From 4a11352a42b6f7704a1499fd22989ccb3f43d448 Mon Sep 17 00:00:00 2001
From: Lucas Zampieri <lzampier@redhat.com>
Date: Thu, 18 Jul 2024 12:49:03 +0000
Subject: [PATCH] kernel-5.14.0-484.el9

* Thu Jul 18 2024 Lucas Zampieri <lzampier@redhat.com> [5.14.0-484.el9]
- bonding: Fix out-of-bounds read in bond_option_arp_ip_targets_set() (CKI Backport Bot) [RHEL-46919] {CVE-2024-39487}
- phy: ti: gmii-sel: Enable SGMII mode for J784S4 (Andrew Halaney) [RHEL-44742]
- phy: ti: gmii-sel: Fix register offset when parent is not a syscon node (Andrew Halaney) [RHEL-44742]
- phy: ti: gmii-sel: Allow parent to not be syscon node (Andrew Halaney) [RHEL-44742]
- phy: ti: gmii-sel: Enable USXGMII mode for J784S4 (Andrew Halaney) [RHEL-44742]
- phy: ti: gmii-sel: Add support for CPSW9G GMII SEL in J784S4 (Andrew Halaney) [RHEL-44742]
- phy: ti: gmii-sel: Enable SGMII mode for J721E (Andrew Halaney) [RHEL-44742]
- phy: ti: gmii-sel: Enable SGMII mode for J7200 (Andrew Halaney) [RHEL-44742]
- phy: ti: gmii-sel: Add support for SGMII mode (Andrew Halaney) [RHEL-44742]
- phy: ti: gmii-sel: Add support for CPSW9G GMII SEL in J721e (Andrew Halaney) [RHEL-44742]
- phy: ti: gmii-sel: Update methods for fetching and using qsgmii main port (Andrew Halaney) [RHEL-44742]
- phy: ti: gmii-sel: Add support for CPSW5G GMII SEL in J7200 (Andrew Halaney) [RHEL-44742]
- phy: ti: gmii-sel: check of_get_address() for failure (Andrew Halaney) [RHEL-44742]
- clk: keystone: syscon-clk: Fix audio refclk (Andrew Halaney) [RHEL-44742]
- clk: keystone: syscon-clk: Add support for audio refclk (Andrew Halaney) [RHEL-44742]
- clk: keystone: syscon-clk: Allow the clock node to not be of type syscon (Andrew Halaney) [RHEL-44742]
- clk: keystone: syscon-clk: Use dev_err_probe() helper (Andrew Halaney) [RHEL-44742]
- clk: keystone: syscon-clk: Add support for AM62 epwm-tbclk (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j784s4-evm: Consolidate serdes0 references (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j784s4-evm: Assign only lanes 0 and 1 to PCIe1 (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j784s4-main: Add node for EHRPWMs (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am69-sk: Add PCIe support (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j784s4-evm: Add overlay for PCIe0 and PCIe1 EP Mode (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j784s4-evm: Enable PCIe0 and PCIe1 in RC Mode (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j784s4-main: Add PCIe nodes (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j784s4-evm: Add TPS62873 node (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am69-sk: Add TPS62873 node (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j784s4-evm: Enable USB3 support (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j784s4-main: Add support for USB (Andrew Halaney) [RHEL-44742]
- arm64: boot: dts: ti: k3-*: Add memory node to bootloader stage (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j784s4: Add overlay for dual port USXGMII mode (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j784s4-evm: Add support for multiple CAN instances (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j784s4: Add overlay to enable QSGMII mode with CPSW9G (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j784s4-evm: Enable Main CPSW2G node and add aliases for it (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j784s4-main: Add CPSW2G and CPSW9G nodes (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j784s4-evm: Add alias for MCU CPSW2G (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: Fix csi2-dual-imx219 dtb names (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am625-beagleplay: Fix Ethernet PHY RESET GPIOs (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Add USB-C (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j721s2: Add main esm address range (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j721s2-main: Enable support for SDR104 speed mode (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am62a: Enable UHS mode support for SD cards (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am65-main: Remove unused properties in sdhci nodes (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am65-main: Fix sdhci node properties (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j722s-evm: Enable UHS support for MMCSD (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: Enable overlays for the am625-phyboard-lyra (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: am64-phyboard-electra: Add overlay to enable a GPIO fan (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am62a-main: Add Wave5 Video Encoder/Decoder Node (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am69-sk: Fix UART pin type and macro type (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am62-verdin-dahlia: support sleep-moci (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am62-verdin: replace sleep-moci hog with regulator (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am62a: Disable USB LPM (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am62p: add the USB sub-system (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am62/a: use sub-node for USB_PHY_CTRL registers (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am62*: Add PHY2 region to USB wrapper node (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: iot2050: Add icssg-prueth nodes for PG1 devices (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Add Audio Codec (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j721e: Use exact ranges for FSS node (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j7200: Use exact ranges for FSS node (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am65: Use exact ranges for FSS node (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am65: Move SerDes mux nodes under the control node (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am65: Add full compatible to SerDes control nodes (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j722s-evm: Enable eMMC support (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-{am62p,j722s}: Disable ethernet by default (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am642-phyboard-electra-rdk: Increase CAN max bitrate (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Increase CAN max bitrate (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am625-verdin: add PCIe reset gpio hog (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: verdin-am62: mallow: fix GPIOs pinctrl (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j721s2: Remove UART baud rate selection (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j721e: Remove UART baud rate selection (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j7200: Remove UART baud rate selection (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am64: Remove UART baud rate selection (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am65: Remove UART baud rate selection (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am62-lp-sk: Remove tps65219 power-button (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am625-beagleplay: Use mmc-pwrseq for wl18xx enable (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: verdin-am62: use SD1 CD as GPIO (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: verdin-am62: Set memory size to 2gb (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: verdin-am62: dahlia: fix audio clock (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am62p5-sk: minor whitespace cleanup (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: hummingboard-t: add overlays for m.2 pci-e and usb-3 (Andrew Halaney) [RHEL-44742]
