kexec-tools/dracut-module-setup.sh

1073 lines
33 KiB
Bash
Raw Normal View History

#!/bin/bash
kdump_module_init() {
if ! [[ -d "${initdir}/tmp" ]]; then
mkdir -p "${initdir}/tmp"
fi
. /lib/kdump/kdump-lib.sh
}
check() {
[[ $debug ]] && set -x
#kdumpctl sets this explicitly
if [[ -z $IN_KDUMP ]] || [[ ! -f /etc/kdump.conf ]]; then
return 1
fi
return 0
}
depends() {
local _dep="base shutdown"
kdump_module_init
add_opt_module() {
[[ " $omit_dracutmodules " != *\ $1\ * ]] && _dep="$_dep $1"
}
if is_squash_available; then
add_opt_module squash
else
dwarning "Required modules to build a squashed kdump image is missing!"
fi
if is_wdt_active; then
add_opt_module watchdog
fi
if is_ssh_dump_target; then
_dep="$_dep ssh-client"
fi
if [[ "$(uname -m)" == "s390x" ]]; then
_dep="$_dep znet"
fi
if [[ -n "$(ls -A /sys/class/drm 2> /dev/null)" ]] || [[ -d /sys/module/hyperv_fb ]]; then
add_opt_module drm
fi
if is_generic_fence_kdump || is_pcs_fence_kdump; then
_dep="$_dep network"
fi
echo "$_dep"
}
kdump_is_bridge() {
[[ -d /sys/class/net/"$1"/bridge ]]
}
kdump_is_bond() {
[[ -d /sys/class/net/"$1"/bonding ]]
}
kdump_is_team() {
[[ -f /usr/bin/teamnl ]] && teamnl "$1" ports &> /dev/null
}
kdump_is_vlan() {
[[ -f /proc/net/vlan/"$1" ]]
}
# $1: netdev name
source_ifcfg_file() {
local ifcfg_file
dwarning "Network Scripts are deprecated. You are encouraged to set up network by NetworkManager."
ifcfg_file=$(get_ifcfg_filename "$1")
if [[ -f ${ifcfg_file} ]]; then
. "${ifcfg_file}"
else
dwarning "The ifcfg file of $1 is not found!"
fi
}
# $1: nmcli connection show output
kdump_setup_dns() {
local _netdev="$1"
local _nm_show_cmd="$2"
local _nameserver _dns _tmp array
local _dnsfile=${initdir}/etc/cmdline.d/42dns.conf
_tmp=$(get_nmcli_value_by_field "$_nm_show_cmd" "IP4.DNS")
# shellcheck disable=SC2206
array=(${_tmp//|/ })
if [[ ${array[*]} ]]; then
for _dns in "${array[@]}"; do
echo "nameserver=$_dns" >> "$_dnsfile"
done
else
dwarning "Failed to get DNS info via nmcli output. Now try sourcing ifcfg script"
source_ifcfg_file "$_netdev"
[[ -n $DNS1 ]] && echo "nameserver=$DNS1" > "$_dnsfile"
[[ -n $DNS2 ]] && echo "nameserver=$DNS2" >> "$_dnsfile"
fi
while read -r content; do
_nameserver=$(echo "$content" | grep ^nameserver)
[[ -z $_nameserver ]] && continue
_dns=$(echo "$_nameserver" | awk '{print $2}')
[[ -z $_dns ]] && continue
if [[ ! -f $_dnsfile ]] || ! grep -q "$_dns" "$_dnsfile"; then
echo "nameserver=$_dns" >> "$_dnsfile"
fi
done < "/etc/resolv.conf"
}
Implement IP netmask calculation to replace "ipcalc -m" Recently, dracut-network drops depedency on dhcp-client which requires ipcalc. Thus the dependency chain "kexec-tools -> dracut-network -> dhcp-client -> ipcalc" is broken. When NIC is configured to a static IP, kexec-tools depended on "ipcalc -m" to get netmask. This commit implements the shell equivalent of "ipcalc -m". The following test code shows cal_netmask_by_prefix is consistent with "ipcalc -m", #!/bin/bash . dracut-module-setup.sh for i in {0..128}; do mask_expected=$(ipcalc -m fe::/$i| cut -d"=" -f2) mask_actual=$(cal_netmask_by_prefix $i "-6") if [[ "$mask_expected" != "$mask_actual" ]]; then echo "prefix="$i, "expected="$mask_expected, "acutal="$mask_actual exit fi done echo "IPv6 tests passed" for i in {0..32}; do mask_expected=$(ipcalc -m 8.8.8.8/$i| cut -d"=" -f2) mask_actual=$(cal_netmask_by_prefix $i "") if [[ "$mask_expected" != "$mask_actual" ]]; then echo "prefix="$i, "expected="$mask_expected, "acutal="$mask_actual exit fi done echo "IPv4 tests passed" i=-2 res=$(cal_netmask_by_prefix "$i" "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix<0" exit fi res=$(cal_netmask_by_prefix "$i" "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix<0" exit fi i=33 $(cal_netmask_by_prefix $i "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix>32 for IPv4" exit fi i=129 $(cal_netmask_by_prefix $i "-6") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix>128 for IPv4" exit fi echo "Bad prefixes tests passed" echo "All tests passed" Reported-by: Jie Li <jieli@redhat.com> Signed-off-by: Coiby Xu <coxu@redhat.com> Acked-by: Kairui Song <kasong@redhat.com>
2021-04-08 03:44:26 +00:00
# $1: repeat times
# $2: string to be repeated
# $3: separator
repeatedly_join_str() {
local _count="$1"
local _str="$2"
local _separator="$3"
local i _res
if [[ $_count -le 0 ]]; then
Implement IP netmask calculation to replace "ipcalc -m" Recently, dracut-network drops depedency on dhcp-client which requires ipcalc. Thus the dependency chain "kexec-tools -> dracut-network -> dhcp-client -> ipcalc" is broken. When NIC is configured to a static IP, kexec-tools depended on "ipcalc -m" to get netmask. This commit implements the shell equivalent of "ipcalc -m". The following test code shows cal_netmask_by_prefix is consistent with "ipcalc -m", #!/bin/bash . dracut-module-setup.sh for i in {0..128}; do mask_expected=$(ipcalc -m fe::/$i| cut -d"=" -f2) mask_actual=$(cal_netmask_by_prefix $i "-6") if [[ "$mask_expected" != "$mask_actual" ]]; then echo "prefix="$i, "expected="$mask_expected, "acutal="$mask_actual exit fi done echo "IPv6 tests passed" for i in {0..32}; do mask_expected=$(ipcalc -m 8.8.8.8/$i| cut -d"=" -f2) mask_actual=$(cal_netmask_by_prefix $i "") if [[ "$mask_expected" != "$mask_actual" ]]; then echo "prefix="$i, "expected="$mask_expected, "acutal="$mask_actual exit fi done echo "IPv4 tests passed" i=-2 res=$(cal_netmask_by_prefix "$i" "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix<0" exit fi res=$(cal_netmask_by_prefix "$i" "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix<0" exit fi i=33 $(cal_netmask_by_prefix $i "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix>32 for IPv4" exit fi i=129 $(cal_netmask_by_prefix $i "-6") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix>128 for IPv4" exit fi echo "Bad prefixes tests passed" echo "All tests passed" Reported-by: Jie Li <jieli@redhat.com> Signed-off-by: Coiby Xu <coxu@redhat.com> Acked-by: Kairui Song <kasong@redhat.com>
2021-04-08 03:44:26 +00:00
echo -n ""
return
fi
i=0
_res="$_str"
((_count--))
while [[ $i -lt $_count ]]; do
Implement IP netmask calculation to replace "ipcalc -m" Recently, dracut-network drops depedency on dhcp-client which requires ipcalc. Thus the dependency chain "kexec-tools -> dracut-network -> dhcp-client -> ipcalc" is broken. When NIC is configured to a static IP, kexec-tools depended on "ipcalc -m" to get netmask. This commit implements the shell equivalent of "ipcalc -m". The following test code shows cal_netmask_by_prefix is consistent with "ipcalc -m", #!/bin/bash . dracut-module-setup.sh for i in {0..128}; do mask_expected=$(ipcalc -m fe::/$i| cut -d"=" -f2) mask_actual=$(cal_netmask_by_prefix $i "-6") if [[ "$mask_expected" != "$mask_actual" ]]; then echo "prefix="$i, "expected="$mask_expected, "acutal="$mask_actual exit fi done echo "IPv6 tests passed" for i in {0..32}; do mask_expected=$(ipcalc -m 8.8.8.8/$i| cut -d"=" -f2) mask_actual=$(cal_netmask_by_prefix $i "") if [[ "$mask_expected" != "$mask_actual" ]]; then echo "prefix="$i, "expected="$mask_expected, "acutal="$mask_actual exit fi done echo "IPv4 tests passed" i=-2 res=$(cal_netmask_by_prefix "$i" "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix<0" exit fi res=$(cal_netmask_by_prefix "$i" "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix<0" exit fi i=33 $(cal_netmask_by_prefix $i "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix>32 for IPv4" exit fi i=129 $(cal_netmask_by_prefix $i "-6") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix>128 for IPv4" exit fi echo "Bad prefixes tests passed" echo "All tests passed" Reported-by: Jie Li <jieli@redhat.com> Signed-off-by: Coiby Xu <coxu@redhat.com> Acked-by: Kairui Song <kasong@redhat.com>
2021-04-08 03:44:26 +00:00
((i++))
_res="${_res}${_separator}${_str}"
done
echo -n "$_res"
}
# $1: prefix
# $2: ipv6_flag="-6" indicates it's IPv6
# Given a prefix, calculate the netmask (equivalent of "ipcalc -m")
# by concatenating three parts,
# 1) the groups with all bits set 1
# 2) a group with partial bits set to 0
# 3) the groups with all bits set to 0
cal_netmask_by_prefix() {
local _prefix="$1"
local _ipv6_flag="$2" _ipv6
local _bits_per_octet=8
local _count _res _octets_per_group _octets_total _seperator _total_groups
local _max_group_value _max_group_value_repr _bits_per_group _tmp _zero_bits
if [[ $_ipv6_flag == "-6" ]]; then
Implement IP netmask calculation to replace "ipcalc -m" Recently, dracut-network drops depedency on dhcp-client which requires ipcalc. Thus the dependency chain "kexec-tools -> dracut-network -> dhcp-client -> ipcalc" is broken. When NIC is configured to a static IP, kexec-tools depended on "ipcalc -m" to get netmask. This commit implements the shell equivalent of "ipcalc -m". The following test code shows cal_netmask_by_prefix is consistent with "ipcalc -m", #!/bin/bash . dracut-module-setup.sh for i in {0..128}; do mask_expected=$(ipcalc -m fe::/$i| cut -d"=" -f2) mask_actual=$(cal_netmask_by_prefix $i "-6") if [[ "$mask_expected" != "$mask_actual" ]]; then echo "prefix="$i, "expected="$mask_expected, "acutal="$mask_actual exit fi done echo "IPv6 tests passed" for i in {0..32}; do mask_expected=$(ipcalc -m 8.8.8.8/$i| cut -d"=" -f2) mask_actual=$(cal_netmask_by_prefix $i "") if [[ "$mask_expected" != "$mask_actual" ]]; then echo "prefix="$i, "expected="$mask_expected, "acutal="$mask_actual exit fi done echo "IPv4 tests passed" i=-2 res=$(cal_netmask_by_prefix "$i" "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix<0" exit fi res=$(cal_netmask_by_prefix "$i" "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix<0" exit fi i=33 $(cal_netmask_by_prefix $i "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix>32 for IPv4" exit fi i=129 $(cal_netmask_by_prefix $i "-6") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix>128 for IPv4" exit fi echo "Bad prefixes tests passed" echo "All tests passed" Reported-by: Jie Li <jieli@redhat.com> Signed-off-by: Coiby Xu <coxu@redhat.com> Acked-by: Kairui Song <kasong@redhat.com>
2021-04-08 03:44:26 +00:00
_ipv6=1
else
_ipv6=0
fi
if [[ $_prefix -lt 0 || $_prefix -gt 128 ]] \
|| ( ((!_ipv6)) && [[ $_prefix -gt 32 ]]); then
Implement IP netmask calculation to replace "ipcalc -m" Recently, dracut-network drops depedency on dhcp-client which requires ipcalc. Thus the dependency chain "kexec-tools -> dracut-network -> dhcp-client -> ipcalc" is broken. When NIC is configured to a static IP, kexec-tools depended on "ipcalc -m" to get netmask. This commit implements the shell equivalent of "ipcalc -m". The following test code shows cal_netmask_by_prefix is consistent with "ipcalc -m", #!/bin/bash . dracut-module-setup.sh for i in {0..128}; do mask_expected=$(ipcalc -m fe::/$i| cut -d"=" -f2) mask_actual=$(cal_netmask_by_prefix $i "-6") if [[ "$mask_expected" != "$mask_actual" ]]; then echo "prefix="$i, "expected="$mask_expected, "acutal="$mask_actual exit fi done echo "IPv6 tests passed" for i in {0..32}; do mask_expected=$(ipcalc -m 8.8.8.8/$i| cut -d"=" -f2) mask_actual=$(cal_netmask_by_prefix $i "") if [[ "$mask_expected" != "$mask_actual" ]]; then echo "prefix="$i, "expected="$mask_expected, "acutal="$mask_actual exit fi done echo "IPv4 tests passed" i=-2 res=$(cal_netmask_by_prefix "$i" "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix<0" exit fi res=$(cal_netmask_by_prefix "$i" "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix<0" exit fi i=33 $(cal_netmask_by_prefix $i "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix>32 for IPv4" exit fi i=129 $(cal_netmask_by_prefix $i "-6") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix>128 for IPv4" exit fi echo "Bad prefixes tests passed" echo "All tests passed" Reported-by: Jie Li <jieli@redhat.com> Signed-off-by: Coiby Xu <coxu@redhat.com> Acked-by: Kairui Song <kasong@redhat.com>
2021-04-08 03:44:26 +00:00
derror "Bad prefix:$_prefix for calculating netmask"
exit 1
fi
if ((_ipv6)); then
_octets_per_group=2
_octets_total=16
_seperator=":"
else
_octets_per_group=1
_octets_total=4
_seperator="."
