rpms/kexec-tools
7
0
Fork 0
Code Issues Pull Requests Releases Activity
e8ae897595
kexec-tools/kdumpctl.8

73 lines
2.1 KiB
Groff
Raw Normal View History

kdumpctl: Add man page for kdumpctl kdumpctl is useful sometimes when users want to debug or setup ssh key authentication. So add a man page for it. Signed-off-by: Dangyi Liu <dliu@redhat.com> Acked-by: Dave Young <dyoung@redhat.com> Reviewed-by: Pratyush Anand <panand@redhat.com>
2015-08-18 04:59:32 +00:00
.TH KDUMPCTL 8 2015-07-13 kexec-tools
.SH NAME
kdumpctl \- control interface for kdump
.SH SYNOPSIS
.B kdumpctl
.I COMMAND
.SH DESCRIPTION
.B kdumpctl
is used to check or control the kdump service.
In most cases, you should use
.B systemctl
to start / stop / enable kdump service instead. However,
.B kdumpctl
add man documentation for kdumpctl get-default-crashkernel A few typos and grammar issues are fixed as well. Philipp Rudo <prudo@redhat.com> Signed-off-by: Coiby Xu <coxu@redhat.com>
2022-03-01 09:35:39 +00:00
provides more details for debugging and a helper to set up ssh key authentication.
kdumpctl: Add man page for kdumpctl kdumpctl is useful sometimes when users want to debug or setup ssh key authentication. So add a man page for it. Signed-off-by: Dangyi Liu <dliu@redhat.com> Acked-by: Dave Young <dyoung@redhat.com> Reviewed-by: Pratyush Anand <panand@redhat.com>
2015-08-18 04:59:32 +00:00
.SH COMMANDS
.TP
.I start
Start the service.
.TP
.I stop
Stop the service.
.TP
.I status
Prints the current status of kdump service.
add man documentation for kdumpctl get-default-crashkernel A few typos and grammar issues are fixed as well. Philipp Rudo <prudo@redhat.com> Signed-off-by: Coiby Xu <coxu@redhat.com>
2022-03-01 09:35:39 +00:00
It returns a non-zero value if kdump is not operational.
kdumpctl: Add man page for kdumpctl kdumpctl is useful sometimes when users want to debug or setup ssh key authentication. So add a man page for it. Signed-off-by: Dangyi Liu <dliu@redhat.com> Acked-by: Dave Young <dyoung@redhat.com> Reviewed-by: Pratyush Anand <panand@redhat.com>
2015-08-18 04:59:32 +00:00
.TP
.I restart
Is equal to
.I start; stop
.TP
Update man page for new kdumpctl command: reload / rebuild These two command are not documented, update the man page to let user know how to use them. Signed-off-by: Kairui Song <kasong@redhat.com> Acked-by: Dave Young <dyoung@redhat.com>
2019-03-13 12:28:59 +00:00
.I reload
add man documentation for kdumpctl get-default-crashkernel A few typos and grammar issues are fixed as well. Philipp Rudo <prudo@redhat.com> Signed-off-by: Coiby Xu <coxu@redhat.com>
2022-03-01 09:35:39 +00:00
reload the crash kernel image and initramfs without triggering a rebuild.
Update man page for new kdumpctl command: reload / rebuild These two command are not documented, update the man page to let user know how to use them. Signed-off-by: Kairui Song <kasong@redhat.com> Acked-by: Dave Young <dyoung@redhat.com>
2019-03-13 12:28:59 +00:00
.TP
.I rebuild
rebuild the crash kernel initramfs.
