diff --git a/.gitignore b/.gitignore index 8ee6321e0..05a9df52c 100644 --- a/.gitignore +++ b/.gitignore @@ -3,5 +3,5 @@ patch-*.bz2 clog *.rpm kernel-2.6.*/ -/patch-2.6.36.1.bz2 -/patch-2.6.36.2-rc1.bz2 +/patch-2.6.37-rc5.bz2 +/patch-2.6.37-rc5-git2.bz2 diff --git a/Makefile b/Makefile index f925397d1..ca62cce42 100644 --- a/Makefile +++ b/Makefile @@ -77,12 +77,13 @@ debug: @perl -pi -e 's/# CONFIG_DEBUG_CFQ_IOSCHED is not set/CONFIG_DEBUG_CFQ_IOSCHED=y/' config-nodebug @perl -pi -e 's/# CONFIG_DRBD_FAULT_INJECTION is not set/CONFIG_DRBD_FAULT_INJECTION=y/' config-nodebug @perl -pi -e 's/# CONFIG_ATH_DEBUG is not set/CONFIG_ATH_DEBUG=y/' config-nodebug + @perl -pi -e 's/# CONFIG_CARL9170_DEBUGFS is not set/CONFIG_CARL9170_DEBUGFS=y/' config-nodebug @perl -pi -e 's/# CONFIG_IWLWIFI_DEVICE_TRACING is not set/CONFIG_IWLWIFI_DEVICE_TRACING=y/' config-nodebug @perl -pi -e 's/# CONFIG_DEBUG_OBJECTS_WORK is not set/CONFIG_DEBUG_OBJECTS_WORK=y/' config-nodebug @perl -pi -e 's/# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set/CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y/' config-nodebug @perl -pi -e 's/# CONFIG_DMADEVICES_DEBUG is not set/CONFIG_DMADEVICES_DEBUG=y/' config-nodebug @perl -pi -e 's/# CONFIG_DMADEVICES_VDEBUG is not set/CONFIG_DMADEVICES_VDEBUG=y/' config-nodebug - @perl -pi -e 's/# CONFIG_CEPH_FS_PRETTYDEBUG is not set/CONFIG_CEPH_FS_PRETTYDEBUG=y/' config-nodebug + @perl -pi -e 's/# CONFIG_CEPH_LIB_PRETTYDEBUG is not set/CONFIG_CEPH_LIB_PRETTYDEBUG=y/' config-nodebug @perl -pi -e 's/# CONFIG_QUOTA_DEBUG is not set/CONFIG_QUOTA_DEBUG=y/' config-nodebug @perl -pi -e 's/# CONFIG_KGDB_KDB is not set/CONFIG_KGDB_KDB=y/' config-nodebug @perl -pi -e 's/# CONFIG_KDB_KEYBOARD is not set/CONFIG_KDB_KEYBOARD=y/' config-nodebug @@ -90,6 +91,8 @@ debug: @perl -pi -e 's/# CONFIG_DEBUG_PER_CPU_MAPS is not set/CONFIG_DEBUG_PER_CPU_MAPS=y/' config-nodebug @perl -pi -e 's/CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y/# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set/' config-nodebug #@perl -pi -e 's/# CONFIG_PCI_DEFAULT_USE_CRS is not set/CONFIG_PCI_DEFAULT_USE_CRS=y/' config-nodebug + @perl -pi -e 's/# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set/CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y/' config-nodebug + @perl -pi -e 's/# CONFIG_TEST_LIST_SORT is not set/CONFIG_TEST_LIST_SORT=y/' config-nodebug @# just in case we're going from extremedebug -> debug @perl -pi -e 's/CONFIG_DEBUG_PAGEALLOC=y/# CONFIG_DEBUG_PAGEALLOC is not set/' config-nodebug @@ -151,12 +154,13 @@ release: @perl -pi -e 's/CONFIG_DEBUG_CFQ_IOSCHED=y/# CONFIG_DEBUG_CFQ_IOSCHED is not set/' config-nodebug @perl -pi -e 's/CONFIG_DRBD_FAULT_INJECTION=y/# CONFIG_DRBD_FAULT_INJECTION is not set/' config-nodebug @perl -pi -e 's/CONFIG_ATH_DEBUG=y/# CONFIG_ATH_DEBUG is not set/' config-nodebug + @perl -pi -e 's/CONFIG_CARL9170_DEBUGFS=y/# CONFIG_CARL9170_DEBUGFS is not set/' config-nodebug @perl -pi -e 's/CONFIG_IWLWIFI_DEVICE_TRACING=y/# CONFIG_IWLWIFI_DEVICE_TRACING is not set/' config-nodebug @perl -pi -e 's/CONFIG_DEBUG_OBJECTS_WORK=y/# CONFIG_DEBUG_OBJECTS_WORK is not set/' config-nodebug @perl -pi -e 's/CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y/# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set/' config-nodebug @perl -pi -e 's/CONFIG_DMADEVICES_DEBUG=y/# CONFIG_DMADEVICES_DEBUG is not set/' config-nodebug @perl -pi -e 's/CONFIG_DMADEVICES_VDEBUG=y/# CONFIG_DMADEVICES_VDEBUG is not set/' config-nodebug - @perl -pi -e 's/CONFIG_CEPH_FS_PRETTYDEBUG=y/# CONFIG_CEPH_FS_PRETTYDEBUG is not set/' config-nodebug + @perl -pi -e 's/CONFIG_CEPH_LIB_PRETTYDEBUG=y/# CONFIG_CEPH_LIB_PRETTYDEBUG is not set/' config-nodebug @perl -pi -e 's/CONFIG_QUOTA_DEBUG=y/# CONFIG_QUOTA_DEBUG is not set/' config-nodebug @perl -pi -e 's/CONFIG_CPU_NOTIFIER_ERROR_INJECT=m/# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set/' config-nodebug #@perl -pi -e 's/CONFIG_KGDB_KDB=y/# CONFIG_KGDB_KDB is not set/' config-nodebug @@ -164,6 +168,8 @@ release: @perl -pi -e 's/CONFIG_DEBUG_PER_CPU_MAPS=y/# CONFIG_DEBUG_PER_CPU_MAPS is not set/' config-nodebug @perl -pi -e 's/# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set/CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y/' config-nodebug #@perl -pi -e 's/CONFIG_PCI_DEFAULT_USE_CRS=y/# CONFIG_PCI_DEFAULT_USE_CRS is not set/' config-nodebug + @perl -pi -e 's/CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y/# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set/' config-nodebug + @perl -pi -e 's/CONFIG_TEST_LIST_SORT=y/# CONFIG_TEST_LIST_SORT is not set/' config-nodebug @perl -pi -e 's/CONFIG_DEBUG_PAGEALLOC=y/# CONFIG_DEBUG_PAGEALLOC is not set/' config-debug @perl -pi -e 's/CONFIG_DEBUG_PAGEALLOC=y/# CONFIG_DEBUG_PAGEALLOC is not set/' config-nodebug diff --git a/acpi-ec-add-delay-before-write.patch b/acpi-ec-add-delay-before-write.patch index af49cccbd..f1cb50817 100644 --- a/acpi-ec-add-delay-before-write.patch +++ b/acpi-ec-add-delay-before-write.patch @@ -23,7 +23,7 @@ index 27e0b92..09fbb69 100644 pr_debug(PREFIX "controller reset, restart transaction\n"); spin_lock_irqsave(&ec->curr_lock, flags); start_transaction(ec); -@@ -271,15 +272,25 @@ static int ec_check_ibf0(struct acpi_ec *ec) +@@ -271,15 +272,24 @@ static int ec_check_ibf0(struct acpi_ec *ec) return (status & ACPI_EC_FLAG_IBF) == 0; } @@ -38,8 +38,7 @@ index 27e0b92..09fbb69 100644 + static int ec_wait_ibf0(struct acpi_ec *ec) { -+ - unsigned long delay = jiffies + msecs_to_jiffies(ACPI_EC_DELAY); + unsigned long delay = jiffies + msecs_to_jiffies(ec_delay); /* interrupt wait manually if GPE mode is not active */ while (time_before(jiffies, delay)) if (wait_event_timeout(ec->wait, ec_check_ibf0(ec), diff --git a/acpi-update-battery-information-on-notification-0x81.patch b/acpi-update-battery-information-on-notification-0x81.patch index 3a8d619ce..3704b054d 100644 --- a/acpi-update-battery-information-on-notification-0x81.patch +++ b/acpi-update-battery-information-on-notification-0x81.patch @@ -56,9 +56,9 @@ index 95649d3..2a774a8 100644 } @@ -914,7 +923,8 @@ static void acpi_battery_notify(struct acpi_device *device, u32 event) - #ifdef CONFIG_ACPI_SYSFS_POWER + if (!battery) + return; old = battery->bat.dev; - #endif - acpi_battery_update(battery); + acpi_battery_update(battery, (event == ACPI_BATTERY_NOTIFY_INFO ? true + : false)); diff --git a/add-macbookair3-ids.patch b/add-macbookair3-ids.patch deleted file mode 100644 index b512eeaa2..000000000 --- a/add-macbookair3-ids.patch +++ /dev/null @@ -1,264 +0,0 @@ -diff -uNrp kernel-2.6.35.fc14.orig/drivers/bluetooth/btusb.c kernel-2.6.35.fc14.new/drivers/bluetooth/btusb.c ---- kernel-2.6.35.fc14.orig/drivers/bluetooth/btusb.c 2010-11-12 12:35:49.390791080 +0100 -+++ kernel-2.6.35.fc14.new/drivers/bluetooth/btusb.c 2010-11-12 12:48:22.090611963 +0100 -@@ -68,6 +68,9 @@ static struct usb_device_id btusb_table[ - /* Apple MacBookPro6,2 */ - { USB_DEVICE(0x05ac, 0x8218) }, - -+ /* Apple MacBookAir3,1, MacBookAir3,2 */ -+ { USB_DEVICE(0x05ac, 0x821b) }, -+ - /* AVM BlueFRITZ! USB v2.0 */ - { USB_DEVICE(0x057c, 0x3800) }, - -diff -uNrp kernel-2.6.35.fc14.orig/drivers/hid/hid-apple.c kernel-2.6.35.fc14.new/drivers/hid/hid-apple.c ---- kernel-2.6.35.fc14.orig/drivers/hid/hid-apple.c 2010-11-12 12:35:49.153805968 +0100 -+++ kernel-2.6.35.fc14.new/drivers/hid/hid-apple.c 2010-11-12 12:48:35.689816431 +0100 -@@ -59,6 +59,27 @@ struct apple_key_translation { - u8 flags; - }; - -+static const struct apple_key_translation macbookair_fn_keys[] = { -+ { KEY_BACKSPACE, KEY_DELETE }, -+ { KEY_ENTER, KEY_INSERT }, -+ { KEY_F1, KEY_BRIGHTNESSDOWN, APPLE_FLAG_FKEY }, -+ { KEY_F2, KEY_BRIGHTNESSUP, APPLE_FLAG_FKEY }, -+ { KEY_F3, KEY_SCALE, APPLE_FLAG_FKEY }, -+ { KEY_F4, KEY_DASHBOARD, APPLE_FLAG_FKEY }, -+ { KEY_F6, KEY_PREVIOUSSONG, APPLE_FLAG_FKEY }, -+ { KEY_F7, KEY_PLAYPAUSE, APPLE_FLAG_FKEY }, -+ { KEY_F8, KEY_NEXTSONG, APPLE_FLAG_FKEY }, -+ { KEY_F9, KEY_MUTE, APPLE_FLAG_FKEY }, -+ { KEY_F10, KEY_VOLUMEDOWN, APPLE_FLAG_FKEY }, -+ { KEY_F11, KEY_VOLUMEUP, APPLE_FLAG_FKEY }, -+ { KEY_F12, KEY_EJECTCD, APPLE_FLAG_FKEY }, -+ { KEY_UP, KEY_PAGEUP }, -+ { KEY_DOWN, KEY_PAGEDOWN }, -+ { KEY_LEFT, KEY_HOME }, -+ { KEY_RIGHT, KEY_END }, -+ { } -+}; -+ - static const struct apple_key_translation apple_fn_keys[] = { - { KEY_BACKSPACE, KEY_DELETE }, - { KEY_ENTER, KEY_INSERT }, -@@ -157,10 +178,14 @@ static int hidinput_apple_event(struct h - if (fnmode) { - int do_translate; - -- trans = apple_find_translation((hid->product < 0x21d || -+ if(hid->product >= 0x023f && hid->product <= 0x0244 ) { -+ trans = apple_find_translation(macbookair_fn_keys, usage->code); -+ } else { -+ trans = apple_find_translation((hid->product < 0x21d || - hid->product >= 0x300) ? - powerbook_fn_keys : apple_fn_keys, - usage->code); -+ } - if (trans) { - if (test_bit(usage->code, asc->pressed_fn)) - do_translate = 1; -@@ -435,6 +460,18 @@ static const struct hid_device_id apple_ - .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS), - .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS }, -+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI), -+ .driver_data = APPLE_HAS_FN }, -+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4_ISO), -+ .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD }, -+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4_JIS), -+ .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS }, -+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI), -+ .driver_data = APPLE_HAS_FN }, -+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO), -+ .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD }, -+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS), -+ .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS }, - { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI), - .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, - { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO), -diff -uNrp kernel-2.6.35.fc14.orig/drivers/hid/hid-core.c kernel-2.6.35.fc14.new/drivers/hid/hid-core.c ---- kernel-2.6.35.fc14.orig/drivers/hid/hid-core.c 2010-11-12 12:35:49.153805968 +0100 -+++ kernel-2.6.35.fc14.new/drivers/hid/hid-core.c 2010-11-12 12:48:35.690816373 +0100 -@@ -1273,6 +1273,12 @@ static const struct hid_device_id hid_bl - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI) }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO) }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS) }, -+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI) }, -+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4_ISO) }, -+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4_JIS) }, -+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI) }, -+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO) }, -+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS) }, - { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) }, - { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) }, - { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) }, -@@ -1738,6 +1744,12 @@ static const struct hid_device_id hid_mo - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI) }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO) }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS) }, -+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI) }, -+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4_ISO) }, -+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4_JIS) }, -+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI) }, -+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO) }, -+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS) }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) }, - { } -diff -uNrp kernel-2.6.35.fc14.orig/drivers/hid/hid-ids.h kernel-2.6.35.fc14.new/drivers/hid/hid-ids.h ---- kernel-2.6.35.fc14.orig/drivers/hid/hid-ids.h 2010-11-12 12:35:49.153805968 +0100 -+++ kernel-2.6.35.fc14.new/drivers/hid/hid-ids.h 2010-11-12 12:48:35.691816314 +0100 -@@ -93,6 +93,12 @@ - #define USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI 0x0236 - #define USB_DEVICE_ID_APPLE_WELLSPRING3_ISO 0x0237 - #define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS 0x0238 -+#define USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI 0x023f -+#define USB_DEVICE_ID_APPLE_WELLSPRING4_ISO 0x0240 -+#define USB_DEVICE_ID_APPLE_WELLSPRING4_JIS 0x0241 -+#define USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI 0x0242 -+#define USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO 0x0243 -+#define USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS 0x0244 - #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI 0x0239 - #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO 0x023a - #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS 0x023b -diff -uNrp kernel-2.6.35.fc14.orig/drivers/hwmon/applesmc.c kernel-2.6.35.fc14.new/drivers/hwmon/applesmc.c ---- kernel-2.6.35.fc14.orig/drivers/hwmon/applesmc.c 2010-11-12 12:35:49.618776754 +0100 -+++ kernel-2.6.35.fc14.new/drivers/hwmon/applesmc.c 2010-11-13 12:25:05.810472278 +0100 -@@ -162,6 +162,10 @@ static const char *temperature_sensors_s - /* Set 22: MacBook Pro 7,1 */ - { "TB0T", "TB1T", "TB2T", "TC0D", "TC0P", "TN0D", "TN0P", "TN0S", - "TN1D", "TN1F", "TN1G", "TN1S", "Th1H", "Ts0P", "Ts0S", NULL }, -+/* Set 23: MacBook Air 3,1 */ -+ { "TB0T", "TB1T", "TB2T", "TC0D", "TC0E", "TC0P", "TC1E", "TCZ3", -+ "TCZ4", "TCZ5", "TG0E", "TG1E", "TG2E", "TGZ3", "TGZ4", "TGZ5", -+ "TH0F", "TH0O", "TM0P" }, - }; - - /* List of keys used to read/write fan speeds */ -@@ -1524,11 +1528,21 @@ static __initdata struct dmi_match_data - { .accelerometer = 1, .light = 1, .temperature_set = 21 }, - /* MacBook Pro 7,1: accelerometer, backlight and temperature set 22 */ - { .accelerometer = 1, .light = 1, .temperature_set = 22 }, -+/* MacBook Air 3,1: accelerometer, backlight and temperature set 15 */ -+ { .accelerometer = 0, .light = 0, .temperature_set = 23 }, - }; - - /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1". - * So we need to put "Apple MacBook Pro" before "Apple MacBook". */ - static __initdata struct dmi_system_id applesmc_whitelist[] = { -+ { applesmc_dmi_match, "Apple MacBook Air 3", { -+ DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), -+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir3,2") }, -+ &applesmc_dmi_data[23]}, -+ { applesmc_dmi_match, "Apple MacBook Air 3", { -+ DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), -+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir3,1") }, -+ &applesmc_dmi_data[23]}, - { applesmc_dmi_match, "Apple MacBook Air 2", { - DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), - DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir2") }, -diff -uNrp kernel-2.6.35.fc14.orig/drivers/input/mouse/bcm5974.c kernel-2.6.35.fc14.new/drivers/input/mouse/bcm5974.c ---- kernel-2.6.35.fc14.orig/drivers/input/mouse/bcm5974.c 2010-11-12 12:35:50.004752503 +0100 -+++ kernel-2.6.35.fc14.new/drivers/input/mouse/bcm5974.c 2010-11-12 12:48:13.140136374 +0100 -@@ -55,6 +55,14 @@ - #define USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI 0x0236 - #define USB_DEVICE_ID_APPLE_WELLSPRING3_ISO 0x0237 - #define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS 0x0238 -+/* MacbookAir3,2 (unibody), aka wellspring5 */ -+#define USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI 0x023f -+#define USB_DEVICE_ID_APPLE_WELLSPRING4_ISO 0x0240 -+#define USB_DEVICE_ID_APPLE_WELLSPRING4_JIS 0x0241 -+/* MacbookAir3,1 (unibody), aka wellspring4 */ -+#define USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI 0x0242 -+#define USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO 0x0243 -+#define USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS 0x0244 - - #define BCM5974_DEVICE(prod) { \ - .match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \ -@@ -80,6 +88,14 @@ static const struct usb_device_id bcm597 - BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI), - BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ISO), - BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_JIS), -+ /* MacbookAir3,2 */ -+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI), -+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4_ISO), -+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4_JIS), -+ /* MacbookAir3,1 */ -+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI), -+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO), -+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS), - /* Terminating entry */ - {} - }; -@@ -234,6 +250,30 @@ static const struct bcm5974_config bcm59 - { DIM_X, DIM_X / SN_COORD, -4460, 5166 }, - { DIM_Y, DIM_Y / SN_COORD, -75, 6700 } - }, -+ { -+ USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI, -+ USB_DEVICE_ID_APPLE_WELLSPRING4_ISO, -+ USB_DEVICE_ID_APPLE_WELLSPRING4_JIS, -+ HAS_INTEGRATED_BUTTON, -+ 0x84, sizeof(struct bt_data), -+ 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, -+ { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 }, -+ { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, -+ { DIM_X, DIM_X / SN_COORD, -4460, 5166 }, -+ { DIM_Y, DIM_Y / SN_COORD, -75, 6700 } -+ }, -+ { -+ USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI, -+ USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO, -+ USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS, -+ HAS_INTEGRATED_BUTTON, -+ 0x84, sizeof(struct bt_data), -+ 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, -+ { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 }, -+ { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, -+ { DIM_X, DIM_X / SN_COORD, -4460, 5166 }, -+ { DIM_Y, DIM_Y / SN_COORD, -75, 6700 } -+ }, - {} - }; - -diff -uNrp kernel-2.6.35.fc14.orig/drivers/video/backlight/mbp_nvidia_bl.c kernel-2.6.35.fc14.new/drivers/video/backlight/mbp_nvidia_bl.c ---- kernel-2.6.35.fc14.orig/drivers/video/backlight/mbp_nvidia_bl.c 2010-11-12 12:35:49.159805591 +0100 -+++ kernel-2.6.35.fc14.new/drivers/video/backlight/mbp_nvidia_bl.c 2010-11-12 12:48:47.412131884 +0100 -@@ -335,6 +335,24 @@ static const struct dmi_system_id __init - }, - .driver_data = (void *)&nvidia_chipset_data, - }, -+ { -+ .callback = mbp_dmi_match, -+ .ident = "MacBookAir 3,1", -+ .matches = { -+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), -+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir3,1"), -+ }, -+ .driver_data = (void *)&nvidia_chipset_data, -+ }, -+ { -+ .callback = mbp_dmi_match, -+ .ident = "MacBookAir 3,2", -+ .matches = { -+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), -+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir3,2"), -+ }, -+ .driver_data = (void *)&nvidia_chipset_data, -+ }, - { } - }; - -diff -uNrp kernel-2.6.35.fc14.orig/sound/pci/hda/patch_cirrus.c kernel-2.6.35.fc14.new/sound/pci/hda/patch_cirrus.c ---- kernel-2.6.35.fc14.orig/sound/pci/hda/patch_cirrus.c 2010-11-12 12:35:49.005815268 +0100 -+++ kernel-2.6.35.fc14.new/sound/pci/hda/patch_cirrus.c 2010-11-12 12:48:40.379542432 +0100 -@@ -1139,6 +1139,8 @@ static const char *cs420x_models[CS420X_ - static struct snd_pci_quirk cs420x_cfg_tbl[] = { - SND_PCI_QUIRK(0x10de, 0xcb79, "MacBookPro 5,5", CS420X_MBP55), - SND_PCI_QUIRK(0x8086, 0x7270, "IMac 27 Inch", CS420X_IMAC27), -+ SND_PCI_QUIRK(0x10de, 0xcb89, "MacBookAir 3,1", CS420X_MBP55), -+ SND_PCI_QUIRK(0x10de, 0x0d94, "MacBookAir 3,1(2)", CS420X_MBP55), - {} /* terminator */ - }; - diff --git a/btusb-macbookpro-6-2.patch b/btusb-macbookpro-6-2.patch deleted file mode 100644 index d65a30960..000000000 --- a/btusb-macbookpro-6-2.patch +++ /dev/null @@ -1,41 +0,0 @@ -From kernel-bounces@lists.fedoraproject.org Fri Sep 17 17:09:15 2010 -From: Will Woods -To: Marcel Holtmann -Subject: [PATCH 2/2] bluetooth: add support for controller in MacBookPro6,2 -Date: Fri, 17 Sep 2010 17:09:21 -0400 - -Once again the device class is ff(vend.) instead of e0(wlcon). - -output from 'usb-devices': -T: Bus=01 Lev=03 Prnt=03 Port=02 Cnt=03 Dev#= 8 Spd=12 MxCh= 0 -D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 -P: Vendor=05ac ProdID=8218 Rev=00.22 -S: Manufacturer=Apple Inc. -S: Product=Bluetooth USB Host Controller -C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA -I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) -I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) -I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) -I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) - -Signed-off-by: Will Woods ---- - drivers/bluetooth/btusb.c | 3 +++ - 1 files changed, 3 insertions(+), 0 deletions(-) - -diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c -index eac44e4..320e798 100644 ---- a/drivers/bluetooth/btusb.c -+++ b/drivers/bluetooth/btusb.c -@@ -65,6 +65,9 @@ static struct usb_device_id btusb_table[] = { - /* Apple iMac11,1 */ - { USB_DEVICE(0x05ac, 0x8215) }, - -+ /* Apple MacBookPro6,2 */ -+ { USB_DEVICE(0x05ac, 0x8218) }, -+ - /* AVM BlueFRITZ! USB v2.0 */ - { USB_DEVICE(0x057c, 0x3800) }, - --- -1.7.2.3 diff --git a/btusb-macbookpro-7-1.patch b/btusb-macbookpro-7-1.patch deleted file mode 100644 index 3e07dd583..000000000 --- a/btusb-macbookpro-7-1.patch +++ /dev/null @@ -1,42 +0,0 @@ -From kernel-bounces@lists.fedoraproject.org Fri Sep 17 17:09:18 2010 -From: Will Woods -To: Marcel Holtmann -Subject: [PATCH 1/2] bluetooth: add support for controller in MacBookPro7,1 -Date: Fri, 17 Sep 2010 17:09:20 -0400 - -As with iMac11,1 the device class is ff(vend.) instead of e0(wlcon). - -output from 'usb-devices': -T: Bus=04 Lev=02 Prnt=04 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 -D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 -P: Vendor=05ac ProdID=8213 Rev=01.86 -S: Manufacturer=Apple Inc. -S: Product=Bluetooth USB Host Controller -S: SerialNumber=58B0359C28ED -C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA -I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb -I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb -I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) -I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none) - -Signed-off-by: Will Woods ---- - drivers/bluetooth/btusb.c | 3 +++ - 1 files changed, 3 insertions(+), 0 deletions(-) - -diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c -index d22ce3c..eac44e4 100644 ---- a/drivers/bluetooth/btusb.c -+++ b/drivers/bluetooth/btusb.c -@@ -59,6 +59,9 @@ static struct usb_device_id btusb_table[] = { - /* Generic Bluetooth USB device */ - { USB_DEVICE_INFO(0xe0, 0x01, 0x01) }, - -+ /* Apple MacBookPro7,1 */ -+ { USB_DEVICE(0x05ac, 0x8213) }, -+ - /* Apple iMac11,1 */ - { USB_DEVICE(0x05ac, 0x8215) }, - --- -1.7.2.3 diff --git a/config-arm b/config-arm index 8d7e46a49..22335ef40 100644 --- a/config-arm +++ b/config-arm @@ -122,3 +122,10 @@ CONFIG_AUTO_ZRELADDR=y # CONFIG_DEPRECATED_PARAM_STRUCT is not set # CONFIG_ARM_SP805_WATCHDOG is not set + +CONFIG_PM_OPP=y + +CONFIG_SECCOMP=y +CONFIG_STRICT_DEVMEM=y + +# CONFIG_AMBA_PL08X is not set diff --git a/config-debug b/config-debug index 441445364..5366a8461 100644 --- a/config-debug +++ b/config-debug @@ -74,6 +74,7 @@ CONFIG_DEBUG_CFQ_IOSCHED=y CONFIG_DRBD_FAULT_INJECTION=y CONFIG_ATH_DEBUG=y +CONFIG_CARL9170_DEBUGFS=y CONFIG_IWLWIFI_DEVICE_TRACING=y CONFIG_DEBUG_OBJECTS_WORK=y @@ -84,7 +85,7 @@ CONFIG_DMADEVICES_VDEBUG=y CONFIG_PM_ADVANCED_DEBUG=y -CONFIG_CEPH_FS_PRETTYDEBUG=y +CONFIG_CEPH_LIB_PRETTYDEBUG=y CONFIG_QUOTA_DEBUG=y # CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set @@ -93,3 +94,6 @@ CONFIG_PCI_DEFAULT_USE_CRS=y CONFIG_KGDB_KDB=y CONFIG_KDB_KEYBOARD=y + +CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y +CONFIG_TEST_LIST_SORT=y diff --git a/config-generic b/config-generic index 28597be1f..f12c7c7d9 100644 --- a/config-generic +++ b/config-generic @@ -119,12 +119,13 @@ CONFIG_PCMCIA_IOCTL=y CONFIG_PCCARD=y CONFIG_MMC=m -CONFIG_MMC_BLOCK_BOUNCE=y CONFIG_SDIO_UART=m # CONFIG_MMC_TEST is not set # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set CONFIG_MMC_BLOCK=m +CONFIG_MMC_BLOCK_MINORS=8 +CONFIG_MMC_BLOCK_BOUNCE=y CONFIG_MMC_SDHCI=m CONFIG_MMC_SDHCI_PCI=m CONFIG_MMC_SDRICOH_CS=m @@ -134,6 +135,7 @@ CONFIG_MMC_VIA_SDMMC=m CONFIG_MMC_SDHCI_PLTFM=m CONFIG_MMC_CB710=m CONFIG_MMC_RICOH_MMC=y +CONFIG_MMC_USHC=m CONFIG_CB710_CORE=m # CONFIG_CB710_DEBUG is not set @@ -154,6 +156,7 @@ CONFIG_INFINIBAND_AMSO1100=m # CONFIG_INFINIBAND_AMSO1100_DEBUG is not set CONFIG_INFINIBAND_CXGB3=m CONFIG_INFINIBAND_CXGB4=m +CONFIG_SCSI_CXGB4_ISCSI=m # CONFIG_INFINIBAND_CXGB3_DEBUG is not set CONFIG_MLX4_INFINIBAND=m CONFIG_INFINIBAND_NES=m @@ -365,6 +368,7 @@ CONFIG_BLK_DEV_DELKIN=m CONFIG_LBDAF=y CONFIG_BLK_DEV_BSG=y CONFIG_BLK_DEV_INTEGRITY=y +CONFIG_BLK_DEV_THROTTLING=y # @@ -759,6 +763,7 @@ CONFIG_IP_ROUTE_VERBOSE=y CONFIG_IP_NF_SECURITY=m # CONFIG_IP_PNP is not set CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_NET_IPGRE_BROADCAST=y CONFIG_IP_MROUTE=y @@ -797,6 +802,7 @@ CONFIG_IP_VS_SH=m CONFIG_IP_VS_SED=m CONFIG_IP_VS_NQ=m CONFIG_IP_VS_FTP=m +CONFIG_IP_VS_PE_SIP=m CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y @@ -1100,6 +1106,7 @@ CONFIG_NET_ACT_NAT=m CONFIG_NET_ACT_PEDIT=m CONFIG_NET_ACT_POLICE=m CONFIG_NET_ACT_SIMP=m +CONFIG_NET_ACT_CSUM=m CONFIG_DCB=y @@ -1150,6 +1157,7 @@ CONFIG_ATM_FORE200E_TX_RETRY=16 CONFIG_ATM_FORE200E_DEBUG=0 CONFIG_ATM_HE=m +CONFIG_PPTP=m CONFIG_PPPOATM=m CONFIG_PPPOL2TP=m CONFIG_ATM_NICSTAR=m @@ -1195,6 +1203,7 @@ CONFIG_FIXED_PHY=y CONFIG_MDIO_BITBANG=m CONFIG_NATIONAL_PHY=m CONFIG_ICPLUS_PHY=m +CONFIG_BCM63XX_PHY=m CONFIG_LSI_ET1011C_PHY=m CONFIG_LXT_PHY=m CONFIG_MARVELL_PHY=m @@ -1212,6 +1221,12 @@ CONFIG_NET_VENDOR_3COM=y CONFIG_VORTEX=m CONFIG_TYPHOON=m CONFIG_DNET=m +CONFIG_STMMAC_ETH=m +# CONFIG_STMMAC_DA is not set +# CONFIG_STMMAC_DUAL_MAC is not set +# CONFIG_STMMAC_TIMER is not set + +# CONFIG_PCH_GBE is not set # # Tulip family network device support @@ -1329,6 +1344,7 @@ CONFIG_MLX4_EN=m # CONFIG_MLX4_DEBUG is not set CONFIG_QLCNIC=m CONFIG_QLGE=m +CONFIG_BNA=m CONFIG_SFC=m CONFIG_SFC_MTD=y CONFIG_BE2NET=m @@ -1408,6 +1424,9 @@ CONFIG_ATH9K=m CONFIG_ATH9K_DEBUGFS=y CONFIG_ATH9K_HTC=m # CONFIG_ATH9K_HTC_DEBUGFS is not set +CONFIG_ATH9K_RATE_CONTROL=y +CONFIG_CARL9170=m +CONFIG_CARL9170_LEDS=y CONFIG_AT76C50X_USB=m CONFIG_AIRO=m CONFIG_AIRO_CS=m @@ -1415,11 +1434,11 @@ CONFIG_ATMEL=m CONFIG_B43=m CONFIG_B43_PCMCIA=y CONFIG_B43_SDIO=y -# CONFIG_B43_DEBUG is not set +CONFIG_B43_DEBUG=y CONFIG_B43_PHY_LP=y # CONFIG_B43_FORCE_PIO is not set CONFIG_B43LEGACY=m -# CONFIG_B43LEGACY_DEBUG is not set +CONFIG_B43LEGACY_DEBUG=y CONFIG_B43LEGACY_DMA=y CONFIG_B43LEGACY_PIO=y CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y @@ -1462,6 +1481,7 @@ CONFIG_IWL4965=y CONFIG_IWL5000=y CONFIG_IWL3945=m CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y +# CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE is not set CONFIG_IWM=m # CONFIG_IWM_DEBUG is not set # CONFIG_IWM_TRACING is not set @@ -1562,6 +1582,8 @@ CONFIG_CAN_EMS_USB=m CONFIG_CAN_ESD_USB2=m CONFIG_CAN_KVASER_PCI=m CONFIG_CAN_PLX_PCI=m +CONFIG_CAN_TSCAN1=m +CONFIG_PCH_CAN=m CONFIG_NETROM=m CONFIG_ROSE=m CONFIG_MKISS=m @@ -1800,6 +1822,7 @@ CONFIG_INPUT_TABLET=y CONFIG_TABLET_USB_ACECAD=m CONFIG_TABLET_USB_AIPTEK=m CONFIG_TABLET_USB_GTCO=m +CONFIG_TABLET_USB_HANWANG=m CONFIG_TABLET_USB_KBTAB=m CONFIG_TABLET_USB_WACOM=m @@ -1823,6 +1846,7 @@ CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y CONFIG_SERIO_RAW=m CONFIG_SERIO_ALTERA_PS2=m +# CONFIG_SERIO_PS2MULT is not set # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set @@ -1916,6 +1940,7 @@ CONFIG_TOUCHSCREEN_USB_E2I=y CONFIG_TOUCHSCREEN_USB_COMPOSITE=m # CONFIG_TOUCHSCREEN_WM97XX is not set CONFIG_TOUCHSCREEN_W90X900=m +# CONFIG_TOUCHSCREEN_BU21013 is not set CONFIG_INPUT_MISC=y CONFIG_INPUT_PCSPKR=m @@ -2041,6 +2066,7 @@ CONFIG_I2C_ALGOPCA=m # CONFIG_I2C_I801 is not set # CONFIG_I2C_ISCH is not set # CONFIG_I2C_NFORCE2_S4985 is not set +# CONFIG_I2C_INTEL_MID is not set CONFIG_EEPROM_AT24=m CONFIG_EEPROM_LEGACY=m @@ -2135,6 +2161,11 @@ CONFIG_SENSORS_SMSC47M192=m CONFIG_SENSORS_SMSC47B397=m CONFIG_SENSORS_THMC50=m CONFIG_SENSORS_TMP401=m +CONFIG_APDS9802ALS=m +CONFIG_ISL29020=m +CONFIG_ISL29003=m +CONFIG_SENSORS_BH1770=m +CONFIG_SENSORS_APDS990X=m CONFIG_SENSORS_TSL2550=m CONFIG_SENSORS_VIA686A=m CONFIG_SENSORS_VIA_CPUTEMP=m @@ -2159,13 +2190,18 @@ CONFIG_SENSORS_ADT7411=m CONFIG_SENSORS_ASC7621=m CONFIG_SENSORS_EMC1403=m CONFIG_SENSORS_TMP102=m +CONFIG_SENSORS_LTC4261=m # CONFIG_SENSORS_BH1780 is not set # CONFIG_SENSORS_JC42 is not set # CONFIG_SENSORS_SMM665 is not set # CONFIG_SENSORS_EMC2103 is not set +# CONFIG_SENSORS_GPIO_FAN is not set +CONFIG_SENSORS_W83795=m +# CONFIG_SENSORS_W83795_FANCTRL is not set # CONFIG_HMC6352 is not set # CONFIG_BMP085 is not set +# CONFIG_PCH_PHUB is not set CONFIG_W1=m CONFIG_W1_CON=y @@ -2304,6 +2340,7 @@ CONFIG_AGP_VIA=y CONFIG_AGP_EFFICEON=y CONFIG_VGA_ARB=y CONFIG_VGA_ARB_MAX_GPUS=16 +CONFIG_STUB_POULSBO=m CONFIG_DRM=m CONFIG_DRM_TDFX=m CONFIG_DRM_R128=m @@ -2362,7 +2399,8 @@ CONFIG_VIDEO_AU0828=m CONFIG_VIDEO_BT848=m CONFIG_VIDEO_BT848_DVB=y CONFIG_VIDEO_BWQCAM=m -# CONFIG_VIDEO_CAFE_CCIC is not set +CONFIG_VIDEO_SR030PC30=m +CONFIG_VIDEO_CAFE_CCIC=m # CONFIG_VIDEO_CPIA is not set CONFIG_VIDEO_CPIA2=m CONFIG_VIDEO_CQCAM=m @@ -2394,6 +2432,7 @@ CONFIG_VIDEO_SAA6588=m CONFIG_VIDEO_SAA7134=m CONFIG_VIDEO_SAA7134_ALSA=m CONFIG_VIDEO_SAA7134_DVB=m +CONFIG_VIDEO_SAA7134_RC=y CONFIG_VIDEO_STRADIS=m CONFIG_VIDEO_USBVISION=m CONFIG_VIDEO_W9966=m @@ -2436,6 +2475,7 @@ CONFIG_MEDIA_TUNER_MXL5005S=m CONFIG_MEDIA_TUNER_MXL5007T=m CONFIG_MEDIA_TUNER_MC44S803=m CONFIG_MEDIA_TUNER_MAX2165=m +CONFIG_MEDIA_TUNER_TDA18218=m # # Digital Video Broadcasting Devices @@ -2475,6 +2515,8 @@ CONFIG_DVB_SP8870=m CONFIG_DVB_SP887X=m CONFIG_DVB_CX22700=m CONFIG_DVB_CX22702=m +CONFIG_DVB_S5H1432=m +CONFIG_DVB_IX2505V=m CONFIG_DVB_L64781=m CONFIG_DVB_NXT6000=m CONFIG_DVB_MT352=m @@ -2579,6 +2621,7 @@ CONFIG_DVB_USB_UMT_010=m CONFIG_DVB_USB_VP702X=m CONFIG_DVB_USB_VP7045=m CONFIG_DVB_USB_AZ6027=m +CONFIG_DVB_USB_LME2510=m CONFIG_DVB_PT1=m @@ -2600,9 +2643,11 @@ CONFIG_IR_RC5_DECODER=m CONFIG_IR_RC6_DECODER=m CONFIG_IR_JVC_DECODER=m CONFIG_IR_SONY_DECODER=m +CONFIG_IR_RC5_SZ_DECODER=m CONFIG_IR_LIRC_CODEC=m CONFIG_IR_IMON=m CONFIG_IR_MCEUSB=m +CONFIG_IR_NUVOTON=m CONFIG_V4L_MEM2MEM_DRIVERS=y # CONFIG_VIDEO_MEM2MEM_TESTDEV is not set @@ -2747,6 +2792,7 @@ CONFIG_SND_DYNAMIC_MINORS=y # Generic devices # CONFIG_SND_DUMMY=m +CONFIG_SND_ALOOP=m CONFIG_SND_VIRMIDI=m CONFIG_SND_MTPAV=m CONFIG_SND_MTS64=m @@ -2765,6 +2811,8 @@ CONFIG_SND_AD1889=m # CONFIG_SND_WAVEFRONT is not set # CONFIG_SND_MSND_PINNACLE is not set # CONFIG_SND_MSND_CLASSIC is not set +# CONFIG_SND_AZT1605 is not set +# CONFIG_SND_AZT2316 is not set # # PCI devices @@ -2819,6 +2867,7 @@ CONFIG_SND_HDA_CODEC_CMEDIA=y CONFIG_SND_HDA_CODEC_INTELHDMI=y CONFIG_SND_HDA_CODEC_SI3054=y CONFIG_SND_HDA_CODEC_NVHDMI=y +CONFIG_SND_HDA_CODEC_HDMI=y CONFIG_SND_HDA_GENERIC=y CONFIG_SND_HDA_POWER_SAVE=y CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 @@ -2936,6 +2985,8 @@ CONFIG_USB_STORAGE_ONETOUCH=y CONFIG_USB_STORAGE_ALAUDA=y CONFIG_USB_STORAGE_KARMA=y # CONFIG_USB_LIBUSUAL is not set +CONFIG_USB_UAS=m + # # USB Human Interface Devices (HID) @@ -2949,6 +3000,7 @@ CONFIG_HID=m CONFIG_HIDRAW=y CONFIG_HID_PID=y CONFIG_LOGITECH_FF=y +CONFIG_LOGIWII_FF=y CONFIG_LOGIRUMBLEPAD2_FF=y CONFIG_PANTHERLORD_FF=y CONFIG_THRUSTMASTER_FF=y @@ -2990,7 +3042,9 @@ CONFIG_HID_ZEROPLUS=m CONFIG_HID_ZYDACRON=m CONFIG_HID_ACRUX_FF=m CONFIG_HID_ELECOM=m - +CONFIG_HID_UCLOGIC=m +CONFIG_HID_WALTOP=m +CONFIG_HID_ROCCAT_PYRA=m # # USB Imaging devices @@ -3045,6 +3099,8 @@ CONFIG_USB_GSPCA_PAC7302=m CONFIG_USB_GSPCA_STV0680=m CONFIG_USB_GL860=m CONFIG_USB_GSPCA_JEILINJ=m +CONFIG_USB_GSPCA_KONICA=m +CONFIG_USB_GSPCA_XIRLINK_CIT=m CONFIG_USB_GSPCA_SPCA1528=m CONFIG_USB_GSPCA_SQ930X=m @@ -3069,6 +3125,8 @@ CONFIG_SOC_CAMERA_OV772X=m CONFIG_SOC_CAMERA_MT9T112=m CONFIG_SOC_CAMERA_RJ54N1=m CONFIG_SOC_CAMERA_OV9640=m +CONFIG_SOC_CAMERA_OV6650=m +CONFIG_SOC_CAMERA_IMX074=m # # USB Network adaptors @@ -3091,6 +3149,7 @@ CONFIG_USB_NET_RNDIS_HOST=m CONFIG_USB_NET_CDC_SUBSET=m CONFIG_USB_NET_CDC_EEM=m CONFIG_USB_NET_ZAURUS=m +CONFIG_USB_NET_CX82310_ETH=m CONFIG_USB_NET_INT51X1=m CONFIG_USB_CDC_PHONET=m CONFIG_USB_IPHETH=m @@ -3183,6 +3242,7 @@ CONFIG_USB_SERIAL_QCAUX=m CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m CONFIG_USB_SERIAL_DEBUG=m CONFIG_USB_SERIAL_SSU100=m +CONFIG_USB_SERIAL_SAMBA=m CONFIG_USB_EZUSB=y CONFIG_USB_EMI62=m @@ -3216,6 +3276,7 @@ CONFIG_USB_FILE_STORAGE=m # CONFIG_USB_OXU210HP_HCD is not set CONFIG_USB_IOWARRIOR=m CONFIG_USB_ISIGHTFW=m +CONFIG_USB_YUREX=m CONFIG_USB_VST=m CONFIG_USB_LCD=m CONFIG_USB_LD=m @@ -3270,6 +3331,7 @@ CONFIG_RTC_DRV_DS3232=m CONFIG_RTC_DRV_ISL12022=m CONFIG_MFD_SUPPORT=y +CONFIG_MFD_VX855=m CONFIG_MFD_SM501=m CONFIG_MFD_SM501_GPIO=y # CONFIG_MFD_TC6393XB is not set @@ -3290,6 +3352,7 @@ CONFIG_MFD_WM8400=m # CONFIG_ABX500_CORE is not set # CONFIG_MFD_RDC321X is not set # CONFIG_MFD_JANZ_CMODIO is not set +# CONFIG_MFD_WM831X_I2C is not set # # File systems @@ -3348,6 +3411,8 @@ CONFIG_EXOFS_FS=m CONFIG_NILFS2_FS=m CONFIG_LOGFS=m CONFIG_CEPH_FS=m +CONFIG_BLK_DEV_RBD=m +CONFIG_CEPH_LIB=m CONFIG_FSCACHE=m CONFIG_FSCACHE_STATS=y @@ -3424,6 +3489,7 @@ CONFIG_UFS_FS=m # CONFIG_UFS_DEBUG is not set CONFIG_9P_FS=m CONFIG_9P_FSCACHE=y +CONFIG_9P_FS_POSIX_ACL=y CONFIG_FUSE_FS=m CONFIG_OMFS_FS=m CONFIG_CUSE=m @@ -3443,6 +3509,8 @@ CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_NFS_FSCACHE=y # CONFIG_NFS_USE_LEGACY_DNS is not set +# CONFIG_NFS_USE_NEW_IDMAPPER is not set +# CONFIG_NFSD_DEPRECATED is not set CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m @@ -3460,7 +3528,8 @@ CONFIG_CIFS_EXPERIMENTAL=y CONFIG_CIFS_UPCALL=y CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y -# CONFIG_CIFS_FSCACHE is not set +CONFIG_CIFS_FSCACHE=y +CONFIG_CIFS_ACL=y CONFIG_CIFS_WEAK_PW_HASH=y # CONFIG_CIFS_DEBUG2 is not set CONFIG_CIFS_DFS_UPCALL=y @@ -3602,6 +3671,7 @@ CONFIG_KGDB_LOW_LEVEL_TRAP=y # Security options # CONFIG_SECURITY=y +# CONFIG_SECURITY_DMESG_RESTRICT is not set CONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_NETWORK_XFRM=y # CONFIG_SECURITY_PATH is not set @@ -3741,10 +3811,12 @@ CONFIG_CGROUP_DEVICE=y CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_SCHED=y CONFIG_CGROUP_MEM_RES_CTLR=y -CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y +CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y # XXX disabled by default, pass 'swapaccount' +# CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set CONFIG_BLK_CGROUP=y # CONFIG_DEBUG_BLK_CGROUP is not set +# CONFIG_SYSFS_DEPRECATED is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y @@ -3768,7 +3840,7 @@ CONFIG_IBMASR=m CONFIG_PM_DEBUG=y CONFIG_PM_TRACE=y # CONFIG_PM_VERBOSE is not set -# CONFIG_PM_TEST_SUSPEND is not set +CONFIG_PM_TEST_SUSPEND=y CONFIG_PM_RUNTIME=y ## BEGIN ISA Junk. @@ -3950,6 +4022,8 @@ CONFIG_LEDS_REGULATOR=m CONFIG_LEDS_LT3593=m CONFIG_LEDS_TRIGGER_GPIO=m CONFIG_LEDS_INTEL_SS4200=m +CONFIG_LEDS_LP5521=m +CONFIG_LEDS_LP5523=m CONFIG_DMADEVICES=y CONFIG_DMA_ENGINE=y @@ -4003,6 +4077,8 @@ CONFIG_APM_POWER=m CONFIG_WM831X_POWER=m # CONFIG_BATTERY_DS2760 is not set # CONFIG_BATTERY_DS2782 is not set +# CONFIG_BATTERY_BQ20Z75 is not set +# CONFIG_CHARGER_ISP1704 is not set CONFIG_BATTERY_PMU=m CONFIG_BATTERY_BQ27x00=m CONFIG_BATTERY_MAX17040=m @@ -4063,13 +4139,10 @@ CONFIG_RESOURCE_COUNTERS=y #FIXME: x86 generic? CONFIG_LEDS_CLEVO_MAIL=m CONFIG_I8K=m -CONFIG_EDAC_I3000=m -CONFIG_EDAC_X38=m CONFIG_INPUT_APANEL=m # CONFIG_INTEL_MENLOW is not set CONFIG_ENCLOSURE_SERVICES=m -CONFIG_ISL29003=m CONFIG_IPWIRELESS=m CONFIG_RTC_DRV_DS1511=m @@ -4115,6 +4188,7 @@ CONFIG_NET_SCH_MULTIQ=m CONFIG_NET_ACT_SKBEDIT=m CONFIG_PHONET=m +# CONFIG_PHONET_PIPECTRLR is not set CONFIG_ICS932S401=m # CONFIG_C2PORT is not set @@ -4197,6 +4271,13 @@ CONFIG_USB_ATMEL=m # CONFIG_EASYCAP is not set # CONFIG_SOLO6X10 is not set # CONFIG_ACPI_QUICKSTART is not set +# CONFIG_BRCM80211 is not set +# CONFIG_R8712U is not set +# CONFIG_ATH6K_LEGACY is not set +# CONFIG_USB_ENESTORAGE is not set +# CONFIG_BCM_WIMAX is not set +# CONFIG_FT1000 is not set +# CONFIG_SPEAKUP is not set # # Android @@ -4206,7 +4287,7 @@ CONFIG_USB_ATMEL=m # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FUNCTION_GRAPH_TRACER is not set -# CONFIG_BOOT_TRACER is not set +CONFIG_BOOT_TRACER=y CONFIG_EARLY_PRINTK_DBGP=y CONFIG_SECURITYFS=y @@ -4318,7 +4399,9 @@ CONFIG_GPIO_SYSFS=y # CONFIG_GPIO_SCH is not set # CONFIG_GPIO_LANGWELL is not set # CONFIG_GPIO_RDC321X is not set - +# CONFIG_GPIO_BASIC_MMIO is not set +# CONFIG_GPIO_VX855 is not set +# CONFIG_GPIO_PCH is not set CONFIG_KSYM_TRACER=y CONFIG_PROFILE_KSYM_TRACER=y @@ -4334,3 +4417,9 @@ CONFIG_IR_STREAMZAP=m # CONFIG_MFD_STMPE is not set # CONFIG_MFD_MAX8998 is not set # CONFIG_MFD_TPS6586X is not set + +CONFIG_SPARSE_RCU_POINTER=y + +# CONFIG_PM_OPP is not set + +CONFIG_BKL=y diff --git a/config-nodebug b/config-nodebug index b4472f9a5..ab9c209af 100644 --- a/config-nodebug +++ b/config-nodebug @@ -2,94 +2,98 @@ CONFIG_SND_VERBOSE_PRINTK=y CONFIG_SND_DEBUG=y CONFIG_SND_PCM_XRUN_DEBUG=y -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_PROVE_LOCKING is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_PROVE_RCU is not set +CONFIG_DEBUG_MUTEXES=y +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_LOCK_ALLOC=y +CONFIG_PROVE_LOCKING=y +CONFIG_DEBUG_VM=y +CONFIG_DEBUG_SPINLOCK=y +CONFIG_PROVE_RCU=y # CONFIG_PROVE_RCU_REPEATEDLY is not set -# CONFIG_DEBUG_PER_CPU_MAPS is not set +CONFIG_DEBUG_PER_CPU_MAPS=y CONFIG_CPUMASK_OFFSTACK=y -# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set +CONFIG_CPU_NOTIFIER_ERROR_INJECT=m -# CONFIG_FAULT_INJECTION is not set -# CONFIG_FAILSLAB is not set -# CONFIG_FAIL_PAGE_ALLOC is not set -# CONFIG_FAIL_MAKE_REQUEST is not set -# CONFIG_FAULT_INJECTION_DEBUG_FS is not set -# CONFIG_FAULT_INJECTION_STACKTRACE_FILTER is not set -# CONFIG_FAIL_IO_TIMEOUT is not set +CONFIG_FAULT_INJECTION=y +CONFIG_FAILSLAB=y +CONFIG_FAIL_PAGE_ALLOC=y +CONFIG_FAIL_MAKE_REQUEST=y +CONFIG_FAULT_INJECTION_DEBUG_FS=y +CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y +CONFIG_FAIL_IO_TIMEOUT=y -# CONFIG_SLUB_DEBUG_ON is not set +CONFIG_SLUB_DEBUG_ON=y -# CONFIG_LOCK_STAT is not set +CONFIG_LOCK_STAT=y -# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_STACK_USAGE=y -# CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_DEBUG=y # CONFIG_ACPI_DEBUG_FUNC_TRACE is not set -# CONFIG_DEBUG_SG is not set +CONFIG_DEBUG_SG=y # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DEBUG_OBJECTS is not set +CONFIG_DEBUG_WRITECOUNT=y +CONFIG_DEBUG_OBJECTS=y # CONFIG_DEBUG_OBJECTS_SELFTEST is not set -# CONFIG_DEBUG_OBJECTS_FREE is not set -# CONFIG_DEBUG_OBJECTS_TIMERS is not set +CONFIG_DEBUG_OBJECTS_FREE=y +CONFIG_DEBUG_OBJECTS_TIMERS=y CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1 -# CONFIG_X86_PTDUMP is not set +CONFIG_X86_PTDUMP=y -# CONFIG_CAN_DEBUG_DEVICES is not set +CONFIG_CAN_DEBUG_DEVICES=y -# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y -# CONFIG_DEBUG_NOTIFIERS is not set +CONFIG_DEBUG_NOTIFIERS=y -# CONFIG_DMA_API_DEBUG is not set +CONFIG_DMA_API_DEBUG=y -# CONFIG_MMIOTRACE is not set +CONFIG_MMIOTRACE=y -# CONFIG_DEBUG_CREDENTIALS is not set +CONFIG_DEBUG_CREDENTIALS=y # off in both production debug and nodebug builds, # on in rawhide nodebug builds -# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y -# CONFIG_EXT4_DEBUG is not set +CONFIG_EXT4_DEBUG=y -# CONFIG_DEBUG_PERF_USE_VMALLOC is not set +CONFIG_DEBUG_PERF_USE_VMALLOC=y -# CONFIG_JBD2_DEBUG is not set +CONFIG_JBD2_DEBUG=y -# CONFIG_DEBUG_CFQ_IOSCHED is not set +CONFIG_DEBUG_CFQ_IOSCHED=y -# CONFIG_DRBD_FAULT_INJECTION is not set +CONFIG_DRBD_FAULT_INJECTION=y -# CONFIG_ATH_DEBUG is not set -# CONFIG_IWLWIFI_DEVICE_TRACING is not set +CONFIG_ATH_DEBUG=y +CONFIG_CARL9170_DEBUGFS=y +CONFIG_IWLWIFI_DEVICE_TRACING=y -# CONFIG_DEBUG_OBJECTS_WORK is not set -# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set +CONFIG_DEBUG_OBJECTS_WORK=y +CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y -# CONFIG_DMADEVICES_DEBUG is not set -# CONFIG_DMADEVICES_VDEBUG is not set +CONFIG_DMADEVICES_DEBUG=y +CONFIG_DMADEVICES_VDEBUG=y CONFIG_PM_ADVANCED_DEBUG=y -# CONFIG_CEPH_FS_PRETTYDEBUG is not set -# CONFIG_QUOTA_DEBUG is not set +CONFIG_CEPH_LIB_PRETTYDEBUG=y +CONFIG_QUOTA_DEBUG=y -CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y +# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set CONFIG_PCI_DEFAULT_USE_CRS=y CONFIG_KGDB_KDB=y CONFIG_KDB_KEYBOARD=y + +CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y +CONFIG_TEST_LIST_SORT=y diff --git a/config-powerpc-generic b/config-powerpc-generic index 0effe3d0d..1b05f4a90 100644 --- a/config-powerpc-generic +++ b/config-powerpc-generic @@ -334,3 +334,5 @@ CONFIG_SERIAL_GRLIB_GAISLER_APBUART=m # CONFIG_GPIO_SCH is not set # CONFIG_PPC_MPC512x is not set + +CONFIG_KVM_GUEST=y diff --git a/config-s390x b/config-s390x index d9294023d..780fc9146 100644 --- a/config-s390x +++ b/config-s390x @@ -228,3 +228,8 @@ CONFIG_SMSGIUCV_EVENT=m CONFIG_VMCP=y CONFIG_ZFCP_DIF=y + +CONFIG_SCHED_MC=y +CONFIG_SCHED_BOOK=y + +CONFIG_STRICT_DEVMEM=y diff --git a/config-sparc64-generic b/config-sparc64-generic index 1d21fa781..61612cb71 100644 --- a/config-sparc64-generic +++ b/config-sparc64-generic @@ -201,3 +201,5 @@ CONFIG_GRETH=m CONFIG_FB_XVR1000=y CONFIG_CRYPTO_DEV_NIAGARA2=y + +CONFIG_JUMP_LABEL=y diff --git a/config-x86-generic b/config-x86-generic index ba3993563..68bd39b2d 100644 --- a/config-x86-generic +++ b/config-x86-generic @@ -284,6 +284,9 @@ CONFIG_EDAC_R82600=m CONFIG_EDAC_AMD8131=m CONFIG_EDAC_AMD8111=m CONFIG_EDAC_I7CORE=m +CONFIG_EDAC_I3000=m +CONFIG_EDAC_I7300=m +CONFIG_EDAC_X38=m CONFIG_SCHED_MC=y @@ -309,6 +312,7 @@ CONFIG_EEEPC_LAPTOP=m CONFIG_EEEPC_WMI=m CONFIG_FUJITSU_LAPTOP=m # CONFIG_FUJITSU_LAPTOP_DEBUG is not set +CONFIG_IDEAPAD_LAPTOP=m CONFIG_MSI_LAPTOP=m CONFIG_SONY_LAPTOP=m CONFIG_DELL_LAPTOP=m @@ -352,6 +356,7 @@ CONFIG_PARAVIRT=y # CONFIG_PARAVIRT_SPINLOCKS is not set CONFIG_KVM_CLOCK=y CONFIG_KVM_GUEST=y +CONFIG_KVM_MMU_AUDIT=y # default $x would be nice... CONFIG_LGUEST_GUEST=y CONFIG_VMI=y @@ -365,6 +370,7 @@ CONFIG_XEN_FBDEV_FRONTEND=y CONFIG_XEN_KBDDEV_FRONTEND=y CONFIG_XEN_BLKDEV_FRONTEND=m CONFIG_XEN_NETDEV_FRONTEND=m +CONFIG_XEN_PCIDEV_FRONTEND=m CONFIG_XENFS=m CONFIG_XEN_COMPAT_XENFS=y @@ -470,7 +476,7 @@ CONFIG_SBC_FITPC2_WATCHDOG=m CONFIG_EDAC_I3200=m CONFIG_EDAC_DECODE_MCE=m -CONFIG_GPIO_LANGWELL=y +# CONFIG_GPIO_LANGWELL is not set # CONFIG_INTEL_TXT is not set @@ -506,4 +512,17 @@ CONFIG_XEN_PLATFORM_PCI=m # CONFIG_ACPI_QUICKSTART is not set CONFIG_IDEAPAD_ACPI=m CONFIG_INTEL_IPS=m +# CONFIG_IBM_RTL is not set +CONFIG_OLPC_XO1=m +CONFIG_XO1_RFKILL=m +CONFIG_VIDEO_VIA_CAMERA=m + +CONFIG_EDAC_MCE_INJ=m +CONFIG_IRQ_TIME_ACCOUNTING=y +CONFIG_X86_RESERVE_LOW=64 + +CONFIG_PCH_GBE=m +CONFIG_PCH_PHUB=m + +CONFIG_JUMP_LABEL=y diff --git a/config-x86_64-generic b/config-x86_64-generic index b2e4a2531..b09e5112c 100644 --- a/config-x86_64-generic +++ b/config-x86_64-generic @@ -15,7 +15,7 @@ CONFIG_NUMA=y CONFIG_K8_NUMA=y CONFIG_X86_64_ACPI_NUMA=y # CONFIG_NUMA_EMU is not set -CONFIG_NR_CPUS=256 +CONFIG_NR_CPUS=512 CONFIG_X86_POWERNOW_K8=m CONFIG_X86_P4_CLOCKMOD=m CONFIG_IA32_EMULATION=y @@ -204,6 +204,9 @@ CONFIG_EDAC_AMD64=m # CONFIG_EDAC_AMD64_ERROR_INJECTION is not set CONFIG_EDAC_DECODE_MCE=m CONFIG_EDAC_I7CORE=m +CONFIG_EDAC_I3000=m +CONFIG_EDAC_I7300=m +CONFIG_EDAC_X38=m CONFIG_SCHED_MC=y @@ -284,6 +287,7 @@ CONFIG_PARAVIRT=y # CONFIG_PARAVIRT_SPINLOCKS is not set CONFIG_KVM_CLOCK=y CONFIG_KVM_GUEST=y +CONFIG_KVM_MMU_AUDIT=y CONFIG_XEN=y CONFIG_XEN_MAX_DOMAIN_MEMORY=32 @@ -295,6 +299,7 @@ CONFIG_XEN_FBDEV_FRONTEND=y CONFIG_XEN_KBDDEV_FRONTEND=y CONFIG_XEN_BLKDEV_FRONTEND=m CONFIG_XEN_NETDEV_FRONTEND=m +CONFIG_XEN_PCIDEV_FRONTEND=m CONFIG_XENFS=m CONFIG_XEN_COMPAT_XENFS=y CONFIG_XEN_DEV_EVTCHN=m @@ -419,5 +424,18 @@ CONFIG_XEN_PLATFORM_PCI=m # CONFIG_ACPI_QUICKSTART is not set CONFIG_IDEAPAD_ACPI=m CONFIG_INTEL_IPS=m +CONFIG_IDEAPAD_LAPTOP=m +# CONFIG_IBM_RTL is not set + +CONFIG_EDAC_MCE_INJ=m +CONFIG_IRQ_TIME_ACCOUNTING=y +CONFIG_X86_RESERVE_LOW=64 + +CONFIG_PCH_GBE=m +CONFIG_PCH_PHUB=m + +CONFIG_VIDEO_VIA_CAMERA=m + +CONFIG_JUMP_LABEL=y CONFIG_HP_ILO=m diff --git a/debug-tty-print-dev-name.patch b/debug-tty-print-dev-name.patch index 507dfe5f1..5c06dd991 100644 --- a/debug-tty-print-dev-name.patch +++ b/debug-tty-print-dev-name.patch @@ -1,15 +1,15 @@ -diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c -index 613c852..09c86d2 100644 ---- a/drivers/char/tty_io.c -+++ b/drivers/char/tty_io.c -@@ -1322,7 +1322,11 @@ static int tty_reopen(struct tty_struct *tty) +diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c +index 878f6d6..8d6867d 100644 +--- a/drivers/tty/tty_io.c ++++ b/drivers/tty/tty_io.c +@@ -1329,7 +1330,11 @@ static int tty_reopen(struct tty_struct *tty) tty->driver = driver; /* N.B. why do this every time?? */ mutex_lock(&tty->ldisc_mutex); - WARN_ON(!test_bit(TTY_LDISC, &tty->flags)); + if (!test_bit(TTY_LDISC, &tty->flags)) { -+ printk("%s: !test_bit(TTY_LDISC, &tty->flags) dev=%s ldisc=%s\n", -+ __func__, tty->name, tty->ldisc ? tty->ldisc->ops ? tty->ldisc->ops->name : NULL : NULL); ++ printk("%s: !test_bit(TTY_LDISC, &tty->flags) dev=%s ldisc=%s flags=%x\n", ++ __func__, tty->name, tty->ldisc ? tty->ldisc->ops ? tty->ldisc->ops->name : NULL : NULL, tty->flags); + WARN_ON(1); + } mutex_unlock(&tty->ldisc_mutex); diff --git a/drm-i915-reprogram-power-monitoring-registers-on-resume.patch b/drm-i915-reprogram-power-monitoring-registers-on-resume.patch deleted file mode 100644 index a37442607..000000000 --- a/drm-i915-reprogram-power-monitoring-registers-on-resume.patch +++ /dev/null @@ -1,49 +0,0 @@ -From 48fcfc888b48ad49dd83faa107264bbfb0089cad Mon Sep 17 00:00:00 2001 -From: Kyle McMartin -Date: Wed, 3 Nov 2010 16:27:57 -0400 -Subject: [PATCH] i915: reprogram power monitoring registers on resume - -Fixes issue where i915_gfx_val was reporting values several -orders of magnitude higher than physically possible (without -leaving scorch marks on my thighs at least.) - -Signed-off-by: Kyle McMartin -Reviewed-by: Jesse Barnes -Cc: stable@kernel.org -Signed-off-by: Chris Wilson ---- - drivers/gpu/drm/i915/i915_suspend.c | 4 +++- - drivers/gpu/drm/i915/intel_drv.h | 1 + - 2 files changed, 4 insertions(+), 1 deletions(-) - -diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c -index 989c19d..454c064 100644 ---- a/drivers/gpu/drm/i915/i915_suspend.c -+++ b/drivers/gpu/drm/i915/i915_suspend.c -@@ -862,8 +862,10 @@ int i915_restore_state(struct drm_device *dev) - /* Clock gating state */ - intel_init_clock_gating(dev); - -- if (HAS_PCH_SPLIT(dev)) -+ if (HAS_PCH_SPLIT(dev)) { - ironlake_enable_drps(dev); -+ intel_init_emon(dev); -+ } - - /* Cache mode state */ - I915_WRITE (CACHE_MODE_0, dev_priv->saveCACHE_MODE_0 | 0xffff0000); -diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h -index 9af9f86..21551fe 100644 ---- a/drivers/gpu/drm/i915/intel_drv.h -+++ b/drivers/gpu/drm/i915/intel_drv.h -@@ -296,6 +296,7 @@ extern void intel_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green, - extern void intel_init_clock_gating(struct drm_device *dev); - extern void ironlake_enable_drps(struct drm_device *dev); - extern void ironlake_disable_drps(struct drm_device *dev); -+extern void intel_init_emon(struct drm_device *dev); - - extern int intel_pin_and_fence_fb_obj(struct drm_device *dev, - struct drm_gem_object *obj, --- -1.7.3.2 - diff --git a/drm-intel-big-hammer.patch b/drm-intel-big-hammer.patch index 63dc016b1..97bb2e8cd 100644 --- a/drm-intel-big-hammer.patch +++ b/drm-intel-big-hammer.patch @@ -1,16 +1,21 @@ +omgwtfbbqchainsaw? +--- + drivers/gpu/drm/i915/i915_gem.c | 5 +++++ + 1 files changed, 5 insertions(+), 0 deletions(-) + diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c -index 37427e4..08af9db 100644 +index 8eb8453..36fa9d7 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c -@@ -2553,6 +2553,11 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, - - mutex_lock(&dev->struct_mutex); +@@ -3692,6 +3692,11 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data, + if (ret) + goto pre_mutex_err; + /* We don't get the flushing right for these chipsets, use the -+ * big hamer for now to avoid random crashiness. */ ++ * big hammer for now to avoid random crashiness. */ + if (IS_I85X(dev) || IS_I865G(dev)) + wbinvd(); + - i915_verify_inactive(dev, __FILE__, __LINE__); - - if (dev_priv->mm.wedged) { + if (dev_priv->mm.suspended) { + mutex_unlock(&dev->struct_mutex); + ret = -EBUSY; diff --git a/drm-intel-edp-fixes.patch b/drm-intel-edp-fixes.patch new file mode 100644 index 000000000..c77ef116c --- /dev/null +++ b/drm-intel-edp-fixes.patch @@ -0,0 +1,44 @@ +diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c +index f737960..b1f8164 100644 +--- a/drivers/gpu/drm/i915/i915_drv.c ++++ b/drivers/gpu/drm/i915/i915_drv.c +@@ -509,6 +509,8 @@ i915_pci_remove(struct pci_dev *pdev) + { + struct drm_device *dev = pci_get_drvdata(pdev); + ++ pci_disable_device(pdev); /* core did previous enable */ ++ + drm_put_dev(dev); + } + +diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c +index 300f64b..2e3db37 100644 +--- a/drivers/gpu/drm/i915/intel_dp.c ++++ b/drivers/gpu/drm/i915/intel_dp.c +@@ -795,7 +795,8 @@ static bool ironlake_edp_panel_on (struct intel_dp *intel_dp) + { + struct drm_device *dev = intel_dp->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; +- u32 pp, idle_on_mask = PP_ON | PP_SEQUENCE_STATE_ON_IDLE; ++ u32 pp, idle_on = PP_ON | PP_SEQUENCE_STATE_ON_IDLE; ++ u32 idle_on_mask = PP_ON | PP_SEQUENCE_STATE_MASK; + + if (I915_READ(PCH_PP_STATUS) & PP_ON) + return true; +@@ -816,7 +817,7 @@ static bool ironlake_edp_panel_on (struct intel_dp *intel_dp) + */ + msleep(300); + +- if (wait_for((I915_READ(PCH_PP_STATUS) & idle_on_mask) == idle_on_mask, ++ if (wait_for((I915_READ(PCH_PP_STATUS) & idle_on_mask) == idle_on, + 5000)) + DRM_ERROR("panel on wait timed out: 0x%08x\n", + I915_READ(PCH_PP_STATUS)); +@@ -922,6 +923,7 @@ static void intel_dp_prepare(struct drm_encoder *encoder) + + if (is_edp(intel_dp)) { + ironlake_edp_backlight_off(dev); ++ ironlake_edp_panel_off(dev); + ironlake_edp_panel_on(intel_dp); + if (!is_pch_edp(intel_dp)) + ironlake_edp_pll_on(encoder); diff --git a/drm-intel-make-lvds-work.patch b/drm-intel-make-lvds-work.patch index 5ca0152da..209deb295 100644 --- a/drm-intel-make-lvds-work.patch +++ b/drm-intel-make-lvds-work.patch @@ -1,19 +1,23 @@ -diff -up linux-2.6.33.noarch/drivers/gpu/drm/i915/intel_display.c.orig linux-2.6.33.noarch/drivers/gpu/drm/i915/intel_display.c ---- linux-2.6.33.noarch/drivers/gpu/drm/i915/intel_display.c.orig 2010-03-31 16:59:39.901995671 -0400 -+++ linux-2.6.33.noarch/drivers/gpu/drm/i915/intel_display.c 2010-03-31 17:01:05.416996744 -0400 -@@ -3757,7 +3757,6 @@ struct drm_crtc *intel_get_load_detect_p - void intel_release_load_detect_pipe(struct intel_encoder *intel_encoder, int dpms_mode) + drivers/gpu/drm/i915/intel_display.c | 2 -- + 1 files changed, 0 insertions(+), 2 deletions(-) + +diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c +index 990f065..171a797 100644 +--- a/drivers/gpu/drm/i915/intel_display.c ++++ b/drivers/gpu/drm/i915/intel_display.c +@@ -4568,7 +4568,6 @@ void intel_release_load_detect_pipe(struct intel_encoder *intel_encoder, + struct drm_connector *connector, int dpms_mode) { - struct drm_encoder *encoder = &intel_encoder->enc; + struct drm_encoder *encoder = &intel_encoder->base; - struct drm_device *dev = encoder->dev; struct drm_crtc *crtc = encoder->crtc; struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; -@@ -3767,7 +3766,6 @@ void intel_release_load_detect_pipe(stru - intel_encoder->base.encoder = NULL; +@@ -4578,7 +4577,6 @@ void intel_release_load_detect_pipe(struct intel_encoder *intel_encoder, + connector->encoder = NULL; intel_encoder->load_detect_temp = false; crtc->enabled = drm_helper_crtc_in_use(crtc); - drm_helper_disable_unused_functions(dev); } - /* Switch crtc and output back off if necessary */ + /* Switch crtc and encoder back off if necessary */ diff --git a/fix-i8k-inline-asm.patch b/fix-i8k-inline-asm.patch deleted file mode 100644 index 87fadc014..000000000 --- a/fix-i8k-inline-asm.patch +++ /dev/null @@ -1,84 +0,0 @@ -commit 22d3243de86bc92d874abb7c5b185d5c47aba323 -Author: Jim Bos -Date: Mon Nov 15 21:22:37 2010 +0100 - - Fix gcc 4.5.1 miscompiling drivers/char/i8k.c (again) - - The fix in commit 6b4e81db2552 ("i8k: Tell gcc that *regs gets - clobbered") to work around the gcc miscompiling i8k.c to add "+m - (*regs)" caused register pressure problems and a build failure. - - Changing the 'asm' statement to 'asm volatile' instead should prevent - that and works around the gcc bug as well, so we can remove the "+m". - - [ Background on the gcc bug: a memory clobber fails to mark the function - the asm resides in as non-pure (aka "__attribute__((const))"), so if - the function does nothing else that triggers the non-pure logic, gcc - will think that that function has no side effects at all. As a result, - callers will be mis-compiled. - - Adding the "+m" made gcc see that it's not a pure function, and so - does "asm volatile". The problem was never really the need to mark - "*regs" as changed, since the memory clobber did that part - the - problem was just a bug in the gcc "pure" function analysis - Linus ] - - Signed-off-by: Jim Bos - Acked-by: Jakub Jelinek - Cc: Andi Kleen - Cc: Andreas Schwab - Signed-off-by: Linus Torvalds - -commit 6b4e81db2552bad04100e7d5ddeed7e848f53b48 -Author: Jim Bos -Date: Sat Nov 13 12:13:53 2010 +0100 - - i8k: Tell gcc that *regs gets clobbered - - More recent GCC caused the i8k driver to stop working, on Slackware - compiler was upgraded from gcc-4.4.4 to gcc-4.5.1 after which it didn't - work anymore, meaning the driver didn't load or gave total nonsensical - output. - - As it turned out the asm(..) statement forgot to mention it modifies the - *regs variable. - - Credits to Andi Kleen and Andreas Schwab for providing the fix. - - Signed-off-by: Jim Bos - Cc: Andi Kleen - Cc: Andreas Schwab - Signed-off-by: Linus Torvalds - ---- -diff --git a/drivers/char/i8k.c b/drivers/char/i8k.c -index 3bc0eef..d72433f 100644 ---- a/drivers/char/i8k.c -+++ b/drivers/char/i8k.c -@@ -120,7 +120,7 @@ static int i8k_smm(struct smm_regs *regs) - int eax = regs->eax; - - #if defined(CONFIG_X86_64) -- asm("pushq %%rax\n\t" -+ asm volatile("pushq %%rax\n\t" - "movl 0(%%rax),%%edx\n\t" - "pushq %%rdx\n\t" - "movl 4(%%rax),%%ebx\n\t" -@@ -146,7 +146,7 @@ static int i8k_smm(struct smm_regs *regs) - : "a"(regs) - : "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory"); - #else -- asm("pushl %%eax\n\t" -+ asm volatile("pushl %%eax\n\t" - "movl 0(%%eax),%%edx\n\t" - "push %%edx\n\t" - "movl 4(%%eax),%%ebx\n\t" -@@ -167,7 +167,8 @@ static int i8k_smm(struct smm_regs *regs) - "movl %%edx,0(%%eax)\n\t" - "lahf\n\t" - "shrl $8,%%eax\n\t" -- "andl $1,%%eax\n":"=a"(rc) -+ "andl $1,%%eax\n" -+ :"=a"(rc) - : "a"(regs) - : "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory"); - #endif diff --git a/hdpvr-ir-enable.patch b/hdpvr-ir-enable.patch index 787c8f84c..e73c42122 100644 --- a/hdpvr-ir-enable.patch +++ b/hdpvr-ir-enable.patch @@ -110,7 +110,7 @@ index 463b81b..60cdc06 100644 msgs[i].len); } -@@ -115,31 +120,59 @@ static struct i2c_algorithm hdpvr_algo = { +@@ -115,30 +120,58 @@ static struct i2c_algorithm hdpvr_algo = { .functionality = hdpvr_functionality, }; @@ -119,7 +119,6 @@ index 463b81b..60cdc06 100644 + .owner = THIS_MODULE, + .id = I2C_HW_B_HDPVR, + .algo = &hdpvr_algo, -+ .class = I2C_CLASS_TV_ANALOG, +}; + +static struct i2c_board_info hdpvr_i2c_board_info = { @@ -160,7 +159,6 @@ index 463b81b..60cdc06 100644 - strlcpy(i2c_adap->name, "Hauppauge HD PVR I2C", - sizeof(i2c_adap->name)); - i2c_adap->algo = &hdpvr_algo; -- i2c_adap->class = I2C_CLASS_TV_ANALOG; - i2c_adap->owner = THIS_MODULE; - i2c_adap->dev.parent = &dev->udev->dev; + memcpy(&dev->i2c_adapter, &hdpvr_i2c_adapter_template, @@ -218,3 +216,14 @@ index b0f046d..2107055 100644 /* I2C lock */ struct mutex i2c_mutex; +diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h +index 4bef5c5..4385341 100644 +--- a/include/linux/i2c-id.h ++++ b/include/linux/i2c-id.h +@@ -33,5 +33,6 @@ + + /* --- Bit algorithm adapters */ + #define I2C_HW_B_CX2388x 0x01001b /* connexant 2388x based tv cards */ ++#define I2C_HW_B_HDPVR 0x010025 /* Hauppauge HD PVR */ + + #endif /* LINUX_I2C_ID_H */ diff --git a/inet_diag-make-sure-we-run-the-same-bytecode-we-audited.patch b/inet_diag-make-sure-we-run-the-same-bytecode-we-audited.patch deleted file mode 100644 index bb1693fdd..000000000 --- a/inet_diag-make-sure-we-run-the-same-bytecode-we-audited.patch +++ /dev/null @@ -1,105 +0,0 @@ -From 83962729dfeb1586d2909ae9b5bab204786a9afc Mon Sep 17 00:00:00 2001 -From: Nelson Elhage -Date: Wed, 3 Nov 2010 16:35:41 +0000 -Subject: inet_diag: Make sure we actually run the same bytecode we audited. - -We were using nlmsg_find_attr() to look up the bytecode by attribute when -auditing, but then just using the first attribute when actually running -bytecode. So, if we received a message with two attribute elements, where only -the second had type INET_DIAG_REQ_BYTECODE, we would validate and run different -bytecode strings. - -Fix this by consistently using nlmsg_find_attr everywhere. - -Signed-off-by: Nelson Elhage -Signed-off-by: Thomas Graf -Signed-off-by: David S. Miller ---- - net/ipv4/inet_diag.c | 27 ++++++++++++++++----------- - 1 files changed, 16 insertions(+), 11 deletions(-) - -diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c -index e5fa2dd..7403b9b 100644 ---- a/net/ipv4/inet_diag.c -+++ b/net/ipv4/inet_diag.c -@@ -490,9 +490,11 @@ static int inet_csk_diag_dump(struct sock *sk, - { - struct inet_diag_req *r = NLMSG_DATA(cb->nlh); - -- if (cb->nlh->nlmsg_len > 4 + NLMSG_SPACE(sizeof(*r))) { -+ if (nlmsg_attrlen(cb->nlh, sizeof(*r))) { - struct inet_diag_entry entry; -- struct rtattr *bc = (struct rtattr *)(r + 1); -+ const struct nlattr *bc = nlmsg_find_attr(cb->nlh, -+ sizeof(*r), -+ INET_DIAG_REQ_BYTECODE); - struct inet_sock *inet = inet_sk(sk); - - entry.family = sk->sk_family; -@@ -512,7 +514,7 @@ static int inet_csk_diag_dump(struct sock *sk, - entry.dport = ntohs(inet->inet_dport); - entry.userlocks = sk->sk_userlocks; - -- if (!inet_diag_bc_run(RTA_DATA(bc), RTA_PAYLOAD(bc), &entry)) -+ if (!inet_diag_bc_run(nla_data(bc), nla_len(bc), &entry)) - return 0; - } - -@@ -527,9 +529,11 @@ static int inet_twsk_diag_dump(struct inet_timewait_sock *tw, - { - struct inet_diag_req *r = NLMSG_DATA(cb->nlh); - -- if (cb->nlh->nlmsg_len > 4 + NLMSG_SPACE(sizeof(*r))) { -+ if (nlmsg_attrlen(cb->nlh, sizeof(*r))) { - struct inet_diag_entry entry; -- struct rtattr *bc = (struct rtattr *)(r + 1); -+ const struct nlattr *bc = nlmsg_find_attr(cb->nlh, -+ sizeof(*r), -+ INET_DIAG_REQ_BYTECODE); - - entry.family = tw->tw_family; - #if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE) -@@ -548,7 +552,7 @@ static int inet_twsk_diag_dump(struct inet_timewait_sock *tw, - entry.dport = ntohs(tw->tw_dport); - entry.userlocks = 0; - -- if (!inet_diag_bc_run(RTA_DATA(bc), RTA_PAYLOAD(bc), &entry)) -+ if (!inet_diag_bc_run(nla_data(bc), nla_len(bc), &entry)) - return 0; - } - -@@ -618,7 +622,7 @@ static int inet_diag_dump_reqs(struct sk_buff *skb, struct sock *sk, - struct inet_diag_req *r = NLMSG_DATA(cb->nlh); - struct inet_connection_sock *icsk = inet_csk(sk); - struct listen_sock *lopt; -- struct rtattr *bc = NULL; -+ const struct nlattr *bc = NULL; - struct inet_sock *inet = inet_sk(sk); - int j, s_j; - int reqnum, s_reqnum; -@@ -638,8 +642,9 @@ static int inet_diag_dump_reqs(struct sk_buff *skb, struct sock *sk, - if (!lopt || !lopt->qlen) - goto out; - -- if (cb->nlh->nlmsg_len > 4 + NLMSG_SPACE(sizeof(*r))) { -- bc = (struct rtattr *)(r + 1); -+ if (nlmsg_attrlen(cb->nlh, sizeof(*r))) { -+ bc = nlmsg_find_attr(cb->nlh, sizeof(*r), -+ INET_DIAG_REQ_BYTECODE); - entry.sport = inet->inet_num; - entry.userlocks = sk->sk_userlocks; - } -@@ -672,8 +677,8 @@ static int inet_diag_dump_reqs(struct sk_buff *skb, struct sock *sk, - &ireq->rmt_addr; - entry.dport = ntohs(ireq->rmt_port); - -- if (!inet_diag_bc_run(RTA_DATA(bc), -- RTA_PAYLOAD(bc), &entry)) -+ if (!inet_diag_bc_run(nla_data(bc), -+ nla_len(bc), &entry)) - continue; - } - --- -1.7.3.2 - diff --git a/kernel.spec b/kernel.spec index 8b30de6c4..be5fcc0ad 100644 --- a/kernel.spec +++ b/kernel.spec @@ -6,7 +6,7 @@ Summary: The Linux kernel # For a stable, released kernel, released_kernel should be 1. For rawhide # and/or a kernel built from an rc or git snapshot, released_kernel should # be 0. -%global released_kernel 1 +%global released_kernel 0 # Save original buildid for later if it's defined %if 0%{?buildid:1} @@ -51,7 +51,7 @@ Summary: The Linux kernel # For non-released -rc kernels, this will be prepended with "0.", so # for example a 3 here will become 0.3 # -%global baserelease 12 +%global baserelease 1 %global fedora_build %{baserelease} # base_sublevel is the kernel version we're starting with and patching @@ -63,9 +63,9 @@ Summary: The Linux kernel %if 0%{?released_kernel} # Do we have a -stable update to apply? -%define stable_update 2 +%define stable_update 0 # Is it a -stable RC? -%define stable_rc 1 +%define stable_rc 0 # Set rpm version accordingly %if 0%{?stable_update} %define stablerev .%{stable_update} @@ -82,9 +82,9 @@ Summary: The Linux kernel # The next upstream release sublevel (base_sublevel+1) %define upstream_sublevel %(echo $((%{base_sublevel} + 1))) # The rc snapshot level -%define rcrev 0 +%define rcrev 5 # The git snapshot level -%define gitrev 0 +%define gitrev 2 # Set rpm version accordingly %define rpmversion 2.6.%{upstream_sublevel} %endif @@ -128,7 +128,7 @@ Summary: The Linux kernel %define doc_build_fail true %endif -%define rawhide_skip_docs 0 +%define rawhide_skip_docs 1 %if 0%{?rawhide_skip_docs} %define with_doc 0 %define doc_build_fail true @@ -149,7 +149,7 @@ Summary: The Linux kernel # Set debugbuildsenabled to 1 for production (build separate debug kernels) # and 0 for rawhide (all kernels are debug kernels). # See also 'make debug' and 'make release'. -%define debugbuildsenabled 1 +%define debugbuildsenabled 0 # Want to build a vanilla kernel build without any non-upstream patches? %define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0} @@ -175,7 +175,7 @@ Summary: The Linux kernel %else %define gittag .git0 %endif -%define pkg_release 0.%{fedora_build}%{?rctag}%{?gittag}%{?buildid}%{?dist} +%define pkg_release 0%{?rctag}%{?gittag}.