fi
_total_groups=$((_octets_total / _octets_per_group))
Implement IP netmask calculation to replace "ipcalc -m" Recently, dracut-network drops depedency on dhcp-client which requires ipcalc. Thus the dependency chain "kexec-tools -> dracut-network -> dhcp-client -> ipcalc" is broken. When NIC is configured to a static IP, kexec-tools depended on "ipcalc -m" to get netmask. This commit implements the shell equivalent of "ipcalc -m". The following test code shows cal_netmask_by_prefix is consistent with "ipcalc -m", #!/bin/bash . dracut-module-setup.sh for i in {0..128}; do mask_expected=$(ipcalc -m fe::/$i| cut -d"=" -f2) mask_actual=$(cal_netmask_by_prefix $i "-6") if [[ "$mask_expected" != "$mask_actual" ]]; then echo "prefix="$i, "expected="$mask_expected, "acutal="$mask_actual exit fi done echo "IPv6 tests passed" for i in {0..32}; do mask_expected=$(ipcalc -m 8.8.8.8/$i| cut -d"=" -f2) mask_actual=$(cal_netmask_by_prefix $i "") if [[ "$mask_expected" != "$mask_actual" ]]; then echo "prefix="$i, "expected="$mask_expected, "acutal="$mask_actual exit fi done echo "IPv4 tests passed" i=-2 res=$(cal_netmask_by_prefix "$i" "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix<0" exit fi res=$(cal_netmask_by_prefix "$i" "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix<0" exit fi i=33 $(cal_netmask_by_prefix $i "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix>32 for IPv4" exit fi i=129 $(cal_netmask_by_prefix $i "-6") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix>128 for IPv4" exit fi echo "Bad prefixes tests passed" echo "All tests passed" Reported-by: Jie Li <jieli@redhat.com> Signed-off-by: Coiby Xu <coxu@redhat.com> Acked-by: Kairui Song <kasong@redhat.com>
2021-04-08 03:44:26 +00:00
_bits_per_group=$((_octets_per_group * _bits_per_octet))
_max_group_value=$(((1 << _bits_per_group) - 1))
if ((_ipv6)); then
_max_group_value_repr=$(printf "%x" $_max_group_value)
else
_max_group_value_repr="$_max_group_value"
fi
_count=$((_prefix / _octets_per_group / _bits_per_octet))
Implement IP netmask calculation to replace "ipcalc -m" Recently, dracut-network drops depedency on dhcp-client which requires ipcalc. Thus the dependency chain "kexec-tools -> dracut-network -> dhcp-client -> ipcalc" is broken. When NIC is configured to a static IP, kexec-tools depended on "ipcalc -m" to get netmask. This commit implements the shell equivalent of "ipcalc -m". The following test code shows cal_netmask_by_prefix is consistent with "ipcalc -m", #!/bin/bash . dracut-module-setup.sh for i in {0..128}; do mask_expected=$(ipcalc -m fe::/$i| cut -d"=" -f2) mask_actual=$(cal_netmask_by_prefix $i "-6") if [[ "$mask_expected" != "$mask_actual" ]]; then echo "prefix="$i, "expected="$mask_expected, "acutal="$mask_actual exit fi done echo "IPv6 tests passed" for i in {0..32}; do mask_expected=$(ipcalc -m 8.8.8.8/$i| cut -d"=" -f2) mask_actual=$(cal_netmask_by_prefix $i "") if [[ "$mask_expected" != "$mask_actual" ]]; then echo "prefix="$i, "expected="$mask_expected, "acutal="$mask_actual exit fi done echo "IPv4 tests passed" i=-2 res=$(cal_netmask_by_prefix "$i" "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix<0" exit fi res=$(cal_netmask_by_prefix "$i" "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix<0" exit fi i=33 $(cal_netmask_by_prefix $i "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix>32 for IPv4" exit fi i=129 $(cal_netmask_by_prefix $i "-6") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix>128 for IPv4" exit fi echo "Bad prefixes tests passed" echo "All tests passed" Reported-by: Jie Li <jieli@redhat.com> Signed-off-by: Coiby Xu <coxu@redhat.com> Acked-by: Kairui Song <kasong@redhat.com>
2021-04-08 03:44:26 +00:00
_first_part=$(repeatedly_join_str "$_count" "$_max_group_value_repr" "$_seperator")
_res="$_first_part"
_tmp=$((_octets_total * _bits_per_octet - _prefix))
_zero_bits=$((_tmp % _bits_per_group))
if [[ $_zero_bits -ne 0 ]]; then
Implement IP netmask calculation to replace "ipcalc -m" Recently, dracut-network drops depedency on dhcp-client which requires ipcalc. Thus the dependency chain "kexec-tools -> dracut-network -> dhcp-client -> ipcalc" is broken. When NIC is configured to a static IP, kexec-tools depended on "ipcalc -m" to get netmask. This commit implements the shell equivalent of "ipcalc -m". The following test code shows cal_netmask_by_prefix is consistent with "ipcalc -m", #!/bin/bash . dracut-module-setup.sh for i in {0..128}; do mask_expected=$(ipcalc -m fe::/$i| cut -d"=" -f2) mask_actual=$(cal_netmask_by_prefix $i "-6") if [[ "$mask_expected" != "$mask_actual" ]]; then echo "prefix="$i, "expected="$mask_expected, "acutal="$mask_actual exit fi done echo "IPv6 tests passed" for i in {0..32}; do mask_expected=$(ipcalc -m 8.8.8.8/$i| cut -d"=" -f2) mask_actual=$(cal_netmask_by_prefix $i "") if [[ "$mask_expected" != "$mask_actual" ]]; then echo "prefix="$i, "expected="$mask_expected, "acutal="$mask_actual exit fi done echo "IPv4 tests passed" i=-2 res=$(cal_netmask_by_prefix "$i" "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix<0" exit fi res=$(cal_netmask_by_prefix "$i" "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix<0" exit fi i=33 $(cal_netmask_by_prefix $i "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix>32 for IPv4" exit fi i=129 $(cal_netmask_by_prefix $i "-6") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix>128 for IPv4" exit fi echo "Bad prefixes tests passed" echo "All tests passed" Reported-by: Jie Li <jieli@redhat.com> Signed-off-by: Coiby Xu <coxu@redhat.com> Acked-by: Kairui Song <kasong@redhat.com>
2021-04-08 03:44:26 +00:00
_second_part=$((_max_group_value >> _zero_bits << _zero_bits))
if ((_ipv6)); then
_second_part=$(printf "%x" $_second_part)
fi
((_count++))
if [[ -z $_first_part ]]; then
Implement IP netmask calculation to replace "ipcalc -m" Recently, dracut-network drops depedency on dhcp-client which requires ipcalc. Thus the dependency chain "kexec-tools -> dracut-network -> dhcp-client -> ipcalc" is broken. When NIC is configured to a static IP, kexec-tools depended on "ipcalc -m" to get netmask. This commit implements the shell equivalent of "ipcalc -m". The following test code shows cal_netmask_by_prefix is consistent with "ipcalc -m", #!/bin/bash . dracut-module-setup.sh for i in {0..128}; do mask_expected=$(ipcalc -m fe::/$i| cut -d"=" -f2) mask_actual=$(cal_netmask_by_prefix $i "-6") if [[ "$mask_expected" != "$mask_actual" ]]; then echo "prefix="$i, "expected="$mask_expected, "acutal="$mask_actual exit fi done echo "IPv6 tests passed" for i in {0..32}; do mask_expected=$(ipcalc -m 8.8.8.8/$i| cut -d"=" -f2) mask_actual=$(cal_netmask_by_prefix $i "") if [[ "$mask_expected" != "$mask_actual" ]]; then echo "prefix="$i, "expected="$mask_expected, "acutal="$mask_actual exit fi done echo "IPv4 tests passed" i=-2 res=$(cal_netmask_by_prefix "$i" "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix<0" exit fi res=$(cal_netmask_by_prefix "$i" "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix<0" exit fi i=33 $(cal_netmask_by_prefix $i "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix>32 for IPv4" exit fi i=129 $(cal_netmask_by_prefix $i "-6") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix>128 for IPv4" exit fi echo "Bad prefixes tests passed" echo "All tests passed" Reported-by: Jie Li <jieli@redhat.com> Signed-off-by: Coiby Xu <coxu@redhat.com> Acked-by: Kairui Song <kasong@redhat.com>
2021-04-08 03:44:26 +00:00
_res="$_second_part"
else
_res="${_first_part}${_seperator}${_second_part}"
fi
fi
_count=$((_total_groups - _count))
if [[ $_count -eq 0 ]]; then
Implement IP netmask calculation to replace "ipcalc -m" Recently, dracut-network drops depedency on dhcp-client which requires ipcalc. Thus the dependency chain "kexec-tools -> dracut-network -> dhcp-client -> ipcalc" is broken. When NIC is configured to a static IP, kexec-tools depended on "ipcalc -m" to get netmask. This commit implements the shell equivalent of "ipcalc -m". The following test code shows cal_netmask_by_prefix is consistent with "ipcalc -m", #!/bin/bash . dracut-module-setup.sh for i in {0..128}; do mask_expected=$(ipcalc -m fe::/$i| cut -d"=" -f2) mask_actual=$(cal_netmask_by_prefix $i "-6") if [[ "$mask_expected" != "$mask_actual" ]]; then echo "prefix="$i, "expected="$mask_expected, "acutal="$mask_actual exit fi done echo "IPv6 tests passed" for i in {0..32}; do mask_expected=$(ipcalc -m 8.8.8.8/$i| cut -d"=" -f2) mask_actual=$(cal_netmask_by_prefix $i "") if [[ "$mask_expected" != "$mask_actual" ]]; then echo "prefix="$i, "expected="$mask_expected, "acutal="$mask_actual exit fi done echo "IPv4 tests passed" i=-2 res=$(cal_netmask_by_prefix "$i" "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix<0" exit fi res=$(cal_netmask_by_prefix "$i" "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix<0" exit fi i=33 $(cal_netmask_by_prefix $i "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix>32 for IPv4" exit fi i=129 $(cal_netmask_by_prefix $i "-6") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix>128 for IPv4" exit fi echo "Bad prefixes tests passed" echo "All tests passed" Reported-by: Jie Li <jieli@redhat.com> Signed-off-by: Coiby Xu <coxu@redhat.com> Acked-by: Kairui Song <kasong@redhat.com>
2021-04-08 03:44:26 +00:00
echo -n "$_res"
return
fi
if ((_ipv6)) && [[ $_count -gt 1 ]]; then
