diff --git a/ARM-mvebu-change-order-of-ethernet-DT-nodes-on-Armada-38x.patch b/ARM-mvebu-change-order-of-ethernet-DT-nodes-on-Armada-38x.patch deleted file mode 100644 index cff3d3339..000000000 --- a/ARM-mvebu-change-order-of-ethernet-DT-nodes-on-Armada-38x.patch +++ /dev/null @@ -1,101 +0,0 @@ -From patchwork Wed Jan 27 15:08:19 2016 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: [1/2] ARM: mvebu: change order of ethernet DT nodes on Armada 38x -From: Thomas Petazzoni -X-Patchwork-Id: 8134751 -Message-Id: <1453907300-28283-2-git-send-email-thomas.petazzoni@free-electrons.com> -To: Jason Cooper , Andrew Lunn , - Sebastian Hesselbarth , - Gregory Clement -Cc: Nadav Haklai , Lior Amsalem , - Thomas Petazzoni , - linux-arm-kernel@lists.infradead.org -Date: Wed, 27 Jan 2016 16:08:19 +0100 - -On Armada 38x, the available network interfaces are: - - - port 0, at 0x70000 - - port 1, at 0x30000 - - port 2, at 0x34000 - -Due to the rule saying that DT nodes should be ordered by register -addresses, the network interfaces are probed in this order: - - - port 1, at 0x30000, which gets named eth0 - - port 2, at 0x34000, which gets named eth1 - - port 0, at 0x70000, which gets named eth2 - -(if all three ports are enabled at the board level) - -Unfortunately, the network subsystem doesn't provide any way to rename -network interfaces from the kernel (it can only be done from -userspace). So, the default naming of the network interfaces is very -confusing as it doesn't match the datasheet, nor the naming of the -interfaces in the bootloader, nor the naming of the interfaces on -labels printed on the board. - -For example, on the Armada 388 GP, the board has two ports, labelled -GE0 and GE1. One has to know that GE0 is eth1 and GE1 is eth0, which -isn't really obvious. - -In order to solve this, this patch proposes to exceptionaly violate -the rule of "order DT nodes by register address", and put the 0x70000 -node before the 0x30000 node, so that network interfaces get named in -a more natural way. - -Signed-off-by: Thomas Petazzoni - ---- -arch/arm/boot/dts/armada-38x.dtsi | 30 +++++++++++++++++++++--------- - 1 file changed, 21 insertions(+), 9 deletions(-) - -diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi -index e8b7f67..b50784d 100644 ---- a/arch/arm/boot/dts/armada-38x.dtsi -+++ b/arch/arm/boot/dts/armada-38x.dtsi -@@ -429,6 +429,27 @@ - reg = <0x22000 0x1000>; - }; - -+ /* -+ * As a special exception to the "order by -+ * register address" rule, the eth0 node is -+ * placed here to ensure that it gets -+ * registered as the first interface, since -+ * the network subsystem doesn't allow naming -+ * interfaces using DT aliases. Without this, -+ * the ordering of interfaces is different -+ * from the one used in U-Boot and the -+ * labeling of interfaces on the boards, which -+ * is very confusing for users. -+ */ -+ eth0: ethernet@70000 { -+ compatible = "marvell,armada-370-neta"; -+ reg = <0x70000 0x4000>; -+ interrupts-extended = <&mpic 8>; -+ clocks = <&gateclk 4>; -+ tx-csum-limit = <9800>; -+ status = "disabled"; -+ }; -+ - eth1: ethernet@30000 { - compatible = "marvell,armada-370-neta"; - reg = <0x30000 0x4000>; -@@ -493,15 +514,6 @@ - }; - }; - -- eth0: ethernet@70000 { -- compatible = "marvell,armada-370-neta"; -- reg = <0x70000 0x4000>; -- interrupts-extended = <&mpic 8>; -- clocks = <&gateclk 4>; -- tx-csum-limit = <9800>; -- status = "disabled"; -- }; -- - mdio: mdio@72004 { - #address-cells = <1>; - #size-cells = <0>; diff --git a/Initial-AllWinner-A64-and-PINE64-support.patch b/Initial-AllWinner-A64-and-PINE64-support.patch index 7be47d850..e9b00f70e 100644 --- a/Initial-AllWinner-A64-and-PINE64-support.patch +++ b/Initial-AllWinner-A64-and-PINE64-support.patch @@ -36,7 +36,7 @@ index bb9b0faa..8b39d2b 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.txt +++ b/Documentation/devicetree/bindings/arm/sunxi.txt @@ -13,3 +13,4 @@ using one of the following compatible strings: - allwinner,sun8i-a33 + allwinner,sun8i-a83t allwinner,sun8i-h3 allwinner,sun9i-a80 + allwinner,sun50i-a64 @@ -164,11 +164,11 @@ diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index f832b8a..3b7428a 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile -@@ -1,3 +1,4 @@ +@@ -2,3 +2,4 @@ + dts-dirs += al +dts-dirs += allwinner dts-dirs += altera dts-dirs += amd - dts-dirs += apm diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile new file mode 100644 index 0000000..1e29a5a diff --git a/config-arm-generic b/config-arm-generic index aa0ad4933..938815996 100644 --- a/config-arm-generic +++ b/config-arm-generic @@ -133,6 +133,7 @@ CONFIG_CRYPTO_DEV_ROCKCHIP=m CONFIG_ROCKCHIP_EFUSE=m CONFIG_PHY_ROCKCHIP_EMMC=m CONFIG_PHY_ROCKCHIP_DP=m +CONFIG_ROCKCHIP_MBOX=y # Tegra CONFIG_ARM_TEGRA_CPUFREQ=y diff --git a/config-arm64 b/config-arm64 index 07549aefe..2300ee161 100644 --- a/config-arm64 +++ b/config-arm64 @@ -12,17 +12,21 @@ CONFIG_ARCH_SEATTLE=y CONFIG_ARCH_SUNXI=y CONFIG_ARCH_TEGRA=y CONFIG_ARCH_XGENE=y +# CONFIG_ARCH_ALPINE is not set # CONFIG_ARCH_BCM_IPROC is not set # CONFIG_ARCH_BERLIN is not set -# CONFIG_ARCH_EXYNOS7 is not set +# CONFIG_ARCH_EXYNOS is not set # CONFIG_ARCH_FSL_LS2085A is not set # CONFIG_ARCH_LAYERSCAPE is not set # CONFIG_ARCH_MEDIATEK is not set +# CONFIG_ARCH_MESON is not set +# CONFIG_ARCH_MVEBU is not set # CONFIG_ARCH_QCOM is not set # CONFIG_ARCH_RENESAS is not set # CONFIG_ARCH_SPRD is not set # CONFIG_ARCH_STRATIX10 is not set # CONFIG_ARCH_THUNDER is not set +# CONFIG_ARCH_VULCAN is not set # CONFIG_ARCH_ZYNQMP is not set # CONFIG_ARCH_UNIPHIER is not set @@ -135,6 +139,7 @@ CONFIG_EDAC_XGENE=m CONFIG_PCI_XGENE=y CONFIG_PCI_XGENE_MSI=y CONFIG_I2C_XGENE_SLIMPRO=m +CONFIG_XGENE_SLIMPRO_MBOX=m # AMD Seattle CONFIG_NET_SB1000=y @@ -152,6 +157,7 @@ CONFIG_HISI_THERMAL=m CONFIG_STUB_CLK_HI6220=y CONFIG_PHY_HI6220_USB=m CONFIG_COMMON_RESET_HI6220=m +CONFIG_HI6220_MBOX=m # Tegra CONFIG_ARCH_TEGRA_132_SOC=y diff --git a/config-armv7-generic b/config-armv7-generic index f977acce7..b3904423c 100644 --- a/config-armv7-generic +++ b/config-armv7-generic @@ -59,6 +59,7 @@ CONFIG_ARCH_SUNXI=y CONFIG_ARCH_TEGRA=y CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA=y CONFIG_ARCH_VIRT=y +# CONFIG_ARCH_ARTPEC is not set # CONFIG_ARCH_BCM is not set # CONFIG_ARCH_BERLIN is not set # CONFIG_ARCH_HI3xxx is not set diff --git a/gitrev b/gitrev index 0622258e5..aec1ac2b9 100644 --- a/gitrev +++ b/gitrev @@ -1 +1 @@ -1e75a9f34a5ed5902707fb74b468356c55142b71 +46e595a17dcf11404f713845ecb5b06b92a94e43 diff --git a/kernel.spec b/kernel.spec index add95cd84..d3590becc 100644 --- a/kernel.spec +++ b/kernel.spec @@ -69,7 +69,7 @@ Summary: The Linux kernel # The rc snapshot level %define rcrev 0 # The git snapshot level -%define gitrev 14 +%define gitrev 15 # Set rpm version accordingly %define rpmversion 4.%{upstream_sublevel}.0 %endif @@ -510,8 +510,6 @@ Patch456: arm64-acpi-drop-expert-patch.patch # http://patchwork.ozlabs.org/patch/587554/ Patch457: ARM-tegra-usb-no-reset.patch -Patch458: ARM-mvebu-change-order-of-ethernet-DT-nodes-on-Armada-38x.patch - # http://www.spinics.net/lists/arm-kernel/msg490981.html Patch459: geekbox-v4-device-tree-support.patch @@ -2153,6 +2151,10 @@ fi # # %changelog +* Mon Mar 21 2016 Josh Boyer - 4.6.0-0.rc0.git15.1 +- Linux v4.5-9406-g46e595a17dcf +- xtensa, mailbox, vhost, all the armsoc merges + * Mon Mar 21 2016 Peter Robinson - Minor aarch64 cleanups diff --git a/sources b/sources index 5fccbcaef..c40fc87a1 100644 --- a/sources +++ b/sources @@ -1,3 +1,3 @@ a60d48eee08ec0536d5efb17ca819aef linux-4.5.tar.xz 6f557fe90b800b615c85c2ca04da6154 perf-man-4.5.tar.gz -ef7eff3ee0ad581ed63c76552b70c09f patch-4.5-git14.xz +1034b54b04263544264016c73c6ba561 patch-4.5-git15.xz