: /lib/kdump/kdump-lib.sh: line 697: [: missing `]'

Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-06-04 02:53:10 +08:00
Pingfan Liu
45377836b0 kdump-lib.sh: fix the case if no enough total RAM for kdump in get_recommend_size()
For crashkernel=auto policy, if total RAM size is under a throttle,
there is no memory reserved for kdump.

Also correct a trivial bug by correcting the arch name.

Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-05-25 10:07:55 +08:00
Kairui Song
e9e6a2c745 kdumpctl: Add kdumpctl estimate
Add a rough esitimation support, currently, following memory usage are
checked by this sub command:

- System RAM
- Kdump Initramfs size
- Kdump Kernel image size
- Kdump Kernel module size
- Kdump userspace user and other runtime allocated memory (currently
  simply using a fixed value: 64M)
- LUKS encryption memory usage

The output of kdumpctl estimate looks like this:
  # kdumpctl estimate
  Reserved crashkernel:    256M
  Recommanded crashkernel: 160M

  Kernel image size:   47M
  Kernel modules size: 12M
  Initramfs size:      19M
  Runtime reservation: 64M
  Large modules:
      xfs: 1892352
      nouveau: 2318336

And if the kdump target is encrypted:
  # kdumpctl estimate
  Encrypted kdump target requires extra memory, assuming using the keyslot with minimun memory requirement

  Reserved crashkernel:    256M
  Recommanded crashkernel: 655M

  Kernel image size:   47M
  Kernel modules size: 12M
  Initramfs size:      19M
  Runtime reservation: 64M
  LUKS required size:  512M
  Large modules:
      xfs: 1892352
      nouveau: 2318336
  WARNING: Current crashkernel size is lower than recommanded size 655M.

The "Recommanded" value is calculated based on memory usages mentioned
above, and will be adjusted accodingly to be no less than the value provided
by kdump_get_arch_recommend_size.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
2021-05-19 15:27:43 +08:00
Kairui Song
1c70cf51c7 kdump-lib.sh: introduce a helper to get all crypt dev used by kdump
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
2021-05-19 15:27:19 +08:00
Kairui Song
3423bbc17f kdump-lib.sh: introduce a helper to get underlying crypt device
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
2021-05-19 15:26:58 +08:00
Coiby Xu
0c292f49c7 Add helper to get nmcli connection show cmd by ifname
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-05-13 17:13:08 +08:00
Coiby Xu
c69578ca43 Add helper to get nmcli connection apath by ifname
apath (a D-Bus active connection path) is used for nmcli connection operations, e.g.
  $ nmcli connection show $apath

Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-05-13 17:13:01 +08:00
Coiby Xu
10c309b5f7 Add helper to get value by field using "nmcli --get-values"
nmcli --get-values <field> connection show /org/freedesktop/NetworkManager/ActiveConnection/1
returns the following value for the corresponding field respectively,
  Field                                  Value
  IP4.DNS                                "10.19.42.41 | 10.11.5.19 | 10.5.30.160"
  802-3-ethernet.s390-subchannels        ""
  bond.options                           "mode=balance-rr"

Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-05-13 17:11:38 +08:00
Kelvin Fan
75bdcb7399 Write to /var/lib/kdump if $KDUMP_BOOTDIR not writable
The `/boot` directory on some operating systems might be read-only.
If we cannot write to `$KDUMP_BOOTDIR` when generating the kdump
initrd, attempt to place the generated initrd at `/var/lib/kdump`
instead.

Signed-off by: Kelvin Fan <kelvinfan001@gmail.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-04-19 16:11:17 +08:00
Pingfan Liu
596fa0a07f kdumpctl: enable secure boot on ppc64le LPARs
On ppc64le LPAR, secure-boot is a little different from bare metal,
Where
  host secure boot: /ibm,secure-boot/os-secureboot-enforcing DT property exists
while
  guest secure boot: /ibm,secure-boot >= 2

Make kexec-tools adapt to LPAR

Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-02-23 09:45:54 +08:00
fj1508ic@fujitsu.com
f39000f524 Remove trace_buf_size and trace_event from the kernel bootparameters of the kdump kernel
The kdump kernel uses resources for ftrace because trace_buf_size, which
specifies the ring buffer size for ftrace, and trace_event, which specifies
a valid trace event, are not removed, but the kdump kernel does not require
ftrace.

trace_buf_size is ignored if the specified size is 0, so specify 1.