Implement IP netmask calculation to replace "ipcalc -m" Recently, dracut-network drops depedency on dhcp-client which requires ipcalc. Thus the dependency chain "kexec-tools -> dracut-network -> dhcp-client -> ipcalc" is broken. When NIC is configured to a static IP, kexec-tools depended on "ipcalc -m" to get netmask. This commit implements the shell equivalent of "ipcalc -m". The following test code shows cal_netmask_by_prefix is consistent with "ipcalc -m", #!/bin/bash . dracut-module-setup.sh for i in {0..128}; do mask_expected=$(ipcalc -m fe::/$i| cut -d"=" -f2) mask_actual=$(cal_netmask_by_prefix $i "-6") if [[ "$mask_expected" != "$mask_actual" ]]; then echo "prefix="$i, "expected="$mask_expected, "acutal="$mask_actual exit fi done echo "IPv6 tests passed" for i in {0..32}; do mask_expected=$(ipcalc -m 8.8.8.8/$i| cut -d"=" -f2) mask_actual=$(cal_netmask_by_prefix $i "") if [[ "$mask_expected" != "$mask_actual" ]]; then echo "prefix="$i, "expected="$mask_expected, "acutal="$mask_actual exit fi done echo "IPv4 tests passed" i=-2 res=$(cal_netmask_by_prefix "$i" "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix<0" exit fi res=$(cal_netmask_by_prefix "$i" "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix<0" exit fi i=33 $(cal_netmask_by_prefix $i "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix>32 for IPv4" exit fi i=129 $(cal_netmask_by_prefix $i "-6") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix>128 for IPv4" exit fi echo "Bad prefixes tests passed" echo "All tests passed" Reported-by: Jie Li <jieli@redhat.com> Signed-off-by: Coiby Xu <coxu@redhat.com> Acked-by: Kairui Song <kasong@redhat.com>
2021-04-08 03:44:26 +00:00
# use condensed notion for IPv6
_third_part=":"
else
_third_part=$(repeatedly_join_str "$_count" "0" "$_seperator")
fi
if [[ -z $_res ]] && ((!_ipv6)); then
Implement IP netmask calculation to replace "ipcalc -m" Recently, dracut-network drops depedency on dhcp-client which requires ipcalc. Thus the dependency chain "kexec-tools -> dracut-network -> dhcp-client -> ipcalc" is broken. When NIC is configured to a static IP, kexec-tools depended on "ipcalc -m" to get netmask. This commit implements the shell equivalent of "ipcalc -m". The following test code shows cal_netmask_by_prefix is consistent with "ipcalc -m", #!/bin/bash . dracut-module-setup.sh for i in {0..128}; do mask_expected=$(ipcalc -m fe::/$i| cut -d"=" -f2) mask_actual=$(cal_netmask_by_prefix $i "-6") if [[ "$mask_expected" != "$mask_actual" ]]; then echo "prefix="$i, "expected="$mask_expected, "acutal="$mask_actual exit fi done echo "IPv6 tests passed" for i in {0..32}; do mask_expected=$(ipcalc -m 8.8.8.8/$i| cut -d"=" -f2) mask_actual=$(cal_netmask_by_prefix $i "") if [[ "$mask_expected" != "$mask_actual" ]]; then echo "prefix="$i, "expected="$mask_expected, "acutal="$mask_actual exit fi done echo "IPv4 tests passed" i=-2 res=$(cal_netmask_by_prefix "$i" "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix<0" exit fi res=$(cal_netmask_by_prefix "$i" "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix<0" exit fi i=33 $(cal_netmask_by_prefix $i "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix>32 for IPv4" exit fi i=129 $(cal_netmask_by_prefix $i "-6") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix>128 for IPv4" exit fi echo "Bad prefixes tests passed" echo "All tests passed" Reported-by: Jie Li <jieli@redhat.com> Signed-off-by: Coiby Xu <coxu@redhat.com> Acked-by: Kairui Song <kasong@redhat.com>
2021-04-08 03:44:26 +00:00
echo -n "${_third_part}"
else
echo -n "${_res}${_seperator}${_third_part}"
fi
}
#$1: netdev name
#$2: srcaddr
#if it use static ip echo it, or echo null
kdump_static_ip() {
rd.route should use the name from kdump_setup_ifname This fixes bz1854037 which happens because kexec-tools generates rd.route for eth0 instead of for kdump-eth0, 1. "rd.route=168.63.129.16:10.0.0.1:eth0 rd.route=169.254.169.254:10.0.0.1:eth0" is passed to the dracut cmdline by kexec-tools 2. In the 2rd kernel, dracut/modules.d/35network-manager/nm-config.sh calls /usr/libexec/nm-initrd-generator to generate two .nmconnection files based on the dracut cmdline, i.e. kdump-eth0.nmconnection and eth0.nmconnection, - /run/NetworkManager/system-connections/kdump-eth0.nmconnection [connection] id=kdump-eth0 uuid=3ef53b1b-3908-437e-a15f-cf1f3ea2678b type=ethernet autoconnect-retries=1 interface-name=kdump-eth0 multi-connect=1 permissions= wait-device-timeout=60000 [ethernet] mac-address-blacklist= [ipv4] address1=10.0.0.4/24,10.0.0.1 dhcp-timeout=90 dns=168.63.129.16; dns-search= may-fail=false method=manual [ipv6] addr-gen-mode=eui64 dhcp-timeout=90 dns-search= method=disabled [proxy] - /run/NetworkManager/system-connections/eth0.nmconnection [connection] id=eth0 uuid=f224dc22-2891-4d7b-8f66-745029df4b53 type=ethernet autoconnect-retries=1 interface-name=eth0 multi-connect=1 permissions= [ethernet] mac-address-blacklist= [ipv4] dhcp-timeout=90 dns=168.63.129.16; dns-search= method=auto route1=168.63.129.16/32,10.0.0.1 route2=169.254.169.254/32,10.0.0.1 [ipv6] addr-gen-mode=eui64 dhcp-timeout=90 dns-search= method=auto [proxy] 3. Since there's eth0.nmconnection, NetworkManager will try to get an IP for eth0 regardless of the fact it's a slave NIC and time out ``` $ ip link show 2: kdump-eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 00:0d:3a:11:86:8b brd ff:ff:ff:ff:ff:ff 3: eth0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master kdump-eth0 state UP mode DEFAULT group default qlen 1000 ``` Reported-by: Huijing Hei <hhei@redhat.com> Signed-off-by: Coiby Xu <coxu@redhat.com> Acked-by: Kairui Song <kasong@redhat.com>
2021-05-06 01:20:27 +00:00
local _netdev="$1" _srcaddr="$2" kdumpnic="$3" _ipv6_flag
Implement IP netmask calculation to replace "ipcalc -m" Recently, dracut-network drops depedency on dhcp-client which requires ipcalc. Thus the dependency chain "kexec-tools -> dracut-network -> dhcp-client -> ipcalc" is broken. When NIC is configured to a static IP, kexec-tools depended on "ipcalc -m" to get netmask. This commit implements the shell equivalent of "ipcalc -m". The following test code shows cal_netmask_by_prefix is consistent with "ipcalc -m", #!/bin/bash . dracut-module-setup.sh for i in {0..128}; do mask_expected=$(ipcalc -m fe::/$i| cut -d"=" -f2) mask_actual=$(cal_netmask_by_prefix $i "-6") if [[ "$mask_expected" != "$mask_actual" ]]; then echo "prefix="$i, "expected="$mask_expected, "acutal="$mask_actual exit fi done echo "IPv6 tests passed" for i in {0..32}; do mask_expected=$(ipcalc -m 8.8.8.8/$i| cut -d"=" -f2) mask_actual=$(cal_netmask_by_prefix $i "") if [[ "$mask_expected" != "$mask_actual" ]]; then echo "prefix="$i, "expected="$mask_expected, "acutal="$mask_actual exit fi done echo "IPv4 tests passed" i=-2 res=$(cal_netmask_by_prefix "$i" "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix<0" exit fi res=$(cal_netmask_by_prefix "$i" "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix<0" exit fi i=33 $(cal_netmask_by_prefix $i "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix>32 for IPv4" exit fi i=129 $(cal_netmask_by_prefix $i "-6") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix>128 for IPv4" exit fi echo "Bad prefixes tests passed" echo "All tests passed" Reported-by: Jie Li <jieli@redhat.com> Signed-off-by: Coiby Xu <coxu@redhat.com> Acked-by: Kairui Song <kasong@redhat.com>
2021-04-08 03:44:26 +00:00
local _netmask _gateway _ipaddr _target _nexthop _prefix
_ipaddr=$(ip addr show dev "$_netdev" permanent | awk "/ $_srcaddr\/.* /{print \$2}")
if is_ipv6_address "$_srcaddr"; then
_ipv6_flag="-6"
fi
if [[ -n $_ipaddr ]]; then
_gateway=$(ip $_ipv6_flag route list dev "$_netdev" \
| awk '/^default /{print $3}' | head -n 1)
if [[ "x" != "x"$_ipv6_flag ]]; then
# _ipaddr="2002::56ff:feb6:56d5/64", _netmask is the number after "/"
_netmask=${_ipaddr#*\/}
_srcaddr="[$_srcaddr]"
_gateway="[$_gateway]"
else
Implement IP netmask calculation to replace "ipcalc -m" Recently, dracut-network drops depedency on dhcp-client which requires ipcalc. Thus the dependency chain "kexec-tools -> dracut-network -> dhcp-client -> ipcalc" is broken. When NIC is configured to a static IP, kexec-tools depended on "ipcalc -m" to get netmask. This commit implements the shell equivalent of "ipcalc -m". The following test code shows cal_netmask_by_prefix is consistent with "ipcalc -m", #!/bin/bash . dracut-module-setup.sh for i in {0..128}; do mask_expected=$(ipcalc -m fe::/$i| cut -d"=" -f2) mask_actual=$(cal_netmask_by_prefix $i "-6") if [[ "$mask_expected" != "$mask_actual" ]]; then echo "prefix="$i, "expected="$mask_expected, "acutal="$mask_actual exit fi done echo "IPv6 tests passed" for i in {0..32}; do mask_expected=$(ipcalc -m 8.8.8.8/$i| cut -d"=" -f2) mask_actual=$(cal_netmask_by_prefix $i "") if [[ "$mask_expected" != "$mask_actual" ]]; then echo "prefix="$i, "expected="$mask_expected, "acutal="$mask_actual exit fi done echo "IPv4 tests passed" i=-2 res=$(cal_netmask_by_prefix "$i" "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix<0" exit fi res=$(cal_netmask_by_prefix "$i" "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix<0" exit fi i=33 $(cal_netmask_by_prefix $i "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix>32 for IPv4" exit fi i=129 $(cal_netmask_by_prefix $i "-6") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix>128 for IPv4" exit fi echo "Bad prefixes tests passed" echo "All tests passed" Reported-by: Jie Li <jieli@redhat.com> Signed-off-by: Coiby Xu <coxu@redhat.com> Acked-by: Kairui Song <kasong@redhat.com>
2021-04-08 03:44:26 +00:00
_prefix=$(cut -d'/' -f2 <<< "$_ipaddr")
if ! _netmask=$(cal_netmask_by_prefix "$_prefix" "$_ipv6_flag"); then
Implement IP netmask calculation to replace "ipcalc -m" Recently, dracut-network drops depedency on dhcp-client which requires ipcalc. Thus the dependency chain "kexec-tools -> dracut-network -> dhcp-client -> ipcalc" is broken. When NIC is configured to a static IP, kexec-tools depended on "ipcalc -m" to get netmask. This commit implements the shell equivalent of "ipcalc -m". The following test code shows cal_netmask_by_prefix is consistent with "ipcalc -m", #!/bin/bash . dracut-module-setup.sh for i in {0..128}; do mask_expected=$(ipcalc -m fe::/$i| cut -d"=" -f2) mask_actual=$(cal_netmask_by_prefix $i "-6") if [[ "$mask_expected" != "$mask_actual" ]]; then echo "prefix="$i, "expected="$mask_expected, "acutal="$mask_actual exit fi done echo "IPv6 tests passed" for i in {0..32}; do mask_expected=$(ipcalc -m 8.8.8.8/$i| cut -d"=" -f2) mask_actual=$(cal_netmask_by_prefix $i "") if [[ "$mask_expected" != "$mask_actual" ]]; then echo "prefix="$i, "expected="$mask_expected, "acutal="$mask_actual exit fi done echo "IPv4 tests passed" i=-2 res=$(cal_netmask_by_prefix "$i" "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix<0" exit fi res=$(cal_netmask_by_prefix "$i" "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix<0" exit fi i=33 $(cal_netmask_by_prefix $i "") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix>32 for IPv4" exit fi i=129 $(cal_netmask_by_prefix $i "-6") if [[ $? -ne 1 ]]; then echo "cal_netmask_by_prefix should exit when prefix>128 for IPv4" exit fi echo "Bad prefixes tests passed" echo "All tests passed" Reported-by: Jie Li <jieli@redhat.com> Signed-off-by: Coiby Xu <coxu@redhat.com> Acked-by: Kairui Song <kasong@redhat.com>