- arm64: dts: add description for solidrun am642 som and evaluation board (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am62p: Add Wave5 Video Encoder/Decoder Node (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j721s2-main: Add Wave5 Video Encoder/Decoder Node (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am69-sk: Add support for OSPI flash (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am69-sk: Enable CAN interfaces for AM69 SK board (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: Enable overlays for SK-AM62P (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am62p: Add nodes for CSI-RX (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am62p: Add DMASS1 for CSI (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j722s-evm: Enable OSPI NOR support (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j722s-evm: Enable CPSW3G RGMII1 (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j721e: Fix mux-reg-masks in hbmc_mux (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: Add common1 register space for AM62A SoC (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: Add common1 register space for AM65x SoC (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am642-evm: add overlay for ICSSG1 2nd port (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am642-evm: add ICSSG1 Ethernet support (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am64-main: Add ICSSG IEP nodes (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am6*: Add bootph-all property in MMC node (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am6*: Fix bus-width property in MMC nodes (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am6*: Fix ti,clkbuf-sel property in MMC nodes (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am6*: Remove DLL properties for soft PHYs (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am62p: Add ITAP/OTAP values for MMC (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am64-main: Fix ITAP/OTAP values for MMC (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am62a7-sk: Enable eMMC support (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am62a-main: Add sdhci2 instance (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am62a-main: Add sdhci0 instance (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j721e-sk: Add overlay for IMX219 (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j721s2-main: Add CSI2RX capture nodes (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j721e-main: Add CSI2RX capture nodes (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j721e-sk: Model CSI2RX connector mux (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am69-sk: Enable camera peripherals (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am68-sk-base-board: Enable camera peripherals (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j721s2-common-proc-board: Enable camera peripherals (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: Add reserved memory for watchdog (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: Add support for TI J722S Evaluation Module (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: Introduce J722S family of SoCs (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: iot2050: Support IOT2050-SM variant (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: iot2050: Annotate LED nodes (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: iot2050: Factor out DP related bits (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: iot2050: Factor out enabling of USB3 support (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: iot2050: Factor out arduino connector bits (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: iot2050: Disable R5 lockstep for all PG2 boards (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: verdin-am62: Set VDD CORE minimum voltage to 0.75V (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am62-wakeup: Configure ti-sysc for wkup_uart0 (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: am62-phyboard-lyra: Add overlay to enable a GPIO fan (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: verdin-am62: add support for Verdin USB1 interface (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: Add DT overlay for PCIe + USB3.0 SERDES personality card (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: Add DT overlay for PCIe + USB2.0 SERDES personality card (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am62a: Make the main_conf node a simple-bus (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am62: Make the main_conf node a simple-bus (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j7200: Make the FSS node a simple-bus (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j721s2: Convert serdes_ln_ctrl node into reg-mux (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j721s2: Convert usb_serdes_mux node into reg-mux (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j721e: Convert usb_serdes_mux node into reg-mux (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j721e: Convert serdes_ln_ctrl node into reg-mux (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j7200: Convert usb_serdes_mux node into reg-mux (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j7200: Convert serdes_ln_ctrl node into reg-mux (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am64: Convert serdes_ln_ctrl node into reg-mux (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: Makefile: Clarify GPL-2.0 as GPL-2.0-only (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: iot2050*: Clarify GPL-2.0 as GPL-2.0-only (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: phycore*: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: beagle*: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-serdes: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-pinctrl: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j721s2: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j721e: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j7200: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am65: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am64: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am62p: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am625: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am62a7: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: Use https for urls (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j7200: use ti,j7200-padconf compatible (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: Makefile: Add HDMI audio check for AM62A7-SK (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am62a7-sk: Add HDMI support (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am62a-main: Add node for Display SubSystem (DSS) (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: phycore-am64: Add ADC (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j7200: Add support for multiple CAN instances (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j7200-som-p0: Add support for CAN instance 0 in main domain (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j7200: Add support for CAN nodes (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: verdin-am62: mallow: add TPM device (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am64: Remove PCIe endpoint node (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am65: Remove PCIe endpoint nodes (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j7200: Remove PCIe endpoint node (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j7200: Enable PCIe nodes at the board level (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j721s2-som-p0: Do not split single items (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j721e-som-p0: Do not split single items (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j721e-sk: Do not split single items (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j721e-beagleboneai64: Do not split single items (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-j7200-som-p0: Do not split single items (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am69-sk: Do not split single items (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am68-sk-som: Do not split single items (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am654-base-board: Do not split single items (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: iot2050: Do not split single items (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am642-sk: Do not split single items (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am642-evm: Do not split single items (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am642-phyboard-electra: Add TPM support (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: Disable clock output of the ethernet PHY (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am625-beagleplay: Use the builtin mdio bus (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am625-beagleplay: Add boot phase tags for USB0 (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am625-sk: Add boot phase tags for USB0 (Andrew Halaney) [RHEL-44742]
- arm64: dts: ti: k3-am654-main: Add device tree entry for SGX GPU (Andrew Halaney) [RHEL-44742]
- openvswitch: get related ct labels from its master if it is not confirmed (Xin Long) [RHEL-44560]
- block: refine the EOF check in blkdev_iomap_begin (Ming Lei) [RHEL-43906] {CVE-2024-38604}
- mm/userfaultfd: reset ptes when close() for wr-protected ones (Nico Pache) [RHEL-39639] {CVE-2024-36881}
- scsi: mpi3mr: Fix printk() format strings (Ewan D. Milne) [RHEL-18205]
- scsi: mpi3mr: Update driver version to 8.5.1.0.0 (Ewan D. Milne) [RHEL-18205]
- scsi: mpi3mr: Support for preallocation of SGL BSG data buffers part-3 (Ewan D. Milne) [RHEL-18205]
- scsi: mpi3mr: Support for preallocation of SGL BSG data buffers part-2 (Ewan D. Milne) [RHEL-18205]
- scsi: mpi3mr: Support for preallocation of SGL BSG data buffers part-1 (Ewan D. Milne) [RHEL-18205]
- x86/mce: Dynamically size space for machine check records (Aristeu Rozanski) [RHEL-24864]
Resolves: RHEL-18205, RHEL-24864, RHEL-39639, RHEL-43906, RHEL-44560, RHEL-44742, RHEL-46919

Signed-off-by: Lucas Zampieri <lzampier@redhat.com>
---
 Makefile.rhelver |   2 +-
 kernel.changelog | 194 +++++++++++++++++++++++++++++++++++++++++++++
 kernel.spec      | 201 ++++++++++++++++++++++++++++++++++++++++++++++-
 sources          |   6 +-
 4 files changed, 395 insertions(+), 8 deletions(-)

diff --git a/Makefile.rhelver b/Makefile.rhelver
index 116c9226a..f2e6e3590 100644
--- a/Makefile.rhelver
+++ b/Makefile.rhelver
@@ -12,7 +12,7 @@ RHEL_MINOR = 5
 #
 # Use this spot to avoid future merge conflicts.
 # Do not trim this comment.
-RHEL_RELEASE = 483
+RHEL_RELEASE = 484
 
 #
 # ZSTREAM
diff --git a/kernel.changelog b/kernel.changelog
index 324ac4ebd..ce7c478d2 100644
--- a/kernel.changelog
+++ b/kernel.changelog
@@ -1,3 +1,197 @@
+* Thu Jul 18 2024 Lucas Zampieri <lzampier@redhat.com> [5.14.0-484.el9]
+- bonding: Fix out-of-bounds read in bond_option_arp_ip_targets_set() (CKI Backport Bot) [RHEL-46919] {CVE-2024-39487}
+- phy: ti: gmii-sel: Enable SGMII mode for J784S4 (Andrew Halaney) [RHEL-44742]
+- phy: ti: gmii-sel: Fix register offset when parent is not a syscon node (Andrew Halaney) [RHEL-44742]
+- phy: ti: gmii-sel: Allow parent to not be syscon node (Andrew Halaney) [RHEL-44742]
+- phy: ti: gmii-sel: Enable USXGMII mode for J784S4 (Andrew Halaney) [RHEL-44742]
+- phy: ti: gmii-sel: Add support for CPSW9G GMII SEL in J784S4 (Andrew Halaney) [RHEL-44742]
+- phy: ti: gmii-sel: Enable SGMII mode for J721E (Andrew Halaney) [RHEL-44742]
+- phy: ti: gmii-sel: Enable SGMII mode for J7200 (Andrew Halaney) [RHEL-44742]
+- phy: ti: gmii-sel: Add support for SGMII mode (Andrew Halaney) [RHEL-44742]
+- phy: ti: gmii-sel: Add support for CPSW9G GMII SEL in J721e (Andrew Halaney) [RHEL-44742]
+- phy: ti: gmii-sel: Update methods for fetching and using qsgmii main port (Andrew Halaney) [RHEL-44742]
+- phy: ti: gmii-sel: Add support for CPSW5G GMII SEL in J7200 (Andrew Halaney) [RHEL-44742]
+- phy: ti: gmii-sel: check of_get_address() for failure (Andrew Halaney) [RHEL-44742]
+- clk: keystone: syscon-clk: Fix audio refclk (Andrew Halaney) [RHEL-44742]
+- clk: keystone: syscon-clk: Add support for audio refclk (Andrew Halaney) [RHEL-44742]
+- clk: keystone: syscon-clk: Allow the clock node to not be of type syscon (Andrew Halaney) [RHEL-44742]
+- clk: keystone: syscon-clk: Use dev_err_probe() helper (Andrew Halaney) [RHEL-44742]
+- clk: keystone: syscon-clk: Add support for AM62 epwm-tbclk (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j784s4-evm: Consolidate serdes0 references (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j784s4-evm: Assign only lanes 0 and 1 to PCIe1 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j784s4-main: Add node for EHRPWMs (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am69-sk: Add PCIe support (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j784s4-evm: Add overlay for PCIe0 and PCIe1 EP Mode (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j784s4-evm: Enable PCIe0 and PCIe1 in RC Mode (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j784s4-main: Add PCIe nodes (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j784s4-evm: Add TPS62873 node (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am69-sk: Add TPS62873 node (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j784s4-evm: Enable USB3 support (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j784s4-main: Add support for USB (Andrew Halaney) [RHEL-44742]
