diff --git a/Makefile.rhelver b/Makefile.rhelver index 11feb4768..4525fea35 100644 --- a/Makefile.rhelver +++ b/Makefile.rhelver @@ -12,7 +12,7 @@ RHEL_MINOR = 3 # # Use this spot to avoid future merge conflicts. # Do not trim this comment. -RHEL_RELEASE = 250 +RHEL_RELEASE = 253 # # RHEL_REBASE_NUM @@ -41,4 +41,4 @@ AUTOMOTIVE_MINOR = 1 # --------------------------- # # Set DERIVATIVE_STREAM to "yes" to enable derivative kernel versioning. -DERIVATIVE_BUILD = 17 +DERIVATIVE_BUILD = 18 diff --git a/kernel-aarch64-64k-debug-rhel.config b/kernel-aarch64-64k-debug-rhel.config index ed1176ce8..b7fbac202 100644 --- a/kernel-aarch64-64k-debug-rhel.config +++ b/kernel-aarch64-64k-debug-rhel.config @@ -1939,6 +1939,7 @@ CONFIG_DRM_NOUVEAU_SIL164=m # CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set # CONFIG_DRM_PANEL_SAMSUNG_DB7430 is not set # CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set +# CONFIG_DRM_PANEL_SAMSUNG_LTL106HL02 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D27A1 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D7AA0 is not set @@ -2008,8 +2009,10 @@ CONFIG_DRM_SIMPLEDRM=y # CONFIG_DRM_SOLOMON_SSD2825 is not set # CONFIG_DRM_SSD130X is not set # CONFIG_DRM_ST7571_I2C is not set +# CONFIG_DRM_ST7571 is not set # CONFIG_DRM_ST7586 is not set # CONFIG_DRM_ST7735R is not set +# CONFIG_DRM_ST7920 is not set # CONFIG_DRM_TEGRA_DEBUG is not set CONFIG_DRM_TEGRA=m # CONFIG_DRM_THINE_THC63LVD1024 is not set @@ -3293,7 +3296,11 @@ CONFIG_IOMMUFD=y # CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set # CONFIG_IOMMU_IO_PGTABLE_DART is not set # CONFIG_IOMMU_IO_PGTABLE_LPAE_KUNIT_TEST is not set +# CONFIG_IOMMU_PT_AMDV1 is not set # CONFIG_IOMMU_PT_KUNIT_TEST is not set +# CONFIG_IOMMU_PT_RISCV64 is not set +# CONFIG_IOMMU_PT_VTDSS is not set +# CONFIG_IOMMU_PT_X86_64 is not set CONFIG_IOMMU_SUPPORT=y CONFIG_IONIC=m CONFIG_IOSCHED_BFQ=y @@ -4486,6 +4493,7 @@ CONFIG_MTD_UBI_WL_THRESHOLD=4096 # CONFIG_MTK_SCPSYS_PM_DOMAINS is not set CONFIG_MTK_T7XX=m # CONFIG_MTK_THERMAL is not set +# CONFIG_MTK_UART_APDMA is not set CONFIG_MULTIUSER=y CONFIG_MUX_ADG792A=m # CONFIG_MUX_ADGS1408 is not set @@ -6594,7 +6602,7 @@ CONFIG_SERIAL_8250_EXTENDED=y # CONFIG_SERIAL_8250_FINTEK is not set CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_MID=y -# CONFIG_SERIAL_8250_MT6577 is not set +CONFIG_SERIAL_8250_MT6577=y CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP=y CONFIG_SERIAL_8250_OMAP=y @@ -8739,7 +8747,7 @@ CONFIG_XDP_SOCKETS=y # CONFIG_XEN_BACKEND is not set # CONFIG_XEN_GRANT_DMA_ALLOC is not set # CONFIG_XEN is not set -CONFIG_XEN_PRIVCMD=m +# CONFIG_XEN_PRIVCMD is not set # CONFIG_XEN_PVCALLS_FRONTEND is not set # CONFIG_XEN_PVH is not set CONFIG_XEN_PVHVM_GUEST=y diff --git a/kernel-aarch64-64k-rhel.config b/kernel-aarch64-64k-rhel.config index b949ede81..674b69469 100644 --- a/kernel-aarch64-64k-rhel.config +++ b/kernel-aarch64-64k-rhel.config @@ -1931,6 +1931,7 @@ CONFIG_DRM_NOUVEAU_SIL164=m # CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set # CONFIG_DRM_PANEL_SAMSUNG_DB7430 is not set # CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set +# CONFIG_DRM_PANEL_SAMSUNG_LTL106HL02 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D27A1 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D7AA0 is not set @@ -2000,8 +2001,10 @@ CONFIG_DRM_SIMPLEDRM=y # CONFIG_DRM_SOLOMON_SSD2825 is not set # CONFIG_DRM_SSD130X is not set # CONFIG_DRM_ST7571_I2C is not set +# CONFIG_DRM_ST7571 is not set # CONFIG_DRM_ST7586 is not set # CONFIG_DRM_ST7735R is not set +# CONFIG_DRM_ST7920 is not set # CONFIG_DRM_TEGRA_DEBUG is not set CONFIG_DRM_TEGRA=m # CONFIG_DRM_THINE_THC63LVD1024 is not set @@ -3277,7 +3280,11 @@ CONFIG_IOMMUFD=m # CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set # CONFIG_IOMMU_IO_PGTABLE_DART is not set # CONFIG_IOMMU_IO_PGTABLE_LPAE_KUNIT_TEST is not set +# CONFIG_IOMMU_PT_AMDV1 is not set # CONFIG_IOMMU_PT_KUNIT_TEST is not set +# CONFIG_IOMMU_PT_RISCV64 is not set +# CONFIG_IOMMU_PT_VTDSS is not set +# CONFIG_IOMMU_PT_X86_64 is not set CONFIG_IOMMU_SUPPORT=y CONFIG_IONIC=m CONFIG_IOSCHED_BFQ=y @@ -4465,6 +4472,7 @@ CONFIG_MTD_UBI_WL_THRESHOLD=4096 # CONFIG_MTK_SCPSYS_PM_DOMAINS is not set CONFIG_MTK_T7XX=m # CONFIG_MTK_THERMAL is not set +# CONFIG_MTK_UART_APDMA is not set CONFIG_MULTIUSER=y CONFIG_MUX_ADG792A=m # CONFIG_MUX_ADGS1408 is not set @@ -6570,7 +6578,7 @@ CONFIG_SERIAL_8250_EXTENDED=y # CONFIG_SERIAL_8250_FINTEK is not set CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_MID=y -# CONFIG_SERIAL_8250_MT6577 is not set +CONFIG_SERIAL_8250_MT6577=y CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP=y CONFIG_SERIAL_8250_OMAP=y @@ -8713,7 +8721,7 @@ CONFIG_XDP_SOCKETS=y # CONFIG_XEN_BACKEND is not set # CONFIG_XEN_GRANT_DMA_ALLOC is not set # CONFIG_XEN is not set -CONFIG_XEN_PRIVCMD=m +# CONFIG_XEN_PRIVCMD is not set # CONFIG_XEN_PVCALLS_FRONTEND is not set # CONFIG_XEN_PVH is not set CONFIG_XEN_PVHVM_GUEST=y diff --git a/kernel-aarch64-debug-rhel.config b/kernel-aarch64-debug-rhel.config index ed1176ce8..b7fbac202 100644 --- a/kernel-aarch64-debug-rhel.config +++ b/kernel-aarch64-debug-rhel.config @@ -1939,6 +1939,7 @@ CONFIG_DRM_NOUVEAU_SIL164=m # CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set # CONFIG_DRM_PANEL_SAMSUNG_DB7430 is not set # CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set +# CONFIG_DRM_PANEL_SAMSUNG_LTL106HL02 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D27A1 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D7AA0 is not set @@ -2008,8 +2009,10 @@ CONFIG_DRM_SIMPLEDRM=y # CONFIG_DRM_SOLOMON_SSD2825 is not set # CONFIG_DRM_SSD130X is not set # CONFIG_DRM_ST7571_I2C is not set +# CONFIG_DRM_ST7571 is not set # CONFIG_DRM_ST7586 is not set # CONFIG_DRM_ST7735R is not set +# CONFIG_DRM_ST7920 is not set # CONFIG_DRM_TEGRA_DEBUG is not set CONFIG_DRM_TEGRA=m # CONFIG_DRM_THINE_THC63LVD1024 is not set @@ -3293,7 +3296,11 @@ CONFIG_IOMMUFD=y # CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set # CONFIG_IOMMU_IO_PGTABLE_DART is not set # CONFIG_IOMMU_IO_PGTABLE_LPAE_KUNIT_TEST is not set +# CONFIG_IOMMU_PT_AMDV1 is not set # CONFIG_IOMMU_PT_KUNIT_TEST is not set +# CONFIG_IOMMU_PT_RISCV64 is not set +# CONFIG_IOMMU_PT_VTDSS is not set +# CONFIG_IOMMU_PT_X86_64 is not set CONFIG_IOMMU_SUPPORT=y CONFIG_IONIC=m CONFIG_IOSCHED_BFQ=y @@ -4486,6 +4493,7 @@ CONFIG_MTD_UBI_WL_THRESHOLD=4096 # CONFIG_MTK_SCPSYS_PM_DOMAINS is not set CONFIG_MTK_T7XX=m # CONFIG_MTK_THERMAL is not set +# CONFIG_MTK_UART_APDMA is not set CONFIG_MULTIUSER=y CONFIG_MUX_ADG792A=m # CONFIG_MUX_ADGS1408 is not set @@ -6594,7 +6602,7 @@ CONFIG_SERIAL_8250_EXTENDED=y # CONFIG_SERIAL_8250_FINTEK is not set CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_MID=y -# CONFIG_SERIAL_8250_MT6577 is not set +CONFIG_SERIAL_8250_MT6577=y CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP=y CONFIG_SERIAL_8250_OMAP=y @@ -8739,7 +8747,7 @@ CONFIG_XDP_SOCKETS=y # CONFIG_XEN_BACKEND is not set # CONFIG_XEN_GRANT_DMA_ALLOC is not set # CONFIG_XEN is not set -CONFIG_XEN_PRIVCMD=m +# CONFIG_XEN_PRIVCMD is not set # CONFIG_XEN_PVCALLS_FRONTEND is not set # CONFIG_XEN_PVH is not set CONFIG_XEN_PVHVM_GUEST=y diff --git a/kernel-aarch64-rhel.config b/kernel-aarch64-rhel.config index b949ede81..674b69469 100644 --- a/kernel-aarch64-rhel.config +++ b/kernel-aarch64-rhel.config @@ -1931,6 +1931,7 @@ CONFIG_DRM_NOUVEAU_SIL164=m # CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set # CONFIG_DRM_PANEL_SAMSUNG_DB7430 is not set # CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set +# CONFIG_DRM_PANEL_SAMSUNG_LTL106HL02 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D27A1 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D7AA0 is not set @@ -2000,8 +2001,10 @@ CONFIG_DRM_SIMPLEDRM=y # CONFIG_DRM_SOLOMON_SSD2825 is not set # CONFIG_DRM_SSD130X is not set # CONFIG_DRM_ST7571_I2C is not set +# CONFIG_DRM_ST7571 is not set # CONFIG_DRM_ST7586 is not set # CONFIG_DRM_ST7735R is not set +# CONFIG_DRM_ST7920 is not set # CONFIG_DRM_TEGRA_DEBUG is not set CONFIG_DRM_TEGRA=m # CONFIG_DRM_THINE_THC63LVD1024 is not set @@ -3277,7 +3280,11 @@ CONFIG_IOMMUFD=m # CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set # CONFIG_IOMMU_IO_PGTABLE_DART is not set # CONFIG_IOMMU_IO_PGTABLE_LPAE_KUNIT_TEST is not set +# CONFIG_IOMMU_PT_AMDV1 is not set # CONFIG_IOMMU_PT_KUNIT_TEST is not set +# CONFIG_IOMMU_PT_RISCV64 is not set +# CONFIG_IOMMU_PT_VTDSS is not set +# CONFIG_IOMMU_PT_X86_64 is not set CONFIG_IOMMU_SUPPORT=y CONFIG_IONIC=m CONFIG_IOSCHED_BFQ=y @@ -4465,6 +4472,7 @@ CONFIG_MTD_UBI_WL_THRESHOLD=4096 # CONFIG_MTK_SCPSYS_PM_DOMAINS is not set CONFIG_MTK_T7XX=m # CONFIG_MTK_THERMAL is not set +# CONFIG_MTK_UART_APDMA is not set CONFIG_MULTIUSER=y CONFIG_MUX_ADG792A=m # CONFIG_MUX_ADGS1408 is not set @@ -6570,7 +6578,7 @@ CONFIG_SERIAL_8250_EXTENDED=y # CONFIG_SERIAL_8250_FINTEK is not set CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_MID=y -# CONFIG_SERIAL_8250_MT6577 is not set +CONFIG_SERIAL_8250_MT6577=y CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP=y CONFIG_SERIAL_8250_OMAP=y @@ -8713,7 +8721,7 @@ CONFIG_XDP_SOCKETS=y # CONFIG_XEN_BACKEND is not set # CONFIG_XEN_GRANT_DMA_ALLOC is not set # CONFIG_XEN is not set -CONFIG_XEN_PRIVCMD=m +# CONFIG_XEN_PRIVCMD is not set # CONFIG_XEN_PVCALLS_FRONTEND is not set # CONFIG_XEN_PVH is not set CONFIG_XEN_PVHVM_GUEST=y diff --git a/kernel-aarch64-rt-64k-debug-rhel.config b/kernel-aarch64-rt-64k-debug-rhel.config index 2c9838bb2..e94d44bde 100644 --- a/kernel-aarch64-rt-64k-debug-rhel.config +++ b/kernel-aarch64-rt-64k-debug-rhel.config @@ -1942,6 +1942,7 @@ CONFIG_DRM_NOUVEAU_SIL164=m # CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set # CONFIG_DRM_PANEL_SAMSUNG_DB7430 is not set # CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set +# CONFIG_DRM_PANEL_SAMSUNG_LTL106HL02 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D27A1 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D7AA0 is not set @@ -2011,8 +2012,10 @@ CONFIG_DRM_SIMPLEDRM=y # CONFIG_DRM_SOLOMON_SSD2825 is not set # CONFIG_DRM_SSD130X is not set # CONFIG_DRM_ST7571_I2C is not set +# CONFIG_DRM_ST7571 is not set # CONFIG_DRM_ST7586 is not set # CONFIG_DRM_ST7735R is not set +# CONFIG_DRM_ST7920 is not set # CONFIG_DRM_TEGRA_DEBUG is not set CONFIG_DRM_TEGRA=m # CONFIG_DRM_THINE_THC63LVD1024 is not set @@ -3334,7 +3337,11 @@ CONFIG_IOMMUFD=y # CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set # CONFIG_IOMMU_IO_PGTABLE_DART is not set # CONFIG_IOMMU_IO_PGTABLE_LPAE_KUNIT_TEST is not set +# CONFIG_IOMMU_PT_AMDV1 is not set # CONFIG_IOMMU_PT_KUNIT_TEST is not set +# CONFIG_IOMMU_PT_RISCV64 is not set +# CONFIG_IOMMU_PT_VTDSS is not set +# CONFIG_IOMMU_PT_X86_64 is not set CONFIG_IOMMU_SUPPORT=y CONFIG_IONIC=m CONFIG_IOSCHED_BFQ=y @@ -4527,6 +4534,7 @@ CONFIG_MTD_UBI_WL_THRESHOLD=4096 # CONFIG_MTK_SCPSYS_PM_DOMAINS is not set CONFIG_MTK_T7XX=m # CONFIG_MTK_THERMAL is not set +# CONFIG_MTK_UART_APDMA is not set CONFIG_MULTIUSER=y CONFIG_MUX_ADG792A=m # CONFIG_MUX_ADGS1408 is not set @@ -6641,7 +6649,7 @@ CONFIG_SERIAL_8250_EXTENDED=y # CONFIG_SERIAL_8250_FINTEK is not set CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_MID=y -# CONFIG_SERIAL_8250_MT6577 is not set +CONFIG_SERIAL_8250_MT6577=y CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP=y CONFIG_SERIAL_8250_OMAP=y @@ -8789,7 +8797,7 @@ CONFIG_XDP_SOCKETS=y # CONFIG_XEN_BACKEND is not set # CONFIG_XEN_GRANT_DMA_ALLOC is not set # CONFIG_XEN is not set -CONFIG_XEN_PRIVCMD=m +# CONFIG_XEN_PRIVCMD is not set # CONFIG_XEN_PVCALLS_FRONTEND is not set # CONFIG_XEN_PVH is not set CONFIG_XEN_PVHVM_GUEST=y diff --git a/kernel-aarch64-rt-64k-rhel.config b/kernel-aarch64-rt-64k-rhel.config index 792334c97..e64737854 100644 --- a/kernel-aarch64-rt-64k-rhel.config +++ b/kernel-aarch64-rt-64k-rhel.config @@ -1934,6 +1934,7 @@ CONFIG_DRM_NOUVEAU_SIL164=m # CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set # CONFIG_DRM_PANEL_SAMSUNG_DB7430 is not set # CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set +# CONFIG_DRM_PANEL_SAMSUNG_LTL106HL02 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D27A1 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D7AA0 is not set @@ -2003,8 +2004,10 @@ CONFIG_DRM_SIMPLEDRM=y # CONFIG_DRM_SOLOMON_SSD2825 is not set # CONFIG_DRM_SSD130X is not set # CONFIG_DRM_ST7571_I2C is not set +# CONFIG_DRM_ST7571 is not set # CONFIG_DRM_ST7586 is not set # CONFIG_DRM_ST7735R is not set +# CONFIG_DRM_ST7920 is not set # CONFIG_DRM_TEGRA_DEBUG is not set CONFIG_DRM_TEGRA=m # CONFIG_DRM_THINE_THC63LVD1024 is not set @@ -3318,7 +3321,11 @@ CONFIG_IOMMUFD=m # CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set # CONFIG_IOMMU_IO_PGTABLE_DART is not set # CONFIG_IOMMU_IO_PGTABLE_LPAE_KUNIT_TEST is not set +# CONFIG_IOMMU_PT_AMDV1 is not set # CONFIG_IOMMU_PT_KUNIT_TEST is not set +# CONFIG_IOMMU_PT_RISCV64 is not set +# CONFIG_IOMMU_PT_VTDSS is not set +# CONFIG_IOMMU_PT_X86_64 is not set CONFIG_IOMMU_SUPPORT=y CONFIG_IONIC=m CONFIG_IOSCHED_BFQ=y @@ -4506,6 +4513,7 @@ CONFIG_MTD_UBI_WL_THRESHOLD=4096 # CONFIG_MTK_SCPSYS_PM_DOMAINS is not set CONFIG_MTK_T7XX=m # CONFIG_MTK_THERMAL is not set +# CONFIG_MTK_UART_APDMA is not set CONFIG_MULTIUSER=y CONFIG_MUX_ADG792A=m # CONFIG_MUX_ADGS1408 is not set @@ -6617,7 +6625,7 @@ CONFIG_SERIAL_8250_EXTENDED=y # CONFIG_SERIAL_8250_FINTEK is not set CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_MID=y -# CONFIG_SERIAL_8250_MT6577 is not set +CONFIG_SERIAL_8250_MT6577=y CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP=y CONFIG_SERIAL_8250_OMAP=y @@ -8763,7 +8771,7 @@ CONFIG_XDP_SOCKETS=y # CONFIG_XEN_BACKEND is not set # CONFIG_XEN_GRANT_DMA_ALLOC is not set # CONFIG_XEN is not set -CONFIG_XEN_PRIVCMD=m +# CONFIG_XEN_PRIVCMD is not set # CONFIG_XEN_PVCALLS_FRONTEND is not set # CONFIG_XEN_PVH is not set CONFIG_XEN_PVHVM_GUEST=y diff --git a/kernel-aarch64-rt-debug-rhel.config b/kernel-aarch64-rt-debug-rhel.config index 632b4a033..f9b18c07b 100644 --- a/kernel-aarch64-rt-debug-rhel.config +++ b/kernel-aarch64-rt-debug-rhel.config @@ -1940,6 +1940,7 @@ CONFIG_DRM_NOUVEAU_SIL164=m # CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set # CONFIG_DRM_PANEL_SAMSUNG_DB7430 is not set # CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set +# CONFIG_DRM_PANEL_SAMSUNG_LTL106HL02 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D27A1 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D7AA0 is not set @@ -2009,8 +2010,10 @@ CONFIG_DRM_SIMPLEDRM=y # CONFIG_DRM_SOLOMON_SSD2825 is not set # CONFIG_DRM_SSD130X is not set # CONFIG_DRM_ST7571_I2C is not set +# CONFIG_DRM_ST7571 is not set # CONFIG_DRM_ST7586 is not set # CONFIG_DRM_ST7735R is not set +# CONFIG_DRM_ST7920 is not set # CONFIG_DRM_TEGRA_DEBUG is not set CONFIG_DRM_TEGRA=m # CONFIG_DRM_THINE_THC63LVD1024 is not set @@ -3331,7 +3334,11 @@ CONFIG_IOMMUFD=y # CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set # CONFIG_IOMMU_IO_PGTABLE_DART is not set # CONFIG_IOMMU_IO_PGTABLE_LPAE_KUNIT_TEST is not set +# CONFIG_IOMMU_PT_AMDV1 is not set # CONFIG_IOMMU_PT_KUNIT_TEST is not set +# CONFIG_IOMMU_PT_RISCV64 is not set +# CONFIG_IOMMU_PT_VTDSS is not set +# CONFIG_IOMMU_PT_X86_64 is not set CONFIG_IOMMU_SUPPORT=y CONFIG_IONIC=m CONFIG_IOSCHED_BFQ=y @@ -4524,6 +4531,7 @@ CONFIG_MTD_UBI_WL_THRESHOLD=4096 # CONFIG_MTK_SCPSYS_PM_DOMAINS is not set CONFIG_MTK_T7XX=m # CONFIG_MTK_THERMAL is not set +# CONFIG_MTK_UART_APDMA is not set CONFIG_MULTIUSER=y CONFIG_MUX_ADG792A=m # CONFIG_MUX_ADGS1408 is not set @@ -6637,7 +6645,7 @@ CONFIG_SERIAL_8250_EXTENDED=y # CONFIG_SERIAL_8250_FINTEK is not set CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_MID=y -# CONFIG_SERIAL_8250_MT6577 is not set +CONFIG_SERIAL_8250_MT6577=y CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP=y CONFIG_SERIAL_8250_OMAP=y @@ -8785,7 +8793,7 @@ CONFIG_XDP_SOCKETS=y # CONFIG_XEN_BACKEND is not set # CONFIG_XEN_GRANT_DMA_ALLOC is not set # CONFIG_XEN is not set -CONFIG_XEN_PRIVCMD=m +# CONFIG_XEN_PRIVCMD is not set # CONFIG_XEN_PVCALLS_FRONTEND is not set # CONFIG_XEN_PVH is not set CONFIG_XEN_PVHVM_GUEST=y diff --git a/kernel-aarch64-rt-rhel.config b/kernel-aarch64-rt-rhel.config index 745ec3e14..c329805fa 100644 --- a/kernel-aarch64-rt-rhel.config +++ b/kernel-aarch64-rt-rhel.config @@ -1932,6 +1932,7 @@ CONFIG_DRM_NOUVEAU_SIL164=m # CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set # CONFIG_DRM_PANEL_SAMSUNG_DB7430 is not set # CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set +# CONFIG_DRM_PANEL_SAMSUNG_LTL106HL02 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D27A1 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D7AA0 is not set @@ -2001,8 +2002,10 @@ CONFIG_DRM_SIMPLEDRM=y # CONFIG_DRM_SOLOMON_SSD2825 is not set # CONFIG_DRM_SSD130X is not set # CONFIG_DRM_ST7571_I2C is not set +# CONFIG_DRM_ST7571 is not set # CONFIG_DRM_ST7586 is not set # CONFIG_DRM_ST7735R is not set +# CONFIG_DRM_ST7920 is not set # CONFIG_DRM_TEGRA_DEBUG is not set CONFIG_DRM_TEGRA=m # CONFIG_DRM_THINE_THC63LVD1024 is not set @@ -3315,7 +3318,11 @@ CONFIG_IOMMUFD=m # CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set # CONFIG_IOMMU_IO_PGTABLE_DART is not set # CONFIG_IOMMU_IO_PGTABLE_LPAE_KUNIT_TEST is not set +# CONFIG_IOMMU_PT_AMDV1 is not set # CONFIG_IOMMU_PT_KUNIT_TEST is not set +# CONFIG_IOMMU_PT_RISCV64 is not set +# CONFIG_IOMMU_PT_VTDSS is not set +# CONFIG_IOMMU_PT_X86_64 is not set CONFIG_IOMMU_SUPPORT=y CONFIG_IONIC=m CONFIG_IOSCHED_BFQ=y @@ -4503,6 +4510,7 @@ CONFIG_MTD_UBI_WL_THRESHOLD=4096 # CONFIG_MTK_SCPSYS_PM_DOMAINS is not set CONFIG_MTK_T7XX=m # CONFIG_MTK_THERMAL is not set +# CONFIG_MTK_UART_APDMA is not set CONFIG_MULTIUSER=y CONFIG_MUX_ADG792A=m # CONFIG_MUX_ADGS1408 is not set @@ -6613,7 +6621,7 @@ CONFIG_SERIAL_8250_EXTENDED=y # CONFIG_SERIAL_8250_FINTEK is not set CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_MID=y -# CONFIG_SERIAL_8250_MT6577 is not set +CONFIG_SERIAL_8250_MT6577=y CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP=y CONFIG_SERIAL_8250_OMAP=y @@ -8759,7 +8767,7 @@ CONFIG_XDP_SOCKETS=y # CONFIG_XEN_BACKEND is not set # CONFIG_XEN_GRANT_DMA_ALLOC is not set # CONFIG_XEN is not set -CONFIG_XEN_PRIVCMD=m +# CONFIG_XEN_PRIVCMD is not set # CONFIG_XEN_PVCALLS_FRONTEND is not set # CONFIG_XEN_PVH is not set CONFIG_XEN_PVHVM_GUEST=y diff --git a/kernel-ppc64le-debug-rhel.config b/kernel-ppc64le-debug-rhel.config index e0f38b81f..8be6564da 100644 --- a/kernel-ppc64le-debug-rhel.config +++ b/kernel-ppc64le-debug-rhel.config @@ -1538,6 +1538,7 @@ CONFIG_DRM_NOUVEAU_SIL164=m # CONFIG_DRM_PANEL_SAMSUNG_AMS639RQ08 is not set # CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set # CONFIG_DRM_PANEL_SAMSUNG_DB7430 is not set +# CONFIG_DRM_PANEL_SAMSUNG_LTL106HL02 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D27A1 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D7AA0 is not set @@ -1607,8 +1608,10 @@ CONFIG_DRM_SIMPLEDRM=y # CONFIG_DRM_SOLOMON_SSD2825 is not set # CONFIG_DRM_SSD130X is not set # CONFIG_DRM_ST7571_I2C is not set +# CONFIG_DRM_ST7571 is not set # CONFIG_DRM_ST7586 is not set # CONFIG_DRM_ST7735R is not set +# CONFIG_DRM_ST7920 is not set # CONFIG_DRM_THINE_THC63LVD1024 is not set # CONFIG_DRM_TI_DLPC3433 is not set # CONFIG_DRM_TIDSS is not set @@ -2789,7 +2792,11 @@ CONFIG_IOMMUFD=y # CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set # CONFIG_IOMMU_IO_PGTABLE_DART is not set # CONFIG_IOMMU_IO_PGTABLE_LPAE_KUNIT_TEST is not set +# CONFIG_IOMMU_PT_AMDV1 is not set # CONFIG_IOMMU_PT_KUNIT_TEST is not set +# CONFIG_IOMMU_PT_RISCV64 is not set +# CONFIG_IOMMU_PT_VTDSS is not set +# CONFIG_IOMMU_PT_X86_64 is not set CONFIG_IOMMU_SUPPORT=y CONFIG_IONIC=m CONFIG_IOSCHED_BFQ=y @@ -7936,7 +7943,7 @@ CONFIG_XDP_SOCKETS_DIAG=m CONFIG_XDP_SOCKETS=y # CONFIG_XEN_BACKEND is not set # CONFIG_XEN_GRANT_DMA_ALLOC is not set -CONFIG_XEN_PRIVCMD=m +# CONFIG_XEN_PRIVCMD is not set # CONFIG_XEN_PVCALLS_FRONTEND is not set # CONFIG_XEN_PVH is not set CONFIG_XEN_PVHVM_GUEST=y diff --git a/kernel-ppc64le-rhel.config b/kernel-ppc64le-rhel.config index d91ca398e..a66c891f3 100644 --- a/kernel-ppc64le-rhel.config +++ b/kernel-ppc64le-rhel.config @@ -1530,6 +1530,7 @@ CONFIG_DRM_NOUVEAU_SIL164=m # CONFIG_DRM_PANEL_SAMSUNG_AMS639RQ08 is not set # CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set # CONFIG_DRM_PANEL_SAMSUNG_DB7430 is not set +# CONFIG_DRM_PANEL_SAMSUNG_LTL106HL02 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D27A1 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D7AA0 is not set @@ -1599,8 +1600,10 @@ CONFIG_DRM_SIMPLEDRM=y # CONFIG_DRM_SOLOMON_SSD2825 is not set # CONFIG_DRM_SSD130X is not set # CONFIG_DRM_ST7571_I2C is not set +# CONFIG_DRM_ST7571 is not set # CONFIG_DRM_ST7586 is not set # CONFIG_DRM_ST7735R is not set +# CONFIG_DRM_ST7920 is not set # CONFIG_DRM_THINE_THC63LVD1024 is not set # CONFIG_DRM_TI_DLPC3433 is not set # CONFIG_DRM_TIDSS is not set @@ -2773,7 +2776,11 @@ CONFIG_IOMMUFD=m # CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set # CONFIG_IOMMU_IO_PGTABLE_DART is not set # CONFIG_IOMMU_IO_PGTABLE_LPAE_KUNIT_TEST is not set +# CONFIG_IOMMU_PT_AMDV1 is not set # CONFIG_IOMMU_PT_KUNIT_TEST is not set +# CONFIG_IOMMU_PT_RISCV64 is not set +# CONFIG_IOMMU_PT_VTDSS is not set +# CONFIG_IOMMU_PT_X86_64 is not set CONFIG_IOMMU_SUPPORT=y CONFIG_IONIC=m CONFIG_IOSCHED_BFQ=y @@ -7912,7 +7919,7 @@ CONFIG_XDP_SOCKETS_DIAG=m CONFIG_XDP_SOCKETS=y # CONFIG_XEN_BACKEND is not set # CONFIG_XEN_GRANT_DMA_ALLOC is not set -CONFIG_XEN_PRIVCMD=m +# CONFIG_XEN_PRIVCMD is not set # CONFIG_XEN_PVCALLS_FRONTEND is not set # CONFIG_XEN_PVH is not set CONFIG_XEN_PVHVM_GUEST=y diff --git a/kernel-riscv64-debug-rhel.config b/kernel-riscv64-debug-rhel.config index aa09f66e1..d3bda8475 100644 --- a/kernel-riscv64-debug-rhel.config +++ b/kernel-riscv64-debug-rhel.config @@ -1550,6 +1550,7 @@ CONFIG_DRM_NOUVEAU_SIL164=m # CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set # CONFIG_DRM_PANEL_SAMSUNG_DB7430 is not set # CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set +# CONFIG_DRM_PANEL_SAMSUNG_LTL106HL02 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D27A1 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D7AA0 is not set @@ -1619,8 +1620,10 @@ CONFIG_DRM_SIMPLEDRM=y # CONFIG_DRM_SOLOMON_SSD2825 is not set # CONFIG_DRM_SSD130X is not set # CONFIG_DRM_ST7571_I2C is not set +# CONFIG_DRM_ST7571 is not set # CONFIG_DRM_ST7586 is not set # CONFIG_DRM_ST7735R is not set +# CONFIG_DRM_ST7920 is not set # CONFIG_DRM_THINE_THC63LVD1024 is not set # CONFIG_DRM_TI_DLPC3433 is not set # CONFIG_DRM_TIDSS is not set @@ -2797,7 +2800,11 @@ CONFIG_IOMMUFD=y # CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set # CONFIG_IOMMU_IO_PGTABLE_DART is not set # CONFIG_IOMMU_IO_PGTABLE_LPAE_KUNIT_TEST is not set +# CONFIG_IOMMU_PT_AMDV1 is not set # CONFIG_IOMMU_PT_KUNIT_TEST is not set +CONFIG_IOMMU_PT_RISCV64=y +# CONFIG_IOMMU_PT_VTDSS is not set +# CONFIG_IOMMU_PT_X86_64 is not set CONFIG_IOMMU_SUPPORT=y CONFIG_IONIC=m CONFIG_IOSCHED_BFQ=y @@ -5203,6 +5210,7 @@ CONFIG_RING_BUFFER_BENCHMARK=m # CONFIG_RISCV_BOOT_SPINWAIT is not set CONFIG_RISCV_COMBO_SPINLOCKS=y # CONFIG_RISCV_EMULATED_UNALIGNED_ACCESS is not set +CONFIG_RISCV_IOMMU=y # CONFIG_RISCV_ISA_FALLBACK is not set CONFIG_RISCV_ISA_SUPM=y CONFIG_RISCV_ISA_SVNAPOT=y @@ -7989,7 +7997,7 @@ CONFIG_XDP_SOCKETS_DIAG=m CONFIG_XDP_SOCKETS=y # CONFIG_XEN_BACKEND is not set # CONFIG_XEN_GRANT_DMA_ALLOC is not set -CONFIG_XEN_PRIVCMD=m +# CONFIG_XEN_PRIVCMD is not set # CONFIG_XEN_PVCALLS_FRONTEND is not set # CONFIG_XEN_PVH is not set CONFIG_XEN_PVHVM_GUEST=y diff --git a/kernel-riscv64-rhel.config b/kernel-riscv64-rhel.config index ab609cca5..6c3a7747f 100644 --- a/kernel-riscv64-rhel.config +++ b/kernel-riscv64-rhel.config @@ -1542,6 +1542,7 @@ CONFIG_DRM_NOUVEAU_SIL164=m # CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set # CONFIG_DRM_PANEL_SAMSUNG_DB7430 is not set # CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set +# CONFIG_DRM_PANEL_SAMSUNG_LTL106HL02 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D27A1 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D7AA0 is not set @@ -1611,8 +1612,10 @@ CONFIG_DRM_SIMPLEDRM=y # CONFIG_DRM_SOLOMON_SSD2825 is not set # CONFIG_DRM_SSD130X is not set # CONFIG_DRM_ST7571_I2C is not set +# CONFIG_DRM_ST7571 is not set # CONFIG_DRM_ST7586 is not set # CONFIG_DRM_ST7735R is not set +# CONFIG_DRM_ST7920 is not set # CONFIG_DRM_THINE_THC63LVD1024 is not set # CONFIG_DRM_TI_DLPC3433 is not set # CONFIG_DRM_TIDSS is not set @@ -2781,7 +2784,11 @@ CONFIG_IOMMUFD=m # CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set # CONFIG_IOMMU_IO_PGTABLE_DART is not set # CONFIG_IOMMU_IO_PGTABLE_LPAE_KUNIT_TEST is not set +# CONFIG_IOMMU_PT_AMDV1 is not set # CONFIG_IOMMU_PT_KUNIT_TEST is not set +CONFIG_IOMMU_PT_RISCV64=y +# CONFIG_IOMMU_PT_VTDSS is not set +# CONFIG_IOMMU_PT_X86_64 is not set CONFIG_IOMMU_SUPPORT=y CONFIG_IONIC=m CONFIG_IOSCHED_BFQ=y @@ -5182,6 +5189,7 @@ CONFIG_RING_BUFFER_BENCHMARK=m # CONFIG_RISCV_BOOT_SPINWAIT is not set CONFIG_RISCV_COMBO_SPINLOCKS=y # CONFIG_RISCV_EMULATED_UNALIGNED_ACCESS is not set +CONFIG_RISCV_IOMMU=y # CONFIG_RISCV_ISA_FALLBACK is not set CONFIG_RISCV_ISA_SUPM=y CONFIG_RISCV_ISA_SVNAPOT=y @@ -7965,7 +7973,7 @@ CONFIG_XDP_SOCKETS_DIAG=m CONFIG_XDP_SOCKETS=y # CONFIG_XEN_BACKEND is not set # CONFIG_XEN_GRANT_DMA_ALLOC is not set -CONFIG_XEN_PRIVCMD=m +# CONFIG_XEN_PRIVCMD is not set # CONFIG_XEN_PVCALLS_FRONTEND is not set # CONFIG_XEN_PVH is not set CONFIG_XEN_PVHVM_GUEST=y diff --git a/kernel-s390x-debug-rhel.config b/kernel-s390x-debug-rhel.config index 8c8eae6e4..0a19e78c8 100644 --- a/kernel-s390x-debug-rhel.config +++ b/kernel-s390x-debug-rhel.config @@ -1546,6 +1546,7 @@ CONFIG_DRM_NOUVEAU_SIL164=m # CONFIG_DRM_PANEL_SAMSUNG_AMS639RQ08 is not set # CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set # CONFIG_DRM_PANEL_SAMSUNG_DB7430 is not set +# CONFIG_DRM_PANEL_SAMSUNG_LTL106HL02 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D27A1 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D7AA0 is not set @@ -1615,8 +1616,10 @@ CONFIG_DRM_SCHED_KUNIT_TEST=m # CONFIG_DRM_SOLOMON_SSD2825 is not set # CONFIG_DRM_SSD130X is not set # CONFIG_DRM_ST7571_I2C is not set +# CONFIG_DRM_ST7571 is not set # CONFIG_DRM_ST7586 is not set # CONFIG_DRM_ST7735R is not set +# CONFIG_DRM_ST7920 is not set # CONFIG_DRM_THINE_THC63LVD1024 is not set # CONFIG_DRM_TI_DLPC3433 is not set # CONFIG_DRM_TIDSS is not set @@ -2776,7 +2779,11 @@ CONFIG_IOMMUFD=y # CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set # CONFIG_IOMMU_IO_PGTABLE_DART is not set # CONFIG_IOMMU_IO_PGTABLE_LPAE_KUNIT_TEST is not set +# CONFIG_IOMMU_PT_AMDV1 is not set # CONFIG_IOMMU_PT_KUNIT_TEST is not set +# CONFIG_IOMMU_PT_RISCV64 is not set +# CONFIG_IOMMU_PT_VTDSS is not set +# CONFIG_IOMMU_PT_X86_64 is not set CONFIG_IOMMU_SUPPORT=y CONFIG_IONIC=m CONFIG_IOSCHED_BFQ=y @@ -7922,7 +7929,7 @@ CONFIG_XDP_SOCKETS_DIAG=m CONFIG_XDP_SOCKETS=y # CONFIG_XEN_BACKEND is not set # CONFIG_XEN_GRANT_DMA_ALLOC is not set -CONFIG_XEN_PRIVCMD=m +# CONFIG_XEN_PRIVCMD is not set # CONFIG_XEN_PVCALLS_FRONTEND is not set # CONFIG_XEN_PVH is not set CONFIG_XEN_PVHVM_GUEST=y diff --git a/kernel-s390x-rhel.config b/kernel-s390x-rhel.config index 2216c1837..b3b333727 100644 --- a/kernel-s390x-rhel.config +++ b/kernel-s390x-rhel.config @@ -1538,6 +1538,7 @@ CONFIG_DRM_NOUVEAU_SIL164=m # CONFIG_DRM_PANEL_SAMSUNG_AMS639RQ08 is not set # CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set # CONFIG_DRM_PANEL_SAMSUNG_DB7430 is not set +# CONFIG_DRM_PANEL_SAMSUNG_LTL106HL02 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D27A1 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D7AA0 is not set @@ -1607,8 +1608,10 @@ CONFIG_DRM_SCHED_KUNIT_TEST=m # CONFIG_DRM_SOLOMON_SSD2825 is not set # CONFIG_DRM_SSD130X is not set # CONFIG_DRM_ST7571_I2C is not set +# CONFIG_DRM_ST7571 is not set # CONFIG_DRM_ST7586 is not set # CONFIG_DRM_ST7735R is not set +# CONFIG_DRM_ST7920 is not set # CONFIG_DRM_THINE_THC63LVD1024 is not set # CONFIG_DRM_TI_DLPC3433 is not set # CONFIG_DRM_TIDSS is not set @@ -2760,7 +2763,11 @@ CONFIG_IOMMUFD=m # CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set # CONFIG_IOMMU_IO_PGTABLE_DART is not set # CONFIG_IOMMU_IO_PGTABLE_LPAE_KUNIT_TEST is not set +# CONFIG_IOMMU_PT_AMDV1 is not set # CONFIG_IOMMU_PT_KUNIT_TEST is not set +# CONFIG_IOMMU_PT_RISCV64 is not set +# CONFIG_IOMMU_PT_VTDSS is not set +# CONFIG_IOMMU_PT_X86_64 is not set CONFIG_IOMMU_SUPPORT=y CONFIG_IONIC=m CONFIG_IOSCHED_BFQ=y @@ -7898,7 +7905,7 @@ CONFIG_XDP_SOCKETS_DIAG=m CONFIG_XDP_SOCKETS=y # CONFIG_XEN_BACKEND is not set # CONFIG_XEN_GRANT_DMA_ALLOC is not set -CONFIG_XEN_PRIVCMD=m +# CONFIG_XEN_PRIVCMD is not set # CONFIG_XEN_PVCALLS_FRONTEND is not set # CONFIG_XEN_PVH is not set CONFIG_XEN_PVHVM_GUEST=y diff --git a/kernel-s390x-zfcpdump-rhel.config b/kernel-s390x-zfcpdump-rhel.config index e23fa1704..68c4c58d6 100644 --- a/kernel-s390x-zfcpdump-rhel.config +++ b/kernel-s390x-zfcpdump-rhel.config @@ -1539,6 +1539,7 @@ CONFIG_DRM_NOUVEAU_SIL164=m # CONFIG_DRM_PANEL_SAMSUNG_AMS639RQ08 is not set # CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set # CONFIG_DRM_PANEL_SAMSUNG_DB7430 is not set +# CONFIG_DRM_PANEL_SAMSUNG_LTL106HL02 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D27A1 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D7AA0 is not set @@ -1608,8 +1609,10 @@ CONFIG_DRM_SCHED_KUNIT_TEST=m # CONFIG_DRM_SOLOMON_SSD2825 is not set # CONFIG_DRM_SSD130X is not set # CONFIG_DRM_ST7571_I2C is not set +# CONFIG_DRM_ST7571 is not set # CONFIG_DRM_ST7586 is not set # CONFIG_DRM_ST7735R is not set +# CONFIG_DRM_ST7920 is not set # CONFIG_DRM_THINE_THC63LVD1024 is not set # CONFIG_DRM_TI_DLPC3433 is not set # CONFIG_DRM_TIDSS is not set @@ -2767,7 +2770,11 @@ CONFIG_IOMMUFD=m # CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set # CONFIG_IOMMU_IO_PGTABLE_DART is not set # CONFIG_IOMMU_IO_PGTABLE_LPAE_KUNIT_TEST is not set +# CONFIG_IOMMU_PT_AMDV1 is not set # CONFIG_IOMMU_PT_KUNIT_TEST is not set +# CONFIG_IOMMU_PT_RISCV64 is not set +# CONFIG_IOMMU_PT_VTDSS is not set +# CONFIG_IOMMU_PT_X86_64 is not set # CONFIG_IOMMU_SUPPORT is not set CONFIG_IONIC=m CONFIG_IOSCHED_BFQ=y @@ -7919,7 +7926,7 @@ CONFIG_XDP_SOCKETS_DIAG=m # CONFIG_XDP_SOCKETS is not set # CONFIG_XEN_BACKEND is not set # CONFIG_XEN_GRANT_DMA_ALLOC is not set -CONFIG_XEN_PRIVCMD=m +# CONFIG_XEN_PRIVCMD is not set # CONFIG_XEN_PVCALLS_FRONTEND is not set # CONFIG_XEN_PVH is not set CONFIG_XEN_PVHVM_GUEST=y diff --git a/kernel-x86_64-debug-rhel.config b/kernel-x86_64-debug-rhel.config index 72249e502..c4996fb6e 100644 --- a/kernel-x86_64-debug-rhel.config +++ b/kernel-x86_64-debug-rhel.config @@ -1653,6 +1653,7 @@ CONFIG_DRM_NOUVEAU_SIL164=m # CONFIG_DRM_PANEL_SAMSUNG_AMS639RQ08 is not set # CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set # CONFIG_DRM_PANEL_SAMSUNG_DB7430 is not set +# CONFIG_DRM_PANEL_SAMSUNG_LTL106HL02 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D27A1 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D7AA0 is not set @@ -1722,8 +1723,10 @@ CONFIG_DRM_SIMPLEDRM=y # CONFIG_DRM_SOLOMON_SSD2825 is not set # CONFIG_DRM_SSD130X is not set # CONFIG_DRM_ST7571_I2C is not set +# CONFIG_DRM_ST7571 is not set # CONFIG_DRM_ST7586 is not set # CONFIG_DRM_ST7735R is not set +# CONFIG_DRM_ST7920 is not set # CONFIG_DRM_THINE_THC63LVD1024 is not set # CONFIG_DRM_TI_DLPC3433 is not set # CONFIG_DRM_TIDSS is not set @@ -3024,7 +3027,11 @@ CONFIG_IOMMUFD=y # CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set # CONFIG_IOMMU_IO_PGTABLE_DART is not set # CONFIG_IOMMU_IO_PGTABLE_LPAE_KUNIT_TEST is not set +CONFIG_IOMMU_PT_AMDV1=y # CONFIG_IOMMU_PT_KUNIT_TEST is not set +# CONFIG_IOMMU_PT_RISCV64 is not set +CONFIG_IOMMU_PT_VTDSS=y +CONFIG_IOMMU_PT_X86_64=y CONFIG_IOMMU_SUPPORT=y CONFIG_IONIC=m CONFIG_IOSCHED_BFQ=y @@ -8422,17 +8429,17 @@ CONFIG_XDP_SOCKETS=y # CONFIG_XEN_BALLOON is not set # CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not set CONFIG_XEN_BLKDEV_FRONTEND=m -CONFIG_XEN_COMPAT_XENFS=y +# CONFIG_XEN_COMPAT_XENFS is not set # CONFIG_XEN_DEBUG_FS is not set CONFIG_XEN_DEV_EVTCHN=m # CONFIG_XEN_FBDEV_FRONTEND is not set -CONFIG_XENFS=m +# CONFIG_XENFS is not set # CONFIG_XEN_GNTDEV is not set # CONFIG_XEN_GRANT_DEV_ALLOC is not set # CONFIG_XEN_GRANT_DMA_ALLOC is not set CONFIG_XEN_NETDEV_FRONTEND=m # CONFIG_XEN_PCIDEV_FRONTEND is not set -CONFIG_XEN_PRIVCMD=m +# CONFIG_XEN_PRIVCMD is not set # CONFIG_XEN_PVCALLS_FRONTEND is not set # CONFIG_XEN_PVH is not set CONFIG_XEN_PVHVM_GUEST=y diff --git a/kernel-x86_64-rhel.config b/kernel-x86_64-rhel.config index 01b8f7497..471983494 100644 --- a/kernel-x86_64-rhel.config +++ b/kernel-x86_64-rhel.config @@ -1645,6 +1645,7 @@ CONFIG_DRM_NOUVEAU_SIL164=m # CONFIG_DRM_PANEL_SAMSUNG_AMS639RQ08 is not set # CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set # CONFIG_DRM_PANEL_SAMSUNG_DB7430 is not set +# CONFIG_DRM_PANEL_SAMSUNG_LTL106HL02 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D27A1 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D7AA0 is not set @@ -1714,8 +1715,10 @@ CONFIG_DRM_SIMPLEDRM=y # CONFIG_DRM_SOLOMON_SSD2825 is not set # CONFIG_DRM_SSD130X is not set # CONFIG_DRM_ST7571_I2C is not set +# CONFIG_DRM_ST7571 is not set # CONFIG_DRM_ST7586 is not set # CONFIG_DRM_ST7735R is not set +# CONFIG_DRM_ST7920 is not set # CONFIG_DRM_THINE_THC63LVD1024 is not set # CONFIG_DRM_TI_DLPC3433 is not set # CONFIG_DRM_TIDSS is not set @@ -3008,7 +3011,11 @@ CONFIG_IOMMUFD=m # CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set # CONFIG_IOMMU_IO_PGTABLE_DART is not set # CONFIG_IOMMU_IO_PGTABLE_LPAE_KUNIT_TEST is not set +CONFIG_IOMMU_PT_AMDV1=y # CONFIG_IOMMU_PT_KUNIT_TEST is not set +# CONFIG_IOMMU_PT_RISCV64 is not set +CONFIG_IOMMU_PT_VTDSS=y +CONFIG_IOMMU_PT_X86_64=y CONFIG_IOMMU_SUPPORT=y CONFIG_IONIC=m CONFIG_IOSCHED_BFQ=y @@ -8397,17 +8404,17 @@ CONFIG_XDP_SOCKETS=y # CONFIG_XEN_BALLOON is not set # CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not set CONFIG_XEN_BLKDEV_FRONTEND=m -CONFIG_XEN_COMPAT_XENFS=y +# CONFIG_XEN_COMPAT_XENFS is not set # CONFIG_XEN_DEBUG_FS is not set CONFIG_XEN_DEV_EVTCHN=m # CONFIG_XEN_FBDEV_FRONTEND is not set -CONFIG_XENFS=m +# CONFIG_XENFS is not set # CONFIG_XEN_GNTDEV is not set # CONFIG_XEN_GRANT_DEV_ALLOC is not set # CONFIG_XEN_GRANT_DMA_ALLOC is not set CONFIG_XEN_NETDEV_FRONTEND=m # CONFIG_XEN_PCIDEV_FRONTEND is not set -CONFIG_XEN_PRIVCMD=m +# CONFIG_XEN_PRIVCMD is not set # CONFIG_XEN_PVCALLS_FRONTEND is not set # CONFIG_XEN_PVH is not set CONFIG_XEN_PVHVM_GUEST=y diff --git a/kernel-x86_64-rt-debug-rhel.config b/kernel-x86_64-rt-debug-rhel.config index 6fdae517d..3155aa5d7 100644 --- a/kernel-x86_64-rt-debug-rhel.config +++ b/kernel-x86_64-rt-debug-rhel.config @@ -1656,6 +1656,7 @@ CONFIG_DRM_NOUVEAU_SIL164=m # CONFIG_DRM_PANEL_SAMSUNG_AMS639RQ08 is not set # CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set # CONFIG_DRM_PANEL_SAMSUNG_DB7430 is not set +# CONFIG_DRM_PANEL_SAMSUNG_LTL106HL02 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D27A1 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D7AA0 is not set @@ -1725,8 +1726,10 @@ CONFIG_DRM_SIMPLEDRM=y # CONFIG_DRM_SOLOMON_SSD2825 is not set # CONFIG_DRM_SSD130X is not set # CONFIG_DRM_ST7571_I2C is not set +# CONFIG_DRM_ST7571 is not set # CONFIG_DRM_ST7586 is not set # CONFIG_DRM_ST7735R is not set +# CONFIG_DRM_ST7920 is not set # CONFIG_DRM_THINE_THC63LVD1024 is not set # CONFIG_DRM_TI_DLPC3433 is not set # CONFIG_DRM_TIDSS is not set @@ -3065,7 +3068,11 @@ CONFIG_IOMMUFD=y # CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set # CONFIG_IOMMU_IO_PGTABLE_DART is not set # CONFIG_IOMMU_IO_PGTABLE_LPAE_KUNIT_TEST is not set +CONFIG_IOMMU_PT_AMDV1=y # CONFIG_IOMMU_PT_KUNIT_TEST is not set +# CONFIG_IOMMU_PT_RISCV64 is not set +CONFIG_IOMMU_PT_VTDSS=y +CONFIG_IOMMU_PT_X86_64=y CONFIG_IOMMU_SUPPORT=y CONFIG_IONIC=m CONFIG_IOSCHED_BFQ=y @@ -8473,17 +8480,17 @@ CONFIG_XDP_SOCKETS=y # CONFIG_XEN_BALLOON is not set # CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not set CONFIG_XEN_BLKDEV_FRONTEND=m -CONFIG_XEN_COMPAT_XENFS=y +# CONFIG_XEN_COMPAT_XENFS is not set # CONFIG_XEN_DEBUG_FS is not set CONFIG_XEN_DEV_EVTCHN=m # CONFIG_XEN_FBDEV_FRONTEND is not set -CONFIG_XENFS=m +# CONFIG_XENFS is not set # CONFIG_XEN_GNTDEV is not set # CONFIG_XEN_GRANT_DEV_ALLOC is not set # CONFIG_XEN_GRANT_DMA_ALLOC is not set CONFIG_XEN_NETDEV_FRONTEND=m # CONFIG_XEN_PCIDEV_FRONTEND is not set -CONFIG_XEN_PRIVCMD=m +# CONFIG_XEN_PRIVCMD is not set # CONFIG_XEN_PVCALLS_FRONTEND is not set # CONFIG_XEN_PVH is not set CONFIG_XEN_PVHVM_GUEST=y diff --git a/kernel-x86_64-rt-rhel.config b/kernel-x86_64-rt-rhel.config index eda363b5a..743944f41 100644 --- a/kernel-x86_64-rt-rhel.config +++ b/kernel-x86_64-rt-rhel.config @@ -1648,6 +1648,7 @@ CONFIG_DRM_NOUVEAU_SIL164=m # CONFIG_DRM_PANEL_SAMSUNG_AMS639RQ08 is not set # CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set # CONFIG_DRM_PANEL_SAMSUNG_DB7430 is not set +# CONFIG_DRM_PANEL_SAMSUNG_LTL106HL02 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D27A1 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D7AA0 is not set @@ -1717,8 +1718,10 @@ CONFIG_DRM_SIMPLEDRM=y # CONFIG_DRM_SOLOMON_SSD2825 is not set # CONFIG_DRM_SSD130X is not set # CONFIG_DRM_ST7571_I2C is not set +# CONFIG_DRM_ST7571 is not set # CONFIG_DRM_ST7586 is not set # CONFIG_DRM_ST7735R is not set +# CONFIG_DRM_ST7920 is not set # CONFIG_DRM_THINE_THC63LVD1024 is not set # CONFIG_DRM_TI_DLPC3433 is not set # CONFIG_DRM_TIDSS is not set @@ -3049,7 +3052,11 @@ CONFIG_IOMMUFD=m # CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set # CONFIG_IOMMU_IO_PGTABLE_DART is not set # CONFIG_IOMMU_IO_PGTABLE_LPAE_KUNIT_TEST is not set +CONFIG_IOMMU_PT_AMDV1=y # CONFIG_IOMMU_PT_KUNIT_TEST is not set +# CONFIG_IOMMU_PT_RISCV64 is not set +CONFIG_IOMMU_PT_VTDSS=y +CONFIG_IOMMU_PT_X86_64=y CONFIG_IOMMU_SUPPORT=y CONFIG_IONIC=m CONFIG_IOSCHED_BFQ=y @@ -8448,17 +8455,17 @@ CONFIG_XDP_SOCKETS=y # CONFIG_XEN_BALLOON is not set # CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not set CONFIG_XEN_BLKDEV_FRONTEND=m -CONFIG_XEN_COMPAT_XENFS=y +# CONFIG_XEN_COMPAT_XENFS is not set # CONFIG_XEN_DEBUG_FS is not set CONFIG_XEN_DEV_EVTCHN=m # CONFIG_XEN_FBDEV_FRONTEND is not set -CONFIG_XENFS=m +# CONFIG_XENFS is not set # CONFIG_XEN_GNTDEV is not set # CONFIG_XEN_GRANT_DEV_ALLOC is not set # CONFIG_XEN_GRANT_DMA_ALLOC is not set CONFIG_XEN_NETDEV_FRONTEND=m # CONFIG_XEN_PCIDEV_FRONTEND is not set -CONFIG_XEN_PRIVCMD=m +# CONFIG_XEN_PRIVCMD is not set # CONFIG_XEN_PVCALLS_FRONTEND is not set # CONFIG_XEN_PVH is not set CONFIG_XEN_PVHVM_GUEST=y diff --git a/kernel.changelog b/kernel.changelog index ee3c1de56..c03da8c4e 100644 --- a/kernel.changelog +++ b/kernel.changelog @@ -1,3 +1,7 @@ +* Sun Aug 02 2026 Jan Stancek [6.12.0-253.18.el10nv] +- Merge tag 'kernel-6.12.0-253.el10' into main-aie-nv (Jan Stancek) [VOYAGER-1095] +Resolves: VOYAGER-1095 + * Fri Jul 17 2026 Jan Stancek [6.12.0-250.17.el10nv] - Merge tag 'kernel-6.12.0-250.el10' into main-aie-nv (Jan Stancek) [VOYAGER-1095] Resolves: VOYAGER-1095 @@ -167,6 +171,485 @@ Resolves: VOYAGER-551 - redhat: set up initial Makefile.variables (Jan Stancek) Resolves: VOYAGER-10, VOYAGER-286, VOYAGER-488, VOYAGER-494, VOYAGER-551, VOYAGER-75 +* Wed Jul 29 2026 CKI KWF Bot [6.12.0-253.el10] +- redhat: add kmap.py tool and kernel-kmap-internal package (Rado Vrbovsky) +- net/sched: cls_api: Handle TC_ACT_CONSUMED in tcf_qevent_handle (CKI Backport Bot) [RHEL-214083] {CVE-2026-64530} +- x86/fpu: Ensure XFD state on signal delivery (Steve Best) [RHEL-213537] +- platform/x86: intel-hid: Protect ACPI notify handler against recursion (Steve Best) [RHEL-213294] +- iTCO_wdt: mask NMI_NOW bit for update_no_reboot_bit() call (Dennis Chen) [RHEL-212108] +- ksm: use range-walk function to jump over holes in scan_get_next_rmap_item (Rafael Aquini) [RHEL-189556] {CVE-2025-68211} +- i2c: i801: fix hardware state machine corruption in error path (Steve Best) [RHEL-212367] +- gitlab-ci: enable riscv64 builds for c10s and rhel10 (Michael Krausch-Hofmann) +- pinctrl: mediatek: paris: bypass pinctrl GPIO layer in set GPIO direction (Jiri Benc) [RHEL-191293] +- pinctrl: mediatek: eint: Drop base from mtk_eint_chip_write_mask() (Jiri Benc) [RHEL-191293] +- pinctrl: mediatek: make devm allocations safer and clearer in mtk_eint_do_init() (Jiri Benc) [RHEL-191293] +- pinctrl: Use dev_fwnode() (Jiri Benc) [RHEL-191293] +- pinctrl: mediatek: eint: Fix invalid pointer dereference for v1 platforms (Jiri Benc) [RHEL-191293] +- pinctrl: mediatek: paris: use new GPIO line value setter callbacks (Jiri Benc) [RHEL-191293] +- pinctrl: mediatek: paris: don't double-check the GPIO number (Jiri Benc) [RHEL-191293] +- pinctrl: mediatek: common-v1: Fix error checking in mtk_eint_init() (Jiri Benc) [RHEL-191293] +- pinctrl: mediatek: Fix new design debounce issue (Jiri Benc) [RHEL-191293] +- pinctrl: mediatek: common-v1: Fix EINT breakage on older controllers (Jiri Benc) [RHEL-191293] +- pinctrl: mediatek: Fix the invalid conditions (Jiri Benc) [RHEL-191293] +- pinctrl: mediatek: Add EINT support for multiple addresses (Jiri Benc) [RHEL-191293] +- pinctrl: mediatek: Drop mtk_pinconf_bias_set_pd() (Jiri Benc) [RHEL-191293] +- pinctrl: mediatek: add support for MTK_PULL_PD_TYPE (Jiri Benc) [RHEL-191293] +- x86/cpu: Enable FSGSBASE early in cpu_init_exception_handling() (Steve Best) [RHEL-211103] +- cpufreq: intel_pstate: Sync policy->cur during CPU offline (Steve Best) [RHEL-210859] +- platform/x86/amd/hsmp: Clamp ioctl/send_message indices (Spectre v1) (Steve Best) [RHEL-208745] +- xfs: resample the data fork mapping after cycling ILOCK (Carlos Maiolino) [RHEL-193944] +- KVM: s390: Fix S390_USER_OPEREXEC enablement without STFLE 74 (Christoph Schlameuss) [RHEL-158929] +- procfs: fix possible double mmput() in do_procmap_query() (Rafael Aquini) [RHEL-189666] {CVE-2026-23199} +- procfs: avoid fetching build ID while holding VMA lock (Rafael Aquini) [RHEL-189666] {CVE-2026-23199} +- i2c: tegra: Fix NOIRQ suspend/resume (Charles Mirabile) [RHEL-174252] +- i2c: tegra: Update Tegra410 I2C timing parameters (Charles Mirabile) [RHEL-174252] +- i2c: tegra: Disable fair arbitration for non-MCTP buses (Charles Mirabile) [RHEL-174252] +- i2c: tegra: use dmaengine_get_dma_device() for DMA buffer allocation (Charles Mirabile) [RHEL-174252] +- isofs: validate Rock Ridge CE continuation extent against volume size (CKI Backport Bot) [RHEL-187413] {CVE-2026-46303} +- intel_idle: Add Panther Lake C-states table (Steve Best) [RHEL-185572] +- KVM: s390: selftests: Add IRQ routing address offset tests (Christoph Schlameuss) [RHEL-183882] +- KVM: s390: Limit adapter indicator access to mapped page (Christoph Schlameuss) [RHEL-183882] +- tools/power/x86/intel-speed-select: Fix output when running on unsupported CLX platforms (Steve Best) [RHEL-184884] +- tools/power/x86/intel-speed-select: Fix some program return value (Steve Best) [RHEL-184884] +- tools/power/x86/intel-speed-select: Fix cpu extended family ID decoding (Steve Best) [RHEL-184884] +- platform/x86/intel/tpmi/plr: Prevent fault during unbind (Steve Best) [RHEL-182358] +- Revert "Drivers: hv: Add CONFIG_HYPERV_VMBUS option" (Karol Herbst) [RHEL-170737] +- Revert "drm/i915: Use preempt_disable/enable_rt() where recommended" (Karol Herbst) [RHEL-170737] +- Revert "drm/gem: fix build for mm_get_unmapped_area() call after backmerge" (Karol Herbst) [RHEL-170737] +- Partiall revert "mm: update shmem_[kernel]_file_*() functions to use vma_flags_t" (Karol Herbst) [RHEL-170737] +- drm: add 4th argument to vfs_parse_fs_string calls (Karol Herbst) [RHEL-170737] +- redhat/configs: Add new configs from DRM 7.0 backport (Karol Herbst) [RHEL-170737] +- Merge DRM changes from upstream v6.19..v7.0 (Karol Herbst) [RHEL-170737] +Resolves: RHEL-158929, RHEL-170737, RHEL-174252, RHEL-182358, RHEL-183882, RHEL-184884, RHEL-185572, RHEL-187413, RHEL-189556, RHEL-189666, RHEL-191293, RHEL-193944, RHEL-208745, RHEL-210859, RHEL-211103, RHEL-212108, RHEL-212367, RHEL-213294, RHEL-213537, RHEL-214083 + +* Tue Jul 28 2026 CKI KWF Bot [6.12.0-252.el10] +- Revert "selftests/pidfd: add tests for PIDFD_SELF_*" (John J Coleman) [RHEL-214159] +- Revert "selftests/mm: Use PKEY_UNRESTRICTED macro" (John J Coleman) [RHEL-214159] +- Revert "selftests/powerpc: Use PKEY_UNRESTRICTED macro" (John J Coleman) [RHEL-214159] +- Revert "selftest/powerpc/mm/pkey: fix build-break introduced by commit 00894c3fc917" (John J Coleman) [RHEL-214159] +- Revert "selftests/mm: fix faulting-in code in pagemap_ioctl test" (John J Coleman) [RHEL-214159] +- Bluetooth: btusb: MT7925: Add VID/PID 13d3/3609 (Jiri Benc) [RHEL-191262] +- redhat/configs: enable CONFIG_SERIAL_8250_MT6577 (Jiri Benc) [RHEL-191347] +- serial: 8250_mtk: Add ACPI support (Jiri Benc) [RHEL-191347] +- serial: 8250_mtk: Enable baud clock and manage in runtime PM (Jiri Benc) [RHEL-191347] +- serial: 8250_platform: Remove unneeded ->iotype assignment (Jiri Benc) [RHEL-191347] +- usb: typec: ucsi: skip connector validation before init (Desnes Nunes) [RHEL-147800] +- usb: host: xhci-sideband: delegate offload_usage tracking to class drivers (Desnes Nunes) [RHEL-147800] +- usb: core: use dedicated spinlock for offload state (Desnes Nunes) [RHEL-147800] +- usb: cdns3: gadget: fix state inconsistency on gadget init failure (Desnes Nunes) [RHEL-147800] {CVE-2026-31754} +- usb: dwc3: imx8mp: fix memory leak on probe failure path (Desnes Nunes) [RHEL-147800] +- usb: ulpi: fix memory leak on ulpi_register() error paths (Desnes Nunes) [RHEL-147800] {CVE-2026-46109} +- usb: ulpi: fix double free in ulpi_register_interface() error path (Desnes Nunes) [RHEL-147800] {CVE-2026-31759} +- usb: misc: usbio: Fix URB memory leak on submit failure (Desnes Nunes) [RHEL-147800] {CVE-2026-31757} +- USB: core: add NO_LPM quirk for Razer Kiyo Pro webcam (Desnes Nunes) [RHEL-147800] +- usb: cdns3: gadget: fix NULL pointer dereference in ep_queue (Desnes Nunes) [RHEL-147800] {CVE-2026-31755} +- usb: core: phy: avoid double use of 'usb3-phy' (Desnes Nunes) [RHEL-147800] +- USB: serial: option: add MeiG Smart SRM825WN (Desnes Nunes) [RHEL-147800] +- dt-bindings: connector: add pd-disable dependency (Desnes Nunes) [RHEL-147800] +- usb: typec: thunderbolt: Set enter_vdo during initialization (Desnes Nunes) [RHEL-147800] +- usb: typec: Remove alt->adev.dev.class assignment (Desnes Nunes) [RHEL-147800] +- usb: dwc2: gadget: Fix spin_lock/unlock mismatch in dwc2_hsotg_udc_stop() (Desnes Nunes) [RHEL-147800] {CVE-2026-31756} +- usb: quirks: add DELAY_INIT quirk for another Silicon Motion flash drive (Desnes Nunes) [RHEL-147800] +- cdc-acm: new quirk for EPSON HMD (Desnes Nunes) [RHEL-147800] +- usb: typec: ucsi: validate connector number in ucsi_notify_common() (Desnes Nunes) [RHEL-147800] {CVE-2026-31729} +- usb: usbtmc: Flush anchored URBs in usbtmc_release (Desnes Nunes) [RHEL-147800] {CVE-2026-31758} +- USB: serial: io_edgeport: add support for Blackbox IC135A (Desnes Nunes) [RHEL-147800] +- USB: serial: option: add missing RSVD(5) flag for Rolling RW135R-GL (Desnes Nunes) [RHEL-147800] +- USB: serial: option: add support for Rolling Wireless RW135R-GL (Desnes Nunes) [RHEL-147800] +- USB: ezcap401 needs USB_QUIRK_NO_BOS to function on 10gbs usb speed (Desnes Nunes) [RHEL-147800] +- usb: roles: get usb role switch from parent only for usb-b-connector (Desnes Nunes) [RHEL-147800] +- Revert "tcpm: allow looking for role_sw device in the main node" (Desnes Nunes) [RHEL-147800] +- usb: typec: altmode/displayport: set displayport signaling rate in configure message (Desnes Nunes) [RHEL-147800] +- usb: dwc3: pci: add support for the Intel Nova Lake -H (Desnes Nunes) [RHEL-147800] +- usb/core/quirks: Add Huawei ME906S-device to wakeup quirk (Desnes Nunes) [RHEL-147800] +- usb: xhci: Prevent interrupt storm on host controller error (HCE) (Desnes Nunes) [RHEL-147800] {CVE-2026-43488} +- usb: xhci: Fix memory leak in xhci_disable_slot() (Desnes Nunes) [RHEL-147800] {CVE-2026-43432} +- usb: class: cdc-wdm: fix reordering issue in read code path (Desnes Nunes) [RHEL-147800] {CVE-2026-43427} +- usb: cdc-acm: Restore CAP_BRK functionnality to CH343 (Desnes Nunes) [RHEL-147800] +- usb: core: new quirk to handle devices with zero configurations (Desnes Nunes) [RHEL-147800] +- usb: misc: uss720: properly clean up reference in uss720_probe() (Desnes Nunes) [RHEL-147800] +- USB: core: Limit the length of unkillable synchronous timeouts (Desnes Nunes) [RHEL-147800] {CVE-2026-43428} +- USB: usbtmc: Use usb_bulk_msg_killable() with user-specified timeouts (Desnes Nunes) [RHEL-147800] {CVE-2026-43429} +- USB: usbcore: Introduce usb_bulk_msg_killable() (Desnes Nunes) [RHEL-147800] +- usb: core: don't power off roothub PHYs if phy_set_mode() fails (Desnes Nunes) [RHEL-147800] +- thunderbolt: Fix property read in nhi_wake_supported() (Desnes Nunes) [RHEL-147800] +- qmi_wwan: allow max_mtu above hard_mtu to control rx_urb_size (Desnes Nunes) [RHEL-147800] +- usbnet: limit max_mtu based on device's hard_mtu (Desnes Nunes) [RHEL-147800] +- net: usb: r8152: add TRENDnet TUC-ET2G (Desnes Nunes) [RHEL-147800] +- usb: image: mdc800: kill download URB on timeout (Desnes Nunes) [RHEL-147800] {CVE-2026-43425} +- usb: mdc800: handle signal and read racing (Desnes Nunes) [RHEL-147800] +- USB: add QUIRK_NO_BOS for video capture several devices (Desnes Nunes) [RHEL-147800] +- usb: typec: ucsi: Add Thunderbolt alternate mode support (Desnes Nunes) [RHEL-147800] +- usb: phy: tegra: parametrize PORTSC1 register offset (Desnes Nunes) [RHEL-147800] +- usb: phy: tegra: parametrize HSIC PTS value (Desnes Nunes) [RHEL-147800] +- usb: phy: tegra: return error value from utmi_wait_register (Desnes Nunes) [RHEL-147800] +- usb: phy: tegra: cosmetic fixes (Desnes Nunes) [RHEL-147800] +- usb: dwc2: fix resume failure if dr_mode is host (Desnes Nunes) [RHEL-147800] +- usb: cdns3: fix role switching during resume (Desnes Nunes) [RHEL-147800] {CVE-2026-45911} +- usb: dwc3: gadget: Move vbus draw to workqueue context (Desnes Nunes) [RHEL-147800] {CVE-2026-43170} +- phy: tegra: xusb: Remove unused powered_on variable (Desnes Nunes) [RHEL-147800] +- net: usb: introduce usbnet_mii_ioctl helper function (Desnes Nunes) [RHEL-147800] +- net: usb: remove unnecessary get_drvinfo code and driver versions (Desnes Nunes) [RHEL-147800] +- net: usb: replace unnecessary get_link functions with usbnet_get_link (Desnes Nunes) [RHEL-147800] +- net: usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock (Desnes Nunes) [RHEL-147800] {CVE-2025-40120} +- net: usb: asix_devices: Fix PHY address mask in MDIO bus initialization (Desnes Nunes) [RHEL-147800] {CVE-2025-38736} +- net: usb: asix_devices: add phy_mask for ax88772 mdio bus (Desnes Nunes) [RHEL-147800] {CVE-2025-38725} +- usbnet: asix AX88772: leave the carrier control to phylink (Desnes Nunes) [RHEL-147800] +- docs: fix 're-use' -> 'reuse' in documentation (Desnes Nunes) [RHEL-147800] +- thermal/qcom/lmh: Replace IRQF_ONESHOT with IRQF_NO_THREAD (Desnes Nunes) [RHEL-147800] +- char: tpm: cr50: Remove IRQF_ONESHOT (Desnes Nunes) [RHEL-147800] +- usb: typec: fusb302: Remove IRQF_ONESHOT (Desnes Nunes) [RHEL-147800] +- genirq: Set IRQF_COND_ONESHOT in devm_request_irq(). (Desnes Nunes) [RHEL-147800] +- USB: serial: option: add Telit FN920C04 RNDIS compositions (Desnes Nunes) [RHEL-147800] +- usb: dwc3: Log dwc3 address in traces (Desnes Nunes) [RHEL-147800] +- usb: gadget: tegra-xudc: Add handling for BLCG_COREPLL_PWRDN (Desnes Nunes) [RHEL-147800] +- usb: phy: tegra: add HSIC support (Desnes Nunes) [RHEL-147800] +- usb: phy: tegra: use phy type directly (Desnes Nunes) [RHEL-147800] +- usb: typec: ucsi: Support mode selection to activate altmodes (Desnes Nunes) [RHEL-147800] +- usb: typec: Introduce mode_selection bit (Desnes Nunes) [RHEL-147800] +- usb: typec: Implement mode selection (Desnes Nunes) [RHEL-147800] +- usb: typec: Expose alternate mode priority via sysfs (Desnes Nunes) [RHEL-147800] +- usb: typec: Add mode_control field to port property (Desnes Nunes) [RHEL-147800] +- usb: phy: generic: Convert to device property API (Desnes Nunes) [RHEL-147800] +- usb: phy: generic: Convert to dev_err_probe() (Desnes Nunes) [RHEL-147800] +- usb: phy: generic: Convert to devm_clk_get_optional() (Desnes Nunes) [RHEL-147800] +- usb: phy: generic: Always use dev in usb_phy_generic_probe() (Desnes Nunes) [RHEL-147800] +- usbip: Reduce CONNRESET message noise in dmesg from stub (Desnes Nunes) [RHEL-147800] +- tools: usb: usbip: remove dead-link from README (Desnes Nunes) [RHEL-147800] +- xhci: dbc: allow setting manufacturer string through sysfs (Desnes Nunes) [RHEL-147800] +- xhci: dbc: allow setting product string through sysfs (Desnes Nunes) [RHEL-147800] +- xhci: dbc: allow setting device serial number through sysfs (Desnes Nunes) [RHEL-147800] +- xhci: dbc: prepare to expose strings through sysfs (Desnes Nunes) [RHEL-147800] +- dt-bindings: phy: renesas,usb2-phy: Document mux-states property (Desnes Nunes) [RHEL-147800] +- dt-bindings: phy: renesas,usb2-phy: Document USB VBUS regulator (Desnes Nunes) [RHEL-147800] +- phy: fsl-imx8mq-usb: enable RX Termination override (Desnes Nunes) [RHEL-147800] +- phy: fsl-imx8mq-usb: set platform driver data (Desnes Nunes) [RHEL-147800] {CVE-2026-43259} +- phy: fsl-imx8mq-usb: disable bind/unbind platform driver feature (Desnes Nunes) [RHEL-147800] +- net: thunderbolt: Allow reading link settings (Desnes Nunes) [RHEL-147800] +- bonding: 3ad: Add support for SPEED_80000 (Desnes Nunes) [RHEL-147800] +- net: thunderbolt: Allow changing MAC address of the device (Desnes Nunes) [RHEL-147800] +- usb: misc: onboard_dev: Add WCH CH334 USB2.0 Hub (1a86:8091) (Desnes Nunes) [RHEL-147800] +- dt-bindings: usb: Add binding for WCH CH334/CH335 hub controller (Desnes Nunes) [RHEL-147800] +- usb: dwc3: Add dwc pointer to dwc3_readl/writel (Desnes Nunes) [RHEL-147800] +- usb: dwc3: Remove of dep->regs (Desnes Nunes) [RHEL-147800] +- usb: chipidea: udc: fix DMA and SG cleanup in _ep_nuke() (Desnes Nunes) [RHEL-147800] {CVE-2026-43250} +- usb: chipidea: ci_hdrc_imx: use "wakeup" suffix for wakeup interrupt name (Desnes Nunes) [RHEL-147800] +- USB: HCD: remove logic about which hcd is loaded (Desnes Nunes) [RHEL-147800] +- usb: dwc3: imx8mp: disable auto suspend for host role (Desnes Nunes) [RHEL-147800] +- usb: dwc3: imx8mp: rename dwc3 to dwc3_pdev in struct dwc3_imx8mp (Desnes Nunes) [RHEL-147800] +- usb: dwc3: imx8mp: fix device leak at unbind (Desnes Nunes) [RHEL-147800] +- usb: dwc3: drd: extend dwc3_pre_set_role() to extcon and otg usecase (Desnes Nunes) [RHEL-147800] +- phy: qcom: qmp-combo: Add polarity inversion support for SAR2130P (Desnes Nunes) [RHEL-147800] +- USB: core: Discard pm_runtime_put() return value (Desnes Nunes) [RHEL-147800] +- usb: typec: ucsi: drop an unused Kconfig symbol (Desnes Nunes) [RHEL-147800] +- USB: host: drop unneeded dependency on OF_GPIO (Desnes Nunes) [RHEL-147800] +- usb: isp1362-hcd: remove Philips ISP1362 USB OTG controller driver (Desnes Nunes) [RHEL-147800] +- USB: typec: tcpm: Fix a typo (Desnes Nunes) [RHEL-147800] +- thunderbolt: Log path activation failures without WARN backtraces (Desnes Nunes) [RHEL-147800] +- phy: core: Simplify with scoped for each OF child loop (Desnes Nunes) [RHEL-147800] +- phy: core: Reinstate pm_runtime_enabled() check in phy_pm_runtime_put() (Desnes Nunes) [RHEL-147800] +- docs: admin-guide: thunderbolt: Replace ifconfig with ip (Desnes Nunes) [RHEL-147800] +- phy: qualcomm: qmp-combo: Add DP offsets and settings for Glymur platforms (Desnes Nunes) [RHEL-147800] +- phy: qualcomm: qmp-combo: Update QMP PHY with Glymur settings (Desnes Nunes) [RHEL-147800] +- phy: qualcomm: Update the QMP clamp register for V6 (Desnes Nunes) [RHEL-147800] +- phy: qualcomm: qmp-usb: Add support for Glymur USB UNI PHY (Desnes Nunes) [RHEL-147800] +- dt-bindings: phy: qcom,qmp-usb: Add Glymur USB UNI PHY compatible (Desnes Nunes) [RHEL-147800] +- dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: Add Glymur compatible (Desnes Nunes) [RHEL-147800] +- phy: qcom: qmp-usbc: Fix out-of-bounds array access in dp swing config (Desnes Nunes) [RHEL-147800] +- phy: qcom: qmp-usbc: Add QCS615 USB/DP PHY config and DP mode support (Desnes Nunes) [RHEL-147800] +- phy: qcom: qmp: Add DP v2 PHY register definitions (Desnes Nunes) [RHEL-147800] +- phy: qcom: qmp-usbc: Add USB/DP exclude handling (Desnes Nunes) [RHEL-147800] +- phy: qcom: qmp-usbc: Add DP PHY ops for USB/DP switchable Type-C PHYs (Desnes Nunes) [RHEL-147800] +- phy: qcom: qmp-usbc: Add TCSR parsing and PHY mode setting (Desnes Nunes) [RHEL-147800] +- phy: qcom: qmp-usbc: Move USB-only init to usb_power_on (Desnes Nunes) [RHEL-147800] +- phy: qcom: qmp-usbc: add DP link and vco_div clocks for DP PHY (Desnes Nunes) [RHEL-147800] +- phy: qcom: qmp-usbc: Move reset config into PHY cfg (Desnes Nunes) [RHEL-147800] +- phy: qcom: qmp-usbc: Add regulator init_load support (Desnes Nunes) [RHEL-147800] +- phy: qcom: qmp-usbc: Add DP-related fields for USB/DP switchable PHY (Desnes Nunes) [RHEL-147800] +- phy: qcom: qmp-usbc: Rename USB-specific ops to prepare for DP support (Desnes Nunes) [RHEL-147800] +- dt-bindings: phy: Add QMP USB3+DP PHY for QCS615 (Desnes Nunes) [RHEL-147800] +- phy: fsl-imx8mq-usb: change ssc_range value for i.MX8MQ (Desnes Nunes) [RHEL-147800] +- phy: core: Discard pm_runtime_put() return values (Desnes Nunes) [RHEL-147800] +- usb: gadget: Constify struct configfs_item_operations and configfs_group_operations (Desnes Nunes) [RHEL-147800] +- configfs: Constify ct_item_ops in struct config_item_type (Desnes Nunes) [RHEL-147800] +- configfs: Constify ct_group_ops in struct config_item_type (Desnes Nunes) [RHEL-147800] +- usb: linux/usb.h: Correct the description of the usb_device_driver member (Desnes Nunes) [RHEL-147800] +- usb: typec: ucsi: psy: Fix voltage and current max for non-Fixed PDOs (Desnes Nunes) [RHEL-147800] +- usb: typec: ucsi: psy: Fix ucsi_psy_get_current_now in non-PD cases (Desnes Nunes) [RHEL-147800] +- dt-bindings: usb: ehci/ohci: Allow "dma-coherent" (Desnes Nunes) [RHEL-147800] +- usb: typec: Export typec bus and typec altmode device type (Desnes Nunes) [RHEL-147800] +- usb: typec: Set the bus also for the port and plug altmodes (Desnes Nunes) [RHEL-147800] +- ASoC: Intel: sof_sdw: append dai type to dai link name unconditionally (Jaroslav Kysela) [RHEL-180892] +- ACPI: bus: Fix MFD child automatic modprobe issue (Mark Langsdorf) [RHEL-173575] +- ACPI: video: Switch over to auxiliary bus type (Mark Langsdorf) [RHEL-173575] +- ACPI: video: Convert the driver to a platform one (Mark Langsdorf) [RHEL-173575] +- iommupt: Fixup build warning by using BIT_ULL() for RISCVPT_NC/IO (Jennifer Berringer) [RHEL-174808] +- iommupt: Encode IOMMU_MMIO/IOMMU_CACHE via RISC-V Svpbmt bits (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Advertise Svpbmt support to generic page table (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Add ACPI support (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Remove overflows on the invalidation path (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Fix signedness bug (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Stop polling when CQCSR reports an error (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Allow RISC_VIOMMU to COMPILE_TEST (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Add missing GENERIC_MSI_IRQ (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Enable SVNAPOT support for contiguous ptes (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Use the generic iommu page table (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Disable SADE (Jennifer Berringer) [RHEL-174808] +- iommupt: Add the RISC-V page table format (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Skip IRQ count check when using MSI interrupts (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Add IOTINVAL after updating DDT/PDT entries (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Simplify maximum determination in riscv_iommu_init_check() (Jennifer Berringer) [RHEL-174808] +- iommu: make inclusion of riscv directory conditional (Jennifer Berringer) [RHEL-174808] +- iommu: Pass in old domain to attach_dev callback functions (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: prevent NULL deref in iova_to_phys (Jennifer