2021-04-08 03:44:26 +00:00
derror "Failed to calculate netmask for $_ipaddr"
exit 1
fi
fi
echo -n "${_srcaddr}::${_gateway}:${_netmask}::"
fi
/sbin/ip $_ipv6_flag route show | grep -v default \
| grep ".*via.* $_netdev " | grep -v "^[[:space:]]*nexthop" \
| while read -r _route; do
_target=$(echo "$_route" | awk '{print $1}')
_nexthop=$(echo "$_route" | awk '{print $3}')
if [[ "x" != "x"$_ipv6_flag ]]; then
_target="[$_target]"
_nexthop="[$_nexthop]"
fi
echo "rd.route=$_target:$_nexthop:$kdumpnic"
done >> "${initdir}/etc/cmdline.d/45route-static.conf"
kdump_handle_mulitpath_route "$_netdev" "$_srcaddr" "$kdumpnic"
}
kdump_handle_mulitpath_route() {
rd.route should use the name from kdump_setup_ifname This fixes bz1854037 which happens because kexec-tools generates rd.route for eth0 instead of for kdump-eth0, 1. "rd.route=168.63.129.16:10.0.0.1:eth0 rd.route=169.254.169.254:10.0.0.1:eth0" is passed to the dracut cmdline by kexec-tools 2. In the 2rd kernel, dracut/modules.d/35network-manager/nm-config.sh calls /usr/libexec/nm-initrd-generator to generate two .nmconnection files based on the dracut cmdline, i.e. kdump-eth0.nmconnection and eth0.nmconnection, - /run/NetworkManager/system-connections/kdump-eth0.nmconnection [connection] id=kdump-eth0 uuid=3ef53b1b-3908-437e-a15f-cf1f3ea2678b type=ethernet autoconnect-retries=1 interface-name=kdump-eth0 multi-connect=1 permissions= wait-device-timeout=60000 [ethernet] mac-address-blacklist= [ipv4] address1=10.0.0.4/24,10.0.0.1 dhcp-timeout=90 dns=168.63.129.16; dns-search= may-fail=false method=manual [ipv6] addr-gen-mode=eui64 dhcp-timeout=90 dns-search= method=disabled [proxy] - /run/NetworkManager/system-connections/eth0.nmconnection [connection] id=eth0 uuid=f224dc22-2891-4d7b-8f66-745029df4b53 type=ethernet autoconnect-retries=1 interface-name=eth0 multi-connect=1 permissions= [ethernet] mac-address-blacklist= [ipv4] dhcp-timeout=90 dns=168.63.129.16; dns-search= method=auto route1=168.63.129.16/32,10.0.0.1 route2=169.254.169.254/32,10.0.0.1 [ipv6] addr-gen-mode=eui64 dhcp-timeout=90 dns-search= method=auto [proxy] 3. Since there's eth0.nmconnection, NetworkManager will try to get an IP for eth0 regardless of the fact it's a slave NIC and time out ``` $ ip link show 2: kdump-eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 00:0d:3a:11:86:8b brd ff:ff:ff:ff:ff:ff 3: eth0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master kdump-eth0 state UP mode DEFAULT group default qlen 1000 ``` Reported-by: Huijing Hei <hhei@redhat.com> Signed-off-by: Coiby Xu <coxu@redhat.com> Acked-by: Kairui Song <kasong@redhat.com>
2021-05-06 01:20:27 +00:00
local _netdev="$1" _srcaddr="$2" kdumpnic="$3" _ipv6_flag
local _target _nexthop _route _weight _max_weight _rule
if is_ipv6_address "$_srcaddr"; then
_ipv6_flag="-6"
fi
while IFS="" read -r _route; do
if [[ $_route =~ [[:space:]]+nexthop ]]; then
_route=${_route##[[:space:]]}
# Parse multipath route, using previous _target
[[ $_target == 'default' ]] && continue
[[ $_route =~ .*via.*\ $_netdev ]] || continue
_weight=$(echo "$_route" | cut -d ' ' -f7)
if [[ $_weight -gt $_max_weight ]]; then
_nexthop=$(echo "$_route" | cut -d ' ' -f3)
_max_weight=$_weight
if [[ "x" != "x"$_ipv6_flag ]]; then
rd.route should use the name from kdump_setup_ifname This fixes bz1854037 which happens because kexec-tools generates rd.route for eth0 instead of for kdump-eth0, 1. "rd.route=168.63.129.16:10.0.0.1:eth0 rd.route=169.254.169.254:10.0.0.1:eth0" is passed to the dracut cmdline by kexec-tools 2. In the 2rd kernel, dracut/modules.d/35network-manager/nm-config.sh calls /usr/libexec/nm-initrd-generator to generate two .nmconnection files based on the dracut cmdline, i.e. kdump-eth0.nmconnection and eth0.nmconnection, - /run/NetworkManager/system-connections/kdump-eth0.nmconnection [connection] id=kdump-eth0 uuid=3ef53b1b-3908-437e-a15f-cf1f3ea2678b type=ethernet autoconnect-retries=1 interface-name=kdump-eth0 multi-connect=1 permissions= wait-device-timeout=60000 [ethernet] mac-address-blacklist= [ipv4] address1=10.0.0.4/24,10.0.0.1 dhcp-timeout=90 dns=168.63.129.16; dns-search= may-fail=false method=manual [ipv6] addr-gen-mode=eui64 dhcp-timeout=90 dns-search= method=disabled [proxy] - /run/NetworkManager/system-connections/eth0.nmconnection [connection] id=eth0 uuid=f224dc22-2891-4d7b-8f66-745029df4b53 type=ethernet autoconnect-retries=1 interface-name=eth0 multi-connect=1 permissions= [ethernet] mac-address-blacklist= [ipv4] dhcp-timeout=90 dns=168.63.129.16; dns-search= method=auto route1=168.63.129.16/32,10.0.0.1 route2=169.254.169.254/32,10.0.0.1 [ipv6] addr-gen-mode=eui64 dhcp-timeout=90 dns-search= method=auto [proxy] 3. Since there's eth0.nmconnection, NetworkManager will try to get an IP for eth0 regardless of the fact it's a slave NIC and time out ``` $ ip link show 2: kdump-eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 00:0d:3a:11:86:8b brd ff:ff:ff:ff:ff:ff 3: eth0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master kdump-eth0 state UP mode DEFAULT group default qlen 1000 ``` Reported-by: Huijing Hei <hhei@redhat.com> Signed-off-by: Coiby Xu <coxu@redhat.com> Acked-by: Kairui Song <kasong@redhat.com>
2021-05-06 01:20:27 +00:00
_rule="rd.route=[$_target]:[$_nexthop]:$kdumpnic"
else
rd.route should use the name from kdump_setup_ifname This fixes bz1854037 which happens because kexec-tools generates rd.route for eth0 instead of for kdump-eth0, 1. "rd.route=168.63.129.16:10.0.0.1:eth0 rd.route=169.254.169.254:10.0.0.1:eth0" is passed to the dracut cmdline by kexec-tools 2. In the 2rd kernel, dracut/modules.d/35network-manager/nm-config.sh calls /usr/libexec/nm-initrd-generator to generate two .nmconnection files based on the dracut cmdline, i.e. kdump-eth0.nmconnection and eth0.nmconnection, - /run/NetworkManager/system-connections/kdump-eth0.nmconnection [connection] id=kdump-eth0 uuid=3ef53b1b-3908-437e-a15f-cf1f3ea2678b type=ethernet autoconnect-retries=1 interface-name=kdump-eth0 multi-connect=1 permissions= wait-device-timeout=60000 [ethernet] mac-address-blacklist= [ipv4] address1=10.0.0.4/24,10.0.0.1 dhcp-timeout=90 dns=168.63.129.16; dns-search= may-fail=false method=manual [ipv6] addr-gen-mode=eui64 dhcp-timeout=90 dns-search= method=disabled [proxy] - /run/NetworkManager/system-connections/eth0.nmconnection [connection] id=eth0 uuid=f224dc22-2891-4d7b-8f66-745029df4b53 type=ethernet autoconnect-retries=1 interface-name=eth0 multi-connect=1 permissions= [ethernet] mac-address-blacklist= [ipv4] dhcp-timeout=90 dns=168.63.129.16; dns-search= method=auto route1=168.63.129.16/32,10.0.0.1 route2=169.254.169.254/32,10.0.0.1 [ipv6] addr-gen-mode=eui64 dhcp-timeout=90 dns-search= method=auto [proxy] 3. Since there's eth0.nmconnection, NetworkManager will try to get an IP for eth0 regardless of the fact it's a slave NIC and time out ``` $ ip link show 2: kdump-eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 00:0d:3a:11:86:8b brd ff:ff:ff:ff:ff:ff 3: eth0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master kdump-eth0 state UP mode DEFAULT group default qlen 1000 ``` Reported-by: Huijing Hei <hhei@redhat.com> Signed-off-by: Coiby Xu <coxu@redhat.com> Acked-by: Kairui Song <kasong@redhat.com>
2021-05-06 01:20:27 +00:00
_rule="rd.route=$_target:$_nexthop:$kdumpnic"
fi
fi
else
[[ -n $_rule ]] && echo "$_rule"
_target=$(echo "$_route" | cut -d ' ' -f1)
_rule="" _max_weight=0 _weight=0
fi
done >> "${initdir}/etc/cmdline.d/45route-static.conf" \
<<< "$(/sbin/ip $_ipv6_flag route show)"
[[ -n $_rule ]] && echo "$_rule" >> "${initdir}/etc/cmdline.d/45route-static.conf"
}
kdump_get_mac_addr() {
cat "/sys/class/net/$1/address"
}
#Bonding or team master modifies the mac address
#of its slaves, we should use perm address
kdump_get_perm_addr() {
local addr
addr=$(ethtool -P "$1" | sed -e 's/Permanent address: //')
if [[ -z $addr ]] || [[ $addr == "00:00:00:00:00:00" ]]; then
derror "Can't get the permanent address of $1"
else
echo "$addr"
fi
}
# Prefix kernel assigned names with "kdump-". EX: eth0 -> kdump-eth0
# Because kernel assigned names are not persistent between 1st and 2nd
# kernel. We could probably end up with eth0 being eth1, eth0 being
# eth1, and naming conflict happens.
kdump_setup_ifname() {
local _ifname
kdump/fadump: fix network interface name when switching from fadump to kdump When a remote dump target is specified, kdump dracut module prefixes 'kdump-' to network interface name (ifname) as kernel assigned names are not persistent. In fadump mode, kdump dracut module is added to the default initrd, which adds the 'kdump-' prefix to the ifname of the prodcution kernel itself. If fadump mode is disabled after this, kdump dracut module picks the ifname that is already prefixed with 'kdump-' in the production kernel and adds another 'kdump-' to it, making the ifname something like kdump-kdump-eth0 for kdump kernel. Eventually, kdump kernel fails with below traces: dracut-initqueue[246]: RTNETLINK answers: Network is unreachable dracut-initqueue[246]: arping: Device kdump-kdump-eth0 not available. The ip command shows the below: kdump:/# ip addr show kdump-kdump-eth0 2: kdump-kdump-eth: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 \ qdisc pfifo_fast state UNKNOWN qlen 1000 link/ether 22:82:87:7b:98:02 brd ff:ff:ff:ff:ff:ff inet6 2002:903:15f:550:2082:87ff:fe7b:9802/64 scope global \ mngtmpaddr dynamic valid_lft 2591890sec preferred_lft 604690sec inet6 fe80::2082:87ff:fe7b:9802/64 scope link valid_lft forever preferred_lft forever kdump:/# The trailing 0 from kdump-kdump-eth0 is missing in the ifname, probably truncated owing to ifname length limit, while setting. This patch fixes this by avoiding addition of the prefix 'kdump-' when such prefix is already present in the ifname. Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com>