Signed-off-by: Hisashi Nagaoka <fj1508ic@fujitsu.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-02-05 16:06:14 +08:00
Pingfan Liu
18131894b6 kdump-lib.sh: introduce functions to return recommened mem size
There is requirement to decide the recommended memory size for the current
system. And the algorithm is based on /proc/iomem, so it can align with the
algorithm used by reserve_crashkernel() in kernel.

Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-02-05 16:06:14 +08:00
Kairui Song
02202aa70f logger: source the logger file individually
Sourcing logger file in kdump-lib.sh will leak kdump helper to dracut,
because module-setup.sh will source kdump-lib.sh. This will make kdump's
function override dracut's ones, and lead to unexpected behaviours.

So include kdump-logger.sh individually and only source it where it really
needed. for module-setup.sh, simply use dracut's logger helper is good
enough so just source kdump-logger.sh in kdump only scripts.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
2021-01-20 14:13:44 +08:00
Kairui Song
9966b0a12e kdump-lib: Fix get_bind_mount_source to support btrfs and fstab
Currently get_bind_mount_source will not work on btrfs, that's because
this function relies on findmnt to detect bind mount.

For a bind mount, findmnt will return different value with "-v" option.

For example, we have /dev/sdc mounted on /mnt/source, and then bind
mount /mnt/source/sub/path to /mnt/bind:

$ findmnt /mnt/bind
  TARGET    SOURCE              FSTYPE OPTIONS
  /mnt/bind /dev/sdc[/sub/path] ext4   rw,relatime,seclabel

$ findmnt -v /mnt/bind
  TARGET    SOURCE   FSTYPE OPTIONS
  /mnt/bind /dev/sdc ext4   rw,relatime,seclabel

But findmnt also return similiar result for btrfs, on a fresh installed
Fedora 33:

$ findmnt /
  TARGET SOURCE           FSTYPE OPTIONS
  /      /dev/sdb7[/root] btrfs  rw,relatime,seclabel,ssd,space_cache,subvolid=256,subvol=/root

$ findmnt -v /
  TARGET SOURCE    FSTYPE OPTIONS
  /      /dev/sdb7 btrfs  rw,relatime,seclabel,ssd,space_cache,subvolid=256,subvol=/root

The [...] indicator will contain the subvol of btrfs as well. And if
it's bind mounted under btrfs, it will contain a mixup of btrfs subvol
and the actuall fsroot.

And also, if the bind mount source device is not mounted on /,
get_bind_mount_source will also not work.

So rewrite the get_bind_mount_source function, make it work in every
cases.

Tested with:
 - Silverblue's bind mount
 - Bind mount with source device mounted not under /
 - Btrfs
 - Bind mount and source device is Btrfs

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
2020-11-30 15:26:53 +08:00
Kairui Song
08d9846eba Make get_mount_info work with bind mount
Remove the --real when calling findmnt.

The option is only useful in capture kernel, to avoid
`findmnt` returning the pseudo 'rootfs' for non mounted path.

example, when /kdumproot/mnt/ is not mounted:
kdump:/# findmnt --target /kdumproot/mnt
TARGET SOURCE FSTYPE OPTIONS
/      rootfs rootfs rw,size=61368k,nr_inodes=15342

kdump:/# findmnt --target /kdumproot/mnt
<return 1 and empty output>

But this function will make findmnt also return empty value for bind
mount. So remove it and add an extra if statement for second kernel.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
2020-11-30 15:26:47 +08:00
Kairui Song
d551516f52 Set watchdog's pretimeout to zero in kdump kernel
Most watchdogs have a parameter pretimeout, if set to non-zero, it means
before the watchdog really reset the system, it will try to panic the
kernel first, so kdump could kick in, or, just print a panic stacktrace
and then kernel should reset it self.

If we are already in kdump kernel, this is not really helpful, only
increase kernel hanging chance. And it also make thing become complex
as some watchdog triggers the kernel panic in NMI context, which
could also hang the kernel in strange ways, and fail the watchdog it
self. So just disable this parameter.

