From 89a2b3181d613e94693f351da02d6f560653ec6f Mon Sep 17 00:00:00 2001 From: CentOS Sources Date: Tue, 15 Dec 2020 10:59:59 -0500 Subject: [PATCH] import kexec-tools-2.0.20-34.el8_3.1 --- .gitignore | 3 + .kexec-tools.metadata | 3 + SOURCES/98-kexec.rules | 16 + SOURCES/98-kexec.rules.ppc64 | 15 + SOURCES/dracut-early-kdump-module-setup.sh | 65 + SOURCES/dracut-early-kdump.sh | 75 + SOURCES/dracut-kdump-capture.service | 30 + SOURCES/dracut-kdump-emergency.service | 28 + SOURCES/dracut-kdump-emergency.target | 14 + SOURCES/dracut-kdump-error-handler.service | 33 + SOURCES/dracut-kdump-error-handler.sh | 10 + SOURCES/dracut-kdump.sh | 271 +++ SOURCES/dracut-module-setup.sh | 840 +++++++ SOURCES/dracut-monitor_dd_progress | 28 + SOURCES/early-kdump-howto.txt | 95 + SOURCES/fadump-howto.txt | 338 +++ SOURCES/kdump-dep-generator.sh | 22 + SOURCES/kdump-in-cluster-environment.txt | 91 + SOURCES/kdump-lib-initramfs.sh | 214 ++ SOURCES/kdump-lib.sh | 745 ++++++ SOURCES/kdump-udev-throttler | 42 + SOURCES/kdump.conf | 183 ++ SOURCES/kdump.conf.5 | 370 +++ SOURCES/kdump.service | 15 + SOURCES/kdump.sysconfig | 37 + SOURCES/kdump.sysconfig.aarch64 | 37 + SOURCES/kdump.sysconfig.i386 | 40 + SOURCES/kdump.sysconfig.ppc64 | 42 + SOURCES/kdump.sysconfig.ppc64le | 42 + SOURCES/kdump.sysconfig.s390x | 43 + SOURCES/kdump.sysconfig.x86_64 | 40 + SOURCES/kdumpctl | 1303 ++++++++++ SOURCES/kdumpctl.8 | 50 + SOURCES/kexec-kdump-howto.txt | 887 +++++++ ...ove-it-back-from-util_lib-elf_info.c.patch | 181 ++ ...20-Cleanup-remove-the-read_elf_kcore.patch | 84 + ...-definition-about-the-variable-fname.patch | 47 + ...t-the-size-of-vmcore-dmesg.txt-to-2G.patch | 55 + ...-with-a-lot-of-resource-entries-in-p.patch | 82 + ...cate-memory-space-avoiding-reserved-.patch | 248 ++ ...t-helper-functions-for-handling-memo.patch | 89 + ...lign-PMD_SECTION_MASK-with-PHYS_MASK.patch | 36 + ...e-positive-failure-in-mem_seciton-va.patch | 80 + ...eader-offset-overflow-with-large-pfn.patch | 42 + ...-PATCH-Introduce-check-params-option.patch | 255 ++ ...ile-Fix-build-errors-in-static-build.patch | 65 + ...move-duplicated-variable-definitions.patch | 103 + ...CH-cope-with-not-present-mem-section.patch | 65 + ...slr-fix-failure-of-calculating-kaslr.patch | 213 ++ ...ore-dmesg.c-Fix-shifting-error-repor.patch | 38 + SOURCES/live-image-kdump-howto.txt | 25 + SOURCES/mkdumprd | 482 ++++ SOURCES/mkdumprd.8 | 33 + ...ls-2.0.16-koji-build-fail-workaround.patch | 13 + ...ppic-fix-issues-with-hardening-flags.patch | 51 + ...64-Add-support-for-ARMv8.2-LVA-52-bi.patch | 235 ++ SOURCES/supported-kdump-targets.txt | 128 + SPECS/kexec-tools.spec | 2088 +++++++++++++++++ 58 files changed, 10805 insertions(+) create mode 100644 .gitignore create mode 100644 .kexec-tools.metadata create mode 100644 SOURCES/98-kexec.rules create mode 100644 SOURCES/98-kexec.rules.ppc64 create mode 100755 SOURCES/dracut-early-kdump-module-setup.sh create mode 100755 SOURCES/dracut-early-kdump.sh create mode 100644 SOURCES/dracut-kdump-capture.service create mode 100644 SOURCES/dracut-kdump-emergency.service create mode 100644 SOURCES/dracut-kdump-emergency.target create mode 100644 SOURCES/dracut-kdump-error-handler.service create mode 100755 SOURCES/dracut-kdump-error-handler.sh create mode 100755 SOURCES/dracut-kdump.sh create mode 100755 SOURCES/dracut-module-setup.sh create mode 100644 SOURCES/dracut-monitor_dd_progress create mode 100644 SOURCES/early-kdump-howto.txt create mode 100644 SOURCES/fadump-howto.txt create mode 100644 SOURCES/kdump-dep-generator.sh create mode 100644 SOURCES/kdump-in-cluster-environment.txt create mode 100755 SOURCES/kdump-lib-initramfs.sh create mode 100755 SOURCES/kdump-lib.sh create mode 100755 SOURCES/kdump-udev-throttler create mode 100644 SOURCES/kdump.conf create mode 100644 SOURCES/kdump.conf.5 create mode 100644 SOURCES/kdump.service create mode 100644 SOURCES/kdump.sysconfig create mode 100644 SOURCES/kdump.sysconfig.aarch64 create mode 100644 SOURCES/kdump.sysconfig.i386 create mode 100644 SOURCES/kdump.sysconfig.ppc64 create mode 100644 SOURCES/kdump.sysconfig.ppc64le create mode 100644 SOURCES/kdump.sysconfig.s390x create mode 100644 SOURCES/kdump.sysconfig.x86_64 create mode 100755 SOURCES/kdumpctl create mode 100644 SOURCES/kdumpctl.8 create mode 100644 SOURCES/kexec-kdump-howto.txt create mode 100644 SOURCES/kexec-tools-2.0.20-Cleanup-move-it-back-from-util_lib-elf_info.c.patch create mode 100644 SOURCES/kexec-tools-2.0.20-Cleanup-remove-the-read_elf_kcore.patch create mode 100644 SOURCES/kexec-tools-2.0.20-Fix-an-error-definition-about-the-variable-fname.patch create mode 100644 SOURCES/kexec-tools-2.0.20-Limit-the-size-of-vmcore-dmesg.txt-to-2G.patch create mode 100644 SOURCES/kexec-tools-2.0.20-arm64-kdump-deal-with-a-lot-of-resource-entries-in-p.patch create mode 100644 SOURCES/kexec-tools-2.0.20-arm64-kexec-allocate-memory-space-avoiding-reserved-.patch create mode 100644 SOURCES/kexec-tools-2.0.20-kexec-add-variant-helper-functions-for-handling-memo.patch create mode 100644 SOURCES/kexec-tools-2.0.20-makedumpfile-PATCH-Align-PMD_SECTION_MASK-with-PHYS_MASK.patch create mode 100644 SOURCES/kexec-tools-2.0.20-makedumpfile-PATCH-Avoid-false-positive-failure-in-mem_seciton-va.patch create mode 100644 SOURCES/kexec-tools-2.0.20-makedumpfile-PATCH-Fix-cd_header-offset-overflow-with-large-pfn.patch create mode 100644 SOURCES/kexec-tools-2.0.20-makedumpfile-PATCH-Introduce-check-params-option.patch create mode 100644 SOURCES/kexec-tools-2.0.20-makedumpfile-PATCH-Makefile-Fix-build-errors-in-static-build.patch create mode 100644 SOURCES/kexec-tools-2.0.20-makedumpfile-PATCH-Remove-duplicated-variable-definitions.patch create mode 100644 SOURCES/kexec-tools-2.0.20-makedumpfile-PATCH-cope-with-not-present-mem-section.patch create mode 100644 SOURCES/kexec-tools-2.0.20-makedumpfile-PATCH-sadump-kaslr-fix-failure-of-calculating-kaslr.patch create mode 100644 SOURCES/kexec-tools-2.0.20-vmcore-dmesg-vmcore-dmesg.c-Fix-shifting-error-repor.patch create mode 100644 SOURCES/live-image-kdump-howto.txt create mode 100644 SOURCES/mkdumprd create mode 100644 SOURCES/mkdumprd.8 create mode 100644 SOURCES/rhelonly-kexec-tools-2.0.16-koji-build-fail-workaround.patch create mode 100644 SOURCES/rhelonly-kexec-tools-2.0.18-eppic-fix-issues-with-hardening-flags.patch create mode 100644 SOURCES/rhonly-kexec-tools-2.0.18-makedumpfile-arm64-Add-support-for-ARMv8.2-LVA-52-bi.patch create mode 100644 SOURCES/supported-kdump-targets.txt create mode 100644 SPECS/kexec-tools.spec diff --git a/.gitignore b/.gitignore new file mode 100644 index 0000000..e7cea8f --- /dev/null +++ b/.gitignore @@ -0,0 +1,3 @@ +SOURCES/eppic_050615.tar.gz +SOURCES/kexec-tools-2.0.20.tar.xz +SOURCES/makedumpfile-1.6.7.tar.gz diff --git a/.kexec-tools.metadata b/.kexec-tools.metadata new file mode 100644 index 0000000..431b034 --- /dev/null +++ b/.kexec-tools.metadata @@ -0,0 +1,3 @@ +a096c8e0892b559f40b01916aae240652f75b68a SOURCES/eppic_050615.tar.gz +5d9acd2e741d356d4a48fe4f2d63f66ba431051d SOURCES/kexec-tools-2.0.20.tar.xz +42941a0219d57d99909616778835e5d9ba890711 SOURCES/makedumpfile-1.6.7.tar.gz diff --git a/SOURCES/98-kexec.rules b/SOURCES/98-kexec.rules new file mode 100644 index 0000000..b73b701 --- /dev/null +++ b/SOURCES/98-kexec.rules @@ -0,0 +1,16 @@ +SUBSYSTEM=="cpu", ACTION=="add", GOTO="kdump_reload" +SUBSYSTEM=="cpu", ACTION=="remove", GOTO="kdump_reload" +SUBSYSTEM=="memory", ACTION=="online", GOTO="kdump_reload" +SUBSYSTEM=="memory", ACTION=="offline", GOTO="kdump_reload" + +GOTO="kdump_reload_end" + +LABEL="kdump_reload" + +# If kdump is not loaded, calling kdump-udev-throttle will end up +# doing nothing, but systemd-run will always generate extra logs for +# each call, so trigger the kdump-udev-throttler only if kdump +# service is active to avoid unnecessary logs +RUN+="/bin/sh -c '/usr/bin/systemctl is-active kdump.service || exit 0; /usr/bin/systemd-run --quiet --no-block /usr/lib/udev/kdump-udev-throttler'" + +LABEL="kdump_reload_end" diff --git a/SOURCES/98-kexec.rules.ppc64 b/SOURCES/98-kexec.rules.ppc64 new file mode 100644 index 0000000..1a91220 --- /dev/null +++ b/SOURCES/98-kexec.rules.ppc64 @@ -0,0 +1,15 @@ +SUBSYSTEM=="cpu", ACTION=="online", GOTO="kdump_reload" +SUBSYSTEM=="memory", ACTION=="online", GOTO="kdump_reload" +SUBSYSTEM=="memory", ACTION=="offline", GOTO="kdump_reload" + +GOTO="kdump_reload_end" + +LABEL="kdump_reload" + +# If kdump is not loaded, calling kdump-udev-throttle will end up +# doing nothing, but systemd-run will always generate extra logs for +# each call, so trigger the kdump-udev-throttler only if kdump +# service is active to avoid unnecessary logs +RUN+="/bin/sh -c '/usr/bin/systemctl is-active kdump.service || exit 0; /usr/bin/systemd-run --quiet --no-block /usr/lib/udev/kdump-udev-throttler'" + +LABEL="kdump_reload_end" diff --git a/SOURCES/dracut-early-kdump-module-setup.sh b/SOURCES/dracut-early-kdump-module-setup.sh new file mode 100755 index 0000000..e069867 --- /dev/null +++ b/SOURCES/dracut-early-kdump-module-setup.sh @@ -0,0 +1,65 @@ +#!/bin/bash + +. /etc/sysconfig/kdump +. /lib/kdump/kdump-lib.sh + +KDUMP_KERNEL="" +KDUMP_INITRD="" + +check() { + if [ ! -f /etc/sysconfig/kdump ] || [ ! -f /lib/kdump/kdump-lib.sh ]\ + || [ -n "${IN_KDUMP}" ] + then + return 1 + fi + return 255 +} + +depends() { + echo "base shutdown" + return 0 +} + +prepare_kernel_initrd() { + KDUMP_BOOTDIR=$(check_boot_dir "${KDUMP_BOOTDIR}") + if [ -z "$KDUMP_KERNELVER" ]; then + kdump_kver=`uname -r` + if [ "$kernel" != "$kdump_kver" ]; then + dwarn "Using current kernel version '$kdump_kver' for early kdump," \ + "but the initramfs is generated for kernel version '$kernel'" + fi + else + kdump_kver=$KDUMP_KERNELVER + fi + KDUMP_KERNEL="${KDUMP_BOOTDIR}/${KDUMP_IMG}-${kdump_kver}${KDUMP_IMG_EXT}" + KDUMP_INITRD="${KDUMP_BOOTDIR}/initramfs-${kdump_kver}kdump.img" +} + +install() { + prepare_kernel_initrd + if [ ! -f "$KDUMP_KERNEL" ]; then + derror "Could not find required kernel for earlykdump," \ + "earlykdump will not work!" + return 1 + fi + if [ ! -f "$KDUMP_INITRD" ]; then + derror "Could not find required kdump initramfs for earlykdump," \ + "please ensure kdump initramfs is generated first," \ + "earlykdump will not work!" + return 1 + fi + + inst_multiple tail find cut dirname hexdump + inst_simple "/etc/sysconfig/kdump" + inst_binary "/usr/sbin/kexec" + inst_binary "/usr/bin/gawk" "/usr/bin/awk" + inst_script "/lib/kdump/kdump-lib.sh" "/lib/kdump-lib.sh" + inst_hook cmdline 00 "$moddir/early-kdump.sh" + inst_binary "$KDUMP_KERNEL" + inst_binary "$KDUMP_INITRD" + + ln_r "$KDUMP_KERNEL" "${KDUMP_BOOTDIR}/${KDUMP_IMG}-earlykdump${KDUMP_IMG_EXT}" + ln_r "$KDUMP_INITRD" "${KDUMP_BOOTDIR}/initramfs-earlykdump.img" + + chmod -x "${initdir}/$KDUMP_KERNEL" +} diff --git a/SOURCES/dracut-early-kdump.sh b/SOURCES/dracut-early-kdump.sh new file mode 100755 index 0000000..69a34eb --- /dev/null +++ b/SOURCES/dracut-early-kdump.sh @@ -0,0 +1,75 @@ +#! /bin/sh + +KEXEC=/sbin/kexec +standard_kexec_args="-p" + +EARLY_KDUMP_INITRD="" +EARLY_KDUMP_KERNEL="" +EARLY_KDUMP_CMDLINE="" +EARLY_KDUMP_KERNELVER="" +EARLY_KEXEC_ARGS="" + +. /etc/sysconfig/kdump +. /lib/dracut-lib.sh +. /lib/kdump-lib.sh + +prepare_parameters() +{ + EARLY_KDUMP_CMDLINE=$(prepare_cmdline "${KDUMP_COMMANDLINE}" "${KDUMP_COMMANDLINE_REMOVE}" "${KDUMP_COMMANDLINE_APPEND}") + KDUMP_BOOTDIR=$(check_boot_dir "${KDUMP_BOOTDIR}") + + EARLY_KDUMP_KERNEL="${KDUMP_BOOTDIR}/${KDUMP_IMG}-earlykdump${KDUMP_IMG_EXT}" + EARLY_KDUMP_INITRD="${KDUMP_BOOTDIR}/initramfs-earlykdump.img" +} + +early_kdump_load() +{ + check_kdump_feasibility + if [ $? -ne 0 ]; then + return 1 + fi + + if is_fadump_capable; then + echo "WARNING: early kdump doesn't support fadump." + return 1 + fi + + check_current_kdump_status + if [ $? == 0 ]; then + return 1 + fi + + prepare_parameters + + EARLY_KEXEC_ARGS=$(prepare_kexec_args "${KEXEC_ARGS}") + + if is_secure_boot_enforced; then + echo "Secure Boot is enabled. Using kexec file based syscall." + EARLY_KEXEC_ARGS="$EARLY_KEXEC_ARGS -s" + fi + + $KEXEC ${EARLY_KEXEC_ARGS} $standard_kexec_args \ + --command-line="$EARLY_KDUMP_CMDLINE" \ + --initrd=$EARLY_KDUMP_INITRD $EARLY_KDUMP_KERNEL + if [ $? == 0 ]; then + echo "kexec: loaded early-kdump kernel" + return 0 + else + echo "kexec: failed to load early-kdump kernel" + return 1 + fi +} + +set_early_kdump() +{ + if getargbool 0 rd.earlykdump; then + echo "early-kdump is enabled." + early_kdump_load + else + echo "early-kdump is disabled." + fi + + return 0 +} + +set_early_kdump diff --git a/SOURCES/dracut-kdump-capture.service b/SOURCES/dracut-kdump-capture.service new file mode 100644 index 0000000..3f20aba --- /dev/null +++ b/SOURCES/dracut-kdump-capture.service @@ -0,0 +1,30 @@ +# This file is part of systemd. +# +# systemd is free software; you can redistribute it and/or modify it +# under the terms of the GNU Lesser General Public License as published by +# the Free Software Foundation; either version 2.1 of the License, or +# (at your option) any later version. + +[Unit] +Description=Kdump Vmcore Save Service +After=initrd.target initrd-parse-etc.service sysroot.mount +After=dracut-initqueue.service dracut-pre-mount.service dracut-mount.service dracut-pre-pivot.service +Before=initrd-cleanup.service +ConditionPathExists=/etc/initrd-release +OnFailure=emergency.target +OnFailureJobMode=isolate + +[Service] +Environment=DRACUT_SYSTEMD=1 +Environment=NEWROOT=/sysroot +Type=oneshot +ExecStart=/bin/kdump.sh +StandardInput=null +StandardOutput=syslog +StandardError=syslog+console +KillMode=process +RemainAfterExit=yes + +# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash +# terminates cleanly. +KillSignal=SIGHUP diff --git a/SOURCES/dracut-kdump-emergency.service b/SOURCES/dracut-kdump-emergency.service new file mode 100644 index 0000000..e023284 --- /dev/null +++ b/SOURCES/dracut-kdump-emergency.service @@ -0,0 +1,28 @@ +# This file is part of systemd. +# +# systemd is free software; you can redistribute it and/or modify it +# under the terms