.TP
kdumpctl: Add man page for kdumpctl kdumpctl is useful sometimes when users want to debug or setup ssh key authentication. So add a man page for it. Signed-off-by: Dangyi Liu <dliu@redhat.com> Acked-by: Dave Young <dyoung@redhat.com> Reviewed-by: Pratyush Anand <panand@redhat.com>
2015-08-18 04:59:32 +00:00
.I propagate
Helps to setup key authentication for ssh storage since it's
impossible to use password authentication during kdump.
kdumpctl: add showmem cmd port from rhel, original patch is contributed by Minfei Huang: Using /sys to determines crashkernel actual size is confusing since there is no unit of measure. Add a new command "kdumpctl showmem" to show the reserved memory kindly. Signed-off-by: Pingfan Liu <piliu@redhat.com> Signed-off-by: Minfei Huang <mhuang@redhat.com> Acked-by: Bhupesh Sharma <bhsharma@redhat.com> Acked-by: Dave Young <dyoung@redhat.com>
2018-05-11 02:02:39 +00:00
.TP
.I showmem
add man documentation for kdumpctl get-default-crashkernel A few typos and grammar issues are fixed as well. Philipp Rudo <prudo@redhat.com> Signed-off-by: Coiby Xu <coxu@redhat.com>
2022-03-01 09:35:39 +00:00
Prints the size of reserved memory for the crash kernel in megabytes.
kdumpctl: Add kdumpctl estimate Add a rough esitimation support, currently, following memory usage are checked by this sub command: - System RAM - Kdump Initramfs size - Kdump Kernel image size - Kdump Kernel module size - Kdump userspace user and other runtime allocated memory (currently simply using a fixed value: 64M) - LUKS encryption memory usage The output of kdumpctl estimate looks like this: # kdumpctl estimate Reserved crashkernel: 256M Recommanded crashkernel: 160M Kernel image size: 47M Kernel modules size: 12M Initramfs size: 19M Runtime reservation: 64M Large modules: xfs: 1892352 nouveau: 2318336 And if the kdump target is encrypted: # kdumpctl estimate Encrypted kdump target requires extra memory, assuming using the keyslot with minimun memory requirement Reserved crashkernel: 256M Recommanded crashkernel: 655M Kernel image size: 47M Kernel modules size: 12M Initramfs size: 19M Runtime reservation: 64M LUKS required size: 512M Large modules: xfs: 1892352 nouveau: 2318336 WARNING: Current crashkernel size is lower than recommanded size 655M. The "Recommanded" value is calculated based on memory usages mentioned above, and will be adjusted accodingly to be no less than the value provided by kdump_get_arch_recommend_size. Signed-off-by: Kairui Song <kasong@redhat.com> Acked-by: Pingfan Liu <piliu@redhat.com>
2021-04-21 19:27:10 +00:00
.TP
.I estimate
add man documentation for kdumpctl get-default-crashkernel A few typos and grammar issues are fixed as well. Philipp Rudo <prudo@redhat.com> Signed-off-by: Coiby Xu <coxu@redhat.com>
2022-03-01 09:35:39 +00:00
Estimate a suitable crashkernel value for the current machine. This is a
best-effort estimate. It will print a recommended crashkernel value
based on the current kdump setup, and list some details of memory usage.
.TP
.I get-default-crashkernel
Return the default crashkernel value provided by kexec-tools.
kdumpctl: Add kdumpctl reset-crashkernel In newer kernel, crashkernel.default will contain the default crashkernel value of a kernel build. So introduce a new sub command to help user reset kernel crashkernel size to the default value. Signed-off-by: Kairui Song <kasong@redhat.com> Acked-by: Baoquan He <bhe@redhat.com>
2021-06-10 05:06:22 +00:00
.TP
rewrite reset_crashkernel to support fadump and to used by RPM scriptlet Rewrite kdumpctl reset-crashkernel KERNEL_PATH as kdumpctl reset-crashkernel [--fadump=[on|off|nocma]] [--kernel=path_to_kernel] [--reboot] This interface would reset a specific kernel to the default crashkernel value given the kernel path. And it also supports grubby's syntax so there are the following special cases, - if --kernel not specified, - use KDUMP_KERNELVER if it's defined in /etc/sysconfig/kdump - otherwise use current running kernel, i.e. `uname -r` - if --kernel=DEFAULT, the default boot kernel is chosen - if --kernel=ALL, all kernels would have