# We have to override the new %%install behavior because, well... the kernel is special. %global __spec_install_pre %{___build_pre} Summary: The Linux kernel # For a stable, released kernel, released_kernel should be 1. For rawhide # and/or a kernel built from an rc or git snapshot, released_kernel should # be 0. %global released_kernel 0 # Sign modules on x86. Make sure the config files match this setting if more # architectures are added. %ifarch %{ix86} x86_64 %global signkernel 1 %global signmodules 1 %global zipmodules 1 %else %global signkernel 0 %global signmodules 1 %global zipmodules 1 %endif %if %{zipmodules} %global zipsed -e 's/\.ko$/\.ko.xz/' %endif # define buildid .local # baserelease defines which build revision of this kernel version we're # building. We used to call this fedora_build, but the magical name # baserelease is matched by the rpmdev-bumpspec tool, which you should use. # # We used to have some extra magic weirdness to bump this automatically, # but now we don't. Just use: rpmdev-bumpspec -c 'comment for changelog' # When changing base_sublevel below or going from rc to a final kernel, # reset this by hand to 1 (or to 0 and then use rpmdev-bumpspec). # scripts/rebase.sh should be made to do that for you, actually. # # NOTE: baserelease must be > 0 or bad things will happen if you switch # to a released kernel (released version will be < rc version) # # For non-released -rc kernels, this will be appended after the rcX and # gitX tags, so a 3 here would become part of release "0.rcX.gitX.3" # %global baserelease 1 %global fedora_build %{baserelease} # base_sublevel is the kernel version we're starting with and patching # on top of -- for example, 3.1-rc7-git1 starts with a 3.0 base, # which yields a base_sublevel of 0. %define base_sublevel 18 ## If this is a released kernel ## %if 0%{?released_kernel} # Do we have a -stable update to apply? %define stable_update 0 # Set rpm version accordingly %if 0%{?stable_update} %define stablerev %{stable_update} %define stable_base %{stable_update} %endif %define rpmversion 4.%{base_sublevel}.%{stable_update} ## The not-released-kernel case ## %else # The next upstream release sublevel (base_sublevel+1) %define upstream_sublevel %(echo $((%{base_sublevel} + 1))) # The rc snapshot level %global rcrev 6 # The git snapshot level %define gitrev 4 # Set rpm version accordingly %define rpmversion 4.%{upstream_sublevel}.0 %endif # Nb: The above rcrev and gitrev values automagically define Patch00 and Patch01 below. # What parts do we want to build? We must build at least one kernel. # These are the kernels that are built IF the architecture allows it. # All should default to 1 (enabled) and be flipped to 0 (disabled) # by later arch-specific checks. # The following build options are enabled by default. # Use either --without in your rpmbuild command or force values # to 0 in here to disable them. # # standard kernel %define with_up %{?_without_up: 0} %{?!_without_up: 1} # kernel PAE (only valid for i686 (PAE) and ARM (lpae)) %define with_pae %{?_without_pae: 0} %{?!_without_pae: 1} # kernel-debug %define with_debug %{?_without_debug: 0} %{?!_without_debug: 1} # kernel-headers %define with_headers %{?_without_headers: 0} %{?!_without_headers: 1} %define with_cross_headers %{?_without_cross_headers: 0} %{?!_without_cross_headers: 1} # kernel-debuginfo %define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1} # Want to build a the vsdo directories installed %define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1} # # Additional options for user-friendly one-off kernel building: # # Only build the base kernel (--with baseonly): %define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0} # Only build the pae kernel (--with paeonly): %define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0} # Only build the debug kernel (--with dbgonly): %define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0} # # should we do C=1 builds with sparse %define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0} # # Cross compile requested? %define with_cross %{?_with_cross: 1} %{?!_with_cross: 0} # # build a release kernel on rawhide %define with_release %{?_with_release: 1} %{?!_with_release: 0} # verbose build, i.e. no silent rules and V=1 %define with_verbose %{?_with_verbose: 1} %{?!_with_verbose: 0} # Set debugbuildsenabled to 1 for production (build separate debug kernels) # and 0 for rawhide (all kernels are debug kernels). # See also 'make debug' and 'make release'. %define debugbuildsenabled 0 # Kernel headers are being split out into a separate package %define with_headers 0 %define with_cross_headers 0 %if %{with_verbose} %define make_opts V=1 %else %define make_opts -s %endif # Want to build a vanilla kernel build without any non-upstream patches? %define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0} # pkg_release is what we'll fill in for the rpm Release: field %if 0%{?released_kernel} %define pkg_release %{fedora_build}%{?buildid}%{?dist} %else # non-released_kernel %if 0%{?rcrev} %define rctag .rc%rcrev %else %define rctag .rc0 %endif %if 0%{?gitrev} %define gittag .git%gitrev %else %define gittag .git0 %endif %define pkg_release 0%{?rctag}%{?gittag}.%{fedora_build}%{?buildid}%{?dist} %endif # The kernel tarball/base version %define kversion 4.%{base_sublevel} %define make_target bzImage %define image_install_path boot %define KVERREL %{version}-%{release}.%{_target_cpu} %define hdrarch %_target_cpu %define asmarch %_target_cpu %if 0%{!?nopatches:1} %define nopatches 0 %endif %if %{with_vanilla} %define nopatches 1 %endif %if %{nopatches} %define variant -vanilla %endif %if !%{debugbuildsenabled} %define with_debug 0 %endif %if !%{with_debuginfo} %define _enable_debug_packages 0 %endif %define debuginfodir /usr/lib/debug # Needed because we override almost everything involving build-ids # and debuginfo generation. Currently we rely on the old alldebug setting. %global _build_id_links alldebug # kernel PAE is only built on ARMv7 in rawhide. # Fedora 27 and earlier still support PAE, so change this on rebases. # %ifnarch i686 armv7hl %ifnarch armv7hl %define with_pae 0 %endif # if requested, only build base kernel %if %{with_baseonly} %define with_pae 0 %define with_debug 0 %endif # if requested, only build pae kernel %if %{with_paeonly} %define with_up 0 %define with_debug 0 %endif # if requested, only build debug kernel %if %{with_dbgonly} %if %{debugbuildsenabled} %define with_up 0 %define with_pae 0 %endif %define with_pae 0 %endif %define all_x86 i386 i686 %if %{with_vdso_install} %define use_vdso 1 %endif # Overrides for generic default options # don't do debug builds on anything but i686 and x86_64 %ifnarch i686 x86_64 %define with_debug 0 %endif # don't build noarch kernels or headers (duh) %ifarch noarch %define with_up 0 %define with_headers 0 %define with_cross_headers 0 %define all_arch_configs kernel-%{version}-*.config %endif # sparse blows up on ppc %ifnarch %{power64} %define with_sparse 0 %endif # Per-arch tweaks %ifarch %{all_x86} %define asmarch x86 %define hdrarch i386 %define pae PAE %define all_arch_configs kernel-%{version}-i?86*.config %define kernel_image arch/x86/boot/bzImage %endif %ifarch x86_64 %define asmarch x86 %define all_arch_configs kernel-%{version}-x86_64*.config %define kernel_image arch/x86/boot/bzImage %endif %ifarch %{power64} %define asmarch powerpc %define hdrarch powerpc %define make_target vmlinux %define kernel_image vmlinux %define kernel_image_elf 1 %ifarch ppc64le %define all_arch_configs kernel-%{version}-ppc64le*.config %endif %endif %ifarch s390x %define asmarch s390 %define hdrarch s390 %define all_arch_configs kernel-%{version}-s390x.config %define kernel_image arch/s390/boot/bzImage %endif %ifarch %{arm} %define all_arch_configs kernel-%{version}-arm*.config %define skip_nonpae_vdso 1 %define asmarch arm %define hdrarch arm %define pae lpae %define make_target bzImage %define kernel_image arch/arm/boot/zImage # http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html %define kernel_mflags KALLSYMS_EXTRA_PASS=1 # we only build headers/perf/tools on the base arm arches # just like we used to only build them on i386 for x86 %ifnarch armv7hl %define with_headers 0 %define with_cross_headers 0 %endif %endif %ifarch aarch64 %define all_arch_configs kernel-%{version}-aarch64*.config %define asmarch arm64 %define hdrarch arm64 %define make_target Image.gz %define kernel_image arch/arm64/boot/Image.gz %endif # Should make listnewconfig fail if there's config options # printed out? %if %{nopatches} %define listnewconfig_fail 0 %define configmismatch_fail 0 %else %define listnewconfig_fail 1 %define configmismatch_fail 1 %endif # To temporarily exclude an architecture from being built, add it to # %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we # don't build kernel-headers then the new build system will no longer let # us use the previous build of that package -- it'll just be completely AWOL. # Which is a BadThing(tm). # We only build kernel-headers on the following... %define nobuildarches i386 %ifarch %nobuildarches %define with_up 0 %define with_pae 0 %define with_debuginfo 0 %define with_debug 0 %define _enable_debug_packages 0 %endif %define with_pae_debug 0 %if %{with_pae} %define with_pae_debug %{with_debug} %endif # Architectures we build tools/cpupower on %define cpupowerarchs %{ix86} x86_64 %{power64} %{arm} aarch64 %if %{use_vdso} %if 0%{?skip_nonpae_vdso} %define _use_vdso 0 %else %define _use_vdso 1 %endif %else %define _use_vdso 0 %endif # # Packages that need to be installed before the kernel is, because the %%post # scripts use them. # %define kernel_prereq coreutils, systemd >= 