kexec-tools/dracut-module-setup.sh

410 lines
12 KiB
Bash
Raw Normal View History

#!/bin/bash
. $dracutfunctions
check() {
[[ $debug ]] && set -x
#kdumpctl sets this explicitly
if [ -z "$IN_KDUMP" ] || [ ! -f /etc/kdump.conf ]
then
return 1
fi
return 0
}
depends() {
echo "base shutdown"
return 0
}
is_ssh_dump_target()
{
grep -q "^ssh[[:blank:]].*@" /etc/kdump.conf
}
kdump_to_udev_name() {
local dev="${1//\"/}"
case "$dev" in
UUID=*)
dev=`blkid -U "${dev#UUID=}"`
;;
LABEL=*)
dev=`blkid -L "${dev#LABEL=}"`
;;
esac
echo $(get_persistent_dev "$dev")
}
kdump_is_bridge() {
[ -d /sys/class/net/"$1"/bridge ]
}
kdump_is_bond() {
[ -d /sys/class/net/"$1"/bonding ]
}
kdump_is_team() {
[ -f /usr/bin/teamnl ] && teamnl $1 ports &> /dev/null
}
kdump_is_vlan() {
[ -f /proc/net/vlan/"$1" ]
}
# $1: netdev name
kdump_setup_dns() {
_dnsfile=${initdir}/etc/cmdline.d/42dns.conf
. /etc/sysconfig/network-scripts/ifcfg-$1
[ -n "$DNS1" ] && echo "nameserver=$DNS1" > "$_dnsfile"
[ -n "$DNS2" ] && echo "nameserver=$DNS2" >> "$_dnsfile"
}
#$1: netdev name
#checking /etc/sysconfig/network-scripts/ifcfg-$1,
#if it use static ip echo it, or echo null
kdump_static_ip() {
. /etc/sysconfig/network-scripts/ifcfg-$1
if [ -n "$IPADDR" ]; then
[ -z "$NETMASK" -a -n "$PREFIX" ] && \
NETMASK=$(ipcalc -m $IPADDR/$PREFIX | cut -d'=' -f2)
echo -n "${IPADDR}::${GATEWAY}:${NETMASK}::"
fi
}
kdump_get_mac_addr() {
echo `ip addr show $1 2>/dev/null|awk '/ether/{ print $2 }'`
}
#Bonding or team master modifies the mac address
#of its slaves, we should use perm address
kdump_get_perm_addr() {
local addr=$(ethtool -P $1 | sed -e 's/Permanent address: //')
if [ -z "$addr" ] || [ "$addr" = "00:00:00:00:00:00" ]
then
derror "Can't get the permanent address of $1"
else
echo "$addr"
fi
}
kdump_setup_bridge() {
local _netdev=$1
for _dev in `ls /sys/class/net/$_netdev/brif/`; do
if kdump_is_bond "$_dev"; then
kdump_setup_bond "$_dev"
elif kdump_is_team "$_dev"; then
kdump_setup_team "$_dev"
elif kdump_is_vlan "$_dev"; then
kdump_setup_vlan "$_dev"
else
echo -n " ifname=$_dev:$(kdump_get_mac_addr $_dev)" >> ${initdir}/etc/cmdline.d/41bridge.conf
fi
done
echo " bridge=$_netdev:$(cd /sys/class/net/$_netdev/brif/; echo * | sed -e 's/ /,/g')" >> ${initdir}/etc/cmdline.d/41bridge.conf
}
kdump_setup_bond() {
local _netdev=$1
for _dev in `cat /sys/class/net/$_netdev/bonding/slaves`; do
echo -n " ifname=$_dev:$(kdump_get_mac_addr $_dev)" >> ${initdir}/etc/cmdline.d/42bond.conf
done
echo -n " bond=$_netdev:$(sed -e 's/ /,/g' /sys/class/net/$_netdev/bonding/slaves)" >> ${initdir}/etc/cmdline.d/42bond.conf
# Get bond options specified in ifcfg
. /etc/sysconfig/network-scripts/ifcfg-$_netdev
bondoptions="$(echo :$BONDING_OPTS | sed 's/\s\+/,/')"
echo "$bondoptions" >> ${initdir}/etc/cmdline.d/42bond.conf
}
kdump_setup_team() {
local _netdev=$1
local slaves=""
for _dev in `teamnl $_netdev ports | awk -F':' '{print $2}'`; do
echo -n " ifname=$_dev:$(kdump_get_perm_addr $_dev)" >> ${initdir}/etc/cmdline.d/44team.conf
slaves+="$_dev,"
done
echo " team=$_netdev:$(echo $slaves | sed -e 's/,$//')" >> ${initdir}/etc/cmdline.d/44team.conf
#Buggy version teamdctl outputs to stderr!
