kexec-tools/kdumpctl

#! /bin/sh
KEXEC=/sbin/kexec

KDUMP_KERNELVER=""
KDUMP_COMMANDLINE=""
KEXEC_ARGS=""
KDUMP_CONFIG_FILE="/etc/kdump.conf"
MKDUMPRD="/sbin/mkdumprd -f"
SAVE_PATH=/var/crash
SSH_KEY_LOCATION="/root/.ssh/kdump_id_rsa"
DUMP_TARGET=""
TARGET_INITRD=""
FADUMP_ENABLED_SYS_NODE="/sys/kernel/fadump_enabled"
FADUMP_REGISTER_SYS_NODE="/sys/kernel/fadump_registered"
#kdump shall be the default dump mode
DEFAULT_DUMP_MODE="kdump"
image_time=0

. /lib/kdump/kdump-lib.sh

standard_kexec_args="-p"

# Some default values in case /etc/sysconfig/kdump doesn't include
KDUMP_COMMANDLINE_REMOVE="hugepages hugepagesz slub_debug"

if [ -f /etc/sysconfig/kdump ]; then
	. /etc/sysconfig/kdump
fi

single_instance_lock()
{
	local rc timeout=5

	exec 9>/var/lock/kdump

	flock -n 9
	rc=$?

	while [ $rc -ne 0 ]; do
		echo "Another app is currently holding the kdump lock; waiting for it to exit..."
		flock -w $timeout 9
		rc=$?
	done
}

determine_dump_mode()
{
	# Check if firmware-assisted dump is enabled
	# if yes, set the dump mode as fadump
	if is_fadump_capable; then
		echo "Dump mode is fadump"
		DEFAULT_DUMP_MODE="fadump"
	fi
}

# remove_cmdline_param <kernel cmdline> <param1> [<param2>] ... [<paramN>]
# Remove a list of kernel parameters from a given kernel cmdline and print the result.
# For each "arg" in the removing params list, "arg" and "arg=xxx" will be removed if exists.
remove_cmdline_param()
{
	local cmdline=$1
	shift

	for arg in $@; do
		cmdline=`echo $cmdline | \
			 sed -e "s/\b$arg=[^ ]*\b//g" \
			     -e "s/\b$arg\b//g" \
			     -e "s/\s\+/ /g"`
	done
	echo $cmdline
}

#
# This function returns the "initial apicid" of the
# boot cpu (cpu 0) if present.
#
get_bootcpu_initial_apicid()
{
    awk '							\
	BEGIN { CPU = "-1"; }					\
	$1=="processor" && $2==":"	{ CPU = $NF; }		\
	CPU=="0" && /initial apicid/	{ print $NF; }		\
	'							\
	/proc/cpuinfo
}

#
# This function appends argument "$2=$3" to string ($1) if not already present.
#
append_cmdline()
{
	local cmdline=$1
	local newstr=${cmdline/$2/""}

	# unchanged str implies argument wasn't there
	if [ "$cmdline" == "$newstr" ]; then
		cmdline="${cmdline} ${2}=${3}"
	fi

	echo $cmdline
}

# This function performs a series of edits on the command line
prepare_cmdline()
{
	local cmdline;
	if [ -z "$KDUMP_COMMANDLINE" ]; then
		cmdline=`cat /proc/cmdline`
	else
		cmdline=${KDUMP_COMMANDLINE}
	fi
	# These params should always be removed
	cmdline=`remove_cmdline_param "$cmdline" crashkernel panic_on_warn`
	# These params can be removed configurably
	cmdline=`remove_cmdline_param "$cmdline" ${KDUMP_COMMANDLINE_REMOVE}`

	cmdline="${cmdline} ${KDUMP_COMMANDLINE_APPEND}"

	local id=`get_bootcpu_initial_apicid`
	if [ ! -z ${id} ] ; then
		cmdline=`append_cmdline "${cmdline}" disable_cpu_apicid ${id}`
	fi

	echo $cmdline
}


save_core()
{
	coredir="/var/crash/`date +"%Y-%m-%d-%H:%M"`"

	mkdir -p $coredir
	cp --sparse=always /proc/vmcore $coredir/vmcore-incomplete
	if [ $? == 0 ]; then
		mv $coredir/vmcore-incomplete $coredir/vmcore
		echo "saved a vmcore to $coredir"
	else
		echo "failed to save a vmcore to $coredir" >&2
	fi