203-2, /usr/bin/kernel-install %define initrd_prereq dracut >= 027 Name: kernel%{?variant} License: GPLv2 and Redistributable, no modification permitted URL: https://www.kernel.org/ Version: %{rpmversion} Release: %{pkg_release} # DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD. # SET %%nobuildarches (ABOVE) INSTEAD ExclusiveArch: %{all_x86} x86_64 s390x %{arm} aarch64 ppc64le ExclusiveOS: Linux %ifnarch %{nobuildarches} Requires: kernel-core-uname-r = %{KVERREL}%{?variant} Requires: kernel-modules-uname-r = %{KVERREL}%{?variant} %endif # # List the packages used during the kernel build # BuildRequires: kmod, patch, bash, tar, git-core BuildRequires: bzip2, xz, findutils, gzip, m4, perl-interpreter, perl-Carp, perl-devel, perl-generators, make, diffutils, gawk BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc, bison, flex BuildRequires: net-tools, hostname, bc, elfutils-devel, gcc-plugin-devel # Used to mangle unversioned shebangs to be Python 3 BuildRequires: /usr/bin/pathfix.py %if %{with_sparse} BuildRequires: sparse %endif BuildConflicts: rhbuildsys(DiskFree) < 500Mb %if %{with_debuginfo} BuildRequires: rpm-build, elfutils BuildConflicts: rpm < 4.13.0.1-19 # Most of these should be enabled after more investigation %undefine _include_minidebuginfo %undefine _find_debuginfo_dwz_opts %undefine _unique_build_ids %undefine _unique_debug_names %undefine _unique_debug_srcs %undefine _debugsource_packages %undefine _debuginfo_subpackages %undefine _include_gdb_index %global _find_debuginfo_opts -r %global _missing_build_ids_terminate_build 1 %global _no_recompute_build_ids 1 %endif %if %{signkernel}%{signmodules} BuildRequires: openssl openssl-devel %if %{signkernel} BuildRequires: pesign >= 0.10-4 %endif %endif %if %{with_cross} BuildRequires: binutils-%{_build_arch}-linux-gnu, gcc-%{_build_arch}-linux-gnu %define cross_opts CROSS_COMPILE=%{_build_arch}-linux-gnu- %endif Source0: https://www.kernel.org/pub/linux/kernel/v4.x/linux-%{kversion}.tar.xz Source11: x509.genkey Source12: remove-binary-diff.pl Source15: merge.pl Source16: mod-extra.list Source17: mod-extra.sh Source18: mod-sign.sh Source90: filter-x86_64.sh Source91: filter-armv7hl.sh Source92: filter-i686.sh Source93: filter-aarch64.sh Source94: filter-ppc64le.sh Source95: filter-s390x.sh Source99: filter-modules.sh %define modsign_cmd %{SOURCE18} Source20: kernel-aarch64.config Source21: kernel-aarch64-debug.config Source22: kernel-armv7hl.config Source23: kernel-armv7hl-debug.config Source24: kernel-armv7hl-lpae.config Source25: kernel-armv7hl-lpae-debug.config Source26: kernel-i686.config Source27: kernel-i686-debug.config Source30: kernel-ppc64le.config Source31: kernel-ppc64le-debug.config Source32: kernel-s390x.config Source33: kernel-s390x-debug.config Source34: kernel-x86_64.config Source35: kernel-x86_64-debug.config Source40: generate_all_configs.sh Source41: generate_debug_configs.sh Source42: process_configs.sh Source43: generate_bls_conf.sh # This file is intentionally left empty in the stock kernel. Its a nicety # added for those wanting to do custom rebuilds with altered config opts. Source1000: kernel-local # Sources for kernel-tools Source2000: cpupower.service Source2001: cpupower.config # Here should be only the patches up to the upstream canonical Linus tree. # For a stable release kernel %if 0%{?stable_update} %if 0%{?stable_base} %define stable_patch_00 patch-4.%{base_sublevel}.%{stable_base}.xz Source5000: %{stable_patch_00} %endif # non-released_kernel case # These are automagically defined by the rcrev and gitrev values set up # near the top of this spec file. %else %if 0%{?rcrev} Source5000: patch-4.%{upstream_sublevel}-rc%{rcrev}.xz %if 0%{?gitrev} Source5001: patch-4.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev}.xz %endif %else # pre-{base_sublevel+1}-rc1 case %if 0%{?gitrev} Source5000: patch-4.%{base_sublevel}-git%{gitrev}.xz %endif %endif %endif ## Patches needed for building this package ## compile fixes # ongoing complaint, full discussion delayed until ksummit/plumbers Patch002: 0001-iio-Use-event-header-from-kernel-tree.patch %if !%{nopatches} # Git trees. # Standalone patches # 100 - Generic long running patches Patch110: lib-cpumask-Make-CPUMASK_OFFSTACK-usable-without-deb.patch Patch111: input-kill-stupid-messages.patch Patch112: die-floppy-die.patch Patch113: no-pcspkr-modalias.patch Patch114: silence-fbcon-logo.patch Patch115: Kbuild-Add-an-option-to-enable-GCC-VTA.patch Patch116: crash-driver.patch Patch117: lis3-improve-handling-of-null-rate.patch Patch118: scsi-sd_revalidate_disk-prevent-NULL-ptr-deref.patch Patch119: namespaces-no-expert.patch Patch120: ath9k-rx-dma-stop-check.patch Patch121: xen-pciback-Don-t-disable-PCI_COMMAND-on-PCI-device-.patch Patch122: Input-synaptics-pin-3-touches-when-the-firmware-repo.patch # This no longer applies, let's see if it needs to be updated # Patch123: firmware-Drop-WARN-from-usermodehelper_read_trylock-.patch # 200 - x86 / secureboot Patch201: efi-lockdown.patch Patch202: KEYS-Allow-unrestricted-boot-time-addition-of-keys-t.patch Patch203: Add-EFI-signature-data-types.patch Patch204: Add-an-EFI-signature-blob-parser-and-key-loader.patch Patch205: MODSIGN-Import-certificates-from-UEFI-Secure-Boot.patch Patch206: MODSIGN-Support-not-importing-certs-from-db.patch # bz 1497559 - Make kernel MODSIGN code not error on missing variables Patch207: 0001-Make-get_cert_list-not-complain-about-cert-lists-tha.patch Patch208: 0002-Add-efi_status_to_str-and-rework-efi_status_to_err.patch Patch209: 0003-Make-get_cert_list-use-efi_status_to_str-to-print-er.patch Patch210: disable-i8042-check-on-apple-mac.patch Patch211: drm-i915-hush-check-crtc-state.patch Patch212: efi-secureboot.patch # Fix printing of "EFI stub: UEFI Secure Boot is enabled.", # queued upstream in efi.git/next Patch213: efi-x86-call-parse-options-from-efi-main.patch # 300 - ARM patches Patch300: arm64-Add-option-of-13-for-FORCE_MAX_ZONEORDER.patch # http://www.spinics.net/lists/linux-tegra/msg26029.html Patch301: usb-phy-tegra-Add-38.4MHz-clock-table-entry.patch # http://patchwork.ozlabs.org/patch/587554/ Patch302: ARM-tegra-usb-no-reset.patch # https://patchwork.kernel.org/patch/10351797/ Patch303: ACPI-scan-Fix-regression-related-to-X-Gene-UARTs.patch # rhbz 1574718 Patch304: ACPI-irq-Workaround-firmware-issue-on-X-Gene-based-m400.patch # https://patchwork.kernel.org/patch/9820417/ Patch305: qcom-msm89xx-fixes.patch # https://patchwork.kernel.org/project/linux-mmc/list/?submitter=71861 Patch306: arm-sdhci-esdhc-imx-fixes.patch # https://www.spinics.net/lists/arm-kernel/msg670137.html Patch307: arm64-ZynqMP-firmware-clock-drivers-core.patch Patch308: arm64-96boards-Rock960-CE-board-support.patch Patch309: arm64-rockchip-add-initial-Rockpro64.patch Patch310: gpio-pxa-handle-corner-case-of-unprobed-device.patch Patch330: bcm2835-cpufreq-add-CPU-frequency-control-driver.patch # Patches enabling device specific brcm firmware nvram Patch340: 0001-brcmfmac-Remove-firmware-loading-code-duplication.patch Patch341: 0002-brcmfmac-Remove-recursion-from-firmware-load-error-h.patch Patch342: 0003-brcmfmac-Add-support-for-first-trying-to-get-a-board.patch Patch343: 0004-brcmfmac-Set-board_type-used-for-nvram-file-selectio.patch # Fix for AllWinner A64 Timer Errata, still not final # https://patchwork.kernel.org/patch/10392891/ Patch350: arm64-arch_timer-Workaround-for-Allwinner-A64-timer-instability.patch Patch351: arm64-dts-allwinner-a64-Enable-A64-timer-workaround.patch # 400 - IBM (ppc/s390x) patches # 500 - Temp fixes/CVEs etc # rhbz 1476467 Patch501: Fix-for-module-sig-verification.patch # rhbz 1431375 Patch502: input-rmi4-remove-the-need-for-artifical-IRQ.patch # END OF PATCH DEFINITIONS %endif %description The kernel meta package # # This macro does requires, provides, conflicts, obsoletes for a kernel package. # %%kernel_reqprovconf # It uses any kernel__conflicts and kernel__obsoletes # macros defined above. # %define kernel_reqprovconf \ Provides: kernel = %{rpmversion}-%{pkg_release}\ Provides: kernel-%{_target_cpu} = %{rpmversion}-%{pkg_release}%{?1:+%{1}}\ Provides: kernel-drm-nouveau = 16\ Provides: kernel-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ Requires(pre): %{kernel_prereq}\ Requires(pre): %{initrd_prereq}\ Requires(pre): linux-firmware >= 20150904-56.git6ebf5d57\ Requires(preun): systemd >= 200\ Conflicts: xfsprogs < 4.3.0-1\ Conflicts: xorg-x11-drv-vmmouse < 13.0.99\ %{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\ %{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\ %{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\ # We can't let RPM do the dependencies automatic because it'll then pick up\ # a correct but undesirable perl dependency from the module headers which\ # isn't required for the kernel proper to function\ AutoReq: no\ AutoProv: yes\ %{nil} %package headers Summary: Header files for the Linux kernel for use by glibc Obsoletes: glibc-kernheaders < 3.0-46 Provides: glibc-kernheaders = 3.0-46 %if "0%{?variant}" Obsoletes: kernel-headers < %{rpmversion}-%{pkg_release} Provides: kernel-headers = %{rpmversion}-%{pkg_release} %endif %description headers Kernel-headers includes the C header files that specify the interface between the Linux kernel and userspace libraries and programs. The header files define structures and constants that are needed for building most standard programs and are also needed for rebuilding the glibc package. %package cross-headers Summary: Header files for the Linux kernel for use by cross-glibc %description cross-headers Kernel-cross-headers includes the C header files that specify the interface between the Linux kernel and userspace libraries and programs. The header files define structures and constants that are needed for building most standard programs and are also needed for rebuilding the cross-glibc package. %package debuginfo-common-%{_target_cpu} Summary: Kernel source files used by %{name}-debuginfo packages Provides: installonlypkg(kernel) %description debuginfo-common-%{_target_cpu} This package is required by %{name}-debuginfo subpackages. It provides the kernel source files common to all builds. # # This macro creates a kernel--debuginfo package. # %%kernel_debuginfo_package # %define kernel_debuginfo_package() \ %package %{?1:%{1}-}debuginfo\ Summary: Debug information for package %{name}%{?1:-%{1}}\ Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\ Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\ Provides: installonlypkg(kernel)\ AutoReqProv: no\ %description %{?1:%{1}-}debuginfo\ This package provides debug information for package %{name}%{?1:-%{1}}.