#Try to use the latest version of teamd.
teamdctl "$_netdev" config dump > /tmp/$$-$_netdev.conf
if [ $? -ne 0 ]
then
derror "teamdctl failed."
exit 1
fi
inst_dir /etc/teamd
inst_simple /tmp/$$-$_netdev.conf "/etc/teamd/$_netdev.conf"
rm -f /tmp/$$-$_netdev.conf
}
kdump_setup_vlan() {
local _netdev=$1
local _phydev="$(awk '/^Device:/{print $2}' /proc/net/vlan/"$_netdev")"
local _netmac="$(kdump_get_mac_addr $_phydev)"
echo " vlan=$_netdev:$_phydev" > ${initdir}/etc/cmdline.d/43vlan.conf
#Just support vlan over bond, it is not easy
#to support all other complex setup
if kdump_is_bridge "$_phydev"; then
derror "Vlan over bridge is not supported!"
exit 1
elif kdump_is_team "$_phydev"; then
derror "Vlan over team is not supported!"
exit 1
elif kdump_is_bond "$_phydev"; then
kdump_setup_bond "$_phydev"
else
echo " vlan=$_netdev:$_phydev ifname=$_phydev:$_netmac" > ${initdir}/etc/cmdline.d/43vlan.conf
fi
}
# setup s390 znet cmdline
# $1: netdev name
kdump_setup_znet() {
local _options=""
. /etc/sysconfig/network-scripts/ifcfg-$1
for i in $OPTIONS; do
_options=${_options},$i
done
echo rd.znet=${NETTYPE},${SUBCHANNELS}${_options} > ${initdir}/etc/cmdline.d/30znet.conf
}
# Setup dracut to bringup a given network interface
kdump_setup_netdev() {
local _netdev=$1
local _static _proto
if [ "$(uname -m)" = "s390x" ]; then
kdump_setup_znet $_netdev
fi
_netmac=`ip addr show $_netdev 2>/dev/null|awk '/ether/{ print $2 }'`
_static=$(kdump_static_ip $_netdev)
if [ -n "$_static" ]; then
_proto=none
else
_proto=dhcp
fi
echo " ip=${_static}$_netdev:${_proto}" > ${initdir}/etc/cmdline.d/40ip.conf
if kdump_is_bridge "$_netdev"; then
kdump_setup_bridge "$_netdev"
elif kdump_is_bond "$_netdev"; then
kdump_setup_bond "$_netdev"
elif kdump_is_team "$_netdev"; then
kdump_setup_team "$_netdev"
elif kdump_is_vlan "$_netdev"; then
kdump_setup_vlan "$_netdev"
else
echo " ifname=$_netdev:$(kdump_get_mac_addr $_netdev)" >> ${initdir}/etc/cmdline.d/40ip.conf
fi
kdump_setup_dns "$_netdev"
}
#Function:kdump_install_net
#$1: config values of net line in kdump.conf
kdump_install_net() {
local _server _netdev
local config_val="$1"
_server=`echo $config_val | sed 's/.*@//' | cut -d':' -f1`
_need_dns=`echo $_server|grep "[a-zA-Z]"`
[ -n "$_need_dns" ] && _server=`getent hosts $_server|cut -d' ' -f1`
_netdev=`/sbin/ip route get to $_server 2>&1`
[ $? != 0 ] && echo "Bad kdump location: $config_val" && exit 1
#the field in the ip output changes if we go to another subnet
if [ -n "`echo $_netdev | grep via`" ]
then
# we are going to a different subnet
_netdev=`echo $_netdev|awk '{print $5;}'|head -n 1`
else
# we are on the same subnet
_netdev=`echo $_netdev|awk '{print $3}'|head -n 1`
fi
kdump_setup_netdev "${_netdev}"
#save netdev used for kdump as cmdline
echo "kdumpnic=${_netdev}" > ${initdir}/etc/cmdline.d/60kdumpnic.conf
echo "bootdev=${_netdev}" > ${initdir}/etc/cmdline.d/70bootdev.conf
}
#install kdump.conf and what user specifies in kdump.conf
kdump_install_conf() {
2012-01-25 08:58:35 +00:00
sed -ne '/^#/!p' /etc/kdump.conf > /tmp/$$-kdump.conf
while read config_opt config_val;
do
case "$config_opt" in
ext[234]|xfs|btrfs|minix|raw)
sed -i -e "s#$config_val#$(kdump_to_udev_name $config_val)#" /tmp/$$-kdump.conf
;;
ssh|nfs)
kdump_install_net "$config_val"
;;
kdump_pre|kdump_post|extra_bins)
dracut_install $config_val
;;
core_collector)
dracut_install "${config_val%% *}"
;;
esac
done < /etc/kdump.conf
inst "/tmp/$$-kdump.conf" "/etc/kdump.conf"
