diff --git a/bcm283x-VEC.patch b/bcm283x-VEC.patch new file mode 100644 index 000000000..f48105d8a --- /dev/null +++ b/bcm283x-VEC.patch @@ -0,0 +1,58 @@ +From 7713257febc1cdecdc55e1372ecef7263c58c03c Mon Sep 17 00:00:00 2001 +From: Boris Brezillon +Date: Fri, 2 Dec 2016 14:48:12 +0100 +Subject: [PATCH] ARM: bcm/dt: Add VEC node in bcm283x.dtsi + +Add the VEC (Video EnCoder) node definition in bcm283x.dtsi. + +Signed-off-by: Boris Brezillon +Signed-off-by: Eric Anholt +--- + arch/arm/boot/dts/bcm283x.dtsi | 8 ++++++++ + 1 file changed, 8 insertions(+) + +diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi +index 9a44da1..a3106aa 100644 +--- a/arch/arm/boot/dts/bcm283x.dtsi ++++ b/arch/arm/boot/dts/bcm283x.dtsi +@@ -476,6 +476,14 @@ + status = "disabled"; + }; + ++ vec: vec@7e806000 { ++ compatible = "brcm,bcm2835-vec"; ++ reg = <0x7e806000 0x1000>; ++ clocks = <&clocks BCM2835_CLOCK_VEC>; ++ interrupts = <2 27>; ++ status = "disabled"; ++ }; ++ + pixelvalve@7e807000 { + compatible = "brcm,bcm2835-pixelvalve2"; + reg = <0x7e807000 0x100>; +From 38742ca2b8b21bfc2a2cc24278b58485ff781644 Mon Sep 17 00:00:00 2001 +From: Boris Brezillon +Date: Fri, 2 Dec 2016 14:48:13 +0100 +Subject: [PATCH] ARM: bcm/dt: Enable the VEC IP on all RaspberryPi boards + +Enable the VEC IP on all RaspberryPi boards. + +Signed-off-by: Boris Brezillon +Signed-off-by: Eric Anholt +--- + arch/arm/boot/dts/bcm2835-rpi.dtsi | 5 +++++ + 1 file changed, 5 insertions(+) + +diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi +index 6ddf7dfe..38e6050 100644 +--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi ++++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi +@@ -87,3 +87,8 @@ + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; + }; ++ ++&vec { ++ power-domains = <&power RPI_POWER_DOMAIN_VEC>; ++ status = "okay"; ++}; diff --git a/kernel.spec b/kernel.spec index b8675b827..efff92693 100644 --- a/kernel.spec +++ b/kernel.spec @@ -497,30 +497,32 @@ Source5005: kbuild-AFTER_LINK.patch # Standalone patches # a tempory patch for QCOM hardware enablement. Will be gone by end of 2016/F-26 GA -Patch421: qcom-QDF2432-tmp-errata.patch +Patch420: qcom-QDF2432-tmp-errata.patch # http://www.spinics.net/lists/arm-kernel/msg490981.html -Patch422: geekbox-v4-device-tree-support.patch +Patch421: geekbox-v4-device-tree-support.patch # http://www.spinics.net/lists/linux-tegra/msg26029.html -Patch426: usb-phy-tegra-Add-38.4MHz-clock-table-entry.patch +Patch422: usb-phy-tegra-Add-38.4MHz-clock-table-entry.patch # Fix OMAP4 (pandaboard) -Patch427: arm-revert-mmc-omap_hsmmc-Use-dma_request_chan-for-reque.patch +Patch423: arm-revert-mmc-omap_hsmmc-Use-dma_request_chan-for-reque.patch # Not particularly happy we don't yet have a proper upstream resolution this is the right direction # https://www.spinics.net/lists/arm-kernel/msg535191.html -Patch429: arm64-mm-Fix-memmap-to-be-initialized-for-the-entire-section.patch +Patch424: arm64-mm-Fix-memmap-to-be-initialized-for-the-entire-section.patch # http://patchwork.ozlabs.org/patch/587554/ -Patch430: ARM-tegra-usb-no-reset.patch +Patch425: ARM-tegra-usb-no-reset.patch -Patch431: bcm2837-initial-support.patch +Patch426: AllWinner-net-emac.patch + +Patch430: bcm2837-initial-support.patch # http://www.spinics.net/lists/linux-mmc/msg41151.html -Patch432: bcm283x-mmc-imp-speed.patch +Patch431: bcm283x-mmc-imp-speed.patch -Patch433: AllWinner-net-emac.patch +Patch432: bcm283x-VEC.patch Patch460: lib-cpumask-Make-CPUMASK_OFFSTACK-usable-without-deb.patch @@ -2152,6 +2154,9 @@ fi # # %changelog +* Wed Jan 18 2017 Peter Robinson +- Enable bcm283x VEC composite output + * Tue Jan 17 2017 Justin M. Forbes - 4.10.0-0.rc4.git1.1 - Linux v4.10-rc4-78-g4b19a9e