diff --git a/Makefile.rhelver b/Makefile.rhelver index c9119be87..8bb8c9482 100644 --- a/Makefile.rhelver +++ b/Makefile.rhelver @@ -12,7 +12,7 @@ RHEL_MINOR = 1 # # Use this spot to avoid future merge conflicts. # Do not trim this comment. -RHEL_RELEASE = 97 +RHEL_RELEASE = 98 # # ZSTREAM diff --git a/kernel.spec b/kernel.spec index 6647ff643..f893143a9 100755 --- a/kernel.spec +++ b/kernel.spec @@ -121,13 +121,13 @@ Summary: The Linux kernel %define kversion 5.14 %define rpmversion 5.14.0 -%define pkgrelease 97.el9 +%define pkgrelease 98.el9 # This is needed to do merge window version magic %define patchlevel 14 # allow pkg_release to have configurable %%{?dist} tag -%define specrelease 97%{?buildid}%{?dist} +%define specrelease 98%{?buildid}%{?dist} %define pkg_release %{specrelease} @@ -676,7 +676,7 @@ BuildRequires: lld # exact git commit you can run # # xzcat -qq ${TARBALL} | git get-tar-commit-id -Source0: linux-5.14.0-97.el9.tar.xz +Source0: linux-5.14.0-98.el9.tar.xz Source1: Makefile.rhelver @@ -1346,8 +1346,8 @@ ApplyOptionalPatch() fi } -%setup -q -n kernel-5.14.0-97.el9 -c -mv linux-5.14.0-97.el9 linux-%{KVERREL} +%setup -q -n kernel-5.14.0-98.el9 -c +mv linux-5.14.0-98.el9 linux-%{KVERREL} cd linux-%{KVERREL} cp -a %{SOURCE1} . @@ -2979,6 +2979,125 @@ fi # # %changelog +* Tue May 24 2022 Patrick Talbert [5.14.0-98.el9] +- hv_balloon: rate-limit "Unhandled message" warning (Vitaly Kuznetsov) [2088401] +- scsi: qla2xxx: Fix typos in comments (Nilesh Javali) [2046623] +- scsi: qla2xxx: Update version to 10.02.07.400-k (Nilesh Javali) [2046623] +- scsi: qla2xxx: Increase max limit of ql2xnvme_queues (Nilesh Javali) [2046623] +- scsi: qla2xxx: Use correct feature type field during RFF_ID processing (Nilesh Javali) [2046623] +- scsi: qla2xxx: Fix stuck session of PRLI reject (Nilesh Javali) [2046623] +- scsi: qla2xxx: Reduce false trigger to login (Nilesh Javali) [2046623] +- scsi: qla2xxx: Fix laggy FC remote port session recovery (Nilesh Javali) [2046623] +- scsi: qla2xxx: Fix hang due to session stuck (Nilesh Javali) [2046623] +- scsi: qla2xxx: Fix N2N inconsistent PLOGI (Nilesh Javali) [2046623] +- scsi: qla2xxx: Fix crash during module load unload test (Nilesh Javali) [2046623] +- scsi: qla2xxx: Fix missed DMA unmap for NVMe ls requests (Nilesh Javali) [2046623] +- scsi: qla2xxx: Fix loss of NVMe namespaces after driver reload test (Nilesh Javali) [2046623] +- scsi: qla2xxx: Fix incorrect reporting of task management failure (Nilesh Javali) [2046623] +- scsi: qla2xxx: Use named initializers for q_dev_state (Nilesh Javali) [2046623] +- scsi: qla2xxx: Use named initializers for port_[d]state_str (Nilesh Javali) [2046623] +- scsi: qla2xxx: Stop using the SCSI pointer (Nilesh Javali) [2046623] +- scsi: qla2xxx: Remove unused qla_sess_op_cmd_list from scsi_qla_host_t (Nilesh Javali) [2046623] +- scsi: qla2xxx: Add qla2x00_async_done() for async routines (Nilesh Javali) [2046623] +- scsi: qla2xxx: Update version to 10.02.07.300-k (Nilesh Javali) [2046623] +- scsi: qla2xxx: Check for firmware dump already collected (Nilesh