kexec-tools/kdump-lib-initramfs.sh

164 lines
4.4 KiB
Bash
Raw Normal View History

# These variables and functions are useful in 2nd kernel
. /lib/kdump-lib.sh
KDUMP_PATH="/var/crash"
CORE_COLLECTOR=""
DEFAULT_CORE_COLLECTOR="makedumpfile -l --message-level 1 -d 31"
DMESG_COLLECTOR="/sbin/vmcore-dmesg"
DEFAULT_ACTION="reboot"
DATEDIR=`date +%Y-%m-%d-%T`
HOST_IP='127.0.0.1'
DUMP_INSTRUCTION=""
SSH_KEY_LOCATION="/root/.ssh/kdump_id_rsa"
KDUMP_SCRIPT_DIR="/kdumpscripts"
DD_BLKSIZE=512
FINAL_ACTION="reboot"
KDUMP_CONF="/etc/kdump.conf"
KDUMP_PRE=""
KDUMP_POST=""
NEWROOT="/sysroot"
get_kdump_confs()
{
local config_opt config_val
while read config_opt config_val;
do
# remove inline comments after the end of a directive.
config_val=$(strip_comments $config_val)
case "$config_opt" in
path)
KDUMP_PATH="$config_val"
;;
core_collector)
[ -n "$config_val" ] && CORE_COLLECTOR="$config_val"
;;
sshkey)
if [ -f "$config_val" ]; then
SSH_KEY_LOCATION=$config_val
fi
;;
kdump_pre)
KDUMP_PRE="$config_val"
;;
kdump_post)
KDUMP_POST="$config_val"
;;
fence_kdump_args)
FENCE_KDUMP_ARGS="$config_val"
;;
fence_kdump_nodes)
FENCE_KDUMP_NODES="$config_val"
;;
default)
case $config_val in
shell)
Introduce kdump error handling service Now upon failure kdump script might not be called at all and it might not be able to execute default action. It results in a hang. Because we disable emergency shell and rely on kdump.sh being invoked through dracut-pre-pivot hook. But it might happen that we never call into dracut-pre-pivot hook because certain systemd targets could not reach due to failure in their dependencies. In those cases error handling code does not run and system hangs. For example: sysroot-var-crash.mount --> initrd-root-fs.target --> initrd.target \ --> dracut-pre-pivot.service --> kdump.sh If /sysroot/var/crash mount fails, initrd-root-fs.target will not be reached. And then initrd.target will not be reached, dracut-pre-pivot.service wouldn't run. Finally kdump.sh wouldn't run. To solve this problem, we need to separate the error handling code from dracut-pre-pivot hook, and every time when a failure shows up, the separated code can be called by the emergency service. By default systemd provides an emergency service which will drop us into shell every time upon a critical failure. It's very convenient for us to re-use the framework of systemd emergency, because we don't have to touch the other parts of systemd. We can use our own script instead of the default one. This new scheme will overwrite emergency shell and replace with kdump error handling code. And this code will do the error handling as needed. Now, we will not rely on dracut-pre-pivot hook running always. Instead whenever error happens and it is serious enough that emergency shell needed to run, now kdump error handler will run. dracut-emergency is also replaced by kdump error handler and it's enabled again all the way down. So all the failure (including systemd and dracut) in 2nd kernel could be captured, and trigger kdump error handler. dracut-initqueue is a special case, which calls "systemctl start emergency" directly, not via "OnFailure=emergency". In case of failure, emergency is started, but not in a isolation mode, which means dracut-initqueue is still running. On the other hand, emergency will call dracut-initqueue again when default action is dump_to_rootfs. systemd would block on the last dracut-initqueue, waiting for the first instance to exit, which leaves us hang. It looks like the following: dracut-initqueue (running) --> call dracut-emergency: --> dracut-emergency (running) --> kdump-error-handler.sh (running) --> call dracut-initqueue: --> blocking and waiting for the original instance to exit. To fix this, I'd like to introduce a wrapper emergency service. This emegency service will replace both the systemd and dracut emergency. And this service does nothing but to isolate to real kdump error handler service: dracut-initqueue (running) --> call dracut-emergency: --> dracut-emergency isolate to kdump-error-handler.service --> dracut-emergency and dracut-initqueue will both be stopped and kdump-error-handler.service will run kdump-error-handler.sh. In a normal failure case, this still works: foo.service fails --> trigger emergency.service --> emergency.service isolates to kdump-error-handler.service --> kdump-error-handler.service will run kdump-error-handler.sh Signed-off-by: WANG Chao <chaowang@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Dave Young <dyoung@redhat.com>
2014-05-08 11:37:15 +00:00
DEFAULT_ACTION="kdump_emergency_shell"
;;
reboot)
DEFAULT_ACTION="reboot"
;;
halt)
DEFAULT_ACTION="halt"
;;
poweroff)
DEFAULT_ACTION="poweroff"
;;
dump_to_rootfs)