Berringer) [RHEL-174808] {CVE-2025-39699} +- iommu: Remove ops.pgsize_bitmap from drivers that don't use it (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Update to use iommu_alloc_pages_node_lg2() (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Convert to use struct iommu_pages_list (Jennifer Berringer) [RHEL-174808] +- iommu/pages: Remove iommu_free_page() (Jennifer Berringer) [RHEL-174808] +- iommu/pages: Remove iommu_alloc_page_node() (Jennifer Berringer) [RHEL-174808] +- iommu/pages: Remove the order argument to iommu_free_pages() (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Fixup compile warning (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Add shutdown function for iommu driver (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Empty iommu queue before enabling it (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Add support for platform msi (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Paging domain support (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Command and fault queue support (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Device directory management. (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Enable IOMMU registration and device probe. (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Add RISC-V IOMMU PCIe device driver (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Add RISC-V IOMMU platform device driver (Jennifer Berringer) [RHEL-174808] +- redhat/configs: Enable RISC-V IOMMU (Jennifer Berringer) [RHEL-174808] +- sctp: fix OOB write to userspace in sctp_getsockopt_peer_auth_chunks (Xin Long) [RHEL-152730] +- sctp: disable BH before calling udp_tunnel_xmit_skb() (Xin Long) [RHEL-152730] +- sctp: fix missing encap_port propagation for GSO fragments (Xin Long) [RHEL-152730] +- sctp: move SCTP_CMD_ASSOC_SHKEY right after SCTP_CMD_PEER_INIT (Xin Long) [RHEL-152730] +- scsi: megaraid_sas: Fix NULL pointer dereference on firmware duplicate completion (Chandrakanth Patil) [RHEL-141214] +- scsi: megaraid_sas: Protect more code with instance->reset_mutex (Chandrakanth Patil) [RHEL-141214] +Resolves: RHEL-141214, RHEL-147800, RHEL-152730, RHEL-173575, RHEL-174808, RHEL-180892, RHEL-191262, RHEL-191347, RHEL-214159 + +* Fri Jul 24 2026 CKI KWF Bot [6.12.0-251.el10] +- s390/sclp: Allow PCI reports for NVMe SMART data (Jan Polensky) [RHEL-188089] +- riscv: mm: Fix conflict in arch_tlbbatch_add_pending() (Jennifer Berringer) [RHEL-212287] +- arm64: dts: s32g3: Fix SWT8 watchdog address (Jared Kangas) [RHEL-212089] +- iio: adc: nxp-sar-adc: Fix the delay calculation in nxp_sar_adc_wait_for() (Jared Kangas) [RHEL-212089] +- iio: adc: nxp-sar-adc: harden buffer ISR against per-channel read failure (Jared Kangas) [RHEL-212089] +- iio: adc: nxp-sar-adc: Remove unnecessary type casting (Jared Kangas) [RHEL-212089] +- iio: core: fix uninitialized data in debugfs (Jared Kangas) [RHEL-212089] +- iio: buffer: Move from int64_t to s64 for timestamp (Jared Kangas) [RHEL-212089] +- iio: buffer: Fix DMA fence leak in iio_buffer_enqueue_dmabuf() (Jared Kangas) [RHEL-212089] +- iio: Replace 'sign' field with union in struct iio_scan_type (Jared Kangas) [RHEL-212089] +- iio: buffer: ensure repeat alignment is a power of two (Jared Kangas) [RHEL-212089] +- iio: buffer: cache timestamp offset in scan buffer (Jared Kangas) [RHEL-212089] +- iio: buffer: check return value of iio_compute_scan_bytes() (Jared Kangas) [RHEL-212089] +- iio: core: Clean up device correctly on viio_trigger_alloc() failure (Jared Kangas) [RHEL-212089] +- iio: core: Simplify IIO core managed APIs (Jared Kangas) [RHEL-212089] +- iio: inkern: call iio_device_put() only on mapped devices (Jared Kangas) [RHEL-212089] +- iio: Fix fwnode_handle in __fwnode_iio_channel_get_by_name() (Jared Kangas) [RHEL-212089] +- dmaengine: fsl-edma: Use dev_err_probe() to simplify code (Jared Kangas) [RHEL-212089] +- dmaengine: fsl-edma: Use managed API dmaenginem_async_device_register() (Jared Kangas) [RHEL-212089] +- dmaengine: of_dma: Add devm_of_dma_controller_register() (Jared Kangas) [RHEL-212089] +- dt-bindings: dma: fsl-edma: add dma-channel-mask property description (Jared Kangas) [RHEL-212089] +- dmaengine: fsl-edma: don't explicitly disable clocks in .remove() (Jared Kangas) [RHEL-212089] +- dmaengine: fsl-edma: drop unused module alias (Jared Kangas) [RHEL-212089] +- dmaengine: fsl-edma: configure tcd attr with separate src and dst settings (Jared Kangas) [RHEL-212089] +- dmaengine: fsl-edma: Fix clk leak on alloc_chan_resources failure (Jared Kangas) [RHEL-212089] +- dmaengine: fsl-edma: Remove redundant check in fsl_edma_free_chan_resources() (Jared Kangas) [RHEL-212089] +- dmaengine: fsl-edma: fix channel parameter config for fixed channel requests (Jared Kangas) [RHEL-212089] +- i2c: imx: fix clock and pinctrl state inconsistency in runtime PM (Jared Kangas) [RHEL-212089] +- i2c: imx: zero-initialize dma_slave_config for eDMA (Jared Kangas) [RHEL-212089] +- i2c: imx: ensure no clock is generated after last read (Jared Kangas) [RHEL-212089] +- i2c: imx: fix i2c issue when reading multiple messages (Jared Kangas) [RHEL-212089] +- i2c: imx: preserve error state in block data length handler (Jared Kangas) [RHEL-212089] +- vsock: initialize child_ns_mode_locked in vsock_net_init() (Stefano Garzarella) [RHEL-155388] +- ppc/fadump: invoke kmsg_dump in fadump panic path (Mamatha Inamdar) [RHEL-191988] +- futex: Drop CLONE_THREAD requirement for private default hash alloc (Audra Mitchell) [RHEL-193520] {CVE-2026-52973} +- redhat/configs: automotive: enable SENSORS_INA2XX (Jared Kangas) [RHEL-193670] +- hwmon: (ina2xx) Use scoped_guard() to acquire the subsystem lock (Jared Kangas) [RHEL-193670] +- hwmon: (ina2xx) clean up unused define and outdated comment (Jared Kangas) [RHEL-193670] +- hwmon: (ina2xx) Make it easier to add more devices (Jared Kangas) [RHEL-193670] +- hwmon: (ina2xx) Rely on subsystem locking (Jared Kangas) [RHEL-193670] +- hwmon: (ina2xx) make regulator 'vs' support optional (Jared Kangas) [RHEL-193670] +- hwmon: (ina226) Add support for SY24655 (Jared Kangas) [RHEL-193670] +- hwmon: (ina2xx) Add support for INA260 (Jared Kangas) [RHEL-193670] +- hwmon: (ina2xx) Add support for has_alerts configuration flag (Jared Kangas) [RHEL-193670] +- hwmon: (core) Use device name as a fallback in devm_hwmon_device_register_with_info (Jared Kangas) [RHEL-193670] +- hwmon: Support guard() and scoped_guard for subsystem locks (Jared Kangas) [RHEL-193670] +- hwmon: Serialize accesses in hwmon core (Jared Kangas) [RHEL-193670] +- hwmon: Add label support for 64-bit energy attributes (Jared Kangas) [RHEL-193670] +- hwmon: Introduce 64-bit energy attribute support (Jared Kangas) [RHEL-193670] +- redhat/configs: automotive: enable PWM_FSL_FTM as a module (Jared Kangas) [RHEL-210979] +- arm64: dts: s32g: add PWM support for s32g2 and s32g3 (Jared Kangas) [RHEL-210979] +- arm64: dts: s32g: add SAR ADC support for s32g2 and s32g3 (Jared Kangas) [RHEL-210979] +- pwm: Add the S32G support in the Freescale FTM driver (Jared Kangas) [RHEL-210979] +- pwm: fsl-ftm: Drop driver local locking (Jared Kangas) [RHEL-210979] +- pwm: fsl-ftm: Handle clk_get_rate() returning 0 (Jared Kangas) [RHEL-210979] +- selinux: fix incorrect execmem checks on overlayfs (Ondrej Mosnacek) [RHEL-189741] +- Revert "selinux: RHEL-only hotfix for execmem regression" (Ondrej Mosnacek) [RHEL-189741] +- s390/pkey: Check length in pkey_pckmo handler implementation (Ramesh Chhetri) [RHEL-190427] +- s390/pkey: Check length in PKEY_VERIFYPROTK ioctl (Ramesh Chhetri) [RHEL-190428] +- KEYS: trusted: Fix a memory leak in tpm2_load_cmd (CKI Backport Bot) [RHEL-189607] {CVE-2025-71147} +- gpio: pca953x: propagate regulator_enable() error from resume (Jared Kangas) [RHEL-190842] +- gpio: pca953x: drop bitmap_complement() where feasible (Jared Kangas) [RHEL-190842] +- gpio: pca953x: mask interrupts in irq shutdown (Jared Kangas) [RHEL-190842] +- Documentation: gpio: pca953x: clarify interrupt source detection (Jared Kangas) [RHEL-190842] +- gpio: pca953x: handle short interrupt pulses on PCAL devices (Jared Kangas) [RHEL-190842] +- gpio: pca953x: Add support for TCAL6408 TCAL6416 (Jared Kangas) [RHEL-190842] +- dt-bindings: gpio: gpio-pca95xx: Add tcal6408 and tcal6416 (Jared Kangas) [RHEL-190842] +- Documentation: gpio: add TCAL6408 and TCAL6416 (Jared Kangas) [RHEL-190842] +- Documentation: gpio: Add a compatibility and feature list for PCA953x (Jared Kangas) [RHEL-190842] +- gpio: pca953x: clarify log messages about auto increment feature (Jared Kangas) [RHEL-190842] +- gpio: pca953x: enable latch only on edge-triggered inputs (Jared Kangas) [RHEL-190842] +- gpio: Kconfig: Update help for GPIO_PCA953X (Jared Kangas) [RHEL-190842] +- gpio: pca953x: use regmap_update_bits() to improve performance (Jared Kangas) [RHEL-190842] +- gpio: pca953x: Add support for TI TCA6418 (Jared Kangas) [RHEL-190842] +- dt-bindings: gpio: pca95xx: add TI TCA6418 (Jared Kangas) [RHEL-190842] +- gpio: pca953x: fix wrong error probe return value (Jared Kangas) [RHEL-190842] +- gpio: pca953x: fix IRQ storm on system wake up (Jared Kangas) [RHEL-190842] +- gpio: pca953x: Add support for level-triggered interrupts (Jared Kangas) [RHEL-190842] +- dt-bindings: gpio: pca95xx: add Toradex ecgpiol16 (Jared Kangas) [RHEL-190842] +- gpio: pca953x: use value returning setters (Jared Kangas) [RHEL-190842] +- gpio: pca953x: log an error when failing to get the reset GPIO (Jared Kangas) [RHEL-190842] +- gpio: pca953x: Improve interrupt support (Jared Kangas) [RHEL-190842] +- crypto: testmgr - Ignore EEXIST on shash allocation (Thomas Huth) [RHEL-153093] +- crypto: api - Redo lookup on EEXIST (Thomas Huth) [RHEL-153093] +- sched_ext: Convert scx_dump_state() spinlock to raw spinlock (Herton R. Krzesinski) [RHEL-184683] +- net: ipv6: fix NOREF dst use in seg6 and rpl lwtunnels (Antoine Tenart) [RHEL-179292] {CVE-2026-46099} +- dt-bindings: rtc: pcf85063: remove quartz-load-femtofarads restriction for nxp,pcf85063 (CKI Backport Bot) [RHEL-190843] +- rtc: pcf85063: scope pcf85063_config structures (CKI Backport Bot) [RHEL-190843] +- rtc: pcf85063: convert from round_rate() to determine_rate() (CKI Backport Bot) [RHEL-190843] +- rtc: pcf85063: fix incorrect maximum clock rate handling (CKI Backport Bot) [RHEL-190843] +- rtc: pcf85063: add support for RV8063 (CKI Backport Bot) [RHEL-190843] +- rtc: pcf85063: create pcf85063_i2c_probe (CKI Backport Bot) [RHEL-190843] +- dt-bindings: rtc: pcf85063: add binding for RV8063 (CKI Backport Bot) [RHEL-190843] +- rtc: pcf85063: replace dev_err+return with return dev_err_probe (CKI Backport Bot) [RHEL-190843] +- rtc: pcf85063: do a SW reset if POR failed (CKI Backport Bot) [RHEL-190843] +- x86/CPU/AMD: Prevent improper isolation of shared resources in Zen2's op cache (Dennis Chen) [RHEL-188778] {CVE-2025-54518} +- cpufreq: intel_pstate: Use correct scaling factor on Raptor Lake-E (Mark Langsdorf) [RHEL-185959] +- scsi: core: Wake up the error handler when final completions race against each other (CKI Backport Bot) [RHEL-189653] {CVE-2026-23110} +- redhat/kernel.spec: make module and modules-core provides use variant (Jan Stancek) [RHEL-183433] +- iommu: Warn on premature unblock during DMA aliased sibling reset (Eder Zulian) [RHEL-188931] +- iommu: Fix WARN_ON in __iommu_group_set_domain_nofail() due to reset (Eder Zulian) [RHEL-188931] {CVE-2026-52952} +- iommu: Fix ATS invalidation timeouts during __iommu_remove_group_pasid() (Eder Zulian) [RHEL-188931] +- iommu: Fix nested pci_dev_reset_iommu_prepare/done() (Eder Zulian) [RHEL-188931] +- iommu: Fix pasid attach in pci_dev_reset_iommu_prepare/done() (Eder Zulian) [RHEL-188931] +- iommu: Replace per-group resetting_domain with per-gdev blocked flag (Eder Zulian) [RHEL-188931] +- iommu: Fix kdocs of pci_dev_reset_iommu_done() (Eder Zulian) [RHEL-188931] +- iommu: Fix NULL group->domain dereference in pci_dev_reset_iommu_done() (Eder Zulian) [RHEL-188931] +- dm log: fix out-of-bounds write due to region_count overflow (CKI Backport Bot) [RHEL-188552] {CVE-2026-53059} +- crypto: ccp - copy IV using skcipher ivsize (CKI Backport Bot) [RHEL-188465] {CVE-2026-53016} +- crypto: qat - clear AES key schedule from stack (Vladislav Dronov) [RHEL-115836] +- crypto: qat - cancel work on re-enable SR-IOV timeout (Vladislav Dronov) [RHEL-115836] +- crypto: qat - use 2-arg strscpy where destination size is known (Vladislav Dronov) [RHEL-115836] +- PCI/P2PDMA: Add Intel QAT, DSA, IAA devices to whitelist (Vladislav Dronov) [RHEL-115836] +- crypto: qat - validate RSA CRT component lengths (Vladislav Dronov) [RHEL-115836] +- crypto: qat - simplify adf_service_mask_to_string helper (Vladislav Dronov) [RHEL-115836] +- crypto: qat - add KPT support for GEN6 devices (Vladislav Dronov) [RHEL-115836] +- crypto: qat - use pci logging variants for PCI-specific messages (Vladislav Dronov) [RHEL-115836] +- crypto: qat - protect service table iterations with service_lock (Vladislav Dronov) [RHEL-115836] +- crypto: qat - fix restarting state leak on allocation failure (Vladislav Dronov) [RHEL-115836] +- Documentation: qat_rl: make rate limiting wording clearer (Vladislav Dronov) [RHEL-115836] +- crypto: qat - handle sysfs-triggered reset callbacks (Vladislav Dronov) [RHEL-115836] +- crypto: qat - factor out AER reset helpers (Vladislav Dronov) [RHEL-115836] +- crypto: qat - skip restart for down devices (Vladislav Dronov) [RHEL-115836] +- crypto: qat - centralize bus master enable (Vladislav Dronov) [RHEL-115836] +- crypto: qat - notify fatal error before AER reset preparation (Vladislav Dronov) [RHEL-115836] +- crypto: qat - keep VFs enabled during reset (Vladislav Dronov) [RHEL-115836] +- crypto: qat - fix VF2PF work teardown race in adf_disable_sriov() (Vladislav Dronov) [RHEL-115836] +- crypto: qat - remove MODULE_VERSION (Vladislav Dronov) [RHEL-115836] +- crypto: qat - rename adf_ctl_drv.c to adf_module.c (Vladislav Dronov) [RHEL-115836] +- crypto: qat - remove unused character device and IOCTLs (Vladislav Dronov) [RHEL-115836] +- crypto: qat - fix heartbeat error injection (Vladislav Dronov) [RHEL-115836] +- crypto: qat - fix IRQ cleanup on 6xxx probe failure (Vladislav Dronov) [RHEL-115836] {CVE-2026-46060} +- crypto: qat - use swab32 macro (Vladislav Dronov) [RHEL-115836] +- crypto: qat - replace scnprintf() with sysfs_emit() (Vladislav Dronov) [RHEL-115836] +- crypto: qat - fix type mismatch in RAS sysfs show functions (Vladislav Dronov) [RHEL-115836] +- crypto: qat - fix compression instance leak (Vladislav Dronov) [RHEL-115836] +- crypto: qat - use acomp_tfm_ctx() (Vladislav Dronov) [RHEL-115836] +- crypto: qat - disable 420xx AE cluster when lead engine is fused off (Vladislav Dronov) [RHEL-115836] +- crypto: qat - disable 4xxx AE cluster when lead engine is fused off (Vladislav Dronov) [RHEL-115836] +- crypto: qat - add anti-rollback support for GEN6 devices (Vladislav Dronov) [RHEL-115836] +- crypto: qat - add wireless mode support for QAT GEN6 (Vladislav Dronov) [RHEL-115836] +- crypto: qat - fix firmware loading failure for GEN6 devices (Vladislav Dronov) [RHEL-115836] +- crypto: qat - fix indentation of macros in qat_hal.c (Vladislav Dronov) [RHEL-115836] +- crypto: qat - Drop redundant local variables (Vladislav Dronov) [RHEL-115836] +- Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses [partial] (Vladislav Dronov) [RHEL-115836] +- Convert more 'alloc_obj' cases to default GFP_KERNEL arguments [partial] (Vladislav Dronov) [RHEL-115836] +- Convert 'alloc_obj' family to use the new default GFP_KERNEL argument [partial] (Vladislav Dronov) [RHEL-115836] +- treewide: Replace kmalloc with kmalloc_obj for non-scalar types [partial] (Vladislav Dronov) [RHEL-115836] +- zstd: Increase DYNAMIC_BMI2 GCC version cutoff from 4.8 to 11.0 to work around compiler segfault (Vladislav Dronov) [RHEL-115836] +- zstd: Import upstream v1.5.7 (Vladislav Dronov) [RHEL-115836] +- crypto: qat - convert to common field_get() helper (Vladislav Dronov) [RHEL-115836] +- crypto: qat - #undef field_get() before local definition (Vladislav Dronov) [RHEL-115836] +- bitfield: Add non-constant field_{prep,get}() helpers (Vladislav Dronov) [RHEL-115836] +- bitfield: Add less-checking __FIELD_{GET,PREP}() (Vladislav Dronov) [RHEL-115836] +- bitfield: Ensure the return values of helper functions are checked (Vladislav Dronov) [RHEL-115836] +- crypto: qat - Remove dst_null support (Vladislav Dronov) [RHEL-115836] +- qat: don't mess with ->d_name (Vladislav Dronov) [RHEL-115836] +- lib/string_choices: Rearrange functions in sorted order (Vladislav Dronov) [RHEL-115836] +- rxrpc: rxrpc_verify_data ensure rx_dec_buffer alloc (Marc Dionne) [RHEL-178253] +- rxrpc: Fix the ACK parser to extract the SACK table for parsing (Marc Dionne) [RHEL-178253] +- rxrpc: Fix RESPONSE packet verification to extract skb to a linear buffer (Marc Dionne) [RHEL-178253] +- rxrpc: Fix DATA decrypt vs splice() by copying data to buffer in recvmsg (Marc Dionne) [RHEL-178253] +- crypto/krb5, rxrpc: Fix lack of pre-decrypt/pre-verify length checks (Marc Dionne) [RHEL-178253] +- rxrpc: fix oversized RESPONSE authenticator length check (Marc Dionne) [RHEL-178253] {CVE-2026-31635} +- rxrpc: Fix integer overflow in rxgk_verify_response() (Marc Dionne) [RHEL-178253] {CVE-2026-31633} +- rxrpc: Fix leak of rxgk context in rxgk_verify_response() (Marc Dionne) [RHEL-178253] {CVE-2026-31632} +- rxrpc: Fix buffer overread in rxgk_do_verify_authenticator() (Marc Dionne) [RHEL-178253] {CVE-2026-31631} +- rxgk: Fix potential integer overflow in length check (Marc Dionne) [RHEL-178253] {CVE-2026-46039} +- rxrpc: Fix rxkad crypto unalignment handling (Marc Dionne) [RHEL-178253] {CVE-2026-46085} +- rxrpc: Fix memory leaks in rxkad_verify_response() (Marc Dionne) [RHEL-178253] {CVE-2026-46012} +- rxrpc: Fix missing error checks for rxkad encryption/decryption failure (Marc Dionne) [RHEL-178253] +- rxrpc: Also unshare DATA/RESPONSE packets when paged frags are present (Marc Dionne) [RHEL-178253] {CVE-2026-43500} +- rxrpc: Fix conn-level packet handling to unshare RESPONSE packets (Marc Dionne) [RHEL-178253] {CVE-2026-46000} +- rxrpc: only handle RESPONSE during service challenge (Marc Dionne) [RHEL-178253] {CVE-2026-31676} +- Revert "Disable CET when calling tboot shutdown procedure." (Tony Camuso) [RHEL-177961] +- sctp: revalidate list cursor after sctp_sendmsg_to_asoc() in SCTP_SENDALL (CKI Backport Bot) [RHEL-179862] {CVE-2026-46227} +- ipv6: icmp: clear skb2->cb[] in ip6_err_gen_icmpv6_unreach() (Guillaume Nault) [RHEL-172678] {CVE-2026-43038} +- efi: Allow to expose the workqueue via sysfs (Luis Claudio R. Goncalves) [RHEL-175660] +- workqueue: Allow to expose ordered workqueues via sysfs (Luis Claudio R. Goncalves) [RHEL-175660] +- ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data() (CKI Backport Bot) [RHEL-174199] {CVE-2026-43186} +- redhat: disable XEN_PRIVCMD and XENFS (Vitaly Kuznetsov) [RHEL-172496] {CVE-2026-31788 CVE-2026-31787} +- selftests: fib_nexthops: test stale has_v4 on nexthop replace (Guillaume Nault) [RHEL-152711] +- nexthop: fix IPv6 route referencing IPv4 nexthop (Guillaume Nault) [RHEL-152711] +- ipv4: icmp: fix null-ptr-deref in icmp_build_probe() (Guillaume Nault) [RHEL-152711] +- ipv4: nexthop: allocate skb dynamically in rtm_get_nexthop() (Guillaume Nault) [RHEL-152711] +- ipv4: nexthop: avoid duplicate NHA_HW_STATS_ENABLE on nexthop group dump (Guillaume Nault) [RHEL-152711] +- icmp: fix NULL pointer dereference in icmp_tag_validation() (Guillaume Nault) [RHEL-152711] +- net: nexthop: fix percpu use-after-free in remove_nh_grp_entry (Guillaume Nault) [RHEL-152711] +- net: ipv4: fix ARM64 alignment fault in multipath hash seed (Guillaume Nault) [RHEL-152711] +- selftests: net: add ICMP error source address test over xfrm tunnel (Guillaume Nault) [RHEL-152711] +- icmp: fix ICMP error source address when xfrm policy matches (Guillaume Nault) [RHEL-152711] +- icmp: prevent possible overflow in icmp_global_allow() (Guillaume Nault) [RHEL-152711] +- ping: annotate data-races in ping_lookup() (Guillaume Nault) [RHEL-152711] +- xfrm: fix ip_rt_bug race in icmp_route_lookup reverse path (Guillaume Nault) [RHEL-152711] +- inet: RAW sockets using IPPROTO_RAW MUST drop incoming ICMP (Guillaume Nault) [RHEL-152711] +- inet: ping: Fix icmp out counting (Guillaume Nault) [RHEL-152711] +- selftests: fib_nexthops: Add test cases for error routes deletion (Guillaume Nault) [RHEL-152711] +- ipv4: Fix reference count leak when using error routes with nexthop objects (Guillaume Nault) [RHEL-152711] +- inet: frags: flush pending skbs in fqdir_pre_exit() (Guillaume Nault) [RHEL-152711] +- inet: frags: add inet_frag_queue_flush() (Guillaume Nault) [RHEL-152711] +- inet: frags: avoid theoretical race in ip_frag_reinit() (Guillaume Nault) [RHEL-152711] +- net: bonding: fix use-after-free in bond_xmit_broadcast() (CKI Backport Bot) [RHEL-168076] {CVE-2026-31419} +- platform/mellanox: mlxbf-pmc: Remove trailing whitespaces from event names (David Thompson) [RHEL-167064] +- page_pool: store detach_time as ktime_t to avoid false-negatives (Paolo Abeni) [RHEL-152734] +- net: Fix rcu_tasks stall in threaded busypoll (Paolo Abeni) [RHEL-152734] +- net: consume xmit errors of GSO frames (Paolo Abeni) [RHEL-152734] +- net: Drop the lock in skb_may_tx_timestamp() (Paolo Abeni) [RHEL-152734] +- net: remove WARN_ON_ONCE when accessing forward path array (Paolo Abeni) [RHEL-152734] +- net: gro: fix outer network offset (Paolo Abeni) [RHEL-152734] +- net: add proper RCU protection to /proc/net/ptype (Paolo Abeni) [RHEL-152734] +- linkwatch: use __dev_put() in callers to prevent UAF (Paolo Abeni) [RHEL-152734] +- net: fix segmentation of forwarding fraglist GRO (Paolo Abeni) [RHEL-152734] +- dst: fix races in rt6_uncached_list_del() and rt_del_uncached_list() (Paolo Abeni) [RHEL-152734] +- net: update netdev_lock_{type,name} (Paolo Abeni) [RHEL-152734] +- netdev: preserve NETIF_F_ALL_FOR_ALL across TSO updates (Paolo Abeni) [RHEL-152734] +- net: sock: fix hardened usercopy panic in sock_recv_errqueue (Paolo Abeni) [RHEL-152734] +- net: gro: clear skb_shinfo(skb)->hwtstamps in napi_reuse_skb() (Paolo Abeni) [RHEL-152734] +- net: allow alloc_skb_with_frags() to use MAX_SKB_FRAGS (Paolo Abeni) [RHEL-152734] +- net: dst_metadata: fix IP_DF bit not extracted from tunnel headers (Paolo Abeni) [RHEL-152734] +- netlink: support dumping IPv4 multicast addresses (Hangbin Liu) [RHEL-123730] +Resolves: RHEL-115836, RHEL-123730, RHEL-152711, RHEL-152734, RHEL-153093, RHEL-155388, RHEL-167064, RHEL-168076, RHEL-172496, RHEL-172678, RHEL-174199, RHEL-175660, RHEL-177961, RHEL-178253, RHEL-179292, RHEL-179862, RHEL-183433, RHEL-184683, RHEL-185959, RHEL-188089, RHEL-188465, RHEL-188552, RHEL-188778, RHEL-188931, RHEL-189607, RHEL-189653, RHEL-189741, RHEL-190427, RHEL-190428, RHEL-190842, RHEL-190843, RHEL-191988, RHEL-193520, RHEL-193670, RHEL-210979, RHEL-212089, RHEL-212287 + * Wed Jul 15 2026 CKI KWF Bot [6.12.0-250.el10] - flex_proportions: make fprop_new_period() hardirq safe (CKI Backport Bot) [RHEL-189660] {CVE-2026-23168} - PCI/TPH: Expose pcie_tph_get_st_table_loc() (CKI Backport Bot) [RHEL-186643] diff --git a/kernel.spec b/kernel.spec index 71ee8b532..4657c1ccd 100644 --- a/kernel.spec +++ b/kernel.spec @@ -179,15 +179,15 @@ Summary: The Linux kernel %define specrpmversion 6.12.0 %define specversion 6.12.0 %define patchversion 6.12 -%define pkgrelease 250.17 +%define pkgrelease 253.18 %define kversion 6 -%define tarfile_release 6.12.0-250.17.el10nv +%define tarfile_release 6.12.0-253.18.el10nv # This is needed to do merge window version magic %define patchlevel 12 # This allows pkg_release to have configurable %%{?dist} tag -%define specrelease 250.17%{?buildid}%{?dist} +%define specrelease 253.18%{?buildid}%{?dist} # This defines the kabi tarball version -%define kabiversion 6.12.0-250.17.el10nv +%define kabiversion 6.12.0-253.18.el10nv # If this variable is set to 1, a bpf selftests build failure will cause a # fatal kernel package build error @@ -264,6 +264,8 @@ Summary: The Linux kernel %define with_ynl %{?_without_ynl: 0} %{?!_without_ynl: 1} # kernel-debuginfo %define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1} +# kernel-kmap-internal: source-to-module mapping data (JSON) +%define with_kmap %{?_without_kmap: 0} %{?!_without_kmap: 1} # kernel-abi-stablelists %define with_kernel_abi_stablelists %{?_without_kernel_abi_stablelists: 0} %{?!_without_kernel_abi_stablelists: 1} # internal samples and selftests @@ -647,6 +649,10 @@ Summary: The Linux kernel %define _enable_debug_packages 0 %endif +%ifnarch x86_64 ppc64le s390x aarch64 riscv64 +%define with_kmap 0 +%endif + # Architectures we build tools/cpupower on %if 0%{?fedora} %define cpupowerarchs %{ix86} x86_64 ppc64le aarch64 @@ -1120,6 +1126,9 @@ Source489: %{name}-x86_64-automotive-debug-rhel.config # Sources for kernel-tools Source2002: kvm_stat.logrotate +# Sources for kernel-kmap-internal +Source2100: kmap.py + # Some people enjoy building customized kernels from the dist-git in Fedora and # use this to override configuration options. One day they may all use the # source tree, but in the mean time we carry this to support the legacy workflow @@ -1433,6 +1442,27 @@ This package provides debug information for the rv package. # with_tools %endif +%if %{with_kmap} && %{with_base} +%package -n %{name}-kmap-internal +Summary: Kernel source-to-module mapping data and module list +Group: Development/System +BuildRequires: python3 +%description -n %{name}-kmap-internal +The %{name}-kmap-internal package contains a JSON mapping file that describes +which C source files contributed to each kernel module and to the built-in +vmlinux image, and which RPM package each module is shipped in. + +Files installed under /usr/share/%{name}-kmap-internal/: + kernel-map-.json - unified mapping file for all kernel variants containing: + - variants: list of variant names (e.g., ["stock", "rt", "automotive"]) + - source-map: source file mappings + - obj-src: maps kernel objects to source files with variant indices + - src-obj: maps source files to kernel objects with variant indices + - module-map: module to RPM mappings + - module-rpm: maps module names to RPM package names with variant indices + - rpm-modules: maps RPM package names to module names with variant indices +%endif + %if %{with_selftests} %package selftests-internal @@ -1608,8 +1638,8 @@ This package provides less commonly used kernel modules for the %{?2:%{2} }kerne %package %{?1:%{1}-}modules\ Summary: kernel modules to match the %{?2:%{2}-}core kernel\ Provides: %{name}%{?1:-%{1}}-modules-%{_target_cpu} = %{specrpmversion}-%{release}\ -Provides: %{name}-modules-%{_target_cpu} = %{specrpmversion}-%{release}%{uname_suffix %{?1}}\ -Provides: %{name}-modules = %{specrpmversion}-%{release}%{uname_suffix %{?1}}\ +Provides: %{name}%{?1:-%{1}}-modules-%{_target_cpu} = %{specrpmversion}-%{release}%{uname_suffix %{?1}}\ +Provides: %{name}%{?1:-%{1}}-modules = %{specrpmversion}-%{release}%{uname_suffix %{?1}}\ Provides: installonlypkg(kernel-module)\ Provides: %{name}%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{uname_suffix %{?1}}\ Requires: %{name}-uname-r = %{KVERREL}%{uname_suffix %{?1}}\ @@ -1631,8 +1661,8 @@ This package provides commonly used kernel modules for the %{?2:%{2}-}core kerne %package %{?1:%{1}-}modules-core\ Summary: Core kernel modules to match the %{?2:%{2}-}core kernel\ Provides: %{name}%{?1:-%{1}}-modules-core-%{_target_cpu} = %{specrpmversion}-%{release}\ -Provides: %{name}-modules-core-%{_target_cpu} = %{specrpmversion}-%{release}%{uname_suffix %{?1}}\ -Provides: %{name}-modules-core = %{specrpmversion}-%{release}%{uname_suffix %{?1}}\ +Provides: %{name}%{?1:-%{1}}-modules-core-%{_target_cpu} = %{specrpmversion}-%{release}%{uname_suffix %{?1}}\ +Provides: %{name}%{?1:-%{1}}-modules-core = %{specrpmversion}-%{release}%{uname_suffix %{?1}}\ Provides: installonlypkg(kernel-module)\ Provides: %{name}%{?1:-%{1}}-modules-core-uname-r = %{KVERREL}%{uname_suffix %{?1}}\ Requires: %{name}-uname-r = %{KVERREL}%{uname_suffix %{?1}}\ @@ -2998,6 +3028,44 @@ BuildKernel() { %endif fi # $DoModules -eq 1 +%if %{with_kmap} && %{with_base} + # Generate source-to-module mapping data using kmap.py. + # Must run before the next BuildKernel call issues make mrproper, which + # would wipe the .cmd files that kmap.py reads. Skip debug variants + # (same source mapping as the base kernel). + if [[ "$Variant" != *debug* ]]; then + _kmap_bdir=$(pwd) + _kmap_basedir=%{_builddir}/kmap-data + _kmap_merged=$_kmap_basedir/kernel-map.json + _kmap_variant=${Variant:-stock} + _kmap_listprefix=../kernel${Variant:+-${Variant}} + mkdir -p $_kmap_basedir + + # Build kmap.py arguments; merge with existing data if present + _kmap_args="--directory $_kmap_bdir --outputdir $_kmap_basedir --rhel upstream --variant $_kmap_variant --time" + _kmap_args="$_kmap_args --vmlinux-rpm %{name}-core-%{KVERREL}.rpm" + if [ -f "$_kmap_merged" ]; then + _kmap_args="$_kmap_args --input kernel-map.json" + fi + + # Add module list files for module-to-RPM mapping + for _kmap_type in modules-core modules modules-extra modules-internal; do + if [ -f "${_kmap_listprefix}-${_kmap_type}.list" ]; then + _kmap_rpm=%{name}-${_kmap_type}-%{KVERREL}.rpm + _kmap_args="$_kmap_args --module-list ${_kmap_rpm}:${_kmap_listprefix}-${_kmap_type}.list" + fi + done +%if 0%{!?fedora:1} + if [ -f "${_kmap_listprefix}-modules-partner.list" ]; then + _kmap_rpm=%{name}-modules-partner-%{KVERREL}.rpm + _kmap_args="$_kmap_args --module-list ${_kmap_rpm}:${_kmap_listprefix}-modules-partner.list" + fi +%endif + + python3 %{SOURCE2100} $_kmap_args + fi +%endif + remove_depmod_files() { # remove files that will be auto generated by depmod at rpm -i time @@ -3898,6 +3966,14 @@ find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/ popd %endif +%if %{with_kmap} && %{with_base} +# Install kmap data files produced during %build. +_kmap_basedir=%{_builddir}/kmap-data +_kmap_destbase=$RPM_BUILD_ROOT%{_datadir}/%{name}-kmap-internal +mkdir -p $_kmap_destbase +install -m 644 $_kmap_basedir/kernel-map.json $_kmap_destbase/kernel-map-%{KVERREL}.json +%endif + ### ### clean ### @@ -4397,6 +4473,13 @@ fi\ %{_libexecdir}/kselftests %endif +%if %{with_kmap} && %{with_base} +%files -n %{name}-kmap-internal +%defattr(-,root,root) +%dir %{_datadir}/%{name}-kmap-internal +%{_datadir}/%{name}-kmap-internal/kernel-map-%{KVERREL}.json +%endif + # empty meta-package %if %{with_up_base} %ifnarch %nobuildarches noarch @@ -4567,6 +4650,9 @@ fi\ # # %changelog +* Sun Aug 02 2026 Jan Stancek [6.12.0-253.18.el10nv] +- Merge tag 'kernel-6.12.0-253.el10' into main-aie-nv (Jan Stancek) [VOYAGER-1095] + * Fri Jul 17 2026 Jan Stancek [6.12.0-250.17.el10nv] - Merge tag 'kernel-6.12.0-250.el10' into main-aie-nv (Jan Stancek) [VOYAGER-1095] @@ -4719,6 +4805,482 @@ fi\ - redhat: build only for aarch64 64k and x86_64 variants (Jan Stancek) - redhat: set up initial Makefile.variables (Jan Stancek) +* Wed Jul 29 2026 CKI KWF Bot [6.12.0-253.el10] +- redhat: add kmap.py tool and kernel-kmap-internal package (Rado Vrbovsky) +- net/sched: cls_api: Handle TC_ACT_CONSUMED in tcf_qevent_handle (CKI Backport Bot) [RHEL-214083] {CVE-2026-64530} +- x86/fpu: Ensure XFD state on signal delivery (Steve Best) [RHEL-213537] +- platform/x86: intel-hid: Protect ACPI notify handler against recursion (Steve Best) [RHEL-213294] +- iTCO_wdt: mask NMI_NOW bit for update_no_reboot_bit() call (Dennis Chen) [RHEL-212108] +- ksm: use range-walk function to jump over holes in scan_get_next_rmap_item (Rafael Aquini) [RHEL-189556] {CVE-2025-68211} +- i2c: i801: fix hardware state machine corruption in error path (Steve Best) [RHEL-212367] +- gitlab-ci: enable riscv64 builds for c10s and rhel10 (Michael Krausch-Hofmann) +- pinctrl: mediatek: paris: bypass pinctrl GPIO layer in set GPIO direction (Jiri Benc) [RHEL-191293] +- pinctrl: mediatek: eint: Drop base from mtk_eint_chip_write_mask() (Jiri Benc) [RHEL-191293] +- pinctrl: mediatek: make devm allocations safer and clearer in mtk_eint_do_init() (Jiri Benc) [RHEL-191293] +- pinctrl: Use dev_fwnode() (Jiri Benc) [RHEL-191293] +- pinctrl: mediatek: eint: Fix invalid pointer dereference for v1 platforms (Jiri Benc) [RHEL-191293] +- pinctrl: mediatek: paris: use new GPIO line value setter callbacks (Jiri Benc) [RHEL-191293] +- pinctrl: mediatek: paris: don't double-check the GPIO number (Jiri Benc) [RHEL-191293] +- pinctrl: mediatek: common-v1: Fix error checking in mtk_eint_init() (Jiri Benc) [RHEL-191293] +- pinctrl: mediatek: Fix new design debounce issue (Jiri Benc) [RHEL-191293] +- pinctrl: mediatek: common-v1: Fix EINT breakage on older controllers (Jiri Benc) [RHEL-191293] +- pinctrl: mediatek: Fix the invalid conditions (Jiri Benc) [RHEL-191293] +- pinctrl: mediatek: Add EINT support for multiple addresses (Jiri Benc) [RHEL-191293] +- pinctrl: mediatek: Drop mtk_pinconf_bias_set_pd() (Jiri Benc) [RHEL-191293] +- pinctrl: mediatek: add support for MTK_PULL_PD_TYPE (Jiri Benc) [RHEL-191293] +- x86/cpu: Enable FSGSBASE early in cpu_init_exception_handling() (Steve Best) [RHEL-211103] +- cpufreq: intel_pstate: Sync policy->cur during CPU offline (Steve Best) [RHEL-210859] +- platform/x86/amd/hsmp: Clamp ioctl/send_message indices (Spectre v1) (Steve Best) [RHEL-208745] +- xfs: resample the data fork mapping after cycling ILOCK (Carlos Maiolino) [RHEL-193944] +- KVM: s390: Fix S390_USER_OPEREXEC enablement without STFLE 74 (Christoph Schlameuss) [RHEL-158929] +- procfs: fix possible double mmput() in do_procmap_query() (Rafael Aquini) [RHEL-189666] {CVE-2026-23199} +- procfs: avoid fetching build ID while holding VMA lock (Rafael Aquini) [RHEL-189666] {CVE-2026-23199} +- i2c: tegra: Fix NOIRQ suspend/resume (Charles Mirabile) [RHEL-174252] +- i2c: tegra: Update Tegra410 I2C timing parameters (Charles Mirabile) [RHEL-174252] +- i2c: tegra: Disable fair arbitration for non-MCTP buses (Charles Mirabile) [RHEL-174252] +- i2c: tegra: use dmaengine_get_dma_device() for DMA buffer allocation (Charles Mirabile) [RHEL-174252] +- isofs: validate Rock Ridge CE continuation extent against volume size (CKI Backport Bot) [RHEL-187413] {CVE-2026-46303} +- intel_idle: Add Panther Lake C-states table (Steve Best) [RHEL-185572] +- KVM: s390: selftests: Add IRQ routing address offset tests (Christoph Schlameuss) [RHEL-183882] +- KVM: s390: Limit adapter indicator access to mapped page (Christoph Schlameuss) [RHEL-183882] +- tools/power/x86/intel-speed-select: Fix output when running on unsupported CLX platforms (Steve Best) [RHEL-184884] +- tools/power/x86/intel-speed-select: Fix some program return value (Steve Best) [RHEL-184884] +- tools/power/x86/intel-speed-select: Fix cpu extended family ID decoding (Steve Best) [RHEL-184884] +- platform/x86/intel/tpmi/plr: Prevent fault during unbind (Steve Best) [RHEL-182358] +- Revert "Drivers: hv: Add CONFIG_HYPERV_VMBUS option" (Karol Herbst) [RHEL-170737] +- Revert "drm/i915: Use preempt_disable/enable_rt() where recommended" (Karol Herbst) [RHEL-170737] +- Revert "drm/gem: fix build for mm_get_unmapped_area() call after backmerge" (Karol Herbst) [RHEL-170737] +- Partiall revert "mm: update shmem_[kernel]_file_*() functions to use vma_flags_t" (Karol Herbst) [RHEL-170737] +- drm: add 4th argument to vfs_parse_fs_string calls (Karol Herbst) [RHEL-170737] +- redhat/configs: Add new configs from DRM 7.0 backport (Karol Herbst) [RHEL-170737] +- Merge DRM changes from upstream v6.19..v7.0 (Karol Herbst) [RHEL-170737] + +* Tue Jul 28 2026 CKI KWF Bot [6.12.0-252.el10] +- Revert "selftests/pidfd: add tests for PIDFD_SELF_*" (John J Coleman) [RHEL-214159] +- Revert "selftests/mm: Use PKEY_UNRESTRICTED macro" (John J Coleman) [RHEL-214159] +- Revert "selftests/powerpc: Use PKEY_UNRESTRICTED macro" (John J Coleman) [RHEL-214159] +- Revert "selftest/powerpc/mm/pkey: fix build-break introduced by commit 00894c3fc917" (John J Coleman) [RHEL-214159] +- Revert "selftests/mm: fix faulting-in code in pagemap_ioctl test" (John J Coleman) [RHEL-214159] +- Bluetooth: btusb: MT7925: Add VID/PID 13d3/3609 (Jiri Benc) [RHEL-191262] +- redhat/configs: enable CONFIG_SERIAL_8250_MT6577 (Jiri Benc) [RHEL-191347] +- serial: 8250_mtk: Add ACPI support (Jiri Benc) [RHEL-191347] +- serial: 8250_mtk: Enable baud clock and manage in runtime PM (Jiri Benc) [RHEL-191347] +- serial: 8250_platform: Remove unneeded ->iotype assignment (Jiri Benc) [RHEL-191347] +- usb: typec: ucsi: skip connector validation before init (Desnes Nunes) [RHEL-147800] +- usb: host: xhci-sideband: delegate offload_usage tracking to class drivers (Desnes Nunes) [RHEL-147800] +- usb: core: use dedicated spinlock for offload state (Desnes Nunes) [RHEL-147800] +- usb: cdns3: gadget: fix state inconsistency on gadget init failure (Desnes Nunes) [RHEL-147800] {CVE-2026-31754} +- usb: dwc3: imx8mp: fix memory leak on probe failure path (Desnes Nunes) [RHEL-147800] +- usb: ulpi: fix memory leak on ulpi_register() error paths (Desnes Nunes) [RHEL-147800] {CVE-2026-46109} +- usb: ulpi: fix double free in ulpi_register_interface() error path (Desnes Nunes) [RHEL-147800] {CVE-2026-31759} +- usb: misc: usbio: Fix URB memory leak on submit failure (Desnes Nunes) [RHEL-147800] {CVE-2026-31757} +- USB: core: add NO_LPM quirk for Razer Kiyo Pro webcam (Desnes Nunes) [RHEL-147800] +- usb: cdns3: gadget: fix NULL pointer dereference in ep_queue (Desnes Nunes) [RHEL-147800] {CVE-2026-31755} +- usb: core: phy: avoid double use of 'usb3-phy' (Desnes Nunes) [RHEL-147800] +- USB: serial: option: add MeiG Smart SRM825WN (Desnes Nunes) [RHEL-147800] +- dt-bindings: connector: add pd-disable dependency (Desnes Nunes) [RHEL-147800] +- usb: typec: thunderbolt: Set enter_vdo during initialization (Desnes Nunes) [RHEL-147800] +- usb: typec: Remove alt->adev.dev.class assignment (Desnes Nunes) [RHEL-147800] +- usb: dwc2: gadget: Fix spin_lock/unlock mismatch in dwc2_hsotg_udc_stop() (Desnes Nunes) [RHEL-147800] {CVE-2026-31756} +- usb: quirks: add DELAY_INIT quirk for another Silicon Motion flash drive (Desnes Nunes) [RHEL-147800] +- cdc-acm: new quirk for EPSON HMD (Desnes Nunes) [RHEL-147800] +- usb: typec: ucsi: validate connector number in ucsi_notify_common() (Desnes Nunes) [RHEL-147800] {CVE-2026-31729} +- usb: usbtmc: Flush anchored URBs in usbtmc_release (Desnes Nunes) [RHEL-147800] {CVE-2026-31758} +- USB: serial: io_edgeport: add support for Blackbox IC135A (Desnes Nunes) [RHEL-147800] +- USB: serial: option: add missing RSVD(5) flag for Rolling RW135R-GL (Desnes Nunes) [RHEL-147800] +- USB: serial: option: add support for Rolling Wireless RW135R-GL (Desnes Nunes) [RHEL-147800] +- USB: ezcap401 needs USB_QUIRK_NO_BOS to function on 10gbs usb speed (Desnes Nunes) [RHEL-147800] +- usb: roles: get usb role switch from parent only for usb-b-connector (Desnes Nunes) [RHEL-147800] +- Revert "tcpm: allow looking for role_sw device in the main node" (Desnes Nunes) [RHEL-147800] +- usb: typec: altmode/displayport: set displayport signaling rate in configure message (Desnes Nunes) [RHEL-147800] +- usb: dwc3: pci: add support for the Intel Nova Lake -H (Desnes Nunes) [RHEL-147800] +- usb/core/quirks: Add Huawei ME906S-device to wakeup quirk (Desnes Nunes) [RHEL-147800] +- usb: xhci: Prevent interrupt storm on host controller error (HCE) (Desnes Nunes) [RHEL-147800] {CVE-2026-43488} +- usb: xhci: Fix memory leak in xhci_disable_slot() (Desnes Nunes) [RHEL-147800] {CVE-2026-43432} +- usb: class: cdc-wdm: fix reordering issue in read code path (Desnes Nunes) [RHEL-147800] {CVE-2026-43427} +- usb: cdc-acm: Restore CAP_BRK functionnality to CH343 (Desnes Nunes) [RHEL-147800] +- usb: core: new quirk to handle devices with zero configurations (Desnes Nunes) [RHEL-147800] +- usb: misc: uss720: properly clean up reference in uss720_probe() (Desnes Nunes) [RHEL-147800] +- USB: core: Limit the length of unkillable synchronous timeouts (Desnes Nunes) [RHEL-147800] {CVE-2026-43428} +- USB: usbtmc: Use usb_bulk_msg_killable() with user-specified timeouts (Desnes Nunes) [RHEL-147800] {CVE-2026-43429} +- USB: usbcore: Introduce usb_bulk_msg_killable() (Desnes Nunes) [RHEL-147800] +- usb: core: don't power off roothub PHYs if phy_set_mode() fails (Desnes Nunes) [RHEL-147800] +- thunderbolt: Fix property read in nhi_wake_supported() (Desnes Nunes) [RHEL-147800] +- qmi_wwan: allow