diff --git a/kdump-lib.sh b/kdump-lib.sh
index 228d5b9..09e2058 100755
--- a/kdump-lib.sh
+++ b/kdump-lib.sh
@@ -11,137 +11,141 @@ FADUMP_ENABLED_SYS_NODE="/sys/kernel/fadump_enabled"
 
 is_fadump_capable()
 {
-    # Check if firmware-assisted dump is enabled
-    # if no, fallback to kdump check
-    if [[ -f $FADUMP_ENABLED_SYS_NODE ]]; then
-        rc=$(<$FADUMP_ENABLED_SYS_NODE)
-        [[ $rc -eq 1 ]] && return 0
-    fi
-    return 1
+	# Check if firmware-assisted dump is enabled
+	# if no, fallback to kdump check
+	if [[ -f $FADUMP_ENABLED_SYS_NODE ]]; then
+		rc=$(< $FADUMP_ENABLED_SYS_NODE)
+		[[ $rc -eq 1 ]] && return 0
+	fi
+	return 1
 }
 
-is_squash_available() {
-    for kmodule in squashfs overlay loop; do
-        if [[ -z "$KDUMP_KERNELVER" ]]; then
-            modprobe --dry-run $kmodule &>/dev/null || return 1
-        else
-            modprobe -S "$KDUMP_KERNELVER" --dry-run $kmodule &>/dev/null || return 1
-        fi
-    done
+is_squash_available()
+{
+	for kmodule in squashfs overlay loop; do
+		if [[ -z $KDUMP_KERNELVER ]]; then
+			modprobe --dry-run $kmodule &> /dev/null || return 1
+		else
+			modprobe -S "$KDUMP_KERNELVER" --dry-run $kmodule &> /dev/null || return 1
+		fi
+	done
 }
 
-perror_exit() {
-    derror "$@"
-    exit 1
+perror_exit()
+{
+	derror "$@"
+	exit 1
 }
 
 # Check if fence kdump is configured in Pacemaker cluster
 is_pcs_fence_kdump()
 {
-    # no pcs or fence_kdump_send executables installed?
-    type -P pcs > /dev/null || return 1
-    [[ -x $FENCE_KDUMP_SEND ]] || return 1
+	# no pcs or fence_kdump_send executables installed?
+	type -P pcs > /dev/null || return 1
+	[[ -x $FENCE_KDUMP_SEND ]] || return 1
 
-    # fence kdump not configured?
-    (pcs cluster cib | grep 'type="fence_kdump"') &> /dev/null || return 1
+	# fence kdump not configured?
+	(pcs cluster cib | grep 'type="fence_kdump"') &> /dev/null || return 1
 }
 
 # Check if fence_kdump is configured using kdump options
 is_generic_fence_kdump()
 {
-    [[ -x $FENCE_KDUMP_SEND ]] || return 1
+	[[ -x $FENCE_KDUMP_SEND ]] || return 1
 
-    [[ $(kdump_get_conf_val fence_kdump_nodes) ]]
+	[[ $(kdump_get_conf_val fence_kdump_nodes) ]]
 }
 
-to_dev_name() {
-    local dev="${1//\"/}"
+to_dev_name()
+{
+	local dev="${1//\"/}"
 
-    case "$dev" in
-    UUID=*)
-        blkid -U "${dev#UUID=}"
-        ;;
-    LABEL=*)
-        blkid -L "${dev#LABEL=}"
-        ;;
-    *)
-        echo "$dev"
-    esac
+	case "$dev" in
+	UUID=*)
+		blkid -U "${dev#UUID=}"
+		;;
+	LABEL=*)
+		blkid -L "${dev#LABEL=}"
+		;;
+	*)
+		echo "$dev"
+		;;
+	esac
 }
 
 is_user_configured_dump_target()
 {
-    [[ $(kdump_get_conf_val "ext[234]\|xfs\|btrfs\|minix\|raw\|nfs\|ssh") ]] || is_mount_in_dracut_args
+	[[ $(kdump_get_conf_val "ext[234]\|xfs\|btrfs\|minix\|raw\|nfs\|ssh") ]] || is_mount_in_dracut_args
 }
 
 get_user_configured_dump_disk()
 {
-    local _target
+	local _target
 
-    _target=$(kdump_get_conf_val "ext[234]\|xfs\|btrfs\|minix\|raw")
-    [[ -n "$_target" ]] && echo "$_target" && return
+	_target=$(kdump_get_conf_val "ext[234]\|xfs\|btrfs\|minix\|raw")
+	[[ -n $_target ]] && echo "$_target" && return
 
-    _target=$(get_dracut_args_target "$(kdump_get_conf_val "dracut_args")")
-    [[ -b "$_target" ]] && echo "$_target"
+	_target=$(get_dracut_args_target "$(kdump_get_conf_val "dracut_args")")
+	[[ -b $_target ]] && echo "$_target"
 }
 
 get_block_dump_target()
 {
-    local _target _path
+	local _target _path
 
-    if is_ssh_dump_target || is_nfs_dump_target; then
-        return
-    fi
+	if is_ssh_dump_target || is_nfs_dump_target; then
+		return
+	fi
 
-    _target=$(get_user_configured_dump_disk)
-    [[ -n "$_target" ]] && to_dev_name "$_target" && return
+	_target=$(get_user_configured_dump_disk)
+	[[ -n $_target ]] && to_dev_name "$_target" && return
 
-    # Get block device name from local save path
-    _path=$(get_save_path)
-    _target=$(get_target_from_path "$_path")
-    [[ -b "$_target" ]] && to_dev_name "$_target"
+	# Get block device name from local save path
+	_path=$(get_save_path)
+	_target=$(get_target_from_path "$_path")
+	[[ -b $_target ]] && to_dev_name "$_target"
 }
 
 is_dump_to_rootfs()
 {
-    [[ $(kdump_get_conf_val "failure_action|default") == dump_to_rootfs ]]
+	[[ $(kdump_get_conf_val "failure_action|default") == dump_to_rootfs ]]
 }
 
 get_failure_action_target()
 {
-    local _target
+	local _target
 
-    if is_dump_to_rootfs; then
-        # Get rootfs device name
-        _target=$(get_root_fs_device)
-        [[ -b "$_target" ]] && to_dev_name "$_target" && return
-        # Then, must be nfs root
-        echo "nfs"
-    fi
+	if is_dump_to_rootfs; then
+		# Get rootfs device name
+		_target=$(get_root_fs_device)
+		[[ -b $_target ]] && to_dev_name "$_target" && return
+		# Then, must be nfs root
+		echo "nfs"
+	fi
 }
 
 # Get kdump targets(including root in case of dump_to_rootfs).
 get_kdump_targets()
 {
-    local _target _root
-    local kdump_targets
+	local _target _root
+	local kdump_targets
 
-    _target=$(get_block_dump_target)
-    if [[ -n "$_target" ]]; then
-        kdump_targets=$_target
-    elif is_ssh_dump_target; then
-        kdump_targets="ssh"
-    else
-        kdump_targets="nfs"
-    fi
+	_target=$(get_block_dump_target)
+	if [[ -n $_target ]]; then
+		kdump_targets=$_target
+	elif is_ssh_dump_target; then
+		kdump_targets="ssh"
+	else
+		kdump_targets="nfs"
+	fi
 
-    # Add the root device if dump_to_rootfs is specified.
-    _root=$(get_failure_action_target)
-    if [[ -n "$_root" ]] && [[ "$kdump_targets" != "$_root" ]]; then
-        kdump_targets="$kdump_targets $_root"
-    fi
+	# Add the root device if dump_to_rootfs is specified.
+	_root=$(get_failure_action_target)
+	if [[ -n $_root ]] && [[ $kdump_targets != "$_root" ]]; then
+		kdump_targets="$kdump_targets $_root"
+	fi
 
