From 60e5a1e7a5129117ac23258610d89b21957df202 Mon Sep 17 00:00:00 2001 From: Tao Liu Date: Wed, 3 Nov 2021 19:20:19 +0800 Subject: [PATCH] kdump-lib.sh: replace '[ ]' with '[[ ]]' and get rid of legacy `` upstream: fedora resolves: bz2003832 conflict: Patch hunk modified for function is_secure_boot_enforced(). commit 30090f3a15d266937bba6ef2429876e26b5e92d7 Author: Kairui Song Date: Mon Sep 13 01:17:05 2021 +0800 kdump-lib.sh: replace '[ ]' with '[[ ]]' and get rid of legacy `` Updated file syntax with following command: sed -i -e 's/\(\s\)\[\s\([^]]*\)\s\]/\1\[\[\ \2 \]\]/g' kdump-lib.sh (replace '[ ]' with '[[ ]]') sed -i -e 's/`\([^`]*\)`/\$(\1)/g' kdump-lib.sh (replace `...` with $(...)) And manually updated [[ ... -a ... ]] and [[ ... -o ... ]] with && and ||. Signed-off-by: Kairui Song Acked-by: Philipp Rudo Signed-off-by: Tao Liu --- kdump-lib.sh | 144 +++++++++++++++++++++++++-------------------------- 1 file changed, 72 insertions(+), 72 deletions(-) diff --git a/kdump-lib.sh b/kdump-lib.sh index 947e866..57d123a 100755 --- a/kdump-lib.sh +++ b/kdump-lib.sh @@ -13,16 +13,16 @@ is_fadump_capable() { # Check if firmware-assisted dump is enabled # if no, fallback to kdump check - if [ -f $FADUMP_ENABLED_SYS_NODE ]; then - rc=`cat $FADUMP_ENABLED_SYS_NODE` - [ $rc -eq 1 ] && return 0 + if [[ -f $FADUMP_ENABLED_SYS_NODE ]]; then + rc=$(cat $FADUMP_ENABLED_SYS_NODE) + [[ $rc -eq 1 ]] && return 0 fi return 1 } is_squash_available() { for kmodule in squashfs overlay loop; do - if [ -z "$KDUMP_KERNELVER" ]; then + if [[ -z "$KDUMP_KERNELVER" ]]; then modprobe --dry-run $kmodule &>/dev/null || return 1 else modprobe -S $KDUMP_KERNELVER --dry-run $kmodule &>/dev/null || return 1 @@ -40,7 +40,7 @@ is_pcs_fence_kdump() { # no pcs or fence_kdump_send executables installed? type -P pcs > /dev/null || return 1 - [ -x $FENCE_KDUMP_SEND ] || return 1 + [[ -x $FENCE_KDUMP_SEND ]] || return 1 # fence kdump not configured? (pcs cluster cib | grep 'type="fence_kdump"') &> /dev/null || return 1 @@ -49,7 +49,7 @@ is_pcs_fence_kdump() # Check if fence_kdump is configured using kdump options is_generic_fence_kdump() { - [ -x $FENCE_KDUMP_SEND ] || return 1 + [[ -x $FENCE_KDUMP_SEND ]] || return 1 [[ $(kdump_get_conf_val fence_kdump_nodes) ]] } @@ -59,10 +59,10 @@ to_dev_name() { case "$dev" in UUID=*) - dev=`blkid -U "${dev#UUID=}"` + dev=$(blkid -U "${dev#UUID=}") ;; LABEL=*) - dev=`blkid -L "${dev#LABEL=}"` + dev=$(blkid -L "${dev#LABEL=}") ;; esac echo $dev @@ -78,10 +78,10 @@ get_user_configured_dump_disk() local _target _target=$(kdump_get_conf_val "ext[234]\|xfs\|btrfs\|minix\|raw") - [ -n "$_target" ] && echo $_target && return + [[ -n "$_target" ]] && echo $_target && return _target=$(get_dracut_args_target "$(kdump_get_conf_val "dracut_args")") - [ -b "$_target" ] && echo $_target + [[ -b "$_target" ]] && echo $_target } get_block_dump_target() @@ -93,12 +93,12 @@ get_block_dump_target() fi _target=$(get_user_configured_dump_disk) - [ -n "$_target" ] && echo $(to_dev_name $_target) && return + [[ -n "$_target" ]] && echo $(to_dev_name $_target) && return # Get block device name from local save path _path=$(get_save_path) _target=$(get_target_from_path $_path) - [ -b "$_target" ] && echo $(to_dev_name $_target) + [[ -b "$_target" ]] && echo $(to_dev_name $_target) } is_dump_to_rootfs() @@ -113,7 +113,7 @@ get_failure_action_target() if is_dump_to_rootfs; then # Get rootfs device name _target=$(get_root_fs_device) - [ -b "$_target" ] && echo $(to_dev_name $_target) && return + [[ -b "$_target" ]] && echo $(to_dev_name $_target) && return # Then, must be nfs root echo "nfs" fi @@ -126,7 +126,7 @@ get_kdump_targets() local kdump_targets _target=$(get_block_dump_target) - if [ -n "$_target" ]; then + if [[ -n "$_target" ]]; then kdump_targets=$_target elif is_ssh_dump_target; then kdump_targets="ssh" @@ -136,7 +136,7 @@ get_kdump_targets() # Add the root device if dump_to_rootfs is specified. _root=$(get_failure_action_target) - if [ -n "$_root" -a "$kdump_targets" != "$_root" ]; then + if [[ -n "$_root" ]] && [[ "$kdump_targets" != "$_root" ]]; then kdump_targets="$kdump_targets $_root" fi @@ -204,10 +204,10 @@ get_kdump_mntpoint_from_target() # mount under /kdumproot if dump target is not mounted in first kernel # mount under /kdumproot/$_mntpoint in other cases in 2nd kernel. # systemd will be in charge to umount it. - if [ -z "$_mntpoint" ];then + if [[ -z "$_mntpoint" ]];then _mntpoint="/kdumproot" else - if [ "$_mntpoint" = "/" ];then + if [[ "$_mntpoint" = "/" ]];then _mntpoint="/sysroot" else _mntpoint="/kdumproot/$_mntpoint" @@ -223,10 +223,10 @@ kdump_get_persistent_dev() { case "$dev" in UUID=*) - dev=`blkid -U "${dev#UUID=}"` + dev=$(blkid -U "${dev#UUID=}") ;; LABEL=*) - dev=`blkid -L "${dev#LABEL=}"` + dev=$(blkid -L "${dev#LABEL=}") ;; esac echo $(get_persistent_dev "$dev") @@ -253,9 +253,9 @@ get_remote_host() is_hostname() { - local _hostname=`echo $1 | grep ":"` + local _hostname=$(echo $1 | grep ":") - if [ -n "$_hostname" ]; then + if [[ -n "$_hostname" ]]; then return 1 fi echo $1 | grep -q "[a-zA-Z]" @@ -264,9 +264,9 @@ is_hostname() # Copied from "/etc/sysconfig/network-scripts/network-functions" get_hwaddr() { - if [ -f "/sys/class/net/${1}/address" ]; then + if [[ -f "/sys/class/net/${1}/address" ]]; then awk '{ print toupper($0) }' < /sys/class/net/${1}/address - elif [ -d "/sys/class/net/${1}" ]; then + elif [[ -d "/sys/class/net/${1}" ]]; then LC_ALL= LANG= ip -o link show ${1} 2>/dev/null | \ awk '{ print toupper(gensub(/.*link\/[^ ]* ([[:alnum:]:]*).*/, "\\1", 1)); }' @@ -347,7 +347,7 @@ get_ifcfg_by_name() is_nm_running() { - [ "$(LANG=C nmcli -t --fields running general status 2>/dev/null)" = "running" ] + [[ "$(LANG=C nmcli -t --fields running general status 2>/dev/null)" = "running" ]] } is_nm_handling() @@ -371,7 +371,7 @@ get_ifcfg_nmcli() nm_name=$(LANG=C nmcli -t --fields name,device c show --active 2>/dev/null \ | grep "${1}" | head -1 | cut -d':' -f1) ifcfg_file=$(get_ifcfg_by_uuid "${nm_uuid}") - [ -z "${ifcfg_file}" ] && ifcfg_file=$(get_ifcfg_by_name "${nm_name}") + [[ -z "${ifcfg_file}" ]] && ifcfg_file=$(get_ifcfg_by_name "${nm_name}") fi echo -n "${ifcfg_file}" @@ -383,15 +383,15 @@ get_ifcfg_legacy() local ifcfg_file ifcfg_file="/etc/sysconfig/network-scripts/ifcfg-${1}" - [ -f "${ifcfg_file}" ] && echo -n "${ifcfg_file}" && return + [[ -f "${ifcfg_file}" ]] && echo -n "${ifcfg_file}" && return ifcfg_file=$(get_ifcfg_by_name "${1}") - [ -f "${ifcfg_file}" ] && echo -n "${ifcfg_file}" && return + [[ -f "${ifcfg_file}" ]] && echo -n "${ifcfg_file}" && return local hwaddr=$(get_hwaddr "${1}") - if [ -n "$hwaddr" ]; then + if [[ -n "$hwaddr" ]]; then ifcfg_file=$(get_ifcfg_by_hwaddr "${hwaddr}") - [ -f "${ifcfg_file}" ] && echo -n "${ifcfg_file}" && return + [[ -f "${ifcfg_file}" ]] && echo -n "${ifcfg_file}" && return fi ifcfg_file=$(get_ifcfg_by_device "${1}") @@ -405,7 +405,7 @@ get_ifcfg_filename() { local ifcfg_file ifcfg_file=$(get_ifcfg_nmcli "${1}") - if [ -z "${ifcfg_file}" ]; then + if [[ -z "${ifcfg_file}" ]]; then ifcfg_file=$(get_ifcfg_legacy "${1}") fi @@ -432,11 +432,11 @@ is_dracut_mod_omitted() { is_wdt_active() { local active - [ -d /sys/class/watchdog ] || return 1 + [[ -d /sys/class/watchdog ]] || return 1 for dir in /sys/class/watchdog/*; do - [ -f "$dir/state" ] || continue + [[ -f "$dir/state" ]] || continue active=$(< "$dir/state") - [ "$active" = "active" ] && return 0 + [[ "$active" = "active" ]] && return 0 done return 1 } @@ -454,7 +454,7 @@ check_crash_mem_reserved() local mem_reserved mem_reserved=$(cat /sys/kernel/kexec_crash_size) - if [ $mem_reserved -eq 0 ]; then + if [[ $mem_reserved -eq 0 ]]; then derror "No memory reserved for crash kernel" return 1 fi @@ -464,7 +464,7 @@ check_crash_mem_reserved() check_kdump_feasibility() { - if [ ! -e /sys/kernel/kexec_crash_loaded ]; then + if [[ ! -e /sys/kernel/kexec_crash_loaded ]]; then derror "Kdump is not supported on this kernel" return 1 fi @@ -474,13 +474,13 @@ check_kdump_feasibility() check_current_kdump_status() { - if [ ! -f /sys/kernel/kexec_crash_loaded ];then + if [[ ! -f /sys/kernel/kexec_crash_loaded ]];then derror "Perhaps CONFIG_CRASH_DUMP is not enabled in kernel" return 1 fi - rc=`cat /sys/kernel/kexec_crash_loaded` - if [ $rc == 1 ]; then + rc=$(cat /sys/kernel/kexec_crash_loaded) + if [[ $rc == 1 ]]; then return 0 else return 1 @@ -496,11 +496,11 @@ remove_cmdline_param() shift for arg in $@; do - cmdline=`echo $cmdline | \ + cmdline=$(echo "$cmdline" | \ sed -e "s/\b$arg=[^ ]*//g" \ -e "s/^$arg\b//g" \ -e "s/[[:space:]]$arg\b//g" \ - -e "s/\s\+/ /g"` + -e "s/\s\+/ /g") done echo $cmdline } @@ -529,7 +529,7 @@ append_cmdline() local newstr=${cmdline/$2/""} # unchanged str implies argument wasn't there - if [ "$cmdline" == "$newstr" ]; then + if [[ "$cmdline" == "$newstr" ]]; then cmdline="${cmdline} ${2}=${3}" fi @@ -540,8 +540,8 @@ append_cmdline() # 4GB of ram available. Returns 1 if we do, 0 if we dont need_64bit_headers() { - return `tail -n 1 /proc/iomem | awk '{ split ($1, r, "-"); \ - print (strtonum("0x" r[2]) > strtonum("0xffffffff")); }'` + return "$(tail -n 1 /proc/iomem | awk '{ split ($1, r, "-"); + print (strtonum("0x" r[2]) > strtonum("0xffffffff")); }')" } # Check if secure boot is being enforced. @@ -560,7 +560,7 @@ is_secure_boot_enforced() # On powerpc, os-secureboot-enforcing DT property indicates whether secureboot # is enforced. Return success, if it is found. - if [ -f /proc/device-tree/ibm,secureboot/os-secureboot-enforcing ]; then + if [[ -f /proc/device-tree/ibm,secureboot/os-secureboot-enforcing ]]; then return 0 fi @@ -568,11 +568,11 @@ is_secure_boot_enforced() secure_boot_file=$(find /sys/firmware/efi/efivars -name SecureBoot-* 2>/dev/null) setup_mode_file=$(find /sys/firmware/efi/efivars -name SetupMode-* 2>/dev/null) - if [ -f "$secure_boot_file" ] && [ -f "$setup_mode_file" ]; then + if [[ -f "$secure_boot_file" ]] && [[ -f "$setup_mode_file" ]]; then secure_boot_byte=$(hexdump -v -e '/1 "%d\ "' $secure_boot_file|cut -d' ' -f 5) setup_mode_byte=$(hexdump -v -e '/1 "%d\ "' $setup_mode_file|cut -d' ' -f 5) - if [ "$secure_boot_byte" = "1" ] && [ "$setup_mode_byte" = "0" ]; then + if [[ "$secure_boot_byte" = "1" ]] && [[ "$setup_mode_byte" = "0" ]]; then return 0 fi fi @@ -594,22 +594,22 @@ prepare_kexec_args() local kexec_args=$1 local found_elf_args - ARCH=`uname -m` - if [ "$ARCH" == "i686" -o "$ARCH" == "i386" ] + ARCH=$(uname -m) + if [[ "$ARCH" == "i686" ]] || [[ "$ARCH" == "i386" ]] then need_64bit_headers - if [ $? == 1 ] + if [[ $? == 1 ]] then - found_elf_args=`echo $kexec_args | grep elf32-core-headers` - if [ -n "$found_elf_args" ] + found_elf_args=$(echo $kexec_args | grep elf32-core-headers) + if [[ -n "$found_elf_args" ]] then dwarn "Warning: elf32-core-headers overrides correct elf64 setting" else kexec_args="$kexec_args --elf64-core-headers" fi else - found_elf_args=`echo $kexec_args | grep elf64-core-headers` - if [ -z "$found_elf_args" ] + found_elf_args=$(echo $kexec_args | grep elf64-core-headers) + if [[ -z "$found_elf_args" ]] then kexec_args="$kexec_args --elf32-core-headers" fi @@ -630,7 +630,7 @@ prepare_kdump_bootinfo() local boot_imglist boot_dirlist boot_initrdlist curr_kver="$(uname -r)" local machine_id - if [ -z "$KDUMP_KERNELVER" ]; then + if [[ -z "$KDUMP_KERNELVER" ]]; then KDUMP_KERNELVER="$(uname -r)" fi @@ -640,20 +640,20 @@ prepare_kdump_bootinfo() # Use BOOT_IMAGE as reference if possible, strip the GRUB root device prefix in (hd0,gpt1) format local boot_img="$(cat /proc/cmdline | sed "s/^BOOT_IMAGE=\((\S*)\)\?\(\S*\) .*/\2/")" - if [ -n "$boot_img" ]; then + if [[ -n "$boot_img" ]]; then boot_imglist="$boot_img $boot_imglist" fi for dir in $boot_dirlist; do for img in $boot_imglist; do - if [ -f "$dir/$img" ]; then + if [[ -f "$dir/$img" ]]; then KDUMP_KERNEL=$(echo $dir/$img | tr -s '/') break 2 fi done done - if ! [ -e "$KDUMP_KERNEL" ]; then + if ! [[ -e "$KDUMP_KERNEL" ]]; then derror "Failed to detect kdump kernel location" return 1 fi @@ -664,7 +664,7 @@ prepare_kdump_bootinfo() # Default initrd should just stay aside of kernel image, try to find it in KDUMP_BOOTDIR boot_initrdlist="initramfs-$KDUMP_KERNELVER.img initrd" for initrd in $boot_initrdlist; do - if [ -f "$KDUMP_BOOTDIR/$initrd" ]; then + if [[ -f "$KDUMP_BOOTDIR/$initrd" ]]; then defaut_initrd_base="$initrd" DEFAULT_INITRD="$KDUMP_BOOTDIR/$defaut_initrd_base" break @@ -682,7 +682,7 @@ prepare_kdump_bootinfo() kdump_initrd_base=${defaut_initrd_base}kdump fi - # Place kdump initrd in `/var/lib/kdump` if `KDUMP_BOOTDIR` not writable + # Place kdump initrd in $(/var/lib/kdump) if $(KDUMP_BOOTDIR) not writable if [[ ! -w "$KDUMP_BOOTDIR" ]];then var_target_initrd_dir="/var/lib/kdump" mkdir -p "$var_target_initrd_dir" @@ -719,7 +719,7 @@ prepare_cmdline() { local cmdline id - if [ -z "$1" ]; then + if [[ -z "$1" ]]; then cmdline=$(cat /proc/cmdline) else cmdline="$1" @@ -749,7 +749,7 @@ prepare_cmdline() cmdline="${cmdline} $3" id=$(get_bootcpu_apicid) - if [ ! -z ${id} ] ; then + if [[ ! -z ${id} ]] ; then cmdline=$(append_cmdline "${cmdline}" disable_cpu_apicid ${id}) fi @@ -794,7 +794,7 @@ get_recommend_size() last_unit="" start=${_ck_cmdline: :1} - if [ $mem_size -lt $start ]; then + if [[ $mem_size -lt $start ]]; then echo "0M" return fi @@ -804,10 +804,10 @@ get_recommend_size() recommend=$(echo $i | awk -F "-" '{ print $2 }' | awk -F ":" '{ print $2 }') size=${end: : -1} unit=${end: -1} - if [ $unit == 'T' ]; then + if [[ $unit == 'T' ]]; then let size=$size*1024 fi - if [ $mem_size -lt $size ]; then + if [[ $mem_size -lt $size ]]; then echo $recommend IFS="$OLDIFS" return @@ -817,28 +817,28 @@ get_recommend_size() } # return recommended size based on current system RAM size -# $1: kernel version, if not set, will defaults to `uname -r` +# $1: kernel version, if not set, will defaults to $(uname -r) kdump_get_arch_recommend_size() { local kernel=$1 arch - if ! [ -r "/proc/iomem" ] ; then + if ! [[ -r "/proc/iomem" ]] ; then echo "Error, can not access /proc/iomem." return 1 fi - [ -z "$kernel" ] && kernel=$(uname -r) + [[ -z "$kernel" ]] && kernel=$(uname -r) ck_cmdline=$(cat "/usr/lib/modules/$kernel/crashkernel.default" 2>/dev/null) - if [ -n "$ck_cmdline" ]; then + if [[ -n "$ck_cmdline" ]]; then ck_cmdline=${ck_cmdline#crashkernel=} else arch=$(lscpu | grep Architecture | awk -F ":" '{ print $2 }' | tr '[:lower:]' '[:upper:]') - if [ "$arch" = "X86_64" ] || [ "$arch" = "S390X" ]; then + if [[ "$arch" = "X86_64" ]] || [[ "$arch" = "S390X" ]]; then ck_cmdline="1G-4G:160M,4G-64G:192M,64G-1T:256M,1T-:512M" - elif [ "$arch" = "AARCH64" ]; then + elif [[ "$arch" = "AARCH64" ]]; then ck_cmdline="2G-:448M" - elif [ "$arch" = "PPC64LE" ]; then + elif [[ "$arch" = "PPC64LE" ]]; then if is_fadump_capable; then ck_cmdline="4G-16G:768M,16G-64G:1G,64G-128G:2G,128G-1T:4G,1T-2T:6G,2T-4T:12G,4T-8T:20G,8T-16T:36G,16T-32T:64G,32T-64T:128G,64T-:180G" else @@ -914,7 +914,7 @@ try_decompress() # "grep" that report the byte offset of the line instead of the pattern. # Try to find the header ($1) and decompress from here - for pos in `tr "$1\n$2" "\n$2=" < "$4" | grep -abo "^$2"` + for pos in $(tr "$1\n$2" "\n$2=" < "$4" | grep -abo "^$2") do if ! type -P $3 > /dev/null; then ddebug "Signiature detected but '$3' is missing, skip this decompressor"