\ This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\ %{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '/.*/%%{KVERREL}%{?1:[+]%{1}}/.*|/.*%%{KVERREL}%{?1:\+%{1}}(\.debug)?' -o debuginfo%{?1}.list}\ %{nil} # # This macro creates a kernel--devel package. # %%kernel_devel_package # %define kernel_devel_package() \ %package %{?1:%{1}-}devel\ Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\ Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\ Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\ Provides: kernel-devel-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ Provides: installonlypkg(kernel)\ AutoReqProv: no\ Requires(pre): findutils\ Requires: findutils\ Requires: perl-interpreter\ %description %{?1:%{1}-}devel\ This package provides kernel headers and makefiles sufficient to build modules\ against the %{?2:%{2} }kernel package.\ %{nil} # # This macro creates a kernel--modules-extra package. # %%kernel_modules_extra_package # %define kernel_modules_extra_package() \ %package %{?1:%{1}-}modules-extra\ Summary: Extra kernel modules to match the %{?2:%{2} }kernel\ Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\ Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\ Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}%{?1:+%{1}}\ Provides: installonlypkg(kernel-module)\ Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ Requires: kernel-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ AutoReq: no\ AutoProv: yes\ %description %{?1:%{1}-}modules-extra\ This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\ %{nil} # # This macro creates a kernel--modules package. # %%kernel_modules_package # %define kernel_modules_package() \ %package %{?1:%{1}-}modules\ Summary: kernel modules to match the %{?2:%{2}-}core kernel\ Provides: kernel%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\ Provides: kernel-modules-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\ Provides: kernel-modules = %{version}-%{release}%{?1:+%{1}}\ Provides: installonlypkg(kernel-module)\ Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ Requires: kernel-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ AutoReq: no\ AutoProv: yes\ %description %{?1:%{1}-}modules\ This package provides commonly used kernel modules for the %{?2:%{2}-}core kernel package.\ %{nil} # # this macro creates a kernel- meta package. # %%kernel_meta_package # %define kernel_meta_package() \ %package %{1}\ summary: kernel meta-package for the %{1} kernel\ Requires: kernel-%{1}-core-uname-r = %{KVERREL}%{?variant}+%{1}\ Requires: kernel-%{1}-modules-uname-r = %{KVERREL}%{?variant}+%{1}\ Provides: installonlypkg(kernel)\ %description %{1}\ The meta-package for the %{1} kernel\ %{nil} # # This macro creates a kernel- and its -devel and -debuginfo too. # %%define variant_summary The Linux kernel compiled for # %%kernel_variant_package [-n ] # %define kernel_variant_package(n:) \ %package %{?1:%{1}-}core\ Summary: %{variant_summary}\ Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ Provides: installonlypkg(kernel)\ %ifarch %{power64}\ Obsoletes: kernel-bootwrapper\ %endif\ %{expand:%%kernel_reqprovconf}\ %if %{?1:1} %{!?1:0} \ %{expand:%%kernel_meta_package %{?1:%{1}}}\ %endif\ %{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\ %{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\ %{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\ %{expand:%%kernel_debuginfo_package %{?1:%{1}}}\ %{nil} # Now, each variant package. %if %{with_pae} %ifnarch armv7hl %define variant_summary The Linux kernel compiled for PAE capable machines %kernel_variant_package %{pae} %description %{pae}-core This package includes a version of the Linux kernel with support for up to 64GB of high memory. It requires a CPU with Physical Address Extensions (PAE). The non-PAE kernel can only address up to 4GB of memory. Install the kernel-PAE package if your machine has more than 4GB of memory. %else %define variant_summary The Linux kernel compiled for Cortex-A15 %kernel_variant_package %{pae} %description %{pae}-core This package includes a version of the Linux kernel with support for Cortex-A15 devices with LPAE and HW virtualisation support %endif %define variant_summary The Linux kernel compiled with extra debugging enabled for PAE capable machines %kernel_variant_package %{pae}debug Obsoletes: kernel-PAE-debug %description %{pae}debug-core This package includes a version of the Linux kernel with support for up to 64GB of high memory. It requires a CPU with Physical Address Extensions (PAE). The non-PAE kernel can only address up to 4GB of memory. Install the kernel-PAE package if your machine has more than 4GB of memory. This variant of the kernel has numerous debugging options enabled. It should only be installed when trying to gather additional information on kernel bugs, as some of these options impact performance noticably. %endif %define variant_summary The Linux kernel compiled with extra debugging enabled %kernel_variant_package debug %description debug-core The kernel package contains the Linux kernel (vmlinuz), the core of any Linux operating system. The kernel handles the basic functions of the operating system: memory allocation, process allocation, device input and output, etc. This variant of the kernel has numerous debugging options enabled. It should only be installed when trying to gather additional information on kernel bugs, as some of these options impact performance noticably. # And finally the main -core package %define variant_summary The Linux kernel %kernel_variant_package %description core The kernel package contains the Linux kernel (vmlinuz), the core of any Linux operating system. The kernel handles the basic functions of the operating system: memory allocation, process allocation, device input and output, etc. %prep # do a few sanity-checks for --with *only builds %if %{with_baseonly} %if !%{with_up}%{with_pae} echo "Cannot build --with baseonly, up build is disabled" exit 1 %endif %endif %if "%{baserelease}" == "0" echo "baserelease must be greater than zero" exit 1 %endif # more sanity checking; do it quietly if [ "%{patches}" != "%%{patches}" ] ; then for patch in %{patches} ; do if [ ! -f $patch ] ; then echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing" exit 1 fi done fi 2>/dev/null patch_command='patch -p1 -F1 -s' ApplyPatch() { local patch=$1 shift if [ ! -f $RPM_SOURCE_DIR/$patch ]; then exit 1 fi if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME%%%%%{?variant}}.spec ; then if [ "${patch:0:8}" != "patch-4." ] ; then echo "ERROR: Patch $patch not listed as a source patch in specfile" exit 1 fi fi 2>/dev/null case "$patch" in *.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;; *.gz) gunzip < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;; *.xz) unxz < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;; *) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;; esac } # don't apply patch if it's empty ApplyOptionalPatch() { local patch=$1 shift if [ ! -f $RPM_SOURCE_DIR/$patch ]; then exit 1 fi local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}') if [ "$C" -gt 9 ]; then ApplyPatch $patch ${1+"$@"} fi } # First we unpack the kernel tarball. # If this isn't the first make prep, we use links to the existing clean tarball # which speeds things up quite a bit. # Update to latest upstream. %if 0%{?released_kernel} %define vanillaversion 4.%{base_sublevel} # non-released_kernel case %else %if 0%{?rcrev} %define vanillaversion 4.%{upstream_sublevel}-rc%{rcrev} %if 0%{?gitrev} %define vanillaversion 4.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev} %endif %else # pre-{base_sublevel+1}-rc1 case %if 0%{?gitrev} %define vanillaversion 4.%{base_sublevel}-git%{gitrev} %else %define vanillaversion 4.%{base_sublevel} %endif %endif %endif # %%{vanillaversion} : the full version name, e.g. 2.6.35-rc6-git3 # %%{kversion} : the base version, e.g. 2.6.34 # Use kernel-%%{kversion}%%{?dist} as the top-level directory name # so we can prep different trees within a single git directory. # Build a list of the other top-level kernel tree directories. # This will be used to hardlink identical vanilla subdirs. sharedirs=$(find "$PWD" -maxdepth 1 -type d -name 'kernel-4.*' \ | grep -x -v "$PWD"/kernel-%{kversion}%{?dist}) ||: # Delete all old stale trees. if [ -d kernel-%{kversion}%{?dist} ]; then cd kernel-%{kversion}%{?dist} for i in linux-* do if [ -d $i ]; then # Just in case we ctrl-c'd a prep already rm -rf deleteme.