Also for hpwdt, it have another parameter kdumptimeout, which is
just designed for first kernel. The default behaviour is the watchdog
will simply stop working if timeouted, trigger a panic, and leave the
kernel to kdump. Again, if we are already in kdump this is not helpful.
So also disable that.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
2020-11-30 15:25:36 +08:00
Kairui Song
4464bcf8f3 kdump-lib.sh: Use a more generic helper to detect omitted dracut module
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
2020-11-30 15:25:26 +08:00
Kairui Song
320bd209fe Add a helper for detecting watchdog drivers
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
2020-11-30 15:25:13 +08:00
Kairui Song
69bf81bc8b Move watchdog detect and install code to module-setup.sh
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
2020-11-12 14:03:40 +08:00
Lianbo Jiang
3b743ae6ae enable the logger for kdump
Since the logger was introduced into kdump, let's enable it for kdump
so that we can output kdump messages according the log level and save
these messages for debugging.

Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2020-10-27 17:33:54 +08:00
Pingfan Liu
21f5f95b06 kdump-lib.sh: detect secure boot on s390
On s390, if Secure-IPL is enabled, then "kexec -s -l" is required.
Otherwise kdump kernel can not be loaded.

Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2020-10-19 16:45:17 +08:00
Kairui Song
ff46cfb19e kdump-lib.sh: Remove is_atomic
Now all atomic special workaround is removed, we can remove the atomic
detection function.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2020-08-27 11:35:01 +08:00
Kairui Song
a37f36ad4d Refactor kernel image and initrd detection code
kernel installation is not always in a fixed location /boot, there are
multiple different style of kernel installation, and initramfs location
changes with kernel. The two files should be detected together and adapt
to different style.

To do so we use a list of known installation destinations, and a list
of possible kernel image and initrd names. Iterate the two list to
detect the installation location of the two files. If GRUB is in use,
the BOOT_IMAGE= cmdline from GRUB will also be considered. And also
prefers user specified config if given.

Previous atomic workaround is no longer needed as the new detection
method can cover that case.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2020-08-27 11:29:17 +08:00
Hari Bathini
5521a70cc7 ppc64/kdump: use kexec_file_load when secureboot is enabled
In secure boot mode, kexec_load syscall is disabled. So, if in secure
boot mode, load kdump kernel with kexec_file_load syscall instead.

Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
2020-07-20 15:21:54 +08:00
Lianbo Jiang
073646998f Revert "kdump-lib: switch to the kexec_file_load() syscall on x86_64 by default"
This reverts commit 6a20bd5447.

Let's restore the logic of secureboot status check, and remove the
option 'KDUMP_FILE_LOAD=on|off'. We will use the option KEXEC_ARGS="-s"
to enable the kexec file load later, which can avoid failures when
the secureboot is enabled.

Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2020-07-01 17:07:46 +08:00
Kairui Song
a29de38da5 Always wrap up call to dracut get_persistent_dev function
Dracut get_persistent_dev function don't recognize UUID= or LABEL=
format, so caller should conver it to the path to the block device
before calling it. There is already such a helper
"kdump_get_persistent_dev", just move it to kdump-lib.sh and rename
it to reuse it,

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2020-06-22 19:58:08 +08:00
Kairui Song
ca01cbdfd5 mkdumprd: generate usable kdump initramfs even target is not mounted
Currently kexec-tools always depend on dump target to be mounted, which
caused some inconvenience for setup.

So for user configured target, allow kdump to start and build initramfs
even if target is not mounted.

When a mounted user configured target is used, the behavior is not
changed.

When a unmounted user configured target is used, mkdumprd will look for
corresponding mount info in fstab, and a entry with noauto option is
founded, mkdumprd will try to mount it inplace with optoins specified
in fstab and do basic checks on the device, then umount it.

If there is no fstab entry, mkdumprd will try to mount it in temporary
path with defaults option, do same basic check and umount it.

If there is a fstab entry but "noauto" option is not used, then there
must be some reason that the target device is not mounted, mkdumprd will
error out.