of the GNU Lesser General Public License as published by +# the Free Software Foundation; either version 2.1 of the License, or +# (at your option) any later version. + +# This service will be placed in kdump initramfs and replace both the systemd +# emergency service and dracut emergency shell. IOW, any emergency will be +# kick this service and in turn isolating to kdump error handler. + +[Unit] +Description=Kdump Emergency +DefaultDependencies=no +IgnoreOnIsolate=yes + +[Service] +ExecStart=/usr/bin/systemctl --no-block isolate kdump-error-handler.service +Type=oneshot +StandardInput=tty-force +StandardOutput=inherit +StandardError=inherit +KillMode=process +IgnoreSIGPIPE=no + +# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash +# terminates cleanly. +KillSignal=SIGHUP diff --git a/SOURCES/dracut-kdump-emergency.target b/SOURCES/dracut-kdump-emergency.target new file mode 100644 index 0000000..a1bb493 --- /dev/null +++ b/SOURCES/dracut-kdump-emergency.target @@ -0,0 +1,14 @@ +# This file is part of systemd. +# +# systemd is free software; you can redistribute it and/or modify it +# under the terms of the GNU Lesser General Public License as published by +# the Free Software Foundation; either version 2.1 of the License, or +# (at your option) any later version. + +[Unit] +Description=Emergency Mode +Documentation=man:systemd.special(7) +Requires=emergency.service +After=emergency.service +AllowIsolate=yes +IgnoreOnIsolate=yes diff --git a/SOURCES/dracut-kdump-error-handler.service b/SOURCES/dracut-kdump-error-handler.service new file mode 100644 index 0000000..a23b75e --- /dev/null +++ b/SOURCES/dracut-kdump-error-handler.service @@ -0,0 +1,33 @@ +# This file is part of systemd. +# +# systemd is free software; you can redistribute it and/or modify it +# under the terms of the GNU Lesser General Public License as published by +# the Free Software Foundation; either version 2.1 of the License, or +# (at your option) any later version. + +# This service will run the real kdump error handler code. Executing the +# failure action configured in kdump.conf + +[Unit] +Description=Kdump Error Handler +DefaultDependencies=no +After=systemd-vconsole-setup.service +Wants=systemd-vconsole-setup.service +AllowIsolate=yes + +[Service] +Environment=HOME=/ +Environment=DRACUT_SYSTEMD=1 +Environment=NEWROOT=/sysroot +WorkingDirectory=/ +ExecStart=/bin/kdump-error-handler.sh +Type=oneshot +StandardInput=tty-force +StandardOutput=inherit +StandardError=inherit +KillMode=process +IgnoreSIGPIPE=no + +# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash +# terminates cleanly. +KillSignal=SIGHUP diff --git a/SOURCES/dracut-kdump-error-handler.sh b/SOURCES/dracut-kdump-error-handler.sh new file mode 100755 index 0000000..fc2b932 --- /dev/null +++ b/SOURCES/dracut-kdump-error-handler.sh @@ -0,0 +1,10 @@ +#!/bin/sh + +. /lib/kdump-lib-initramfs.sh + +set -o pipefail +export PATH=$PATH:$KDUMP_SCRIPT_DIR + +get_kdump_confs +do_failure_action +do_final_action diff --git a/SOURCES/dracut-kdump.sh b/SOURCES/dracut-kdump.sh new file mode 100755 index 0000000..6f948fc --- /dev/null +++ b/SOURCES/dracut-kdump.sh @@ -0,0 +1,271 @@ +#!/bin/sh + +# continue here only if we have to save dump. +if [ -f /etc/fadump.initramfs ] && [ ! -f /proc/device-tree/rtas/ibm,kernel-dump ] && [ ! -f /proc/device-tree/ibm,opal/dump/mpipl-boot ]; then + exit 0 +fi + +exec &> /dev/console +. /lib/dracut-lib.sh +. /lib/kdump-lib-initramfs.sh + +set -o pipefail +DUMP_RETVAL=0 + +export PATH=$PATH:$KDUMP_SCRIPT_DIR + +do_dump() +{ + local _ret + + eval $DUMP_INSTRUCTION + _ret=$? + + if [ $_ret -ne 0 ]; then + echo "kdump: saving vmcore failed" + fi + + return $_ret +} + +do_kdump_pre() +{ + local _ret + + if [ -n "$KDUMP_PRE" ]; then + "$KDUMP_PRE" + _ret=$? + if [ $_ret -ne 0 ]; then + echo "kdump: $KDUMP_PRE exited with $_ret status" + return $_ret + fi + fi + + # if any script fails, it just raises warning and continues + if [ -d /etc/kdump/pre.d ]; then + for file in /etc/kdump/pre.d/*; do + "$file" + _ret=$? + if [ $_ret -ne 0 ]; then + echo "kdump: $file exited with $_ret status" + fi + done + fi + return 0 +} + +do_kdump_post() +{ + local _ret + + if [ -d /etc/kdump/post.d ]; then + for file in /etc/kdump/post.d/*; do + "$file" "$1" + _ret=$? + if [ $_ret -ne 0 ]; then + echo "kdump: $file exited with $_ret status" + fi + done + fi + + if [ -n "$KDUMP_POST" ]; then + "$KDUMP_POST" "$1" + _ret=$? + if [ $_ret -ne 0 ]; then + echo "kdump: $KDUMP_POST exited with $_ret status" + fi + fi +} + +add_dump_code() +{ + DUMP_INSTRUCTION=$1 +} + +dump_raw() +{ + local _raw=$1 + + [ -b "$_raw" ] || return 1 + + echo "kdump: saving to raw disk $_raw" + + if ! $(echo -n $CORE_COLLECTOR|grep -q makedumpfile); then + _src_size=`ls -l /proc/vmcore | cut -d' ' -f5` + _src_size_mb=$(($_src_size / 1048576)) + monitor_dd_progress $_src_size_mb & + fi + + echo "kdump: saving vmcore" + $CORE_COLLECTOR /proc/vmcore | dd of=$_raw bs=$DD_BLKSIZE >> /tmp/dd_progress_file 2>&1 || return 1 + sync + + echo "kdump: saving vmcore complete" + return 0 +} + +dump_ssh() +{ + local _opt="-i $1 -o BatchMode=yes -o StrictHostKeyChecking=yes" + local _dir="$KDUMP_PATH/$HOST_IP-$DATEDIR" + local _host=$2 + + echo "kdump: saving to $_host:$_dir" + + cat /var/lib/random-seed > /dev/urandom + ssh -q $_opt $_host mkdir -p $_dir || return 1 + + save_vmcore_dmesg_ssh ${DMESG_COLLECTOR} ${_dir} "${_opt}" $_host + save_opalcore_ssh ${_dir} "${_opt}" $_host + + echo "kdump: saving vmcore" + + if [ "${CORE_COLLECTOR%%[[:blank:]]*}" = "scp" ]; then + scp -q $_opt /proc/vmcore "$_host:$_dir/vmcore-incomplete" || return 1 + ssh $_opt $_host "mv $_dir/vmcore-incomplete $_dir/vmcore" || return 1 + else + $CORE_COLLECTOR /proc/vmcore | ssh $_opt $_host "dd bs=512 of=$_dir/vmcore-incomplete" || return 1 + ssh $_opt $_host "mv $_dir/vmcore-incomplete $_dir/vmcore.flat" || return 1 + fi + + echo "kdump: saving vmcore complete" + return 0 +} + +save_opalcore_ssh() { + local _path=$1 + local _opts="$2" + local _location=$3 + + if [ ! -f $OPALCORE ]; then + # Check if we are on an old kernel that uses a different path + if [ -f /sys/firmware/opal/core ]; then + OPALCORE="/sys/firmware/opal/core" + else + return 0 + fi + fi + + echo "kdump: saving opalcore" + scp $_opts $OPALCORE $_location:$_path/opalcore-incomplete + if [ $? -ne 0 ]; then + echo "kdump: saving opalcore failed" + return 1 + fi + + ssh $_opts $_location mv $_path/opalcore-incomplete $_path/opalcore + echo "kdump: saving opalcore complete" + return 0 +} + +save_vmcore_dmesg_ssh() { + local _dmesg_collector=$1 + local _path=$2 + local _opts="$3" + local _location=$4 + + echo "kdump: saving vmcore-dmesg.txt" + $_dmesg_collector /proc/vmcore | ssh $_opts $_location "dd of=$_path/vmcore-dmesg-incomplete.txt" + _exitcode=$? + + if [ $_exitcode -eq 0 ]; then + ssh -q $_opts $_location mv $_path/vmcore-dmesg-incomplete.txt $_path/vmcore-dmesg.txt + echo "kdump: saving vmcore-dmesg.txt complete" + else + echo "kdump: saving vmcore-dmesg.txt failed" + fi +} + +get_host_ip() +{ + local _host + if is_nfs_dump_target || is_ssh_dump_target + then + kdumpnic=$(getarg kdumpnic=) + [ -z "$kdumpnic" ] && echo "kdump: failed to get kdumpnic!" && return 1 + _host=`ip addr show dev $kdumpnic|grep '[ ]*inet'` + [ $? -ne 0 ] && echo "kdump: wrong kdumpnic: $kdumpnic" && return 1 + _host=`echo $_host | head -n 1 | cut -d' ' -f2` + _host="${_host%%/*}" + [ -z "$_host" ] && echo "kdump: wrong kdumpnic: $kdumpnic" && return 1 + HOST_IP=$_host + fi + return 0 +} + +read_kdump_conf() +{ + if [ ! -f "$KDUMP_CONF" ]; then + echo "kdump: $KDUMP_CONF not found" + return + fi + + get_kdump_confs + + # rescan for add code for dump target + while read config_opt config_val; + do + # remove inline comments after the end of a directive. + case "$config_opt" in + dracut_args) + config_val=$(get_dracut_args_target "$config_val") + if [ -n "$config_val" ]; then + config_val=$(get_mntpoint_from_target "$config_val") + add_dump_code "dump_fs $config_val" + fi + ;; + ext[234]|xfs|btrfs|minix|nfs) + config_val=$(get_mntpoint_from_target "$config_val") + add_dump_code "dump_fs $config_val" + ;; + raw) + add_dump_code "dump_raw $config_val" + ;; + ssh) + add_dump_code "dump_ssh $SSH_KEY_LOCATION $config_val" + ;; + esac + done <<< "$(read_strip_comments $KDUMP_CONF)" +} + +fence_kdump_notify() +{ + if [ -n "$FENCE_KDUMP_NODES" ]; then + $FENCE_KDUMP_SEND $FENCE_KDUMP_ARGS $FENCE_KDUMP_NODES & + fi +} + +read_kdump_conf +fence_kdump_notify + +get_host_ip +if [ $? -ne 0 ]; then + echo "kdump: get_host_ip exited with non-zero status!" + exit 1 +fi + +if [ -z "$DUMP_INSTRUCTION" ]; then + add_dump_code "dump_fs $NEWROOT" +fi + +do_kdump_pre +if [ $? -ne 0 ]; then + echo "kdump: kdump_pre script exited with non-zero status!" + do_final_action + # During systemd service to reboot the machine, stop this shell script running + exit 1 +fi +make_trace_mem "kdump saving vmcore" '1:shortmem' '2+:mem' '3+:slab' +do_dump +DUMP_RETVAL=$? + +do_kdump_post $DUMP_RETVAL +if [ $? -ne 0 ]; then + echo "kdump: kdump_post script exited with non-zero status!" +fi + +if [ $DUMP_RETVAL -ne 0 ]; then + exit 1 +fi + +do_final_action diff --git a/SOURCES/dracut-module-setup.sh b/SOURCES/dracut-module-setup.sh new file mode 100755 index 0000000..32506ad --- /dev/null +++ b/SOURCES/dracut-module-setup.sh @@ -0,0 +1,840 @@ +#!/bin/bash + +. $dracutfunctions +. /lib/kdump/kdump-lib.sh + +if ! [[ -d "${initdir}/tmp" ]]; then + mkdir -p "${initdir}/tmp" +fi + +check() { + [[ $debug ]] && set -x + #kdumpctl sets this explicitly + if [ -z "$IN_KDUMP" ] || [ ! -f /etc/kdump.conf ] + then + return 1 + fi + return 0 +} + +depends() { + local _dep="base shutdown" + + is_squash_available() { + for kmodule in squashfs overlay loop; do + if [ -z "$KDUMP_KERNELVER" ]; then + modprobe --dry-run $kmodule &>/dev/null || return 1 + else + modprobe -S $KDUMP_KERNELVER --dry-run $kmodule &>/dev/null || return 1 + fi + done + } + + if is_squash_available && ! is_fadump_capable; then + _dep="$_dep squash" + else + dwarning "Required modules to build a squashed kdump image is missing!" + fi + + if [ -n "$( find /sys/devices -name drm )" ] || [ -d /sys/module/hyperv_fb ]; then + _dep="$_dep drm" + fi + + if is_generic_fence_kdump || is_pcs_fence_kdump; then + _dep="$_dep network" + fi + + echo $_dep + return 0 +} + +kdump_is_bridge() { + [ -d /sys/class/net/"$1"/bridge ] +} + +kdump_is_bond() { + [ -d /sys/class/net/"$1"/bonding ] +} + +kdump_is_team() { + [ -f /usr/bin/teamnl ] && teamnl $1 ports &> /dev/null +} + +kdump_is_vlan() { + [ -f /proc/net/vlan/"$1" ] +} + +# $1: netdev name +source_ifcfg_file() { + local ifcfg_file + + ifcfg_file=$(get_ifcfg_filename $1) + if [ -f "${ifcfg_file}" ]; then + . ${ifcfg_file} + else + dwarning "The ifcfg file of $1 is not found!" + fi +} + +# $1: netdev name +kdump_setup_dns() { + local _nameserver _dns + local _dnsfile=${initdir}/etc/cmdline.d/42dns.conf + + source_ifcfg_file $1 + + [ -n "$DNS1" ] && echo "nameserver=$DNS1" > "$_dnsfile" + [ -n "$DNS2" ] && echo "nameserver=$DNS2" >> "$_dnsfile" + + while read content; + do + _nameserver=$(echo $content | grep ^nameserver) + [ -z "$_nameserver" ] && continue + + _dns=$(echo $_nameserver | cut -d' ' -f2) + [ -z "$_dns" ] && continue + + if [ ! -f $_dnsfile ] || [ ! $(cat $_dnsfile | grep -q $_dns) ]; then + echo "nameserver=$_dns" >> "$_dnsfile" + fi + done < "/etc/resolv.conf" +} + +#$1: netdev name +#$2: srcaddr +#if it use static ip echo it, or echo null +kdump_static_ip() { + local _netdev="$1" _srcaddr="$2" _ipv6_flag + local _netmask _gateway _ipaddr _target _nexthop + + _ipaddr=$(ip addr show dev $_netdev permanent | awk "/ $_srcaddr\/.* /{print \$2}") + + if is_ipv6_address $_srcaddr; then + _ipv6_flag="-6" + fi + + if [ -n "$_ipaddr" ]; then + _gateway=$(ip $_ipv6_flag route list dev $_netdev | \ + awk '/^default /{print $3}' | head -n 1) + + if [ "x" != "x"$_ipv6_flag ]; then + # _ipaddr="2002::56ff:feb6:56d5/64", _netmask is the number after "/" + _netmask=${_ipaddr#*\/} + _srcaddr="[$_srcaddr]" + _gateway="[$_gateway]" + else + _netmask=$(ipcalc -m $_ipaddr | cut -d'=' -f2) + fi + echo -n "${_srcaddr}::${_gateway}:${_netmask}::" + fi + + /sbin/ip $_ipv6_flag route show | grep -v default | grep ".*via.