-    echo "$kdump_targets"
+	echo "$kdump_targets"
 }
 
 # Return the bind mount source path, return the path itself if it's not bind mounted
@@ -158,128 +162,128 @@ get_kdump_targets()
 # part is the bind mounted directory which quotes by bracket "[]".
 get_bind_mount_source()
 {
-    local _mnt _path _src _opt _fstype
-    local _fsroot _src_nofsroot
+	local _mnt _path _src _opt _fstype
+	local _fsroot _src_nofsroot
 
-    _mnt=$(df "$1" | tail -1 | awk '{print $NF}')
-    _path=${1#$_mnt}
+	_mnt=$(df "$1" | tail -1 | awk '{print $NF}')
+	_path=${1#$_mnt}
 
-    _src=$(get_mount_info SOURCE target "$_mnt" -f)
-    _opt=$(get_mount_info OPTIONS target "$_mnt" -f)
-    _fstype=$(get_mount_info FSTYPE target "$_mnt" -f)
+	_src=$(get_mount_info SOURCE target "$_mnt" -f)
+	_opt=$(get_mount_info OPTIONS target "$_mnt" -f)
+	_fstype=$(get_mount_info FSTYPE target "$_mnt" -f)
 
-    # bind mount in fstab
-    if [[ -d "$_src" ]] && [[ "$_fstype" = none ]] && (echo "$_opt" | grep -q "\bbind\b"); then
-        echo "$_src$_path" && return
-    fi
+	# bind mount in fstab
+	if [[ -d $_src ]] && [[ $_fstype == none ]] && (echo "$_opt" | grep -q "\bbind\b"); then
+		echo "$_src$_path" && return
+	fi
 
-    # direct mount
-    _src_nofsroot=$(get_mount_info SOURCE target "$_mnt" -v -f)
-    if [[ $_src_nofsroot = "$_src" ]]; then
-        echo "$_mnt$_path" && return
-    fi
+	# direct mount
+	_src_nofsroot=$(get_mount_info SOURCE target "$_mnt" -v -f)
+	if [[ $_src_nofsroot == "$_src" ]]; then
+		echo "$_mnt$_path" && return
+	fi
 
-    _fsroot=${_src#${_src_nofsroot}[}
-    _fsroot=${_fsroot%]}
-    _mnt=$(get_mount_info TARGET source "$_src_nofsroot" -f)
+	_fsroot=${_src#${_src_nofsroot}[}
+	_fsroot=${_fsroot%]}
+	_mnt=$(get_mount_info TARGET source "$_src_nofsroot" -f)
 
-    # for btrfs, _fsroot will also contain the subvol value as well, strip it
-    if [[ "$_fstype" = btrfs ]]; then
-        local _subvol
-        _subvol=${_opt#*subvol=}
-        _subvol=${_subvol%,*}
-        _fsroot=${_fsroot#$_subvol}
-    fi
-    echo "$_mnt$_fsroot$_path"
+	# for btrfs, _fsroot will also contain the subvol value as well, strip it
+	if [[ $_fstype == btrfs ]]; then
+		local _subvol
+		_subvol=${_opt#*subvol=}
+		_subvol=${_subvol%,*}
+		_fsroot=${_fsroot#$_subvol}
+	fi
+	echo "$_mnt$_fsroot$_path"
 }
 
 get_mntopt_from_target()
 {
-    get_mount_info OPTIONS source "$1" -f
+	get_mount_info OPTIONS source "$1" -f
 }
 
 # Get the path where the target will be mounted in kdump kernel
 # $1: kdump target device
 get_kdump_mntpoint_from_target()
 {
-    local _mntpoint
+	local _mntpoint
 
-    _mntpoint=$(get_mntpoint_from_target "$1")
-    # mount under /sysroot if dump to root disk or mount under
-    # mount under /kdumproot if dump target is not mounted in first kernel
-    # mount under /kdumproot/$_mntpoint in other cases in 2nd kernel.
-    # systemd will be in charge to umount it.
-    if [[ -z "$_mntpoint" ]];then
-        _mntpoint="/kdumproot"
-    else
-        if [[ "$_mntpoint" = "/" ]];then
-            _mntpoint="/sysroot"
-        else
-            _mntpoint="/kdumproot/$_mntpoint"
-        fi
-    fi
+	_mntpoint=$(get_mntpoint_from_target "$1")
+	# mount under /sysroot if dump to root disk or mount under
+	# mount under /kdumproot if dump target is not mounted in first kernel
+	# mount under /kdumproot/$_mntpoint in other cases in 2nd kernel.
+	# systemd will be in charge to umount it.
+	if [[ -z $_mntpoint ]]; then
+		_mntpoint="/kdumproot"
+	else
+		if [[ $_mntpoint == "/" ]]; then
+			_mntpoint="/sysroot"
+		else
+			_mntpoint="/kdumproot/$_mntpoint"
+		fi
+	fi
 
-    # strip duplicated "/"
-    echo $_mntpoint | tr -s "/"
+	# strip duplicated "/"
+	echo $_mntpoint | tr -s "/"
 }
 
-kdump_get_persistent_dev() {
-    local dev="${1//\"/}"
+kdump_get_persistent_dev()
+{
+	local dev="${1//\"/}"
 
-    case "$dev" in
-    UUID=*)
-        dev=$(blkid -U "${dev#UUID=}")
-        ;;
-    LABEL=*)
-        dev=$(blkid -L "${dev#LABEL=}")
-        ;;
-    esac
-    echo $(get_persistent_dev "$dev")
+	case "$dev" in
+	UUID=*)
+		dev=$(blkid -U "${dev#UUID=}")
+		;;
+	LABEL=*)
+		dev=$(blkid -L "${dev#LABEL=}")
+		;;
+	esac
+	echo $(get_persistent_dev "$dev")
 }
 
 is_atomic()
 {
-    grep -q "ostree" /proc/cmdline
+	grep -q "ostree" /proc/cmdline
 }
 
 # get ip address or hostname from nfs/ssh config value
 get_remote_host()
 {
-    local _config_val=$1
+	local _config_val=$1
 
-    # ipv6 address in kdump.conf is around with "[]",
-    # factor out the ipv6 address
-    _config_val=${_config_val#*@}
-    _config_val=${_config_val%:/*}
-    _config_val=${_config_val#[}
-    _config_val=${_config_val%]}
-    echo "$_config_val"
+	# ipv6 address in kdump.conf is around with "[]",
+	# factor out the ipv6 address
+	_config_val=${_config_val#*@}
+	_config_val=${_config_val%:/*}
+	_config_val=${_config_val#[}
+	_config_val=${_config_val%]}
+	echo "$_config_val"
 }
 
 is_hostname()
 {
-    local _hostname
+	local _hostname
 
-    _hostname=$(echo "$1" | grep ":")
-    if [[ -n "$_hostname" ]]; then
-        return 1
-    fi
-    echo "$1" | grep -q "[a-zA-Z]"
+	_hostname=$(echo "$1" | grep ":")
+	if [[ -n $_hostname ]]; then
+		return 1
+	fi
+	echo "$1" | grep -q "[a-zA-Z]"
 }
 
 # Copied from "/etc/sysconfig/network-scripts/network-functions"
 get_hwaddr()
 {
-    if [[ -f "/sys/class/net/$1/address" ]]; then
-        awk '{ print toupper($0) }' < "/sys/class/net/$1/address"
-    elif [[ -d "/sys/class/net/$1" ]]; then
-       LC_ALL="" LANG="" ip -o link show "$1" 2>/dev/null | \
-            awk '{ print toupper(gensub(/.*link\/[^ ]* ([[:alnum:]:]*).*/,
+	if [[ -f "/sys/class/net/$1/address" ]]; then
+		awk '{ print toupper($0) }' < "/sys/class/net/$1/address"
+	elif [[ -d "/sys/class/net/$1" ]]; then
+		LC_ALL="" LANG="" ip -o link show "$1" 2> /dev/null |
+			awk '{ print toupper(gensub(/.*link\/[^ ]* ([[:alnum:]:]*).*/,
                                         "\\1", 1)); }'
-    fi
+	fi
 }
 