When path based target is used, there is no behavior change.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
2020-05-22 16:14:07 +08:00
Kairui Song
61e016939c User get_mount_info to replace findmnt calls
Use get_mount_info so that fstab is used as a failback when look for
mount info.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
2020-05-22 16:14:02 +08:00
Kairui Song
be578f6382 kdump-lib.sh: add fstab failback helper for getting mount info
This allows look up mount info even if target is not mounted.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
2020-05-22 16:13:57 +08:00
Kairui Song
0624148414 Add a is_mounted helper
Use is_mounted helper instaed of calling findmnt directly or checking if
"mount" value is empty.

If findmnt looks for fstab as well, some non mounted entry will also
return value. Required to support non-mounted target.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
2020-05-22 16:13:24 +08:00
Kairui Song
43ea36b3e8 Introduce get_kdump_mntpoint_from_target and fix duplicated /
User a helper to get the path to mount dump target in kdump kernel, and
fix duplicated '/' in the mount path problem.

Fixes: bz1785371
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2020-05-22 16:13:02 +08:00
Kairui Song
bde4b7af3b No longer treat atomic/silverblue specially
This commit remove almost all special workaround for atomic, and treat
all bind mounts in any environment equally.

Use a helper get_bind_mount_directory_from_path to get the bind mount
source path of given path.

is_atomic function now only used to determine the right /boot path
for atomic/silverblue environment.

And remove get_mntpoint_from_path(), it's the only function that never
ignore bind mount, and it have no caller after this clean up.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
2020-03-30 22:06:37 +08:00
Kairui Song
b5b0b90521 mkdumprd: Simplify handling of user specified target
For user specified target, the config value is used as the dump target,
and SAVE_PATH (path in kdump.conf) value is used as the dump path within
the dump target, no need to do anything extra with the path value.

Current code logic is not only complicated, it also wrongly generate
an redundantly long path in atomic/silverblue environment.

The right way is only check two things, and do nothing else:

 1. The path exists within the target;
 2. The target is large enough to hold to contain the vmcore.

Currently checking the target still requires it to be mounted so it will
error out if it's not mounted. Will implement some auto mount as next
step.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
2020-03-30 22:06:28 +08:00
Kairui Song
fd7e7be483 mkdumprd: Use get_save_path instead of parsing config
get_save_path provides default value fail back and error check, no need
to repeat it again.

Also remove a redundant echo and grep in get_save_path

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
2020-03-30 22:06:07 +08:00
HAGIO KAZUHITO(萩尾 一仁)
64d30f54b9 kdump-lib.sh: Fix is_user_configured_dump_target()
Currently, is_user_configured_dump_target() doesn't work as expected
due to lack of grep -E option.

As a result, kdump service with a ssh dump configuration can unnecessarily
fail to start due to the non-existence of a directory at where the path
option specifies on the local system:

  kdumpctl[9760]: Rebuilding /boot/initramfs-5.4.19-200.fc31.x86_64kdump.img
  kdumpctl[9760]: Dump path /var/crash/ssh does not exist.
  kdumpctl[9760]: mkdumprd: failed to make kdump initrd
  kdumpctl[9760]: Starting kdump: [FAILED]

Signed-off-by: Kazuhito Hagio <k-hagio-ab@nec.com>
Acked-by: Kairui Song <kasong@redhat.com>
2020-03-12 23:32:25 +08:00
Lianbo Jiang
6a20bd5447 kdump-lib: switch to the kexec_file_load() syscall on x86_64 by default
UEFI Secure boot is a signature verification mechanism, designed to
prevent malicious code being loaded and executed at the early boot
stage. This makes sure that code executed is trusted by firmware.

Previously, with kexec_file_load() interface, kernel prevents unsigned
kernel image from being loaded if secure boot is enabled. So kdump will
detect whether secure boot is enabled firstly, then decide which interface
is chosen to execute, kexec_load() or kexec_file_load(). Otherwise unsigned
kernel loading will fail if secure boot enabled, and kexec_file_load() is
entered.