%{_target_cpu} # Move away the stale away, and delete in background. mv $i deleteme-$i rm -rf deleteme* & fi done cd .. fi # Generate new tree if [ ! -d kernel-%{kversion}%{?dist}/vanilla-%{vanillaversion} ]; then if [ -d kernel-%{kversion}%{?dist}/vanilla-%{kversion} ]; then # The base vanilla version already exists. cd kernel-%{kversion}%{?dist} # Any vanilla-* directories other than the base one are stale. for dir in vanilla-*; do [ "$dir" = vanilla-%{kversion} ] || rm -rf $dir & done else rm -f pax_global_header # Look for an identical base vanilla dir that can be hardlinked. for sharedir in $sharedirs ; do if [[ ! -z $sharedir && -d $sharedir/vanilla-%{kversion} ]] ; then break fi done if [[ ! -z $sharedir && -d $sharedir/vanilla-%{kversion} ]] ; then %setup -q -n kernel-%{kversion}%{?dist} -c -T cp -al $sharedir/vanilla-%{kversion} . else %setup -q -n kernel-%{kversion}%{?dist} -c mv linux-%{kversion} vanilla-%{kversion} fi fi %if "%{kversion}" != "%{vanillaversion}" for sharedir in $sharedirs ; do if [[ ! -z $sharedir && -d $sharedir/vanilla-%{vanillaversion} ]] ; then break fi done if [[ ! -z $sharedir && -d $sharedir/vanilla-%{vanillaversion} ]] ; then cp -al $sharedir/vanilla-%{vanillaversion} . else # Need to apply patches to the base vanilla version. cp -al vanilla-%{kversion} vanilla-%{vanillaversion} cd vanilla-%{vanillaversion} cp %{SOURCE12} . # Update vanilla to the latest upstream. # (non-released_kernel case only) %if 0%{?rcrev} xzcat %{SOURCE5000} | ./remove-binary-diff.pl | patch -p1 -F1 -s %if 0%{?gitrev} xzcat %{SOURCE5001} | ./remove-binary-diff.pl | patch -p1 -F1 -s %endif %else # pre-{base_sublevel+1}-rc1 case %if 0%{?gitrev} xzcat %{SOURCE5000} | ./remove-binary-diff.pl | patch -p1 -F1 -s %endif %endif git init git config user.email "kernel-team@fedoraproject.org" git config user.name "Fedora Kernel Team" git config gc.auto 0 git add . git commit -a -q -m "baseline" cd .. fi %endif else # We already have all vanilla dirs, just change to the top-level directory. cd kernel-%{kversion}%{?dist} fi # Now build the fedora kernel tree. cp -al vanilla-%{vanillaversion} linux-%{KVERREL} cd linux-%{KVERREL} if [ ! -d .git ]; then git init git config user.email "kernel-team@fedoraproject.org" git config user.name "Fedora Kernel Team" git config gc.auto 0 git add . git commit -a -q -m "baseline" fi # released_kernel with possible stable updates %if 0%{?stable_base} # This is special because the kernel spec is hell and nothing is consistent xzcat %{SOURCE5000} | patch -p1 -F1 -s git commit -a -m "Stable update" %endif # Note: Even in the "nopatches" path some patches (build tweaks and compile # fixes) will always get applied; see patch defition above for details git am %{patches} # END OF PATCH APPLICATIONS # Any further pre-build tree manipulations happen here. chmod +x scripts/checkpatch.pl chmod +x tools/objtool/sync-check.sh mv COPYING COPYING-%{version} # This Prevents scripts/setlocalversion from mucking with our version numbers. touch .scmversion # Deal with configs stuff mkdir configs cd configs # Drop some necessary files from the source dir into the buildroot cp $RPM_SOURCE_DIR/kernel-*.config . cp %{SOURCE1000} . cp %{SOURCE15} . cp %{SOURCE40} . cp %{SOURCE41} . cp %{SOURCE43} . %if !%{debugbuildsenabled} # The normal build is a really debug build and the user has explicitly requested # a release kernel. Change the config files into non-debug versions. %if !%{with_release} VERSION=%{version} ./generate_debug_configs.sh %else VERSION=%{version} ./generate_all_configs.sh %endif %else VERSION=%{version} ./generate_all_configs.sh %endif # Merge in any user-provided local config option changes %ifnarch %nobuildarches for i in %{all_arch_configs} do mv $i $i.tmp ./merge.pl %{SOURCE1000} $i.tmp > $i rm $i.tmp done %endif # only deal with configs if we are going to build for the arch %ifnarch %nobuildarches %if !%{debugbuildsenabled} rm -f kernel-%{version}-*debug.config %endif %define make make %{?cross_opts} CheckConfigs() { ./check_configs.awk $1 $2 > .mismatches if [ -s .mismatches ] then echo "Error: Mismatches found in configuration files" cat .mismatches exit 1 fi } cp %{SOURCE42} . OPTS="" %if %{listnewconfig_fail} OPTS="$OPTS -n" %endif %if %{configmismatch_fail} OPTS="$OPTS -c" %endif ./process_configs.sh $OPTS kernel %{rpmversion} # end of kernel config %endif cd .. # End of Configs stuff # get rid of unwanted files resulting from patch fuzz find . \( -name "*.orig" -o -name "*~" \) -delete >/dev/null # remove unnecessary SCM files find . -name .gitignore -delete >/dev/null # Mangle /usr/bin/python shebangs to /usr/bin/python3 # Mangle all Python shebangs to be Python 3 explicitly # -p preserves timestamps # -n prevents creating ~backup files # -i specifies the interpreter for the shebang pathfix.py -pni "%{__python3} %{py3_shbang_opts}" scripts/ pathfix.py -pni "%{__python3} %{py3_shbang_opts}" scripts/diffconfig pathfix.py -pni "%{__python3} %{py3_shbang_opts}" scripts/bloat-o-meter pathfix.py -pni "%{__python3} %{py3_shbang_opts}" scripts/show_delta cd .. ### ### build ### %build %if %{with_sparse} %define sparse_mflags C=1 %endif cp_vmlinux() { eu-strip --remove-comment -o "$2" "$1" } # These are for host programs that get built as part of the kernel and # are required to be packaged in kernel-devel for building external modules. # Since they are userspace binaries, they are required to pickup the hardening # flags defined in the macros. The --build-id=uuid is a trick to get around # debuginfo limitations: Typically, find-debuginfo.sh will update the build # id of all binaries to allow for parllel debuginfo installs. The kernel # can't use this because it breaks debuginfo for the vDSO so we have to # use a special mechanism for kernel and modules to be unique. Unfortunately, # we still have userspace binaries which need unique debuginfo and because # they come from the kernel package, we can't just use find-debuginfo.sh to # rewrite only those binaries. The easiest option right now is just to have # the build id be a uuid for the host programs. # # Note we need to disable these flags for cross builds because the flags # from redhat-rpm-config assume that host == target so target arch # flags cause issues with the host compiler. %if !%{with_cross} %define build_hostcflags %{build_cflags} %define build_hostldflags %{build_ldflags} -Wl,--build-id=uuid %endif BuildKernel() { MakeTarget=$1 KernelImage=$2 Flavour=$4 DoVDSO=$3 Flav=${Flavour:++${Flavour}} InstallName=${5:-vmlinuz} # Pick the right config file for the kernel we're building Config=kernel-%{version}-%{_target_cpu}${Flavour:+-${Flavour}}.config DevelDir=/usr/src/kernels/%{KVERREL}${Flav} # When the bootable image is just the ELF kernel, strip it. # We already copy the unstripped file into the debuginfo package. if [ "$KernelImage" = vmlinux ]; then CopyKernel=cp_vmlinux else CopyKernel=cp fi KernelVer=%{version}-%{release}.%{_target_cpu}${Flav} echo BUILDING A KERNEL FOR ${Flavour} %{_target_cpu}... %if 0%{?stable_update} # make sure SUBLEVEL is incremented on a stable release. Sigh 3.x. perl -p -i -e "s/^SUBLEVEL.*/SUBLEVEL = %{?stablerev}/" Makefile %endif # make sure EXTRAVERSION says what we want it to say # Trim the release if this is a CI build, since KERNELVERSION is limited to 64 characters ShortRel=$(python3 -c "import re; print(re.sub(r'\.pr\.[0-9A-Fa-f]{32}', '', '%{release}'))") perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -${ShortRel}.%{_target_cpu}${Flav}/" Makefile # if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme %if !0%{?rcrev} %if 0%{?gitrev} perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{upstream_sublevel}/' Makefile %endif %endif # and now to start the build process make %{?make_opts} mrproper cp configs/$Config .config %if %{signkernel}%{signmodules} cp %{SOURCE11} certs/. %endif Arch=`head -1 .config | cut -b 3-` echo USING ARCH=$Arch make %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}" ARCH=$Arch olddefconfig # This ensures build-ids are unique to allow parallel debuginfo perl -p -i -e "s/^CONFIG_BUILD_SALT.*/CONFIG_BUILD_SALT=\"%{KVERREL}\"/" .config %{make} %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}" ARCH=$Arch %{?_smp_mflags} $MakeTarget %{?sparse_mflags} %{?kernel_mflags} %{make} %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}" ARCH=$Arch %{?_smp_mflags} modules %{?sparse_mflags} || exit 1 mkdir -p $RPM_BUILD_ROOT/%{image_install_path} mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer %if %{with_debuginfo} mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path} %endif %ifarch %{arm} aarch64 %{make} %{?make_opts} ARCH=$Arch dtbs dtbs_install INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer cp -r $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/dtb find arch/$Arch/boot/dts -name '*.dtb' -type f | xargs rm -f %endif # Start installing the results install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer install -m 644 .