%{fedora_build}%{?buildid}%{?dist} %endif @@ -609,10 +609,6 @@ Patch202: linux-2.6-debug-taint-vm.patch Patch203: linux-2.6-debug-vm-would-have-oomkilled.patch Patch204: linux-2.6-debug-always-inline-kzalloc.patch -Patch210: debug-tty-print-dev-name.patch - -Patch300: pnp-log-pnp-resources-as-we-do-for-pci.patch - Patch380: linux-2.6-defaults-pci_no_msi.patch Patch381: linux-2.6-defaults-pci_use_crs.patch Patch383: linux-2.6-defaults-aspm.patch @@ -654,8 +650,12 @@ Patch1555: fix_xen_guest_on_old_EC2.patch # nouveau + drm fixes Patch1810: drm-nouveau-updates.patch Patch1819: drm-intel-big-hammer.patch +# intel drm is all merged upstream +Patch1824: drm-intel-next.patch # make sure the lvds comes back on lid open Patch1825: drm-intel-make-lvds-work.patch +Patch1826: drm-intel-edp-fixes.patch + Patch1900: linux-2.6-intel-iommu-igfx.patch # linux1394 git patches @@ -694,52 +694,20 @@ Patch12018: neuter_intel_microcode_load.patch Patch12030: tpm-fix-stall-on-boot.patch -# Wacom Bamboo -Patch12100: wacom-01-add-fuzz-parameters-to-features.patch -Patch12105: wacom-02-parse-the-bamboo-device-family.patch -Patch12110: wacom-03-collect-device-quirks-into-single-function.patch -Patch12115: wacom-04-add-support-for-the-bamboo-touch-trackpad.patch -Patch12120: wacom-05-add-a-quirk-for-low-resolution-bamboo-devices.patch -Patch12125: wacom-06-request-tablet-data-for-bamboo-pens.patch -Patch12130: wacom-07-move-bamboo-touch-irq-to-its-own-function.patch -Patch12135: wacom-08-add-support-for-bamboo-pen.patch -Patch12140: wacom-09-disable-bamboo-touchpad-when-pen-is-being-used.patch - # Runtime power management -Patch12200: linux-2.6-bluetooth-autosuspend.patch -Patch12201: linux-2.6-uvc-autosuspend.patch -Patch12202: linux-2.6-qcserial-autosuspend.patch Patch12203: linux-2.6-usb-pci-autosuspend.patch Patch12204: linux-2.6-enable-more-pci-autosuspend.patch Patch12205: runtime_pm_fixups.patch -Patch12225: pci-crs-fixes.patch -Patch12226: x86-never-alloc-pci-from-the-last-1M-below-4G.patch - -Patch12300: btusb-macbookpro-7-1.patch -Patch12301: btusb-macbookpro-6-2.patch -Patch12304: add-macbookair3-ids.patch - Patch12303: dmar-disable-when-ricoh-multifunction.patch -Patch12305: xhci_hcd-suspend-resume.patch +Patch12401: debug-tty-print-dev-name.patch -Patch12308: fix-i8k-inline-asm.patch +Patch12410: mm-page-allocator-adjust-the-per-cpu-counter-threshold-when-memory-is-low.patch +Patch12411: mm-vmstat-use-a-single-setter-function-and-callback-for-adjusting-percpu-thresholds.patch -Patch12405: inet_diag-make-sure-we-run-the-same-bytecode-we-audited.patch -Patch12408: netlink-make-nlmsg_find_attr-take-a-const-ptr.patch - -Patch12406: posix-cpu-timers-workaround-to-suppress-problems-with-mt-exec.patch - -Patch12410: tty-make-tiocgicount-a-handler.patch -Patch12411: tty-icount-changeover-for-other-main-devices.patch - -Patch12413: tpm-autodetect-itpm-devices.patch - -Patch12420: mm-page-allocator-adjust-the-per-cpu-counter-threshold-when-memory-is-low.patch -Patch12421: mm-vmstat-use-a-single-setter-function-and-callback-for-adjusting-percpu-thresholds.patch - -Patch12430: sched-cure-more-NO_HZ-load-average-woes.patch +# rhbz#650934 +Patch12420: sched-cure-more-NO_HZ-load-average-woes.patch %endif @@ -1099,17 +1067,17 @@ else fi # Now build the fedora kernel tree. -if [ -d linux-%{KVERREL} ]; then +if [ -d linux-%{kversion}.%{_target_cpu} ]; then # Just in case we ctrl-c'd a prep already rm -rf deleteme.%{_target_cpu} # Move away the stale away, and delete in background. - mv linux-%{KVERREL} deleteme.%{_target_cpu} + mv linux-%{kversion}.%{_target_cpu} deleteme.%{_target_cpu} rm -rf deleteme.%{_target_cpu} & fi -cp -rl vanilla-%{vanillaversion} linux-%{KVERREL} +cp -rl vanilla-%{vanillaversion} linux-%{kversion}.%{_target_cpu} -cd linux-%{KVERREL} +cd linux-%{kversion}.%{_target_cpu} # released_kernel with possible stable updates %if 0%{?stable_base} @@ -1216,8 +1184,6 @@ ApplyPatch linux-2.6-debug-taint-vm.patch ApplyPatch linux-2.6-debug-vm-would-have-oomkilled.patch ApplyPatch linux-2.6-debug-always-inline-kzalloc.patch -ApplyPatch debug-tty-print-dev-name.patch - # # PCI # @@ -1227,10 +1193,7 @@ ApplyPatch linux-2.6-defaults-pci_use_crs.patch # enable ASPM by default on hardware we expect to work ApplyPatch linux-2.6-defaults-aspm.patch -# helps debug resource conflicts [c1f3f281] -ApplyPatch pnp-log-pnp-resources-as-we-do-for-pci.patch - -ApplyPatch ima-allow-it-to-be-completely-disabled-and-default-off.patch +#ApplyPatch ima-allow-it-to-be-completely-disabled-and-default-off.patch # # SCSI Bits. @@ -1289,9 +1252,11 @@ ApplyPatch fix_xen_guest_on_old_EC2.patch ApplyOptionalPatch drm-nouveau-updates.patch # Intel DRM +ApplyOptionalPatch drm-intel-next.patch ApplyPatch drm-intel-big-hammer.patch ApplyPatch drm-intel-make-lvds-work.patch ApplyPatch linux-2.6-intel-iommu-igfx.patch +ApplyPatch drm-intel-edp-fixes.patch # linux1394 git patches #ApplyPatch linux-2.6-firewire-git-update.patch @@ -1325,61 +1290,21 @@ ApplyPatch neuter_intel_microcode_load.patch # try to fix stalls during boot (#530393) ApplyPatch tpm-fix-stall-on-boot.patch -# Wacom Bamboo -ApplyPatch wacom-01-add-fuzz-parameters-to-features.patch -ApplyPatch wacom-02-parse-the-bamboo-device-family.patch -ApplyPatch wacom-03-collect-device-quirks-into-single-function.patch -ApplyPatch wacom-04-add-support-for-the-bamboo-touch-trackpad.patch -ApplyPatch wacom-05-add-a-quirk-for-low-resolution-bamboo-devices.patch -ApplyPatch wacom-06-request-tablet-data-for-bamboo-pens.patch -ApplyPatch wacom-07-move-bamboo-touch-irq-to-its-own-function.patch -ApplyPatch wacom-08-add-support-for-bamboo-pen.patch -ApplyPatch wacom-09-disable-bamboo-touchpad-when-pen-is-being-used.patch - # Runtime PM -ApplyPatch linux-2.6-bluetooth-autosuspend.patch -ApplyPatch linux-2.6-uvc-autosuspend.patch -ApplyPatch linux-2.6-qcserial-autosuspend.patch ApplyPatch linux-2.6-usb-pci-autosuspend.patch ApplyPatch linux-2.6-enable-more-pci-autosuspend.patch ApplyPatch runtime_pm_fixups.patch -# PCI patches to fix problems with _CRS -# ( from linux-pci list ) -ApplyPatch pci-crs-fixes.patch -ApplyPatch x86-never-alloc-pci-from-the-last-1M-below-4G.patch - -ApplyPatch btusb-macbookpro-7-1.patch -ApplyPatch btusb-macbookpro-6-2.patch -ApplyPatch add-macbookair3-ids.patch - # rhbz#605888 ApplyPatch dmar-disable-when-ricoh-multifunction.patch -ApplyPatch xhci_hcd-suspend-resume.patch - -ApplyPatch fix-i8k-inline-asm.patch - -# rhbz#651264 (CVE-2010-3880) -ApplyPatch inet_diag-make-sure-we-run-the-same-bytecode-we-audited.patch -ApplyPatch netlink-make-nlmsg_find_attr-take-a-const-ptr.patch - -# rhbz#656264 -ApplyPatch posix-cpu-timers-workaround-to-suppress-problems-with-mt-exec.patch - -# CVE-2010-4077, CVE-2010-4075 (rhbz#648660, #648663) -ApplyPatch tty-make-tiocgicount-a-handler.patch -ApplyPatch tty-icount-changeover-for-other-main-devices.patch - -ApplyPatch tpm-autodetect-itpm-devices.patch +# rhbz#630464 +ApplyPatch debug-tty-print-dev-name.patch # backport some fixes for kswapd from mmotm, rhbz#649694 ApplyPatch mm-page-allocator-adjust-the-per-cpu-counter-threshold-when-memory-is-low.patch ApplyPatch mm-vmstat-use-a-single-setter-function-and-callback-for-adjusting-percpu-thresholds.patch -# rhbz#650934 -ApplyPatch sched-cure-more-NO_HZ-load-average-woes.patch - # END OF PATCH APPLICATIONS %endif @@ -1667,7 +1592,7 @@ rm -rf $RPM_BUILD_ROOT mkdir -p $RPM_BUILD_ROOT/boot mkdir -p $RPM_BUILD_ROOT%{_libexecdir} -cd linux-%{KVERREL} +cd linux-%{kversion}.%{_target_cpu} %if %{with_debug} BuildKernel %make_target %kernel_image debug @@ -1698,8 +1623,7 @@ BuildKernel %make_target %kernel_image smp %if %{with_doc} # Make the HTML and man pages. -# %{?_smp_mflags} frequently fails when j>8 -make htmldocs mandocs || %{doc_build_fail} +make %{?_smp_mflags} htmldocs mandocs || %{doc_build_fail} # sometimes non-world-readable files sneak into the kernel source tree chmod -R a=rX Documentation @@ -1733,7 +1657,7 @@ find Documentation -type d | xargs chmod u+w %install -cd linux-%{KVERREL} +cd linux-%{kversion}.%{_target_cpu} %if %{with_doc} docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{rpmversion} @@ -1994,123 +1918,113 @@ fi # || || %changelog -* Wed Dec 08 2010 Kyle McMartin 2.6.36.2-12.rc1 -- Linux stable 2.6.36.2-rc1 -- Drop patches merged in stable series: - tty-dont-allow-reopen-when-ldisc-is-changing.patch - tty-ldisc-fix-open-flag-handling.patch - tty-open-hangup-race-fixup.patch - tty-restore-tty_ldisc_wait_idle.patch - hda_realtek-handle-unset-external-amp-bits.patch - ipc-shm-fix-information-leak-to-user.patch - ipc-zero-struct-memory-for-compat-fns.patch - linux-2.6-rcu-sched-warning.patch - pnpacpi-cope-with-invalid-device-ids.patch - radeon-mc-vram-map-needs-to-be-gt-pci-aperture.patch - -* Wed Dec 08 2010 Kyle McMartin +* Wed Dec 08 2010 Kyle McMartin 2.6.37-0.rc5.git2.1 +- Linux 2.6.37-rc5-git2 - sched-cure-more-NO_HZ-load-average-woes.patch: fix some of the complaints in 2.6.35+ about load average with dynticks. (rhbz#650934) +* Tue Dec 07 2010 Kyle McMartin 2.6.37-0.rc5.git0.1 +- Linux 2.6.37-rc5 + * Sat Dec 04 2010 Kyle McMartin - Enable C++ symbol demangling with perf by linking against libiberty.a, which is LGPL2. -* Fri Dec 03 2010 Kyle McMartin 2.6.36.1-11 -- Enable HP ILO on x86_64. (#571329) +* Fri Dec 03 2010 Kyle McMartin +- Linux 2.6.37-rc4-git3 +- Enable HP ILO on x86_64 for (#571329) +- Drop merged drm-fixes.patch, split out edp-fixes. +- tty-dont-allow-reopen-when-ldisc-is-changing.patch: upstream. +- tty-ldisc-fix-open-flag-handling.patch: upstream. +- Enable CIFS_ACL. * Thu Dec 02 2010 Kyle McMartin - Grab some of Mel's fixes from -mmotm to hopefully sort out #649694. - They've been tested by a few on that bug on 2.6.35, but let's push - it out to a bigger audience. + +* Wed Dec 01 2010 Kyle McMartin 2.6.37-0.rc4.git1.1 +- Linux 2.6.37-rc4-git1 +- Pull in DRM fixes that are queued for -rc5 [3074adc8] + + edp-fixes on top + +* Tue Nov 30 2010 Kyle McMartin 2.6.37-0.rc4.git0.1 +- Linux 2.6.37-rc4 * Mon Nov 29 2010 Kyle McMartin -- PNP: log PNP resources, as we do for PCI [c1f3f281] - should help us debug resource conflicts (requested by bjorn.) +- Update debug-vm-would_have_oomkilled patch. -* Mon Nov 29 2010 Kyle McMartin 2.6.36.1-10 -- tpm-autodetect-itpm-devices.patch: Auto-fix TPM issues on various - laptops which prevented suspend/resume. (#647132) -- tty fixes from kernel-git (#630464) +* Mon Nov 29 2010 Kyle McMartin 2.6.37-0.rc3.git6.1 +- Linux 2.6.37-rc3-git6 +- TTY: open/hangup race fixup (rhbz#630464) + +* Fri Nov 26 2010 Kyle McMartin 2.6.37-0.rc3.git3.1 +- Linux 2.6.37-rc3-git3 +- Print tty->flags as well in debugging patch... * Fri Nov 26 2010 Kyle McMartin -- Quiet a build warning the previous INET_DIAG fix caused. +- Copy tty_open WARN_ON debugging patch from rawhide. -* Fri Nov 26 2010 Kyle McMartin -- Plug stack leaks in tty/serial drivers. (#648663, #648660) +* Fri Nov 26 2010 Kyle McMartin 2.6.37-0.rc3.git2.1 +- Linux 2.6.37-rc3-git2 +- CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set, so the cgroup memory + resource controller swap accounting is disabled by default. You can + enable it with 'swapaccount' if desired. +- TTY: don't allow reopen when ldisc is changing (rhbz#630464) -* Fri Nov 26 2010 Kyle McMartin -- hda/realtek: handle unset external amp config (#657388) +* Wed Nov 24 2010 Kyle McMartin 2.6.37-0.rc3.git1.1 +- Linux 2.6.37-rc3-git1 -* Wed Nov 24 2010 Kyle McMartin -- Disable FSCACHE for CIFS until issues are addressed. (#656498) +* Mon Nov 22 2010 Kyle McMartin 2.6.37-0.rc3.git0.1 +- Linux 2.6.37-rc3 -* Wed Nov 24 2010 Kyle McMartin -- drm/radeon/kms: MC vram map needs to be >= pci aperture size (fdo#28402) +* Sat Nov 20 2010 Kyle McMartin 2.6.37-0.rc2.git7.1 +- Linux 2.6.37-rc2-git7 -* Wed Nov 24 2010 Kyle McMartin -- Fix graphics on HP 2530p (korg#23542) +* Fri Nov 19 2010 Kyle McMartin 2.6.37-0.rc2.git5.1 +- Linux 2.6.37-rc2-git5 -* Tue Nov 23 2010 Kyle McMartin -- zero struct memory in ipc compat (CVE-2010-4073) (#648658) -- zero struct memory in ipc shm (CVE-2010-4072) (#648656) -- fix logic error in INET_DIAG bytecode auditing (CVE-2010-3880) (#651264) -- posix-cpu-timers: workaround to suppress the problems with mt exec - (rhbz#656264) +* Thu Nov 18 2010 Kyle McMartin +- Move %{fedora_build} in the un-released (ie: -git/-rc) kernel case for + a variety of reasons, principally so that: + 1: Bumping %baserelease isn't needed if we're just updating snapshots. + 2: %buildid will sort as newer so we don't need to bump baserelease when + building bugzilla fixes. -* Tue Nov 23 2010 Kyle McMartin -- fix-i8k-inline-asm.patch: backport gcc miscompilation fix from git - [22d3243d, 6b4e81db] (rhbz#647677) - -* Mon Nov 22 2010 Kyle McMartin -- Add a debugging patch to help track down which tty is being - poked by plymouth. - -* Mon Nov 22 2010 Kyle McMartin 2.6.36.1-9 -- Linux stable 2.6.36.1 - -* Mon Nov 22 2010 Kyle McMartin 2.6.36.1-8.rc1 -- Merge 100eeae2 (TTY: restore tty_ldisc_wait_idle) which should fix the WARN - in tty_open in rawhide. - -* Mon Nov 22 2010 Kyle McMartin 2.6.36.1-7.rc1 -- Make vmlinuz world readable again. - -* Sat Nov 20 2010 Kyle McMartin -- Merge patch from Aris to allow kernel-debuginfo to be multiply-installed - (means we had to move the build dir, kind of a bummer, but I verified - that a -gitN to -gitN+1 worked.) - -* Sat Nov 20 2010 Chuck Ebbert 2.6.36.1-6.rc1 -- Linux 2.6.36.1-rc1 -- Comment out upstreamed patches: - secmark-do-not-return-early-if-there-was-no-error.patch - -* Sat Nov 20 2010 Kyle McMartin -- secmark-do-not-return-early-if-there-was-no-error.patch: requested - by eparis@. (Fixes a BUG when using secmark.) - -* Wed Nov 17 2010 Kyle McMartin 2.6.36-5 -- Disable drm/intel rebase until it can be fixed. +* Wed Nov 17 2010 Kyle McMartin 2.6.37-0.1.rc2.git2 +- Linux 2.6.37-rc2-git2 +- enable STRICT_DEVMEM on s390x. * Wed Nov 17 2010 Kyle McMartin - Make vmlinuz/System.map root read-write only by default. You can just chmod 644 them later if you (unlikely) need them without root. -* Tue Nov 16 2010 Kyle McMartin 2.6.36-4 -- Disable parallel doc builds, they fail. Constantly. +* Mon Nov 15 2010 Kyle McMartin 2.6.37-0.1.rc2.git0 +- Linux 2.6.37-rc2 -* Tue Nov 16 2010 Kyle McMartin 2.6.36-3 -- Rebase drm/intel to 2.6.37-rc2+edp_fixes, hopefully to sort out most of - the issues folks with eDP are having. -- Switch to release builds and turn on debugging flavours. +* Sat Nov 13 2010 Kyle McMartin 2.6.37-0.1.rc1.git10 +- Linux 2.6.37-rc1-git10 +- SECURITY_DMESG_RESTRICT added, the principle of least surprise dictates + we should probably have it off. If you want to restrict dmesg access + you may use the kernel.dmesg_restrict sysctl. +- linux-2.6-bluetooth-autosuspend.patch: merged upstream. -* Mon Nov 15 2010 Kyle McMartin -- rhbz#651019: pull in support for MBA3. +* Tue Nov 09 2010 Kyle McMartin 2.6.37-0.1.rc1.git7 +- Linux 2.6.37-rc1-git7 -* Mon Nov 15 2010 Kyle McMartin 2.6.36-2 -- drm-i915-reprogram-power-monitoring-registers-on-resume.patch: fix intel_ips - driver. +* Mon Nov 08 2010 Kyle McMartin 2.6.37-0.1.rc1.git5 +- Linux 2.6.37-rc1-git5 + +* Mon Nov 08 2010 Kyle McMartin +- Cherry-pick utrace-ptrace fixes from mayoung. Thanks! + +* Tue Nov 02 2010 Kyle McMartin 2.6.37-0.1.rc1.git0 +- Linux 2.6.37-rc1 + +* Tue Oct 26 2010 Kyle McMartin 2.6.37-0.1.rc0.git8 +- Linux 2.6.36-git8 + +* Fri Oct 22 2010 Kyle McMartin 2.6.37-0.1.rc0.git2 +- Switch to tracking git snapshots of what will become 2.6.37. +- Fix context rejects in utrace and a few other patches. * Wed Oct 20 2010 Chuck Ebbert 2.6.36-1 - Linux 2.6.36 diff --git a/linux-2.6-32bit-mmap-exec-randomization.patch b/linux-2.6-32bit-mmap-exec-randomization.patch index fe91e0abf..d42638c27 100644 --- a/linux-2.6-32bit-mmap-exec-randomization.patch +++ b/linux-2.6-32bit-mmap-exec-randomization.patch @@ -14,9 +14,9 @@ --- b/mm/mmap.c +++ b/mm/mmap.c @@ -28,6 +28,7 @@ - #include #include #include + #include +#include #include diff --git a/linux-2.6-bluetooth-autosuspend.patch b/linux-2.6-bluetooth-autosuspend.patch deleted file mode 100644 index 663b79979..000000000 --- a/linux-2.6-bluetooth-autosuspend.patch +++ /dev/null @@ -1,159 +0,0 @@ -commit 6aa42966dea9a1fc02a714211ea489c3278bf8d4 -Author: Matthew Garrett -Date: Thu Sep 16 13:34:55 2010 -0400 - - bluetooth: Take a runtime pm reference on hid connections - - Bluetooth runtime PM interacts badly with input devices - the connection - will be dropped if the device becomes idle, resulting in noticable lag when - the user interacts with the input device again. Bump the pm runtime count - when the device is associated and release it when it's disassociated in - order to avoid this. - - Signed-off-by: Matthew Garrett - -diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c -index bfe641b..a4489a7 100644 ---- a/net/bluetooth/hidp/core.c -+++ b/net/bluetooth/hidp/core.c -@@ -36,6 +36,7 @@ - #include - #include - #include -+#include - #include - - #include -@@ -622,6 +623,14 @@ static int hidp_session(void *arg) - return 0; - } - -+static struct hci_dev *hidp_get_hci(struct hidp_session *session) -+{ -+ bdaddr_t *src = &bt_sk(session->ctrl_sock->sk)->src; -+ bdaddr_t *dst = &bt_sk(session->ctrl_sock->sk)->dst; -+ -+ return hci_get_route(dst, src); -+} -+ - static struct device *hidp_get_device(struct hidp_session *session) - { - bdaddr_t *src = &bt_sk(session->ctrl_sock->sk)->src; -@@ -819,6 +828,7 @@ fault: - int hidp_add_connection(struct hidp_connadd_req *req, struct socket *ctrl_sock, struct socket *intr_sock) - { - struct hidp_session *session, *s; -+ struct hci_dev *hdev; - int err; - - BT_DBG(""); -@@ -889,6 +899,10 @@ int hidp_add_connection(struct hidp_connadd_req *req, struct socket *ctrl_sock, - hidp_input_event(session->input, EV_LED, 0, 0); - } - -+ hdev = hidp_get_hci(session); -+ pm_runtime_get(hdev->parent); -+ hci_dev_put(hdev); -+ - up_write(&hidp_session_sem); - return 0; - -@@ -925,6 +939,7 @@ failed: - int hidp_del_connection(struct hidp_conndel_req *req) - { - struct hidp_session *session; -+ struct hci_dev *hdev; - int err = 0; - - BT_DBG(""); -@@ -952,6 +967,9 @@ int hidp_del_connection(struct hidp_conndel_req *req) - } else - err = -ENOENT; - -+ hdev = hidp_get_hci(session); -+ pm_runtime_put(hdev->parent); -+ hci_dev_put(hdev); - up_read(&hidp_session_sem); - return err; - } - -commit 482eca592615e85b048753750b101d051b77fde9 -Author: Matthew Garrett -Date: Thu Sep 16 13:49:24 2010 -0400 - - bluetooth: Remove some unnecessary error messages - - The main reason for these urbs to error out on submission is that runtime - pm has kicked in, which is unnecessary noise. Let's just drop them. - - Signed-off-by: Matthew Garrett - -diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c -index d22ce3c..3ace025 100644 ---- a/drivers/bluetooth/btusb.c -+++ b/drivers/bluetooth/btusb.c -@@ -229,11 +229,8 @@ static void btusb_intr_complete(struct urb *urb) - usb_anchor_urb(urb, &data->intr_anchor); - - err = usb_submit_urb(urb, GFP_ATOMIC); -- if (err < 0) { -- BT_ERR("%s urb %p failed to resubmit (%d)", -- hdev->name, urb, -err); -+ if (err < 0) - usb_unanchor_urb(urb); -- } - } - - static int btusb_submit_intr_urb(struct hci_dev *hdev, gfp_t mem_flags) -@@ -313,11 +310,8 @@ static void btusb_bulk_complete(struct urb *urb) - usb_mark_last_busy(data->udev); - - err = usb_submit_urb(urb, GFP_ATOMIC); -- if (err < 0) { -- BT_ERR("%s urb %p failed to resubmit (%d)", -- hdev->name, urb, -err); -+ if (err < 0) - usb_unanchor_urb(urb); -- } - } - - static int btusb_submit_bulk_urb(struct hci_dev *hdev, gfp_t mem_flags) -@@ -402,11 +396,8 @@ static void btusb_isoc_complete(struct urb *urb) - usb_anchor_urb(urb, &data->isoc_anchor); - - err = usb_submit_urb(urb, GFP_ATOMIC); -- if (err < 0) { -- BT_ERR("%s urb %p failed to resubmit (%d)", -- hdev->name, urb, -err); -+ if (err < 0) - usb_unanchor_urb(urb); -- } - } - - static void inline __fill_isoc_descriptor(struct urb *urb, int len, int mtu) - -commit fd763c5b14ed99ac2401f8e8f1a07c3687ae01cc -Author: Matthew Garrett -Date: Thu Sep 16 13:37:38 2010 -0400 - - bluetooth: Enable USB autosuspend by default on btusb - - We've done this for a while in Fedora without any obvious problems other - than some interaction with input devices. Those should be fixed now, so - let's try this in mainline. - - Signed-off-by: Matthew Garrett - -diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c -index 3ace025..03b64e4 100644 ---- a/drivers/bluetooth/btusb.c -+++ b/drivers/bluetooth/btusb.c -@@ -1014,6 +1014,8 @@ static int btusb_probe(struct usb_interface *intf, - - usb_set_intfdata(intf, data); - -+ usb_enable_autosuspend(interface_to_usbdev(intf)); -+ - return 0; - } - diff --git a/linux-2.6-crash-driver.patch b/linux-2.6-crash-driver.patch index 7b518bb88..0f11aba0d 100644 --- a/linux-2.6-crash-driver.patch +++ b/linux-2.6-crash-driver.patch @@ -233,18 +233,6 @@ index 3141dd3..153658c 100644 config LEGACY_PTY_COUNT int "Maximum number of legacy PTY in use" -diff --git a/drivers/char/Makefile b/drivers/char/Makefile -index f957edf..604c418 100644 ---- a/drivers/char/Makefile -+++ b/drivers/char/Makefile -@@ -111,6 +111,8 @@ obj-$(CONFIG_PS3_FLASH) += ps3flash.o - obj-$(CONFIG_JS_RTC) += js-rtc.o - js-rtc-y = rtc.o - -+obj-$(CONFIG_CRASH) += crash.o -+ - # Files generated that shall be removed upon make clean - clean-files := consolemap_deftbl.c defkeymap.c diff --git a/drivers/char/crash.c b/drivers/char/crash.c new file mode 100644 @@ -380,6 +368,14 @@ index 0000000..e5437de +module_exit(crash_cleanup_module); + +MODULE_LICENSE("GPL"); --- -1.7.0.1 +diff --git a/drivers/char/Makefile b/drivers/char/Makefile +index ba53ec9..6588b33 100644 +--- a/drivers/char/Makefile ++++ b/drivers/char/Makefile +@@ -98,3 +98,5 @@ obj-$(CONFIG_RAMOOPS) += ramoops.o + + obj-$(CONFIG_JS_RTC) += js-rtc.o + js-rtc-y = rtc.o ++ ++obj-$(CONFIG_CRASH) += crash.o diff --git a/linux-2.6-enable-more-pci-autosuspend.patch b/linux-2.6-enable-more-pci-autosuspend.patch index b1f92b134..666ded640 100644 --- a/linux-2.6-enable-more-pci-autosuspend.patch +++ b/linux-2.6-enable-more-pci-autosuspend.patch @@ -1,7 +1,20 @@ -diff -up linux-2.6.35.x86_64/drivers/acpi/acpica/aclocal.h.mjg linux-2.6.35.x86_64/drivers/acpi/acpica/aclocal.h ---- linux-2.6.35.x86_64/drivers/acpi/acpica/aclocal.h.mjg 2010-10-04 13:52:05.086789354 -0400 -+++ linux-2.6.35.x86_64/drivers/acpi/acpica/aclocal.h 2010-10-04 13:52:50.948801001 -0400 -@@ -406,16 +406,15 @@ struct acpi_predefined_data { + drivers/acpi/acpica/aclocal.h | 7 +-- + drivers/acpi/acpica/evgpe.c | 75 +++++++++++++++----------------- + drivers/acpi/acpica/evgpeinit.c | 11 +---- + drivers/acpi/acpica/evgpeutil.c | 5 +- + drivers/acpi/acpica/evxface.c | 23 +++++----- + drivers/acpi/ec.c | 2 +- + drivers/acpi/pci_bind.c | 86 ++++++++++++++++++++++++++++++++++++++ + drivers/acpi/sleep.c | 2 +- + drivers/char/ipmi/ipmi_si_intf.c | 2 +- + include/acpi/acpixf.h | 3 +- + 10 files changed, 143 insertions(+), 73 deletions(-) + +diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h +index 2ceb0c0..3663362 100644 +--- a/drivers/acpi/acpica/aclocal.h ++++ b/drivers/acpi/acpica/aclocal.h +@@ -406,17 +406,16 @@ struct acpi_predefined_data { * ****************************************************************************/ @@ -13,6 +26,7 @@ diff -up linux-2.6.35.x86_64/drivers/acpi/acpica/aclocal.h.mjg linux-2.6.35.x86_ void *context; /* Context to be passed to handler */ - struct acpi_namespace_node *method_node; /* Method node for this GPE level (saved) */ u8 orig_flags; /* Original misc info about this GPE */ + u8 orig_enabled; /* Set if the GPE was originally enabled */ }; -union acpi_gpe_dispatch_info { @@ -20,7 +34,7 @@ diff -up linux-2.6.35.x86_64/drivers/acpi/acpica/aclocal.h.mjg linux-2.6.35.x86_ struct acpi_namespace_node *method_node; /* Method node for this GPE level */ struct acpi_handler_info *handler; }; -@@ -425,7 +424,7 @@ union acpi_gpe_dispatch_info { +@@ -426,7 +425,7 @@ union acpi_gpe_dispatch_info { * NOTE: Important to keep this struct as small as possible. */ struct acpi_gpe_event_info { @@ -29,10 +43,11 @@ diff -up linux-2.6.35.x86_64/drivers/acpi/acpica/aclocal.h.mjg linux-2.6.35.x86_ struct acpi_gpe_register_info *register_info; /* Backpointer to register info */ u8 flags; /* Misc info about this GPE */ u8 gpe_number; /* This GPE */ -diff -up linux-2.6.35.x86_64/drivers/acpi/acpica/evgpe.c.mjg linux-2.6.35.x86_64/drivers/acpi/acpica/evgpe.c ---- linux-2.6.35.x86_64/drivers/acpi/acpica/evgpe.c.mjg 2010-10-04 13:52:05.088789399 -0400 -+++ linux-2.6.35.x86_64/drivers/acpi/acpica/evgpe.c 2010-10-04 13:52:50.950801045 -0400 -@@ -474,9 +474,7 @@ static void ACPI_SYSTEM_XFACE acpi_ev_as +diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c +index f226eac..c4b1c4c 100644 +--- a/drivers/acpi/acpica/evgpe.c ++++ b/drivers/acpi/acpica/evgpe.c +@@ -474,9 +474,7 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context) * Must check for control method type dispatch one more time to avoid a * race with ev_gpe_install_handler */ @@ -43,7 +58,7 @@ diff -up linux-2.6.35.x86_64/drivers/acpi/acpica/evgpe.c.mjg linux-2.6.35.x86_64 /* Allocate the evaluation information block */ info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_evaluate_info)); -@@ -575,41 +573,15 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_eve +@@ -575,41 +573,15 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number) } /* @@ -93,7 +108,7 @@ diff -up linux-2.6.35.x86_64/drivers/acpi/acpica/evgpe.c.mjg linux-2.6.35.x86_64 /* * Disable the GPE, so it doesn't keep firing before the method has a * chance to run (it runs asynchronously with interrupts enabled). -@@ -634,10 +606,34 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_eve +@@ -634,10 +606,34 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number) "Unable to queue handler for GPE[0x%2X] - event disabled", gpe_number)); } @@ -111,7 +126,7 @@ diff -up linux-2.6.35.x86_64/drivers/acpi/acpica/evgpe.c.mjg linux-2.6.35.x86_64 + dispatch. + handler-> + context); -+ + + /* It is now safe to clear level-triggered events. */ + + if ((gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK) == @@ -125,12 +140,12 @@ diff -up linux-2.6.35.x86_64/drivers/acpi/acpica/evgpe.c.mjg linux-2.6.35.x86_64 + } + } + } - ++ + if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK)) { /* * No handler or method to run! * 03/2010: This case should no longer be possible. We will not allow -@@ -658,7 +654,6 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_eve +@@ -658,7 +654,6 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number) gpe_number)); return_UINT32(ACPI_INTERRUPT_NOT_HANDLED); } @@ -138,10 +153,11 @@ diff -up linux-2.6.35.x86_64/drivers/acpi/acpica/evgpe.c.mjg linux-2.6.35.x86_64 } return_UINT32(ACPI_INTERRUPT_HANDLED); -diff -up linux-2.6.35.x86_64/drivers/acpi/acpica/evgpeinit.c.mjg linux-2.6.35.x86_64/drivers/acpi/acpica/evgpeinit.c ---- linux-2.6.35.x86_64/drivers/acpi/acpica/evgpeinit.c.mjg 2010-10-04 13:52:05.089789421 -0400 -+++ linux-2.6.35.x86_64/drivers/acpi/acpica/evgpeinit.c 2010-10-04 13:52:50.951801067 -0400 -@@ -392,16 +392,7 @@ acpi_ev_match_gpe_method(acpi_handle obj +diff --git a/drivers/acpi/acpica/evgpeinit.c b/drivers/acpi/acpica/evgpeinit.c +index 2c7def9..9915b52 100644 +--- a/drivers/acpi/acpica/evgpeinit.c ++++ b/drivers/acpi/acpica/evgpeinit.c +@@ -386,16 +386,7 @@ acpi_ev_match_gpe_method(acpi_handle obj_handle, return_ACPI_STATUS(AE_OK); } @@ -159,10 +175,11 @@ diff -up linux-2.6.35.x86_64/drivers/acpi/acpica/evgpeinit.c.mjg linux-2.6.35.x8 /* * If there is already a method, ignore this method. But check * for a type mismatch (if both the _Lxx AND _Exx exist) -diff -up linux-2.6.35.x86_64/drivers/acpi/acpica/evgpeutil.c.mjg linux-2.6.35.x86_64/drivers/acpi/acpica/evgpeutil.c ---- linux-2.6.35.x86_64/drivers/acpi/acpica/evgpeutil.c.mjg 2010-10-04 13:52:05.090789443 -0400 -+++ linux-2.6.35.x86_64/drivers/acpi/acpica/evgpeutil.c 2010-10-04 13:52:50.952801089 -0400 -@@ -323,12 +323,11 @@ acpi_ev_delete_gpe_handlers(struct acpi_ +diff --git a/drivers/acpi/acpica/evgpeutil.c b/drivers/acpi/acpica/evgpeutil.c +index 19a0e51..434ad1b 100644 +--- a/drivers/acpi/acpica/evgpeutil.c ++++ b/drivers/acpi/acpica/evgpeutil.c +@@ -323,12 +323,11 @@ acpi_ev_delete_gpe_handlers(struct acpi_gpe_xrupt_info *gpe_xrupt_info, ACPI_GPE_REGISTER_WIDTH) + j]; @@ -177,10 +194,11 @@ diff -up linux-2.6.35.x86_64/drivers/acpi/acpica/evgpeutil.c.mjg linux-2.6.35.x8 } } } -diff -up linux-2.6.35.x86_64/drivers/acpi/acpica/evxface.c.mjg linux-2.6.35.x86_64/drivers/acpi/acpica/evxface.c ---- linux-2.6.35.x86_64/drivers/acpi/acpica/evxface.c.mjg 2010-10-04 13:52:05.092789487 -0400 -+++ linux-2.6.35.x86_64/drivers/acpi/acpica/evxface.c 2010-10-04 13:52:50.954801133 -0400 -@@ -662,6 +662,8 @@ ACPI_EXPORT_SYMBOL(acpi_remove_notify_ha +diff --git a/drivers/acpi/acpica/evxface.c b/drivers/acpi/acpica/evxface.c +index 36af222..b097136 100644 +--- a/drivers/acpi/acpica/evxface.c ++++ b/drivers/acpi/acpica/evxface.c +@@ -662,6 +662,8 @@ ACPI_EXPORT_SYMBOL(acpi_remove_notify_handler) * edge- or level-triggered interrupt. * Address - Address of the handler * Context - Value passed to the handler on each GPE @@ -189,7 +207,7 @@ diff -up linux-2.6.35.x86_64/drivers/acpi/acpica/evxface.c.mjg linux-2.6.35.x86_ * * RETURN: Status * -@@ -671,7 +673,8 @@ ACPI_EXPORT_SYMBOL(acpi_remove_notify_ha +@@ -671,7 +673,8 @@ ACPI_EXPORT_SYMBOL(acpi_remove_notify_handler) acpi_status acpi_install_gpe_handler(acpi_handle gpe_device, u32 gpe_number, @@ -199,7 +217,7 @@ diff -up linux-2.6.35.x86_64/drivers/acpi/acpica/evxface.c.mjg linux-2.6.35.x86_ { struct acpi_gpe_event_info *gpe_event_info; struct acpi_handler_info *handler; -@@ -711,8 +714,7 @@ acpi_install_gpe_handler(acpi_handle gpe +@@ -711,8 +714,7 @@ acpi_install_gpe_handler(acpi_handle gpe_device, /* Make sure that there isn't a handler there already */ @@ -209,7 +227,7 @@ diff -up linux-2.6.35.x86_64/drivers/acpi/acpica/evxface.c.mjg linux-2.6.35.x86_ status = AE_ALREADY_EXISTS; goto free_and_exit; } -@@ -721,7 +723,6 @@ acpi_install_gpe_handler(acpi_handle gpe +@@ -721,7 +723,6 @@ acpi_install_gpe_handler(acpi_handle gpe_device, handler->address = address; handler->context = context; @@ -217,15 +235,16 @@ diff -up linux-2.6.35.x86_64/drivers/acpi/acpica/evxface.c.mjg linux-2.6.35.x86_ handler->orig_flags = gpe_event_info->flags & (ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK); -@@ -733,17 +734,17 @@ acpi_install_gpe_handler(acpi_handle gpe +@@ -732,7 +733,7 @@ acpi_install_gpe_handler(acpi_handle gpe_device, */ if ((handler->orig_flags & ACPI_GPE_DISPATCH_METHOD) -- && !(gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) -+ && !