-
 # Get value by a field using "nmcli -g"
 # Usage: get_nmcli_value_by_field <field> <nmcli command>
 #
@@ -292,16 +296,16 @@ get_hwaddr()
 #   bond.options                           "mode=balance-rr"
 get_nmcli_value_by_field()
 {
-    LANG=C nmcli --get-values "$@"
+	LANG=C nmcli --get-values "$@"
 }
 
 # Get nmcli field value of an connection apath (a D-Bus active connection path)
 # Usage: get_nmcli_field_by_apath <field> <apath>
 get_nmcli_field_by_conpath()
 {
-    local _field=$1 _apath=$2
+	local _field=$1 _apath=$2
 
-    get_nmcli_value_by_field "$_field" connection show "$_apath"
+	get_nmcli_value_by_field "$_field" connection show "$_apath"
 }
 
 # Get nmcli connection apath (a D-Bus active connection path ) by ifname
@@ -310,129 +314,133 @@ get_nmcli_field_by_conpath()
 #  $ nmcli connection show $apath
 get_nmcli_connection_apath_by_ifname()
 {
-    local _ifname=$1
+	local _ifname=$1
 
-    get_nmcli_value_by_field "GENERAL.CON-PATH" device show "$_ifname"
+	get_nmcli_value_by_field "GENERAL.CON-PATH" device show "$_ifname"
 }
 
 get_ifcfg_by_device()
 {
-    grep -E -i -l "^[[:space:]]*DEVICE=\"*${1}\"*[[:space:]]*$" \
-         /etc/sysconfig/network-scripts/ifcfg-* 2>/dev/null | head -1
+	grep -E -i -l "^[[:space:]]*DEVICE=\"*${1}\"*[[:space:]]*$" \
+		/etc/sysconfig/network-scripts/ifcfg-* 2> /dev/null | head -1
 }
 
 get_ifcfg_by_hwaddr()
 {
-    grep -E -i -l "^[[:space:]]*HWADDR=\"*${1}\"*[[:space:]]*$" \
-         /etc/sysconfig/network-scripts/ifcfg-* 2>/dev/null | head -1
+	grep -E -i -l "^[[:space:]]*HWADDR=\"*${1}\"*[[:space:]]*$" \
+		/etc/sysconfig/network-scripts/ifcfg-* 2> /dev/null | head -1
 }
 
 get_ifcfg_by_uuid()
 {
-    grep -E -i -l "^[[:space:]]*UUID=\"*${1}\"*[[:space:]]*$" \
-         /etc/sysconfig/network-scripts/ifcfg-* 2>/dev/null | head -1
+	grep -E -i -l "^[[:space:]]*UUID=\"*${1}\"*[[:space:]]*$" \
+		/etc/sysconfig/network-scripts/ifcfg-* 2> /dev/null | head -1
 }
 
 get_ifcfg_by_name()
 {
-    grep -E -i -l "^[[:space:]]*NAME=\"*${1}\"*[[:space:]]*$" \
-         /etc/sysconfig/network-scripts/ifcfg-* 2>/dev/null | head -1
+	grep -E -i -l "^[[:space:]]*NAME=\"*${1}\"*[[:space:]]*$" \
+		/etc/sysconfig/network-scripts/ifcfg-* 2> /dev/null | head -1
 }
 
 is_nm_running()
 {
-    [[ "$(LANG=C nmcli -t --fields running general status 2>/dev/null)" = "running" ]]
+	[[ "$(LANG=C nmcli -t --fields running general status 2> /dev/null)" == "running" ]]
 }
 
 is_nm_handling()
 {
-    LANG=C nmcli -t --fields device,state  dev status 2>/dev/null \
-          | grep -q "^\(${1}:connected\)\|\(${1}:connecting.*\)$"
+	LANG=C nmcli -t --fields device,state dev status 2> /dev/null |
+		grep -q "^\(${1}:connected\)\|\(${1}:connecting.*\)$"
 }
 
 # $1: netdev name
 get_ifcfg_nmcli()
 {
-    local nm_uuid nm_name
-    local ifcfg_file
+	local nm_uuid nm_name
+	local ifcfg_file
 
-    # Get the active nmcli config name of $1
-    if is_nm_running && is_nm_handling "${1}" ; then
-        # The configuration "uuid" and "name" generated by nm is wrote to
-        # the ifcfg file as "UUID=<nm_uuid>" and "NAME=<nm_name>".
-        nm_uuid=$(LANG=C nmcli -t --fields uuid,device c show --active 2>/dev/null \
-                  | grep "${1}" | head -1 | cut -d':' -f1)
-        nm_name=$(LANG=C nmcli -t --fields name,device c show --active 2>/dev/null \
-                  | grep "${1}" | head -1 | cut -d':' -f1)
-        ifcfg_file=$(get_ifcfg_by_uuid "${nm_uuid}")
-        [[ -z "${ifcfg_file}" ]] && ifcfg_file=$(get_ifcfg_by_name "${nm_name}")
-    fi
+	# Get the active nmcli config name of $1
+	if is_nm_running && is_nm_handling "${1}"; then
+		# The configuration "uuid" and "name" generated by nm is wrote to
+		# the ifcfg file as "UUID=<nm_uuid>" and "NAME=<nm_name>".
+		nm_uuid=$(LANG=C nmcli -t --fields uuid,device c show --active 2> /dev/null |
+			grep "${1}" | head -1 | cut -d':' -f1)
+		nm_name=$(LANG=C nmcli -t --fields name,device c show --active 2> /dev/null |
+			grep "${1}" | head -1 | cut -d':' -f1)
+		ifcfg_file=$(get_ifcfg_by_uuid "${nm_uuid}")
+		[[ -z ${ifcfg_file} ]] && ifcfg_file=$(get_ifcfg_by_name "${nm_name}")
+	fi
 
-    echo -n "${ifcfg_file}"
+	echo -n "${ifcfg_file}"
 }
 
 # $1: netdev name
 get_ifcfg_legacy()
 {
-    local ifcfg_file hwaddr
+	local ifcfg_file hwaddr
 
-    ifcfg_file="/etc/sysconfig/network-scripts/ifcfg-${1}"
-    [[ -f "${ifcfg_file}" ]] && echo -n "${ifcfg_file}" && return
+	ifcfg_file="/etc/sysconfig/network-scripts/ifcfg-${1}"
+	[[ -f ${ifcfg_file} ]] && echo -n "${ifcfg_file}" && return
 
-    ifcfg_file=$(get_ifcfg_by_name "${1}")
-    [[ -f "${ifcfg_file}" ]] && echo -n "${ifcfg_file}" && return
+	ifcfg_file=$(get_ifcfg_by_name "${1}")
+	[[ -f ${ifcfg_file} ]] && echo -n "${ifcfg_file}" && return
 
-    hwaddr=$(get_hwaddr "${1}")
-    if [[ -n "$hwaddr" ]]; then
-        ifcfg_file=$(get_ifcfg_by_hwaddr "${hwaddr}")
-        [[ -f "${ifcfg_file}" ]] && echo -n "${ifcfg_file}" && return
-    fi
+	hwaddr=$(get_hwaddr "${1}")
+	if [[ -n $hwaddr ]]; then
+		ifcfg_file=$(get_ifcfg_by_hwaddr "${hwaddr}")
+		[[ -f ${ifcfg_file} ]] && echo -n "${ifcfg_file}" && return
+	fi
 
-    ifcfg_file=$(get_ifcfg_by_device "${1}")
+	ifcfg_file=$(get_ifcfg_by_device "${1}")
 
-    echo -n "${ifcfg_file}"
+	echo -n "${ifcfg_file}"
 }
 
 # $1: netdev name
 # Return the ifcfg file whole name(including the path) of $1 if any.
-get_ifcfg_filename() {
-    local ifcfg_file
+get_ifcfg_filename()
+{
+	local ifcfg_file
 