Introduce kdump error handling service Now upon failure kdump script might not be called at all and it might not be able to execute default action. It results in a hang. Because we disable emergency shell and rely on kdump.sh being invoked through dracut-pre-pivot hook. But it might happen that we never call into dracut-pre-pivot hook because certain systemd targets could not reach due to failure in their dependencies. In those cases error handling code does not run and system hangs. For example: sysroot-var-crash.mount --> initrd-root-fs.target --> initrd.target \ --> dracut-pre-pivot.service --> kdump.sh If /sysroot/var/crash mount fails, initrd-root-fs.target will not be reached. And then initrd.target will not be reached, dracut-pre-pivot.service wouldn't run. Finally kdump.sh wouldn't run. To solve this problem, we need to separate the error handling code from dracut-pre-pivot hook, and every time when a failure shows up, the separated code can be called by the emergency service. By default systemd provides an emergency service which will drop us into shell every time upon a critical failure. It's very convenient for us to re-use the framework of systemd emergency, because we don't have to touch the other parts of systemd. We can use our own script instead of the default one. This new scheme will overwrite emergency shell and replace with kdump error handling code. And this code will do the error handling as needed. Now, we will not rely on dracut-pre-pivot hook running always. Instead whenever error happens and it is serious enough that emergency shell needed to run, now kdump error handler will run. dracut-emergency is also replaced by kdump error handler and it's enabled again all the way down. So all the failure (including systemd and dracut) in 2nd kernel could be captured, and trigger kdump error handler. dracut-initqueue is a special case, which calls "systemctl start emergency" directly, not via "OnFailure=emergency". In case of failure, emergency is started, but not in a isolation mode, which means dracut-initqueue is still running. On the other hand, emergency will call dracut-initqueue again when default action is dump_to_rootfs. systemd would block on the last dracut-initqueue, waiting for the first instance to exit, which leaves us hang. It looks like the following: dracut-initqueue (running) --> call dracut-emergency: --> dracut-emergency (running) --> kdump-error-handler.sh (running) --> call dracut-initqueue: --> blocking and waiting for the original instance to exit. To fix this, I'd like to introduce a wrapper emergency service. This emegency service will replace both the systemd and dracut emergency. And this service does nothing but to isolate to real kdump error handler service: dracut-initqueue (running) --> call dracut-emergency: --> dracut-emergency isolate to kdump-error-handler.service --> dracut-emergency and dracut-initqueue will both be stopped and kdump-error-handler.service will run kdump-error-handler.sh. In a normal failure case, this still works: foo.service fails --> trigger emergency.service --> emergency.service isolates to kdump-error-handler.service --> kdump-error-handler.service will run kdump-error-handler.sh Signed-off-by: WANG Chao <chaowang@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Dave Young <dyoung@redhat.com>
2014-05-08 11:37:15 +00:00
DEFAULT_ACTION="dump_to_rootfs"
;;
esac
;;
esac
done < $KDUMP_CONF
Introduce kdump error handling service Now upon failure kdump script might not be called at all and it might not be able to execute default action. It results in a hang. Because we disable emergency shell and rely on kdump.sh being invoked through dracut-pre-pivot hook. But it might happen that we never call into dracut-pre-pivot hook because certain systemd targets could not reach due to failure in their dependencies. In those cases error handling code does not run and system hangs. For example: sysroot-var-crash.mount --> initrd-root-fs.target --> initrd.target \ --> dracut-pre-pivot.service --> kdump.sh If /sysroot/var/crash mount fails, initrd-root-fs.target will not be reached. And then initrd.target will not be reached, dracut-pre-pivot.service wouldn't run. Finally kdump.sh wouldn't run. To solve this problem, we need to separate the error handling code from dracut-pre-pivot hook, and every time when a failure shows up, the separated code can be called by the emergency service. By default systemd provides an emergency service which will drop us into shell every time upon a critical failure. It's very convenient for us to re-use the framework of systemd emergency, because we don't have to touch the other parts of systemd. We can use our own script instead of the default one. This new scheme will overwrite emergency shell and replace with kdump error handling code. And this code will do the error handling as needed. Now, we will not rely on dracut-pre-pivot hook running always. Instead whenever error happens and it is serious enough that emergency shell needed to run, now kdump error handler will run. dracut-emergency is also replaced by kdump error handler and it's enabled again all the way down. So all the failure (including systemd and dracut) in 2nd kernel could be captured, and trigger kdump error handler. dracut-initqueue is a special case, which calls "systemctl start emergency" directly, not via "OnFailure=emergency". In case of failure, emergency is started, but not in a isolation mode, which means