From 0ab5b9df0c9f07ae747ddc678d4e423c42f69624 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 10 Jun 2019 09:42:06 +0100 Subject: [PATCH 1/8] i2c: i2c-qcom-geni: Provide support for ACPI Add a match table to allow automatic probing of ACPI device QCOM0220. Ignore clock attainment errors. Set default clock frequency value. Signed-off-by: Lee Jones Acked-by: Ard Biesheuvel --- drivers/i2c/busses/i2c-qcom-geni.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c index db075bc0d952..9e3b8a98688d 100644 --- a/drivers/i2c/busses/i2c-qcom-geni.c +++ b/drivers/i2c/busses/i2c-qcom-geni.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 // Copyright (c) 2017-2018, The Linux Foundation. All rights reserved. +#include #include #include #include @@ -483,6 +484,14 @@ static const struct i2c_algorithm geni_i2c_algo = { .functionality = geni_i2c_func, }; +#ifdef CONFIG_ACPI +static const struct acpi_device_id geni_i2c_acpi_match[] = { + { "QCOM0220"}, + { }, +}; +MODULE_DEVICE_TABLE(acpi, geni_i2c_acpi_match); +#endif + static int geni_i2c_probe(struct platform_device *pdev) { struct geni_i2c_dev *gi2c; @@ -502,7 +511,7 @@ static int geni_i2c_probe(struct platform_device *pdev) return PTR_ERR(gi2c->se.base); gi2c->se.clk = devm_clk_get(&pdev->dev, "se"); - if (IS_ERR(gi2c->se.clk)) { + if (IS_ERR(gi2c->se.clk) && !has_acpi_companion(&pdev->dev)) { ret = PTR_ERR(gi2c->se.clk); dev_err(&pdev->dev, "Err getting SE Core clk %d\n", ret); return ret; @@ -516,6 +525,9 @@ static int geni_i2c_probe(struct platform_device *pdev) gi2c->clk_freq_out = KHZ(100); } + if (has_acpi_companion(&pdev->dev)) + ACPI_COMPANION_SET(&gi2c->adap.dev, ACPI_COMPANION(&pdev->dev)); + gi2c->irq = platform_get_irq(pdev, 0); if (gi2c->irq < 0) { dev_err(&pdev->dev, "IRQ error for i2c-geni\n"); @@ -660,6 +672,7 @@ static struct platform_driver geni_i2c_driver = { .name = "geni_i2c", .pm = &geni_i2c_pm_ops, .of_match_table = geni_i2c_dt_match, + .acpi_match_table = ACPI_PTR(geni_i2c_acpi_match), }, }; -- 2.21.0 From 5a0639fed6e05977d85c4824354e73d0a2fa92ef Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 10 Jun 2019 09:42:07 +0100 Subject: [PATCH 2/8] i2c: i2c-qcom-geni: Signify successful driver probe The Qualcomm Geni I2C driver currently probes silently which can be confusing when debugging potential issues. Add a low level (INFO) print when each I2C controller is successfully initially set-up. Signed-off-by: Lee Jones Acked-by: Ard Biesheuvel --- drivers/i2c/busses/i2c-qcom-geni.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c index 9e3b8a98688d..a89bfce5388e 100644 --- a/drivers/i2c/busses/i2c-qcom-geni.c +++ b/drivers/i2c/busses/i2c-qcom-geni.c @@ -596,6 +596,8 @@ static int geni_i2c_probe(struct platform_device *pdev) return ret; } + dev_dbg(&pdev->dev, "Geni-I2C adaptor successfully added\n"); + return 0; } -- 2.21.0 From 6f202eb6dbccf3172616a620faf934bf6195a0f9 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 10 Jun 2019 09:42:08 +0100 Subject: [PATCH 3/8] pinctrl: msm: Add ability for drivers to supply a reserved GPIO list When booting MSM based platforms with Device Tree or some ACPI implementations, it is possible to provide a list of reserved pins via the 'gpio-reserved-ranges' and 'gpios' properties respectively. However some ACPI tables are not populated with this information, thus it has to come from a knowledgable device driver instead. Here we provide the MSM common driver with additional support to parse this informtion and correctly populate the widely used 'valid_mask'. Signed-off-by: Lee Jones Reviewed-by: Bjorn Andersson --- drivers/pinctrl/qcom/pinctrl-msm.c | 18 ++++++++++++++++++ drivers/pinctrl/qcom/pinctrl-msm.h | 1 + 2 files changed, 19 insertions(+) diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c index 6e319bcc2326..80682b017a47 100644 --- a/drivers/pinctrl/qcom/pinctrl-msm.c +++ b/drivers/pinctrl/qcom/pinctrl-msm.c @@ -599,8 +599,23 @@ static int msm_gpio_init_valid_mask(struct gpio_chip *chip) int ret; unsigned int len, i; unsigned int max_gpios = pctrl->soc->ngpios; + const int *reserved = pctrl->soc->reserved_gpios; u16 *tmp; + /* Driver provided reserved list overrides DT and ACPI */ + if (reserved) { + bitmap_fill(chip->valid_mask, max_gpios); + for (i = 0; reserved[i] >= 0; i++) { + if (i >= max_gpios || reserved[i] >= max_gpios) { + dev_err(pctrl->dev, "invalid list of reserved GPIOs\n"); + return -EINVAL; + } + clear_bit(reserved[i], chip->valid_mask); + } + + return 0; + } + /* The number of GPIOs in the ACPI tables */ len = ret = device_property_read_u16_array(pctrl->dev, "gpios", NULL, 0); @@ -956,6 +971,9 @@ static void msm_gpio_irq_handler(struct irq_desc *desc) static bool msm_gpio_needs_valid_mask(struct msm_pinctrl *pctrl) { + if (pctrl->soc->reserved_gpios) + return true; + return device_property_read_u16_array(pctrl->dev, "gpios", NULL, 0) > 0; } diff --git a/drivers/pinctrl/qcom/pinctrl-msm.h b/drivers/pinctrl/qcom/pinctrl-msm.h index b724581c605c..48569cda8471 100644 --- a/drivers/pinctrl/qcom/pinctrl-msm.h +++ b/drivers/pinctrl/qcom/pinctrl-msm.h @@ -113,6 +113,7 @@ struct msm_pinctrl_soc_data { bool pull_no_keeper; const char *const *tiles; unsigned int ntiles; + const int *reserved_gpios; }; extern const struct dev_pm_ops msm_pinctrl_dev_pm_ops; -- 2.21.0 From 568ff4c9723d761164416fdf876232f5b14cf3ad Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 10 Jun 2019 09:42:09 +0100 Subject: [PATCH 4/8] pinctrl: qcom: sdm845: Provide ACPI support This patch provides basic support for booting with ACPI instead of the currently supported Device Tree. When doing so there are a couple of differences which we need to taken into consideration. Firstly, the SDM850 ACPI tables omit information pertaining to the 4 reserved GPIOs on the platform. If Linux attempts to touch/ initialise any of these lines, the firmware will restart the platform. Secondly, when booting with ACPI, it is expected that the firmware will set-up things like; Regulators, Clocks, Pin Functions, etc in their ideal configuration. Thus, the possible Pin Functions available to this platform are not advertised when providing the higher GPIOD/Pinctrl APIs with pin information. Signed-off-by: Lee Jones Acked-by: Ard Biesheuvel --- drivers/pinctrl/qcom/Kconfig | 2 +- drivers/pinctrl/qcom/pinctrl-sdm845.c | 36 ++++++++++++++++++++++++++- 2 files changed, 36 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig index 890d0a3a790b..27ab585a639c 100644 --- a/drivers/pinctrl/qcom/Kconfig +++ b/drivers/pinctrl/qcom/Kconfig @@ -169,7 +169,7 @@ config PINCTRL_SDM660 config PINCTRL_SDM845 tristate "Qualcomm Technologies Inc SDM845 pin controller driver" - depends on GPIOLIB && OF + depends on GPIOLIB && (OF || ACPI) select PINCTRL_MSM help This is the pinctrl, pinmux, pinconf and gpiolib driver for the diff --git a/drivers/pinctrl/qcom/pinctrl-sdm845.c b/drivers/pinctrl/qcom/pinctrl-sdm845.c index c97f20fca5fd..98a438dba711 100644 --- a/drivers/pinctrl/qcom/pinctrl-sdm845.c +++ b/drivers/pinctrl/qcom/pinctrl-sdm845.c @@ -3,6 +3,7 @@ * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved. */ +#include #include #include #include @@ -1277,6 +1278,10 @@ static const struct msm_pingroup sdm845_groups[] = { UFS_RESET(ufs_reset, 0x99f000), }; +static const int sdm845_acpi_reserved_gpios[] = { + 0, 1, 2, 3, 81, 82, 83, 84, -1 +}; + static const struct msm_pinctrl_soc_data sdm845_pinctrl = { .pins = sdm845_pins, .npins = ARRAY_SIZE(sdm845_pins), @@ -1287,11 +1292,39 @@ static const struct msm_pinctrl_soc_data sdm845_pinctrl = { .ngpios = 150, }; +static const struct msm_pinctrl_soc_data sdm845_acpi_pinctrl = { + .pins = sdm845_pins, + .npins = ARRAY_SIZE(sdm845_pins), + .groups = sdm845_groups, + .ngroups = ARRAY_SIZE(sdm845_groups), + .reserved_gpios = sdm845_acpi_reserved_gpios, + .ngpios = 150, +}; + static int sdm845_pinctrl_probe(struct platform_device *pdev) { - return msm_pinctrl_probe(pdev, &sdm845_pinctrl); + int ret; + + if (pdev->dev.of_node) { + ret = msm_pinctrl_probe(pdev, &sdm845_pinctrl); + } else if (has_acpi_companion(&pdev->dev)) { + ret = msm_pinctrl_probe(pdev, &sdm845_acpi_pinctrl); + } else { + dev_err(&pdev->dev, "DT and ACPI disabled\n"); + return -EINVAL; + } + + return ret; } +#ifdef CONFIG_ACPI +static const struct acpi_device_id sdm845_pinctrl_acpi_match[] = { + { "QCOM0217"}, + { }, +}; +MODULE_DEVICE_TABLE(acpi, sdm845_pinctrl_acpi_match); +#endif + static const struct of_device_id sdm845_pinctrl_of_match[] = { { .compatible = "qcom,sdm845-pinctrl", }, { }, @@ -1302,6 +1335,7 @@ static struct platform_driver sdm845_pinctrl_driver = { .name = "sdm845-pinctrl", .pm = &msm_pinctrl_dev_pm_ops, .of_match_table = sdm845_pinctrl_of_match, + .acpi_match_table = ACPI_PTR(sdm845_pinctrl_acpi_match), }, .probe = sdm845_pinctrl_probe, .remove = msm_pinctrl_remove, -- 2.21.0