-    ifcfg_file=$(get_ifcfg_nmcli "${1}")
-    if [[ -z "${ifcfg_file}" ]]; then
-        ifcfg_file=$(get_ifcfg_legacy "${1}")
-    fi
+	ifcfg_file=$(get_ifcfg_nmcli "${1}")
+	if [[ -z ${ifcfg_file} ]]; then
+		ifcfg_file=$(get_ifcfg_legacy "${1}")
+	fi
 
-    echo -n "${ifcfg_file}"
+	echo -n "${ifcfg_file}"
 }
 
 # returns 0 when omission of a module is desired in dracut_args
 # returns 1 otherwise
-is_dracut_mod_omitted() {
-    local dracut_args dracut_mod=$1
+is_dracut_mod_omitted()
+{
+	local dracut_args dracut_mod=$1
 
-    set -- $(kdump_get_conf_val dracut_args)
-    while [ $# -gt 0 ]; do
-        case $1 in
-            -o|--omit)
-                [[ " ${2//[^[:alnum:]]/ } " ==  *" $dracut_mod "* ]] && return 0
-        esac
-        shift
-    done
+	set -- $(kdump_get_conf_val dracut_args)
+	while [ $# -gt 0 ]; do
+		case $1 in
+		-o | --omit)
+			[[ " ${2//[^[:alnum:]]/ } " == *" $dracut_mod "* ]] && return 0
+			;;
+		esac
+		shift
+	done
 
-    return 1
+	return 1
 }
 
-is_wdt_active() {
-    local active
+is_wdt_active()
+{
+	local active
 
-    [[ -d /sys/class/watchdog ]] || return 1
-    for dir in /sys/class/watchdog/*; do
-        [[ -f "$dir/state" ]] || continue
-        active=$(< "$dir/state")
-        [[ "$active" =  "active" ]] && return 0
-    done
-    return 1
+	[[ -d /sys/class/watchdog ]] || return 1
+	for dir in /sys/class/watchdog/*; do
+		[[ -f "$dir/state" ]] || continue
+		active=$(< "$dir/state")
+		[[ $active == "active" ]] && return 0
+	done
+	return 1
 }
 
 # If "dracut_args" contains "--mount" information, use it
@@ -440,45 +448,45 @@ is_wdt_active() {
 # its correctness).
 is_mount_in_dracut_args()
 {
-    [[ " $(kdump_get_conf_val dracut_args)" =~ .*[[:space:]]--mount[=[:space:]].* ]]
+	[[ " $(kdump_get_conf_val dracut_args)" =~ .*[[:space:]]--mount[=[:space:]].* ]]
 }
 
 check_crash_mem_reserved()
 {
-    local mem_reserved
+	local mem_reserved
 
-    mem_reserved=$(</sys/kernel/kexec_crash_size)
-    if [[ $mem_reserved -eq 0 ]]; then
-        derror "No memory reserved for crash kernel"
-        return 1
-    fi
+	mem_reserved=$(< /sys/kernel/kexec_crash_size)
+	if [[ $mem_reserved -eq 0 ]]; then
+		derror "No memory reserved for crash kernel"
+		return 1
+	fi
 
-    return 0
+	return 0
 }
 
 check_kdump_feasibility()
 {
-    if [[ ! -e /sys/kernel/kexec_crash_loaded ]]; then
-        derror "Kdump is not supported on this kernel"
-        return 1
-    fi
-    check_crash_mem_reserved
-    return $?
+	if [[ ! -e /sys/kernel/kexec_crash_loaded ]]; then
+		derror "Kdump is not supported on this kernel"
+		return 1
+	fi
+	check_crash_mem_reserved
+	return $?
 }
 
 check_current_kdump_status()
 {
-    if [[ ! -f /sys/kernel/kexec_crash_loaded ]];then
-        derror "Perhaps CONFIG_CRASH_DUMP is not enabled in kernel"
-        return 1
-    fi
+	if [[ ! -f /sys/kernel/kexec_crash_loaded ]]; then
+		derror "Perhaps CONFIG_CRASH_DUMP is not enabled in kernel"
+		return 1
+	fi
 
-    rc=$(</sys/kernel/kexec_crash_loaded)
-    if [[ $rc == 1 ]]; then
-        return 0
-    else
-        return 1
-    fi
+	rc=$(< /sys/kernel/kexec_crash_loaded)
+	if [[ $rc == 1 ]]; then
+		return 0
+	else
+		return 1
+	fi
 }
 
 # remove_cmdline_param <kernel cmdline> <param1> [<param2>] ... [<paramN>]
@@ -486,17 +494,17 @@ check_current_kdump_status()
 # For each "arg" in the removing params list, "arg" and "arg=xxx" will be removed if exists.
 remove_cmdline_param()
 {
-    local cmdline=$1
-    shift
+	local cmdline=$1
+	shift
 
-    for arg in "$@"; do
-        cmdline=$(echo "$cmdline" | \
-                 sed -e "s/\b$arg=[^ ]*//g" \
-                 -e "s/^$arg\b//g" \
-                 -e "s/[[:space:]]$arg\b//g" \
-                 -e "s/\s\+/ /g")
-    done
-    echo "$cmdline"
+	for arg in "$@"; do
+		cmdline=$(echo "$cmdline" |
+			sed -e "s/\b$arg=[^ ]*//g" \
+				-e "s/^$arg\b//g" \
+				-e "s/[[:space:]]$arg\b//g" \
+				-e "s/\s\+/ /g")
+	done
+	echo "$cmdline"
 }
 
 #
@@ -505,12 +513,12 @@ remove_cmdline_param()
 #
 get_bootcpu_apicid()
 {
-    awk '                                                       \
+	awk '                                                       \
         BEGIN { CPU = "-1"; }                                   \
         $1=="processor" && $2==":"      { CPU = $NF; }          \
         CPU=="0" && /^apicid/           { print $NF; }          \
-        '                                                       \
-        /proc/cpuinfo
+        ' \
+		/proc/cpuinfo
 }
 
 #
@@ -519,22 +527,22 @@ get_bootcpu_apicid()
 #
 append_cmdline()
 {
-    local cmdline=$1
-    local newstr=${cmdline/$2/""}
+	local cmdline=$1
+	local newstr=${cmdline/$2/""}
 
-    # unchanged str implies argument wasn't there
-    if [[ "$cmdline" == "$newstr" ]]; then
-        cmdline="${cmdline} ${2}=${3}"
-    fi
+	# unchanged str implies argument wasn't there
+	if [[ $cmdline == "$newstr" ]]; then
+		cmdline="${cmdline} ${2}=${3}"
+	fi
 
-    echo "$cmdline"
+	echo "$cmdline"
 }
 
 # This function check iomem and determines if we have more than
 # 4GB of ram available. Returns 1 if we do, 0 if we dont
 need_64bit_headers()
 {
-    return "$(tail -n 1 /proc/iomem | awk '{ split ($1, r, "-");
+	return "$(tail -n 1 /proc/iomem | awk '{ split ($1, r, "-");
         print (strtonum("0x" r[2]) > strtonum("0xffffffff")); }')"
 }
 
@@ -549,34 +557,34 @@ need_64bit_headers()
 # Assume efivars is mounted at /sys/firmware/efi/efivars.
 is_secure_boot_enforced()
 {
-    local secure_boot_file setup_mode_file
-    local secure_boot_byte setup_mode_byte
+	local secure_boot_file setup_mode_file
+	local secure_boot_byte setup_mode_byte
 
-    # On powerpc, os-secureboot-enforcing DT property indicates whether secureboot
-    # is enforced. Return success, if it is found.
-    if [[ -f /proc/device-tree/ibm,secureboot/os-secureboot-enforcing ]]; then
+	# On powerpc, os-secureboot-enforcing DT property indicates whether secureboot
+	# is enforced. Return success, if it is found.
+	if [[ -f /proc/device-tree/ibm,secureboot/os-secureboot-enforcing ]]; then
 		return 0
-    fi
+	fi
 