* $_netdev " |\ + while read _route; do + _target=`echo $_route | cut -d ' ' -f1` + _nexthop=`echo $_route | cut -d ' ' -f3` + if [ "x" != "x"$_ipv6_flag ]; then + _target="[$_target]" + _nexthop="[$_nexthop]" + fi + echo "rd.route=$_target:$_nexthop:$_netdev" + done >> ${initdir}/etc/cmdline.d/45route-static.conf +} + +kdump_get_mac_addr() { + cat /sys/class/net/$1/address +} + +#Bonding or team master modifies the mac address +#of its slaves, we should use perm address +kdump_get_perm_addr() { + local addr=$(ethtool -P $1 | sed -e 's/Permanent address: //') + if [ -z "$addr" ] || [ "$addr" = "00:00:00:00:00:00" ] + then + derror "Can't get the permanent address of $1" + else + echo "$addr" + fi +} + +# Prefix kernel assigned names with "kdump-". EX: eth0 -> kdump-eth0 +# Because kernel assigned names are not persistent between 1st and 2nd +# kernel. We could probably end up with eth0 being eth1, eth0 being +# eth1, and naming conflict happens. +kdump_setup_ifname() { + local _ifname + + # If ifname already has 'kdump-' prefix, we must be switching from + # fadump to kdump. Skip prefixing 'kdump-' in this case as adding + # another prefix may truncate the ifname. Since an ifname with + # 'kdump-' is already persistent, this should be fine. + if [[ $1 =~ eth* ]] && [[ ! $1 =~ ^kdump-* ]]; then + _ifname="kdump-$1" + else + _ifname="$1" + fi + + echo "$_ifname" +} + +kdump_setup_bridge() { + local _netdev=$1 + local _brif _dev _mac _kdumpdev + for _dev in `ls /sys/class/net/$_netdev/brif/`; do + _kdumpdev=$_dev + if kdump_is_bond "$_dev"; then + kdump_setup_bond "$_dev" + elif kdump_is_team "$_dev"; then + kdump_setup_team "$_dev" + elif kdump_is_vlan "$_dev"; then + kdump_setup_vlan "$_dev" + else + _mac=$(kdump_get_mac_addr $_dev) + _kdumpdev=$(kdump_setup_ifname $_dev) + echo -n " ifname=$_kdumpdev:$_mac" >> ${initdir}/etc/cmdline.d/41bridge.conf + fi + _brif+="$_kdumpdev," + done + echo " bridge=$_netdev:$(echo $_brif | sed -e 's/,$//')" >> ${initdir}/etc/cmdline.d/41bridge.conf +} + +kdump_setup_bond() { + local _netdev=$1 + local _dev _mac _slaves _kdumpdev + for _dev in `cat /sys/class/net/$_netdev/bonding/slaves`; do + _mac=$(kdump_get_perm_addr $_dev) + _kdumpdev=$(kdump_setup_ifname $_dev) + echo -n " ifname=$_kdumpdev:$_mac" >> ${initdir}/etc/cmdline.d/42bond.conf + _slaves+="$_kdumpdev," + done + echo -n " bond=$_netdev:$(echo $_slaves | sed 's/,$//')" >> ${initdir}/etc/cmdline.d/42bond.conf + # Get bond options specified in ifcfg + + source_ifcfg_file $_netdev + + bondoptions=":$(echo $BONDING_OPTS | xargs echo | tr " " ",")" + echo "$bondoptions" >> ${initdir}/etc/cmdline.d/42bond.conf +} + +kdump_setup_team() { + local _netdev=$1 + local _dev _mac _slaves _kdumpdev + for _dev in `teamnl $_netdev ports | awk -F':' '{print $2}'`; do + _mac=$(kdump_get_perm_addr $_dev) + _kdumpdev=$(kdump_setup_ifname $_dev) + echo -n " ifname=$_kdumpdev:$_mac" >> ${initdir}/etc/cmdline.d/44team.conf + _slaves+="$_kdumpdev," + done + echo " team=$_netdev:$(echo $_slaves | sed -e 's/,$//')" >> ${initdir}/etc/cmdline.d/44team.conf + #Buggy version teamdctl outputs to stderr! + #Try to use the latest version of teamd. + teamdctl "$_netdev" config dump > ${initdir}/tmp/$$-$_netdev.conf + if [ $? -ne 0 ] + then + derror "teamdctl failed." + exit 1 + fi + inst_dir /etc/teamd + inst_simple ${initdir}/tmp/$$-$_netdev.conf "/etc/teamd/$_netdev.conf" + rm -f ${initdir}/tmp/$$-$_netdev.conf +} + +kdump_setup_vlan() { + local _netdev=$1 + local _phydev="$(awk '/^Device:/{print $2}' /proc/net/vlan/"$_netdev")" + local _netmac="$(kdump_get_mac_addr $_phydev)" + local _kdumpdev + + #Just support vlan over bond, it is not easy + #to support all other complex setup + if kdump_is_bridge "$_phydev"; then + derror "Vlan over bridge is not supported!" + exit 1 + elif kdump_is_team "$_phydev"; then + derror "Vlan over team is not supported!" + exit 1 + elif kdump_is_bond "$_phydev"; then + kdump_setup_bond "$_phydev" + echo " vlan=$(kdump_setup_ifname $_netdev):$_phydev" > ${initdir}/etc/cmdline.d/43vlan.conf + else + _kdumpdev="$(kdump_setup_ifname $_phydev)" + echo " vlan=$(kdump_setup_ifname $_netdev):$_kdumpdev ifname=$_kdumpdev:$_netmac" > ${initdir}/etc/cmdline.d/43vlan.conf + fi +} + +# setup s390 znet cmdline +# $1: netdev name +kdump_setup_znet() { + local _options="" + local _netdev=$1 + + source_ifcfg_file $_netdev + + for i in $OPTIONS; do + _options=${_options},$i + done + echo rd.znet=${NETTYPE},${SUBCHANNELS}${_options} rd.znet_ifname=$_netdev:${SUBCHANNELS} > ${initdir}/etc/cmdline.d/30znet.conf +} + +# Setup dracut to bringup a given network interface +kdump_setup_netdev() { + local _netdev=$1 _srcaddr=$2 + local _static _proto _ip_conf _ip_opts _ifname_opts + local _netmac=$(kdump_get_mac_addr $_netdev) + + if [ "$(uname -m)" = "s390x" ]; then + kdump_setup_znet $_netdev + fi + + _static=$(kdump_static_ip $_netdev $_srcaddr) + if [ -n "$_static" ]; then + _proto=none + elif is_ipv6_address $_srcaddr; then + _proto=either6 + else + _proto=dhcp + fi + + _ip_conf="${initdir}/etc/cmdline.d/40ip.conf" + _ip_opts=" ip=${_static}$(kdump_setup_ifname $_netdev):${_proto}" + + # dracut doesn't allow duplicated configuration for same NIC, even they're exactly the same. + # so we have to avoid adding duplicates + # We should also check /proc/cmdline for existing ip=xx arg. + # For example, iscsi boot will specify ip=xxx arg in cmdline. + if [ ! -f $_ip_conf ] || ! grep -q $_ip_opts $_ip_conf &&\ + ! grep -q "ip=[^[:space:]]*$_netdev" /proc/cmdline; then + echo "$_ip_opts" >> $_ip_conf + fi + + if kdump_is_bridge "$_netdev"; then + kdump_setup_bridge "$_netdev" + elif kdump_is_bond "$_netdev"; then + kdump_setup_bond "$_netdev" + elif kdump_is_team "$_netdev"; then + kdump_setup_team "$_netdev" + elif kdump_is_vlan "$_netdev"; then + kdump_setup_vlan "$_netdev" + else + _ifname_opts=" ifname=$(kdump_setup_ifname $_netdev):$_netmac" + echo "$_ifname_opts" >> $_ip_conf + fi + + kdump_setup_dns "$_netdev" + + if [ ! -f ${initdir}/etc/cmdline.d/50neednet.conf ]; then + # network-manager module needs this parameter + echo "rd.neednet" >> ${initdir}/etc/cmdline.d/50neednet.conf + fi +} + +get_ip_route_field() +{ + if `echo $1 | grep -q $2`; then + echo ${1##*$2} | cut -d ' ' -f1 + fi +} + +#Function:kdump_install_net +#$1: config values of net line in kdump.conf +#$2: srcaddr of network device +kdump_install_net() { + local _server _netdev _srcaddr _route _serv_tmp + local config_val="$1" + + _server=$(get_remote_host $config_val) + + if is_hostname $_server; then + _serv_tmp=`getent ahosts $_server | grep -v : | head -n 1` + if [ -z "$_serv_tmp" ]; then + _serv_tmp=`getent ahosts $_server | head -n 1` + fi + _server=`echo $_serv_tmp | cut -d' ' -f1` + fi + + _route=`/sbin/ip -o route get to $_server 2>&1` + [ $? != 0 ] && echo "Bad kdump location: $config_val" && exit 1 + + #the field in the ip output changes if we go to another subnet + _srcaddr=$(get_ip_route_field "$_route" "src") + _netdev=$(get_ip_route_field "$_route" "dev") + + kdump_setup_netdev "${_netdev}" "${_srcaddr}" + + #save netdev used for kdump as cmdline + # Whoever calling kdump_install_net() is setting up the default gateway, + # ie. bootdev/kdumpnic. So don't override the setting if calling + # kdump_install_net() for another time. For example, after setting eth0 as + # the default gate way for network dump, eth1 in the fence kdump path will + # call kdump_install_net again and we don't want eth1 to be the default + # gateway. + if [ ! -f ${initdir}/etc/cmdline.d/60kdumpnic.conf ] && + [ ! -f ${initdir}/etc/cmdline.d/70bootdev.conf ]; then + echo "kdumpnic=$(kdump_setup_ifname $_netdev)" > ${initdir}/etc/cmdline.d/60kdumpnic.conf + echo "bootdev=$(kdump_setup_ifname $_netdev)" > ${initdir}/etc/cmdline.d/70bootdev.conf + fi +} + +# install etc/kdump/pre.d and /etc/kdump/post.d +kdump_install_pre_post_conf() { + if [ -d /etc/kdump/pre.d ]; then + for file in /etc/kdump/pre.d/*; do + if [ -x "$file" ]; then + dracut_install $file + elif [ $file != "/etc/kdump/pre.d/*" ]; then + echo "$file is not executable" + fi + done + fi + + if [ -d /etc/kdump/post.d ]; then + for file in /etc/kdump/post.d/*; do + if [ -x "$file" ]; then + dracut_install $file + elif [ $file != "/etc/kdump/post.d/*" ]; then + echo "$file is not executable" + fi + done + fi +} + +default_dump_target_install_conf() +{ + local _target _fstype + local _mntpoint _save_path + + is_user_configured_dump_target && return + + _save_path=$(get_bind_mount_source $(get_save_path)) + _target=$(get_target_from_path $_save_path) + _mntpoint=$(get_mntpoint_from_target $_target) + + _fstype=$(get_fs_type_from_target $_target) + if is_fs_type_nfs $_fstype; then + kdump_install_net "$_target" + _fstype="nfs" + else + _target=$(kdump_get_persistent_dev $_target) + fi + + echo "$_fstype $_target" >> ${initdir}/tmp/$$-kdump.conf + + # don't touch the path under root mount + if [ "$_mntpoint" != "/" ]; then + _save_path=${_save_path##"$_mntpoint"} + fi + + #erase the old path line, then insert the parsed path + sed -i "/^path/d" ${initdir}/tmp/$$-kdump.conf + echo "path $_save_path" >> ${initdir}/tmp/$$-kdump.conf +} + +#install kdump.conf and what user specifies in kdump.conf +kdump_install_conf() { + local _opt _val _pdev + sed -ne '/^#/!p' /etc/kdump.conf > ${initdir}/tmp/$$-kdump.conf + + while read _opt _val; + do + # remove inline comments after the end of a directive. + case "$_opt" in + raw) + _pdev=$(persistent_policy="by-id" kdump_get_persistent_dev $_val) + sed -i -e "s#^$_opt[[:space:]]\+$_val#$_opt $_pdev#" ${initdir}/tmp/$$-kdump.conf + ;; + ext[234]|xfs|btrfs|minix) + _pdev=$(kdump_get_persistent_dev $_val) + sed -i -e "s#^$_opt[[:space:]]\+$_val#$_opt $_pdev#" ${initdir}/tmp/$$-kdump.conf + ;; + ssh|nfs) + kdump_install_net "$_val" + ;; + dracut_args) + if [[ $(get_dracut_args_fstype "$_val") = nfs* ]] ; then + kdump_install_net "$(get_dracut_args_target "$_val")" + fi + ;; + kdump_pre|kdump_post|extra_bins) + dracut_install $_val + ;; + core_collector) + dracut_install "${_val%%[[:blank:]]*}" + ;; + esac + done <<< "$(read_strip_comments /etc/kdump.conf)" + + kdump_install_pre_post_conf + + default_dump_target_install_conf + + kdump_configure_fence_kdump "${initdir}/tmp/$$-kdump.conf" + inst "${initdir}/tmp/$$-kdump.conf" "/etc/kdump.conf" + rm -f ${initdir}/tmp/$$-kdump.conf +} + +# Default sysctl parameters should suffice for kdump kernel. +# Remove custom configurations sysctl.conf & sysctl.d/* +remove_sysctl_conf() { + + # As custom configurations like vm.min_free_kbytes can lead + # to OOM issues in kdump kernel, avoid them + rm -f "${initdir}/etc/sysctl.conf" + rm -rf "${initdir}/etc/sysctl.d" + rm -rf "${initdir}/run/sysctl.d" + rm -rf "${initdir}/usr/lib/sysctl.d" +} + +kdump_iscsi_get_rec_val() { + + local result + + # The open-iscsi 742 release changed to using flat files in + # /var/lib/iscsi. + + result=$(/sbin/iscsiadm --show -m session -r ${1} | grep "^${2} = ") + result=${result##* = } + echo $result +} + +kdump_get_iscsi_initiator() { + local _initiator + local initiator_conf="/etc/iscsi/initiatorname.iscsi" + + [ -f "$initiator_conf" ] || return 1 + + while read _initiator; do + [ -z "${_initiator%%#*}" ] && continue # Skip comment lines + + case $_initiator in + InitiatorName=*) + initiator=${_initiator#InitiatorName=} + echo "rd.iscsi.initiator=${initiator}" + return 0;; + *) ;; + esac + done < ${initiator_conf} + + return 1 +} + +# Figure out iBFT session according to session type +is_ibft() { + [ "$(kdump_iscsi_get_rec_val $1 "node.discovery_type")" = fw ] +} + +kdump_setup_iscsi_device() { + local path=$1 + local tgt_name; local tgt_ipaddr; + local username; local password; local userpwd_str; + local username_in; local password_in; local userpwd_in_str; + local netdev + local srcaddr + local idev + local netroot_str ; local initiator_str; + local netroot_conf="${initdir}/etc/cmdline.d/50iscsi.conf" + local initiator_conf="/etc/iscsi/initiatorname.iscsi" + + dinfo "Found iscsi component $1" + + # Check once before getting explicit values, so we can bail out early, + # e.g. in case of pure-hardware(all-offload) iscsi. + if ! /sbin/iscsiadm -m session -r ${path} &>/dev/null ; then + return 1 + fi + + if is_ibft ${path}; then + return + fi + + # Remove software iscsi cmdline generated by 95iscsi, + # and let kdump regenerate here. + rm -f ${initdir}/etc/cmdline.d/95iscsi.conf + + tgt_name=$(kdump_iscsi_get_rec_val ${path} "node.name") + tgt_ipaddr=$(kdump_iscsi_get_rec_val ${path} "node.conn\[0\].address") + + # get and set username and password details + username=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.username") + [ "$username" == "" ] && username="" + password=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.password") + [ "$password" == "" ] && password="" + username_in=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.username_in") + [ -n "$username" ] && userpwd_str="$username:$password" + + # get and set incoming username and password details + [ "$username_in" == "" ] && username_in="" + password_in=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.password_in") + [ "$password_in" == "" ] && password_in="" + + [ -n "$username_in" ] && userpwd_in_str=":$username_in:$password_in" + + netdev=$(/sbin/ip route get to ${tgt_ipaddr} | \ + sed 's|.*dev \(.*\).*|\1|g') + srcaddr=$(echo $netdev | awk '{ print $3; exit }') + netdev=$(echo $netdev | awk '{ print $1; exit }') + + kdump_setup_netdev $netdev $srcaddr + + # prepare netroot= command line + # FIXME: Do we need to parse and set other parameters like protocol, port + # iscsi_iface_name, netdev_name, LUN etc. + + if is_ipv6_address $tgt_ipaddr; then + tgt_ipaddr="[$tgt_ipaddr]" + fi + netroot_str="netroot=iscsi:${userpwd_str}${userpwd_in_str}@$tgt_ipaddr::::$tgt_name" + + [[ -f $netroot_conf ]] || touch $netroot_conf + + # If netroot target does not exist already, append. + if ! grep -q $netroot_str $netroot_conf; then + echo $netroot_str >> $netroot_conf + dinfo "Appended $netroot_str to $netroot_conf" + fi + + # Setup initator + initiator_str=$(kdump_get_iscsi_initiator) + [ $? -ne "0" ] && derror "Failed to get initiator name" && return 1 + + # If initiator details do not exist already, append. + if ! grep -q "$initiator_str" $netroot_conf; then + echo "$initiator_str" >> $netroot_conf + dinfo "Appended "$initiator_str" to $netroot_conf" + fi +} + +kdump_check_iscsi_targets () { + # If our prerequisites are not met, fail anyways. + type -P iscsistart >/dev/null || return 1 + + kdump_check_setup_iscsi() ( + local _dev + _dev=$1 + + [[ -L /sys/dev/block/$_dev ]] || return + cd "$(readlink -f /sys/dev/block/$_dev)" + until [[ -d sys || -d iscsi_session ]]; do + cd .. + done + [[ -d iscsi_session ]] && kdump_setup_iscsi_device "$PWD" + ) + + [[ $hostonly ]] || [[ $mount_needs ]] && { + for_each_host_dev_and_slaves_all kdump_check_setup_iscsi + } +} + +# hostname -a is deprecated, do it by ourself +get_alias() { + local ips + local entries + local alias_set + + ips=$(hostname -I) + for ip in $ips + do + # in /etc/hosts, alias can come at the 2nd column + entries=$(grep $ip /etc/hosts | awk '{ $1=""; print $0 }') + if [ $? -eq 0 ]; then + alias_set="$alias_set $entries" + fi + done + + echo $alias_set +} + +is_localhost() { + local hostnames=$(hostname -A) + local shortnames=$(hostname -A -s) + local aliasname=$(get_alias) + local nodename=$1 + + hostnames="$hostnames $shortnames $aliasname" + + for name in ${hostnames}; do + if [ "$name" == "$nodename" ]; then + return 0 + fi + done + return 1 +} + +# retrieves fence_kdump nodes from Pacemaker cluster configuration +get_pcs_fence_kdump_nodes() { + local nodes + + # get cluster nodes from cluster cib, get interface and ip address + nodelist=`pcs cluster cib | xmllint --xpath "/cib/status/node_state/@uname" -` + + # nodelist is formed as 