2016-11-03 18:46:14 +00:00
# If ifname already has 'kdump-' prefix, we must be switching from
# fadump to kdump. Skip prefixing 'kdump-' in this case as adding
# another prefix may truncate the ifname. Since an ifname with
# 'kdump-' is already persistent, this should be fine.
if [[ $1 =~ eth* ]] && [[ ! $1 =~ ^kdump-* ]]; then
_ifname="kdump-$1"
else
_ifname="$1"
fi
echo "$_ifname"
}
kdump_setup_bridge() {
local _netdev=$1
local _brif _dev _mac _kdumpdev
for _dev in "/sys/class/net/$_netdev/brif/"*; do
[[ -e $_dev ]] || continue
_dev=${_dev##*/}
_kdumpdev=$_dev
if kdump_is_bond "$_dev"; then
(kdump_setup_bond "$_dev" "$(get_nmcli_connection_show_cmd_by_ifname "$_dev")") || exit 1
elif kdump_is_team "$_dev"; then
kdump_setup_team "$_dev"
elif kdump_is_vlan "$_dev"; then
kdump_setup_vlan "$_dev"
else
_mac=$(kdump_get_mac_addr "$_dev")
_kdumpdev=$(kdump_setup_ifname "$_dev")
echo -n " ifname=$_kdumpdev:$_mac" >> "${initdir}/etc/cmdline.d/41bridge.conf"
fi
_brif+="$_kdumpdev,"
done
echo " bridge=$_netdev:${_brif%,}" >> "${initdir}/etc/cmdline.d/41bridge.conf"
}
# drauct takes bond=<bondname>[:<bondslaves>:[:<options>]] syntax to parse
# bond. For example:
# bond=bond0:eth0,eth1:mode=balance-rr
kdump_setup_bond() {
local _netdev="$1"
local _nm_show_cmd="$2"
local _dev _mac _slaves _kdumpdev _bondoptions
for _dev in $(cat "/sys/class/net/$_netdev/bonding/slaves"); do
_mac=$(kdump_get_perm_addr "$_dev")
_kdumpdev=$(kdump_setup_ifname "$_dev")
echo -n " ifname=$_kdumpdev:$_mac" >> "${initdir}/etc/cmdline.d/42bond.conf"
_slaves+="$_kdumpdev,"
done
echo -n " bond=$_netdev:${_slaves%,}" >> "${initdir}/etc/cmdline.d/42bond.conf"
_bondoptions=$(get_nmcli_value_by_field "$_nm_show_cmd" "bond.options")
if [[ -z $_bondoptions ]]; then
dwarning "Failed to get bond configuration via nmlci output. Now try sourcing ifcfg script."
source_ifcfg_file "$_netdev"
_bondoptions="$(echo "$BONDING_OPTS" | xargs echo | tr " " ",")"
fi
if [[ -z $_bondoptions ]]; then
derror "Get empty bond options"
exit 1
fi
echo ":$_bondoptions" >> "${initdir}/etc/cmdline.d/42bond.conf"
}
kdump_setup_team() {
local _netdev=$1
local _dev _mac _slaves _kdumpdev
for _dev in $(teamnl "$_netdev" ports | awk -F':' '{print $2}'); do
_mac=$(kdump_get_perm_addr "$_dev")
_kdumpdev=$(kdump_setup_ifname "$_dev")
echo -n " ifname=$_kdumpdev:$_mac" >> "${initdir}/etc/cmdline.d/44team.conf"
_slaves+="$_kdumpdev,"
done
echo " team=$_netdev:${_slaves%,}" >> "${initdir}/etc/cmdline.d/44team.conf"
#Buggy version teamdctl outputs to stderr!
#Try to use the latest version of teamd.
if ! teamdctl "$_netdev" config dump > "${initdir}/tmp/$$-$_netdev.conf"; then
derror "teamdctl failed."
exit 1
fi
inst_dir /etc/teamd
inst_simple "${initdir}/tmp/$$-$_netdev.conf" "/etc/teamd/$_netdev.conf"
rm -f "${initdir}/tmp/$$-$_netdev.conf"
}
kdump_setup_vlan() {
local _netdev=$1
local _phydev
local _netmac
local _kdumpdev
_phydev="$(awk '/^Device:/{print $2}' /proc/net/vlan/"$_netdev")"
_netmac="$(kdump_get_mac_addr "$_phydev")"
#Just support vlan over bond and team
if kdump_is_bridge "$_phydev"; then
derror "Vlan over bridge is not supported!"
exit 1
elif kdump_is_bond "$_phydev"; then
(kdump_setup_bond "$_phydev" "$(get_nmcli_connection_show_cmd_by_ifname "$_phydev")") || exit 1
echo " vlan=$(kdump_setup_ifname "$_netdev"):$_phydev" > "${initdir}/etc/cmdline.d/43vlan.conf"
else
_kdumpdev="$(kdump_setup_ifname "$_phydev")"
echo " vlan=$(kdump_setup_ifname "$_netdev"):$_kdumpdev ifname=$_kdumpdev:$_netmac" > "${initdir}/etc/cmdline.d/43vlan.conf"
fi
}
Iterate /sys/bus/ccwgroup/devices to tell if we should set up rd.znet This patch fixes bz1941106 and bz1941905 which passed empty rd.znet to the kernel command line in the following cases, - The IBM (Z15) KVM guest uses virtio for all devices including network device, so there is no znet device for IBM KVM guest. So we can't assume a s390x machine always has a znet device. - When a bridged network is used, kexec-tools tries to obtain the znet configuration from the ifcfg script of the bridged network rather than from the ifcfg script of znet device. We can iterate /sys/bus/ccwgroup/devices to tell if there if there is a znet network device. By getting an ifname from znet, we can also avoid mistaking the slave netdev as a znet network device in a bridged network or bonded network. Note: This patch also assumes there is only one znet device as commit 7148c0a30dfc48221eadf255e8a89619f98a8752 ("add s390x netdev setup") which greatly simplifies the code. According to IBM [1], there could be more than znet devices for a z/VM system and a z/VM system may have a non-znet network device like ConnectX. Since kdump_setup_znet was introduced in 2012 and so far there is no known customer complaint that invalidates this assumption I think it's safe to assume an IBM z/VM system only has one znet device. Besides, there is no z/VM system found on beaker to test the alternative scenarios. [1] https://bugzilla.redhat.com/show_bug.cgi?id=1941905#c13 Signed-off-by: Coiby Xu <coxu@redhat.com> Acked-by: Kairui Song <kasong@redhat.com>
2021-06-06 23:26:03 +00:00
# find online znet device
# return ifname (_netdev)
# code reaped from the list_configured function of
# https://github.com/hreinecke/s390-tools/blob/master/zconf/znetconf
find_online_znet_device() {
local CCWGROUPBUS_DEVICEDIR="/sys/bus/ccwgroup/devices"
local NETWORK_DEVICES d ifname ONLINE
[[ ! -d $CCWGROUPBUS_DEVICEDIR ]] && return
NETWORK_DEVICES=$(find $CCWGROUPBUS_DEVICEDIR)
for d in $NETWORK_DEVICES; do
[[ ! -f "$d/online" ]] && continue
read -r ONLINE < "$d/online"
if [[ $ONLINE -ne 1 ]]; then
continue
fi
# determine interface name, if there (only for qeth and if
# device is online)
if [[ -f $d/if_name ]]; then
read -r ifname < "$d/if_name"
elif [[ -d $d/net ]]; then
ifname=$(ls "$d/net/")
fi
[[ -n $ifname ]] && break
done
echo -n "$ifname"
Iterate /sys/bus/ccwgroup/devices to tell if we should set up rd.znet This patch fixes bz1941106 and bz1941905 which passed empty rd.znet to the kernel command line in the following cases, - The IBM (Z15) KVM guest uses virtio for all devices including network device, so there is no znet device for IBM KVM guest. So we can't assume a s390x machine always has a znet device. - When a bridged network is used, kexec-tools tries to obtain the znet configuration from the ifcfg script of the bridged network rather than from the ifcfg script of znet device. We can iterate /sys/bus/ccwgroup/devices to tell if there if there is a znet network device. By getting an ifname from znet, we can also avoid mistaking the slave netdev as a znet network device in a bridged network or bonded network. Note: This patch also assumes there is only one znet device as commit 7148c0a30dfc48221eadf255e8a89619f98a8752 ("add s390x netdev setup") which greatly simplifies the code. According to IBM [1], there could be more than znet devices for a z/VM system and a z/VM system may have a non-znet network device like ConnectX. Since kdump_setup_znet was introduced in 2012 and so far there is no known customer complaint that invalidates this assumption I think it's safe to assume an IBM z/VM system only has one znet device. Besides, there is no z/VM system found on beaker to test the alternative scenarios. [1] https://bugzilla.redhat.com/show_bug.cgi?id=1941905#c13 Signed-off-by: Coiby Xu <coxu@redhat.com> Acked-by: Kairui Song <kasong@redhat.com>
2021-06-06 23:26:03 +00:00
}
# setup s390 znet cmdline
# $1: netdev (ifname)
# $2: nmcli connection show output
kdump_setup_znet() {
local _netdev="$1"
local _nmcli_cmd="$2"
local s390_prefix="802-3-ethernet.s390-"
local _options=""
local NETTYPE
local SUBCHANNELS
NETTYPE=$(get_nmcli_value_by_field "$_nmcli_cmd" "${s390_prefix}nettype")
SUBCHANNELS=$(get_nmcli_value_by_field "$_nmcli_cmd" "${s390_prefix}subchannels")
_options=$(get_nmcli_value_by_field "$_nmcli_cmd" "${s390_prefix}options")
if [[ -z $NETTYPE || -z $SUBCHANNELS || -z $_options ]]; then
dwarning "Failed to get znet configuration via nmlci output. Now try sourcing ifcfg script."