	# pass the dmesg to Abrt tool if exists, in order
	# to collect the kernel oops message.
	# https://fedorahosted.org/abrt/
	if [ -x /usr/bin/dumpoops ]; then
		makedumpfile --dump-dmesg $coredir/vmcore $coredir/dmesg >/dev/null 2>&1
		dumpoops -d $coredir/dmesg >/dev/null 2>&1
		if [ $? == 0 ]; then
			echo "kernel oops has been collected by abrt tool"
		fi
	fi
}

rebuild_fadump_initrd()
{
	local target_initrd_tmp

	# backup fadump initrd for reference before replacing it
	backup_initrd

	# this file tells the initrd is fadump enabled
	touch /tmp/fadump.initramfs
	target_initrd_tmp="$TARGET_INITRD.tmp"
	$MKDUMPRD $target_initrd_tmp --rebuild $TARGET_INITRD --kver $kdump_kver \
		-i /tmp/fadump.initramfs /etc/fadump.initramfs
	if [ $? != 0 ]; then
		echo "mkdumprd: failed to rebuild initrd with fadump support" >&2
		rm -f /tmp/fadump.initramfs
		return 1
	fi
	rm -f /tmp/fadump.initramfs

	# updating fadump initrd
	mv $target_initrd_tmp $TARGET_INITRD
	sync

	return 0
}

rebuild_kdump_initrd()
{
	$MKDUMPRD $TARGET_INITRD $kdump_kver
	if [ $? != 0 ]; then
		echo "mkdumprd: failed to make kdump initrd" >&2
		return 1
	fi

	return 0
}

rebuild_initrd()
{
	if [ $DEFAULT_DUMP_MODE == "fadump" ]; then
		rebuild_fadump_initrd
	else
		rebuild_kdump_initrd
	fi

	return $?
}

#$1: the files to be checked with IFS=' '
check_exist()
{
	for file in $1; do
		if [ ! -f "$file" ]; then
			echo -n "Error: $file not found."; echo
			return 1
		fi
	done
}

#$1: the files to be checked with IFS=' '
check_executable()
{
	for file in $1; do
		if [ ! -x "$file" ]; then
			echo -n "Error: $file is not executable."; echo
			return 1
		fi
	done
}

backup_initrd()
{
	local target_initrd_bak

	# Check if backup initrd is already present.
	target_initrd_bak="$TARGET_INITRD.bak"
	if [ ! -e $target_initrd_bak ];then
		echo "Backing up $TARGET_INITRD"
		cp $TARGET_INITRD $target_initrd_bak
	fi
}

check_config()
{
	local nr

	nr=$(awk 'BEGIN{cnt=0} /^raw|^ssh[[:blank:]]|^nfs|^ext[234]|^xfs|^btrfs|^minix/{cnt++} END{print cnt}' $KDUMP_CONFIG_FILE)
	[ $nr -gt 1 ] && {
		echo "More than one dump targets specified."
		return 1
	}

	while read config_opt config_val; do
		# remove inline comments after the end of a directive.
		config_val=$(strip_comments $config_val)
		case "$config_opt" in
		\#* | "")
			;;
		raw|ext2|ext3|ext4|minix|btrfs|xfs|nfs|ssh|sshkey|path|core_collector|kdump_post|kdump_pre|extra_bins|extra_modules|default|force_rebuild|dracut_args|fence_kdump_args|fence_kdump_nodes)
			[ -z "$config_val" ] && {
				echo "Invalid kdump config value for option $config_opt."
				return 1;
			}
			;;
		net|options|link_delay|disk_timeout|debug_mem_level|blacklist)
			echo "Deprecated kdump config option: $config_opt. Refer to kdump.conf manpage for alternatives."
			return 1
			;;
		*)
			echo "Invalid kdump config option $config_opt"
			return 1;
			;;
		esac
	done < $KDUMP_CONFIG_FILE

	check_default_config || return 1

	check_fence_kdump_config || return 1

	return 0
}

# get_pcs_cluster_modified_files <image timestamp>
# return list of modified file for fence_kdump modified in Pacemaker cluster
get_pcs_cluster_modified_files()
{
	local time_stamp
	local modified_files

	is_generic_fence_kdump && return 1
	is_pcs_fence_kdump || return 1

	time_stamp=`pcs cluster cib | xmllint --xpath 'string(/cib/@cib-last-written)' - | \
		xargs -0 date +%s --date`

	if [ -n $time_stamp -a $time_stamp -gt $image_time ]; then
		modified_files="cluster-cib"
	fi