'uname="node1" uname="node2" ... uname="nodeX"' + # we need to convert each to node1, node2 ... nodeX in each iteration + for node in ${nodelist}; do + # convert $node from 'uname="nodeX"' to 'nodeX' + eval $node + nodename=$uname + # Skip its own node name + if [ "$nodename" = `hostname` -o "$nodename" = `hostname -s` ]; then + continue + fi + nodes="$nodes $nodename" + done + + echo $nodes +} + +# retrieves fence_kdump args from config file +get_pcs_fence_kdump_args() { + if [ -f $FENCE_KDUMP_CONFIG_FILE ]; then + . $FENCE_KDUMP_CONFIG_FILE + echo $FENCE_KDUMP_OPTS + fi +} + +get_generic_fence_kdump_nodes() { + local filtered + local nodes + + nodes=$(get_option_value "fence_kdump_nodes") + for node in ${nodes}; do + # Skip its own node name + if is_localhost $node; then + continue + fi + filtered="$filtered $node" + done + echo $filtered +} + +# setup fence_kdump in cluster +# setup proper network and install needed files +kdump_configure_fence_kdump () { + local kdump_cfg_file=$1 + local nodes + local args + + if is_generic_fence_kdump; then + nodes=$(get_generic_fence_kdump_nodes) + + elif is_pcs_fence_kdump; then + nodes=$(get_pcs_fence_kdump_nodes) + + # set appropriate options in kdump.conf + echo "fence_kdump_nodes $nodes" >> ${kdump_cfg_file} + + args=$(get_pcs_fence_kdump_args) + if [ -n "$args" ]; then + echo "fence_kdump_args $args" >> ${kdump_cfg_file} + fi + + else + # fence_kdump not configured + return 1 + fi + + # setup network for each node + for node in ${nodes}; do + kdump_install_net $node + done + + dracut_install /etc/hosts + dracut_install /etc/nsswitch.conf + dracut_install $FENCE_KDUMP_SEND +} + +# Install a random seed used to feed /dev/urandom +# By the time kdump service starts, /dev/uramdom is already fed by systemd +kdump_install_random_seed() { + local poolsize=`cat /proc/sys/kernel/random/poolsize` + + if [ ! -d ${initdir}/var/lib/ ]; then + mkdir -p ${initdir}/var/lib/ + fi + + dd if=/dev/urandom of=${initdir}/var/lib/random-seed \ + bs=$poolsize count=1 2> /dev/null +} + +remove_cpu_online_rule() { + local file=${initdir}/usr/lib/udev/rules.d/40-redhat.rules + + sed -i '/SUBSYSTEM=="cpu"/d' $file +} + +install() { + local arch + + kdump_install_conf + remove_sysctl_conf + + # Onlining secondary cpus breaks kdump completely on KVM on Power hosts + # Though we use maxcpus=1 by default but 40-redhat.rules will bring up all + # possible cpus by default. (rhbz1270174 rhbz1266322) + # Thus before we get the kernel fix and the systemd rule fix let's remove + # the cpu online rule in kdump initramfs. + arch=$(uname -m) + if [[ "$arch" = "ppc64le" ]] || [[ "$arch" = "ppc64" ]]; then + remove_cpu_online_rule + fi + + if is_ssh_dump_target; then + kdump_install_random_seed + fi + dracut_install -o /etc/adjtime /etc/localtime + inst "$moddir/monitor_dd_progress" "/kdumpscripts/monitor_dd_progress" + chmod +x ${initdir}/kdumpscripts/monitor_dd_progress + inst "/bin/dd" "/bin/dd" + inst "/bin/tail" "/bin/tail" + inst "/bin/date" "/bin/date" + inst "/bin/sync" "/bin/sync" + inst "/bin/cut" "/bin/cut" + inst "/bin/head" "/bin/head" + inst "/sbin/makedumpfile" "/sbin/makedumpfile" + inst "/sbin/vmcore-dmesg" "/sbin/vmcore-dmesg" + inst "/lib/kdump/kdump-lib.sh" "/lib/kdump-lib.sh" + inst "/lib/kdump/kdump-lib-initramfs.sh" "/lib/kdump-lib-initramfs.sh" + inst "$moddir/kdump.sh" "/usr/bin/kdump.sh" + inst "$moddir/kdump-capture.service" "$systemdsystemunitdir/kdump-capture.service" + ln_r "$systemdsystemunitdir/kdump-capture.service" "$systemdsystemunitdir/initrd.target.wants/kdump-capture.service" + inst "$moddir/kdump-error-handler.sh" "/usr/bin/kdump-error-handler.sh" + inst "$moddir/kdump-error-handler.service" "$systemdsystemunitdir/kdump-error-handler.service" + # Replace existing emergency service and emergency target + cp "$moddir/kdump-emergency.service" "$initdir/$systemdsystemunitdir/emergency.service" + cp "$moddir/kdump-emergency.target" "$initdir/$systemdsystemunitdir/emergency.target" + # Also redirect dracut-emergency to kdump error handler + ln_r "$systemdsystemunitdir/emergency.service" "$systemdsystemunitdir/dracut-emergency.service" + + # Check for all the devices and if any device is iscsi, bring up iscsi + # target. Ideally all this should be pushed into dracut iscsi module + # at some point of time. + kdump_check_iscsi_targets + + # For the lvm type target under kdump, in /etc/lvm/lvm.conf we can + # safely replace "reserved_memory=XXXX"(default value is 8192) with + # "reserved_memory=1024" to lower memory pressure under kdump. We do + # it unconditionally here, if "/etc/lvm/lvm.conf" doesn't exist, it + # actually does nothing. + sed -i -e \ + 's/\(^[[:space:]]*reserved_memory[[:space:]]*=\)[[:space:]]*[[:digit:]]*/\1 1024/' \ + ${initdir}/etc/lvm/lvm.conf &>/dev/null + + # Kdump turns out to require longer default systemd mount timeout + # than 1st kernel(90s by default), we use default 300s for kdump. + grep -r "^[[:space:]]*DefaultTimeoutStartSec=" ${initdir}/etc/systemd/system.conf* &>/dev/null + if [ $? -ne 0 ]; then + mkdir -p ${initdir}/etc/systemd/system.conf.d + echo "[Manager]" > ${initdir}/etc/systemd/system.conf.d/kdump.conf + echo "DefaultTimeoutStartSec=300s" >> ${initdir}/etc/systemd/system.conf.d/kdump.conf + fi + + if ! is_fadump_capable; then + # Forward logs to console directly, this avoids unneccessary memory + # consumption and make console output more useful. + # Only do so for non fadump image. + mkdir -p ${initdir}/etc/systemd/journald.conf.d + echo "[Journal]" > ${initdir}/etc/systemd/journald.conf.d/kdump.conf + echo "Storage=none" >> ${initdir}/etc/systemd/journald.conf.d/kdump.conf + echo "ForwardToConsole=yes" >> ${initdir}/etc/systemd/journald.conf.d/kdump.conf + + # Save more memory by dropping switch root capability + dracut_no_switch_root + fi +} diff --git a/SOURCES/dracut-monitor_dd_progress b/SOURCES/dracut-monitor_dd_progress new file mode 100644 index 0000000..e139d33 --- /dev/null +++ b/SOURCES/dracut-monitor_dd_progress @@ -0,0 +1,28 @@ +#!/bin/sh + +SRC_FILE_MB=$1 + +while true +do + DD_PID=`pidof dd` + if [ -n "$DD_PID" ]; then + break + fi +done + +while true +do + sleep 5 + if [ ! -d /proc/$DD_PID ]; then + break + fi + + kill -s USR1 $DD_PID + CURRENT_SIZE=`tail -n 1 /tmp/dd_progress_file | sed "s/[^0-9].*//g"` + [ -n "$CURRENT_SIZE" ] && { + CURRENT_MB=$(($CURRENT_SIZE / 1048576)) + echo -e "Copied $CURRENT_MB MB / $SRC_FILE_MB MB\r" + } +done + +rm -f /tmp/dd_progress_file diff --git a/SOURCES/early-kdump-howto.txt b/SOURCES/early-kdump-howto.txt new file mode 100644 index 0000000..68b23c7 --- /dev/null +++ b/SOURCES/early-kdump-howto.txt @@ -0,0 +1,95 @@ +Early Kdump HOWTO + +Introduction +------------ + +Early kdump is a mechanism to make kdump operational earlier than normal kdump +service. The kdump service starts early enough for general crash cases, but +there are some cases where it has no chance to make kdump operational in boot +sequence, such as detecting devices and starting early services. If you hit +such a case, early kdump may allow you to get more information of it. + +Early kdump is implemented as a dracut module. It adds a kernel (vmlinuz) and +initramfs for kdump to your system's initramfs in order to load them as early +as possible. After that, if you provide "rd.earlykdump" in kernel command line, +then in the initramfs, early kdump will load those files like the normal kdump +service. This is disabled by default. + +For the normal kdump service, it can check whether the early kdump has loaded +the crash kernel and initramfs. It has no conflict with the early kdump. + +How to configure early kdump +---------------------------- + +We assume if you're reading this document, you should already have kexec-tools +installed. + +You can rebuild the initramfs with earlykdump support with below steps: + +1. start kdump service to make sure kdump initramfs is created. + + # systemctl start kdump + + NOTE: If a crash occurs during boot process, early kdump captures a vmcore + and reboot the system by default, so the system might go into crash loop. + You can avoid such a crash loop by adding the following settings, which + power off the system after dump capturing, to kdump.conf in advance: + + final_action poweroff + failure_action poweroff + + For the failure_action, you can choose anything other than "reboot". + +2. rebuild system initramfs with earlykdump support. + + # dracut --force --add earlykdump + + NOTE: Recommend to backup the original system initramfs before performing + this step to put it back if something happens during boot-up. + +3. add rd.earlykdump in grub kernel command line. + +After making said changes, reboot your system to take effect. Of course, if you +want to disable early kdump, you can simply remove "rd.earlykdump" from kernel +boot parameters in grub, and reboot system like above. + +Once the boot is completed, you can check the status of the early kdump support +on the command prompt: + + # journalctl -b | grep early-kdump + +Then, you will see some useful logs, for example: + +- if early kdump is successful. + +Mar 09 09:57:56 localhost dracut-cmdline[190]: early-kdump is enabled. +Mar 09 09:57:56 localhost dracut-cmdline[190]: kexec: loaded early-kdump kernel + +- if early kdump is disabled. + +Mar 09 10:02:47 localhost dracut-cmdline[189]: early-kdump is disabled. + +Notes +----- + +- The size of early kdump initramfs will be large because it includes vmlinuz + and kdump initramfs. + +- Early kdump inherits the settings of normal kdump, so any changes that + caused normal kdump rebuilding also require rebuilding the system initramfs + to make sure that the changes take effect for early kdump. Therefore, after + the rebuilding of kdump initramfs is completed, provide a prompt message to + tell the fact. + +- If you install an updated kernel and reboot the system with it, the early + kdump will be disabled by default. To enable it with the new kernel, you + need to take the above steps again. + +Limitation +---------- + +- At present, early kdump doesn't support fadump. + +- Early kdump loads a crash kernel and initramfs at the beginning of the + process in system's initramfs, so a crash at earlier than that (e.g. in + kernel initialization) cannot be captured even with the early kdump. diff --git a/SOURCES/fadump-howto.txt b/SOURCES/fadump-howto.txt new file mode 100644 index 0000000..c891e37 --- /dev/null +++ b/SOURCES/fadump-howto.txt @@ -0,0 +1,338 @@ +Firmware assisted dump (fadump) HOWTO + +Introduction + +Firmware assisted dump is a new feature in the 3.4 mainline kernel supported +only on powerpc architecture. The goal of firmware-assisted dump is to enable +the dump of a crashed system, and to do so from a fully-reset system, and to +minimize the total elapsed time until the system is back in production use. A +complete documentation on implementation can be found at +Documentation/powerpc/firmware-assisted-dump.txt in upstream linux kernel tree +from 3.4 version and above. + +Please note that the firmware-assisted dump feature is only available on Power6 +and above systems with recent firmware versions. + +Overview + +Fadump + +Fadump is a robust kernel crash dumping mechanism to get reliable kernel crash +dump with assistance from firmware. This approach does not use kexec, instead +firmware assists in booting the kdump kernel while preserving memory contents. +Unlike kdump, the system is fully reset, and loaded with a fresh copy of the +kernel. In particular, PCI and I/O devices are reinitialized and are in a +clean, consistent state. This second kernel, often called a capture kernel, +boots with very little memory and captures the dump image. + +The first kernel registers the sections of memory with the Power firmware for +dump preservation during OS initialization. These registered sections of memory +are reserved by the first kernel during early boot. When a system crashes, the +Power firmware fully resets the system, preserves all the system memory +contents, save the low memory (boot memory of size larger of 5% of system +RAM or 256MB) of RAM to the previous registered region. It will also save +system registers, and hardware PTE's. + +Fadump is supported only on ppc64 platform. The standard kernel and capture +kernel are one and the same on ppc64. + +If you're reading this document, you should already have kexec-tools +installed. If not, you install it via the following command: + + # yum install kexec-tools + +Fadump Operational Flow: + +Like kdump, fadump also exports the ELF formatted kernel crash dump through +/proc/vmcore. Hence existing kdump infrastructure can be used to capture fadump +vmcore. The idea is to keep the functionality transparent to end user. From +user perspective there is no change in the way kdump init script works. + +However, unlike kdump, fadump does not pre-load kdump kernel and initrd into +reserved memory, instead it always uses default OS initrd during second boot +after crash. Hence, for fadump, we rebuild the new kdump initrd and replace it +with default initrd. Before replacing existing default initrd we take a backup +of original default initrd for user's reference. The dracut package has been +enhanced to rebuild the default initrd with vmcore capture steps. The initrd +image is rebuilt as per the configuration in /etc/kdump.conf file. + +The control flow of fadump works as follows: +01. System panics. +02. At the crash, kernel informs power firmware that kernel has crashed. +03. Firmware takes the control and reboots the entire system preserving + only the memory (resets all other devices). +04. The reboot follows the normal booting process (non-kexec). +05. The boot loader loads the default kernel and initrd from /boot +06. The default initrd loads and runs /init +07. dracut-kdump.sh script present in fadump aware default initrd checks if + '/proc/device-tree/rtas/ibm,kernel-dump' file exists before executing + steps to capture vmcore. + (This check will help to bypass the vmcore capture steps during normal boot + process.) +09. Captures dump according to /etc/kdump.conf +10. Is dump capture successful (yes goto 12, no goto 11) +11. Perform the failure action specified in /etc/kdump.conf + (The default failure action is reboot, if unspecified) +12. Perform the final action specified in /etc/kdump.conf + (The default final action is reboot, if unspecified) + + +How to configure fadump: + +Again, we assume if you're reading this document, you should already have +kexec-tools installed. If not, you install it via the following command: + + # yum install kexec-tools + +Make the kernel to be configured with FADump as the default boot entry, if +it isn't already: + + # grubby --set-default=/boot/vmlinuz- + +Boot into the kernel to be configured for FADump. To be able to do much of +anything interesting in the way of debug analysis, you'll also need to install +the kernel-debuginfo package, of the same arch as your running kernel, and the +crash utility: + + # yum --enablerepo=\*debuginfo install kernel-debuginfo.