(gpe_event_info->flags & ACPI_GPE_CAN_WAKE) && !keep_method) +- && gpe_event_info->runtime_count) { ++ && gpe_event_info->runtime_count && !keep_method) { + handler->orig_enabled = 1; (void)acpi_raw_disable_gpe(gpe_event_info); - - /* Install the handler */ + } +@@ -741,10 +742,10 @@ acpi_install_gpe_handler(acpi_handle gpe_device, gpe_event_info->dispatch.handler = handler; @@ -239,7 +258,7 @@ diff -up linux-2.6.35.x86_64/drivers/acpi/acpica/evxface.c.mjg linux-2.6.35.x86_ gpe_event_info->flags |= (u8) (type | ACPI_GPE_DISPATCH_HANDLER); acpi_os_release_lock(acpi_gbl_gpe_lock, flags); -@@ -812,8 +813,7 @@ acpi_remove_gpe_handler(acpi_handle gpe_ +@@ -813,8 +814,7 @@ acpi_remove_gpe_handler(acpi_handle gpe_device, /* Make sure that a handler is indeed installed */ @@ -249,7 +268,7 @@ diff -up linux-2.6.35.x86_64/drivers/acpi/acpica/evxface.c.mjg linux-2.6.35.x86_ status = AE_NOT_EXIST; goto unlock_and_exit; } -@@ -829,9 +829,8 @@ acpi_remove_gpe_handler(acpi_handle gpe_ +@@ -830,9 +830,8 @@ acpi_remove_gpe_handler(acpi_handle gpe_device, handler = gpe_event_info->dispatch.handler; @@ -260,10 +279,11 @@ diff -up linux-2.6.35.x86_64/drivers/acpi/acpica/evxface.c.mjg linux-2.6.35.x86_ gpe_event_info->flags &= ~(ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK); gpe_event_info->flags |= handler->orig_flags; -diff -up linux-2.6.35.x86_64/drivers/acpi/ec.c.mjg linux-2.6.35.x86_64/drivers/acpi/ec.c ---- linux-2.6.35.x86_64/drivers/acpi/ec.c.mjg 2010-10-04 13:52:05.094789531 -0400 -+++ linux-2.6.35.x86_64/drivers/acpi/ec.c 2010-10-04 13:52:50.955801156 -0400 -@@ -746,7 +746,7 @@ static int ec_install_handlers(struct ac +diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c +index 372ff80..9a39f82 100644 +--- a/drivers/acpi/ec.c ++++ b/drivers/acpi/ec.c +@@ -740,7 +740,7 @@ static int ec_install_handlers(struct acpi_ec *ec) return 0; status = acpi_install_gpe_handler(NULL, ec->gpe, ACPI_GPE_EDGE_TRIGGERED, @@ -272,9 +292,10 @@ diff -up linux-2.6.35.x86_64/drivers/acpi/ec.c.mjg linux-2.6.35.x86_64/drivers/a if (ACPI_FAILURE(status)) return -ENODEV; -diff -up linux-2.6.35.x86_64/drivers/acpi/pci_bind.c.mjg linux-2.6.35.x86_64/drivers/acpi/pci_bind.c ---- linux-2.6.35.x86_64/drivers/acpi/pci_bind.c.mjg 2010-10-04 13:52:05.102789707 -0400 -+++ linux-2.6.35.x86_64/drivers/acpi/pci_bind.c 2010-10-04 13:52:50.962801311 -0400 +diff --git a/drivers/acpi/pci_bind.c b/drivers/acpi/pci_bind.c +index 2ef0409..8b3cc6a 100644 +--- a/drivers/acpi/pci_bind.c ++++ b/drivers/acpi/pci_bind.c @@ -28,6 +28,7 @@ #include #include @@ -327,7 +348,7 @@ diff -up linux-2.6.35.x86_64/drivers/acpi/pci_bind.c.mjg linux-2.6.35.x86_64/dri static int acpi_pci_unbind(struct acpi_device *device) { struct pci_dev *dev; -@@ -43,6 +81,30 @@ static int acpi_pci_unbind(struct acpi_d +@@ -43,6 +81,30 @@ static int acpi_pci_unbind(struct acpi_device *device) if (!dev) goto out; @@ -358,7 +379,7 @@ diff -up linux-2.6.35.x86_64/drivers/acpi/pci_bind.c.mjg linux-2.6.35.x86_64/dri device_set_run_wake(&dev->dev, false); pci_acpi_remove_pm_notifier(device); -@@ -71,6 +133,30 @@ static int acpi_pci_bind(struct acpi_dev +@@ -71,6 +133,30 @@ static int acpi_pci_bind(struct acpi_device *device) return 0; pci_acpi_add_pm_notifier(device, dev); @@ -389,25 +410,24 @@ diff -up linux-2.6.35.x86_64/drivers/acpi/pci_bind.c.mjg linux-2.6.35.x86_64/dri if (device->wakeup.flags.run_wake) device_set_run_wake(&dev->dev, true); -diff -up linux-2.6.35.x86_64/drivers/acpi/sleep.c.mjg linux-2.6.35.x86_64/drivers/acpi/sleep.c ---- linux-2.6.35.x86_64/drivers/acpi/sleep.c.mjg 2010-10-04 13:52:05.103789729 -0400 -+++ linux-2.6.35.x86_64/drivers/acpi/sleep.c 2010-10-04 13:52:50.963801333 -0400 -@@ -631,9 +631,9 @@ int acpi_pm_device_sleep_state(struct de - acpi_method[3] = 'W'; - status = acpi_evaluate_integer(handle, acpi_method, NULL, - &d_max); -- if (ACPI_FAILURE(status)) { -+ if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - d_max = d_min; +diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c +index 721d93b..b0ddef6 100644 +--- a/drivers/acpi/sleep.c ++++ b/drivers/acpi/sleep.c +@@ -643,7 +643,7 @@ int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p) + if (acpi_target_sleep_state != ACPI_STATE_S0 || + status != AE_NOT_FOUND) + d_max = d_min; - } else if (d_max < d_min) { + } else if (ACPI_SUCCESS(status) && d_max < d_min) { /* Warn the user of the broken DSDT */ printk(KERN_WARNING "ACPI: Wrong value from %s\n", acpi_method); -diff -up linux-2.6.35.x86_64/drivers/char/ipmi/ipmi_si_intf.c.mjg linux-2.6.35.x86_64/drivers/char/ipmi/ipmi_si_intf.c ---- linux-2.6.35.x86_64/drivers/char/ipmi/ipmi_si_intf.c.mjg 2010-10-04 13:52:05.097789597 -0400 -+++ linux-2.6.35.x86_64/drivers/char/ipmi/ipmi_si_intf.c 2010-10-04 13:52:50.958801223 -0400 -@@ -1959,7 +1959,7 @@ static int acpi_gpe_irq_setup(struct smi +diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c +index 035da9e..62a48b2 100644 +--- a/drivers/char/ipmi/ipmi_si_intf.c ++++ b/drivers/char/ipmi/ipmi_si_intf.c +@@ -1970,7 +1970,7 @@ static int acpi_gpe_irq_setup(struct smi_info *info) info->irq, ACPI_GPE_LEVEL_TRIGGERED, &ipmi_acpi_gpe, @@ -416,126 +436,11 @@ diff -up linux-2.6.35.x86_64/drivers/char/ipmi/ipmi_si_intf.c.mjg linux-2.6.35.x if (status != AE_OK) { dev_warn(info->dev, "%s unable to claim ACPI GPE %d," " running polled\n", DEVICE_NAME, info->irq); -diff -up linux-2.6.35.x86_64/drivers/pci/pci.c.mjg linux-2.6.35.x86_64/drivers/pci/pci.c ---- linux-2.6.35.x86_64/drivers/pci/pci.c.mjg 2010-10-04 13:52:05.105789773 -0400 -+++ linux-2.6.35.x86_64/drivers/pci/pci.c 2010-10-04 13:52:50.965801377 -0400 -@@ -38,6 +38,19 @@ EXPORT_SYMBOL(pci_pci_problems); - - unsigned int pci_pm_d3_delay; - -+static void pci_pme_list_scan(struct work_struct *work); -+ -+static LIST_HEAD(pci_pme_list); -+static DEFINE_MUTEX(pci_pme_list_mutex); -+static DECLARE_DELAYED_WORK(pci_pme_work, pci_pme_list_scan); -+ -+struct pci_pme_device { -+ struct list_head list; -+ struct pci_dev *dev; -+}; -+ -+#define PME_TIMEOUT 1000 /* How long between PME checks */ -+ - static void pci_dev_d3_sleep(struct pci_dev *dev) - { - unsigned int delay = dev->d3_delay; -@@ -1331,6 +1344,32 @@ bool pci_pme_capable(struct pci_dev *dev - return !!(dev->pme_support & (1 << state)); - } - -+static void pci_pme_list_scan(struct work_struct *work) -+{ -+ struct pci_pme_device *pme_dev; -+ -+ mutex_lock(&pci_pme_list_mutex); -+ if (!list_empty(&pci_pme_list)) { -+ list_for_each_entry(pme_dev, &pci_pme_list, list) -+ pci_pme_wakeup(pme_dev->dev, NULL); -+ schedule_delayed_work(&pci_pme_work, msecs_to_jiffies(PME_TIMEOUT)); -+ } -+ mutex_unlock(&pci_pme_list_mutex); -+} -+ -+/** -+ * pci_external_pme - is a device an external PCI PME source? -+ * @dev: PCI device to check -+ * -+ */ -+ -+static bool pci_external_pme(struct pci_dev *dev) -+{ -+ if (pci_is_pcie(dev) || dev->bus->number == 0) -+ return false; -+ return true; -+} -+ - /** - * pci_pme_active - enable or disable PCI device's PME# function - * @dev: PCI device to handle. -@@ -1354,6 +1393,44 @@ void pci_pme_active(struct pci_dev *dev, - - pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr); - -+ /* PCI (as opposed to PCIe) PME requires that the device have -+ its PME# line hooked up correctly. Not all hardware vendors -+ do this, so the PME never gets delivered and the device -+ remains asleep. The easiest way around this is to -+ periodically walk the list of suspended devices and check -+ whether any have their PME flag set. The assumption is that -+ we'll wake up often enough anyway that this won't be a huge -+ hit, and the power savings from the devices will still be a -+ win. */ -+ -+ if (pci_external_pme(dev)) { -+ struct pci_pme_device *pme_dev; -+ if (enable) { -+ pme_dev = kmalloc(sizeof(struct pci_pme_device), -+ GFP_KERNEL); -+ if (!pme_dev) -+ goto out; -+ pme_dev->dev = dev; -+ mutex_lock(&pci_pme_list_mutex); -+ list_add(&pme_dev->list, &pci_pme_list); -+ if (list_is_singular(&pci_pme_list)) -+ schedule_delayed_work(&pci_pme_work, -+ msecs_to_jiffies(PME_TIMEOUT)); -+ mutex_unlock(&pci_pme_list_mutex); -+ } else { -+ mutex_lock(&pci_pme_list_mutex); -+ list_for_each_entry(pme_dev, &pci_pme_list, list) { -+ if (pme_dev->dev == dev) { -+ list_del(&pme_dev->list); -+ kfree(pme_dev); -+ break; -+ } -+ } -+ mutex_unlock(&pci_pme_list_mutex); -+ } -+ } -+ -+out: - dev_printk(KERN_DEBUG, &dev->dev, "PME# %s\n", - enable ? "enabled" : "disabled"); - } -diff -up linux-2.6.35.x86_64/drivers/pci/pci.h.mjg linux-2.6.35.x86_64/drivers/pci/pci.h ---- linux-2.6.35.x86_64/drivers/pci/pci.h.mjg 2010-10-04 13:52:05.100789663 -0400 -+++ linux-2.6.35.x86_64/drivers/pci/pci.h 2010-10-04 13:52:50.960801267 -0400 -@@ -63,11 +63,8 @@ struct pci_platform_pm_ops { - extern int pci_set_platform_pm(struct pci_platform_pm_ops *ops); - extern void pci_update_current_state(struct pci_dev *dev, pci_power_t state); - extern void pci_disable_enabled_device(struct pci_dev *dev); --extern bool pci_check_pme_status(struct pci_dev *dev); - extern int pci_finish_runtime_suspend(struct pci_dev *dev); --extern void pci_wakeup_event(struct pci_dev *dev); - extern int __pci_pme_wakeup(struct pci_dev *dev, void *ign); --extern void pci_pme_wakeup_bus(struct pci_bus *bus); - extern void pci_pm_init(struct pci_dev *dev); - extern void platform_pci_wakeup_init(struct pci_dev *dev); - extern void pci_allocate_cap_save_buffers(struct pci_dev *dev); -diff -up linux-2.6.35.x86_64/include/acpi/acpixf.h.mjg linux-2.6.35.x86_64/include/acpi/acpixf.h ---- linux-2.6.35.x86_64/include/acpi/acpixf.h.mjg 2010-10-04 13:52:05.099789641 -0400 -+++ linux-2.6.35.x86_64/include/acpi/acpixf.h 2010-10-04 13:52:50.959801245 -0400 -@@ -253,7 +253,8 @@ acpi_remove_address_space_handler(acpi_h +diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h +index 53b7cfd..740eb7e 100644 +--- a/include/acpi/acpixf.h ++++ b/include/acpi/acpixf.h +@@ -258,7 +258,8 @@ acpi_remove_address_space_handler(acpi_handle device, acpi_status acpi_install_gpe_handler(acpi_handle gpe_device, u32 gpe_number, @@ -545,16 +450,3 @@ diff -up linux-2.6.35.x86_64/include/acpi/acpixf.h.mjg linux-2.6.35.x86_64/inclu acpi_status acpi_remove_gpe_handler(acpi_handle gpe_device, -diff -up linux-2.6.35.x86_64/include/linux/pci.h.mjg linux-2.6.35.x86_64/include/linux/pci.h ---- linux-2.6.35.x86_64/include/linux/pci.h.mjg 2010-10-04 13:52:05.101789685 -0400 -+++ linux-2.6.35.x86_64/include/linux/pci.h 2010-10-04 13:52:50.962801311 -0400 -@@ -819,6 +819,9 @@ pci_power_t pci_target_state(struct pci_ - int pci_prepare_to_sleep(struct pci_dev *dev); - int pci_back_from_sleep(struct pci_dev *dev); - bool pci_dev_run_wake(struct pci_dev *dev); -+bool pci_check_pme_status(struct pci_dev *dev); -+void pci_wakeup_event(struct pci_dev *dev); -+void pci_pme_wakeup_bus(struct pci_bus *bus); - - static inline int pci_enable_wake(struct pci_dev *dev, pci_power_t state, - bool enable) diff --git a/linux-2.6-i386-nx-emulation.patch b/linux-2.6-i386-nx-emulation.patch index 094c5b845..24a2ed500 100644 --- a/linux-2.6-i386-nx-emulation.patch +++ b/linux-2.6-i386-nx-emulation.patch @@ -394,8 +394,8 @@ --- a/arch/x86/mm/tlb.c +++ b/arch/x86/mm/tlb.c @@ -6,6 +6,7 @@ - #include #include + #include +#include #include diff --git a/linux-2.6-qcserial-autosuspend.patch b/linux-2.6-qcserial-autosuspend.patch deleted file mode 100644 index 524898813..000000000 --- a/linux-2.6-qcserial-autosuspend.patch +++ /dev/null @@ -1,23 +0,0 @@ -commit 0fe584342da141957c8642191b508ad39e9b19e6 -Author: Matthew Garrett -Date: Thu Sep 16 13:39:31 2010 -0400 - - usbserial: Enable USB autosuspend by default on qcserial - - Seems to work fine in my testing. - - Signed-off-by: Matthew Garrett - -diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c -index cde67ca..2846ad8 100644 ---- a/drivers/usb/serial/qcserial.c -+++ b/drivers/usb/serial/qcserial.c -@@ -118,6 +118,8 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) - - spin_lock_init(&data->susp_lock); - -+ usb_enable_autosuspend(serial->dev); -+ - switch (nintf) { - case 1: - /* QDL mode */ diff --git a/linux-2.6-utrace-ptrace.patch b/linux-2.6-utrace-ptrace.patch index a609fb628..caeae6760 100644 --- a/linux-2.6-utrace-ptrace.patch +++ b/linux-2.6-utrace-ptrace.patch @@ -29,9 +29,9 @@ index a85fb41..235c1b0 100644 - +extern void ptrace_notify_stop(struct task_struct *tracee); - extern long arch_ptrace(struct task_struct *child, long request, long addr, long data); + extern long arch_ptrace(struct task_struct *child, long request, + unsigned long addr, unsigned long data); extern int ptrace_traceme(void); - extern int ptrace_readdata(struct task_struct *tsk, unsigned long src, char __user *dst, int len); diff --git a/kernel/Makefile b/kernel/Makefile index 6004913..b09c9a5 100644 --- a/kernel/Makefile @@ -673,7 +673,7 @@ index ...a90078d 100644 + * under ptrace. + */ + retval = -ERESTARTNOINTR; -+ if (mutex_lock_interruptible(&task->cred_guard_mutex)) ++ if (mutex_lock_interruptible(&task->signal->cred_guard_mutex)) + goto out; + + task_lock(task); @@ -703,7 +703,7 @@ index ...a90078d 100644 +unlock_tasklist: + write_unlock_irq(&tasklist_lock); +unlock_creds: -+ mutex_unlock(&task->cred_guard_mutex); ++ mutex_unlock(&task->signal->cred_guard_mutex); +out: + return retval; +} @@ -1014,7 +1014,7 @@ index ...a90078d 100644 + struct iovec *kiov); + +int ptrace_request(struct task_struct *child, long request, -+ long addr, long data) ++ unsigned long addr, unsigned long data) +{ + struct utrace_engine *engine = ptrace_lookup_engine(child); + siginfo_t siginfo; @@ -1412,7 +1412,7 @@ index 23bde94..daed9e8 100644 +#define arch_ptrace_attach(child) do { } while (0) +#endif + -+SYSCALL_DEFINE4(ptrace, long, request, long, pid, long, addr, long, data) ++SYSCALL_DEFINE4(ptrace, long, request, long, pid, unsigned long, addr, unsigned long, data) +{ + struct task_struct *child; + long ret; @@ -1453,7 +1453,7 @@ index 23bde94..daed9e8 100644 + return ret; +} + -+int generic_ptrace_peekdata(struct task_struct *tsk, long addr, long data) ++int generic_ptrace_peekdata(struct task_struct *tsk, unsigned long addr, unsigned long data) +{ + unsigned long tmp; + int copied; @@ -1464,7 +1464,7 @@ index 23bde94..daed9e8 100644 + return put_user(tmp, (unsigned long __user *)data); +} + -+int generic_ptrace_pokedata(struct task_struct *tsk, long addr, long data) ++int generic_ptrace_pokedata(struct task_struct *tsk, unsigned long addr, unsigned long data) +{ + int copied; + @@ -1595,7 +1595,7 @@ index 23bde94..daed9e8 100644 unlock_tasklist: - write_unlock_irq(&tasklist_lock); -unlock_creds: -- mutex_unlock(&task->cred_guard_mutex); +- mutex_unlock(&task->signal->cred_guard_mutex); -out: - return retval; -} @@ -1656,7 +1656,7 @@ index 23bde94..daed9e8 100644 - * If it should reap itself, return true. + write_unlock_irq(&tasklist_lock); +unlock_creds: -+ mutex_unlock(&task->cred_guard_mutex); ++ mutex_unlock(&task->signal->cred_guard_mutex); +out: + return retval; +} @@ -1765,7 +1765,7 @@ index 23bde94..daed9e8 100644 - return copied; -} - - static int ptrace_setoptions(struct task_struct *child, long data) + static int ptrace_setoptions(struct task_struct *child, unsigned long data) { child->ptrace &= ~PT_TRACE_MASK; @@ -530,47 +677,6 @@ static int ptrace_resume(struct task_str @@ -1814,9 +1814,9 @@ index 23bde94..daed9e8 100644 -#endif - int ptrace_request(struct task_struct *child, long request, - long addr, long data) + unsigned long addr, unsigned long data) { -@@ -686,88 +792,7 @@ int ptrace_request(struct task_struct *c +@@ -686,91 +792,7 @@ int ptrace_request(struct task_struct *c return ret; } @@ -1839,7 +1839,8 @@ index 23bde94..daed9e8 100644 -#define arch_ptrace_attach(child) do { } while (0) -#endif - --SYSCALL_DEFINE4(ptrace, long, request, long, pid, long, addr, long, data) +-SYSCALL_DEFINE4(ptrace, long, request, long, pid, unsigned long, addr, +- unsigned long, data) -{ - struct task_struct *child; - long ret; @@ -1880,7 +1881,8 @@ index 23bde94..daed9e8 100644 - return ret; -} - --int generic_ptrace_peekdata(struct task_struct *tsk, long addr, long data) +-int generic_ptrace_peekdata(struct task_struct *tsk, unsigned long addr, +- unsigned long data) -{ - unsigned long tmp; - int copied; @@ -1891,7 +1893,8 @@ index 23bde94..daed9e8 100644 - return put_user(tmp, (unsigned long __user *)data); -} - --int generic_ptrace_pokedata(struct task_struct *tsk, long addr, long data) +-int generic_ptrace_pokedata(struct task_struct *tsk, unsigned long addr, +- unsigned long data) -{ - int copied; - diff --git a/linux-2.6-utrace.patch b/linux-2.6-utrace.patch index a12357e68..c50b83ea8 100644 --- a/linux-2.6-utrace.patch +++ b/linux-2.6-utrace.patch @@ -44,7 +44,7 @@ index 34929f2..884c36b 100644 +++ b/Documentation/DocBook/Makefile @@ -14,7 +14,7 @@ DOCBOOKS := z8530book.xml mcabook.xml de genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \ - mac80211.xml debugobjects.xml sh.xml regulator.xml \ + 80211.xml debugobjects.xml sh.xml regulator.xml \ alsa-driver-api.xml writing-an-alsa-driver.xml \ - tracepoint.xml media.xml drm.xml + tracepoint.xml utrace.xml media.xml drm.xml @@ -1636,9 +1636,9 @@ index 2de5b1c..a283086 100644 + kernel interface exported to kernel modules, to track events in + user threads, extract and change user thread state. + - menu "RCU Subsystem" + source "kernel/irq/Kconfig" - choice + menu "RCU Subsystem" diff --git a/kernel/Makefile b/kernel/Makefile index 0b72d1a..6004913 100644 --- a/kernel/Makefile diff --git a/linux-2.6-uvc-autosuspend.patch b/linux-2.6-uvc-autosuspend.patch deleted file mode 100644 index 6c965c62f..000000000 --- a/linux-2.6-uvc-autosuspend.patch +++ /dev/null @@ -1,22 +0,0 @@ -commit 4a3757e0ae269f710292dd75013532c5a57ccb00 -Author: Matthew Garrett -Date: Thu Sep 16 13:38:38 2010 -0400 - - uvc: Enable USB autosuspend by default on uvcvideo - - We've been doing this for a while in Fedora without any complaints. - - Signed-off-by: Matthew Garrett - -diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c -index 8bdd940..28ed5b4 100644 ---- a/drivers/media/video/uvc/uvc_driver.c -+++ b/drivers/media/video/uvc/uvc_driver.c -@@ -1814,6 +1814,7 @@ static int uvc_probe(struct usb_interface *intf, - } - - uvc_trace(UVC_TRACE_PROBE, "UVC device initialized.\n"); -+ usb_enable_autosuspend(udev); - return 0; - - error: diff --git a/netlink-make-nlmsg_find_attr-take-a-const-ptr.patch b/netlink-make-nlmsg_find_attr-take-a-const-ptr.patch deleted file mode 100644 index 5b75ca400..000000000 --- a/netlink-make-nlmsg_find_attr-take-a-const-ptr.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 38f1f0db010ac5b981ae06f1fe2fd64095ebb171 Mon Sep 17 00:00:00 2001 -From: Nelson Elhage -Date: Wed, 3 Nov 2010 16:35:40 +0000 -Subject: [PATCH] netlink: Make nlmsg_find_attr take a const nlmsghdr*. - -This will let us use it on a nlmsghdr stored inside a netlink_callback. - -Signed-off-by: Nelson Elhage -Signed-off-by: David S. Miller ---- - include/net/netlink.h | 2 +- - 1 files changed, 1 insertions(+), 1 deletions(-) - -diff --git a/include/net/netlink.h b/include/net/netlink.h -index a63b219..c344646 100644 ---- a/include/net/netlink.h -+++ b/include/net/netlink.h -@@ -384,7 +384,7 @@ static inline int nlmsg_parse(const struct nlmsghdr *nlh, int hdrlen, - * - * Returns the first attribute which matches the specified type. - */ --static inline struct nlattr *nlmsg_find_attr(struct nlmsghdr *nlh, -+static inline struct nlattr *nlmsg_find_attr(const struct nlmsghdr *nlh, - int hdrlen, int attrtype) - { - return nla_find(nlmsg_attrdata(nlh, hdrlen), --- -1.7.3.2 - diff --git a/pci-crs-fixes.patch b/pci-crs-fixes.patch deleted file mode 100644 index b4fd01502..000000000 --- a/pci-crs-fixes.patch +++ /dev/null @@ -1,593 +0,0 @@ - This revision is to address two problems found by Horst H. von Brand while - testing the v2 patches in Fedora: - https://bugzilla.redhat.com/show_bug.cgi?id=637647 - On his machine, we don't use _CRS by default, and the BIOS left some bridge - windows disabled. - - Problem 1: When we assigned space for the windows, we started at the top - and allocated [mem 0xffffffffffe00000-0xffffffffffffffff], which is - obviously useless because the CPU doesn't support physical addresses that - large. - - Problem 2: Subsequent allocations failed because I made an error in - find_resource(). We look for available space from [child->end + 1 to - root->end], and if the last child ends exactly at 0xffffffffffffffff, we - wrap around and start from zero. - - I made the top-down allocation conditional: an arch can select it at - boot-time, and there's a kernel command line option to change it for - debugging. - - -When we move PCI devices, we currently allocate space bottom-up, i.e., we look -at PCI bus resources in the order we found them, we look at gaps between child -resources bottom-up, and we align the new space at the bottom of an available -region. - -On x86, we move PCI devices more than we used to because we now pay attention -to the PCI host bridge windows from ACPI. For example, when we find a device -that's outside all the known host bridge windows, we try to move it into a -window, and we look for space starting at the bottom. - -Windows does similar device moves, but it looks for space top-down rather than -bottom-up. Since most machines are better-tested with Windows than Linux, this -difference means that Linux is more likely to trip over BIOS bugs in the PCI -host bridge window descriptions than Windows is. - -We've had several reports of Dell machines where the BIOS leaves the AHCI -controller outside the host bridge windows (BIOS bug #1), *and* the lowest -host bridge window includes an area that doesn't actually reach PCI (BIOS -bug #2). The result is that Windows (which moves AHCI to the top of a window) -works fine, while Linux (which moves AHCI to the bottom, buggy, area) doesn't -work. - -These patches change Linux to allocate space more like Windows does: - - 1) The x86 pcibios_align_resource() will choose space from the - end of an available area, not the beginning. - - 2) In the generic allocate_resource() path, we'll look for space - between existing children from the top, not from the bottom. - - 3) When pci_bus_alloc_resource() looks for available space, it - will start from the highest window, not the first one we found. - -This series fixes a 2.6.34 regression that prevents many Dell Precision -workstations from booting: - - https://bugzilla.kernel.org/show_bug.cgi?id=16228 - -Changes from v3 to v4: - - Use round_down() rather than adding ALIGN_DOWN(). - - Replace ARCH_HAS_TOP_DOWN_ALLOC #define with a boot-time architecture - choice and add a "resource_alloc_from_bottom" command line option to - revert to the old behavior (NOTE: this only affects allocate_resource(), - not pcibios_align_resource() or pci_bus_alloc_resource()). - - Fixed find_resource_from_top() again; it still didn't handle a child - that ended at the parent's end correctly. - -Changes from v2 to v3: - - Updated iomem_resource.end to reflect the end of usable physical address - space. Otherwise, we might allocate right up to 0xffffffff_ffffffff, - which isn't usable. - - Make allocate_resource() change conditional on ARCH_HAS_TOP_DOWN_ALLOC. - Without arch-specific changes like the above, it's too dangerous to - make this change for everybody at once. - - Fix 64-bit wraparound in find_resource(). If the last child happened - to end at ~0, we computed the highest available space as [child->end + 1, - root->end], which makes us think the available space started at 0, - which makes us return space that may already be allocated. - -Changes from v1 to v2: - - Moved check for allocating before the available area from - pcibios_align_resource() to find_resource(). Better to do it - after the alignment callback is done, and make it generic. - - Fixed pcibios_align_resource() alignment. If we start from the - end of the available area, we must align *downward*, not upward. - - Fixed pcibios_align_resource() ISA alias avoidance. Again, since - the starting point is the end of the area, we must align downward - when we avoid aliased areas. ---- - -Bjorn Helgaas (6): - resources: ensure alignment callback doesn't allocate below available start - resources: support allocating space within a region from the top down - PCI: allocate bus resources from the top down - x86/PCI: allocate space from the end of a region, not the beginning - x86: update iomem_resource end based on CPU physical address capabilities - x86: allocate space within a region top-down - - - Documentation/kernel-parameters.txt | 5 ++ - arch/x86/kernel/setup.c | 2 + - arch/x86/pci/i386.c | 17 ++++-- - drivers/pci/bus.c | 53 +++++++++++++++++-- - include/linux/ioport.h | 1 - kernel/resource.c | 99 ++++++++++++++++++++++++++++++++++- - 6 files changed, 163 insertions(+), 14 deletions(-) --- -To unsubscribe from this list: send the line "unsubscribe linux-pci" in -the body of a message to majordomo@vger.kernel.org -More majordomo info at http://vger.kernel.org/majordomo-info.html -The alignment callback returns a proposed location, which may have been -adjusted to avoid ISA aliases or for other architecture-specific reasons. -We already had a check ("tmp.start < tmp.end") to make sure the callback -doesn't return a location above the available area. - -This patch adds a check to make sure the callback doesn't return something -*below* the available area, as may happen if the callback tries to allocate -top-down. - -Signed-off-by: Bjorn Helgaas ---- - - kernel/resource.c | 10 ++++++++-- - 1 files changed, 8 insertions(+), 2 deletions(-) - - -diff --git a/kernel/resource.c b/kernel/resource.c -index 7b36976..ace2269 100644 ---- a/kernel/resource.c -+++ b/kernel/resource.c -@@ -371,6 +371,7 @@ static int find_resource(struct resource *root, struct resource *new, - { - struct resource *this = root->child; - struct resource tmp = *new; -+ resource_size_t start; - - tmp.start = root->start; - /* -@@ -391,8 +392,13 @@ static int find_resource(struct resource *root, struct resource *new, - if (tmp.end > max) - tmp.end = max; - tmp.start = ALIGN(tmp.start, align); -- if (alignf) -- tmp.start = alignf(alignf_data, &tmp, size, align); -+ if (alignf) { -+ start = alignf(alignf_data, &tmp, size, align); -+ if (tmp.start <= start && start <= tmp.end) -+ tmp.start = start; -+ else -+ tmp.start = tmp.end; -+ } - if (tmp.start < tmp.end && tmp.end - tmp.start >= size - 1) { - new->start = tmp.start; - new->end = tmp.start + size - 1; - --- -To unsubscribe from this list: send the line "unsubscribe linux-pci" in -the body of a message to majordomo@vger.kernel.org -More majordomo info at http://vger.kernel.org/majordomo-info.html -Allocate space from the top of a region first, then work downward, -if an architecture desires this. - -When we allocate space from a resource, we look for gaps between children -of the resource. Previously, we always looked at gaps from the bottom up. -For example, given this: - - [mem 0xbff00000-0xf7ffffff] PCI Bus 0000:00 - [mem 0xbff00000-0xbfffffff] gap -- available - [mem 0xc0000000-0xdfffffff] PCI Bus 0000:02 - [mem 0xe0000000-0xf7ffffff] gap -- available - -we attempted to allocate from the [mem 0xbff00000-0xbfffffff] gap first, -then the [mem 0xe0000000-0xf7ffffff] gap. - -With this patch an architecture can choose to allocate from the top gap -[mem 0xe0000000-0xf7ffffff] first. - -We can't do this across the board because iomem_resource.end is initialized -to 0xffffffff_ffffffff on 64-bit architectures, and most machines can't -address the entire 64-bit physical address space. Therefore, we only -allocate top-down if the arch requests it by clearing -"resource_alloc_from_bottom". - -Signed-off-by: Bjorn Helgaas ---- - - Documentation/kernel-parameters.txt | 5 ++ - include/linux/ioport.h | 1 - kernel/resource.c | 89 +++++++++++++++++++++++++++++++++++ - 3 files changed, 94 insertions(+), 1 deletions(-) - - -diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt -index 8dd7248..fe50cbd 100644 ---- a/Documentation/kernel-parameters.txt -+++ b/Documentation/kernel-parameters.txt -@@ -2156,6 +2156,11 @@ and is between 256 and 4096 characters. It is defined in the file - reset_devices [KNL] Force drivers to reset the underlying device - during initialization. - -+ resource_alloc_from_bottom -+ Allocate new resources from the beginning of available -+ space, not the end. If you need to use this, please -+ report a bug. -+ - resume= [SWSUSP] - Specify the partition device for software suspend - -diff --git a/include/linux/ioport.h b/include/linux/ioport.h -index b227902..d377ea8 100644 ---- a/include/linux/ioport.h -+++ b/include/linux/ioport.h -@@ -112,6 +112,7 @@ struct resource_list { - /* PC/ISA/whatever - the normal PC address spaces: IO and memory */ - extern struct resource ioport_resource; - extern struct resource iomem_resource; -+extern int resource_alloc_from_bottom; - - extern struct resource *request_resource_conflict(struct resource *root, struct resource *new); - extern int request_resource(struct resource *root, struct resource *new); -diff --git a/kernel/resource.c b/kernel/resource.c -index ace2269..8d337a9 100644 ---- a/kernel/resource.c -+++ b/kernel/resource.c -@@ -40,6 +40,23 @@ EXPORT_SYMBOL(iomem_resource); - - static DEFINE_RWLOCK(resource_lock); - -+/* -+ * By default, we allocate free space bottom-up. The architecture can request -+ * top-down by clearing this flag. The user can override the architecture's -+ * choice with the "resource_alloc_from_bottom" kernel boot option, but that -+ * should only be a debugging tool. -+ */ -+int resource_alloc_from_bottom = 1; -+ -+static __init int setup_alloc_from_bottom(char *s) -+{ -+ printk(KERN_INFO -+ "resource: allocating from bottom-up; please report a bug\n"); -+ resource_alloc_from_bottom = 1; -+ return 0; -+} -+early_param("resource_alloc_from_bottom", setup_alloc_from_bottom); -+ - static void *r_next(struct seq_file *m, void *v, loff_t *pos) - { - struct resource *p = v; -@@ -358,7 +375,74 @@ int __weak page_is_ram(unsigned long pfn) - } - - /* -+ * Find the resource before "child" in the sibling list of "root" children. -+ */ -+static struct resource *find_sibling_prev(struct resource *root, struct resource *child) -+{ -+ struct resource *this; -+ -+ for (this = root->child; this; this = this->sibling) -+ if (this->sibling == child) -+ return this; -+ -+ return NULL; -+} -+ -+/* -+ * Find empty slot in the resource tree given range and alignment. -+ * This version allocates from the end of the root resource first. -+ */ -+static int find_resource_from_top(struct resource *root, struct resource *new, -+ resource_size_t size, resource_size_t min, -+ resource_size_t max, resource_size_t align, -+ resource_size_t (*alignf)(void *, -+ const struct resource *, -+ resource_size_t, -+ resource_size_t), -+ void *alignf_data) -+{ -+ struct resource *this; -+ struct resource tmp = *new; -+ resource_size_t start; -+ -+ tmp.start = root->end; -+ tmp.end = root->end; -+ -+ this = find_sibling_prev(root, NULL); -+ for (;;) { -+ if (this) { -+ if (this->end < root->end) -+ tmp.start = this->end + 1; -+ } else -+ tmp.start = root->start; -+ if (tmp.start < min) -+ tmp.start = min; -+ if (tmp.end > max) -+ tmp.end = max; -+ tmp.start = ALIGN(tmp.start, align); -+ if (alignf) { -+ start = alignf(alignf_data, &tmp, size, align); -+ if (tmp.start <= start && start <= tmp.end) -+ tmp.start = start; -+ else -+ tmp.start = tmp.end; -+ } -+ if (tmp.start < tmp.end && tmp.end - tmp.start >= size - 1) { -+ new->start = tmp.start; -+ new->end = tmp.start + size - 1; -+ return 0; -+ } -+ if (!this || this->start == root->start) -+ break; -+ tmp.end = this->start - 1; -+ this = find_sibling_prev(root, this); -+ } -+ return -EBUSY; -+} -+ -+/* - * Find empty slot in the resource tree given range and alignment. -+ * This version allocates from the beginning of the root resource first. - */ - static int find_resource(struct resource *root, struct resource *new, - resource_size_t size, resource_size_t min, -@@ -435,7 +519,10 @@ int allocate_resource(struct resource *root, struct resource *new, - int err; - - write_lock(&resource_lock); -- err = find_resource(root, new, size, min, max, align, alignf, alignf_data); -+ if (resource_alloc_from_bottom) -+ err = find_resource(root, new, size, min, max, align, alignf, alignf_data); -+ else -+ err = find_resource_from_top(root, new, size, min, max, align, alignf, alignf_data); - if (err >= 0 && __request_resource(root, new)) - err = -EBUSY; - write_unlock(&resource_lock); - --- -To unsubscribe from this list: send the line "unsubscribe linux-pci" in -the body of a message to majordomo@vger.kernel.org -More majordomo info at http://vger.kernel.org/majordomo-info.html -Allocate space from the highest-address PCI bus resource first, then work -downward. - -Previously, we looked for space in PCI host bridge windows in the order -we discovered the windows. For example, given the following windows -(discovered via an ACPI _CRS method): - - pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] - pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000effff] - pci_root PNP0A03:00: host bridge window [mem 0x000f0000-0x000fffff] - pci_root PNP0A03:00: host bridge window [mem 0xbff00000-0xf7ffffff] - pci_root PNP0A03:00: host bridge window [mem 0xff980000-0xff980fff] - pci_root PNP0A03:00: host bridge window [mem 0xff97c000-0xff97ffff] - pci_root PNP0A03:00: host bridge window [mem 0xfed20000-0xfed9ffff] - -we attempted to allocate from [mem 0x000a0000-0x000bffff] first, then -[mem 0x000c0000-0x000effff], and so on. - -With this patch, we allocate from [mem 0xff980000-0xff980fff] first, then -[mem 0xff97c000-0xff97ffff], [mem 0xfed20000-0xfed9ffff], etc. - -Allocating top-down follows Windows practice, so we're less likely to -trip over BIOS defects in the _CRS description. - -On the machine above (a Dell T3500), the [mem 0xbff00000-0xbfffffff] region -doesn't actually work and is likely a BIOS defect. The symptom is that we -move the AHCI controller to 0xbff00000, which leads to "Boot has failed, -sleeping forever," a BUG in ahci_stop_engine(), or some other boot failure. - -Reference: https://bugzilla.kernel.org/show_bug.cgi?id=16228#c43 -Reference: https://bugzilla.redhat.com/show_bug.cgi?id=620313 -Reference: https://bugzilla.redhat.com/show_bug.cgi?id=629933 -Reported-by: Brian Bloniarz -Reported-and-tested-by: Stefan Becker -Reported-by: Denys Vlasenko -Signed-off-by: Bjorn Helgaas ---- - - drivers/pci/bus.c | 53 ++++++++++++++++++++++++++++++++++++++++++++++++----- - 1 files changed, 48 insertions(+), 5 deletions(-) - - -diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c -index 7f0af0e..172bf26 100644 ---- a/drivers/pci/bus.c -+++ b/drivers/pci/bus.c -@@ -64,6 +64,49 @@ void pci_bus_remove_resources(struct pci_bus *bus) - } - } - -+/* -+ * Find the highest-address bus resource below the cursor "res". If the -+ * cursor is NULL, return the highest resource. -+ */ -+static struct resource *pci_bus_find_resource_prev(struct pci_bus *bus, -+ unsigned int type, -+ struct resource *res) -+{ -+ struct resource *r, *prev = NULL; -+ int i; -+ -+ pci_bus_for_each_resource(bus, r, i) { -+ if (!r) -+ continue; -+ -+ if ((r->flags & IORESOURCE_TYPE_BITS) != type) -+ continue; -+ -+ /* If this resource is at or past the cursor, skip it */ -+ if (res) { -+ if (r == res) -+ continue; -+ if (r->end > res->end) -+ continue; -+ if (r->end == res->end && r->start > res->start) -+ continue; -+ } -+ -+ if (!prev) -+ prev = r; -+ -+ /* -+ * A small resource is higher than a large one that ends at -+ * the same address. -+ */ -+ if (r->end > prev->end || -+ (r->end == prev->end && r->start > prev->start)) -+ prev = r; -+ } -+ -+ return prev; -+} -+ - /** - * pci_bus_alloc_resource - allocate a resource from a parent bus - * @bus: PCI bus -@@ -89,9 +132,10 @@ pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, - resource_size_t), - void *alignf_data) - { -- int i, ret = -ENOMEM; -+ int ret = -ENOMEM; - struct resource *r; - resource_size_t max = -1; -+ unsigned int type = res->flags & IORESOURCE_TYPE_BITS; - - type_mask |= IORESOURCE_IO | IORESOURCE_MEM; - -@@ -99,10 +143,9 @@ pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, - if (!