	if [ -f $FENCE_KDUMP_CONFIG_FILE ]; then
		time_stamp=`stat -c "%Y" $FENCE_KDUMP_CONFIG_FILE`
		if [ "$time_stamp" -gt "$image_time" ]; then
			modified_files="$modified_files $FENCE_KDUMP_CONFIG_FILE"
		fi
	fi

	echo $modified_files
}

check_boot_dir()
{
	#If user specify a boot dir for kdump kernel, let's use it. Otherwise
	#check whether it's a atomic host. If yes parse the subdirectory under
	#/boot; If not just find it under /boot.
	[ -n "$KDUMP_BOOTDIR" ] && return

	if ! is_atomic || [ "$(uname -m)" = "s390x" ]; then
		KDUMP_BOOTDIR="/boot"
	else
		eval $(cat /proc/cmdline| grep "BOOT_IMAGE" | cut -d' ' -f1)
		KDUMP_BOOTDIR="/boot"$(dirname $BOOT_IMAGE)
	fi
}

setup_target_initrd()
{
	if [ $DEFAULT_DUMP_MODE == "fadump" ]; then
		TARGET_INITRD="${KDUMP_BOOTDIR}/initramfs-${kdump_kver}.img"
		if [ ! -s "$TARGET_INITRD" ]; then
			echo "Error: No initrd found to rebuild!"
			return 1
		fi
	else
		TARGET_INITRD="${KDUMP_BOOTDIR}/initramfs-${kdump_kver}kdump.img"
	fi
}

check_files_modified()
{
	local modified_files=""

	#also rebuild when Pacemaker cluster conf is changed and fence kdump is enabled.
	modified_files=$(get_pcs_cluster_modified_files)

	EXTRA_BINS=`grep ^kdump_post $KDUMP_CONFIG_FILE | cut -d\  -f2`
	CHECK_FILES=`grep ^kdump_pre $KDUMP_CONFIG_FILE | cut -d\  -f2`
	EXTRA_BINS="$EXTRA_BINS $CHECK_FILES"
	CHECK_FILES=`grep ^extra_bins $KDUMP_CONFIG_FILE | cut -d\  -f2-`
	EXTRA_BINS="$EXTRA_BINS $CHECK_FILES"
	files="$KDUMP_CONFIG_FILE $kdump_kernel $EXTRA_BINS /etc/fstab"

	check_exist "$files" && check_executable "$EXTRA_BINS"
	[ $? -ne 0 ] && return 2

	for file in $files; do
		time_stamp=`stat -c "%Y" $file`
		if [ "$time_stamp" -gt "$image_time" ]; then
			modified_files="$modified_files $file"
		fi
	done
	if [ -n "$modified_files" ]; then
		echo "Detected change(s) in the following file(s):"
		echo -n "  "; echo "$modified_files" | sed 's/\s/\n  /g'
		return 1
	fi

	return 0
}

check_dump_fs_modified()
{
	local _old_dev _old_mntpoint _old_fstype
	local _new_dev _new_mntpoint _new_fstype
	local _target _path _dracut_args

	# No need to check in case of raw target.
	# Currently we do not check also if ssh/nfs target is specified
	if is_ssh_dump_target || is_nfs_dump_target || is_raw_dump_target; then
		return 0
	fi

	_target=$(get_user_configured_dump_disk)

	if [[ -n "$_target" ]]; then
		_target=$(to_dev_name $_target)
		_new_fstype=$(blkid $_target | awk -F"TYPE=" '{print $2}' | cut -d '"' -f 2)
	else
		_path=$(get_save_path)
		set -- $(df -T $_path 2>/dev/null | tail -1 | awk '{ print $1, $2}')
		_target=$(to_dev_name $1)
		_new_fstype=$2
		if [[ -z "$_target" || -z "$_new_fstype" ]];then
			echo "Dump path $_path does not exist"
			return 2
		fi
	fi

	if [[ $(expr substr $_new_fstype 1 3) = "nfs" ]];then
		_new_dev=$_target
	else
		_new_dev=$(kdump_get_persistent_dev $_target $_new_fstype)
		if ! findmnt $_target >/dev/null; then
			echo "Dump target $_target is probably not mounted."
			return 2
		fi
	fi

        if ! findmnt $_target >/dev/null; then
            echo "Dump target $_target is probably not mounted."
	    return 2
        fi
	_new_mntpoint="/kdumproot/$(get_mntpoint_from_target $_target)"