Javali) [2046623] +- scsi: qla2xxx: Add devids and conditionals for 28xx (Nilesh Javali) [2046623] +- scsi: qla2xxx: Suppress a kernel complaint in qla_create_qpair() (Nilesh Javali) [2046623] +- scsi: qla2xxx: Fix T10 PI tag escape and IP guard options for 28XX adapters (Nilesh Javali) [2046623] +- scsi: qla2xxx: edif: Fix clang warning (Nilesh Javali) [2046623] +- scsi: qla2xxx: Fix warning for missing error code (Nilesh Javali) [2046623] +- scsi: qla2xxx: Fix device reconnect in loop topology (Nilesh Javali) [2046623] +- scsi: qla2xxx: Add ql2xnvme_queues module param to configure number of NVMe queues (Nilesh Javali) [2046623] +- scsi: qla2xxx: Fix wrong FDMI data for 64G adapter (Nilesh Javali) [2046623] +- scsi: qla2xxx: Add retry for exec firmware (Nilesh Javali) [2046623] +- scsi: qla2xxx: Fix scheduling while atomic (Nilesh Javali) [2046623] +- scsi: qla2xxx: Fix premature hw access after PCI error (Nilesh Javali) [2046623] +- scsi: qla2xxx: Fix warning message due to adisc being flushed (Nilesh Javali) [2046623] +- scsi: qla2xxx: Fix stuck session in gpdb (Nilesh Javali) [2046623] +- scsi: qla2xxx: Implement ref count for SRB (Nilesh Javali) [2046623] +- scsi: qla2xxx: Refactor asynchronous command initialization (Nilesh Javali) [2046623] +- scsi: qla2xxx: Synchronize rport dev_loss_tmo setting (Nilesh Javali) [2046623] +- scsi: qla2xxx: Format log strings only if needed (Nilesh Javali) [2046623] +- scsi: qla2xxx: edif: Fix off by one bug in qla_edif_app_getfcinfo() (Nilesh Javali) [2046623] +- scsi: qla2xxx: Fix mailbox direction flags in qla2xxx_get_adapter_id() (Nilesh Javali) [2046623] +- scsi: qla2xxx: Update version to 10.02.07.200-k (Nilesh Javali) [2046623] +- scsi: qla2xxx: edif: Fix EDIF bsg (Nilesh Javali) [2046623] +- scsi: qla2xxx: edif: Fix inconsistent check of db_flags (Nilesh Javali) [2046623] +- scsi: qla2xxx: edif: Increase ELS payload (Nilesh Javali) [2046623] +- scsi: qla2xxx: edif: Reduce connection thrash (Nilesh Javali) [2046623] +- scsi: qla2xxx: edif: Tweak trace message (Nilesh Javali) [2046623] +- scsi: qla2xxx: edif: Replace list_for_each_safe with list_for_each_entry_safe (Nilesh Javali) [2046623] +- scsi: qla2xxx: edif: Flush stale events and msgs on session down (Nilesh Javali) [2046623] +- scsi: qla2xxx: edif: Fix app start delay (Nilesh Javali) [2046623] +- scsi: qla2xxx: edif: Fix app start fail (Nilesh Javali) [2046623] +- scsi: qla2xxx: Turn off target reset during issue_lip (Nilesh Javali) [2046623] +- scsi: qla2xxx: Fix gnl list corruption (Nilesh Javali) [2046623] +- scsi: qla2xxx: Relogin during fabric disturbance (Nilesh Javali) [2046623] +- qla2xxx: add ->map_queues support for nvme (Nilesh Javali) [2046623] +- scsi: qla2xxx: Fix unmap of already freed sgl (Nilesh Javali) [2046623] +- scsi: qla2xxx: Fix a memory leak in an error path of qla2x00_process_els() (Nilesh Javali) [2046623] +- scsi: qla2xxx: Return -ENOMEM if kzalloc() fails (Nilesh Javali) [2046623] +- scsi: qla2xxx: Remove a declaration (Nilesh Javali) [2046623] +- scsi: target: qla2xxx: Replace enable attr with ops.enable (Nilesh Javali) [2046623] +- scsi: qla2xxx: Fix excessive messages during device logout (Nilesh Javali) [2046623] +- scsi: qla2xxx: Restore initiator in dual mode (Nilesh Javali) [2046623] +- scsi: qla2xxx: Remove redundant initialization of pointer req (Nilesh Javali) [2046623] +- scsi: qla2xxx: Update version to 10.02.07.100-k (Nilesh Javali) [2046623] +- scsi: qla2xxx: Fix use after free in eh_abort path (Nilesh Javali) [2046623] +- scsi: qla2xxx: Move heartbeat handling from DPC thread to workqueue (Nilesh Javali) [2046623] +- scsi: qla2xxx: Call process_response_queue() in Tx path (Nilesh Javali) [2046623] +- scsi: qla2xxx: Fix kernel crash when accessing port_speed sysfs file (Nilesh Javali) [2046623] +- scsi: qla2xxx: edif: Use link event to wake up app (Nilesh Javali) [2046623] +- scsi: qla2xxx: Fix crash in NVMe abort path (Nilesh Javali) [2046623] +- scsi: qla2xxx: Check for firmware capability before creating QPair (Nilesh Javali) [2046623] +- scsi: qla2xxx: Display 16G only as supported speeds for 3830c card (Nilesh Javali) [2046623] +- scsi: qla2xxx: Add support for mailbox passthru (Nilesh Javali) [2046623] +- scsi: qla2xxx: Open-code qla2xxx_eh_device_reset() (Nilesh Javali) [2046623] +- scsi: qla2xxx: Open-code qla2xxx_eh_target_reset() (Nilesh Javali) [2046623] +- scsi: qla2xxx: Do not call fc_block_scsi_eh() during bus reset (Nilesh Javali) [2046623] +- scsi: qla2xxx: Update version to 10.02.06.200-k (Nilesh Javali) [2046623] +- scsi: qla2xxx: edif: Fix returnvar.cocci warnings (Nilesh Javali) [2046623] +- scsi: qla2xxx: Fix NVMe session down detection (Nilesh Javali) [2046623] +- scsi: qla2xxx: Fix NVMe retry (Nilesh Javali) [2046623] +- scsi: qla2xxx: Fix hang on NVMe command timeouts (Nilesh Javali) [2046623] +- scsi: qla2xxx: Fix NVMe | FCP personality change (Nilesh Javali) [2046623] +- scsi: qla2xxx: edif: Do secure PLOGI when auth app is present (Nilesh Javali) [2046623] +- scsi: qla2xxx: edif: Add N2N support for EDIF (Nilesh Javali) [2046623] +- scsi: qla2xxx: Fix hang during NVMe session tear down (Nilesh Javali) [2046623] +- scsi: qla2xxx: edif: Fix EDIF enable flag (Nilesh Javali) [2046623] +- scsi: qla2xxx: edif: Reject AUTH ELS on session down (Nilesh Javali) [2046623] +- scsi: qla2xxx: edif: Fix stale session (Nilesh Javali) [2046623] +- scsi: qla2xxx: Update version to 10.02.06.100-k (Nilesh Javali) [2046623] +- scsi: qla2xxx: Sync queue idx with queue_pair_map idx (Nilesh Javali) [2046623] +- scsi: qla2xxx: Changes to support kdump kernel for NVMe BFS (Nilesh Javali) [2046623] +- scsi: qla2xxx: Changes to support kdump kernel (Nilesh Javali) [2046623] +- scsi: qla2xxx: Suppress unnecessary log messages during login (Nilesh Javali) [2046623] +- scsi: qla2xxx: Fix NPIV create erroneous error (Nilesh Javali) [2046623] +- scsi: qla2xxx: Fix unsafe removal from linked list (Nilesh Javali) [2046623] +- scsi: qla2xxx: Fix port type info (Nilesh Javali) [2046623] +- scsi: qla2xxx: Add debug print of 64G link speed (Nilesh Javali) [2046623] +- scsi: qla2xxx: Show OS name and version in FDMI-1 (Nilesh