$(uname -m) crash + +Next up, we need to modify some boot parameters to enable firmware assisted +dump. With the help of grubby, it's very easy to append "fadump=on" to the end +of your kernel boot parameters. To reserve the appropriate amount of memory +for boot memory preservation, pass 'crashkernel=X' kernel cmdline parameter. +For the recommended value of X, see 'FADump Memory Requirements' section. + + # grubby --args="fadump=on crashkernel=6G" --update-kernel=/boot/vmlinuz-`uname -r` + +The term 'boot memory' means size of the low memory chunk that is required for +a kernel to boot successfully when booted with restricted memory. By default, +the boot memory size will be the larger of 5% of system RAM or 256MB. +Alternatively, user can also specify boot memory size through boot parameter +'fadump_reserve_mem=' which will override the default calculated size. Use this +option if default boot memory size is not sufficient for second kernel to boot +successfully. + +After making said changes, reboot your system, so that the specified memory is +reserved and left untouched by the normal system. Take note that the output of +'free -m' will show X MB less memory than without this parameter, which is +expected. If you see OOM (Out Of Memory) error messages while loading capture +kernel, then you should bump up the memory reservation size. + +Now that you've got that reserved memory region set up, you want to turn on +the kdump init script: + + # systemctl enable kdump.service + +Then, start up kdump as well: + + # systemctl start kdump.service + +This should turn on the firmware assisted functionality in kernel by +echo'ing 1 to /sys/kernel/fadump_registered, leaving the system ready +to capture a vmcore upon crashing. For journaling filesystems like XFS an +additional step is required to ensure bootloader does not pick the +older initrd (without vmcore capture scripts): + + * If /boot is a separate partition, run the below commands as the root user, + or as a user with CAP_SYS_ADMIN rights: + + # fsfreeze -f + # fsfreeze -u + + * If /boot is not a separate partition, reboot the system. + +After reboot check if the kdump service is up and running with: + + # systemctl status kdump.service + +To test out whether FADump is configured properly, you can force-crash your +system by echo'ing a 'c' into /proc/sysrq-trigger: + + # echo c > /proc/sysrq-trigger + +You should see some panic output, followed by the system reset and booting into +fresh copy of kernel. When default initrd loads and runs /init, vmcore should +be copied out to disk (by default, in /var/crash//vmcore), +then the system rebooted back into your normal kernel. + +Once back to your normal kernel, you can use the previously installed crash +kernel in conjunction with the previously installed kernel-debuginfo to +perform postmortem analysis: + + # crash /usr/lib/debug/lib/modules/2.6.17-1.2621.el5/vmlinux + /var/crash/2006-08-23-15:34/vmcore + + crash> bt + +and so on... + +Saving vmcore-dmesg.txt +----------------------- +Kernel log bufferes are one of the most important information available +in vmcore. Now before saving vmcore, kernel log bufferes are extracted +from /proc/vmcore and saved into a file vmcore-dmesg.txt. After +vmcore-dmesg.txt, vmcore is saved. Destination disk and directory for +vmcore-dmesg.txt is same as vmcore. Note that kernel log buffers will +not be available if dump target is raw device. + +FADump Memory Requirements: + + System Memory Recommended memory +--------------------- ---------------------- + 4 GB - 16 GB : 768 MB + 16 GB - 64 GB : 1024 MB + 64 GB - 128 GB : 2 GB + 128 GB - 1 TB : 4 GB + 1 TB - 2 TB : 6 GB + 2 TB - 4 TB : 12 GB + 4 TB - 8 TB : 20 GB + 8 TB - 16 TB : 36 GB + 16 TB - 32 TB : 64 GB + 32 TB - 64 TB : 128 GB + 64 TB & above : 180 GB + +Things to remember: + +1) The memory required to boot capture Kernel is a moving target that depends + on many factors like hardware attached to the system, kernel and modules in + use, packages installed and services enabled, there is no one-size-fits-all. + But the above recommendations are based on system memory. So, the above + recommendations for FADump come with a few assumptions, based on available + system memory, about the resources the system could have. So, please take + the recommendations with a pinch of salt and remember to try capturing dump + a few times to confirm that the system is configured successfully with dump + capturing support. + +2) Though the memory requirements for FADump seem high, this memory is not + completely set aside but made available for userspace applications to use, + through the CMA allocator. + +3) As the same initrd is used for booting production kernel as well as capture + kernel and with dump being captured in a restricted memory environment, few + optimizations (like not inclding network dracut module, disabling multipath + and such) are applied while building the initrd. In case, the production + environment needs these optimizations to be avoided, dracut_args option in + /etc/kdump.conf file could be leveraged. For example, if a user wishes for + network module to be included in the initrd, adding the below entry in + /etc/kdump.conf file and restarting kdump service would take care of it. + + dracut_args --add "network" + +4) If FADump is configured to capture vmcore to a remote dump target using SSH + or NFS protocol, the network interface is renamed to kdump- + if is generic, for example, *eth#, or net#. This problem + occurs because the vmcore capture scripts in the initial RAM disk (initrd) + add the kdump- prefix to the network interface name to secure persistent + naming. As the same initrd is used for production kernel boot, the interface + name is changed for the production kernel too. + +Dump Triggering methods: + +This section talks about the various ways, other than a Kernel Panic, in which +fadump can be triggered. The following methods assume that fadump is configured +on your system, with the scripts enabled as described in the section above. + +1) AltSysRq C + +FAdump can be triggered with the combination of the 'Alt','SysRq' and 'C' +keyboard keys. Please refer to the following link for more details: + +https://fedoraproject.org/wiki/QA/Sysrq + +In addition, on PowerPC boxes, fadump can also be triggered via Hardware +Management Console(HMC) using 'Ctrl', 'O' and 'C' keyboard keys. + +2) Kernel OOPs + +If we want to generate a dump everytime the Kernel OOPses, we can achieve this +by setting the 'Panic On OOPs' option as follows: + + # echo 1 > /proc/sys/kernel/panic_on_oops + +3) PowerPC specific methods: + +On IBM PowerPC machines, issuing a soft reset invokes the XMON debugger(if +XMON is configured). To configure XMON one needs to compile the kernel with +the CONFIG_XMON and CONFIG_XMON_DEFAULT options, or by compiling with +CONFIG_XMON and booting the kernel with xmon=on option. + +Following are the ways to remotely issue a soft reset on PowerPC boxes, which +would drop you to XMON. Pressing a 'X' (capital alphabet X) followed by an +'Enter' here will trigger the dump. + +3.1) HMC + +Hardware Management Console(HMC) available on Power4 and Power5 machines allow +partitions to be reset remotely. This is specially useful in hang situations +where the system is not accepting any keyboard inputs. + +Once you have HMC configured, the following steps will enable you to trigger +fadump via a soft reset: + +On Power4 + Using GUI + + * In the right pane, right click on the partition you wish to dump. + * Select "Operating System->Reset". + * Select "Soft Reset". + * Select "Yes". + + Using HMC Commandline + + # reset_partition -m -p -t soft + +On Power5 + Using GUI + + * In the right pane, right click on the partition you wish to dump. + * Select "Restart Partition". + * Select "Dump". + * Select "OK". + + Using HMC Commandline + + # chsysstate -m -n -o dumprestart -r lpar + +3.2) Blade Management Console for Blade Center + +To initiate a dump operation, go to Power/Restart option under "Blade Tasks" in +the Blade Management Console. Select the corresponding blade for which you want +to initate the dump and then click "Restart blade with NMI". This issues a +system reset and invokes xmon debugger. + + +Advanced Setups & Failure action: + +Kdump and fadump exhibit similar behavior in terms of setup & failure action. +For fadump advanced setup related information see section "Advanced Setups" in +"kexec-kdump-howto.txt" document. Refer to "Failure action" section in "kexec- +kdump-howto.txt" document for fadump failure action related information. + +Compression and filtering + +Refer "Compression and filtering" section in "kexec-kdump-howto.txt" document. +Compression and filtering are same for kdump & fadump. + + +Notes on rootfs mount: +Dracut is designed to mount rootfs by default. If rootfs mounting fails it +will refuse to go on. So fadump leaves rootfs mounting to dracut currently. +We make the assumtion that proper root= cmdline is being passed to dracut +initramfs for the time being. If you need modify "KDUMP_COMMANDLINE=" in +/etc/sysconfig/kdump, you will need to make sure that appropriate root= +options are copied from /proc/cmdline. In general it is best to append +command line options using "KDUMP_COMMANDLINE_APPEND=" instead of replacing +the original command line completely. + +How to disable FADump: + +Remove "fadump=on" from kernel cmdline parameters: + + # grubby --update-kernel=/boot/vmlinuz-`uname -r` --remove-args="fadump=on" + +If KDump is to be used as the dump capturing mechanism, update the crashkernel +parameter (Else, remove "crashkernel=" parameter too, using grubby): + + # grubby --update-kernel=/boot/vmlinuz-$kver --args="crashkernl=auto" + +Reboot the system for the settings to take effect. diff --git a/SOURCES/kdump-dep-generator.sh b/SOURCES/kdump-dep-generator.sh new file mode 100644 index 0000000..b6fab2d --- /dev/null +++ b/SOURCES/kdump-dep-generator.sh @@ -0,0 +1,22 @@ +#!/bin/sh + +# More details about systemd generator: +# http://www.freedesktop.org/wiki/Software/systemd/Generators/ + +. /usr/lib/kdump/kdump-lib.sh + +# If invokded with no arguments for testing purpose, output to /tmp to +# avoid overriding the existing. +dest_dir="/tmp" + +if [ -n "$1" ]; then + dest_dir=$1 +fi + +systemd_dir=/usr/lib/systemd/system +kdump_wants=$dest_dir/kdump.service.wants + +if is_ssh_dump_target; then + mkdir -p $kdump_wants + ln -sf $systemd_dir/network-online.target $kdump_wants/ +fi diff --git a/SOURCES/kdump-in-cluster-environment.txt b/SOURCES/kdump-in-cluster-environment.txt new file mode 100644 index 0000000..de1eb5e --- /dev/null +++ b/SOURCES/kdump-in-cluster-environment.txt @@ -0,0 +1,91 @@ +Kdump-in-cluster-environment HOWTO + +Introduction + +Kdump is a kexec based crash dumping mechansim for Linux. This docuement +illustrate how to configure kdump in cluster environment to allow the kdump +crash recovery service complete without being preempted by traditional power +fencing methods. + +Overview + +Kexec/Kdump + +Details about Kexec/Kdump are available in Kexec-Kdump-howto file and will not +be described here. + +fence_kdump + +fence_kdump is an I/O fencing agent to be used with the kdump crash recovery +service. When the fence_kdump agent is invoked, it will listen for a message +from the failed node that acknowledges that the failed node is executing the +kdump crash kernel. Note that fence_kdump is not a replacement for traditional +fencing methods. The fence_kdump agent can only detect that a node has entered +the kdump crash recovery service. This allows the kdump crash recovery service +complete without being preempted by traditional power fencing methods. + +fence_kdump_send + +fence_kdump_send is a utility used to send messages that acknowledge that the +node itself has entered the kdump crash recovery service. The fence_kdump_send +utility is typically run in the kdump kernel after a cluster node has +encountered a kernel panic. Once the cluster node has entered the kdump crash +recovery service, fence_kdump_send will periodically send messages to all +cluster nodes. When the fence_kdump agent receives a valid message from the +failed nodes, fencing is complete. + +How to configure Pacemaker cluster environment: + +If we want to use kdump in Pacemaker cluster environment, fence-agents-kdump +should be installed in every nodes in the cluster. You can achieve this via +the following command: + + # yum install -y fence-agents-kdump + +Next is to add kdump_fence to the cluster. Assuming that the cluster consists +of three nodes, they are node1, node2 and node3, and use Pacemaker to perform +resource management and pcs as cli configuration tool. + +With pcs it is easy to add a stonith resource to the cluster. For example, add +a stonith resource named mykdumpfence with fence type of fence_kdump via the +following commands: + + # pcs stonith create mykdumpfence fence_kdump \ + pcmk_host_check=static-list pcmk_host_list="node1 node2 node3" + # pcs stonith update mykdumpfence pcmk_monitor_action=metadata --force + # pcs stonith update