	_dracut_args=$(lsinitrd $TARGET_INITRD | grep "^Arguments:" | head -1)
	if [[ -z "$_dracut_args" ]];then
		echo "Warning: No dracut arguments found in initrd"
		return 0
	fi

	# if --mount argument present then match old and new target, mount
	# point and file system. If any of them mismatches then rebuild
	echo $_dracut_args | grep "\-\-mount" &> /dev/null
	if [[ $? -eq 0 ]];then
		set -- $(echo $_dracut_args | awk -F "--mount '" '{print $2}' | cut -d' ' -f1,2,3)
		_old_dev=$1
		_old_mntpoint=$2
		_old_fstype=$3
		[[ $_new_dev = $_old_dev && $_new_mntpoint = $_old_mntpoint && $_new_fstype = $_old_fstype ]] && return 0
	# otherwise rebuild if target device is not a root device
	else
		[[ "$_target" = "$(get_root_fs_device)" ]] && return 0
	fi

	echo "Detected change in File System"
	return 1
}

check_wdt_modified()
{
	is_wdt_mod_omitted
	[[ $? -eq 0 ]] && return 0
	[[ -d /sys/class/watchdog/ ]] || return 0

	for dir in /sys/class/watchdog/*; do
		[[ -d "$dir" ]] || continue
		[[ -f "$dir/state" ]] || continue
		wdtdrv=$(< "$dir/device/modalias")
		wdtdrv=$(modinfo $wdtdrv | grep filename | awk -F"kernel/" '{print $2}')
		active=$(< "$dir/state")
		# rebuild when:
		# module for this watchdog is not found and watchdog is active
		# module for this watchdog is found and watchdog is inactive
		lsinitrd $TARGET_INITRD | grep $wdtdrv &> /dev/null
		if [ $? -ne 0 ]; then
			[[ "$active" =  "active" ]] && return 1
		else
			[[ "$active" =  "inactive" ]] && return 1
		fi
	done

	# check if watchdog kernel module unloaded.
	loaded_mods=$(lsinitrd $TARGET_INITRD -f etc/cmdline.d/00-watchdog.conf)
	[[ -n $loaded_mods ]] && loaded_mods=$(echo $loaded_mods | awk -F"rd.driver.pre=" '{print $2}' | sed "s/,/ /g")
	for mod in $loaded_mods ; do
	       lsmod | grep $mod &> /dev/null
	       [[ $? != 0 ]] && return 1
        done

	return 0
}

# returns 0 if system is not modified
# returns 1 if system is modified
# returns 2 if system modification is invalid
check_system_modified()
{
	local ret

	[[ -f $TARGET_INITRD ]] || return 1

	check_files_modified
	ret=$?
	if [ $ret -ne 0 ]; then
		return $ret
	fi

	check_dump_fs_modified
	ret=$?
	if [ $ret -ne 0 ]; then
		return $ret
	fi

	check_wdt_modified
	if [ $? -ne 0 ]; then
		echo "Detected change in watchdog state"
		return 1
	fi

	return 0
}

check_rebuild()
{
	local extra_modules
	local _force_rebuild force_rebuild="0"
	local ret system_modified="0"
	local initramfs_has_fadump

	check_boot_dir

	if [ -z "$KDUMP_KERNELVER" ]; then
		kdump_kver=`uname -r`
	else
		kdump_kver=$KDUMP_KERNELVER
	fi

	kdump_kernel="${KDUMP_BOOTDIR}/${KDUMP_IMG}-${kdump_kver}${KDUMP_IMG_EXT}"
	setup_target_initrd
	if [ $? -ne 0 ]; then
		return 1
	fi

	_force_rebuild=`grep ^force_rebuild $KDUMP_CONFIG_FILE 2>/dev/null`
	if [ $? -eq 0 ]; then
		force_rebuild=`echo $_force_rebuild | cut -d' '  -f2`
		if [ "$force_rebuild" != "0" ] && [ "$force_rebuild" != "1" ];then
			echo "Error: force_rebuild value is invalid"
			return 1
		fi
	fi

	#will rebuild every time if extra_modules are specified
	extra_modules=`grep ^extra_modules $KDUMP_CONFIG_FILE`
	[ -n "$extra_modules" ] && force_rebuild="1"

	#check to see if dependent files has been modified
	#since last build of the image file
	if [ -f $TARGET_INITRD ]; then
		image_time=`stat -c "%Y" $TARGET_INITRD 2>/dev/null`
	fi