(res->flags & IORESOURCE_MEM_64)) - max = PCIBIOS_MAX_MEM_32; - -- pci_bus_for_each_resource(bus, r, i) { -- if (!r) -- continue; -- -+ /* Look for space at highest addresses first */ -+ r = pci_bus_find_resource_prev(bus, type, NULL); -+ for ( ; r; r = pci_bus_find_resource_prev(bus, type, r)) { - /* type_mask must match */ - if ((res->flags ^ r->flags) & type_mask) - continue; - --- -To unsubscribe from this list: send the line "unsubscribe linux-pci" in -the body of a message to majordomo@vger.kernel.org -More majordomo info at http://vger.kernel.org/majordomo-info.html -Allocate from the end of a region, not the beginning. - -For example, if we need to allocate 0x800 bytes for a device on bus -0000:00 given these resources: - - [mem 0xbff00000-0xdfffffff] PCI Bus 0000:00 - [mem 0xc0000000-0xdfffffff] PCI Bus 0000:02 - -the available space at [mem 0xbff00000-0xbfffffff] is passed to the -alignment callback (pcibios_align_resource()). Prior to this patch, we -would put the new 0x800 byte resource at the beginning of that available -space, i.e., at [mem 0xbff00000-0xbff007ff]. - -With this patch, we put it at the end, at [mem 0xbffff800-0xbfffffff]. - -Reference: https://bugzilla.kernel.org/show_bug.cgi?id=16228#c41 -Signed-off-by: Bjorn Helgaas ---- - - arch/x86/pci/i386.c | 17 +++++++++++------ - 1 files changed, 11 insertions(+), 6 deletions(-) - - -diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c -index 5525309..826140a 100644 ---- a/arch/x86/pci/i386.c -+++ b/arch/x86/pci/i386.c -@@ -65,16 +65,21 @@ pcibios_align_resource(void *data, const struct resource *res, - resource_size_t size, resource_size_t align) - { - struct pci_dev *dev = data; -- resource_size_t start = res->start; -+ resource_size_t start = round_down(res->end - size + 1, align); - - if (res->flags & IORESOURCE_IO) { -- if (skip_isa_ioresource_align(dev)) -- return start; -- if (start & 0x300) -- start = (start + 0x3ff) & ~0x3ff; -+ -+ /* -+ * If we're avoiding ISA aliases, the largest contiguous I/O -+ * port space is 256 bytes. Clearing bits 9 and 10 preserves -+ * all 256-byte and smaller alignments, so the result will -+ * still be correctly aligned. -+ */ -+ if (!skip_isa_ioresource_align(dev)) -+ start &= ~0x300; - } else if (res->flags & IORESOURCE_MEM) { - if (start < BIOS_END) -- start = BIOS_END; -+ start = res->end; /* fail; no space */ - } - return start; - } - --- -To unsubscribe from this list: send the line "unsubscribe linux-pci" in -the body of a message to majordomo@vger.kernel.org -More majordomo info at http://vger.kernel.org/majordomo-info.html -The iomem_resource map reflects the available physical address space. -We statically initialize the end to -1, i.e., 0xffffffff_ffffffff, but -of course we can only use as much as the CPU can address. - -This patch updates the end based on the CPU capabilities, so we don't -mistakenly allocate space that isn't usable, as we're likely to do when -allocating from the top-down. - -Signed-off-by: Bjorn Helgaas ---- - - arch/x86/kernel/setup.c | 1 + - 1 files changed, 1 insertions(+), 0 deletions(-) - - -diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c -index c3a4fbb..922b5a1 100644 ---- a/arch/x86/kernel/setup.c -+++ b/arch/x86/kernel/setup.c -@@ -788,6 +788,7 @@ void __init setup_arch(char **cmdline_p) - - x86_init.oem.arch_setup(); - -+ iomem_resource.end = (1ULL << boot_cpu_data.x86_phys_bits) - 1; - setup_memory_map(); - parse_setup_data(); - /* update the e820_saved too */ - --- -To unsubscribe from this list: send the line "unsubscribe linux-pci" in -the body of a message to majordomo@vger.kernel.org -More majordomo info at http://vger.kernel.org/majordomo-info.html -Request that allocate_resource() use available space from high addresses -first, rather than the default of using low addresses first. - -The most common place this makes a difference is when we move or assign -new PCI device resources. Low addresses are generally scarce, so it's -better to use high addresses when possible. This follows Windows practice -for PCI allocation. - -Reference: https://bugzilla.kernel.org/show_bug.cgi?id=16228#c42 -Signed-off-by: Bjorn Helgaas ---- - - arch/x86/kernel/setup.c | 1 + - 1 files changed, 1 insertions(+), 0 deletions(-) - - -diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c -index 922b5a1..0fe76df 100644 ---- a/arch/x86/kernel/setup.c -+++ b/arch/x86/kernel/setup.c -@@ -788,6 +788,7 @@ void __init setup_arch(char **cmdline_p) - - x86_init.oem.arch_setup(); - -+ resource_alloc_from_bottom = 0; - iomem_resource.end = (1ULL << boot_cpu_data.x86_phys_bits) - 1; - setup_memory_map(); - parse_setup_data(); - --- -To unsubscribe from this list: send the line "unsubscribe linux-pci" in -the body of a message to majordomo@vger.kernel.org -More majordomo info at http://vger.kernel.org/majordomo-info.html \ No newline at end of file diff --git a/pnp-log-pnp-resources-as-we-do-for-pci.patch b/pnp-log-pnp-resources-as-we-do-for-pci.patch deleted file mode 100644 index e3b8a2e77..000000000 --- a/pnp-log-pnp-resources-as-we-do-for-pci.patch +++ /dev/null @@ -1,84 +0,0 @@ -From 2d28c74b75ef2900e7016eef29a5ab9a4174b1f0 Mon Sep 17 00:00:00 2001 -From: Bjorn Helgaas -Date: Wed, 29 Sep 2010 12:24:23 -0600 -Subject: PNP: log PNP resources, as we do for PCI - -ACPI devices are often involved in address space conflicts with PCI devices, -so I think it's worth logging the resources they use. Otherwise we have to -depend on lspnp or groping around in sysfs to find them. - -Signed-off-by: Bjorn Helgaas -Signed-off-by: Len Brown ---- - drivers/pnp/core.c | 5 +++-- - drivers/pnp/resource.c | 10 +++++----- - 2 files changed, 8 insertions(+), 7 deletions(-) - -diff --git a/drivers/pnp/core.c b/drivers/pnp/core.c -index 88b3cde..53a8f33 100644 ---- a/drivers/pnp/core.c -+++ b/drivers/pnp/core.c -@@ -194,8 +194,9 @@ int pnp_add_device(struct pnp_dev *dev) - for (id = dev->id; id; id = id->next) - len += scnprintf(buf + len, sizeof(buf) - len, " %s", id->id); - -- pnp_dbg(&dev->dev, "%s device, IDs%s (%s)\n", -- dev->protocol->name, buf, dev->active ? "active" : "disabled"); -+ dev_printk(KERN_DEBUG, &dev->dev, "%s device, IDs%s (%s)\n", -+ dev->protocol->name, buf, -+ dev->active ? "active" : "disabled"); - return 0; - } - -diff --git a/drivers/pnp/resource.c b/drivers/pnp/resource.c -index e3446ab..a925e6b 100644 ---- a/drivers/pnp/resource.c -+++ b/drivers/pnp/resource.c -@@ -523,7 +523,7 @@ struct pnp_resource *pnp_add_irq_resource(struct pnp_dev *dev, int irq, - res->start = irq; - res->end = irq; - -- pnp_dbg(&dev->dev, " add %pr\n", res); -+ dev_printk(KERN_DEBUG, &dev->dev, "%pR\n", res); - return pnp_res; - } - -@@ -544,7 +544,7 @@ struct pnp_resource *pnp_add_dma_resource(struct pnp_dev *dev, int dma, - res->start = dma; - res->end = dma; - -- pnp_dbg(&dev->dev, " add %pr\n", res); -+ dev_printk(KERN_DEBUG, &dev->dev, "%pR\n", res); - return pnp_res; - } - -@@ -568,7 +568,7 @@ struct pnp_resource *pnp_add_io_resource(struct pnp_dev *dev, - res->start = start; - res->end = end; - -- pnp_dbg(&dev->dev, " add %pr\n", res); -+ dev_printk(KERN_DEBUG, &dev->dev, "%pR\n", res); - return pnp_res; - } - -@@ -592,7 +592,7 @@ struct pnp_resource *pnp_add_mem_resource(struct pnp_dev *dev, - res->start = start; - res->end = end; - -- pnp_dbg(&dev->dev, " add %pr\n", res); -+ dev_printk(KERN_DEBUG, &dev->dev, "%pR\n", res); - return pnp_res; - } - -@@ -616,7 +616,7 @@ struct pnp_resource *pnp_add_bus_resource(struct pnp_dev *dev, - res->start = start; - res->end = end; - -- pnp_dbg(&dev->dev, " add %pr\n", res); -+ dev_printk(KERN_DEBUG, &dev->dev, "%pR\n", res); - return pnp_res; - } - --- -1.7.3.2 - diff --git a/posix-cpu-timers-workaround-to-suppress-problems-with-mt-exec.patch b/posix-cpu-timers-workaround-to-suppress-problems-with-mt-exec.patch deleted file mode 100644 index fbc4d7cce..000000000 --- a/posix-cpu-timers-workaround-to-suppress-problems-with-mt-exec.patch +++ /dev/null @@ -1,60 +0,0 @@ -From 78dfb59b62d1a7735cd28fc2783e58c122954fae Mon Sep 17 00:00:00 2001 -From: Oleg Nesterov -Date: Fri, 5 Nov 2010 16:53:42 +0100 -Subject: posix-cpu-timers: workaround to suppress the problems with mt exec - -posix-cpu-timers.c correctly assumes that the dying process does -posix_cpu_timers_exit_group() and removes all !CPUCLOCK_PERTHREAD -timers from signal->cpu_timers list. - -But, it also assumes that timer->it.cpu.task is always the group -leader, and thus the dead ->task means the dead thread group. - -This is obviously not true after de_thread() changes the leader. -After that almost every posix_cpu_timer_ method has problems. - -It is not simple to fix this bug correctly. First of all, I think -that timer->it.cpu should use struct pid instead of task_struct. -Also, the locking should be reworked completely. In particular, -tasklist_lock should not be used at all. This all needs a lot of -nontrivial and hard-to-test changes. - -Change __exit_signal() to do posix_cpu_timers_exit_group() when -the old leader dies during exec. This is not the fix, just the -temporary hack to hide the problem for 2.6.37 and stable. IOW, -this is obviously wrong but this is what we currently have anyway: -cpu timers do not work after mt exec. - -In theory this change adds another race. The exiting leader can -detach the timers which were attached to the new leader. However, -the window between de_thread() and release_task() is small, we -can pretend that sys_timer_create() was called before de_thread(). - -Signed-off-by: Oleg Nesterov -Signed-off-by: Linus Torvalds ---- - kernel/exit.c | 8 ++++++++ - 1 files changed, 8 insertions(+), 0 deletions(-) - -diff --git a/kernel/exit.c b/kernel/exit.c -index 0312022..1eff9e4 100644 ---- a/kernel/exit.c -+++ b/kernel/exit.c -@@ -95,6 +95,14 @@ static void __exit_signal(struct task_struct *tsk) - sig->tty = NULL; - } else { - /* -+ * This can only happen if the caller is de_thread(). -+ * FIXME: this is the temporary hack, we should teach -+ * posix-cpu-timers to handle this case correctly. -+ */ -+ if (unlikely(has_group_leader_pid(tsk))) -+ posix_cpu_timers_exit_group(tsk); -+ -+ /* - * If there is any task waiting for the group exit - * then notify it: - */ --- -1.7.3.2 - diff --git a/runtime_pm_fixups.patch b/runtime_pm_fixups.patch index 6315dc176..789115810 100644 --- a/runtime_pm_fixups.patch +++ b/runtime_pm_fixups.patch @@ -110,5 +110,5 @@ index 4de84ce..284f43c 100644 -int acpi_disable_wakeup_device_power(struct acpi_device *dev); +int acpi_disable_wakeup_device_power(struct acpi_device *dev, int state); - #ifdef CONFIG_PM_SLEEP + #ifdef CONFIG_PM_OPS int acpi_pm_device_sleep_state(struct device *, int *); diff --git a/sources b/sources index df0066685..d52c071f5 100644 --- a/sources +++ b/sources @@ -1,3 +1,3 @@ 61f3739a73afb6914cb007f37fb09b62 linux-2.6.36.tar.bz2 -dd38a6caf08df2822f93541ee95aed7d patch-2.6.36.1.bz2 -33b11b4b8fcd47601a0e1e51586c4b04 patch-2.6.36.2-rc1.bz2 +a84cf559615b5168ec1d5591841601ed patch-2.6.37-rc5.bz2 +dbc90858467e28b39539ad6d3415a956 patch-2.6.37-rc5-git2.bz2 diff --git a/tpm-autodetect-itpm-devices.patch b/tpm-autodetect-itpm-devices.patch deleted file mode 100644 index 57b5d07ed..000000000 --- a/tpm-autodetect-itpm-devices.patch +++ /dev/null @@ -1,65 +0,0 @@ -commit 8cf5102c84dba60b2ea29b7e89f1a65100e20bb9 -Author: Matthew Garrett -Date: Thu Oct 21 17:31:56 2010 -0400 - - tpm: Autodetect itpm devices - - Some Lenovos have TPMs that require a quirk to function correctly. This can - be autodetected by checking whether the device has a _HID of INTC0102. This - is an invalid PNPid, and as such is discarded by the pnp layer - however - it's still present in the ACPI code, so we can pull it out that way. This - means that the quirk won't be automatically applied on non-ACPI systems, - but without ACPI we don't have any way to identify the chip anyway so I - don't think that's a great concern. - - Signed-off-by: Matthew Garrett - -diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c -index 1030f84..c17a305 100644 ---- a/drivers/char/tpm/tpm_tis.c -+++ b/drivers/char/tpm/tpm_tis.c -@@ -25,6 +25,7 @@ - #include - #include - #include -+#include - #include "tpm.h" - - #define TPM_HEADER_SIZE 10 -@@ -78,6 +79,26 @@ enum tis_defaults { - static LIST_HEAD(tis_chips); - static DEFINE_SPINLOCK(tis_lock); - -+#ifdef CONFIG_ACPI -+static int is_itpm(struct pnp_dev *dev) -+{ -+ struct acpi_device *acpi = pnp_acpi_device(dev); -+ struct acpi_hardware_id *id; -+ -+ list_for_each_entry(id, &acpi->pnp.ids, list) { -+ if (!strcmp("INTC0102", id->id)) -+ return 1; -+ } -+ -+ return 0; -+} -+#else -+static int is_itpm(struct pnp_dev *dev) -+{ -+ return 0; -+} -+#endif -+ - static int check_locality(struct tpm_chip *chip, int l) - { - if ((ioread8(chip->vendor.iobase + TPM_ACCESS(l)) & -@@ -472,6 +493,9 @@ static int tpm_tis_init(struct device *dev, resource_size_t start, - "1.2 TPM (device-id 0x%X, rev-id %d)\n", - vendor >> 16, ioread8(chip->vendor.iobase + TPM_RID(0))); - -+ if (is_itpm(to_pnp_dev(dev))) -+ itpm = 1; -+ - if (itpm) - dev_info(dev, "Intel iTPM workaround enabled\n"); - diff --git a/tty-icount-changeover-for-other-main-devices.patch b/tty-icount-changeover-for-other-main-devices.patch deleted file mode 100644 index 9ea0e4566..000000000 --- a/tty-icount-changeover-for-other-main-devices.patch +++ /dev/null @@ -1,980 +0,0 @@ -From 9f13e0aa6e05b9b773f952a435afdc0b4d10e5dc Mon Sep 17 00:00:00 2001 -From: Alan Cox -Date: Thu, 16 Sep 2010 18:21:52 +0100 -Subject: [PATCH 2/2] tty: icount changeover for other main devices - -Again basically cut and paste - -Convert the main driver set to use the hooks for GICOUNT - -Signed-off-by: Alan Cox -Signed-off-by: Greg Kroah-Hartman ---- - arch/ia64/hp/sim/simserial.c | 12 +------ - drivers/char/amiserial.c | 56 ++++++++++++++++------------- - drivers/char/cyclades.c | 49 +++++++++++++------------ - drivers/char/ip2/ip2main.c | 72 ++++++++++++++++++++++--------------- - drivers/char/mxser.c | 62 ++++++++++++++++++-------------- - drivers/char/nozomi.c | 37 +++++++++---------- - drivers/char/pcmcia/synclink_cs.c | 60 ++++++++++++++----------------- - drivers/char/synclink.c | 73 +++++++++++++++++-------------------- - drivers/char/synclink_gt.c | 55 +++++++++++++++------------- - drivers/char/synclinkmp.c | 61 ++++++++++++++----------------- - drivers/serial/68360serial.c | 51 +++++++++++++------------- - net/bluetooth/rfcomm/tty.c | 4 -- - 12 files changed, 297 insertions(+), 295 deletions(-) - -diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c -index 1e8d71a..13633da 100644 ---- a/arch/ia64/hp/sim/simserial.c -+++ b/arch/ia64/hp/sim/simserial.c -@@ -395,7 +395,7 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file, - { - if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && - (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) && -- (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) { -+ (cmd != TIOCMIWAIT)) { - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - } -@@ -433,16 +433,6 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file, - case TIOCMIWAIT: - printk(KERN_INFO "rs_ioctl: TIOCMIWAIT: called\n"); - return 0; -- /* -- * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) -- * Return: write counters to the user passed counter struct -- * NB: both 1->0 and 0->1 transitions are counted except for -- * RI where only 0->1 is counted. -- */ -- case TIOCGICOUNT: -- printk(KERN_INFO "rs_ioctl: TIOCGICOUNT called\n"); -- return 0; -- - case TIOCSERGWILD: - case TIOCSERSWILD: - /* "setserial -W" is called in Debian boot */ -diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c -index a11c8c9..b0a7046 100644 ---- a/drivers/char/amiserial.c -+++ b/drivers/char/amiserial.c -@@ -1263,6 +1263,36 @@ static int rs_break(struct tty_struct *tty, int break_state) - return 0; - } - -+/* -+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) -+ * Return: write counters to the user passed counter struct -+ * NB: both 1->0 and 0->1 transitions are counted except for -+ * RI where only 0->1 is counted. -+ */ -+static int rs_get_icount(struct tty_struct *tty, -+ struct serial_icounter_struct *icount) -+{ -+ struct async_struct *info = tty->driver_data; -+ struct async_icount cnow; -+ unsigned long flags; -+ -+ local_irq_save(flags); -+ cnow = info->state->icount; -+ local_irq_restore(flags); -+ icount->cts = cnow.cts; -+ icount->dsr = cnow.dsr; -+ icount->rng = cnow.rng; -+ icount->dcd = cnow.dcd; -+ icount->rx = cnow.rx; -+ icount->tx = cnow.tx; -+ icount->frame = cnow.frame; -+ icount->overrun = cnow.overrun; -+ icount->parity = cnow.parity; -+ icount->brk = cnow.brk; -+ icount->buf_overrun = cnow.buf_overrun; -+ -+ return 0; -+} - - static int rs_ioctl(struct tty_struct *tty, struct file * file, - unsigned int cmd, unsigned long arg) -@@ -1332,31 +1362,6 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file, - } - /* NOTREACHED */ - -- /* -- * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) -- * Return: write counters to the user passed counter struct -- * NB: both 1->0 and 0->1 transitions are counted except for -- * RI where only 0->1 is counted. -- */ -- case TIOCGICOUNT: -- local_irq_save(flags); -- cnow = info->state->icount; -- local_irq_restore(flags); -- icount.cts = cnow.cts; -- icount.dsr = cnow.dsr; -- icount.rng = cnow.rng; -- icount.dcd = cnow.dcd; -- icount.rx = cnow.rx; -- icount.tx = cnow.tx; -- icount.frame = cnow.frame; -- icount.overrun = cnow.overrun; -- icount.parity = cnow.parity; -- icount.brk = cnow.brk; -- icount.buf_overrun = cnow.buf_overrun; -- -- if (copy_to_user(argp, &icount, sizeof(icount))) -- return -EFAULT; -- return 0; - case TIOCSERGWILD: - case TIOCSERSWILD: - /* "setserial -W" is called in Debian boot */ -@@ -1958,6 +1963,7 @@ static const struct tty_operations serial_ops = { - .wait_until_sent = rs_wait_until_sent, - .tiocmget = rs_tiocmget, - .tiocmset = rs_tiocmset, -+ .get_icount = rs_get_icount, - .proc_fops = &rs_proc_fops, - }; - -diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c -index 27aad94..4f152c2 100644 ---- a/drivers/char/cyclades.c -+++ b/drivers/char/cyclades.c -@@ -2790,29 +2790,6 @@ cy_ioctl(struct tty_struct *tty, struct file *file, - * NB: both 1->0 and 0->1 transitions are counted except for - * RI where only 0->1 is counted. - */ -- case TIOCGICOUNT: { -- struct serial_icounter_struct sic = { }; -- -- spin_lock_irqsave(&info->card->card_lock, flags); -- cnow = info->icount; -- spin_unlock_irqrestore(&info->card->card_lock, flags); -- -- sic.cts = cnow.cts; -- sic.dsr = cnow.dsr; -- sic.rng = cnow.rng; -- sic.dcd = cnow.dcd; -- sic.rx = cnow.rx; -- sic.tx = cnow.tx; -- sic.frame = cnow.frame; -- sic.overrun = cnow.overrun; -- sic.parity = cnow.parity; -- sic.brk = cnow.brk; -- sic.buf_overrun = cnow.buf_overrun; -- -- if (copy_to_user(argp, &sic, sizeof(sic))) -- ret_val = -EFAULT; -- break; -- } - default: - ret_val = -ENOIOCTLCMD; - } -@@ -2823,6 +2800,31 @@ cy_ioctl(struct tty_struct *tty, struct file *file, - return ret_val; - } /* cy_ioctl */ - -+static int cy_get_icount(struct tty_struct *tty, -+ struct serial_icounter_struct *sic) -+{ -+ struct cyclades_port *info = tty->driver_data; -+ struct cyclades_icount cnow; /* Used to snapshot */ -+ unsigned long flags; -+ -+ spin_lock_irqsave(&info->card->card_lock, flags); -+ cnow = info->icount; -+ spin_unlock_irqrestore(&info->card->card_lock, flags); -+ -+ sic->cts = cnow.cts; -+ sic->dsr = cnow.dsr; -+ sic->rng = cnow.rng; -+ sic->dcd = cnow.dcd; -+ sic->rx = cnow.rx; -+ sic->tx = cnow.tx; -+ sic->frame = cnow.frame; -+ sic->overrun = cnow.overrun; -+ sic->parity = cnow.parity; -+ sic->brk = cnow.brk; -+ sic->buf_overrun = cnow.buf_overrun; -+ return 0; -+} -+ - /* - * This routine allows the tty driver to be notified when - * device's termios settings have changed. Note that a -@@ -4084,6 +4086,7 @@ static const struct tty_operations cy_ops = { - .wait_until_sent = cy_wait_until_sent, - .tiocmget = cy_tiocmget, - .tiocmset = cy_tiocmset, -+ .get_icount = cy_get_icount, - .proc_fops = &cyclades_proc_fops, - }; - -diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c -index d4b71e8..438272c 100644 ---- a/drivers/char/ip2/ip2main.c -+++ b/drivers/char/ip2/ip2main.c -@@ -183,6 +183,8 @@ static void ip2_hangup(PTTY); - static int ip2_tiocmget(struct tty_struct *tty, struct file *file); - static int ip2_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear); -+static int ip2_get_icount(struct tty_struct *tty, -+ struct serial_icounter_struct *icount); - - static void set_irq(int, int); - static void ip2_interrupt_bh(struct work_struct *work); -@@ -454,6 +456,7 @@ static const struct tty_operations ip2_ops = { - .hangup = ip2_hangup, - .tiocmget = ip2_tiocmget, - .tiocmset = ip2_tiocmset, -+ .get_icount = ip2_get_icount, - .proc_fops = &ip2_proc_fops, - }; - -@@ -2128,7 +2131,6 @@ ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg ) - i2ChanStrPtr pCh = DevTable[tty->index]; - i2eBordStrPtr pB; - struct async_icount cprev, cnow; /* kernel counter temps */ -- struct serial_icounter_struct __user *p_cuser; - int rc = 0; - unsigned long flags; - void __user *argp = (void __user *)arg; -@@ -2297,34 +2299,6 @@ ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg ) - break; - - /* -- * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) -- * Return: write counters to the user passed counter struct -- * NB: both 1->0 and 0->1 transitions are counted except for RI where -- * only 0->1 is counted. The controller is quite capable of counting -- * both, but this done to preserve compatibility with the standard -- * serial driver. -- */ -- case TIOCGICOUNT: -- ip2trace (CHANN, ITRC_IOCTL, 11, 1, rc ); -- -- write_lock_irqsave(&pB->read_fifo_spinlock, flags); -- cnow = pCh->icount; -- write_unlock_irqrestore(&pB->read_fifo_spinlock, flags); -- p_cuser = argp; -- rc = put_user(cnow.cts, &p_cuser->cts); -- rc = put_user(cnow.dsr, &p_cuser->dsr); -- rc = put_user(cnow.rng, &p_cuser->rng); -- rc = put_user(cnow.dcd, &p_cuser->dcd); -- rc = put_user(cnow.rx, &p_cuser->rx); -- rc = put_user(cnow.tx, &p_cuser->tx); -- rc = put_user(cnow.frame, &p_cuser->frame); -- rc = put_user(cnow.overrun, &p_cuser->overrun); -- rc = put_user(cnow.parity, &p_cuser->parity); -- rc = put_user(cnow.brk, &p_cuser->brk); -- rc = put_user(cnow.buf_overrun, &p_cuser->buf_overrun); -- break; -- -- /* - * The rest are not supported by this driver. By returning -ENOIOCTLCMD they - * will be passed to the line discipline for it to handle. - */ -@@ -2348,6 +2322,46 @@ ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg ) - return rc; - } - -+static int ip2_get_icount(struct tty_struct *tty, -+ struct serial_icounter_struct *icount) -+{ -+ i2ChanStrPtr pCh = DevTable[tty->index]; -+ i2eBordStrPtr pB; -+ struct async_icount cnow; /* kernel counter temp */ -+ unsigned long flags; -+ -+ if ( pCh == NULL ) -+ return -ENODEV; -+ -+ pB = pCh->pMyBord; -+ -+ /* -+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) -+ * Return: write counters to the user passed counter struct -+ * NB: both 1->0 and 0->1 transitions are counted except for RI where -+ * only 0->1 is counted. The controller is quite capable of counting -+ * both, but this done to preserve compatibility with the standard -+ * serial driver. -+ */ -+ -+ write_lock_irqsave(&pB->read_fifo_spinlock, flags); -+ cnow = pCh->icount; -+ write_unlock_irqrestore(&pB->read_fifo_spinlock, flags); -+ -+ icount->cts = cnow.cts; -+ icount->dsr = cnow.dsr; -+ icount->rng = cnow.rng; -+ icount->dcd = cnow.dcd; -+ icount->rx = cnow.rx; -+ icount->tx = cnow.tx; -+ icount->frame = cnow.frame; -+ icount->overrun = cnow.overrun; -+ icount->parity = cnow.parity; -+ icount->brk = cnow.brk; -+ icount->buf_overrun = cnow.buf_overrun; -+ return 0; -+} -+ - /******************************************************************************/ - /* Function: GetSerialInfo() */ - /* Parameters: Pointer to channel structure */ -diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c -index 3fc89da..b3704ae7 100644 ---- a/drivers/char/mxser.c -+++ b/drivers/char/mxser.c -@@ -1700,7 +1700,7 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, - return 0; - } - -- if (cmd != TIOCGSERIAL && cmd != TIOCMIWAIT && cmd != TIOCGICOUNT && -+ if (cmd != TIOCGSERIAL && cmd != TIOCMIWAIT && - test_bit(TTY_IO_ERROR, &tty->flags)) - return -EIO; - -@@ -1730,32 +1730,6 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, - - return wait_event_interruptible(info->port.delta_msr_wait, - mxser_cflags_changed(info, arg, &cnow)); -- /* -- * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) -- * Return: write counters to the user passed counter struct -- * NB: both 1->0 and 0->1 transitions are counted except for -- * RI where only 0->1 is counted. -- */ -- case TIOCGICOUNT: { -- struct serial_icounter_struct icnt = { 0 }; -- spin_lock_irqsave(&info->slock, flags); -- cnow = info->icount; -- spin_unlock_irqrestore(&info->slock, flags); -- -- icnt.frame = cnow.frame; -- icnt.brk = cnow.brk; -- icnt.overrun = cnow.overrun; -- icnt.buf_overrun = cnow.buf_overrun; -- icnt.parity = cnow.parity; -- icnt.rx = cnow.rx; -- icnt.tx = cnow.tx; -- icnt.cts = cnow.cts; -- icnt.dsr = cnow.dsr; -- icnt.rng = cnow.rng; -- icnt.dcd = cnow.dcd; -- -- return copy_to_user(argp, &icnt, sizeof(icnt)) ? -EFAULT : 0; -- } - case MOXA_HighSpeedOn: - return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp); - case MOXA_SDS_RSTICOUNTER: -@@ -1828,6 +1802,39 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, - return 0; - } - -+ /* -+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) -+ * Return: write counters to the user passed counter struct -+ * NB: both 1->0 and 0->1 transitions are counted except for -+ * RI where only 0->1 is counted. -+ */ -+ -+static int mxser_get_icount(struct tty_struct *tty, -+ struct serial_icounter_struct *icount) -+ -+{ -+ struct mxser_port *info = tty->driver_data; -+ struct async_icount cnow; -+ unsigned long flags; -+ -+ spin_lock_irqsave(&info->slock, flags); -+ cnow = info->icount; -+ spin_unlock_irqrestore(&info->slock, flags); -+ -+ icount->frame = cnow.frame; -+ icount->brk = cnow.brk; -+ icount->overrun = cnow.overrun; -+ icount->buf_overrun = cnow.buf_overrun; -+ icount->parity = cnow.parity; -+ icount->rx = cnow.rx; -+ icount->tx = cnow.tx; -+ icount->cts = cnow.cts; -+ icount->dsr = cnow.dsr; -+ icount->rng = cnow.rng; -+ icount->dcd = cnow.dcd; -+ return 0; -+} -+ - static void mxser_stoprx(struct tty_struct *tty) - { - struct mxser_port *info = tty->driver_data; -@@ -2326,6 +2333,7 @@ static const struct tty_operations mxser_ops = { - .wait_until_sent = mxser_wait_until_sent, - .tiocmget = mxser_tiocmget, - .tiocmset = mxser_tiocmset, -+ .get_icount = mxser_get_icount, - }; - - struct tty_port_operations mxser_port_ops = { -diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c -index 817169c..dd3f9b1 100644 ---- a/drivers/char/nozomi.c -+++ b/drivers/char/nozomi.c -@@ -1804,24 +1804,24 @@ static int ntty_cflags_changed(struct port *port, unsigned long flags, - return ret; - } - --static int ntty_ioctl_tiocgicount(struct port *port, void __user *argp) -+static int ntty_tiocgicount(struct tty_struct *tty, -+ struct serial_icounter_struct *icount) - { -+ struct port *port = tty->driver_data; - const struct async_icount cnow = port->tty_icount; -- struct serial_icounter_struct icount; -- -- icount.cts = cnow.cts; -- icount.dsr = cnow.dsr; -- icount.rng = cnow.rng; -- icount.dcd = cnow.dcd; -- icount.rx = cnow.rx; -- icount.tx = cnow.tx; -- icount.frame = cnow.frame; -- icount.overrun = cnow.overrun; -- icount.parity = cnow.parity; -- icount.brk = cnow.brk; -- icount.buf_overrun = cnow.buf_overrun; -- -- return copy_to_user(argp, &icount, sizeof(icount)) ? -EFAULT : 0; -+ -+ icount->cts = cnow.cts; -+ icount->dsr = cnow.dsr; -+ icount->rng = cnow.rng; -+ icount->dcd = cnow.dcd; -+ icount->rx = cnow.rx; -+ icount->tx = cnow.tx; -+ icount->frame = cnow.frame; -+ icount->overrun = cnow.overrun; -+ icount->parity = cnow.parity; -+ icount->brk = cnow.brk; -+ icount->buf_overrun = cnow.buf_overrun; -+ return 0; - } - - static int ntty_ioctl(struct tty_struct *tty, struct file *file, -@@ -1840,9 +1840,7 @@ static int ntty_ioctl(struct tty_struct *tty, struct file *file, - rval = wait_event_interruptible(port->tty_wait, - ntty_cflags_changed(port, arg, &cprev)); - break; -- } case TIOCGICOUNT: -- rval = ntty_ioctl_tiocgicount(port, argp); -- break; -+ } - default: - DBG1("ERR: 0x%08X, %d", cmd, cmd); - break; -@@ -1922,6 +1920,7 @@ static const struct tty_operations tty_ops = { - .chars_in_buffer = ntty_chars_in_buffer, - .tiocmget = ntty_tiocmget, - .tiocmset = ntty_tiocmset, -+ .get_icount = ntty_tiocgicount, - .install = ntty_install, - .cleanup = ntty_cleanup, - }; -diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c -index 45f9fad..7404809 100644 ---- a/drivers/char/pcmcia/synclink_cs.c -+++ b/drivers/char/pcmcia/synclink_cs.c -@@ -2215,6 +2215,32 @@ static int mgslpc_break(struct tty_struct *tty, int break_state) - return 0; - } - -+static int mgslpc_get_icount(struct tty_struct *tty, -+ struct serial_icounter_struct *icount) -+{ -+ MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data; -+ struct mgsl_icount cnow; /* kernel counter temps */ -+ unsigned long flags; -+ -+ spin_lock_irqsave(&info->lock,flags); -+ cnow = info->icount; -+ spin_unlock_irqrestore(&info->lock,flags); -+ -+ icount->cts = cnow.cts; -+ icount->dsr = cnow.dsr; -+ icount->rng = cnow.rng; -+ icount->dcd = cnow.dcd; -+ icount->rx = cnow.rx; -+ icount->tx = cnow.tx; -+ icount->frame = cnow.frame; -+ icount->overrun = cnow.overrun; -+ icount->parity = cnow.parity; -+ icount->brk = cnow.brk; -+ icount->buf_overrun = cnow.buf_overrun; -+ -+ return 0; -+} -+ - /* Service an IOCTL request - * - * Arguments: -@@ -2230,11 +2256,7 @@ static int mgslpc_ioctl(struct tty_struct *tty, struct file * file, - unsigned int cmd, unsigned long arg) - { - MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data; -- int error; -- struct mgsl_icount cnow; /* kernel counter temps */ -- struct serial_icounter_struct __user *p_cuser; /* user space */ - void __user *argp = (void __user *)arg; -- unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgslpc_ioctl %s cmd=%08X\n", __FILE__,__LINE__, -@@ -2244,7 +2266,7 @@ static int mgslpc_ioctl(struct tty_struct *tty, struct file * file, - return -ENODEV; - - if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && -- (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) { -+ (cmd != TIOCMIWAIT)) { - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - } -@@ -2274,34 +2296,6 @@ static int mgslpc_ioctl(struct tty_struct *tty, struct file * file, - return wait_events(info, argp); - case TIOCMIWAIT: - return modem_input_wait(info,(int)arg); -- case TIOCGICOUNT: -- spin_lock_irqsave(&info->lock,flags); -- cnow = info->icount; -- spin_unlock_irqrestore(&info->lock,flags); -- p_cuser = argp; -- PUT_USER(error,cnow.cts, &p_cuser->cts); -- if (error) return error; -- PUT_USER(error,cnow.dsr, &p_cuser->dsr); -- if (error) return error; -- PUT_USER(error,cnow.rng, &p_cuser->rng); -- if (error) return error; -- PUT_USER(error,cnow.dcd, &p_cuser->dcd); -- if (error) return error; -- PUT_USER(error,cnow.rx, &p_cuser->rx); -- if (error) return error; -- PUT_USER(error,cnow.tx, &p_cuser->tx); -- if (error) return error; -- PUT_USER(error,cnow.frame, &p_cuser->frame); -- if (error) return error; -- PUT_USER(error,cnow.overrun, &p_cuser->overrun); -- if (error) return error; -- PUT_USER(error,cnow.parity, &p_cuser->parity); -- if (error) return error; -- PUT_USER(error,cnow.brk, &p_cuser->brk); -- if (error) return error; -- PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun); -- if (error) return error; -- return 0; - default: - return -ENOIOCTLCMD; - } -diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c -index a2a5800..3a6824f 100644 ---- a/drivers/char/synclink.c -+++ b/drivers/char/synclink.c -@@ -2925,6 +2925,38 @@ static int mgsl_break(struct tty_struct *tty, int break_state) - - } /* end of mgsl_break() */ - -+/* -+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) -+ * Return: write counters to the user passed counter struct -+ * NB: both 1->0 and 0->1 transitions are counted except for -+ * RI where only 0->1 is counted. -+ */ -+static int msgl_get_icount(struct tty_struct *tty, -+ struct serial_icounter_struct *icount) -+ -+{ -+ struct mgsl_struct * info = tty->driver_data; -+ struct mgsl_icount cnow; /* kernel counter temps */ -+ unsigned long flags; -+ -+ spin_lock_irqsave(&info->irq_spinlock,flags); -+ cnow = info->icount; -+ spin_unlock_irqrestore(&info->irq_spinlock,flags); -+ -+ icount->cts = cnow.cts; -+ icount->dsr = cnow.dsr; -+ icount->rng = cnow.rng; -+ icount->dcd = cnow.dcd; -+ icount->rx = cnow.rx; -+ icount->tx = cnow.tx; -+ icount->frame = cnow.frame; -+ icount->overrun = cnow.overrun; -+ icount->parity = cnow.parity; -+ icount->brk = cnow.brk; -+ icount->buf_overrun = cnow.buf_overrun; -+ return 0; -+} -+ - /* mgsl_ioctl() Service an IOCTL request - * - * Arguments: -@@ -2949,7 +2981,7 @@ static int mgsl_ioctl(struct tty_struct *tty, struct file * file, - return -ENODEV; - - if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && -- (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) { -+ (cmd != TIOCMIWAIT)) { - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - } -@@ -2959,11 +2991,7 @@ static int mgsl_ioctl(struct tty_struct *tty, struct file * file, - - static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg) - { -- int error; -- struct mgsl_icount cnow; /* kernel counter temps */ - void __user *argp = (void __user *)arg; -- struct serial_icounter_struct __user *p_cuser; /* user space */ -- unsigned long flags; - - switch (cmd) { - case MGSL_IOCGPARAMS: -@@ -2992,40 +3020,6 @@ static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigne - case TIOCMIWAIT: - return modem_input_wait(info,(int)arg); - -- /* -- * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) -- * Return: write counters to the user passed counter struct -- * NB: both 1->0 and 0->1 transitions are counted except for -- * RI where only 0->1 is counted. -- */ -- case TIOCGICOUNT: -- spin_lock_irqsave(&info->irq_spinlock,flags); -- cnow = info->icount; -- spin_unlock_irqrestore(&info->irq_spinlock,flags); -- p_cuser = argp; -- PUT_USER(error,cnow.cts, &p_cuser->cts); -- if (error) return error; -- PUT_USER(error,cnow.dsr, &p_cuser->dsr); -- if (error) return error; -- PUT_USER(error,cnow.rng, &p_cuser->rng); -- if (error) return error; -- PUT_USER(error,cnow.dcd, &p_cuser->dcd); -- if (error) return error; -- PUT_USER(error,cnow.rx, &p_cuser->rx); -- if (error) return error; -- PUT_USER(error,cnow.tx, &p_cuser->tx); -- if (error) return error; -- PUT_USER(error,cnow.frame, &p_cuser->frame); -- if (error) return error; -- PUT_USER(error,cnow.overrun, &p_cuser->overrun); -- if (error) return error; -- PUT_USER(error,cnow.parity, &p_cuser->parity); -- if (error) return error; -- PUT_USER(error,cnow.brk, &p_cuser->brk); -- if (error) return error; -- PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun); -- if (error) return error; -- return 0; - default: - return -ENOIOCTLCMD; - } -@@ -4328,6 +4322,7 @@ static const struct tty_operations mgsl_ops = { - .hangup = mgsl_hangup, - .tiocmget = tiocmget, - .tiocmset = tiocmset, -+ .get_icount = msgl_get_icount, - .proc_fops = &mgsl_proc_fops, - }; - -diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c -index e63b830..1746d91 100644 ---- a/drivers/char/synclink_gt.c -+++ b/drivers/char/synclink_gt.c -@@ -1032,9 +1032,6 @@ static int ioctl(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg) - { - struct slgt_info *info = tty->driver_data; -- struct mgsl_icount cnow; /* kernel counter temps */ -- struct serial_icounter_struct __user *p_cuser; /* user space */ -- unsigned long flags; - void __user *argp = (void __user *)arg; - int ret; - -@@ -1043,7 +1040,7 @@ static int ioctl(struct tty_struct *tty, struct file *file, - DBGINFO(("%s ioctl() cmd=%08X\n", info->device_name, cmd)); - - if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && -- (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) { -+ (cmd != TIOCMIWAIT)) { - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - } -@@ -1053,24 +1050,6 @@ static int ioctl(struct tty_struct *tty, struct file *file, - return wait_mgsl_event(info, argp); - case TIOCMIWAIT: - return modem_input_wait(info,(int)arg); -- case TIOCGICOUNT: -- spin_lock_irqsave(&info->lock,flags); -- cnow = info->icount; -- spin_unlock_irqrestore(&info->lock,flags); -- p_cuser = argp; -- if (put_user(cnow.cts, &p_cuser->cts) || -- put_user(cnow.dsr, &p_cuser->dsr) || -- put_user(cnow.rng, &p_cuser->rng) || -- put_user(cnow.dcd, &p_cuser->dcd) || -- put_user(cnow.rx, &p_cuser->rx) || -- put_user(cnow.tx, &p_cuser->tx) || -- put_user(cnow.frame, &p_cuser->frame) || -- put_user(cnow.overrun, &p_cuser->overrun) || -- put_user(cnow.parity, &p_cuser->parity) || -- put_user(cnow.brk, &p_cuser->brk) || -- put_user(cnow.buf_overrun, &p_cuser->buf_overrun)) -- return -EFAULT; -- return 0; - case MGSL_IOCSGPIO: - return set_gpio(info, argp); - case MGSL_IOCGGPIO: -@@ -1117,6 +1096,33 @@ static int ioctl(struct tty_struct *tty, struct file *file, - return ret; - } - -+static int get_icount(struct tty_struct *tty, -+ struct serial_icounter_struct *icount) -+ -+{ -+ struct slgt_info *info = tty->driver_data; -+ struct mgsl_icount cnow; /* kernel counter temps */ -+ unsigned long flags; -+ -+ spin_lock_irqsave(&info->lock,flags); -+ cnow = info->icount; -+ spin_unlock_irqrestore(&info->lock,flags); -+ -+ icount->cts = cnow.cts; -+ icount->dsr = cnow.dsr; -+ icount->rng = cnow.rng; -+ icount->dcd = cnow.dcd; -+ icount->rx = cnow.rx; -+ icount->tx = cnow.tx; -+ icount->frame = cnow.frame; -+ icount->overrun = cnow.overrun; -+ icount->parity = cnow.parity; -+ icount->brk = cnow.brk; -+ icount->buf_overrun = cnow.buf_overrun; -+ -+ return 0; -+} -+ - /* - * support for 32 bit ioctl calls on 64 bit systems - */ -@@ -1206,10 +1212,6 @@ static long slgt_compat_ioctl(struct tty_struct *tty, struct file *file, - case MGSL_IOCSGPIO: - case MGSL_IOCGGPIO: - case MGSL_IOCWAITGPIO: -- case TIOCGICOUNT: -- rc = ioctl(tty, file, cmd, (unsigned long)(compat_ptr(arg))); -- break; -- - case MGSL_IOCSTXIDLE: - case MGSL_IOCTXENABLE: - case MGSL_IOCRXENABLE: -@@ -3642,6 +3644,7 @@ static const struct tty_operations ops = { - .hangup = hangup, - .tiocmget = tiocmget, - .tiocmset = tiocmset, -+ .get_icount = get_icount, - .proc_fops = &synclink_gt_proc_fops, - }; - -diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c -index e56caf7..2f9eb4b 100644 ---- a/drivers/char/synclinkmp.c -+++ b/drivers/char/synclinkmp.c -@@ -1258,10 +1258,6 @@ static int ioctl(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg) - { - SLMP_INFO *info = tty->driver_data; -- int error; -- struct mgsl_icount cnow; /* kernel counter temps */ -- struct serial_icounter_struct __user *p_cuser; /* user space */ -- unsigned long flags; - void __user *argp = (void __user *)arg; - - if (debug_level >= DEBUG_LEVEL_INFO) -@@ -1272,7 +1268,7 @@ static int ioctl(struct tty_struct *tty, struct file *file, - return -ENODEV; - - if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && -- (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) { -+ (cmd != TIOCMIWAIT)) { - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - } -@@ -1310,40 +1306,38 @@ static int ioctl(struct tty_struct *tty, struct file *file, - * NB: both 1->0 and 0->1 transitions are counted except for - * RI where only 0->1 is counted. - */ -- case TIOCGICOUNT: -- spin_lock_irqsave(&info->lock,flags); -- cnow = info->icount; -- spin_unlock_irqrestore(&info->lock,flags); -- p_cuser = argp; -- PUT_USER(error,cnow.cts, &p_cuser->cts); -- if (error) return error; -- PUT_USER(error,cnow.dsr, &p_cuser->dsr); -- if (error) return error; -- PUT_USER(error,cnow.rng, &p_cuser->rng); -- if (error) return error; -- PUT_USER(error,cnow.dcd, &p_cuser->dcd); -- if (error) return error; -- PUT_USER(error,cnow.rx, &p_cuser->rx); -- if (error) return error; -- PUT_USER(error,cnow.tx, &p_cuser->tx); -- if (error) return error; -- PUT_USER(error,cnow.frame, &p_cuser->frame); -- if (error) return error; -- PUT_USER(error,cnow.overrun, &p_cuser->overrun); -- if (error) return error; -- PUT_USER(error,cnow.parity, &p_cuser->parity); -- if (error) return error; -- PUT_USER(error,cnow.brk, &p_cuser->brk); -- if (error) return error; -- PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun); -- if (error) return error; -- return 0; - default: - return -ENOIOCTLCMD; - } - return 0; - } - -+static int get_icount(struct tty_struct *tty, -+ struct serial_icounter_struct *icount) -+{ -+ SLMP_INFO *info = tty->driver_data; -+ struct mgsl_icount cnow; /* kernel counter temps */ -+ unsigned long flags; -+ -+ spin_lock_irqsave(&info->lock,flags); -+ cnow = info->icount; -+ spin_unlock_irqrestore(&info->lock,flags); -+ -+ icount->cts = cnow.cts; -+ icount->dsr = cnow.dsr; -+ icount->rng = cnow.rng; -+ icount->dcd = cnow.dcd; -+ icount->rx = cnow.rx; -+ icount->tx = cnow.tx; -+ icount->frame = cnow.frame; -+ icount->overrun = cnow.overrun; -+ icount->parity = cnow.parity; -+ icount->brk = cnow.brk; -+ icount->buf_overrun = cnow.buf_overrun; -+ -+ return 0; -+} -+ - /* - * /proc fs routines.... - */ -@@ -3909,6 +3903,7 @@ static const struct tty_operations ops = { - .hangup = hangup, - .tiocmget = tiocmget, - .tiocmset = tiocmset, -+ .get_icount = get_icount, - .proc_fops = &synclinkmp_proc_fops, - }; - -diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c -index 0dff3bb..88b1335 100644 ---- a/drivers/serial/68360serial.c -+++ b/drivers/serial/68360serial.c -@@ -1381,6 +1381,30 @@ static void send_break(ser_info_t *info, unsigned int duration) - } - - -+/* -+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) -+ * Return: write counters to the user passed counter struct -+ * NB: both 1->0 and 0->1 transitions are counted except for -+ * RI where only 0->1 is counted. -+ */ -+static int rs_360_get_icount(struct tty_struct *tty, -+ struct serial_icounter_struct *icount) -+{ -+ ser_info_t *info = (ser_info_t *)tty->driver_data; -+ struct async_icount cnow; -+ -+ local_irq_disable(); -+ cnow = info->state->icount; -+ local_irq_enable(); -+ -+ icount->cts = cnow.cts; -+ icount->dsr = cnow.dsr; -+ icount->rng = cnow.rng; -+ icount->dcd = cnow.dcd; -+ -+ return 0; -+} -+ - static int rs_360_ioctl(struct tty_struct *tty, struct file * file, - unsigned int cmd, unsigned long arg) - { -@@ -1394,7 +1418,7 @@ static int rs_360_ioctl(struct tty_struct *tty, struct file * file, - if (serial_paranoia_check(info, tty->name, "rs_ioctl")) - return -ENODEV; - -- if ((cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) { -+ if (cmd != TIOCMIWAIT) { - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - } -@@ -1477,31 +1501,6 @@ static int rs_360_ioctl(struct tty_struct *tty, struct file * file, - return 0; - #endif - -- /* -- * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) -- * Return: write counters to the user passed counter struct -- * NB: both 1->0 and 0->1 transitions are counted except for -- * RI where only 0->1 is counted. -- */ -- case TIOCGICOUNT: -- local_irq_disable(); -- cnow = info->state->icount; -- local_irq_enable(); -- p_cuser = (struct serial_icounter_struct *) arg; --/* error = put_user(cnow.cts, &p_cuser->cts); */ --/* if (error) return error; */ --/* error = put_user(cnow.dsr, &p_cuser->dsr); */ --/* if (error) return error; */ --/* error = put_user(cnow.rng, &p_cuser->rng); */ --/* if (error) return error; */ --/* error = put_user(cnow.dcd, &p_cuser->dcd); */ --/* if (error) return error; */ -- -- put_user(cnow.cts, &p_cuser->cts); -- put_user(cnow.dsr, &p_cuser->dsr); -- put_user(cnow.rng, &p_cuser->rng); -- put_user(cnow.dcd, &p_cuser->dcd); -- return 0; - - default: - return -ENOIOCTLCMD; -diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c -index befc3a5..84c2a4d 100644 ---- a/net/bluetooth/rfcomm/tty.c -+++ b/net/bluetooth/rfcomm/tty.c -@@ -844,10 +844,6 @@ static int rfcomm_tty_ioctl(struct tty_struct *tty, struct file *filp, unsigned - BT_DBG("TIOCMIWAIT"); - break; - -- case TIOCGICOUNT: -- BT_DBG("TIOCGICOUNT"); -- break; -- - case TIOCGSERIAL: - BT_ERR("TIOCGSERIAL is not supported"); - return -ENOIOCTLCMD; --- -1.7.3.2 - diff --git a/tty-make-tiocgicount-a-handler.patch b/tty-make-tiocgicount-a-handler.patch deleted file mode 100644 index fb88aea7d..000000000 --- a/tty-make-tiocgicount-a-handler.patch +++ /dev/null @@ -1,218 +0,0 @@ -From e2047e3ffc61042a3228cd4228cd95ab0dad1d72 Mon Sep 17 00:00:00 2001 -From: Alan Cox -Date: Thu, 16 Sep 2010 18:21:24 +0100 -Subject: [PATCH 1/2] tty: Make tiocgicount a handler - -Dan Rosenberg noted that various drivers return the struct with uncleared -fields. Instead of spending forever trying to stomp all the drivers that -get it wrong (and every new driver) do the job in one place. - -This first patch adds the needed operations and hooks them up, including -the needed USB midlayer and serial core plumbing. - -Signed-off-by: Alan Cox -Signed-off-by: Greg Kroah-Hartman ---- - drivers/char/tty_io.c | 21 +++++++++++++++++++++ - drivers/serial/serial_core.c | 37 +++++++++++++++++-------------------- - drivers/usb/serial/usb-serial.c | 13 +++++++++++++ - include/linux/tty_driver.h | 9 +++++++++ - include/linux/usb/serial.h | 2 ++ - 5 files changed, 62 insertions(+), 20 deletions(-) - -diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c -index 613c852..68d7713 100644 ---- a/drivers/char/tty_io.c -+++ b/drivers/char/tty_io.c -@@ -96,6 +96,7 @@ - #include - #include - #include -+#include - - #include - #include -@@ -2502,6 +2503,20 @@ static int tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int - return tty->ops->tiocmset(tty, file, set, clear); - } - -+static int tty_tiocgicount(struct tty_struct *tty, void __user *arg) -+{ -+ int retval = -EINVAL; -+ struct serial_icounter_struct icount; -+ memset(&icount, 0, sizeof(icount)); -+ if (tty->ops->get_icount) -+ retval = tty->ops->get_icount(tty, &icount); -+ if (retval != 0) -+ return retval; -+ if (copy_to_user(arg, &icount, sizeof(icount))) -+ return -EFAULT; -+ return 0; -+} -+ - struct tty_struct *tty_pair_get_tty(struct tty_struct *tty) - { - if (tty->driver->type == TTY_DRIVER_TYPE_PTY && -@@ -2622,6 +2637,12 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg) - case TIOCMBIC: - case TIOCMBIS: - return tty_tiocmset(tty, file, cmd, p); -+ case TIOCGICOUNT: -+ retval = tty_tiocgicount(tty, p); -+ /* For the moment allow fall through to the old method */ -+ if (retval != -EINVAL) -+ return retval; -+ break; - case TCFLSH: - switch (arg) { - case TCIFLUSH: -diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c -index cd85112..2ee0aec 100644 ---- a/drivers/serial/serial_core.c -+++ b/drivers/serial/serial_core.c -@@ -1074,10 +1074,10 @@ uart_wait_modem_status(struct uart_state *state, unsigned long arg) - * NB: both 1->0 and 0->1 transitions are counted except for - * RI where only 0->1 is counted. - */ --static int uart_get_count(struct uart_state *state, -- struct serial_icounter_struct __user *icnt) -+static int uart_get_icount(struct tty_struct *tty, -+ struct serial_icounter_struct *icount) - { -- struct serial_icounter_struct icount; -+ struct uart_state *state = tty->driver_data; - struct uart_icount cnow; - struct uart_port *uport = state->uart_port; - -@@ -1085,19 +1085,19 @@ static int uart_get_count(struct uart_state *state, - memcpy(&cnow, &uport->icount, sizeof(struct uart_icount)); - spin_unlock_irq(&uport->lock); - -- icount.cts = cnow.cts; -- icount.dsr = cnow.dsr; -- icount.rng = cnow.rng; -- icount.dcd = cnow.dcd; -- icount.rx = cnow.rx; -- icount.tx = cnow.tx; -- icount.frame = cnow.frame; -- icount.overrun = cnow.overrun; -- icount.parity = cnow.parity; -- icount.brk = cnow.brk; -- icount.buf_overrun = cnow.buf_overrun; -+ icount->cts = cnow.cts; -+ icount->dsr = cnow.dsr; -+ icount->rng = cnow.rng; -+ icount->dcd = cnow.dcd; -+ icount->rx = cnow.rx; -+ icount->tx = cnow.tx; -+ icount->frame = cnow.frame; -+ icount->overrun = cnow.overrun; -+ icount->parity = cnow.parity; -+ icount->brk = cnow.brk; -+ icount->buf_overrun = cnow.buf_overrun; - -- return copy_to_user(icnt, &icount, sizeof(icount)) ? -EFAULT : 0; -+ return 0; - } - - /* -@@ -1150,10 +1150,6 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd, - case TIOCMIWAIT: - ret = uart_wait_modem_status(state, arg); - break; -- -- case TIOCGICOUNT: -- ret = uart_get_count(state, uarg); -- break; - } - - if (ret != -ENOIOCTLCMD) -@@ -2283,6 +2279,7 @@ static const struct tty_operations uart_ops = { - #endif - .tiocmget = uart_tiocmget, - .tiocmset = uart_tiocmset, -+ .get_icount = uart_get_icount, - #ifdef CONFIG_CONSOLE_POLL - .poll_init = uart_poll_init, - .poll_get_char = uart_poll_get_char, -diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c -index 7a2177c..e64da74 100644 ---- a/drivers/usb/serial/usb-serial.c -+++ b/drivers/usb/serial/usb-serial.c -@@ -519,6 +519,18 @@ static int serial_tiocmset(struct tty_struct *tty, struct file *file, - return -EINVAL; - } - -+static int serial_get_icount(struct tty_struct *tty, -+ struct serial_icounter_struct *icount) -+{ -+ struct usb_serial_port *port = tty->driver_data; -+ -+ dbg("%s - port %d", __func__, port->number); -+ -+ if (port->serial->type->get_icount) -+ return port->serial->type->get_icount(tty, icount); -+ return -EINVAL; -+} -+ - /* - * We would be calling tty_wakeup here, but unfortunately some line - * disciplines have an annoying habit of calling tty->write from -@@ -1195,6 +1207,7 @@ static const struct tty_operations serial_ops = { - .chars_in_buffer = serial_chars_in_buffer, - .tiocmget = serial_tiocmget, - .tiocmset = serial_tiocmset, -+ .get_icount = serial_get_icount, - .cleanup = serial_cleanup, - .install = serial_install, - .proc_fops = &serial_proc_fops, -diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h -index b086779..db2d227 100644 ---- a/include/linux/tty_driver.h -+++ b/include/linux/tty_driver.h -@@ -224,6 +224,12 @@ - * unless the tty also has a valid tty->termiox pointer. - * - * Optional: Called under the termios lock -+ * -+ * int (*get_icount)(struct tty_struct *tty, struct serial_icounter *icount); -+ * -+ * Called when the device receives a TIOCGICOUNT ioctl. Passed a kernel -+ * structure to complete. This method is optional and will only be called -+ * if provided (otherwise EINVAL will be returned). - */ - - #include -@@ -232,6 +238,7 @@ - - struct tty_struct; - struct tty_driver; -+struct serial_icounter_struct; - - struct tty_operations { - struct tty_struct * (*lookup)(struct tty_driver *driver, -@@ -268,6 +275,8 @@ struct tty_operations { - unsigned int set, unsigned int clear); - int (*resize)(struct tty_struct *tty, struct winsize *ws); - int (*set_termiox)(struct tty_struct *tty, struct termiox *tnew); -+ int (*get_icount)(struct tty_struct *tty, -+ struct serial_icounter_struct *icount); - #ifdef CONFIG_CONSOLE_POLL - int (*poll_init)(struct tty_driver *driver, int line, char *options); - int (*poll_get_char)(struct tty_driver *driver, int line); -diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h -index 55675b1..16d682f 100644 ---- a/include/linux/usb/serial.h -+++ b/include/linux/usb/serial.h -@@ -271,6 +271,8 @@ struct usb_serial_driver { - int (*tiocmget)(struct tty_struct *tty, struct file *file); - int (*tiocmset)(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear); -+ int (*get_icount)(struct tty_struct *tty, -+ struct serial_icounter_struct *icount); - /* Called by the tty layer for port level work. There may or may not - be an attached tty at this point */ - void (*dtr_rts)(struct usb_serial_port *port, int on); --- -1.7.3.2 - diff --git a/wacom-01-add-fuzz-parameters-to-features.patch b/wacom-01-add-fuzz-parameters-to-features.patch deleted file mode 100644 index 4162726d3..000000000 --- a/wacom-01-add-fuzz-parameters-to-features.patch +++ /dev/null @@ -1,69 +0,0 @@ -From: Henrik Rydberg -Date: Sun, 5 Sep 2010 19:25:11 +0000 (-0700) -Subject: Input: wacom - add fuzz parameters to features -X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Fdtor%2Finput.git;a=commitdiff_plain;h=fed87e655a2c20468d628b37424af58287803afe - -Input: wacom - add fuzz parameters to features - -The signal-to-noise ratio varies between devices, but currently all -devices are treated the same way. Add fuzz parameters to the feature -struct, allowing for tailored treatment of devices. - -Signed-off-by: Henrik Rydberg -Acked-by: Ping Cheng -Signed-off-by: Dmitry Torokhov ---- - -diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c -index 42ba369..e510e4f 100644 ---- a/drivers/input/tablet/wacom_sys.c -+++ b/drivers/input/tablet/wacom_sys.c -@@ -333,8 +333,12 @@ static int wacom_retrieve_hid_descriptor(struct usb_interface *intf, - struct usb_host_interface *interface = intf->cur_altsetting; - struct hid_descriptor *hid_desc; - -- /* default device to penabled */ -+ /* default features */ - features->device_type = BTN_TOOL_PEN; -+ features->x_fuzz = 4; -+ features->y_fuzz = 4; -+ features->pressure_fuzz = 0; -+ features->distance_fuzz = 0; - - /* only Tablet PCs need to retrieve the info */ - if ((features->type != TABLETPC) && (features->type != TABLETPC2FG)) -diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c -index 6e29bad..6d7e164 100644 ---- a/drivers/input/tablet/wacom_wac.c -+++ b/drivers/input/tablet/wacom_wac.c -@@ -951,9 +951,12 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, - - __set_bit(BTN_TOUCH, input_dev->keybit); - -- input_set_abs_params(input_dev, ABS_X, 0, features->x_max, 4, 0); -- input_set_abs_params(input_dev, ABS_Y, 0, features->y_max, 4, 0); -- input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max, 0, 0); -+ input_set_abs_params(input_dev, ABS_X, 0, features->x_max, -+ features->x_fuzz, 0); -+ input_set_abs_params(input_dev, ABS_Y, 0, features->y_max, -+ features->y_fuzz, 0); -+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max, -+ features->pressure_fuzz, 0); - - __set_bit(ABS_MISC, input_dev->absbit); - -diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h -index 99e1a54..d769e9a 100644 ---- a/drivers/input/tablet/wacom_wac.h -+++ b/drivers/input/tablet/wacom_wac.h -@@ -73,6 +73,10 @@ struct wacom_features { - int y_phy; - unsigned char unit; - unsigned char unitExpo; -+ int x_fuzz; -+ int y_fuzz; -+ int pressure_fuzz; -+ int distance_fuzz; - }; - - struct wacom_shared { diff --git a/wacom-02-parse-the-bamboo-device-family.patch b/wacom-02-parse-the-bamboo-device-family.patch deleted file mode 100644 index f24d04d01..000000000 --- a/wacom-02-parse-the-bamboo-device-family.patch +++ /dev/null @@ -1,122 +0,0 @@ -From: Ping Cheng -Date: Sun, 5 Sep 2010 19:25:40 +0000 (-0700) -Subject: Input: wacom - parse the Bamboo device family -X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Fdtor%2Finput.git;a=commitdiff_plain;h=4a88081e739a41d6d70bace7e0a027f9054ab540 - -Input: wacom - parse the Bamboo device family - -The Bamboo devices have multiple interfaces which need to be setup -separately. Use the HID parsing mechanism to achieve that. - -Signed-off-by: Ping Cheng -Signed-off-by: Henrik Rydberg -Signed-off-by: Dmitry Torokhov ---- - -diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c -index e510e4f..98cba08 100644 ---- a/drivers/input/tablet/wacom_sys.c -+++ b/drivers/input/tablet/wacom_sys.c -@@ -195,17 +195,30 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi - features->pktlen = WACOM_PKGLEN_TPC2FG; - features->device_type = BTN_TOOL_TRIPLETAP; - } -- features->x_max = -- get_unaligned_le16(&report[i + 3]); -- features->x_phy = -- get_unaligned_le16(&report[i + 6]); -- features->unit = report[i + 9]; -- features->unitExpo = report[i + 11]; -- i += 12; -+ if (features->type == BAMBOO_PT) { -+ /* need to reset back */ -+ features->pktlen = WACOM_PKGLEN_BBTOUCH; -+ features->device_type = BTN_TOOL_TRIPLETAP; -+ features->x_phy = -+ get_unaligned_le16(&report[i + 5]); -+ features->x_max = -+ get_unaligned_le16(&report[i + 8]); -+ i += 15; -+ } else { -+ features->x_max = -+ get_unaligned_le16(&report[i + 3]); -+ features->x_phy = -+ get_unaligned_le16(&report[i + 6]); -+ features->unit = report[i + 9]; -+ features->unitExpo = report[i + 11]; -+ i += 12; -+ } - } else if (pen) { - /* penabled only accepts exact bytes of data */ - if (features->type == TABLETPC2FG) - features->pktlen = WACOM_PKGLEN_GRAPHIRE; -+ if (features->type == BAMBOO_PT) -+ features->pktlen = WACOM_PKGLEN_BBFUN; - features->device_type = BTN_TOOL_PEN; - features->x_max = - get_unaligned_le16(&report[i + 3]); -@@ -234,6 +247,15 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi - features->y_phy = - get_unaligned_le16(&report[i + 6]); - i += 7; -+ } else if (features->type == BAMBOO_PT) { -+ /* need to reset back */ -+ features->pktlen = WACOM_PKGLEN_BBTOUCH; -+ features->device_type = BTN_TOOL_TRIPLETAP; -+ features->y_phy = -+ get_unaligned_le16(&report[i + 3]); -+ features->y_max = -+ get_unaligned_le16(&report[i + 6]); -+ i += 12; - } else { - features->y_max = - features->x_max; -@@ -245,6 +267,8 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi - /* penabled only accepts exact bytes of data */ - if (features->type == TABLETPC2FG) - features->pktlen = WACOM_PKGLEN_GRAPHIRE; -+ if (features->type == BAMBOO_PT) -+ features->pktlen = WACOM_PKGLEN_BBFUN; - features->device_type = BTN_TOOL_PEN; - features->y_max = - get_unaligned_le16(&report[i + 3]); -@@ -341,7 +365,8 @@ static int wacom_retrieve_hid_descriptor(struct usb_interface *intf, - features->distance_fuzz = 0; - - /* only Tablet PCs need to retrieve the info */ -- if ((features->type != TABLETPC) && (features->type != TABLETPC2FG)) -+ if ((features->type != TABLETPC) && (features->type != TABLETPC2FG) && -+ (features->type != BAMBOO_PT)) - goto out; - - if (usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc)) { -@@ -499,7 +524,8 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i - - strlcpy(wacom_wac->name, features->name, sizeof(wacom_wac->name)); - -- if (features->type == TABLETPC || features->type == TABLETPC2FG) { -+ if (features->type == TABLETPC || features->type == TABLETPC2FG || -+ features->type == BAMBOO_PT) { - /* Append the device type to the name */ - strlcat(wacom_wac->name, - features->device_type == BTN_TOOL_PEN ? -diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h -index d769e9a..fb30895 100644 ---- a/drivers/input/tablet/wacom_wac.h -+++ b/drivers/input/tablet/wacom_wac.h -@@ -21,6 +21,7 @@ - #define WACOM_PKGLEN_INTUOS 10 - #define WACOM_PKGLEN_TPC1FG 5 - #define WACOM_PKGLEN_TPC2FG 14 -+#define WACOM_PKGLEN_BBTOUCH 20 - - /* device IDs */ - #define STYLUS_DEVICE_ID 0x02 -@@ -44,6 +45,7 @@ enum { - PTU, - PL, - DTU, -+ BAMBOO_PT, - INTUOS, - INTUOS3S, - INTUOS3, diff --git a/wacom-03-collect-device-quirks-into-single-function.patch b/wacom-03-collect-device-quirks-into-single-function.patch deleted file mode 100644 index 7bf768770..000000000 --- a/wacom-03-collect-device-quirks-into-single-function.patch +++ /dev/null @@ -1,107 +0,0 @@ -From: Henrik Rydberg -Date: Sun, 5 Sep 2010 19:26:16 +0000 (-0700) -Subject: Input: wacom - collect device quirks into single function -X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Fdtor%2Finput.git;a=commitdiff_plain;h=bc73dd39e78dd6e5b34cd938b7f037a8bc041bdd - -Input: wacom - collect device quirks into single function - -Collect device-specific code into a single function, and use quirks to -flag specific behavior instead. - -Signed-off-by: Henrik Rydberg -Acked-by: Ping Cheng -Signed-off-by: Dmitry Torokhov ---- - -diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h -index 284dfaa..de5adb1 100644 ---- a/drivers/input/tablet/wacom.h -+++ b/drivers/input/tablet/wacom.h -@@ -118,6 +118,7 @@ struct wacom { - extern const struct usb_device_id wacom_ids[]; - - void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len); -+void wacom_setup_device_quirks(struct wacom_features *features); - void wacom_setup_input_capabilities(struct input_dev *input_dev, - struct wacom_wac *wacom_wac); - #endif -diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c -index 98cba08..fc6fd53 100644 ---- a/drivers/input/tablet/wacom_sys.c -+++ b/drivers/input/tablet/wacom_sys.c -@@ -381,12 +381,6 @@ static int wacom_retrieve_hid_descriptor(struct usb_interface *intf, - if (error) - goto out; - -- /* touch device found but size is not defined. use default */ -- if (features->device_type == BTN_TOOL_DOUBLETAP && !features->x_max) { -- features->x_max = 1023; -- features->y_max = 1023; -- } -- - out: - return error; - } -@@ -522,10 +516,11 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i - if (error) - goto fail2; - -+ wacom_setup_device_quirks(features); -+ - strlcpy(wacom_wac->name, features->name, sizeof(wacom_wac->name)); - -- if (features->type == TABLETPC || features->type == TABLETPC2FG || -- features->type == BAMBOO_PT) { -+ if (features->quirks & WACOM_QUIRK_MULTI_INPUT) { - /* Append the device type to the name */ - strlcat(wacom_wac->name, - features->device_type == BTN_TOOL_PEN ? -diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c -index 6d7e164..44b4a59 100644 ---- a/drivers/input/tablet/wacom_wac.c -+++ b/drivers/input/tablet/wacom_wac.c -@@ -941,6 +941,22 @@ static void wacom_setup_intuos(struct wacom_wac *wacom_wac) - input_set_abs_params(input_dev, ABS_THROTTLE, -1023, 1023, 0, 0); - } - -+ -+void wacom_setup_device_quirks(struct wacom_features *features) -+{ -+ -+ /* touch device found but size is not defined. use default */ -+ if (features->device_type == BTN_TOOL_DOUBLETAP && !features->x_max) { -+ features->x_max = 1023; -+ features->y_max = 1023; -+ } -+ -+ /* these device have multiple inputs */ -+ if (features->type == TABLETPC || features->type == TABLETPC2FG || -+ features->type == BAMBOO_PT) -+ features->quirks |= WACOM_QUIRK_MULTI_INPUT; -+} -+ - void wacom_setup_input_capabilities(struct input_dev *input_dev, - struct wacom_wac *wacom_wac) - { -diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h -index fb30895..6a1ff10 100644 ---- a/drivers/input/tablet/wacom_wac.h -+++ b/drivers/input/tablet/wacom_wac.h -@@ -38,6 +38,9 @@ - #define WACOM_REPORT_TPC1FG 6 - #define WACOM_REPORT_TPC2FG 13 - -+/* device quirks */ -+#define WACOM_QUIRK_MULTI_INPUT 0x0001 -+ - enum { - PENPARTNER = 0, - GRAPHIRE, -@@ -79,6 +82,7 @@ struct wacom_features { - int y_fuzz; - int pressure_fuzz; - int distance_fuzz; -+ unsigned quirks; - }; - - struct wacom_shared { diff --git a/wacom-04-add-support-for-the-bamboo-touch-trackpad.patch b/wacom-04-add-support-for-the-bamboo-touch-trackpad.patch deleted file mode 100644 index f104b2ce3..000000000 --- a/wacom-04-add-support-for-the-bamboo-touch-trackpad.patch +++ /dev/null @@ -1,172 +0,0 @@ -From: Henrik Rydberg -Date: Sun, 5 Sep 2010 19:53:16 +0000 (-0700) -Subject: Input: wacom - add support for the Bamboo Touch trackpad -X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Fdtor%2Finput.git;a=commitdiff_plain;h=cb734c03680eaaad64a20a666300eafd1ac260b2 - -Input: wacom - add support for the Bamboo Touch trackpad - -Add support for the Bamboo Touch trackpad, and make it work with -both the Synaptics X Driver and the Multitouch X Driver. The device -uses MT slots internally, so the choice of protocol is a given. - -Signed-off-by: Henrik Rydberg -Acked-by: Ping Cheng -Signed-off-by: Dmitry Torokhov ---- - -diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c -index 44b4a59..4e9b1dd 100644 ---- a/drivers/input/tablet/wacom_wac.c -+++ b/drivers/input/tablet/wacom_wac.c -@@ -855,6 +855,53 @@ static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len) - return retval; - } - -+static int wacom_bpt_irq(struct wacom_wac *wacom, size_t len) -+{ -+ struct input_dev *input = wacom->input; -+ unsigned char *data = wacom->data; -+ int sp = 0, sx = 0, sy = 0, count = 0; -+ int i; -+ -+ if (len != WACOM_PKGLEN_BBTOUCH) -+ return 0; -+ -+ for (i = 0; i < 2; i++) { -+ int p = data[9 * i + 2]; -+ input_mt_slot(input, i); -+ if (p) { -+ int x = get_unaligned_be16(&data[9 * i + 3]) & 0x7ff; -+ int y = get_unaligned_be16(&data[9 * i + 5]) & 0x7ff; -+ input_report_abs(input, ABS_MT_PRESSURE, p); -+ input_report_abs(input, ABS_MT_POSITION_X, x); -+ input_report_abs(input, ABS_MT_POSITION_Y, y); -+ if (wacom->id[i] < 0) -+ wacom->id[i] = wacom->trk_id++ & MAX_TRACKING_ID; -+ if (!count++) -+ sp = p, sx = x, sy = y; -+ } else { -+ wacom->id[i] = -1; -+ } -+ input_report_abs(input, ABS_MT_TRACKING_ID, wacom->id[i]); -+ } -+ -+ input_report_key(input, BTN_TOUCH, count > 0); -+ input_report_key(input, BTN_TOOL_FINGER, count == 1); -+ input_report_key(input, BTN_TOOL_DOUBLETAP, count == 2); -+ -+ input_report_abs(input, ABS_PRESSURE, sp); -+ input_report_abs(input, ABS_X, sx); -+ input_report_abs(input, ABS_Y, sy); -+ -+ input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0); -+ input_report_key(input, BTN_FORWARD, (data[1] & 0x04) != 0); -+ input_report_key(input, BTN_BACK, (data[1] & 0x02) != 0); -+ input_report_key(input, BTN_RIGHT, (data[1] & 0x01) != 0); -+ -+ input_sync(input); -+ -+ return 0; -+} -+ - void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len) - { - bool sync; -@@ -900,6 +947,10 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len) - sync = wacom_tpc_irq(wacom_wac, len); - break; - -+ case BAMBOO_PT: -+ sync = wacom_bpt_irq(wacom_wac, len); -+ break; -+ - default: - sync = false; - break; -@@ -955,6 +1006,13 @@ void wacom_setup_device_quirks(struct wacom_features *features) - if (features->type == TABLETPC || features->type == TABLETPC2FG || - features->type == BAMBOO_PT) - features->quirks |= WACOM_QUIRK_MULTI_INPUT; -+ -+ /* quirks for bamboo touch */ -+ if (features->type == BAMBOO_PT && -+ features->device_type == BTN_TOOL_TRIPLETAP) { -+ features->pressure_max = 256; -+ features->pressure_fuzz = 16; -+ } - } - - void wacom_setup_input_capabilities(struct input_dev *input_dev, -@@ -1095,6 +1153,33 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, - case PENPARTNER: - __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); - break; -+ -+ case BAMBOO_PT: -+ __clear_bit(ABS_MISC, input_dev->absbit); -+ -+ if (features->device_type == BTN_TOOL_TRIPLETAP) { -+ __set_bit(BTN_LEFT, input_dev->keybit); -+ __set_bit(BTN_FORWARD, input_dev->keybit); -+ __set_bit(BTN_BACK, input_dev->keybit); -+ __set_bit(BTN_RIGHT, input_dev->keybit); -+ -+ __set_bit(BTN_TOOL_FINGER, input_dev->keybit); -+ __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit); -+ -+ input_mt_create_slots(input_dev, 2); -+ input_set_abs_params(input_dev, ABS_MT_POSITION_X, -+ 0, features->x_max, -+ features->x_fuzz, 0); -+ input_set_abs_params(input_dev, ABS_MT_POSITION_Y, -+ 0, features->y_max, -+ features->y_fuzz, 0); -+ input_set_abs_params(input_dev, ABS_MT_PRESSURE, -+ 0, features->pressure_max, -+ features->pressure_fuzz, 0); -+ input_set_abs_params(input_dev, ABS_MT_TRACKING_ID, 0, -+ MAX_TRACKING_ID, 0, 0); -+ } -+ break; - } - } - -@@ -1232,6 +1317,8 @@ static const struct wacom_features wacom_features_0xE3 = - { "Wacom ISDv4 E3", WACOM_PKGLEN_TPC2FG, 26202, 16325, 255, 0, TABLETPC2FG }; - static const struct wacom_features wacom_features_0x47 = - { "Wacom Intuos2 6x8", WACOM_PKGLEN_INTUOS, 20320, 16240, 1023, 31, INTUOS }; -+static struct wacom_features wacom_features_0xD0 = -+ { "Wacom Bamboo 2FG", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT }; - - #define USB_DEVICE_WACOM(prod) \ - USB_DEVICE(USB_VENDOR_ID_WACOM, prod), \ -@@ -1296,6 +1383,7 @@ const struct usb_device_id wacom_ids[] = { - { USB_DEVICE_WACOM(0xC6) }, - { USB_DEVICE_WACOM(0xC7) }, - { USB_DEVICE_WACOM(0xCE) }, -+ { USB_DEVICE_WACOM(0xD0) }, - { USB_DEVICE_WACOM(0xF0) }, - { USB_DEVICE_WACOM(0xCC) }, - { USB_DEVICE_WACOM(0x90) }, -diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h -index 6a1ff10..a23d6a5 100644 ---- a/drivers/input/tablet/wacom_wac.h -+++ b/drivers/input/tablet/wacom_wac.h -@@ -41,6 +41,9 @@ - /* device quirks */ - #define WACOM_QUIRK_MULTI_INPUT 0x0001 - -+/* largest reported tracking id */ -+#define MAX_TRACKING_ID 0xfff -+ - enum { - PENPARTNER = 0, - GRAPHIRE, -@@ -96,6 +99,7 @@ struct wacom_wac { - int id[3]; - __u32 serial[2]; - int last_finger; -+ int trk_id; - struct wacom_features features; - struct wacom_shared *shared; - struct input_dev *input; diff --git a/wacom-05-add-a-quirk-for-low-resolution-bamboo-devices.patch b/wacom-05-add-a-quirk-for-low-resolution-bamboo-devices.patch deleted file mode 100644 index 1809ec03e..000000000 --- a/wacom-05-add-a-quirk-for-low-resolution-bamboo-devices.patch +++ /dev/null @@ -1,69 +0,0 @@ -From: Henrik Rydberg -Date: Sun, 5 Sep 2010 19:57:13 +0000 (-0700) -Subject: Input: wacom - add a quirk for low resolution Bamboo devices -X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Fdtor%2Finput.git;a=commitdiff_plain;h=f4ccbef2886968ed409939531f6dd0474d53a12a - -Input: wacom - add a quirk for low resolution Bamboo devices - -The Bamboo Touch reports a sub-screen resolution of 480x320. The -signal-to-noise ratio is only about 100, so filtering is needed in -order to reduce the jitter to a usable level. However, the low -resolution leads to round-off errors in the EWMA filter, resulting in -extremely jerky pointer motion. This patch explicitly sets a higher -resolution for those devices, and tells this to the completion handler -via a low-resolution quirk. - -Signed-off-by: Henrik Rydberg -Acked-by: Ping Cheng -Signed-off-by: Dmitry Torokhov ---- - -diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c -index 4e9b1dd..2f4411a 100644 ---- a/drivers/input/tablet/wacom_wac.c -+++ b/drivers/input/tablet/wacom_wac.c -@@ -857,6 +857,7 @@ static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len) - - static int wacom_bpt_irq(struct wacom_wac *wacom, size_t len) - { -+ struct wacom_features *features = &wacom->features; - struct input_dev *input = wacom->input; - unsigned char *data = wacom->data; - int sp = 0, sx = 0, sy = 0, count = 0; -@@ -871,6 +872,10 @@ static int wacom_bpt_irq(struct wacom_wac *wacom, size_t len) - if (p) { - int x = get_unaligned_be16(&data[9 * i + 3]) & 0x7ff; - int y = get_unaligned_be16(&data[9 * i + 5]) & 0x7ff; -+ if (features->quirks & WACOM_QUIRK_BBTOUCH_LOWRES) { -+ x <<= 5; -+ y <<= 5; -+ } - input_report_abs(input, ABS_MT_PRESSURE, p); - input_report_abs(input, ABS_MT_POSITION_X, x); - input_report_abs(input, ABS_MT_POSITION_Y, y); -@@ -1010,8 +1015,13 @@ void wacom_setup_device_quirks(struct wacom_features *features) - /* quirks for bamboo touch */ - if (features->type == BAMBOO_PT && - features->device_type == BTN_TOOL_TRIPLETAP) { -+ features->x_max <<= 5; -+ features->y_max <<= 5; -+ features->x_fuzz <<= 5; -+ features->y_fuzz <<= 5; - features->pressure_max = 256; - features->pressure_fuzz = 16; -+ features->quirks |= WACOM_QUIRK_BBTOUCH_LOWRES; - } - } - -diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h -index a23d6a5..00ca015 100644 ---- a/drivers/input/tablet/wacom_wac.h -+++ b/drivers/input/tablet/wacom_wac.h -@@ -40,6 +40,7 @@ - - /* device quirks */ - #define WACOM_QUIRK_MULTI_INPUT 0x0001 -+#define WACOM_QUIRK_BBTOUCH_LOWRES 0x0002 - - /* largest reported tracking id */ - #define MAX_TRACKING_ID 0xfff diff --git a/wacom-06-request-tablet-data-for-bamboo-pens.patch b/wacom-06-request-tablet-data-for-bamboo-pens.patch deleted file mode 100644 index 8b31d4eab..000000000 --- a/wacom-06-request-tablet-data-for-bamboo-pens.patch +++ /dev/null @@ -1,55 +0,0 @@ -From: Chris Bagwell -Date: Sun, 12 Sep 2010 07:08:40 +0000 (-0700) -Subject: Input: wacom - request tablet data for Bamboo Pens -X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Fdtor%2Finput.git;a=commitdiff_plain;h=3dc9f40de4dddf9147b80cf15be633189a2b70f4 - -Input: wacom - request tablet data for Bamboo Pens - -Bamboo P&T need to use second form of usb_set_report() to -ask to report tablet data. - -With previous addition of Bamboo Touch, BTN_TOOL_TRIPLETAP is now used -for both TABLETPC2FG and BAMBOO_PT types. So reduced check to -match type=TABLETPC2FG. - -This change shows redundant check for !TABLETPC2FG in else statement. - -Signed-off-by: Chris Bagwell -Acked-by: Ping Cheng -Signed-off-by: Dmitry Torokhov ---- - -diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c -index fc6fd53..1e3af29 100644 ---- a/drivers/input/tablet/wacom_sys.c -+++ b/drivers/input/tablet/wacom_sys.c -@@ -319,8 +319,9 @@ static int wacom_query_tablet_data(struct usb_interface *intf, struct wacom_feat - if (!rep_data) - return error; - -- /* ask to report tablet data if it is 2FGT or not a Tablet PC */ -- if (features->device_type == BTN_TOOL_TRIPLETAP) { -+ /* ask to report tablet data if it is 2FGT Tablet PC or -+ * not a Tablet PC */ -+ if (features->type == TABLETPC2FG) { - do { - rep_data[0] = 3; - rep_data[1] = 4; -@@ -332,7 +333,7 @@ static int wacom_query_tablet_data(struct usb_interface *intf, struct wacom_feat - WAC_HID_FEATURE_REPORT, report_id, - rep_data, 3); - } while ((error < 0 || rep_data[1] != 4) && limit++ < 5); -- } else if (features->type != TABLETPC && features->type != TABLETPC2FG) { -+ } else if (features->type != TABLETPC) { - do { - rep_data[0] = 2; - rep_data[1] = 2; -@@ -364,7 +365,7 @@ static int wacom_retrieve_hid_descriptor(struct usb_interface *intf, - features->pressure_fuzz = 0; - features->distance_fuzz = 0; - -- /* only Tablet PCs need to retrieve the info */ -+ /* only Tablet PCs and Bamboo P&T need to retrieve the info */ - if ((features->type != TABLETPC) && (features->type != TABLETPC2FG) && - (features->type != BAMBOO_PT)) - goto out; diff --git a/wacom-07-move-bamboo-touch-irq-to-its-own-function.patch b/wacom-07-move-bamboo-touch-irq-to-its-own-function.patch deleted file mode 100644 index 7495ac390..000000000 --- a/wacom-07-move-bamboo-touch-irq-to-its-own-function.patch +++ /dev/null @@ -1,52 +0,0 @@ -From: Chris Bagwell -Date: Sun, 12 Sep 2010 07:09:27 +0000 (-0700) -Subject: Input: wacom - move Bamboo Touch irq to its own function -X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Fdtor%2Finput.git;a=commitdiff_plain;h=e1d38e49ad97eec5024342e1244279b645e36688 - -Input: wacom - move Bamboo Touch irq to its own function - -This is in preparation of pen support in same irq handler. - -Signed-off-by: Chris Bagwell -Acked-by: Ping Cheng -Signed-off-by: Dmitry Torokhov ---- - -diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c -index 2f4411a..2f7ed9a 100644 ---- a/drivers/input/tablet/wacom_wac.c -+++ b/drivers/input/tablet/wacom_wac.c -@@ -855,7 +855,7 @@ static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len) - return retval; - } - --static int wacom_bpt_irq(struct wacom_wac *wacom, size_t len) -+static int wacom_bpt_touch(struct wacom_wac *wacom) - { - struct wacom_features *features = &wacom->features; - struct input_dev *input = wacom->input; -@@ -863,9 +863,6 @@ static int wacom_bpt_irq(struct wacom_wac *wacom, size_t len) - int sp = 0, sx = 0, sy = 0, count = 0; - int i; - -- if (len != WACOM_PKGLEN_BBTOUCH) -- return 0; -- - for (i = 0; i < 2; i++) { - int p = data[9 * i + 2]; - input_mt_slot(input, i); -@@ -907,6 +904,14 @@ static int wacom_bpt_irq(struct wacom_wac *wacom, size_t len) - return 0; - } - -+static int wacom_bpt_irq(struct wacom_wac *wacom, size_t len) -+{ -+ if (len == WACOM_PKGLEN_BBTOUCH) -+ return wacom_bpt_touch(wacom); -+ -+ return 0; -+} -+ - void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len) - { - bool sync; diff --git a/wacom-08-add-support-for-bamboo-pen.patch b/wacom-08-add-support-for-bamboo-pen.patch deleted file mode 100644 index 319bf6c53..000000000 --- a/wacom-08-add-support-for-bamboo-pen.patch +++ /dev/null @@ -1,130 +0,0 @@ -From: Chris Bagwell -Date: Sun, 12 Sep 2010 07:11:35 +0000 (-0700) -Subject: Input: wacom - add support for Bamboo Pen -X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Fdtor%2Finput.git;a=commitdiff_plain;h=2aaacb153689dbe9064e4db7e9d00de0edfc1fa0 - -Input: wacom - add support for Bamboo Pen - -This adds support for Pen on Bamboo Pen and Bamboo Pen&Touch devices. -Touchpad is handled by previous Bamboo Touch logic. - -Signed-off-by: Chris Bagwell -Acked-by: Ping Cheng -Signed-off-by: Dmitry Torokhov ---- - -diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c -index 2f7ed9a..536156b 100644 ---- a/drivers/input/tablet/wacom_wac.c -+++ b/drivers/input/tablet/wacom_wac.c -@@ -904,10 +904,75 @@ static int wacom_bpt_touch(struct wacom_wac *wacom) - return 0; - } - -+static int wacom_bpt_pen(struct wacom_wac *wacom) -+{ -+ struct input_dev *input = wacom->input; -+ unsigned char *data = wacom->data; -+ int prox = 0, x = 0, y = 0, p = 0, d = 0, pen = 0, btn1 = 0, btn2 = 0; -+ -+ /* -+ * Similar to Graphire protocol, data[1] & 0x20 is proximity and -+ * data[1] & 0x18 is tool ID. 0x30 is safety check to ignore -+ * 2 unused tool ID's. -+ */ -+ prox = (data[1] & 0x30) == 0x30; -+ -+ /* -+ * All reports shared between PEN and RUBBER tool must be -+ * forced to a known starting value (zero) when transitioning to -+ * out-of-prox. -+ * -+ * If not reset then, to userspace, it will look like lost events -+ * if new tool comes in-prox with same values as previous tool sent. -+ * -+ * Hardware does report zero in most out-of-prox cases but not all. -+ */ -+ if (prox) { -+ if (!wacom->shared->stylus_in_proximity) { -+ if (data[1] & 0x08) { -+ wacom->tool[0] = BTN_TOOL_RUBBER; -+ wacom->id[0] = ERASER_DEVICE_ID; -+ } else { -+ wacom->tool[0] = BTN_TOOL_PEN; -+ wacom->id[0] = STYLUS_DEVICE_ID; -+ } -+ wacom->shared->stylus_in_proximity = true; -+ } -+ x = le16_to_cpup((__le16 *)&data[2]); -+ y = le16_to_cpup((__le16 *)&data[4]); -+ p = le16_to_cpup((__le16 *)&data[6]); -+ d = data[8]; -+ pen = data[1] & 0x01; -+ btn1 = data[1] & 0x02; -+ btn2 = data[1] & 0x04; -+ } -+ -+ input_report_key(input, BTN_TOUCH, pen); -+ input_report_key(input, BTN_STYLUS, btn1); -+ input_report_key(input, BTN_STYLUS2, btn2); -+ -+ input_report_abs(input, ABS_X, x); -+ input_report_abs(input, ABS_Y, y); -+ input_report_abs(input, ABS_PRESSURE, p); -+ input_report_abs(input, ABS_DISTANCE, d); -+ -+ if (!prox) { -+ wacom->id[0] = 0; -+ wacom->shared->stylus_in_proximity = false; -+ } -+ -+ input_report_key(input, wacom->tool[0], prox); /* PEN or RUBBER */ -+ input_report_abs(input, ABS_MISC, wacom->id[0]); /* TOOL ID */ -+ -+ return 1; -+} -+ - static int wacom_bpt_irq(struct wacom_wac *wacom, size_t len) - { - if (len == WACOM_PKGLEN_BBTOUCH) - return wacom_bpt_touch(wacom); -+ else if (len == WACOM_PKGLEN_BBFUN) -+ return wacom_bpt_pen(wacom); - - return 0; - } -@@ -1193,6 +1258,11 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, - features->pressure_fuzz, 0); - input_set_abs_params(input_dev, ABS_MT_TRACKING_ID, 0, - MAX_TRACKING_ID, 0, 0); -+ } else if (features->device_type == BTN_TOOL_PEN) { -+ __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); -+ __set_bit(BTN_TOOL_PEN, input_dev->keybit); -+ __set_bit(BTN_STYLUS, input_dev->keybit); -+ __set_bit(BTN_STYLUS2, input_dev->keybit); - } - break; - } -@@ -1334,6 +1404,12 @@ static const struct wacom_features wacom_features_0x47 = - { "Wacom Intuos2 6x8", WACOM_PKGLEN_INTUOS, 20320, 16240, 1023, 31, INTUOS }; - static struct wacom_features wacom_features_0xD0 = - { "Wacom Bamboo 2FG", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT }; -+static struct wacom_features wacom_features_0xD1 = -+ { "Wacom Bamboo 2FG 4x5", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT }; -+static struct wacom_features wacom_features_0xD2 = -+ { "Wacom Bamboo Craft", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT }; -+static struct wacom_features wacom_features_0xD3 = -+ { "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT }; - - #define USB_DEVICE_WACOM(prod) \ - USB_DEVICE(USB_VENDOR_ID_WACOM, prod), \ -@@ -1399,6 +1475,9 @@ const struct usb_device_id wacom_ids[] = { - { USB_DEVICE_WACOM(0xC7) }, - { USB_DEVICE_WACOM(0xCE) }, - { USB_DEVICE_WACOM(0xD0) }, -+ { USB_DEVICE_WACOM(0xD1) }, -+ { USB_DEVICE_WACOM(0xD2) }, -+ { USB_DEVICE_WACOM(0xD3) }, - { USB_DEVICE_WACOM(0xF0) }, - { USB_DEVICE_WACOM(0xCC) }, - { USB_DEVICE_WACOM(0x90) }, diff --git a/wacom-09-disable-bamboo-touchpad-when-pen-is-being-used.patch b/wacom-09-disable-bamboo-touchpad-when-pen-is-being-used.patch deleted file mode 100644 index e14954031..000000000 --- a/wacom-09-disable-bamboo-touchpad-when-pen-is-being-used.patch +++ /dev/null @@ -1,31 +0,0 @@ -From: Chris Bagwell -Date: Sun, 12 Sep 2010 07:12:28 +0000 (-0700) -Subject: Input: wacom - disable Bamboo touchpad when pen is being used -X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Fdtor%2Finput.git;a=commitdiff_plain;h=33d5f713a19b0f5cb93e0594f7206d2730cf39da - -Input: wacom - disable Bamboo touchpad when pen is being used - -Signed-off-by: Chris Bagwell -Acked-by: Ping Cheng -Signed-off-by: Dmitry Torokhov ---- - -diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c -index 536156b..e1b65ba 100644 ---- a/drivers/input/tablet/wacom_wac.c -+++ b/drivers/input/tablet/wacom_wac.c -@@ -866,7 +866,13 @@ static int wacom_bpt_touch(struct wacom_wac *wacom) - for (i = 0; i < 2; i++) { - int p = data[9 * i + 2]; - input_mt_slot(input, i); -- if (p) { -+ /* -+ * Touch events need to be disabled while stylus is -+ * in proximity because user's hand is resting on touchpad -+ * and sending unwanted events. User expects tablet buttons -+ * to continue working though. -+ */ -+ if (p && !wacom->shared->stylus_in_proximity) { - int x = get_unaligned_be16(&data[9 * i + 3]) & 0x7ff; - int y = get_unaligned_be16(&data[9 * i + 5]) & 0x7ff; - if (features->quirks & WACOM_QUIRK_BBTOUCH_LOWRES) { diff --git a/x86-never-alloc-pci-from-the-last-1M-below-4G.patch b/x86-never-alloc-pci-from-the-last-1M-below-4G.patch deleted file mode 100644 index 11c8304e1..000000000 --- a/x86-never-alloc-pci-from-the-last-1M-below-4G.patch +++ /dev/null @@ -1,64 +0,0 @@ -commit 0dda4d7a8d071c58aa22268fd784869b28b5381b -Author: Bjorn Helgaas -Date: Fri Nov 19 16:25:39 2010 -0700 - - x86/PCI: never allocate PCI space from the last 1M below 4G - - The last 1M before 4G contains the processor restart vector and usually - the system ROM. We don't know the actual ROM size; I chose 1M because - that's how much Windows 7 appears to avoid. - - Without this check, we can allocate PCI space that will never work. On - Matthew's HP 2530p, we put the Intel GTT "Flush Page" at the very last - page, which causes a spontaneous power-off: - - pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xffffffff] - fffff000-ffffffff : Intel Flush Page (assigned by intel-gtt) - - Reference: https://bugzilla.kernel.org/show_bug.cgi?id=23542 - Reported-by: Matthew Garrett - Signed-off-by: Bjorn Helgaas - -diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h -index 5be1542..c1e908f 100644 ---- a/arch/x86/include/asm/e820.h -+++ b/arch/x86/include/asm/e820.h -@@ -72,6 +72,9 @@ struct e820map { - #define BIOS_BEGIN 0x000a0000 - #define BIOS_END 0x00100000 - -+#define BIOS_ROM_BASE 0xfff00000 -+#define BIOS_ROM_END 0x100000000ULL -+ - #ifdef __KERNEL__ - /* see comment in arch/x86/kernel/e820.c */ - extern struct e820map e820; -diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c -index c4bb261..6890241 100644 ---- a/arch/x86/pci/i386.c -+++ b/arch/x86/pci/i386.c -@@ -65,8 +65,14 @@ pcibios_align_resource(void *data, const struct resource *res, - resource_size_t size, resource_size_t align) - { - struct pci_dev *dev = data; -- resource_size_t start = round_down(res->end - size + 1, align); -+ resource_size_t start, end = res->end; - -+ /* Make sure we don't allocate from the last 1M before 4G */ -+ if (res->flags & IORESOURCE_MEM) { -+ if (end >= BIOS_ROM_BASE && end < BIOS_ROM_END) -+ end = BIOS_ROM_BASE - 1; -+ } -+ start = round_down(end - size + 1, align); - if (res->flags & IORESOURCE_IO) { - - /* -@@ -80,6 +86,8 @@ pcibios_align_resource(void *data, const struct resource *res, - } else if (res->flags & IORESOURCE_MEM) { - if (start < BIOS_END) - start = res->end; /* fail; no space */ -+ if (start >= BIOS_ROM_BASE && start < BIOS_ROM_END) -+ start = ALIGN(BIOS_ROM_END, align); - } - return start; - } diff --git a/xhci_hcd-suspend-resume.patch b/xhci_hcd-suspend-resume.patch deleted file mode 100644 index 2f8816973..000000000 --- a/xhci_hcd-suspend-resume.patch +++ /dev/null @@ -1,1289 +0,0 @@ -commit 5e5563661948c57f72cc16b3a0cc5dc205ed4900 -Author: Andiry Xu -Date: Thu Oct 14 07:23:06 2010 -0700 - - USB: xHCI: PCI power management implementation - - This patch implements the PCI suspend/resume. - - Please refer to xHCI spec for doing the suspend/resume operation. - - For S3, CSS/SRS in USBCMD is used to save/restore the internal state. - However, an error maybe occurs while restoring the internal state. - In this case, it means that HC internal state is wrong and HC will be - re-initialized. - - Signed-off-by: Libin Yang - Signed-off-by: Dong Nguyen - Signed-off-by: Andiry Xu - Signed-off-by: Sarah Sharp - Signed-off-by: Greg Kroah-Hartman - -commit 96520f33d383c9a3ba1ca571cac5fa75325728f5 -Author: Andiry Xu -Date: Thu Oct 14 07:23:03 2010 -0700 - - USB: xHCI: bus power management implementation - - This patch implements xHCI bus suspend/resume function hook. - - In the patch it goes through all the ports and suspend/resume - the ports if needed. - - If any port is in remote wakeup, abort bus suspend as what ehci/ohci do. - - Signed-off-by: Libin Yang - Signed-off-by: Crane Cai - Signed-off-by: Andiry Xu - Signed-off-by: Sarah Sharp - Signed-off-by: Greg Kroah-Hartman - -commit 7b29198e193ab6f5e8bfcd48c59340b8c7689f5c -Author: Andiry Xu -Date: Thu Oct 14 07:23:00 2010 -0700 - - USB: xHCI: port remote wakeup implementation - - This commit implements port remote wakeup. - - When a port is in U3 state and resume signaling is detected from a device, - the port transitions to the Resume state, and the xHC generates a Port Status - Change Event. - - For USB3 port, software write a '0' to the PLS field to complete the resume - signaling. For USB2 port, the resume should be signaling for at least 20ms, - irq handler set a timer for port remote wakeup, and then finishes process in - hub_control GetPortStatus. - - Some codes are borrowed from EHCI code. - - Signed-off-by: Andiry Xu - Signed-off-by: Sarah Sharp - Signed-off-by: Greg Kroah-Hartman - -commit 9ada0dec259dfe796a757ff2c9b63a05e6408e5f -Author: Andiry Xu -Date: Thu Oct 14 07:22:57 2010 -0700 - - USB: xHCI: port power management implementation - - Add software trigger USB device suspend resume function hook. - Do port suspend & resume in terms of xHCI spec. - - Port Suspend: - Stop all endpoints via Stop Endpoint Command with Suspend (SP) flag set. - Place individual ports into suspend mode by writing '3' for Port Link State - (PLS) field into PORTSC register. This can only be done when the port is in - Enabled state. When writing, the Port Link State Write Strobe (LWS) bit shall - be set to '1'. - Allocate an xhci_command and stash it in xhci_virt_device to wait completion for - the last Stop Endpoint Command. Use the Suspend bit in TRB to indicate the Stop - Endpoint Command is for port suspend. Based on Sarah's suggestion. - - Port Resume: - Write '0' in PLS field, device will transition to running state. - Ring an endpoints' doorbell to restart it. - - Ref: USB device remote wake need another patch to implement. For details of - how USB subsystem do power management, please see: - Documentation/usb/power-management.txt - - Signed-off-by: Crane Cai - Signed-off-by: Libin Yang - Signed-off-by: Andiry Xu - Signed-off-by: Sarah Sharp - Signed-off-by: Greg Kroah-Hartman - - drivers/usb/host/xhci-hub.c | 424 +++++++++++++++++++++++++++++++++++++++++- - drivers/usb/host/xhci-mem.c | 4 + - drivers/usb/host/xhci-pci.c | 36 ++++- - drivers/usb/host/xhci-ring.c | 101 +++++++++- - drivers/usb/host/xhci.c | 212 +++++++++++++++++++++- - drivers/usb/host/xhci.h | 46 +++++- - 6 files changed, 805 insertions(+), 18 deletions(-) - -diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c -index a1a7a97..7f2f63c 100644 ---- a/drivers/usb/host/xhci-hub.c -+++ b/drivers/usb/host/xhci-hub.c -@@ -24,6 +24,10 @@ - - #include "xhci.h" - -+#define PORT_WAKE_BITS (PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E) -+#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \ -+ PORT_RC | PORT_PLC | PORT_PE) -+ - static void xhci_hub_descriptor(struct xhci_hcd *xhci, - struct usb_hub_descriptor *desc) - { -@@ -123,12 +127,105 @@ static unsigned int xhci_port_speed(unsigned int port_status) - * writing a 0 clears the bit and writing a 1 sets the bit (RWS). - * For all other types (RW1S, RW1CS, RW, and RZ), writing a '0' has no effect. - */ --static u32 xhci_port_state_to_neutral(u32 state) -+u32 xhci_port_state_to_neutral(u32 state) - { - /* Save read-only status and port state */ - return (state & XHCI_PORT_RO) | (state & XHCI_PORT_RWS); - } - -+/* -+ * find slot id based on port number. -+ */ -+int xhci_find_slot_id_by_port(struct xhci_hcd *xhci, u16 port) -+{ -+ int slot_id; -+ int i; -+ -+ slot_id = 0; -+ for (i = 0; i < MAX_HC_SLOTS; i++) { -+ if (!xhci->devs[i]) -+ continue; -+ if (xhci->devs[i]->port == port) { -+ slot_id = i; -+ break; -+ } -+ } -+ -+ return slot_id; -+} -+ -+/* -+ * Stop device -+ * It issues stop endpoint command for EP 0 to 30. And wait the last command -+ * to complete. -+ * suspend will set to 1, if suspend bit need to set in command. -+ */ -+static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend) -+{ -+ struct xhci_virt_device *virt_dev; -+ struct xhci_command *cmd; -+ unsigned long flags; -+ int timeleft; -+ int ret; -+ int i; -+ -+ ret = 0; -+ virt_dev = xhci->devs[slot_id]; -+ cmd = xhci_alloc_command(xhci, false, true, GFP_NOIO); -+ if (!cmd) { -+ xhci_dbg(xhci, "Couldn't allocate command structure.\n"); -+ return -ENOMEM; -+ } -+ -+ spin_lock_irqsave(&xhci->lock, flags); -+ for (i = LAST_EP_INDEX; i > 0; i--) { -+ if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue) -+ xhci_queue_stop_endpoint(xhci, slot_id, i, suspend); -+ } -+ cmd->command_trb = xhci->cmd_ring->enqueue; -+ list_add_tail(&cmd->cmd_list, &virt_dev->cmd_list); -+ xhci_queue_stop_endpoint(xhci, slot_id, 0, suspend); -+ xhci_ring_cmd_db(xhci); -+ spin_unlock_irqrestore(&xhci->lock, flags); -+ -+ /* Wait for last stop endpoint command to finish */ -+ timeleft = wait_for_completion_interruptible_timeout( -+ cmd->completion, -+ USB_CTRL_SET_TIMEOUT); -+ if (timeleft <= 0) { -+ xhci_warn(xhci, "%s while waiting for stop endpoint command\n", -+ timeleft == 0 ? "Timeout" : "Signal"); -+ spin_lock_irqsave(&xhci->lock, flags); -+ /* The timeout might have raced with the event ring handler, so -+ * only delete from the list if the item isn't poisoned. -+ */ -+ if (cmd->cmd_list.next != LIST_POISON1) -+ list_del(&cmd->cmd_list); -+ spin_unlock_irqrestore(&xhci->lock, flags); -+ ret = -ETIME; -+ goto command_cleanup; -+ } -+ -+command_cleanup: -+ xhci_free_command(xhci, cmd); -+ return ret; -+} -+ -+/* -+ * Ring device, it rings the all doorbells unconditionally. -+ */ -+void xhci_ring_device(struct xhci_hcd *xhci, int slot_id) -+{ -+ int i; -+ -+ for (i = 0; i < LAST_EP_INDEX + 1; i++) -+ if (xhci->devs[slot_id]->eps[i].ring && -+ xhci->devs[slot_id]->eps[i].ring->dequeue) -+ xhci_ring_ep_doorbell(xhci, slot_id, i, 0); -+ -+ return; -+} -+ - static void xhci_disable_port(struct xhci_hcd *xhci, u16 wIndex, - u32 __iomem *addr, u32 port_status) - { -@@ -162,6 +259,10 @@ static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue, - status = PORT_PEC; - port_change_bit = "enable/disable"; - break; -+ case USB_PORT_FEAT_C_SUSPEND: -+ status = PORT_PLC; -+ port_change_bit = "suspend/resume"; -+ break; - default: - /* Should never happen */ - return; -@@ -179,9 +280,10 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, - struct xhci_hcd *xhci = hcd_to_xhci(hcd); - int ports; - unsigned long flags; -- u32 temp, status; -+ u32 temp, temp1, status; - int retval = 0; - u32 __iomem *addr; -+ int slot_id; - - ports = HCS_MAX_PORTS(xhci->hcs_params1); - -@@ -211,9 +313,49 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, - if ((temp & PORT_OCC)) - status |= USB_PORT_STAT_C_OVERCURRENT << 16; - /* -- * FIXME ignoring suspend, reset, and USB 2.1/3.0 specific -+ * FIXME ignoring reset and USB 2.1/3.0 specific - * changes - */ -+ if ((temp & PORT_PLS_MASK) == XDEV_U3 -+ && (temp & PORT_POWER)) -+ status |= 1 << USB_PORT_FEAT_SUSPEND; -+ if ((temp & PORT_PLS_MASK) == XDEV_RESUME) { -+ if ((temp & PORT_RESET) || !