mykdumpfence pcmk_status_action=metadata --force + # pcs stonith update mykdumpfence pcmk_reboot_action=off --force + +Then enable stonith + # pcs property set stonith-enabled=true + +How to configure kdump: + +Actually there are two ways how to configure fence_kdump support: + +1) Pacemaker based clusters + If you have successfully configured fence_kdump in Pacemaker, there is + no need to add some special configuration in kdump. So please refer to + Kexec-Kdump-howto file for more information. + +2) Generic clusters + For other types of clusters there are two configuration options in + kdump.conf which enables fence_kdump support: + + fence_kdump_nodes + Contains list of cluster node(s) separated by space to send + fence_kdump notification to (this option is mandatory to enable + fence_kdump) + + fence_kdump_args + Command line arguments for fence_kdump_send (it can contain + all valid arguments except hosts to send notification to) + + These options will most probably be configured by your cluster software, + so please refer to your cluster documentation how to enable fence_kdump + support. + +Please be aware that these two ways cannot be combined and 2) has precedence +over 1). It means that if fence_kdump is configured using fence_kdump_nodes +and fence_kdump_args options in kdump.conf, Pacemaker configuration is not +used even if it exists. diff --git a/SOURCES/kdump-lib-initramfs.sh b/SOURCES/kdump-lib-initramfs.sh new file mode 100755 index 0000000..2a7b613 --- /dev/null +++ b/SOURCES/kdump-lib-initramfs.sh @@ -0,0 +1,214 @@ +# These variables and functions are useful in 2nd kernel + +. /lib/kdump-lib.sh + +KDUMP_PATH="/var/crash" +CORE_COLLECTOR="" +DEFAULT_CORE_COLLECTOR="makedumpfile -l --message-level 1 -d 31" +DMESG_COLLECTOR="/sbin/vmcore-dmesg" +FAILURE_ACTION="systemctl reboot -f" +DATEDIR=`date +%Y-%m-%d-%T` +HOST_IP='127.0.0.1' +DUMP_INSTRUCTION="" +SSH_KEY_LOCATION="/root/.ssh/kdump_id_rsa" +KDUMP_SCRIPT_DIR="/kdumpscripts" +DD_BLKSIZE=512 +FINAL_ACTION="systemctl reboot -f" +KDUMP_CONF="/etc/kdump.conf" +KDUMP_PRE="" +KDUMP_POST="" +NEWROOT="/sysroot" +OPALCORE="/sys/firmware/opal/mpipl/core" + +get_kdump_confs() +{ + local config_opt config_val + + while read config_opt config_val; + do + # remove inline comments after the end of a directive. + case "$config_opt" in + path) + KDUMP_PATH="$config_val" + ;; + core_collector) + [ -n "$config_val" ] && CORE_COLLECTOR="$config_val" + ;; + sshkey) + if [ -f "$config_val" ]; then + SSH_KEY_LOCATION=$config_val + fi + ;; + kdump_pre) + KDUMP_PRE="$config_val" + ;; + kdump_post) + KDUMP_POST="$config_val" + ;; + fence_kdump_args) + FENCE_KDUMP_ARGS="$config_val" + ;; + fence_kdump_nodes) + FENCE_KDUMP_NODES="$config_val" + ;; + failure_action|default) + case $config_val in + shell) + FAILURE_ACTION="kdump_emergency_shell" + ;; + reboot) + FAILURE_ACTION="systemctl reboot -f && exit" + ;; + halt) + FAILURE_ACTION="halt && exit" + ;; + poweroff) + FAILURE_ACTION="systemctl poweroff -f && exit" + ;; + dump_to_rootfs) + FAILURE_ACTION="dump_to_rootfs" + ;; + esac + ;; + final_action) + case $config_val in + reboot) + FINAL_ACTION="systemctl reboot -f" + ;; + halt) + FINAL_ACTION="halt" + ;; + poweroff) + FINAL_ACTION="systemctl poweroff -f" + ;; + esac + ;; + esac + done <<< "$(read_strip_comments $KDUMP_CONF)" + + if [ -z "$CORE_COLLECTOR" ]; then + CORE_COLLECTOR="$DEFAULT_CORE_COLLECTOR" + if is_ssh_dump_target || is_raw_dump_target; then + CORE_COLLECTOR="$CORE_COLLECTOR -F" + fi + fi +} + +# dump_fs +dump_fs() +{ + local _mp=$1 + local _dev=$(get_mount_info SOURCE target $_mp -f) + local _op=$(get_mount_info OPTIONS target $_mp -f) + + # If dump path have a corresponding device entry but not mounted, mount it. + if [ -n "$_dev" ] || [ "$_dev" == "rootfs" ]; then + if ! is_mounted "$_mp"; then + echo "kdump: dump target $_dev is not mounted, trying to mount..." + mkdir -p $_mp + mount -o $_op $_dev $_mp + + if [ $? -ne 0 ]; then + echo "kdump: mounting failed (mount point: $_mp, option: $_op)" + return 1 + fi + fi + else + echo "kdump: failed to dump to \"$_mp\", it's not a mount point!" + return 1 + fi + + # Remove -F in makedumpfile case. We don't want a flat format dump here. + [[ $CORE_COLLECTOR = *makedumpfile* ]] && CORE_COLLECTOR=`echo $CORE_COLLECTOR | sed -e "s/-F//g"` + + echo "kdump: saving to $_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/" + + mount -o remount,rw $_mp || return 1 + mkdir -p $_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR || return 1 + + save_vmcore_dmesg_fs ${DMESG_COLLECTOR} "$_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/" + save_opalcore_fs "$_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/" + + echo "kdump: saving vmcore" + $CORE_COLLECTOR /proc/vmcore $_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/vmcore-incomplete || return 1 + mv $_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/vmcore-incomplete $_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/vmcore + sync + + echo "kdump: saving vmcore complete" + + # improper kernel cmdline can cause the failure of echo, we can ignore this kind of failure + return 0 +} + +save_vmcore_dmesg_fs() { + local _dmesg_collector=$1 + local _path=$2 + + echo "kdump: saving vmcore-dmesg.txt" + $_dmesg_collector /proc/vmcore > ${_path}/vmcore-dmesg-incomplete.txt + _exitcode=$? + if [ $_exitcode -eq 0 ]; then + mv ${_path}/vmcore-dmesg-incomplete.txt ${_path}/vmcore-dmesg.txt + + # Make sure file is on disk. There have been instances where later + # saving vmcore failed and system rebooted without sync and there + # was no vmcore-dmesg.txt available. + sync + echo "kdump: saving vmcore-dmesg.txt complete" + else + echo "kdump: saving vmcore-dmesg.txt failed" + fi +} + +save_opalcore_fs() { + local _path=$1 + + if [ ! -f $OPALCORE ]; then + # Check if we are on an old kernel that uses a different path + if [ -f /sys/firmware/opal/core ]; then + OPALCORE="/sys/firmware/opal/core" + else + return 0 + fi + fi + + echo "kdump: saving opalcore" + cp $OPALCORE ${_path}/opalcore + if [ $? -ne 0 ]; then + echo "kdump: saving opalcore failed" + return 1 + fi + + sync + echo "kdump: saving opalcore complete" + return 0 +} + +dump_to_rootfs() +{ + + echo "Kdump: trying to bring up rootfs device" + systemctl start dracut-initqueue + echo "Kdump: waiting for rootfs mount, will timeout after 90 seconds" + systemctl start sysroot.mount + + dump_fs $NEWROOT +} + +kdump_emergency_shell() +{ + echo "PS1=\"kdump:\\\${PWD}# \"" >/etc/profile + /bin/dracut-emergency + rm -f /etc/profile +} + +do_failure_action() +{ + echo "Kdump: Executing failure action $FAILURE_ACTION" + eval $FAILURE_ACTION +} + +do_final_action() +{ + eval $FINAL_ACTION +} diff --git a/SOURCES/kdump-lib.sh b/SOURCES/kdump-lib.sh new file mode 100755 index 0000000..9f70bdd --- /dev/null +++ b/SOURCES/kdump-lib.sh @@ -0,0 +1,745 @@ +#!/bin/sh +# +# Kdump common variables and functions +# + +DEFAULT_PATH="/var/crash/" +FENCE_KDUMP_CONFIG_FILE="/etc/sysconfig/fence_kdump" +FENCE_KDUMP_SEND="/usr/libexec/fence_kdump_send" +FADUMP_ENABLED_SYS_NODE="/sys/kernel/fadump_enabled" + +is_fadump_capable() +{ + # Check if firmware-assisted dump is enabled + # if no, fallback to kdump check + if [ -f $FADUMP_ENABLED_SYS_NODE ]; then + rc=`cat $FADUMP_ENABLED_SYS_NODE` + [ $rc -eq 1 ] && return 0 + fi + return 1 +} + +perror_exit() { + echo $@ >&2 + exit 1 +} + +perror() { + echo $@ >&2 +} + +is_ssh_dump_target() +{ + grep -q "^ssh[[:blank:]].*@" /etc/kdump.conf +} + +is_nfs_dump_target() +{ + grep -q "^nfs" /etc/kdump.conf || \ + [[ $(get_dracut_args_fstype "$(grep "^dracut_args .*\-\-mount" /etc/kdump.conf)") = nfs* ]] +} + +is_raw_dump_target() +{ + grep -q "^raw" /etc/kdump.conf +} + +is_fs_type_nfs() +{ + local _fstype=$1 + [ $_fstype = "nfs" ] || [ $_fstype = "nfs4" ] && return 0 + return 1 +} + +is_fs_dump_target() +{ + egrep -q "^ext[234]|^xfs|^btrfs|^minix" /etc/kdump.conf +} + +strip_comments() +{ + echo $@ | sed -e 's/\(.*\)#.*/\1/' +} + +# Read from kdump config file stripping all comments +read_strip_comments() +{ + # strip heading spaces, and print any content starting with + # neither space or #, and strip everything after # + sed -n -e "s/^\s*\([^# \t][^#]\+\).*/\1/gp" $1 +} + +# Check if fence kdump is configured in Pacemaker cluster +is_pcs_fence_kdump() +{ + # no pcs or fence_kdump_send executables installed? + type -P pcs > /dev/null || return 1 + [ -x $FENCE_KDUMP_SEND ] || return 1 + + # fence kdump not configured? + (pcs cluster cib | grep 'type="fence_kdump"') &> /dev/null || return 1 +} + +# Check if fence_kdump is configured using kdump options +is_generic_fence_kdump() +{ + [ -x $FENCE_KDUMP_SEND ] || return 1 + + grep -q "^fence_kdump_nodes" /etc/kdump.conf +} + +to_dev_name() { + local dev="${1//\"/}" + + case "$dev" in + UUID=*) + dev=`blkid -U "${dev#UUID=}"` + ;; + LABEL=*) + dev=`blkid -L "${dev#LABEL=}"` + ;; + esac + echo $dev +} + +is_user_configured_dump_target() +{ + return $(is_mount_in_dracut_args || is_ssh_dump_target || is_nfs_dump_target || \ + is_raw_dump_target || is_fs_dump_target) +} + +get_user_configured_dump_disk() +{ + local _target + + _target=$(egrep "^ext[234]|^xfs|^btrfs|^minix|^raw" /etc/kdump.conf 2>/dev/null |awk '{print $2}') + [ -n "$_target" ] && echo $_target && return + + _target=$(get_dracut_args_target "$(grep "^dracut_args .*\-\-mount" /etc/kdump.conf)") + [ -b "$_target" ] && echo $_target +} + +get_root_fs_device() +{ + findmnt -k -f -n -o SOURCE / +} + +get_save_path() +{ + local _save_path=$(awk '$1 == "path" {print $2}' /etc/kdump.conf) + [ -z "$_save_path" ] && _save_path=$DEFAULT_PATH + + # strip the duplicated "/" + echo $_save_path | tr -s / +} + +get_block_dump_target() +{ + local _target _path + + if is_ssh_dump_target || is_nfs_dump_target; then + return + fi + + _target=$(get_user_configured_dump_disk) + [ -n "$_target" ] && echo $(to_dev_name $_target) && return + + # Get block device name from local save path + _path=$(get_save_path) + _target=$(get_target_from_path $_path) + [ -b "$_target" ] && echo $(to_dev_name $_target) +} + +is_dump_to_rootfs() +{ + grep -E "^(failure_action|default)[[:space:]]dump_to_rootfs" /etc/kdump.conf >/dev/null +} + +get_failure_action_target() +{ + local _target + + if is_dump_to_rootfs; then + # Get rootfs device name + _target=$(get_root_fs_device) + [ -b "$_target" ] && echo $(to_dev_name $_target) && return + # Then, must be nfs root + echo "nfs" + fi +} + +# Get kdump targets(including root in case of dump_to_rootfs). +get_kdump_targets() +{ + local _target _root + local kdump_targets + + _target=$(get_block_dump_target) + if [ -n "$_target" ]; then + kdump_targets=$_target + elif is_ssh_dump_target; then + kdump_targets="ssh" + else + kdump_targets="nfs" + fi + + # Add the root device if dump_to_rootfs is specified. + _root=$(get_failure_action_target) + if [ -n "$_root" -a "$kdump_targets" != "$_root" ]; then + kdump_targets="$kdump_targets $_root" + fi + + echo "$kdump_targets" +} + +# Return the bind mount source path, return the path itself if it's not bind mounted +# Eg. if /path/to/src is bind mounted to /mnt/bind, then: +# /mnt/bind -> /path/to/src, /mnt/bind/dump -> /path/to/src/dump +# +# findmnt uses the option "-v, --nofsroot" to exclusive the [/dir] +# in the SOURCE column for bind-mounts, then if $_mntpoint equals to +# $_mntpoint_nofsroot, the mountpoint is not bind mounted directory. +# +# Below is just an example for mount info +# /dev/mapper/atomicos-root[/ostree/deploy/rhel-atomic-host/var], if the +# directory is bind mounted. The former part represents the device path, rest +# part is the bind mounted directory which quotes by bracket "[]". +get_bind_mount_source() +{ + local _path=$1 + # In case it's a sub path in a mount point, get the mount point first + local _mnt_top=$(df $_path | tail -1 | awk '{print $NF}') + local _mntpoint=$(findmnt $_mnt_top | tail -n 1 | awk '{print $2}') + local _mntpoint_nofsroot=$(findmnt -v $_mnt_top | tail -n 1 | awk '{print $2}') + + if [[ "$_mntpoint" = $_mntpoint_nofsroot ]]; then + echo $_path && return + fi + + _mntpoint=${_mntpoint#*$_mntpoint_nofsroot} + _mntpoint=${_mntpoint#[} + _mntpoint=${_mntpoint%]} + _path=${_path#$_mnt_top} + + echo $_mntpoint$_path +} + +# Return the current underlaying device of a path, ignore bind mounts +get_target_from_path() +{ + local _target + + _target=$(df $1 2>/dev/null | tail -1 | awk '{print $1}') + [[ "$_target" == "/dev/root" ]] && [[ ! -e /dev/root ]] && _target=$(get_root_fs_device) + echo $_target +} + +is_mounted() +{ + findmnt -k -n $1 &>/dev/null +} + +get_mount_info() +{ + local _info_type=$1 _src_type=$2 _src=$3; shift 3 + local _info=$(findmnt -k -n -r -o $_info_type --$_src_type $_src $@) + + [ -z "$_info" ] && [ -e "/etc/fstab" ] && _info=$(findmnt -s -n -r -o $_info_type --$_src_type $_src $@) + + echo $_info +} + +get_fs_type_from_target() +{ + get_mount_info FSTYPE source $1 -f +} + +get_mntopt_from_target() +{ + get_mount_info OPTIONS source $1 -f +} +# Find the general mount point of a dump target, not the bind mount point +get_mntpoint_from_target() +{ + # Expcilitly specify --source to findmnt could ensure non-bind mount is returned + get_mount_info TARGET source $1 -f +} + +# Get the path where the target will be mounted in kdump kernel +# $1: kdump target device +get_kdump_mntpoint_from_target() +{ + local _mntpoint=$(get_mntpoint_from_target $1) + + # mount under /sysroot if dump to root disk or mount under + # mount under /kdumproot if dump target is not mounted in first kernel + # mount under /kdumproot/$_mntpoint in other cases in 2nd kernel. + # systemd will be in charge to umount it. + if [ -z "$_mntpoint" ];then + _mntpoint="/kdumproot" + else + if [ "$_mntpoint" = "/" ];then + _mntpoint="/sysroot" + else + _mntpoint="/kdumproot/$_mntpoint" + fi + fi + + # strip duplicated "/" + echo $_mntpoint | tr -s "/" +} + +# get_option_value +# retrieves value of option defined in kdump.conf +get_option_value() { + strip_comments `grep "^$1[[:space:]]\+" /etc/kdump.conf | tail -1 | cut -d\ -f2-` +} + +kdump_get_persistent_dev() { + local dev="${1//\"/}" + + case "$dev" in + UUID=*) + dev=`blkid -U "${dev#UUID=}"` + ;; + LABEL=*) + dev=`blkid -L "${dev#LABEL=}"` + ;; + esac + echo $(get_persistent_dev "$dev") +} + +is_atomic() +{ + grep -q "ostree" /proc/cmdline +} + +# fixme, try the best to decide whether the ipv6 addr is allocated by slaac or dhcp6 +is_ipv6_auto() +{ + local _netdev=$1 + local _auto=$(cat /proc/sys/net/ipv6/conf/$_netdev/autoconf) + if [ $_auto -eq 1 ]; then + return 0 + else + return 1 + fi +} + +is_ipv6_address() +{ + echo $1 | grep -q ":" +} + +# get ip address or hostname from nfs/ssh config value +get_remote_host() +{ + local _config_val=$1 + + # ipv6 address in kdump.conf is around with "[]", + # factor out the ipv6 address + _config_val=${_config_val#*@} + _config_val=${_config_val%:/*} + _config_val=${_config_val#[} + _config_val=${_config_val%]} + echo $_config_val +} + +is_hostname() +{ + local _hostname=`echo $1 | grep ":"` + + if [ -n "$_hostname" ]; then + return 1 + fi + echo $1 | grep -q "[a-zA-Z]" +} + +# Copied from "/etc/sysconfig/network-scripts/network-functions" +get_hwaddr() +{ + if [ -f "/sys/class/net/${1}/address" ]; then + awk '{ print toupper($0) }' < /sys/class/net/${1}/address + elif [ -d "/sys/class/net/${1}" ]; then + LC_ALL= LANG= ip -o link show ${1} 2>/dev/null | \ + awk '{ print toupper(gensub(/.