+- arm64: boot: dts: ti: k3-*: Add memory node to bootloader stage (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j784s4: Add overlay for dual port USXGMII mode (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j784s4-evm: Add support for multiple CAN instances (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j784s4: Add overlay to enable QSGMII mode with CPSW9G (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j784s4-evm: Enable Main CPSW2G node and add aliases for it (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j784s4-main: Add CPSW2G and CPSW9G nodes (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j784s4-evm: Add alias for MCU CPSW2G (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: Fix csi2-dual-imx219 dtb names (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am625-beagleplay: Fix Ethernet PHY RESET GPIOs (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Add USB-C (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721s2: Add main esm address range (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721s2-main: Enable support for SDR104 speed mode (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62a: Enable UHS mode support for SD cards (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am65-main: Remove unused properties in sdhci nodes (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am65-main: Fix sdhci node properties (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j722s-evm: Enable UHS support for MMCSD (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: Enable overlays for the am625-phyboard-lyra (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: am64-phyboard-electra: Add overlay to enable a GPIO fan (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62a-main: Add Wave5 Video Encoder/Decoder Node (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am69-sk: Fix UART pin type and macro type (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62-verdin-dahlia: support sleep-moci (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62-verdin: replace sleep-moci hog with regulator (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62a: Disable USB LPM (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62p: add the USB sub-system (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62/a: use sub-node for USB_PHY_CTRL registers (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62*: Add PHY2 region to USB wrapper node (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: iot2050: Add icssg-prueth nodes for PG1 devices (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Add Audio Codec (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721e: Use exact ranges for FSS node (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j7200: Use exact ranges for FSS node (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am65: Use exact ranges for FSS node (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am65: Move SerDes mux nodes under the control node (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am65: Add full compatible to SerDes control nodes (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j722s-evm: Enable eMMC support (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-{am62p,j722s}: Disable ethernet by default (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am642-phyboard-electra-rdk: Increase CAN max bitrate (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Increase CAN max bitrate (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am625-verdin: add PCIe reset gpio hog (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: verdin-am62: mallow: fix GPIOs pinctrl (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721s2: Remove UART baud rate selection (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721e: Remove UART baud rate selection (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j7200: Remove UART baud rate selection (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am64: Remove UART baud rate selection (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am65: Remove UART baud rate selection (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62-lp-sk: Remove tps65219 power-button (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am625-beagleplay: Use mmc-pwrseq for wl18xx enable (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: verdin-am62: use SD1 CD as GPIO (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: verdin-am62: Set memory size to 2gb (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: verdin-am62: dahlia: fix audio clock (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62p5-sk: minor whitespace cleanup (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: hummingboard-t: add overlays for m.2 pci-e and usb-3 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: add description for solidrun am642 som and evaluation board (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62p: Add Wave5 Video Encoder/Decoder Node (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721s2-main: Add Wave5 Video Encoder/Decoder Node (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am69-sk: Add support for OSPI flash (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am69-sk: Enable CAN interfaces for AM69 SK board (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: Enable overlays for SK-AM62P (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62p: Add nodes for CSI-RX (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62p: Add DMASS1 for CSI (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j722s-evm: Enable OSPI NOR support (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j722s-evm: Enable CPSW3G RGMII1 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721e: Fix mux-reg-masks in hbmc_mux (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: Add common1 register space for AM62A SoC (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: Add common1 register space for AM65x SoC (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am642-evm: add overlay for ICSSG1 2nd port (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am642-evm: add ICSSG1 Ethernet support (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am64-main: Add ICSSG IEP nodes (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am6*: Add bootph-all property in MMC node (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am6*: Fix bus-width property in MMC nodes (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am6*: Fix ti,clkbuf-sel property in MMC nodes (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am6*: Remove DLL properties for soft PHYs (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62p: Add ITAP/OTAP values for MMC (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am64-main: Fix ITAP/OTAP values for MMC (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62a7-sk: Enable eMMC support (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62a-main: Add sdhci2 instance (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62a-main: Add sdhci0 instance (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721e-sk: Add overlay for IMX219 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721s2-main: Add CSI2RX capture nodes (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721e-main: Add CSI2RX capture nodes (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721e-sk: Model CSI2RX connector mux (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am69-sk: Enable camera peripherals (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am68-sk-base-board: Enable camera peripherals (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721s2-common-proc-board: Enable camera peripherals (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: Add reserved memory for watchdog (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: Add support for TI J722S Evaluation Module (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: Introduce J722S family of SoCs (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: iot2050: Support IOT2050-SM variant (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: iot2050: Annotate LED nodes (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: iot2050: Factor out DP related bits (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: iot2050: Factor out enabling of USB3 support (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: iot2050: Factor out arduino connector bits (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: iot2050: Disable R5 lockstep for all PG2 boards (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: verdin-am62: Set VDD CORE minimum voltage to 0.75V (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62-wakeup: Configure ti-sysc for wkup_uart0 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: am62-phyboard-lyra: Add overlay to enable a GPIO fan (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: verdin-am62: add support for Verdin USB1 interface (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: Add DT overlay for PCIe + USB3.0 SERDES personality card (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: Add DT overlay for PCIe + USB2.0 SERDES personality card (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62a: Make the main_conf node a simple-bus (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62: Make the main_conf node a simple-bus (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j7200: Make the FSS node a simple-bus (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721s2: Convert serdes_ln_ctrl node into reg-mux (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721s2: Convert usb_serdes_mux node into reg-mux (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721e: Convert usb_serdes_mux node into reg-mux (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721e: Convert serdes_ln_ctrl node into reg-mux (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j7200: Convert usb_serdes_mux node into reg-mux (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j7200: Convert serdes_ln_ctrl node into reg-mux (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am64: Convert serdes_ln_ctrl node into reg-mux (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: Makefile: Clarify GPL-2.0 as GPL-2.0-only (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: iot2050*: Clarify GPL-2.0 as GPL-2.0-only (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: phycore*: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: beagle*: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-serdes: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-pinctrl: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721s2: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721e: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j7200: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am65: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am64: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62p: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am625: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62a7: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: Use https for urls (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j7200: use ti,j7200-padconf compatible (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: Makefile: Add HDMI audio check for AM62A7-SK (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62a7-sk: Add HDMI support (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62a-main: Add node for Display SubSystem (DSS) (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: phycore-am64: Add ADC (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j7200: Add support for multiple CAN instances (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j7200-som-p0: Add support for CAN instance 0 in main domain (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j7200: Add support for CAN nodes (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: verdin-am62: mallow: add TPM device (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am64: Remove PCIe endpoint node (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am65: Remove PCIe endpoint nodes (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j7200: Remove PCIe endpoint node (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j7200: Enable PCIe nodes at the board level (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721s2-som-p0: Do not split single items (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721e-som-p0: Do not split single items (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721e-sk: Do not split single items (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721e-beagleboneai64: Do not split single items (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j7200-som-p0: Do not split single items (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am69-sk: Do not split single items (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am68-sk-som: Do not split single items (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am654-base-board: Do not split single items (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: iot2050: Do not split single items (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am642-sk: Do not split single items (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am642-evm: Do not split single items (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am642-phyboard-electra: Add TPM support (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: Disable clock output of the ethernet PHY (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am625-beagleplay: Use the builtin mdio bus (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am625-beagleplay: Add boot phase tags for USB0 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am625-sk: Add boot phase tags for USB0 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am654-main: Add device tree entry for SGX GPU (Andrew Halaney) [RHEL-44742]