(temp & PORT_PE)) -+ goto error; -+ if (!DEV_SUPERSPEED(temp) && time_after_eq(jiffies, -+ xhci->resume_done[wIndex])) { -+ xhci_dbg(xhci, "Resume USB2 port %d\n", -+ wIndex + 1); -+ xhci->resume_done[wIndex] = 0; -+ temp1 = xhci_port_state_to_neutral(temp); -+ temp1 &= ~PORT_PLS_MASK; -+ temp1 |= PORT_LINK_STROBE | XDEV_U0; -+ xhci_writel(xhci, temp1, addr); -+ -+ xhci_dbg(xhci, "set port %d resume\n", -+ wIndex + 1); -+ slot_id = xhci_find_slot_id_by_port(xhci, -+ wIndex + 1); -+ if (!slot_id) { -+ xhci_dbg(xhci, "slot_id is zero\n"); -+ goto error; -+ } -+ xhci_ring_device(xhci, slot_id); -+ xhci->port_c_suspend[wIndex >> 5] |= -+ 1 << (wIndex & 31); -+ xhci->suspended_ports[wIndex >> 5] &= -+ ~(1 << (wIndex & 31)); -+ } -+ } -+ if ((temp & PORT_PLS_MASK) == XDEV_U0 -+ && (temp & PORT_POWER) -+ && (xhci->suspended_ports[wIndex >> 5] & -+ (1 << (wIndex & 31)))) { -+ xhci->suspended_ports[wIndex >> 5] &= -+ ~(1 << (wIndex & 31)); -+ xhci->port_c_suspend[wIndex >> 5] |= -+ 1 << (wIndex & 31); -+ } - if (temp & PORT_CONNECT) { - status |= USB_PORT_STAT_CONNECTION; - status |= xhci_port_speed(temp); -@@ -226,6 +368,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, - status |= USB_PORT_STAT_RESET; - if (temp & PORT_POWER) - status |= USB_PORT_STAT_POWER; -+ if (xhci->port_c_suspend[wIndex >> 5] & (1 << (wIndex & 31))) -+ status |= 1 << USB_PORT_FEAT_C_SUSPEND; - xhci_dbg(xhci, "Get port status returned 0x%x\n", status); - put_unaligned(cpu_to_le32(status), (__le32 *) buf); - break; -@@ -238,6 +382,42 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, - temp = xhci_readl(xhci, addr); - temp = xhci_port_state_to_neutral(temp); - switch (wValue) { -+ case USB_PORT_FEAT_SUSPEND: -+ temp = xhci_readl(xhci, addr); -+ /* In spec software should not attempt to suspend -+ * a port unless the port reports that it is in the -+ * enabled (PED = ‘1’,PLS < ‘3’) state. -+ */ -+ if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) -+ || (temp & PORT_PLS_MASK) >= XDEV_U3) { -+ xhci_warn(xhci, "USB core suspending device " -+ "not in U0/U1/U2.\n"); -+ goto error; -+ } -+ -+ slot_id = xhci_find_slot_id_by_port(xhci, wIndex + 1); -+ if (!slot_id) { -+ xhci_warn(xhci, "slot_id is zero\n"); -+ goto error; -+ } -+ /* unlock to execute stop endpoint commands */ -+ spin_unlock_irqrestore(&xhci->lock, flags); -+ xhci_stop_device(xhci, slot_id, 1); -+ spin_lock_irqsave(&xhci->lock, flags); -+ -+ temp = xhci_port_state_to_neutral(temp); -+ temp &= ~PORT_PLS_MASK; -+ temp |= PORT_LINK_STROBE | XDEV_U3; -+ xhci_writel(xhci, temp, addr); -+ -+ spin_unlock_irqrestore(&xhci->lock, flags); -+ msleep(10); /* wait device to enter */ -+ spin_lock_irqsave(&xhci->lock, flags); -+ -+ temp = xhci_readl(xhci, addr); -+ xhci->suspended_ports[wIndex >> 5] |= -+ 1 << (wIndex & (31)); -+ break; - case USB_PORT_FEAT_POWER: - /* - * Turn on ports, even if there isn't per-port switching. -@@ -271,6 +451,52 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, - temp = xhci_readl(xhci, addr); - temp = xhci_port_state_to_neutral(temp); - switch (wValue) { -+ case USB_PORT_FEAT_SUSPEND: -+ temp = xhci_readl(xhci, addr); -+ xhci_dbg(xhci, "clear USB_PORT_FEAT_SUSPEND\n"); -+ xhci_dbg(xhci, "PORTSC %04x\n", temp); -+ if (temp & PORT_RESET) -+ goto error; -+ if (temp & XDEV_U3) { -+ if ((temp & PORT_PE) == 0) -+ goto error; -+ if (DEV_SUPERSPEED(temp)) { -+ temp = xhci_port_state_to_neutral(temp); -+ temp &= ~PORT_PLS_MASK; -+ temp |= PORT_LINK_STROBE | XDEV_U0; -+ xhci_writel(xhci, temp, addr); -+ xhci_readl(xhci, addr); -+ } else { -+ temp = xhci_port_state_to_neutral(temp); -+ temp &= ~PORT_PLS_MASK; -+ temp |= PORT_LINK_STROBE | XDEV_RESUME; -+ xhci_writel(xhci, temp, addr); -+ -+ spin_unlock_irqrestore(&xhci->lock, -+ flags); -+ msleep(20); -+ spin_lock_irqsave(&xhci->lock, flags); -+ -+ temp = xhci_readl(xhci, addr); -+ temp = xhci_port_state_to_neutral(temp); -+ temp &= ~PORT_PLS_MASK; -+ temp |= PORT_LINK_STROBE | XDEV_U0; -+ xhci_writel(xhci, temp, addr); -+ } -+ xhci->port_c_suspend[wIndex >> 5] |= -+ 1 << (wIndex & 31); -+ } -+ -+ slot_id = xhci_find_slot_id_by_port(xhci, wIndex + 1); -+ if (!slot_id) { -+ xhci_dbg(xhci, "slot_id is zero\n"); -+ goto error; -+ } -+ xhci_ring_device(xhci, slot_id); -+ break; -+ case USB_PORT_FEAT_C_SUSPEND: -+ xhci->port_c_suspend[wIndex >> 5] &= -+ ~(1 << (wIndex & 31)); - case USB_PORT_FEAT_C_RESET: - case USB_PORT_FEAT_C_CONNECTION: - case USB_PORT_FEAT_C_OVER_CURRENT: -@@ -306,6 +532,7 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) - { - unsigned long flags; - u32 temp, status; -+ u32 mask; - int i, retval; - struct xhci_hcd *xhci = hcd_to_xhci(hcd); - int ports; -@@ -318,13 +545,18 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) - memset(buf, 0, retval); - status = 0; - -+ mask = PORT_CSC | PORT_PEC | PORT_OCC; -+ - spin_lock_irqsave(&xhci->lock, flags); - /* For each port, did anything change? If so, set that bit in buf. */ - for (i = 0; i < ports; i++) { - addr = &xhci->op_regs->port_status_base + - NUM_PORT_REGS*i; - temp = xhci_readl(xhci, addr); -- if (temp & (PORT_CSC | PORT_PEC | PORT_OCC)) { -+ if ((temp & mask) != 0 || -+ (xhci->port_c_suspend[i >> 5] & 1 << (i & 31)) || -+ (xhci->resume_done[i] && time_after_eq( -+ jiffies, xhci->resume_done[i]))) { - buf[(i + 1) / 8] |= 1 << (i + 1) % 8; - status = 1; - } -@@ -332,3 +564,187 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) - spin_unlock_irqrestore(&xhci->lock, flags); - return status ? retval : 0; - } -+ -+#ifdef CONFIG_PM -+ -+int xhci_bus_suspend(struct usb_hcd *hcd) -+{ -+ struct xhci_hcd *xhci = hcd_to_xhci(hcd); -+ int port; -+ unsigned long flags; -+ -+ xhci_dbg(xhci, "suspend root hub\n"); -+ -+ spin_lock_irqsave(&xhci->lock, flags); -+ -+ if (hcd->self.root_hub->do_remote_wakeup) { -+ port = HCS_MAX_PORTS(xhci->hcs_params1); -+ while (port--) { -+ if (xhci->resume_done[port] != 0) { -+ spin_unlock_irqrestore(&xhci->lock, flags); -+ xhci_dbg(xhci, "suspend failed because " -+ "port %d is resuming\n", -+ port + 1); -+ return -EBUSY; -+ } -+ } -+ } -+ -+ port = HCS_MAX_PORTS(xhci->hcs_params1); -+ xhci->bus_suspended = 0; -+ while (port--) { -+ /* suspend the port if the port is not suspended */ -+ u32 __iomem *addr; -+ u32 t1, t2; -+ int slot_id; -+ -+ addr = &xhci->op_regs->port_status_base + -+ NUM_PORT_REGS * (port & 0xff); -+ t1 = xhci_readl(xhci, addr); -+ t2 = xhci_port_state_to_neutral(t1); -+ -+ if ((t1 & PORT_PE) && !(t1 & PORT_PLS_MASK)) { -+ xhci_dbg(xhci, "port %d not suspended\n", port); -+ slot_id = xhci_find_slot_id_by_port(xhci, port + 1); -+ if (slot_id) { -+ spin_unlock_irqrestore(&xhci->lock, flags); -+ xhci_stop_device(xhci, slot_id, 1); -+ spin_lock_irqsave(&xhci->lock, flags); -+ } -+ t2 &= ~PORT_PLS_MASK; -+ t2 |= PORT_LINK_STROBE | XDEV_U3; -+ set_bit(port, &xhci->bus_suspended); -+ } -+ if (hcd->self.root_hub->do_remote_wakeup) { -+ if (t1 & PORT_CONNECT) { -+ t2 |= PORT_WKOC_E | PORT_WKDISC_E; -+ t2 &= ~PORT_WKCONN_E; -+ } else { -+ t2 |= PORT_WKOC_E | PORT_WKCONN_E; -+ t2 &= ~PORT_WKDISC_E; -+ } -+ } else -+ t2 &= ~PORT_WAKE_BITS; -+ -+ t1 = xhci_port_state_to_neutral(t1); -+ if (t1 != t2) -+ xhci_writel(xhci, t2, addr); -+ -+ if (DEV_HIGHSPEED(t1)) { -+ /* enable remote wake up for USB 2.0 */ -+ u32 __iomem *addr; -+ u32 tmp; -+ -+ addr = &xhci->op_regs->port_power_base + -+ NUM_PORT_REGS * (port & 0xff); -+ tmp = xhci_readl(xhci, addr); -+ tmp |= PORT_RWE; -+ xhci_writel(xhci, tmp, addr); -+ } -+ } -+ hcd->state = HC_STATE_SUSPENDED; -+ xhci->next_statechange = jiffies + msecs_to_jiffies(10); -+ spin_unlock_irqrestore(&xhci->lock, flags); -+ return 0; -+} -+ -+int xhci_bus_resume(struct usb_hcd *hcd) -+{ -+ struct xhci_hcd *xhci = hcd_to_xhci(hcd); -+ int port; -+ u32 temp; -+ unsigned long flags; -+ -+ xhci_dbg(xhci, "resume root hub\n"); -+ -+ if (time_before(jiffies, xhci->next_statechange)) -+ msleep(5); -+ -+ spin_lock_irqsave(&xhci->lock, flags); -+ if (!HCD_HW_ACCESSIBLE(hcd)) { -+ spin_unlock_irqrestore(&xhci->lock, flags); -+ return -ESHUTDOWN; -+ } -+ -+ /* delay the irqs */ -+ temp = xhci_readl(xhci, &xhci->op_regs->command); -+ temp &= ~CMD_EIE; -+ xhci_writel(xhci, temp, &xhci->op_regs->command); -+ -+ port = HCS_MAX_PORTS(xhci->hcs_params1); -+ while (port--) { -+ /* Check whether need resume ports. If needed -+ resume port and disable remote wakeup */ -+ u32 __iomem *addr; -+ u32 temp; -+ int slot_id; -+ -+ addr = &xhci->op_regs->port_status_base + -+ NUM_PORT_REGS * (port & 0xff); -+ temp = xhci_readl(xhci, addr); -+ if (DEV_SUPERSPEED(temp)) -+ temp &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS); -+ else -+ temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS); -+ if (test_bit(port, &xhci->bus_suspended) && -+ (temp & PORT_PLS_MASK)) { -+ if (DEV_SUPERSPEED(temp)) { -+ temp = xhci_port_state_to_neutral(temp); -+ temp &= ~PORT_PLS_MASK; -+ temp |= PORT_LINK_STROBE | XDEV_U0; -+ xhci_writel(xhci, temp, addr); -+ } else { -+ temp = xhci_port_state_to_neutral(temp); -+ temp &= ~PORT_PLS_MASK; -+ temp |= PORT_LINK_STROBE | XDEV_RESUME; -+ xhci_writel(xhci, temp, addr); -+ -+ spin_unlock_irqrestore(&xhci->lock, flags); -+ msleep(20); -+ spin_lock_irqsave(&xhci->lock, flags); -+ -+ temp = xhci_readl(xhci, addr); -+ temp = xhci_port_state_to_neutral(temp); -+ temp &= ~PORT_PLS_MASK; -+ temp |= PORT_LINK_STROBE | XDEV_U0; -+ xhci_writel(xhci, temp, addr); -+ } -+ slot_id = xhci_find_slot_id_by_port(xhci, port + 1); -+ if (slot_id) -+ xhci_ring_device(xhci, slot_id); -+ } else -+ xhci_writel(xhci, temp, addr); -+ -+ if (DEV_HIGHSPEED(temp)) { -+ /* disable remote wake up for USB 2.0 */ -+ u32 __iomem *addr; -+ u32 tmp; -+ -+ addr = &xhci->op_regs->port_power_base + -+ NUM_PORT_REGS * (port & 0xff); -+ tmp = xhci_readl(xhci, addr); -+ tmp &= ~PORT_RWE; -+ xhci_writel(xhci, tmp, addr); -+ } -+ } -+ -+ (void) xhci_readl(xhci, &xhci->op_regs->command); -+ -+ xhci->next_statechange = jiffies + msecs_to_jiffies(5); -+ hcd->state = HC_STATE_RUNNING; -+ /* re-enable irqs */ -+ temp = xhci_readl(xhci, &xhci->op_regs->command); -+ temp |= CMD_EIE; -+ xhci_writel(xhci, temp, &xhci->op_regs->command); -+ temp = xhci_readl(xhci, &xhci->op_regs->command); -+ -+ spin_unlock_irqrestore(&xhci->lock, flags); -+ return 0; -+} -+ -+#else -+ -+#define xhci_bus_suspend NULL -+#define xhci_bus_resume NULL -+ -+#endif -diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c -index 4e51343..cef8d81 100644 ---- a/drivers/usb/host/xhci-mem.c -+++ b/drivers/usb/host/xhci-mem.c -@@ -866,6 +866,7 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud - top_dev = top_dev->parent) - /* Found device below root hub */; - slot_ctx->dev_info2 |= (u32) ROOT_HUB_PORT(top_dev->portnum); -+ dev->port = top_dev->portnum; - xhci_dbg(xhci, "Set root hub portnum to %d\n", top_dev->portnum); - - /* Is this a LS/FS device under a HS hub? */ -@@ -1443,6 +1444,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) - scratchpad_free(xhci); - xhci->page_size = 0; - xhci->page_shift = 0; -+ xhci->bus_suspended = 0; - } - - static int xhci_test_trb_in_td(struct xhci_hcd *xhci, -@@ -1801,6 +1803,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) - init_completion(&xhci->addr_dev); - for (i = 0; i < MAX_HC_SLOTS; ++i) - xhci->devs[i] = NULL; -+ for (i = 0; i < MAX_HC_PORTS; ++i) -+ xhci->resume_done[i] = 0; - - if (scratchpad_alloc(xhci, flags)) - goto fail; -diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c -index f7efe02..e3a5924 100644 ---- a/drivers/usb/host/xhci-pci.c -+++ b/drivers/usb/host/xhci-pci.c -@@ -116,6 +116,30 @@ static int xhci_pci_setup(struct usb_hcd *hcd) - return xhci_pci_reinit(xhci, pdev); - } - -+#ifdef CONFIG_PM -+static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) -+{ -+ struct xhci_hcd *xhci = hcd_to_xhci(hcd); -+ int retval = 0; -+ -+ if (hcd->state != HC_STATE_SUSPENDED) -+ return -EINVAL; -+ -+ retval = xhci_suspend(xhci); -+ -+ return retval; -+} -+ -+static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated) -+{ -+ struct xhci_hcd *xhci = hcd_to_xhci(hcd); -+ int retval = 0; -+ -+ retval = xhci_resume(xhci, hibernated); -+ return retval; -+} -+#endif /* CONFIG_PM */ -+ - static const struct hc_driver xhci_pci_hc_driver = { - .description = hcd_name, - .product_desc = "xHCI Host Controller", -@@ -132,7 +156,10 @@ static const struct hc_driver xhci_pci_hc_driver = { - */ - .reset = xhci_pci_setup, - .start = xhci_run, -- /* suspend and resume implemented later */ -+#ifdef CONFIG_PM -+ .pci_suspend = xhci_pci_suspend, -+ .pci_resume = xhci_pci_resume, -+#endif - .stop = xhci_stop, - .shutdown = xhci_shutdown, - -@@ -162,6 +189,8 @@ static const struct hc_driver xhci_pci_hc_driver = { - /* Root hub support */ - .hub_control = xhci_hub_control, - .hub_status_data = xhci_hub_status_data, -+ .bus_suspend = xhci_bus_suspend, -+ .bus_resume = xhci_bus_resume, - }; - - /*-------------------------------------------------------------------------*/ -@@ -186,6 +215,11 @@ static struct pci_driver xhci_pci_driver = { - /* suspend and resume implemented later */ - - .shutdown = usb_hcd_pci_shutdown, -+#ifdef CONFIG_PM_SLEEP -+ .driver = { -+ .pm = &usb_hcd_pci_pm_ops -+ }, -+#endif - }; - - int xhci_register_pci(void) -diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c -index 48e60d1..9f3115e 100644 ---- a/drivers/usb/host/xhci-ring.c -+++ b/drivers/usb/host/xhci-ring.c -@@ -68,6 +68,10 @@ - #include - #include "xhci.h" - -+static int handle_cmd_in_cmd_wait_list(struct xhci_hcd *xhci, -+ struct xhci_virt_device *virt_dev, -+ struct xhci_event_cmd *event); -+ - /* - * Returns zero if the TRB isn't in this segment, otherwise it returns the DMA - * address of the TRB. -@@ -313,7 +317,7 @@ void xhci_ring_cmd_db(struct xhci_hcd *xhci) - xhci_readl(xhci, &xhci->dba->doorbell[0]); - } - --static void ring_ep_doorbell(struct xhci_hcd *xhci, -+void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, - unsigned int slot_id, - unsigned int ep_index, - unsigned int stream_id) -@@ -353,7 +357,7 @@ static void ring_doorbell_for_active_rings(struct xhci_hcd *xhci, - /* A ring has pending URBs if its TD list is not empty */ - if (!(ep->ep_state & EP_HAS_STREAMS)) { - if (!(list_empty(&ep->ring->td_list))) -- ring_ep_doorbell(xhci, slot_id, ep_index, 0); -+ xhci_ring_ep_doorbell(xhci, slot_id, ep_index, 0); - return; - } - -@@ -361,7 +365,8 @@ static void ring_doorbell_for_active_rings(struct xhci_hcd *xhci, - stream_id++) { - struct xhci_stream_info *stream_info = ep->stream_info; - if (!list_empty(&stream_info->stream_rings[stream_id]->td_list)) -- ring_ep_doorbell(xhci, slot_id, ep_index, stream_id); -+ xhci_ring_ep_doorbell(xhci, slot_id, ep_index, -+ stream_id); - } - } - -@@ -626,10 +631,11 @@ static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci, - * bit cleared) so that the HW will skip over them. - */ - static void handle_stopped_endpoint(struct xhci_hcd *xhci, -- union xhci_trb *trb) -+ union xhci_trb *trb, struct xhci_event_cmd *event) - { - unsigned int slot_id; - unsigned int ep_index; -+ struct xhci_virt_device *virt_dev; - struct xhci_ring *ep_ring; - struct xhci_virt_ep *ep; - struct list_head *entry; -@@ -638,6 +644,21 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci, - - struct xhci_dequeue_state deq_state; - -+ if (unlikely(TRB_TO_SUSPEND_PORT( -+ xhci->cmd_ring->dequeue->generic.field[3]))) { -+ slot_id = TRB_TO_SLOT_ID( -+ xhci->cmd_ring->dequeue->generic.field[3]); -+ virt_dev = xhci->devs[slot_id]; -+ if (virt_dev) -+ handle_cmd_in_cmd_wait_list(xhci, virt_dev, -+ event); -+ else -+ xhci_warn(xhci, "Stop endpoint command " -+ "completion for disabled slot %u\n", -+ slot_id); -+ return; -+ } -+ - memset(&deq_state, 0, sizeof(deq_state)); - slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]); - ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]); -@@ -1091,7 +1112,7 @@ bandwidth_change: - complete(&xhci->addr_dev); - break; - case TRB_TYPE(TRB_STOP_RING): -- handle_stopped_endpoint(xhci, xhci->cmd_ring->dequeue); -+ handle_stopped_endpoint(xhci, xhci->cmd_ring->dequeue, event); - break; - case TRB_TYPE(TRB_SET_DEQ): - handle_set_deq_completion(xhci, event, xhci->cmd_ring->dequeue); -@@ -1144,17 +1165,72 @@ static void handle_vendor_event(struct xhci_hcd *xhci, - static void handle_port_status(struct xhci_hcd *xhci, - union xhci_trb *event) - { -+ struct usb_hcd *hcd = xhci_to_hcd(xhci); - u32 port_id; -+ u32 temp, temp1; -+ u32 __iomem *addr; -+ int ports; -+ int slot_id; - - /* Port status change events always have a successful completion code */ - if (GET_COMP_CODE(event->generic.field[2]) != COMP_SUCCESS) { - xhci_warn(xhci, "WARN: xHC returned failed port status event\n"); - xhci->error_bitmask |= 1 << 8; - } -- /* FIXME: core doesn't care about all port link state changes yet */ - port_id = GET_PORT_ID(event->generic.field[0]); - xhci_dbg(xhci, "Port Status Change Event for port %d\n", port_id); - -+ ports = HCS_MAX_PORTS(xhci->hcs_params1); -+ if ((port_id <= 0) || (port_id > ports)) { -+ xhci_warn(xhci, "Invalid port id %d\n", port_id); -+ goto cleanup; -+ } -+ -+ addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS * (port_id - 1); -+ temp = xhci_readl(xhci, addr); -+ if ((temp & PORT_CONNECT) && (hcd->state == HC_STATE_SUSPENDED)) { -+ xhci_dbg(xhci, "resume root hub\n"); -+ usb_hcd_resume_root_hub(hcd); -+ } -+ -+ if ((temp & PORT_PLC) && (temp & PORT_PLS_MASK) == XDEV_RESUME) { -+ xhci_dbg(xhci, "port resume event for port %d\n", port_id); -+ -+ temp1 = xhci_readl(xhci, &xhci->op_regs->command); -+ if (!(temp1 & CMD_RUN)) { -+ xhci_warn(xhci, "xHC is not running.\n"); -+ goto cleanup; -+ } -+ -+ if (DEV_SUPERSPEED(temp)) { -+ xhci_dbg(xhci, "resume SS port %d\n", port_id); -+ temp = xhci_port_state_to_neutral(temp); -+ temp &= ~PORT_PLS_MASK; -+ temp |= PORT_LINK_STROBE | XDEV_U0; -+ xhci_writel(xhci, temp, addr); -+ slot_id = xhci_find_slot_id_by_port(xhci, port_id); -+ if (!slot_id) { -+ xhci_dbg(xhci, "slot_id is zero\n"); -+ goto cleanup; -+ } -+ xhci_ring_device(xhci, slot_id); -+ xhci_dbg(xhci, "resume SS port %d finished\n", port_id); -+ /* Clear PORT_PLC */ -+ temp = xhci_readl(xhci, addr); -+ temp = xhci_port_state_to_neutral(temp); -+ temp |= PORT_PLC; -+ xhci_writel(xhci, temp, addr); -+ } else { -+ xhci_dbg(xhci, "resume HS port %d\n", port_id); -+ xhci->resume_done[port_id - 1] = jiffies + -+ msecs_to_jiffies(20); -+ mod_timer(&hcd->rh_timer, -+ xhci->resume_done[port_id - 1]); -+ /* Do the rest in GetPortStatus */ -+ } -+ } -+ -+cleanup: - /* Update event ring dequeue pointer before dropping the lock */ - inc_deq(xhci, xhci->event_ring, true); - -@@ -2347,7 +2423,7 @@ static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id, - */ - wmb(); - start_trb->field[3] |= start_cycle; -- ring_ep_doorbell(xhci, slot_id, ep_index, stream_id); -+ xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id); - } - - /* -@@ -2931,7 +3007,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, - wmb(); - start_trb->field[3] |= start_cycle; - -- ring_ep_doorbell(xhci, slot_id, ep_index, urb->stream_id); -+ xhci_ring_ep_doorbell(xhci, slot_id, ep_index, urb->stream_id); - return 0; - } - -@@ -3108,15 +3184,20 @@ int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, - false); - } - -+/* -+ * Suspend is set to indicate "Stop Endpoint Command" is being issued to stop -+ * activity on an endpoint that is about to be suspended. -+ */ - int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id, -- unsigned int ep_index) -+ unsigned int ep_index, int suspend) - { - u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id); - u32 trb_ep_index = EP_ID_FOR_TRB(ep_index); - u32 type = TRB_TYPE(TRB_STOP_RING); -+ u32 trb_suspend = SUSPEND_PORT_FOR_TRB(suspend); - - return queue_command(xhci, 0, 0, 0, -- trb_slot_id | trb_ep_index | type, false); -+ trb_slot_id | trb_ep_index | type | trb_suspend, false); - } - - /* Set Transfer Ring Dequeue Pointer command. -diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c -index d5c550e..34f1b3b 100644 ---- a/drivers/usb/host/xhci.c -+++ b/drivers/usb/host/xhci.c -@@ -551,6 +551,216 @@ void xhci_shutdown(struct usb_hcd *hcd) - xhci_readl(xhci, &xhci->op_regs->status)); - } - -+static void xhci_save_registers(struct xhci_hcd *xhci) -+{ -+ xhci->s3.command = xhci_readl(xhci, &xhci->op_regs->command); -+ xhci->s3.dev_nt = xhci_readl(xhci, &xhci->op_regs->dev_notification); -+ xhci->s3.dcbaa_ptr = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr); -+ xhci->s3.config_reg = xhci_readl(xhci, &xhci->op_regs->config_reg); -+ xhci->s3.irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending); -+ xhci->s3.irq_control = xhci_readl(xhci, &xhci->ir_set->irq_control); -+ xhci->s3.erst_size = xhci_readl(xhci, &xhci->ir_set->erst_size); -+ xhci->s3.erst_base = xhci_read_64(xhci, &xhci->ir_set->erst_base); -+ xhci->s3.erst_dequeue = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); -+} -+ -+static void xhci_restore_registers(struct xhci_hcd *xhci) -+{ -+ xhci_writel(xhci, xhci->s3.command, &xhci->op_regs->command); -+ xhci_writel(xhci, xhci->s3.dev_nt, &xhci->op_regs->dev_notification); -+ xhci_write_64(xhci, xhci->s3.dcbaa_ptr, &xhci->op_regs->dcbaa_ptr); -+ xhci_writel(xhci, xhci->s3.config_reg, &xhci->op_regs->config_reg); -+ xhci_writel(xhci, xhci->s3.irq_pending, &xhci->ir_set->irq_pending); -+ xhci_writel(xhci, xhci->s3.irq_control, &xhci->ir_set->irq_control); -+ xhci_writel(xhci, xhci->s3.erst_size, &xhci->ir_set->erst_size); -+ xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base); -+} -+ -+/* -+ * Stop HC (not bus-specific) -+ * -+ * This is called when the machine transition into S3/S4 mode. -+ * -+ */ -+int xhci_suspend(struct xhci_hcd *xhci) -+{ -+ int rc = 0; -+ struct usb_hcd *hcd = xhci_to_hcd(xhci); -+ u32 command; -+ -+ spin_lock_irq(&xhci->lock); -+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); -+ /* step 1: stop endpoint */ -+ /* skipped assuming that port suspend has done */ -+ -+ /* step 2: clear Run/Stop bit */ -+ command = xhci_readl(xhci, &xhci->op_regs->command); -+ command &= ~CMD_RUN; -+ xhci_writel(xhci, command, &xhci->op_regs->command); -+ if (handshake(xhci, &xhci->op_regs->status, -+ STS_HALT, STS_HALT, 100*100)) { -+ xhci_warn(xhci, "WARN: xHC CMD_RUN timeout\n"); -+ spin_unlock_irq(&xhci->lock); -+ return -ETIMEDOUT; -+ } -+ -+ /* step 3: save registers */ -+ xhci_save_registers(xhci); -+ -+ /* step 4: set CSS flag */ -+ command = xhci_readl(xhci, &xhci->op_regs->command); -+ command |= CMD_CSS; -+ xhci_writel(xhci, command, &xhci->op_regs->command); -+ if (handshake(xhci, &xhci->op_regs->status, STS_SAVE, 0, 10*100)) { -+ xhci_warn(xhci, "WARN: xHC CMD_CSS timeout\n"); -+ spin_unlock_irq(&xhci->lock); -+ return -ETIMEDOUT; -+ } -+ /* step 5: remove core well power */ -+ xhci_cleanup_msix(xhci); -+ spin_unlock_irq(&xhci->lock); -+ -+ return rc; -+} -+ -+/* -+ * start xHC (not bus-specific) -+ * -+ * This is called when the machine transition from S3/S4 mode. -+ * -+ */ -+int xhci_resume(struct xhci_hcd *xhci, bool hibernated) -+{ -+ u32 command, temp = 0; -+ struct usb_hcd *hcd = xhci_to_hcd(xhci); -+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller); -+ u64 val_64; -+ int old_state, retval; -+ -+ old_state = hcd->state; -+ if (time_before(jiffies, xhci->next_statechange)) -+ msleep(100); -+ -+ spin_lock_irq(&xhci->lock); -+ -+ if (!hibernated) { -+ /* step 1: restore register */ -+ xhci_restore_registers(xhci); -+ /* step 2: initialize command ring buffer */ -+ val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); -+ val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) | -+ (xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg, -+ xhci->cmd_ring->dequeue) & -+ (u64) ~CMD_RING_RSVD_BITS) | -+ xhci->cmd_ring->cycle_state; -+ xhci_dbg(xhci, "// Setting command ring address to 0x%llx\n", -+ (long unsigned long) val_64); -+ xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring); -+ /* step 3: restore state and start state*/ -+ /* step 3: set CRS flag */ -+ command = xhci_readl(xhci, &xhci->op_regs->command); -+ command |= CMD_CRS; -+ xhci_writel(xhci, command, &xhci->op_regs->command); -+ if (handshake(xhci, &xhci->op_regs->status, -+ STS_RESTORE, 0, 10*100)) { -+ xhci_dbg(xhci, "WARN: xHC CMD_CSS timeout\n"); -+ spin_unlock_irq(&xhci->lock); -+ return -ETIMEDOUT; -+ } -+ temp = xhci_readl(xhci, &xhci->op_regs->status); -+ } -+ -+ /* If restore operation fails, re-initialize the HC during resume */ -+ if ((temp & STS_SRE) || hibernated) { -+ usb_root_hub_lost_power(hcd->self.root_hub); -+ -+ xhci_dbg(xhci, "Stop HCD\n"); -+ xhci_halt(xhci); -+ xhci_reset(xhci); -+ if (hibernated) -+ xhci_cleanup_msix(xhci); -+ spin_unlock_irq(&xhci->lock); -+ -+#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING -+ /* Tell the event ring poll function not to reschedule */ -+ xhci->zombie = 1; -+ del_timer_sync(&xhci->event_ring_timer); -+#endif -+ -+ xhci_dbg(xhci, "// Disabling event ring interrupts\n"); -+ temp = xhci_readl(xhci, &xhci->op_regs->status); -+ xhci_writel(xhci, temp & ~STS_EINT, &xhci->op_regs->status); -+ temp = xhci_readl(xhci, &xhci->ir_set->irq_pending); -+ xhci_writel(xhci, ER_IRQ_DISABLE(temp), -+ &xhci->ir_set->irq_pending); -+ xhci_print_ir_set(xhci, xhci->ir_set, 0); -+ -+ xhci_dbg(xhci, "cleaning up memory\n"); -+ xhci_mem_cleanup(xhci); -+ xhci_dbg(xhci, "xhci_stop completed - status = %x\n", -+ xhci_readl(xhci, &xhci->op_regs->status)); -+ -+ xhci_dbg(xhci, "Initialize the HCD\n"); -+ retval = xhci_init(hcd); -+ if (retval) -+ return retval; -+ -+ xhci_dbg(xhci, "Start the HCD\n"); -+ retval = xhci_run(hcd); -+ if (!retval) -+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); -+ hcd->state = HC_STATE_SUSPENDED; -+ return retval; -+ } -+ -+ /* Re-setup MSI-X */ -+ if (hcd->irq) -+ free_irq(hcd->irq, hcd); -+ hcd->irq = -1; -+ -+ retval = xhci_setup_msix(xhci); -+ if (retval) -+ /* fall back to msi*/ -+ retval = xhci_setup_msi(xhci); -+ -+ if (retval) { -+ /* fall back to legacy interrupt*/ -+ retval = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED, -+ hcd->irq_descr, hcd); -+ if (retval) { -+ xhci_err(xhci, "request interrupt %d failed\n", -+ pdev->irq); -+ return retval; -+ } -+ hcd->irq = pdev->irq; -+ } -+ -+ /* step 4: set Run/Stop bit */ -+ command = xhci_readl(xhci, &xhci->op_regs->command); -+ command |= CMD_RUN; -+ xhci_writel(xhci, command, &xhci->op_regs->command); -+ handshake(xhci, &xhci->op_regs->status, STS_HALT, -+ 0, 250 * 1000); -+ -+ /* step 5: walk topology and initialize portsc, -+ * portpmsc and portli -+ */ -+ /* this is done in bus_resume */ -+ -+ /* step 6: restart each of the previously -+ * Running endpoints by ringing their doorbells -+ */ -+ -+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); -+ if (!hibernated) -+ hcd->state = old_state; -+ else -+ hcd->state = HC_STATE_SUSPENDED; -+ -+ spin_unlock_irq(&xhci->lock); -+ return 0; -+} -+ - /*-------------------------------------------------------------------------*/ - - /** -@@ -956,7 +1166,7 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) - ep->stop_cmd_timer.expires = jiffies + - XHCI_STOP_EP_CMD_TIMEOUT * HZ; - add_timer(&ep->stop_cmd_timer); -- xhci_queue_stop_endpoint(xhci, urb->dev->slot_id, ep_index); -+ xhci_queue_stop_endpoint(xhci, urb->dev->slot_id, ep_index, 0); - xhci_ring_cmd_db(xhci); - } - done: -diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h -index 34a60d9..b6d8033 100644 ---- a/drivers/usb/host/xhci.h -+++ b/drivers/usb/host/xhci.h -@@ -191,7 +191,7 @@ struct xhci_op_regs { - /* bits 4:6 are reserved (and should be preserved on writes). */ - /* light reset (port status stays unchanged) - reset completed when this is 0 */ - #define CMD_LRESET (1 << 7) --/* FIXME: ignoring host controller save/restore state for now. */ -+/* host controller save/restore state. */ - #define CMD_CSS (1 << 8) - #define CMD_CRS (1 << 9) - /* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */ -@@ -269,6 +269,10 @@ struct xhci_op_regs { - * A read gives the current link PM state of the port, - * a write with Link State Write Strobe set sets the link state. - */ -+#define PORT_PLS_MASK (0xf << 5) -+#define XDEV_U0 (0x0 << 5) -+#define XDEV_U3 (0x3 << 5) -+#define XDEV_RESUME (0xf << 5) - /* true: port has power (see HCC_PPC) */ - #define PORT_POWER (1 << 9) - /* bits 10:13 indicate device speed: -@@ -353,6 +357,8 @@ struct xhci_op_regs { - #define PORT_U2_TIMEOUT(p) (((p) & 0xff) << 8) - /* Bits 24:31 for port testing */ - -+/* USB2 Protocol PORTSPMSC */ -+#define PORT_RWE (1 << 0x3) - - /** - * struct xhci_intr_reg - Interrupt Register Set -@@ -510,6 +516,7 @@ struct xhci_slot_ctx { - #define MAX_EXIT (0xffff) - /* Root hub port number that is needed to access the USB device */ - #define ROOT_HUB_PORT(p) (((p) & 0xff) << 16) -+#define DEVINFO_TO_ROOT_HUB_PORT(p) (((p) >> 16) & 0xff) - /* Maximum number of ports under a hub device */ - #define XHCI_MAX_PORTS(p) (((p) & 0xff) << 24) - -@@ -751,6 +758,7 @@ struct xhci_virt_device { - /* Status of the last command issued for this device */ - u32 cmd_status; - struct list_head cmd_list; -+ u8 port; - }; - - -@@ -881,6 +889,10 @@ struct xhci_event_cmd { - #define TRB_TO_EP_INDEX(p) ((((p) & (0x1f << 16)) >> 16) - 1) - #define EP_ID_FOR_TRB(p) ((((p) + 1) & 0x1f) << 16) - -+#define SUSPEND_PORT_FOR_TRB(p) (((p) & 1) << 23) -+#define TRB_TO_SUSPEND_PORT(p) (((p) & (1 << 23)) >> 23) -+#define LAST_EP_INDEX 30 -+ - /* Set TR Dequeue Pointer command TRB fields */ - #define TRB_TO_STREAM_ID(p) ((((p) & (0xffff << 16)) >> 16)) - #define STREAM_ID_FOR_TRB(p) ((((p)) & 0xffff) << 16) -@@ -1115,6 +1127,17 @@ struct urb_priv { - #define XHCI_STOP_EP_CMD_TIMEOUT 5 - /* XXX: Make these module parameters */ - -+struct s3_save { -+ u32 command; -+ u32 dev_nt; -+ u64 dcbaa_ptr; -+ u32 config_reg; -+ u32 irq_pending; -+ u32 irq_control; -+ u32 erst_size; -+ u64 erst_base; -+ u64 erst_dequeue; -+}; - - /* There is one ehci_hci structure per controller */ - struct xhci_hcd { -@@ -1178,6 +1201,12 @@ struct xhci_hcd { - #endif - /* Host controller watchdog timer structures */ - unsigned int xhc_state; -+ -+ unsigned long bus_suspended; -+ unsigned long next_statechange; -+ -+ u32 command; -+ struct s3_save s3; - /* Host controller is dying - not responding to commands. "I'm not dead yet!" - * - * xHC interrupts have been disabled and a watchdog timer will (or has already) -@@ -1199,6 +1228,10 @@ struct xhci_hcd { - /* Array of pointers to USB 2.0 PORTSC registers */ - u32 __iomem **usb2_ports; - unsigned int num_usb2_ports; -+ u32 port_c_suspend[8]; /* port suspend change*/ -+ u32 suspended_ports[8]; /* which ports are -+ suspended */ -+ unsigned long resume_done[MAX_HC_PORTS]; - }; - - /* For testing purposes */ -@@ -1369,6 +1402,8 @@ int xhci_init(struct usb_hcd *hcd); - int xhci_run(struct usb_hcd *hcd); - void xhci_stop(struct usb_hcd *hcd); - void xhci_shutdown(struct usb_hcd *hcd); -+int xhci_suspend(struct xhci_hcd *xhci); -+int xhci_resume(struct xhci_hcd *xhci, bool hibernated); - int xhci_get_frame(struct usb_hcd *hcd); - irqreturn_t xhci_irq(struct usb_hcd *hcd); - irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd); -@@ -1406,7 +1441,7 @@ int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, - int xhci_queue_vendor_command(struct xhci_hcd *xhci, - u32 field1, u32 field2, u32 field3, u32 field4); - int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id, -- unsigned int ep_index); -+ unsigned int ep_index, int suspend); - int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb, - int slot_id, unsigned int ep_index); - int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb, -@@ -1436,11 +1471,18 @@ void xhci_queue_config_ep_quirk(struct xhci_hcd *xhci, - unsigned int slot_id, unsigned int ep_index, - struct xhci_dequeue_state *deq_state); - void xhci_stop_endpoint_command_watchdog(unsigned long arg); -+void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id, -+ unsigned int ep_index, unsigned int stream_id); - - /* xHCI roothub code */ - int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, - char *buf, u16 wLength); - int xhci_hub_status_data(struct usb_hcd *hcd, char *buf); -+int xhci_bus_suspend(struct usb_hcd *hcd); -+int xhci_bus_resume(struct usb_hcd *hcd); -+u32 xhci_port_state_to_neutral(u32 state); -+int xhci_find_slot_id_by_port(struct xhci_hcd *xhci, u16 port); -+void xhci_ring_device(struct xhci_hcd *xhci, int slot_id); - - /* xHCI contexts */ - struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);