*link\/[^ ]* ([[:alnum:]:]*).*/, + "\\1", 1)); }' + fi +} + +get_ifcfg_by_device() +{ + grep -E -i -l "^[[:space:]]*DEVICE=\"*${1}\"*[[:space:]]*$" \ + /etc/sysconfig/network-scripts/ifcfg-* 2>/dev/null | head -1 +} + +get_ifcfg_by_hwaddr() +{ + grep -E -i -l "^[[:space:]]*HWADDR=\"*${1}\"*[[:space:]]*$" \ + /etc/sysconfig/network-scripts/ifcfg-* 2>/dev/null | head -1 +} + +get_ifcfg_by_uuid() +{ + grep -E -i -l "^[[:space:]]*UUID=\"*${1}\"*[[:space:]]*$" \ + /etc/sysconfig/network-scripts/ifcfg-* 2>/dev/null | head -1 +} + +get_ifcfg_by_name() +{ + grep -E -i -l "^[[:space:]]*NAME=\"*${1}\"*[[:space:]]*$" \ + /etc/sysconfig/network-scripts/ifcfg-* 2>/dev/null | head -1 +} + +is_nm_running() +{ + [ "$(LANG=C nmcli -t --fields running general status 2>/dev/null)" = "running" ] +} + +is_nm_handling() +{ + LANG=C nmcli -t --fields device,state dev status 2>/dev/null \ + | grep -q "^\(${1}:connected\)\|\(${1}:connecting.*\)$" +} + +# $1: netdev name +get_ifcfg_nmcli() +{ + local nm_uuid nm_name + local ifcfg_file + + # Get the active nmcli config name of $1 + if is_nm_running && is_nm_handling "${1}" ; then + # The configuration "uuid" and "name" generated by nm is wrote to + # the ifcfg file as "UUID=" and "NAME=". + nm_uuid=$(LANG=C nmcli -t --fields uuid,device c show --active 2>/dev/null \ + | grep "${1}" | head -1 | cut -d':' -f1) + nm_name=$(LANG=C nmcli -t --fields name,device c show --active 2>/dev/null \ + | grep "${1}" | head -1 | cut -d':' -f1) + ifcfg_file=$(get_ifcfg_by_uuid "${nm_uuid}") + [ -z "${ifcfg_file}" ] && ifcfg_file=$(get_ifcfg_by_name "${nm_name}") + fi + + echo -n "${ifcfg_file}" +} + +# $1: netdev name +get_ifcfg_legacy() +{ + local ifcfg_file + + ifcfg_file="/etc/sysconfig/network-scripts/ifcfg-${1}" + [ -f "${ifcfg_file}" ] && echo -n "${ifcfg_file}" && return + + ifcfg_file=$(get_ifcfg_by_name "${1}") + [ -f "${ifcfg_file}" ] && echo -n "${ifcfg_file}" && return + + local hwaddr=$(get_hwaddr "${1}") + if [ -n "$hwaddr" ]; then + ifcfg_file=$(get_ifcfg_by_hwaddr "${hwaddr}") + [ -f "${ifcfg_file}" ] && echo -n "${ifcfg_file}" && return + fi + + ifcfg_file=$(get_ifcfg_by_device "${1}") + + echo -n "${ifcfg_file}" +} + +# $1: netdev name +# Return the ifcfg file whole name(including the path) of $1 if any. +get_ifcfg_filename() { + local ifcfg_file + + ifcfg_file=$(get_ifcfg_nmcli "${1}") + if [ -z "${ifcfg_file}" ]; then + ifcfg_file=$(get_ifcfg_legacy "${1}") + fi + + echo -n "${ifcfg_file}" +} + +# returns 0 when omission of watchdog module is desired in dracut_args +# returns 1 otherwise +is_wdt_mod_omitted() { + local dracut_args + local ret=1 + + dracut_args=$(grep "^dracut_args" /etc/kdump.conf) + [[ -z $dracut_args ]] && return $ret + + eval set -- $dracut_args + while :; do + [[ -z $1 ]] && break + case $1 in + -o|--omit) + echo $2 | grep -qw "watchdog" + [[ $? == 0 ]] && ret=0 + break + esac + shift + done + + return $ret +} + +# If "dracut_args" contains "--mount" information, use it +# directly without any check(users are expected to ensure +# its correctness). +is_mount_in_dracut_args() +{ + grep -q "^dracut_args .*\-\-mount" /etc/kdump.conf +} + +# If $1 contains dracut_args "--mount", return +get_dracut_args_fstype() +{ + echo $1 | grep "\-\-mount" | sed "s/.*--mount .\(.*\)/\1/" | cut -d' ' -f3 +} + +# If $1 contains dracut_args "--mount", return +get_dracut_args_target() +{ + echo $1 | grep "\-\-mount" | sed "s/.*--mount .\(.*\)/\1/" | cut -d' ' -f1 +} + +check_crash_mem_reserved() +{ + local mem_reserved + + mem_reserved=$(cat /sys/kernel/kexec_crash_size) + if [ $mem_reserved -eq 0 ]; then + echo "No memory reserved for crash kernel" + return 1 + fi + + return 0 +} + +check_kdump_feasibility() +{ + if [ ! -e /sys/kernel/kexec_crash_loaded ]; then + echo "Kdump is not supported on this kernel" + return 1 + fi + check_crash_mem_reserved + return $? +} + +check_current_kdump_status() +{ + if [ ! -f /sys/kernel/kexec_crash_loaded ];then + echo "Perhaps CONFIG_CRASH_DUMP is not enabled in kernel" + return 1 + fi + + rc=`cat /sys/kernel/kexec_crash_loaded` + if [ $rc == 1 ]; then + return 0 + else + return 1 + fi +} + +# remove_cmdline_param [] ... [] +# Remove a list of kernel parameters from a given kernel cmdline and print the result. +# For each "arg" in the removing params list, "arg" and "arg=xxx" will be removed if exists. +remove_cmdline_param() +{ + local cmdline=$1 + shift + + for arg in $@; do + cmdline=`echo $cmdline | \ + sed -e "s/\b$arg=[^ ]*//g" \ + -e "s/^$arg\b//g" \ + -e "s/[[:space:]]$arg\b//g" \ + -e "s/\s\+/ /g"` + done + echo $cmdline +} + +# +# This function returns the "apicid" of the boot +# cpu (cpu 0) if present. +# +get_bootcpu_apicid() +{ + awk ' \ + BEGIN { CPU = "-1"; } \ + $1=="processor" && $2==":" { CPU = $NF; } \ + CPU=="0" && /^apicid/ { print $NF; } \ + ' \ + /proc/cpuinfo +} + +# +# append_cmdline +# This function appends argument "$2=$3" to string ($1) if not already present. +# +append_cmdline() +{ + local cmdline=$1 + local newstr=${cmdline/$2/""} + + # unchanged str implies argument wasn't there + if [ "$cmdline" == "$newstr" ]; then + cmdline="${cmdline} ${2}=${3}" + fi + + echo $cmdline +} + +# This function check iomem and determines if we have more than +# 4GB of ram available. Returns 1 if we do, 0 if we dont +need_64bit_headers() +{ + return `tail -n 1 /proc/iomem | awk '{ split ($1, r, "-"); \ + print (strtonum("0x" r[2]) > strtonum("0xffffffff")); }'` +} + +# Check if secure boot is being enforced. +# +# Per Peter Jones, we need check efivar SecureBoot-$(the UUID) and +# SetupMode-$(the UUID), they are both 5 bytes binary data. The first four +# bytes are the attributes associated with the variable and can safely be +# ignored, the last bytes are one-byte true-or-false variables. If SecureBoot +# is 1 and SetupMode is 0, then secure boot is being enforced. +# +# Assume efivars is mounted at /sys/firmware/efi/efivars. +is_secure_boot_enforced() +{ + local secure_boot_file setup_mode_file + local secure_boot_byte setup_mode_byte + + # On powerpc, os-secureboot-enforcing DT property indicates whether secureboot + # is enforced. Return success, if it is found. + if [ -f /proc/device-tree/ibm,secureboot/os-secureboot-enforcing ]; then + return 0 + fi + + # Detect secure boot on x86 and arm64 + secure_boot_file=$(find /sys/firmware/efi/efivars -name SecureBoot-* 2>/dev/null) + setup_mode_file=$(find /sys/firmware/efi/efivars -name SetupMode-* 2>/dev/null) + + if [ -f "$secure_boot_file" ] && [ -f "$setup_mode_file" ]; then + secure_boot_byte=$(hexdump -v -e '/1 "%d\ "' $secure_boot_file|cut -d' ' -f 5) + setup_mode_byte=$(hexdump -v -e '/1 "%d\ "' $setup_mode_file|cut -d' ' -f 5) + + if [ "$secure_boot_byte" = "1" ] && [ "$setup_mode_byte" = "0" ]; then + return 0 + fi + fi + + # Detect secure boot on s390x + if [[ -e "/sys/firmware/ipl/secure" && "$(cat /sys/firmware/ipl/secure)" == "1" ]]; then + return 0 + fi + + return 1 +} + +# +# prepare_kexec_args +# This function prepares kexec argument. +# +prepare_kexec_args() +{ + local kexec_args=$1 + local found_elf_args + + ARCH=`uname -m` + if [ "$ARCH" == "i686" -o "$ARCH" == "i386" ] + then + need_64bit_headers + if [ $? == 1 ] + then + found_elf_args=`echo $kexec_args | grep elf32-core-headers` + if [ -n "$found_elf_args" ] + then + echo -n "Warning: elf32-core-headers overrides correct elf64 setting" + echo + else + kexec_args="$kexec_args --elf64-core-headers" + fi + else + found_elf_args=`echo $kexec_args | grep elf64-core-headers` + if [ -z "$found_elf_args" ] + then + kexec_args="$kexec_args --elf32-core-headers" + fi + fi + fi + echo $kexec_args +} + +check_boot_dir() +{ + local kdump_bootdir=$1 + #If user specify a boot dir for kdump kernel, let's use it. Otherwise + #check whether it's a atomic host. If yes parse the subdirectory under + #/boot; If not just find it under /boot. + if [ -n "$kdump_bootdir" ]; then + echo "$kdump_bootdir" + return + fi + + if ! is_atomic || [ "$(uname -m)" = "s390x" ]; then + kdump_bootdir="/boot" + else + eval $(cat /proc/cmdline| grep "BOOT_IMAGE" | cut -d' ' -f1) + kdump_bootdir="/boot"$(dirname $BOOT_IMAGE) + fi + echo $kdump_bootdir +} + +# +# prepare_cmdline +# This function performs a series of edits on the command line. +# Store the final result in global $KDUMP_COMMANDLINE. +prepare_cmdline() +{ + local cmdline id + + if [ -z "$1" ]; then + cmdline=$(cat /proc/cmdline) + else + cmdline="$1" + fi + + # These params should always be removed + cmdline=$(remove_cmdline_param "$cmdline" crashkernel panic_on_warn) + # These params can be removed configurably + cmdline=$(remove_cmdline_param "$cmdline" "$2") + + # Always remove "root=X", as we now explicitly generate all kinds + # of dump target mount information including root fs. + # + # We do this before KDUMP_COMMANDLINE_APPEND, if one really cares + # about it(e.g. for debug purpose), then can pass "root=X" using + # KDUMP_COMMANDLINE_APPEND. + cmdline=$(remove_cmdline_param "$cmdline" root) + + # With the help of "--hostonly-cmdline", we can avoid some interitage. + cmdline=$(remove_cmdline_param "$cmdline" rd.lvm.lv rd.luks.uuid rd.dm.uuid rd.md.uuid fcoe) + + # Remove netroot, rd.iscsi.initiator and iscsi_initiator since + # we get duplicate entries for the same in case iscsi code adds + # it as well. + cmdline=$(remove_cmdline_param "$cmdline" netroot rd.iscsi.initiator iscsi_initiator) + + cmdline="${cmdline} $3" + + id=$(get_bootcpu_apicid) + if [ ! -z ${id} ] ; then + cmdline=$(append_cmdline "${cmdline}" disable_cpu_apicid ${id}) + fi + + # Disable efifb if hyperv_fb is in use, hyperv_fb will relocate the framebuffer + # but kexec_file_load always use original screen_info and in second kernel efifb + # will try to access an invalid framebuffer address + if [ -d /sys/module/hyperv_fb ]; then + cmdline=$(append_cmdline "$cmdline" "video=efifb:off") + fi + + echo ${cmdline} +} diff --git a/SOURCES/kdump-udev-throttler b/SOURCES/kdump-udev-throttler new file mode 100755 index 0000000..cd77a31 --- /dev/null +++ b/SOURCES/kdump-udev-throttler @@ -0,0 +1,42 @@ +#!/bin/bash +# This util helps to reduce the workload of kdump service restarting +# on udev event. When hotplugging memory / CPU, multiple udev +# events may be triggered concurrently, and obviously, we don't want +# to restart kdump service for each event. + +# This script will be called by udev, and make sure kdump service is +# restart after all events we are watching are settled. + +# On each call, this script will update try to aquire the $throttle_lock +# The first instance acquired the file lock will keep waiting for events +# to settle and then reload kdump. Other instances will just exit +# In this way, we can make sure kdump service is restarted immediately +# and for exactly once after udev events are settled. + +throttle_lock="/var/lock/kdump-udev-throttle" + +exec 9>$throttle_lock +if [ $? -ne 0 ]; then + echo "Failed to create the lock file! Fallback to non-throttled kdump service restart" + /bin/kdumpctl reload + exit 1 +fi + +flock -n 9 +if [ $? -ne 0 ]; then + echo "Throttling kdump restart for concurrent udev event" + exit 0 +fi + +# Wait for at least 1 second, at most 4 seconds for udev to settle +# Idealy we will have a less than 1 second lag between udev events settle +# and kdump reload +sleep 1 && udevadm settle --timeout 3 + +# Release the lock, /bin/kdumpctl will block and make the process +# holding two locks at the same time and we might miss some events +exec 9>&- + +/bin/kdumpctl reload + +exit 0 diff --git a/SOURCES/kdump.conf b/SOURCES/kdump.conf new file mode 100644 index 0000000..76fecd4 --- /dev/null +++ b/SOURCES/kdump.conf @@ -0,0 +1,183 @@ +# This file contains a series of commands to perform (in order) in the kdump +# kernel after a kernel crash in the crash kernel(1st kernel) has happened. +# +# Directives in this file are only applicable to the kdump initramfs, and have +# no effect once the root filesystem is mounted and the normal init scripts are +# processed. +# +# Currently, only one dump target and path can be specified. If the dumping to +# the configured target fails, the failure action which can be configured via +# the "failure_action" directive will be performed. +# +# Supported options: +# +# raw +# - Will dd /proc/vmcore into . +# Use persistent device names for partition devices, +# such as /dev/vg/. +# +# nfs +# - Will mount nfs to , and copy /proc/vmcore to +# //%HOST-%DATE/, supports DNS. +# +# ssh +# - Will scp /proc/vmcore to :/%HOST-%DATE/, +# supports DNS. +# NOTE: make sure the user has write permissions on the server. +# +# sshkey +# - Will use the sshkey to do ssh dump. +# Specify the path of the ssh key to use when dumping +# via ssh. The default value is /root/.ssh/kdump_id_rsa. +# +# +# - Will mount -t , and copy +# /proc/vmcore to //%DATE/. +# NOTE: can be a device node, label or uuid. +# It's recommended to use persistent device names +# such as /dev/vg/. +# Otherwise it's suggested to use label or uuid. +# +# path +# - "path" represents the file system path in which vmcore +# will be saved. If a dump target is specified in +# kdump.conf, then "path" is relative to the specified +# dump target. +# +# Interpretation of "path" changes a bit if the user didn't +# specify any dump target explicitly in kdump.conf. In this +# case, "path" represents the absolute path from root. The +# dump target and adjusted path are arrived at automatically +# depending on what's mounted in the current system. +# +# Ignored for raw device dumps. If unset, will use the default +# "/var/crash". +# +# core_collector +# - This allows you to specify the command to copy +# the vmcore. The default is makedumpfile, which on +# some architectures can drastically reduce vmcore size. +# See /sbin/makedumpfile --help for a list of options. +# Note that the -i and -g options are not needed here, +# as the initrd will automatically be populated with a +# config file appropriate for the running kernel. +# The default core_collector for raw/ssh dump is: +# "makedumpfile -F -l --message-level 1 -d 31". +# The default core_collector for other targets is: +# "makedumpfile -l --message-level 1 -d 31". +# +# "makedumpfile -F" will create a flattened vmcore. +# You need to use "makedumpfile -R" to rearrange the dump data to +# a normal dumpfile readable with analysis tools. For example: +# "makedumpfile -R vmcore < vmcore.flat". +# +# For core_collector format details, you can refer to +# kexec-kdump-howto.txt or kdump.conf manpage. +# +# kdump_post +# - This directive allows you to run a executable binary +# or script after the vmcore dump process terminates. +# The exit status of the current dump process is fed to +# the executable binary or script as its first argument. +# All files under /etc/kdump/post.d are collectively sorted +# and executed in lexical order, before binary or script +# specified kdump_post parameter is executed. +# +# kdump_pre +# - Works like the "kdump_post" directive, but instead of running +# after the dump process, runs immediately before it. +# Exit status of this binary is interpreted as follows: +# 0 - continue with dump process as usual +# non 0 - run the final action (reboot/poweroff/halt) +# All files under /etc/kdump/pre.d are collectively sorted and +# executed in lexical order, after binary or script specified +# kdump_pre parameter is executed. +# Even if the binary or script in /etc/kdump/pre.d directory +# returns non 0 exit status, the processing is continued. +# +# extra_bins +# - This directive allows you to specify additional binaries or +# shell scripts to be included in the kdump initrd. +# Generally they are useful in conjunction with a kdump_post +# or kdump_pre binary or script which depends on these extra_bins. +# +# extra_modules +# - This directive allows you to specify extra kernel modules +# that you want to be loaded in the kdump initrd. +# Multiple modules can be listed, separated by spaces, and any +# dependent modules will automatically be included. +# +# failure_action +# - Action to perform in case dumping fails. +# reboot: Reboot the system. +# halt: Halt the system. +# poweroff: Power down the system. +# shell: Drop to a bash shell. +# Exiting the shell reboots the system by default, +# or perform "final_action". +# dump_to_rootfs: Dump vmcore to rootfs from initramfs context and +# reboot by default or perform "final_action". +# Useful when non-root dump target is specified. +# The default option is "reboot". +# +# default +# - Same as the "failure_action" directive above, but this directive +# is obsolete and will be removed in the future. +# +# final_action +# - Action to perform in case dumping succeeds. Also performed +# when "shell" or "dump_to_rootfs" failure action finishes. +# Each action is same as the "failure_action" directive above. +# The default is "reboot". +# +# force_rebuild <0 | 1> +# - By default, kdump initrd will only be rebuilt when necessary. +# Specify 1 to force rebuilding kdump initrd every time when kdump +# service starts. +# +# force_no_rebuild <0 | 1> +# - By default, kdump initrd will be rebuilt when necessary. +# Specify 1 to bypass rebuilding of kdump initrd. +# +# force_no_rebuild and force_rebuild options are mutually +# exclusive and they should not be set to 1 simultaneously. +# +# override_resettable <0 | 1> +# - Usually an unresettable block device can't be a dump target. +# Specifying 1 when you want to dump even though the block +# target is unresettable +# By default, it is 0, which will not try dumping destined to fail. +# +# dracut_args +# - Pass extra dracut options when rebuilding kdump initrd. +# +# fence_kdump_args +# - Command line arguments for fence_kdump_send (it can contain +# all valid arguments except hosts to send notification to). +# +# fence_kdump_nodes +# - List of cluster node(s) except localhost, separated by spaces, +# to send fence_kdump notifications to. +# (this option is mandatory to enable fence_kdump). +# + +#raw /dev/vg/lv_kdump +#ext4 /dev/vg/lv_kdump +#ext4 LABEL=/boot +#ext4 UUID=03138356-5e61-4ab3-b58e-27507ac41937 +#nfs my.server.com:/export/tmp +#ssh user@my.server.com +#sshkey /root/.ssh/kdump_id_rsa +path /var/crash +core_collector makedumpfile -l --message-level 1 -d 31 +#core_collector scp +#kdump_post /var/crash/scripts/kdump-post.sh +#kdump_pre /var/crash/scripts/kdump-pre.sh +#extra_bins /usr/bin/lftp +#extra_modules gfs2 +#failure_action shell +#force_rebuild 1 +#force_no_rebuild 1 +#dracut_args --omit-drivers "cfg80211 snd" --add-drivers "ext2 ext3" +#fence_kdump_args -p 7410 -f auto -c 0 -i 10 +#fence_kdump_nodes node1 node2 diff --git a/SOURCES/kdump.conf.5 b/SOURCES/kdump.conf.5 new file mode 100644 index 0000000..4aacac8 --- /dev/null +++ b/SOURCES/kdump.conf.5 @@ -0,0 +1,370 @@ +.TH KDUMP.CONF 5 "07/23/2008" "kexec-tools" + +.SH NAME +kdump.conf \- configuration file for kdump kernel. + +.SH DESCRIPTION + +kdump.conf is a configuration file for the kdump kernel crash +collection service. + +kdump.conf provides post-kexec instructions to the kdump kernel. It is +stored in the initrd file managed by the kdump service. If you change +this file and do not want to reboot in order for the changes to take +effect, restart the kdump service to rebuild the initrd. + +For most configurations, you can simply review the examples provided +in the stock /etc/kdump.conf. + +.B NOTE: +For filesystem dumps the dump target must be mounted before building +kdump initramfs. + +kdump.conf only affects the behavior of the initramfs. Please read the +kdump operational flow section of kexec-kdump-howto.txt in the docs to better +understand how this configuration file affects the behavior of kdump. + +.SH OPTIONS + +.B raw +.RS +Will dd /proc/vmcore into . Use persistent device names for +partition devices, such as /dev/vg/. +.RE + +.B nfs +.RS +Will mount nfs to , and copy /proc/vmcore to //%HOST-%DATE/, +supports DNS. Note that a fqdn should be used as the server name in the +mount point. +.RE + +.B ssh +.RS +Will scp /proc/vmcore to :/%HOST-%DATE/, +supports DNS. NOTE: make sure user has necessary write permissions on +server and that a fqdn is used as the server name. +.RE + +.B sshkey +.RS +Specify the path of the ssh key to use when dumping via ssh. +The default value is /root/.ssh/kdump_id_rsa. +.RE + +.B +.RS +Will mount -t , and copy /proc/vmcore to +//%DATE/. NOTE: can be a device node, label +or uuid. It's recommended to use persistent device names such as +/dev/vg/. Otherwise it's suggested to use label or uuid. +.RE + +.B path +.RS +"path" represents the file system path in which vmcore will be saved. +If a dump target is specified in kdump.conf, then "path" is relative to the +specified dump target. +.PP +Interpretation of "path" changes a bit if the user didn't specify any dump +target explicitly in kdump.conf. In this case, "path" represents the +absolute path from root. The dump target and adjusted path are arrived +at automatically depending on what's mounted in the current system. +.PP +Ignored for raw device dumps. If unset, will use the default "/var/crash". +.RE + +.B core_collector +.RS +This allows you to specify the command to copy the vmcore. +The default is makedumpfile, which on some architectures can drastically reduce +core file size. See /sbin/makedumpfile --help for a list of options. +Note that the -i and -g options are not needed here, as the initrd +will automatically be populated with a config file appropriate +for the running kernel. +.PP +Note 1: About default core collector: +The default core_collector for raw/ssh dump is: +"makedumpfile -F -l --message-level 1 -d 31". +The default core_collector for other targets is: +"makedumpfile -l --message-level 1 -d 31". +Even if core_collector option is commented out in kdump.conf, makedumpfile +is the default core collector and kdump uses it internally. +If one does not want makedumpfile as default core_collector, then they +need to specify one using core_collector option to change the behavior. +.PP +Note 2: If "makedumpfile -F" is used then you will get a flattened format +vmcore.flat, you will need to use "makedumpfile -R" to rearrange the +dump data from standard input to a normal dumpfile (readable with analysis +tools). +ie. "makedumpfile -R vmcore < vmcore.flat" + +.RE + +.B kdump_post +.RS +This directive allows you to run a specified executable +just after the vmcore dump process terminates. The exit +status of the current dump process is fed to the kdump_post +executable as its first argument($1). Executable can modify +it to indicate the new exit status of succeeding dump process, +.PP +All files under /etc/kdump/post.d are collectively sorted +and executed in lexical order, before binary or script +specified kdump_post parameter is executed. +.PP +Note that scripts written for use with this directive must use +the /bin/bash interpreter. +.RE + +.B kdump_pre +.RS +Works just like the "kdump_post" directive, but instead +of running after the dump process, runs immediately +before. Exit status of this binary is interpreted +as follows: +.PP +0 - continue with dump process as usual +.PP +non 0 - run the final action (reboot/poweroff/halt) +.PP +All files under /etc/kdump/pre.d are collectively sorted and +executed in lexical order, after binary or script specified +kdump_pre parameter is executed. +Even if the binary or script in /etc/kdump/pre.d directory +returns non 0 exit status, the processing is continued. +.PP +Note that scripts written for this directive must use +the /bin/bash interpreter. +.RE + +.B extra_bins +.RS +This directive allows you to specify additional +binaries or shell scripts you'd like to include in +your kdump initrd. Generally only useful in +conjunction with a kdump_post binary or script that +relies on other binaries or scripts. +.RE + +.B extra_modules +.RS +This directive allows you to specify extra kernel +modules that you want to be loaded in the kdump +initrd, typically used to set up access to +non-boot-path dump targets that might otherwise +not be accessible in the kdump environment. Multiple +modules can be listed, separated by spaces, and any +dependent modules will automatically be included. +.RE + +.B failure_action +.RS +Action to perform in case dumping to the intended target fails. The default is "reboot". +reboot: Reboot the system (this is what most people will want, as it returns the system +to a normal state). halt: Halt the system and lose the vmcore. poweroff: The system +will be powered down. shell: Drop to a shell session inside the initramfs, from which +you can manually perform additional recovery actions. Exiting this shell reboots the +system by default or performs "final_action". +Note: kdump uses bash as the default shell. dump_to_rootfs: If non-root dump +target is specified, the failure action can be set as dump_to_rootfs. That means when +dumping to target fails, dump vmcore to rootfs from initramfs context and reboot +by default or perform "final_action". +.RE + +.B default +.RS +Same as the "failure_action" directive above, but this directive is obsolete +and will be removed in the future. +.RE + +.B final_action +.RS +Action to perform in case dumping to the intended target succeeds. +Also performed when "shell" or "dump_to_rootfs" failure action finishes. +Each action is same as the "failure_action" directive above. +The default is "reboot". +.RE + +.B force_rebuild <0 | 1> +.RS +By default, kdump initrd will only be rebuilt when necessary. +Specify 1 to force rebuilding kdump initrd every time when kdump service starts. +.RE + +.B force_no_rebuild <0 | 1> +.RS +By default, kdump initrd will be rebuilt when necessary. +Specify 1 to bypass rebuilding of kdump initrd. + +.PP +force_no_rebuild and force_rebuild options are mutually exclusive and +they should not be set to 1 simultaneously. +.RE + +.B override_resettable <0 | 1> +.RS +Usually an unresettable block device can't be a dump target. Specifying 1 means +that even though the block target is unresettable, the user wants to try dumping anyway. +By default, it's set to 0, which will not try something destined to fail. +.RE + + +.B dracut_args +.RS +Kdump uses dracut to generate initramfs for second kernel. This option +allows a user to pass arguments to dracut directly. +.RE + + +.B fence_kdump_args +.RS +Command line arguments for fence_kdump_send (it can contain all valid +arguments except hosts to send notification to). +.RE + + +.B fence_kdump_nodes +.RS +List of cluster node(s) except localhost, separated by spaces, to send fence_kdump notification +to (this option is mandatory to enable fence_kdump). +.RE + + +.SH DEPRECATED OPTIONS + +.B net | +.RS +net option is replaced by nfs and ssh options. Use nfs or ssh options +directly. +.RE + +.B options