	#also rebuild when Pacemaker cluster conf is changed and fence kdump is enabled.
	modified_files=$(get_pcs_cluster_modified_files $image_time)

	EXTRA_BINS=`grep ^kdump_post $KDUMP_CONFIG_FILE | cut -d\  -f2`
	CHECK_FILES=`grep ^kdump_pre $KDUMP_CONFIG_FILE | cut -d\  -f2`
	EXTRA_BINS="$EXTRA_BINS $CHECK_FILES"
	CHECK_FILES=`grep ^extra_bins $KDUMP_CONFIG_FILE | cut -d\  -f2-`
	EXTRA_BINS="$EXTRA_BINS $CHECK_FILES"
	files="$KDUMP_CONFIG_FILE $kdump_kernel $EXTRA_BINS /etc/fstab"

	check_exist "$files" && check_executable "$EXTRA_BINS"
	[ $? -ne 0 ] && return 1

	for file in $files; do
		time_stamp=`stat -c "%Y" $file`
		if [ "$time_stamp" -gt "$image_time" ]; then
			modified_files="$modified_files $file"
		fi
	done

	check_system_modified
	ret=$?
	if [ $ret -eq 2 ]; then
		return 1
	elif [ $ret -eq 1 ];then
		system_modified="1"
	fi

	#check if target initrd has fadump support
	if [ "$DEFAULT_DUMP_MODE" = "fadump" ] && [ -f "$TARGET_INITRD" ]; then
		initramfs_has_fadump=`lsinitrd -m $TARGET_INITRD | grep ^kdumpbase$ | wc -l`
	fi

	if [ $image_time -eq 0 ]; then
		echo  -n "No kdump initial ramdisk found."; echo
	elif [ $DEFAULT_DUMP_MODE == "fadump" ] && [ "$initramfs_has_fadump" -eq "0" ]; then
		echo "$TARGET_INITRD has no fadump support"
	elif [ "$force_rebuild" != "0" ]; then
		echo -n "Force rebuild $TARGET_INITRD"; echo
	elif [ "$system_modified" != "0" ]; then
		:
	else
		return 0
	fi

	if [[ ! -w "$KDUMP_BOOTDIR" ]];then
		echo "$KDUMP_BOOTDIR does not have write permission. Can not rebuild $TARGET_INITRD"
		return 1
	fi

	echo "Rebuilding $TARGET_INITRD"
	rebuild_initrd
	return $?
}

# This function check iomem and determines if we have more than
# 4GB of ram available. Returns 1 if we do, 0 if we dont
need_64bit_headers()
{
	return `tail -n 1 /proc/iomem | awk '{ split ($1, r, "-"); \
	print (strtonum("0x" r[2]) > strtonum("0xffffffff")); }'`
}

# Load the kdump kerel specified in /etc/sysconfig/kdump
# If none is specified, try to load a kdump kernel with the same version
# as the currently running kernel.
load_kdump()
{
	ARCH=`uname -m`
	if [ "$ARCH" == "i686" -o "$ARCH" == "i386" ]
	then

		need_64bit_headers
		if [ $? == 1 ]
		then
			FOUND_ELF_ARGS=`echo $KEXEC_ARGS | grep elf32-core-headers`
			if [ -n "$FOUND_ELF_ARGS" ]
			then
				echo -n "Warning: elf32-core-headers overrides correct elf64 setting"
				echo
			else	
				KEXEC_ARGS="$KEXEC_ARGS --elf64-core-headers"
			fi
		else
			FOUND_ELF_ARGS=`echo $KEXEC_ARGS | grep elf64-core-headers`
			if [ -z "$FOUND_ELF_ARGS" ]
			then
				KEXEC_ARGS="$KEXEC_ARGS --elf32-core-headers"
			fi
		fi
	fi

	KDUMP_COMMANDLINE=`prepare_cmdline`

	# For secureboot enabled machines, use new kexec file based syscall.
	# Old syscall will always fail as it does not have capability to
	# to kernel signature verification.
	if is_secure_boot_enforced; then
		echo "Secure Boot is enabled. Using kexec file based syscall."
		KEXEC_ARGS="$KEXEC_ARGS -s"
	fi