+- openvswitch: get related ct labels from its master if it is not confirmed (Xin Long) [RHEL-44560]
+- block: refine the EOF check in blkdev_iomap_begin (Ming Lei) [RHEL-43906] {CVE-2024-38604}
+- mm/userfaultfd: reset ptes when close() for wr-protected ones (Nico Pache) [RHEL-39639] {CVE-2024-36881}
+- scsi: mpi3mr: Fix printk() format strings (Ewan D. Milne) [RHEL-18205]
+- scsi: mpi3mr: Update driver version to 8.5.1.0.0 (Ewan D. Milne) [RHEL-18205]
+- scsi: mpi3mr: Support for preallocation of SGL BSG data buffers part-3 (Ewan D. Milne) [RHEL-18205]
+- scsi: mpi3mr: Support for preallocation of SGL BSG data buffers part-2 (Ewan D. Milne) [RHEL-18205]
+- scsi: mpi3mr: Support for preallocation of SGL BSG data buffers part-1 (Ewan D. Milne) [RHEL-18205]
+- x86/mce: Dynamically size space for machine check records (Aristeu Rozanski) [RHEL-24864]
+Resolves: RHEL-18205, RHEL-24864, RHEL-39639, RHEL-43906, RHEL-44560, RHEL-44742, RHEL-46919
+
 * Wed Jul 17 2024 Lucas Zampieri <lzampier@redhat.com> [5.14.0-483.el9]
 - powerpc/eeh: avoid possible crash when edev->pdev changes (Mamatha Inamdar) [RHEL-45149]
 - mm/shmem: disable PMD-sized page cache if needed (Donald Dutile) [RHEL-14441]
diff --git a/kernel.spec b/kernel.spec
index 4b447300b..6c5dad3b4 100755
--- a/kernel.spec
+++ b/kernel.spec
@@ -165,15 +165,15 @@ Summary: The Linux kernel
 # define buildid .local
 %define specversion 5.14.0
 %define patchversion 5.14
-%define pkgrelease 483
+%define pkgrelease 484
 %define kversion 5
-%define tarfile_release 5.14.0-483.el9
+%define tarfile_release 5.14.0-484.el9
 # This is needed to do merge window version magic
 %define patchlevel 14
 # This allows pkg_release to have configurable %%{?dist} tag
-%define specrelease 483%{?buildid}%{?dist}
+%define specrelease 484%{?buildid}%{?dist}
 # This defines the kabi tarball version
-%define kabiversion 5.14.0-483.el9
+%define kabiversion 5.14.0-484.el9
 
 #
 # End of genspec.sh variables
@@ -3753,6 +3753,199 @@ fi
 #
 #
 %changelog
+* Thu Jul 18 2024 Lucas Zampieri <lzampier@redhat.com> [5.14.0-484.el9]
+- bonding: Fix out-of-bounds read in bond_option_arp_ip_targets_set() (CKI Backport Bot) [RHEL-46919] {CVE-2024-39487}
+- phy: ti: gmii-sel: Enable SGMII mode for J784S4 (Andrew Halaney) [RHEL-44742]
+- phy: ti: gmii-sel: Fix register offset when parent is not a syscon node (Andrew Halaney) [RHEL-44742]
+- phy: ti: gmii-sel: Allow parent to not be syscon node (Andrew Halaney) [RHEL-44742]
+- phy: ti: gmii-sel: Enable USXGMII mode for J784S4 (Andrew Halaney) [RHEL-44742]
+- phy: ti: gmii-sel: Add support for CPSW9G GMII SEL in J784S4 (Andrew Halaney) [RHEL-44742]
+- phy: ti: gmii-sel: Enable SGMII mode for J721E (Andrew Halaney) [RHEL-44742]
+- phy: ti: gmii-sel: Enable SGMII mode for J7200 (Andrew Halaney) [RHEL-44742]
+- phy: ti: gmii-sel: Add support for SGMII mode (Andrew Halaney) [RHEL-44742]
+- phy: ti: gmii-sel: Add support for CPSW9G GMII SEL in J721e (Andrew Halaney) [RHEL-44742]
+- phy: ti: gmii-sel: Update methods for fetching and using qsgmii main port (Andrew Halaney) [RHEL-44742]
+- phy: ti: gmii-sel: Add support for CPSW5G GMII SEL in J7200 (Andrew Halaney) [RHEL-44742]
+- phy: ti: gmii-sel: check of_get_address() for failure (Andrew Halaney) [RHEL-44742]
+- clk: keystone: syscon-clk: Fix audio refclk (Andrew Halaney) [RHEL-44742]
+- clk: keystone: syscon-clk: Add support for audio refclk (Andrew Halaney) [RHEL-44742]
+- clk: keystone: syscon-clk: Allow the clock node to not be of type syscon (Andrew Halaney) [RHEL-44742]
+- clk: keystone: syscon-clk: Use dev_err_probe() helper (Andrew Halaney) [RHEL-44742]
+- clk: keystone: syscon-clk: Add support for AM62 epwm-tbclk (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j784s4-evm: Consolidate serdes0 references (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j784s4-evm: Assign only lanes 0 and 1 to PCIe1 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j784s4-main: Add node for EHRPWMs (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am69-sk: Add PCIe support (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j784s4-evm: Add overlay for PCIe0 and PCIe1 EP Mode (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j784s4-evm: Enable PCIe0 and PCIe1 in RC Mode (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j784s4-main: Add PCIe nodes (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j784s4-evm: Add TPS62873 node (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am69-sk: Add TPS62873 node (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j784s4-evm: Enable USB3 support (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j784s4-main: Add support for USB (Andrew Halaney) [RHEL-44742]
+- arm64: boot: dts: ti: k3-*: Add memory node to bootloader stage (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j784s4: Add overlay for dual port USXGMII mode (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j784s4-evm: Add support for multiple CAN instances (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j784s4: Add overlay to enable QSGMII mode with CPSW9G (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j784s4-evm: Enable Main CPSW2G node and add aliases for it (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j784s4-main: Add CPSW2G and CPSW9G nodes (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j784s4-evm: Add alias for MCU CPSW2G (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: Fix csi2-dual-imx219 dtb names (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am625-beagleplay: Fix Ethernet PHY RESET GPIOs (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Add USB-C (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721s2: Add main esm address range (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721s2-main: Enable support for SDR104 speed mode (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62a: Enable UHS mode support for SD cards (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am65-main: Remove unused properties in sdhci nodes (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am65-main: Fix sdhci node properties (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j722s-evm: Enable UHS support for MMCSD (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: Enable overlays for the am625-phyboard-lyra (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: am64-phyboard-electra: Add overlay to enable a GPIO fan (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62a-main: Add Wave5 Video Encoder/Decoder Node (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am69-sk: Fix UART pin type and macro type (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62-verdin-dahlia: support sleep-moci (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62-verdin: replace sleep-moci hog with regulator (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62a: Disable USB LPM (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62p: add