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/config install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer install -m 644 System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/System.map # We estimate the size of the initramfs because rpm needs to take this size # into consideration when performing disk space calculations. (See bz #530778) dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20 if [ -f arch/$Arch/boot/zImage.stub ]; then cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || : cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/lib/modules/$KernelVer/zImage.stub-$KernelVer || : fi %if %{signkernel} # Sign the image if we're using EFI %pesign -s -i $KernelImage -o vmlinuz.signed if [ ! -s vmlinuz.signed ]; then echo "pesigning failed" exit 1 fi mv vmlinuz.signed $KernelImage %endif $CopyKernel $KernelImage \ $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer cp $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/$InstallName # hmac sign the kernel for FIPS echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac" ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer sha512hmac $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer | sed -e "s,$RPM_BUILD_ROOT,," > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac; cp $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac $RPM_BUILD_ROOT/lib/modules/$KernelVer/.vmlinuz.hmac # Override $(mod-fw) because we don't want it to install any firmware # we'll get it from the linux-firmware package and we don't want conflicts %{make} %{?make_opts} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT modules_install KERNELRELEASE=$KernelVer mod-fw= # add an a noop %%defattr statement 'cause rpm doesn't like empty file list files echo '%%defattr(-,-,-)' > ../kernel${Flavour:+-${Flavour}}-ldsoconf.list if [ $DoVDSO -ne 0 ]; then %{make} %{?make_opts} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer if [ -s ldconfig-kernel.conf ]; then install -D -m 444 ldconfig-kernel.conf \ $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf echo /etc/ld.so.conf.d/kernel-$KernelVer.conf >> ../kernel${Flavour:+-${Flavour}}-ldsoconf.list fi rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/vdso/.build-id fi # And save the headers/makefiles etc for building modules against # # This all looks scary, but the end result is supposed to be: # * all arch relevant include/ files # * all Makefile/Kconfig files # * all script/ files rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source) # dirs for additional modules per module-init-tools, kbuild/modules.txt mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/extra mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates # first copy everything cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build if [ -s Module.markers ]; then cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build fi # then drop all but the needed Makefiles/Kconfig files rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Documentation rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build if [ -f tools/objtool/objtool ]; then cp -a tools/objtool/objtool $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || : # these are a few files associated with objtool cp -a --parents tools/build/Build.include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents tools/build/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents tools/build/fixdep.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents tools/scripts/utilities.mak $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ # also more than necessary but it's not that many more files cp -a --parents tools/objtool/* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents tools/lib/str_error_r.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents tools/lib/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents tools/lib/subcmd/* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ fi if [ -d arch/$Arch/scripts ]; then cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || : fi if [ -f arch/$Arch/*lds ]; then cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || : fi if [ -f arch/%{asmarch}/kernel/module.lds ]; then cp -a --parents arch/%{asmarch}/kernel/module.lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ fi rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/*.o rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/*/*.o %ifarch %{power64} cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ %endif if [ -d arch/%{asmarch}/include ]; then cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ fi %ifarch aarch64 # arch/arm64/include/asm/xen references arch/arm cp -a --parents arch/arm/include/asm/xen $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ # arch/arm64/include/asm/opcodes.h references arch/arm cp -a --parents arch/arm/include/asm/opcodes.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ %endif # include the machine specific headers for ARM variants, if available. %ifarch %{arm} if [ -d arch/%{asmarch}/mach-${Flavour}/include ]; then cp -a --parents arch/%{asmarch}/mach-${Flavour}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ fi # include a few files for 'make prepare' cp -a --parents arch/arm/tools/gen-mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/arm/tools/mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ %endif cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include %ifarch %{ix86} x86_64 # files for 'make prepare' to succeed with kernel-devel cp -a --parents arch/x86/entry/syscalls/syscall_32.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/entry/syscalls/syscalltbl.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/entry/syscalls/syscallhdr.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/entry/syscalls/syscall_64.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/tools/relocs_32.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/tools/relocs_64.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/tools/relocs.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/tools/relocs_common.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/tools/relocs.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ # Yes this is more includes than we probably need. Feel free to sort out # dependencies if you so choose. cp -a --parents tools/include/* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/purgatory/purgatory.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/purgatory/stack.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/purgatory/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/purgatory/setup-x86_64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/purgatory/entry64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/boot/string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/boot/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/boot/ctype.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ %endif # Make sure the Makefile and version.h have a matching timestamp so that # external modules can be built touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h # Copy .config to include/config/auto.conf so "make prepare" is unnecessary. cp $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/.config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf %if %{with_debuginfo} eu-readelf -n vmlinux | grep "Build ID" | awk '{print $NF}' > vmlinux.id cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id # # save the vmlinux file for kernel debugging into the kernel-debuginfo rpm # mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer %endif find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames # mark modules executable so that strip-to-file can strip them xargs --no-run-if-empty chmod u+x < modnames # Generate a list of modules for block and networking. grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA | sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef collect_modules_list() { sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef | LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1 if [ ! -z "$3" ]; then sed -r -e "/^($3)\$/d" -i $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1 fi } collect_modules_list networking \ 'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice' collect_modules_list block \ 'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_alloc_queue|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size' 'pktcdvd.ko|dm-mod.ko' collect_modules_list drm \ 'drm_open|drm_init' collect_modules_list modesetting \ 'drm_crtc_init' # detect missing or incorrect license tags ( find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name '*.ko' | xargs /sbin/modinfo -l | \ grep -E -v 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' ) && exit 1 # remove files that will be auto generated by depmod at rpm -i time pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/ rm -f modules.{alias*,builtin.bin,dep*,*map,symbols*,devname,softdep} popd # Call the modules-extra script to move things around %{SOURCE17} $RPM_BUILD_ROOT/lib/modules/$KernelVer %{SOURCE16} # # Generate the kernel-core and kernel-modules files lists # # Copy the System.map file for depmod to use, and create a backup of the # full module tree so we can restore it after we're done filtering cp System.map $RPM_BUILD_ROOT/. pushd $RPM_BUILD_ROOT mkdir restore cp -r lib/modules/$KernelVer/* restore/. # don't include anything going into k-m-e in the file lists rm -rf lib/modules/$KernelVer/extra # Find all the module files and filter them out into the core and modules # lists. This actually removes anything going into -modules from the dir. find lib/modules/$KernelVer/kernel -name *.ko | sort -n > modules.list cp $RPM_SOURCE_DIR/filter-*.sh . %{SOURCE99} modules.list %{_target_cpu} rm filter-*.sh # Run depmod on the resulting module tree and make sure it isn't broken depmod -b . -aeF ./System.map $KernelVer &> depmod.out if [ -s depmod.out ]; then echo "Depmod failure" cat depmod.out exit 1 else rm depmod.out fi # remove files that will be auto generated by depmod at rpm -i time pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/ rm -f modules.