max_mtu above hard_mtu to control rx_urb_size (Desnes Nunes) [RHEL-147800] +- usbnet: limit max_mtu based on device's hard_mtu (Desnes Nunes) [RHEL-147800] +- net: usb: r8152: add TRENDnet TUC-ET2G (Desnes Nunes) [RHEL-147800] +- usb: image: mdc800: kill download URB on timeout (Desnes Nunes) [RHEL-147800] {CVE-2026-43425} +- usb: mdc800: handle signal and read racing (Desnes Nunes) [RHEL-147800] +- USB: add QUIRK_NO_BOS for video capture several devices (Desnes Nunes) [RHEL-147800] +- usb: typec: ucsi: Add Thunderbolt alternate mode support (Desnes Nunes) [RHEL-147800] +- usb: phy: tegra: parametrize PORTSC1 register offset (Desnes Nunes) [RHEL-147800] +- usb: phy: tegra: parametrize HSIC PTS value (Desnes Nunes) [RHEL-147800] +- usb: phy: tegra: return error value from utmi_wait_register (Desnes Nunes) [RHEL-147800] +- usb: phy: tegra: cosmetic fixes (Desnes Nunes) [RHEL-147800] +- usb: dwc2: fix resume failure if dr_mode is host (Desnes Nunes) [RHEL-147800] +- usb: cdns3: fix role switching during resume (Desnes Nunes) [RHEL-147800] {CVE-2026-45911} +- usb: dwc3: gadget: Move vbus draw to workqueue context (Desnes Nunes) [RHEL-147800] {CVE-2026-43170} +- phy: tegra: xusb: Remove unused powered_on variable (Desnes Nunes) [RHEL-147800] +- net: usb: introduce usbnet_mii_ioctl helper function (Desnes Nunes) [RHEL-147800] +- net: usb: remove unnecessary get_drvinfo code and driver versions (Desnes Nunes) [RHEL-147800] +- net: usb: replace unnecessary get_link functions with usbnet_get_link (Desnes Nunes) [RHEL-147800] +- net: usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock (Desnes Nunes) [RHEL-147800] {CVE-2025-40120} +- net: usb: asix_devices: Fix PHY address mask in MDIO bus initialization (Desnes Nunes) [RHEL-147800] {CVE-2025-38736} +- net: usb: asix_devices: add phy_mask for ax88772 mdio bus (Desnes Nunes) [RHEL-147800] {CVE-2025-38725} +- usbnet: asix AX88772: leave the carrier control to phylink (Desnes Nunes) [RHEL-147800] +- docs: fix 're-use' -> 'reuse' in documentation (Desnes Nunes) [RHEL-147800] +- thermal/qcom/lmh: Replace IRQF_ONESHOT with IRQF_NO_THREAD (Desnes Nunes) [RHEL-147800] +- char: tpm: cr50: Remove IRQF_ONESHOT (Desnes Nunes) [RHEL-147800] +- usb: typec: fusb302: Remove IRQF_ONESHOT (Desnes Nunes) [RHEL-147800] +- genirq: Set IRQF_COND_ONESHOT in devm_request_irq(). (Desnes Nunes) [RHEL-147800] +- USB: serial: option: add Telit FN920C04 RNDIS compositions (Desnes Nunes) [RHEL-147800] +- usb: dwc3: Log dwc3 address in traces (Desnes Nunes) [RHEL-147800] +- usb: gadget: tegra-xudc: Add handling for BLCG_COREPLL_PWRDN (Desnes Nunes) [RHEL-147800] +- usb: phy: tegra: add HSIC support (Desnes Nunes) [RHEL-147800] +- usb: phy: tegra: use phy type directly (Desnes Nunes) [RHEL-147800] +- usb: typec: ucsi: Support mode selection to activate altmodes (Desnes Nunes) [RHEL-147800] +- usb: typec: Introduce mode_selection bit (Desnes Nunes) [RHEL-147800] +- usb: typec: Implement mode selection (Desnes Nunes) [RHEL-147800] +- usb: typec: Expose alternate mode priority via sysfs (Desnes Nunes) [RHEL-147800] +- usb: typec: Add mode_control field to port property (Desnes Nunes) [RHEL-147800] +- usb: phy: generic: Convert to device property API (Desnes Nunes) [RHEL-147800] +- usb: phy: generic: Convert to dev_err_probe() (Desnes Nunes) [RHEL-147800] +- usb: phy: generic: Convert to devm_clk_get_optional() (Desnes Nunes) [RHEL-147800] +- usb: phy: generic: Always use dev in usb_phy_generic_probe() (Desnes Nunes) [RHEL-147800] +- usbip: Reduce CONNRESET message noise in dmesg from stub (Desnes Nunes) [RHEL-147800] +- tools: usb: usbip: remove dead-link from README (Desnes Nunes) [RHEL-147800] +- xhci: dbc: allow setting manufacturer string through sysfs (Desnes Nunes) [RHEL-147800] +- xhci: dbc: allow setting product string through sysfs (Desnes Nunes) [RHEL-147800] +- xhci: dbc: allow setting device serial number through sysfs (Desnes Nunes) [RHEL-147800] +- xhci: dbc: prepare to expose strings through sysfs (Desnes Nunes) [RHEL-147800] +- dt-bindings: phy: renesas,usb2-phy: Document mux-states property (Desnes Nunes) [RHEL-147800] +- dt-bindings: phy: renesas,usb2-phy: Document USB VBUS regulator (Desnes Nunes) [RHEL-147800] +- phy: fsl-imx8mq-usb: enable RX Termination override (Desnes Nunes) [RHEL-147800] +- phy: fsl-imx8mq-usb: set platform driver data (Desnes Nunes) [RHEL-147800] {CVE-2026-43259} +- phy: fsl-imx8mq-usb: disable bind/unbind platform driver feature (Desnes Nunes) [RHEL-147800] +- net: thunderbolt: Allow reading link settings (Desnes Nunes) [RHEL-147800] +- bonding: 3ad: Add support for SPEED_80000 (Desnes Nunes) [RHEL-147800] +- net: thunderbolt: Allow changing MAC address of the device (Desnes Nunes) [RHEL-147800] +- usb: misc: onboard_dev: Add WCH CH334 USB2.0 Hub (1a86:8091) (Desnes Nunes) [RHEL-147800] +- dt-bindings: usb: Add binding for WCH CH334/CH335 hub controller (Desnes Nunes) [RHEL-147800] +- usb: dwc3: Add dwc pointer to dwc3_readl/writel (Desnes Nunes) [RHEL-147800] +- usb: dwc3: Remove of dep->regs (Desnes Nunes) [RHEL-147800] +- usb: chipidea: udc: fix DMA and SG cleanup in _ep_nuke() (Desnes Nunes) [RHEL-147800] {CVE-2026-43250} +- usb: chipidea: ci_hdrc_imx: use "wakeup" suffix for wakeup interrupt name (Desnes Nunes) [RHEL-147800] +- USB: HCD: remove logic about which hcd is loaded (Desnes Nunes) [RHEL-147800] +- usb: dwc3: imx8mp: disable auto suspend for host role (Desnes Nunes) [RHEL-147800] +- usb: dwc3: imx8mp: rename dwc3 to dwc3_pdev in struct dwc3_imx8mp (Desnes Nunes) [RHEL-147800] +- usb: dwc3: imx8mp: fix device leak at unbind (Desnes Nunes) [RHEL-147800] +- usb: dwc3: drd: extend dwc3_pre_set_role() to extcon and otg usecase (Desnes Nunes) [RHEL-147800] +- phy: qcom: qmp-combo: Add polarity inversion support for SAR2130P (Desnes Nunes) [RHEL-147800] +- USB: core: Discard pm_runtime_put() return value (Desnes Nunes) [RHEL-147800] +- usb: typec: ucsi: drop an unused Kconfig symbol (Desnes Nunes) [RHEL-147800] +- USB: host: drop unneeded dependency on OF_GPIO (Desnes Nunes) [RHEL-147800] +- usb: isp1362-hcd: remove Philips ISP1362 USB OTG controller driver (Desnes Nunes) [RHEL-147800] +- USB: typec: tcpm: Fix a typo (Desnes Nunes) [RHEL-147800] +- thunderbolt: Log path activation failures without WARN backtraces (Desnes Nunes) [RHEL-147800] +- phy: core: Simplify with scoped for each OF child loop (Desnes Nunes) [RHEL-147800] +- phy: core: Reinstate pm_runtime_enabled() check in phy_pm_runtime_put() (Desnes Nunes) [RHEL-147800] +- docs: admin-guide: thunderbolt: Replace ifconfig with ip (Desnes Nunes) [RHEL-147800] +- phy: qualcomm: qmp-combo: Add DP offsets and settings for Glymur platforms (Desnes Nunes) [RHEL-147800] +- phy: qualcomm: qmp-combo: Update QMP PHY with Glymur settings (Desnes Nunes) [RHEL-147800] +- phy: qualcomm: Update the QMP clamp register for V6 (Desnes Nunes) [RHEL-147800] +- phy: qualcomm: qmp-usb: Add support for Glymur USB UNI PHY (Desnes Nunes) [RHEL-147800] +- dt-bindings: phy: qcom,qmp-usb: Add Glymur USB UNI PHY compatible (Desnes Nunes) [RHEL-147800] +- dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: Add Glymur compatible (Desnes Nunes) [RHEL-147800] +- phy: qcom: qmp-usbc: Fix out-of-bounds array access in dp swing config (Desnes Nunes) [RHEL-147800] +- phy: qcom: qmp-usbc: Add QCS615 USB/DP PHY config and DP mode support (Desnes Nunes) [RHEL-147800] +- phy: qcom: qmp: Add DP v2 PHY register definitions (Desnes Nunes) [RHEL-147800] +- phy: qcom: qmp-usbc: Add USB/DP exclude handling (Desnes Nunes) [RHEL-147800] +- phy: qcom: qmp-usbc: Add DP PHY ops for USB/DP switchable Type-C PHYs (Desnes Nunes) [RHEL-147800] +- phy: qcom: qmp-usbc: Add TCSR parsing and PHY mode setting (Desnes Nunes) [RHEL-147800] +- phy: qcom: qmp-usbc: Move USB-only init to usb_power_on (Desnes Nunes) [RHEL-147800] +- phy: qcom: qmp-usbc: add DP link and vco_div clocks for DP PHY (Desnes Nunes) [RHEL-147800] +- phy: qcom: qmp-usbc: Move reset config into PHY cfg (Desnes Nunes) [RHEL-147800] +- phy: qcom: qmp-usbc: Add regulator init_load support (Desnes Nunes) [RHEL-147800] +- phy: qcom: qmp-usbc: Add DP-related fields for USB/DP switchable PHY (Desnes Nunes) [RHEL-147800] +- phy: qcom: qmp-usbc: Rename USB-specific ops to prepare for DP support (Desnes Nunes) [RHEL-147800] +- dt-bindings: phy: Add QMP USB3+DP PHY for QCS615 (Desnes Nunes) [RHEL-147800] +- phy: fsl-imx8mq-usb: change ssc_range value for i.MX8MQ (Desnes Nunes) [RHEL-147800] +- phy: core: Discard pm_runtime_put() return values (Desnes Nunes) [RHEL-147800] +- usb: gadget: Constify struct configfs_item_operations and configfs_group_operations (Desnes Nunes) [RHEL-147800] +- configfs: Constify ct_item_ops in struct config_item_type (Desnes Nunes) [RHEL-147800] +- configfs: Constify ct_group_ops in struct config_item_type (Desnes Nunes) [RHEL-147800] +- usb: linux/usb.h: Correct the description of the usb_device_driver member (Desnes Nunes) [RHEL-147800] +- usb: typec: ucsi: psy: Fix voltage and current max for non-Fixed PDOs (Desnes Nunes) [RHEL-147800] +- usb: typec: ucsi: psy: Fix ucsi_psy_get_current_now in non-PD cases (Desnes Nunes) [RHEL-147800] +- dt-bindings: usb: ehci/ohci: Allow "dma-coherent" (Desnes Nunes) [RHEL-147800] +- usb: typec: Export typec bus and typec altmode device type (Desnes Nunes) [RHEL-147800] +- usb: typec: Set the bus also for the port and plug altmodes (Desnes Nunes) [RHEL-147800] +- ASoC: Intel: sof_sdw: append dai type to dai link name unconditionally (Jaroslav Kysela) [RHEL-180892] +- ACPI: bus: Fix MFD child automatic modprobe issue (Mark Langsdorf) [RHEL-173575] +- ACPI: video: Switch over to auxiliary bus type (Mark Langsdorf) [RHEL-173575] +- ACPI: video: Convert the driver to a platform one (Mark Langsdorf) [RHEL-173575] +- iommupt: Fixup build warning by using BIT_ULL() for RISCVPT_NC/IO (Jennifer Berringer) [RHEL-174808] +- iommupt: Encode IOMMU_MMIO/IOMMU_CACHE via RISC-V Svpbmt bits (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Advertise Svpbmt support to generic page table (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Add ACPI support (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Remove overflows on the invalidation path (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Fix signedness bug (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Stop polling when CQCSR reports an error (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Allow RISC_VIOMMU to COMPILE_TEST (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Add missing GENERIC_MSI_IRQ (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Enable SVNAPOT support for contiguous ptes (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Use the generic iommu page table (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Disable SADE (Jennifer Berringer) [RHEL-174808] +- iommupt: Add the RISC-V page table format (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Skip IRQ count check when using MSI interrupts (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Add IOTINVAL after updating DDT/PDT entries (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Simplify maximum determination in riscv_iommu_init_check() (Jennifer Berringer) [RHEL-174808] +- iommu: make inclusion of riscv directory conditional (Jennifer Berringer) [RHEL-174808] +- iommu: Pass in old domain to attach_dev callback functions (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: prevent NULL deref in iova_to_phys (Jennifer Berringer) [RHEL-174808] {CVE-2025-39699} +- iommu: Remove ops.pgsize_bitmap from drivers that don't use it (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Update to use iommu_alloc_pages_node_lg2() (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Convert to use struct iommu_pages_list (Jennifer Berringer) [RHEL-174808] +- iommu/pages: Remove iommu_free_page() (Jennifer Berringer) [RHEL-174808] +- iommu/pages: Remove iommu_alloc_page_node() (Jennifer Berringer) [RHEL-174808] +- iommu/pages: Remove the order argument to iommu_free_pages() (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Fixup compile warning (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Add shutdown function for iommu driver (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Empty iommu queue before enabling it (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Add support for platform msi (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Paging domain support (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Command and fault queue support (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Device directory management. (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Enable IOMMU registration and device probe. (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Add RISC-V IOMMU PCIe device driver (Jennifer Berringer) [RHEL-174808] +- iommu/riscv: Add RISC-V IOMMU platform device driver (Jennifer Berringer) [RHEL-174808] +- redhat/configs: Enable RISC-V IOMMU (Jennifer Berringer) [RHEL-174808] +- sctp: fix OOB write to userspace in sctp_getsockopt_peer_auth_chunks (Xin Long) [RHEL-152730] +- sctp: disable BH before calling udp_tunnel_xmit_skb() (Xin Long) [RHEL-152730] +- sctp: fix missing encap_port propagation for GSO fragments (Xin Long) [RHEL-152730] +- sctp: move SCTP_CMD_ASSOC_SHKEY right after SCTP_CMD_PEER_INIT (Xin Long) [RHEL-152730] +- scsi: megaraid_sas: Fix NULL pointer dereference on firmware duplicate completion (Chandrakanth Patil) [RHEL-141214] +- scsi: megaraid_sas: Protect more code with instance->reset_mutex (Chandrakanth Patil) [RHEL-141214] + +* Fri Jul 24 2026 CKI KWF Bot [6.12.0-251.el10] +- s390/sclp: Allow PCI reports for NVMe SMART data (Jan Polensky) [RHEL-188089] +- riscv: mm: Fix conflict in arch_tlbbatch_add_pending() (Jennifer Berringer) [RHEL-212287] +- arm64: dts: s32g3: Fix SWT8 watchdog address (Jared Kangas) [RHEL-212089] +- iio: adc: nxp-sar-adc: Fix the delay calculation in nxp_sar_adc_wait_for() (Jared Kangas) [RHEL-212089] +- iio: adc: nxp-sar-adc: harden buffer ISR against per-channel read failure (Jared Kangas) [RHEL-212089] +- iio: adc: nxp-sar-adc: Remove unnecessary type casting (Jared Kangas) [RHEL-212089] +- iio: core: fix uninitialized data in debugfs (Jared Kangas) [RHEL-212089] +- iio: buffer: Move from int64_t to s64 for timestamp (Jared Kangas) [RHEL-212089] +- iio: buffer: Fix DMA fence leak in iio_buffer_enqueue_dmabuf() (Jared Kangas) [RHEL-212089] +- iio: Replace 'sign' field with union in struct iio_scan_type (Jared Kangas) [RHEL-212089] +- iio: buffer: ensure repeat alignment is a power of two (Jared Kangas) [RHEL-212089] +- iio: buffer: cache timestamp offset in scan buffer (Jared Kangas) [RHEL-212089] +- iio: buffer: check return value of iio_compute_scan_bytes() (Jared Kangas) [RHEL-212089] +- iio: core: Clean up device correctly on viio_trigger_alloc() failure (Jared Kangas) [RHEL-212089] +- iio: core: Simplify IIO core managed APIs (Jared Kangas) [RHEL-212089] +- iio: inkern: call iio_device_put() only on mapped devices (Jared Kangas) [RHEL-212089] +- iio: Fix fwnode_handle in __fwnode_iio_channel_get_by_name() (Jared Kangas) [RHEL-212089] +- dmaengine: fsl-edma: Use dev_err_probe() to simplify code (Jared Kangas) [RHEL-212089] +- dmaengine: fsl-edma: Use managed API dmaenginem_async_device_register() (Jared Kangas) [RHEL-212089] +- dmaengine: of_dma: Add devm_of_dma_controller_register() (Jared Kangas) [RHEL-212089] +- dt-bindings: dma: fsl-edma: add dma-channel-mask property description (Jared Kangas) [RHEL-212089] +- dmaengine: fsl-edma: don't explicitly disable clocks in .remove() (Jared Kangas) [RHEL-212089] +- dmaengine: fsl-edma: drop unused module alias (Jared Kangas) [RHEL-212089] +- dmaengine: fsl-edma: configure tcd attr with separate src and dst settings (Jared Kangas) [RHEL-212089] +- dmaengine: fsl-edma: Fix clk leak on alloc_chan_resources failure (Jared Kangas) [RHEL-212089] +- dmaengine: fsl-edma: Remove redundant check in fsl_edma_free_chan_resources() (Jared Kangas) [RHEL-212089] +- dmaengine: fsl-edma: fix channel parameter config for fixed channel requests (Jared Kangas) [RHEL-212089] +- i2c: imx: fix clock and pinctrl state inconsistency in runtime PM (Jared Kangas) [RHEL-212089] +- i2c: imx: zero-initialize dma_slave_config for eDMA (Jared Kangas) [RHEL-212089] +- i2c: imx: ensure no clock is generated after last read (Jared Kangas) [RHEL-212089] +- i2c: imx: fix i2c issue when reading multiple messages (Jared Kangas) [RHEL-212089] +- i2c: imx: preserve error state in block data length handler (Jared Kangas) [RHEL-212089] +- vsock: initialize child_ns_mode_locked in vsock_net_init() (Stefano Garzarella) [RHEL-155388] +- ppc/fadump: invoke kmsg_dump in fadump panic path (Mamatha Inamdar) [RHEL-191988] +- futex: Drop CLONE_THREAD requirement for private default hash alloc (Audra Mitchell) [RHEL-193520] {CVE-2026-52973} +- redhat/configs: automotive: enable SENSORS_INA2XX (Jared Kangas) [RHEL-193670] +- hwmon: (ina2xx) Use scoped_guard() to acquire the subsystem lock (Jared Kangas) [RHEL-193670] +- hwmon: (ina2xx) clean up unused define and outdated comment (Jared Kangas) [RHEL-193670] +- hwmon: (ina2xx) Make it easier to add more devices (Jared Kangas) [RHEL-193670] +- hwmon: (ina2xx) Rely on subsystem locking (Jared Kangas) [RHEL-193670] +- hwmon: (ina2xx) make regulator 'vs' support optional (Jared Kangas) [RHEL-193670] +- hwmon: (ina226) Add support for SY24655 (Jared Kangas) [RHEL-193670] +- hwmon: (ina2xx) Add support for INA260 (Jared Kangas) [RHEL-193670] +- hwmon: (ina2xx) Add support for has_alerts configuration flag (Jared Kangas) [RHEL-193670] +- hwmon: (core) Use device name as a fallback in devm_hwmon_device_register_with_info (Jared Kangas) [RHEL-193670] +- hwmon: Support guard() and scoped_guard for subsystem locks (Jared Kangas) [RHEL-193670] +- hwmon: Serialize accesses in hwmon core (Jared Kangas) [RHEL-193670] +- hwmon: Add label support for 64-bit energy attributes (Jared Kangas) [RHEL-193670] +- hwmon: Introduce 64-bit energy attribute support (Jared Kangas) [RHEL-193670] +- redhat/configs: automotive: enable PWM_FSL_FTM as a module (Jared Kangas) [RHEL-210979] +- arm64: dts: s32g: add PWM support for s32g2 and s32g3 (Jared Kangas) [RHEL-210979] +- arm64: dts: s32g: add SAR ADC support for s32g2 and s32g3 (Jared Kangas) [RHEL-210979] +- pwm: Add the S32G support in the Freescale FTM driver (Jared Kangas) [RHEL-210979] +- pwm: fsl-ftm: Drop driver local locking (Jared Kangas) [RHEL-210979] +- pwm: fsl-ftm: Handle clk_get_rate() returning 0 (Jared Kangas) [RHEL-210979] +- selinux: fix incorrect execmem checks on overlayfs (Ondrej Mosnacek) [RHEL-189741] +- Revert "selinux: RHEL-only hotfix for execmem regression" (Ondrej Mosnacek) [RHEL-189741] +- s390/pkey: Check length in pkey_pckmo handler implementation (Ramesh Chhetri) [RHEL-190427] +- s390/pkey: Check length in PKEY_VERIFYPROTK ioctl (Ramesh Chhetri) [RHEL-190428] +- KEYS: trusted: Fix a memory leak in tpm2_load_cmd (CKI Backport Bot) [RHEL-189607] {CVE-2025-71147} +- gpio: pca953x: propagate regulator_enable() error from resume (Jared Kangas) [RHEL-190842] +- gpio: pca953x: drop bitmap_complement() where feasible (Jared Kangas) [RHEL-190842] +- gpio: pca953x: mask interrupts in irq shutdown (Jared Kangas) [RHEL-190842] +- Documentation: gpio: pca953x: clarify interrupt source detection (Jared Kangas) [RHEL-190842] +- gpio: pca953x: handle short interrupt pulses on PCAL devices (Jared Kangas) [RHEL-190842] +- gpio: pca953x: Add support for TCAL6408 TCAL6416 (Jared Kangas) [RHEL-190842] +- dt-bindings: gpio: gpio-pca95xx: Add tcal6408 and tcal6416 (Jared Kangas) [RHEL-190842] +- Documentation: gpio: add TCAL6408 and TCAL6416 (Jared Kangas) [RHEL-190842] +- Documentation: gpio: Add a compatibility and feature list for PCA953x (Jared Kangas) [RHEL-190842] +- gpio: pca953x: clarify log messages about auto increment feature (Jared Kangas) [RHEL-190842] +- gpio: pca953x: enable latch only on edge-triggered inputs (Jared Kangas) [RHEL-190842] +- gpio: Kconfig: Update help for GPIO_PCA953X (Jared Kangas) [RHEL-190842] +- gpio: pca953x: use regmap_update_bits() to improve performance (Jared Kangas) [RHEL-190842] +- gpio: pca953x: Add support for TI TCA6418 (Jared