rm -f /tmp/$$-kdump.conf
}
kdump_iscsi_get_rec_val() {
local result
# The open-iscsi 742 release changed to using flat files in
# /var/lib/iscsi.
result=$(/sbin/iscsiadm --show -m session -r ${1} | grep "^${2} = ")
result=${result##* = }
echo $result
}
kdump_get_iscsi_initiator() {
local _initiator
local initiator_conf="/etc/iscsi/initiatorname.iscsi"
[ -f "$initiator_conf" ] || return 1
while read _initiator; do
[ -z "${_initiator%%#*}" ] && continue # Skip comment lines
case $_initiator in
InitiatorName=*)
initiator=${_initiator#InitiatorName=}
echo "rd.iscsi.initiator=${initiator}"
return 0;;
*) ;;
esac
done < ${initiator_conf}
return 1
}
# No ibft handling yet.
kdump_setup_iscsi_device() {
local path=$1
local tgt_name; local tgt_ipaddr;
local username; local password; local userpwd_str;
local username_in; local password_in; local userpwd_in_str;
local netdev
local idev
local netroot_str ; local initiator_str;
local netroot_conf="${initdir}/etc/cmdline.d/50iscsi.conf"
local initiator_conf="/etc/iscsi/initiatorname.iscsi"
dinfo "Found iscsi component $1"
# Check once before getting explicit values, so we can output a decent
# error message.
if ! /sbin/iscsiadm -m session -r ${path} >/dev/null ; then
derror "Unable to find iscsi record for $path"
return 1
fi
tgt_name=$(kdump_iscsi_get_rec_val ${path} "node.name")
tgt_ipaddr=$(kdump_iscsi_get_rec_val ${path} "node.conn\[0\].address")
# get and set username and password details
username=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.username")
[ "$username" == "<empty>" ] && username=""
password=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.password")
[ "$password" == "<empty>" ] && password=""
username_in=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.username_in")
[ -n "$username" ] && userpwd_str="$username:$password"
# get and set incoming username and password details
[ "$username_in" == "<empty>" ] && username_in=""
password_in=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.password_in")
[ "$password_in" == "<empty>" ] && password_in=""
[ -n "$username_in" ] && userpwd_in_str=":$username_in:$password_in"
netdev=$(/sbin/ip route get to ${tgt_ipaddr} | \
sed 's|.*dev \(.*\).*|\1|g' | awk '{ print $1; exit }')
kdump_setup_netdev $netdev
# prepare netroot= command line
# FIXME: IPV6 addresses require explicit [] around $tgt_ipaddr
# FIXME: Do we need to parse and set other parameters like protocol, port
# iscsi_iface_name, netdev_name, LUN etc.
netroot_str="netroot=iscsi:${userpwd_str}${userpwd_in_str}@$tgt_ipaddr::::$tgt_name"
[[ -f $netroot_conf ]] || touch $netroot_conf
# If netroot target does not exist already, append.
if ! grep -q $netroot_str $netroot_conf; then
echo $netroot_str >> $netroot_conf
dinfo "Appended $netroot_str to $netroot_conf"
fi
# Setup initator
initiator_str=$(kdump_get_iscsi_initiator)
[ $? -ne "0" ] && derror "Failed to get initiator name" && return 1
# If initiator details do not exist already, append.
if ! grep -q "$initiator_str" $netroot_conf; then
echo "$initiator_str" >> $netroot_conf
dinfo "Appended "$initiator_str" to $netroot_conf"
fi
}
kdump_check_iscsi_targets () {
# If our prerequisites are not met, fail anyways.
type -P iscsistart >/dev/null || return 1
kdump_check_setup_iscsi() (
local _dev
_dev=$1
[[ -L /sys/dev/block/$_dev ]] || return
cd "$(readlink -f /sys/dev/block/$_dev)"
until [[ -d sys || -d iscsi_session ]]; do
cd ..
done
[[ -d iscsi_session ]] && kdump_setup_iscsi_device "$PWD"
)
[[ $hostonly ]] || [[ $mount_needs ]] && {
for_each_host_dev_and_slaves_all kdump_check_setup_iscsi
}
}
install() {
kdump_install_conf
if is_ssh_dump_target; then
dracut_install /var/lib/random-seed || exit $?
fi
inst "$moddir/monitor_dd_progress" "/kdumpscripts/monitor_dd_progress"
chmod +x ${initdir}/kdumpscripts/monitor_dd_progress
inst "/bin/dd" "/bin/dd"
inst "/bin/tail" "/bin/tail"
inst "/bin/date" "/bin/date"
inst "/bin/sync" "/bin/sync"
inst "/bin/cut" "/bin/cut"
inst "/sbin/makedumpfile" "/sbin/makedumpfile"
inst "/sbin/vmcore-dmesg" "/sbin/vmcore-dmesg"
inst_hook pre-pivot 9999 "$moddir/kdump.sh"
# Check for all the devices and if any device is iscsi, bring up iscsi
# target. Ideally all this should be pushed into dracut iscsi module
# at some point of time.
kdump_check_iscsi_targets
}