Javali) [2046623] +- scsi: qla2xxx: Changes to support FCP2 Target (Nilesh Javali) [2046623] +- scsi: qla2xxx: Adjust request/response queue size for 28xx (Nilesh Javali) [2046623] +- scsi: qla2xxx: Add host attribute to trigger MPI hang (Nilesh Javali) [2046623] +- scsi: qla2xxx: Remove redundant initialization of variable num_cnt (Nilesh Javali) [2046623] +- scsi: qla2xxx: Fix use after free in debug code (Nilesh Javali) [2046623] +- scsi: qla2xxx: Fix spelling mistakes "allloc" -> "alloc" (Nilesh Javali) [2046623] +- scsi: qla2xxx: Update version to 10.02.00.107-k (Nilesh Javali) [2046623] +- scsi: qla2xxx: edif: Increment command and completion counts (Nilesh Javali) [2046623] +- scsi: qla2xxx: edif: Add encryption to I/O path (Nilesh Javali) [2046623] +- scsi: qla2xxx: edif: Add doorbell notification for app (Nilesh Javali) [2046623] +- scsi: qla2xxx: edif: Add detection of secure device (Nilesh Javali) [2046623] +- scsi: qla2xxx: edif: Add authentication pass + fail bsgs (Nilesh Javali) [2046623] +- scsi: qla2xxx: edif: Add key update (Nilesh Javali) [2046623] +- scsi: qla2xxx: edif: Add extraction of auth_els from the wire (Nilesh Javali) [2046623] +- scsi: qla2xxx: edif: Add send, receive, and accept for auth_els (Nilesh Javali) [2046623] +- scsi: qla2xxx: edif: Add getfcinfo and statistic bsgs (Nilesh Javali) [2046623] +- scsi: qla2xxx: edif: Add start + stop bsgs (Nilesh Javali) [2046623] +- scsi: qla2xxx: Remove unused variable 'status' (Nilesh Javali) [2046623] +- scsi: qla2xxx: Remove redundant continue statement in a for-loop (Nilesh Javali) [2046623] +- KVM: s390: pv: make use of ultravisor AIV support (Thomas Huth) [2044300] + * Mon May 23 2022 Patrick Talbert [5.14.0-97.el9] - tcp: drop the hash_32() part from the index calculation (Guillaume Nault) [2064868] {CVE-2022-1012} - tcp: increase source port perturb table to 2^16 (Guillaume Nault) [2064868] {CVE-2022-1012} diff --git a/sources b/sources index 1cb6a6aa1..ea482cf7f 100644 --- a/sources +++ b/sources @@ -1,3 +1,3 @@ -SHA512 (linux-5.14.0-97.el9.tar.xz) = b01be7b13a36abbdb725712dcaa46ce2a52dc6ff5b2997b6f610f9df6c02b723a95520b2f3b1664f97de470302bed71c5a8db1e49a706053c61519280446054f -SHA512 (kernel-abi-stablelists-5.14.0-97.el9.tar.bz2) = 33babb13abd06cac854969b2014fbd6599e15338ce18681543c5c6883a225bf5b693012192855867053648b221e05bf32969c9ceec2e335d367bdb968bb36b7b -SHA512 (kernel-kabi-dw-5.14.0-97.el9.tar.bz2) = b07e3d6617cc434bf03eb165691b8b64418260e0a97bf3da3959aa03d142ff345c94b4a0f0856246d2b2c6a6a713fd6495e9f2cb73244cf4cfc5a4b7525e7674 +SHA512 (linux-5.14.0-98.el9.tar.xz) = bb52f5a8c10f53a3e2f55cb59b41e6c7f958fb3ecba314617e9defd6e1eea3b548ae9506fa7033656363dcecc56490c6f898cb2882450f093febe6f96a720fa6 +SHA512 (kernel-abi-stablelists-5.14.0-98.el9.tar.bz2) = e69c3bb7b85d706199297834f1e92d775329fa37421f861745a73137ddd1b8a2e54a60a40d45e9e700ae549ccb77ba6261078bbda34d1f08c080f71dfc453de6 +SHA512 (kernel-kabi-dw-5.14.0-98.el9.tar.bz2) = b07e3d6617cc434bf03eb165691b8b64418260e0a97bf3da3959aa03d142ff345c94b4a0f0856246d2b2c6a6a713fd6495e9f2cb73244cf4cfc5a4b7525e7674