source_ifcfg_file "$_netdev"
for i in $OPTIONS; do
_options=${_options},$i
done
fi
if [[ -z $NETTYPE || -z $SUBCHANNELS || -z $_options ]]; then
exit 1
fi
echo "rd.znet=${NETTYPE},${SUBCHANNELS},${_options} rd.znet_ifname=$_netdev:${SUBCHANNELS}" > "${initdir}/etc/cmdline.d/30znet.conf"
}
kdump_get_ip_route() {
local _route
if ! _route=$(/sbin/ip -o route get to "$1" 2>&1); then
derror "Bad kdump network destination: $1"
exit 1
fi
echo "$_route"
}
kdump_get_ip_route_field() {
echo "$1" | sed -n -e "s/^.*\<$2\>\s\+\(\S\+\).*$/\1/p"
}
kdump_get_remote_ip() {
local _remote _remote_temp
_remote=$(get_remote_host "$1")
if is_hostname "$_remote"; then
_remote_temp=$(getent ahosts "$_remote" | grep -v : | head -n 1)
if [[ -z $_remote_temp ]]; then
_remote_temp=$(getent ahosts "$_remote" | head -n 1)
fi
_remote=$(echo "$_remote_temp" | awk '{print $1}')
fi
echo "$_remote"
}
# Setup dracut to bring up network interface that enable
# initramfs accessing giving destination
# $1: destination host
kdump_install_net() {
local _destaddr _srcaddr _route _netdev _nm_show_cmd kdumpnic
local _static _proto _ip_conf _ip_opts _ifname_opts
Iterate /sys/bus/ccwgroup/devices to tell if we should set up rd.znet This patch fixes bz1941106 and bz1941905 which passed empty rd.znet to the kernel command line in the following cases, - The IBM (Z15) KVM guest uses virtio for all devices including network device, so there is no znet device for IBM KVM guest. So we can't assume a s390x machine always has a znet device. - When a bridged network is used, kexec-tools tries to obtain the znet configuration from the ifcfg script of the bridged network rather than from the ifcfg script of znet device. We can iterate /sys/bus/ccwgroup/devices to tell if there if there is a znet network device. By getting an ifname from znet, we can also avoid mistaking the slave netdev as a znet network device in a bridged network or bonded network. Note: This patch also assumes there is only one znet device as commit 7148c0a30dfc48221eadf255e8a89619f98a8752 ("add s390x netdev setup") which greatly simplifies the code. According to IBM [1], there could be more than znet devices for a z/VM system and a z/VM system may have a non-znet network device like ConnectX. Since kdump_setup_znet was introduced in 2012 and so far there is no known customer complaint that invalidates this assumption I think it's safe to assume an IBM z/VM system only has one znet device. Besides, there is no z/VM system found on beaker to test the alternative scenarios. [1] https://bugzilla.redhat.com/show_bug.cgi?id=1941905#c13 Signed-off-by: Coiby Xu <coxu@redhat.com> Acked-by: Kairui Song <kasong@redhat.com>
2021-06-06 23:26:03 +00:00
local _znet_netdev _nm_show_cmd_znet
_destaddr=$(kdump_get_remote_ip "$1")
_route=$(kdump_get_ip_route "$_destaddr")
_srcaddr=$(kdump_get_ip_route_field "$_route" "src")
_netdev=$(kdump_get_ip_route_field "$_route" "dev")
_nm_show_cmd=$(get_nmcli_connection_show_cmd_by_ifname "$_netdev")
_netmac=$(kdump_get_mac_addr "$_netdev")
kdumpnic=$(kdump_setup_ifname "$_netdev")
Iterate /sys/bus/ccwgroup/devices to tell if we should set up rd.znet This patch fixes bz1941106 and bz1941905 which passed empty rd.znet to the kernel command line in the following cases, - The IBM (Z15) KVM guest uses virtio for all devices including network device, so there is no znet device for IBM KVM guest. So we can't assume a s390x machine always has a znet device. - When a bridged network is used, kexec-tools tries to obtain the znet configuration from the ifcfg script of the bridged network rather than from the ifcfg script of znet device. We can iterate /sys/bus/ccwgroup/devices to tell if there if there is a znet network device. By getting an ifname from znet, we can also avoid mistaking the slave netdev as a znet network device in a bridged network or bonded network. Note: This patch also assumes there is only one znet device as commit 7148c0a30dfc48221eadf255e8a89619f98a8752 ("add s390x netdev setup") which greatly simplifies the code. According to IBM [1], there could be more than znet devices for a z/VM system and a z/VM system may have a non-znet network device like ConnectX. Since kdump_setup_znet was introduced in 2012 and so far there is no known customer complaint that invalidates this assumption I think it's safe to assume an IBM z/VM system only has one znet device. Besides, there is no z/VM system found on beaker to test the alternative scenarios. [1] https://bugzilla.redhat.com/show_bug.cgi?id=1941905#c13 Signed-off-by: Coiby Xu <coxu@redhat.com> Acked-by: Kairui Song <kasong@redhat.com>
2021-06-06 23:26:03 +00:00
_znet_netdev=$(find_online_znet_device)
if [[ -n $_znet_netdev ]]; then
Iterate /sys/bus/ccwgroup/devices to tell if we should set up rd.znet This patch fixes bz1941106 and bz1941905 which passed empty rd.znet to the kernel command line in the following cases, - The IBM (Z15) KVM guest uses virtio for all devices including network device, so there is no znet device for IBM KVM guest. So we can't assume a s390x machine always has a znet device. - When a bridged network is used, kexec-tools tries to obtain the znet configuration from the ifcfg script of the bridged network rather than from the ifcfg script of znet device. We can iterate /sys/bus/ccwgroup/devices to tell if there if there is a znet network device. By getting an ifname from znet, we can also avoid mistaking the slave netdev as a znet network device in a bridged network or bonded network. Note: This patch also assumes there is only one znet device as commit 7148c0a30dfc48221eadf255e8a89619f98a8752 ("add s390x netdev setup") which greatly simplifies the code. According to IBM [1], there could be more than znet devices for a z/VM system and a z/VM system may have a non-znet network device like ConnectX. Since kdump_setup_znet was introduced in 2012 and so far there is no known customer complaint that invalidates this assumption I think it's safe to assume an IBM z/VM system only has one znet device. Besides, there is no z/VM system found on beaker to test the alternative scenarios. [1] https://bugzilla.redhat.com/show_bug.cgi?id=1941905#c13 Signed-off-by: Coiby Xu <coxu@redhat.com> Acked-by: Kairui Song <kasong@redhat.com>
2021-06-06 23:26:03 +00:00
_nm_show_cmd_znet=$(get_nmcli_connection_show_cmd_by_ifname "$_znet_netdev")
if ! (kdump_setup_znet "$_znet_netdev" "$_nm_show_cmd_znet"); then
derror "Failed to set up znet"
exit 1
fi
fi
_static=$(kdump_static_ip "$_netdev" "$_srcaddr" "$kdumpnic")
if [[ -n $_static ]]; then
_proto=none
elif is_ipv6_address "$_srcaddr"; then
_proto=auto6
else
_proto=dhcp
fi
_ip_conf="${initdir}/etc/cmdline.d/40ip.conf"
_ip_opts=" ip=${_static}$kdumpnic:${_proto}"
# dracut doesn't allow duplicated configuration for same NIC, even they're exactly the same.
# so we have to avoid adding duplicates
# We should also check /proc/cmdline for existing ip=xx arg.
# For example, iscsi boot will specify ip=xxx arg in cmdline.
if [[ ! -f $_ip_conf ]] || ! grep -q "$_ip_opts" "$_ip_conf" \
&& ! grep -q "ip=[^[:space:]]*$_netdev" /proc/cmdline; then
echo "$_ip_opts" >> "$_ip_conf"
fi
if kdump_is_bridge "$_netdev"; then
kdump_setup_bridge "$_netdev"
elif kdump_is_bond "$_netdev"; then
(kdump_setup_bond "$_netdev" "$_nm_show_cmd") || exit 1
elif kdump_is_team "$_netdev"; then
kdump_setup_team "$_netdev"
elif kdump_is_vlan "$_netdev"; then
kdump_setup_vlan "$_netdev"
else
_ifname_opts=" ifname=$kdumpnic:$_netmac"
echo "$_ifname_opts" >> "$_ip_conf"
fi
kdump_setup_dns "$_netdev" "$_nm_show_cmd"
if [[ ! -f ${initdir}/etc/cmdline.d/50neednet.conf ]]; then
# network-manager module needs this parameter
echo "rd.neednet" >> "${initdir}/etc/cmdline.d/50neednet.conf"
fi
# Save netdev used for kdump as cmdline
# Whoever calling kdump_install_net() is setting up the default gateway,
# ie. bootdev/kdumpnic. So don't override the setting if calling
# kdump_install_net() for another time. For example, after setting eth0 as
# the default gate way for network dump, eth1 in the fence kdump path will
# call kdump_install_net again and we don't want eth1 to be the default
# gateway.
if [[ ! -f ${initdir}/etc/cmdline.d/60kdumpnic.conf ]] \
&& [[ ! -f ${initdir}/etc/cmdline.d/70bootdev.conf ]]; then
echo "kdumpnic=$kdumpnic" > "${initdir}/etc/cmdline.d/60kdumpnic.conf"
echo "bootdev=$kdumpnic" > "${initdir}/etc/cmdline.d/70bootdev.conf"
fi
}
# install etc/kdump/pre.d and /etc/kdump/post.d
kdump_install_pre_post_conf() {
if [[ -d /etc/kdump/pre.d ]]; then
for file in /etc/kdump/pre.d/*; do
if [[ -x $file ]]; then
dracut_install "$file"
elif [[ $file != "/etc/kdump/pre.d/*" ]]; then
echo "$file is not executable"
fi
done
fi
if [[ -d /etc/kdump/post.d ]]; then
for file in /etc/kdump/post.d/*; do
if [[ -x $file ]]; then
dracut_install "$file"
elif [[ $file != "/etc/kdump/post.d/*" ]]; then
echo "$file is not executable"
fi
done
fi
}
default_dump_target_install_conf() {
local _target _fstype
local _mntpoint _save_path
is_user_configured_dump_target && return
_save_path=$(get_bind_mount_source "$(get_save_path)")
_target=$(get_target_from_path "$_save_path")
_mntpoint=$(get_mntpoint_from_target "$_target")
_fstype=$(get_fs_type_from_target "$_target")
if is_fs_type_nfs "$_fstype"; then
kdump_install_net "$_target"
_fstype="nfs"
else
_target=$(kdump_get_persistent_dev "$_target")
fi
echo "$_fstype $_target" >> "${initdir}/tmp/$$-kdump.conf"
# don't touch the path under root mount
if [[ $_mntpoint != "/" ]]; then
_save_path=${_save_path##"$_mntpoint"}
fi
#erase the old path line, then insert the parsed path
sed -i "/^path/d" "${initdir}/tmp/$$-kdump.conf"
echo "path $_save_path" >> "${initdir}/tmp/$$-kdump.conf"
}
#install kdump.conf and what user specifies in kdump.conf
kdump_install_conf() {
local _opt _val _pdev
kdump_read_conf > "${initdir}/tmp/$$-kdump.conf"
while read -r _opt _val; do
# remove inline comments after the end of a directive.
case "$_opt" in
raw)
_pdev=$(persistent_policy="by-id" kdump_get_persistent_dev "$_val")
sed -i -e "s#^${_opt}[[:space:]]\+$_val#$_opt $_pdev#" "${initdir}/tmp/$$-kdump.conf"
;;
ext[234] | xfs | btrfs | minix)
_pdev=$(kdump_get_persistent_dev "$_val")
sed -i -e "s#^${_opt}[[:space:]]\+$_val#$_opt $_pdev#" "${initdir}/tmp/$$-kdump.conf"
;;
ssh | nfs)
kdump_install_net "$_val"
;;
dracut_args)
if [[ $(get_dracut_args_fstype "$_val") == nfs* ]]; then
kdump_install_net "$(get_dracut_args_target "$_val")"
fi
;;
kdump_pre | kdump_post | extra_bins)
dracut_install "$_val"
;;
core_collector)
dracut_install "${_val%%[[:blank:]]*}"
;;
esac
done <<< "$(kdump_read_conf)"
kdump_install_pre_post_conf
default_dump_target_install_conf
kdump_configure_fence_kdump "${initdir}/tmp/$$-kdump.conf"
inst "${initdir}/tmp/$$-kdump.conf" "/etc/kdump.conf"
rm -f "${initdir}/tmp/$$-kdump.conf"
}
# Default sysctl parameters should suffice for kdump kernel.
# Remove custom configurations sysctl.conf & sysctl.d/*
remove_sysctl_conf() {
# As custom configurations like vm.min_free_kbytes can lead
# to OOM issues in kdump kernel, avoid them
rm -f "${initdir}/etc/sysctl.conf"
rm -rf "${initdir}/etc/sysctl.d"
rm -rf "${initdir}/run/sysctl.d"
rm -rf "${initdir}/usr/lib/sysctl.d"
}
kdump_iscsi_get_rec_val() {
local result
# The open-iscsi 742 release changed to using flat files in
# /var/lib/iscsi.
result=$(/sbin/iscsiadm --show -m session -r "$1" | grep "^${2} = ")
result=${result##* = }
echo "$result"
}
kdump_get_iscsi_initiator() {
local _initiator
local initiator_conf="/etc/iscsi/initiatorname.iscsi"
[[ -f $initiator_conf ]] || return 1
while read -r _initiator; do
[[ -z ${_initiator%%#*} ]] && continue # Skip comment lines
case $_initiator in
InitiatorName=*)
initiator=${_initiator#InitiatorName=}
echo "rd.iscsi.initiator=${initiator}"
return 0
;;
*) ;;
esac
done < ${initiator_conf}
return 1
}
# Figure out iBFT session according to session type
is_ibft() {
[[ "$(kdump_iscsi_get_rec_val "$1" "node.discovery_type")" == fw ]]
}
kdump_setup_iscsi_device() {
local path=$1
local tgt_name
local tgt_ipaddr
local username
local password
local userpwd_str
local username_in
local password_in
local userpwd_in_str
local netroot_str
local initiator_str
local netroot_conf="${initdir}/etc/cmdline.d/50iscsi.conf"
local initiator_conf="/etc/iscsi/initiatorname.iscsi"
dinfo "Found iscsi component $1"
module-setup: suppress the early iscsi error messages Currently, we throw the error message at the very beginning, as a result on a pure-hardware(all-offload) iscsi machine with many iscsi partitions, we suffered from too much noise as follows: iscsiadm: No records found Unable to find iscsi record for /sys/devices/pci0000:00/0000:00:06.0/0000:07:00.0/0000:08:01.1/host0/session1 iscsiadm: No records found Unable to find iscsi record for /sys/devices/pci0000:00/0000:00:06.0/0000:07:00.0/0000:08:01.3/host1/session2 iscsiadm: No records found Unable to find iscsi record for /sys/devices/pci0000:00/0000:00:06.0/0000:07:00.0/0000:08:01.1/host0/session1 iscsiadm: No records found Unable to find iscsi record for /sys/devices/pci0000:00/0000:00:06.0/0000:07:00.0/0000:08:01.3/host1/session2 iscsiadm: No records found Unable to find iscsi record for /sys/devices/pci0000:00/0000:00:06.0/0000:07:00.0/0000:08:01.1/host0/session1 iscsiadm: No records found Unable to find iscsi record for /sys/devices/pci0000:00/0000:00:06.0/0000:07:00.0/0000:08:01.3/host1/session2 iscsiadm: No records found Unable to find iscsi record for /sys/devices/pci0000:00/0000:00:06.0/0000:07:00.0/0000:08:01.1/host0/session1 iscsiadm: No records found Unable to find iscsi record for /sys/devices/pci0000:00/0000:00:06.0/0000:07:00.0/0000:08:01.3/host1/session2 iscsiadm: No records found Unable to find iscsi record for /sys/devices/pci0000:00/0000:00:06.0/0000:07:00.0/0000:08:01.1/host0/session1 iscsiadm: No records found Unable to find iscsi record for /sys/devices/pci0000:00/0000:00:06.0/0000:07:00.0/0000:08:01.3/host1/session2 kexec: loaded kdump kernel Starting kdump: [OK] There's no need to know the very early error messages, we can remove the error output which is actually normal for the pure hardware iscsi. As for unexpected errors, we kept the error outputs in the succeeding kdump_iscsi_get_rec_val() calls by not appending "2>/dev/null". Signed-off-by: Xunlei Pang <xlpang@redhat.com> Acked-by: Dave Young <dyoung@redhat.com>