dracut-initqueue is still running. On the other hand, emergency will call dracut-initqueue again when default action is dump_to_rootfs. systemd would block on the last dracut-initqueue, waiting for the first instance to exit, which leaves us hang. It looks like the following: dracut-initqueue (running) --> call dracut-emergency: --> dracut-emergency (running) --> kdump-error-handler.sh (running) --> call dracut-initqueue: --> blocking and waiting for the original instance to exit. To fix this, I'd like to introduce a wrapper emergency service. This emegency service will replace both the systemd and dracut emergency. And this service does nothing but to isolate to real kdump error handler service: dracut-initqueue (running) --> call dracut-emergency: --> dracut-emergency isolate to kdump-error-handler.service --> dracut-emergency and dracut-initqueue will both be stopped and kdump-error-handler.service will run kdump-error-handler.sh. In a normal failure case, this still works: foo.service fails --> trigger emergency.service --> emergency.service isolates to kdump-error-handler.service --> kdump-error-handler.service will run kdump-error-handler.sh Signed-off-by: WANG Chao <chaowang@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Dave Young <dyoung@redhat.com>
2014-05-08 11:37:15 +00:00
if [ -z "$CORE_COLLECTOR" ]; then
CORE_COLLECTOR="$DEFAULT_CORE_COLLECTOR"
if is_ssh_dump_target || is_raw_dump_target; then
Introduce kdump error handling service Now upon failure kdump script might not be called at all and it might not be able to execute default action. It results in a hang. Because we disable emergency shell and rely on kdump.sh being invoked through dracut-pre-pivot hook. But it might happen that we never call into dracut-pre-pivot hook because certain systemd targets could not reach due to failure in their dependencies. In those cases error handling code does not run and system hangs. For example: sysroot-var-crash.mount --> initrd-root-fs.target --> initrd.target \ --> dracut-pre-pivot.service --> kdump.sh If /sysroot/var/crash mount fails, initrd-root-fs.target will not be reached. And then initrd.target will not be reached, dracut-pre-pivot.service wouldn't run. Finally kdump.sh wouldn't run. To solve this problem, we need to separate the error handling code from dracut-pre-pivot hook, and every time when a failure shows up, the separated code can be called by the emergency service. By default systemd provides an emergency service which will drop us into shell every time upon a critical failure. It's very convenient for us to re-use the framework of systemd emergency, because we don't have to touch the other parts of systemd. We can use our own script instead of the default one. This new scheme will overwrite emergency shell and replace with kdump error handling code. And this code will do the error handling as needed. Now, we will not rely on dracut-pre-pivot hook running always. Instead whenever error happens and it is serious enough that emergency shell needed to run, now kdump error handler will run. dracut-emergency is also replaced by kdump error handler and it's enabled again all the way down. So all the failure (including systemd and dracut) in 2nd kernel could be captured, and trigger kdump error handler. dracut-initqueue is a special case, which calls "systemctl start emergency" directly, not via "OnFailure=emergency". In case of failure, emergency is started, but not in a isolation mode, which means dracut-initqueue is still running. On the other hand, emergency will call dracut-initqueue again when default action is dump_to_rootfs. systemd would block on the last dracut-initqueue, waiting for the first instance to exit, which leaves us hang. It looks like the following: dracut-initqueue (running) --> call dracut-emergency: --> dracut-emergency (running) --> kdump-error-handler.sh (running) --> call dracut-initqueue: --> blocking and waiting for the original instance to exit. To fix this, I'd like to introduce a wrapper emergency service. This emegency service will replace both the systemd and dracut emergency. And this service does nothing but to isolate to real kdump error handler service: dracut-initqueue (running) --> call dracut-emergency: --> dracut-emergency isolate to kdump-error-handler.service --> dracut-emergency and dracut-initqueue will both be stopped and kdump-error-handler.service will run kdump-error-handler.sh. In a normal failure case, this still works: foo.service fails --> trigger emergency.service --> emergency.service isolates to kdump-error-handler.service --> kdump-error-handler.service will run kdump-error-handler.sh Signed-off-by: WANG Chao <chaowang@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Dave Young <dyoung@redhat.com>
2014-05-08 11:37:15 +00:00
CORE_COLLECTOR="$CORE_COLLECTOR -F"
fi
fi
}
# dump_fs <mount point| device>
dump_fs()
{
local _dev=$(findmnt -k -f -n -r -o SOURCE $1)
local _mp=$(findmnt -k -f -n -r -o TARGET $1)
echo "kdump: dump target is $_dev"
if [ -z "$_mp" ]; then
echo "kdump: error: Dump target $_dev is not mounted."