-    # Detect secure boot on x86 and arm64
-    secure_boot_file=$(find /sys/firmware/efi/efivars -name "SecureBoot-*" 2>/dev/null)
-    setup_mode_file=$(find /sys/firmware/efi/efivars -name "SetupMode-*" 2>/dev/null)
+	# Detect secure boot on x86 and arm64
+	secure_boot_file=$(find /sys/firmware/efi/efivars -name "SecureBoot-*" 2> /dev/null)
+	setup_mode_file=$(find /sys/firmware/efi/efivars -name "SetupMode-*" 2> /dev/null)
 
-    if [[ -f "$secure_boot_file" ]] && [[ -f "$setup_mode_file" ]]; then
-        secure_boot_byte=$(hexdump -v -e '/1 "%d\ "' "$secure_boot_file" | cut -d' ' -f 5)
-        setup_mode_byte=$(hexdump -v -e '/1 "%d\ "' "$setup_mode_file" | cut -d' ' -f 5)
+	if [[ -f $secure_boot_file ]] && [[ -f $setup_mode_file ]]; then
+		secure_boot_byte=$(hexdump -v -e '/1 "%d\ "' "$secure_boot_file" | cut -d' ' -f 5)
+		setup_mode_byte=$(hexdump -v -e '/1 "%d\ "' "$setup_mode_file" | cut -d' ' -f 5)
 
-        if [[ "$secure_boot_byte" = "1" ]] && [[ "$setup_mode_byte" = "0" ]]; then
-            return 0
-        fi
-    fi
+		if [[ $secure_boot_byte == "1" ]] && [[ $setup_mode_byte == "0" ]]; then
+			return 0
+		fi
+	fi
 
-    # Detect secure boot on s390x
-    if [[ -e "/sys/firmware/ipl/secure" && "$(</sys/firmware/ipl/secure)" == "1" ]]; then
-        return 0
-    fi
+	# Detect secure boot on s390x
+	if [[ -e "/sys/firmware/ipl/secure" && "$(< /sys/firmware/ipl/secure)" == "1" ]]; then
+		return 0
+	fi
 
-    return 1
+	return 1
 }
 
 #
@@ -585,31 +593,27 @@ is_secure_boot_enforced()
 #
 prepare_kexec_args()
 {
-    local kexec_args=$1
-    local found_elf_args
+	local kexec_args=$1
+	local found_elf_args
 
-    ARCH=$(uname -m)
-    if [[ "$ARCH" == "i686" ]] || [[ "$ARCH" == "i386" ]]
-    then
-        need_64bit_headers
-        if [[ $? == 1 ]]
-        then
-            found_elf_args=$(echo "$kexec_args" | grep elf32-core-headers)
-            if [[ -n "$found_elf_args" ]]
-            then
-                dwarn "Warning: elf32-core-headers overrides correct elf64 setting"
-            else
-                kexec_args="$kexec_args --elf64-core-headers"
-            fi
-        else
-            found_elf_args=$(echo "$kexec_args" | grep elf64-core-headers)
-            if [[ -z "$found_elf_args" ]]
-            then
-                kexec_args="$kexec_args --elf32-core-headers"
-            fi
-        fi
-    fi
-    echo "$kexec_args"
+	ARCH=$(uname -m)
+	if [[ $ARCH == "i686" ]] || [[ $ARCH == "i386" ]]; then
+		need_64bit_headers
+		if [[ $? == 1 ]]; then
+			found_elf_args=$(echo "$kexec_args" | grep elf32-core-headers)
+			if [[ -n $found_elf_args ]]; then
+				dwarn "Warning: elf32-core-headers overrides correct elf64 setting"
+			else
+				kexec_args="$kexec_args --elf64-core-headers"
+			fi
+		else
+			found_elf_args=$(echo "$kexec_args" | grep elf64-core-headers)
+			if [[ -z $found_elf_args ]]; then
+				kexec_args="$kexec_args --elf32-core-headers"
+			fi
+		fi
+	fi
+	echo "$kexec_args"
 }
 
 #
@@ -621,88 +625,88 @@ prepare_kexec_args()
 #
 prepare_kdump_bootinfo()
 {
-    local boot_img boot_imglist boot_dirlist boot_initrdlist
-    local machine_id
+	local boot_img boot_imglist boot_dirlist boot_initrdlist
+	local machine_id
 
-    if [[ -z "$KDUMP_KERNELVER" ]]; then
-        KDUMP_KERNELVER="$(uname -r)"
-    fi
+	if [[ -z $KDUMP_KERNELVER ]]; then
+		KDUMP_KERNELVER="$(uname -r)"
+	fi
 
-    read -r machine_id < /etc/machine-id
-    boot_dirlist=${KDUMP_BOOTDIR:-"/boot /boot/efi /efi /"}
-    boot_imglist="$KDUMP_IMG-$KDUMP_KERNELVER$KDUMP_IMG_EXT $machine_id/$KDUMP_KERNELVER/$KDUMP_IMG"
+	read -r machine_id < /etc/machine-id
+	boot_dirlist=${KDUMP_BOOTDIR:-"/boot /boot/efi /efi /"}
+	boot_imglist="$KDUMP_IMG-$KDUMP_KERNELVER$KDUMP_IMG_EXT $machine_id/$KDUMP_KERNELVER/$KDUMP_IMG"
 
-    # Use BOOT_IMAGE as reference if possible, strip the GRUB root device prefix in (hd0,gpt1) format
-    boot_img="$(sed "s/^BOOT_IMAGE=\((\S*)\)\?\(\S*\) .*/\2/" /proc/cmdline)"
-    if [[ -n "$boot_img" ]]; then
-        boot_imglist="$boot_img $boot_imglist"
-    fi
+	# Use BOOT_IMAGE as reference if possible, strip the GRUB root device prefix in (hd0,gpt1) format
+	boot_img="$(sed "s/^BOOT_IMAGE=\((\S*)\)\?\(\S*\) .*/\2/" /proc/cmdline)"
+	if [[ -n $boot_img ]]; then
+		boot_imglist="$boot_img $boot_imglist"
+	fi
 
-    for dir in $boot_dirlist; do
-        for img in $boot_imglist; do
-            if [[ -f "$dir/$img" ]]; then
-                KDUMP_KERNEL=$(echo "$dir/$img" | tr -s '/')
-                break 2
-            fi
-        done
-    done
+	for dir in $boot_dirlist; do
+		for img in $boot_imglist; do
+			if [[ -f "$dir/$img" ]]; then
+				KDUMP_KERNEL=$(echo "$dir/$img" | tr -s '/')
+				break 2
+			fi
+		done
+	done
 
-    if ! [[ -e "$KDUMP_KERNEL" ]]; then
-        derror "Failed to detect kdump kernel location"
-        return 1
-    fi
+	if ! [[ -e $KDUMP_KERNEL ]]; then
+		derror "Failed to detect kdump kernel location"
+		return 1
+	fi
 
-    # Set KDUMP_BOOTDIR to where kernel image is stored
-    KDUMP_BOOTDIR=$(dirname "$KDUMP_KERNEL")
+	# Set KDUMP_BOOTDIR to where kernel image is stored
+	KDUMP_BOOTDIR=$(dirname "$KDUMP_KERNEL")
 
-    # Default initrd should just stay aside of kernel image, try to find it in KDUMP_BOOTDIR
-    boot_initrdlist="initramfs-$KDUMP_KERNELVER.img initrd"
-    for initrd in $boot_initrdlist; do
-        if [[ -f "$KDUMP_BOOTDIR/$initrd" ]]; then
-            defaut_initrd_base="$initrd"
-            DEFAULT_INITRD="$KDUMP_BOOTDIR/$defaut_initrd_base"
-            break
-        fi
-    done
+	# Default initrd should just stay aside of kernel image, try to find it in KDUMP_BOOTDIR
+	boot_initrdlist="initramfs-$KDUMP_KERNELVER.img initrd"
+	for initrd in $boot_initrdlist; do
+		if [[ -f "$KDUMP_BOOTDIR/$initrd" ]]; then
+			defaut_initrd_base="$initrd"
+			DEFAULT_INITRD="$KDUMP_BOOTDIR/$defaut_initrd_base"
+			break
+		fi
+	done
 