its crashkernel reset to the default value and the /etc/default/grub is updated as well --fadump=[on|off|nocma] toggles fadump on/off for the kernel provided in KERNEL_PATH. If --fadump is omitted, the dump mode is determined by parsing the kernel command line for the kernel(s) to update. CoreOS/Atomic/Silverblue needs to be treated as a special case because, - "rpm-ostree kargs" is used to manage kernel command line parameters so --kernel doesn't make sense and there is no need to find current running kernel - "rpm-ostree kargs" itself would prompt the user to reboot the system after modify the kernel command line parameter - POWER is not supported so we can assume the dump mode is always kdump This interface will also be called by kexec-tools RPM scriptlets [1] to reset crashkernel. Note the support of crashkenrel.default is dropped. [1] https://docs.fedoraproject.org/en-US/packaging-guidelines/Scriptlets/ Reviewed-by: Pingfan Liu <piliu@redhat.com> Reviewed-by: Philipp Rudo <prudo@redhat.com> Signed-off-by: Coiby Xu <coxu@redhat.com>
2021-12-01 05:39:40 +00:00
.I reset-crashkernel [--kernel=path_to_kernel] [--reboot]
Reset crashkernel to default value recommended by kexec-tools. If no kernel
is specified, will reset KDUMP_KERNELVER if it's defined in /etc/sysconfig/kdump
add man documentation for kdumpctl get-default-crashkernel A few typos and grammar issues are fixed as well. Philipp Rudo <prudo@redhat.com> Signed-off-by: Coiby Xu <coxu@redhat.com>
2022-03-01 09:35:39 +00:00
or the current running kernel's crashkernel value if KDUMP_KERNELVER is empty. You can
rewrite reset_crashkernel to support fadump and to used by RPM scriptlet Rewrite kdumpctl reset-crashkernel KERNEL_PATH as kdumpctl reset-crashkernel [--fadump=[on|off|nocma]] [--kernel=path_to_kernel] [--reboot] This interface would reset a specific kernel to the default crashkernel value given the kernel path. And it also supports grubby's syntax so there are the following special cases, - if --kernel not specified, - use KDUMP_KERNELVER if it's defined in /etc/sysconfig/kdump - otherwise use current running kernel, i.e. `uname -r` - if --kernel=DEFAULT, the default boot kernel is chosen - if --kernel=ALL, all kernels would have its crashkernel reset to the default value and the /etc/default/grub is updated as well --fadump=[on|off|nocma] toggles fadump on/off for the kernel provided in KERNEL_PATH. If --fadump is omitted, the dump mode is determined by parsing the kernel command line for the kernel(s) to update. CoreOS/Atomic/Silverblue needs to be treated as a special case because, - "rpm-ostree kargs" is used to manage kernel command line parameters so --kernel doesn't make sense and there is no need to find current running kernel - "rpm-ostree kargs" itself would prompt the user to reboot the system after modify the kernel command line parameter - POWER is not supported so we can assume the dump mode is always kdump This interface will also be called by kexec-tools RPM scriptlets [1] to reset crashkernel. Note the support of crashkenrel.default is dropped. [1] https://docs.fedoraproject.org/en-US/packaging-guidelines/Scriptlets/ Reviewed-by: Pingfan Liu <piliu@redhat.com> Reviewed-by: Philipp Rudo <prudo@redhat.com> Signed-off-by: Coiby Xu <coxu@redhat.com>
2021-12-01 05:39:40 +00:00
also specify --kernel=ALL and --kernel=DEFAULT which have the same meaning as
grubby's kernel-path=ALL and kernel-path=DEFAULT. ppc64le supports FADump and
add man documentation for kdumpctl get-default-crashkernel A few typos and grammar issues are fixed as well. Philipp Rudo <prudo@redhat.com> Signed-off-by: Coiby Xu <coxu@redhat.com>
2022-03-01 09:35:39 +00:00
supports an additional [--fadump=[on|off|nocma]] parameter to toggle FADump