the USB sub-system (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62/a: use sub-node for USB_PHY_CTRL registers (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62*: Add PHY2 region to USB wrapper node (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: iot2050: Add icssg-prueth nodes for PG1 devices (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Add Audio Codec (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721e: Use exact ranges for FSS node (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j7200: Use exact ranges for FSS node (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am65: Use exact ranges for FSS node (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am65: Move SerDes mux nodes under the control node (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am65: Add full compatible to SerDes control nodes (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j722s-evm: Enable eMMC support (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-{am62p,j722s}: Disable ethernet by default (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am642-phyboard-electra-rdk: Increase CAN max bitrate (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Increase CAN max bitrate (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am625-verdin: add PCIe reset gpio hog (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: verdin-am62: mallow: fix GPIOs pinctrl (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721s2: Remove UART baud rate selection (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721e: Remove UART baud rate selection (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j7200: Remove UART baud rate selection (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am64: Remove UART baud rate selection (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am65: Remove UART baud rate selection (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62-lp-sk: Remove tps65219 power-button (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am625-beagleplay: Use mmc-pwrseq for wl18xx enable (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: verdin-am62: use SD1 CD as GPIO (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: verdin-am62: Set memory size to 2gb (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: verdin-am62: dahlia: fix audio clock (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62p5-sk: minor whitespace cleanup (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: hummingboard-t: add overlays for m.2 pci-e and usb-3 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: add description for solidrun am642 som and evaluation board (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62p: Add Wave5 Video Encoder/Decoder Node (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721s2-main: Add Wave5 Video Encoder/Decoder Node (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am69-sk: Add support for OSPI flash (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am69-sk: Enable CAN interfaces for AM69 SK board (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: Enable overlays for SK-AM62P (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62p: Add nodes for CSI-RX (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62p: Add DMASS1 for CSI (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j722s-evm: Enable OSPI NOR support (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j722s-evm: Enable CPSW3G RGMII1 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721e: Fix mux-reg-masks in hbmc_mux (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: Add common1 register space for AM62A SoC (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: Add common1 register space for AM65x SoC (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am642-evm: add overlay for ICSSG1 2nd port (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am642-evm: add ICSSG1 Ethernet support (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am64-main: Add ICSSG IEP nodes (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am6*: Add bootph-all property in MMC node (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am6*: Fix bus-width property in MMC nodes (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am6*: Fix ti,clkbuf-sel property in MMC nodes (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am6*: Remove DLL properties for soft PHYs (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62p: Add ITAP/OTAP values for MMC (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am64-main: Fix ITAP/OTAP values for MMC (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62a7-sk: Enable eMMC support (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62a-main: Add sdhci2 instance (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62a-main: Add sdhci0 instance (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721e-sk: Add overlay for IMX219 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721s2-main: Add CSI2RX capture nodes (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721e-main: Add CSI2RX capture nodes (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721e-sk: Model CSI2RX connector mux (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am69-sk: Enable camera peripherals (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am68-sk-base-board: Enable camera peripherals (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721s2-common-proc-board: Enable camera peripherals (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: Add reserved memory for watchdog (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: Add support for TI J722S Evaluation Module (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: Introduce J722S family of SoCs (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: iot2050: Support IOT2050-SM variant (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: iot2050: Annotate LED nodes (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: iot2050: Factor out DP related bits (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: iot2050: Factor out enabling of USB3 support (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: iot2050: Factor out arduino connector bits (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: iot2050: Disable R5 lockstep for all PG2 boards (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: verdin-am62: Set VDD CORE minimum voltage to 0.75V (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62-wakeup: Configure ti-sysc for wkup_uart0 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: am62-phyboard-lyra: Add overlay to enable a GPIO fan (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: verdin-am62: add support for Verdin USB1 interface (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: Add DT overlay for PCIe + USB3.0 SERDES personality card (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: Add DT overlay for PCIe + USB2.0 SERDES personality card (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62a: Make the