2017-07-24 13:31:39 +00:00
# Check once before getting explicit values, so we can bail out early,
# e.g. in case of pure-hardware(all-offload) iscsi.
if ! /sbin/iscsiadm -m session -r "$path" &> /dev/null; then
return 1
fi
if is_ibft "$path"; then
return
fi
# Remove software iscsi cmdline generated by 95iscsi,
# and let kdump regenerate here.
rm -f "${initdir}/etc/cmdline.d/95iscsi.conf"
tgt_name=$(kdump_iscsi_get_rec_val "$path" "node.name")
tgt_ipaddr=$(kdump_iscsi_get_rec_val "$path" "node.conn\[0\].address")
# get and set username and password details
username=$(kdump_iscsi_get_rec_val "$path" "node.session.auth.username")
[[ $username == "<empty>" ]] && username=""
password=$(kdump_iscsi_get_rec_val "$path" "node.session.auth.password")
[[ $password == "<empty>" ]] && password=""
username_in=$(kdump_iscsi_get_rec_val "$path" "node.session.auth.username_in")
[[ -n $username ]] && userpwd_str="$username:$password"
# get and set incoming username and password details
[[ $username_in == "<empty>" ]] && username_in=""
password_in=$(kdump_iscsi_get_rec_val "$path" "node.session.auth.password_in")
[[ $password_in == "<empty>" ]] && password_in=""
[[ -n $username_in ]] && userpwd_in_str=":$username_in:$password_in"
kdump_install_net "$tgt_ipaddr"
# prepare netroot= command line
# FIXME: Do we need to parse and set other parameters like protocol, port
# iscsi_iface_name, netdev_name, LUN etc.
if is_ipv6_address "$tgt_ipaddr"; then
tgt_ipaddr="[$tgt_ipaddr]"
fi
netroot_str="netroot=iscsi:${userpwd_str}${userpwd_in_str}@$tgt_ipaddr::::$tgt_name"
[[ -f $netroot_conf ]] || touch "$netroot_conf"
# If netroot target does not exist already, append.
if ! grep -q "$netroot_str" "$netroot_conf"; then
echo "$netroot_str" >> "$netroot_conf"
dinfo "Appended $netroot_str to $netroot_conf"
fi
# Setup initator
if ! initiator_str=$(kdump_get_iscsi_initiator); then
derror "Failed to get initiator name"
return 1
fi
# If initiator details do not exist already, append.
if ! grep -q "$initiator_str" "$netroot_conf"; then
echo "$initiator_str" >> "$netroot_conf"
dinfo "Appended $initiator_str to $netroot_conf"
fi
}
kdump_check_iscsi_targets() {
# If our prerequisites are not met, fail anyways.
type -P iscsistart > /dev/null || return 1
kdump_check_setup_iscsi() (
local _dev
_dev=$1
[[ -L /sys/dev/block/$_dev ]] || return
cd "$(readlink -f "/sys/dev/block/$_dev")" || return 1
until [[ -d sys || -d iscsi_session ]]; do
cd ..
done
[[ -d iscsi_session ]] && kdump_setup_iscsi_device "$PWD"
)
[[ $hostonly ]] || [[ $mount_needs ]] && {
for_each_host_dev_and_slaves_all kdump_check_setup_iscsi
}
}
# hostname -a is deprecated, do it by ourself
get_alias() {
local ips
local entries
local alias_set
ips=$(hostname -I)
for ip in $ips; do
# in /etc/hosts, alias can come at the 2nd column
if entries=$(grep "$ip" /etc/hosts | awk '{ $1=""; print $0 }'); then
alias_set="$alias_set $entries"
fi
done
echo "$alias_set"
}
is_localhost() {
local hostnames
local shortnames
local aliasname
local nodename=$1
hostnames=$(hostname -A)
shortnames=$(hostname -A -s)
aliasname=$(get_alias)
hostnames="$hostnames $shortnames $aliasname"
for name in ${hostnames}; do
if [[ $name == "$nodename" ]]; then
return 0
fi
done
return 1
}
# retrieves fence_kdump nodes from Pacemaker cluster configuration
get_pcs_fence_kdump_nodes() {
local nodes
pcs cluster sync > /dev/null 2>&1 && pcs cluster cib-upgrade > /dev/null 2>&1
# get cluster nodes from cluster cib, get interface and ip address
nodelist=$(pcs cluster cib | xmllint --xpath "/cib/status/node_state/@uname" -)
# nodelist is formed as 'uname="node1" uname="node2" ... uname="nodeX"'
# we need to convert each to node1, node2 ... nodeX in each iteration
for node in ${nodelist}; do
# convert $node from 'uname="nodeX"' to 'nodeX'
eval "$node"
nodename="$uname"
# Skip its own node name
if is_localhost "$nodename"; then
continue
fi
nodes="$nodes $nodename"
done
echo "$nodes"
}
# retrieves fence_kdump args from config file
get_pcs_fence_kdump_args() {
if [[ -f $FENCE_KDUMP_CONFIG_FILE ]]; then
. "$FENCE_KDUMP_CONFIG_FILE"
echo "$FENCE_KDUMP_OPTS"
fi
}
get_generic_fence_kdump_nodes() {
local filtered
local nodes
kdump-lib.sh: add a config value retrive helper Add a helper kdump_get_conf_val to replace get_option_value. It can help cover more corner cases in the code, like when there are multiple spaces in config file, config value separated by a tab, heading spaces, or trailing comments. And this uses "sed group command" and "sed hold buffer", make it much faster than previous `grep <config> | tail -1`. This helper is supposed to provide a universal way for kexec-tools scripts to read in config value. Currently, different scripts are reading the config in many different fragile ways. For example, following codes are found in kexec-tools script code base: 1. grep ^force_rebuild $KDUMP_CONFIG_FILE echo $_force_rebuild | cut -d' ' -f2 2. grep ^kdump_post $KDUMP_CONFIG_FILE | cut -d\ -f2 3. awk '/^sshkey/ {print $2}' $conf_file 4. grep ^path $KDUMP_CONFIG_FILE | cut -d' ' -f2- 1, 2, and 4 will fail if the space is replaced by, e.g. a tab 1 and 2 might fail if there are multiple spaces between config name and config value: "kdump_post /var/crash/scripts/kdump-post.sh" A space will be read instead of config value. 1, 2, 3 will fail if there are space in file path, like: "kdump_post /var/crash/scripts dir/kdump-post.sh" 4 will fail if there are trailing comments: "path /var/crash # some comment here" And all will fail if there are heading space, " path /var/crash" And all will most likely cause problems if the config file contains the same option more than once. And all of them are slower than the new sed call. Old get_option_value is also very slow and doesn't handle heading space. Although we never claim to support heading space or tailing comments before, it's harmless to be more robust on config reading, and many conf files in /etc support heading spaces. And have a faster and safer config reading helper makes it easier to clean up the code. Signed-off-by: Kairui Song <kasong@redhat.com> Acked-by: Philipp Rudo <prudo@redhat.com>
2021-08-16 15:25:14 +00:00
nodes=$(kdump_get_conf_val "fence_kdump_nodes")
for node in ${nodes}; do
# Skip its own node name
if is_localhost "$node"; then
continue
fi
filtered="$filtered $node"
done
echo "$filtered"
}
# setup fence_kdump in cluster
# setup proper network and install needed files
kdump_configure_fence_kdump() {
local kdump_cfg_file=$1
local nodes
local args
if is_generic_fence_kdump; then
nodes=$(get_generic_fence_kdump_nodes)
elif is_pcs_fence_kdump; then
nodes=$(get_pcs_fence_kdump_nodes)
# set appropriate options in kdump.conf
echo "fence_kdump_nodes $nodes" >> "${kdump_cfg_file}"
args=$(get_pcs_fence_kdump_args)
if [[ -n $args ]]; then
echo "fence_kdump_args $args" >> "${kdump_cfg_file}"
fi
else
# fence_kdump not configured
return 1
fi
# setup network for each node
for node in ${nodes}; do
kdump_install_net "$node"
done
dracut_install /etc/hosts
dracut_install /etc/nsswitch.conf
dracut_install "$FENCE_KDUMP_SEND"
}
# Install a random seed used to feed /dev/urandom
# By the time kdump service starts, /dev/uramdom is already fed by systemd
kdump_install_random_seed() {
local poolsize
poolsize=$(< /proc/sys/kernel/random/poolsize)
if [[ ! -d "${initdir}/var/lib/" ]]; then
mkdir -p "${initdir}/var/lib/"
fi
dd if=/dev/urandom of="${initdir}/var/lib/random-seed" \
bs="$poolsize" count=1 2> /dev/null
}
kdump_install_systemd_conf() {
# Kdump turns out to require longer default systemd mount timeout
# than 1st kernel(90s by default), we use default 300s for kdump.
if ! grep -q -r "^[[:space:]]*DefaultTimeoutStartSec=" "${initdir}/etc/systemd/system.conf"*; then
mkdir -p "${initdir}/etc/systemd/system.conf.d"
echo "[Manager]" > "${initdir}/etc/systemd/system.conf.d/kdump.conf"
echo "DefaultTimeoutStartSec=300s" >> "${initdir}/etc/systemd/system.conf.d/kdump.conf"