rewrite reset_crashkernel to support fadump and to used by RPM scriptlet Rewrite kdumpctl reset-crashkernel KERNEL_PATH as kdumpctl reset-crashkernel [--fadump=[on|off|nocma]] [--kernel=path_to_kernel] [--reboot] This interface would reset a specific kernel to the default crashkernel value given the kernel path. And it also supports grubby's syntax so there are the following special cases, - if --kernel not specified, - use KDUMP_KERNELVER if it's defined in /etc/sysconfig/kdump - otherwise use current running kernel, i.e. `uname -r` - if --kernel=DEFAULT, the default boot kernel is chosen - if --kernel=ALL, all kernels would have its crashkernel reset to the default value and the /etc/default/grub is updated as well --fadump=[on|off|nocma] toggles fadump on/off for the kernel provided in KERNEL_PATH. If --fadump is omitted, the dump mode is determined by parsing the kernel command line for the kernel(s) to update. CoreOS/Atomic/Silverblue needs to be treated as a special case because, - "rpm-ostree kargs" is used to manage kernel command line parameters so --kernel doesn't make sense and there is no need to find current running kernel - "rpm-ostree kargs" itself would prompt the user to reboot the system after modify the kernel command line parameter - POWER is not supported so we can assume the dump mode is always kdump This interface will also be called by kexec-tools RPM scriptlets [1] to reset crashkernel. Note the support of crashkenrel.default is dropped. [1] https://docs.fedoraproject.org/en-US/packaging-guidelines/Scriptlets/ Reviewed-by: Pingfan Liu <piliu@redhat.com> Reviewed-by: Philipp Rudo <prudo@redhat.com> Signed-off-by: Coiby Xu <coxu@redhat.com>
2021-12-01 05:39:40 +00:00
on/off.
kdumpctl: Add kdumpctl reset-crashkernel In newer kernel, crashkernel.default will contain the default crashkernel value of a kernel build. So introduce a new sub command to help user reset kernel crashkernel size to the default value. Signed-off-by: Kairui Song <kasong@redhat.com> Acked-by: Baoquan He <bhe@redhat.com>
2021-06-10 05:06:22 +00:00
rewrite reset_crashkernel to support fadump and to used by RPM scriptlet Rewrite kdumpctl reset-crashkernel KERNEL_PATH as kdumpctl reset-crashkernel [--fadump=[on|off|nocma]] [--kernel=path_to_kernel] [--reboot] This interface would reset a specific kernel to the default crashkernel value given the kernel path. And it also supports grubby's syntax so there are the following special cases, - if --kernel not specified, - use KDUMP_KERNELVER if it's defined in /etc/sysconfig/kdump - otherwise use current running kernel, i.e. `uname -r` - if --kernel=DEFAULT, the default boot kernel is chosen - if --kernel=ALL, all kernels would have its crashkernel reset to the default value and the /etc/default/grub is updated as well --fadump=[on|off|nocma] toggles fadump on/off for the kernel provided in KERNEL_PATH. If --fadump is omitted, the dump mode is determined by parsing the kernel command line for the kernel(s) to update. CoreOS/Atomic/Silverblue needs to be treated as a special case because, - "rpm-ostree kargs" is used to manage kernel command line parameters so --kernel doesn't make sense and there is no need to find current running kernel - "rpm-ostree kargs" itself would prompt the user to reboot the system after modify the kernel command line parameter - POWER is not supported so we can assume the dump mode is always kdump This interface will also be called by kexec-tools RPM scriptlets [1] to reset crashkernel. Note the support of crashkenrel.default is dropped. [1] https://docs.fedoraproject.org/en-US/packaging-guidelines/Scriptlets/ Reviewed-by: Pingfan Liu <piliu@redhat.com> Reviewed-by: Philipp Rudo <prudo@redhat.com> Signed-off-by: Coiby Xu <coxu@redhat.com>
2021-12-01 05:39:40 +00:00
Note: The memory requirements for kdump varies heavily depending on the
used hardware and system configuration. Thus the recommended
crashkernel might not work for your specific setup. Please test if
kdump works after resetting the crashkernel value.
kdumpctl: Add man page for kdumpctl kdumpctl is useful sometimes when users want to debug or setup ssh key authentication. So add a man page for it. Signed-off-by: Dangyi Liu <dliu@redhat.com> Acked-by: Dave Young <dyoung@redhat.com> Reviewed-by: Pratyush Anand <panand@redhat.com>
2015-08-18 04:59:32 +00:00
.SH "SEE ALSO"
.BR kdump.conf (5),
.BR mkdumprd (8)
Reference in New Issue Copy Permalink