-    # Create kdump initrd basename from default initrd basename
-    # initramfs-5.7.9-200.fc32.x86_64.img => initramfs-5.7.9-200.fc32.x86_64kdump.img
-    # initrd => initrdkdump
-    if [[ -z "$defaut_initrd_base" ]]; then
-        kdump_initrd_base=initramfs-${KDUMP_KERNELVER}kdump.img
-    elif [[ $defaut_initrd_base == *.* ]]; then
-        kdump_initrd_base=${defaut_initrd_base%.*}kdump.${DEFAULT_INITRD##*.}
-    else
-        kdump_initrd_base=${defaut_initrd_base}kdump
-    fi
+	# Create kdump initrd basename from default initrd basename
+	# initramfs-5.7.9-200.fc32.x86_64.img => initramfs-5.7.9-200.fc32.x86_64kdump.img
+	# initrd => initrdkdump
+	if [[ -z $defaut_initrd_base ]]; then
+		kdump_initrd_base=initramfs-${KDUMP_KERNELVER}kdump.img
+	elif [[ $defaut_initrd_base == *.* ]]; then
+		kdump_initrd_base=${defaut_initrd_base%.*}kdump.${DEFAULT_INITRD##*.}
+	else
+		kdump_initrd_base=${defaut_initrd_base}kdump
+	fi
 
-    # Place kdump initrd in $(/var/lib/kdump) if $(KDUMP_BOOTDIR) not writable
-    if [[ ! -w "$KDUMP_BOOTDIR" ]];then
-        var_target_initrd_dir="/var/lib/kdump"
-        mkdir -p "$var_target_initrd_dir"
-        KDUMP_INITRD="$var_target_initrd_dir/$kdump_initrd_base"
-    else
-        KDUMP_INITRD="$KDUMP_BOOTDIR/$kdump_initrd_base"
-    fi
+	# Place kdump initrd in $(/var/lib/kdump) if $(KDUMP_BOOTDIR) not writable
+	if [[ ! -w $KDUMP_BOOTDIR ]]; then
+		var_target_initrd_dir="/var/lib/kdump"
+		mkdir -p "$var_target_initrd_dir"
+		KDUMP_INITRD="$var_target_initrd_dir/$kdump_initrd_base"
+	else
+		KDUMP_INITRD="$KDUMP_BOOTDIR/$kdump_initrd_base"
+	fi
 }
 
 get_watchdog_drvs()
 {
-    local _wdtdrvs _drv _dir
+	local _wdtdrvs _drv _dir
 
-    for _dir in /sys/class/watchdog/*; do
-        # device/modalias will return driver of this device
-        [[ -f "$_dir/device/modalias" ]] || continue
-        _drv=$(< "$_dir/device/modalias")
-        _drv=$(modprobe --set-version "$KDUMP_KERNELVER" -R "$_drv" 2>/dev/null)
-        for i in $_drv; do
-            if ! [[ " $_wdtdrvs " == *" $i "* ]]; then
-                _wdtdrvs="$_wdtdrvs $i"
-            fi
-        done
-    done
+	for _dir in /sys/class/watchdog/*; do
+		# device/modalias will return driver of this device
+		[[ -f "$_dir/device/modalias" ]] || continue
+		_drv=$(< "$_dir/device/modalias")
+		_drv=$(modprobe --set-version "$KDUMP_KERNELVER" -R "$_drv" 2> /dev/null)
+		for i in $_drv; do
+			if ! [[ " $_wdtdrvs " == *" $i "* ]]; then
+				_wdtdrvs="$_wdtdrvs $i"
+			fi
+		done
+	done
 
-    echo "$_wdtdrvs"
+	echo "$_wdtdrvs"
 }
 
 #
@@ -711,143 +715,143 @@ get_watchdog_drvs()
 # Store the final result in global $KDUMP_COMMANDLINE.
 prepare_cmdline()
 {
-    local cmdline id arg
+	local cmdline id arg
 
-    if [[ -z "$1" ]]; then
-        cmdline=$(</proc/cmdline)
-    else
-        cmdline="$1"
-    fi
+	if [[ -z $1 ]]; then
+		cmdline=$(< /proc/cmdline)
+	else
+		cmdline="$1"
+	fi
 
-    # These params should always be removed
-    cmdline=$(remove_cmdline_param "$cmdline" crashkernel panic_on_warn)
-    # These params can be removed configurably
-    while read -r arg; do
-        cmdline=$(remove_cmdline_param "$cmdline" "$arg")
-    done <<< "$(echo "$2" | xargs -n 1 echo)"
+	# These params should always be removed
+	cmdline=$(remove_cmdline_param "$cmdline" crashkernel panic_on_warn)
+	# These params can be removed configurably
+	while read -r arg; do
+		cmdline=$(remove_cmdline_param "$cmdline" "$arg")
+	done <<< "$(echo "$2" | xargs -n 1 echo)"
 
-    # Always remove "root=X", as we now explicitly generate all kinds
-    # of dump target mount information including root fs.
-    #
-    # We do this before KDUMP_COMMANDLINE_APPEND, if one really cares
-    # about it(e.g. for debug purpose), then can pass "root=X" using
-    # KDUMP_COMMANDLINE_APPEND.
-    cmdline=$(remove_cmdline_param "$cmdline" root)
+	# Always remove "root=X", as we now explicitly generate all kinds
+	# of dump target mount information including root fs.
+	#
+	# We do this before KDUMP_COMMANDLINE_APPEND, if one really cares
+	# about it(e.g. for debug purpose), then can pass "root=X" using
+	# KDUMP_COMMANDLINE_APPEND.
+	cmdline=$(remove_cmdline_param "$cmdline" root)
 
-    # With the help of "--hostonly-cmdline", we can avoid some interitage.
-    cmdline=$(remove_cmdline_param "$cmdline" rd.lvm.lv rd.luks.uuid rd.dm.uuid rd.md.uuid fcoe)
+	# With the help of "--hostonly-cmdline", we can avoid some interitage.
+	cmdline=$(remove_cmdline_param "$cmdline" rd.lvm.lv rd.luks.uuid rd.dm.uuid rd.md.uuid fcoe)
 
-    # Remove netroot, rd.iscsi.initiator and iscsi_initiator since
-    # we get duplicate entries for the same in case iscsi code adds
-    # it as well.
-    cmdline=$(remove_cmdline_param "$cmdline" netroot rd.iscsi.initiator iscsi_initiator)
+	# Remove netroot, rd.iscsi.initiator and iscsi_initiator since
+	# we get duplicate entries for the same in case iscsi code adds
+	# it as well.
+	cmdline=$(remove_cmdline_param "$cmdline" netroot rd.iscsi.initiator iscsi_initiator)
 
-    cmdline="${cmdline} $3"
+	cmdline="${cmdline} $3"
 
-    id=$(get_bootcpu_apicid)
-    if [[ -n ${id} ]] ; then
-        cmdline=$(append_cmdline "$cmdline" disable_cpu_apicid "$id")
-    fi
+	id=$(get_bootcpu_apicid)
+	if [[ -n ${id} ]]; then
+		cmdline=$(append_cmdline "$cmdline" disable_cpu_apicid "$id")
+	fi
 