Now, the implementation of kexec_file_load() is adjusted in below commit.
With this change, if CONFIG_KEXEC_SIG_FORCE is not set, unsigned kernel
still has a chance to be allowed to load under some conditions.

commit 99d5cadfde2b ("kexec_file: split KEXEC_VERIFY_SIG into KEXEC_SIG
and KEXEC_SIG_FORCE")

And in the current Fedora, the CONFIG_KEXEC_SIG_FORCE is not set, only the
CONFIG_KEXEC_SIG and CONFIG_BZIMAGE_VERIFY_SIG are set on x86_64 by default.
It's time to spread kexec_file_load() onto all systems of x86_64, including
Secure-boot platforms and legacy platforms. Please refer to the following
form.

.----------------------------------------------------------------------.
| .                    |     signed kernel     |    unsigned kernel    |
|    .      types      |-----------------------|-----------------------|
|       .              |Secure boot|  Legacy   |Secure boot|  Legacy   |
|          .           |-----------|-----------|-----------|-----------|
| options     .        | prev| now | prev| now |     |     | prev| now |
|                .     |(file|(file|(only|(file| prev| now |(only|(file|
|                    . |load)|load)|load)|load)|     |     |load)|load)|
|----------------------|-----|-----|-----|-----|-----|-----|-----|-----|
|KEXEC_SIG=y           |     |     |     |     |     |     |     |     |
|SIG_FORCE is not set  |succ |succ |succ |succ |  X  |  X  |succ |succ |
|BZIMAGE_VERIFY_SIG=y  |     |     |     |     |     |     |     |     |
|----------------------|-----|-----|-----|-----|-----|-----|-----|-----|
|KEXEC_SIG=y           |     |     |     |     |     |     |     |     |
|SIG_FORCE is not set  |     |     |     |     |     |     |     |     |
|BZIMAGE_VERIFY_SIG is |fail |fail |succ |fail |  X  |  X  |succ |fail |
|not set               |     |     |     |     |     |     |     |     |
|----------------------|-----|-----|-----|-----|-----|-----|-----|-----|
|KEXEC_SIG=y           |     |     |     |     |     |     |     |     |
|SIG_FORCE=y           |succ |succ |succ |fail |  X  |  X  |succ |fail |
|BZIMAGE_VERIFY_SIG=y  |     |     |     |     |     |     |     |     |
|----------------------|-----|-----|-----|-----|-----|-----|-----|-----|
|KEXEC_SIG=y           |     |     |     |     |     |     |     |     |
|SIG_FORCE=y           |     |     |     |     |     |     |     |     |
|BZIMAGE_VERIFY_SIG is |fail |fail |succ |fail |  X  |  X  |succ |fail |
|not set               |     |     |     |     |     |     |     |     |
|----------------------|-----|-----|-----|-----|-----|-----|-----|-----|
|KEXEC_SIG is not set  |     |     |     |     |     |     |     |     |
|SIG_FORCE is not set  |     |     |     |     |     |     |     |     |
|BZIMAGE_VERIFY_SIG is |fail |fail |succ |succ |  X  |  X  |succ |succ |
|not set               |     |     |     |     |     |     |     |     |
 ----------------------------------------------------------------------
Note:
[1] The 'X' indicates that the 1st kernel(unsigned) can not boot when the
    Secure boot is enabled.

Hence, in this patch, if on x86_64, let's use the kexec_file_load() only.
See if anything wrong happened in this case, in Fedora firstly for the
time being.

Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2020-02-06 21:57:14 +08:00
Kairui Song
b76c567325 kdump-lib.sh: Fix is_nfs_dump_target
Previously is_nfs_dump_target didn't cover the case that 'path <value>'
where <value> points to a nfs mount point. This function is never used
in first kernel before so so far it worked.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
2020-01-03 16:35:12 +08:00
Kairui Song
03111c797b Always use get_save_path to get the 'path' option
This help deduplicate the code. Use a single function instead of
repeat the same logic.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
2020-01-03 16:35:07 +08:00
Kairui Song
d10f202996 kdump-lib: Don't abuse echo, and clean up
Some of echo $(...) code segment is pointless, just call the command
directly, and remove some useless if / return statement.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
2020-01-03 16:34:34 +08:00
Yuval Turgeman
4714c7c8a3 kdump-lib: strip grub device from kdump_bootdir
When trying to setup kdump for fedora-coreos, kdumpctl start fails to
find the correct boot directory since BOOT_IMAGE start with the grub
device name

Signed-off-by: Yuval Turgeman <yturgema@redhat.com>
2019-09-24 12:19:43 +03:00
Kairui Song
75d9132417 Get rid of duplicated strip_comments when reading config
When reading kdump configs, a single parsing should be enough and this
saves a lot of duplicated striping call which speed up the total load
speed.