return 1
fi
# Remove -F in makedumpfile case. We don't want a flat format dump here.
[[ $CORE_COLLECTOR = *makedumpfile* ]] && CORE_COLLECTOR=`echo $CORE_COLLECTOR | sed -e "s/-F//g"`
echo "kdump: saving to $_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/"
mount -o remount,rw $_mp || return 1
mkdir -p $_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR || return 1
save_vmcore_dmesg_fs ${DMESG_COLLECTOR} "$_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/"
echo "kdump: saving vmcore"
$CORE_COLLECTOR /proc/vmcore $_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/vmcore-incomplete || return 1
mv $_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/vmcore-incomplete $_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/vmcore
sync
echo "kdump: saving vmcore complete"
}
save_vmcore_dmesg_fs() {
local _dmesg_collector=$1
local _path=$2
echo "kdump: saving vmcore-dmesg.txt"
$_dmesg_collector /proc/vmcore > ${_path}/vmcore-dmesg-incomplete.txt
_exitcode=$?
if [ $_exitcode -eq 0 ]; then
mv ${_path}/vmcore-dmesg-incomplete.txt ${_path}/vmcore-dmesg.txt
# Make sure file is on disk. There have been instances where later
# saving vmcore failed and system rebooted without sync and there
# was no vmcore-dmesg.txt available.
sync
echo "kdump: saving vmcore-dmesg.txt complete"
else
echo "kdump: saving vmcore-dmesg.txt failed"
fi
}
Introduce kdump error handling service Now upon failure kdump script might not be called at all and it might not be able to execute default action. It results in a hang. Because we disable emergency shell and rely on kdump.sh being invoked through dracut-pre-pivot hook. But it might happen that we never call into dracut-pre-pivot hook because certain systemd targets could not reach due to failure in their dependencies. In those cases error handling code does not run and system hangs. For example: sysroot-var-crash.mount --> initrd-root-fs.target --> initrd.target \ --> dracut-pre-pivot.service --> kdump.sh If /sysroot/var/crash mount fails, initrd-root-fs.target will not be reached. And then initrd.target will not be reached, dracut-pre-pivot.service wouldn't run. Finally kdump.sh wouldn't run. To solve this problem, we need to separate the error handling code from dracut-pre-pivot hook, and every time when a failure shows up, the separated code can be called by the emergency service. By default systemd provides an emergency service which will drop us into shell every time upon a critical failure. It's very convenient for us to re-use the framework of systemd emergency, because we don't have to touch the other parts of systemd. We can use our own script instead of the default one. This new scheme will overwrite emergency shell and replace with kdump error handling code. And this code will do the error handling as needed. Now, we will not rely on dracut-pre-pivot hook running always. Instead whenever error happens and it is serious enough that emergency shell needed to run, now kdump error handler will run. dracut-emergency is also replaced by kdump error handler and it's enabled again all the way down. So all the failure (including systemd and dracut) in 2nd kernel could be captured, and trigger kdump error handler. dracut-initqueue is a special case, which calls "systemctl start emergency" directly, not via "OnFailure=emergency". In case of failure, emergency is started, but not in a isolation mode, which means dracut-initqueue is still running. On the other hand, emergency will call dracut-initqueue again when default action is dump_to_rootfs. systemd would block on the last dracut-initqueue, waiting for the first instance to exit, which leaves us hang. It looks like the following: dracut-initqueue (running) --> call dracut-emergency: --> dracut-emergency (running) --> kdump-error-handler.sh (running) --> call dracut-initqueue: --> blocking and waiting for the original instance to exit. To fix this, I'd like to introduce a wrapper emergency service. This emegency service will replace both the systemd and dracut emergency. And this service does nothing but to isolate to real kdump error handler service: dracut-initqueue (running) --> call dracut-emergency: --> dracut-emergency isolate to kdump-error-handler.service --> dracut-emergency and dracut-initqueue will both be stopped and kdump-error-handler.service will run kdump-error-handler.sh. In a normal failure case, this still works: foo.service fails --> trigger emergency.service --> emergency.service isolates to kdump-error-handler.service --> kdump-error-handler.service will run kdump-error-handler.sh Signed-off-by: WANG Chao <chaowang@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Dave Young <dyoung@redhat.com>