Kangas) [RHEL-190842] +- dt-bindings: gpio: pca95xx: add TI TCA6418 (Jared Kangas) [RHEL-190842] +- gpio: pca953x: fix wrong error probe return value (Jared Kangas) [RHEL-190842] +- gpio: pca953x: fix IRQ storm on system wake up (Jared Kangas) [RHEL-190842] +- gpio: pca953x: Add support for level-triggered interrupts (Jared Kangas) [RHEL-190842] +- dt-bindings: gpio: pca95xx: add Toradex ecgpiol16 (Jared Kangas) [RHEL-190842] +- gpio: pca953x: use value returning setters (Jared Kangas) [RHEL-190842] +- gpio: pca953x: log an error when failing to get the reset GPIO (Jared Kangas) [RHEL-190842] +- gpio: pca953x: Improve interrupt support (Jared Kangas) [RHEL-190842] +- crypto: testmgr - Ignore EEXIST on shash allocation (Thomas Huth) [RHEL-153093] +- crypto: api - Redo lookup on EEXIST (Thomas Huth) [RHEL-153093] +- sched_ext: Convert scx_dump_state() spinlock to raw spinlock (Herton R. Krzesinski) [RHEL-184683] +- net: ipv6: fix NOREF dst use in seg6 and rpl lwtunnels (Antoine Tenart) [RHEL-179292] {CVE-2026-46099} +- dt-bindings: rtc: pcf85063: remove quartz-load-femtofarads restriction for nxp,pcf85063 (CKI Backport Bot) [RHEL-190843] +- rtc: pcf85063: scope pcf85063_config structures (CKI Backport Bot) [RHEL-190843] +- rtc: pcf85063: convert from round_rate() to determine_rate() (CKI Backport Bot) [RHEL-190843] +- rtc: pcf85063: fix incorrect maximum clock rate handling (CKI Backport Bot) [RHEL-190843] +- rtc: pcf85063: add support for RV8063 (CKI Backport Bot) [RHEL-190843] +- rtc: pcf85063: create pcf85063_i2c_probe (CKI Backport Bot) [RHEL-190843] +- dt-bindings: rtc: pcf85063: add binding for RV8063 (CKI Backport Bot) [RHEL-190843] +- rtc: pcf85063: replace dev_err+return with return dev_err_probe (CKI Backport Bot) [RHEL-190843] +- rtc: pcf85063: do a SW reset if POR failed (CKI Backport Bot) [RHEL-190843] +- x86/CPU/AMD: Prevent improper isolation of shared resources in Zen2's op cache (Dennis Chen) [RHEL-188778] {CVE-2025-54518} +- cpufreq: intel_pstate: Use correct scaling factor on Raptor Lake-E (Mark Langsdorf) [RHEL-185959] +- scsi: core: Wake up the error handler when final completions race against each other (CKI Backport Bot) [RHEL-189653] {CVE-2026-23110} +- redhat/kernel.spec: make module and modules-core provides use variant (Jan Stancek) [RHEL-183433] +- iommu: Warn on premature unblock during DMA aliased sibling reset (Eder Zulian) [RHEL-188931] +- iommu: Fix WARN_ON in __iommu_group_set_domain_nofail() due to reset (Eder Zulian) [RHEL-188931] {CVE-2026-52952} +- iommu: Fix ATS invalidation timeouts during __iommu_remove_group_pasid() (Eder Zulian) [RHEL-188931] +- iommu: Fix nested pci_dev_reset_iommu_prepare/done() (Eder Zulian) [RHEL-188931] +- iommu: Fix pasid attach in pci_dev_reset_iommu_prepare/done() (Eder Zulian) [RHEL-188931] +- iommu: Replace per-group resetting_domain with per-gdev blocked flag (Eder Zulian) [RHEL-188931] +- iommu: Fix kdocs of pci_dev_reset_iommu_done() (Eder Zulian) [RHEL-188931] +- iommu: Fix NULL group->domain dereference in pci_dev_reset_iommu_done() (Eder Zulian) [RHEL-188931] +- dm log: fix out-of-bounds write due to region_count overflow (CKI Backport Bot) [RHEL-188552] {CVE-2026-53059} +- crypto: ccp - copy IV using skcipher ivsize (CKI Backport Bot) [RHEL-188465] {CVE-2026-53016} +- crypto: qat - clear AES key schedule from stack (Vladislav Dronov) [RHEL-115836] +- crypto: qat - cancel work on re-enable SR-IOV timeout (Vladislav Dronov) [RHEL-115836] +- crypto: qat - use 2-arg strscpy where destination size is known (Vladislav Dronov) [RHEL-115836] +- PCI/P2PDMA: Add Intel QAT, DSA, IAA devices to whitelist (Vladislav Dronov) [RHEL-115836] +- crypto: qat - validate RSA CRT component lengths (Vladislav Dronov) [RHEL-115836] +- crypto: qat - simplify adf_service_mask_to_string helper (Vladislav Dronov) [RHEL-115836] +- crypto: qat - add KPT support for GEN6 devices (Vladislav Dronov) [RHEL-115836] +- crypto: qat - use pci logging variants for PCI-specific messages (Vladislav Dronov) [RHEL-115836] +- crypto: qat - protect service table iterations with service_lock (Vladislav Dronov) [RHEL-115836] +- crypto: qat - fix restarting state leak on allocation failure (Vladislav Dronov) [RHEL-115836] +- Documentation: qat_rl: make rate limiting wording clearer (Vladislav Dronov) [RHEL-115836] +- crypto: qat - handle sysfs-triggered reset callbacks (Vladislav Dronov) [RHEL-115836] +- crypto: qat - factor out AER reset helpers (Vladislav Dronov) [RHEL-115836] +- crypto: qat - skip restart for down devices (Vladislav Dronov) [RHEL-115836] +- crypto: qat - centralize bus master enable (Vladislav Dronov) [RHEL-115836] +- crypto: qat - notify fatal error before AER reset preparation (Vladislav Dronov) [RHEL-115836] +- crypto: qat - keep VFs enabled during reset (Vladislav Dronov) [RHEL-115836] +- crypto: qat - fix VF2PF work teardown race in adf_disable_sriov() (Vladislav Dronov) [RHEL-115836] +- crypto: qat - remove MODULE_VERSION (Vladislav Dronov) [RHEL-115836] +- crypto: qat - rename adf_ctl_drv.c to adf_module.c (Vladislav Dronov) [RHEL-115836] +- crypto: qat - remove unused character device and IOCTLs (Vladislav Dronov) [RHEL-115836] +- crypto: qat - fix heartbeat error injection (Vladislav Dronov) [RHEL-115836] +- crypto: qat - fix IRQ cleanup on 6xxx probe failure (Vladislav Dronov) [RHEL-115836] {CVE-2026-46060} +- crypto: qat - use swab32 macro (Vladislav Dronov) [RHEL-115836] +- crypto: qat - replace scnprintf() with sysfs_emit() (Vladislav Dronov) [RHEL-115836] +- crypto: qat - fix type mismatch in RAS sysfs show functions (Vladislav Dronov) [RHEL-115836] +- crypto: qat - fix compression instance leak (Vladislav Dronov) [RHEL-115836] +- crypto: qat - use acomp_tfm_ctx() (Vladislav Dronov) [RHEL-115836] +- crypto: qat - disable 420xx AE cluster when lead engine is fused off (Vladislav Dronov) [RHEL-115836] +- crypto: qat - disable 4xxx AE cluster when lead engine is fused off (Vladislav Dronov) [RHEL-115836] +- crypto: qat - add anti-rollback support for GEN6 devices (Vladislav Dronov) [RHEL-115836] +- crypto: qat - add wireless mode support for QAT GEN6 (Vladislav Dronov) [RHEL-115836] +- crypto: qat - fix firmware loading failure for GEN6 devices (Vladislav Dronov) [RHEL-115836] +- crypto: qat - fix indentation of macros in qat_hal.c (Vladislav Dronov) [RHEL-115836] +- crypto: qat - Drop redundant local variables (Vladislav Dronov) [RHEL-115836] +- Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses [partial] (Vladislav Dronov) [RHEL-115836] +- Convert more 'alloc_obj' cases to default GFP_KERNEL arguments [partial] (Vladislav Dronov) [RHEL-115836] +- Convert 'alloc_obj' family to use the new default GFP_KERNEL argument [partial] (Vladislav Dronov) [RHEL-115836] +- treewide: Replace kmalloc with kmalloc_obj for non-scalar types [partial] (Vladislav Dronov) [RHEL-115836] +- zstd: Increase DYNAMIC_BMI2 GCC version cutoff from 4.8 to 11.0 to work around compiler segfault (Vladislav Dronov) [RHEL-115836] +- zstd: Import upstream v1.5.7 (Vladislav Dronov) [RHEL-115836] +- crypto: qat - convert to common field_get() helper (Vladislav Dronov) [RHEL-115836] +- crypto: qat - #undef field_get() before local definition (Vladislav Dronov) [RHEL-115836] +- bitfield: Add non-constant field_{prep,get}() helpers (Vladislav Dronov) [RHEL-115836] +- bitfield: Add less-checking __FIELD_{GET,PREP}() (Vladislav Dronov) [RHEL-115836] +- bitfield: Ensure the return values of helper functions are checked (Vladislav Dronov) [RHEL-115836] +- crypto: qat - Remove dst_null support (Vladislav Dronov) [RHEL-115836] +- qat: don't mess with ->d_name (Vladislav Dronov) [RHEL-115836] +- lib/string_choices: Rearrange functions in sorted order (Vladislav Dronov) [RHEL-115836] +- rxrpc: rxrpc_verify_data ensure rx_dec_buffer alloc (Marc Dionne) [RHEL-178253] +- rxrpc: Fix the ACK parser to extract the SACK table for parsing (Marc Dionne) [RHEL-178253] +- rxrpc: Fix RESPONSE packet verification to extract skb to a linear buffer (Marc Dionne) [RHEL-178253] +- rxrpc: Fix DATA decrypt vs splice() by copying data to buffer in recvmsg (Marc Dionne) [RHEL-178253] +- crypto/krb5, rxrpc: Fix lack of pre-decrypt/pre-verify length checks (Marc Dionne) [RHEL-178253] +- rxrpc: fix oversized RESPONSE authenticator length check (Marc Dionne) [RHEL-178253] {CVE-2026-31635} +- rxrpc: Fix integer overflow in rxgk_verify_response() (Marc Dionne) [RHEL-178253] {CVE-2026-31633} +- rxrpc: Fix leak of rxgk context in rxgk_verify_response() (Marc Dionne) [RHEL-178253] {CVE-2026-31632} +- rxrpc: Fix buffer overread in rxgk_do_verify_authenticator() (Marc Dionne) [RHEL-178253] {CVE-2026-31631} +- rxgk: Fix potential integer overflow in length check (Marc Dionne) [RHEL-178253] {CVE-2026-46039} +- rxrpc: Fix rxkad crypto unalignment handling (Marc Dionne) [RHEL-178253] {CVE-2026-46085} +- rxrpc: Fix memory leaks in rxkad_verify_response() (Marc Dionne) [RHEL-178253] {CVE-2026-46012} +- rxrpc: Fix missing error checks for rxkad encryption/decryption failure (Marc Dionne) [RHEL-178253] +- rxrpc: Also unshare DATA/RESPONSE packets when paged frags are present (Marc Dionne) [RHEL-178253] {CVE-2026-43500} +- rxrpc: Fix conn-level packet handling to unshare RESPONSE packets (Marc Dionne) [RHEL-178253] {CVE-2026-46000} +- rxrpc: only handle RESPONSE during service challenge (Marc Dionne) [RHEL-178253] {CVE-2026-31676} +- Revert "Disable CET when calling tboot shutdown procedure." (Tony Camuso) [RHEL-177961] +- sctp: revalidate list cursor after sctp_sendmsg_to_asoc() in SCTP_SENDALL (CKI Backport Bot) [RHEL-179862] {CVE-2026-46227} +- ipv6: icmp: clear skb2->cb[] in ip6_err_gen_icmpv6_unreach() (Guillaume Nault) [RHEL-172678] {CVE-2026-43038} +- efi: Allow to expose the workqueue via sysfs (Luis Claudio R. Goncalves) [RHEL-175660] +- workqueue: Allow to expose ordered workqueues via sysfs (Luis Claudio R. Goncalves) [RHEL-175660] +- ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data() (CKI Backport Bot) [RHEL-174199] {CVE-2026-43186} +- redhat: disable XEN_PRIVCMD and XENFS (Vitaly Kuznetsov) [RHEL-172496] {CVE-2026-31788 CVE-2026-31787} +- selftests: fib_nexthops: test stale has_v4 on nexthop replace (Guillaume Nault) [RHEL-152711] +- nexthop: fix IPv6 route referencing IPv4 nexthop (Guillaume Nault) [RHEL-152711] +- ipv4: icmp: fix null-ptr-deref in icmp_build_probe() (Guillaume Nault) [RHEL-152711] +- ipv4: nexthop: allocate skb dynamically in rtm_get_nexthop() (Guillaume Nault) [RHEL-152711] +- ipv4: nexthop: avoid duplicate NHA_HW_STATS_ENABLE on nexthop group dump (Guillaume Nault) [RHEL-152711] +- icmp: fix NULL pointer dereference in icmp_tag_validation() (Guillaume Nault) [RHEL-152711] +- net: nexthop: fix percpu use-after-free in remove_nh_grp_entry (Guillaume Nault) [RHEL-152711] +- net: ipv4: fix ARM64 alignment fault in multipath hash seed (Guillaume Nault) [RHEL-152711] +- selftests: net: add ICMP error source address test over xfrm tunnel (Guillaume Nault) [RHEL-152711] +- icmp: fix ICMP error source address when xfrm policy matches (Guillaume Nault) [RHEL-152711] +- icmp: prevent possible overflow in icmp_global_allow() (Guillaume Nault) [RHEL-152711] +- ping: annotate data-races in ping_lookup() (Guillaume Nault) [RHEL-152711] +- xfrm: fix ip_rt_bug race in icmp_route_lookup reverse path (Guillaume Nault) [RHEL-152711] +- inet: RAW sockets using IPPROTO_RAW MUST drop incoming ICMP (Guillaume Nault) [RHEL-152711] +- inet: ping: Fix icmp out counting (Guillaume Nault) [RHEL-152711] +- selftests: fib_nexthops: Add test cases for error routes deletion (Guillaume Nault) [RHEL-152711] +- ipv4: Fix reference count leak when using error routes with nexthop objects (Guillaume Nault) [RHEL-152711] +- inet: frags: flush pending skbs in fqdir_pre_exit() (Guillaume Nault) [RHEL-152711] +- inet: frags: add inet_frag_queue_flush() (Guillaume Nault) [RHEL-152711] +- inet: frags: avoid theoretical race in ip_frag_reinit() (Guillaume Nault) [RHEL-152711] +- net: bonding: fix use-after-free in bond_xmit_broadcast() (CKI Backport Bot) [RHEL-168076] {CVE-2026-31419} +- platform/mellanox: mlxbf-pmc: Remove trailing whitespaces from event names (David Thompson) [RHEL-167064] +- page_pool: store detach_time as ktime_t to avoid false-negatives (Paolo Abeni) [RHEL-152734] +- net: Fix rcu_tasks stall in threaded busypoll (Paolo Abeni) [RHEL-152734] +- net: consume xmit errors of GSO frames (Paolo Abeni) [RHEL-152734] +- net: Drop the lock in skb_may_tx_timestamp() (Paolo Abeni) [RHEL-152734] +- net: remove WARN_ON_ONCE when accessing forward path array (Paolo Abeni) [RHEL-152734] +- net: gro: fix outer network offset (Paolo Abeni) [RHEL-152734] +- net: add proper RCU protection to /proc/net/ptype (Paolo Abeni) [RHEL-152734] +- linkwatch: use __dev_put() in callers to prevent UAF (Paolo Abeni) [RHEL-152734] +- net: fix segmentation of forwarding fraglist GRO (Paolo Abeni) [RHEL-152734] +- dst: fix races in rt6_uncached_list_del() and rt_del_uncached_list() (Paolo Abeni) [RHEL-152734] +- net: update netdev_lock_{type,name} (Paolo Abeni) [RHEL-152734] +- netdev: preserve NETIF_F_ALL_FOR_ALL across TSO updates (Paolo Abeni) [RHEL-152734] +- net: sock: fix hardened usercopy panic in sock_recv_errqueue (Paolo Abeni) [RHEL-152734] +- net: gro: clear skb_shinfo(skb)->hwtstamps in napi_reuse_skb() (Paolo Abeni) [RHEL-152734] +- net: allow alloc_skb_with_frags() to use MAX_SKB_FRAGS (Paolo Abeni) [RHEL-152734] +- net: dst_metadata: fix IP_DF bit not extracted from tunnel headers (Paolo Abeni) [RHEL-152734] +- netlink: support dumping IPv4 multicast addresses (Hangbin Liu) [RHEL-123730] + * Wed Jul 15 2026 CKI KWF Bot [6.12.0-250.el10] - flex_proportions: make fprop_new_period() hardirq safe (CKI Backport Bot) [RHEL-189660] {CVE-2026-23168} - PCI/TPH: Expose pcie_tph_get_st_table_loc() (CKI Backport Bot) [RHEL-186643] diff --git a/kmap.py b/kmap.py new file mode 100755 index 000000000..70af504d1 --- /dev/null +++ b/kmap.py @@ -0,0 +1,874 @@ +#!/usr/bin/env python3 + +""" +kmap.py - Kernel Source-to-Binary Mapping Tool + +DESCRIPTION + This tool parses Linux kernel build artifacts (.cmd files, archives) to + create a JSON mapping of which source files contribute to which kernel + binaries (modules and vmlinux). It supports merging data from multiple + kernel build variants (e.g., stock, debug, rt) into a single output + file using variant indices to track per-variant mappings. + + Supported RHEL versions: 7, 8, 9, upstream + +FEATURES + - Parses .cmd files generated by kbuild to extract compilation commands + - Supports C (gcc/clang) and Rust (rustc) source files + - Handles built-in objects via built-in.o.cmd (RHEL 7), built-in.a + (RHEL 8/9), or vmlinux.a (upstream) + - Merges multiple kernel variants into single output with variant indices + - Maps modules to their containing RPM packages + +OUTPUT FORMAT + The output is a JSON file with the following structure: + + { + "variants": ["stock", "rt", ...], + "source-map": { + "obj-src": {: {: []}}, + "src-obj": {: {: []}} + }, + "module-map": { + "module-rpm": {: {: []}}, + "rpm-modules": {: {: []}} + } + } + +PARSING THE OUTPUT + import json + + with open('kernel-map.json') as f: + data = json.load(f) + + variants = data['variants'] + obj_src = data['source-map']['obj-src'] + src_obj = data['source-map']['src-obj'] + module_rpm = data['module-map']['module-rpm'] + rpm_modules = data['module-map']['rpm-modules'] + + # Get sources for vmlinux in variant "stock" (index 0) + vmlinux_sources = [src for src, indices in obj_src['vmlinux'].items() + if 0 in indices] + + # Find which object a source contributes to + fork_objects = [obj for obj, indices in src_obj['kernel/fork.c'].items() + if 0 in indices] + + # Get RPM for a module + def get_rpm(module, variant_idx): + for rpm, indices in module_rpm.get(module, {}).items(): + if variant_idx in indices: + return rpm + return None + +USAGE + # Single variant + ./kmap.py -d /build/stock -r upstream -v stock -o /output + + # Merge multiple variants + ./kmap.py -d /build/stock -r upstream -v stock -o /output + ./kmap.py -d /build/debug -r upstream -v debug -o /output -i kernel-map.json + ./kmap.py -d /build/rt -r upstream -v rt -o /output -i kernel-map.json + + # With module-to-RPM mapping + ./kmap.py -d /build -r upstream -v stock -o /output \\ + --vmlinux-rpm kernel-core-5.14.0.rpm \\ + --module-list kernel-modules-5.14.0.rpm:modules.list + +CREDITS + Inspired by gen_compile_commands.py and Joe Lawrence. + Time measurement option added for Jan Stancek. +""" + +import re +import os +import pathlib +import json +import argparse +import subprocess +import time + + +# ============================================================================= +# Constants +# ============================================================================= + +VMLINUX = 'vmlinux' +KERNEL_PREFIX = 'kernel/' + +# Supported compilers and linkers +COMPILERS = ('gcc', 'clang') +LINKER = 'ld' +RUST_COMPILER = 'rustc' + + +# ============================================================================= +# Regex Patterns +# +# These patterns parse the kernel build .cmd files to extract: +# - What compiler/linker was used +# - What source files were compiled +# - What object files were linked +# ============================================================================= + +# Pattern for .ko.cmd files (module linking) +# Matches: cmd_path/to/module.ko := ld -o +# Note: upstream kernels use 'savedcmd_' prefix instead of 'cmd_' +_KO_CMD_PATTERN = ( + r'^(saved)?cmd_[^ ]*\.ko\s*:=\s*ld\s+' + r'(?P.*) -o (?P\S+) (?P[^;]+?)\s*(?:;|$)' +) + +# Pattern for .o.cmd files (object compilation) +# Matches multiple formats: +# - C/asm: cmd_*.o := gcc/clang -o +# - Rust: cmd_*.o := rustc --emit=obj= +# - Rust source mapping: source_*.o := +_O_CMD_PATTERN = ( + r'^(saved)?(?:cmd_|source_)[^ ]*\.o\s+:=\s+' + r'(?:' + r'(?P(?:\S+=\S+\s+)*)?' + r'(?Pgcc|clang|ld|rustc)\s+' + r'(?P.*?)' + r'(?:' + r'\s+-o\s+(?P\S+)\s+(?P[^;]+?)' + r'|' + r'\s+--emit=obj=(?P\S+).*?