fi
# Forward logs to console directly, and don't read Kmsg, this avoids
# unneccessary memory consumption and make console output more useful.
# Only do so for non fadump image.
mkdir -p "${initdir}/etc/systemd/journald.conf.d"
echo "[Journal]" > "${initdir}/etc/systemd/journald.conf.d/kdump.conf"
echo "Storage=volatile" >> "${initdir}/etc/systemd/journald.conf.d/kdump.conf"
echo "ReadKMsg=no" >> "${initdir}/etc/systemd/journald.conf.d/kdump.conf"
echo "ForwardToConsole=yes" >> "${initdir}/etc/systemd/journald.conf.d/kdump.conf"
}
install() {
kdump_module_init
kdump_install_conf
remove_sysctl_conf
if is_ssh_dump_target; then
kdump_install_random_seed
fi
dracut_install -o /etc/adjtime /etc/localtime
inst "$moddir/monitor_dd_progress" "/kdumpscripts/monitor_dd_progress"
chmod +x "${initdir}/kdumpscripts/monitor_dd_progress"
inst "/bin/dd" "/bin/dd"
inst "/bin/tail" "/bin/tail"
inst "/bin/date" "/bin/date"
inst "/bin/sync" "/bin/sync"
inst "/bin/cut" "/bin/cut"
inst "/bin/head" "/bin/head"
inst "/bin/awk" "/bin/awk"
inst "/bin/sed" "/bin/sed"
inst "/bin/stat" "/bin/stat"
inst "/sbin/makedumpfile" "/sbin/makedumpfile"
inst "/sbin/vmcore-dmesg" "/sbin/vmcore-dmesg"
inst "/usr/bin/printf" "/sbin/printf"
inst "/usr/bin/logger" "/sbin/logger"
inst "/usr/bin/chmod" "/sbin/chmod"
inst "/lib/kdump/kdump-lib-initramfs.sh" "/lib/kdump-lib-initramfs.sh"
inst "/lib/kdump/kdump-logger.sh" "/lib/kdump-logger.sh"
inst "$moddir/kdump.sh" "/usr/bin/kdump.sh"
inst "$moddir/kdump-capture.service" "$systemdsystemunitdir/kdump-capture.service"
systemctl -q --root "$initdir" add-wants initrd.target kdump-capture.service
kdump-emergency: fix "Transaction is destructive" emergency failure We met a problem that the kdump emergency service failed to start when the target dump timeout(we passed "rd.timeout=30" to kdump), it reported "Transaction is destructive" messages: [ TIME ] Timed out waiting for device dev-mapper-fedora\x2droot.device. [DEPEND] Dependency failed for Initrd Root Device. [ SKIP ] Ordering cycle found, skipping System Initialization [DEPEND] Dependency failed for /sysroot. [DEPEND] Dependency failed for Initrd Root File System. [DEPEND] Dependency failed for Reload Configuration from the Real Root. [ SKIP ] Ordering cycle found, skipping System Initialization [ SKIP ] Ordering cycle found, skipping Initrd Default Target [DEPEND] Dependency failed for File System Check on /dev/mapper/fedora-root. [ OK ] Reached target Initrd File Systems. [ OK ] Stopped dracut pre-udev hook. [ OK ] Stopped dracut cmdline hook. Starting Setup Virtual Console... Starting Kdump Emergency... [ OK ] Reached target Initrd Default Target. [ OK ] Stopped dracut initqueue hook. Failed to start kdump-error-handler.service: Transaction is destructive. See system logs and 'systemctl status kdump-error-handler.service' for details. [FAILED] Failed to start Kdump Emergency. See 'systemctl status emergency.service' for details. [DEPEND] Dependency failed for Emergency Mode. This is because in case of root failure, initrd-root-fs.target will trigger systemd emergency target which requires the systemd emergency service actually is kdump-emergency.service, then our kdump-emergency.service starts kdump-error-handler.service with "systemctl isolate"(see 99kdumpbase/kdump-emergency.service, we replace systemd's with this one under kdump). This will lead to systemd two contradictable jobs queued as an atomic transaction: job 1) the emergency service gets started by initrd-root-fs.target job 2) the emergency service gets stopped due to "systemctl isolate" thereby throwing "Transaction is destructive". In order to solve it, we can utilize "IgnoreOnIsolate=yes" for both kdump-emergency.service and kdump-emergency.target. Unit with attribute "IgnoreOnIsolate=yes" won't be stopped when isolating another unit, they can keep going as expected in case be triggered by any failure. We add kdump-emergency.target dedicated to kdump the similar way as did for kdump-emergency.service(i.e. will replace systemd's emergency.target with kdump-emergency.target under kdump), and adds "IgnoreOnIsolate=yes" into both of them. Signed-off-by: Xunlei Pang <xlpang@redhat.com> Acked-by: Dave Young <dyoung@redhat.com> Acked-by: Pratyush Anand <panand@redhat.com> [bhe: improve the patch log about IgnoreOnIsolate="]
2017-03-27 04:07:32 +00:00
# Replace existing emergency service and emergency target
Introduce kdump error handling service Now upon failure kdump script might not be called at all and it might not be able to execute default action. It results in a hang. Because we disable emergency shell and rely on kdump.sh being invoked through dracut-pre-pivot hook. But it might happen that we never call into dracut-pre-pivot hook because certain systemd targets could not reach due to failure in their dependencies. In those cases error handling code does not run and system hangs. For example: sysroot-var-crash.mount --> initrd-root-fs.target --> initrd.target \ --> dracut-pre-pivot.service --> kdump.sh If /sysroot/var/crash mount fails, initrd-root-fs.target will not be reached. And then initrd.target will not be reached, dracut-pre-pivot.service wouldn't run. Finally kdump.sh wouldn't run. To solve this problem, we need to separate the error handling code from dracut-pre-pivot hook, and every time when a failure shows up, the separated code can be called by the emergency service. By default systemd provides an emergency service which will drop us into shell every time upon a critical failure. It's very convenient for us to re-use the framework of systemd emergency, because we don't have to touch the other parts of systemd. We can use our own script instead of the default one. This new scheme will overwrite emergency shell and replace with kdump error handling code. And this code will do the error handling as needed. Now, we will not rely on dracut-pre-pivot hook running always. Instead whenever error happens and it is serious enough that emergency shell needed to run, now kdump error handler will run. dracut-emergency is also replaced by kdump error handler and it's enabled again all the way down. So all the failure (including systemd and dracut) in 2nd kernel could be captured, and trigger kdump error handler. dracut-initqueue is a special case, which calls "systemctl start emergency" directly, not via "OnFailure=emergency". In case of failure, emergency is started, but not in a isolation mode, which means dracut-initqueue is still running. On the other hand, emergency will call dracut-initqueue again when default action is dump_to_rootfs. systemd would block on the last dracut-initqueue, waiting for the first instance to exit, which leaves us hang. It looks like the following: dracut-initqueue (running) --> call dracut-emergency: --> dracut-emergency (running) --> kdump-error-handler.sh (running) --> call dracut-initqueue: --> blocking and waiting for the original instance to exit. To fix this, I'd like to introduce a wrapper emergency service. This emegency service will replace both the systemd and dracut emergency. And this service does nothing but to isolate to real kdump error handler service: dracut-initqueue (running) --> call dracut-emergency: --> dracut-emergency isolate to kdump-error-handler.service --> dracut-emergency and dracut-initqueue will both be stopped and kdump-error-handler.service will run kdump-error-handler.sh. In a normal failure case, this still works: foo.service fails --> trigger emergency.service --> emergency.service isolates to kdump-error-handler.service --> kdump-error-handler.service will run kdump-error-handler.sh Signed-off-by: WANG Chao <chaowang@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Dave Young <dyoung@redhat.com>
2014-05-08 11:37:15 +00:00
cp "$moddir/kdump-emergency.service" "$initdir/$systemdsystemunitdir/emergency.service"
kdump-emergency: fix "Transaction is destructive" emergency failure We met a problem that the kdump emergency service failed to start when the target dump timeout(we passed "rd.timeout=30" to kdump), it reported "Transaction is destructive" messages: [ TIME ] Timed out waiting for device dev-mapper-fedora\x2droot.device. [DEPEND] Dependency failed for Initrd Root Device. [ SKIP ] Ordering cycle found, skipping System Initialization [DEPEND] Dependency failed for /sysroot. [DEPEND] Dependency failed for Initrd Root File System. [DEPEND] Dependency failed for Reload Configuration from the Real Root. [ SKIP ] Ordering cycle found, skipping System Initialization [ SKIP ] Ordering cycle found, skipping Initrd Default Target [DEPEND] Dependency failed for File System Check on /dev/mapper/fedora-root. [ OK ] Reached target Initrd File Systems. [ OK ] Stopped dracut pre-udev hook. [ OK ] Stopped dracut cmdline hook. Starting Setup Virtual Console... Starting Kdump Emergency... [ OK ] Reached target Initrd Default Target. [ OK ] Stopped dracut initqueue hook. Failed to start kdump-error-handler.service: Transaction is destructive. See system logs and 'systemctl status kdump-error-handler.service' for details. [FAILED] Failed to start Kdump Emergency. See 'systemctl status emergency.service' for details. [DEPEND] Dependency failed for Emergency Mode. This is because in case of root failure, initrd-root-fs.target will trigger systemd emergency target which requires the systemd emergency service actually is kdump-emergency.service, then our kdump-emergency.service starts kdump-error-handler.service with "systemctl isolate"(see 99kdumpbase/kdump-emergency.service, we replace systemd's with this one under kdump). This will lead to systemd two contradictable jobs queued as an atomic transaction: job 1) the emergency service gets started by initrd-root-fs.target job 2) the emergency service gets stopped due to "systemctl isolate" thereby throwing "Transaction is destructive". In order to solve it, we can utilize "IgnoreOnIsolate=yes" for both kdump-emergency.service and kdump-emergency.target. Unit with attribute "IgnoreOnIsolate=yes" won't be stopped when isolating another unit, they can keep going as expected in case be triggered by any failure. We add kdump-emergency.target dedicated to kdump the similar way as did for kdump-emergency.service(i.e. will replace systemd's emergency.target with kdump-emergency.target under kdump), and adds "IgnoreOnIsolate=yes" into both of them. Signed-off-by: Xunlei Pang <xlpang@redhat.com> Acked-by: Dave Young <dyoung@redhat.com> Acked-by: Pratyush Anand <panand@redhat.com> [bhe: improve the patch log about IgnoreOnIsolate="]
2017-03-27 04:07:32 +00:00
cp "$moddir/kdump-emergency.target" "$initdir/$systemdsystemunitdir/emergency.target"
Introduce kdump error handling service Now upon failure kdump script might not be called at all and it might not be able to execute default action. It results in a hang. Because we disable emergency shell and rely on kdump.sh being invoked through dracut-pre-pivot hook. But it might happen that we never call into dracut-pre-pivot hook because certain systemd targets could not reach due to failure in their dependencies. In those cases error handling code does not run and system hangs. For example: sysroot-var-crash.mount --> initrd-root-fs.target --> initrd.target \ --> dracut-pre-pivot.service --> kdump.sh If /sysroot/var/crash mount fails, initrd-root-fs.target will not be reached. And then initrd.target will not be reached, dracut-pre-pivot.service wouldn't run. Finally kdump.sh wouldn't run. To solve this problem, we need to separate the error handling code from dracut-pre-pivot hook, and every time when a failure shows up, the separated code can be called by the emergency service. By default systemd provides an emergency service which will drop us into shell every time upon a critical failure. It's very convenient for us to re-use the framework of systemd emergency, because we don't have to touch the other parts of systemd. We can use our own script instead of the default one. This new scheme will overwrite emergency shell and replace with kdump error handling code. And this code will do the error handling as needed. Now, we will not rely on dracut-pre-pivot hook running always. Instead whenever error happens and it is serious enough that emergency shell needed to run, now kdump error handler will run. dracut-emergency is also replaced by kdump error handler and it's enabled again all the way down. So all the failure (including systemd and dracut) in 2nd kernel could be captured, and trigger kdump error handler. dracut-initqueue is a special case, which calls "systemctl start emergency" directly, not via "OnFailure=emergency". In case of failure, emergency is started, but not in a isolation mode, which means dracut-initqueue is still running. On the other hand, emergency will call dracut-initqueue again when default action is dump_to_rootfs. systemd would block on the last dracut-initqueue, waiting for the first instance to exit, which leaves us hang. It looks like the following: dracut-initqueue (running) --> call dracut-emergency: --> dracut-emergency (running) --> kdump-error-handler.sh (running) --> call dracut-initqueue: --> blocking and waiting for the original instance to exit. To fix this, I'd like to introduce a wrapper emergency service. This emegency service will replace both the systemd and dracut emergency. And this service does nothing but to isolate to real kdump error handler service: dracut-initqueue (running) --> call dracut-emergency: --> dracut-emergency isolate to kdump-error-handler.service --> dracut-emergency and dracut-initqueue will both be stopped and kdump-error-handler.service will run kdump-error-handler.sh. In a normal failure case, this still works: foo.service fails --> trigger emergency.service --> emergency.service isolates to kdump-error-handler.service --> kdump-error-handler.service will run kdump-error-handler.sh Signed-off-by: WANG Chao <chaowang@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Dave Young <dyoung@redhat.com>
2014-05-08 11:37:15 +00:00
# Also redirect dracut-emergency to kdump error handler
ln_r "$systemdsystemunitdir/emergency.service" "$systemdsystemunitdir/dracut-emergency.service"
# Check for all the devices and if any device is iscsi, bring up iscsi
# target. Ideally all this should be pushed into dracut iscsi module
# at some point of time.
kdump_check_iscsi_targets
kdump_install_systemd_conf
# nfs/ssh dump will need to get host ip in second kernel and need to call 'ip' tool, see get_host_ip for more detail
if is_nfs_dump_target || is_ssh_dump_target; then
inst "ip"
fi
# For the lvm type target under kdump, in /etc/lvm/lvm.conf we can
# safely replace "reserved_memory=XXXX"(default value is 8192) with
# "reserved_memory=1024" to lower memory pressure under kdump. We do
# it unconditionally here, if "/etc/lvm/lvm.conf" doesn't exist, it
# actually does nothing.
sed -i -e \
's/\(^[[:space:]]*reserved_memory[[:space:]]*=\)[[:space:]]*[[:digit:]]*/\1 1024/' \
"${initdir}/etc/lvm/lvm.conf" &> /dev/null
# Save more memory by dropping switch root capability
dracut_no_switch_root
}