{alias*,builtin.bin,dep*,*map,symbols*,devname,softdep} popd # Go back and find all of the various directories in the tree. We use this # for the dir lists in kernel-core find lib/modules/$KernelVer/kernel -mindepth 1 -type d | sort -n > module-dirs.list # Cleanup rm System.map cp -r restore/* lib/modules/$KernelVer/. rm -rf restore popd # Make sure the files lists start with absolute paths or rpmbuild fails. # Also add in the dir entries sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Flavour:+-${Flavour}}-modules.list sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Flavour:+-${Flavour}}-core.list sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Flavour:+-${Flavour}}-core.list # Cleanup rm -f $RPM_BUILD_ROOT/k-d.list rm -f $RPM_BUILD_ROOT/modules.list rm -f $RPM_BUILD_ROOT/module-dirs.list %if %{signmodules} # Save the signing keys so we can sign the modules in __modsign_install_post cp certs/signing_key.pem certs/signing_key.pem.sign${Flav} cp certs/signing_key.x509 certs/signing_key.x509.sign${Flav} %endif # Move the devel headers out of the root file system mkdir -p $RPM_BUILD_ROOT/usr/src/kernels mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir # This is going to create a broken link during the build, but we don't use # it after this point. We need the link to actually point to something # when kernel-devel is installed, and a relative link doesn't work across # the F17 UsrMove feature. ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build # prune junk from kernel-devel find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -exec rm -f {} \; # build a BLS config for this kernel %{SOURCE43} "$KernelVer" "$RPM_BUILD_ROOT" "%{?variant}" } ### # DO it... ### # prepare directories rm -rf $RPM_BUILD_ROOT mkdir -p $RPM_BUILD_ROOT/boot mkdir -p $RPM_BUILD_ROOT%{_libexecdir} cd linux-%{KVERREL} %if %{with_debug} BuildKernel %make_target %kernel_image %{_use_vdso} debug %endif %if %{with_pae_debug} BuildKernel %make_target %kernel_image %{use_vdso} %{pae}debug %endif %if %{with_pae} BuildKernel %make_target %kernel_image %{use_vdso} %{pae} %endif %if %{with_up} BuildKernel %make_target %kernel_image %{_use_vdso} %endif # In the modsign case, we do 3 things. 1) We check the "flavour" and hard # code the value in the following invocations. This is somewhat sub-optimal # but we're doing this inside of an RPM macro and it isn't as easy as it # could be because of that. 2) We restore the .tmp_versions/ directory from # the one we saved off in BuildKernel above. This is to make sure we're # signing the modules we actually built/installed in that flavour. 3) We # grab the arch and invoke mod-sign.sh command to actually sign the modules. # # We have to do all of those things _after_ find-debuginfo runs, otherwise # that will strip the signature off of the modules. %define __modsign_install_post \ if [ "%{signmodules}" -eq "1" ]; then \ if [ "%{with_pae}" -ne "0" ]; then \ %{modsign_cmd} certs/signing_key.pem.sign+%{pae} certs/signing_key.x509.sign+%{pae} $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+%{pae}/ \ fi \ if [ "%{with_debug}" -ne "0" ]; then \ %{modsign_cmd} certs/signing_key.pem.sign+debug certs/signing_key.x509.sign+debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+debug/ \ fi \ if [ "%{with_pae_debug}" -ne "0" ]; then \ %{modsign_cmd} certs/signing_key.pem.sign+%{pae}debug certs/signing_key.x509.sign+%{pae}debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+%{pae}debug/ \ fi \ if [ "%{with_up}" -ne "0" ]; then \ %{modsign_cmd} certs/signing_key.pem.sign certs/signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \ fi \ fi \ if [ "%{zipmodules}" -eq "1" ]; then \ find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs xz; \ fi \ %{nil} ### ### Special hacks for debuginfo subpackages. ### # This macro is used by %%install, so we must redefine it before that. %define debug_package %{nil} %if %{with_debuginfo} %ifnarch noarch %global __debug_package 1 %files -f debugfiles.list debuginfo-common-%{_target_cpu} %endif %endif # # Disgusting hack alert! We need to ensure we sign modules *after* all # invocations of strip occur, which is in __debug_install_post if # find-debuginfo.sh runs, and __os_install_post if not. # %define __spec_install_post \ %{?__debug_package:%{__debug_install_post}}\ %{__arch_install_post}\ %{__os_install_post}\ %{__modsign_install_post} ### ### install ### %install cd linux-%{KVERREL} # We have to do the headers install before the tools install because the # kernel headers_install will remove any header files in /usr/include that # it doesn't install itself. %if %{with_headers} # Install kernel headers make ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install find $RPM_BUILD_ROOT/usr/include \ \( -name .install -o -name .check -o \ -name ..install.cmd -o -name ..check.cmd \) | xargs rm -f %endif %if %{with_cross_headers} mkdir -p $RPM_BUILD_ROOT/usr/tmp-headers make ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr/tmp-headers headers_install_all find $RPM_BUILD_ROOT/usr/tmp-headers/include \ \( -name .install -o -name .check -o \ -name ..install.cmd -o -name ..check.cmd \) | xargs rm -f # Copy all the architectures we care about to their respective asm directories for arch in arm arm64 powerpc s390 x86 ; do mkdir -p $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include mv $RPM_BUILD_ROOT/usr/tmp-headers/include/arch-${arch}/asm $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/ cp -a $RPM_BUILD_ROOT/usr/tmp-headers/include/asm-generic $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/. done # Remove the rest of the architectures rm -rf $RPM_BUILD_ROOT/usr/tmp-headers/include/arch* rm -rf $RPM_BUILD_ROOT/usr/tmp-headers/include/asm-* # Copy the rest of the headers over for arch in arm arm64 powerpc s390 x86 ; do cp -a $RPM_BUILD_ROOT/usr/tmp-headers/include/* $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/. done rm -rf $RPM_BUILD_ROOT/usr/tmp-headers %endif ### ### clean ### ### ### scripts ### # # This macro defines a %%post script for a kernel*-devel package. # %%kernel_devel_post [] # %define kernel_devel_post() \ %{expand:%%post %{?1:%{1}-}devel}\ if [ -f /etc/sysconfig/kernel ]\ then\ . /etc/sysconfig/kernel || exit $?\ fi\ if [ "$HARDLINK" != "no" -a -x /usr/sbin/hardlink ]\ then\ (cd /usr/src/kernels/%{KVERREL}%{?1:+%{1}} &&\ /usr/bin/find . -type f | while read f; do\ hardlink -c /usr/src/kernels/*.fc*.*/$f $f\ done)\ fi\ %{nil} # # This macro defines a %%post script for a kernel*-modules-extra package. # It also defines a %%postun script that does the same thing. # %%kernel_modules_extra_post [] # %define kernel_modules_extra_post() \ %{expand:%%post %{?1:%{1}-}modules-extra}\ /sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ %{nil}\ %{expand:%%postun %{?1:%{1}-}modules-extra}\ /sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ %{nil} # # This macro defines a %%post script for a kernel*-modules package. # It also defines a %%postun script that does the same thing. # %%kernel_modules_post [] # %define kernel_modules_post() \ %{expand:%%post %{?1:%{1}-}modules}\ /sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ %{nil}\ %{expand:%%postun %{?1:%{1}-}modules}\ /sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ %{nil} # This macro defines a %%posttrans script for a kernel package. # %%kernel_variant_posttrans [] # More text can follow to go at the end of this variant's %%post. # %define kernel_variant_posttrans() \ %{expand:%%posttrans %{?1:%{1}-}core}\ /bin/kernel-install add %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\ %{nil} # # This macro defines a %%post script for a kernel package and its devel package. # %%kernel_variant_post [-v ] [-r ] # More text can follow to go at the end of this variant's %%post. # %define kernel_variant_post(v:r:) \ %{expand:%%kernel_devel_post %{?-v*}}\ %{expand:%%kernel_modules_post %{?-v*}}\ %{expand:%%kernel_modules_extra_post %{?-v*}}\ %{expand:%%kernel_variant_posttrans %{?-v*}}\ %{expand:%%post %{?-v*:%{-v*}-}core}\ %{-r:\ if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\ [ -f /etc/sysconfig/kernel ]; then\ /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\ fi}\ %{nil} # # This macro defines a %%preun script for a kernel package. # %%kernel_variant_preun # %define kernel_variant_preun() \ %{expand:%%preun %{?1:%{1}-}core}\ /bin/kernel-install remove %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\ %{nil} %kernel_variant_preun %kernel_variant_post -r kernel-smp %if %{with_pae} %kernel_variant_preun %{pae} %kernel_variant_post -v %{pae} -r (kernel|kernel-smp) %kernel_variant_post -v %{pae}debug -r (kernel|kernel-smp) %kernel_variant_preun %{pae}debug %endif %kernel_variant_preun debug %kernel_variant_post -v debug if [ -x /sbin/ldconfig ] then /sbin/ldconfig -X || exit $? fi ### ### file lists ### %if %{with_headers} %files headers /usr/include/* %endif %if %{with_cross_headers} %files cross-headers /usr/*-linux-gnu/include/* %endif # empty meta-package %files # This is %%{image_install_path} on an arch where that includes ELF files, # or empty otherwise. %define elf_image_install_path %{?kernel_image_elf:%{image_install_path}} # # This macro defines the %%files sections for a kernel package # and its devel and debuginfo packages. # %%kernel_variant_files [-k vmlinux] # %define kernel_variant_files(k:) \ %if %{2}\ %{expand:%%files -f kernel-%{?3:%{3}-}core.list %{?1:-f kernel-%{?3:%{3}-}ldsoconf.list} %{?3:%{3}-}core}\ %{!?_licensedir:%global license %%doc}\ %license linux-%{KVERREL}/COPYING-%{version}\ /lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}\ %ghost /%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?3:+%{3}}\ /lib/modules/%{KVERREL}%{?3:+%{3}}/.vmlinuz.hmac \ %ghost /%{image_install_path}/.vmlinuz-%{KVERREL}%{?3:+%{3}}.hmac \ %ifarch %{arm} aarch64\ /lib/modules/%{KVERREL}%{?3:+%{3}}/dtb \ %ghost /%{image_install_path}/dtb-%{KVERREL}%{?3:+%{3}} \ %endif\ %attr(600,root,root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\ %ghost /boot/System.map-%{KVERREL}%{?3:+%{3}}\ /lib/modules/%{KVERREL}%{?3:+%{3}}/config\ %ghost /boot/config-%{KVERREL}%{?3:+%{3}}\ %ghost /boot/initramfs-%{KVERREL}%{?3:+%{3}}.img\ %dir /lib/modules\ %dir /lib/modules/%{KVERREL}%{?3:+%{3}}\ %dir /lib/modules/%{KVERREL}%{?3:+%{3}}/kernel\ /lib/modules/%{KVERREL}%{?3:+%{3}}/build\ /lib/modules/%{KVERREL}%{?3:+%{3}}/source\ /lib/modules/%{KVERREL}%{?3:+%{3}}/updates\ /lib/modules/%{KVERREL}%{?3:+%{3}}/bls.conf\ %if %{1}\ /lib/modules/%{KVERREL}%{?3:+%{3}}/vdso\ %endif\ /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.