2014-05-08 11:37:15 +00:00
dump_to_rootfs()
{
echo "Kdump: trying to bring up rootfs device"
systemctl start dracut-initqueue
echo "Kdump: waiting for rootfs mount, will timeout after 90 seconds"
systemctl start sysroot.mount
dump_fs $NEWROOT
}
kdump_emergency_shell()
{
echo "PS1=\"kdump:\\\${PWD}# \"" >/etc/profile
/bin/dracut-emergency
rm -f /etc/profile
}
do_default_action()
{
Introduce kdump error handling service Now upon failure kdump script might not be called at all and it might not be able to execute default action. It results in a hang. Because we disable emergency shell and rely on kdump.sh being invoked through dracut-pre-pivot hook. But it might happen that we never call into dracut-pre-pivot hook because certain systemd targets could not reach due to failure in their dependencies. In those cases error handling code does not run and system hangs. For example: sysroot-var-crash.mount --> initrd-root-fs.target --> initrd.target \ --> dracut-pre-pivot.service --> kdump.sh If /sysroot/var/crash mount fails, initrd-root-fs.target will not be reached. And then initrd.target will not be reached, dracut-pre-pivot.service wouldn't run. Finally kdump.sh wouldn't run. To solve this problem, we need to separate the error handling code from dracut-pre-pivot hook, and every time when a failure shows up, the separated code can be called by the emergency service. By default systemd provides an emergency service which will drop us into shell every time upon a critical failure. It's very convenient for us to re-use the framework of systemd emergency, because we don't have to touch the other parts of systemd. We can use our own script instead of the default one. This new scheme will overwrite emergency shell and replace with kdump error handling code. And this code will do the error handling as needed. Now, we will not rely on dracut-pre-pivot hook running always. Instead whenever error happens and it is serious enough that emergency shell needed to run, now kdump error handler will run. dracut-emergency is also replaced by kdump error handler and it's enabled again all the way down. So all the failure (including systemd and dracut) in 2nd kernel could be captured, and trigger kdump error handler. dracut-initqueue is a special case, which calls "systemctl start emergency" directly, not via "OnFailure=emergency". In case of failure, emergency is started, but not in a isolation mode, which means dracut-initqueue is still running. On the other hand, emergency will call dracut-initqueue again when default action is dump_to_rootfs. systemd would block on the last dracut-initqueue, waiting for the first instance to exit, which leaves us hang. It looks like the following: dracut-initqueue (running) --> call dracut-emergency: --> dracut-emergency (running) --> kdump-error-handler.sh (running) --> call dracut-initqueue: --> blocking and waiting for the original instance to exit. To fix this, I'd like to introduce a wrapper emergency service. This emegency service will replace both the systemd and dracut emergency. And this service does nothing but to isolate to real kdump error handler service: dracut-initqueue (running) --> call dracut-emergency: --> dracut-emergency isolate to kdump-error-handler.service --> dracut-emergency and dracut-initqueue will both be stopped and kdump-error-handler.service will run kdump-error-handler.sh. In a normal failure case, this still works: foo.service fails --> trigger emergency.service --> emergency.service isolates to kdump-error-handler.service --> kdump-error-handler.service will run kdump-error-handler.sh Signed-off-by: WANG Chao <chaowang@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Dave Young <dyoung@redhat.com>
2014-05-08 11:37:15 +00:00
echo "Kdump: Executing default action $DEFAULT_ACTION"
eval $DEFAULT_ACTION
}
do_final_action()
{
eval $FINAL_ACTION
}