main_conf node a simple-bus (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62: Make the main_conf node a simple-bus (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j7200: Make the FSS node a simple-bus (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721s2: Convert serdes_ln_ctrl node into reg-mux (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721s2: Convert usb_serdes_mux node into reg-mux (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721e: Convert usb_serdes_mux node into reg-mux (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721e: Convert serdes_ln_ctrl node into reg-mux (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j7200: Convert usb_serdes_mux node into reg-mux (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j7200: Convert serdes_ln_ctrl node into reg-mux (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am64: Convert serdes_ln_ctrl node into reg-mux (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: Makefile: Clarify GPL-2.0 as GPL-2.0-only (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: iot2050*: Clarify GPL-2.0 as GPL-2.0-only (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: phycore*: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: beagle*: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-serdes: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-pinctrl: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721s2: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721e: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j7200: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am65: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am64: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62p: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am625: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62a7: Add MIT license along with GPL-2.0 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: Use https for urls (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j7200: use ti,j7200-padconf compatible (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: Makefile: Add HDMI audio check for AM62A7-SK (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62a7-sk: Add HDMI support (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am62a-main: Add node for Display SubSystem (DSS) (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: phycore-am64: Add ADC (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j7200: Add support for multiple CAN instances (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j7200-som-p0: Add support for CAN instance 0 in main domain (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j7200: Add support for CAN nodes (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: verdin-am62: mallow: add TPM device (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am64: Remove PCIe endpoint node (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am65: Remove PCIe endpoint nodes (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j7200: Remove PCIe endpoint node (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j7200: Enable PCIe nodes at the board level (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721s2-som-p0: Do not split single items (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721e-som-p0: Do not split single items (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721e-sk: Do not split single items (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j721e-beagleboneai64: Do not split single items (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-j7200-som-p0: Do not split single items (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am69-sk: Do not split single items (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am68-sk-som: Do not split single items (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am654-base-board: Do not split single items (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: iot2050: Do not split single items (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am642-sk: Do not split single items (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am642-evm: Do not split single items (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am642-phyboard-electra: Add TPM support (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: Disable clock output of the ethernet PHY (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am625-beagleplay: Use the builtin mdio bus (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am625-beagleplay: Add boot phase tags for USB0 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am625-sk: Add boot phase tags for USB0 (Andrew Halaney) [RHEL-44742]
+- arm64: dts: ti: k3-am654-main: Add device tree entry for SGX GPU (Andrew Halaney) [RHEL-44742]
+- openvswitch: get related ct labels from its master if it is not confirmed (Xin Long) [RHEL-44560]
+- block: refine the EOF check in blkdev_iomap_begin (Ming Lei) [RHEL-43906] {CVE-2024-38604}
+- mm/userfaultfd: reset ptes when close() for wr-protected ones (Nico Pache) [RHEL-39639] {CVE-2024-36881}
+- scsi: mpi3mr: Fix printk() format strings (Ewan D. Milne) [RHEL-18205]
+- scsi: mpi3mr: Update driver version to 8.5.1.0.0 (Ewan D. Milne) [RHEL-18205]
+- scsi: mpi3mr: Support for preallocation of SGL BSG data buffers part-3 (Ewan D. Milne) [RHEL-18205]
+- scsi: mpi3mr: Support for preallocation of SGL BSG data buffers part-2 (Ewan D. Milne) [RHEL-18205]
+- scsi: mpi3mr: Support for preallocation of SGL BSG data buffers part-1 (Ewan D. Milne) [RHEL-18205]
+- x86/mce: Dynamically size space for machine check records (Aristeu Rozanski) [RHEL-24864]
+
 * Wed Jul 17 2024 Lucas Zampieri <lzampier@redhat.com> [5.14.0-483.el9]
 - powerpc/eeh: avoid possible crash when edev->pdev changes (Mamatha Inamdar) [RHEL-45149]
 - mm/shmem: disable PMD-sized page cache if needed (Donald Dutile) [RHEL-14441]
diff --git a/sources b/sources
index e36afeea7..4b909009a 100644
--- a/sources
+++ b/sources
@@ -1,3 +1,3 @@
-SHA512 (linux-5.14.0-483.el9.tar.xz) = 1c5358aa43fedd346d3a00f0318c9848a3b90c8782919bfc6ed1741d6e28180009f21352e8985acbdcf3098a1cb44fbf6fe45de9568b23be77213eb67d3c38c1
-SHA512 (kernel-abi-stablelists-5.14.0-483.el9.tar.bz2) = 93f3891b6b533dbba1dd87cab88c18a9ef0358ec50dd1ae60b60adfaa3b591374f6ae550ad1bd0ea661811f64e45154bcd608ac5eec02e905ea1c7cfb2bc392f
-SHA512 (kernel-kabi-dw-5.14.0-483.el9.tar.bz2) = f457713ced0439861c4afb630f3f9a9c70ca92a9a9b5df963dfd843ba7f63d96eee6a43a998be8a328b19178d806c465f2f129104b17fc848c84c4cd22492963
+SHA512 (linux-5.14.0-484.el9.tar.xz) = 26db26eb99cc8e6b7c7c8a03608fbdc287b497edb0be70edd336c71f9c31adb33ae412e6d7c8aea9454da153323aa80afe2e5c9680060c2b795ea3e47bd340b4
+SHA512 (kernel-abi-stablelists-5.14.0-484.el9.tar.bz2) = 02ea19f0720b0248b3ab0329c94e74c7ebffc5d97f04c666285da7fb45444508a88399d6b3ae5515a2c1cb99459855bc6bce3fd1efac77c7e477216fe74ced72
+SHA512 (kernel-kabi-dw-5.14.0-484.el9.tar.bz2) = 539bf72bbaa177e9ef2b57ab56bda3f4c7560c8b23bbfec5ecbbcbc92cd7753be7e18ca7e4bd562139ac3dec852d6c8170e0519ba503bfc3de6997ca89a96ceb