*\ %{expand:%%files -f kernel-%{?3:%{3}-}modules.list %{?3:%{3}-}modules}\ %{expand:%%files %{?3:%{3}-}devel}\ %defverify(not mtime)\ /usr/src/kernels/%{KVERREL}%{?3:+%{3}}\ %{expand:%%files %{?3:%{3}-}modules-extra}\ /lib/modules/%{KVERREL}%{?3:+%{3}}/extra\ %if %{with_debuginfo}\ %ifnarch noarch\ %{expand:%%files -f debuginfo%{?3}.list %{?3:%{3}-}debuginfo}\ %endif\ %endif\ %if %{?3:1} %{!?3:0}\ %{expand:%%files %{3}}\ %endif\ %endif\ %{nil} %kernel_variant_files %{_use_vdso} %{with_up} %kernel_variant_files %{_use_vdso} %{with_debug} debug %kernel_variant_files %{use_vdso} %{with_pae} %{pae} %kernel_variant_files %{use_vdso} %{with_pae_debug} %{pae}debug # plz don't put in a version string unless you're going to tag # and build. # # %changelog * Fri Oct 05 2018 Jeremy Cline - 4.19.0-0.rc6.git4.1 - Linux v4.19-rc6-223-gbefad944e231 * Thu Oct 04 2018 Jeremy Cline - 4.19.0-0.rc6.git3.1 - Linux v4.19-rc6-177-gcec4de302c5f * Wed Oct 03 2018 Jeremy Cline - 4.19.0-0.rc6.git2.1 - Linux v4.19-rc6-37-g6bebe37927f3 * Tue Oct 02 2018 Jeremy Cline - 4.19.0-0.rc6.git1.1 - Linux v4.19-rc6-29-g1d2ba7fee28b - Re-enable debugging options. * Mon Oct 01 2018 Laura Abbott - Disable CONFIG_CRYPTO_DEV_SP_PSP (rhbz 1608242) * Mon Oct 01 2018 Jeremy Cline - 4.19.0-0.rc6.git0.1 - Linux v4.19-rc6 * Mon Oct 01 2018 Jeremy Cline - Disable debugging options. * Mon Oct 1 2018 Peter Robinson - Support loading device specific NVRAM files on brcm WiFi devices * Fri Sep 28 2018 Jeremy Cline - 4.19.0-0.rc5.git3.1 - Linux v4.19-rc5-159-gad0371482b1e * Wed Sep 26 2018 Peter Robinson - Add thermal trip to bcm283x (Raspberry Pi) cpufreq - Add initial RockPro64 DT support * Wed Sep 26 2018 Jeremy Cline - 4.19.0-0.rc5.git2.1 - Linux v4.19-rc5-143-gc307aaf3eb47 * Tue Sep 25 2018 Jeremy Cline - 4.19.0-0.rc5.git1.1 - Linux v4.19-rc5-99-g8c0f9f5b309d - Re-enable debugging options. * Mon Sep 24 2018 Jeremy Cline - 4.19.0-0.rc5.git0.1 - Linux v4.19-rc5 * Mon Sep 24 2018 Jeremy Cline - Disable debugging options. * Fri Sep 21 2018 Jeremy Cline - 4.19.0-0.rc4.git4.1 - Linux v4.19-rc4-176-g211b100a5ced * Thu Sep 20 2018 Jeremy Cline - 4.19.0-0.rc4.git3.1 - Linux v4.19-rc4-137-gae596de1a0c8 * Wed Sep 19 2018 Jeremy Cline - 4.19.0-0.rc4.git2.1 - Linux v4.19-rc4-86-g4ca719a338d5 * Tue Sep 18 2018 Jeremy Cline - 4.19.0-0.rc4.git1.1 - Linux v4.19-rc4-78-g5211da9ca526 - Enable debugging options. * Mon Sep 17 2018 Jeremy Cline - 4.19.0-0.rc4.git0.1 - Linux v4.19-rc4 * Mon Sep 17 2018 Jeremy Cline - Stop including the i686-PAE config in the sources - Disable debugging options. * Fri Sep 14 2018 Jeremy Cline - 4.19.0-0.rc3.git3.1 - Linux v4.19-rc3-247-gf3c0b8ce4840 * Thu Sep 13 2018 Jeremy Cline - 4.19.0-0.rc3.git2.1 - Linux v4.19-rc3-130-g54eda9df17f3 * Thu Sep 13 2018 Hans de Goede - Add patch silencing "EFI stub: UEFI Secure Boot is enabled." at boot * Wed Sep 12 2018 Jeremy Cline - 4.19.0-0.rc3.git1.1 - Linux v4.19-rc3-21-g5e335542de83 - Re-enable debugging options. * Mon Sep 10 2018 Jeremy Cline - 4.19.0-0.rc3.git0.1 - Linux v4.19-rc3 * Mon Sep 10 2018 Jeremy Cline - Disable debugging options. * Fri Sep 07 2018 Jeremy Cline - 4.19.0-0.rc2.git3.1 - Linux v4.19-rc2-205-ga49a9dcce802 * Thu Sep 06 2018 Jeremy Cline - 4.19.0-0.rc2.git2.1 - Linux v4.19-rc2-163-gb36fdc6853a3 * Wed Sep 05 2018 Jeremy Cline - 4.19.0-0.rc2.git1.1 - Linux v4.19-rc2-107-g28619527b8a7 - Re-enable debugging options * Mon Sep 3 2018 Peter Robinson - Enable bcm283x VCHIQ, camera and analog audio drivers - ARM config updates for 4.19 * Mon Sep 03 2018 Jeremy Cline - 4.19.0-0.rc2.git0.1 - Linux v4.19-rc2 * Mon Sep 03 2018 Jeremy Cline - Disable debugging options. * Fri Aug 31 2018 Jeremy Cline - 4.19.0-0.rc1.git4.1 - Linux v4.19-rc1-195-g4658aff6eeaa * Thu Aug 30 2018 Jeremy Cline - 4.19.0-0.rc1.git3.1 - Linux v4.19-rc1-124-g58c3f14f86c9 * Wed Aug 29 2018 Jeremy Cline - Enable the AFS module (rhbz 1616016) * Wed Aug 29 2018 Jeremy Cline - 4.19.0-0.rc1.git2.1 - Linux v4.19-rc1-95-g3f16503b7d22 * Tue Aug 28 2018 Jeremy Cline - 4.19.0-0.rc1.git1.1 - Linux v4.19-rc1-88-g050cdc6c9501 - Re-enable debugging options * Mon Aug 27 2018 Jeremy Cline - 4.19.0-0.rc1.git0.1 - Linux v4.19-rc1 * Mon Aug 27 2018 Jeremy Cline - Disable debugging options. * Sat Aug 25 2018 Jeremy Cline - 4.19.0-0.rc0.git12.1 - Linux v4.18-12872-g051935978432 * Fri Aug 24 2018 Jeremy Cline - 4.19.0-0.rc0.git11.1 - Linux v4.18-12721-g33e17876ea4e * Thu Aug 23 2018 Jeremy Cline - 4.19.0-0.rc0.git10.1 - Linux v4.18-11682-g815f0ddb346c * Wed Aug 22 2018 Jeremy Cline - 4.19.0-0.rc0.git9.1 - Linux v4.18-11219-gad1d69735878 * Tue Aug 21 2018 Jeremy Cline - 4.19.0-0.rc0.git8.1 - Linux v4.18-10986-g778a33959a8a * Mon Aug 20 2018 Jeremy Cline - 4.19.0-0.rc0.git7.1 - Linux v4.18-10721-g2ad0d5269970 * Sun Aug 19 2018 Jeremy Cline - 4.19.0-0.rc0.git6.1 - Linux v4.18-10568-g08b5fa819970 * Sat Aug 18 2018 Jeremy Cline - 4.19.0-0.rc0.git5.1 - Linux v4.18-8895-g1f7a4c73a739 * Fri Aug 17 2018 Laura Abbott - Enable CONFIG_AF_KCM (rhbz 1613819) * Fri Aug 17 2018 Jeremy Cline - 4.19.0-0.rc0.git4.1 - Linux v4.18-8108-g5c60a7389d79 - Re-enable AEGIS and MORUS ciphers (rhbz 1610180) * Thu Aug 16 2018 Jeremy Cline - 4.19.0-0.rc0.git3.1 - Linux v4.18-7873-gf91e654474d4 * Wed Aug 15 2018 Peter Robinson - Drop PPC64 (Big Endian) configs * Wed Aug 15 2018 Laura Abbott - 4.19.0-0.rc0.git2.1 - Linux v4.18-2978-g1eb46908b35d * Tue Aug 14 2018 Jeremy Cline - 4.19.0-0.rc0.git1.1 - Reenable debugging options. - Linux v4.18-1283-g10f3e23f07cb * Mon Aug 13 2018 Laura Abbott - 4.18.0-1 - Linux v4.18 - Disable debugging options. * Mon Aug 13 2018 Peter Robinson - Disable speck crypto cipher * Sat Aug 11 2018 Peter Robinson - Add ZYNQMP clock and firmware driver * Fri Aug 10 2018 Laura Abbott - 4.18.0-0.rc8.git2.1 - Linux v4.18-rc8-4-gfedb8da96355 * Fri Aug 10 2018 Hans de Goede - Sync FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER bugfix with upstream * Wed Aug 08 2018 Laura Abbott - 4.18.0-0.rc8.git1.1 - Linux v4.18-rc8-2-g1236568ee3cb * Wed Aug 08 2018 Laura Abbott - Reenable debugging options. * Mon Aug 06 2018 Hans de Goede - Add one more FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER bugfix patch * Mon Aug 06 2018 Laura Abbott - 4.18.0-0.rc8.git0.1 - Linux v4.18-rc8 * Mon Aug 06 2018 Laura Abbott - Disable debugging options. * Sat Aug 04 2018 Laura Abbott - 4.18.0-0.rc7.git3.1 - Linux v4.18-rc7-178-g0b5b1f9a78b5 * Thu Aug 02 2018 Laura Abbott - 4.18.0-0.rc7.git2.1 - Linux v4.18-rc7-112-g6b4703768268 * Thu Aug 2 2018 Peter Robinson - Add ARM Helios4 support * Wed Aug 01 2018 Hans de Goede - Add patch fixing FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER breaking VT switching when combined with vgacon (rhbz#1610562) - Enable Apollo Lake Whiskey Cove PMIC support * Wed Aug 01 2018 Laura Abbott - 4.18.0-0.rc7.git1.1 - Linux v4.18-rc7-90-gc1d61e7fe376 * Wed Aug 01 2018 Laura Abbott - Reenable debugging options. * Wed Aug 01 2018 Jeremy Cline - Enable AEGIS and MORUS ciphers (rhbz 1610180) * Tue Jul 31 2018 Peter Robinson - Add two bcm283x vc4 stability patches - Some AllWinner MMC driver fixes * Tue Jul 31 2018 Hans de Goede - Add patch to fix FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER on s390x and re-enable FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER on s390x * Mon Jul 30 2018 Laura Abbott - 4.18.0-0.rc7.git0.1 - Linux v4.18-rc7 * Mon Jul 30 2018 Laura Abbott - Disable debugging options. * Mon Jul 30 2018 Hans de Goede - Add patch queued in -next to make quiet more quiet - Add patches queued in -next to make efifb / fbcon retain the vendor logo (ACPI BRGT boot graphics) until the first text is output to the console - Enable support for ICN8505 touchscreen used on some Cherry Trail tablets * Fri Jul 27 2018 Peter Robinson - Enable FPGA Manager kernel framework * Fri Jul 27 2018 Laura Abbott - 4.18.0-0.rc6.git3.1 - Linux v4.18-rc6-152-gcd3f77d74ac3 - Disable headers in preparation for kernel headers split * Thu Jul 26 2018 Laura Abbott - 4.18.0-0.rc6.git2.1 - Linux v4.18-rc6-110-g6e77b267723c * Thu Jul 26 2018 Peter Robinson - Add Raspberry Pi voltage sensor driver * Wed Jul 25 2018 Laura Abbott - 4.18.0-0.rc6.git1.1 - Linux v4.18-rc6-93-g9981b4fb8684 * Wed Jul 25 2018 Laura Abbott - Reenable debugging options. * Mon Jul 23 2018 Laura Abbott - 4.18.0-0.rc6.git0.1 - Linux v4.18-rc6 * Mon Jul 23 2018 Laura Abbott - Disable debugging options. * Fri Jul 20 2018 Laura Abbott - 4.18.0-0.rc5.git4.1 - Linux v4.18-rc5-290-g28c20cc73b9c * Thu Jul 19 2018 Laura Abbott - 4.18.0-0.rc5.git3.1 - Linux v4.18-rc5-264-gf39f28ff82c1 * Wed Jul 18 2018 Laura Abbott - 4.18.0-0.rc5.git2.1 - Linux v4.18-rc5-37-g3c53776e29f8 * Tue Jul 17 2018 Laura Abbott - 4.18.0-0.rc5.git1.1 - Linux v4.18-rc5-36-g30b06abfb92b - Fix aio uapi breakage (rhbz 1601529) * Tue Jul 17 2018 Laura Abbott - Reenable debugging options. * Mon Jul 16 2018 Laura Abbott - 4.18.0-0.rc5.git0.1 - Linux v4.18-rc5 * Mon Jul 16 2018 Laura Abbott - Disable debugging options. * Fri Jul 13 2018 Laura Abbott - 4.18.0-0.rc4.git4.1 - Linux v4.18-rc4-71-g63f047771621 * Thu Jul 12 2018 Laura Abbott - Proper support for parallel debuginfo and hardening flags * Thu Jul 12 2018 Javier Martinez Canillas - Drop the id field from generated BLS snippets * Thu Jul 12 2018 Laura Abbott - 4.18.0-0.rc4.git3.1 - Linux v4.18-rc4-69-gc25c74b7476e * Wed Jul 11 2018 Laura Abbott - 4.18.0-0.rc4.git2.1 - Linux v4.18-rc4-17-g1e09177acae3 * Tue Jul 10 2018 Laura Abbott - 4.18.0-0.rc4.git1.1 - Linux v4.18-rc4-7-g092150a25cb7 * Tue Jul 10 2018 Laura Abbott - Reenable debugging options. * Mon Jul 09 2018 Laura Abbott - 4.18.0-0.rc4.git0.1 - Linux v4.18-rc4 * Mon Jul 09 2018 Laura Abbott - Disable debugging options. * Mon Jul 9 2018 Peter Robinson - Add fix for AllWinner A64 timer scew errata * Fri Jul 06 2018 Laura Abbott - 4.18.0-0.rc3.git3.1 - Linux v4.18-rc3-183-gc42c12a90545 * Thu Jul 05 2018 Laura Abbott - 4.18.0-0.rc3.git2.1 - Linux v4.18-rc3-134-g06c85639897c * Tue Jul 03 2018 Laura Abbott - 4.18.0-0.rc3.git1.1 - Linux v4.18-rc3-107-gd0fbad0aec1d * Tue Jul 03 2018 Laura Abbott - Reenable debugging options. * Mon Jul 02 2018 Laura Abbott - 4.18.0-0.rc3.git0.1 - Linux v4.18-rc3 * Mon Jul 02 2018 Laura Abbott - Disable debugging options. * Fri Jun 29 2018 Laura Abbott - 4.18.0-0.rc2.git4.1 - Linux v4.18-rc2-207-gcd993fc4316d * Fri Jun 29 2018 Peter Robinson - Add a possible i.MX6 sdhci fix * Thu Jun 28 2018 Laura Abbott - 4.18.0-0.rc2.git3.1 - Linux v4.18-rc2-132-gf57494321cbf * Tue Jun 26 2018 Laura Abbott - Enable leds-pca9532 module (rhbz 1595163) * Tue Jun 26 2018 Laura Abbott - 4.18.0-0.rc2.git2.1 - Linux v4.18-rc2-44-g813835028e9a * Mon Jun 25 2018 Laura Abbott - 4.18.0-0.rc2.git1.1 - Linux v4.18-rc2-37-g6f0d349d922b - Fix for aarch64 bpf (rhbz 1594447) * Mon Jun 25 2018 Laura Abbott - Reenable debugging options. * Mon Jun 25 2018 Laura Abbott - 4.18.0-0.rc2.git0.1 - Linux v4.18-rc2 * Mon Jun 25 2018 Laura Abbott - Disable debugging options. * Mon Jun 25 2018 Peter Robinson - Disable BFP JIT on ARMv7 as it's currently broken - Remove forced console on aarch64, legacy config (rhbz 1594402) * Fri Jun 22 2018 Laura Abbott - 4.18.0-0.rc1.git4.1 - Linux v4.18-rc1-189-g894b8c000ae6 * Thu Jun 21 2018 Laura Abbott - 4.18.0-0.rc1.git3.1 - Linux v4.18-rc1-107-g1abd8a8f39cd * Wed Jun 20 2018 Laura Abbott - 4.18.0-0.rc1.git2.1 - Linux v4.18-rc1-52-g81e97f01371f * Tue Jun 19 2018 Laura Abbott - 4.18.0-0.rc1.git1.1 - Linux v4.18-rc1-43-gba4dbdedd3ed * Tue Jun 19 2018 Laura Abbott - Reenable debugging options. * Mon Jun 18 2018 Laura Abbott - 4.18.0-0.rc1.git0.1 - Linux v4.18-rc1 * Mon Jun 18 2018 Laura Abbott - Disable debugging options. * Fri Jun 15 2018 Laura Abbott - 4.18.0-0.rc0.git10.1 - Linux v4.17-12074-g4c5e8fc62d6a * Fri Jun 15 2018 Peter Robinson - ARM updates for 4.18, cleanup some dropped config options - Disable zoron driver, moved to staging for removal upstream * Thu Jun 14 2018 Laura Abbott - 4.18.0-0.rc0.git9.1 - Linux v4.17-11928-g2837461dbe6f * Wed Jun 13 2018 Laura Abbott - 4.18.0-0.rc0.git8.1 - Linux v4.17-11782-gbe779f03d563 * Wed Jun 13 2018 Jeremy Cline - Fix kexec_file_load pefile signature verification (rhbz 1470995) * Tue Jun 12 2018 Laura Abbott - 4.18.0-0.rc0.git7.1 - Linux v4.17-11346-g8efcf34a2639 * Mon Jun 11 2018 Justin M. Forbes - Secure Boot updates * Mon Jun 11 2018 Laura Abbott - 4.18.0-0.rc0.git6.1 - Linux v4.17-10288-ga2225d931f75 * Fri Jun 08 2018 Laura Abbott - 4.18.0-0.rc0.git5.1 - Linux v4.17-7997-g68abbe729567 * Thu Jun 07 2018 Laura Abbott - 4.18.0-0.rc0.git4.1 - Linux v4.17-6625-g1c8c5a9d38f6 * Wed Jun 06 2018 Laura Abbott - 4.18.0-0.rc0.git3.1 - Linux v4.17-3754-g135c5504a600 * Tue Jun 05 2018 Jeremy Cline - Enable CONFIG_SCSI_DH on s390x (rhbz 1586189) * Tue Jun 05 2018 Laura Abbott - 4.18.0-0.rc0.git2.1 - Linux v4.17-1535-g5037be168f0e * Mon Jun 04 2018 Laura Abbott - 4.18.0-0.rc0.git1.1 - Linux v4.17-505-g9214407d1237 * Mon Jun 04 2018 Laura Abbott - Reenable debugging options. * Mon Jun 04 2018 Justin M. Forbes - 4.17.0-1 - Linux v4.17 - Disable debugging options. * Sun Jun 3 2018 Peter Robinson - Initial support for Raspberry Pi cpufreq driver * Thu May 31 2018 Justin M. Forbes - 4.17.0-0.rc7.git2.1 - Linux v4.17-rc7-43-gdd52cb879063 * Wed May 30 2018 Justin M. Forbes - 4.17.0-0.rc7.git1.1 - Linux v4.17-rc7-31-g0044cdeb7313 - Reenable debugging options. * Tue May 29 2018 Justin M. Forbes - 4.17.0-0.rc7.git0.1 - Linux v4.17-rc7 * Tue May 29 2018 Justin M. Forbes - Disable debugging options. * Fri May 25 2018 Jeremy Cline - 4.17.0-0.rc6.git3.1 - Linux v4.17-rc6-224-g62d18ecfa641 * Fri May 25 2018 Jeremy Cline - Fix for incorrect error message about parsing PCCT (rhbz 1435837) * Thu May 24 2018 Justin M. Forbes - 4.17.0-0.rc6.git2.1 - Linux v4.17-rc6-158-gbee797529d7c - Reenable debugging options. * Mon May 21 2018 Justin M. Forbes - 4.17.0-0.rc6.git1.1 - Linux v4.17-rc6-146-g5997aab0a11e * Mon May 21 2018 Justin M. Forbes - 4.17.0-0.rc6.git0.1 - Linux v4.17-rc6 - Disable debugging options. * Sun May 20 2018 Hans de Goede - Enable GPIO_AMDPT, PINCTRL_AMD and X86_AMD_PLATFORM_DEVICE Kconfig options to fix i2c and GPIOs not working on AMD based laptops (rhbz#1510649) * Fri May 18 2018 Justin M. Forbes - 4.17.0-0.rc5.git3.1 - Linux v4.17-rc5-110-g2c71d338bef2 * Thu May 17 2018 Justin M. Forbes - 4.17.0-0.rc5.git2.1 - Linux v4.17-rc5-65-g58ddfe6c3af9 * Tue May 15 2018 Justin M. Forbes - 4.17.0-0.rc5.git1.1 - Linux v4.17-rc5-20-g21b9f1c7e319 - Reenable debugging options. * Mon May 14 2018 Justin M. Forbes - 4.17.0-0.rc5.git0.1 - Linux v4.17-rc5 * Mon May 14 2018 Justin M. Forbes - Disable debugging options. * Fri May 11 2018 Justin M. Forbes - 4.17.0-0.rc4.git4.1 - Linux v4.17-rc4-96-g41e3e1082367 * Thu May 10 2018 Peter Robinson - Add fix from linux-next for mvebu Armada 8K macbin boot regression * Thu May 10 2018 Justin M. Forbes - 4.17.0-0.rc4.git3.1 - Linux v4.17-rc4-38-g008464a9360e * Wed May 09 2018 Jeremy Cline - Workaround for m400 uart irq firmware description (rhbz 1574718) * Wed May 09 2018 Justin M. Forbes - 4.17.0-0.rc4.git2.1 - Linux v4.17-rc4-31-g036db8bd9637 * Tue May 08 2018 Justin M. Forbes - 4.17.0-0.rc4.git1.1 - Linux v4.17-rc4-12-gf142f08bf7ec - Reenable debugging options. * Mon May 07 2018 Justin M. Forbes - 4.17.0-0.rc4.git0.1 - Linux v4.17-rc4 * Mon May 07 2018 Justin M. Forbes - Disable debugging options. * Sat May 5 2018 Peter Robinson - Fix USB-2 on Tegra devices * Fri May 04 2018 Laura Abbott - Fix for building out of tree modules on powerpc (rhbz 1574604) * Fri May 04 2018 Justin M. Forbes - 4.17.0-0.rc3.git4.1 - Linux v4.17-rc3-148-g625e2001e99e * Thu May 03 2018 Justin M. Forbes - 4.17.0-0.rc3.git3.1 - Linux v4.17-rc3-36-gc15f6d8d4715 * Wed May 02 2018 Justin M. Forbes - 4.17.0-0.rc3.git2.1 - Linux v4.17-rc3-13-g2d618bdf7163 * Tue May 01 2018 Justin M. Forbes - 4.17.0-0.rc3.git1.1 - Linux v4.17-rc3-5-gfff75eb2a08c - Reenable debugging options. * Mon Apr 30 2018 Justin M. Forbes - 4.17.0-0.rc3.git0.1 - Linux v4.17-rc3 * Mon Apr 30 2018 Justin M. Forbes - Disable debugging options. * Fri Apr 27 2018 Justin M. Forbes - 4.17.0-0.rc2.git3.1 - Linux v4.17-rc2-155-g0644f186fc9d * Fri Apr 27 2018 Peter Robinson - Enable QLogic NICs on ARM * Thu Apr 26 2018 Justin M. Forbes - 4.17.0-0.rc2.git2.1 - Linux v4.17-rc2-104-g69bfd470f462 * Wed Apr 25 2018 Peter Robinson - Add fixes for Marvell a37xx EspressoBin - Update to latest Raspberry Pi 3+ fixes - More fixes for lan78xx on the Raspberry Pi 3+ * Tue Apr 24 2018 Justin M. Forbes - 4.17.0-0.rc2.git1.1 - Linux v4.17-rc2-58-g24cac7009cb1 - Reenable debugging options. * Mon Apr 23 2018 Justin M. Forbes - 4.17.0-0.rc2.git0.1 - Linux v4.17-rc2 * Mon Apr 23 2018 Justin M. Forbes - Disable debugging options. * Sun Apr 22 2018 Peter Robinson - Add quirk patch to fix X-Gene 1 console on HP m400/Mustang (RHBZ 1531140) * Fri Apr 20 2018 Justin M. Forbes - 4.17.0-0.rc1.git3.1 - Linux v4.17-rc1-93-g43f70c960180 * Thu Apr 19 2018 Justin M. Forbes - 4.17.0-0.rc1.git2.1 - Linux v4.17-rc1-28-g87ef12027b9b * Thu Apr 19 2018 Peter Robinson - Enable UFS storage options on ARM * Wed Apr 18 2018 Justin M. Forbes - Fix rhbz 1565354 * Tue Apr 17 2018 Peter Robinson - Enable drivers for Xilinx ZYMQ-MP Ultra96 - Initial support for PocketBeagle * Tue Apr 17 2018 Justin M. Forbes - 4.17.0-0.rc1.git1.1 - Linux v4.17-rc1-21-ga27fc14219f2 - Reenable debugging options. * Mon Apr 16 2018 Justin M. Forbes - 4.17.0-0.rc1.git0.1 - Linux v4.17-rc1 - Disable debugging options. * Fri Apr 13 2018 Justin M. Forbes - 4.17.0-0.rc0.git9.1 - Linux v4.16-11958-g16e205cf42da * Thu Apr 12 2018 Justin M. Forbes - 4.17.0-0.rc0.git8.1 - Linux v4.16-11766-ge241e3f2bf97 * Thu Apr 12 2018 Peter Robinson - Patch to fix nouveau on Tegra platforms - Enable IOMMU on Exynos now upstream does - Disable tps65217-charger on BeagleBone to fix USB-OTG port rhbz 1487399 - Add fix for the BeagleBone boot failure - Further fix for ThunderX ZIP driver * Wed Apr 11 2018 Laura Abbott - Enable JFFS2 and some MTD modules (rhbz 1474493) - Enable a few infiniband options (rhbz 1291902) * Wed Apr 11 2018 Justin M. Forbes - 4.17.0-0.rc0.git7.1 - Linux v4.16-11490-gb284d4d5a678 * Tue Apr 10 2018 Justin M. Forbes - 4.17.0-0.rc0.git6.1 - Linux v4.16-10929-gc18bb396d3d2 * Mon Apr 9 2018 Peter Robinson - Fixes for Cavium ThunderX ZIP driver stability * Mon Apr 09 2018 Justin M. Forbes - 4.17.0-0.rc0.git5.1 - Linux v4.16-10608-gf8cf2f16a7c9 * Fri Apr 06 2018 Justin M. Forbes - 4.17.0-0.rc0.git4.1 - Linux v4.16-9576-g38c23685b273 * Thu Apr 05 2018 Justin M. Forbes - 4.17.0-0.rc0.git3.1 - Linux v4.16-7248-g06dd3dfeea60 * Wed Apr 04 2018 Justin M. Forbes - 4.17.0-0.rc0.git2.1 - Linux v4.16-5456-g17dec0a94915 * Tue Apr 03 2018 Justin M. Forbes - 4.17.0-0.rc0.git1.1 - Linux v4.16-2520-g642e7fd23353 - Reenable debugging options. * Mon Apr 2 2018 Peter Robinson 4.16.0-2 - Improvements for the Raspberry Pi 3+ - Fixes and minor improvements to Raspberry Pi 2/3 * Mon Apr 02 2018 Jeremy Cline - 4.16.0-1 - Linux v4.16 - Disable debugging options. ### # The following Emacs magic makes C-c C-e use UTC dates. # Local Variables: # rpm-change-log-uses-utc: t # End: ###