	$KEXEC $KEXEC_ARGS $standard_kexec_args \
		--command-line="$KDUMP_COMMANDLINE" \
		--initrd=$TARGET_INITRD $kdump_kernel
	if [ $? == 0 ]; then
		echo "kexec: loaded kdump kernel"
		return 0
	else
		echo "kexec: failed to load kdump kernel" >&2
		return 1
	fi
}

check_ssh_config()
{
	while read config_opt config_val; do
		# remove inline comments after the end of a directive.
		config_val=$(strip_comments $config_val)
		case "$config_opt" in
		sshkey)
			if [ -f "$config_val" ]; then
				# canonicalize the path
				SSH_KEY_LOCATION=$(/usr/bin/readlink -m $config_val)
			else
				echo "WARNING: '$config_val' doesn't exist, using default value '$SSH_KEY_LOCATION'"
			fi
			;;
		path)
			SAVE_PATH=$config_val
			;;
		ssh)
			DUMP_TARGET=$config_val
			;;
		*)
			;;
		esac
	done < $KDUMP_CONFIG_FILE

	#make sure they've configured kdump.conf for ssh dumps
	local SSH_TARGET=`echo -n $DUMP_TARGET | sed -n '/.*@/p'`
	if [ -z "$SSH_TARGET" ]; then
		return 1
	fi
	return 0
}

check_ssh_target()
{
	local _ret
	ssh -q -i $SSH_KEY_LOCATION -o BatchMode=yes $DUMP_TARGET mkdir -p $SAVE_PATH
	_ret=$?
	if [ $_ret -ne 0 ]; then
		echo "Could not create $DUMP_TARGET:$SAVE_PATH, you probably need to run \"kdumpctl propagate\""  >&2
		return 1
	fi
	return 0
}

propagate_ssh_key()
{
	check_ssh_config
	if [ $? -ne 0 ]; then
		echo "No ssh config specified in $KDUMP_CONFIG_FILE.  Can't propagate" >&2
		exit 1
	fi

	local KEYFILE=$SSH_KEY_LOCATION
	local errmsg="Failed to propagate ssh key"

	#Check to see if we already created key, if not, create it.
	if [ -f $KEYFILE ]; then
		echo "Using existing keys..."
	else
		echo -n "Generating new ssh keys... "
		/usr/bin/ssh-keygen -t rsa -f $KEYFILE -N "" 2>&1 > /dev/null
		echo "done."
	fi

	#now find the target ssh user and server to contact.
	SSH_USER=`echo $DUMP_TARGET | cut -d\  -f2 | cut -d@ -f1`
	SSH_SERVER=`echo $DUMP_TARGET | sed -e's/\(.*@\)\(.*$\)/\2/'`

	#now send the found key to the found server
	ssh-copy-id -i $KEYFILE $SSH_USER@$SSH_SERVER
	RET=$?
	if [ $RET == 0 ]; then
		echo $KEYFILE has been added to ~$SSH_USER/.ssh/authorized_keys on $SSH_SERVER
		return 0
	else
		echo $errmsg, $KEYFILE failed in transfer to $SSH_SERVER  >&2
		exit 1
	fi
}

is_fadump_capable()
{
	# Check if firmware-assisted dump is enabled
	# if no, fallback to kdump check
	if [ -f $FADUMP_ENABLED_SYS_NODE ]; then
		rc=`cat $FADUMP_ENABLED_SYS_NODE`
		[ $rc -eq 1 ] && return 0
	fi
	return 1
}

check_current_fadump_status()
{
	# Check if firmware-assisted dump has been registered.
	rc=`cat $FADUMP_REGISTER_SYS_NODE`
	[ $rc -eq 1 ] && return 0
	return 1
}

check_current_kdump_status()
{
	rc=`cat /sys/kernel/kexec_crash_loaded`
	if [ $rc == 1 ]; then
		return 0
	else
		return 1
	fi
}

check_current_status()
{
	if [ $DEFAULT_DUMP_MODE == "fadump" ]; then
		check_current_fadump_status
	else
		check_current_kdump_status
	fi

	return $?
}

save_raw()
{
	local kdump_dir
	local raw_target

	raw_target=$(awk '$1 ~ /^raw$/ { print $2; }' $KDUMP_CONFIG_FILE)
	[ -z "$raw_target" ] && return 0
	[ -b "$raw_target" ] || {
		echo "raw partition $raw_target not found"
		return 1
	}
	kdump_dir=`grep ^path $KDUMP_CONFIG_FILE | cut -d' '  -f2-`
	if [ -z "${kdump_dir}" ]; then
		coredir="/var/crash/`date +"%Y-%m-%d-%H:%M"`"
	else
		coredir="${kdump_dir}/`date +"%Y-%m-%d-%H:%M"`"
	fi