\s+(?P\S+\.rs)' + r')' + r'|' + r'(?P\S+\.rs)' + r')\s*(?:;|$)' +) + +ko_matcher = re.compile(_KO_CMD_PATTERN) +o_matcher = re.compile(_O_CMD_PATTERN) + + +# ============================================================================= +# Utility Functions +# ============================================================================= + +def parse_args(): + """ + Parse command line arguments + """ + parser = argparse.ArgumentParser( + prog='Kernel Build Mapper', + description='Scrape Linux Kernel .cmd files to map contribution ' + 'of individual source files to kernel binaries.', + ) + + parser.add_argument('-d', '--directory', + help='Directory with kernel build artifacts.', + default='', + type=str) + + parser.add_argument('-o', '--outputdir', + help='Directory where to put generated files.', + default='', + type=str) + + parser.add_argument('-p', '--prefix', + help='Name prefix to the generated files.', + default='', + type=str) + + parser.add_argument('-r', '--rhel', + help='Specify to what version of RHEL artifacts belong (upstream for RHEL 10+/kernel-ark)', + choices=['7', '8', '9', 'upstream'], + required=True) + + parser.add_argument('-m', '--no-modules', + help='*SKIP* collecting information about modules', + action='store_true') + + parser.add_argument('-b', '--no-builtin', + help='*SKIP* collecting information about built-in', + action='store_true') + + parser.add_argument('-t', '--time', + help='Print elapsed time at the end', + action='store_true') + + parser.add_argument('-v', '--variant', + help='Name of this kernel variant (e.g., stock, debug, rt)', + required=True, + type=str) + + parser.add_argument('-i', '--input', + help='Existing JSON file to merge with (from previous variant runs)', + default='', + type=str) + + parser.add_argument('--module-list', + help='Module list in format : (can be specified multiple times)', + action='append', + default=[], + metavar='RPM:PATH') + + parser.add_argument('--vmlinux-rpm', + help='RPM package name for vmlinux (e.g., "kernel-5.14.0.rpm")', + default='', + type=str) + + return parser.parse_args() + + +def load_file(filename, build_dir=''): + """ + Load a text file and return non-empty lines as a list + """ + full_path = os.path.join(build_dir, filename) + + try: + with open(full_path, 'rt', encoding='utf-8') as file: + return [line.rstrip() for line in file if line.rstrip()] + except FileNotFoundError: + print(f'File "{full_path}" not found.') + return [] + + +def name_to_cmd(filename, suffix): + """ + Convert object filename to corresponding .cmd script filename + + Example: kernel/fork.o -> kernel/.fork.o.cmd + """ + path, _ = os.path.splitext(filename) + dirname = os.path.dirname(path) + basename = os.path.basename(path) + + return os.path.join(dirname, '.' + basename + suffix) + + +def strip_path_prefixes(path, build_dir): + """ + Normalize path by removing build directory prefix and other artifacts + """ + path = pathlib.Path(path) + + if build_dir: + try: + return str(path.resolve().relative_to(pathlib.Path(build_dir).resolve())) + except ValueError: + pass + + if path.is_absolute(): + path = pathlib.Path(*path.parts[1:]) + + while path.parts and path.parts[0] == 'repos': + path = pathlib.Path(*path.parts[1:]) + + return str(path) + + +def is_external_source(path): + """ + Check if path should be excluded from source mapping + + Filters out: + - Rust toolchain sources (not part of kernel source) + - Generated assembly files (e.g., initramfs_data.S) + """ + if 'rustlib' in path: + return True + if path.endswith('_data.S'): + return True + return False + + +def is_mod_file_reference(ld_input): + """ + Check if linker input is a .mod file reference (RHEL 9+ module linking) + + In RHEL 9+, module linking uses @path/to/module.mod files that contain + the list of object files to link. + """ + files = ld_input.split() + return len(files) == 1 and files[0].startswith('@') and files[0].endswith('.mod') + + +# ============================================================================= +# SourceMap Class +# ============================================================================= + +class SourceMap: + """ + Collects and manages kernel source-to-binary mappings. + + This class parses kernel build artifacts (.cmd files, archives) to determine + which source files contribute to which kernel binaries (modules and vmlinux). + + Data structures: + obj_to_src: {object_name: {source_file: [variant_indices]}} + src_to_obj: {source_file: {object_name: [variant_indices]}} + module_rpm: {module_name: {rpm_name: [variant_indices]}} + rpm_to_modules: {rpm_name: {module_name: [variant_indices]}} + + Variant indices correspond to positions in the 'variants' list. + """ + + # Dispatch table for RHEL-specific builtin collection methods + BUILTIN_COLLECTORS = { + '7': '_collect_builtin_rhel7', + '8': '_collect_builtin_archive', + '9': '_collect_builtin_archive', + 'upstream': '_collect_builtin_vmlinux_archive', + } + + def __init__(self, build_dir='', output_dir='', outprefix='', rhel='7', variant=''): + # Source mappings + self.obj_to_src = {} + self.src_to_obj = {} + # Module-to-RPM mappings + self.module_rpm = {} + self.rpm_to_modules = {} + + # Configuration + self.build_dir = build_dir + self.output_dir = output_dir + self.outprefix = outprefix + self.rhel = rhel + + # Module list + self.modlist = set() + + # Variant tracking for multi-variant merging + self.variants = [] + self.variant = variant + self.variant_idx = 0 + + # ------------------------------------------------------------------------- + # Variant Management + # ------------------------------------------------------------------------- + + def load_existing(self, filename): + """ + Load existing merged data from previous variant runs + """ + if not filename: + return + + full_path = os.path.join(self.output_dir, filename) if self.output_dir else filename + + if not os.path.exists(full_path): + return + + with open(full_path, 'rt', encoding='utf-8') as f: + data = json.load(f) + + self.variants = data.get('variants', []) + + module_map = data.get('module-map', {}) + self.module_rpm = module_map.get('module-rpm', {}) + self.rpm_to_modules = module_map.get('rpm-modules', {}) + + source_map = data.get('source-map', {}) + self.obj_to_src = source_map.get('obj-src', {}) + self.src_to_obj = source_map.get('src-obj', {}) + + def add_variant(self): + """ + Register current variant and store its index + """ + if self.variant in self.variants: + self.variant_idx = self.variants.index(self.variant) + else: + self.variant_idx = len(self.variants) + self.variants.append(self.variant) + + # ------------------------------------------------------------------------- + # Source Merging Helpers + # ------------------------------------------------------------------------- + + def _merge_sources(self, target, source): + """ + Merge source dict into target dict by combining variant index lists + """ + for src, indices in source.items(): + if src not in target: + target[src] = [] + for idx in indices: + if idx not in target[src]: + target[src].append(idx) + + def _add_source(self, sources, source_path): + """ + Add a source file to the sources dict with current variant index + + Returns True if source was added, False if filtered out + """ + source_path = os.path.normpath(source_path) + source_path = strip_path_prefixes(source_path, self.build_dir) + + if is_external_source(source_path): + return False + + sources[source_path] = [self.variant_idx] + return True + + # ------------------------------------------------------------------------- + # .cmd File Parsing + # ------------------------------------------------------------------------- + + def _parse_ko_cmd(self, ko_name): + """ + Parse .ko.cmd file to find the primary object file linked into the module + """ + ko_script = name_to_cmd(ko_name, '.ko.cmd') + lines = load_file(ko_script, build_dir=self.build_dir) + + for line in lines: + result = ko_matcher.match(line) + if result: + input_files = result.group('input_files').split() + return input_files[0] + + return None + + def _parse_o_cmd(self, o_name, translate=True): + """ + Parse .o.cmd file to extract source files that contribute to the object + + Handles: + - C/assembly compilation (gcc, clang) + - Linking (ld) - recursively parses linked objects + - Rust compilation (rustc) + - Rust source file mappings + + Args: + o_name: Object file name or .cmd file path + translate: If True, convert object name to .cmd path (e.g., kernel/fork.o + becomes kernel/.fork.o.cmd). If False, use o_name as-is. + This parameter exists to handle different kbuild behaviors + across RHEL versions - some code paths may already have .cmd + paths while others have object names that need translation. + """ + sources = {} + + o_script = name_to_cmd(o_name, '.o.cmd') if translate else o_name + lines = load_file(o_script, build_dir=self.build_dir) + + for line in lines: + result = o_matcher.match(line) + if not result: + continue + + command = result.group('command') + + if command in COMPILERS: + self._handle_compiler(result, sources) + break + + elif command == LINKER: + self._handle_linker(result, sources) + break + + elif command == RUST_COMPILER: + self._handle_rustc(result, sources) + break + + else: + self._handle_rust_source_mapping(result, sources) + break + + return sources + + def _handle_compiler(self, match_result, sources): + """ + Handle gcc/clang compilation - extract the input source file + """ + obj_input = match_result.group('input_files') + if obj_input: + self._add_source(sources, obj_input) + + def _handle_linker(self, match_result, sources): + """ + Handle ld linking - recursively parse linked objects + """ + obj_input = match_result.group('input_files') + if not obj_input: + return + + if is_mod_file_reference(obj_input): + self._merge_sources(sources, self._parse_mod_cmd(obj_input)) + else: + for obj_file in obj_input.split(): + self._merge_sources(sources, self._parse_o_cmd(obj_file)) + + def _handle_rustc(self, match_result, sources): + """ + Handle rustc compilation - extract the Rust source file + """ + rust_input = match_result.group('rust_input_file') + if rust_input: + self._add_source(sources, rust_input) + + def _handle_rust_source_mapping(self, match_result, sources): + """ + Handle Rust source file mapping (source_*.o := *.rs) + """ + source_file = match_result.group('source_file') + if source_file and source_file.endswith('.rs'): + self._add_source(sources, source_file) + + def _parse_mod_cmd(self, mod_name): + """ + Parse .mod file used by RHEL 9+ for linking modules + + These files contain a list of object files to link into the module. + """ + sources = {} + mod_name = mod_name.strip('@') + lines = load_file(mod_name, build_dir=self.build_dir) + + for line in lines: + self._merge_sources(sources, self._parse_o_cmd(line)) + + return sources + + def _parse_a_cmd(self, a_name): + """ + Parse archive .cmd file (RHEL 7 built-in.o.cmd files) + """ + sources = {} + lines = load_file(a_name, build_dir=self.build_dir) + + for line in lines: + result = o_matcher.match(line) + if not result: + continue + + ar_input = result.group('input_files') + for filename in ar_input.rsplit(): + if filename.endswith('.o'): + self._merge_sources(sources, self._parse_o_cmd(filename)) + elif filename.endswith('.a'): + self._merge_sources(sources, self._parse_a_cmd(filename)) + + return sources + + # ------------------------------------------------------------------------- + # Module Collection + # ------------------------------------------------------------------------- + + def _load_module_list(self, modorder='modules.order'): + """ + Load modules.order file and normalize paths + + RHEL 7, 8: modules.order has 'kernel/' prefix that needs to be stripped + RHEL 9, upstream: modules.order paths are used as-is + """ + lines = load_file(modorder, build_dir=self.build_dir) + + if not lines: + print(f'Warning: modules.order is empty or not found') + self.modlist = set() + return + + if self.rhel in ['9', 'upstream']: + self.modlist = set(lines) + else: + # RHEL 7, 8: strip fake 'kernel/' prefix added by kbuild + self.modlist = { + path[len(KERNEL_PREFIX):] if path.startswith(KERNEL_PREFIX) else path + for path in lines + } + + def _parse_module_objects(self): + """ + Parse all module .cmd files and extract source mappings. + + Note on RHEL version differences: + - RHEL 7/8/9: modules.order contains .ko paths (e.g., fs/exfat/exfat.ko) + - upstream: modules.order contains .o paths (e.g., fs/exfat/exfat.o) + + The normalization below ensures consistent .ko keys in output regardless + of the modules.order format. + """ + for kobj in self.modlist: + # Normalize to .ko - upstream has .o paths in modules.order + if self.rhel == 'upstream' and kobj.endswith('.o'): + module_name = kobj[:-2] + '.ko' + else: + module_name = kobj + + obj_name = self._parse_ko_cmd(module_name) + if obj_name is None: + print(f'Warning: Could not parse .ko.cmd for "{module_name}", skipping.') + continue + + obj_source = self._parse_o_cmd(obj_name) + if module_name not in self.obj_to_src: + self.obj_to_src[module_name] = {} + self._merge_sources(self.obj_to_src[module_name], obj_source) + + def collect_modules(self, no_modules=False, modorder='modules.order'): + """ + Collect source files for kernel modules + """ + if no_modules: + return + + self._load_module_list(modorder) + self._parse_module_objects() + + # ------------------------------------------------------------------------- + # Builtin Collection (RHEL version-specific) + # ------------------------------------------------------------------------- + + def _collect_builtin_rhel7(self): + """ + Collect built-in objects for RHEL 7 using *built-in.o.cmd files + """ + pattern = '*built-in.o.cmd' + cmd_list = { + strip_path_prefixes(path, self.build_dir) + for path in pathlib.Path(self.build_dir).rglob(pattern) + } + + for entry in cmd_list: + sources = self._parse_a_cmd(entry) + self._merge_sources(self.obj_to_src[VMLINUX], sources) + + def _collect_builtin_archive(self): + """ + Collect built-in objects for RHEL 8/9 using *built-in.a archives + """ + pattern = '*built-in.a' + archive_list = { + strip_path_prefixes(path, self.build_dir) + for path in pathlib.Path(self.build_dir).rglob(pattern) + } + + for entry in archive_list: + path = os.path.join(self.build_dir, entry) + objects = subprocess.check_output(['ar', 't', path]).decode().split() + + for obj in objects: + obj_path = strip_path_prefixes(obj, build_dir=self.build_dir) + sources = self._parse_o_cmd(obj_path) + self._merge_sources(self.obj_to_src[VMLINUX], sources) + + def _collect_builtin_vmlinux_archive(self): + """ + Collect built-in objects for upstream kernels using single vmlinux.a archive + """ + path = os.path.join(self.build_dir, 'vmlinux.a') + objects = subprocess.check_output(['ar', 't', path]).decode().split() + + for obj in objects: + obj_path = strip_path_prefixes(obj, build_dir=self.build_dir) + sources = self._parse_o_cmd(obj_path) + self._merge_sources(self.obj_to_src[VMLINUX], sources) + + def collect_builtin(self, no_builtin=False): + """ + Collect source files for vmlinux built-in objects + + Uses RHEL version-specific collection method via dispatch table. + """ + if VMLINUX not in self.obj_to_src: + self.obj_to_src[VMLINUX] = {} + + if no_builtin: + return + + collector_name = self.BUILTIN_COLLECTORS.get(self.rhel, '_collect_builtin_archive') + collector = getattr(self, collector_name) + collector() + + # ------------------------------------------------------------------------- + # Module-to-RPM Mapping + # ------------------------------------------------------------------------- + + def _parse_module_list_file(self, filename, rpm_name): + """ + Parse a module list file and add entries to module_rpm mapping + + Handles various formats: + - Absolute paths: /lib/modules/5.14.0/kernel/drivers/net/e1000.ko.xz + - Relative paths: kernel/drivers/net/e1000.ko + - Skips RPM spec directives (%dir, %defattr, etc.) + + Args: + filename: Path to the module list file + rpm_name: Literal RPM package name (e.g., "kernel-modules-5.14.0.rpm") + """ + if not filename or not os.path.exists(filename): + return + + with open(filename, 'rt', encoding='utf-8') as f: + for line in f: + line = line.strip() + + # Skip empty lines, comments, and RPM spec directives + if not line or line.startswith('#') or line.startswith('%'): + continue + + # Skip non-module files + if '.ko' not in line: + continue + + # Extract module name from path + module = os.path.basename(line) + # Remove .ko and any compression suffix + module = re.sub(r'\.ko(\.[^.]+)?$', '', module) + + if not module: + continue + + if module not in self.module_rpm: + self.module_rpm[module] = {} + + if rpm_name not in self.module_rpm[module]: + self.module_rpm[module][rpm_name] = [] + if self.variant_idx not in self.module_rpm[module][rpm_name]: + self.module_rpm[module][rpm_name].append(self.variant_idx) + + def collect_module_rpm(self, module_lists, vmlinux_rpm=''): + """ + Collect module-to-RPM name mappings from module list files + + Args: + module_lists: List of "rpm_name:path" strings + vmlinux_rpm: RPM package name for vmlinux + """ + if not module_lists and not vmlinux_rpm: + return + + # Add vmlinux to specified RPM + if vmlinux_rpm: + if VMLINUX not in self.module_rpm: + self.module_rpm[VMLINUX] = {} + if vmlinux_rpm not in self.module_rpm[VMLINUX]: + self.module_rpm[VMLINUX][vmlinux_rpm] = [] + if self.variant_idx not in self.module_rpm[VMLINUX][vmlinux_rpm]: + self.module_rpm[VMLINUX][vmlinux_rpm].append(self.variant_idx) + + # Process module list files + for entry in module_lists: + if ':' not in entry: + print(f'Warning: Invalid --module-list format "{entry}", expected RPM:PATH') + continue + + rpm_name, path = entry.split(':', 1) + self._parse_module_list_file(path, rpm_name) + + # ------------------------------------------------------------------------- + # Output + # ------------------------------------------------------------------------- + + def _build_reverse_map(self): + """ + Create reverse mapping (source -> {obj: [indices]}) from obj_to_src + """ + for obj, sources in self.obj_to_src.items(): + for source, indices in sources.items(): + if source not in self.src_to_obj: + self.src_to_obj[source] = {} + if obj not in self.src_to_obj[source]: + self.src_to_obj[source][obj] = [] + for idx in indices: + if idx not in self.src_to_obj[source][obj]: + self.src_to_obj[source][obj].append(idx) + + def _build_rpm_reverse_map(self): + """ + Create reverse mapping (rpm -> {module: [indices]}) from module_rpm + """ + for module, rpms in self.module_rpm.items(): + for rpm, indices in rpms.items(): + if rpm not in self.rpm_to_modules: + self.rpm_to_modules[rpm] = {} + if module not in self.rpm_to_modules[rpm]: + self.rpm_to_modules[rpm][module] = [] + for idx in indices: + if idx not in self.rpm_to_modules[rpm][module]: + self.rpm_to_modules[rpm][module].append(idx) + + def save_data(self): + """ + Save collected data to JSON file + + Output structure: + - variants: list of variant names + - source-map: source file mappings + - obj-src: object/module -> {source: [variant_indices]} + - src-obj: source -> {object/module: [variant_indices]} + - module-map: module to RPM mappings + - module-rpm: module name -> {rpm-name: [variant_indices]} + - rpm-modules: rpm-name -> {module name: [variant_indices]} + + Variant indices correspond to positions in the 'variants' list. + """ + output = { + 'variants': self.variants, + 'source-map': { + 'obj-src': self.obj_to_src, + 'src-obj': self.src_to_obj + }, + 'module-map': { + 'module-rpm': self.module_rpm, + 'rpm-modules': self.rpm_to_modules + } + } + + filename = self.outprefix + 'kernel-map.json' + with open(os.path.join(self.output_dir, filename), 'wt', encoding='utf-8') as f: + json.dump(output, f, indent=2, sort_keys=True) + + # ------------------------------------------------------------------------- + # Main Entry Point + # ------------------------------------------------------------------------- + + def collect_data(self, no_modules=False, no_builtin=False, modorder='modules.order', + input_file='', module_lists=None, vmlinux_rpm=''): + """ + Main entry point - collect all data and save to JSON + """ + self.load_existing(input_file) + self.add_variant() + self.collect_modules(no_modules, modorder) + self.collect_builtin(no_builtin) + self.collect_module_rpm(module_lists or [], vmlinux_rpm) + self._build_reverse_map() + self._build_rpm_reverse_map() + self.save_data() + + +# ============================================================================= +# Main +# ============================================================================= + +def main(): + """ + Main entry point + """ + args = parse_args() + + start = time.monotonic() + + source_map = SourceMap( + build_dir=args.directory, + output_dir=args.outputdir, + outprefix=args.prefix, + rhel=args.rhel, + variant=args.variant) + + source_map.collect_data( + no_modules=args.no_modules, + no_builtin=args.no_builtin, + input_file=args.input, + module_lists=args.module_list, + vmlinux_rpm=args.vmlinux_rpm) + + if args.time: + elapsed = time.monotonic() - start + minutes, seconds = divmod(int(elapsed), 60) + print(f'Elapsed time: {minutes:02d}:{seconds:02d}') + + +if __name__ == '__main__': + main() diff --git a/sources b/sources index 238a47ac7..cd17c3f5d 100644 --- a/sources +++ b/sources @@ -1,3 +1,3 @@ -SHA512 (linux-6.12.0-250.17.el10nv.tar.xz) = 70daa12497f3b92e762cef548516959261b38bd878d18bb295c0d5e0b2c3968f712e6a9995d1d0c9f10ce0a59b984f61d23e7b2bc23bc92d8d2e70a88f1d59d6 -SHA512 (kernel-abi-stablelists-6.12.0-250.17.el10nv.tar.xz) = b713cb17a9097b3443c4196f465a17f124b7534e9839052b4de7d1e30dda64c5769dd5877cc8e1460577f7e7be1a4bcb351db4d4fa72b09088ee8a0c6eda7b68 -SHA512 (kernel-kabi-dw-6.12.0-250.17.el10nv.tar.xz) = 0559b9128fb318cad585a4d7b9802eab9cb503b04022060ac93becfd86ad5a31f40619006ea4faeb3a213627c36ff0f1a379058cfd42541040e60f5271c71dc9 +SHA512 (linux-6.12.0-253.18.el10nv.tar.xz) = 927bd0b031a01d6e98d7f31964a6d88f5196f2cd0993114d4574f278bbb67b4def5320de015c72d1566e0e181e449da567adad745a222d69a1fce8ea717bffa1 +SHA512 (kernel-abi-stablelists-6.12.0-253.18.el10nv.tar.xz) = 99c2aa834af2272c19b1e10992df06f32b13bfc0f73d4b663ae84847be59d93d8136829db2b6b744f5a7762ed4e5930a96664783b2a864a0d771ba783865a3dd +SHA512 (kernel-kabi-dw-6.12.0-253.18.el10nv.tar.xz) = 0559b9128fb318cad585a4d7b9802eab9cb503b04022060ac93becfd86ad5a31f40619006ea4faeb3a213627c36ff0f1a379058cfd42541040e60f5271c71dc9