-    # If any watchdog is used, set it's pretimeout to 0. pretimeout let
-    # watchdog panic the kernel first, and reset the system after the
-    # panic. If the system is already in kdump, panic is not helpful
-    # and only increase the chance of watchdog failure.
-    for i in $(get_watchdog_drvs); do
-        cmdline+=" $i.pretimeout=0"
+	# If any watchdog is used, set it's pretimeout to 0. pretimeout let
+	# watchdog panic the kernel first, and reset the system after the
+	# panic. If the system is already in kdump, panic is not helpful
+	# and only increase the chance of watchdog failure.
+	for i in $(get_watchdog_drvs); do
+		cmdline+=" $i.pretimeout=0"
 
-        if [[ $i == hpwdt ]]; then
-            # hpwdt have a special parameter kdumptimeout, is's only suppose
-            # to be set to non-zero in first kernel. In kdump, non-zero
-            # value could prevent the watchdog from resetting the system.
-            cmdline+=" $i.kdumptimeout=0"
-        fi
-    done
+		if [[ $i == hpwdt ]]; then
+			# hpwdt have a special parameter kdumptimeout, is's only suppose
+			# to be set to non-zero in first kernel. In kdump, non-zero
+			# value could prevent the watchdog from resetting the system.
+			cmdline+=" $i.kdumptimeout=0"
+		fi
+	done
 
-    # Remove trace_buf_size, trace_event
-    cmdline=$(remove_cmdline_param "$cmdline" trace_buf_size trace_event)
-    cmdline="${cmdline} trace_buf_size=1"
+	# Remove trace_buf_size, trace_event
+	cmdline=$(remove_cmdline_param "$cmdline" trace_buf_size trace_event)
+	cmdline="${cmdline} trace_buf_size=1"
 
-    echo "$cmdline"
+	echo "$cmdline"
 }
 
 #get system memory size in the unit of GB
 get_system_size()
 {
-    result=$(grep "System RAM" /proc/iomem | awk -F ":" '{ print $1 }' | tr "[:lower:]" "[:upper:]" | paste -sd+)
-    result="+$result"
-    # replace '-' with '+0x' and '+' with '-0x'
-    sum=$(echo "$result" | sed -e 's/-/K0x/g' -e 's/+/-0x/g' -e 's/K/+/g')
-    size=$(printf "%d\n" $(($sum)))
-    size=$((size / 1024 / 1024 / 1024))
+	result=$(grep "System RAM" /proc/iomem | awk -F ":" '{ print $1 }' | tr "[:lower:]" "[:upper:]" | paste -sd+)
+	result="+$result"
+	# replace '-' with '+0x' and '+' with '-0x'
+	sum=$(echo "$result" | sed -e 's/-/K0x/g' -e 's/+/-0x/g' -e 's/K/+/g')
+	size=$(printf "%d\n" $((sum)))
+	size=$((size / 1024 / 1024 / 1024))
 
-    echo "$size"
+	echo "$size"
 }
 
 get_recommend_size()
 {
-    local mem_size=$1
-    local _ck_cmdline=$2
-    local OLDIFS="$IFS"
+	local mem_size=$1
+	local _ck_cmdline=$2
+	local OLDIFS="$IFS"
 
-    start=${_ck_cmdline: :1}
-    if [[ $mem_size -lt $start ]]; then
-        echo "0M"
-        return
-    fi
-    IFS=','
-    for i in $_ck_cmdline; do
-        end=$(echo "$i" | awk -F "-" '{ print $2 }' | awk -F ":" '{ print $1 }')
-        recommend=$(echo "$i" | awk -F "-" '{ print $2 }' | awk -F ":" '{ print $2 }')
-        size=${end: : -1}
-        unit=${end: -1}
-        if [[ $unit == 'T' ]]; then
-            size=$((size * 1024))
-        fi
-        if [[ $mem_size -lt $size ]]; then
-            echo "$recommend"
-            IFS="$OLDIFS"
-            return
-        fi
-    done
-    IFS="$OLDIFS"
+	start=${_ck_cmdline::1}
+	if [[ $mem_size -lt $start ]]; then
+		echo "0M"
+		return
+	fi
+	IFS=','
+	for i in $_ck_cmdline; do
+		end=$(echo "$i" | awk -F "-" '{ print $2 }' | awk -F ":" '{ print $1 }')
+		recommend=$(echo "$i" | awk -F "-" '{ print $2 }' | awk -F ":" '{ print $2 }')
+		size=${end::-1}
+		unit=${end: -1}
+		if [[ $unit == 'T' ]]; then
+			size=$((size * 1024))
+		fi
+		if [[ $mem_size -lt $size ]]; then
+			echo "$recommend"
+			IFS="$OLDIFS"
+			return
+		fi
+	done
+	IFS="$OLDIFS"
 }
 
 # return recommended size based on current system RAM size
 # $1: kernel version, if not set, will defaults to $(uname -r)
 kdump_get_arch_recommend_size()
 {
-    local kernel=$1 arch
+	local kernel=$1 arch
 
-    if ! [[ -r "/proc/iomem" ]] ; then
-        echo "Error, can not access /proc/iomem."
-        return 1
-    fi
+	if ! [[ -r "/proc/iomem" ]]; then
+		echo "Error, can not access /proc/iomem."
+		return 1
+	fi
 
-    [[ -z "$kernel" ]] && kernel=$(uname -r)
-    ck_cmdline=$(cat "/usr/lib/modules/$kernel/crashkernel.default" 2>/dev/null)
+	[[ -z $kernel ]] && kernel=$(uname -r)
+	ck_cmdline=$(cat "/usr/lib/modules/$kernel/crashkernel.default" 2> /dev/null)
 
-    if [[ -n "$ck_cmdline" ]]; then
-        ck_cmdline=${ck_cmdline#crashkernel=}
-    else
-        arch=$(lscpu | grep Architecture | awk -F ":" '{ print $2 }' | tr '[:lower:]' '[:upper:]')
-        if [[ "$arch" = "X86_64" ]] || [[ "$arch" = "S390X" ]]; then
-            ck_cmdline="1G-4G:160M,4G-64G:192M,64G-1T:256M,1T-:512M"
-        elif [[ "$arch" = "AARCH64" ]]; then
-            ck_cmdline="2G-:448M"
-        elif [[ "$arch" = "PPC64LE" ]]; then
-            if is_fadump_capable; then
-                ck_cmdline="4G-16G:768M,16G-64G:1G,64G-128G:2G,128G-1T:4G,1T-2T:6G,2T-4T:12G,4T-8T:20G,8T-16T:36G,16T-32T:64G,32T-64T:128G,64T-:180G"
-            else
-                ck_cmdline="2G-4G:384M,4G-16G:512M,16G-64G:1G,64G-128G:2G,128G-:4G"
-            fi
-        fi
-    fi
+	if [[ -n $ck_cmdline ]]; then
+		ck_cmdline=${ck_cmdline#crashkernel=}
+	else
+		arch=$(lscpu | grep Architecture | awk -F ":" '{ print $2 }' | tr '[:lower:]' '[:upper:]')
+		if [[ $arch == "X86_64" ]] || [[ $arch == "S390X" ]]; then
+			ck_cmdline="1G-4G:160M,4G-64G:192M,64G-1T:256M,1T-:512M"
+		elif [[ $arch == "AARCH64" ]]; then
+			ck_cmdline="2G-:448M"
+		elif [[ $arch == "PPC64LE" ]]; then
+			if is_fadump_capable; then
+				ck_cmdline="4G-16G:768M,16G-64G:1G,64G-128G:2G,128G-1T:4G,1T-2T:6G,2T-4T:12G,4T-8T:20G,8T-16T:36G,16T-32T:64G,32T-64T:128G,64T-:180G"
+			else
+				ck_cmdline="2G-4G:384M,4G-16G:512M,16G-64G:1G,64G-128G:2G,128G-:4G"
+			fi
+		fi
+	fi
 
-    ck_cmdline=${ck_cmdline//-:/-102400T:}
-    sys_mem=$(get_system_size)
+	ck_cmdline=${ck_cmdline//-:/-102400T:}
+	sys_mem=$(get_system_size)
 