	mkdir -p "$coredir"
	[ -d "$coredir" ] || {
		echo "failed to create $coredir"
		return 1
	}
	if makedumpfile -R $coredir/vmcore <$raw_target >/dev/null 2>&1; then
		# dump found
		echo "Dump saved to $coredir/vmcore"
		# wipe makedumpfile header
		dd if=/dev/zero of=$raw_target bs=1b count=1 2>/dev/null
	else
		rm -rf "$coredir"
	fi

	return 0
}

get_save_path()
{
	local _save_path=$(grep "^path" /etc/kdump.conf|awk '{print $2}')
	if [ -z "$_save_path" ]; then
		_save_path="/var/crash"
	fi

	echo $_save_path
}

is_dump_target_configured()
{
	local _target

	_target=$(egrep "^ext[234]|^xfs|^btrfs|^minix|^raw|^ssh|^nfs" /etc/kdump.conf)

	[ -n "$_target" ]
}

local_fs_dump_target()
{
	local _target

	_target=$(egrep "^ext[234]|^xfs|^btrfs|^minix" /etc/kdump.conf)
	if [ $? -eq 0 ]; then
		echo $_target|awk '{print $2}'
	fi
}

path_to_be_relabeled()
{
	local _path _target _mnt="/" _rmnt

	if is_dump_target_configured; then
		_target=$(local_fs_dump_target)
		if [[ -n "$_target" ]]; then
			_mnt=$(findmnt -k -f -n -r -o TARGET $_target)
			if [ -z "$_mnt" ]; then
				return
			fi
		else
			return
		fi
	fi

	_path=$(get_save_path)
	# if $_path is masked by other mount, we will not relabel it.
	_rmnt=$(df $_mnt/$_path 2>/dev/null | tail -1 | awk '{ print $NF }')
	if [ "$_rmnt" == "$_mnt" ]; then
		echo $_mnt/$_path
	fi
}

selinux_relabel()
{
	local _path _i _attr

	_path=$(path_to_be_relabeled)
	if [ -z "$_path" ] || ! [ -d "$_path" ] ; then
		return
	fi

	for _i in $(find $_path); do
		_attr=$(getfattr -m "security.selinux" $_i 2>/dev/null)
		if [ -z "$_attr" ]; then
			restorecon $_i;
		fi
	done
}

# Check if secure boot is being enforced.
#
# Per Peter Jones, we need check efivar SecureBoot-$(the UUID) and
# SetupMode-$(the UUID), they are both 5 bytes binary data. The first four
# bytes are the attributes associated with the variable and can safely be
# ignored, the last bytes are one-byte true-or-false variables. If SecureBoot
# is 1 and SetupMode is 0, then secure boot is being enforced.
#
# Assume efivars is mounted at /sys/firmware/efi/efivars.
is_secure_boot_enforced()
{
	local secure_boot_file setup_mode_file
	local secure_boot_byte setup_mode_byte

	secure_boot_file=$(find /sys/firmware/efi/efivars -name SecureBoot-* 2>/dev/null)
	setup_mode_file=$(find /sys/firmware/efi/efivars -name SetupMode-* 2>/dev/null)

	if [ -f "$secure_boot_file" ] && [ -f "$setup_mode_file" ]; then
		secure_boot_byte=$(hexdump -v -e '/1 "%d\ "' $secure_boot_file|cut -d' ' -f 5)
		setup_mode_byte=$(hexdump -v -e '/1 "%d\ "' $setup_mode_file|cut -d' ' -f 5)

		if [ "$secure_boot_byte" = "1" ] && [ "$setup_mode_byte" = "0" ]; then
			return 0
		fi
	fi

	return 1
}

check_crash_mem_reserved()
{
	MEM_RESERVED=$(cat /sys/kernel/kexec_crash_size)
	if [ $MEM_RESERVED -eq 0 ]
	then
		echo "No memory reserved for crash kernel." >&2
		return 1
	fi

	return 0
}

check_kdump_feasibility()
{
	if [ ! -e /sys/kernel/kexec_crash_loaded ]; then
		echo "Kdump is not supported on this kernel"
		return 1
	fi
	check_crash_mem_reserved
	return $?
}

check_fence_kdump_config()
{
	local hostname=`hostname`
	local nodes=$(get_option_value "fence_kdump_nodes")