Speed up about 2 second when building and 0.1 second for reload in my
tests.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2019-05-20 16:56:28 +08:00
Kazuhito Hagio
cc95f0a744 Add failure_action as alias of default and make default obsolete
In preparation for adding 'final_action' option, since it's confusing
to have the 'final_action' and 'default' options at the same time,
this patch introduces 'failure_action' as an alias of the 'default'
option to /etc/kdump.conf, and makes 'default' obsolete to be removed
in the future.

Also, the "default action" term is renamed to "failure action".

Signed-off-by: Kazuhito Hagio <k-hagio@ab.jp.nec.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Lianbo Jiang <lijiang@redhat.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Acked-by: Bhupesh Sharma <bhsharma@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
2019-01-22 17:57:53 +08:00
Lianbo Jiang
b1fbeebd08 move some common functions from kdumpctl to kdump-lib.sh
we move some common functions from kdumpctl to kdump-lib.sh, the
functions could be used in other modules, such as early kdump.
It has no bad effect.

Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Reviewed-by: Kazuhito Hagio <khagio@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2018-05-29 10:18:40 +08:00
Dave Young
2884fed616 Revert "dracut-module-setup.sh: pass correct ip= param for ipv6"
This reverts commit 2f4149f276.

It is not proved to be right to get auto6 or dhcpv6 in 1st kernel,
pingfan is working on a dracut fix to do some fallback in 2nd kernel initramfs.
So revert this commit
2018-05-09 14:21:51 +08:00
Pingfan Liu
2f4149f276 dracut-module-setup.sh: pass correct ip= param for ipv6
Kdump always use _proto=dhcp for both ipv4 and ipv6.  But for ipv6
the dhcp address assignment is not like ipv4, there are different ways
for it, stateless and stateful, see below document:
https://fedoraproject.org/wiki/IPv6Guide

In case stateless, kernel can do the address assignment, dracut use
_proto=auto6;  for stateful case, dracut use _proto=dhcp6.

We do not see bug reports before because for the most auto6 cases
kernel assign ip address before dhclient, kdump just happened to work.

Here we use auto6 if possible first. And we take the assumption that
host use auto6 if /proc/sys/net/ipv6/conf/$netdev/autoconf is enabled

Signed-off-by: Pingfan Liu <piliu@redhat.com>
2018-03-15 10:06:51 +08:00
Xunlei Pang
e067d77dfc mkdumprd: apply dracut "--hostonly-cmdline" and "--no-hostonly-default-device"
Dracut has "--hostonly-cmdline" which can generate cmdlines(if any)
regarding the dump target, it's an existing way for us to use to
simplify the code. E.g. We already removed generate_lvm_cmdlines(),
to use "--hostonly-cmdline".

But "--hostonly-cmdline" has other issues(e.g. BZ1451717), it adds
needless devices for kdump like root device.

Now dracut supports "--no-hostonly-default-device" which enables
us to only add the kdump target, which can avoid needless devices
being recognized under kdump. Thus "--hostonly-cmdline" side effects
can be avoided with the help of "--no-hostonly-default-device".

This patch applies dracut's "--hostonly-cmdline" together with
"--no-hostonly-default-device" to achieve above-mentioned purpose.

Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2017-09-06 15:40:04 +08:00
Xunlei Pang
d5fe9022d0 kdumpctl: move is_fadump_capable() to kdump-lib.sh
Make is_fadump_capable() a library function, as we will need
it in mkdumprd.

Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2017-09-06 15:39:23 +08:00
Xunlei Pang
8250f23c10 Revert "mkdumprd: omit crypt when there is no crypt kdump target"
This reverts commit 54a5bcc4ee.

We are going to add "--no-hostonly-default-device" dracut argument
in the following patch.

With the help of "--no-hostonly-default-device", dracut only
adds the dump target as host devices, which naturally guarantees
only required dracut modules being selected.

Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2017-09-06 15:38:09 +08:00