-    get_recommend_size "$sys_mem" "$ck_cmdline"
+	get_recommend_size "$sys_mem" "$ck_cmdline"
 }
 
 # Print all underlying crypt devices of a block device
@@ -855,18 +859,18 @@ kdump_get_arch_recommend_size()
 # $1: the block device to be checked in maj:min format
 get_luks_crypt_dev()
 {
-    local _type
+	local _type
 
-    [[ -b /dev/block/$1 ]] || return 1
+	[[ -b /dev/block/$1 ]] || return 1
 
-    _type=$(eval "$(blkid -u filesystem,crypto -o export -- "/dev/block/$1"); echo \$TYPE")
-    [[ $_type == "crypto_LUKS" ]] && echo "$1"
+	_type=$(eval "$(blkid -u filesystem,crypto -o export -- "/dev/block/$1"); echo \$TYPE")
+	[[ $_type == "crypto_LUKS" ]] && echo "$1"
 
-    for _x in "/sys/dev/block/$1/slaves/"*; do
-        [[ -f $_x/dev ]] || continue
-        [[ $_x/subsystem -ef /sys/class/block ]] || continue
-        get_luks_crypt_dev "$(< "$_x/dev")"
-    done
+	for _x in "/sys/dev/block/$1/slaves/"*; do
+		[[ -f $_x/dev ]] || continue
+		[[ $_x/subsystem -ef /sys/class/block ]] || continue
+		get_luks_crypt_dev "$(< "$_x/dev")"
+	done
 }
 
 # kdump_get_maj_min <device>
@@ -874,90 +878,90 @@ get_luks_crypt_dev()
 # Example:
 # $ get_maj_min /dev/sda2
 # 8:2
-kdump_get_maj_min() {
-    local _majmin
-    _majmin="$(stat -L -c '%t:%T' "$1" 2> /dev/null)"
-    printf "%s" "$((0x${_majmin%:*})):$((0x${_majmin#*:}))"
+kdump_get_maj_min()
+{
+	local _majmin
+	_majmin="$(stat -L -c '%t:%T' "$1" 2> /dev/null)"
+	printf "%s" "$((0x${_majmin%:*})):$((0x${_majmin#*:}))"
 }
 
 get_all_kdump_crypt_dev()
 {
-    local _dev
+	local _dev
 
-    for _dev in $(get_block_dump_target); do
-        get_luks_crypt_dev "$(kdump_get_maj_min "$_dev")"
-    done
+	for _dev in $(get_block_dump_target); do
+		get_luks_crypt_dev "$(kdump_get_maj_min "$_dev")"
+	done
 }
 
 check_vmlinux()
 {
-    # Use readelf to check if it's a valid ELF
-    readelf -h "$1" &>/dev/null || return 1
+	# Use readelf to check if it's a valid ELF
+	readelf -h "$1" &> /dev/null || return 1
 }
 
 get_vmlinux_size()
 {
-    local size=0 _msize
+	local size=0 _msize
 
-    while read -r _msize; do
-        size=$(( size + _msize ))
-    done <<< "$(readelf -l -W "$1" | awk '/^  LOAD/{print $6}' 2>/dev/stderr)"
+	while read -r _msize; do
+		size=$((size + _msize))
+	done <<< "$(readelf -l -W "$1" | awk '/^  LOAD/{print $6}' 2> /dev/stderr)"
 
-    echo $size
+	echo $size
 }
 
 try_decompress()
 {
-    # The obscure use of the "tr" filter is to work around older versions of
-    # "grep" that report the byte offset of the line instead of the pattern.
+	# The obscure use of the "tr" filter is to work around older versions of
+	# "grep" that report the byte offset of the line instead of the pattern.
 
-    # Try to find the header ($1) and decompress from here
-    for pos in $(tr "$1\n$2" "\n$2=" < "$4" | grep -abo "^$2")
-    do
-        if ! type -P "$3" > /dev/null; then
-            ddebug "Signiature detected but '$3' is missing, skip this decompressor"
-            break
-        fi
+	# Try to find the header ($1) and decompress from here
+	for pos in $(tr "$1\n$2" "\n$2=" < "$4" | grep -abo "^$2"); do
+		if ! type -P "$3" > /dev/null; then
+			ddebug "Signiature detected but '$3' is missing, skip this decompressor"
+			break
+		fi
 
-        pos=${pos%%:*}
-        tail "-c+$pos" "$img" | $3 > "$5" 2> /dev/null
-        if check_vmlinux "$5"; then
-            ddebug "Kernel is extracted with '$3'"
-            return 0
-        fi
-    done
+		pos=${pos%%:*}
+		tail "-c+$pos" "$img" | $3 > "$5" 2> /dev/null
+		if check_vmlinux "$5"; then
+			ddebug "Kernel is extracted with '$3'"
+			return 0
+		fi
+	done
 
-    return 1
+	return 1
 }
 
 # Borrowed from linux/scripts/extract-vmlinux
 get_kernel_size()
 {
-    # Prepare temp files:
-    local tmp img=$1
+	# Prepare temp files:
+	local tmp img=$1
 
-    tmp=$(mktemp /tmp/vmlinux-XXX)
-    trap 'rm -f "$tmp"' 0
+	tmp=$(mktemp /tmp/vmlinux-XXX)
+	trap 'rm -f "$tmp"' 0
 
-    # Try to check if it's a vmlinux already
-    check_vmlinux "$img" && get_vmlinux_size "$img" && return 0
+	# Try to check if it's a vmlinux already
+	check_vmlinux "$img" && get_vmlinux_size "$img" && return 0
 
-    # That didn't work, so retry after decompression.
-    try_decompress '\037\213\010' xy    gunzip    "$img" "$tmp" || \
-    try_decompress '\3757zXZ\000' abcde unxz      "$img" "$tmp" || \
-    try_decompress 'BZh'          xy    bunzip2   "$img" "$tmp" || \
-    try_decompress '\135\0\0\0'   xxx   unlzma    "$img" "$tmp" || \
-    try_decompress '\211\114\132' xy    'lzop -d' "$img" "$tmp" || \
-    try_decompress '\002!L\030'   xxx   'lz4 -d'  "$img" "$tmp" || \
-    try_decompress '(\265/\375'   xxx   unzstd    "$img" "$tmp"
+	# That didn't work, so retry after decompression.
+	try_decompress '\037\213\010' xy gunzip "$img" "$tmp" ||
+		try_decompress '\3757zXZ\000' abcde unxz "$img" "$tmp" ||
+		try_decompress 'BZh' xy bunzip2 "$img" "$tmp" ||
+		try_decompress '\135\0\0\0' xxx unlzma "$img" "$tmp" ||
+		try_decompress '\211\114\132' xy 'lzop -d' "$img" "$tmp" ||
+		try_decompress '\002!L\030' xxx 'lz4 -d' "$img" "$tmp" ||
+		try_decompress '(\265/\375' xxx unzstd "$img" "$tmp"
 
-    # Finally check for uncompressed images or objects:
-    [[ $? -eq 0 ]] && get_vmlinux_size "$tmp" && return 0
+	# Finally check for uncompressed images or objects:
+	[[ $? -eq 0 ]] && get_vmlinux_size "$tmp" && return 0
 
-    # Fallback to use iomem
-    local _size=0 _seg
-    while read -r _seg; do
-        _size=$(( _size + 0x${_seg#*-} - 0x${_seg%-*} ))
-    done <<< "$(grep -E "Kernel (code|rodata|data|bss)" /proc/iomem | cut -d ":" -f 1)"
-    echo $_size
+	# Fallback to use iomem
+	local _size=0 _seg
+	while read -r _seg; do
+		_size=$((_size + 0x${_seg#*-} - 0x${_seg%-*}))
+	done <<< "$(grep -E "Kernel (code|rodata|data|bss)" /proc/iomem | cut -d ":" -f 1)"
+	echo $_size
 }