	for node in $nodes; do
		if [ "$node" = "$hostname" ]; then
			echo "Option fence_kdump_nodes cannot contain $hostname"
			return 1
		fi
	done

	return 0
}

check_dump_feasibility()
{
	if [ $DEFAULT_DUMP_MODE == "fadump" ]; then
		return 0
	fi

	check_kdump_feasibility
	return $?
}

start_fadump()
{
	echo 1 > $FADUMP_REGISTER_SYS_NODE
	if ! check_current_fadump_status; then
		echo "fadump: failed to register"
		return 1
	fi

	echo "fadump: registered successfully"
	return 0
}

start_dump()
{
	if [ $DEFAULT_DUMP_MODE == "fadump" ]; then
		start_fadump
	else
		load_kdump
	fi

	return $?
}

check_default_config()
{
	local default_option

	default_option=$(awk '$1 ~ /^default$/ {print $2;}' $KDUMP_CONFIG_FILE)
	if [ -z "$default_option" ]; then
		return 0
	else
		case "$default_option" in
		  reboot|halt|poweroff|shell|dump_to_rootfs)
			return 0
		  ;;
		  *)
			echo $"Usage kdump.conf: default {reboot|halt|poweroff|shell|dump_to_rootfs}"
			return 1
		esac
	fi
}

start()
{
	check_config
	if [ $? -ne 0 ]; then
		echo "Starting kdump: [FAILED]"
		return 1
	fi

	if sestatus 2>/dev/null | grep -q "SELinux status.*enabled"; then
		selinux_relabel
	fi
	save_raw
	if [ $? -ne 0 ]; then
		echo "Starting kdump: [FAILED]"
		return 1
	fi

	check_dump_feasibility
	if [ $? -ne 0 ]; then
		echo "Starting kdump: [FAILED]"
		return 1
	fi

	check_current_status
	if [ $? == 0 ]; then
		echo "Kdump already running: [WARNING]"
		return 0
	fi

	if check_ssh_config; then
		if ! check_ssh_target; then
			echo "Starting kdump: [FAILED]"
			return 1
		fi
	fi

	check_rebuild
	if [ $? != 0 ]; then
		echo "Starting kdump: [FAILED]"
		return 1
	fi

	start_dump
	if [ $? != 0 ]; then
		echo "Starting kdump: [FAILED]"
		return 1
	fi

	echo "Starting kdump: [OK]"
}

stop_fadump()
{
	echo 0 > $FADUMP_REGISTER_SYS_NODE
	if check_current_fadump_status; then
		echo "fadump: failed to unregister"
		return 1
	fi

	echo "fadump: unregistered successfully"
	return 0
}

stop_kdump()
{
	if is_secure_boot_enforced; then
		$KEXEC -s -p -u
	else
		$KEXEC -p -u
	fi

	if [ $? != 0 ]; then
		echo "kexec: failed to unload kdump kernel"
		return 1
	fi

	echo "kexec: unloaded kdump kernel"
	return 0
}

stop()
{
	if [ $DEFAULT_DUMP_MODE == "fadump" ]; then
		stop_fadump
	else
		stop_kdump
	fi

	if [ $? != 0 ]; then
		echo "Stopping kdump: [FAILED]"
		return 1
	fi

	echo "Stopping kdump: [OK]"
	return 0
}

if [ ! -f "$KDUMP_CONFIG_FILE" ]; then
	echo "Error: No kdump config file found!"  >&2
	exit 1
fi

main ()
{
	# Determine if the dump mode is kdump or fadump
	determine_dump_mode

	case "$1" in
	  start)
		if [ -s /proc/vmcore ]; then
			save_core
			reboot
		else
			start
		fi
		;;
	  stop)
		stop
		;;
	  status)
		EXIT_CODE=0
		check_current_status
		case "$?" in
		  0)
			echo "Kdump is operational"
			EXIT_CODE=0
			;;
		  1)
			echo "Kdump is not operational"
			EXIT_CODE=3
			;;
		esac
		exit $EXIT_CODE
		;;
	  restart)
		stop
		start
		;;
	  condrestart)
		;;
	  propagate)
		propagate_ssh_key
		;;
	  *)
		echo $"Usage: $0 {start|stop|status|restart|propagate}"
		exit 1
	esac
}

# Other kdumpctl instances will block in queue, until this one exits
single_instance_lock

# To avoid fd 9 leaking, we invoke a subshell, close fd 9 and call main.
# So that fd isn't leaking when main is invoking a subshell.
(exec 9<&-; main $1)

exit $?